Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) BPF debugger and asm tool by Daniel Borkmann.

 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.

 3) Correct reciprocal_divide and update users, from Hannes Frederic
    Sowa and Daniel Borkmann.

 4) Currently we only have a "set" operation for the hw timestamp socket
    ioctl, add a "get" operation to match.  From Ben Hutchings.

 5) Add better trace events for debugging driver datapath problems, also
    from Ben Hutchings.

 6) Implement auto corking in TCP, from Eric Dumazet.  Basically, if we
    have a small send and a previous packet is already in the qdisc or
    device queue, defer until TX completion or we get more data.

 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.

 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
    Borkmann.

 9) Share IP header compression code between Bluetooth and IEEE802154
    layers, from Jukka Rissanen.

10) Fix ipv6 router reachability probing, from Jiri Benc.

11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.

12) Support tunneling in GRO layer, from Jerry Chu.

13) Allow bonding to be configured fully using netlink, from Scott
    Feldman.

14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
    already get the TCI.  From Atzm Watanabe.

15) New "Heavy Hitter" qdisc, from Terry Lam.

16) Significantly improve the IPSEC support in pktgen, from Fan Du.

17) Allow ipv4 tunnels to cache routes, just like sockets.  From Tom
    Herbert.

18) Add Proportional Integral Enhanced packet scheduler, from Vijay
    Subramanian.

19) Allow openvswitch to mmap'd netlink, from Thomas Graf.

20) Key TCP metrics blobs also by source address, not just destination
    address.  From Christoph Paasch.

21) Support 10G in generic phylib.  From Andy Fleming.

22) Try to short-circuit GRO flow compares using device provided RX
    hash, if provided.  From Tom Herbert.

The wireless and netfilter folks have been busy little bees too.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
  net/cxgb4: Fix referencing freed adapter
  ipv6: reallocate addrconf router for ipv6 address when lo device up
  fib_frontend: fix possible NULL pointer dereference
  rtnetlink: remove IFLA_BOND_SLAVE definition
  rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
  qlcnic: update version to 5.3.55
  qlcnic: Enhance logic to calculate msix vectors.
  qlcnic: Refactor interrupt coalescing code for all adapters.
  qlcnic: Update poll controller code path
  qlcnic: Interrupt code cleanup
  qlcnic: Enhance Tx timeout debugging.
  qlcnic: Use bool for rx_mac_learn.
  bonding: fix u64 division
  rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
  sfc: Use the correct maximum TX DMA ring size for SFC9100
  Add Shradha Shah as the sfc driver maintainer.
  net/vxlan: Share RX skb de-marking and checksum checks with ovs
  tulip: cleanup by using ARRAY_SIZE()
  ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
  net/cxgb4: Don't retrieve stats during recovery
  ...

1 files changed, 166 insertions, 49 deletions

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index eb4e1f809feb..c05dacbf4e23 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -68,7 +68,7 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
 		enum qeth_qdio_buffer_states newbufstate);
 static int qeth_init_qdio_out_buf(struct qeth_qdio_out_q *, int);
 
-static struct workqueue_struct *qeth_wq;
+struct workqueue_struct *qeth_wq;
 
 static void qeth_close_dev_handler(struct work_struct *work)
 {
@@ -615,6 +615,16 @@ static struct qeth_ipa_cmd *qeth_check_ipa_data(struct qeth_card *card,
 					card->info.hwtrap = 2;
 				qeth_schedule_recovery(card);
 				return NULL;
+			case IPA_CMD_SETBRIDGEPORT:
+				if (cmd->data.sbp.hdr.command_code ==
+					IPA_SBP_BRIDGE_PORT_STATE_CHANGE) {
+					qeth_bridge_state_change(card, cmd);
+					return NULL;
+				} else
+					return cmd;
+			case IPA_CMD_ADDRESS_CHANGE_NOTIF:
+				qeth_bridge_host_event(card, cmd);
+				return NULL;
 			case IPA_CMD_MODCCID:
 				return cmd;
 			case IPA_CMD_REGISTER_LOCAL_ADDR:
@@ -4602,6 +4612,42 @@ out:
 }
 EXPORT_SYMBOL_GPL(qeth_query_oat_command);
 
+int qeth_query_card_info_cb(struct qeth_card *card,
+			struct qeth_reply *reply, unsigned long data)
+{
+	struct qeth_ipa_cmd *cmd;
+	struct qeth_query_card_info *card_info;
+	struct carrier_info *carrier_info;
+
+	QETH_CARD_TEXT(card, 2, "qcrdincb");
+	carrier_info = (struct carrier_info *)reply->param;
+	cmd = (struct qeth_ipa_cmd *)data;
+	card_info = &cmd->data.setadapterparms.data.card_info;
+	if (cmd->data.setadapterparms.hdr.return_code == 0) {
+		carrier_info->card_type = card_info->card_type;
+		carrier_info->port_mode = card_info->port_mode;
+		carrier_info->port_speed = card_info->port_speed;
+	}
+
+	qeth_default_setadapterparms_cb(card, reply, (unsigned long) cmd);
+	return 0;
+}
+
+int qeth_query_card_info(struct qeth_card *card,
+				struct carrier_info *carrier_info)
+{
+	struct qeth_cmd_buffer *iob;
+
+	QETH_CARD_TEXT(card, 2, "qcrdinfo");
+	if (!qeth_adp_supported(card, IPA_SETADP_QUERY_CARD_INFO))
+		return -EOPNOTSUPP;
+	iob = qeth_get_adapter_cmd(card, IPA_SETADP_QUERY_CARD_INFO,
+		sizeof(struct qeth_ipacmd_setadpparms_hdr));
+	return qeth_send_ipa_cmd(card, iob, qeth_query_card_info_cb,
+					(void *)carrier_info);
+}
+EXPORT_SYMBOL_GPL(qeth_query_card_info);
+
 static inline int qeth_get_qdio_q_format(struct qeth_card *card)
 {
 	switch (card->info.type) {
@@ -4920,12 +4966,17 @@ retriable:
 
 	card->options.ipa4.supported_funcs = 0;
 	card->options.adp.supported_funcs = 0;
+	card->options.sbp.supported_funcs = 0;
 	card->info.diagass_support = 0;
 	qeth_query_ipassists(card, QETH_PROT_IPV4);
 	if (qeth_is_supported(card, IPA_SETADAPTERPARMS))
 		qeth_query_setadapterparms(card);
 	if (qeth_adp_supported(card, IPA_SETADP_SET_DIAG_ASSIST))
 		qeth_query_setdiagass(card);
+	qeth_bridgeport_query_support(card);
+	if (card->options.sbp.supported_funcs)
+		dev_info(&card->gdev->dev,
+		"The device represents a HiperSockets Bridge Capable Port\n");
 	return 0;
 out:
 	dev_warn(&card->gdev->dev, "The qeth device driver failed to recover "
@@ -5606,11 +5657,65 @@ void qeth_core_get_drvinfo(struct net_device *dev,
 }
 EXPORT_SYMBOL_GPL(qeth_core_get_drvinfo);
 
+/* Helper function to fill 'advertizing' and 'supported' which are the same. */
+/* Autoneg and full-duplex are supported and advertized uncondionally.	     */
+/* Always advertize and support all speeds up to specified, and only one     */
+/* specified port type.							     */
+static void qeth_set_ecmd_adv_sup(struct ethtool_cmd *ecmd,
+				int maxspeed, int porttype)
+{
+	int port_sup, port_adv, spd_sup, spd_adv;
+
+	switch (porttype) {
+	case PORT_TP:
+		port_sup = SUPPORTED_TP;
+		port_adv = ADVERTISED_TP;
+		break;
+	case PORT_FIBRE:
+		port_sup = SUPPORTED_FIBRE;
+		port_adv = ADVERTISED_FIBRE;
+		break;
+	default:
+		port_sup = SUPPORTED_TP;
+		port_adv = ADVERTISED_TP;
+		WARN_ON_ONCE(1);
+	}
+
+	/* "Fallthrough" case'es ordered from high to low result in setting  */
+	/* flags cumulatively, starting from the specified speed and down to */
+	/* the lowest possible.						     */
+	spd_sup = 0;
+	spd_adv = 0;
+	switch (maxspeed) {
+	case SPEED_10000:
+		spd_sup |= SUPPORTED_10000baseT_Full;
+		spd_adv |= ADVERTISED_10000baseT_Full;
+	case SPEED_1000:
+		spd_sup |= SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full;
+		spd_adv |= ADVERTISED_1000baseT_Half |
+						ADVERTISED_1000baseT_Full;
+	case SPEED_100:
+		spd_sup |= SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
+		spd_adv |= ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
+	case SPEED_10:
+		spd_sup |= SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full;
+		spd_adv |= ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full;
+	break;
+	default:
+		spd_sup = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full;
+		spd_adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full;
+		WARN_ON_ONCE(1);
+	}
+	ecmd->advertising = ADVERTISED_Autoneg | port_adv | spd_adv;
+	ecmd->supported = SUPPORTED_Autoneg | port_sup | spd_sup;
+}
+
 int qeth_core_ethtool_get_settings(struct net_device *netdev,
 					struct ethtool_cmd *ecmd)
 {
 	struct qeth_card *card = netdev->ml_priv;
 	enum qeth_link_types link_type;
+	struct carrier_info carrier_info;
 
 	if ((card->info.type == QETH_CARD_TYPE_IQD) || (card->info.guestlan))
 		link_type = QETH_LINK_TYPE_10GBIT_ETH;
@@ -5618,80 +5723,92 @@ int qeth_core_ethtool_get_settings(struct net_device *netdev,
 		link_type = card->info.link_type;
 
 	ecmd->transceiver = XCVR_INTERNAL;
-	ecmd->supported = SUPPORTED_Autoneg;
-	ecmd->advertising = ADVERTISED_Autoneg;
 	ecmd->duplex = DUPLEX_FULL;
 	ecmd->autoneg = AUTONEG_ENABLE;
 
 	switch (link_type) {
 	case QETH_LINK_TYPE_FAST_ETH:
 	case QETH_LINK_TYPE_LANE_ETH100:
-		ecmd->supported |= SUPPORTED_10baseT_Half |
-					SUPPORTED_10baseT_Full |
-					SUPPORTED_100baseT_Half |
-					SUPPORTED_100baseT_Full |
-					SUPPORTED_TP;
-		ecmd->advertising |= ADVERTISED_10baseT_Half |
-					ADVERTISED_10baseT_Full |
-					ADVERTISED_100baseT_Half |
-					ADVERTISED_100baseT_Full |
-					ADVERTISED_TP;
+		qeth_set_ecmd_adv_sup(ecmd, SPEED_100, PORT_TP);
 		ecmd->speed = SPEED_100;
 		ecmd->port = PORT_TP;
 		break;
 
 	case QETH_LINK_TYPE_GBIT_ETH:
 	case QETH_LINK_TYPE_LANE_ETH1000:
-		ecmd->supported |= SUPPORTED_10baseT_Half |
-					SUPPORTED_10baseT_Full |
-					SUPPORTED_100baseT_Half |
-					SUPPORTED_100baseT_Full |
-					SUPPORTED_1000baseT_Half |
-					SUPPORTED_1000baseT_Full |
-					SUPPORTED_FIBRE;
-		ecmd->advertising |= ADVERTISED_10baseT_Half |
-					ADVERTISED_10baseT_Full |
-					ADVERTISED_100baseT_Half |
-					ADVERTISED_100baseT_Full |
-					ADVERTISED_1000baseT_Half |
-					ADVERTISED_1000baseT_Full |
-					ADVERTISED_FIBRE;
+		qeth_set_ecmd_adv_sup(ecmd, SPEED_1000, PORT_FIBRE);
 		ecmd->speed = SPEED_1000;
 		ecmd->port = PORT_FIBRE;
 		break;
 
 	case QETH_LINK_TYPE_10GBIT_ETH:
-		ecmd->supported |= SUPPORTED_10baseT_Half |
-					SUPPORTED_10baseT_Full |
-					SUPPORTED_100baseT_Half |
-					SUPPORTED_100baseT_Full |
-					SUPPORTED_1000baseT_Half |
-					SUPPORTED_1000baseT_Full |
-					SUPPORTED_10000baseT_Full |
-					SUPPORTED_FIBRE;
-		ecmd->advertising |= ADVERTISED_10baseT_Half |
-					ADVERTISED_10baseT_Full |
-					ADVERTISED_100baseT_Half |
-					ADVERTISED_100baseT_Full |
-					ADVERTISED_1000baseT_Half |
-					ADVERTISED_1000baseT_Full |
-					ADVERTISED_10000baseT_Full |
-					ADVERTISED_FIBRE;
+		qeth_set_ecmd_adv_sup(ecmd, SPEED_10000, PORT_FIBRE);
 		ecmd->speed = SPEED_10000;
 		ecmd->port = PORT_FIBRE;
 		break;
 
 	default:
-		ecmd->supported |= SUPPORTED_10baseT_Half |
-					SUPPORTED_10baseT_Full |
-					SUPPORTED_TP;
-		ecmd->advertising |= ADVERTISED_10baseT_Half |
-					ADVERTISED_10baseT_Full |
-					ADVERTISED_TP;
+		qeth_set_ecmd_adv_sup(ecmd, SPEED_10, PORT_TP);
 		ecmd->speed = SPEED_10;
 		ecmd->port = PORT_TP;
 	}
 
+	/* Check if we can obtain more accurate information.	 */
+	/* If QUERY_CARD_INFO command is not supported or fails, */
+	/* just return the heuristics that was filled above.	 */
+	if (qeth_query_card_info(card, &carrier_info) != 0)
+		return 0;
+
+	netdev_dbg(netdev,
+	"card info: card_type=0x%02x, port_mode=0x%04x, port_speed=0x%08x\n",
+			carrier_info.card_type,
+			carrier_info.port_mode,
+			carrier_info.port_speed);
+
+	/* Update attributes for which we've obtained more authoritative */
+	/* information, leave the rest the way they where filled above.  */
+	switch (carrier_info.card_type) {
+	case CARD_INFO_TYPE_1G_COPPER_A:
+	case CARD_INFO_TYPE_1G_COPPER_B:
+		qeth_set_ecmd_adv_sup(ecmd, SPEED_1000, PORT_TP);
+		ecmd->port = PORT_TP;
+		break;
+	case CARD_INFO_TYPE_1G_FIBRE_A:
+	case CARD_INFO_TYPE_1G_FIBRE_B:
+		qeth_set_ecmd_adv_sup(ecmd, SPEED_1000, PORT_FIBRE);
+		ecmd->port = PORT_FIBRE;
+		break;
+	case CARD_INFO_TYPE_10G_FIBRE_A:
+	case CARD_INFO_TYPE_10G_FIBRE_B:
+		qeth_set_ecmd_adv_sup(ecmd, SPEED_10000, PORT_FIBRE);
+		ecmd->port = PORT_FIBRE;
+		break;
+	}
+
+	switch (carrier_info.port_mode) {
+	case CARD_INFO_PORTM_FULLDUPLEX:
+		ecmd->duplex = DUPLEX_FULL;
+		break;
+	case CARD_INFO_PORTM_HALFDUPLEX:
+		ecmd->duplex = DUPLEX_HALF;
+		break;
+	}
+
+	switch (carrier_info.port_speed) {
+	case CARD_INFO_PORTS_10M:
+		ecmd->speed = SPEED_10;
+		break;
+	case CARD_INFO_PORTS_100M:
+		ecmd->speed = SPEED_100;
+		break;
+	case CARD_INFO_PORTS_1G:
+		ecmd->speed = SPEED_1000;
+		break;
+	case CARD_INFO_PORTS_10G:
+		ecmd->speed = SPEED_10000;
+		break;
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(qeth_core_ethtool_get_settings);