diff options
| author |   Joe Eykholt <jeykholt@cisco.com> | 2009-11-03 11:49:22 -0800 |
|---|---|---|
| committer |   James Bottomley <James.Bottomley@suse.de> | 2009-12-04 12:01:19 -0600 |
| commit | 78112e5558064cb4d2e355aed87b2036fcdfe3dd (patch) | |
| tree | df34a54d3dcfb503621e3cdd64b22dc173a6722e /drivers/scsi/fnic/vnic_scsi.h | |
| parent | [SCSI] libfcoe: fcoe: simplify receive FLOGI response (diff) | |
| download | linux-dev-78112e5558064cb4d2e355aed87b2036fcdfe3dd.tar.xz linux-dev-78112e5558064cb4d2e355aed87b2036fcdfe3dd.zip | |
[SCSI] fnic: Add FIP support to the fnic driver
Use libfcoe as a common FIP implementation with fcoe.
FIP or non-FIP mode is fully automatic if the firmware
supports and enables it.
Even if FIP is not supported, this uses libfcoe for the non-FIP
handling of FLOGI and its response.
Use the new lport_set_port_id() notification to capture
successful FLOGI responses and port_id resets.
While transitioning between Ethernet and FC mode, all rx and
tx FC frames are queued. In Ethernet mode, all frames are
passed to the exchange manager to capture FLOGI responses.
Change to set data_src_addr to the ctl_src_addr whenever it
would have previously been zero because we're not logged in.
This seems safer so we'll never send a frame with a 0 source MAC.
This also eliminates a special case for sending FLOGI frames.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Diffstat (limited to 'drivers/scsi/fnic/vnic_scsi.h')
| -rw-r--r-- | drivers/scsi/fnic/vnic_scsi.h | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/scsi/fnic/vnic_scsi.h b/drivers/scsi/fnic/vnic_scsi.h index 46baa5254001..fbb55364e272 100644 --- a/drivers/scsi/fnic/vnic_scsi.h +++ b/drivers/scsi/fnic/vnic_scsi.h @@ -95,5 +95,6 @@ struct vnic_fc_config { #define VFCF_FCP_SEQ_LVL_ERR 0x1 /* Enable FCP-2 Error Recovery */ #define VFCF_PERBI 0x2 /* persistent binding info available */ +#define VFCF_FIP_CAPABLE 0x4 /* firmware can handle FIP */ #endif /* _VNIC_SCSI_H_ */ |