staging: rtl8188eu: remove rtl8188eu driver from staging dir

This driver was deprecated with the introduction of the r8188eu driver,
based upon Realtek sources that were modified for CFG80211 support and
other fixes on GitHub by Larry Finger. As that driver is now progressing
at pace, we should remove this one.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731133809.196681-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 591 deletions

diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
deleted file mode 100644
index f2969e160ac3..000000000000
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
+++ /dev/null
@@ -1,591 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-#define _RTL8188E_CMD_C_
-
-#include <osdep_service.h>
-#include <drv_types.h>
-#include <recv_osdep.h>
-#include <mlme_osdep.h>
-#include <rtw_ioctl_set.h>
-
-#include <rtl8188e_hal.h>
-
-#define RTL88E_MAX_H2C_BOX_NUMS		4
-#define RTL88E_MAX_CMD_LEN		7
-#define RTL88E_MESSAGE_BOX_SIZE		4
-#define RTL88E_EX_MESSAGE_BOX_SIZE	4
-
-static u8 _is_fw_read_cmd_down(struct adapter *adapt, u8 msgbox_num)
-{
-	u8 read_down = false;
-	int retry_cnts = 100;
-
-	u8 valid;
-
-	do {
-		valid = usb_read8(adapt, REG_HMETFR) & BIT(msgbox_num);
-		if (valid == 0)
-			read_down = true;
-	} while ((!read_down) && (retry_cnts--));
-
-	return read_down;
-}
-
-/*****************************************
-* H2C Msg format :
-* 0x1DF - 0x1D0
-*| 31 - 8	| 7-5	 4 - 0	|
-*| h2c_msg	|Class_ID CMD_ID	|
-*
-* Extend 0x1FF - 0x1F0
-*|31 - 0	  |
-*|ext_msg|
-******************************************/
-static s32 FillH2CCmd_88E(struct adapter *adapt, u8 ElementID, u32 CmdLen, u8 *pCmdBuffer)
-{
-	u8 h2c_box_num;
-	u32 msgbox_addr;
-	u32 msgbox_ex_addr;
-	u8 cmd_idx, ext_cmd_len;
-	u32 h2c_cmd = 0;
-	u32 h2c_cmd_ex = 0;
-	s32 ret = _FAIL;
-
-	if (!adapt->bFWReady)
-		return ret;
-
-	if (!pCmdBuffer)
-		goto exit;
-	if (CmdLen > RTL88E_MAX_CMD_LEN)
-		goto exit;
-	if (adapt->bSurpriseRemoved)
-		goto exit;
-
-	/* pay attention to if  race condition happened in  H2C cmd setting. */
-	h2c_box_num = adapt->HalData->LastHMEBoxNum;
-
-	if (!_is_fw_read_cmd_down(adapt, h2c_box_num))
-		goto exit;
-
-	*(u8 *)(&h2c_cmd) = ElementID;
-
-	if (CmdLen <= 3) {
-		memcpy((u8 *)(&h2c_cmd) + 1, pCmdBuffer, CmdLen);
-	} else {
-		memcpy((u8 *)(&h2c_cmd) + 1, pCmdBuffer, 3);
-		ext_cmd_len = CmdLen - 3;
-		memcpy((u8 *)(&h2c_cmd_ex), pCmdBuffer + 3, ext_cmd_len);
-
-		/* Write Ext command */
-		msgbox_ex_addr = REG_HMEBOX_EXT_0 + (h2c_box_num * RTL88E_EX_MESSAGE_BOX_SIZE);
-		for (cmd_idx = 0; cmd_idx < ext_cmd_len; cmd_idx++)
-			usb_write8(adapt, msgbox_ex_addr + cmd_idx, *((u8 *)(&h2c_cmd_ex) + cmd_idx));
-	}
-	/*  Write command */
-	msgbox_addr = REG_HMEBOX_0 + (h2c_box_num * RTL88E_MESSAGE_BOX_SIZE);
-	for (cmd_idx = 0; cmd_idx < RTL88E_MESSAGE_BOX_SIZE; cmd_idx++)
-		usb_write8(adapt, msgbox_addr + cmd_idx, *((u8 *)(&h2c_cmd) + cmd_idx));
-
-	adapt->HalData->LastHMEBoxNum =
-		(h2c_box_num + 1) % RTL88E_MAX_H2C_BOX_NUMS;
-
-	ret = _SUCCESS;
-
-exit:
-	return ret;
-}
-
-/* bitmap[0:27] = tx_rate_bitmap */
-/* bitmap[28:31]= Rate Adaptive id */
-/* arg[0:4] = macid */
-/* arg[5] = Short GI */
-void rtw_hal_add_ra_tid(struct adapter *pAdapter, u32 bitmap, u8 arg, u8 rssi_level)
-{
-	struct odm_dm_struct *odmpriv = &pAdapter->HalData->odmpriv;
-	u8 macid, init_rate, raid, shortGIrate = false;
-
-	macid = arg & 0x1f;
-
-	raid = (bitmap >> 28) & 0x0f;
-	bitmap &= 0x0fffffff;
-
-	if (rssi_level != DM_RATR_STA_INIT)
-		bitmap = ODM_Get_Rate_Bitmap(odmpriv, macid, bitmap, rssi_level);
-
-	bitmap |= ((raid << 28) & 0xf0000000);
-
-	init_rate = get_highest_rate_idx(bitmap & 0x0fffffff) & 0x3f;
-
-	shortGIrate = (arg & BIT(5)) ? true : false;
-
-	if (shortGIrate)
-		init_rate |= BIT(6);
-
-	raid = (bitmap >> 28) & 0x0f;
-
-	bitmap &= 0x0fffffff;
-
-	ODM_RA_UpdateRateInfo_8188E(odmpriv, macid, raid, bitmap, shortGIrate);
-}
-
-void rtl8188e_set_FwPwrMode_cmd(struct adapter *adapt, u8 Mode)
-{
-	struct setpwrmode_parm H2CSetPwrMode;
-	struct pwrctrl_priv *pwrpriv = &adapt->pwrctrlpriv;
-	u8 RLBM = 0; /*  0:Min, 1:Max, 2:User define */
-
-	switch (Mode) {
-	case PS_MODE_ACTIVE:
-		H2CSetPwrMode.Mode = 0;
-		break;
-	case PS_MODE_MIN:
-		H2CSetPwrMode.Mode = 1;
-		break;
-	case PS_MODE_MAX:
-		RLBM = 1;
-		H2CSetPwrMode.Mode = 1;
-		break;
-	case PS_MODE_DTIM:
-		RLBM = 2;
-		H2CSetPwrMode.Mode = 1;
-		break;
-	case PS_MODE_UAPSD_WMM:
-		H2CSetPwrMode.Mode = 2;
-		break;
-	default:
-		H2CSetPwrMode.Mode = 0;
-		break;
-	}
-
-	H2CSetPwrMode.SmartPS_RLBM = (((pwrpriv->smart_ps << 4) & 0xf0) | (RLBM & 0x0f));
-
-	H2CSetPwrMode.AwakeInterval = 1;
-
-	H2CSetPwrMode.bAllQueueUAPSD = adapt->registrypriv.uapsd_enable;
-
-	if (Mode > 0)
-		H2CSetPwrMode.PwrState = 0x00;/*  AllON(0x0C), RFON(0x04), RFOFF(0x00) */
-	else
-		H2CSetPwrMode.PwrState = 0x0C;/*  AllON(0x0C), RFON(0x04), RFOFF(0x00) */
-
-	FillH2CCmd_88E(adapt, H2C_PS_PWR_MODE, sizeof(H2CSetPwrMode), (u8 *)&H2CSetPwrMode);
-}
-
-void rtl8188e_set_FwMediaStatus_cmd(struct adapter *adapt, __le16 mstatus_rpt)
-{
-	u16 mst_rpt = le16_to_cpu(mstatus_rpt);
-
-	FillH2CCmd_88E(adapt, H2C_COM_MEDIA_STATUS_RPT, sizeof(mst_rpt), (u8 *)&mst_rpt);
-}
-
-static void ConstructBeacon(struct adapter *adapt, u8 *pframe, u32 *pLength)
-{
-	struct ieee80211_hdr *pwlanhdr;
-	__le16 *fctrl;
-	u32 rate_len, pktlen;
-	struct mlme_ext_priv *pmlmeext = &adapt->mlmeextpriv;
-	struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
-	struct wlan_bssid_ex *cur_network = &pmlmeinfo->network;
-	u8 bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-
-	pwlanhdr = (struct ieee80211_hdr *)pframe;
-
-	fctrl = &pwlanhdr->frame_control;
-	*(fctrl) = 0;
-
-	ether_addr_copy(pwlanhdr->addr1, bc_addr);
-	ether_addr_copy(pwlanhdr->addr2, myid(&adapt->eeprompriv));
-	ether_addr_copy(pwlanhdr->addr3, cur_network->MacAddress);
-
-	SetSeqNum(pwlanhdr, 0/*pmlmeext->mgnt_seq*/);
-	SetFrameSubType(pframe, IEEE80211_STYPE_BEACON);
-
-	pframe += sizeof(struct ieee80211_hdr_3addr);
-	pktlen = sizeof(struct ieee80211_hdr_3addr);
-
-	/* timestamp will be inserted by hardware */
-	pframe += 8;
-	pktlen += 8;
-
-	/*  beacon interval: 2 bytes */
-	memcpy(pframe, (unsigned char *)(rtw_get_beacon_interval_from_ie(cur_network->ies)), 2);
-
-	pframe += 2;
-	pktlen += 2;
-
-	/*  capability info: 2 bytes */
-	memcpy(pframe, (unsigned char *)(rtw_get_capability_from_ie(cur_network->ies)), 2);
-
-	pframe += 2;
-	pktlen += 2;
-
-	if ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE) {
-		pktlen += cur_network->ie_length - sizeof(struct ndis_802_11_fixed_ie);
-		memcpy(pframe, cur_network->ies + sizeof(struct ndis_802_11_fixed_ie), pktlen);
-
-		goto _ConstructBeacon;
-	}
-
-	/* below for ad-hoc mode */
-
-	/*  SSID */
-	pframe = rtw_set_ie(pframe, WLAN_EID_SSID, cur_network->ssid.ssid_length, cur_network->ssid.ssid, &pktlen);
-
-	/*  supported rates... */
-	rate_len = rtw_get_rateset_len(cur_network->SupportedRates);
-	pframe = rtw_set_ie(pframe, WLAN_EID_SUPP_RATES, min_t(u32, rate_len, 8), cur_network->SupportedRates, &pktlen);
-
-	/*  DS parameter set */
-	pframe = rtw_set_ie(pframe, WLAN_EID_DS_PARAMS, 1, (unsigned char *)&cur_network->Configuration.DSConfig, &pktlen);
-
-	if ((pmlmeinfo->state & 0x03) == WIFI_FW_ADHOC_STATE) {
-		u32 ATIMWindow;
-		/*  IBSS Parameter Set... */
-		ATIMWindow = 0;
-		pframe = rtw_set_ie(pframe, WLAN_EID_IBSS_PARAMS, 2, (unsigned char *)(&ATIMWindow), &pktlen);
-	}
-
-	/* todo: ERP IE */
-
-	/*  EXTERNDED SUPPORTED RATE */
-	if (rate_len > 8)
-		pframe = rtw_set_ie(pframe, WLAN_EID_EXT_SUPP_RATES, (rate_len - 8), (cur_network->SupportedRates + 8), &pktlen);
-
-	/* todo:HT for adhoc */
-
-_ConstructBeacon:
-
-	if ((pktlen + TXDESC_SIZE) > 512)
-		return;
-
-	*pLength = pktlen;
-}
-
-static void ConstructPSPoll(struct adapter *adapt, u8 *pframe, u32 *pLength)
-{
-	struct ieee80211_hdr *pwlanhdr;
-	struct mlme_ext_priv *pmlmeext = &adapt->mlmeextpriv;
-	struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
-	__le16 *fctrl;
-	struct wlan_bssid_ex *pnetwork = &pmlmeinfo->network;
-
-	pwlanhdr = (struct ieee80211_hdr *)pframe;
-
-	/*  Frame control. */
-	fctrl = &pwlanhdr->frame_control;
-	*(fctrl) = 0;
-	SetPwrMgt(fctrl);
-	SetFrameSubType(pframe, IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
-
-	/*  AID. */
-	SetDuration(pframe, (pmlmeinfo->aid | 0xc000));
-
-	/*  BSSID. */
-	ether_addr_copy(pwlanhdr->addr1, pnetwork->MacAddress);
-
-	/*  TA. */
-	ether_addr_copy(pwlanhdr->addr2, myid(&adapt->eeprompriv));
-
-	*pLength = 16;
-}
-
-static void ConstructNullFunctionData(struct adapter *adapt, u8 *pframe,
-	u32 *pLength,
-	u8 *StaAddr,
-	u8 bQoS,
-	u8 AC,
-	u8 bEosp,
-	u8 bForcePowerSave)
-{
-	struct ieee80211_hdr *pwlanhdr;
-	__le16 *fctrl;
-	u32 pktlen;
-	struct mlme_priv *pmlmepriv = &adapt->mlmepriv;
-	struct wlan_network *cur_network = &pmlmepriv->cur_network;
-	struct mlme_ext_priv *pmlmeext = &adapt->mlmeextpriv;
-	struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
-	struct wlan_bssid_ex *pnetwork = &pmlmeinfo->network;
-
-	pwlanhdr = (struct ieee80211_hdr *)pframe;
-
-	fctrl = &pwlanhdr->frame_control;
-	*(fctrl) = 0;
-	if (bForcePowerSave)
-		SetPwrMgt(fctrl);
-
-	switch (cur_network->network.InfrastructureMode) {
-	case Ndis802_11Infrastructure:
-		SetToDs(fctrl);
-		ether_addr_copy(pwlanhdr->addr1, pnetwork->MacAddress);
-		ether_addr_copy(pwlanhdr->addr2, myid(&adapt->eeprompriv));
-		ether_addr_copy(pwlanhdr->addr3, StaAddr);
-		break;
-	case Ndis802_11APMode:
-		SetFrDs(fctrl);
-		ether_addr_copy(pwlanhdr->addr1, StaAddr);
-		ether_addr_copy(pwlanhdr->addr2, pnetwork->MacAddress);
-		ether_addr_copy(pwlanhdr->addr3, myid(&adapt->eeprompriv));
-		break;
-	case Ndis802_11IBSS:
-	default:
-		ether_addr_copy(pwlanhdr->addr1, StaAddr);
-		ether_addr_copy(pwlanhdr->addr2, myid(&adapt->eeprompriv));
-		ether_addr_copy(pwlanhdr->addr3, pnetwork->MacAddress);
-		break;
-	}
-
-	SetSeqNum(pwlanhdr, 0);
-
-	if (bQoS) {
-		struct ieee80211_qos_hdr *pwlanqoshdr;
-
-		SetFrameSubType(pframe, IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC);
-
-		pwlanqoshdr = (struct ieee80211_qos_hdr *)pframe;
-		SetPriority(&pwlanqoshdr->qos_ctrl, AC);
-		SetEOSP(&pwlanqoshdr->qos_ctrl, bEosp);
-
-		pktlen = sizeof(struct ieee80211_qos_hdr);
-	} else {
-		SetFrameSubType(pframe, IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC);
-
-		pktlen = sizeof(struct ieee80211_hdr_3addr);
-	}
-
-	*pLength = pktlen;
-}
-
-static void ConstructProbeRsp(struct adapter *adapt, u8 *pframe, u32 *pLength, u8 *StaAddr, bool bHideSSID)
-{
-	struct ieee80211_hdr *pwlanhdr;
-	__le16 *fctrl;
-	u8 *mac, *bssid;
-	u32 pktlen;
-	struct mlme_ext_priv *pmlmeext = &adapt->mlmeextpriv;
-	struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
-	struct wlan_bssid_ex *cur_network = &pmlmeinfo->network;
-
-	pwlanhdr = (struct ieee80211_hdr *)pframe;
-
-	mac = myid(&adapt->eeprompriv);
-	bssid = cur_network->MacAddress;
-
-	fctrl = &pwlanhdr->frame_control;
-	*(fctrl) = 0;
-	ether_addr_copy(pwlanhdr->addr1, StaAddr);
-	ether_addr_copy(pwlanhdr->addr2, mac);
-	ether_addr_copy(pwlanhdr->addr3, bssid);
-
-	SetSeqNum(pwlanhdr, 0);
-	SetFrameSubType(fctrl, IEEE80211_STYPE_PROBE_RESP);
-
-	pktlen = sizeof(struct ieee80211_hdr_3addr);
-	pframe += pktlen;
-
-	if (cur_network->ie_length > MAX_IE_SZ)
-		return;
-
-	memcpy(pframe, cur_network->ies, cur_network->ie_length);
-	pframe += cur_network->ie_length;
-	pktlen += cur_network->ie_length;
-
-	*pLength = pktlen;
-}
-
-/*  */
-/*  Description: Fill the reserved packets that FW will use to RSVD page. */
-/*			Now we just send 4 types packet to rsvd page. */
-/*			(1)Beacon, (2)Ps-poll, (3)Null data, (4)ProbeRsp. */
-/*	Input: */
-/*	    bDLFinished - false: At the first time we will send all the packets as a large packet to Hw, */
-/*						so we need to set the packet length to total length. */
-/*			      true: At the second time, we should send the first packet (default:beacon) */
-/*						to Hw again and set the length in descriptor to the real beacon length. */
-/*  2009.10.15 by tynli. */
-static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
-{
-	struct xmit_frame *pmgntframe;
-	struct pkt_attrib *pattrib;
-	struct xmit_priv *pxmitpriv;
-	struct mlme_ext_priv *pmlmeext;
-	struct mlme_ext_info *pmlmeinfo;
-	u32 BeaconLength = 0, ProbeRspLength = 0, PSPollLength;
-	u32 NullDataLength, QosNullLength;
-	u8 *ReservedPagePacket;
-	u8 PageNum, PageNeed, TxDescLen;
-	u16 BufIndex;
-	u32 TotalPacketLen;
-	struct rsvdpage_loc RsvdPageLoc;
-	struct wlan_bssid_ex *pnetwork;
-
-	ReservedPagePacket = kzalloc(1000, GFP_KERNEL);
-	if (!ReservedPagePacket)
-		return;
-
-	pxmitpriv = &adapt->xmitpriv;
-	pmlmeext = &adapt->mlmeextpriv;
-	pmlmeinfo = &pmlmeext->mlmext_info;
-	pnetwork = &pmlmeinfo->network;
-
-	TxDescLen = TXDESC_SIZE;
-	PageNum = 0;
-
-	/* 3 (1) beacon * 2 pages */
-	BufIndex = TXDESC_OFFSET;
-	ConstructBeacon(adapt, &ReservedPagePacket[BufIndex], &BeaconLength);
-
-	/*  When we count the first page size, we need to reserve description size for the RSVD */
-	/*  packet, it will be filled in front of the packet in TXPKTBUF. */
-	PageNeed = (u8)PageNum_128(TxDescLen + BeaconLength);
-	/*  To reserved 2 pages for beacon buffer. 2010.06.24. */
-	if (PageNeed == 1)
-		PageNeed += 1;
-	PageNum += PageNeed;
-
-	BufIndex += PageNeed * 128;
-
-	/* 3 (2) ps-poll *1 page */
-	RsvdPageLoc.LocPsPoll = PageNum;
-	ConstructPSPoll(adapt, &ReservedPagePacket[BufIndex], &PSPollLength);
-	rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex - TxDescLen], PSPollLength, true, false);
-
-	PageNeed = (u8)PageNum_128(TxDescLen + PSPollLength);
-	PageNum += PageNeed;
-
-	BufIndex += PageNeed * 128;
-
-	/* 3 (3) null data * 1 page */
-	RsvdPageLoc.LocNullData = PageNum;
-	ConstructNullFunctionData(adapt, &ReservedPagePacket[BufIndex], &NullDataLength, pnetwork->MacAddress, false, 0, 0, false);
-	rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex - TxDescLen], NullDataLength, false, false);
-
-	PageNeed = (u8)PageNum_128(TxDescLen + NullDataLength);
-	PageNum += PageNeed;
-
-	BufIndex += PageNeed * 128;
-
-	/* 3 (4) probe response * 1page */
-	RsvdPageLoc.LocProbeRsp = PageNum;
-	ConstructProbeRsp(adapt, &ReservedPagePacket[BufIndex], &ProbeRspLength, pnetwork->MacAddress, false);
-	rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex - TxDescLen], ProbeRspLength, false, false);
-
-	PageNeed = (u8)PageNum_128(TxDescLen + ProbeRspLength);
-	PageNum += PageNeed;
-
-	BufIndex += PageNeed * 128;
-
-	/* 3 (5) Qos null data */
-	RsvdPageLoc.LocQosNull = PageNum;
-	ConstructNullFunctionData(adapt, &ReservedPagePacket[BufIndex],
-				  &QosNullLength, pnetwork->MacAddress, true, 0, 0, false);
-	rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex - TxDescLen], QosNullLength, false, false);
-
-	PageNeed = (u8)PageNum_128(TxDescLen + QosNullLength);
-	PageNum += PageNeed;
-
-	TotalPacketLen = BufIndex + QosNullLength;
-	pmgntframe = alloc_mgtxmitframe(pxmitpriv);
-	if (!pmgntframe)
-		goto exit;
-
-	/*  update attribute */
-	pattrib = &pmgntframe->attrib;
-	update_mgntframe_attrib(adapt, pattrib);
-	pattrib->qsel = 0x10;
-	pattrib->last_txcmdsz = TotalPacketLen - TXDESC_OFFSET;
-	pattrib->pktlen = pattrib->last_txcmdsz;
-	memcpy(pmgntframe->buf_addr, ReservedPagePacket, TotalPacketLen);
-
-	rtw_hal_mgnt_xmit(adapt, pmgntframe);
-
-	FillH2CCmd_88E(adapt, H2C_COM_RSVD_PAGE, sizeof(RsvdPageLoc), (u8 *)&RsvdPageLoc);
-
-exit:
-	kfree(ReservedPagePacket);
-}
-
-void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
-{
-	struct hal_data_8188e *haldata = adapt->HalData;
-	struct mlme_ext_priv *pmlmeext = &adapt->mlmeextpriv;
-	struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
-	bool bSendBeacon = false;
-	bool bcn_valid = false;
-	u8 DLBcnCount = 0;
-	u32 poll = 0;
-
-	if (mstatus == 1) {
-		/*  We should set AID, correct TSF, HW seq enable before set JoinBssReport to Fw in 88/92C. */
-		/*  Suggested by filen. Added by tynli. */
-		usb_write16(adapt, REG_BCN_PSR_RPT, (0xC000 | pmlmeinfo->aid));
-		/*  Do not set TSF again here or vWiFi beacon DMA INT will not work. */
-
-		/* Set REG_CR bit 8. DMA beacon by SW. */
-		haldata->RegCR_1 |= BIT(0);
-		usb_write8(adapt,  REG_CR + 1, haldata->RegCR_1);
-
-		/*  Disable Hw protection for a time which revserd for Hw sending beacon. */
-		/*  Fix download reserved page packet fail that access collision with the protection time. */
-		/*  2010.05.11. Added by tynli. */
-		usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) & (~BIT(3)));
-		usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) | BIT(4));
-
-		if (haldata->RegFwHwTxQCtrl & BIT(6))
-			bSendBeacon = true;
-
-		/*  Set FWHW_TXQ_CTRL 0x422[6]=0 to tell Hw the packet is not a real beacon frame. */
-		usb_write8(adapt, REG_FWHW_TXQ_CTRL + 2, (haldata->RegFwHwTxQCtrl & (~BIT(6))));
-		haldata->RegFwHwTxQCtrl &= (~BIT(6));
-
-		/*  Clear beacon valid check bit. */
-		rtw_hal_set_hwreg(adapt, HW_VAR_BCN_VALID, NULL);
-		DLBcnCount = 0;
-		poll = 0;
-		do {
-			/*  download rsvd page. */
-			SetFwRsvdPagePkt(adapt, false);
-			DLBcnCount++;
-			do {
-				yield();
-				/* mdelay(10); */
-				/*  check rsvd page download OK. */
-				rtw_hal_get_hwreg(adapt, HW_VAR_BCN_VALID, (u8 *)(&bcn_valid));
-				poll++;
-			} while (!bcn_valid && (poll % 10) != 0 && !adapt->bSurpriseRemoved && !adapt->bDriverStopped);
-		} while (!bcn_valid && DLBcnCount <= 100 && !adapt->bSurpriseRemoved && !adapt->bDriverStopped);
-
-		/*  */
-		/*  We just can send the reserved page twice during the time that Tx thread is stopped (e.g. pnpsetpower) */
-		/*  because we need to free the Tx BCN Desc which is used by the first reserved page packet. */
-		/*  At run time, we cannot get the Tx Desc until it is released in TxHandleInterrupt() so we will return */
-		/*  the beacon TCB in the following code. 2011.11.23. by tynli. */
-		/*  */
-
-		/*  Enable Bcn */
-		usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) | BIT(3));
-		usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) & (~BIT(4)));
-
-		/*  To make sure that if there exists an adapter which would like to send beacon. */
-		/*  If exists, the origianl value of 0x422[6] will be 1, we should check this to */
-		/*  prevent from setting 0x422[6] to 0 after download reserved page, or it will cause */
-		/*  the beacon cannot be sent by HW. */
-		/*  2010.06.23. Added by tynli. */
-		if (bSendBeacon) {
-			usb_write8(adapt, REG_FWHW_TXQ_CTRL + 2, (haldata->RegFwHwTxQCtrl | BIT(6)));
-			haldata->RegFwHwTxQCtrl |= BIT(6);
-		}
-
-		/*  Update RSVD page location H2C to Fw. */
-		if (bcn_valid)
-			rtw_hal_set_hwreg(adapt, HW_VAR_BCN_VALID, NULL);
-
-		/*  Do not enable HW DMA BCN or it will cause Pcie interface hang by timing issue. 2011.11.24. by tynli. */
-		/*  Clear CR[8] or beacon packet will not be send to TxBuf anymore. */
-		haldata->RegCR_1 &= (~BIT(0));
-		usb_write8(adapt,  REG_CR + 1, haldata->RegCR_1);
-	}
-}