staging: speakup: make ttyio synths use device name

This patch introduces new module parameter, dev, which takes a string
representing the device that the external synth is connected to, e.g.
ttyS0, ttyUSB0 etc. This is then used to communicate with the synth.
That way, speakup can support more than ttyS*. As of this patch, it
only supports ttyS*, ttyUSB* and selected synths for lp*. dev parameter
is only available for tty-migrated synths.

Users will either use dev or ser as both serve same purpose. This patch
maintains backward compatility by allowing ser to be specified. When
both are specified, whichever is non-default, i.e. not ttyS0, is used.
If both are non-default then dev is used.

Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

11 files changed, 37 insertions, 8 deletions

diff --git a/drivers/staging/speakup/speakup_acntsa.c b/drivers/staging/speakup/speakup_acntsa.c
index 6e4f873eddbc..0e10404e2e8c 100644
--- a/drivers/staging/speakup/speakup_acntsa.c
+++ b/drivers/staging/speakup/speakup_acntsa.c
@@ -96,6 +96,7 @@ static struct spk_synth synth_acntsa = {
 	.trigger = 50,
 	.jiffies = 30,
 	.full = 40000,
+	.dev_name = SYNTH_DEFAULT_DEV,
 	.startup = SYNTH_START,
 	.checkval = SYNTH_CHECK,
 	.vars = vars,
@@ -135,9 +136,11 @@ static int synth_probe(struct spk_synth *synth)
 }
 
 module_param_named(ser, synth_acntsa.ser, int, 0444);
+module_param_named(dev, synth_acntsa.dev_name, charp, S_IRUGO);
 module_param_named(start, synth_acntsa.startup, short, 0444);
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
+MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
 
 module_spk_synth(synth_acntsa);
diff --git a/drivers/staging/speakup/speakup_apollo.c b/drivers/staging/speakup/speakup_apollo.c
index 7d99fba734b5..2edb56c8a559 100644
--- a/drivers/staging/speakup/speakup_apollo.c
+++ b/drivers/staging/speakup/speakup_apollo.c
@@ -105,6 +105,7 @@ static struct spk_synth synth_apollo = {
 	.trigger = 50,
 	.jiffies = 50,
 	.full = 40000,
+	.dev_name = SYNTH_DEFAULT_DEV,
 	.startup = SYNTH_START,
 	.checkval = SYNTH_CHECK,
 	.vars = vars,
@@ -199,9 +200,11 @@ static void do_catch_up(struct spk_synth *synth)
 }
 
 module_param_named(ser, synth_apollo.ser, int, 0444);
+module_param_named(dev, synth_apollo.dev_name, charp, S_IRUGO);
 module_param_named(start, synth_apollo.startup, short, 0444);
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
+MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
 
 module_spk_synth(synth_apollo);
diff --git a/drivers/staging/speakup/speakup_audptr.c b/drivers/staging/speakup/speakup_audptr.c
index 1ca476087ba3..8ae826eba71c 100644
--- a/drivers/staging/speakup/speakup_audptr.c
+++ b/drivers/staging/speakup/speakup_audptr.c
@@ -100,6 +100,7 @@ static struct spk_synth synth_audptr = {
 	.trigger = 50,
 	.jiffies = 30,
 	.full = 18000,
+	.dev_name = SYNTH_DEFAULT_DEV,
 	.startup = SYNTH_START,
 	.checkval = SYNTH_CHECK,
 	.vars = vars,
@@ -162,9 +163,11 @@ static int synth_probe(struct spk_synth *synth)
 }
 
 module_param_named(ser, synth_audptr.ser, int, 0444);
+module_param_named(dev, synth_audptr.dev_name, charp, S_IRUGO);
 module_param_named(start, synth_audptr.startup, short, 0444);
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
+MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
 
 module_spk_synth(synth_audptr);
diff --git a/drivers/staging/speakup/speakup_bns.c b/drivers/staging/speakup/speakup_bns.c
index 474c12770ff6..60bcf0df8123 100644
--- a/drivers/staging/speakup/speakup_bns.c
+++ b/drivers/staging/speakup/speakup_bns.c
@@ -93,6 +93,7 @@ static struct spk_synth synth_bns = {
 	.trigger = 50,
 	.jiffies = 50,
 	.full = 40000,
+	.dev_name = SYNTH_DEFAULT_DEV,
 	.startup = SYNTH_START,
 	.checkval = SYNTH_CHECK,
 	.vars = vars,
@@ -119,9 +120,11 @@ static struct spk_synth synth_bns = {
 };
 
 module_param_named(ser, synth_bns.ser, int, 0444);
+module_param_named(dev, synth_bns.dev_name, charp, S_IRUGO);
 module_param_named(start, synth_bns.startup, short, 0444);
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
+MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
 
 module_spk_synth(synth_bns);
diff --git a/drivers/staging/speakup/speakup_decext.c b/drivers/staging/speakup/speakup_decext.c
index bf44ac988bf8..95f4b2116d0c 100644
--- a/drivers/staging/speakup/speakup_decext.c
+++ b/drivers/staging/speakup/speakup_decext.c
@@ -120,6 +120,7 @@ static struct spk_synth synth_decext = {
 	.jiffies = 50,
 	.full = 40000,
 	.flags = SF_DEC,
+	.dev_name = SYNTH_DEFAULT_DEV,
 	.startup = SYNTH_START,
 	.checkval = SYNTH_CHECK,
 	.vars = vars,
@@ -226,9 +227,11 @@ static void synth_flush(struct spk_synth *synth)
 }
 
 module_param_named(ser, synth_decext.ser, int, 0444);
+module_param_named(dev, synth_decext.dev_name, charp, S_IRUGO);
 module_param_named(start, synth_decext.startup, short, 0444);
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
+MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
 
 module_spk_synth(synth_decext);
diff --git a/drivers/staging/speakup/speakup_dectlk.c b/drivers/staging/speakup/speakup_dectlk.c
index ccb3bdf58e2a..f06995480022 100644
--- a/drivers/staging/speakup/speakup_dectlk.c
+++ b/drivers/staging/speakup/speakup_dectlk.c
@@ -124,6 +124,7 @@ static struct spk_synth synth_dectlk = {
 	.trigger = 50,
 	.jiffies = 50,
 	.full = 40000,
+	.dev_name = SYNTH_DEFAULT_DEV,
 	.startup = SYNTH_START,
 	.checkval = SYNTH_CHECK,
 	.vars = vars,
@@ -298,9 +299,11 @@ static void synth_flush(struct spk_synth *synth)
 }
 
 module_param_named(ser, synth_dectlk.ser, int, 0444);
+module_param_named(dev, synth_dectlk.dev_name, charp, S_IRUGO);
 module_param_named(start, synth_dectlk.startup, short, 0444);
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
+MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
 
 module_spk_synth(synth_dectlk);
diff --git a/drivers/staging/speakup/speakup_dummy.c b/drivers/staging/speakup/speakup_dummy.c
index 3fdc768c8454..851953d5eefb 100644
--- a/drivers/staging/speakup/speakup_dummy.c
+++ b/drivers/staging/speakup/speakup_dummy.c
@@ -95,6 +95,7 @@ static struct spk_synth synth_dummy = {
 	.trigger = 50,
 	.jiffies = 50,
 	.full = 40000,
+	.dev_name = SYNTH_DEFAULT_DEV,
 	.startup = SYNTH_START,
 	.checkval = SYNTH_CHECK,
 	.vars = vars,
@@ -121,9 +122,11 @@ static struct spk_synth synth_dummy = {
 };
 
 module_param_named(ser, synth_dummy.ser, int, 0444);
+module_param_named(dev, synth_dummy.dev_name, charp, S_IRUGO);
 module_param_named(start, synth_dummy.startup, short, 0444);
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
+MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
 
 module_spk_synth(synth_dummy);
diff --git a/drivers/staging/speakup/speakup_ltlk.c b/drivers/staging/speakup/speakup_ltlk.c
index 9606224bc4d6..423795f88f53 100644
--- a/drivers/staging/speakup/speakup_ltlk.c
+++ b/drivers/staging/speakup/speakup_ltlk.c
@@ -107,6 +107,7 @@ static struct spk_synth synth_ltlk = {
 	.trigger = 50,
 	.jiffies = 50,
 	.full = 40000,
+	.dev_name = SYNTH_DEFAULT_DEV,
 	.startup = SYNTH_START,
 	.checkval = SYNTH_CHECK,
 	.vars = vars,
@@ -166,9 +167,11 @@ static int synth_probe(struct spk_synth *synth)
 }
 
 module_param_named(ser, synth_ltlk.ser, int, 0444);
+module_param_named(dev, synth_ltlk.dev_name, charp, S_IRUGO);
 module_param_named(start, synth_ltlk.startup, short, 0444);
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
+MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
 
 module_spk_synth(synth_ltlk);
diff --git a/drivers/staging/speakup/speakup_spkout.c b/drivers/staging/speakup/speakup_spkout.c
index 086d5349d8d8..9ca21edc42ce 100644
--- a/drivers/staging/speakup/speakup_spkout.c
+++ b/drivers/staging/speakup/speakup_spkout.c
@@ -98,6 +98,7 @@ static struct spk_synth synth_spkout = {
 	.trigger = 50,
 	.jiffies = 50,
 	.full = 40000,
+	.dev_name = SYNTH_DEFAULT_DEV,
 	.startup = SYNTH_START,
 	.checkval = SYNTH_CHECK,
 	.vars = vars,
@@ -130,9 +131,11 @@ static void synth_flush(struct spk_synth *synth)
 }
 
 module_param_named(ser, synth_spkout.ser, int, 0444);
+module_param_named(dev, synth_spkout.dev_name, charp, S_IRUGO);
 module_param_named(start, synth_spkout.startup, short, 0444);
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
+MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
 
 module_spk_synth(synth_spkout);
diff --git a/drivers/staging/speakup/speakup_txprt.c b/drivers/staging/speakup/speakup_txprt.c
index e4c1b5424f94..831ee404e7a1 100644
--- a/drivers/staging/speakup/speakup_txprt.c
+++ b/drivers/staging/speakup/speakup_txprt.c
@@ -92,6 +92,7 @@ static struct spk_synth synth_txprt = {
 	.trigger = 50,
 	.jiffies = 50,
 	.full = 40000,
+	.dev_name = SYNTH_DEFAULT_DEV,
 	.startup = SYNTH_START,
 	.checkval = SYNTH_CHECK,
 	.vars = vars,
@@ -118,9 +119,11 @@ static struct spk_synth synth_txprt = {
 };
 
 module_param_named(ser, synth_txprt.ser, int, 0444);
+module_param_named(dev, synth_txprt.dev_name, charp, S_IRUGO);
 module_param_named(start, synth_txprt.startup, short, 0444);
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
+MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
 
 module_spk_synth(synth_txprt);
diff --git a/drivers/staging/speakup/spk_ttyio.c b/drivers/staging/speakup/spk_ttyio.c
index 0a5436706e74..442f191a017e 100644
--- a/drivers/staging/speakup/spk_ttyio.c
+++ b/drivers/staging/speakup/spk_ttyio.c
@@ -147,11 +147,12 @@ static inline void get_termios(struct tty_struct *tty, struct ktermios *out_term
 	up_read(&tty->termios_rwsem);
 }
 
-static int spk_ttyio_initialise_ldisc(int ser)
+static int spk_ttyio_initialise_ldisc(struct spk_synth *synth)
 {
 	int ret = 0;
 	struct tty_struct *tty;
 	struct ktermios tmp_termios;
+	dev_t dev;
 
 	ret = tty_register_ldisc(N_SPEAKUP, &spk_ttyio_ldisc_ops);
 	if (ret) {
@@ -159,13 +160,11 @@ static int spk_ttyio_initialise_ldisc(int ser)
 		return ret;
 	}
 
-	if (ser < 0 || ser > (255 - 64)) {
-		pr_err("speakup: Invalid ser param. Must be between 0 and 191 inclusive.\n");
-		return -EINVAL;
-	}
+	ret = get_dev_to_use(synth, &dev);
+	if (ret)
+		return ret;
 
-	/* TODO: support more than ttyS* */
-	tty = tty_open_by_driver(MKDEV(4, (ser +  64)), NULL, NULL);
+	tty = tty_open_by_driver(dev, NULL, NULL);
 	if (IS_ERR(tty))
 		return PTR_ERR(tty);
 
@@ -277,7 +276,7 @@ static void spk_ttyio_flush_buffer(void)
 
 int spk_ttyio_synth_probe(struct spk_synth *synth)
 {
-	int rv = spk_ttyio_initialise_ldisc(synth->ser);
+	int rv = spk_ttyio_initialise_ldisc(synth);
 
 	if (rv)
 		return rv;