staging: Remove rtl8723au driver

This driver is superseded by rtl8xxxu and has been marked as scheduled
for deletion since 4.6

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 1269 deletions

diff --git a/drivers/staging/rtl8723au/hal/usb_halinit.c b/drivers/staging/rtl8723au/hal/usb_halinit.c
deleted file mode 100644
index fa47aebf8b98..000000000000
--- a/drivers/staging/rtl8723au/hal/usb_halinit.c
+++ /dev/null
@@ -1,1269 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- ******************************************************************************/
-#define _HCI_HAL_INIT_C_
-
-#include <osdep_service.h>
-#include <drv_types.h>
-#include <rtw_efuse.h>
-
-#include <HalPwrSeqCmd.h>
-#include <Hal8723PwrSeq.h>
-#include <rtl8723a_hal.h>
-#include <linux/ieee80211.h>
-
-#include <usb_ops.h>
-
-static void phy_SsPwrSwitch92CU(struct rtw_adapter *Adapter,
-				enum rt_rf_power_state eRFPowerState);
-
-static void
-_ConfigChipOutEP(struct rtw_adapter *pAdapter, u8 NumOutPipe)
-{
-	u8 value8;
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(pAdapter);
-
-	pHalData->OutEpQueueSel = 0;
-	pHalData->OutEpNumber = 0;
-
-	/*  Normal and High queue */
-	value8 = rtl8723au_read8(pAdapter, (REG_NORMAL_SIE_EP + 1));
-
-	if (value8 & USB_NORMAL_SIE_EP_MASK) {
-		pHalData->OutEpQueueSel |= TX_SELE_HQ;
-		pHalData->OutEpNumber++;
-	}
-
-	if ((value8 >> USB_NORMAL_SIE_EP_SHIFT) & USB_NORMAL_SIE_EP_MASK) {
-		pHalData->OutEpQueueSel |= TX_SELE_NQ;
-		pHalData->OutEpNumber++;
-	}
-
-	/*  Low queue */
-	value8 = rtl8723au_read8(pAdapter, (REG_NORMAL_SIE_EP + 2));
-	if (value8 & USB_NORMAL_SIE_EP_MASK) {
-		pHalData->OutEpQueueSel |= TX_SELE_LQ;
-		pHalData->OutEpNumber++;
-	}
-
-	/*  TODO: Error recovery for this case */
-	/* RT_ASSERT((NumOutPipe == pHalData->OutEpNumber),
-	   ("Out EP number isn't match! %d(Descriptor) != %d (SIE reg)\n",
-	   (u32)NumOutPipe, (u32)pHalData->OutEpNumber)); */
-}
-
-bool rtl8723au_chip_configure(struct rtw_adapter *padapter)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-	struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter);
-	u8 NumInPipe = pdvobjpriv->RtNumInPipes;
-	u8 NumOutPipe = pdvobjpriv->RtNumOutPipes;
-
-	_ConfigChipOutEP(padapter, NumOutPipe);
-
-	/*  Normal chip with one IN and one OUT doesn't have interrupt IN EP. */
-	if (pHalData->OutEpNumber == 1) {
-		if (NumInPipe != 1)
-			return false;
-	}
-
-	return Hal_MappingOutPipe23a(padapter, NumOutPipe);
-}
-
-static int _InitPowerOn(struct rtw_adapter *padapter)
-{
-	u16 value16;
-	u8 value8;
-
-	/*  RSV_CTRL 0x1C[7:0] = 0x00
-	    unlock ISO/CLK/Power control register */
-	rtl8723au_write8(padapter, REG_RSV_CTRL, 0x0);
-
-	/*  HW Power on sequence */
-	if (!HalPwrSeqCmdParsing23a(padapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				 PWR_INTF_USB_MSK, rtl8723AU_card_enable_flow))
-		return _FAIL;
-
-	/*  0x04[19] = 1, suggest by Jackie 2011.05.09, reset 8051 */
-	value8 = rtl8723au_read8(padapter, REG_APS_FSMCO+2);
-	rtl8723au_write8(padapter, REG_APS_FSMCO + 2, value8 | BIT(3));
-
-	/*  Enable MAC DMA/WMAC/SCHEDULE/SEC block */
-	/*  Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy.
-	    Added by tynli. 2011.08.31. */
-	value16 = rtl8723au_read16(padapter, REG_CR);
-	value16 |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN |
-		    PROTOCOL_EN | SCHEDULE_EN | MACTXEN | MACRXEN |
-		    ENSEC | CALTMR_EN);
-	rtl8723au_write16(padapter, REG_CR, value16);
-
-	/* for Efuse PG, suggest by Jackie 2011.11.23 */
-	PHY_SetBBReg(padapter, REG_EFUSE_CTRL, BIT(28)|BIT(29)|BIT(30), 0x06);
-
-	return _SUCCESS;
-}
-
-/*  Shall USB interface init this? */
-static void _InitInterrupt(struct rtw_adapter *Adapter)
-{
-	u32 value32;
-
-	/*  HISR - turn all on */
-	value32 = 0xFFFFFFFF;
-	rtl8723au_write32(Adapter, REG_HISR, value32);
-
-	/*  HIMR - turn all on */
-	rtl8723au_write32(Adapter, REG_HIMR, value32);
-}
-
-static void _InitQueueReservedPage(struct rtw_adapter *Adapter)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
-	u32 numHQ = 0;
-	u32 numLQ = 0;
-	u32 numNQ = 0;
-	u32 numPubQ;
-	u32 value32;
-	u8 value8;
-	bool bWiFiConfig = pregistrypriv->wifi_spec;
-
-	/* RT_ASSERT((outEPNum>= 2), ("for WMM , number of out-ep "
-	   "must more than or equal to 2!\n")); */
-
-	numPubQ = bWiFiConfig ? WMM_NORMAL_PAGE_NUM_PUBQ : NORMAL_PAGE_NUM_PUBQ;
-
-	if (pHalData->OutEpQueueSel & TX_SELE_HQ) {
-		numHQ = bWiFiConfig ?
-			WMM_NORMAL_PAGE_NUM_HPQ : NORMAL_PAGE_NUM_HPQ;
-	}
-
-	if (pHalData->OutEpQueueSel & TX_SELE_LQ) {
-		numLQ = bWiFiConfig ?
-			WMM_NORMAL_PAGE_NUM_LPQ : NORMAL_PAGE_NUM_LPQ;
-	}
-	/*  NOTE: This step shall be proceed before
-	    writting REG_RQPN. */
-	if (pHalData->OutEpQueueSel & TX_SELE_NQ) {
-		numNQ = bWiFiConfig ?
-			WMM_NORMAL_PAGE_NUM_NPQ : NORMAL_PAGE_NUM_NPQ;
-	}
-	value8 = (u8)_NPQ(numNQ);
-	rtl8723au_write8(Adapter, REG_RQPN_NPQ, value8);
-
-	/*  TX DMA */
-	value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN;
-	rtl8723au_write32(Adapter, REG_RQPN, value32);
-}
-
-static void _InitTxBufferBoundary(struct rtw_adapter *Adapter)
-{
-	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
-
-	u8 txpktbuf_bndy;
-
-	if (!pregistrypriv->wifi_spec)
-		txpktbuf_bndy = TX_PAGE_BOUNDARY;
-	else /* for WMM */
-		txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY;
-
-	rtl8723au_write8(Adapter, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy);
-	rtl8723au_write8(Adapter, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy);
-	rtl8723au_write8(Adapter, REG_TXPKTBUF_WMAC_LBK_BF_HD, txpktbuf_bndy);
-	rtl8723au_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy);
-	rtl8723au_write8(Adapter, REG_TDECTRL+1, txpktbuf_bndy);
-}
-
-static void _InitPageBoundary(struct rtw_adapter *Adapter)
-{
-	/*  RX Page Boundary */
-	/* srand(static_cast<unsigned int>(time(NULL))); */
-	u16 rxff_bndy = 0x27FF;/* rand() % 1) ? 0x27FF : 0x23FF; */
-
-	rtl8723au_write16(Adapter, (REG_TRXFF_BNDY + 2), rxff_bndy);
-
-	/*  TODO: ?? shall we set tx boundary? */
-}
-
-static void
-_InitNormalChipRegPriority(struct rtw_adapter *Adapter, u16 beQ, u16 bkQ,
-			   u16 viQ, u16 voQ, u16 mgtQ, u16 hiQ)
-{
-	u16 value16 = rtl8723au_read16(Adapter, REG_TRXDMA_CTRL) & 0x7;
-
-	value16 |= _TXDMA_BEQ_MAP(beQ) | _TXDMA_BKQ_MAP(bkQ) |
-		_TXDMA_VIQ_MAP(viQ) | _TXDMA_VOQ_MAP(voQ) |
-		_TXDMA_MGQ_MAP(mgtQ) | _TXDMA_HIQ_MAP(hiQ);
-
-	rtl8723au_write16(Adapter, REG_TRXDMA_CTRL, value16);
-}
-
-static void _InitNormalChipOneOutEpPriority(struct rtw_adapter *Adapter)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-	u16 value = 0;
-
-	switch (pHalData->OutEpQueueSel) {
-	case TX_SELE_HQ:
-		value = QUEUE_HIGH;
-		break;
-	case TX_SELE_LQ:
-		value = QUEUE_LOW;
-		break;
-	case TX_SELE_NQ:
-		value = QUEUE_NORMAL;
-		break;
-	default:
-		/* RT_ASSERT(false, ("Shall not reach here!\n")); */
-		break;
-	}
-
-	_InitNormalChipRegPriority(Adapter, value, value, value,
-				   value, value, value);
-}
-
-static void _InitNormalChipTwoOutEpPriority(struct rtw_adapter *Adapter)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
-	u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
-	u16 valueHi = 0;
-	u16 valueLow = 0;
-
-	switch (pHalData->OutEpQueueSel) {
-	case (TX_SELE_HQ | TX_SELE_LQ):
-		valueHi = QUEUE_HIGH;
-		valueLow = QUEUE_LOW;
-		break;
-	case (TX_SELE_NQ | TX_SELE_LQ):
-		valueHi = QUEUE_NORMAL;
-		valueLow = QUEUE_LOW;
-		break;
-	case (TX_SELE_HQ | TX_SELE_NQ):
-		valueHi = QUEUE_HIGH;
-		valueLow = QUEUE_NORMAL;
-		break;
-	default:
-		/* RT_ASSERT(false, ("Shall not reach here!\n")); */
-		break;
-	}
-
-	if (!pregistrypriv->wifi_spec) {
-		beQ = valueLow;
-		bkQ = valueLow;
-		viQ = valueHi;
-		voQ = valueHi;
-		mgtQ = valueHi;
-		hiQ = valueHi;
-	} else {/* for WMM , CONFIG_OUT_EP_WIFI_MODE */
-		beQ = valueLow;
-		bkQ = valueHi;
-		viQ = valueHi;
-		voQ = valueLow;
-		mgtQ = valueHi;
-		hiQ = valueHi;
-	}
-
-	_InitNormalChipRegPriority(Adapter, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
-}
-
-static void _InitNormalChipThreeOutEpPriority(struct rtw_adapter *Adapter)
-{
-	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
-	u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
-
-	if (!pregistrypriv->wifi_spec) {/*  typical setting */
-		beQ = QUEUE_LOW;
-		bkQ = QUEUE_LOW;
-		viQ = QUEUE_NORMAL;
-		voQ = QUEUE_HIGH;
-		mgtQ = QUEUE_HIGH;
-		hiQ = QUEUE_HIGH;
-	} else {/*  for WMM */
-		beQ = QUEUE_LOW;
-		bkQ = QUEUE_NORMAL;
-		viQ = QUEUE_NORMAL;
-		voQ = QUEUE_HIGH;
-		mgtQ = QUEUE_HIGH;
-		hiQ = QUEUE_HIGH;
-	}
-	_InitNormalChipRegPriority(Adapter, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
-}
-
-static void _InitQueuePriority(struct rtw_adapter *Adapter)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-
-	switch (pHalData->OutEpNumber) {
-	case 1:
-		_InitNormalChipOneOutEpPriority(Adapter);
-		break;
-	case 2:
-		_InitNormalChipTwoOutEpPriority(Adapter);
-		break;
-	case 3:
-		_InitNormalChipThreeOutEpPriority(Adapter);
-		break;
-	default:
-		/* RT_ASSERT(false, ("Shall not reach here!\n")); */
-		break;
-	}
-}
-
-static void _InitTransferPageSize(struct rtw_adapter *Adapter)
-{
-	/*  Tx page size is always 128. */
-
-	u8 value8;
-	value8 = _PSRX(PBP_128) | _PSTX(PBP_128);
-	rtl8723au_write8(Adapter, REG_PBP, value8);
-}
-
-static void _InitDriverInfoSize(struct rtw_adapter *Adapter, u8 drvInfoSize)
-{
-	rtl8723au_write8(Adapter, REG_RX_DRVINFO_SZ, drvInfoSize);
-}
-
-static void _InitWMACSetting(struct rtw_adapter *Adapter)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-
-	/*  don't turn on AAP, it will allow all packets to driver */
-	pHalData->ReceiveConfig = RCR_APM | RCR_AM | RCR_AB | RCR_CBSSID_DATA |
-				  RCR_CBSSID_BCN | RCR_APP_ICV | RCR_AMF |
-				  RCR_HTC_LOC_CTRL | RCR_APP_MIC |
-				  RCR_APP_PHYSTS;
-
-	/*  some REG_RCR will be modified later by
-	    phy_ConfigMACWithHeaderFile() */
-	rtl8723au_write32(Adapter, REG_RCR, pHalData->ReceiveConfig);
-
-	/*  Accept all multicast address */
-	rtl8723au_write32(Adapter, REG_MAR, 0xFFFFFFFF);
-	rtl8723au_write32(Adapter, REG_MAR + 4, 0xFFFFFFFF);
-
-	/*  Accept all data frames */
-	/* value16 = 0xFFFF; */
-	/* rtl8723au_write16(Adapter, REG_RXFLTMAP2, value16); */
-
-	/*  2010.09.08 hpfan */
-	/*  Since ADF is removed from RCR, ps-poll will not be indicate
-	    to driver, */
-	/*  RxFilterMap should mask ps-poll to guarantee AP mode can
-	    rx ps-poll. */
-	/* value16 = 0x400; */
-	/* rtl8723au_write16(Adapter, REG_RXFLTMAP1, value16); */
-
-	/*  Accept all management frames */
-	/* value16 = 0xFFFF; */
-	/* rtl8723au_write16(Adapter, REG_RXFLTMAP0, value16); */
-
-	/* enable RX_SHIFT bits */
-	/* rtl8723au_write8(Adapter, REG_TRXDMA_CTRL, rtl8723au_read8(Adapter,
-	   REG_TRXDMA_CTRL)|BIT(1)); */
-}
-
-static void _InitAdaptiveCtrl(struct rtw_adapter *Adapter)
-{
-	u16 value16;
-	u32 value32;
-
-	/*  Response Rate Set */
-	value32 = rtl8723au_read32(Adapter, REG_RRSR);
-	value32 &= ~RATE_BITMAP_ALL;
-	value32 |= RATE_RRSR_CCK_ONLY_1M;
-	rtl8723au_write32(Adapter, REG_RRSR, value32);
-
-	/*  CF-END Threshold */
-	/* m_spIoBase->rtl8723au_write8(REG_CFEND_TH, 0x1); */
-
-	/*  SIFS (used in NAV) */
-	value16 = _SPEC_SIFS_CCK(0x10) | _SPEC_SIFS_OFDM(0x10);
-	rtl8723au_write16(Adapter, REG_SPEC_SIFS, value16);
-
-	/*  Retry Limit */
-	value16 = _LRL(0x30) | _SRL(0x30);
-	rtl8723au_write16(Adapter, REG_RL, value16);
-}
-
-static void _InitRateFallback(struct rtw_adapter *Adapter)
-{
-	/*  Set Data Auto Rate Fallback Retry Count register. */
-	rtl8723au_write32(Adapter, REG_DARFRC, 0x00000000);
-	rtl8723au_write32(Adapter, REG_DARFRC+4, 0x10080404);
-	rtl8723au_write32(Adapter, REG_RARFRC, 0x04030201);
-	rtl8723au_write32(Adapter, REG_RARFRC+4, 0x08070605);
-}
-
-static void _InitEDCA(struct rtw_adapter *Adapter)
-{
-	/*  Set Spec SIFS (used in NAV) */
-	rtl8723au_write16(Adapter, REG_SPEC_SIFS, 0x100a);
-	rtl8723au_write16(Adapter, REG_MAC_SPEC_SIFS, 0x100a);
-
-	/*  Set SIFS for CCK */
-	rtl8723au_write16(Adapter, REG_SIFS_CTX, 0x100a);
-
-	/*  Set SIFS for OFDM */
-	rtl8723au_write16(Adapter, REG_SIFS_TRX, 0x100a);
-
-	/*  TXOP */
-	rtl8723au_write32(Adapter, REG_EDCA_BE_PARAM, 0x005EA42B);
-	rtl8723au_write32(Adapter, REG_EDCA_BK_PARAM, 0x0000A44F);
-	rtl8723au_write32(Adapter, REG_EDCA_VI_PARAM, 0x005EA324);
-	rtl8723au_write32(Adapter, REG_EDCA_VO_PARAM, 0x002FA226);
-}
-
-static void _InitRDGSetting(struct rtw_adapter *Adapter)
-{
-	rtl8723au_write8(Adapter, REG_RD_CTRL, 0xFF);
-	rtl8723au_write16(Adapter, REG_RD_NAV_NXT, 0x200);
-	rtl8723au_write8(Adapter, REG_RD_RESP_PKT_TH, 0x05);
-}
-
-static void _InitRetryFunction(struct rtw_adapter *Adapter)
-{
-	u8 value8;
-
-	value8 = rtl8723au_read8(Adapter, REG_FWHW_TXQ_CTRL);
-	value8 |= EN_AMPDU_RTY_NEW;
-	rtl8723au_write8(Adapter, REG_FWHW_TXQ_CTRL, value8);
-
-	/*  Set ACK timeout */
-	rtl8723au_write8(Adapter, REG_ACKTO, 0x40);
-}
-
-static void _InitRFType(struct rtw_adapter *Adapter)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-
-	pHalData->rf_type = RF_1T1R;
-}
-
-/*  Set CCK and OFDM Block "ON" */
-static void _BBTurnOnBlock(struct rtw_adapter *Adapter)
-{
-	PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bCCKEn, 0x1);
-	PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
-}
-
-#define MgntActSet_RF_State(...)
-static void _RfPowerSave(struct rtw_adapter *padapter)
-{
-}
-
-enum {
-	Antenna_Lfet = 1,
-	Antenna_Right = 2,
-};
-
-enum rt_rf_power_state RfOnOffDetect23a(struct rtw_adapter *pAdapter)
-{
-	/* struct hal_data_8723a *pHalData = GET_HAL_DATA(pAdapter); */
-	u8 val8;
-	enum rt_rf_power_state rfpowerstate = rf_off;
-
-	rtl8723au_write8(pAdapter, REG_MAC_PINMUX_CFG,
-			 rtl8723au_read8(pAdapter,
-					 REG_MAC_PINMUX_CFG) & ~BIT(3));
-	val8 = rtl8723au_read8(pAdapter, REG_GPIO_IO_SEL);
-	DBG_8723A("GPIO_IN =%02x\n", val8);
-	rfpowerstate = (val8 & BIT(3)) ? rf_on : rf_off;
-
-	return rfpowerstate;
-}
-
-int rtl8723au_hal_init(struct rtw_adapter *Adapter)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-	struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv;
-	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
-	u8 val8 = 0;
-	u32 boundary;
-	int status = _SUCCESS;
-	bool mac_on;
-
-	unsigned long init_start_time = jiffies;
-
-	Adapter->hw_init_completed = false;
-
-	if (Adapter->pwrctrlpriv.bkeepfwalive) {
-		phy_SsPwrSwitch92CU(Adapter, rf_on);
-
-		if (pHalData->bIQKInitialized) {
-			rtl8723a_phy_iq_calibrate(Adapter, true);
-		} else {
-			rtl8723a_phy_iq_calibrate(Adapter, false);
-			pHalData->bIQKInitialized = true;
-		}
-		rtl8723a_odm_check_tx_power_tracking(Adapter);
-		rtl8723a_phy_lc_calibrate(Adapter);
-
-		goto exit;
-	}
-
-	/*  Check if MAC has already power on. by tynli. 2011.05.27. */
-	val8 = rtl8723au_read8(Adapter, REG_CR);
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 "%s: REG_CR 0x100 = 0x%02x\n", __func__, val8);
-	/* Fix 92DU-VC S3 hang with the reason is that secondary mac is not
-	   initialized. */
-	/* 0x100 value of first mac is 0xEA while 0x100 value of secondary
-	   is 0x00 */
-	if (val8 == 0xEA) {
-		mac_on = false;
-	} else {
-		mac_on = true;
-		RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-			 "%s: MAC has already power on\n", __func__);
-	}
-
-	status = _InitPowerOn(Adapter);
-	if (status == _FAIL) {
-		RT_TRACE(_module_hci_hal_init_c_, _drv_err_,
-			 "Failed to init power on!\n");
-		goto exit;
-	}
-
-	if (!pregistrypriv->wifi_spec) {
-		boundary = TX_PAGE_BOUNDARY;
-	} else {
-		/*  for WMM */
-		boundary = WMM_NORMAL_TX_PAGE_BOUNDARY;
-	}
-
-	if (!mac_on) {
-		status =  InitLLTTable23a(Adapter, boundary);
-		if (status == _FAIL) {
-			RT_TRACE(_module_hci_hal_init_c_, _drv_err_,
-				 "Failed to init LLT table\n");
-			goto exit;
-		}
-	}
-
-	if (pHalData->bRDGEnable)
-		_InitRDGSetting(Adapter);
-
-	status = rtl8723a_FirmwareDownload(Adapter);
-	if (status != _SUCCESS) {
-		Adapter->bFWReady = false;
-		DBG_8723A("fw download fail!\n");
-		goto exit;
-	} else {
-		Adapter->bFWReady = true;
-		DBG_8723A("fw download ok!\n");
-	}
-
-	rtl8723a_InitializeFirmwareVars(Adapter);
-
-	if (pwrctrlpriv->reg_rfoff == true) {
-		pwrctrlpriv->rf_pwrstate = rf_off;
-	}
-
-	/*  2010/08/09 MH We need to check if we need to turnon or off RF after detecting */
-	/*  HW GPIO pin. Before PHY_RFConfig8192C. */
-	/* HalDetectPwrDownMode(Adapter); */
-	/*  2010/08/26 MH If Efuse does not support sective suspend then disable the function. */
-	/* HalDetectSelectiveSuspendMode(Adapter); */
-
-	/*  Set RF type for BB/RF configuration */
-	_InitRFType(Adapter);/* _ReadRFType() */
-
-	/*  Save target channel */
-	/*  <Roger_Notes> Current Channel will be updated again later. */
-	pHalData->CurrentChannel = 6;/* default set to 6 */
-
-	status = PHY_MACConfig8723A(Adapter);
-	if (status == _FAIL) {
-		DBG_8723A("PHY_MACConfig8723A fault !!\n");
-		goto exit;
-	}
-
-	/*  */
-	/* d. Initialize BB related configurations. */
-	/*  */
-	status = PHY_BBConfig8723A(Adapter);
-	if (status == _FAIL) {
-		DBG_8723A("PHY_BBConfig8723A fault !!\n");
-		goto exit;
-	}
-
-	/*  Add for tx power by rate fine tune. We need to call the function after BB config. */
-	/*  Because the tx power by rate table is inited in BB config. */
-
-	status = PHY_RF6052_Config8723A(Adapter);
-	if (status == _FAIL) {
-		DBG_8723A("PHY_RF6052_Config8723A failed!!\n");
-		goto exit;
-	}
-
-	/* reducing 80M spur */
-	rtl8723au_write32(Adapter, REG_AFE_XTAL_CTRL, 0x0381808d);
-	rtl8723au_write32(Adapter, REG_AFE_PLL_CTRL, 0xf0ffff83);
-	rtl8723au_write32(Adapter, REG_AFE_PLL_CTRL, 0xf0ffff82);
-	rtl8723au_write32(Adapter, REG_AFE_PLL_CTRL, 0xf0ffff83);
-
-	/* RFSW Control */
-	/* 0x804[14]= 0 */
-	rtl8723au_write32(Adapter, rFPGA0_TxInfo, 0x00000003);
-	/* 0x870[6:5]= b'11 */
-	rtl8723au_write32(Adapter, rFPGA0_XAB_RFInterfaceSW, 0x07000760);
-	/* 0x860[6:5]= b'00 */
-	rtl8723au_write32(Adapter, rFPGA0_XA_RFInterfaceOE, 0x66F60210);
-
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 "%s: 0x870 = value 0x%x\n", __func__,
-		 rtl8723au_read32(Adapter, 0x870));
-
-	/*  */
-	/*  Joseph Note: Keep RfRegChnlVal for later use. */
-	/*  */
-	pHalData->RfRegChnlVal[0] = PHY_QueryRFReg(Adapter, RF_PATH_A,
-						   RF_CHNLBW, bRFRegOffsetMask);
-	pHalData->RfRegChnlVal[1] = PHY_QueryRFReg(Adapter, RF_PATH_B,
-						   RF_CHNLBW, bRFRegOffsetMask);
-
-	if (!mac_on) {
-		_InitQueueReservedPage(Adapter);
-		_InitTxBufferBoundary(Adapter);
-	}
-	_InitQueuePriority(Adapter);
-	_InitPageBoundary(Adapter);
-	_InitTransferPageSize(Adapter);
-
-	/*  Get Rx PHY status in order to report RSSI and others. */
-	_InitDriverInfoSize(Adapter, DRVINFO_SZ);
-
-	_InitInterrupt(Adapter);
-	hw_var_set_macaddr(Adapter, Adapter->eeprompriv.mac_addr);
-	rtl8723a_set_media_status(Adapter, MSR_INFRA);
-	_InitWMACSetting(Adapter);
-	_InitAdaptiveCtrl(Adapter);
-	_InitEDCA(Adapter);
-	_InitRateFallback(Adapter);
-	_InitRetryFunction(Adapter);
-	rtl8723a_InitBeaconParameters(Adapter);
-
-	_BBTurnOnBlock(Adapter);
-	/* NicIFSetMacAddress(padapter, padapter->PermanentAddress); */
-
-	rtl8723a_cam_invalidate_all(Adapter);
-
-	/*  2010/12/17 MH We need to set TX power according to EFUSE content at first. */
-	PHY_SetTxPowerLevel8723A(Adapter, pHalData->CurrentChannel);
-
-	rtl8723a_InitAntenna_Selection(Adapter);
-
-	/*  HW SEQ CTRL */
-	/* set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM. */
-	rtl8723au_write8(Adapter, REG_HWSEQ_CTRL, 0xFF);
-
-	/*  */
-	/*  Disable BAR, suggested by Scott */
-	/*  2010.04.09 add by hpfan */
-	/*  */
-	rtl8723au_write32(Adapter, REG_BAR_MODE_CTRL, 0x0201ffff);
-
-	if (pregistrypriv->wifi_spec)
-		rtl8723au_write16(Adapter, REG_FAST_EDCA_CTRL, 0);
-
-	/*  Move by Neo for USB SS from above setp */
-	_RfPowerSave(Adapter);
-
-	/*  2010/08/26 MH Merge from 8192CE. */
-	/* sherry masked that it has been done in _RfPowerSave */
-	/* 20110927 */
-	/* recovery for 8192cu and 9723Au 20111017 */
-	if (pwrctrlpriv->rf_pwrstate == rf_on) {
-		if (pHalData->bIQKInitialized) {
-			rtl8723a_phy_iq_calibrate(Adapter, true);
-		} else {
-			rtl8723a_phy_iq_calibrate(Adapter, false);
-			pHalData->bIQKInitialized = true;
-		}
-
-		rtl8723a_odm_check_tx_power_tracking(Adapter);
-
-		rtl8723a_phy_lc_calibrate(Adapter);
-
-		rtl8723a_dual_antenna_detection(Adapter);
-	}
-
-	/* fixed USB interface interference issue */
-	rtl8723au_write8(Adapter, 0xfe40, 0xe0);
-	rtl8723au_write8(Adapter, 0xfe41, 0x8d);
-	rtl8723au_write8(Adapter, 0xfe42, 0x80);
-	rtl8723au_write32(Adapter, 0x20c, 0xfd0320);
-	/* Solve too many protocol error on USB bus */
-	if (!IS_81xxC_VENDOR_UMC_A_CUT(pHalData->VersionID)) {
-		/*  0xE6 = 0x94 */
-		rtl8723au_write8(Adapter, 0xFE40, 0xE6);
-		rtl8723au_write8(Adapter, 0xFE41, 0x94);
-		rtl8723au_write8(Adapter, 0xFE42, 0x80);
-
-		/*  0xE0 = 0x19 */
-		rtl8723au_write8(Adapter, 0xFE40, 0xE0);
-		rtl8723au_write8(Adapter, 0xFE41, 0x19);
-		rtl8723au_write8(Adapter, 0xFE42, 0x80);
-
-		/*  0xE5 = 0x91 */
-		rtl8723au_write8(Adapter, 0xFE40, 0xE5);
-		rtl8723au_write8(Adapter, 0xFE41, 0x91);
-		rtl8723au_write8(Adapter, 0xFE42, 0x80);
-
-		/*  0xE2 = 0x81 */
-		rtl8723au_write8(Adapter, 0xFE40, 0xE2);
-		rtl8723au_write8(Adapter, 0xFE41, 0x81);
-		rtl8723au_write8(Adapter, 0xFE42, 0x80);
-
-	}
-
-/*	_InitPABias(Adapter); */
-
-	/*  Init BT hw config. */
-	rtl8723a_BT_init_hwconfig(Adapter);
-
-	rtl8723a_InitHalDm(Adapter);
-
-	val8 = DIV_ROUND_UP(WiFiNavUpperUs, HAL_8723A_NAV_UPPER_UNIT);
-	rtl8723au_write8(Adapter, REG_NAV_UPPER, val8);
-
-	/*  2011/03/09 MH debug only, UMC-B cut pass 2500 S5 test, but we need to fin root cause. */
-	if (((rtl8723au_read32(Adapter, rFPGA0_RFMOD) & 0xFF000000) !=
-	     0x83000000)) {
-		PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(24), 1);
-		RT_TRACE(_module_hci_hal_init_c_, _drv_err_,
-			 "%s: IQK fail recover\n", __func__);
-	}
-
-	/* ack for xmit mgmt frames. */
-	rtl8723au_write32(Adapter, REG_FWHW_TXQ_CTRL,
-			  rtl8723au_read32(Adapter, REG_FWHW_TXQ_CTRL)|BIT(12));
-
-exit:
-	if (status == _SUCCESS) {
-		Adapter->hw_init_completed = true;
-
-		if (Adapter->registrypriv.notch_filter == 1)
-			rtl8723a_notch_filter(Adapter, 1);
-	}
-
-	DBG_8723A("%s in %dms\n", __func__,
-		  jiffies_to_msecs(jiffies - init_start_time));
-	return status;
-}
-
-static void phy_SsPwrSwitch92CU(struct rtw_adapter *Adapter,
-				enum rt_rf_power_state eRFPowerState)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-	u8 sps0;
-
-	sps0 = rtl8723au_read8(Adapter, REG_SPS0_CTRL);
-
-	switch (eRFPowerState) {
-	case rf_on:
-		/*  1. Enable MAC Clock. Can not be enabled now. */
-		/* WriteXBYTE(REG_SYS_CLKR+1,
-		   ReadXBYTE(REG_SYS_CLKR+1) | BIT(3)); */
-
-		/*  2. Force PWM, Enable SPS18_LDO_Marco_Block */
-		rtl8723au_write8(Adapter, REG_SPS0_CTRL,
-				 sps0 | BIT(0) | BIT(3));
-
-		/*  3. restore BB, AFE control register. */
-		/* RF */
-		if (pHalData->rf_type ==  RF_2T2R)
-			PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
-				     0x380038, 1);
-		else
-			PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
-				     0x38, 1);
-		PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 1);
-		PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(1), 0);
-
-		/* AFE */
-		if (pHalData->rf_type ==  RF_2T2R)
-			rtl8723au_write32(Adapter, rRx_Wait_CCA, 0x63DB25A0);
-		else if (pHalData->rf_type ==  RF_1T1R)
-			rtl8723au_write32(Adapter, rRx_Wait_CCA, 0x631B25A0);
-
-		/*  4. issue 3-wire command that RF set to Rx idle
-		    mode. This is used to re-write the RX idle mode. */
-		/*  We can only prvide a usual value instead and then
-		    HW will modify the value by itself. */
-		PHY_SetRFReg(Adapter, RF_PATH_A, RF_AC,
-			     bRFRegOffsetMask, 0x32D95);
-		if (pHalData->rf_type ==  RF_2T2R) {
-			PHY_SetRFReg(Adapter, RF_PATH_B, RF_AC,
-				     bRFRegOffsetMask, 0x32D95);
-		}
-		break;
-	case rf_sleep:
-	case rf_off:
-		if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID))
-			sps0 &= ~BIT(0);
-		else
-			sps0 &= ~(BIT(0) | BIT(3));
-
-		RT_TRACE(_module_hal_init_c_, _drv_err_, "SS LVL1\n");
-		/*  Disable RF and BB only for SelectSuspend. */
-
-		/*  1. Set BB/RF to shutdown. */
-		/*	(1) Reg878[5:3]= 0	RF rx_code for
-						preamble power saving */
-		/*	(2)Reg878[21:19]= 0	Turn off RF-B */
-		/*	(3) RegC04[7:4]= 0	Turn off all paths
-						for packet detection */
-		/*	(4) Reg800[1] = 1	enable preamble power saving */
-		Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF0] =
-			rtl8723au_read32(Adapter, rFPGA0_XAB_RFParameter);
-		Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF1] =
-			rtl8723au_read32(Adapter, rOFDM0_TRxPathEnable);
-		Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF2] =
-			rtl8723au_read32(Adapter, rFPGA0_RFMOD);
-		if (pHalData->rf_type ==  RF_2T2R)
-			PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
-				     0x380038, 0);
-		else if (pHalData->rf_type ==  RF_1T1R)
-			PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x38, 0);
-		PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 0);
-		PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(1), 1);
-
-		/*  2 .AFE control register to power down. bit[30:22] */
-		Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_AFE0] =
-			rtl8723au_read32(Adapter, rRx_Wait_CCA);
-		if (pHalData->rf_type ==  RF_2T2R)
-			rtl8723au_write32(Adapter, rRx_Wait_CCA, 0x00DB25A0);
-		else if (pHalData->rf_type ==  RF_1T1R)
-			rtl8723au_write32(Adapter, rRx_Wait_CCA, 0x001B25A0);
-
-		/*  3. issue 3-wire command that RF set to power down.*/
-		PHY_SetRFReg(Adapter, RF_PATH_A, RF_AC, bRFRegOffsetMask, 0);
-		if (pHalData->rf_type ==  RF_2T2R)
-			PHY_SetRFReg(Adapter, RF_PATH_B, RF_AC,
-				     bRFRegOffsetMask, 0);
-
-		/*  4. Force PFM , disable SPS18_LDO_Marco_Block */
-		rtl8723au_write8(Adapter, REG_SPS0_CTRL, sps0);
-		break;
-	default:
-		break;
-	}
-}
-
-static void CardDisableRTL8723U(struct rtw_adapter *Adapter)
-{
-	u8		u1bTmp;
-
-	DBG_8723A("CardDisableRTL8723U\n");
-	/*  USB-MF Card Disable Flow */
-	/*  1. Run LPS WL RFOFF flow */
-	HalPwrSeqCmdParsing23a(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-			    PWR_INTF_USB_MSK, rtl8723AU_enter_lps_flow);
-
-	/*  2. 0x1F[7:0] = 0		turn off RF */
-	rtl8723au_write8(Adapter, REG_RF_CTRL, 0x00);
-
-	/*	==== Reset digital sequence   ====== */
-	if ((rtl8723au_read8(Adapter, REG_MCUFWDL) & BIT(7)) &&
-	    Adapter->bFWReady) /* 8051 RAM code */
-		rtl8723a_FirmwareSelfReset(Adapter);
-
-	/*  Reset MCU. Suggested by Filen. 2011.01.26. by tynli. */
-	u1bTmp = rtl8723au_read8(Adapter, REG_SYS_FUNC_EN+1);
-	rtl8723au_write8(Adapter, REG_SYS_FUNC_EN+1, u1bTmp & ~BIT(2));
-
-	/*  g.	MCUFWDL 0x80[1:0]= 0		reset MCU ready status */
-	rtl8723au_write8(Adapter, REG_MCUFWDL, 0x00);
-
-	/*	==== Reset digital sequence end ====== */
-	/*  Card disable power action flow */
-	HalPwrSeqCmdParsing23a(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-			       PWR_INTF_USB_MSK,
-			       rtl8723AU_card_disable_flow);
-
-	/*  Reset MCU IO Wrapper, added by Roger, 2011.08.30. */
-	u1bTmp = rtl8723au_read8(Adapter, REG_RSV_CTRL + 1);
-	rtl8723au_write8(Adapter, REG_RSV_CTRL+1, u1bTmp & ~BIT(0));
-	u1bTmp = rtl8723au_read8(Adapter, REG_RSV_CTRL + 1);
-	rtl8723au_write8(Adapter, REG_RSV_CTRL+1, u1bTmp | BIT(0));
-
-	/*  7. RSV_CTRL 0x1C[7:0] = 0x0E  lock ISO/CLK/Power control register */
-	rtl8723au_write8(Adapter, REG_RSV_CTRL, 0x0e);
-}
-
-int rtl8723au_hal_deinit(struct rtw_adapter *padapter)
-{
-	DBG_8723A("==> %s\n", __func__);
-
-#ifdef CONFIG_8723AU_BT_COEXIST
-	BT_HaltProcess(padapter);
-#endif
-	/*  2011/02/18 To Fix RU LNA  power leakage problem. We need to
-	    execute below below in Adapter init and halt sequence.
-	    According to EEchou's opinion, we can enable the ability for all */
-	/*  IC. Accord to johnny's opinion, only RU need the support. */
-	CardDisableRTL8723U(padapter);
-
-	padapter->hw_init_completed = false;
-
-	return _SUCCESS;
-}
-
-int rtl8723au_inirp_init(struct rtw_adapter *Adapter)
-{
-	u8 i;
-	struct recv_buf *precvbuf;
-	int status;
-	struct recv_priv *precvpriv = &Adapter->recvpriv;
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-
-	status = _SUCCESS;
-
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_, "===> usb_inirp_init\n");
-
-	/* issue Rx irp to receive data */
-	precvbuf = (struct recv_buf *)precvpriv->precv_buf;
-	for (i = 0; i < NR_RECVBUFF; i++) {
-		if (rtl8723au_read_port(Adapter, 0, precvbuf) == _FAIL) {
-			RT_TRACE(_module_hci_hal_init_c_, _drv_err_,
-				 "usb_rx_init: usb_read_port error\n");
-			status = _FAIL;
-			goto exit;
-		}
-		precvbuf++;
-	}
-	if (rtl8723au_read_interrupt(Adapter) == _FAIL) {
-		RT_TRACE(_module_hci_hal_init_c_, _drv_err_,
-			 "%s: usb_read_interrupt error\n", __func__);
-		status = _FAIL;
-	}
-	pHalData->IntrMask[0] = rtl8723au_read32(Adapter, REG_USB_HIMR);
-	MSG_8723A("pHalData->IntrMask = 0x%04x\n", pHalData->IntrMask[0]);
-	pHalData->IntrMask[0] |= UHIMR_C2HCMD|UHIMR_CPWM;
-	rtl8723au_write32(Adapter, REG_USB_HIMR, pHalData->IntrMask[0]);
-exit:
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 "<=== usb_inirp_init\n");
-	return status;
-}
-
-int rtl8723au_inirp_deinit(struct rtw_adapter *Adapter)
-{
-	struct hal_data_8723a	*pHalData = GET_HAL_DATA(Adapter);
-
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 "===> usb_rx_deinit\n");
-	rtl8723au_read_port_cancel(Adapter);
-	pHalData->IntrMask[0] = rtl8723au_read32(Adapter, REG_USB_HIMR);
-	MSG_8723A("%s pHalData->IntrMask = 0x%04x\n", __func__,
-		  pHalData->IntrMask[0]);
-	pHalData->IntrMask[0] = 0x0;
-	rtl8723au_write32(Adapter, REG_USB_HIMR, pHalData->IntrMask[0]);
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 "<=== usb_rx_deinit\n");
-	return _SUCCESS;
-}
-
-static void _ReadBoardType(struct rtw_adapter *Adapter, u8 *PROMContent,
-			   bool AutoloadFail)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-	u8 boardType = BOARD_USB_DONGLE;
-
-	if (AutoloadFail) {
-		if (IS_8723_SERIES(pHalData->VersionID))
-			pHalData->rf_type = RF_1T1R;
-		else
-			pHalData->rf_type = RF_2T2R;
-		pHalData->BoardType = boardType;
-		return;
-	}
-
-	boardType = PROMContent[EEPROM_NORMAL_BoardType];
-	boardType &= BOARD_TYPE_NORMAL_MASK;/* bit[7:5] */
-	boardType >>= 5;
-
-	pHalData->BoardType = boardType;
-	MSG_8723A("_ReadBoardType(%x)\n", pHalData->BoardType);
-
-	if (boardType == BOARD_USB_High_PA)
-		pHalData->ExternalPA = 1;
-}
-
-static void Hal_EfuseParseMACAddr_8723AU(struct rtw_adapter *padapter,
-					 u8 *hwinfo, bool AutoLoadFail)
-{
-	u16 i;
-	u8 sMacAddr[ETH_ALEN] = {0x00, 0xE0, 0x4C, 0x87, 0x23, 0x00};
-	struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
-
-	if (AutoLoadFail) {
-		for (i = 0; i < 6; i++)
-			pEEPROM->mac_addr[i] = sMacAddr[i];
-	} else {
-		/* Read Permanent MAC address */
-		memcpy(pEEPROM->mac_addr, &hwinfo[EEPROM_MAC_ADDR_8723AU],
-		       ETH_ALEN);
-	}
-
-	RT_TRACE(_module_hci_hal_init_c_, _drv_notice_,
-		 "Hal_EfuseParseMACAddr_8723AU: Permanent Address =%pM\n",
-		 pEEPROM->mac_addr);
-}
-
-static void readAdapterInfo(struct rtw_adapter *padapter)
-{
-	struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
-	/* struct hal_data_8723a * pHalData = GET_HAL_DATA(padapter); */
-	u8 hwinfo[HWSET_MAX_SIZE];
-
-	Hal_InitPGData(padapter, hwinfo);
-	Hal_EfuseParseIDCode(padapter, hwinfo);
-	Hal_EfuseParseEEPROMVer(padapter, hwinfo,
-				pEEPROM->bautoload_fail_flag);
-	Hal_EfuseParseMACAddr_8723AU(padapter, hwinfo,
-				     pEEPROM->bautoload_fail_flag);
-	Hal_EfuseParsetxpowerinfo_8723A(padapter, hwinfo,
-					pEEPROM->bautoload_fail_flag);
-	_ReadBoardType(padapter, hwinfo, pEEPROM->bautoload_fail_flag);
-	Hal_EfuseParseBTCoexistInfo_8723A(padapter, hwinfo,
-					  pEEPROM->bautoload_fail_flag);
-
-	rtl8723a_EfuseParseChnlPlan(padapter, hwinfo,
-				    pEEPROM->bautoload_fail_flag);
-	Hal_EfuseParseThermalMeter_8723A(padapter, hwinfo,
-					 pEEPROM->bautoload_fail_flag);
-/*	_ReadRFSetting(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); */
-/*	_ReadPSSetting(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); */
-	Hal_EfuseParseAntennaDiversity(padapter, hwinfo,
-				       pEEPROM->bautoload_fail_flag);
-
-	Hal_EfuseParseEEPROMVer(padapter, hwinfo, pEEPROM->bautoload_fail_flag);
-	Hal_EfuseParseCustomerID(padapter, hwinfo,
-				 pEEPROM->bautoload_fail_flag);
-	Hal_EfuseParseRateIndicationOption(padapter, hwinfo,
-					   pEEPROM->bautoload_fail_flag);
-	Hal_EfuseParseXtal_8723A(padapter, hwinfo,
-				 pEEPROM->bautoload_fail_flag);
-
-	/* hal_CustomizedBehavior_8723U(Adapter); */
-
-/*	Adapter->bDongle = (PROMContent[EEPROM_EASY_REPLACEMENT] == 1)? 0: 1; */
-	DBG_8723A("%s(): REPLACEMENT = %x\n", __func__, padapter->bDongle);
-}
-
-static void _ReadPROMContent(struct rtw_adapter *Adapter)
-{
-	struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter);
-	u8 eeValue;
-
-	eeValue = rtl8723au_read8(Adapter, REG_9346CR);
-	/*  To check system boot selection. */
-	pEEPROM->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? true : false;
-	pEEPROM->bautoload_fail_flag = (eeValue & EEPROM_EN) ? false : true;
-
-	DBG_8723A("Boot from %s, Autoload %s !\n",
-		  (pEEPROM->EepromOrEfuse ? "EEPROM" : "EFUSE"),
-		  (pEEPROM->bautoload_fail_flag ? "Fail" : "OK"));
-
-	readAdapterInfo(Adapter);
-}
-
-/*  */
-/*	Description: */
-/*		We should set Efuse cell selection to WiFi cell in default. */
-/*  */
-/*	Assumption: */
-/*		PASSIVE_LEVEL */
-/*  */
-/*	Added by Roger, 2010.11.23. */
-/*  */
-static void hal_EfuseCellSel(struct rtw_adapter *Adapter)
-{
-	u32 value32;
-
-	value32 = rtl8723au_read32(Adapter, EFUSE_TEST);
-	value32 = (value32 & ~EFUSE_SEL_MASK) | EFUSE_SEL(EFUSE_WIFI_SEL_0);
-	rtl8723au_write32(Adapter, EFUSE_TEST, value32);
-}
-
-void rtl8723a_read_adapter_info(struct rtw_adapter *Adapter)
-{
-	unsigned long start = jiffies;
-
-	/*  Read EEPROM size before call any EEPROM function */
-	Adapter->EepromAddressSize = GetEEPROMSize8723A(Adapter);
-
-	MSG_8723A("====> _ReadAdapterInfo8723AU\n");
-
-	hal_EfuseCellSel(Adapter);
-
-	_ReadPROMContent(Adapter);
-
-	MSG_8723A("<==== _ReadAdapterInfo8723AU in %d ms\n",
-		  jiffies_to_msecs(jiffies - start));
-}
-
-/*  */
-/*	Description: */
-/*		Query setting of specified variable. */
-/*  */
-int GetHalDefVar8192CUsb(struct rtw_adapter *Adapter,
-			 enum hal_def_variable eVariable, void *pValue)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-	int bResult = _SUCCESS;
-
-	switch (eVariable) {
-	case HAL_DEF_UNDERCORATEDSMOOTHEDPWDB:
-		*((int *)pValue) = pHalData->dmpriv.UndecoratedSmoothedPWDB;
-		break;
-	case HAL_DEF_IS_SUPPORT_ANT_DIV:
-		break;
-	case HAL_DEF_CURRENT_ANTENNA:
-		break;
-	case HAL_DEF_DRVINFO_SZ:
-		*((u32 *)pValue) = DRVINFO_SZ;
-		break;
-	case HAL_DEF_MAX_RECVBUF_SZ:
-		*((u32 *)pValue) = MAX_RECVBUF_SZ;
-		break;
-	case HAL_DEF_RX_PACKET_OFFSET:
-		*((u32 *)pValue) = RXDESC_SIZE + DRVINFO_SZ;
-		break;
-	case HAL_DEF_DBG_DUMP_RXPKT:
-		*((u8 *)pValue) = pHalData->bDumpRxPkt;
-		break;
-	case HAL_DEF_DBG_DM_FUNC:
-		*((u32 *)pValue) = pHalData->odmpriv.SupportAbility;
-		break;
-	case HW_VAR_MAX_RX_AMPDU_FACTOR:
-		*((u32 *)pValue) = IEEE80211_HT_MAX_AMPDU_64K;
-		break;
-	case HW_DEF_ODM_DBG_FLAG:
-	{
-		struct dm_odm_t	*pDM_Odm = &pHalData->odmpriv;
-		printk("pDM_Odm->DebugComponents = 0x%llx\n",
-		       pDM_Odm->DebugComponents);
-	}
-		break;
-	default:
-		bResult = _FAIL;
-		break;
-	}
-
-	return bResult;
-}
-
-void rtl8723a_update_ramask(struct rtw_adapter *padapter,
-			    u32 mac_id, u8 rssi_level)
-{
-	struct sta_info	*psta;
-	struct FW_Sta_Info *fw_sta;
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-	struct dm_priv *pdmpriv = &pHalData->dmpriv;
-	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
-	struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
-	struct wlan_bssid_ex *cur_network = &pmlmeinfo->network;
-	u8 init_rate, networkType, raid, arg;
-	u32 mask, rate_bitmap;
-	u8 shortGIrate = false;
-	int supportRateNum;
-
-	if (mac_id >= NUM_STA) /* CAM_SIZE */
-		return;
-
-	psta = pmlmeinfo->FW_sta_info[mac_id].psta;
-	if (psta == NULL)
-		return;
-
-	switch (mac_id) {
-	case 0:/*  for infra mode */
-		supportRateNum =
-			rtw_get_rateset_len23a(cur_network->SupportedRates);
-		networkType = judge_network_type23a(padapter,
-						 cur_network->SupportedRates,
-						 supportRateNum) & 0xf;
-		/* pmlmeext->cur_wireless_mode = networkType; */
-		raid = networktype_to_raid23a(networkType);
-
-		mask = update_supported_rate23a(cur_network->SupportedRates,
-					     supportRateNum);
-		mask |= (pmlmeinfo->HT_enable) ?
-			update_MSC_rate23a(&pmlmeinfo->ht_cap) : 0;
-
-		if (support_short_GI23a(padapter, &pmlmeinfo->ht_cap))
-			shortGIrate = true;
-		break;
-
-	case 1:/* for broadcast/multicast */
-		fw_sta = &pmlmeinfo->FW_sta_info[mac_id]; 
-		supportRateNum = rtw_get_rateset_len23a(fw_sta->SupportedRates);
-		if (pmlmeext->cur_wireless_mode & WIRELESS_11B)
-			networkType = WIRELESS_11B;
-		else
-			networkType = WIRELESS_11G;
-		raid = networktype_to_raid23a(networkType);
-
-		mask = update_basic_rate23a(cur_network->SupportedRates,
-					 supportRateNum);
-		break;
-
-	default: /* for each sta in IBSS */
-		fw_sta = &pmlmeinfo->FW_sta_info[mac_id]; 
-		supportRateNum = rtw_get_rateset_len23a(fw_sta->SupportedRates);
-		networkType = judge_network_type23a(padapter,
-						    fw_sta->SupportedRates,
-						    supportRateNum) & 0xf;
-		/* pmlmeext->cur_wireless_mode = networkType; */
-		raid = networktype_to_raid23a(networkType);
-
-		mask = update_supported_rate23a(cur_network->SupportedRates,
-						supportRateNum);
-
-		/* todo: support HT in IBSS */
-		break;
-	}
-
-	/* mask &= 0x0fffffff; */
-	rate_bitmap = ODM_Get_Rate_Bitmap23a(pHalData, mac_id, mask,
-					     rssi_level);
-	DBG_8723A("%s => mac_id:%d, networkType:0x%02x, "
-		  "mask:0x%08x\n\t ==> rssi_level:%d, rate_bitmap:0x%08x\n",
-		  __func__, mac_id, networkType, mask, rssi_level, rate_bitmap);
-
-	mask &= rate_bitmap;
-	mask |= ((raid << 28) & 0xf0000000);
-
-	init_rate = get_highest_rate_idx23a(mask) & 0x3f;
-
-	arg = mac_id & 0x1f;/* MACID */
-	arg |= BIT(7);
-
-	if (shortGIrate == true)
-		arg |= BIT(5);
-
-	DBG_8723A("update raid entry, mask = 0x%x, arg = 0x%x\n", mask, arg);
-
-	rtl8723a_set_raid_cmd(padapter, mask, arg);
-
-	/* set ra_id */
-	psta->raid = raid;
-	psta->init_rate = init_rate;
-
-	/* set correct initial date rate for each mac_id */
-	pdmpriv->INIDATA_RATE[mac_id] = init_rate;
-}