diff options
| author |   Robin Gong <yibin.gong@nxp.com> | 2018-10-10 10:32:45 +0000 |
|---|---|---|
| committer |   Mark Brown <broonie@kernel.org> | 2018-10-12 18:54:01 +0200 |
| commit | 5ba5a3730639caddf42af11c60f3f3d99d9a5f00 (patch) | |
| tree | b7ef3de7c798a261830848d9127ccafc41148aad /drivers/spi | |
| parent | spi: imx: move wml setting to later than setup_transfer (diff) | |
| download | linux-dev-5ba5a3730639caddf42af11c60f3f3d99d9a5f00.tar.xz linux-dev-5ba5a3730639caddf42af11c60f3f3d99d9a5f00.zip | |
spi: imx: correct wml as the last sg length
Correct wml as the last rx sg length instead of the whole transfer
length. Otherwise, mtd_stresstest will be failed as below:
insmod mtd_stresstest.ko dev=0
=================================================
mtd_stresstest: MTD device: 0
mtd_stresstest: not NAND flash, assume page size is 512 bytes.
mtd_stresstest: MTD device size 4194304, eraseblock size 65536, page size 512, count of eraseblocks 64, pa0
mtd_stresstest: doing operations
mtd_stresstest: 0 operations done
mtd_test: mtd_read from 1ff532, size 880
mtd_test: mtd_read from 20c267, size 64998
spi_master spi0: I/O Error in DMA RX
m25p80 spi0.0: SPI transfer failed: -110
spi_master spi0: failed to transfer one message from queue
mtd_test: error: read failed at 0x20c267
mtd_stresstest: error -110 occurred
=================================================
insmod: ERROR: could not insert module mtd_stresstest.ko: Connection timed out
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/spi-imx.c | 29 |
1 files changed, 19 insertions, 10 deletions
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index e861157e3459..037abbb852a4 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -217,7 +217,6 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, struct spi_transfer *transfer) { struct spi_imx_data *spi_imx = spi_master_get_devdata(master); - unsigned int bytes_per_word, i; if (!master->dma_rx) return false; @@ -225,14 +224,6 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, if (spi_imx->slave_mode) return false; - bytes_per_word = spi_imx_bytes_per_word(transfer->bits_per_word); - - for (i = spi_imx->devtype_data->fifo_size / 2; i > 0; i--) { - if (!(transfer->len % (i * bytes_per_word))) - break; - } - - spi_imx->wml = i; spi_imx->dynamic_burst = 0; return true; @@ -594,7 +585,7 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx) * and enable DMA request. */ - writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml) | + writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) | MX51_ECSPI_DMA_TX_WML(spi_imx->wml) | MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) | MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN | @@ -1287,12 +1278,30 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, unsigned long timeout; struct spi_master *master = spi_imx->bitbang.master; struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg; + struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents); + unsigned int bytes_per_word, i; int ret; + /* Get the right burst length from the last sg to ensure no tail data */ + bytes_per_word = spi_imx_bytes_per_word(transfer->bits_per_word); + for (i = spi_imx->devtype_data->fifo_size / 2; i > 0; i--) { + if (!(sg_dma_len(last_sg) % (i * bytes_per_word))) + break; + } + /* Use 1 as wml in case no available burst length got */ + if (i == 0) + i = 1; + + spi_imx->wml = i; + ret = spi_imx_dma_configure(master); if (ret) return ret; + if (!spi_imx->devtype_data->setup_wml) { + dev_err(spi_imx->dev, "No setup_wml()?\n"); + return -EINVAL; + } spi_imx->devtype_data->setup_wml(spi_imx); /* |