diff options
| author |   Aastha Gupta <aastha.gupta4104@gmail.com> | 2017-10-05 18:36:21 +0530 |
|---|---|---|
| committer |   Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-10-18 15:35:59 +0200 |
| commit | f6cadc1bb9cc520fc3d3f20da25538e164af8eec (patch) | |
| tree | d4e457ae8301c1aa424be3790c79ba032d1fccc2 /drivers/staging/rtl8188eu | |
| parent | staging: lustre: fix comparisons should place the constant on the right side (diff) | |
| download | linux-dev-f6cadc1bb9cc520fc3d3f20da25538e164af8eec.tar.xz linux-dev-f6cadc1bb9cc520fc3d3f20da25538e164af8eec.zip | |
staging: rtl8188eu: fix block comment styling in rtl8188eu files
This patch fixes checkpatch.pl warnings for block comment styling.
1. Block comment use a trailing */ on a separate line.
2. Block comment use * on subsequent lines.
3. Block comment should align * on each line.
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/staging/rtl8188eu')
27 files changed, 514 insertions, 395 deletions
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h b/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h index 550ad62e7064..4e5d7fc6de07 100644 --- a/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h +++ b/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h @@ -75,7 +75,8 @@ enum rf_radio_path { #define CHANNEL_MAX_NUMBER 14 /* 14 is the max chnl number */ #define MAX_CHNL_GROUP_24G 6 /* ch1~2, ch3~5, ch6~8, *ch9~11, ch12~13, CH 14 - * total three groups */ + * total three groups + */ #define CHANNEL_GROUP_MAX_88E 6 enum wireless_mode { @@ -116,35 +117,45 @@ struct bb_reg_def { /* 0x80c~0x80f [4 bytes] */ u32 rfHSSIPara1; /* wire parameter control1 : */ /* 0x820~0x823,0x828~0x82b, - * 0x830~0x833, 0x838~0x83b [16 bytes] */ + * 0x830~0x833, 0x838~0x83b [16 bytes] + */ u32 rfHSSIPara2; /* wire parameter control2 : */ /* 0x824~0x827,0x82c~0x82f, 0x834~0x837, - * 0x83c~0x83f [16 bytes] */ + * 0x83c~0x83f [16 bytes] + */ u32 rfSwitchControl; /* Tx Rx antenna control : */ /* 0x858~0x85f [16 bytes] */ u32 rfAGCControl1; /* AGC parameter control1 : */ /* 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, - * 0xc68~0xc6b [16 bytes] */ + * 0xc68~0xc6b [16 bytes] + */ u32 rfAGCControl2; /* AGC parameter control2 : */ /* 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, - * 0xc6c~0xc6f [16 bytes] */ + * 0xc6c~0xc6f [16 bytes] + */ u32 rfRxIQImbalance; /* OFDM Rx IQ imbalance matrix : */ /* 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, - * 0xc2c~0xc2f [16 bytes] */ + * 0xc2c~0xc2f [16 bytes] + */ u32 rfRxAFE; /* Rx IQ DC ofset and Rx digital filter, - * Rx DC notch filter : */ + * Rx DC notch filter : + */ /* 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, - * 0xc28~0xc2b [16 bytes] */ + * 0xc28~0xc2b [16 bytes] + */ u32 rfTxIQImbalance; /* OFDM Tx IQ imbalance matrix */ /* 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, - * 0xc98~0xc9b [16 bytes] */ + * 0xc98~0xc9b [16 bytes] + */ u32 rfTxAFE; /* Tx IQ DC Offset and Tx DFIR type */ /* 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, - * 0xc9c~0xc9f [16 bytes] */ + * 0xc9c~0xc9f [16 bytes] + */ u32 rfLSSIReadBack; /* LSSI RF readback data SI mode */ /* 0x8a0~0x8af [16 bytes] */ u32 rfLSSIReadBackPi; /* LSSI RF readback data PI mode 0x8b8-8bc for - * Path A and B */ + * Path A and B + */ }; /*------------------------------Define structure----------------------------*/ diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h b/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h index 04159a9f90d3..8cbba85e1587 100644 --- a/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h +++ b/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h @@ -136,7 +136,8 @@ #define rCCK0_CCA 0xa08 /* AGC default value, saturation level Antenna Diversity, RX AGC, LNA Threshold, - * RX LNA Threshold useless now. Not the same as 90 series */ + * RX LNA Threshold useless now. Not the same as 90 series + */ #define rCCK0_RxAGC1 0xa0c #define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */ diff --git a/drivers/staging/rtl8188eu/include/Hal8188ERateAdaptive.h b/drivers/staging/rtl8188eu/include/Hal8188ERateAdaptive.h index 21996a1173ef..c7218c49ed71 100644 --- a/drivers/staging/rtl8188eu/include/Hal8188ERateAdaptive.h +++ b/drivers/staging/rtl8188eu/include/Hal8188ERateAdaptive.h @@ -1,19 +1,19 @@ #ifndef __INC_RA_H #define __INC_RA_H -/*++ -Copyright (c) Realtek Semiconductor Corp. All rights reserved. - -Module Name: - RateAdaptive.h - -Abstract: - Prototype of RA and related data structure. - -Major Change History: - When Who What - ---------- --------------- ------------------------------- - 2011-08-12 Page Create. ---*/ +/* + * Copyright (c) Realtek Semiconductor Corp. All rights reserved. + * + * Module Name: + * RateAdaptive.h + * + * Abstract: + * Prototype of RA and related data structure. + * + * Major Change History: + * When Who What + * ---------- --------------- ------------------------------- + * 2011-08-12 Page Create. + */ /* Rate adaptive define */ #define PERENTRY 23 diff --git a/drivers/staging/rtl8188eu/include/basic_types.h b/drivers/staging/rtl8188eu/include/basic_types.h index 69c4d49f43ab..73cc86705cf3 100644 --- a/drivers/staging/rtl8188eu/include/basic_types.h +++ b/drivers/staging/rtl8188eu/include/basic_types.h @@ -1,4 +1,4 @@ -/****************************************************************************** + /****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * @@ -20,14 +20,15 @@ /* port from fw */ /* TODO: Macros Below are Sync from SD7-Driver. It is necessary - * to check correctness */ + * to check correctness + */ /* * Call endian free function when * 1. Read/write packet content. * 2. Before write integer to IO. * 3. After read integer from IO. -*/ + */ /* Convert little data endian to host ordering */ #define EF1BYTE(_val) \ @@ -74,9 +75,10 @@ #define LE_P1BYTE_TO_HOST_1BYTE(__pstart) \ (EF1BYTE(*((u8 *)(__pstart)))) -/*Description: -Translate subfield (continuous bits in little-endian) of 4-byte -value to host byte ordering.*/ +/* Description: + * Translate subfield (continuous bits in little-endian) of 4-byte + * value to host byte ordering. + */ #define LE_BITS_TO_4BYTE(__pstart, __bitoffset, __bitlen) \ ( \ (LE_P4BYTE_TO_HOST_4BYTE(__pstart) >> (__bitoffset)) & \ diff --git a/drivers/staging/rtl8188eu/include/drv_types.h b/drivers/staging/rtl8188eu/include/drv_types.h index c3517c0903ca..2734565ce802 100644 --- a/drivers/staging/rtl8188eu/include/drv_types.h +++ b/drivers/staging/rtl8188eu/include/drv_types.h @@ -128,7 +128,8 @@ struct dvobj_priv { static inline struct device *dvobj_to_dev(struct dvobj_priv *dvobj) { /* todo: get interface type from dvobj and the return - * the dev accordingly */ + * the dev accordingly + */ return &dvobj->pusbintf->dev; }; diff --git a/drivers/staging/rtl8188eu/include/hal_intf.h b/drivers/staging/rtl8188eu/include/hal_intf.h index dfdbd0254886..da4ee1561c36 100644 --- a/drivers/staging/rtl8188eu/include/hal_intf.h +++ b/drivers/staging/rtl8188eu/include/hal_intf.h @@ -96,9 +96,11 @@ enum hw_variables { HW_VAR_FIFO_CLEARN_UP, HW_VAR_CHECK_TXBUF, HW_VAR_APFM_ON_MAC, /* Auto FSM to Turn On, include clock, isolation, - * power control for MAC only */ + * power control for MAC only + */ /* The valid upper nav range for the HW updating, if the true value is - * larger than the upper range, the HW won't update it. */ + * larger than the upper range, the HW won't update it. + */ /* Unit in microsecond. 0 means disable this function. */ HW_VAR_NAV_UPPER, HW_VAR_RPT_TIMER_SETTING, diff --git a/drivers/staging/rtl8188eu/include/ieee80211.h b/drivers/staging/rtl8188eu/include/ieee80211.h index 284db7d00f50..5075cb4d68b5 100644 --- a/drivers/staging/rtl8188eu/include/ieee80211.h +++ b/drivers/staging/rtl8188eu/include/ieee80211.h @@ -276,12 +276,13 @@ struct sta_data { #define IEEE80211_DATA_LEN 2304 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section - 6.2.1.1.2. + * 6.2.1.1.2. - The figure in section 7.1.2 suggests a body size of up to 2312 - bytes is allowed, which is a bit confusing, I suspect this - represents the 2304 bytes of real data, plus a possible 8 bytes of - WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ + * The figure in section 7.1.2 suggests a body size of up to 2312 + * bytes is allowed, which is a bit confusing, I suspect this + * represents the 2304 bytes of real data, plus a possible 8 bytes of + * WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) + */ #define IEEE80211_HLEN 30 @@ -423,7 +424,8 @@ struct ieee80211_snap_hdr { /* IEEE 802.11 requires that STA supports concurrent reception of at least * three fragmented frames. This define can be increased to support more * concurrent frames, but it should be noted that each entry can consume about - * 2 kB of RAM and increasing cache size will slow down frame reassembly. */ + * 2 kB of RAM and increasing cache size will slow down frame reassembly. + */ #define IEEE80211_FRAG_CACHE_LEN 4 #define SEC_KEY_1 (1<<0) @@ -451,7 +453,8 @@ struct ieee80211_snap_hdr { /* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs * only use 8, and then use extended rates for the remaining supported * rates. Other APs, however, stick all of their supported rates on the - * main rates information element... */ + * main rates information element... + */ #define MAX_RATES_LENGTH ((u8)12) #define MAX_RATES_EX_LENGTH ((u8)16) #define MAX_NETWORK_COUNT 128 @@ -473,11 +476,11 @@ struct ieee80211_snap_hdr { #define IW_ESSID_MAX_SIZE 32 /* -join_res: --1: authentication fail --2: association fail -> 0: TID -*/ + * join_res: + * -1: authentication fail + * -2: association fail + * > 0: TID + */ enum ieee80211_state { /* the card is not linked at all */ @@ -615,7 +618,8 @@ enum rtw_ieee80211_back_parties { }; #define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs) - * 00:50:F2 */ + * 00:50:F2 + */ #define WME_OUI_TYPE 2 #define WME_OUI_SUBTYPE_INFORMATION_ELEMENT 0 #define WME_OUI_SUBTYPE_PARAMETER_ELEMENT 1 diff --git a/drivers/staging/rtl8188eu/include/odm.h b/drivers/staging/rtl8188eu/include/odm.h index 50e2673edbf7..dd44f45cc3d3 100644 --- a/drivers/staging/rtl8188eu/include/odm.h +++ b/drivers/staging/rtl8188eu/include/odm.h @@ -36,7 +36,8 @@ /* Mainly, it just retains last scan result and scan again. */ /* After that, it compares the scan result to see which one gets better * RSSI. It selects antenna with better receiving power and returns better - * scan result. */ + * scan result. + */ #define TP_MODE 0 #define RSSI_MODE 1 @@ -173,10 +174,12 @@ struct rx_hpc { /* This indicates two different steps. */ /* In SWAW_STEP_PEAK, driver needs to switch antenna and listen to - * the signal on the air. */ + * the signal on the air. + */ /* In SWAW_STEP_DETERMINE, driver just compares the signal captured in * SWAW_STEP_PEAK with original RSSI to determine if it is necessary to - * switch antenna. */ + * switch antenna. + */ #define SWAW_STEP_PEAK 0 #define SWAW_STEP_DETERMINE 1 @@ -265,7 +268,8 @@ struct odm_phy_status_info { s8 RxPower; /* in dBm Translate from PWdB */ s8 RecvSignalPower;/* Real power in dBm for this packet, no * beautification and aggregation. Keep this raw - * info to be used for the other procedures. */ + * info to be used for the other procedures. + */ u8 BTRxRSSIPercentage; u8 SignalStrength; /* in 0-100 index. */ u8 RxPwr[MAX_PATH_NUM_92CS];/* per-path's pwdb */ @@ -567,7 +571,8 @@ struct odm_ra_info { u8 PTPreRssi; /* if RSSI change 5% do PT */ u8 PTModeSS; /* decide whitch rate should do PT */ u8 RAstage; /* StageRA, decide how many times RA will be done - * between PT */ + * between PT + */ u8 PTSmoothFactor; }; @@ -587,12 +592,14 @@ struct odm_rf_cal { u8 TXPowercount; bool bTXPowerTracking; u8 TxPowerTrackControl; /* for mp mode, turn off txpwrtracking - * as default */ + * as default + */ u8 TM_Trigger; u8 InternalPA5G[2]; /* pathA / pathB */ u8 ThermalMeter[2]; /* ThermalMeter, index 0 for RFIC0, - * and 1 for RFIC1 */ + * and 1 for RFIC1 + */ u8 ThermalValue; u8 ThermalValue_LCK; u8 ThermalValue_IQK; @@ -714,7 +721,8 @@ struct odm_dm_struct { /* ODM PCIE/USB/SDIO/GSPI = 0/1/2/3 */ u8 SupportInterface; /* ODM composite or independent. Bit oriented/ 92C+92D+ .... or any - * other type = 1/2/3/... */ + * other type = 1/2/3/... + */ u32 SupportICType; /* Cut Version TestChip/A-cut/B-cut... = 0/1/2/3/... */ u8 CutVersion; @@ -788,19 +796,21 @@ struct odm_dm_struct { bool bBtHsOperation; /* BT HS mode is under progress */ u8 btHsDigVal; /* use BT rssi to decide the DIG value */ bool bBtDisableEdcaTurbo;/* Under some condition, don't enable the - * EDCA Turbo */ + * EDCA Turbo + */ bool bBtBusy; /* BT is busy. */ /* CALL BY VALUE------------- */ /* 2 Define STA info. */ /* _ODM_STA_INFO */ - /* For MP, we need to reduce one array pointer for default port.?? */ + /* For MP, we need to reduce one array pointer for default port.??*/ struct sta_info *pODM_StaInfo[ODM_ASSOCIATE_ENTRY_NUM]; u16 CurrminRptTime; struct odm_ra_info RAInfo[ODM_ASSOCIATE_ENTRY_NUM]; /* Use MacID as - * array index. STA MacID=0, - * VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1} */ + * array index. STA MacID=0, + * VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1} + */ /* */ /* 2012/02/14 MH Add to share 88E ra with other SW team. */ /* We need to colelct all support abilit to a proper area. */ @@ -1029,9 +1039,11 @@ extern u8 CCKSwingTable_Ch14[CCK_TABLE_SIZE][8]; /* 20100514 Joseph: Add definition for antenna switching test after link. */ /* This indicates two different the steps. */ /* In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the - * signal on the air. */ + * signal on the air. + */ /* In SWAW_STEP_DETERMINE, driver just compares the signal captured in - * SWAW_STEP_PEAK */ + * SWAW_STEP_PEAK + */ /* with original RSSI to determine if it is necessary to switch antenna. */ #define SWAW_STEP_PEAK 0 #define SWAW_STEP_DETERMINE 1 diff --git a/drivers/staging/rtl8188eu/include/pwrseq.h b/drivers/staging/rtl8188eu/include/pwrseq.h index addf90b60ce9..bd77a50c0d41 100644 --- a/drivers/staging/rtl8188eu/include/pwrseq.h +++ b/drivers/staging/rtl8188eu/include/pwrseq.h @@ -20,28 +20,28 @@ #include "pwrseqcmd.h" /* - Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd - There are 6 HW Power States: - 0: POFF--Power Off - 1: PDN--Power Down - 2: CARDEMU--Card Emulation - 3: ACT--Active Mode - 4: LPS--Low Power State - 5: SUS--Suspend - - The transition from different states are defined below - TRANS_CARDEMU_TO_ACT - TRANS_ACT_TO_CARDEMU - TRANS_CARDEMU_TO_SUS - TRANS_SUS_TO_CARDEMU - TRANS_CARDEMU_TO_PDN - TRANS_ACT_TO_LPS - TRANS_LPS_TO_ACT - - TRANS_END - - PWR SEQ Version: rtl8188E_PwrSeq_V09.h -*/ + * Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd + * There are 6 HW Power States: + * 0: POFF--Power Off + * 1: PDN--Power Down + * 2: CARDEMU--Card Emulation + * 3: ACT--Active Mode + * 4: LPS--Low Power State + * 5: SUS--Suspend + * + * The transition from different states are defined below + * TRANS_CARDEMU_TO_ACT + * TRANS_ACT_TO_CARDEMU + * TRANS_CARDEMU_TO_SUS + * TRANS_SUS_TO_CARDEMU + * TRANS_CARDEMU_TO_PDN + * TRANS_ACT_TO_LPS + * TRANS_LPS_TO_ACT + * + * TRANS_END + * + * PWR SEQ Version: rtl8188E_PwrSeq_V09.h + */ #define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10 #define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10 #define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10 diff --git a/drivers/staging/rtl8188eu/include/rtl8188e_hal.h b/drivers/staging/rtl8188eu/include/rtl8188e_hal.h index 9330361da4ad..827cd4de9a3e 100644 --- a/drivers/staging/rtl8188eu/include/rtl8188e_hal.h +++ b/drivers/staging/rtl8188eu/include/rtl8188e_hal.h @@ -81,7 +81,8 @@ enum usb_rx_agg_mode { #define MAX_RX_DMA_BUFFER_SIZE_88E \ 0x2400 /* 9k for 88E nornal chip , MaxRxBuff=10k-max(TxReportSize(64*8), - * WOLPattern(16*24)) */ + * WOLPattern(16*24)) + */ #define MAX_TX_REPORT_BUFFER_SIZE 0x0400 /* 1k */ @@ -94,11 +95,13 @@ enum usb_rx_agg_mode { #define TX_SELE_NQ BIT(2) /* Normal Queue */ /* Note: We will divide number of page equally for each queue other - * than public queue! */ + * than public queue! + */ /* 22k = 22528 bytes = 176 pages (@page = 128 bytes) */ /* must reserved about 7 pages for LPS => 176-7 = 169 (0xA9) */ /* 2*BCN / 1*ps-poll / 1*null-data /1*prob_rsp /1*QOS null-data /1*BT QOS - * null-data */ + * null-data + */ #define TX_TOTAL_PAGE_NUMBER_88E 0xA9/* 169 (21632=> 21k) */ @@ -168,7 +171,8 @@ struct txpowerinfo24g { #define AVAILABLE_EFUSE_ADDR_88E(addr) \ (addr < EFUSE_REAL_CONTENT_LEN_88E) /* To prevent out of boundary programming case, leave 1byte and program - * full section */ + * full section + */ /* 9bytes + 1byt + 5bytes and pre 1byte. */ /* For worst case: */ /* | 2byte|----8bytes----|1byte|--7bytes--| 92D */ @@ -293,7 +297,8 @@ struct hal_data_8188e { u8 bDumpRxPkt;/* for debug */ u8 bDumpTxPkt;/* for debug */ u8 FwRsvdPageStartOffset; /* Reserve page start offset except - * beacon in TxQ. */ + * beacon in TxQ. + */ /* 2010/08/09 MH Add CU power down mode. */ bool pwrdown; @@ -307,7 +312,8 @@ struct hal_data_8188e { u16 EfuseUsedBytes; /* Auto FSM to Turn On, include clock, isolation, power control - * for MAC only */ + * for MAC only + */ u8 bMacPwrCtrlOn; u32 UsbBulkOutSize; @@ -324,7 +330,8 @@ struct hal_data_8188e { enum usb_rx_agg_mode UsbRxAggMode; u8 UsbRxAggBlockCount; /* USB Block count. Block size is * 512-byte in high speed and 64-byte - * in full speed */ + * in full speed + */ u8 UsbRxAggBlockTimeout; u8 UsbRxAggPageCount; /* 8192C DMA page count */ u8 UsbRxAggPageTimeout; diff --git a/drivers/staging/rtl8188eu/include/rtl8188e_spec.h b/drivers/staging/rtl8188eu/include/rtl8188e_spec.h index c33d312c4069..03e5382acc36 100644 --- a/drivers/staging/rtl8188eu/include/rtl8188e_spec.h +++ b/drivers/staging/rtl8188eu/include/rtl8188e_spec.h @@ -62,12 +62,15 @@ #define REG_HSIMR 0x0058 #define REG_HSISR 0x005c #define REG_GPIO_PIN_CTRL_2 0x0060 /* RTL8723 WIFI/BT/GPS - * Multi-Function GPIO Pin Control. */ + * Multi-Function GPIO Pin Control. + */ #define REG_GPIO_IO_SEL_2 0x0062 /* RTL8723 WIFI/BT/GPS - * Multi-Function GPIO Select. */ + * Multi-Function GPIO Select. + */ #define REG_BB_PAD_CTRL 0x0064 #define REG_MULTI_FUNC_CTRL 0x0068 /* RTL8723 WIFI/BT/GPS - * Multi-Function control source. */ + * Multi-Function control source. + */ #define REG_GPIO_OUTPUT 0x006c #define REG_AFE_XTAL_CTRL_EXT 0x0078 /* RTL8188E */ #define REG_XCK_OUT_CTRL 0x007c /* RTL8188E */ @@ -87,7 +90,8 @@ #define REG_HIMRE_88E 0x00B8 #define REG_HISRE_88E 0x00BC #define REG_EFUSE_ACCESS 0x00CF /* Efuse access protection - * for RTL8723 */ + * for RTL8723 + */ #define REG_BIST_SCAN 0x00D0 #define REG_BIST_RPT 0x00D4 #define REG_BIST_ROM_RPT 0x00D8 @@ -252,21 +256,24 @@ #define REG_TXPAUSE 0x0522 #define REG_DIS_TXREQ_CLR 0x0523 #define REG_RD_CTRL 0x0524 -/* Format for offset 540h-542h: */ -/* [3:0]: TBTT prohibit setup in unit of 32us. The time for HW getting - * beacon content before TBTT. */ -/* [7:4]: Reserved. */ -/* [19:8]: TBTT prohibit hold in unit of 32us. The time for HW holding - * to send the beacon packet. */ -/* [23:20]: Reserved */ -/* Description: */ -/* | */ -/* |<--Setup--|--Hold------------>| */ -/* --------------|---------------------- */ -/* | */ -/* TBTT */ -/* Note: We cannot update beacon content to HW or send any AC packets during - * the time between Setup and Hold. */ +/* Format for offset 540h-542h: + * [3:0]: TBTT prohibit setup in unit of 32us. The time for HW getting + * beacon content before TBTT. + * + * [7:4]: Reserved. + * [19:8]: TBTT prohibit hold in unit of 32us. The time for HW holding + * to send the beacon packet. + * + * [23:20]: Reserved + * Description: + * | + * |<--Setup--|--Hold------------>| + * --------------|---------------------- + * | + * TBTT + * Note: We cannot update beacon content to HW or send any AC packets during + * the time between Setup and Hold. + */ #define REG_TBTT_PROHIBIT 0x0540 #define REG_RD_NAV_NXT 0x0544 #define REG_NAV_PROT_LEN 0x0546 @@ -340,13 +347,14 @@ #define RXERR_RPT_RST BIT(27) #define _RXERR_RPT_SEL(type) ((type) << 28) -/* Note: */ -/* The NAV upper value is very important to WiFi 11n 5.2.3 NAV test. +/* Note: + * The NAV upper value is very important to WiFi 11n 5.2.3 NAV test. * The default value is always too small, but the WiFi TestPlan test * by 25,000 microseconds of NAV through sending CTS in the air. * We must update this value greater than 25,000 microseconds to pass * the item. The offset of NAV_UPPER in 8192C Spec is incorrect, and - * the offset should be 0x0652. */ + * the offset should be 0x0652. + */ #define REG_NAV_UPPER 0x0652 /* unit of 128 */ /* WMA, BA, CCX */ @@ -455,7 +463,8 @@ /* GPIO pins output value */ #define GPIO_OUT (REG_GPIO_PIN_CTRL+1) /* GPIO pins output enable when a bit is set to "1"; otherwise, - * input is configured. */ + * input is configured. + */ #define GPIO_IO_SEL (REG_GPIO_PIN_CTRL+2) #define GPIO_MOD (REG_GPIO_PIN_CTRL+3) @@ -475,13 +484,13 @@ /* 8192C (MSR) Media Status Register (Offset 0x4C, 8 bits) */ /* -Network Type -00: No link -01: Link in ad hoc network -10: Link in infrastructure network -11: AP mode -Default: 00b. -*/ + * Network Type + * 00: No link + * 01: Link in ad hoc network + * 10: Link in infrastructure network + * 11: AP mode + * Default: 00b. + */ #define MSR_NOLINK 0x00 #define MSR_ADHOC 0x01 #define MSR_INFRA 0x02 @@ -635,26 +644,27 @@ So the following defines for 92C is not entire!!!!!! ===================================================================== =====================================================================*/ /* -Based on Datasheet V33---090401 -Register Summary -Current IOREG MAP -0x0000h ~ 0x00FFh System Configuration (256 Bytes) -0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes) -0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes) -0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes) -0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes) -0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes) -0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes) -0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes) -0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes) -*/ + * Based on Datasheet V33---090401 + * Register Summary + * Current IOREG MAP + * 0x0000h ~ 0x00FFh System Configuration (256 Bytes) + * 0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes) + * 0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes) + * 0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes) + * 0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes) + * 0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes) + * 0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes) + * 0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes) + * 0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes) + */ /* 8192C (TXPAUSE) transmission pause (Offset 0x522, 8 bits) */ -/* Note: */ -/* The bits of stopping AC(VO/VI/BE/BK) queue in datasheet - * RTL8192S/RTL8192C are wrong, */ -/* the correct arragement is VO - Bit0, VI - Bit1, BE - Bit2, - * and BK - Bit3. */ -/* 8723 and 88E may be not correct either in the earlier version. */ +/* Note: + * The bits of stopping AC(VO/VI/BE/BK) queue in datasheet + * RTL8192S/RTL8192C are wrong, + * the correct arragement is VO - Bit0, VI - Bit1, BE - Bit2, + * and BK - Bit3. + * 8723 and 88E may be not correct either in the earlier version. + */ #define StopBecon BIT(6) #define StopHigh BIT(5) #define StopMgt BIT(4) @@ -680,7 +690,8 @@ Current IOREG MAP #define RCR_AICV BIT(9) /* Accept ICV error packet */ #define RCR_ACRC32 BIT(8) /* Accept CRC32 error packet */ #define RCR_CBSSID_BCN BIT(7) /* Accept BSSID match packet - * (Rx beacon, probe rsp) */ + * (Rx beacon, probe rsp) + */ #define RCR_CBSSID_DATA BIT(6) /* Accept BSSID match (Data)*/ #define RCR_CBSSID RCR_CBSSID_DATA /* Accept BSSID match */ #define RCR_APWRMGT BIT(5) /* Accept power management pkt*/ @@ -1242,10 +1253,12 @@ Current IOREG MAP /* 2REG_C2HEVT_CLEAR */ /* Set by driver and notify FW that the driver has read - * the C2H command message */ + * the C2H command message + */ #define C2H_EVT_HOST_CLOSE 0x00 /* Set by FW indicating that FW had set the C2H command - * message and it's not yet read by driver. */ + * message and it's not yet read by driver. + */ #define C2H_EVT_FW_CLOSE 0xFF /* 2REG_MULTI_FUNC_CTRL(For RTL8723 Only) */ diff --git a/drivers/staging/rtl8188eu/include/rtw_cmd.h b/drivers/staging/rtl8188eu/include/rtw_cmd.h index f79feeb4e38f..2c026bf6fecb 100644 --- a/drivers/staging/rtl8188eu/include/rtw_cmd.h +++ b/drivers/staging/rtl8188eu/include/rtw_cmd.h @@ -97,13 +97,13 @@ enum RFINTFS { }; /* -Caller Mode: Infra, Ad-HoC(C) - -Notes: To disconnect the current associated BSS - -Command Mode - -*/ + * Caller Mode: Infra, Ad-HoC(C) + * + * Notes: To disconnect the current associated BSS + * + * Command Mode + * + */ struct disconnect_parm { u32 deauth_timeout_ms; }; @@ -114,13 +114,13 @@ struct setopmode_parm { }; /* -Caller Mode: AP, Ad-HoC, Infra - -Notes: To ask RTL8711 performing site-survey - -Command-Event Mode - -*/ + * Caller Mode: AP, Ad-HoC, Infra + * + * Notes: To ask RTL8711 performing site-survey + * + * Command-Event Mode + * + */ #define RTW_SSID_SCAN_AMOUNT 9 /* for WEXT_CSCAN_AMOUNT 9 */ #define RTW_CHANNEL_SCAN_AMOUNT (14+37) @@ -133,13 +133,13 @@ struct sitesurvey_parm { }; /* -Caller Mode: Any - -Notes: To set the auth type of RTL8711. open/shared/802.1x - -Command Mode - -*/ + * Caller Mode: Any + * + * Notes: To set the auth type of RTL8711. open/shared/802.1x + * + * Command Mode + * + */ struct setauth_parm { u8 mode; /* 0: legacy open, 1: legacy shared 2: 802.1x */ u8 _1x; /* 0: PSK, 1: TLS */ @@ -147,40 +147,42 @@ struct setauth_parm { }; /* -Caller Mode: Infra - -a. algorithm: wep40, wep104, tkip & aes -b. keytype: grp key/unicast key -c. key contents - -when shared key ==> keyid is the camid -when 802.1x ==> keyid [0:1] ==> grp key -when 802.1x ==> keyid > 2 ==> unicast key - -*/ + * Caller Mode: Infra + * + * a. algorithm: wep40, wep104, tkip & aes + * b. keytype: grp key/unicast key + * c. key contents + * + * when shared key ==> keyid is the camid + * when 802.1x ==> keyid [0:1] ==> grp key + * when 802.1x ==> keyid > 2 ==> unicast key + * + */ struct setkey_parm { u8 algorithm; /* could be none, wep40, TKIP, CCMP, wep104 */ u8 keyid; u8 grpkey; /* 1: this is the grpkey for 802.1x. - * 0: this is the unicast key for 802.1x */ + * 0: this is the unicast key for 802.1x + */ u8 set_tx; /* 1: main tx key for wep. 0: other key. */ u8 key[16]; /* this could be 40 or 104 */ }; /* -When in AP or Ad-Hoc mode, this is used to -allocate an sw/hw entry for a newly associated sta. - -Command - -when shared key ==> algorithm/keyid - -*/ + * When in AP or Ad-Hoc mode, this is used to + * allocate an sw/hw entry for a newly associated sta. + * + * Command + * + * when shared key ==> algorithm/keyid + * + */ struct set_stakey_parm { u8 addr[ETH_ALEN]; u8 algorithm; u8 id;/* currently for erasing cam entry if - * algorithm == _NO_PRIVACY_ */ + * algorithm == _NO_PRIVACY_ + */ u8 key[16]; }; @@ -191,15 +193,15 @@ struct set_stakey_rsp { }; /* -Caller Ad-Hoc/AP - -Command -Rsp(AID == CAMID) mode - -This is to force fw to add an sta_data entry per driver's request. - -FW will write an cam entry associated with it. - -*/ + * Caller Ad-Hoc/AP + * + * Command -Rsp(AID == CAMID) mode + * + * This is to force fw to add an sta_data entry per driver's request. + * + * FW will write an cam entry associated with it. + * + */ struct set_assocsta_parm { u8 addr[ETH_ALEN]; }; @@ -210,55 +212,57 @@ struct set_assocsta_rsp { }; /* - Notes: This command is used for H2C/C2H loopback testing - - mac[0] == 0 - ==> CMD mode, return H2C_SUCCESS. - The following condition must be true under CMD mode - mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0; - s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7; - s2 == (b1 << 8 | b0); - - mac[0] == 1 - ==> CMD_RSP mode, return H2C_SUCCESS_RSP - - The rsp layout shall be: - rsp: parm: - mac[0] = mac[5]; - mac[1] = mac[4]; - mac[2] = mac[3]; - mac[3] = mac[2]; - mac[4] = mac[1]; - mac[5] = mac[0]; - s0 = s1; - s1 = swap16(s0); - w0 = swap32(w1); - b0 = b1 - s2 = s0 + s1 - b1 = b0 - w1 = w0 - - mac[0] == 2 - ==> CMD_EVENT mode, return H2C_SUCCESS - The event layout shall be: - event: parm: - mac[0] = mac[5]; - mac[1] = mac[4]; - mac[2] = event's seq no, starting from 1 to parm's marc[3] - mac[3] = mac[2]; - mac[4] = mac[1]; - mac[5] = mac[0]; - s0 = swap16(s0) - event.mac[2]; - s1 = s1 + event.mac[2]; - w0 = swap32(w0); - b0 = b1 - s2 = s0 + event.mac[2] - b1 = b0 - w1 = swap32(w1) - event.mac[2]; - - parm->mac[3] is the total event counts that host requested. - event will be the same with the cmd's param. -*/ + * Notes: This command is used for H2C/C2H loopback testing + * + * mac[0] == 0 + * ==> CMD mode, return H2C_SUCCESS. + * The following condition must be true under CMD mode + * mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0; + * s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7; + * s2 == (b1 << 8 | b0); + * + * mac[0] == 1 + * ==> CMD_RSP mode, return H2C_SUCCESS_RSP + * + * The rsp layout shall be: + * rsp: parm: + * mac[0] = mac[5]; + * mac[1] = mac[4]; + * mac[2] = mac[3]; + * mac[3] = mac[2]; + * mac[4] = mac[1]; + * mac[5] = mac[0]; + * s0 = s1; + * s1 = swap16(s0); + * w0 = swap32(w1); + * b0 = b1 + * s2 = s0 + s1 + * b1 = b0 + * w1 = w0 + * + * mac[0] == 2 + * ==> CMD_EVENT mode, return H2C_SUCCESS + * The event layout shall be: + * event: parm: + * mac[0] = mac[5]; + * mac[1] = mac[4]; + * mac[2] = event's seq no, starting from 1 to parm's marc[3] + * mac[2] = event's seq no, starting from 1 to parm's marc[3] + * mac[2] = event's seq no, starting from 1 to parm's marc[3] + * mac[3] = mac[2]; + * mac[4] = mac[1]; + * mac[5] = mac[0]; + * s0 = swap16(s0) - event.mac[2]; + * s1 = s1 + event.mac[2]; + * w0 = swap32(w0); + * b0 = b1 + * s2 = s0 + event.mac[2] + * b1 = b0 + * w1 = swap32(w1) - event.mac[2]; + * + * parm->mac[3] is the total event counts that host requested. + * event will be the same with the cmd's param. + */ /* CMD param Format for driver extra cmd handler */ struct drvextra_cmd_parm { @@ -285,15 +289,15 @@ struct SetChannelPlan_param { }; /* - -Result: -0x00: success -0x01: success, and check Response. -0x02: cmd ignored due to duplicated sequcne number -0x03: cmd dropped due to invalid cmd code -0x04: reserved. - -*/ + * + * Result: + * 0x00: success + * 0x01: success, and check Response. + * 0x02: cmd ignored due to duplicated sequcne number + * 0x03: cmd dropped due to invalid cmd code + * 0x04: reserved. + * + */ #define H2C_SUCCESS 0x00 #define H2C_SUCCESS_RSP 0x01 diff --git a/drivers/staging/rtl8188eu/include/rtw_eeprom.h b/drivers/staging/rtl8188eu/include/rtw_eeprom.h index 5dd73841dd9e..11d1cb6de506 100644 --- a/drivers/staging/rtl8188eu/include/rtw_eeprom.h +++ b/drivers/staging/rtl8188eu/include/rtw_eeprom.h @@ -55,7 +55,8 @@ /* This variable is initiailzed through EEPROM or registry, */ /* however, its definition may be different with that in EEPROM for */ /* EEPROM size consideration. So, we have to perform proper translation - * between them. */ + * between them. + */ /* Besides, CustomerID of registry has precedence of that of EEPROM. */ /* defined below. 060703, by rcnjko. */ enum RT_CUSTOMER_ID { @@ -79,7 +80,8 @@ enum RT_CUSTOMER_ID { RT_CID_819x_Sitecom = 17, RT_CID_CCX = 18, /* It's set under CCX logo test and isn't demanded * for CCX functions, but for test behavior like retry - * limit and tx report. By Bruce, 2009-02-17. */ + * limit and tx report. By Bruce, 2009-02-17. + */ RT_CID_819x_Lenovo = 19, RT_CID_819x_QMI = 20, RT_CID_819x_Edimax_Belkin = 21, @@ -89,7 +91,8 @@ enum RT_CUSTOMER_ID { RT_CID_819x_Acer = 25, RT_CID_819x_AzWave_ASUS = 26, RT_CID_819x_AzWave = 27, /* For AzWave in PCIe,i - * The ID is AzWave use and not only Asus */ + * The ID is AzWave use and not only Asus + */ RT_CID_819x_HP = 28, RT_CID_819x_WNC_COREGA = 29, RT_CID_819x_Arcadyan_Belkin = 30, diff --git a/drivers/staging/rtl8188eu/include/rtw_event.h b/drivers/staging/rtl8188eu/include/rtw_event.h index 1c5ebde97091..e798e794d962 100644 --- a/drivers/staging/rtl8188eu/include/rtw_event.h +++ b/drivers/staging/rtl8188eu/include/rtw_event.h @@ -22,42 +22,42 @@ #include <linux/sem.h> /* -Used to report a bss has been scanned -*/ + * Used to report a bss has been scanned + */ struct survey_event { struct wlan_bssid_ex bss; }; /* -Used to report that the requested site survey has been done. - -bss_cnt indicates the number of bss that has been reported. - - -*/ + * Used to report that the requested site survey has been done. + * + * bss_cnt indicates the number of bss that has been reported. + * + * + */ struct surveydone_event { unsigned int bss_cnt; }; /* -Used to report the link result of joinning the given bss - - -join_res: --1: authentication fail --2: association fail -> 0: TID - -*/ + * Used to report the link result of joinning the given bss + * + * + * join_res: + * -1: authentication fail + * -2: association fail + * > 0: TID + * + */ struct joinbss_event { struct wlan_network network; }; /* -Used to report a given STA has joinned the created BSS. -It is used in AP/Ad-HoC(M) mode. -*/ + * Used to report a given STA has joinned the created BSS. + * It is used in AP/Ad-HoC(M) mode. + */ struct stassoc_event { unsigned char macaddr[6]; diff --git a/drivers/staging/rtl8188eu/include/rtw_led.h b/drivers/staging/rtl8188eu/include/rtw_led.h index 0d07a4eff7e3..884e1397755a 100644 --- a/drivers/staging/rtl8188eu/include/rtw_led.h +++ b/drivers/staging/rtl8188eu/include/rtw_led.h @@ -58,7 +58,8 @@ struct LED_871x { enum LED_STATE_871x CurrLedState; /* Current LED state. */ enum LED_STATE_871x BlinkingLedState; /* Next state for blinking, - * either RTW_LED_ON or RTW_LED_OFF are. */ + * either RTW_LED_ON or RTW_LED_OFF are. + */ u8 bLedOn; /* true if LED is ON, false if LED is OFF. */ @@ -75,7 +76,8 @@ struct LED_871x { u8 bLedLinkBlinkInProgress; u8 bLedScanBlinkInProgress; struct work_struct BlinkWorkItem; /* Workitem used by BlinkTimer to - * manipulate H/W to blink LED. */ + * manipulate H/W to blink LED. + */ }; #define IS_LED_WPS_BLINKING(_LED_871x) \ diff --git a/drivers/staging/rtl8188eu/include/rtw_mlme.h b/drivers/staging/rtl8188eu/include/rtw_mlme.h index eff7b84b9579..e6d4175af3a2 100644 --- a/drivers/staging/rtl8188eu/include/rtw_mlme.h +++ b/drivers/staging/rtl8188eu/include/rtw_mlme.h @@ -70,25 +70,28 @@ enum rt_scan_type { enum SCAN_RESULT_TYPE { SCAN_RESULT_P2P_ONLY = 0, /* Will return all the P2P devices. */ SCAN_RESULT_ALL = 1, /* Will return all the scanned device, - * include AP. */ + * include AP. + */ SCAN_RESULT_WFD_TYPE = 2 /* Will just return the correct WFD - * device. */ + * device. + */ /* If this device is Miracast sink * device, it will just return all the - * Miracast source devices. */ + * Miracast source devices. + */ }; /* -there are several "locks" in mlme_priv, -since mlme_priv is a shared resource between many threads, -like ISR/Call-Back functions, the OID handlers, and even timer functions. - -Each _queue has its own locks, already. -Other items are protected by mlme_priv.lock. - -To avoid possible dead lock, any thread trying to modifiying mlme_priv -SHALL not lock up more than one lock at a time! -*/ + * there are several "locks" in mlme_priv, + * since mlme_priv is a shared resource between many threads, + * like ISR/Call-Back functions, the OID handlers, and even timer functions. + * + * Each _queue has its own locks, already. + * Other items are protected by mlme_priv.lock. + * + * To avoid possible dead lock, any thread trying to modifiying mlme_priv + * SHALL not lock up more than one lock at a time! + */ #define traffic_threshold 10 #define traffic_scan_period 500 @@ -102,9 +105,11 @@ struct rt_link_detect { bool bRxBusyTraffic; bool bHigherBusyTraffic; /* For interrupt migration purpose. */ bool bHigherBusyRxTraffic; /* We may disable Tx interrupt according - * to Rx traffic. */ + * to Rx traffic. + */ bool bHigherBusyTxTraffic; /* We may disable Tx interrupt according - * to Tx traffic. */ + * to Tx traffic. + */ }; struct mlme_priv { @@ -164,7 +169,8 @@ struct mlme_priv { #if defined(CONFIG_88EU_AP_MODE) /* Number of associated Non-ERP stations (i.e., stations using 802.11b - * in 802.11g BSS) */ + * in 802.11g BSS) + */ int num_sta_non_erp; /* Number of associated stations that do not support Short Slot Time */ diff --git a/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h b/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h index f8b9fc2b586a..118bf5509d97 100644 --- a/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h +++ b/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h @@ -101,9 +101,11 @@ extern unsigned char WMM_PARA_OUI[]; /* Channel Plan Type. */ /* Note: */ /* We just add new channel plan when the new channel plan is different - * from any of the following channel plan. */ + * from any of the following channel plan. + */ /* If you just want to customize the actions(scan period or join actions) - * about one of the channel plan, */ + * about one of the channel plan, + */ /* customize them in struct rt_channel_info in the RT_CHANNEL_LIST. */ enum RT_CHANNEL_DOMAIN { /* old channel plan mapping ===== */ @@ -319,7 +321,8 @@ struct mlme_ext_info { u32 authModeToggle; u32 enc_algo;/* encrypt algorithm; */ u32 key_index; /* this is only valid for legacy wep, - * 0~3 for key id. */ + * 0~3 for key id. + */ u32 iv; u8 chg_txt[128]; u16 aid; @@ -353,16 +356,19 @@ struct mlme_ext_info { struct HT_info_element HT_info; struct wlan_bssid_ex network;/* join network or bss_network, * if in ap mode, it is the same - * as cur_network.network */ + * as cur_network.network + */ struct FW_Sta_Info FW_sta_info[NUM_STA]; }; /* The channel information about this channel including joining, - * scanning, and power constraints. */ + * scanning, and power constraints. + */ struct rt_channel_info { u8 ChannelNum; /* The channel number. */ enum rt_scan_type ScanType; /* Scan type such as passive - * or active scan. */ + * or active scan. + */ u32 rx_count; }; @@ -413,7 +419,8 @@ struct mlme_ext_priv { unsigned char cur_wireless_mode; /* NETWORK_TYPE */ unsigned char oper_channel; /* saved chan info when call - * set_channel_bw */ + * set_channel_bw + */ unsigned char oper_bwmode; unsigned char oper_ch_offset;/* PRIME_CHNL_OFFSET */ @@ -427,7 +434,8 @@ struct mlme_ext_priv { struct mlme_ext_info mlmext_info;/* for sta/adhoc mode, including * current scan/connecting/connected * related info. For ap mode, - * network includes ap's cap_info*/ + * network includes ap's cap_info + */ struct timer_list survey_timer; struct timer_list link_timer; u16 chan_scan_time; @@ -690,7 +698,8 @@ enum rtw_c2h_event { _C2HBCN_EVT_, _ReportPwrState_EVT_, /* filen: only for PCIE, USB */ _CloseRF_EVT_, /* filen: only for PCIE, - * work around ASPM */ + * work around ASPM + */ MAX_C2HEVT }; diff --git a/drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h b/drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h index 4872a21b3103..aa353aefed3d 100644 --- a/drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h +++ b/drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h @@ -521,14 +521,16 @@ #define bCCKRxPhase 0x4 #if (RTL92SE_FPGA_VERIFY == 1) #define bLSSIReadAddress 0x3f000000 /* LSSI "Read" Address - Reg 0x824 rFPGA0_XA_HSSIParameter2 */ + * Reg 0x824 rFPGA0_XA_HSSIParameter2 + */ #else #define bLSSIReadAddress 0x7f800000 /* T65 RF */ #endif #define bLSSIReadEdge 0x80000000 /* LSSI "Read" edge signal */ #if (RTL92SE_FPGA_VERIFY == 1) #define bLSSIReadBackData 0xfff /* Reg 0x8a0 - rFPGA0_XA_LSSIReadBack */ + * rFPGA0_XA_LSSIReadBack + */ #else #define bLSSIReadBackData 0xfffff /* T65 RF */ #endif @@ -548,13 +550,16 @@ #define bDA6Swing 0x380000 #define bADClkPhase 0x4000000 /* Reg 0x880 - rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ */ + * rFPGA0_AnalogParameter1 20/40 CCK + * support switch 40/80 BB MHZ + */ #define b80MClkDelay 0x18000000 /* Useless */ #define bAFEWatchDogEnable 0x20000000 #define bXtalCap01 0xc0000000 /* Reg 0x884 - rFPGA0_AnalogParameter2 Crystal cap */ + * rFPGA0_AnalogParameter2 Crystal cap + */ #define bXtalCap23 0x3 #define bXtalCap92x 0x0f000000 #define bXtalCap 0x0f000000 @@ -598,7 +603,8 @@ #define bCCKTxOn 0x1 #define bOFDMTxOn 0x2 #define bDebugPage 0xfff /* reset debug page and HWord, - * LWord */ + * LWord + */ #define bDebugItem 0xff /* reset debug page and LWord */ #define bAntL 0x10 #define bAntNonHT 0x100 @@ -1071,7 +1077,8 @@ #define RCR_EnCS1 BIT(29) /* enable carrier sense method 1 */ #define RCR_EnCS2 BIT(30) /* enable carrier sense method 2 */ #define RCR_OnlyErlPkt BIT(31) /* Rx Early mode is performed for - * packet size greater than 1536 */ + * packet size greater than 1536 + */ /*--------------------------Define Parameters-------------------------------*/ diff --git a/drivers/staging/rtl8188eu/include/rtw_pwrctrl.h b/drivers/staging/rtl8188eu/include/rtw_pwrctrl.h index 18a9e744fcbe..f39e90cfc031 100644 --- a/drivers/staging/rtl8188eu/include/rtw_pwrctrl.h +++ b/drivers/staging/rtl8188eu/include/rtw_pwrctrl.h @@ -51,11 +51,11 @@ enum power_mgnt { }; /* - BIT[2:0] = HW state - BIT[3] = Protocol PS state, 0: register active state, - 1: register sleep state - BIT[4] = sub-state -*/ + * BIT[2:0] = HW state + * BIT[3] = Protocol PS state, 0: register active state, + * 1: register sleep state + * BIT[4] = sub-state + */ #define PS_DPS BIT(0) #define PS_LCLK (PS_DPS) @@ -115,9 +115,11 @@ enum rt_rf_power_state { #define RT_RF_OFF_LEVL_FREE_FW BIT(4) /* FW free, re-download the FW*/ #define RT_RF_OFF_LEVL_FW_32K BIT(5) /* FW in 32k */ #define RT_RF_PS_LEVEL_ALWAYS_ASPM BIT(6) /* Always enable ASPM and Clock - * Req in initialization. */ + * Req in initialization. + */ #define RT_RF_LPS_DISALBE_2R BIT(30) /* When LPS is on, disable 2R - * if no packet is RX or TX. */ + * if no packet is RX or TX. + */ #define RT_RF_LPS_LEVEL_ASPM BIT(31) /* LPS with ASPM */ #define RT_IN_PS_LEVEL(ppsc, _PS_FLAG) \ @@ -145,7 +147,8 @@ struct pwrctrl_priv { struct mutex mutex_lock; volatile u8 rpwm; /* requested power state for fw */ volatile u8 cpwm; /* fw current power state. updated when - * 1. read from HCPWM 2. driver lowers power level */ + * 1. read from HCPWM 2. driver lowers power level + */ volatile u8 tog; /* toggling */ volatile u8 cpwm_tog; /* toggling */ @@ -170,7 +173,8 @@ struct pwrctrl_priv { u8 ips_mode; u8 ips_mode_req; /* used to accept the mode setting request, - * will update to ipsmode later */ + * will update to ipsmode later + */ uint bips_processing; unsigned long ips_deny_time; /* will deny IPS when system time less than this */ u8 ps_processing; /* temp used to mark whether in rtw_ps_processor */ diff --git a/drivers/staging/rtl8188eu/include/rtw_qos.h b/drivers/staging/rtl8188eu/include/rtw_qos.h index 45a77f6f8427..576dff68d0dc 100644 --- a/drivers/staging/rtl8188eu/include/rtw_qos.h +++ b/drivers/staging/rtl8188eu/include/rtw_qos.h @@ -19,7 +19,8 @@ struct qos_priv { unsigned int qos_option; /* bit mask option: u-apsd, - * s-apsd, ts, block ack... */ + * s-apsd, ts, block ack... + */ }; #endif /* _RTL871X_QOS_H_ */ diff --git a/drivers/staging/rtl8188eu/include/rtw_recv.h b/drivers/staging/rtl8188eu/include/rtw_recv.h index e9e97fd20dba..7e85f700acb3 100644 --- a/drivers/staging/rtl8188eu/include/rtw_recv.h +++ b/drivers/staging/rtl8188eu/include/rtw_recv.h @@ -46,23 +46,23 @@ struct recv_reorder_ctrl { struct stainfo_rxcache { u16 tid_rxseq[16]; /* - unsigned short tid0_rxseq; - unsigned short tid1_rxseq; - unsigned short tid2_rxseq; - unsigned short tid3_rxseq; - unsigned short tid4_rxseq; - unsigned short tid5_rxseq; - unsigned short tid6_rxseq; - unsigned short tid7_rxseq; - unsigned short tid8_rxseq; - unsigned short tid9_rxseq; - unsigned short tid10_rxseq; - unsigned short tid11_rxseq; - unsigned short tid12_rxseq; - unsigned short tid13_rxseq; - unsigned short tid14_rxseq; - unsigned short tid15_rxseq; -*/ + * unsigned short tid0_rxseq; + * unsigned short tid1_rxseq; + * unsigned short tid2_rxseq; + * unsigned short tid3_rxseq; + * unsigned short tid4_rxseq; + * unsigned short tid5_rxseq; + * unsigned short tid6_rxseq; + * unsigned short tid7_rxseq; + * unsigned short tid8_rxseq; + * unsigned short tid9_rxseq; + * unsigned short tid10_rxseq; + * unsigned short tid11_rxseq; + * unsigned short tid12_rxseq; + * unsigned short tid13_rxseq; + * unsigned short tid14_rxseq; + * unsigned short tid15_rxseq; + */ }; struct signal_stat { @@ -79,7 +79,8 @@ struct phy_info { u8 RxMIMOSignalStrength[MAX_PATH_NUM_92CS];/* in 0~100 index */ s8 RxPower; /* in dBm Translate from PWdB */ /* Real power in dBm for this packet, no beautification and aggregation. - * Keep this raw info to be used for the other procedures. */ + * Keep this raw info to be used for the other procedures. + */ s8 recvpower; u8 BTRxRSSIPercentage; u8 SignalStrength; /* in 0-100 index. */ @@ -106,7 +107,8 @@ struct rx_pkt_attrib { u8 privacy; /* in frame_ctrl field */ u8 bdecrypted; u8 encrypt; /* when 0 indicate no encrypt. when non-zero, - * indicate the encrypt algorithm */ + * indicate the encrypt algorithm + */ u8 iv_len; u8 icv_len; u8 crc_err; @@ -152,12 +154,12 @@ struct recv_stat { }; /* -accesser of recv_priv: rtw_recv_entry(dispatch / passive level); -recv_thread(passive) ; returnpkt(dispatch) -; halt(passive) ; - -using enter_critical section to protect -*/ + * accesser of recv_priv: rtw_recv_entry(dispatch / passive level); + * recv_thread(passive) ; returnpkt(dispatch) + * ; halt(passive) ; + * + * using enter_critical section to protect + */ struct recv_priv { struct __queue free_recv_queue; struct __queue recv_pending_queue; @@ -209,20 +211,20 @@ struct recv_buf { }; /* - head -----> - - data -----> - - payload - - tail -----> - - - end -----> - - len = (unsigned int )(tail - data); - -*/ + * head -----> + * + * data -----> + * + * payload + * + * tail -----> + * + * + * end -----> + * + * len = (unsigned int )(tail - data); + * + */ struct recv_frame { struct list_head list; struct sk_buff *pkt; diff --git a/drivers/staging/rtl8188eu/include/rtw_rf.h b/drivers/staging/rtl8188eu/include/rtw_rf.h index 66896af02042..0718a29e7c9d 100644 --- a/drivers/staging/rtl8188eu/include/rtw_rf.h +++ b/drivers/staging/rtl8188eu/include/rtw_rf.h @@ -31,7 +31,8 @@ #define RTL8711_RF_DEF_SENS 4 /* We now define the following channels as the max channels in each - * channel plan. */ + * channel plan. + */ /* 2G, total 14 chnls */ /* {1,2,3,4,5,6,7,8,9,10,11,12,13,14} */ #define MAX_CHANNEL_NUM_2G 14 @@ -65,7 +66,8 @@ enum capability { cChannelAgility = 0x0080, cSpectrumMgnt = 0x0100, cQos = 0x0200, /* For HCCA, use with CF-Pollable - * and CF-PollReq */ + * and CF-PollReq + */ cShortSlotTime = 0x0400, cAPSD = 0x0800, cRM = 0x1000, /* RRM (Radio Request Measurement) */ diff --git a/drivers/staging/rtl8188eu/include/rtw_security.h b/drivers/staging/rtl8188eu/include/rtw_security.h index 74fe664787e5..a0c6cf706218 100644 --- a/drivers/staging/rtl8188eu/include/rtw_security.h +++ b/drivers/staging/rtl8188eu/include/rtw_security.h @@ -100,20 +100,26 @@ struct rt_pmkid_list { struct security_priv { u32 dot11AuthAlgrthm; /* 802.11 auth, could be open, - * shared, 8021x and authswitch */ + * shared, 8021x and authswitch + */ u32 dot11PrivacyAlgrthm; /* This specify the privacy for - * shared auth. algorithm. */ + * shared auth. algorithm. + */ /* WEP */ u32 dot11PrivacyKeyIndex; /* this is only valid for legendary - * wep, 0~3 for key id.(tx key index) */ + * wep, 0~3 for key id.(tx key index) + */ union Keytype dot11DefKey[4]; /* this is only valid for def. key */ u32 dot11DefKeylen[4]; u32 dot118021XGrpPrivacy; /* This specify the privacy algthm. - * used for Grp key */ + * used for Grp key + */ u32 dot118021XGrpKeyid; /* key id used for Grp Key - * ( tx key index) */ + * ( tx key index) + */ union Keytype dot118021XGrpKey[4]; /* 802.1x Group Key, - * for inx0 and inx1 */ + * for inx0 and inx1 + */ union Keytype dot118021XGrptxmickey[4]; union Keytype dot118021XGrprxmickey[4]; union pn48 dot11Grptxpn; /* PN48 used for Grp Key xmit.*/ @@ -134,10 +140,12 @@ struct security_priv { u8 bcheck_grpkey; u8 bgrpkey_handshake; s32 hw_decrypted;/* if the rx packets is hw_decrypted==false,i - * it means the hw has not been ready. */ + * it means the hw has not been ready. + */ /* keeps the auth_type & enc_status from upper layer - * ioctl(wpa_supplicant or wzc) */ + * ioctl(wpa_supplicant or wzc) + */ u32 ndisauthtype; /* NDIS_802_11_AUTHENTICATION_MODE */ u32 ndisencryptstatus; /* NDIS_802_11_ENCRYPTION_STATUS */ struct wlan_bssid_ex sec_bss; /* for joinbss (h2c buffer) usage */ @@ -256,7 +264,8 @@ static inline u32 rotr(u32 val, int bits) /* ===== start - public domain SHA256 implementation ===== */ /* This is based on SHA256 implementation in LibTomCrypt that was released into - * public domain by Tom St Denis. */ + * public domain by Tom St Denis. + */ /* the K array */ static const unsigned long K[64] = { diff --git a/drivers/staging/rtl8188eu/include/rtw_xmit.h b/drivers/staging/rtl8188eu/include/rtw_xmit.h index dd6b7a9a8d4a..b4b3d13ace9e 100644 --- a/drivers/staging/rtl8188eu/include/rtw_xmit.h +++ b/drivers/staging/rtl8188eu/include/rtw_xmit.h @@ -115,11 +115,13 @@ struct pkt_attrib { u16 seqnum; u16 hdrlen; /* the WLAN Header Len */ u32 pktlen; /* the original 802.3 pkt raw_data len (not include - * ether_hdr data) */ + * ether_hdr data) + */ u32 last_txcmdsz; u8 nr_frags; u8 encrypt; /* when 0 indicate no encrypt. when non-zero, - * indicate the encrypt algorith */ + * indicate the encrypt algorith + */ u8 iv_len; u8 icv_len; u8 iv[18]; @@ -234,7 +236,8 @@ struct sta_xmit_priv { spinlock_t lock; int option; int apsd_setting; /* When bit mask is on, the associated edca - * queue supports APSD. */ + * queue supports APSD. + */ struct tx_servq be_q; /* priority == 0,3 */ struct tx_servq bk_q; /* priority == 1,2 */ struct tx_servq vi_q; /* priority == 4,5 */ @@ -280,7 +283,8 @@ struct xmit_priv { u8 hwxmit_entry; u8 wmm_para_seq[4];/* sequence for wmm ac parameter strength * from large to small. it's value is 0->vo, - * 1->vi, 2->be, 3->bk. */ + * 1->vi, 2->be, 3->bk. + */ u8 txirp_cnt;/* */ struct tasklet_struct xmit_tasklet; /* per AC pending irp */ diff --git a/drivers/staging/rtl8188eu/include/sta_info.h b/drivers/staging/rtl8188eu/include/sta_info.h index 42a035123365..8f01deed6e4a 100644 --- a/drivers/staging/rtl8188eu/include/sta_info.h +++ b/drivers/staging/rtl8188eu/include/sta_info.h @@ -126,7 +126,8 @@ struct sta_info { /* Notes: */ /* STA_Mode: */ /* curr_network(mlme_priv/security_priv/qos/ht) + - * sta_info: (STA & AP) CAP/INFO */ + * sta_info: (STA & AP) CAP/INFO + */ /* scan_q: AP CAP/INFO */ /* AP_Mode: */ @@ -184,7 +185,8 @@ struct sta_info { /* ================ODM Relative Info======================= */ /* Please be careful, don't declare too much structure here. - * It will cost memory * STA support num. */ + * It will cost memory * STA support num. + */ /* 2011/10/20 MH Add for ODM STA info. */ /* Driver Write */ u8 bValid; /* record the sta status link or not? */ @@ -318,9 +320,11 @@ struct sta_priv { struct sta_info *sta_aid[NUM_STA]; u16 sta_dz_bitmap;/* only support 15 stations, station aid bitmap - * for sleeping sta. */ + * for sleeping sta. + */ u16 tim_bitmap; /* only support 15 stations, aid=0~15 mapping - * bit0~bit15 */ + * bit0~bit15 + */ u16 max_num_sta; diff --git a/drivers/staging/rtl8188eu/include/wifi.h b/drivers/staging/rtl8188eu/include/wifi.h index cb46d353327b..084a246eec19 100644 --- a/drivers/staging/rtl8188eu/include/wifi.h +++ b/drivers/staging/rtl8188eu/include/wifi.h @@ -35,7 +35,8 @@ /* This value is tested by WiFi 11n Test Plan 5.2.3. */ /* This test verifies the WLAN NIC can update the NAV through sending - * the CTS with large duration. */ + * the CTS with large duration. + */ #define WiFiNavUpperUs 30000 /* 30 ms */ enum WIFI_FRAME_TYPE { @@ -459,14 +460,14 @@ static inline int IsFrameTypeCtrl(unsigned char *pframe) #define _IEEE8021X_PSK_ 2 /* WPA with pre-shared key */ /* -#define _NO_PRIVACY_ 0 -#define _WEP_40_PRIVACY_ 1 -#define _TKIP_PRIVACY_ 2 -#define _WRAP_PRIVACY_ 3 -#define _CCMP_PRIVACY_ 4 -#define _WEP_104_PRIVACY_ 5 -#define _WEP_WPA_MIXED_PRIVACY_ 6 WEP + WPA -*/ + * #define _NO_PRIVACY_ 0 + * #define _WEP_40_PRIVACY_ 1 + * #define _TKIP_PRIVACY_ 2 + * #define _WRAP_PRIVACY_ 3 + * #define _CCMP_PRIVACY_ 4 + * #define _WEP_104_PRIVACY_ 5 + * #define _WEP_WPA_MIXED_PRIVACY_ 6 WEP + WPA + */ /*----------------------------------------------------------------------------- Below is the definition for WMM @@ -771,10 +772,12 @@ enum ht_cap_ampdu_factor { #define P2P_PROVISIONING_SCAN_CNT 3 /* default value, used when: (1)p2p disabled or (2)p2p enabled - * but only do 1 scan phase */ + * but only do 1 scan phase + */ #define P2P_FINDPHASE_EX_NONE 0 /* used when p2p enabled and want to do 1 scan phase and - * P2P_FINDPHASE_EX_MAX-1 find phase */ + * P2P_FINDPHASE_EX_MAX-1 find phase + */ #define P2P_FINDPHASE_EX_FULL 1 #define P2P_FINDPHASE_EX_SOCIAL_FIRST (P2P_FINDPHASE_EX_FULL+1) #define P2P_FINDPHASE_EX_MAX 4 diff --git a/drivers/staging/rtl8188eu/include/wlan_bssdef.h b/drivers/staging/rtl8188eu/include/wlan_bssdef.h index e1931dd04da0..d7b25d2f933a 100644 --- a/drivers/staging/rtl8188eu/include/wlan_bssdef.h +++ b/drivers/staging/rtl8188eu/include/wlan_bssdef.h @@ -86,7 +86,8 @@ struct ndis_802_11_var_ie { * + NDIS_802_11_LENGTH_RATES_EX + IELength * * Except the IELength, all other fields are fixed length. - * Therefore, we can define a macro to represent the partial sum. */ + * Therefore, we can define a macro to represent the partial sum. + */ enum ndis_802_11_auth_mode { Ndis802_11AuthModeOpen, @@ -130,7 +131,8 @@ enum ndis_802_11_reload_def { struct ndis_802_11_wep { u32 Length; /* Length of this structure */ u32 KeyIndex; /* 0 is the per-client key, - * 1-N are the global keys */ + * 1-N are the global keys + */ u32 KeyLength; /* length of key in bytes */ u8 KeyMaterial[16];/* variable len depending on above field */ }; @@ -140,7 +142,8 @@ enum ndis_802_11_status_type { Ndis802_11StatusType_MediaStreamMode, Ndis802_11StatusType_PMKID_CandidateList, Ndis802_11StatusTypeMax /* not a real type, defined as - * an upper bound */ + * an upper bound + */ }; /* mask for authentication/integrity fields */ @@ -166,7 +169,8 @@ struct wlan_phy_info { struct wlan_bcn_info { /* these infor get from rtw_get_encrypt_info when - * * translate scan to UI */ + * * translate scan to UI + */ u8 encryp_protocol;/* ENCRYP_PROTOCOL_E: OPEN/WEP/WPA/WPA2/WAPI */ int group_cipher; /* WPA/WPA2 group cipher */ int pairwise_cipher;/* WPA/WPA2/WEP pairwise cipher */ @@ -178,8 +182,8 @@ struct wlan_bcn_info { }; /* temporally add #pragma pack for structure alignment issue of -* struct wlan_bssid_ex and get_struct wlan_bssid_ex_sz() -*/ + * struct wlan_bssid_ex and get_struct wlan_bssid_ex_sz() + */ struct wlan_bssid_ex { u32 Length; unsigned char MacAddress[ETH_ALEN]; @@ -194,7 +198,8 @@ struct wlan_bssid_ex { struct wlan_phy_info PhyInfo; u32 IELength; u8 IEs[MAX_IE_SZ]; /* timestamp, beacon interval, and - * capability information) */ + * capability information) + */ } __packed; static inline uint get_wlan_bssid_ex_sz(struct wlan_bssid_ex *bss) @@ -206,7 +211,8 @@ struct wlan_network { struct list_head list; int network_type; /* refer to ieee80211.h for WIRELESS_11A/B/G */ int fixed; /* set fixed when not to be removed - * in site-surveying */ + * in site-surveying + */ unsigned long last_scanned; /* timestamp for the network */ int aid; /* will only be valid when a BSS is joinned. */ int join_res; |