staging: vc04_services: Use tabs instead of spaces

This patch fixes the checkpatch.pl error:

WARNING: please, no spaces at the start of a line

in the interface/vchi directory.

Signed-off-by: Alejandro Ismael Silva <silva.alejandro.ismael@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 73 insertions, 73 deletions

diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
index 0b6fc0d31f4c..df7f8ef478af 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
@@ -67,8 +67,8 @@ struct opaque_vchi_service_t;
 // Descriptor for a held message. Allocated by client, initialised by vchi_msg_hold,
 // vchi_msg_iter_hold or vchi_msg_iter_hold_next. Fields are for internal VCHI use only.
 struct vchi_held_msg {
-   struct opaque_vchi_service_t *service;
-   void *message;
+	struct opaque_vchi_service_t *service;
+	void *message;
 };
 
 // structure used to provide the information needed to open a server or a client
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi_common.h b/drivers/staging/vc04_services/interface/vchi/vchi_common.h
index 35f331f80812..1672848d5c83 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi_common.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi_common.h
@@ -36,89 +36,89 @@
 
 //flags used when sending messages (must be bitmapped)
 typedef enum {
-   VCHI_FLAGS_NONE                      = 0x0,
-   VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE   = 0x1,   // waits for message to be received, or sent (NB. not the same as being seen on other side)
-   VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE = 0x2,   // run a callback when message sent
-   VCHI_FLAGS_BLOCK_UNTIL_QUEUED        = 0x4,   // return once the transfer is in a queue ready to go
-   VCHI_FLAGS_ALLOW_PARTIAL             = 0x8,
-   VCHI_FLAGS_BLOCK_UNTIL_DATA_READ     = 0x10,
-   VCHI_FLAGS_CALLBACK_WHEN_DATA_READ   = 0x20,
-
-   VCHI_FLAGS_ALIGN_SLOT            = 0x000080,  // internal use only
-   VCHI_FLAGS_BULK_AUX_QUEUED       = 0x010000,  // internal use only
-   VCHI_FLAGS_BULK_AUX_COMPLETE     = 0x020000,  // internal use only
-   VCHI_FLAGS_BULK_DATA_QUEUED      = 0x040000,  // internal use only
-   VCHI_FLAGS_BULK_DATA_COMPLETE    = 0x080000,  // internal use only
-   VCHI_FLAGS_INTERNAL              = 0xFF0000
+	VCHI_FLAGS_NONE                      = 0x0,
+	VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE   = 0x1,   // waits for message to be received, or sent (NB. not the same as being seen on other side)
+	VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE = 0x2,   // run a callback when message sent
+	VCHI_FLAGS_BLOCK_UNTIL_QUEUED        = 0x4,   // return once the transfer is in a queue ready to go
+	VCHI_FLAGS_ALLOW_PARTIAL             = 0x8,
+	VCHI_FLAGS_BLOCK_UNTIL_DATA_READ     = 0x10,
+	VCHI_FLAGS_CALLBACK_WHEN_DATA_READ   = 0x20,
+
+	VCHI_FLAGS_ALIGN_SLOT            = 0x000080,  // internal use only
+	VCHI_FLAGS_BULK_AUX_QUEUED       = 0x010000,  // internal use only
+	VCHI_FLAGS_BULK_AUX_COMPLETE     = 0x020000,  // internal use only
+	VCHI_FLAGS_BULK_DATA_QUEUED      = 0x040000,  // internal use only
+	VCHI_FLAGS_BULK_DATA_COMPLETE    = 0x080000,  // internal use only
+	VCHI_FLAGS_INTERNAL              = 0xFF0000
 } VCHI_FLAGS_T;
 
 // constants for vchi_crc_control()
 typedef enum {
-   VCHI_CRC_NOTHING = -1,
-   VCHI_CRC_PER_SERVICE = 0,
-   VCHI_CRC_EVERYTHING = 1,
+	VCHI_CRC_NOTHING = -1,
+	VCHI_CRC_PER_SERVICE = 0,
+	VCHI_CRC_EVERYTHING = 1,
 } VCHI_CRC_CONTROL_T;
 
 //callback reasons when an event occurs on a service
 typedef enum {
-   VCHI_CALLBACK_REASON_MIN,
-
-   //This indicates that there is data available
-   //handle is the msg id that was transmitted with the data
-   //    When a message is received and there was no FULL message available previously, send callback
-   //    Tasks get kicked by the callback, reset their event and try and read from the fifo until it fails
-   VCHI_CALLBACK_MSG_AVAILABLE,
-   VCHI_CALLBACK_MSG_SENT,
-   VCHI_CALLBACK_MSG_SPACE_AVAILABLE, // XXX not yet implemented
-
-   // This indicates that a transfer from the other side has completed
-   VCHI_CALLBACK_BULK_RECEIVED,
-   //This indicates that data queued up to be sent has now gone
-   //handle is the msg id that was used when sending the data
-   VCHI_CALLBACK_BULK_SENT,
-   VCHI_CALLBACK_BULK_RX_SPACE_AVAILABLE, // XXX not yet implemented
-   VCHI_CALLBACK_BULK_TX_SPACE_AVAILABLE, // XXX not yet implemented
-
-   VCHI_CALLBACK_SERVICE_CLOSED,
-
-   // this side has sent XOFF to peer due to lack of data consumption by service
-   // (suggests the service may need to take some recovery action if it has
-   // been deliberately holding off consuming data)
-   VCHI_CALLBACK_SENT_XOFF,
-   VCHI_CALLBACK_SENT_XON,
-
-   // indicates that a bulk transfer has finished reading the source buffer
-   VCHI_CALLBACK_BULK_DATA_READ,
-
-   // power notification events (currently host side only)
-   VCHI_CALLBACK_PEER_OFF,
-   VCHI_CALLBACK_PEER_SUSPENDED,
-   VCHI_CALLBACK_PEER_ON,
-   VCHI_CALLBACK_PEER_RESUMED,
-   VCHI_CALLBACK_FORCED_POWER_OFF,
-
-   // some extra notifications provided by vchiq_arm
-   VCHI_CALLBACK_SERVICE_OPENED,
-   VCHI_CALLBACK_BULK_RECEIVE_ABORTED,
-   VCHI_CALLBACK_BULK_TRANSMIT_ABORTED,
-
-   VCHI_CALLBACK_REASON_MAX
+	VCHI_CALLBACK_REASON_MIN,
+
+	//This indicates that there is data available
+	//handle is the msg id that was transmitted with the data
+	//    When a message is received and there was no FULL message available previously, send callback
+	//    Tasks get kicked by the callback, reset their event and try and read from the fifo until it fails
+	VCHI_CALLBACK_MSG_AVAILABLE,
+	VCHI_CALLBACK_MSG_SENT,
+	VCHI_CALLBACK_MSG_SPACE_AVAILABLE, // XXX not yet implemented
+
+	// This indicates that a transfer from the other side has completed
+	VCHI_CALLBACK_BULK_RECEIVED,
+	//This indicates that data queued up to be sent has now gone
+	//handle is the msg id that was used when sending the data
+	VCHI_CALLBACK_BULK_SENT,
+	VCHI_CALLBACK_BULK_RX_SPACE_AVAILABLE, // XXX not yet implemented
+	VCHI_CALLBACK_BULK_TX_SPACE_AVAILABLE, // XXX not yet implemented
+
+	VCHI_CALLBACK_SERVICE_CLOSED,
+
+	// this side has sent XOFF to peer due to lack of data consumption by service
+	// (suggests the service may need to take some recovery action if it has
+	// been deliberately holding off consuming data)
+	VCHI_CALLBACK_SENT_XOFF,
+	VCHI_CALLBACK_SENT_XON,
+
+	// indicates that a bulk transfer has finished reading the source buffer
+	VCHI_CALLBACK_BULK_DATA_READ,
+
+	// power notification events (currently host side only)
+	VCHI_CALLBACK_PEER_OFF,
+	VCHI_CALLBACK_PEER_SUSPENDED,
+	VCHI_CALLBACK_PEER_ON,
+	VCHI_CALLBACK_PEER_RESUMED,
+	VCHI_CALLBACK_FORCED_POWER_OFF,
+
+	// some extra notifications provided by vchiq_arm
+	VCHI_CALLBACK_SERVICE_OPENED,
+	VCHI_CALLBACK_BULK_RECEIVE_ABORTED,
+	VCHI_CALLBACK_BULK_TRANSMIT_ABORTED,
+
+	VCHI_CALLBACK_REASON_MAX
 } VCHI_CALLBACK_REASON_T;
 
 // service control options
 typedef enum {
-   VCHI_SERVICE_OPTION_MIN,
+	VCHI_SERVICE_OPTION_MIN,
 
-   VCHI_SERVICE_OPTION_TRACE,
-   VCHI_SERVICE_OPTION_SYNCHRONOUS,
+	VCHI_SERVICE_OPTION_TRACE,
+	VCHI_SERVICE_OPTION_SYNCHRONOUS,
 
-   VCHI_SERVICE_OPTION_MAX
+	VCHI_SERVICE_OPTION_MAX
 } VCHI_SERVICE_OPTION_T;
 
 //Callback used by all services / bulk transfers
 typedef void (*VCHI_CALLBACK_T)(void *callback_param, //my service local param
-				 VCHI_CALLBACK_REASON_T reason,
-				 void *handle); //for transmitting msg's only
+				VCHI_CALLBACK_REASON_T reason,
+				void *handle); //for transmitting msg's only
 
 /*
  * Define vector struct for scatter-gather (vector) operations
@@ -138,8 +138,8 @@ typedef void (*VCHI_CALLBACK_T)(void *callback_param, //my service local param
  *
  */
 struct vchi_msg_vector {
-   const void *vec_base;
-   int32_t vec_len;
+	const void *vec_base;
+	int32_t vec_len;
 };
 
 // Opaque type for a connection API
@@ -155,10 +155,10 @@ typedef struct opaque_vchi_message_driver_t VCHI_MESSAGE_DRIVER_T;
 // is used again after messages for that service are removed/dequeued by any
 // means other than vchi_msg_iter_... calls on the iterator itself.
 struct vchi_msg_iter {
-   struct opaque_vchi_service_t *service;
-   void *last;
-   void *next;
-   void *remove;
+	struct opaque_vchi_service_t *service;
+	void *last;
+	void *next;
+	void *remove;
 };
 
 #endif // VCHI_COMMON_H_