Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

The UDP reuseport conflict was a little bit tricky.

The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.

At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.

This requires moving the reuseport_has_conns() logic into the callers.

While we are here, get rid of inline directives as they do not belong
in foo.c files.

The other changes were cases of more straightforward overlapping
modifications.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 179 insertions, 0 deletions

diff --git a/drivers/staging/media/atomisp/pci/system_local.c b/drivers/staging/media/atomisp/pci/system_local.c
new file mode 100644
index 000000000000..4ca8569d7feb
--- /dev/null
+++ b/drivers/staging/media/atomisp/pci/system_local.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for Intel Camera Imaging ISP subsystem.
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include "system_local.h"
+
+/* ISP */
+const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
+	0x0000000000020000ULL
+};
+
+const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
+	0x0000000000200000ULL
+};
+
+const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
+	0x0000000000100000ULL
+};
+
+/* SP */
+const hrt_address SP_CTRL_BASE[N_SP_ID] = {
+	0x0000000000010000ULL
+};
+
+const hrt_address SP_DMEM_BASE[N_SP_ID] = {
+	0x0000000000300000ULL
+};
+
+/* MMU */
+/*
+ * MMU0_ID: The data MMU
+ * MMU1_ID: The icache MMU
+ */
+const hrt_address MMU_BASE[N_MMU_ID] = {
+	0x0000000000070000ULL,
+	0x00000000000A0000ULL
+};
+
+/* DMA */
+const hrt_address DMA_BASE[N_DMA_ID] = {
+	0x0000000000040000ULL
+};
+
+const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
+	0x00000000000CA000ULL
+};
+
+/* IRQ */
+const hrt_address IRQ_BASE[N_IRQ_ID] = {
+	0x0000000000000500ULL,
+	0x0000000000030A00ULL,
+	0x000000000008C000ULL,
+	0x0000000000090200ULL
+};
+
+/*
+	0x0000000000000500ULL};
+ */
+
+/* GDC */
+const hrt_address GDC_BASE[N_GDC_ID] = {
+	0x0000000000050000ULL,
+	0x0000000000060000ULL
+};
+
+/* FIFO_MONITOR (not a subset of GP_DEVICE) */
+const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
+	0x0000000000000000ULL
+};
+
+/*
+const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = {
+	0x0000000000000000ULL};
+
+const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
+	0x0000000000090000ULL};
+*/
+
+/* GP_DEVICE (single base for all separate GP_REG instances) */
+const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
+	0x0000000000000000ULL
+};
+
+/*GP TIMER , all timer registers are inter-twined,
+ * so, having multiple base addresses for
+ * different timers does not help*/
+const hrt_address GP_TIMER_BASE =
+    (hrt_address)0x0000000000000600ULL;
+
+/* GPIO */
+const hrt_address GPIO_BASE[N_GPIO_ID] = {
+	0x0000000000000400ULL
+};
+
+/* TIMED_CTRL */
+const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
+	0x0000000000000100ULL
+};
+
+/* INPUT_FORMATTER */
+const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
+	0x0000000000030000ULL,
+	0x0000000000030200ULL,
+	0x0000000000030400ULL,
+	0x0000000000030600ULL
+}; /* memcpy() */
+
+/* INPUT_SYSTEM */
+const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
+	0x0000000000080000ULL
+};
+
+/*	0x0000000000081000ULL, */ /* capture A */
+/*	0x0000000000082000ULL, */ /* capture B */
+/*	0x0000000000083000ULL, */ /* capture C */
+/*	0x0000000000084000ULL, */ /* Acquisition */
+/*	0x0000000000085000ULL, */ /* DMA */
+/*	0x0000000000089000ULL, */ /* ctrl */
+/*	0x000000000008A000ULL, */ /* GP regs */
+/*	0x000000000008B000ULL, */ /* FIFO */
+/*	0x000000000008C000ULL, */ /* IRQ */
+
+/* RX, the MIPI lane control regs start at offset 0 */
+const hrt_address RX_BASE[N_RX_ID] = {
+	0x0000000000080100ULL
+};
+
+/* IBUF_CTRL, part of the Input System 2401 */
+const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
+	0x00000000000C1800ULL,	/* ibuf controller A */
+	0x00000000000C3800ULL,	/* ibuf controller B */
+	0x00000000000C5800ULL	/* ibuf controller C */
+};
+
+/* ISYS IRQ Controllers, part of the Input System 2401 */
+const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
+	0x00000000000C1400ULL,	/* port a */
+	0x00000000000C3400ULL,	/* port b */
+	0x00000000000C5400ULL	/* port c */
+};
+
+/* CSI FE, part of the Input System 2401 */
+const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
+	0x00000000000C0400ULL,	/* csi fe controller A */
+	0x00000000000C2400ULL,	/* csi fe controller B */
+	0x00000000000C4400ULL	/* csi fe controller C */
+};
+
+/* CSI BE, part of the Input System 2401 */
+const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
+	0x00000000000C0800ULL,	/* csi be controller A */
+	0x00000000000C2800ULL,	/* csi be controller B */
+	0x00000000000C4800ULL	/* csi be controller C */
+};
+
+/* PIXEL Generator, part of the Input System 2401 */
+const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
+	0x00000000000C1000ULL,	/* pixel gen controller A */
+	0x00000000000C3000ULL,	/* pixel gen controller B */
+	0x00000000000C5000ULL	/* pixel gen controller C */
+};
+
+/* Stream2MMIO, part of the Input System 2401 */
+const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
+	0x00000000000C0C00ULL,	/* stream2mmio controller A */
+	0x00000000000C2C00ULL,	/* stream2mmio controller B */
+	0x00000000000C4C00ULL	/* stream2mmio controller C */
+};