staging: rename omap-thermal driver to ti-soc-thermal

Because this driver will support also OMAP derivatives,
this patch does a big rename inside this driver, so it
better fits its usage.

This patch only renames the directory, file names,
includes, Makefiles and Kconfig includes.

Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 386 deletions

diff --git a/drivers/staging/omap-thermal/omap-bandgap.h b/drivers/staging/omap-thermal/omap-bandgap.h
deleted file mode 100644
index ad83be8ce7e6..000000000000
--- a/drivers/staging/omap-thermal/omap-bandgap.h
+++ /dev/null
@@ -1,386 +0,0 @@
-/*
- * OMAP4 Bandgap temperature sensor driver
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- * Contact:
- *   Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-#ifndef __OMAP_BANDGAP_H
-#define __OMAP_BANDGAP_H
-
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#include <linux/err.h>
-
-/**
- * DOC: bandgap driver data structure
- * ==================================
- *   +---------------------+   +-----------------+
- *   | struct omap_bandgap |-->| struct device * |
- *   +----------+----------+   +-----------------+
- *              |
- *              |
- *              V
- *   +--------------------------+
- *   | struct omap_bandgap_data |
- *   +--------------------------+
- *              |
- *              |
- *              * (Array of)
- * +------------+------------------------------------------------------+
- * | +----------+--------------+   +-------------------------+         |
- * | | struct omap_temp_sensor |-->| struct temp_sensor_data |         |
- * | +-------------------------+   +------------+------------+         |
- * |            |                                                      |
- * |            +--------------------------+                           |
- * |            V                          V                           |
- * | +----------+- --------------+  +----+-------------------------+   |
- * | | struct temp_sensor_regval |  | struct temp_sensor_registers |   |
- * | +---------------------------+  +------------------------------+   |
- * |                                                                   |
- * +-------------------------------------------------------------------+
- *
- * Above is a simple diagram describing how the data structure below
- * are organized. For each bandgap device there should be a omap_bandgap_data
- * containing the device instance configuration, as well as, an array of
- * sensors, representing every sensor instance present in this bandgap.
- */
-
-/**
- * struct temp_sensor_registers - descriptor to access registers and bitfields
- * @temp_sensor_ctrl: TEMP_SENSOR_CTRL register offset
- * @bgap_tempsoff_mask: mask to temp_sensor_ctrl.tempsoff
- * @bgap_soc_mask: mask to temp_sensor_ctrl.soc
- * @bgap_eocz_mask: mask to temp_sensor_ctrl.eocz
- * @bgap_dtemp_mask: mask to temp_sensor_ctrl.dtemp
- * @bgap_mask_ctrl: BANDGAP_MASK_CTRL register offset
- * @mask_hot_mask: mask to bandgap_mask_ctrl.mask_hot
- * @mask_cold_mask: mask to bandgap_mask_ctrl.mask_cold
- * @mask_sidlemode_mask: mask to bandgap_mask_ctrl.mask_sidlemode
- * @mask_freeze_mask: mask to bandgap_mask_ctrl.mask_free
- * @mask_clear_mask: mask to bandgap_mask_ctrl.mask_clear
- * @mask_clear_accum_mask: mask to bandgap_mask_ctrl.mask_clear_accum
- * @bgap_mode_ctrl: BANDGAP_MODE_CTRL register offset
- * @mode_ctrl_mask: mask to bandgap_mode_ctrl.mode_ctrl
- * @bgap_counter: BANDGAP_COUNTER register offset
- * @counter_mask: mask to bandgap_counter.counter
- * @bgap_threshold: BANDGAP_THRESHOLD register offset (TALERT thresholds)
- * @threshold_thot_mask: mask to bandgap_threhold.thot
- * @threshold_tcold_mask: mask to bandgap_threhold.tcold
- * @tshut_threshold: TSHUT_THRESHOLD register offset (TSHUT thresholds)
- * @tshut_efuse_mask: mask to tshut_threshold.tshut_efuse
- * @tshut_efuse_shift: shift to tshut_threshold.tshut_efuse
- * @tshut_hot_mask: mask to tshut_threhold.thot
- * @tshut_cold_mask: mask to tshut_threhold.thot
- * @bgap_status: BANDGAP_STATUS register offset
- * @status_clean_stop_mask: mask to bandgap_status.clean_stop
- * @status_bgap_alert_mask: mask to bandgap_status.bandgap_alert
- * @status_hot_mask: mask to bandgap_status.hot
- * @status_cold_mask: mask to bandgap_status.cold
- * @bgap_cumul_dtemp: BANDGAP_CUMUL_DTEMP register offset
- * @ctrl_dtemp_0: CTRL_DTEMP0 register offset
- * @ctrl_dtemp_1: CTRL_DTEMP1 register offset
- * @ctrl_dtemp_2: CTRL_DTEMP2 register offset
- * @ctrl_dtemp_3: CTRL_DTEMP3 register offset
- * @ctrl_dtemp_4: CTRL_DTEMP4 register offset
- * @bgap_efuse: BANDGAP_EFUSE register offset
- *
- * The register offsets and bitfields might change across
- * OMAP and variants versions. Hence this struct serves as a
- * descriptor map on how to access the registers and the bitfields.
- *
- * This descriptor contains registers of all versions of bandgap chips.
- * Not all versions will use all registers, depending on the available
- * features. Please read TRMs for descriptive explanation on each bitfield.
- */
-
-struct temp_sensor_registers {
-	u32	temp_sensor_ctrl;
-	u32	bgap_tempsoff_mask;
-	u32	bgap_soc_mask;
-	u32	bgap_eocz_mask; /* not used: but needs revisit */
-	u32	bgap_dtemp_mask;
-
-	u32	bgap_mask_ctrl;
-	u32	mask_hot_mask;
-	u32	mask_cold_mask;
-	u32	mask_sidlemode_mask; /* not used: but may be needed for pm */
-	u32	mask_freeze_mask;
-	u32	mask_clear_mask; /* not used: but needed for trending */
-	u32	mask_clear_accum_mask; /* not used: but needed for trending */
-
-	u32	bgap_mode_ctrl;
-	u32	mode_ctrl_mask;
-
-	u32	bgap_counter;
-	u32	counter_mask;
-
-	u32	bgap_threshold;
-	u32	threshold_thot_mask;
-	u32	threshold_tcold_mask;
-
-	u32	tshut_threshold;
-	u32	tshut_efuse_mask; /* not used */
-	u32	tshut_efuse_shift; /* not used */
-	u32	tshut_hot_mask;
-	u32	tshut_cold_mask;
-
-	u32	bgap_status;
-	u32	status_clean_stop_mask; /* not used: but needed for trending */
-	u32	status_bgap_alert_mask; /* not used */
-	u32	status_hot_mask;
-	u32	status_cold_mask;
-
-	u32	bgap_cumul_dtemp; /* not used: but needed for trending */
-	u32	ctrl_dtemp_0; /* not used: but needed for trending */
-	u32	ctrl_dtemp_1; /* not used: but needed for trending */
-	u32	ctrl_dtemp_2; /* not used: but needed for trending */
-	u32	ctrl_dtemp_3; /* not used: but needed for trending */
-	u32	ctrl_dtemp_4; /* not used: but needed for trending */
-	u32	bgap_efuse;
-};
-
-/**
- * struct temp_sensor_data - The thresholds and limits for temperature sensors.
- * @tshut_hot: temperature to trigger a thermal reset (initial value)
- * @tshut_cold: temp to get the plat out of reset due to thermal (init val)
- * @t_hot: temperature to trigger a thermal alert (high initial value)
- * @t_cold: temperature to trigger a thermal alert (low initial value)
- * @min_freq: sensor minimum clock rate
- * @max_freq: sensor maximum clock rate
- * @max_temp: sensor maximum temperature
- * @min_temp: sensor minimum temperature
- * @hyst_val: temperature hysteresis considered while converting ADC values
- * @update_int1: update interval
- * @update_int2: update interval
- *
- * This data structure will hold the required thresholds and temperature limits
- * for a specific temperature sensor, like shutdown temperature, alert
- * temperature, clock / rate used, ADC conversion limits and update intervals
- */
-struct temp_sensor_data {
-	u32	tshut_hot;
-	u32	tshut_cold;
-	u32	t_hot;
-	u32	t_cold;
-	u32	min_freq;
-	u32	max_freq;
-	int     max_temp;
-	int     min_temp;
-	int     hyst_val;
-	u32     update_int1; /* not used */
-	u32     update_int2; /* not used */
-};
-
-struct omap_bandgap_data;
-
-/**
- * struct omap_bandgap - bandgap device structure
- * @dev: struct device pointer
- * @base: io memory base address
- * @conf: struct with bandgap configuration set (# sensors, conv_table, etc)
- * @fclock: pointer to functional clock of temperature sensor
- * @div_clk: pointer to divider clock of temperature sensor fclk
- * @bg_mutex: mutex for omap_bandgap structure
- * @irq: MPU IRQ number for thermal alert
- * @tshut_gpio: GPIO where Tshut signal is routed
- * @clk_rate: Holds current clock rate
- *
- * The bandgap device structure representing the bandgap device instance.
- * It holds most of the dynamic stuff. Configurations and sensor specific
- * entries are inside the @conf structure.
- */
-struct omap_bandgap {
-	struct device			*dev;
-	void __iomem			*base;
-	struct omap_bandgap_data	*conf;
-	struct clk			*fclock;
-	struct clk			*div_clk;
-	spinlock_t			lock; /* shields this struct */
-	int				irq;
-	int				tshut_gpio;
-	u32				clk_rate;
-};
-
-/**
- * struct temp_sensor_regval - temperature sensor register values
- * @bg_mode_ctrl: temp sensor control register value
- * @bg_ctrl: bandgap ctrl register value
- * @bg_counter: bandgap counter value
- * @bg_threshold: bandgap threshold register value
- * @tshut_threshold: bandgap tshut register value
- *
- * Data structure to save and restore bandgap register set context. Only
- * required registers are shadowed, when needed.
- */
-struct temp_sensor_regval {
-	u32			bg_mode_ctrl;
-	u32			bg_ctrl;
-	u32			bg_counter;
-	u32			bg_threshold;
-	u32			tshut_threshold;
-};
-
-/**
- * struct omap_temp_sensor - bandgap temperature sensor configuration data
- * @ts_data: pointer to struct with thresholds, limits of temperature sensor
- * @registers: pointer to the list of register offsets and bitfields
- * @regval: temperature sensor register values
- * @domain: the name of the domain where the sensor is located
- * @slope: sensor gradient slope info for hotspot extrapolation equation
- * @const: sensor gradient const info for hotspot extrapolation equation
- * @slope_pcb: sensor gradient slope info for hotspot extrapolation equation
- *             with no external influence
- * @constant_pcb: sensor gradient const info for hotspot extrapolation equation
- *             with no external influence
- * @data: private data
- * @register_cooling: function to describe how this sensor is going to be cooled
- * @unregister_cooling: function to release cooling data
- *
- * Data structure to describe a temperature sensor handled by a bandgap device.
- * It should provide configuration details on this sensor, such as how to
- * access the registers affecting this sensor, shadow register buffer, how to
- * assess the gradient from hotspot, how to cooldown the domain when sensor
- * reports too hot temperature.
- */
-struct omap_temp_sensor {
-	struct temp_sensor_data		*ts_data;
-	struct temp_sensor_registers	*registers;
-	struct temp_sensor_regval	regval;
-	char				*domain;
-	/* for hotspot extrapolation */
-	const int			slope;
-	const int			constant;
-	const int			slope_pcb;
-	const int			constant_pcb;
-	void				*data;
-	int (*register_cooling)(struct omap_bandgap *bgp, int id);
-	int (*unregister_cooling)(struct omap_bandgap *bgp, int id);
-};
-
-/**
- * DOC: omap bandgap feature types
- *
- * OMAP_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output
- *      of a bandgap device instance is routed to the processor. This means
- *      the system must react and perform the shutdown by itself (handle an
- *      IRQ, for instance).
- *
- * OMAP_BANDGAP_FEATURE_TSHUT_CONFIG - used when the bandgap device has control
- *      over the thermal shutdown configuration. This means that the thermal
- *      shutdown thresholds are programmable, for instance.
- *
- * OMAP_BANDGAP_FEATURE_TALERT - used when the bandgap device instance outputs
- *      a signal representing violation of programmable alert thresholds.
- *
- * OMAP_BANDGAP_FEATURE_MODE_CONFIG - used when it is possible to choose which
- *      mode, continuous or one shot, the bandgap device instance will operate.
- *
- * OMAP_BANDGAP_FEATURE_COUNTER - used when the bandgap device instance allows
- *      programming the update interval of its internal state machine.
- *
- * OMAP_BANDGAP_FEATURE_POWER_SWITCH - used when the bandgap device allows
- *      itself to be switched on/off.
- *
- * OMAP_BANDGAP_FEATURE_CLK_CTRL - used when the clocks feeding the bandgap
- *      device are gateable or not.
- *
- * OMAP_BANDGAP_FEATURE_FREEZE_BIT - used when the bandgap device features
- *      a history buffer that its update can be freezed/unfreezed.
- *
- * OMAP_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
- *      specific feature (above) or not. Return non-zero, if yes.
- */
-#define OMAP_BANDGAP_FEATURE_TSHUT		BIT(0)
-#define OMAP_BANDGAP_FEATURE_TSHUT_CONFIG	BIT(1)
-#define OMAP_BANDGAP_FEATURE_TALERT		BIT(2)
-#define OMAP_BANDGAP_FEATURE_MODE_CONFIG	BIT(3)
-#define OMAP_BANDGAP_FEATURE_COUNTER		BIT(4)
-#define OMAP_BANDGAP_FEATURE_POWER_SWITCH	BIT(5)
-#define OMAP_BANDGAP_FEATURE_CLK_CTRL		BIT(6)
-#define OMAP_BANDGAP_FEATURE_FREEZE_BIT		BIT(7)
-#define OMAP_BANDGAP_HAS(b, f)			\
-			((b)->conf->features & OMAP_BANDGAP_FEATURE_ ## f)
-
-/**
- * struct omap_bandgap_data - omap bandgap data configuration structure
- * @features: a bitwise flag set to describe the device features
- * @conv_table: Pointer to ADC to temperature conversion table
- * @adc_start_val: ADC conversion table starting value
- * @adc_end_val: ADC conversion table ending value
- * @fclock_name: clock name of the functional clock
- * @div_ck_name: clock name of the clock divisor
- * @sensor_count: count of temperature sensor within this bandgap device
- * @report_temperature: callback to report thermal alert to thermal API
- * @expose_sensor: callback to export sensor to thermal API
- * @remove_sensor: callback to destroy sensor from thermal API
- * @sensors: array of sensors present in this bandgap instance
- *
- * This is a data structure which should hold most of the static configuration
- * of a bandgap device instance. It should describe which features this instance
- * is capable of, the clock names to feed this device, the amount of sensors and
- * their configuration representation, and how to export and unexport them to
- * a thermal API.
- */
-struct omap_bandgap_data {
-	unsigned int			features;
-	const int			*conv_table;
-	u32				adc_start_val;
-	u32				adc_end_val;
-	char				*fclock_name;
-	char				*div_ck_name;
-	int				sensor_count;
-	int (*report_temperature)(struct omap_bandgap *bgp, int id);
-	int (*expose_sensor)(struct omap_bandgap *bgp, int id, char *domain);
-	int (*remove_sensor)(struct omap_bandgap *bgp, int id);
-
-	/* this needs to be at the end */
-	struct omap_temp_sensor		sensors[];
-};
-
-int omap_bandgap_read_thot(struct omap_bandgap *bgp, int id, int *thot);
-int omap_bandgap_write_thot(struct omap_bandgap *bgp, int id, int val);
-int omap_bandgap_read_tcold(struct omap_bandgap *bgp, int id, int *tcold);
-int omap_bandgap_write_tcold(struct omap_bandgap *bgp, int id, int val);
-int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id,
-				      int *interval);
-int omap_bandgap_write_update_interval(struct omap_bandgap *bgp, int id,
-				       u32 interval);
-int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
-				  int *temperature);
-int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id,
-				 void *data);
-void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id);
-
-#ifdef CONFIG_OMAP4_THERMAL
-extern const struct omap_bandgap_data omap4430_data;
-extern const struct omap_bandgap_data omap4460_data;
-extern const struct omap_bandgap_data omap4470_data;
-#else
-#define omap4430_data					NULL
-#define omap4460_data					NULL
-#define omap4470_data					NULL
-#endif
-
-#ifdef CONFIG_OMAP5_THERMAL
-extern const struct omap_bandgap_data omap5430_data;
-#else
-#define omap5430_data					NULL
-#endif
-
-#endif