diff options
| author |   Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com> | 2013-09-03 15:09:42 +0530 |
|---|---|---|
| committer |   James Bottomley <JBottomley@Parallels.com> | 2013-10-25 09:58:13 +0100 |
| commit | a9a923e55ede94ddbf5b870b0f057da8b7cee1b9 (patch) | |
| tree | e28a63a9868404cfd830a7d6448c00dc27740b69 /drivers/scsi/pm8001/pm80xx_hwi.c | |
| parent | [SCSI] iscsi_tcp: consider session state in iscsi_sw_sk_state_check (diff) | |
| download | linux-dev-a9a923e55ede94ddbf5b870b0f057da8b7cee1b9.tar.xz linux-dev-a9a923e55ede94ddbf5b870b0f057da8b7cee1b9.zip | |
[SCSI] pm80xx: Device id changes to support series 8 controllers.
Updated pci id table with device, vendor, subdevice and subvendor ids
for 8074, 8076, 8077 SAS/SATA 12G controllers. Added 12G related macros.
Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/pm8001/pm80xx_hwi.c')
| -rw-r--r-- | drivers/scsi/pm8001/pm80xx_hwi.c | 25 |
1 files changed, 20 insertions, 5 deletions
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 9f91030211e8..6f836d18f269 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -430,7 +430,11 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha) table is updated */ pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_UPDATE); /* wait until Inbound DoorBell Clear Register toggled */ - max_wait_count = 2 * 1000 * 1000;/* 2 sec for spcv/ve */ + if (IS_SPCV_12G(pm8001_ha->pdev)) { + max_wait_count = 4 * 1000 * 1000;/* 4 sec */ + } else { + max_wait_count = 2 * 1000 * 1000;/* 2 sec */ + } do { udelay(1); value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET); @@ -913,7 +917,11 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha) pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_RESET); /* wait until Inbound DoorBell Clear Register toggled */ - max_wait_count = 2 * 1000 * 1000; /* 2 sec for spcv/ve */ + if (IS_SPCV_12G(pm8001_ha->pdev)) { + max_wait_count = 4 * 1000 * 1000;/* 4 sec */ + } else { + max_wait_count = 2 * 1000 * 1000;/* 2 sec */ + } do { udelay(1); value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET); @@ -3941,9 +3949,16 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) ** [14] 0b disable spin up hold; 1b enable spin up hold ** [15] ob no change in current PHY analig setup 1b enable using SPAST */ - payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | - LINKMODE_AUTO | LINKRATE_15 | - LINKRATE_30 | LINKRATE_60 | phy_id); + if (!IS_SPCV_12G(pm8001_ha->pdev)) + payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | + LINKMODE_AUTO | LINKRATE_15 | + LINKRATE_30 | LINKRATE_60 | phy_id); + else + payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | + LINKMODE_AUTO | LINKRATE_15 | + LINKRATE_30 | LINKRATE_60 | LINKRATE_120 | + phy_id); + /* SSC Disable and SAS Analog ST configuration */ /** payload.ase_sh_lm_slr_phyid = |