diff options
| author |   Rajashekhara, Mahesh <Mahesh_Rajashekhara@adaptec.com> | 2010-05-10 04:24:01 -0700 |
|---|---|---|
| committer |   James Bottomley <James.Bottomley@suse.de> | 2010-05-16 22:49:46 -0400 |
| commit | da3cc679b247a22efe0746d129074015b278e64d (patch) | |
| tree | 4949e9cabd0e3a7df4c840d3185af3a4a7a45849 /drivers/scsi/aacraid | |
| parent | [SCSI] aacraid: add support for handling ATA pass-through commands. (diff) | |
| download | linux-dev-da3cc679b247a22efe0746d129074015b278e64d.tar.xz linux-dev-da3cc679b247a22efe0746d129074015b278e64d.zip | |
[SCSI] aacraid: prohibit access to array container space
Problem description:
--------------------
The issue reported by one of the customer was able to read LBA beyond
the array reported size with "sg_read" utility. If N is the last block
address reported, then should not be able to read past N,
i.e. N+1. But in their case, reported last LBA=143134719. So should
not have been able to read with LBA=143134720, but it is read without
failure, which means reported size to the OS is not correct and is
less than the actual last block address.
Solution:
---------
Firmware layer exposes lesser container capacity than the actual
one. It exposes [Actual size - Spitfire space(10MB)] to the OS, IO's
to the 10MB should be prohibited from the Linux driver. Driver checks
LBA boundary, if its greater than the array reported size then sets
sensekey to HARDWARE_ERROR and sends the notification to the MID
layer.
Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Diffstat (limited to 'drivers/scsi/aacraid')
| -rw-r--r-- | drivers/scsi/aacraid/aachba.c | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index fdc7d9935aeb..7df2dd1d2c6f 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -1608,6 +1608,7 @@ static int aac_read(struct scsi_cmnd * scsicmd) int status; struct aac_dev *dev; struct fib * cmd_fibcontext; + int cid; dev = (struct aac_dev *)scsicmd->device->host->hostdata; /* @@ -1657,6 +1658,22 @@ static int aac_read(struct scsi_cmnd * scsicmd) count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; break; } + + if ((lba + count) > (dev->fsa_dev[scmd_id(scsicmd)].size)) { + cid = scmd_id(scsicmd); + dprintk((KERN_DEBUG "aacraid: Illegal lba\n")); + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | + SAM_STAT_CHECK_CONDITION; + set_sense(&dev->fsa_dev[cid].sense_data, + HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE, + ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0); + memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, + min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), + SCSI_SENSE_BUFFERSIZE)); + scsicmd->scsi_done(scsicmd); + return 1; + } + dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n", smp_processor_id(), (unsigned long long)lba, jiffies)); if (aac_adapter_bounds(dev,scsicmd,lba)) @@ -1698,6 +1715,7 @@ static int aac_write(struct scsi_cmnd * scsicmd) int status; struct aac_dev *dev; struct fib * cmd_fibcontext; + int cid; dev = (struct aac_dev *)scsicmd->device->host->hostdata; /* @@ -1737,6 +1755,22 @@ static int aac_write(struct scsi_cmnd * scsicmd) count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; fua = scsicmd->cmnd[1] & 0x8; } + + if ((lba + count) > (dev->fsa_dev[scmd_id(scsicmd)].size)) { + cid = scmd_id(scsicmd); + dprintk((KERN_DEBUG "aacraid: Illegal lba\n")); + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | + SAM_STAT_CHECK_CONDITION; + set_sense(&dev->fsa_dev[cid].sense_data, + HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE, + ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0); + memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, + min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), + SCSI_SENSE_BUFFERSIZE)); + scsicmd->scsi_done(scsicmd); + return 1; + } + dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n", smp_processor_id(), (unsigned long long)lba, jiffies)); if (aac_adapter_bounds(dev,scsicmd,lba)) |