Merge drm/drm-next into drm-intel-next-queued

Sync drm-intel-gt-next here so we can have an unified fixes flow.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

1 files changed, 1 insertions, 583 deletions

diff --git a/drivers/staging/rtl8712/ieee80211.h b/drivers/staging/rtl8712/ieee80211.h
index dabaa8fd34fb..61eff7c5746b 100644
--- a/drivers/staging/rtl8712/ieee80211.h
+++ b/drivers/staging/rtl8712/ieee80211.h
@@ -14,14 +14,8 @@
 #ifndef __IEEE80211_H
 #define __IEEE80211_H
 
-#include "osdep_service.h"
-#include "drv_types.h"
-#include "wifi.h"
-#include <linux/compiler.h>
-#include <linux/wireless.h>
+#include <linux/ieee80211.h>
 
-#define MGMT_QUEUE_NUM 5
-#define ETH_ALEN	6
 #define IEEE_CMD_SET_WPA_PARAM			1
 #define IEEE_CMD_SET_WPA_IE			2
 #define IEEE_CMD_SET_ENCRYPTION			3
@@ -102,162 +96,11 @@ struct ieee_param {
 	} u;
 };
 
-#define IEEE80211_DATA_LEN		2304
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
- * 6.2.1.1.2.
- *
- * The figure in section 7.1.2 suggests a body size of up to 2312
- * bytes is allowed, which is a bit confusing, I suspect this
- * represents the 2304 bytes of real data, plus a possible 8 bytes of
- * WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro)
- */
-
-#define IEEE80211_HLEN			30
-#define IEEE80211_FRAME_LEN		(IEEE80211_DATA_LEN + IEEE80211_HLEN)
-
-/* this is stolen from ipw2200 driver */
-#define IEEE_IBSS_MAC_HASH_SIZE 31
-
-struct ieee_ibss_seq {
-	u8 mac[ETH_ALEN];
-	u16 seq_num;
-	u16 frag_num;
-	unsigned long packet_time;
-	struct list_head list;
-};
-
-struct ieee80211_hdr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-}  __packed __aligned(2);
-
-struct ieee80211_hdr_3addr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-}  __packed __aligned(2);
-
-struct	ieee80211_hdr_qos {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-	__le16	qc;
-}   __packed __aligned(2);
-
-struct  ieee80211_hdr_3addr_qos {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8  addr1[ETH_ALEN];
-	u8  addr2[ETH_ALEN];
-	u8  addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	__le16 qc;
-}  __packed;
-
-struct eapol {
-	u8 snap[6];
-	__be16 ethertype;
-	u8 version;
-	u8 type;
-	__le16 length;
-} __packed;
-
-enum eap_type {
-	EAP_PACKET = 0,
-	EAPOL_START,
-	EAPOL_LOGOFF,
-	EAPOL_KEY,
-	EAPOL_ENCAP_ASF_ALERT
-};
-
-#define IEEE80211_3ADDR_LEN 24
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_FCS_LEN    4
-
 #define MIN_FRAG_THRESHOLD     256U
 #define	MAX_FRAG_THRESHOLD     2346U
 
-/* Frame control field constants */
-#define IEEE80211_FCTL_VERS		0x0002
-#define IEEE80211_FCTL_FTYPE		0x000c
-#define IEEE80211_FCTL_STYPE		0x00f0
-#define IEEE80211_FCTL_TODS		0x0100
-#define IEEE80211_FCTL_FROMDS		0x0200
-#define IEEE80211_FCTL_MOREFRAGS	0x0400
-#define IEEE80211_FCTL_RETRY		0x0800
-#define IEEE80211_FCTL_PM		0x1000
-#define IEEE80211_FCTL_MOREDATA	0x2000
-#define IEEE80211_FCTL_WEP		0x4000
-#define IEEE80211_FCTL_ORDER		0x8000
-
-#define IEEE80211_FTYPE_MGMT		0x0000
-#define IEEE80211_FTYPE_CTL		0x0004
-#define IEEE80211_FTYPE_DATA		0x0008
-
-/* management */
-#define IEEE80211_STYPE_ASSOC_REQ	0x0000
-#define IEEE80211_STYPE_ASSOC_RESP	0x0010
-#define IEEE80211_STYPE_REASSOC_REQ	0x0020
-#define IEEE80211_STYPE_REASSOC_RESP	0x0030
-#define IEEE80211_STYPE_PROBE_REQ	0x0040
-#define IEEE80211_STYPE_PROBE_RESP	0x0050
-#define IEEE80211_STYPE_BEACON		0x0080
-#define IEEE80211_STYPE_ATIM		0x0090
-#define IEEE80211_STYPE_DISASSOC	0x00A0
-#define IEEE80211_STYPE_AUTH		0x00B0
-#define IEEE80211_STYPE_DEAUTH		0x00C0
-
-/* control */
-#define IEEE80211_STYPE_PSPOLL		0x00A0
-#define IEEE80211_STYPE_RTS		0x00B0
-#define IEEE80211_STYPE_CTS		0x00C0
-#define IEEE80211_STYPE_ACK		0x00D0
-#define IEEE80211_STYPE_CFEND		0x00E0
-#define IEEE80211_STYPE_CFENDACK	0x00F0
-
-/* data */
-#define IEEE80211_STYPE_DATA		0x0000
-#define IEEE80211_STYPE_DATA_CFACK	0x0010
-#define IEEE80211_STYPE_DATA_CFPOLL	0x0020
-#define IEEE80211_STYPE_DATA_CFACKPOLL	0x0030
-#define IEEE80211_STYPE_NULLFUNC	0x0040
-#define IEEE80211_STYPE_CFACK		0x0050
-#define IEEE80211_STYPE_CFPOLL		0x0060
-#define IEEE80211_STYPE_CFACKPOLL	0x0070
-#define IEEE80211_QOS_DATAGRP		0x0080
-
-#define IEEE80211_SCTL_FRAG		0x000F
-#define IEEE80211_SCTL_SEQ		0xFFF0
-
 /* QoS,QOS */
 #define NORMAL_ACK			0
-#define NO_ACK				1
-#define NON_EXPLICIT_ACK	2
-#define BLOCK_ACK			3
-
-#ifndef ETH_P_PAE
-#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
-#endif /* ETH_P_PAE */
-
-#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
-
-#define ETH_P_ECONET	0x0018
-
-#ifndef ETH_P_80211_RAW
-#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
-#endif
 
 /* IEEE 802.11 defines */
 
@@ -272,58 +115,6 @@ struct ieee80211_snap_hdr {
 
 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
 
-#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
-#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
-
-#define WLAN_QC_GET_TID(qc) ((qc) & 0x0f)
-
-#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
-#define WLAN_GET_SEQ_SEQ(seq)  ((seq) & IEEE80211_SCTL_SEQ)
-
-/* Authentication algorithms */
-#define WLAN_AUTH_OPEN 0
-#define WLAN_AUTH_SHARED_KEY 1
-
-#define WLAN_AUTH_CHALLENGE_LEN 128
-
-#define WLAN_CAPABILITY_BSS BIT(0)
-#define WLAN_CAPABILITY_IBSS BIT(1)
-#define WLAN_CAPABILITY_CF_POLLABLE BIT(2)
-#define WLAN_CAPABILITY_CF_POLL_REQUEST BIT(3)
-#define WLAN_CAPABILITY_PRIVACY BIT(4)
-#define WLAN_CAPABILITY_SHORT_PREAMBLE BIT(5)
-#define WLAN_CAPABILITY_PBCC BIT(6)
-#define WLAN_CAPABILITY_CHANNEL_AGILITY BIT(7)
-#define WLAN_CAPABILITY_SHORT_SLOT BIT(10)
-
-/* Information Element IDs */
-#define WLAN_EID_SSID 0
-#define WLAN_EID_SUPP_RATES 1
-#define WLAN_EID_FH_PARAMS 2
-#define WLAN_EID_DS_PARAMS 3
-#define WLAN_EID_CF_PARAMS 4
-#define WLAN_EID_TIM 5
-#define WLAN_EID_IBSS_PARAMS 6
-#define WLAN_EID_CHALLENGE 16
-#define WLAN_EID_RSN 48
-#define WLAN_EID_GENERIC 221
-
-#define IEEE80211_MGMT_HDR_LEN 24
-#define IEEE80211_DATA_HDR3_LEN 24
-#define IEEE80211_DATA_HDR4_LEN 30
-
-#define IEEE80211_STATMASK_SIGNAL BIT(0)
-#define IEEE80211_STATMASK_RSSI BIT(1)
-#define IEEE80211_STATMASK_NOISE BIT(2)
-#define IEEE80211_STATMASK_RATE BIT(3)
-#define IEEE80211_STATMASK_WEMASK 0x7
-
-#define IEEE80211_CCK_MODULATION    BIT(0)
-#define IEEE80211_OFDM_MODULATION   BIT(1)
-
-#define IEEE80211_24GHZ_BAND     BIT(0)
-#define IEEE80211_52GHZ_BAND     BIT(1)
-
 #define IEEE80211_CCK_RATE_LEN			4
 #define IEEE80211_NUM_OFDM_RATESLEN	8
 
@@ -331,7 +122,6 @@ struct ieee80211_snap_hdr {
 #define IEEE80211_CCK_RATE_2MB		        0x04
 #define IEEE80211_CCK_RATE_5MB		        0x0B
 #define IEEE80211_CCK_RATE_11MB		        0x16
-#define IEEE80211_OFDM_RATE_LEN			8
 #define IEEE80211_OFDM_RATE_6MB		        0x0C
 #define IEEE80211_OFDM_RATE_9MB		        0x12
 #define IEEE80211_OFDM_RATE_12MB		0x18
@@ -342,388 +132,16 @@ struct ieee80211_snap_hdr {
 #define IEEE80211_OFDM_RATE_54MB		0x6C
 #define IEEE80211_BASIC_RATE_MASK		0x80
 
-#define IEEE80211_CCK_RATE_1MB_MASK		BIT(0)
-#define IEEE80211_CCK_RATE_2MB_MASK		BIT(1)
-#define IEEE80211_CCK_RATE_5MB_MASK		BIT(2)
-#define IEEE80211_CCK_RATE_11MB_MASK		BIT(3)
-#define IEEE80211_OFDM_RATE_6MB_MASK		BIT(4)
-#define IEEE80211_OFDM_RATE_9MB_MASK		BIT(5)
-#define IEEE80211_OFDM_RATE_12MB_MASK		BIT(6)
-#define IEEE80211_OFDM_RATE_18MB_MASK		BIT(7)
-#define IEEE80211_OFDM_RATE_24MB_MASK		BIT(8)
-#define IEEE80211_OFDM_RATE_36MB_MASK		BIT(9)
-#define IEEE80211_OFDM_RATE_48MB_MASK		BIT(10)
-#define IEEE80211_OFDM_RATE_54MB_MASK		BIT(11)
-
-#define IEEE80211_CCK_RATES_MASK	        0x0000000F
-#define IEEE80211_CCK_BASIC_RATES_MASK		(IEEE80211_CCK_RATE_1MB_MASK | \
-	IEEE80211_CCK_RATE_2MB_MASK)
-#define IEEE80211_CCK_DEFAULT_RATES_MASK   (IEEE80211_CCK_BASIC_RATES_MASK | \
-					   IEEE80211_CCK_RATE_5MB_MASK | \
-					   IEEE80211_CCK_RATE_11MB_MASK)
-
-#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
-#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
-	IEEE80211_OFDM_RATE_12MB_MASK | \
-	IEEE80211_OFDM_RATE_24MB_MASK)
-#define IEEE80211_OFDM_DEFAULT_RATES_MASK  (IEEE80211_OFDM_BASIC_RATES_MASK | \
-					   IEEE80211_OFDM_RATE_9MB_MASK  | \
-					   IEEE80211_OFDM_RATE_18MB_MASK | \
-					   IEEE80211_OFDM_RATE_36MB_MASK | \
-					   IEEE80211_OFDM_RATE_48MB_MASK | \
-					   IEEE80211_OFDM_RATE_54MB_MASK)
-#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
-				     IEEE80211_CCK_DEFAULT_RATES_MASK)
-
-#define IEEE80211_NUM_OFDM_RATES	    8
-#define IEEE80211_NUM_CCK_RATES	            4
-#define IEEE80211_OFDM_SHIFT_MASK_A         4
-
-/* NOTE: This data is for statistical purposes; not all hardware provides this
- *       information for frames received.  Not setting these will not cause
- *       any adverse affects.
- */
-struct ieee80211_rx_stats {
-	s8 rssi;
-	u8 signal;
-	u8 noise;
-	u8 received_channel;
-	u16 rate; /* in 100 kbps */
-	u8 mask;
-	u8 freq;
-	u16 len;
-};
-
-/* IEEE 802.11 requires that STA supports concurrent reception of at least
- * three fragmented frames. This define can be increased to support more
- * concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly.
- */
-#define IEEE80211_FRAG_CACHE_LEN 4
-
-struct ieee80211_frag_entry {
-	u32 first_frag_time;
-	uint seq;
-	uint last_frag;
-	uint qos;   /*jackson*/
-	uint tid;	/*jackson*/
-	struct sk_buff *skb;
-	u8 src_addr[ETH_ALEN];
-	u8 dst_addr[ETH_ALEN];
-};
-
-struct ieee80211_stats {
-	uint tx_unicast_frames;
-	uint tx_multicast_frames;
-	uint tx_fragments;
-	uint tx_unicast_octets;
-	uint tx_multicast_octets;
-	uint tx_deferred_transmissions;
-	uint tx_single_retry_frames;
-	uint tx_multiple_retry_frames;
-	uint tx_retry_limit_exceeded;
-	uint tx_discards;
-	uint rx_unicast_frames;
-	uint rx_multicast_frames;
-	uint rx_fragments;
-	uint rx_unicast_octets;
-	uint rx_multicast_octets;
-	uint rx_fcs_errors;
-	uint rx_discards_no_buffer;
-	uint tx_discards_wrong_sa;
-	uint rx_discards_undecryptable;
-	uint rx_message_in_msg_fragments;
-	uint rx_message_in_bad_msg_fragments;
-};
-
-struct ieee80211_softmac_stats {
-	uint rx_ass_ok;
-	uint rx_ass_err;
-	uint rx_probe_rq;
-	uint tx_probe_rs;
-	uint tx_beacons;
-	uint rx_auth_rq;
-	uint rx_auth_rs_ok;
-	uint rx_auth_rs_err;
-	uint tx_auth_rq;
-	uint no_auth_rs;
-	uint no_ass_rs;
-	uint tx_ass_rq;
-	uint rx_ass_rq;
-	uint tx_probe_rq;
-	uint reassoc;
-	uint swtxstop;
-	uint swtxawake;
-};
-
-#define SEC_KEY_1         BIT(0)
-#define SEC_KEY_2         BIT(1)
-#define SEC_KEY_3         BIT(2)
-#define SEC_KEY_4         BIT(3)
-#define SEC_ACTIVE_KEY    BIT(4)
-#define SEC_AUTH_MODE     BIT(5)
-#define SEC_UNICAST_GROUP BIT(6)
-#define SEC_LEVEL         BIT(7)
-#define SEC_ENABLED       BIT(8)
-
-#define SEC_LEVEL_0      0 /* None */
-#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
-#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
-#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
-#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
-
 #define WEP_KEYS 4
-#define WEP_KEY_LEN 13
-
-struct ieee80211_security {
-	u16 active_key:2,
-	    enabled:1,
-	    auth_mode:2,
-	    auth_algo:4,
-	    unicast_uses_group:1;
-	u8 key_sizes[WEP_KEYS];
-	u8 keys[WEP_KEYS][WEP_KEY_LEN];
-	u8 level;
-	u16 flags;
-} __packed;
-
-/*
- *
- * 802.11 data frame from AP
- *
- *       ,-------------------------------------------------------------------.
- * Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
- *       |------|------|---------|---------|---------|------|---------|------|
- * Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
- *       |      | tion | (BSSID) |         |         | ence |  data   |      |
- *       `-------------------------------------------------------------------'
- *
- * Total: 28-2340 bytes
- *
- */
-
-struct ieee80211_header_data {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[6];
-	u8 addr2[6];
-	u8 addr3[6];
-	__le16 seq_ctrl;
-} __packed __aligned(2);
 
-#define BEACON_PROBE_SSID_ID_POSITION 12
-
-/* Management Frame Information Element Types */
-#define MFIE_TYPE_SSID       0
-#define MFIE_TYPE_RATES      1
-#define MFIE_TYPE_FH_SET     2
-#define MFIE_TYPE_DS_SET     3
-#define MFIE_TYPE_CF_SET     4
-#define MFIE_TYPE_TIM        5
-#define MFIE_TYPE_IBSS_SET   6
-#define MFIE_TYPE_CHALLENGE  16
-#define MFIE_TYPE_ERP        42
-#define MFIE_TYPE_RSN	     48
-#define MFIE_TYPE_RATES_EX   50
-#define MFIE_TYPE_GENERIC    221
-
-struct ieee80211_info_element_hdr {
-	u8 id;
-	u8 len;
-} __packed;
-
-struct ieee80211_info_element {
-	u8 id;
-	u8 len;
-	u8 data[];
-} __packed;
-
-/*
- * These are the data types that can make up management packets
- *
-	__le16 auth_algorithm;
-	__le16 auth_sequence;
-	__le16 beacon_interval;
-	__le16 capability;
-	u8 current_ap[ETH_ALEN];
-	__le16 listen_interval;
-	struct {
-		u16 association_id:14, reserved:2;
-	} __packed;
-	__le32 time_stamp[2];
-	__le16 reason;
-	__le16 status;
-*/
-
-#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
-#define IEEE80211_DEFAULT_BASIC_RATE 10
-
-struct ieee80211_authentication {
-	struct ieee80211_header_data header;
-	__le16 algorithm;
-	__le16 transaction;
-	__le16 status;
-} __packed;
-
-struct ieee80211_probe_response {
-	struct ieee80211_header_data header;
-	__le32 time_stamp[2];
-	__le16 beacon_interval;
-	__le16 capability;
-	struct ieee80211_info_element info_element;
-} __packed;
-
-struct ieee80211_probe_request {
-	struct ieee80211_header_data header;
-} __packed;
-
-struct ieee80211_assoc_request_frame {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 listen_interval;
-	struct ieee80211_info_element_hdr info_element;
-} __packed;
-
-struct ieee80211_assoc_response_frame {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 status;
-	__le16 aid;
-} __packed;
-
-struct ieee80211_txb {
-	u8 nr_frags;
-	u8 encrypted;
-	u16 reserved;
-	u16 frag_size;
-	u16 payload_size;
-	struct sk_buff *fragments[];
-};
-
-/* SWEEP TABLE ENTRIES NUMBER*/
-#define MAX_SWEEP_TAB_ENTRIES		  42
-#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
 /* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
  * only use 8, and then use extended rates for the remaining supported
  * rates.  Other APs, however, stick all of their supported rates on the
  * main rates information element...
  */
 #define MAX_RATES_LENGTH                  ((u8)12)
-#define MAX_RATES_EX_LENGTH               ((u8)16)
-#define MAX_NETWORK_COUNT                  128
-#define MAX_CHANNEL_NUMBER                 161
-#define IEEE80211_SOFTMAC_SCAN_TIME	  400
-/*(HZ / 2)*/
-#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
-
-#define CRC_LENGTH                 4U
-
 #define MAX_WPA_IE_LEN 128
 
-#define NETWORK_EMPTY_ESSID BIT(0)
-#define NETWORK_HAS_OFDM    BIT(1)
-#define NETWORK_HAS_CCK     BIT(2)
-
-#define IEEE80211_DTIM_MBCAST 4
-#define IEEE80211_DTIM_UCAST 2
-#define IEEE80211_DTIM_VALID 1
-#define IEEE80211_DTIM_INVALID 0
-
-#define IEEE80211_PS_DISABLED 0
-#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
-#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
-#define IW_ESSID_MAX_SIZE 32
-/*
- * join_res:
- * -1: authentication fail
- * -2: association fail
- * > 0: TID
- */
-
-enum ieee80211_state {
-	/* the card is not linked at all */
-	IEEE80211_NOLINK = 0,
-	/* IEEE80211_ASSOCIATING* are for BSS client mode
-	 * the driver shall not perform RX filtering unless
-	 * the state is LINKED.
-	 * The driver shall just check for the state LINKED and
-	 * defaults to NOLINK for ALL the other states (including
-	 * LINKED_SCANNING)
-	 */
-	/* the association procedure will start (wq scheduling)*/
-	IEEE80211_ASSOCIATING,
-	IEEE80211_ASSOCIATING_RETRY,
-	/* the association procedure is sending AUTH request*/
-	IEEE80211_ASSOCIATING_AUTHENTICATING,
-	/* the association procedure has successfully authenticated
-	 * and is sending association request
-	 */
-	IEEE80211_ASSOCIATING_AUTHENTICATED,
-	/* the link is ok. the card associated to a BSS or linked
-	 * to a ibss cell or acting as an AP and creating the bss
-	 */
-	IEEE80211_LINKED,
-	/* same as LINKED, but the driver shall apply RX filter
-	 * rules as we are in NO_LINK mode. As the card is still
-	 * logically linked, but it is doing a syncro site survey
-	 * then it will be back to LINKED state.
-	 */
-	IEEE80211_LINKED_SCANNING,
-};
-
-#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
-#define DEFAULT_FTS 2346
-
-#define CFG_IEEE80211_RESERVE_FCS BIT(0)
-#define CFG_IEEE80211_COMPUTE_FCS BIT(1)
-
-#define MAXTID	16
-
-#define IEEE_A            BIT(0)
-#define IEEE_B            BIT(1)
-#define IEEE_G            BIT(2)
-#define IEEE_MODE_MASK    (IEEE_A | IEEE_B | IEEE_G)
-
-static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
-{
-	/* Single white space is for Linksys APs */
-	if (essid_len == 1 && essid[0] == ' ')
-		return 1;
-	/* Otherwise, if the entire essid is 0, we assume it is hidden */
-	while (essid_len) {
-		essid_len--;
-		if (essid[essid_len] != '\0')
-			return 0;
-	}
-	return 1;
-}
-
-static inline int ieee80211_get_hdrlen(u16 fc)
-{
-	int hdrlen = 24;
-
-	switch (WLAN_FC_GET_TYPE(fc)) {
-	case IEEE80211_FTYPE_DATA:
-		if (fc & IEEE80211_QOS_DATAGRP)
-			hdrlen += 2;
-		if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
-			hdrlen += 6; /* Addr4 */
-		break;
-	case IEEE80211_FTYPE_CTL:
-		switch (WLAN_FC_GET_STYPE(fc)) {
-		case IEEE80211_STYPE_CTS:
-		case IEEE80211_STYPE_ACK:
-			hdrlen = 10;
-			break;
-		default:
-			hdrlen = 16;
-			break;
-		}
-		break;
-	}
-	return hdrlen;
-}
-
 struct registry_priv;
 
 u8 *r8712_set_ie(u8 *pbuf, sint index, uint len, u8 *source, uint *frlen);