Merge tag 'staging-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver tree merge from Greg Kroah-Hartman:
 "Here's the big staging tree merge for 3.8-rc1

  There's a lot of patches in here, the majority being the comedi
  rework/cleanup that has been ongoing and is causing a huge reduction
  in overall code size, which is amazing to watch.  We also removed some
  older drivers (telephony and rts_pstor), and added a new one (fwserial
  which also came in through the tty tree due to tty api changes, take
  that one if you get merge conflicts.)

  The iio and ipack drivers are moving out of the staging area into
  their own part of the kernel as they have been cleaned up sufficiently
  and are working well.

  Overall, again a reduction of code:
   768 files changed, 31887 insertions(+), 82166 deletions(-)

  All of this has been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1298 commits)
  iio: imu: adis16480: remove duplicated include from adis16480.c
  iio: gyro: adis16136: remove duplicated include from adis16136.c
  iio:imu: adis16480: show_firmware() buffer too small
  iio:gyro: adis16136: divide by zero in write_frequency()
  iio: adc: Add Texas Instruments ADC081C021/027 support
  iio:ad7793: Add support for the ad7796 and ad7797
  iio:ad7793: Add support for the ad7798 and ad7799
  staging:iio: Move ad7793 driver out of staging
  staging:iio:ad7793: Implement stricter id checking
  staging:iio:ad7793: Move register definitions from header to source
  staging:iio:ad7793: Rework regulator handling
  staging:iio:ad7793: Rework platform data
  staging:iio:ad7793: Use kstrtol instead of strict_strtol
  staging:iio:ad7793: Use usleep_range instead of msleep
  staging:iio:ad7793: Fix temperature scale
  staging:iio:ad7793: Fix VDD monitor scale
  staging: gdm72xx: unlock on error in init_usb()
  staging: panel: pass correct lengths to keypad_send_key()
  staging: comedi: addi_apci_2032: fix interrupt support
  staging: comedi: addi_apci_2032: move i_APCI2032_ConfigDigitalOutput()
  ...

1 files changed, 7 insertions, 73 deletions

diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h
index 3f96ad3bbd66..acc688d7ea9e 100644
--- a/drivers/staging/iio/accel/adis16203.h
+++ b/drivers/staging/iio/accel/adis16203.h
@@ -3,9 +3,6 @@
 
 #define ADIS16203_STARTUP_DELAY	220 /* ms */
 
-#define ADIS16203_READ_REG(a)    a
-#define ADIS16203_WRITE_REG(a) ((a) | 0x80)
-
 #define ADIS16203_FLASH_CNT      0x00 /* Flash memory write count */
 #define ADIS16203_SUPPLY_OUT     0x02 /* Output, power supply */
 #define ADIS16203_AUX_ADC        0x08 /* Output, auxiliary ADC input */
@@ -27,8 +24,6 @@
 #define ADIS16203_DIAG_STAT      0x3C /* Diagnostics, system status register */
 #define ADIS16203_GLOB_CMD       0x3E /* Operation, system command register */
 
-#define ADIS16203_OUTPUTS        5
-
 /* MSC_CTRL */
 #define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST	(1 << 10) /* Self-test at power-on: 1 = disabled, 0 = enabled */
 #define ADIS16203_MSC_CTRL_REVERSE_ROT_EN	(1 << 9)  /* Reverses rotation of both inclination outputs */
@@ -40,86 +35,25 @@
 /* DIAG_STAT */
 #define ADIS16203_DIAG_STAT_ALARM2        (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
 #define ADIS16203_DIAG_STAT_ALARM1        (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16203_DIAG_STAT_SELFTEST_FAIL (1<<5) /* Self-test diagnostic error flag */
-#define ADIS16203_DIAG_STAT_SPI_FAIL	  (1<<3) /* SPI communications failure */
-#define ADIS16203_DIAG_STAT_FLASH_UPT	  (1<<2) /* Flash update failure */
-#define ADIS16203_DIAG_STAT_POWER_HIGH	  (1<<1) /* Power supply above 3.625 V */
-#define ADIS16203_DIAG_STAT_POWER_LOW	  (1<<0) /* Power supply below 3.15 V */
+#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag */
+#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT      3 /* SPI communications failure */
+#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT     2 /* Flash update failure */
+#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT    1 /* Power supply above 3.625 V */
+#define ADIS16203_DIAG_STAT_POWER_LOW_BIT     0 /* Power supply below 3.15 V */
 
 /* GLOB_CMD */
 #define ADIS16203_GLOB_CMD_SW_RESET	(1<<7)
 #define ADIS16203_GLOB_CMD_CLEAR_STAT	(1<<4)
 #define ADIS16203_GLOB_CMD_FACTORY_CAL	(1<<1)
 
-#define ADIS16203_MAX_TX 12
-#define ADIS16203_MAX_RX 10
-
 #define ADIS16203_ERROR_ACTIVE          (1<<14)
 
-/**
- * struct adis16203_state - device instance specific data
- * @us:			actual spi_device
- * @trig:		data ready trigger registered with iio
- * @tx:			transmit buffer
- * @rx:			receive buffer
- * @buf_lock:		mutex to protect tx and rx
- **/
-struct adis16203_state {
-	struct spi_device	*us;
-	struct iio_trigger	*trig;
-	struct mutex		buf_lock;
-	u8			tx[ADIS16203_MAX_TX] ____cacheline_aligned;
-	u8			rx[ADIS16203_MAX_RX];
-};
-
-int adis16203_set_irq(struct iio_dev *indio_dev, bool enable);
-
 enum adis16203_scan {
+	ADIS16203_SCAN_INCLI_X,
+	ADIS16203_SCAN_INCLI_Y,
 	ADIS16203_SCAN_SUPPLY,
 	ADIS16203_SCAN_AUX_ADC,
 	ADIS16203_SCAN_TEMP,
-	ADIS16203_SCAN_INCLI_X,
-	ADIS16203_SCAN_INCLI_Y,
 };
 
-#ifdef CONFIG_IIO_BUFFER
-void adis16203_remove_trigger(struct iio_dev *indio_dev);
-int adis16203_probe_trigger(struct iio_dev *indio_dev);
-
-ssize_t adis16203_read_data_from_ring(struct device *dev,
-				      struct device_attribute *attr,
-				      char *buf);
-
-int adis16203_configure_ring(struct iio_dev *indio_dev);
-void adis16203_unconfigure_ring(struct iio_dev *indio_dev);
-
-#else /* CONFIG_IIO_BUFFER */
-
-static inline void adis16203_remove_trigger(struct iio_dev *indio_dev)
-{
-}
-
-static inline int adis16203_probe_trigger(struct iio_dev *indio_dev)
-{
-	return 0;
-}
-
-static inline ssize_t
-adis16203_read_data_from_ring(struct device *dev,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	return 0;
-}
-
-static int adis16203_configure_ring(struct iio_dev *indio_dev)
-{
-	return 0;
-}
-
-static inline void adis16203_unconfigure_ring(struct iio_dev *indio_dev)
-{
-}
-
-#endif /* CONFIG_IIO_BUFFER */
 #endif /* SPI_ADIS16203_H_ */