Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

9 files changed, 177 insertions, 135 deletions

diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index 5a317cc98a4b..02860d3ec365 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -56,7 +56,6 @@ static unsigned int get_mxclk_freq(void)
 static void set_chip_clock(unsigned int frequency)
 {
 	struct pll_value pll;
-	unsigned int actual_mx_clk;
 
 	/* Cheok_0509: For SM750LE, the chip clock is fixed. Nothing to set. */
 	if (sm750_get_chip_type() == SM750LE)
@@ -66,8 +65,8 @@ static void set_chip_clock(unsigned int frequency)
 		/*
 		 * Set up PLL structure to hold the value to be set in clocks.
 		 */
-		pll.inputFreq = DEFAULT_INPUT_CLOCK; /* Defined in CLOCK.H */
-		pll.clockType = MXCLK_PLL;
+		pll.input_freq = DEFAULT_INPUT_CLOCK; /* Defined in CLOCK.H */
+		pll.clock_type = MXCLK_PLL;
 
 		/*
 		 * Call sm750_calc_pll_value() to fill the other fields
@@ -76,7 +75,7 @@ static void set_chip_clock(unsigned int frequency)
 		 * Return value of sm750_calc_pll_value gives the actual
 		 * possible clock.
 		 */
-		actual_mx_clk = sm750_calc_pll_value(frequency, &pll);
+		sm750_calc_pll_value(frequency, &pll);
 
 		/* Master Clock Control: MXCLK_PLL */
 		poke32(MXCLK_PLL_CTRL, sm750_format_pll_reg(&pll));
@@ -211,13 +210,13 @@ unsigned int ddk750_get_vm_size(void)
 	return data;
 }
 
-int ddk750_init_hw(struct initchip_param *pInitParam)
+int ddk750_init_hw(struct initchip_param *p_init_param)
 {
 	unsigned int reg;
 
-	if (pInitParam->powerMode != 0)
-		pInitParam->powerMode = 0;
-	sm750_set_power_mode(pInitParam->powerMode);
+	if (p_init_param->power_mode != 0)
+		p_init_param->power_mode = 0;
+	sm750_set_power_mode(p_init_param->power_mode);
 
 	/* Enable display power gate & LOCALMEM power gate*/
 	reg = peek32(CURRENT_GATE);
@@ -238,13 +237,13 @@ int ddk750_init_hw(struct initchip_param *pInitParam)
 	}
 
 	/* Set the Main Chip Clock */
-	set_chip_clock(MHz((unsigned int)pInitParam->chipClock));
+	set_chip_clock(MHz((unsigned int)p_init_param->chip_clock));
 
 	/* Set up memory clock. */
-	set_memory_clock(MHz(pInitParam->memClock));
+	set_memory_clock(MHz(p_init_param->mem_clock));
 
 	/* Set up master clock */
-	set_master_clock(MHz(pInitParam->masterClock));
+	set_master_clock(MHz(p_init_param->master_clock));
 
 	/*
 	 * Reset the memory controller.
@@ -252,7 +251,7 @@ int ddk750_init_hw(struct initchip_param *pInitParam)
 	 * the system might hang when sw accesses the memory.
 	 * The memory should be resetted after changing the MXCLK.
 	 */
-	if (pInitParam->resetMemory == 1) {
+	if (p_init_param->reset_memory == 1) {
 		reg = peek32(MISC_CTRL);
 		reg &= ~MISC_CTRL_LOCALMEM_RESET;
 		poke32(MISC_CTRL, reg);
@@ -261,7 +260,7 @@ int ddk750_init_hw(struct initchip_param *pInitParam)
 		poke32(MISC_CTRL, reg);
 	}
 
-	if (pInitParam->setAllEngOff == 1) {
+	if (p_init_param->set_all_eng_off == 1) {
 		sm750_enable_2d_engine(0);
 
 		/* Disable Overlay, if a former application left it on */
@@ -337,13 +336,13 @@ unsigned int sm750_calc_pll_value(unsigned int request_orig,
 	ret = 0;
 	mini_diff = ~0;
 	request = request_orig / 1000;
-	input = pll->inputFreq / 1000;
+	input = pll->input_freq / 1000;
 
 	/*
 	 * for MXCLK register,
 	 * no POD provided, so need be treated differently
 	 */
-	if (pll->clockType == MXCLK_PLL)
+	if (pll->clock_type == MXCLK_PLL)
 		max_d = 3;
 
 	for (N = 15; N > 1; N--) {
@@ -365,7 +364,7 @@ unsigned int sm750_calc_pll_value(unsigned int request_orig,
 			if (M < 256 && M > 0) {
 				unsigned int diff;
 
-				tmp_clock = pll->inputFreq * M / N / X;
+				tmp_clock = pll->input_freq * M / N / X;
 				diff = abs(tmp_clock - request_orig);
 				if (diff < mini_diff) {
 					pll->M = M;
@@ -383,14 +382,14 @@ unsigned int sm750_calc_pll_value(unsigned int request_orig,
 	return ret;
 }
 
-unsigned int sm750_format_pll_reg(struct pll_value *pPLL)
+unsigned int sm750_format_pll_reg(struct pll_value *p_PLL)
 {
 #ifndef VALIDATION_CHIP
-	unsigned int POD = pPLL->POD;
+	unsigned int POD = p_PLL->POD;
 #endif
-	unsigned int OD = pPLL->OD;
-	unsigned int M = pPLL->M;
-	unsigned int N = pPLL->N;
+	unsigned int OD = p_PLL->OD;
+	unsigned int M = p_PLL->M;
+	unsigned int N = p_PLL->N;
 
 	/*
 	 * Note that all PLL's have the same format. Here, we just use
diff --git a/drivers/staging/sm750fb/ddk750_chip.h b/drivers/staging/sm750fb/ddk750_chip.h
index 3e92b3297160..ee2e9d90f7dd 100644
--- a/drivers/staging/sm750fb/ddk750_chip.h
+++ b/drivers/staging/sm750fb/ddk750_chip.h
@@ -40,8 +40,8 @@ enum clock_type {
 };
 
 struct pll_value {
-	enum clock_type clockType;
-	unsigned long inputFreq; /* Input clock frequency to the PLL */
+	enum clock_type clock_type;
+	unsigned long input_freq; /* Input clock frequency to the PLL */
 
 	/* Use this when clockType = PANEL_PLL */
 	unsigned long M;
@@ -53,41 +53,41 @@ struct pll_value {
 /* input struct to initChipParam() function */
 struct initchip_param {
 	/* Use power mode 0 or 1 */
-	unsigned short powerMode;
+	unsigned short power_mode;
 
 	/*
 	 * Speed of main chip clock in MHz unit
 	 * 0 = keep the current clock setting
 	 * Others = the new main chip clock
 	 */
-	unsigned short chipClock;
+	unsigned short chip_clock;
 
 	/*
 	 * Speed of memory clock in MHz unit
 	 * 0 = keep the current clock setting
 	 * Others = the new memory clock
 	 */
-	unsigned short memClock;
+	unsigned short mem_clock;
 
 	/*
 	 * Speed of master clock in MHz unit
 	 * 0 = keep the current clock setting
 	 * Others = the new master clock
 	 */
-	unsigned short masterClock;
+	unsigned short master_clock;
 
 	/*
 	 * 0 = leave all engine state untouched.
 	 * 1 = make sure they are off: 2D, Overlay,
 	 * video alpha, alpha, hardware cursors
 	 */
-	unsigned short setAllEngOff;
+	unsigned short set_all_eng_off;
 
 	/*
 	 * 0 = Do not reset the memory controller
 	 * 1 = Reset the memory controller
 	 */
-	unsigned char resetMemory;
+	unsigned char reset_memory;
 
 	/* More initialization parameter can be added if needed */
 };
@@ -95,7 +95,7 @@ struct initchip_param {
 enum logical_chip_type sm750_get_chip_type(void);
 void sm750_set_chip_type(unsigned short dev_id, u8 rev_id);
 unsigned int sm750_calc_pll_value(unsigned int request, struct  pll_value *pll);
-unsigned int sm750_format_pll_reg(struct pll_value *pPLL);
+unsigned int sm750_format_pll_reg(struct pll_value *p_PLL);
 unsigned int ddk750_get_vm_size(void);
 int ddk750_init_hw(struct initchip_param *pinit_param);
 
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index 887ea8aef43f..172624ff98b0 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -147,8 +147,8 @@ void ddk750_set_logical_disp_out(enum disp_output output)
 
 	if (output & PNL_SEQ_USAGE) {
 		/* set  panel sequence */
-		sw_panel_power_sequence((output & PNL_SEQ_MASK) >> PNL_SEQ_OFFSET,
-		4);
+		sw_panel_power_sequence((output & PNL_SEQ_MASK) >>
+					PNL_SEQ_OFFSET, 4);
 	}
 
 	if (output & DAC_USAGE)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 4dac691ad1b1..e00a6cb31947 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -13,8 +13,9 @@
  * HW only supports 7 predefined pixel clocks, and clock select is
  * in bit 29:27 of Display Control register.
  */
-static unsigned long displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
-						  unsigned long dispControl)
+static unsigned long
+displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
+			     unsigned long dispControl)
 {
 	unsigned long x, y;
 
@@ -81,7 +82,7 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
 	int cnt = 0;
 	unsigned int tmp, reg;
 
-	if (pll->clockType == SECONDARY_PLL) {
+	if (pll->clock_type == SECONDARY_PLL) {
 		/* programe secondary pixel clock */
 		poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
 
@@ -134,7 +135,7 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
 			poke32(CRT_DISPLAY_CTRL, tmp | reg);
 		}
 
-	} else if (pll->clockType == PRIMARY_PLL) {
+	} else if (pll->clock_type == PRIMARY_PLL) {
 		unsigned int reserved;
 
 		poke32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
@@ -209,12 +210,11 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
 int ddk750_setModeTiming(struct mode_parameter *parm, enum clock_type clock)
 {
 	struct pll_value pll;
-	unsigned int uiActualPixelClk;
 
-	pll.inputFreq = DEFAULT_INPUT_CLOCK;
-	pll.clockType = clock;
+	pll.input_freq = DEFAULT_INPUT_CLOCK;
+	pll.clock_type = clock;
 
-	uiActualPixelClk = sm750_calc_pll_value(parm->pixel_clock, &pll);
+	sm750_calc_pll_value(parm->pixel_clock, &pll);
 	if (sm750_get_chip_type() == SM750LE) {
 		/* set graphic mode via IO method */
 		outb_p(0x88, 0x3d4);
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index c8e856c13912..73e0e9f41ec5 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -39,8 +39,10 @@ unsigned short sii164GetVendorID(void)
 {
 	unsigned short vendorID;
 
-	vendorID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_HIGH) << 8) |
-		    (unsigned short)i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_LOW);
+	vendorID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+					       SII164_VENDOR_ID_HIGH) << 8) |
+		   (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+					      SII164_VENDOR_ID_LOW);
 
 	return vendorID;
 }
@@ -56,13 +58,18 @@ unsigned short sii164GetDeviceID(void)
 {
 	unsigned short deviceID;
 
-	deviceID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_HIGH) << 8) |
-		    (unsigned short)i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_LOW);
+	deviceID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+					       SII164_DEVICE_ID_HIGH) << 8) |
+		   (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+					      SII164_DEVICE_ID_LOW);
 
 	return deviceID;
 }
 
-/* DVI.C will handle all SiI164 chip stuffs and try it best to make code minimal and useful */
+/*
+ *  DVI.C will handle all SiI164 chip stuffs and try its best to make code
+ *  minimal and useful
+ */
 
 /*
  *  sii164InitChip
@@ -133,7 +140,8 @@ long sii164InitChip(unsigned char edge_select,
 #endif
 
 	/* Check if SII164 Chip exists */
-	if ((sii164GetVendorID() == SII164_VENDOR_ID) && (sii164GetDeviceID() == SII164_DEVICE_ID)) {
+	if ((sii164GetVendorID() == SII164_VENDOR_ID) &&
+	    (sii164GetDeviceID() == SII164_DEVICE_ID)) {
 		/*
 		 *  Initialize SII164 controller chip.
 		 */
@@ -254,7 +262,9 @@ void sii164ResetChip(void)
 
 /*
  * sii164GetChipString
- *      This function returns a char string name of the current DVI Controller chip.
+ *      This function returns a char string name of the current DVI Controller
+ *      chip.
+ *
  *      It's convenient for application need to display the chip name.
  */
 char *sii164GetChipString(void)
@@ -330,8 +340,8 @@ void sii164EnableHotPlugDetection(unsigned char enableHotPlug)
 
 	detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
 
-	/* Depending on each DVI controller, need to enable the hot plug based on each
-	 * individual chip design.
+	/* Depending on each DVI controller, need to enable the hot plug based
+	 * on each individual chip design.
 	 */
 	if (enableHotPlug != 0)
 		sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI);
diff --git a/drivers/staging/sm750fb/ddk750_sii164.h b/drivers/staging/sm750fb/ddk750_sii164.h
index 862e7bf27353..d940cb729066 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.h
+++ b/drivers/staging/sm750fb/ddk750_sii164.h
@@ -6,10 +6,13 @@
 
 /* Hot Plug detection mode structure */
 enum sii164_hot_plug_mode {
-	SII164_HOTPLUG_DISABLE = 0,         /* Disable Hot Plug output bit (always high). */
-	SII164_HOTPLUG_USE_MDI,             /* Use Monitor Detect Interrupt bit. */
-	SII164_HOTPLUG_USE_RSEN,            /* Use Receiver Sense detect bit. */
-	SII164_HOTPLUG_USE_HTPLG            /* Use Hot Plug detect bit. */
+	SII164_HOTPLUG_DISABLE = 0,	/* Disable Hot Plug output bit
+					 * (always high).
+					 */
+
+	SII164_HOTPLUG_USE_MDI,         /* Use Monitor Detect Interrupt bit. */
+	SII164_HOTPLUG_USE_RSEN,        /* Use Receiver Sense detect bit. */
+	SII164_HOTPLUG_USE_HTPLG        /* Use Hot Plug detect bit. */
 };
 
 /* Silicon Image SiI164 chip prototype */
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index dbcbbd1055da..8faa601c700b 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -130,20 +130,28 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
 	return 0;
 }
 
-int sm750_hw_copyarea(
-struct lynx_accel *accel,
-unsigned int sBase,  /* Address of source: offset in frame buffer */
-unsigned int sPitch, /* Pitch value of source surface in BYTE */
-unsigned int sx,
-unsigned int sy,     /* Starting coordinate of source surface */
-unsigned int dBase,  /* Address of destination: offset in frame buffer */
-unsigned int dPitch, /* Pitch value of destination surface in BYTE */
-unsigned int Bpp,    /* Color depth of destination surface */
-unsigned int dx,
-unsigned int dy,     /* Starting coordinate of destination surface */
-unsigned int width,
-unsigned int height, /* width and height of rectangle in pixel value */
-unsigned int rop2)   /* ROP value */
+/**
+ * sm750_hm_copyarea
+ * @sBase: Address of source: offset in frame buffer
+ * @sPitch: Pitch value of source surface in BYTE
+ * @sx: Starting x coordinate of source surface
+ * @sy: Starting y coordinate of source surface
+ * @dBase: Address of destination: offset in frame buffer
+ * @dPitch: Pitch value of destination surface in BYTE
+ * @Bpp: Color depth of destination surface
+ * @dx: Starting x coordinate of destination surface
+ * @dy: Starting y coordinate of destination surface
+ * @width: width of rectangle in pixel value
+ * @height: height of rectangle in pixel value
+ * @rop2: ROP value
+ */
+int sm750_hw_copyarea(struct lynx_accel *accel,
+		      unsigned int sBase, unsigned int sPitch,
+		      unsigned int sx, unsigned int sy,
+		      unsigned int dBase, unsigned int dPitch,
+		      unsigned int Bpp, unsigned int dx, unsigned int dy,
+		      unsigned int width, unsigned int height,
+		      unsigned int rop2)
 {
 	unsigned int nDirection, de_ctrl;
 
@@ -216,7 +224,7 @@ unsigned int rop2)   /* ROP value */
 
 	/*
 	 * Note:
-	 * DE_FOREGROUND are DE_BACKGROUND are don't care.
+	 * DE_FOREGROUND and DE_BACKGROUND are don't care.
 	 * DE_COLOR_COMPARE and DE_COLOR_COMPARE_MAKS
 	 * are set by set deSetTransparency().
 	 */
@@ -235,21 +243,21 @@ unsigned int rop2)   /* ROP value */
 	 */
 	write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase); /* dpr44 */
 
-    /*
-     * Program pitch (distance between the 1st points of two adjacent lines).
-     * Note that input pitch is BYTE value, but the 2D Pitch register uses
-     * pixel values. Need Byte to pixel conversion.
-     */
+	/*
+	 * Program pitch (distance between the 1st points of two adjacent lines).
+	 * Note that input pitch is BYTE value, but the 2D Pitch register uses
+	 * pixel values. Need Byte to pixel conversion.
+	 */
 	write_dpr(accel, DE_PITCH,
 		  ((dPitch / Bpp << DE_PITCH_DESTINATION_SHIFT) &
 		   DE_PITCH_DESTINATION_MASK) |
 		  (sPitch / Bpp & DE_PITCH_SOURCE_MASK)); /* dpr10 */
 
-    /*
-     * Screen Window width in Pixels.
-     * 2D engine uses this value to calculate the linear address in frame buffer
-     * for a given point.
-     */
+	/*
+	 * Screen Window width in Pixels.
+	 * 2D engine uses this value to calculate the linear address in frame buffer
+	 * for a given point.
+	 */
 	write_dpr(accel, DE_WINDOW_WIDTH,
 		  ((dPitch / Bpp << DE_WINDOW_WIDTH_DST_SHIFT) &
 		   DE_WINDOW_WIDTH_DST_MASK) |
@@ -288,20 +296,28 @@ static unsigned int deGetTransparency(struct lynx_accel *accel)
 	return de_ctrl;
 }
 
-int sm750_hw_imageblit(struct lynx_accel *accel,
-		 const char *pSrcbuf, /* pointer to start of source buffer in system memory */
-		 u32 srcDelta,          /* Pitch value (in bytes) of the source buffer, +ive means top down and -ive mean button up */
-		 u32 startBit, /* Mono data can start at any bit in a byte, this value should be 0 to 7 */
-		 u32 dBase,    /* Address of destination: offset in frame buffer */
-		 u32 dPitch,   /* Pitch value of destination surface in BYTE */
-		 u32 bytePerPixel,      /* Color depth of destination surface */
-		 u32 dx,
-		 u32 dy,       /* Starting coordinate of destination surface */
-		 u32 width,
-		 u32 height,   /* width and height of rectangle in pixel value */
-		 u32 fColor,   /* Foreground color (corresponding to a 1 in the monochrome data */
-		 u32 bColor,   /* Background color (corresponding to a 0 in the monochrome data */
-		 u32 rop2)     /* ROP value */
+/**
+ * sm750_hw_imageblit
+ * @pSrcbuf: pointer to start of source buffer in system memory
+ * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top down
+ *	      and -ive mean button up
+ * @startBit: Mono data can start at any bit in a byte, this value should be
+ *	      0 to 7
+ * @dBase: Address of destination: offset in frame buffer
+ * @dPitch: Pitch value of destination surface in BYTE
+ * @bytePerPixel: Color depth of destination surface
+ * @dx: Starting x coordinate of destination surface
+ * @dy: Starting y coordinate of destination surface
+ * @width: width of rectangle in pixel value
+ * @height: height of rectangle in pixel value
+ * @fColor: Foreground color (corresponding to a 1 in the monochrome data
+ * @bColor: Background color (corresponding to a 0 in the monochrome data
+ * @rop2: ROP value
+ */
+int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
+		       u32 srcDelta, u32 startBit, u32 dBase, u32 dPitch,
+		       u32 bytePerPixel, u32 dx, u32 dy, u32 width,
+		       u32 height, u32 fColor, u32 bColor, u32 rop2)
 {
 	unsigned int ulBytesPerScan;
 	unsigned int ul4BytesPerScan;
diff --git a/drivers/staging/sm750fb/sm750_accel.h b/drivers/staging/sm750fb/sm750_accel.h
index c4f42002a50f..2c79cb730a0a 100644
--- a/drivers/staging/sm750fb/sm750_accel.h
+++ b/drivers/staging/sm750fb/sm750_accel.h
@@ -190,37 +190,54 @@ void sm750_hw_set2dformat(struct lynx_accel *accel, int fmt);
 void sm750_hw_de_init(struct lynx_accel *accel);
 
 int sm750_hw_fillrect(struct lynx_accel *accel,
-				u32 base, u32 pitch, u32 Bpp,
-				u32 x, u32 y, u32 width, u32 height,
-				u32 color, u32 rop);
-
-int sm750_hw_copyarea(
-struct lynx_accel *accel,
-unsigned int sBase,  /* Address of source: offset in frame buffer */
-unsigned int sPitch, /* Pitch value of source surface in BYTE */
-unsigned int sx,
-unsigned int sy,     /* Starting coordinate of source surface */
-unsigned int dBase,  /* Address of destination: offset in frame buffer */
-unsigned int dPitch, /* Pitch value of destination surface in BYTE */
-unsigned int bpp,    /* Color depth of destination surface */
-unsigned int dx,
-unsigned int dy,     /* Starting coordinate of destination surface */
-unsigned int width,
-unsigned int height, /* width and height of rectangle in pixel value */
-unsigned int rop2);
-
-int sm750_hw_imageblit(struct lynx_accel *accel,
-		 const char *pSrcbuf, /* pointer to start of source buffer in system memory */
-		 u32 srcDelta,          /* Pitch value (in bytes) of the source buffer, +ive means top down and -ive mean button up */
-		 u32 startBit, /* Mono data can start at any bit in a byte, this value should be 0 to 7 */
-		 u32 dBase,    /* Address of destination: offset in frame buffer */
-		 u32 dPitch,   /* Pitch value of destination surface in BYTE */
-		 u32 bytePerPixel,      /* Color depth of destination surface */
-		 u32 dx,
-		 u32 dy,       /* Starting coordinate of destination surface */
-		 u32 width,
-		 u32 height,   /* width and height of rectangle in pixel value */
-		 u32 fColor,   /* Foreground color (corresponding to a 1 in the monochrome data */
-		 u32 bColor,   /* Background color (corresponding to a 0 in the monochrome data */
-		 u32 rop2);
+		      u32 base, u32 pitch, u32 Bpp,
+		      u32 x, u32 y, u32 width, u32 height,
+		      u32 color, u32 rop);
+
+/**
+ * sm750_hm_copyarea
+ * @sBase: Address of source: offset in frame buffer
+ * @sPitch: Pitch value of source surface in BYTE
+ * @sx: Starting x coordinate of source surface
+ * @sy: Starting y coordinate of source surface
+ * @dBase: Address of destination: offset in frame buffer
+ * @dPitch: Pitch value of destination surface in BYTE
+ * @Bpp: Color depth of destination surface
+ * @dx: Starting x coordinate of destination surface
+ * @dy: Starting y coordinate of destination surface
+ * @width: width of rectangle in pixel value
+ * @height: height of rectangle in pixel value
+ * @rop2: ROP value
+ */
+int sm750_hw_copyarea(struct lynx_accel *accel,
+		      unsigned int sBase, unsigned int sPitch,
+		      unsigned int sx, unsigned int sy,
+		      unsigned int dBase, unsigned int dPitch,
+		      unsigned int Bpp, unsigned int dx, unsigned int dy,
+		      unsigned int width, unsigned int height,
+		      unsigned int rop2);
+
+/**
+ * sm750_hw_imageblit
+ * @pSrcbuf: pointer to start of source buffer in system memory
+ * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top down
+ *>-----      and -ive mean button up
+ * @startBit: Mono data can start at any bit in a byte, this value should be
+ *>-----      0 to 7
+ * @dBase: Address of destination: offset in frame buffer
+ * @dPitch: Pitch value of destination surface in BYTE
+ * @bytePerPixel: Color depth of destination surface
+ * @dx: Starting x coordinate of destination surface
+ * @dy: Starting y coordinate of destination surface
+ * @width: width of rectangle in pixel value
+ * @height: height of rectangle in pixel value
+ * @fColor: Foreground color (corresponding to a 1 in the monochrome data
+ * @bColor: Background color (corresponding to a 0 in the monochrome data
+ * @rop2: ROP value
+ */
+int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
+		       u32 srcDelta, u32 startBit, u32 dBase, u32 dPitch,
+		       u32 bytePerPixel, u32 dx, u32 dy, u32 width,
+		       u32 height, u32 fColor, u32 bColor, u32 rop2);
+
 #endif
diff --git a/drivers/staging/sm750fb/sm750_cursor.h b/drivers/staging/sm750fb/sm750_cursor.h
index 16ac07eb58d6..b59643dd61ed 100644
--- a/drivers/staging/sm750fb/sm750_cursor.h
+++ b/drivers/staging/sm750fb/sm750_cursor.h
@@ -5,14 +5,11 @@
 /* hw_cursor_xxx works for voyager,718 and 750 */
 void sm750_hw_cursor_enable(struct lynx_cursor *cursor);
 void sm750_hw_cursor_disable(struct lynx_cursor *cursor);
-void sm750_hw_cursor_setSize(struct lynx_cursor *cursor,
-						int w, int h);
-void sm750_hw_cursor_setPos(struct lynx_cursor *cursor,
-						int x, int y);
-void sm750_hw_cursor_setColor(struct lynx_cursor *cursor,
-						u32 fg, u32 bg);
-void sm750_hw_cursor_setData(struct lynx_cursor *cursor,
-			u16 rop, const u8 *data, const u8 *mask);
-void sm750_hw_cursor_setData2(struct lynx_cursor *cursor,
-			u16 rop, const u8 *data, const u8 *mask);
+void sm750_hw_cursor_setSize(struct lynx_cursor *cursor, int w, int h);
+void sm750_hw_cursor_setPos(struct lynx_cursor *cursor, int x, int y);
+void sm750_hw_cursor_setColor(struct lynx_cursor *cursor, u32 fg, u32 bg);
+void sm750_hw_cursor_setData(struct lynx_cursor *cursor, u16 rop,
+			     const u8 *data, const u8 *mask);
+void sm750_hw_cursor_setData2(struct lynx_cursor *cursor, u16 rop,
+			      const u8 *data, const u8 *mask);
 #endif