Staging: et1310: Fix the coding style

UTF-8 for copyright symbols etc included. Typedefs and anything else which
would cause actual code changes skipped.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 62 insertions, 61 deletions

diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index 59e99cc7786b..74a8375f9477 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -2,7 +2,7 @@
  * Agere Systems Inc.
  * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
  *
- * Copyright © 2005 Agere Systems Inc.
+ * Copyright © 2005 Agere Systems Inc.
  * All rights reserved.
  *   http://www.agere.com
  *
@@ -19,7 +19,7 @@
  * software indicates your acceptance of these terms and conditions.  If you do
  * not agree with these terms and conditions, do not use the software.
  *
- * Copyright © 2005 Agere Systems Inc.
+ * Copyright © 2005 Agere Systems Inc.
  * All rights reserved.
  *
  * Redistribution and use in source or binary forms, with or without
@@ -40,7 +40,7 @@
  *
  * Disclaimer
  *
- * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
  * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
  * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
@@ -73,9 +73,9 @@
 #include <linux/interrupt.h>
 #include <linux/in.h>
 #include <linux/delay.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
 #include <asm/system.h>
-#include <asm/bitops.h>
 
 #include <linux/mii.h>
 #include <linux/netdevice.h>
@@ -153,16 +153,16 @@ struct net_device *et131x_device_alloc(void)
 	/* Setup the function registration table (and other data) for a
 	 * net_device
 	 */
-	//netdev->init               = &et131x_init;
-	//netdev->set_config = &et131x_config;
+	/* netdev->init               = &et131x_init; */
+	/* netdev->set_config = &et131x_config; */
 	netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
 	netdev->netdev_ops = &et131x_netdev_ops;
 
-	//netdev->ethtool_ops        = &et131x_ethtool_ops;
+	/* netdev->ethtool_ops        = &et131x_ethtool_ops; */
 
-	// Poll?
-	//netdev->poll               = &et131x_poll;
-	//netdev->poll_controller    = &et131x_poll_controller;
+	/* Poll? */
+	/* netdev->poll               = &et131x_poll; */
+	/* netdev->poll_controller    = &et131x_poll_controller; */
 
 	DBG_LEAVE(et131x_dbginfo);
 	return netdev;
@@ -194,23 +194,25 @@ struct net_device_stats *et131x_stats(struct net_device *netdev)
 	stats->rx_over_errors = devstat->rx_ov_flow;
 	stats->rx_crc_errors = devstat->crc_err;
 
-	// NOTE: These stats don't have corresponding values in CE_STATS, so we're
-	//       going to have to update these directly from within the TX/RX code
-	//stats->rx_bytes            = 20; //devstat->;
-	//stats->tx_bytes            = 20; //devstat->;
-	//stats->rx_dropped          = devstat->;
-	//stats->tx_dropped          = devstat->;
-
-	// NOTE: Not used, can't find analogous statistics
-	//stats->rx_frame_errors     = devstat->;
-	//stats->rx_fifo_errors      = devstat->;
-	//stats->rx_missed_errors    = devstat->;
-
-	//stats->tx_aborted_errors   = devstat->;
-	//stats->tx_carrier_errors   = devstat->;
-	//stats->tx_fifo_errors      = devstat->;
-	//stats->tx_heartbeat_errors = devstat->;
-	//stats->tx_window_errors    = devstat->;
+	/* NOTE: These stats don't have corresponding values in CE_STATS,
+	 * so we're going to have to update these directly from within the
+	 * TX/RX code
+	 */
+	/* stats->rx_bytes            = 20; devstat->; */
+	/* stats->tx_bytes            = 20;  devstat->; */
+	/* stats->rx_dropped          = devstat->; */
+	/* stats->tx_dropped          = devstat->; */
+
+	/*  NOTE: Not used, can't find analogous statistics */
+	/* stats->rx_frame_errors     = devstat->; */
+	/* stats->rx_fifo_errors      = devstat->; */
+	/* stats->rx_missed_errors    = devstat->; */
+
+	/* stats->tx_aborted_errors   = devstat->; */
+	/* stats->tx_carrier_errors   = devstat->; */
+	/* stats->tx_fifo_errors      = devstat->; */
+	/* stats->tx_heartbeat_errors = devstat->; */
+	/* stats->tx_window_errors    = devstat->; */
 
 	DBG_LEAVE(et131x_dbginfo);
 	return stats;
@@ -414,10 +416,11 @@ int et131x_set_packet_filter(struct et131x_adapter *adapter)
 		 */
 		if (filter & ET131X_PACKET_TYPE_ALL_MULTICAST) {
 			DBG_VERBOSE(et131x_dbginfo,
-				    "Multicast filtering OFF (Rx ALL MULTICAST)\n");
+			      "Multicast filtering OFF (Rx ALL MULTICAST)\n");
 			pf_ctrl.bits.filter_multi_en = 0;
 		} else {
-			DBG_VERBOSE(et131x_dbginfo, "Multicast filtering ON\n");
+			DBG_VERBOSE(et131x_dbginfo,
+				"Multicast filtering ON\n");
 			SetupDeviceForMulticast(adapter);
 			pf_ctrl.bits.filter_multi_en = 1;
 			ctrl.bits.pkt_filter_disable = 0;
@@ -505,9 +508,7 @@ void et131x_multicast(struct net_device *netdev)
 
 	if (netdev->mc_count > NIC_MAX_MCAST_LIST) {
 		DBG_WARNING(et131x_dbginfo,
-			    "ACCEPT ALL MULTICAST for now, as there's more Multicast "
-			    "addresses than the HW supports\n");
-
+			    "ACCEPT ALL MULTICAST for now, as there's more Multicast addresses than the HW supports\n");
 		adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
 	}
 
@@ -525,10 +526,10 @@ void et131x_multicast(struct net_device *netdev)
 	adapter->MCAddressCount = netdev->mc_count;
 
 	if (netdev->mc_count) {
-		if (mclist->dmi_addrlen != ETH_ALEN) {
+		if (mclist->dmi_addrlen != ETH_ALEN)
 			DBG_WARNING(et131x_dbginfo,
-				    "Multicast addrs are not ETH_ALEN in size\n");
-		} else {
+				"Multicast addrs are not ETH_ALEN in size\n");
+		else {
 			count = netdev->mc_count - 1;
 			memcpy(adapter->MCList[count], mclist->dmi_addr,
 			       ETH_ALEN);
@@ -662,15 +663,15 @@ void et131x_tx_timeout(struct net_device *netdev)
 					       lockflags);
 
 			DBG_WARNING(et131x_dbginfo,
-				    "Send stuck - reset.  pMpTcb->WrIndex %x, Flags 0x%08x\n",
-				    pMpTcb->WrIndex.bits.val,
-				    pMpTcb->Flags);
+				"Send stuck - reset.  pMpTcb->WrIndex %x, Flags 0x%08x\n",
+				pMpTcb->WrIndex.bits.val,
+				pMpTcb->Flags);
 
 			DBG_WARNING(et131x_dbginfo,
-				    "pDesc 0x%08x, 0x%08x, 0x%08x, 0x%08x\n",
-				    pDesc->DataBufferPtrHigh,
-				    pDesc->DataBufferPtrLow, pDesc->word2.value,
-				    pDesc->word3.value);
+				"pDesc 0x%08x, 0x%08x, 0x%08x, 0x%08x\n",
+				pDesc->DataBufferPtrHigh,
+				pDesc->DataBufferPtrLow, pDesc->word2.value,
+				pDesc->word3.value);
 
 			DBG_WARNING(et131x_dbginfo,
 				    "WbStatus 0x%08x\n", txDmaComplete.value);
@@ -737,7 +738,7 @@ int et131x_change_mtu(struct net_device *netdev, int new_mtu)
 	result = et131x_adapter_memory_alloc(adapter);
 	if (result != 0) {
 		DBG_WARNING(et131x_dbginfo,
-			    "Change MTU failed; couldn't re-alloc DMA memory\n");
+			"Change MTU failed; couldn't re-alloc DMA memory\n");
 		return result;
 	}
 
@@ -750,9 +751,8 @@ int et131x_change_mtu(struct net_device *netdev, int new_mtu)
 	et131x_adapter_setup(adapter);
 
 	/* Enable interrupts */
-	if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE)) {
+	if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE))
 		et131x_enable_interrupts(adapter);
-	}
 
 	/* Restart the Tx and Rx DMA engines */
 	et131x_rx_dma_enable(adapter);
@@ -781,8 +781,8 @@ int et131x_set_mac_addr(struct net_device *netdev, void *new_mac)
 	struct sockaddr *address = new_mac;
 
 	DBG_ENTER(et131x_dbginfo);
-	// begin blux
-	// DBG_VERBOSE( et131x_dbginfo, "Function not implemented!!\n" );
+	/* begin blux */
+	/* DBG_VERBOSE( et131x_dbginfo, "Function not implemented!!\n" ); */
 
 	if (adapter == NULL) {
 		DBG_LEAVE(et131x_dbginfo);
@@ -808,22 +808,24 @@ int et131x_set_mac_addr(struct net_device *netdev, void *new_mac)
 	et131x_handle_recv_interrupt(adapter);
 
 	/* Set the new MAC */
-	// netdev->set_mac_address  = &new_mac;
-	// netdev->mtu = new_mtu;
+	/* netdev->set_mac_address  = &new_mac; */
+	/* netdev->mtu = new_mtu; */
 
 	memcpy(netdev->dev_addr, address->sa_data, netdev->addr_len);
 
-	printk("%s: Setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n",
-	       netdev->name, netdev->dev_addr[0], netdev->dev_addr[1],
-	       netdev->dev_addr[2], netdev->dev_addr[3], netdev->dev_addr[4],
-	       netdev->dev_addr[5]);
+	printk(KERN_INFO
+		"%s: Setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n",
+			netdev->name,
+			netdev->dev_addr[0], netdev->dev_addr[1],
+			netdev->dev_addr[2], netdev->dev_addr[3],
+			netdev->dev_addr[4], netdev->dev_addr[5]);
 
 	/* Free Rx DMA memory */
 	et131x_adapter_memory_free(adapter);
 
 	/* Set the config parameter for Jumbo Packet support */
-	// adapter->RegistryJumboPacket = new_mtu + 14;
-	// blux: not needet here, w'll change the MAC
+	/* adapter->RegistryJumboPacket = new_mtu + 14; */
+	/* blux: not needet here, we'll change the MAC */
 
 	et131x_soft_reset(adapter);
 
@@ -831,23 +833,22 @@ int et131x_set_mac_addr(struct net_device *netdev, void *new_mac)
 	result = et131x_adapter_memory_alloc(adapter);
 	if (result != 0) {
 		DBG_WARNING(et131x_dbginfo,
-			    "Change MAC failed; couldn't re-alloc DMA memory\n");
+			"Change MAC failed; couldn't re-alloc DMA memory\n");
 		return result;
 	}
 
 	et131x_init_send(adapter);
 
 	et131x_setup_hardware_properties(adapter);
-	// memcpy( netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN );
-	// blux: no, do not override our nice address
+	/* memcpy( netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN ); */
+	/* blux: no, do not override our nice address */
 
 	/* Init the device with the new settings */
 	et131x_adapter_setup(adapter);
 
 	/* Enable interrupts */
-	if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE)) {
+	if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE))
 		et131x_enable_interrupts(adapter);
-	}
 
 	/* Restart the Tx and Rx DMA engines */
 	et131x_rx_dma_enable(adapter);