staging: comedi: cleanup all the comedi_driver 'detach' functions

1. Change the return type from int to void

All the detach functions, except for the comedi usb drivers, simply
return success (0). Plus, the return code is never checked in the
comedi core.

The comedi usb drivers do return error codes but the conditions can
never happen.

The first check is:

	if (!dev)
		return -EFAULT;

This checks that the passed comedi_device pointer is valid. The detach
function itself is called using this pointer so it MUST always be valid
or there is a bug in the core:

	if (dev->driver)
		dev->driver->detach(dev);

And the second check:

	usb = dev->private;
	if (!usb)
		return -EFAULT;

The dev->private pointer is setup in the attach function to point to the
probed usb device. This value could be NULL if the attach fails. But,
since the comedi core is going to unload the driver anyway and does not
check for errors there is no gain by returning one.

After removing these checks from the comedi usb drivers the detach
functions required a bit of cleanup.

2. Remove all the printk noise in the detach functions

All of the printk output is really just noise. The user did a rmmod to
unload the driver, we really don't need to tell them about it.

Also, some of the messages are output using:

	dev_dbg(dev->hw_dev, ...
or
	dev_info(dev->hw_dev, ...

Unfortunately the hw_dev value is only used by drivers that are doing
DMA. For most drivers this variable is going to be NULL so the output
is not going to work as expected.

3. Refactor a couple static 'free_resource' functions into the detach
   functions.

The 'free_resource' function is only being called by the detach and it
makes more sense to just absorb the code.

4. Remove a couple unnecessary braces for single statements.

5. Remove unnecessary comments.

Most of the comedi drivers appear to be based on the comedi skel driver
and have the comments from that driver included. These comments make
sense in the skel driver for reference but they don't need to be in any
of the actual drivers.

6. Remove all the extra whitespace.

It's not needed to make the functions any more readable.

7. Remove the now unused 'attached_successfully' variable in the
   cb_pcimdda driver.

This variable was only used to conditionally output some driver noise
during the detach. Since all the printk's have been removed this
variable is no longer necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 2 insertions, 13 deletions

diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index 2b4e6e6eb825..83828903db4b 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -224,7 +224,7 @@ struct dmm32at_private {
  */
 static int dmm32at_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it);
-static int dmm32at_detach(struct comedi_device *dev);
+static void dmm32at_detach(struct comedi_device *dev);
 static struct comedi_driver driver_dmm32at = {
 	.driver_name = "dmm32at",
 	.module = THIS_MODULE,
@@ -450,23 +450,12 @@ static int dmm32at_attach(struct comedi_device *dev,
 
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int dmm32at_detach(struct comedi_device *dev)
+static void dmm32at_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: dmm32at: remove\n", dev->minor);
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 	if (dev->iobase)
 		release_region(dev->iobase, DMM32AT_MEMSIZE);
-
-	return 0;
 }
 
 /*