Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1171 insertions, 0 deletions

diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
new file mode 100644
index 000000000000..dfc987301f17
--- /dev/null
+++ b/drivers/serial/serial_txx9.c
@@ -0,0 +1,1171 @@
+/*
+ *  drivers/serial/serial_txx9.c
+ *
+ * Derived from many drivers using generic_serial interface,
+ * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c
+ * (was in Linux/VR tree) by Jim Pick.
+ *
+ *  Copyright (C) 1999 Harald Koerfgen
+ *  Copyright (C) 2000 Jim Pick <jim@jimpick.com>
+ *  Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com)
+ *  Copyright (C) 2000-2002 Toshiba Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller
+ *
+ *  Revision History:
+ *	0.30	Initial revision. (Renamed from serial_txx927.c)
+ *	0.31	Use save_flags instead of local_irq_save.
+ *	0.32	Support SCLK.
+ *	0.33	Switch TXX9_TTY_NAME by CONFIG_SERIAL_TXX9_STDSERIAL.
+ *		Support TIOCSERGETLSR.
+ *	0.34	Support slow baudrate.
+ *	0.40	Merge codes from mainstream kernel (2.4.22).
+ *	0.41	Fix console checking in rs_shutdown_port().
+ *		Disable flow-control in serial_console_write().
+ *	0.42	Fix minor compiler warning.
+ *	1.00	Kernel 2.6.  Converted to new serial core (based on 8250.c).
+ *	1.01	Set fifosize to make tx_empry called properly.
+ *		Use standard uart_get_divisor.
+ *	1.02	Cleanup. (import 8250.c changes)
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+static char *serial_version = "1.02";
+static char *serial_name = "TX39/49 Serial driver";
+
+#define PASS_LIMIT	256
+
+#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL)
+/* "ttyS" is used for standard serial driver */
+#define TXX9_TTY_NAME "ttyTX"
+#define TXX9_TTY_DEVFS_NAME "tttx/"
+#define TXX9_TTY_MINOR_START	(64 + 64)	/* ttyTX0(128), ttyTX1(129) */
+#else
+/* acts like standard serial driver */
+#define TXX9_TTY_NAME "ttyS"
+#define TXX9_TTY_DEVFS_NAME "tts/"
+#define TXX9_TTY_MINOR_START	64
+#endif
+#define TXX9_TTY_MAJOR	TTY_MAJOR
+
+/* flag aliases */
+#define UPF_TXX9_HAVE_CTS_LINE	UPF_BUGGY_UART
+#define UPF_TXX9_USE_SCLK	UPF_MAGIC_MULTIPLIER
+
+#ifdef CONFIG_PCI
+/* support for Toshiba TC86C001 SIO */
+#define ENABLE_SERIAL_TXX9_PCI
+#endif
+
+/*
+ * Number of serial ports
+ */
+#ifdef ENABLE_SERIAL_TXX9_PCI
+#define NR_PCI_BOARDS	4
+#define UART_NR  (2 + NR_PCI_BOARDS)
+#else
+#define UART_NR  2
+#endif
+
+struct uart_txx9_port {
+	struct uart_port	port;
+
+	/*
+	 * We provide a per-port pm hook.
+	 */
+	void			(*pm)(struct uart_port *port,
+				      unsigned int state, unsigned int old);
+};
+
+#define TXX9_REGION_SIZE	0x24
+
+/* TXX9 Serial Registers */
+#define TXX9_SILCR	0x00
+#define TXX9_SIDICR	0x04
+#define TXX9_SIDISR	0x08
+#define TXX9_SICISR	0x0c
+#define TXX9_SIFCR	0x10
+#define TXX9_SIFLCR	0x14
+#define TXX9_SIBGR	0x18
+#define TXX9_SITFIFO	0x1c
+#define TXX9_SIRFIFO	0x20
+
+/* SILCR : Line Control */
+#define TXX9_SILCR_SCS_MASK	0x00000060
+#define TXX9_SILCR_SCS_IMCLK	0x00000000
+#define TXX9_SILCR_SCS_IMCLK_BG	0x00000020
+#define TXX9_SILCR_SCS_SCLK	0x00000040
+#define TXX9_SILCR_SCS_SCLK_BG	0x00000060
+#define TXX9_SILCR_UEPS	0x00000010
+#define TXX9_SILCR_UPEN	0x00000008
+#define TXX9_SILCR_USBL_MASK	0x00000004
+#define TXX9_SILCR_USBL_1BIT	0x00000000
+#define TXX9_SILCR_USBL_2BIT	0x00000004
+#define TXX9_SILCR_UMODE_MASK	0x00000003
+#define TXX9_SILCR_UMODE_8BIT	0x00000000
+#define TXX9_SILCR_UMODE_7BIT	0x00000001
+
+/* SIDICR : DMA/Int. Control */
+#define TXX9_SIDICR_TDE	0x00008000
+#define TXX9_SIDICR_RDE	0x00004000
+#define TXX9_SIDICR_TIE	0x00002000
+#define TXX9_SIDICR_RIE	0x00001000
+#define TXX9_SIDICR_SPIE	0x00000800
+#define TXX9_SIDICR_CTSAC	0x00000600
+#define TXX9_SIDICR_STIE_MASK	0x0000003f
+#define TXX9_SIDICR_STIE_OERS		0x00000020
+#define TXX9_SIDICR_STIE_CTSS		0x00000010
+#define TXX9_SIDICR_STIE_RBRKD	0x00000008
+#define TXX9_SIDICR_STIE_TRDY		0x00000004
+#define TXX9_SIDICR_STIE_TXALS	0x00000002
+#define TXX9_SIDICR_STIE_UBRKD	0x00000001
+
+/* SIDISR : DMA/Int. Status */
+#define TXX9_SIDISR_UBRK	0x00008000
+#define TXX9_SIDISR_UVALID	0x00004000
+#define TXX9_SIDISR_UFER	0x00002000
+#define TXX9_SIDISR_UPER	0x00001000
+#define TXX9_SIDISR_UOER	0x00000800
+#define TXX9_SIDISR_ERI	0x00000400
+#define TXX9_SIDISR_TOUT	0x00000200
+#define TXX9_SIDISR_TDIS	0x00000100
+#define TXX9_SIDISR_RDIS	0x00000080
+#define TXX9_SIDISR_STIS	0x00000040
+#define TXX9_SIDISR_RFDN_MASK	0x0000001f
+
+/* SICISR : Change Int. Status */
+#define TXX9_SICISR_OERS	0x00000020
+#define TXX9_SICISR_CTSS	0x00000010
+#define TXX9_SICISR_RBRKD	0x00000008
+#define TXX9_SICISR_TRDY	0x00000004
+#define TXX9_SICISR_TXALS	0x00000002
+#define TXX9_SICISR_UBRKD	0x00000001
+
+/* SIFCR : FIFO Control */
+#define TXX9_SIFCR_SWRST	0x00008000
+#define TXX9_SIFCR_RDIL_MASK	0x00000180
+#define TXX9_SIFCR_RDIL_1	0x00000000
+#define TXX9_SIFCR_RDIL_4	0x00000080
+#define TXX9_SIFCR_RDIL_8	0x00000100
+#define TXX9_SIFCR_RDIL_12	0x00000180
+#define TXX9_SIFCR_RDIL_MAX	0x00000180
+#define TXX9_SIFCR_TDIL_MASK	0x00000018
+#define TXX9_SIFCR_TDIL_MASK	0x00000018
+#define TXX9_SIFCR_TDIL_1	0x00000000
+#define TXX9_SIFCR_TDIL_4	0x00000001
+#define TXX9_SIFCR_TDIL_8	0x00000010
+#define TXX9_SIFCR_TDIL_MAX	0x00000010
+#define TXX9_SIFCR_TFRST	0x00000004
+#define TXX9_SIFCR_RFRST	0x00000002
+#define TXX9_SIFCR_FRSTE	0x00000001
+#define TXX9_SIO_TX_FIFO	8
+#define TXX9_SIO_RX_FIFO	16
+
+/* SIFLCR : Flow Control */
+#define TXX9_SIFLCR_RCS	0x00001000
+#define TXX9_SIFLCR_TES	0x00000800
+#define TXX9_SIFLCR_RTSSC	0x00000200
+#define TXX9_SIFLCR_RSDE	0x00000100
+#define TXX9_SIFLCR_TSDE	0x00000080
+#define TXX9_SIFLCR_RTSTL_MASK	0x0000001e
+#define TXX9_SIFLCR_RTSTL_MAX	0x0000001e
+#define TXX9_SIFLCR_TBRK	0x00000001
+
+/* SIBGR : Baudrate Control */
+#define TXX9_SIBGR_BCLK_MASK	0x00000300
+#define TXX9_SIBGR_BCLK_T0	0x00000000
+#define TXX9_SIBGR_BCLK_T2	0x00000100
+#define TXX9_SIBGR_BCLK_T4	0x00000200
+#define TXX9_SIBGR_BCLK_T6	0x00000300
+#define TXX9_SIBGR_BRD_MASK	0x000000ff
+
+static inline unsigned int sio_in(struct uart_txx9_port *up, int offset)
+{
+	switch (up->port.iotype) {
+	default:
+		return *(volatile u32 *)(up->port.membase + offset);
+	case UPIO_PORT:
+		return inl(up->port.iobase + offset);
+	}
+}
+
+static inline void
+sio_out(struct uart_txx9_port *up, int offset, int value)
+{
+	switch (up->port.iotype) {
+	default:
+		*(volatile u32 *)(up->port.membase + offset) = value;
+		break;
+	case UPIO_PORT:
+		outl(value, up->port.iobase + offset);
+		break;
+	}
+}
+
+static inline void
+sio_mask(struct uart_txx9_port *up, int offset, unsigned int value)
+{
+	sio_out(up, offset, sio_in(up, offset) & ~value);
+}
+static inline void
+sio_set(struct uart_txx9_port *up, int offset, unsigned int value)
+{
+	sio_out(up, offset, sio_in(up, offset) | value);
+}
+
+static inline void
+sio_quot_set(struct uart_txx9_port *up, int quot)
+{
+	quot >>= 1;
+	if (quot < 256)
+		sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0);
+	else if (quot < (256 << 2))
+		sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2);
+	else if (quot < (256 << 4))
+		sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4);
+	else if (quot < (256 << 6))
+		sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6);
+	else
+		sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6);
+}
+
+static void serial_txx9_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void serial_txx9_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void serial_txx9_stop_rx(struct uart_port *port)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	up->port.read_status_mask &= ~TXX9_SIDISR_RDIS;
+#if 0
+	sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_RIE);
+#endif
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void serial_txx9_enable_ms(struct uart_port *port)
+{
+	/* TXX9-SIO can not control DTR... */
+}
+
+static inline void
+receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *regs)
+{
+	struct tty_struct *tty = up->port.info->tty;
+	unsigned char ch;
+	unsigned int disr = *status;
+	int max_count = 256;
+	char flag;
+
+	do {
+		/* The following is not allowed by the tty layer and
+		   unsafe. It should be fixed ASAP */
+		if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+			if(tty->low_latency)
+				tty_flip_buffer_push(tty);
+			/* If this failed then we will throw away the
+			   bytes but must do so to clear interrupts */
+		}
+		ch = sio_in(up, TXX9_SIRFIFO);
+		flag = TTY_NORMAL;
+		up->port.icount.rx++;
+
+		if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER |
+				     TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) {
+			/*
+			 * For statistics only
+			 */
+			if (disr & TXX9_SIDISR_UBRK) {
+				disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER);
+				up->port.icount.brk++;
+				/*
+				 * We do the SysRQ and SAK checking
+				 * here because otherwise the break
+				 * may get masked by ignore_status_mask
+				 * or read_status_mask.
+				 */
+				if (uart_handle_break(&up->port))
+					goto ignore_char;
+			} else if (disr & TXX9_SIDISR_UPER)
+				up->port.icount.parity++;
+			else if (disr & TXX9_SIDISR_UFER)
+				up->port.icount.frame++;
+			if (disr & TXX9_SIDISR_UOER)
+				up->port.icount.overrun++;
+
+			/*
+			 * Mask off conditions which should be ingored.
+			 */
+			disr &= up->port.read_status_mask;
+
+			if (disr & TXX9_SIDISR_UBRK) {
+				flag = TTY_BREAK;
+			} else if (disr & TXX9_SIDISR_UPER)
+				flag = TTY_PARITY;
+			else if (disr & TXX9_SIDISR_UFER)
+				flag = TTY_FRAME;
+		}
+		if (uart_handle_sysrq_char(&up->port, ch, regs))
+			goto ignore_char;
+		if ((disr & up->port.ignore_status_mask) == 0) {
+			tty_insert_flip_char(tty, ch, flag);
+		}
+		if ((disr & TXX9_SIDISR_UOER) &&
+		    tty->flip.count < TTY_FLIPBUF_SIZE) {
+			/*
+			 * Overrun is special, since it's reported
+			 * immediately, and doesn't affect the current
+			 * character.
+			 */
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		}
+	ignore_char:
+		disr = sio_in(up, TXX9_SIDISR);
+	} while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0));
+	tty_flip_buffer_push(tty);
+	*status = disr;
+}
+
+static inline void transmit_chars(struct uart_txx9_port *up)
+{
+	struct circ_buf *xmit = &up->port.info->xmit;
+	int count;
+
+	if (up->port.x_char) {
+		sio_out(up, TXX9_SITFIFO, up->port.x_char);
+		up->port.icount.tx++;
+		up->port.x_char = 0;
+		return;
+	}
+	if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+		serial_txx9_stop_tx(&up->port, 0);
+		return;
+	}
+
+	count = TXX9_SIO_TX_FIFO;
+	do {
+		sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		up->port.icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&up->port);
+
+	if (uart_circ_empty(xmit))
+		serial_txx9_stop_tx(&up->port, 0);
+}
+
+static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	int pass_counter = 0;
+	struct uart_txx9_port *up = dev_id;
+	unsigned int status;
+
+	while (1) {
+		spin_lock(&up->port.lock);
+		status = sio_in(up, TXX9_SIDISR);
+		if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE))
+			status &= ~TXX9_SIDISR_TDIS;
+		if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS |
+				TXX9_SIDISR_TOUT))) {
+			spin_unlock(&up->port.lock);
+			break;
+		}
+
+		if (status & TXX9_SIDISR_RDIS)
+			receive_chars(up, &status, regs);
+		if (status & TXX9_SIDISR_TDIS)
+			transmit_chars(up);
+		/* Clear TX/RX Int. Status */
+		sio_mask(up, TXX9_SIDISR,
+			 TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS |
+			 TXX9_SIDISR_TOUT);
+		spin_unlock(&up->port.lock);
+
+		if (pass_counter++ > PASS_LIMIT)
+			break;
+	}
+
+	return pass_counter ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static unsigned int serial_txx9_tx_empty(struct uart_port *port)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	unsigned long flags;
+	unsigned int ret;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0;
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
+	return ret;
+}
+
+static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	unsigned long flags;
+	unsigned int ret;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	ret =  ((sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS)
+		| ((sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
+	return ret;
+}
+
+static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	if (mctrl & TIOCM_RTS)
+		sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
+	else
+		sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void serial_txx9_break_ctl(struct uart_port *port, int break_state)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	if (break_state == -1)
+		sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
+	else
+		sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int serial_txx9_startup(struct uart_port *port)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	unsigned long flags;
+	int retval;
+
+	/*
+	 * Clear the FIFO buffers and disable them.
+	 * (they will be reeanbled in set_termios())
+	 */
+	sio_set(up, TXX9_SIFCR,
+		TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
+	/* clear reset */
+	sio_mask(up, TXX9_SIFCR,
+		 TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
+	sio_out(up, TXX9_SIDICR, 0);
+
+	/*
+	 * Clear the interrupt registers.
+	 */
+	sio_out(up, TXX9_SIDISR, 0);
+
+	retval = request_irq(up->port.irq, serial_txx9_interrupt,
+			     SA_SHIRQ, "serial_txx9", up);
+	if (retval)
+		return retval;
+
+	/*
+	 * Now, initialize the UART
+	 */
+	spin_lock_irqsave(&up->port.lock, flags);
+	serial_txx9_set_mctrl(&up->port, up->port.mctrl);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
+	/* Enable RX/TX */
+	sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE);
+
+	/*
+	 * Finally, enable interrupts.
+	 */
+	sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE);
+
+	return 0;
+}
+
+static void serial_txx9_shutdown(struct uart_port *port)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	unsigned long flags;
+
+	/*
+	 * Disable interrupts from this port
+	 */
+	sio_out(up, TXX9_SIDICR, 0);	/* disable all intrs */
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	serial_txx9_set_mctrl(&up->port, up->port.mctrl);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
+	/*
+	 * Disable break condition
+	 */
+	sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
+
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+	if (up->port.cons && up->port.line == up->port.cons->index) {
+		free_irq(up->port.irq, up);
+		return;
+	}
+#endif
+	/* reset FIFOs */
+	sio_set(up, TXX9_SIFCR,
+		TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
+	/* clear reset */
+	sio_mask(up, TXX9_SIFCR,
+		 TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
+
+	/* Disable RX/TX */
+	sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE);
+
+	free_irq(up->port.irq, up);
+}
+
+static void
+serial_txx9_set_termios(struct uart_port *port, struct termios *termios,
+		       struct termios *old)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	unsigned int cval, fcr = 0;
+	unsigned long flags;
+	unsigned int baud, quot;
+
+	cval = sio_in(up, TXX9_SILCR);
+	/* byte size and parity */
+	cval &= ~TXX9_SILCR_UMODE_MASK;
+	switch (termios->c_cflag & CSIZE) {
+	case CS7:
+		cval |= TXX9_SILCR_UMODE_7BIT;
+		break;
+	default:
+	case CS5:	/* not supported */
+	case CS6:	/* not supported */
+	case CS8:
+		cval |= TXX9_SILCR_UMODE_8BIT;
+		break;
+	}
+
+	cval &= ~TXX9_SILCR_USBL_MASK;
+	if (termios->c_cflag & CSTOPB)
+		cval |= TXX9_SILCR_USBL_2BIT;
+	else
+		cval |= TXX9_SILCR_USBL_1BIT;
+	cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS);
+	if (termios->c_cflag & PARENB)
+		cval |= TXX9_SILCR_UPEN;
+	if (!(termios->c_cflag & PARODD))
+		cval |= TXX9_SILCR_UEPS;
+
+	/*
+	 * Ask the core to calculate the divisor for us.
+	 */
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2);
+	quot = uart_get_divisor(port, baud);
+
+	/* Set up FIFOs */
+	/* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
+	fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1;
+
+	/*
+	 * Ok, we're now changing the port state.  Do it with
+	 * interrupts disabled.
+	 */
+	spin_lock_irqsave(&up->port.lock, flags);
+
+	/*
+	 * Update the per-port timeout.
+	 */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	up->port.read_status_mask = TXX9_SIDISR_UOER |
+		TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS;
+	if (termios->c_iflag & INPCK)
+		up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		up->port.read_status_mask |= TXX9_SIDISR_UBRK;
+
+	/*
+	 * Characteres to ignore
+	 */
+	up->port.ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER;
+	if (termios->c_iflag & IGNBRK) {
+		up->port.ignore_status_mask |= TXX9_SIDISR_UBRK;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			up->port.ignore_status_mask |= TXX9_SIDISR_UOER;
+	}
+
+	/*
+	 * ignore all characters if CREAD is not set
+	 */
+	if ((termios->c_cflag & CREAD) == 0)
+		up->port.ignore_status_mask |= TXX9_SIDISR_RDIS;
+
+	/* CTS flow control flag */
+	if ((termios->c_cflag & CRTSCTS) &&
+	    (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) {
+		sio_set(up, TXX9_SIFLCR,
+			TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES);
+	} else {
+		sio_mask(up, TXX9_SIFLCR,
+			 TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES);
+	}
+
+	sio_out(up, TXX9_SILCR, cval);
+	sio_quot_set(up, quot);
+	sio_out(up, TXX9_SIFCR, fcr);
+
+	serial_txx9_set_mctrl(&up->port, up->port.mctrl);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+serial_txx9_pm(struct uart_port *port, unsigned int state,
+	      unsigned int oldstate)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	if (state) {
+		/* sleep */
+
+		if (up->pm)
+			up->pm(port, state, oldstate);
+	} else {
+		/* wake */
+
+		if (up->pm)
+			up->pm(port, state, oldstate);
+	}
+}
+
+static int serial_txx9_request_resource(struct uart_txx9_port *up)
+{
+	unsigned int size = TXX9_REGION_SIZE;
+	int ret = 0;
+
+	switch (up->port.iotype) {
+	default:
+		if (!up->port.mapbase)
+			break;
+
+		if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) {
+			ret = -EBUSY;
+			break;
+		}
+
+		if (up->port.flags & UPF_IOREMAP) {
+			up->port.membase = ioremap(up->port.mapbase, size);
+			if (!up->port.membase) {
+				release_mem_region(up->port.mapbase, size);
+				ret = -ENOMEM;
+			}
+		}
+		break;
+
+	case UPIO_PORT:
+		if (!request_region(up->port.iobase, size, "serial_txx9"))
+			ret = -EBUSY;
+		break;
+	}
+	return ret;
+}
+
+static void serial_txx9_release_resource(struct uart_txx9_port *up)
+{
+	unsigned int size = TXX9_REGION_SIZE;
+
+	switch (up->port.iotype) {
+	default:
+		if (!up->port.mapbase)
+			break;
+
+		if (up->port.flags & UPF_IOREMAP) {
+			iounmap(up->port.membase);
+			up->port.membase = NULL;
+		}
+
+		release_mem_region(up->port.mapbase, size);
+		break;
+
+	case UPIO_PORT:
+		release_region(up->port.iobase, size);
+		break;
+	}
+}
+
+static void serial_txx9_release_port(struct uart_port *port)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	serial_txx9_release_resource(up);
+}
+
+static int serial_txx9_request_port(struct uart_port *port)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	return serial_txx9_request_resource(up);
+}
+
+static void serial_txx9_config_port(struct uart_port *port, int uflags)
+{
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	unsigned long flags;
+	int ret;
+
+	/*
+	 * Find the region that we can probe for.  This in turn
+	 * tells us whether we can probe for the type of port.
+	 */
+	ret = serial_txx9_request_resource(up);
+	if (ret < 0)
+		return;
+	port->type = PORT_TXX9;
+	up->port.fifosize = TXX9_SIO_TX_FIFO;
+
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+	if (up->port.line == up->port.cons->index)
+		return;
+#endif
+	spin_lock_irqsave(&up->port.lock, flags);
+	/*
+	 * Reset the UART.
+	 */
+	sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
+#ifdef CONFIG_CPU_TX49XX
+	/* TX4925 BUG WORKAROUND.  Accessing SIOC register
+	 * immediately after soft reset causes bus error. */
+	iob();
+	udelay(1);
+#endif
+	while (sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST)
+		;
+	/* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
+	sio_set(up, TXX9_SIFCR,
+		TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1);
+	/* initial settings */
+	sio_out(up, TXX9_SILCR,
+		TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
+		((up->port.flags & UPF_TXX9_USE_SCLK) ?
+		 TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
+	sio_quot_set(up, uart_get_divisor(port, 9600));
+	sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int
+serial_txx9_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	if (ser->irq < 0 ||
+	    ser->baud_base < 9600 || ser->type != PORT_TXX9)
+		return -EINVAL;
+	return 0;
+}
+
+static const char *
+serial_txx9_type(struct uart_port *port)
+{
+	return "txx9";
+}
+
+static struct uart_ops serial_txx9_pops = {
+	.tx_empty	= serial_txx9_tx_empty,
+	.set_mctrl	= serial_txx9_set_mctrl,
+	.get_mctrl	= serial_txx9_get_mctrl,
+	.stop_tx	= serial_txx9_stop_tx,
+	.start_tx	= serial_txx9_start_tx,
+	.stop_rx	= serial_txx9_stop_rx,
+	.enable_ms	= serial_txx9_enable_ms,
+	.break_ctl	= serial_txx9_break_ctl,
+	.startup	= serial_txx9_startup,
+	.shutdown	= serial_txx9_shutdown,
+	.set_termios	= serial_txx9_set_termios,
+	.pm		= serial_txx9_pm,
+	.type		= serial_txx9_type,
+	.release_port	= serial_txx9_release_port,
+	.request_port	= serial_txx9_request_port,
+	.config_port	= serial_txx9_config_port,
+	.verify_port	= serial_txx9_verify_port,
+};
+
+static struct uart_txx9_port serial_txx9_ports[UART_NR];
+
+static void __init serial_txx9_register_ports(struct uart_driver *drv)
+{
+	int i;
+
+	for (i = 0; i < UART_NR; i++) {
+		struct uart_txx9_port *up = &serial_txx9_ports[i];
+
+		up->port.line = i;
+		up->port.ops = &serial_txx9_pops;
+		uart_add_one_port(drv, &up->port);
+	}
+}
+
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+
+/*
+ *	Wait for transmitter & holding register to empty
+ */
+static inline void wait_for_xmitr(struct uart_txx9_port *up)
+{
+	unsigned int tmout = 10000;
+
+	/* Wait up to 10ms for the character(s) to be sent. */
+	while (--tmout &&
+	       !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS))
+		udelay(1);
+
+	/* Wait up to 1s for flow control if necessary */
+	if (up->port.flags & UPF_CONS_FLOW) {
+		tmout = 1000000;
+		while (--tmout &&
+		       (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS))
+			udelay(1);
+	}
+}
+
+/*
+ *	Print a string to the serial port trying not to disturb
+ *	any possible real use of the port...
+ *
+ *	The console_lock must be held when we get here.
+ */
+static void
+serial_txx9_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct uart_txx9_port *up = &serial_txx9_ports[co->index];
+	unsigned int ier, flcr;
+	int i;
+
+	/*
+	 *	First save the UER then disable the interrupts
+	 */
+	ier = sio_in(up, TXX9_SIDICR);
+	sio_out(up, TXX9_SIDICR, 0);
+	/*
+	 *	Disable flow-control if enabled (and unnecessary)
+	 */
+	flcr = sio_in(up, TXX9_SIFLCR);
+	if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES))
+		sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES);
+
+	/*
+	 *	Now, do each character
+	 */
+	for (i = 0; i < count; i++, s++) {
+		wait_for_xmitr(up);
+
+		/*
+		 *	Send the character out.
+		 *	If a LF, also do CR...
+		 */
+		sio_out(up, TXX9_SITFIFO, *s);
+		if (*s == 10) {
+			wait_for_xmitr(up);
+			sio_out(up, TXX9_SITFIFO, 13);
+		}
+	}
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and restore the IER
+	 */
+	wait_for_xmitr(up);
+	sio_out(up, TXX9_SIFLCR, flcr);
+	sio_out(up, TXX9_SIDICR, ier);
+}
+
+static int serial_txx9_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	struct uart_txx9_port *up;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	/*
+	 * Check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (co->index >= UART_NR)
+		co->index = 0;
+	up = &serial_txx9_ports[co->index];
+	port = &up->port;
+	if (!port->ops)
+		return -ENODEV;
+
+	/*
+	 * Temporary fix.
+	 */
+	spin_lock_init(&port->lock);
+
+	/*
+	 *	Disable UART interrupts, set DTR and RTS high
+	 *	and set speed.
+	 */
+	sio_out(up, TXX9_SIDICR, 0);
+	/* initial settings */
+	sio_out(up, TXX9_SILCR,
+		TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
+		((port->flags & UPF_TXX9_USE_SCLK) ?
+		 TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
+	sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver serial_txx9_reg;
+static struct console serial_txx9_console = {
+	.name		= TXX9_TTY_NAME,
+	.write		= serial_txx9_console_write,
+	.device		= uart_console_device,
+	.setup		= serial_txx9_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &serial_txx9_reg,
+};
+
+static int __init serial_txx9_console_init(void)
+{
+	register_console(&serial_txx9_console);
+	return 0;
+}
+console_initcall(serial_txx9_console_init);
+
+static int __init serial_txx9_late_console_init(void)
+{
+	if (!(serial_txx9_console.flags & CON_ENABLED))
+		register_console(&serial_txx9_console);
+	return 0;
+}
+late_initcall(serial_txx9_late_console_init);
+
+#define SERIAL_TXX9_CONSOLE	&serial_txx9_console
+#else
+#define SERIAL_TXX9_CONSOLE	NULL
+#endif
+
+static struct uart_driver serial_txx9_reg = {
+	.owner			= THIS_MODULE,
+	.driver_name		= "serial_txx9",
+	.devfs_name		= TXX9_TTY_DEVFS_NAME,
+	.dev_name		= TXX9_TTY_NAME,
+	.major			= TXX9_TTY_MAJOR,
+	.minor			= TXX9_TTY_MINOR_START,
+	.nr			= UART_NR,
+	.cons			= SERIAL_TXX9_CONSOLE,
+};
+
+int __init early_serial_txx9_setup(struct uart_port *port)
+{
+	if (port->line >= ARRAY_SIZE(serial_txx9_ports))
+		return -ENODEV;
+
+	serial_txx9_ports[port->line].port = *port;
+	serial_txx9_ports[port->line].port.ops = &serial_txx9_pops;
+	serial_txx9_ports[port->line].port.flags |= UPF_BOOT_AUTOCONF;
+	return 0;
+}
+
+#ifdef ENABLE_SERIAL_TXX9_PCI
+/**
+ *	serial_txx9_suspend_port - suspend one serial port
+ *	@line:  serial line number
+ *      @level: the level of port suspension, as per uart_suspend_port
+ *
+ *	Suspend one serial port.
+ */
+static void serial_txx9_suspend_port(int line)
+{
+	uart_suspend_port(&serial_txx9_reg, &serial_txx9_ports[line].port);
+}
+
+/**
+ *	serial_txx9_resume_port - resume one serial port
+ *	@line:  serial line number
+ *      @level: the level of port resumption, as per uart_resume_port
+ *
+ *	Resume one serial port.
+ */
+static void serial_txx9_resume_port(int line)
+{
+	uart_resume_port(&serial_txx9_reg, &serial_txx9_ports[line].port);
+}
+
+/*
+ * Probe one serial board.  Unfortunately, there is no rhyme nor reason
+ * to the arrangement of serial ports on a PCI card.
+ */
+static int __devinit
+pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+	struct uart_port port;
+	int line;
+	int rc;
+
+	rc = pci_enable_device(dev);
+	if (rc)
+		return rc;
+
+	memset(&port, 0, sizeof(port));
+	port.ops = &serial_txx9_pops;
+	port.flags |= UPF_BOOT_AUTOCONF; /* uart_ops.config_port will be called */
+	port.flags |= UPF_TXX9_HAVE_CTS_LINE;
+	port.uartclk = 66670000;
+	port.irq = dev->irq;
+	port.iotype = UPIO_PORT;
+	port.iobase = pci_resource_start(dev, 1);
+	line = uart_register_port(&serial_txx9_reg, &port);
+	if (line < 0) {
+		printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line);
+	}
+	pci_set_drvdata(dev, (void *)(long)line);
+
+	return 0;
+}
+
+static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev)
+{
+	int line = (int)(long)pci_get_drvdata(dev);
+
+	pci_set_drvdata(dev, NULL);
+
+	if (line) {
+		uart_unregister_port(&serial_txx9_reg, line);
+		pci_disable_device(dev);
+	}
+}
+
+static int pciserial_txx9_suspend_one(struct pci_dev *dev, u32 state)
+{
+	int line = (int)(long)pci_get_drvdata(dev);
+
+	if (line)
+		serial_txx9_suspend_port(line);
+	return 0;
+}
+
+static int pciserial_txx9_resume_one(struct pci_dev *dev)
+{
+	int line = (int)(long)pci_get_drvdata(dev);
+
+	if (line)
+		serial_txx9_resume_port(line);
+	return 0;
+}
+
+static struct pci_device_id serial_txx9_pci_tbl[] = {
+	{	PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, 0 },
+	{ 0, }
+};
+
+static struct pci_driver serial_txx9_pci_driver = {
+	.name		= "serial_txx9",
+	.probe		= pciserial_txx9_init_one,
+	.remove		= __devexit_p(pciserial_txx9_remove_one),
+	.suspend	= pciserial_txx9_suspend_one,
+	.resume		= pciserial_txx9_resume_one,
+	.id_table	= serial_txx9_pci_tbl,
+};
+
+MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl);
+#endif /* ENABLE_SERIAL_TXX9_PCI */
+
+static int __init serial_txx9_init(void)
+{
+	int ret;
+
+ 	printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
+
+	ret = uart_register_driver(&serial_txx9_reg);
+	if (ret >= 0) {
+		serial_txx9_register_ports(&serial_txx9_reg);
+
+#ifdef ENABLE_SERIAL_TXX9_PCI
+		ret = pci_module_init(&serial_txx9_pci_driver);
+#endif
+	}
+	return ret;
+}
+
+static void __exit serial_txx9_exit(void)
+{
+	int i;
+
+#ifdef ENABLE_SERIAL_TXX9_PCI
+	pci_unregister_driver(&serial_txx9_pci_driver);
+#endif
+	for (i = 0; i < UART_NR; i++)
+		uart_remove_one_port(&serial_txx9_reg, &serial_txx9_ports[i].port);
+
+	uart_unregister_driver(&serial_txx9_reg);
+}
+
+module_init(serial_txx9_init);
+module_exit(serial_txx9_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("TX39/49 serial driver");
+
+MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR);