be2iscsi: Add FW config validation

System crash in I+T card personality.

Fix to add validation for ULP in initiator mode, physical port number,
and supported queue, icd, cid counts.

Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

3 files changed, 125 insertions, 67 deletions

diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index e86eca98a525..bdedcbb16730 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -5667,6 +5667,7 @@ static int beiscsi_dev_probe(struct pci_dev *pcidev,
 		goto free_port;
 	}
 	mgmt_get_port_name(&phba->ctrl, phba);
+	beiscsi_get_params(phba);
 
 	if (enable_msix)
 		find_num_cpus(phba);
@@ -5684,7 +5685,6 @@ static int beiscsi_dev_probe(struct pci_dev *pcidev,
 	}
 
 	phba->shost->max_id = phba->params.cxns_per_ctrl;
-	beiscsi_get_params(phba);
 	phba->shost->can_queue = phba->params.ios_per_ctrl;
 	ret = beiscsi_init_port(phba);
 	if (ret < 0) {
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index c09082aef7ae..f89861be2e39 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -397,7 +397,9 @@ struct beiscsi_hba {
 		 * group together since they are used most frequently
 		 * for cid to cri conversion
 		 */
+#define BEISCSI_PHYS_PORT_MAX	4
 		unsigned int phys_port;
+		/* valid values of phys_port id are 0, 1, 2, 3 */
 		unsigned int eqid_count;
 		unsigned int cqid_count;
 		unsigned int iscsi_cid_start[BEISCSI_ULP_COUNT];
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 5aae153d3a6c..3eea8b884310 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -373,90 +373,146 @@ int mgmt_get_fw_config(struct be_ctrl_info *ctrl,
 				struct beiscsi_hba *phba)
 {
 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
-	struct be_fw_cfg *req = embedded_payload(wrb);
-	int status = 0;
+	struct be_fw_cfg *pfw_cfg = embedded_payload(wrb);
+	uint32_t cid_count, icd_count;
+	int status = -EINVAL;
+	uint8_t ulp_num = 0;
 
 	mutex_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
+	be_wrb_hdr_prepare(wrb, sizeof(*pfw_cfg), true, 0);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
-
-	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+	be_cmd_hdr_prepare(&pfw_cfg->hdr, CMD_SUBSYSTEM_COMMON,
 			   OPCODE_COMMON_QUERY_FIRMWARE_CONFIG,
 			   EMBED_MBX_MAX_PAYLOAD_SIZE);
-	status = be_mbox_notify(ctrl);
-	if (!status) {
-		uint8_t ulp_num = 0;
-		struct be_fw_cfg *pfw_cfg;
-		pfw_cfg = req;
 
-		if (!is_chip_be2_be3r(phba)) {
-			phba->fw_config.eqid_count = pfw_cfg->eqid_count;
-			phba->fw_config.cqid_count = pfw_cfg->cqid_count;
+	if (be_mbox_notify(ctrl)) {
+		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+			    "BG_%d : Failed in mgmt_get_fw_config\n");
+		goto fail_init;
+	}
 
-			beiscsi_log(phba, KERN_INFO,
-				    BEISCSI_LOG_INIT,
-				    "BG_%d : EQ_Count : %d CQ_Count : %d\n",
-				    phba->fw_config.eqid_count,
+	/* FW response formats depend on port id */
+	phba->fw_config.phys_port = pfw_cfg->phys_port;
+	if (phba->fw_config.phys_port >= BEISCSI_PHYS_PORT_MAX) {
+		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+			    "BG_%d : invalid physical port id %d\n",
+			    phba->fw_config.phys_port);
+		goto fail_init;
+	}
+
+	/* populate and check FW config against min and max values */
+	if (!is_chip_be2_be3r(phba)) {
+		phba->fw_config.eqid_count = pfw_cfg->eqid_count;
+		phba->fw_config.cqid_count = pfw_cfg->cqid_count;
+		if (phba->fw_config.eqid_count == 0 ||
+		    phba->fw_config.eqid_count > 2048) {
+			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+				    "BG_%d : invalid EQ count %d\n",
+				    phba->fw_config.eqid_count);
+			goto fail_init;
+		}
+		if (phba->fw_config.cqid_count == 0 ||
+		    phba->fw_config.cqid_count > 4096) {
+			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+				    "BG_%d : invalid CQ count %d\n",
 				    phba->fw_config.cqid_count);
+			goto fail_init;
 		}
+		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
+			    "BG_%d : EQ_Count : %d CQ_Count : %d\n",
+			    phba->fw_config.eqid_count,
+			    phba->fw_config.cqid_count);
+	}
 
-		for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++)
-			if (pfw_cfg->ulp[ulp_num].ulp_mode &
-			    BEISCSI_ULP_ISCSI_INI_MODE)
-				set_bit(ulp_num,
-				&phba->fw_config.ulp_supported);
-
-		phba->fw_config.phys_port = pfw_cfg->phys_port;
-		for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) {
-			if (test_bit(ulp_num, &phba->fw_config.ulp_supported)) {
-
-				phba->fw_config.iscsi_cid_start[ulp_num] =
-					pfw_cfg->ulp[ulp_num].sq_base;
-				phba->fw_config.iscsi_cid_count[ulp_num] =
-					pfw_cfg->ulp[ulp_num].sq_count;
-
-				phba->fw_config.iscsi_icd_start[ulp_num] =
-					pfw_cfg->ulp[ulp_num].icd_base;
-				phba->fw_config.iscsi_icd_count[ulp_num] =
-					pfw_cfg->ulp[ulp_num].icd_count;
-
-				phba->fw_config.iscsi_chain_start[ulp_num] =
-					pfw_cfg->chain_icd[ulp_num].chain_base;
-				phba->fw_config.iscsi_chain_count[ulp_num] =
-					pfw_cfg->chain_icd[ulp_num].chain_count;
-
-				beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-					    "BG_%d : Function loaded on ULP : %d\n"
-					    "\tiscsi_cid_count : %d\n"
-					    "\tiscsi_cid_start : %d\n"
-					    "\t iscsi_icd_count : %d\n"
-					    "\t iscsi_icd_start : %d\n",
-					    ulp_num,
-					    phba->fw_config.
-					    iscsi_cid_count[ulp_num],
-					    phba->fw_config.
-					    iscsi_cid_start[ulp_num],
-					    phba->fw_config.
-					    iscsi_icd_count[ulp_num],
-					    phba->fw_config.
-					    iscsi_icd_start[ulp_num]);
-			}
+	/**
+	 * Check on which all ULP iSCSI Protocol is loaded.
+	 * Set the Bit for those ULP. This set flag is used
+	 * at all places in the code to check on which ULP
+	 * iSCSi Protocol is loaded
+	 **/
+	for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) {
+		if (pfw_cfg->ulp[ulp_num].ulp_mode &
+		    BEISCSI_ULP_ISCSI_INI_MODE) {
+			set_bit(ulp_num, &phba->fw_config.ulp_supported);
+
+			/* Get the CID, ICD and Chain count for each ULP */
+			phba->fw_config.iscsi_cid_start[ulp_num] =
+				pfw_cfg->ulp[ulp_num].sq_base;
+			phba->fw_config.iscsi_cid_count[ulp_num] =
+				pfw_cfg->ulp[ulp_num].sq_count;
+
+			phba->fw_config.iscsi_icd_start[ulp_num] =
+				pfw_cfg->ulp[ulp_num].icd_base;
+			phba->fw_config.iscsi_icd_count[ulp_num] =
+				pfw_cfg->ulp[ulp_num].icd_count;
+
+			phba->fw_config.iscsi_chain_start[ulp_num] =
+				pfw_cfg->chain_icd[ulp_num].chain_base;
+			phba->fw_config.iscsi_chain_count[ulp_num] =
+				pfw_cfg->chain_icd[ulp_num].chain_count;
+
+			beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
+				    "BG_%d : Function loaded on ULP : %d\n"
+				    "\tiscsi_cid_count : %d\n"
+				    "\tiscsi_cid_start : %d\n"
+				    "\t iscsi_icd_count : %d\n"
+				    "\t iscsi_icd_start : %d\n",
+				    ulp_num,
+				    phba->fw_config.
+				    iscsi_cid_count[ulp_num],
+				    phba->fw_config.
+				    iscsi_cid_start[ulp_num],
+				    phba->fw_config.
+				    iscsi_icd_count[ulp_num],
+				    phba->fw_config.
+				    iscsi_icd_start[ulp_num]);
 		}
+	}
 
-		phba->fw_config.dual_ulp_aware = (pfw_cfg->function_mode &
-						  BEISCSI_FUNC_DUA_MODE);
+	if (phba->fw_config.ulp_supported == 0) {
+		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+			    "BG_%d : iSCSI initiator mode not set: ULP0 %x ULP1 %x\n",
+			    pfw_cfg->ulp[BEISCSI_ULP0].ulp_mode,
+			    pfw_cfg->ulp[BEISCSI_ULP1].ulp_mode);
+		goto fail_init;
+	}
 
-		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-			    "BG_%d : DUA Mode : 0x%x\n",
-			    phba->fw_config.dual_ulp_aware);
+	/**
+	 * ICD is shared among ULPs. Use icd_count of any one loaded ULP
+	 **/
+	for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++)
+		if (test_bit(ulp_num, &phba->fw_config.ulp_supported))
+			break;
+	icd_count = phba->fw_config.iscsi_icd_count[ulp_num];
+	if (icd_count == 0 || icd_count > 65536) {
+		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+			    "BG_%d: invalid ICD count %d\n", icd_count);
+		goto fail_init;
+	}
 
-	} else {
+	cid_count = BEISCSI_GET_CID_COUNT(phba, BEISCSI_ULP0) +
+		    BEISCSI_GET_CID_COUNT(phba, BEISCSI_ULP1);
+	if (cid_count == 0 || cid_count > 4096) {
 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BG_%d : Failed in mgmt_get_fw_config\n");
-		status = -EINVAL;
+			    "BG_%d: invalid CID count %d\n", cid_count);
+		goto fail_init;
 	}
 
+	/**
+	 * Check FW is dual ULP aware i.e. can handle either
+	 * of the protocols.
+	 */
+	phba->fw_config.dual_ulp_aware = (pfw_cfg->function_mode &
+					  BEISCSI_FUNC_DUA_MODE);
+
+	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
+		    "BG_%d : DUA Mode : 0x%x\n",
+		    phba->fw_config.dual_ulp_aware);
+
+	/* all set, continue using this FW config */
+	status = 0;
+fail_init:
 	mutex_unlock(&ctrl->mbox_lock);
 	return status;
 }