qedf: Add support for populating ethernet TLVs.

This patch adds callbacks for providing the ethernet protocol driver TLVs.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 87 insertions, 0 deletions

diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 6c19015975a8..730e480df256 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -566,6 +566,7 @@ static struct qed_fcoe_cb_ops qedf_cb_ops = {
 	{
 		.link_update = qedf_link_update,
 		.dcbx_aen = qedf_dcbx_handler,
+		.get_protocol_tlv_data = qedf_get_protocol_tlv_data,
 	}
 };
 
@@ -1746,6 +1747,8 @@ static struct fc_host_statistics *qedf_fc_get_host_stats(struct Scsi_Host
 		goto out;
 	}
 
+	mutex_lock(&qedf->stats_mutex);
+
 	/* Query firmware for offload stats */
 	qed_ops->get_stats(qedf->cdev, fw_fcoe_stats);
 
@@ -1779,6 +1782,7 @@ static struct fc_host_statistics *qedf_fc_get_host_stats(struct Scsi_Host
 	qedf_stats->fcp_packet_aborts += qedf->packet_aborts;
 	qedf_stats->fcp_frame_alloc_failures += qedf->alloc_failures;
 
+	mutex_unlock(&qedf->stats_mutex);
 	kfree(fw_fcoe_stats);
 out:
 	return qedf_stats;
@@ -2948,6 +2952,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 		qedf->stop_io_on_error = false;
 		pci_set_drvdata(pdev, qedf);
 		init_completion(&qedf->fipvlan_compl);
+		mutex_init(&qedf->stats_mutex);
 
 		QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_INFO,
 		   "QLogic FastLinQ FCoE Module qedf %s, "
@@ -3393,6 +3398,88 @@ static void qedf_remove(struct pci_dev *pdev)
 }
 
 /*
+ * Protocol TLV handler
+ */
+void qedf_get_protocol_tlv_data(void *dev, void *data)
+{
+	struct qedf_ctx *qedf = dev;
+	struct qed_mfw_tlv_fcoe *fcoe = data;
+	struct fc_lport *lport = qedf->lport;
+	struct Scsi_Host *host = lport->host;
+	struct fc_host_attrs *fc_host = shost_to_fc_host(host);
+	struct fc_host_statistics *hst;
+
+	/* Force a refresh of the fc_host stats including offload stats */
+	hst = qedf_fc_get_host_stats(host);
+
+	fcoe->qos_pri_set = true;
+	fcoe->qos_pri = 3; /* Hard coded to 3 in driver */
+
+	fcoe->ra_tov_set = true;
+	fcoe->ra_tov = lport->r_a_tov;
+
+	fcoe->ed_tov_set = true;
+	fcoe->ed_tov = lport->e_d_tov;
+
+	fcoe->npiv_state_set = true;
+	fcoe->npiv_state = 1; /* NPIV always enabled */
+
+	fcoe->num_npiv_ids_set = true;
+	fcoe->num_npiv_ids = fc_host->npiv_vports_inuse;
+
+	/* Certain attributes we only want to set if we've selected an FCF */
+	if (qedf->ctlr.sel_fcf) {
+		fcoe->switch_name_set = true;
+		u64_to_wwn(qedf->ctlr.sel_fcf->switch_name, fcoe->switch_name);
+	}
+
+	fcoe->port_state_set = true;
+	/* For qedf we're either link down or fabric attach */
+	if (lport->link_up)
+		fcoe->port_state = QED_MFW_TLV_PORT_STATE_FABRIC;
+	else
+		fcoe->port_state = QED_MFW_TLV_PORT_STATE_OFFLINE;
+
+	fcoe->link_failures_set = true;
+	fcoe->link_failures = (u16)hst->link_failure_count;
+
+	fcoe->fcoe_txq_depth_set = true;
+	fcoe->fcoe_rxq_depth_set = true;
+	fcoe->fcoe_rxq_depth = FCOE_PARAMS_NUM_TASKS;
+	fcoe->fcoe_txq_depth = FCOE_PARAMS_NUM_TASKS;
+
+	fcoe->fcoe_rx_frames_set = true;
+	fcoe->fcoe_rx_frames = hst->rx_frames;
+
+	fcoe->fcoe_tx_frames_set = true;
+	fcoe->fcoe_tx_frames = hst->tx_frames;
+
+	fcoe->fcoe_rx_bytes_set = true;
+	fcoe->fcoe_rx_bytes = hst->fcp_input_megabytes * 1000000;
+
+	fcoe->fcoe_tx_bytes_set = true;
+	fcoe->fcoe_tx_bytes = hst->fcp_output_megabytes * 1000000;
+
+	fcoe->crc_count_set = true;
+	fcoe->crc_count = hst->invalid_crc_count;
+
+	fcoe->tx_abts_set = true;
+	fcoe->tx_abts = hst->fcp_packet_aborts;
+
+	fcoe->tx_lun_rst_set = true;
+	fcoe->tx_lun_rst = qedf->lun_resets;
+
+	fcoe->abort_task_sets_set = true;
+	fcoe->abort_task_sets = qedf->packet_aborts;
+
+	fcoe->scsi_busy_set = true;
+	fcoe->scsi_busy = qedf->busy;
+
+	fcoe->scsi_tsk_full_set = true;
+	fcoe->scsi_tsk_full = qedf->task_set_fulls;
+}
+
+/*
  * Module Init/Remove
  */