diff options
| author |   Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> | 2021-01-07 14:23:55 +0200 |
|---|---|---|
| committer |   Mark Brown <broonie@kernel.org> | 2021-01-07 16:15:01 +0000 |
| commit | 907dfdc945aa3d183cdc6a81b963ee3b42ece306 (patch) | |
| tree | afca18e6ccda0a231c48fd6af6ff284d6edfd107 /drivers/regulator/bd718x7-regulator.c | |
| parent | Merge series "Add driver for dvfsrc, support for active state of scpsys" from Henry Chen <henryc.chen@mediatek.com>: (diff) | |
| download | linux-dev-907dfdc945aa3d183cdc6a81b963ee3b42ece306.tar.xz linux-dev-907dfdc945aa3d183cdc6a81b963ee3b42ece306.zip | |
regulator: bd718x7: Stop using parent data
The ROHM PMIC regulator drivers only need the regmap pointer from
the parent device. Regmap can be obtained via dev_get_regmap()
so do not require parent to populate driver data for that.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210107122355.GA35080@localhost.localdomain
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator/bd718x7-regulator.c')
| -rw-r--r-- | drivers/regulator/bd718x7-regulator.c | 20 |
1 files changed, 9 insertions, 11 deletions
diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c index 9309765d0450..8ff47ea522d6 100644 --- a/drivers/regulator/bd718x7-regulator.c +++ b/drivers/regulator/bd718x7-regulator.c @@ -1554,7 +1554,7 @@ err_out: static int bd718xx_probe(struct platform_device *pdev) { - struct bd718xx *mfd; + struct regmap *regmap; struct regulator_config config = { 0 }; int i, j, err, omit_enable; bool use_snvs; @@ -1563,11 +1563,10 @@ static int bd718xx_probe(struct platform_device *pdev) enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data; const struct regulator_ops **swops, **hwops; - mfd = dev_get_drvdata(pdev->dev.parent); - if (!mfd) { + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) { dev_err(&pdev->dev, "No MFD driver data\n"); - err = -EINVAL; - goto err; + return -EINVAL; } switch (chip) { @@ -1590,7 +1589,7 @@ static int bd718xx_probe(struct platform_device *pdev) } /* Register LOCK release */ - err = regmap_update_bits(mfd->chip.regmap, BD718XX_REG_REGLOCK, + err = regmap_update_bits(regmap, BD718XX_REG_REGLOCK, (REGLOCK_PWRSEQ | REGLOCK_VREG), 0); if (err) { dev_err(&pdev->dev, "Failed to unlock PMIC (%d)\n", err); @@ -1609,8 +1608,7 @@ static int bd718xx_probe(struct platform_device *pdev) * bit allowing HW defaults for power rails to be used */ if (!use_snvs) { - err = regmap_update_bits(mfd->chip.regmap, - BD718XX_REG_TRANS_COND1, + err = regmap_update_bits(regmap, BD718XX_REG_TRANS_COND1, BD718XX_ON_REQ_POWEROFF_MASK | BD718XX_SWRESET_POWEROFF_MASK | BD718XX_WDOG_POWEROFF_MASK | @@ -1626,7 +1624,7 @@ static int bd718xx_probe(struct platform_device *pdev) } config.dev = pdev->dev.parent; - config.regmap = mfd->chip.regmap; + config.regmap = regmap; /* * There are cases when we want to leave the enable-control for * the HW state machine and use this driver only for voltage control. @@ -1685,7 +1683,7 @@ static int bd718xx_probe(struct platform_device *pdev) if (!no_enable_control && (!use_snvs || !rdev->constraints->always_on || !rdev->constraints->boot_on)) { - err = regmap_update_bits(mfd->chip.regmap, r->init.reg, + err = regmap_update_bits(regmap, r->init.reg, r->init.mask, r->init.val); if (err) { dev_err(&pdev->dev, @@ -1695,7 +1693,7 @@ static int bd718xx_probe(struct platform_device *pdev) } } for (j = 0; j < r->additional_init_amnt; j++) { - err = regmap_update_bits(mfd->chip.regmap, + err = regmap_update_bits(regmap, r->additional_inits[j].reg, r->additional_inits[j].mask, r->additional_inits[j].val); |