Staging: fbtft: Switch to the gpio descriptor interface

This switches the fbtft driver to use GPIO descriptors
rather than numerical gpios:

Utilize the GPIO library's intrinsic handling of OF GPIOs
and polarity. If the line is flagged active low, gpiolib
will deal with this.

Remove gpios from platform device structure. Neither assign
statically numbers to gpios in platform device nor allow
gpios to be parsed as module parameters.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 26 insertions, 26 deletions

diff --git a/drivers/staging/fbtft/fb_agm1264k-fl.c b/drivers/staging/fbtft/fb_agm1264k-fl.c
index f6f30f5bf15a..8f27bd8da17d 100644
--- a/drivers/staging/fbtft/fb_agm1264k-fl.c
+++ b/drivers/staging/fbtft/fb_agm1264k-fl.c
@@ -8,7 +8,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 
@@ -79,14 +79,14 @@ static int init_display(struct fbtft_par *par)
 
 static void reset(struct fbtft_par *par)
 {
-	if (par->gpio.reset == -1)
+	if (!par->gpio.reset)
 		return;
 
 	dev_dbg(par->info->device, "%s()\n", __func__);
 
-	gpio_set_value(par->gpio.reset, 0);
+	gpiod_set_value(par->gpio.reset, 0);
 	udelay(20);
-	gpio_set_value(par->gpio.reset, 1);
+	gpiod_set_value(par->gpio.reset, 1);
 	mdelay(120);
 }
 
@@ -98,30 +98,30 @@ static int verify_gpios(struct fbtft_par *par)
 	dev_dbg(par->info->device,
 		"%s()\n", __func__);
 
-	if (par->EPIN < 0) {
+	if (!par->EPIN) {
 		dev_err(par->info->device,
 			"Missing info about 'wr' (aka E) gpio. Aborting.\n");
 		return -EINVAL;
 	}
 	for (i = 0; i < 8; ++i) {
-		if (par->gpio.db[i] < 0) {
+		if (!par->gpio.db[i]) {
 			dev_err(par->info->device,
 				"Missing info about 'db[%i]' gpio. Aborting.\n",
 				i);
 			return -EINVAL;
 		}
 	}
-	if (par->CS0 < 0) {
+	if (!par->CS0) {
 		dev_err(par->info->device,
 			"Missing info about 'cs0' gpio. Aborting.\n");
 		return -EINVAL;
 	}
-	if (par->CS1 < 0) {
+	if (!par->CS1) {
 		dev_err(par->info->device,
 			"Missing info about 'cs1' gpio. Aborting.\n");
 		return -EINVAL;
 	}
-	if (par->RW < 0) {
+	if (!par->RW) {
 		dev_err(par->info->device,
 			"Missing info about 'rw' gpio. Aborting.\n");
 		return -EINVAL;
@@ -139,22 +139,22 @@ request_gpios_match(struct fbtft_par *par, const struct fbtft_gpio *gpio)
 	if (strcasecmp(gpio->name, "wr") == 0) {
 		/* left ks0108 E pin */
 		par->EPIN = gpio->gpio;
-		return GPIOF_OUT_INIT_LOW;
+		return GPIOD_OUT_LOW;
 	} else if (strcasecmp(gpio->name, "cs0") == 0) {
 		/* left ks0108 controller pin */
 		par->CS0 = gpio->gpio;
-		return GPIOF_OUT_INIT_HIGH;
+		return GPIOD_OUT_HIGH;
 	} else if (strcasecmp(gpio->name, "cs1") == 0) {
 		/* right ks0108 controller pin */
 		par->CS1 = gpio->gpio;
-		return GPIOF_OUT_INIT_HIGH;
+		return GPIOD_OUT_HIGH;
 	}
 
 	/* if write (rw = 0) e(1->0) perform write */
 	/* if read (rw = 1) e(0->1) set data on D0-7*/
 	else if (strcasecmp(gpio->name, "rw") == 0) {
 		par->RW = gpio->gpio;
-		return GPIOF_OUT_INIT_LOW;
+		return GPIOD_OUT_LOW;
 	}
 
 	return FBTFT_GPIO_NO_MATCH;
@@ -194,15 +194,15 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
 	/* select chip */
 	if (*buf) {
 		/* cs1 */
-		gpio_set_value(par->CS0, 1);
-		gpio_set_value(par->CS1, 0);
+		gpiod_set_value(par->CS0, 1);
+		gpiod_set_value(par->CS1, 0);
 	} else {
 		/* cs0 */
-		gpio_set_value(par->CS0, 0);
-		gpio_set_value(par->CS1, 1);
+		gpiod_set_value(par->CS0, 0);
+		gpiod_set_value(par->CS1, 1);
 	}
 
-	gpio_set_value(par->RS, 0); /* RS->0 (command mode) */
+	gpiod_set_value(par->RS, 0); /* RS->0 (command mode) */
 	len--;
 
 	if (len) {
@@ -364,7 +364,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 			write_reg(par, 0x00, (0x17 << 3) | (u8)y);
 
 			/* write bitmap */
-			gpio_set_value(par->RS, 1); /* RS->1 (data mode) */
+			gpiod_set_value(par->RS, 1); /* RS->1 (data mode) */
 			ret = par->fbtftops.write(par, buf, len);
 			if (ret < 0)
 				dev_err(par->info->device,
@@ -387,7 +387,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 			write_reg(par, 0x01, (0x17 << 3) | (u8)y);
 
 			/* write bitmap */
-			gpio_set_value(par->RS, 1); /* RS->1 (data mode) */
+			gpiod_set_value(par->RS, 1); /* RS->1 (data mode) */
 			par->fbtftops.write(par, buf, len);
 			if (ret < 0)
 				dev_err(par->info->device,
@@ -397,8 +397,8 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 	}
 	kfree(convert_buf);
 
-	gpio_set_value(par->CS0, 1);
-	gpio_set_value(par->CS1, 1);
+	gpiod_set_value(par->CS0, 1);
+	gpiod_set_value(par->CS1, 1);
 
 	return ret;
 }
@@ -408,7 +408,7 @@ static int write(struct fbtft_par *par, void *buf, size_t len)
 	fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
 			  "%s(len=%d): ", __func__, len);
 
-	gpio_set_value(par->RW, 0); /* set write mode */
+	gpiod_set_value(par->RW, 0); /* set write mode */
 
 	while (len--) {
 		u8 i, data;
@@ -417,12 +417,12 @@ static int write(struct fbtft_par *par, void *buf, size_t len)
 
 		/* set data bus */
 		for (i = 0; i < 8; ++i)
-			gpio_set_value(par->gpio.db[i], data & (1 << i));
+			gpiod_set_value(par->gpio.db[i], data & (1 << i));
 		/* set E */
-		gpio_set_value(par->EPIN, 1);
+		gpiod_set_value(par->EPIN, 1);
 		udelay(5);
 		/* unset E - write */
-		gpio_set_value(par->EPIN, 0);
+		gpiod_set_value(par->EPIN, 0);
 		udelay(1);
 	}