Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 573 insertions, 0 deletions

diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
new file mode 100644
index 000000000000..2892169eff05
--- /dev/null
+++ b/drivers/serial/sh-sci.h
@@ -0,0 +1,573 @@
+/* $Id: sh-sci.h,v 1.4 2004/02/19 16:43:56 lethal Exp $
+ *
+ *  linux/drivers/serial/sh-sci.h
+ *
+ *  SuperH on-chip serial module support.  (SCI with no FIFO / with FIFO)
+ *  Copyright (C) 1999, 2000  Niibe Yutaka
+ *  Copyright (C) 2000  Greg Banks
+ *  Copyright (C) 2002, 2003  Paul Mundt
+ *  Modified to support multiple serial ports. Stuart Menefy (May 2000).
+ *  Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
+ *  Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
+ */
+#include <linux/config.h>
+#include <linux/serial_core.h>
+
+#if defined(__H8300H__) || defined(__H8300S__)
+#include <asm/gpio.h>
+#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
+#include <asm/regs306x.h>
+#endif
+#if defined(CONFIG_H8S2678)
+#include <asm/regs267x.h>
+#endif
+#endif
+
+/* Offsets into the sci_port->irqs array */
+#define SCIx_ERI_IRQ 0
+#define SCIx_RXI_IRQ 1
+#define SCIx_TXI_IRQ 2
+
+/*                     ERI, RXI, TXI, BRI */
+#define SCI_IRQS      { 23,  24,  25,   0 }
+#define SH3_SCIF_IRQS { 56,  57,  59,  58 }
+#define SH3_IRDA_IRQS { 52,  53,  55,  54 }
+#define SH4_SCIF_IRQS { 40,  41,  43,  42 }
+#define STB1_SCIF1_IRQS {23, 24,  26,  25 }
+#define SH7760_SCIF0_IRQS { 52, 53, 55, 54 }
+#define SH7760_SCIF1_IRQS { 72, 73, 75, 74 }
+#define SH7760_SCIF2_IRQS { 76, 77, 79, 78 }
+#define SH7300_SCIF0_IRQS {80,  80,  80,  80 }
+#define SH73180_SCIF_IRQS {80,  81,  83,  82 }
+#define H8300H_SCI_IRQS0 {52, 53, 54,   0 }
+#define H8300H_SCI_IRQS1 {56, 57, 58,   0 }
+#define H8300H_SCI_IRQS2 {60, 61, 62,   0 }
+#define H8S_SCI_IRQS0 {88, 89, 90,   0 }
+#define H8S_SCI_IRQS1 {92, 93, 94,   0 }
+#define H8S_SCI_IRQS2 {96, 97, 98,   0 }
+#define SH5_SCIF_IRQS {39, 40, 42,   0 }
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7708)
+# define SCI_NPORTS 1
+# define SCSPTR 0xffffff7c /* 8 bit */
+# define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCI_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+# define SCI_NPORTS 3
+# define SCPCR  0xA4000116 /* 16 bit SCI and SCIF */
+# define SCPDR  0xA4000136 /* 8  bit SCI and SCIF */
+# define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCI_AND_SCIF
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+# define SCIF0		0xA4400000
+# define SCIF2		0xA4410000
+# define SCSMR_Ir 	0xA44A0000
+# define IRDA_SCIF 	SCIF0
+# define SCI_NPORTS 2
+# define SCPCR 0xA4000116
+# define SCPDR 0xA4000136
+
+/* Set the clock source,
+ * SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input
+ * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output
+ */
+# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
+# define SCIF_ONLY
+#elif defined(CONFIG_SH_RTS7751R2D)
+# define SCI_NPORTS 1
+# define SCSPTR1 0xffe0001c /* 8  bit SCI */
+# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001   /* overrun error bit */
+# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
+# define SCI_NPORTS 2
+# define SCSPTR1 0xffe0001c /* 8  bit SCI */
+# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001   /* overrun error bit */
+# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \
+	0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
+	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
+# define SCI_AND_SCIF
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+# define SCI_NPORTS 3
+# define SCSPTR0 0xfe600000 /* 16 bit SCIF */
+# define SCSPTR1 0xfe610000 /* 16 bit SCIF */
+# define SCSPTR2 0xfe620000 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001  /* overrun error bit */
+# define SCSCR_INIT(port)          0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
+# define SCI_NPORTS 1
+# define SCPCR  0xA4050116        /* 16 bit SCIF */
+# define SCPDR  0xA4050136        /* 16 bit SCIF */
+# define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
+# define SCI_NPORTS 1
+# define SCPDR  0xA4050138        /* 16 bit SCIF */
+# define SCSPTR2 SCPDR
+# define SCIF_ORER 0x0001   /* overrun error bit */
+# define SCSCR_INIT(port)  0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+# define SCI_NPORTS 1
+# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001   /* overrun error bit */
+# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+# define SCI_NPORTS 2
+# define SCSPTR1 0xffe00020 /* 16 bit SCIF */
+# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001   /* overrun error bit */
+# define SCSCR_INIT(port)          0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
+# include <asm/hardware.h>
+# define SCIF_BASE_ADDR    0x01030000
+# define SCIF_ADDR_SH5     PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
+# define SCIF_PTR2_OFFS    0x0000020
+# define SCIF_LSR2_OFFS    0x0000024
+# define SCI_NPORTS 1
+# define SCI_INIT { \
+  { {}, PORT_SCIF, 0, \
+     SH5_SCIF_IRQS, sci_init_pins_scif }  \
+}
+# define SCSPTR2           ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
+# define SCLSR2            ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
+# define SCSCR_INIT(port)  0x38                           /* TIE=0,RIE=0,
+							     TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
+# define SCI_NPORTS 3
+# define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCI_ONLY
+# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
+#elif defined(CONFIG_H8S2678)
+# define SCI_NPORTS 3
+# define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCI_ONLY
+# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
+#else
+# error CPU subtype not defined
+#endif
+
+/* SCSCR */
+#define SCI_CTRL_FLAGS_TIE  0x80 /* all */
+#define SCI_CTRL_FLAGS_RIE  0x40 /* all */
+#define SCI_CTRL_FLAGS_TE   0x20 /* all */
+#define SCI_CTRL_FLAGS_RE   0x10 /* all */
+#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
+#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
+#else
+#define SCI_CTRL_FLAGS_REIE 0
+#endif
+/*      SCI_CTRL_FLAGS_MPIE 0x08  * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+/*      SCI_CTRL_FLAGS_TEIE 0x04  * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+/*      SCI_CTRL_FLAGS_CKE1 0x02  * all */
+/*      SCI_CTRL_FLAGS_CKE0 0x01  * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */
+
+/* SCxSR SCI */
+#define SCI_TDRE  0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+#define SCI_RDRF  0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+#define SCI_ORER  0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+#define SCI_FER   0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+#define SCI_PER   0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+#define SCI_TEND  0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+/*      SCI_MPB   0x02  * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+/*      SCI_MPBT  0x01  * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+
+#define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER)
+
+/* SCxSR SCIF */
+#define SCIF_ER    0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_TEND  0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_TDFE  0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_BRK   0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_FER   0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_PER   0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_RDF   0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_DR    0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define SCIF_ORER    0x0200
+#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
+#define SCIF_RFDC_MASK 0x007f
+#define SCIF_TXROOM_MAX 64
+#else
+#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
+#define SCIF_RFDC_MASK 0x001f
+#define SCIF_TXROOM_MAX 16
+#endif
+
+#if defined(SCI_ONLY)
+# define SCxSR_TEND(port)		SCI_TEND
+# define SCxSR_ERRORS(port)		SCI_ERRORS
+# define SCxSR_RDxF(port)               SCI_RDRF
+# define SCxSR_TDxE(port)               SCI_TDRE
+# define SCxSR_ORER(port)		SCI_ORER
+# define SCxSR_FER(port)		SCI_FER
+# define SCxSR_PER(port)		SCI_PER
+# define SCxSR_BRK(port)		0x00
+# define SCxSR_RDxF_CLEAR(port)		0xbc
+# define SCxSR_ERROR_CLEAR(port)	0xc4
+# define SCxSR_TDxE_CLEAR(port)		0x78
+# define SCxSR_BREAK_CLEAR(port)   	0xc4
+#elif defined(SCIF_ONLY)
+# define SCxSR_TEND(port)		SCIF_TEND
+# define SCxSR_ERRORS(port)		SCIF_ERRORS
+# define SCxSR_RDxF(port)               SCIF_RDF
+# define SCxSR_TDxE(port)               SCIF_TDFE
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+# define SCxSR_ORER(port)		SCIF_ORER
+#else
+# define SCxSR_ORER(port)		0x0000
+#endif
+# define SCxSR_FER(port)		SCIF_FER
+# define SCxSR_PER(port)		SCIF_PER
+# define SCxSR_BRK(port)		SCIF_BRK
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+# define SCxSR_RDxF_CLEAR(port)         (sci_in(port,SCxSR)&0xfffc)
+# define SCxSR_ERROR_CLEAR(port)        (sci_in(port,SCxSR)&0xfd73)
+# define SCxSR_TDxE_CLEAR(port)         (sci_in(port,SCxSR)&0xffdf)
+# define SCxSR_BREAK_CLEAR(port)        (sci_in(port,SCxSR)&0xffe3)
+#else
+/* SH7705 can also use this, clearing is same between 7705 and 7709 and 7300 */
+# define SCxSR_RDxF_CLEAR(port)		0x00fc
+# define SCxSR_ERROR_CLEAR(port)	0x0073
+# define SCxSR_TDxE_CLEAR(port)		0x00df
+# define SCxSR_BREAK_CLEAR(port)   	0x00e3
+#endif
+#else
+# define SCxSR_TEND(port)	 (((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
+# define SCxSR_ERRORS(port)	 (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
+# define SCxSR_RDxF(port)        (((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
+# define SCxSR_TDxE(port)        (((port)->type == PORT_SCI) ? SCI_TDRE   : SCIF_TDFE)
+# define SCxSR_ORER(port)        (((port)->type == PORT_SCI) ? SCI_ORER   : 0x0000)
+# define SCxSR_FER(port)         (((port)->type == PORT_SCI) ? SCI_FER    : SCIF_FER)
+# define SCxSR_PER(port)         (((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
+# define SCxSR_BRK(port)         (((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
+# define SCxSR_RDxF_CLEAR(port)	 (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
+# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
+# define SCxSR_TDxE_CLEAR(port)  (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
+# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3)
+#endif
+
+/* SCFCR */
+#define SCFCR_RFRST 0x0002
+#define SCFCR_TFRST 0x0004
+#define SCFCR_TCRST 0x4000
+#define SCFCR_MCE   0x0008
+
+#define SCI_MAJOR		204
+#define SCI_MINOR_START		8
+
+/* Generic serial flags */
+#define SCI_RX_THROTTLE		0x0000001
+
+#define SCI_MAGIC 0xbabeface
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at rs interrupt time.
+ */
+#define SCI_EVENT_WRITE_WAKEUP	0
+
+struct sci_port {
+	struct uart_port port;
+	int type;
+	unsigned char irqs[4]; /* ERI, RXI, TXI, BRI */
+	void (*init_pins)(struct uart_port *port, unsigned int cflag);
+	int break_flag;
+	struct timer_list break_timer;
+};
+
+#define SCI_IN(size, offset)					\
+  unsigned int addr = port->mapbase + (offset);			\
+  if ((size) == 8) { 						\
+    return ctrl_inb(addr);					\
+  } else {					 		\
+    return ctrl_inw(addr);					\
+  }
+#define SCI_OUT(size, offset, value)				\
+  unsigned int addr = port->mapbase + (offset);			\
+  if ((size) == 8) { 						\
+    ctrl_outb(value, addr);					\
+  } else {							\
+    ctrl_outw(value, addr);					\
+  }
+
+#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
+  static inline unsigned int sci_##name##_in(struct uart_port *port)	\
+  {									\
+    if (port->type == PORT_SCI) { 					\
+      SCI_IN(sci_size, sci_offset)					\
+    } else {								\
+      SCI_IN(scif_size, scif_offset);		 			\
+    }									\
+  }									\
+  static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
+  {									\
+    if (port->type == PORT_SCI) {					\
+      SCI_OUT(sci_size, sci_offset, value)				\
+    } else {								\
+      SCI_OUT(scif_size, scif_offset, value);				\
+    }									\
+  }
+
+#define CPU_SCIF_FNS(name, scif_offset, scif_size)				\
+  static inline unsigned int sci_##name##_in(struct uart_port *port)	\
+  {									\
+    SCI_IN(scif_size, scif_offset);		 			\
+  }									\
+  static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
+  {									\
+    SCI_OUT(scif_size, scif_offset, value);				\
+  }
+
+#define CPU_SCI_FNS(name, sci_offset, sci_size)				\
+  static inline unsigned int sci_##name##_in(struct uart_port* port)	\
+  {									\
+    SCI_IN(sci_size, sci_offset);		 			\
+  }									\
+  static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \
+  {									\
+    SCI_OUT(sci_size, sci_offset, value);				\
+  }
+
+#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define SCIF_FNS(name, scif_offset, scif_size) \
+  CPU_SCIF_FNS(name, scif_offset, scif_size)
+#else
+#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
+		 sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
+                 h8_sci_offset, h8_sci_size) \
+  CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh3_scif_offset, sh3_scif_size)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
+  CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size)
+#endif
+#elif defined(__H8300H__) || defined(__H8300S__)
+#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
+		 sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
+                 h8_sci_offset, h8_sci_size) \
+  CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
+#else
+#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
+		 sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
+		 h8_sci_offset, h8_sci_size) \
+  CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
+  CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+SCIF_FNS(SCSMR,  0x00, 16)
+SCIF_FNS(SCBRR,  0x04,  8)
+SCIF_FNS(SCSCR,  0x08, 16)
+SCIF_FNS(SCTDSR, 0x0c,  8)
+SCIF_FNS(SCFER,  0x10, 16)
+SCIF_FNS(SCxSR,  0x14, 16)
+SCIF_FNS(SCFCR,  0x18, 16)
+SCIF_FNS(SCFDR,  0x1c, 16)
+SCIF_FNS(SCxTDR, 0x20,  8)
+SCIF_FNS(SCxRDR, 0x24,  8)
+SCIF_FNS(SCLSR,  0x24, 16)
+#else
+/*      reg      SCI/SH3   SCI/SH4  SCIF/SH3   SCIF/SH4  SCI/H8*/
+/*      name     off  sz   off  sz   off  sz   off  sz   off  sz*/
+SCIx_FNS(SCSMR,  0x00,  8, 0x00,  8, 0x00,  8, 0x00, 16, 0x00,  8)
+SCIx_FNS(SCBRR,  0x02,  8, 0x04,  8, 0x02,  8, 0x04,  8, 0x01,  8)
+SCIx_FNS(SCSCR,  0x04,  8, 0x08,  8, 0x04,  8, 0x08, 16, 0x02,  8)
+SCIx_FNS(SCxTDR, 0x06,  8, 0x0c,  8, 0x06,  8, 0x0C,  8, 0x03,  8)
+SCIx_FNS(SCxSR,  0x08,  8, 0x10,  8, 0x08, 16, 0x10, 16, 0x04,  8)
+SCIx_FNS(SCxRDR, 0x0a,  8, 0x14,  8, 0x0A,  8, 0x14,  8, 0x05,  8)
+SCIF_FNS(SCFCR,                      0x0c,  8, 0x18, 16)
+SCIF_FNS(SCFDR,                      0x0e, 16, 0x1C, 16)
+SCIF_FNS(SCSPTR,                        0,  0, 0x20, 16)
+SCIF_FNS(SCLSR,                         0,  0, 0x24, 16)
+#endif
+#define sci_in(port, reg) sci_##reg##_in(port)
+#define sci_out(port, reg, value) sci_##reg##_out(port, value)
+
+/* H8/300 series SCI pins assignment */
+#if defined(__H8300H__) || defined(__H8300S__)
+static const struct __attribute__((packed)) {
+	int port;             /* GPIO port no */
+	unsigned short rx,tx; /* GPIO bit no */
+} h8300_sci_pins[] = {
+#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
+	{    /* SCI0 */
+		.port = H8300_GPIO_P9,
+		.rx   = H8300_GPIO_B2,
+		.tx   = H8300_GPIO_B0,
+	},
+	{    /* SCI1 */
+		.port = H8300_GPIO_P9,
+		.rx   = H8300_GPIO_B3,
+		.tx   = H8300_GPIO_B1,
+	},
+	{    /* SCI2 */
+		.port = H8300_GPIO_PB,
+		.rx   = H8300_GPIO_B7,
+		.tx   = H8300_GPIO_B6,
+	}
+#elif defined(CONFIG_H8S2678)
+	{    /* SCI0 */
+		.port = H8300_GPIO_P3,
+		.rx   = H8300_GPIO_B2,
+		.tx   = H8300_GPIO_B0,
+	},
+	{    /* SCI1 */
+		.port = H8300_GPIO_P3,
+		.rx   = H8300_GPIO_B3,
+		.tx   = H8300_GPIO_B1,
+	},
+	{    /* SCI2 */
+		.port = H8300_GPIO_P5,
+		.rx   = H8300_GPIO_B1,
+		.tx   = H8300_GPIO_B0,
+	}
+#endif
+};
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7708)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xfffffe80)
+		return ctrl_inb(SCSPTR)&0x01 ? 1 : 0; /* SCI */
+	return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xfffffe80)
+		return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */
+	if (port->mapbase == 0xa4000150)
+		return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xa4000140)
+		return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
+	return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == SCIF0)
+		return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
+	if (port->mapbase == SCIF2)
+		return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
+	return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+      defined(CONFIG_CPU_SUBTYPE_SH4_202)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+#ifndef SCIF_ONLY
+	if (port->mapbase == 0xffe00000)
+		return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
+#endif
+#ifndef SCI_ONLY
+	if (port->mapbase == 0xffe80000)
+		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+#endif
+	return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xfe600000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfe610000)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfe620000)
+		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+        if (port->mapbase == 0xa4430000)
+                return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
+        return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
+}
+#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xffe00000)
+		return ctrl_inw(SCSPTR1)&0x0001 ? 1 : 0; /* SCIF */
+	else
+		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+         return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
+}
+#elif defined(__H8300H__) || defined(__H8300S__)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	int ch = (port->mapbase - SMR0) >> 3;
+	return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0;
+}
+#endif
+
+/*
+ * Values for the BitRate Register (SCBRR)
+ *
+ * The values are actually divisors for a frequency which can
+ * be internal to the SH3 (14.7456MHz) or derived from an external
+ * clock source.  This driver assumes the internal clock is used;
+ * to support using an external clock source, config options or
+ * possibly command-line options would need to be added.
+ *
+ * Also, to support speeds below 2400 (why?) the lower 2 bits of
+ * the SCSMR register would also need to be set to non-zero values.
+ *
+ * -- Greg Banks 27Feb2000
+ *
+ * Answer: The SCBRR register is only eight bits, and the value in
+ * it gets larger with lower baud rates. At around 2400 (depending on
+ * the peripherial module clock) you run out of bits. However the
+ * lower two bits of SCSMR allow the module clock to be divided down,
+ * scaling the value which is needed in SCBRR.
+ *
+ * -- Stuart Menefy - 23 May 2000
+ *
+ * I meant, why would anyone bother with bitrates below 2400.
+ *
+ * -- Greg Banks - 7Jul2000
+ *
+ * You "speedist"!  How will I use my 110bps ASR-33 teletype with paper
+ * tape reader as a console!
+ *
+ * -- Mitch Davis - 15 Jul 2000
+ */
+
+#define PCLK           (current_cpu_data.module_clock)
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+#define SCBRR_VALUE(bps) ((PCLK+16*bps)/(16*bps)-1)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define SCBRR_VALUE(bps) (((PCLK*2)+16*bps)/(32*bps)-1)
+#elif !defined(__H8300H__) && !defined(__H8300S__)
+#define SCBRR_VALUE(bps) ((PCLK+16*bps)/(32*bps)-1)
+#else
+#define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)
+#endif
+#define BPS_2400       SCBRR_VALUE(2400)
+#define BPS_4800       SCBRR_VALUE(4800)
+#define BPS_9600       SCBRR_VALUE(9600)
+#define BPS_19200      SCBRR_VALUE(19200)
+#define BPS_38400      SCBRR_VALUE(38400)
+#define BPS_57600      SCBRR_VALUE(57600)
+#define BPS_115200     SCBRR_VALUE(115200)
+