diff options
author | James Morris <james.l.morris@oracle.com> | 2015-11-23 22:46:28 +1100 |
---|---|---|
committer | James Morris <james.l.morris@oracle.com> | 2015-11-23 22:46:28 +1100 |
commit | ebd68df3f24b318d391d15c458d6f43f340ba36a (patch) | |
tree | f0277bc4b853abe5db1d30fa4e10b05bba7f2ac5 /drivers/staging/wilc1000/wilc_wlan_if.h | |
parent | security/capability.h: cap_issubset/isclear can be boolean (diff) | |
parent | Linux 4.4-rc2 (diff) | |
download | linux-dev-ebd68df3f24b318d391d15c458d6f43f340ba36a.tar.xz linux-dev-ebd68df3f24b318d391d15c458d6f43f340ba36a.zip |
Sync to Linus v4.4-rc2 for LSM developers.
Diffstat (limited to 'drivers/staging/wilc1000/wilc_wlan_if.h')
-rw-r--r-- | drivers/staging/wilc1000/wilc_wlan_if.h | 1455 |
1 files changed, 716 insertions, 739 deletions
diff --git a/drivers/staging/wilc1000/wilc_wlan_if.h b/drivers/staging/wilc1000/wilc_wlan_if.h index 5cf74e4c4a70..be972afe6e62 100644 --- a/drivers/staging/wilc1000/wilc_wlan_if.h +++ b/drivers/staging/wilc1000/wilc_wlan_if.h @@ -1,4 +1,4 @@ -/* ////////////////////////////////////////////////////////////////////////// */ +/* ///////////////////////////////////////////////////////////////////////// */ /* */ /* Copyright (c) Atmel Corporation. All rights reserved. */ /* */ @@ -7,34 +7,23 @@ /* */ /* ///////////////////////////////////////////////////////////////////////// */ - #ifndef WILC_WLAN_IF_H #define WILC_WLAN_IF_H -/*bug 3887: [AP] Allow Management frames to be passed to the host*/ -#define WILC_AP_EXTERNAL_MLME -#define WILC_P2P -#define TCP_ENHANCEMENTS -/* #define MEMORY_STATIC */ -/* #define WILC_FULLY_HOSTING_AP */ -/* #define USE_OLD_SPI_SW */ - - -#include "wilc_oswrapper.h" +#include <linux/semaphore.h> #include "linux_wlan_common.h" - /******************************************** * * Debug Flags * ********************************************/ -#define N_INIT 0x00000001 -#define N_ERR 0x00000002 -#define N_TXQ 0x00000004 -#define N_INTR 0x00000008 -#define N_RXQ 0x00000010 +#define N_INIT 0x00000001 +#define N_ERR 0x00000002 +#define N_TXQ 0x00000004 +#define N_INTR 0x00000008 +#define N_RXQ 0x00000010 /******************************************** * @@ -42,10 +31,9 @@ * ********************************************/ -#define HIF_SDIO (0) -#define HIF_SPI BIT(0) -#define HIF_SDIO_GPIO_IRQ BIT(2) - +#define HIF_SDIO (0) +#define HIF_SPI BIT(0) +#define HIF_SDIO_GPIO_IRQ BIT(2) /******************************************** * @@ -53,8 +41,8 @@ * ********************************************/ -#define CE_TX_BUFFER_SIZE (64 * 1024) -#define CE_RX_BUFFER_SIZE (384 * 1024) +#define CE_TX_BUFFER_SIZE (64 * 1024) +#define CE_RX_BUFFER_SIZE (384 * 1024) /******************************************** * @@ -63,47 +51,27 @@ ********************************************/ typedef struct { - uint32_t read_write: 1; - uint32_t function: 3; - uint32_t raw: 1; - uint32_t address: 17; - uint32_t data: 8; + u32 read_write: 1; + u32 function: 3; + u32 raw: 1; + u32 address: 17; + u32 data: 8; } sdio_cmd52_t; typedef struct { /* struct { */ - uint32_t read_write: 1; - uint32_t function: 3; - uint32_t block_mode: 1; - uint32_t increment: 1; - uint32_t address: 17; - uint32_t count: 9; + u32 read_write: 1; + u32 function: 3; + u32 block_mode: 1; + u32 increment: 1; + u32 address: 17; + u32 count: 9; /* } bit; */ - uint8_t *buffer; - uint32_t block_size; + u8 *buffer; + u32 block_size; } sdio_cmd53_t; typedef struct { - void (*os_sleep)(uint32_t); - void (*os_atomic_sleep)(uint32_t); - void (*os_debug)(uint8_t *); - void *(*os_malloc)(uint32_t); - void *(*os_malloc_atomic)(uint32_t); - void (*os_free)(void *); - void (*os_lock)(void *); - void (*os_unlock)(void *); - int (*os_wait)(void *, u32); - void (*os_signal)(void *); - void (*os_enter_cs)(void *); - void (*os_leave_cs)(void *); - - /*Added by Amr - BugID_4720*/ - void (*os_spin_lock)(void *, unsigned long *); - void (*os_spin_unlock)(void *, unsigned long *); - -} wilc_wlan_os_func_t; - -typedef struct { int io_type; int (*io_init)(void *); void (*io_deinit)(void *); @@ -116,96 +84,39 @@ typedef struct { } sdio; struct { int (*spi_max_speed)(void); - int (*spi_tx)(uint8_t *, uint32_t); - int (*spi_rx)(uint8_t *, uint32_t); - int (*spi_trx)(uint8_t *, uint8_t *, uint32_t); + int (*spi_tx)(u8 *, u32); + int (*spi_rx)(u8 *, u32); + int (*spi_trx)(u8 *, u8 *, u32); } spi; } u; } wilc_wlan_io_func_t; -typedef struct { - void (*rx_indicate)(uint8_t *, uint32_t, uint32_t); - void (*rx_complete)(void); -} wilc_wlan_net_func_t; - -typedef struct { - void (*mac_indicate)(int); -} wilc_wlan_indicate_func_t; -#define WILC_MAC_INDICATE_STATUS 0x1 -#define WILC_MAC_STATUS_INIT -1 -#define WILC_MAC_STATUS_READY 0 -#define WILC_MAC_STATUS_CONNECT 1 +#define WILC_MAC_INDICATE_STATUS 0x1 +#define WILC_MAC_STATUS_INIT -1 +#define WILC_MAC_STATUS_READY 0 +#define WILC_MAC_STATUS_CONNECT 1 #define WILC_MAC_INDICATE_SCAN 0x2 typedef struct { void *os_private; - - void *hif_critical_section; - - uint32_t tx_buffer_size; - void *txq_critical_section; - - /*Added by Amr - BugID_4720*/ - void *txq_add_to_head_critical_section; - void *txq_spin_lock; - - void *txq_wait_event; - -#if defined(MEMORY_STATIC) - uint32_t rx_buffer_size; -#endif - void *rxq_critical_section; - void *rxq_wait_event; - - void *cfg_wait_event; } wilc_wlan_os_context_t; typedef struct { wilc_wlan_os_context_t os_context; - wilc_wlan_os_func_t os_func; wilc_wlan_io_func_t io_func; - wilc_wlan_net_func_t net_func; - wilc_wlan_indicate_func_t indicate_func; } wilc_wlan_inp_t; struct tx_complete_data { - #ifdef WILC_FULLY_HOSTING_AP - struct tx_complete_data *next; - #endif int size; void *buff; - uint8_t *pBssid; + u8 *pBssid; struct sk_buff *skb; }; - typedef void (*wilc_tx_complete_func_t)(void *, int); -#define WILC_TX_ERR_NO_BUF (-2) - -typedef struct { - int (*wlan_firmware_download)(const uint8_t *, uint32_t); - int (*wlan_start)(void); - int (*wlan_stop)(void); - int (*wlan_add_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t); - int (*wlan_handle_tx_que)(uint32_t *); - void (*wlan_handle_rx_que)(void); - void (*wlan_handle_rx_isr)(void); - void (*wlan_cleanup)(void); - int (*wlan_cfg_set)(int, uint32_t, uint8_t *, uint32_t, int, uint32_t); - int (*wlan_cfg_get)(int, uint32_t, int, uint32_t); - int (*wlan_cfg_get_value)(uint32_t, uint8_t *, uint32_t); - /*Bug3959: transmitting mgmt frames received from host*/ - #if defined(WILC_AP_EXTERNAL_MLME) || defined(WILC_P2P) - int (*wlan_add_mgmt_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t); - - #ifdef WILC_FULLY_HOSTING_AP - int (*wlan_add_data_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t); - #endif - - #endif -} wilc_wlan_oup_t; +#define WILC_TX_ERR_NO_BUF (-2) /******************************************** * @@ -216,156 +127,152 @@ typedef struct { #define MAX_SSID_LEN 33 #define MAX_RATES_SUPPORTED 12 -#define INFINITE_SLEEP_TIME ((u32)0xFFFFFFFF) +#define INFINITE_SLEEP_TIME ((u32)0xFFFFFFFF) -#ifdef WILC_PARSE_SCAN_IN_HOST typedef enum { - SUPP_RATES_IE = 1, - EXT_SUPP_RATES_IE = 50, - HT_CAPABILITY_IE = 45, - RSN_IE = 48, - WPA_IE = 221, - WMM_IE = 221, - #ifdef WILC_P2P - P2P_IE = 221, - #endif + SUPP_RATES_IE = 1, + EXT_SUPP_RATES_IE = 50, + HT_CAPABILITY_IE = 45, + RSN_IE = 48, + WPA_IE = 221, + WMM_IE = 221, + P2P_IE = 221, } BEACON_IE; -#endif + typedef enum { - INFRASTRUCTURE = 0, + INFRASTRUCTURE = 0, INDEPENDENT, AP, } BSSTYPE_T; typedef enum { - RATE_AUTO = 0, - RATE_1MB = 1, - RATE_2MB = 2, - RATE_5MB = 5, - RATE_6MB = 6, - RATE_9MB = 9, - RATE_11MB = 11, - RATE_12MB = 12, - RATE_18MB = 18, - RATE_24MB = 24, - RATE_26MB = 36, - RATE_48MB = 48, - RATE_54MB = 54 + RATE_AUTO = 0, + RATE_1MB = 1, + RATE_2MB = 2, + RATE_5MB = 5, + RATE_6MB = 6, + RATE_9MB = 9, + RATE_11MB = 11, + RATE_12MB = 12, + RATE_18MB = 18, + RATE_24MB = 24, + RATE_26MB = 36, + RATE_48MB = 48, + RATE_54MB = 54 } TX_RATE_T; typedef enum { - B_ONLY_MODE = 0, /* basic rate: 1, 2 Mbps, otherwise: 5, 11 Mbps */ - G_ONLY_MODE, /* basic rate: 6, 12, 24 Mbps, otherwise: 9, 18, 36, 48, 54 Mbps */ - G_MIXED_11B_1_MODE, /* basic rate: 1, 2, 5.5, 11 Mbps, otherwise: all on */ - G_MIXED_11B_2_MODE, /* basic rate: 1, 2, 5, 11, 6, 12, 24 Mbps, otherwise: all on */ + B_ONLY_MODE = 0, /* 1, 2 M, otherwise 5, 11 M */ + G_ONLY_MODE, /* 6,12,24 otherwise 9,18,36,48,54 */ + G_MIXED_11B_1_MODE, /* 1,2,5.5,11 otherwise all on */ + G_MIXED_11B_2_MODE, /* 1,2,5,11,6,12,24 otherwise all on */ } G_OPERATING_MODE_T; typedef enum { - G_SHORT_PREAMBLE = 0, /* Short Preamble */ - G_LONG_PREAMBLE = 1, /* Long Preamble */ - G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */ + G_SHORT_PREAMBLE = 0, /* Short Preamble */ + G_LONG_PREAMBLE = 1, /* Long Preamble */ + G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */ } G_PREAMBLE_T; -#define MAC_CONNECTED 1 -#define MAC_DISCONNECTED 0 +#define MAC_CONNECTED 1 +#define MAC_DISCONNECTED 0 -/*bug3819: */ #define SCAN_DONE TRUE typedef enum { - PASSIVE_SCAN = 0, - ACTIVE_SCAN = 1, + PASSIVE_SCAN = 0, + ACTIVE_SCAN = 1, } SCANTYPE_T; typedef enum { - NO_POWERSAVE = 0, - MIN_FAST_PS = 1, - MAX_FAST_PS = 2, - MIN_PSPOLL_PS = 3, - MAX_PSPOLL_PS = 4 + NO_POWERSAVE = 0, + MIN_FAST_PS = 1, + MAX_FAST_PS = 2, + MIN_PSPOLL_PS = 3, + MAX_PSPOLL_PS = 4 } USER_PS_MODE_T; typedef enum { - CHIP_WAKEDUP = 0, + CHIP_WAKEDUP = 0, CHIP_SLEEPING_AUTO = 1, - CHIP_SLEEPING_MANUAL = 2 + CHIP_SLEEPING_MANUAL = 2 } CHIP_PS_STATE_T; typedef enum { - ACQUIRE_ONLY = 0, + ACQUIRE_ONLY = 0, ACQUIRE_AND_WAKEUP = 1, } BUS_ACQUIRE_T; typedef enum { - RELEASE_ONLY = 0, - RELEASE_ALLOW_SLEEP = 1, + RELEASE_ONLY = 0, + RELEASE_ALLOW_SLEEP = 1, } BUS_RELEASE_T; typedef enum { - NO_SECURITY = 0, - WEP_40 = 0x3, - WEP_104 = 0x7, - WPA_AES = 0x29, - WPA_TKIP = 0x49, - WPA_AES_TKIP = 0x69, /* Aes or Tkip */ - WPA2_AES = 0x31, - WPA2_TKIP = 0x51, - WPA2_AES_TKIP = 0x71, /* Aes or Tkip */ + NO_SECURITY = 0, + WEP_40 = 0x3, + WEP_104 = 0x7, + WPA_AES = 0x29, + WPA_TKIP = 0x49, + WPA_AES_TKIP = 0x69, /* Aes or Tkip */ + WPA2_AES = 0x31, + WPA2_TKIP = 0x51, + WPA2_AES_TKIP = 0x71, /* Aes or Tkip */ } SECURITY_T; -typedef enum { - OPEN_SYSTEM = 1, - SHARED_KEY = 2, - ANY = 3, - IEEE8021 = 5 -} AUTHTYPE_T; +enum AUTHTYPE { + OPEN_SYSTEM = 1, + SHARED_KEY = 2, + ANY = 3, + IEEE8021 = 5 +}; -typedef enum { - SITE_SURVEY_1CH = 0, - SITE_SURVEY_ALL_CH = 1, - SITE_SURVEY_OFF = 2 -} SITE_SURVEY_T; +enum SITESURVEY { + SITE_SURVEY_1CH = 0, + SITE_SURVEY_ALL_CH = 1, + SITE_SURVEY_OFF = 2 +}; typedef enum { - NORMAL_ACK = 0, + NORMAL_ACK = 0, NO_ACK, } ACK_POLICY_T; typedef enum { - DONT_RESET = 0, - DO_RESET = 1, - NO_REQUEST = 2, + DONT_RESET = 0, + DO_RESET = 1, + NO_REQUEST = 2, } RESET_REQ_T; typedef enum { - REKEY_DISABLE = 1, + REKEY_DISABLE = 1, REKEY_TIME_BASE, REKEY_PKT_BASE, REKEY_TIME_PKT_BASE } RSNA_REKEY_POLICY_T; typedef enum { - FILTER_NO = 0x00, - FILTER_AP_ONLY = 0x01, - FILTER_STA_ONLY = 0x02 + FILTER_NO = 0x00, + FILTER_AP_ONLY = 0x01, + FILTER_STA_ONLY = 0x02 } SCAN_CLASS_FITLER_T; typedef enum { - PRI_HIGH_RSSI = 0x00, - PRI_LOW_RSSI = 0x04, - PRI_DETECT = 0x08 + PRI_HIGH_RSSI = 0x00, + PRI_LOW_RSSI = 0x04, + PRI_DETECT = 0x08 } SCAN_PRI_T; typedef enum { - CH_FILTER_OFF = 0x00, - CH_FILTER_ON = 0x10 + CH_FILTER_OFF = 0x00, + CH_FILTER_ON = 0x10 } CH_FILTER_T; typedef enum { - AUTO_PROT = 0, /* Auto */ - NO_PROT, /* Do not use any protection */ - ERP_PROT, /* Protect all ERP frame exchanges */ - HT_PROT, /* Protect all HT frame exchanges */ - GF_PROT, /* Protect all GF frame exchanges */ + AUTO_PROT = 0, /* Auto */ + NO_PROT, /* Do not use any protection */ + ERP_PROT, /* Protect all ERP frame exchanges */ + HT_PROT, /* Protect all HT frame exchanges */ + GF_PROT, /* Protect all GF frame exchanges */ } N_PROTECTION_MODE_T; typedef enum { @@ -374,29 +281,29 @@ typedef enum { } G_PROTECTION_MODE_T; typedef enum { - HT_MIXED_MODE = 1, + HT_MIXED_MODE = 1, HT_ONLY_20MHZ_MODE, HT_ONLY_20_40MHZ_MODE, } N_OPERATING_MODE_T; typedef enum { - NO_DETECT = 0, - DETECT_ONLY = 1, - DETECT_PROTECT = 2, - DETECT_PROTECT_REPORT = 3, + NO_DETECT = 0, + DETECT_ONLY = 1, + DETECT_PROTECT = 2, + DETECT_PROTECT_REPORT = 3, } N_OBSS_DETECTION_T; typedef enum { - RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */ - FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */ - LSIG_TXOP_PROT, /* LSIG TXOP Protection */ - FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */ + RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */ + FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */ + LSIG_TXOP_PROT, /* LSIG TXOP Protection */ + FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */ } N_PROTECTION_TYPE_T; typedef enum { - STATIC_MODE = 1, - DYNAMIC_MODE = 2, - MIMO_MODE = 3, /* power save disable */ + STATIC_MODE = 1, + DYNAMIC_MODE = 2, + MIMO_MODE = 3, /* power save disable */ } N_SMPS_MODE_T; typedef enum { @@ -408,562 +315,632 @@ typedef enum { SW_TRIGGER_ABORT, } TX_ABORT_OPTION_T; -typedef enum { - WID_CHAR = 0, - WID_SHORT = 1, - WID_INT = 2, - WID_STR = 3, - WID_BIN_DATA = 4, - WID_BIN = 5, - WID_IP = 6, - WID_ADR = 7, - WID_UNDEF = 8, - WID_TYPE_FORCE_32BIT = 0xFFFFFFFF - -} WID_TYPE_T, tenuWIDtype; +enum WID_TYPE { + WID_CHAR = 0, + WID_SHORT = 1, + WID_INT = 2, + WID_STR = 3, + WID_BIN_DATA = 4, + WID_BIN = 5, + WID_IP = 6, + WID_ADR = 7, + WID_UNDEF = 8, + WID_TYPE_FORCE_32BIT = 0xFFFFFFFF +}; typedef enum { - WID_NIL = 0xffff, - - - /* BSS Type */ - /* -------------------------------------------------------------- */ - /* Configuration : Infrastructure Independent Access Point */ - /* Values to set : 0 1 2 */ - /* -------------------------------------------------------------- */ - WID_BSS_TYPE = 0x0000, - - /* Transmit Rate */ - /* -------------------------------------------------------------- */ - /* Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 */ - /* Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 */ - /* -------------------------------------------------------------- */ - WID_CURRENT_TX_RATE = 0x0001, - - /* Channel */ - /* ------------------------------------------------------------------- */ - /* Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ - /* Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ - /* -------------------------------------------------------------------- */ - WID_CURRENT_CHANNEL = 0x0002, - - /* Preamble */ - /* -------------------------------------------------------------- */ - /* Configuration : short long Auto */ - /* Values to set : 0 1 2 */ - /* -------------------------------------------------------------- */ - WID_PREAMBLE = 0x0003, - - /* 11g operating mode (ignored if 11g not present) */ - /* -------------------------------------------------------------- */ - /* Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) */ - /* Values to set : 1 2 3 */ - /* -------------------------------------------------------------- */ - WID_11G_OPERATING_MODE = 0x0004, - - /* Mac status (response only) */ - /* -------------------------------------------------------------- */ - /* Configuration : disconnect connect */ - /* Values to get : 0 1 */ - /* -------------------------------------------------------------- */ - WID_STATUS = 0x0005, - - /* Scan type */ - /* -------------------------------------------------------------- */ - /* Configuration : Passive Scanning Active Scanning */ - /* Values to set : 0 1 */ - /* -------------------------------------------------------------- */ - WID_SCAN_TYPE = 0x0007, - - /* Key Id (WEP default key Id) */ - /* -------------------------------------------------------------- */ - /* Configuration : Any value between 0 to 3 */ - /* Values to set : Same value. Default is 0 */ - /* -------------------------------------------------------------- */ - WID_KEY_ID = 0x0009, - - /* QoS Enable */ - /* -------------------------------------------------------------- */ - /* Configuration : QoS Disable WMM Enable */ - /* Values to set : 0 1 */ - /* -------------------------------------------------------------- */ - WID_QOS_ENABLE = 0x000A, - - /* Power Management */ - /* ------------------------------------------------------------------ */ - /* Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE */ - /* Values to set : 0 1 2 */ - /* ------------------------------------------------------------------ */ - WID_POWER_MANAGEMENT = 0x000B, - - /* WEP/802 11I Configuration */ - /* ------------------------------------------------------------------ */ - /* Configuration : Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP */ - /* Values (0x) : 00 03 07 29 49 31 51 */ - /* */ - /* Configuration : WPA-AES+TKIP RSN-AES+TKIP */ - /* Values (0x) : 69 71 */ - /* ------------------------------------------------------------------ */ - WID_11I_MODE = 0x000C, - - /* WEP Configuration: Used in BSS STA mode only when WEP is enabled */ - /* ------------------------------------------------------------------ */ - /* Configuration : Open System Shared Key Any Type | 802.1x Auth */ - /* Values (0x) : 01 02 03 | BIT2 */ - /* ------------------------------------------------------------------ */ - WID_AUTH_TYPE = 0x000D, - - /* Site Survey Type */ - /* -------------------------------------------------------------- */ - /* Configuration : Values to set */ - /* Survey 1 Channel : 0 */ - /* survey all Channels : 1 */ - /* Disable Site Survey : 2 */ - /* -------------------------------------------------------------- */ - WID_SITE_SURVEY = 0x000E, - - /* Listen Interval */ - /* -------------------------------------------------------------- */ - /* Configuration : Any value between 1 to 255 */ - /* Values to set : Same value. Default is 3 */ - /* -------------------------------------------------------------- */ - WID_LISTEN_INTERVAL = 0x000F, - - /* DTIM Period */ - /* -------------------------------------------------------------- */ - /* Configuration : Any value between 1 to 255 */ - /* Values to set : Same value. Default is 3 */ - /* -------------------------------------------------------------- */ - WID_DTIM_PERIOD = 0x0010, - - /* ACK Policy */ - /* -------------------------------------------------------------- */ - /* Configuration : Normal Ack No Ack */ - /* Values to set : 0 1 */ - /* -------------------------------------------------------------- */ - WID_ACK_POLICY = 0x0011, - - /* Reset MAC (Set only) */ - /* -------------------------------------------------------------- */ - /* Configuration : Don't Reset Reset No Request */ - /* Values to set : 0 1 2 */ - /* -------------------------------------------------------------- */ - WID_RESET = 0x0012, - - /* Broadcast SSID Option: Setting this will adhere to "" SSID element */ - /* ------------------------------------------------------------------ */ - /* Configuration : Enable Disable */ - /* Values to set : 1 0 */ - /* ------------------------------------------------------------------ */ - WID_BCAST_SSID = 0x0015, - - /* Disconnect (Station) */ - /* ------------------------------------------------------------------ */ - /* Configuration : Association ID */ - /* Values to set : Association ID */ - /* ------------------------------------------------------------------ */ - WID_DISCONNECT = 0x0016, - - /* 11a Tx Power Level */ - /* -------------------------------------------------------------------- */ - /* Configuration : Sets TX Power (Higher the value greater the power) */ - /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/ - /* -------------------------------------------------------------------- */ - WID_TX_POWER_LEVEL_11A = 0x0018, - - /* Group Key Update Policy Selection */ - /* -------------------------------------------------------------------- */ - /* Configuration : Disabled timeBased packetBased timePacketBased */ - /* Values to set : 1 2 3 4 */ - /* -------------------------------------------------------------------- */ - WID_REKEY_POLICY = 0x0019, - - /* Allow Short Slot */ - /* -------------------------------------------------------------- */ - /* Configuration : Disallow Short Slot Allow Short Slot */ - /* (Enable Only Long Slot) (Enable Short Slot if applicable)*/ - /* Values to set : 0 1 */ - /* -------------------------------------------------------------- */ - WID_SHORT_SLOT_ALLOWED = 0x001A, - - WID_PHY_ACTIVE_REG = 0x001B, - - /* 11b Tx Power Level */ - /* -------------------------------------------------------------------- */ - /* Configuration : Sets TX Power (Higher the value greater the power) */ - /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/ - /* -------------------------------------------------------------------- */ - WID_TX_POWER_LEVEL_11B = 0x001D, - - /* Scan Request */ - /* -------------------------------------------------------------------- */ - /* Configuration : Request default scan */ - /* Values to set : 0 */ - /* -------------------------------------------------------------------- */ - WID_START_SCAN_REQ = 0x001E, - - /* Rssi (get only) */ - /* -------------------------------------------------------------------- */ - /* Configuration : */ - /* Values to get : Rssi value */ - /* -------------------------------------------------------------------- */ - WID_RSSI = 0x001F, - - /* Join Request */ - /* -------------------------------------------------------------------- */ - /* Configuration : Request to join */ - /* Values to set : index of scan result */ - /* -------------------------------------------------------------------- */ - WID_JOIN_REQ = 0x0020, - - WID_LINKSPEED = 0x0026, - - /* Enable User Control of TX Power */ - /* -------------------------------------------------------------------- */ - /* Configuration : Disable Enable */ - /* Values to set : 0 1 */ - /* -------------------------------------------------------------------- */ - WID_USER_CONTROL_ON_TX_POWER = 0x0027, - - WID_MEMORY_ACCESS_8BIT = 0x0029, - - /* Enable Auto RX Sensitivity feature */ - /* -------------------------------------------------------------------- */ - /* Configuration : Disable Enable */ - /* Values to set : 0 1 */ - /* -------------------------------------------------------------------- */ - WID_AUTO_RX_SENSITIVITY = 0x0032, - - /* Receive Buffer Based Ack */ - /* -------------------------------------------------------------------- */ - /* Configuration : Disable Enable */ - /* Values to set : 0 1 */ - /* -------------------------------------------------------------------- */ - WID_DATAFLOW_CONTROL = 0x0033, - - /* Scan Filter */ - /* -------------------------------------------------------------------- */ - /* Configuration : Class No filter AP only Station Only */ - /* Values to set : 0 1 2 */ - /* Configuration : Priority High Rssi Low Rssi Detect */ - /* Values to set : 0 0x4 0x08 */ - /* Configuration : Channel filter off filter on */ - /* Values to set : 0 0x10 */ - /* -------------------------------------------------------------------- */ - WID_SCAN_FILTER = 0x0036, - - /* Link Loss Threshold (measure in the beacon period) */ - /* -------------------------------------------------------------------- */ - /* Configuration : Any value between 10 and 254 (Set to 255 to disable it) */ - /* Values to set : Same value. Default is 10 */ - /* -------------------------------------------------------------------- */ - WID_LINK_LOSS_THRESHOLD = 0x0037, - - /*BugID_4978*/ - WID_ABORT_RUNNING_SCAN = 0x003E, + WID_NIL = 0xffff, + + /* + * BSS Type + * ----------------------------------------------------------- + * Configuration : Infrastructure Independent Access Point + * Values to set : 0 1 2 + * ----------------------------------------------------------- + */ + WID_BSS_TYPE = 0x0000, + + /* + * Transmit Rate + * ----------------------------------------------------------- + * Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 + * Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 + * ----------------------------------------------------------- + */ + WID_CURRENT_TX_RATE = 0x0001, + + /* + * Channel + * ----------------------------------------------------------- + * Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 + * Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 + * ----------------------------------------------------------- + */ + WID_CURRENT_CHANNEL = 0x0002, + + /* + * Preamble + * ----------------------------------------------------------- + * Configuration : short long Auto + * Values to set : 0 1 2 + * ----------------------------------------------------------- + */ + WID_PREAMBLE = 0x0003, + + /* + * 11g operating mode (ignored if 11g not present) + * ----------------------------------------------------------- + * Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) + * Values to set : 1 2 3 + * ----------------------------------------------------------- + */ + WID_11G_OPERATING_MODE = 0x0004, + + /* + * Mac status (response only) + * ----------------------------------------------------------- + * Configuration : disconnect connect + * Values to get : 0 1 + * ----------------------------------------------------------- + */ + WID_STATUS = 0x0005, + + /* + * Scan type + * ----------------------------------------------------------- + * Configuration : Passive Scanning Active Scanning + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_SCAN_TYPE = 0x0007, + + /* + * Key Id (WEP default key Id) + * ----------------------------------------------------------- + * Configuration : Any value between 0 to 3 + * Values to set : Same value. Default is 0 + * ----------------------------------------------------------- + */ + WID_KEY_ID = 0x0009, + + /* + * QoS Enable + * ----------------------------------------------------------- + * Configuration : QoS Disable WMM Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_QOS_ENABLE = 0x000A, + + /* + * Power Management + * ----------------------------------------------------------- + * Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE + * Values to set : 0 1 2 + * ----------------------------------------------------------- + */ + WID_POWER_MANAGEMENT = 0x000B, + + /* + * WEP/802 11I Configuration + * ----------------------------------------------------------- + * Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP + * Values (0x) : 00 03 07 29 49 31 51 + * Configuration:WPA-AES+TKIP RSN-AES+TKIP + * Values (0x) : 69 71 + * ----------------------------------------------------------- + */ + WID_11I_MODE = 0x000C, + + /* + * WEP Configuration: Used in BSS STA mode only when WEP is enabled + * ----------------------------------------------------------- + * Configuration : Open System Shared Key Any Type | 802.1x Auth + * Values (0x) : 01 02 03 | BIT2 + * ----------------------------------------------------------- + */ + WID_AUTH_TYPE = 0x000D, + + /* + * Site Survey Type + * ----------------------------------------------------------- + * Configuration : Values to set + * Survey 1 Channel : 0 + * survey all Channels : 1 + * Disable Site Survey : 2 + * ----------------------------------------------------------- + */ + WID_SITE_SURVEY = 0x000E, + + /* + * Listen Interval + * ----------------------------------------------------------- + * Configuration : Any value between 1 to 255 + * Values to set : Same value. Default is 3 + * ----------------------------------------------------------- + */ + WID_LISTEN_INTERVAL = 0x000F, + + /* + * DTIM Period + * ----------------------------------------------------------- + * Configuration : Any value between 1 to 255 + * Values to set : Same value. Default is 3 + * ----------------------------------------------------------- + */ + WID_DTIM_PERIOD = 0x0010, + + /* + * ACK Policy + * ----------------------------------------------------------- + * Configuration : Normal Ack No Ack + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_ACK_POLICY = 0x0011, + + /* + * Reset MAC (Set only) + * ----------------------------------------------------------- + * Configuration : Don't Reset Reset No Request + * Values to set : 0 1 2 + * ----------------------------------------------------------- + */ + WID_RESET = 0x0012, + + /* + * Broadcast SSID Option: Setting this will adhere to "" SSID element + * ----------------------------------------------------------- + * Configuration : Enable Disable + * Values to set : 1 0 + * ----------------------------------------------------------- + */ + WID_BCAST_SSID = 0x0015, + + /* + * Disconnect (Station) + * ----------------------------------------------------------- + * Configuration : Association ID + * Values to set : Association ID + * ----------------------------------------------------------- + */ + WID_DISCONNECT = 0x0016, + + /* + * 11a Tx Power Level + * ----------------------------------------------------------- + * Configuration : Sets TX Power (Higher the value greater the power) + * Values to set : Any value between 0 and 63 (inclusive Default 48) + * ----------------------------------------------------------- + */ + WID_TX_POWER_LEVEL_11A = 0x0018, + + /* + * Group Key Update Policy Selection + * ----------------------------------------------------------- + * Configuration : Disabled timeBased packetBased timePacketBased + * Values to set : 1 2 3 4 + * ----------------------------------------------------------- + */ + WID_REKEY_POLICY = 0x0019, + + /* + * Allow Short Slot + * ----------------------------------------------------------- + * Configuration : Disallow Short Slot Allow Short Slot + * (Enable Only Long Slot) (Enable Short Slot if applicable) + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_SHORT_SLOT_ALLOWED = 0x001A, + + WID_PHY_ACTIVE_REG = 0x001B, + + /* + * 11b Tx Power Level + * ----------------------------------------------------------- + * Configuration : Sets TX Power (Higher the value greater the power) + * Values to set : Any value between 0 and 63 (inclusive Default 48) + * ----------------------------------------------------------- + */ + WID_TX_POWER_LEVEL_11B = 0x001D, + + /* + * Scan Request + * ----------------------------------------------------------- + * Configuration : Request default scan + * Values to set : 0 + * ----------------------------------------------------------- + */ + WID_START_SCAN_REQ = 0x001E, + + /* + * Rssi (get only) + * ----------------------------------------------------------- + * Configuration : + * Values to get : Rssi value + * ----------------------------------------------------------- + */ + WID_RSSI = 0x001F, + + /* + * Join Request + * ----------------------------------------------------------- + * Configuration : Request to join + * Values to set : index of scan result + * ----------------------------------------------------------- + */ + WID_JOIN_REQ = 0x0020, + + WID_LINKSPEED = 0x0026, + + /* + * Enable User Control of TX Power + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_USER_CONTROL_ON_TX_POWER = 0x0027, + + WID_MEMORY_ACCESS_8BIT = 0x0029, + + /* + * Enable Auto RX Sensitivity feature + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_AUTO_RX_SENSITIVITY = 0x0032, + + /* + * Receive Buffer Based Ack + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_DATAFLOW_CONTROL = 0x0033, + + /* + * Scan Filter + * ----------------------------------------------------------- + * Configuration : Class No filter AP only Station Only + * Values to set : 0 1 2 + * Configuration : Priority High Rssi Low Rssi Detect + * Values to set : 0 0x4 0x0 + * Configuration : Channel filter off filter on + * Values to set : 0 0x10 + * ----------------------------------------------------------- + */ + WID_SCAN_FILTER = 0x0036, + + /* + * Link Loss Threshold (measure in the beacon period) + * ----------------------------------------------------------- + * Configuration : Any value between 10 and 254(Set to 255 disable) + * Values to set : Same value. Default is 10 + * ----------------------------------------------------------- + */ + WID_LINK_LOSS_THRESHOLD = 0x0037, + + WID_ABORT_RUNNING_SCAN = 0x003E, /* NMAC Character WID list */ - WID_WPS_START = 0x0043, - - /* Protection mode for MAC */ - /* -------------------------------------------------------------- */ - /* Configuration : Auto No protection ERP HT GF */ - /* Values to set : 0 1 2 3 4 */ - /* -------------------------------------------------------------- */ - WID_11N_PROT_MECH = 0x0080, - - /* ERP Protection type for MAC */ - /* -------------------------------------------------------------- */ - /* Configuration : Self-CTS RTS-CTS */ - /* Values to set : 0 1 */ - /* -------------------------------------------------------------- */ - WID_11N_ERP_PROT_TYPE = 0x0081, - - /* HT Option Enable */ - /* -------------------------------------------------------------- */ - /* Configuration : HT Enable HT Disable */ - /* Values to set : 1 0 */ - /* -------------------------------------------------------------- */ - WID_11N_ENABLE = 0x0082, - - /* 11n Operating mode (Note that 11g operating mode will also be */ - /* used in addition to this, if this is set to HT Mixed mode) */ - /* -------------------------------------------------------------- */ - /* Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz */ - /* Values to set : 1 2 3 */ - /* -------------------------------------------------------------- */ - WID_11N_OPERATING_MODE = 0x0083, - - /* 11n OBSS non-HT STA Detection flag */ - /* -------------------------------------------------------------- */ - /* Configuration : Do not detect */ - /* Values to set : 0 */ - /* Configuration : Detect, do not protect or report */ - /* Values to set : 1 */ - /* Configuration : Detect, protect and do not report */ - /* Values to set : 2 */ - /* Configuration : Detect, protect and report to other BSS */ - /* Values to set : 3 */ - /* -------------------------------------------------------------- */ - WID_11N_OBSS_NONHT_DETECTION = 0x0084, - - /* 11n HT Protection Type */ - /* -------------------------------------------------------------- */ - /* Configuration : RTS-CTS First Frame Exchange at non-HT-rate */ - /* Values to set : 0 1 */ - /* Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt */ - /* Values to set : 2 3 */ - /* -------------------------------------------------------------- */ - WID_11N_HT_PROT_TYPE = 0x0085, - - /* 11n RIFS Protection Enable Flag */ - /* -------------------------------------------------------------- */ - /* Configuration : Disable Enable */ - /* Values to set : 0 1 */ - /* -------------------------------------------------------------- */ - WID_11N_RIFS_PROT_ENABLE = 0x0086, - - /* SMPS Mode */ - /* -------------------------------------------------------------- */ - /* Configuration : Static Dynamic MIMO (Power Save Disabled) */ - /* Values to set : 1 2 3 */ - /* -------------------------------------------------------------- */ - WID_11N_SMPS_MODE = 0x0087, - - /* Current transmit MCS */ - /* -------------------------------------------------------------- */ - /* Configuration : MCS Index for data rate */ - /* Values to set : 0 to 7 */ - /* -------------------------------------------------------------- */ - WID_11N_CURRENT_TX_MCS = 0x0088, - - WID_11N_PRINT_STATS = 0x0089, - - /* 11n Short GI Enable Flag */ - /* -------------------------------------------------------------- */ - /* Configuration : Disable Enable */ - /* Values to set : 0 1 */ - /* -------------------------------------------------------------- */ - WID_11N_SHORT_GI_ENABLE = 0x008D, - - /* 11n RIFS Enable Flag */ - /* -------------------------------------------------------------- */ - /* Configuration : Disable Enable */ - /* Values to set : 0 1 */ - /* -------------------------------------------------------------- */ - WID_RIFS_MODE = 0x0094, - - /* TX Abort Feature */ - /* -------------------------------------------------------------- */ - /* Configuration : Disable Self CTS Enable Self CTS */ - /* Values to set : 0 1 */ - /* Configuration : Disable TX Abort Enable TX Abort */ - /* Values to set : 2 3 */ - /* Configuration : Enable HW TX Abort Enable SW TX Abort */ - /* Values to set : 4 5 */ - /* -------------------------------------------------------------- */ - WID_TX_ABORT_CONFIG = 0x00A1, - - WID_REG_TSSI_11B_VALUE = 0x00A6, - WID_REG_TSSI_11G_VALUE = 0x00A7, - WID_REG_TSSI_11N_VALUE = 0x00A8, - WID_TX_CALIBRATION = 0x00A9, - WID_DSCR_TSSI_11B_VALUE = 0x00AA, - WID_DSCR_TSSI_11G_VALUE = 0x00AB, - WID_DSCR_TSSI_11N_VALUE = 0x00AC, - - /* Immediate Block-Ack Support */ - /* -------------------------------------------------------------- */ - /* Configuration : Disable Enable */ - /* Values to set : 0 1 */ - /* -------------------------------------------------------------- */ - WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF, - - /* TXOP Disable Flag */ - /* -------------------------------------------------------------- */ - /* Configuration : Disable Enable */ - /* Values to set : 1 0 */ - /* -------------------------------------------------------------- */ - WID_11N_TXOP_PROT_DISABLE = 0x00B0, - - - WID_TX_POWER_LEVEL_11N = 0x00B1, + WID_WPS_START = 0x0043, + + /* + * Protection mode for MAC + * ----------------------------------------------------------- + * Configuration : Auto No protection ERP HT GF + * Values to set : 0 1 2 3 4 + * ----------------------------------------------------------- + */ + WID_11N_PROT_MECH = 0x0080, + + /* + * ERP Protection type for MAC + * ----------------------------------------------------------- + * Configuration : Self-CTS RTS-CTS + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_11N_ERP_PROT_TYPE = 0x0081, + + /* + * HT Option Enable + * ----------------------------------------------------------- + * Configuration : HT Enable HT Disable + * Values to set : 1 0 + * ----------------------------------------------------------- + */ + WID_11N_ENABLE = 0x0082, + + /* + * 11n Operating mode (Note that 11g operating mode will also be + * used in addition to this, if this is set to HT Mixed mode) + * ----------------------------------------------------------- + * Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz + * Values to set : 1 2 3 + * ----------------------------------------------------------- + */ + WID_11N_OPERATING_MODE = 0x0083, + + /* + * 11n OBSS non-HT STA Detection flag + * ----------------------------------------------------------- + * Configuration : Do not detect + * Values to set : 0 + * Configuration : Detect, do not protect or report + * Values to set : 1 + * Configuration : Detect, protect and do not report + * Values to set : 2 + * Configuration : Detect, protect and report to other BSS + * Values to set : 3 + * ----------------------------------------------------------- + */ + WID_11N_OBSS_NONHT_DETECTION = 0x0084, + + /* + * 11n HT Protection Type + * ----------------------------------------------------------- + * Configuration : RTS-CTS First Frame Exchange at non-HT-rate + * Values to set : 0 1 + * Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt + * Values to set : 2 3 + * ----------------------------------------------------------- + */ + WID_11N_HT_PROT_TYPE = 0x0085, + + /* + * 11n RIFS Protection Enable Flag + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_11N_RIFS_PROT_ENABLE = 0x0086, + + /* + * SMPS Mode + * ----------------------------------------------------------- + * Configuration : Static Dynamic MIMO (Power Save Disabled) + * Values to set : 1 2 3 + * ----------------------------------------------------------- + */ + WID_11N_SMPS_MODE = 0x0087, + + /* + * Current transmit MCS + * ----------------------------------------------------------- + * Configuration : MCS Index for data rate + * Values to set : 0 to 7 + * ----------------------------------------------------------- + */ + WID_11N_CURRENT_TX_MCS = 0x0088, + + WID_11N_PRINT_STATS = 0x0089, + + /* + * 11n Short GI Enable Flag + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_11N_SHORT_GI_ENABLE = 0x008D, + + /* + * 11n RIFS Enable Flag + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_RIFS_MODE = 0x0094, + + /* + * TX Abort Feature + * ----------------------------------------------------------- + * Configuration : Disable Self CTS Enable Self CTS + * Values to set : 0 1 + * Configuration : Disable TX Abort Enable TX Abort + * Values to set : 2 3 + * Configuration : Enable HW TX Abort Enable SW TX Abort + * Values to set : 4 5 + * ----------------------------------------------------------- + */ + WID_TX_ABORT_CONFIG = 0x00A1, + + WID_REG_TSSI_11B_VALUE = 0x00A6, + WID_REG_TSSI_11G_VALUE = 0x00A7, + WID_REG_TSSI_11N_VALUE = 0x00A8, + WID_TX_CALIBRATION = 0x00A9, + WID_DSCR_TSSI_11B_VALUE = 0x00AA, + WID_DSCR_TSSI_11G_VALUE = 0x00AB, + WID_DSCR_TSSI_11N_VALUE = 0x00AC, + + /* + * Immediate Block-Ack Support + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF, + + /* + * TXOP Disable Flag + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 1 0 + * ----------------------------------------------------------- + */ + WID_11N_TXOP_PROT_DISABLE = 0x00B0, + + WID_TX_POWER_LEVEL_11N = 0x00B1, /* Custom Character WID list */ - WID_PC_TEST_MODE = 0x00C8, - /*bug3819: */ + WID_PC_TEST_MODE = 0x00C8, /* SCAN Complete notification WID*/ WID_SCAN_COMPLETE = 0x00C9, -#ifdef WILC_AP_EXTERNAL_MLME - WID_DEL_BEACON = 0x00CA, -#endif - - WID_LOGTerminal_Switch = 0x00CD, - /* EMAC Short WID list */ - /* RTS Threshold */ - /* -------------------------------------------------------------- */ - /* Configuration : Any value between 256 to 2347 */ - /* Values to set : Same value. Default is 2347 */ - /* -------------------------------------------------------------- */ - WID_RTS_THRESHOLD = 0x1000, - - /* Fragmentation Threshold */ - /* -------------------------------------------------------------- */ - /* Configuration : Any value between 256 to 2346 */ - /* Values to set : Same value. Default is 2346 */ - /* -------------------------------------------------------------- */ - WID_FRAG_THRESHOLD = 0x1001, - - WID_SHORT_RETRY_LIMIT = 0x1002, - WID_LONG_RETRY_LIMIT = 0x1003, - WID_BEACON_INTERVAL = 0x1006, - WID_MEMORY_ACCESS_16BIT = 0x1008, - WID_RX_SENSE = 0x100B, - WID_ACTIVE_SCAN_TIME = 0x100C, - WID_PASSIVE_SCAN_TIME = 0x100D, - - WID_SITE_SURVEY_SCAN_TIME = 0x100E, - WID_JOIN_START_TIMEOUT = 0x100F, - WID_AUTH_TIMEOUT = 0x1010, - WID_ASOC_TIMEOUT = 0x1011, - WID_11I_PROTOCOL_TIMEOUT = 0x1012, - WID_EAPOL_RESPONSE_TIMEOUT = 0x1013, + WID_DEL_BEACON = 0x00CA, + + WID_LOGTerminal_Switch = 0x00CD, + /* EMAC Short WID list */ + /* RTS Threshold */ + /* + * ----------------------------------------------------------- + * Configuration : Any value between 256 to 2347 + * Values to set : Same value. Default is 2347 + * ----------------------------------------------------------- + */ + WID_RTS_THRESHOLD = 0x1000, + + /* + * Fragmentation Threshold + * ----------------------------------------------------------- + * Configuration : Any value between 256 to 2346 + * Values to set : Same value. Default is 2346 + * ----------------------------------------------------------- + */ + WID_FRAG_THRESHOLD = 0x1001, + + WID_SHORT_RETRY_LIMIT = 0x1002, + WID_LONG_RETRY_LIMIT = 0x1003, + WID_BEACON_INTERVAL = 0x1006, + WID_MEMORY_ACCESS_16BIT = 0x1008, + WID_RX_SENSE = 0x100B, + WID_ACTIVE_SCAN_TIME = 0x100C, + WID_PASSIVE_SCAN_TIME = 0x100D, + + WID_SITE_SURVEY_SCAN_TIME = 0x100E, + WID_JOIN_START_TIMEOUT = 0x100F, + WID_AUTH_TIMEOUT = 0x1010, + WID_ASOC_TIMEOUT = 0x1011, + WID_11I_PROTOCOL_TIMEOUT = 0x1012, + WID_EAPOL_RESPONSE_TIMEOUT = 0x1013, /* NMAC Short WID list */ - WID_11N_SIG_QUAL_VAL = 0x1085, - WID_CCA_THRESHOLD = 0x1087, + WID_11N_SIG_QUAL_VAL = 0x1085, + WID_CCA_THRESHOLD = 0x1087, /* Custom Short WID list */ /* EMAC Integer WID list */ - WID_FAILED_COUNT = 0x2000, - WID_RETRY_COUNT = 0x2001, - WID_MULTIPLE_RETRY_COUNT = 0x2002, - WID_FRAME_DUPLICATE_COUNT = 0x2003, - WID_ACK_FAILURE_COUNT = 0x2004, - WID_RECEIVED_FRAGMENT_COUNT = 0x2005, - WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006, - WID_FCS_ERROR_COUNT = 0x2007, - WID_SUCCESS_FRAME_COUNT = 0x2008, - WID_HUT_TX_COUNT = 0x200A, - WID_TX_FRAGMENT_COUNT = 0x200B, - WID_TX_MULTICAST_FRAME_COUNT = 0x200C, - WID_RTS_SUCCESS_COUNT = 0x200D, - WID_RTS_FAILURE_COUNT = 0x200E, - WID_WEP_UNDECRYPTABLE_COUNT = 0x200F, - WID_REKEY_PERIOD = 0x2010, - WID_REKEY_PACKET_COUNT = 0x2011, - WID_1X_SERV_ADDR = 0x2012, - WID_STACK_IP_ADDR = 0x2013, - WID_STACK_NETMASK_ADDR = 0x2014, - WID_HW_RX_COUNT = 0x2015, - WID_MEMORY_ADDRESS = 0x201E, - WID_MEMORY_ACCESS_32BIT = 0x201F, - WID_RF_REG_VAL = 0x2021, - + WID_FAILED_COUNT = 0x2000, + WID_RETRY_COUNT = 0x2001, + WID_MULTIPLE_RETRY_COUNT = 0x2002, + WID_FRAME_DUPLICATE_COUNT = 0x2003, + WID_ACK_FAILURE_COUNT = 0x2004, + WID_RECEIVED_FRAGMENT_COUNT = 0x2005, + WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006, + WID_FCS_ERROR_COUNT = 0x2007, + WID_SUCCESS_FRAME_COUNT = 0x2008, + WID_HUT_TX_COUNT = 0x200A, + WID_TX_FRAGMENT_COUNT = 0x200B, + WID_TX_MULTICAST_FRAME_COUNT = 0x200C, + WID_RTS_SUCCESS_COUNT = 0x200D, + WID_RTS_FAILURE_COUNT = 0x200E, + WID_WEP_UNDECRYPTABLE_COUNT = 0x200F, + WID_REKEY_PERIOD = 0x2010, + WID_REKEY_PACKET_COUNT = 0x2011, + WID_1X_SERV_ADDR = 0x2012, + WID_STACK_IP_ADDR = 0x2013, + WID_STACK_NETMASK_ADDR = 0x2014, + WID_HW_RX_COUNT = 0x2015, + WID_MEMORY_ADDRESS = 0x201E, + WID_MEMORY_ACCESS_32BIT = 0x201F, + WID_RF_REG_VAL = 0x2021, /* NMAC Integer WID list */ - WID_11N_PHY_ACTIVE_REG_VAL = 0x2080, + WID_11N_PHY_ACTIVE_REG_VAL = 0x2080, /* Custom Integer WID list */ - WID_GET_INACTIVE_TIME = 0x2084, - WID_SET_DRV_HANDLER = 0X2085, - WID_SET_OPERATION_MODE = 0X2086, + WID_GET_INACTIVE_TIME = 0x2084, + WID_SET_DRV_HANDLER = 0X2085, + WID_SET_OPERATION_MODE = 0X2086, /* EMAC String WID list */ - WID_SSID = 0x3000, - WID_FIRMWARE_VERSION = 0x3001, - WID_OPERATIONAL_RATE_SET = 0x3002, - WID_BSSID = 0x3003, - WID_WEP_KEY_VALUE = 0x3004, - WID_11I_PSK = 0x3008, - WID_11E_P_ACTION_REQ = 0x3009, - WID_1X_KEY = 0x300A, - WID_HARDWARE_VERSION = 0x300B, - WID_MAC_ADDR = 0x300C, - WID_HUT_DEST_ADDR = 0x300D, - WID_PHY_VERSION = 0x300F, - WID_SUPP_USERNAME = 0x3010, - WID_SUPP_PASSWORD = 0x3011, - WID_SITE_SURVEY_RESULTS = 0x3012, - WID_RX_POWER_LEVEL = 0x3013, - WID_DEL_ALL_RX_BA = 0x3014, - WID_SET_STA_MAC_INACTIVE_TIME = 0x3017, - WID_ADD_WEP_KEY = 0x3019, - WID_REMOVE_WEP_KEY = 0x301A, - WID_ADD_PTK = 0x301B, - WID_ADD_RX_GTK = 0x301C, - WID_ADD_TX_GTK = 0x301D, - WID_REMOVE_KEY = 0x301E, - WID_ASSOC_REQ_INFO = 0x301F, - WID_ASSOC_RES_INFO = 0x3020, - WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */ - WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */ - WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */ - WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */ + WID_SSID = 0x3000, + WID_FIRMWARE_VERSION = 0x3001, + WID_OPERATIONAL_RATE_SET = 0x3002, + WID_BSSID = 0x3003, + WID_WEP_KEY_VALUE = 0x3004, + WID_11I_PSK = 0x3008, + WID_11E_P_ACTION_REQ = 0x3009, + WID_1X_KEY = 0x300A, + WID_HARDWARE_VERSION = 0x300B, + WID_MAC_ADDR = 0x300C, + WID_HUT_DEST_ADDR = 0x300D, + WID_PHY_VERSION = 0x300F, + WID_SUPP_USERNAME = 0x3010, + WID_SUPP_PASSWORD = 0x3011, + WID_SITE_SURVEY_RESULTS = 0x3012, + WID_RX_POWER_LEVEL = 0x3013, + WID_DEL_ALL_RX_BA = 0x3014, + WID_SET_STA_MAC_INACTIVE_TIME = 0x3017, + WID_ADD_WEP_KEY = 0x3019, + WID_REMOVE_WEP_KEY = 0x301A, + WID_ADD_PTK = 0x301B, + WID_ADD_RX_GTK = 0x301C, + WID_ADD_TX_GTK = 0x301D, + WID_REMOVE_KEY = 0x301E, + WID_ASSOC_REQ_INFO = 0x301F, + WID_ASSOC_RES_INFO = 0x3020, + WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */ + WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */ + WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */ + WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */ /* NMAC String WID list */ - WID_11N_P_ACTION_REQ = 0x3080, - WID_HUT_TEST_ID = 0x3081, - WID_PMKID_INFO = 0x3082, - WID_FIRMWARE_INFO = 0x3083, - #ifdef WILC_P2P - WID_REGISTER_FRAME = 0x3084, - #endif - WID_DEL_ALL_STA = 0x3085, - #ifdef WILC_P2P - WID_REMAIN_ON_CHAN = 0x3996, - #endif - /*BugID_4156*/ - WID_SSID_PROBE_REQ = 0x3997, - /*BugID_4124 WID to trigger modified Join Request using SSID and BSSID instead of bssListIdx (used by WID_JOIN_REQ)*/ - WID_JOIN_REQ_EXTENDED = 0x3998, - - /* BugID 4951: WID toset IP address in firmware */ - WID_IP_ADDRESS = 0x3999, - - + WID_11N_P_ACTION_REQ = 0x3080, + WID_HUT_TEST_ID = 0x3081, + WID_PMKID_INFO = 0x3082, + WID_FIRMWARE_INFO = 0x3083, + WID_REGISTER_FRAME = 0x3084, + WID_DEL_ALL_STA = 0x3085, + WID_REMAIN_ON_CHAN = 0x3996, + WID_SSID_PROBE_REQ = 0x3997, + WID_JOIN_REQ_EXTENDED = 0x3998, + + WID_IP_ADDRESS = 0x3999, /* Custom String WID list */ /* EMAC Binary WID list */ - WID_UAPSD_CONFIG = 0x4001, - WID_UAPSD_STATUS = 0x4002, - WID_WMM_AP_AC_PARAMS = 0x4003, - WID_WMM_STA_AC_PARAMS = 0x4004, - WID_NETWORK_INFO = 0x4005, - WID_STA_JOIN_INFO = 0x4006, - WID_CONNECTED_STA_LIST = 0x4007, + WID_UAPSD_CONFIG = 0x4001, + WID_UAPSD_STATUS = 0x4002, + WID_WMM_AP_AC_PARAMS = 0x4003, + WID_WMM_STA_AC_PARAMS = 0x4004, + WID_NETWORK_INFO = 0x4005, + WID_STA_JOIN_INFO = 0x4006, + WID_CONNECTED_STA_LIST = 0x4007, /* NMAC Binary WID list */ - WID_11N_AUTORATE_TABLE = 0x4080, + WID_11N_AUTORATE_TABLE = 0x4080, + WID_SCAN_CHANNEL_LIST = 0x4084, - /*Added here by Amr - BugID 4134*/ - WID_SCAN_CHANNEL_LIST = 0x4084, + WID_INFO_ELEMENT_PROBE = 0x4085, + WID_INFO_ELEMENT_ASSOCIATE = 0x4086, + WID_ADD_STA = 0X4087, + WID_REMOVE_STA = 0X4088, + WID_EDIT_STA = 0X4089, + WID_ADD_BEACON = 0x408a, - /*BugID_3746 WID to add IE to be added in next probe request*/ - WID_INFO_ELEMENT_PROBE = 0x4085, - /*BugID_3746 WID to add IE to be added in next associate request*/ - WID_INFO_ELEMENT_ASSOCIATE = 0x4086, - WID_ADD_STA = 0X4087, - WID_REMOVE_STA = 0X4088, - WID_EDIT_STA = 0X4089, - WID_ADD_BEACON = 0x408a, - - /* BugID 5108 */ WID_SETUP_MULTICAST_FILTER = 0x408b, /* Miscellaneous WIDs */ - WID_ALL = 0x7FFE, - WID_MAX = 0xFFFF + WID_ALL = 0x7FFE, + WID_MAX = 0xFFFF } WID_T; -int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup); +int wilc_wlan_init(wilc_wlan_inp_t *inp); void wilc_bus_set_max_speed(void); void wilc_bus_set_default_speed(void); -uint32_t wilc_get_chipid(uint8_t update); - +u32 wilc_get_chipid(u8 update); #endif |