Merge branch 'linus' into tracing/core

Merge reason: Pick up kernel/softirq.c update for dependent fix.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 2 insertions, 111 deletions

diff --git a/drivers/staging/rtl8192su/r819xU_cmdpkt.c b/drivers/staging/rtl8192su/r819xU_cmdpkt.c
index c1149c6f77bc..e2ba93e30757 100644
--- a/drivers/staging/rtl8192su/r819xU_cmdpkt.c
+++ b/drivers/staging/rtl8192su/r819xU_cmdpkt.c
@@ -108,84 +108,7 @@ SendTxCommandPacket(
 {
 
 	bool 	    rt_status = true;
-#ifdef RTL8192SU
 	return rt_status;
-#else
-#ifdef RTL8192U
-	return rt_status;
-#else
-	struct r8192_priv   *priv = ieee80211_priv(dev);
-	u16		    frag_threshold;
-	u16		    frag_length, frag_offset = 0;
-	//u16		    total_size;
-	//int		    i;
-
-	rt_firmware	    *pfirmware = priv->pFirmware;
-	struct sk_buff	    *skb;
-	unsigned char	    *seg_ptr;
-	cb_desc		    *tcb_desc;
-	u8                  bLastIniPkt;
-
-	firmware_init_param(dev);
-	//Fragmentation might be required
-	frag_threshold = pfirmware->cmdpacket_frag_thresold;
-	do {
-		if((buffer_len - frag_offset) > frag_threshold) {
-			frag_length = frag_threshold ;
-			bLastIniPkt = 0;
-
-		} else {
-			frag_length = buffer_len - frag_offset;
-			bLastIniPkt = 1;
-
-		}
-
-		/* Allocate skb buffer to contain firmware info and tx descriptor info
-		 * add 4 to avoid packet appending overflow.
-		 * */
-		#ifdef RTL8192U
-		skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
-		#else
-		skb  = dev_alloc_skb(frag_length + 4);
-		#endif
-		memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
-		tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
-		tcb_desc->queue_index = TXCMD_QUEUE;
-		tcb_desc->bCmdOrInit = packettype;
-		tcb_desc->bLastIniPkt = bLastIniPkt;
-
-		#ifdef RTL8192U
-		skb_reserve(skb, USB_HWDESC_HEADER_LEN);
-		#endif
-
-		seg_ptr = skb_put(skb, buffer_len);
-		/*
-		 * Transform from little endian to big endian
-                 * and pending  zero
-		 */
-		memcpy(seg_ptr,codevirtualaddress,buffer_len);
-		tcb_desc->txbuf_size= (u16)buffer_len;
-
-
-		if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
-			(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
-			(priv->ieee80211->queue_stop) ) {
-			RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
-			skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
-		} else {
-			priv->ieee80211->softmac_hard_start_xmit(skb,dev);
-		}
-
-		codevirtualaddress += frag_length;
-		frag_offset += frag_length;
-
-	}while(frag_offset < buffer_len);
-
-	return rt_status;
-
-
-#endif
-#endif
 }	/* CMPK_Message_Handle_Tx */
 
 /*-----------------------------------------------------------------------------
@@ -319,45 +242,13 @@ cmpk_handle_tx_feedback(
 	//cmpk_Display_Message(CMPK_RX_TX_FB_SIZE, pMsg);
 
 	/* 1. Extract TX feedback info from RFD to temp structure buffer. */
-	/* It seems that FW use big endian(MIPS) and DRV use little endian in
-	   windows OS. So we have to read the content byte by byte or transfer
-	   endian type before copy the message copy. */
-#if 0		// The TX FEEDBACK packet element address
-	//rx_tx_fb.Element_ID 	= pMsg[0];
-	//rx_tx_fb.Length 		= pMsg[1];
-	rx_tx_fb.TOK 			= pMsg[2]>>7;
-	rx_tx_fb.Fail_Reason 	= (pMsg[2] & 0x70) >> 4;
-	rx_tx_fb.TID 			= (pMsg[2] & 0x0F);
-	rx_tx_fb.Qos_Pkt 		= pMsg[3] >> 7;
-	rx_tx_fb.Bandwidth 		= (pMsg[3] & 0x40) >> 6;
-	rx_tx_fb.Retry_Cnt 		= pMsg[5];
-	rx_tx_fb.Pkt_ID 		= (pMsg[6] << 8) | pMsg[7];
-	rx_tx_fb.Seq_Num 		= (pMsg[8] << 8) | pMsg[9];
-	rx_tx_fb.S_Rate 		= pMsg[10];
-	rx_tx_fb.F_Rate 		= pMsg[11];
-	rx_tx_fb.S_RTS_Rate 	= pMsg[12];
-	rx_tx_fb.F_RTS_Rate 	= pMsg[13];
-	rx_tx_fb.pkt_length	= (pMsg[14] << 8) | pMsg[15];
-#endif
+
 	/* 2007/07/05 MH Use pointer to transfer structure memory. */
 	//memcpy((UINT8 *)&rx_tx_fb, pMsg, sizeof(CMPK_TXFB_T));
 	memcpy((u8*)&rx_tx_fb, pmsg, sizeof(cmpk_txfb_t));
 	/* 2. Use tx feedback info to count TX statistics. */
 	cmpk_count_txstatistic(dev, &rx_tx_fb);
-#if 0
-	/* 2007/07/11 MH Assign current operate rate.  */
-	if (pAdapter->RegWirelessMode == WIRELESS_MODE_A ||
-		pAdapter->RegWirelessMode == WIRELESS_MODE_B ||
-		pAdapter->RegWirelessMode == WIRELESS_MODE_G)
-	{
-		pMgntInfo->CurrentOperaRate = (rx_tx_fb.F_Rate & 0x7F);
-	}
-	else if (pAdapter->RegWirelessMode == WIRELESS_MODE_N_24G ||
-		 	 pAdapter->RegWirelessMode == WIRELESS_MODE_N_5G)
-	{
-		pMgntInfo->HTCurrentOperaRate = (rx_tx_fb.F_Rate & 0x8F);
-	}
-#endif
+
 	/* 2007/01/17 MH Comment previous method for TX statistic function. */
 	/* Collect info TX feedback packet to fill TCB. */
 	/* We can not know the packet length and transmit type: broadcast or uni