hpsa: generalize external arrays

External array LUNs must use target and lun numbers assigned by the
external array. So the driver must treat these differently from
local LUNs when assigning lun/target.

LUN's 'model' field has been used to detect Lun types that need
special treatment, but the desire is to eliminate the need to reference
specific array models, and support any external array.

Pass-through RAID (PTRAID) luns are not luns of the local controller,
so they are not reported in LUN count of command 'ID controller'.
However, they ARE reported in "Report logical Luns" command.
Local luns are listed first, then PTRAID LUNs.

The number of luns from "Report LUNs" in excess of those reported by
'ID controller' are therefore the PTRAID LUNS.

We can now remove function is_ext_target, and the 'white list'
array of supported model names.

Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Justin Lindley <justin.lindley@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 113 insertions, 26 deletions

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 0af4c670c7cd..1a67d63d5585 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -275,7 +275,6 @@ static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
 static void hpsa_command_resubmit_worker(struct work_struct *work);
 static u32 lockup_detected(struct ctlr_info *h);
 static int detect_controller_lockup(struct ctlr_info *h);
-static int is_ext_target(struct ctlr_info *h, struct hpsa_scsi_dev_t *device);
 
 static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
 {
@@ -776,7 +775,7 @@ static ssize_t path_info_show(struct device *dev,
 				hdev->bus, hdev->target, hdev->lun,
 				scsi_device_type(hdev->devtype));
 
-		if (is_ext_target(h, hdev) ||
+		if (hdev->external ||
 			hdev->devtype == TYPE_RAID ||
 			is_logical_device(hdev)) {
 			output_len += snprintf(path[i] + output_len,
@@ -3034,6 +3033,35 @@ out:
 	return rc;
 }
 
+static int hpsa_bmic_id_controller(struct ctlr_info *h,
+	struct bmic_identify_controller *buf, size_t bufsize)
+{
+	int rc = IO_OK;
+	struct CommandList *c;
+	struct ErrorInfo *ei;
+
+	c = cmd_alloc(h);
+
+	rc = fill_cmd(c, BMIC_IDENTIFY_CONTROLLER, h, buf, bufsize,
+		0, RAID_CTLR_LUNID, TYPE_CMD);
+	if (rc)
+		goto out;
+
+	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+		PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+	if (rc)
+		goto out;
+	ei = c->err_info;
+	if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+		hpsa_scsi_interpret_error(h, c);
+		rc = -1;
+	}
+out:
+	cmd_free(h, c);
+	return rc;
+}
+
+
 static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
 		unsigned char scsi3addr[], u16 bmic_device_index,
 		struct bmic_identify_physical_device *buf, size_t bufsize)
@@ -3510,27 +3538,6 @@ static void hpsa_update_device_supports_aborts(struct ctlr_info *h,
 	}
 }
 
-static unsigned char *ext_target_model[] = {
-	"MSA2012",
-	"MSA2024",
-	"MSA2312",
-	"MSA2324",
-	"P2000 G3 SAS",
-	"MSA 2040 SAS",
-	NULL,
-};
-
-static int is_ext_target(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
-{
-	int i;
-
-	for (i = 0; ext_target_model[i]; i++)
-		if (strncmp(device->model, ext_target_model[i],
-			strlen(ext_target_model[i])) == 0)
-			return 1;
-	return 0;
-}
-
 /*
  * Helper function to assign bus, target, lun mapping of devices.
  * Logical drive target and lun are assigned at this time, but
@@ -3554,7 +3561,7 @@ static void figure_bus_target_lun(struct ctlr_info *h,
 		return;
 	}
 	/* It's a logical device */
-	if (is_ext_target(h, device)) {
+	if (device->external) {
 		hpsa_set_bus_target_lun(device,
 			HPSA_EXTERNAL_RAID_VOLUME_BUS, (lunid >> 16) & 0x3fff,
 			lunid & 0x00ff);
@@ -3588,7 +3595,7 @@ static int add_ext_target_dev(struct ctlr_info *h,
 	if (!is_logical_dev_addr_mode(lunaddrbytes))
 		return 0; /* It's the logical targets that may lack lun 0. */
 
-	if (!is_ext_target(h, tmpdevice))
+	if (!tmpdevice->external)
 		return 0; /* Only external target devices have this problem. */
 
 	if (tmpdevice->lun == 0) /* if lun is 0, then we have a lun 0. */
@@ -3647,6 +3654,27 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
 	return 0;
 }
 
+static int  figure_external_status(struct ctlr_info *h, int raid_ctlr_position,
+	int i, int nphysicals, int nlocal_logicals)
+{
+	/* In report logicals, local logicals are listed first,
+	* then any externals.
+	*/
+	int logicals_start = nphysicals + (raid_ctlr_position == 0);
+
+	if (i == raid_ctlr_position)
+		return 0;
+
+	if (i < logicals_start)
+		return 0;
+
+	/* i is in logicals range, but still within local logicals */
+	if ((i - nphysicals - (raid_ctlr_position == 0)) < nlocal_logicals)
+		return 0;
+
+	return 1; /* it's an external lun */
+}
+
 /*
  * Do CISS_REPORT_PHYS and CISS_REPORT_LOG.  Data is returned in physdev,
  * logdev.  The number of luns in physdev and logdev are returned in
@@ -3770,6 +3798,32 @@ static void hpsa_get_path_info(struct hpsa_scsi_dev_t *this_device,
 		sizeof(this_device->bay));
 }
 
+/* get number of local logical disks. */
+static int hpsa_set_local_logical_count(struct ctlr_info *h,
+	struct bmic_identify_controller *id_ctlr,
+	u32 *nlocals)
+{
+	int rc;
+
+	if (!id_ctlr) {
+		dev_warn(&h->pdev->dev, "%s: id_ctlr buffer is NULL.\n",
+			__func__);
+		return -ENOMEM;
+	}
+	memset(id_ctlr, 0, sizeof(*id_ctlr));
+	rc = hpsa_bmic_id_controller(h, id_ctlr, sizeof(*id_ctlr));
+	if (!rc)
+		if (id_ctlr->configured_logical_drive_count < 256)
+			*nlocals = id_ctlr->configured_logical_drive_count;
+		else
+			*nlocals = le16_to_cpu(
+					id_ctlr->extended_logical_unit_count);
+	else
+		*nlocals = -1;
+	return rc;
+}
+
+
 static void hpsa_update_scsi_devices(struct ctlr_info *h)
 {
 	/* the idea here is we could get notified
@@ -3785,8 +3839,10 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 	struct ReportExtendedLUNdata *physdev_list = NULL;
 	struct ReportLUNdata *logdev_list = NULL;
 	struct bmic_identify_physical_device *id_phys = NULL;
+	struct bmic_identify_controller *id_ctlr = NULL;
 	u32 nphysicals = 0;
 	u32 nlogicals = 0;
+	u32 nlocal_logicals = 0;
 	u32 ndev_allocated = 0;
 	struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
 	int ncurrent = 0;
@@ -3800,9 +3856,10 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 	logdev_list = kzalloc(sizeof(*logdev_list), GFP_KERNEL);
 	tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
 	id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL);
+	id_ctlr = kzalloc(sizeof(*id_ctlr), GFP_KERNEL);
 
 	if (!currentsd || !physdev_list || !logdev_list ||
-		!tmpdevice || !id_phys) {
+		!tmpdevice || !id_phys || !id_ctlr) {
 		dev_err(&h->pdev->dev, "out of memory\n");
 		goto out;
 	}
@@ -3816,6 +3873,13 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 		goto out;
 	}
 
+	/* Set number of local logicals (non PTRAID) */
+	if (hpsa_set_local_logical_count(h, id_ctlr, &nlocal_logicals)) {
+		dev_warn(&h->pdev->dev,
+			"%s: Can't determine number of local logical devices.\n",
+			__func__);
+	}
+
 	/* We might see up to the maximum number of logical and physical disks
 	 * plus external target devices, and a device for the local RAID
 	 * controller.
@@ -3879,6 +3943,11 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 			continue;
 		}
 
+		/* Determine if this is a lun from an external target array */
+		tmpdevice->external =
+			figure_external_status(h, raid_ctlr_position, i,
+						nphysicals, nlocal_logicals);
+
 		figure_bus_target_lun(h, lunaddrbytes, tmpdevice);
 		hpsa_update_device_supports_aborts(h, tmpdevice, lunaddrbytes);
 		this_device = currentsd[ncurrent];
@@ -3962,6 +4031,7 @@ out:
 	kfree(currentsd);
 	kfree(physdev_list);
 	kfree(logdev_list);
+	kfree(id_ctlr);
 	kfree(id_phys);
 }
 
@@ -6414,6 +6484,23 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 			c->Request.CDB[7] = (size >> 16) & 0xFF;
 			c->Request.CDB[8] = (size >> 8) & 0XFF;
 			break;
+		case BMIC_IDENTIFY_CONTROLLER:
+			c->Request.CDBLen = 10;
+			c->Request.type_attr_dir =
+				TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+			c->Request.Timeout = 0;
+			c->Request.CDB[0] = BMIC_READ;
+			c->Request.CDB[1] = 0;
+			c->Request.CDB[2] = 0;
+			c->Request.CDB[3] = 0;
+			c->Request.CDB[4] = 0;
+			c->Request.CDB[5] = 0;
+			c->Request.CDB[6] = BMIC_IDENTIFY_CONTROLLER;
+			c->Request.CDB[7] = (size >> 16) & 0xFF;
+			c->Request.CDB[8] = (size >> 8) & 0XFF;
+			c->Request.CDB[9] = 0;
+			break;
+
 		default:
 			dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
 			BUG();