staging/atomisp: Add support for the Intel IPU v2

This patch adds support for the Intel IPU v2 as found on Android and IoT
Baytrail-T and Baytrail-CR platforms (those with the IPU PCI mapped). You
will also need the firmware files from your device (Android usually puts
them into /etc) - or you can find them in the downloadable restore/upgrade
kits if you blew them away for some reason.

It may be possible to extend the driver to handle the BYT/T windows
platforms such as the ASUS T100TA. These platforms don't expose the IPU via
the PCI interface but via ACPI buried in the GPU description and with the
camera information somewhere unknown so would need a platform driver
interface adding to the codebase *IFF* the firmware works on such devices.

To get good results you also need a suitable support library such as
libxcam. The camera is intended to be driven from Android so it has a lot of
features that many desktop apps don't fully spport.

In theory all the pieces are there to build it with -DISP2401 and some
differing files to get CherryTrail/T support, but unifying the drivers
properlly is a work in progress.

The IPU driver represents the work of a lot of people within Intel over many
years. It's historical goal was portability rather than Linux upstream. Any
queries about the upstream aimed driver should be sent to me not to the
original authors.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 108 insertions, 0 deletions

diff --git a/drivers/staging/media/atomisp/pci/atomisp2/css2400/css_2401_csi2p_system/host/isys_irq_private.h b/drivers/staging/media/atomisp/pci/atomisp2/css2400/css_2401_csi2p_system/host/isys_irq_private.h
new file mode 100644
index 000000000000..c17ce131c9e1
--- /dev/null
+++ b/drivers/staging/media/atomisp/pci/atomisp2/css2400/css_2401_csi2p_system/host/isys_irq_private.h
@@ -0,0 +1,108 @@
+/*
+ * Support for Intel Camera Imaging ISP subsystem.
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __ISYS_IRQ_PRIVATE_H__
+#define __ISYS_IRQ_PRIVATE_H__
+
+#include "isys_irq_global.h"
+#include "isys_irq_local.h"
+
+#if defined(USE_INPUT_SYSTEM_VERSION_2401)
+
+/* -------------------------------------------------------+
+ |             Native command interface (NCI)             |
+ + -------------------------------------------------------*/
+
+/**
+* @brief Get the isys irq status.
+* Refer to "isys_irq.h" for details.
+*/
+STORAGE_CLASS_ISYS2401_IRQ_C void isys_irqc_state_get(
+	const isys_irq_ID_t	isys_irqc_id,
+	isys_irqc_state_t *state)
+{
+	state->edge     = isys_irqc_reg_load(isys_irqc_id, ISYS_IRQ_EDGE_REG_IDX);
+	state->mask     = isys_irqc_reg_load(isys_irqc_id, ISYS_IRQ_MASK_REG_IDX);
+	state->status   = isys_irqc_reg_load(isys_irqc_id, ISYS_IRQ_STATUS_REG_IDX);
+	state->enable   = isys_irqc_reg_load(isys_irqc_id, ISYS_IRQ_ENABLE_REG_IDX);
+	state->level_no = isys_irqc_reg_load(isys_irqc_id, ISYS_IRQ_LEVEL_NO_REG_IDX);
+	/*
+	** Invalid to read/load from write-only register 'clear'
+	** state->clear = isys_irqc_reg_load(isys_irqc_id, ISYS_IRQ_CLEAR_REG_IDX);
+	*/
+}
+
+/**
+* @brief Dump the isys irq status.
+* Refer to "isys_irq.h" for details.
+*/
+STORAGE_CLASS_ISYS2401_IRQ_C void isys_irqc_state_dump(
+	const isys_irq_ID_t	isys_irqc_id,
+	const isys_irqc_state_t *state)
+{
+	ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
+		"isys irq controller id %d"
+		"\n\tstatus:0x%x\n\tedge:0x%x\n\tmask:0x%x"
+		"\n\tenable:0x%x\n\tlevel_not_pulse:0x%x\n",
+		isys_irqc_id,
+		state->status, state->edge, state->mask, state->enable, state->level_no);
+}
+
+/** end of NCI */
+
+/* -------------------------------------------------------+
+ |              Device level interface (DLI)              |
+ + -------------------------------------------------------*/
+
+/* Support functions */
+STORAGE_CLASS_ISYS2401_IRQ_C void isys_irqc_reg_store(
+	const isys_irq_ID_t	isys_irqc_id,
+	const unsigned int	reg_idx,
+	const hrt_data	value)
+{
+	unsigned int reg_addr;
+
+	assert(isys_irqc_id < N_ISYS_IRQ_ID);
+	assert(reg_idx <= ISYS_IRQ_LEVEL_NO_REG_IDX);
+
+	reg_addr = ISYS_IRQ_BASE[isys_irqc_id] + (reg_idx * sizeof(hrt_data));
+	ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
+		"isys irq store at addr(0x%x) val(%u)\n", reg_addr, (unsigned int)value);
+
+	ia_css_device_store_uint32(reg_addr, value);
+}
+
+STORAGE_CLASS_ISYS2401_IRQ_C hrt_data isys_irqc_reg_load(
+	const isys_irq_ID_t	isys_irqc_id,
+	const unsigned int	reg_idx)
+{
+	unsigned int reg_addr;
+	hrt_data value;
+
+	assert(isys_irqc_id < N_ISYS_IRQ_ID);
+	assert(reg_idx <= ISYS_IRQ_LEVEL_NO_REG_IDX);
+
+	reg_addr = ISYS_IRQ_BASE[isys_irqc_id] + (reg_idx * sizeof(hrt_data));
+	value = ia_css_device_load_uint32(reg_addr);
+	ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
+		"isys irq load from addr(0x%x) val(%u)\n", reg_addr, (unsigned int)value);
+
+	return value;
+}
+
+/** end of DLI */
+
+#endif /* defined(USE_INPUT_SYSTEM_VERSION_2401) */
+
+#endif	/* __ISYS_IRQ_PRIVATE_H__ */