Staging: remove wusbcore and UWB from the kernel tree.

It's been over 6 months, and no one has noticed that these drivers are
deleted, probably because no one actually has this hardware.  As no one
has volunteered to maintain the code, let's drop it for good.

Link: https://lore.kernel.org/r/20200210231417.GA1736729@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 426 deletions

diff --git a/drivers/staging/wusbcore/rh.c b/drivers/staging/wusbcore/rh.c
deleted file mode 100644
index 20c08cd9dcbf..000000000000
--- a/drivers/staging/wusbcore/rh.c
+++ /dev/null
@@ -1,426 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless USB Host Controller
- * Root Hub operations
- *
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * We fake a root hub that has fake ports (as many as simultaneous
- * devices the Wireless USB Host Controller can deal with). For each
- * port we keep an state in @wusbhc->port[index] identical to the one
- * specified in the USB2.0[ch11] spec and some extra device
- * information that complements the one in 'struct usb_device' (as
- * this lacs a hcpriv pointer).
- *
- * Note this is common to WHCI and HWA host controllers.
- *
- * Through here we enable most of the state changes that the USB stack
- * will use to connect or disconnect devices. We need to do some
- * forced adaptation of Wireless USB device states vs. wired:
- *
- *        USB:                 WUSB:
- *
- * Port   Powered-off          port slot n/a
- *        Powered-on           port slot available
- *        Disconnected         port slot available
- *        Connected            port slot assigned device
- *        		       device sent DN_Connect
- *                             device was authenticated
- *        Enabled              device is authenticated, transitioned
- *                             from unauth -> auth -> default address
- *                             -> enabled
- *        Reset                disconnect
- *        Disable              disconnect
- *
- * This maps the standard USB port states with the WUSB device states
- * so we can fake ports without having to modify the USB stack.
- *
- * FIXME: this process will change in the future
- *
- *
- * ENTRY POINTS
- *
- * Our entry points into here are, as in hcd.c, the USB stack root hub
- * ops defined in the usb_hcd struct:
- *
- * wusbhc_rh_status_data()	Provide hub and port status data bitmap
- *
- * wusbhc_rh_control()          Execution of all the major requests
- *                              you can do to a hub (Set|Clear
- *                              features, get descriptors, status, etc).
- *
- * wusbhc_rh_[suspend|resume]() That
- *
- * wusbhc_rh_start_port_reset() ??? unimplemented
- */
-#include <linux/slab.h>
-#include <linux/export.h>
-#include "wusbhc.h"
-
-/*
- * Reset a fake port
- *
- * Using a Reset Device IE is too heavyweight as it causes the device
- * to enter the UnConnected state and leave the cluster, this can mean
- * that when the device reconnects it is connected to a different fake
- * port.
- *
- * Instead, reset authenticated devices with a SetAddress(0), followed
- * by a SetAddresss(AuthAddr).
- *
- * For unauthenticated devices just pretend to reset but do nothing.
- * If the device initialization continues to fail it will eventually
- * time out after TrustTimeout and enter the UnConnected state.
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- *
- * Supposedly we are the only thread accesing @wusbhc->port; in any
- * case, maybe we should move the mutex locking from
- * wusbhc_devconnect_auth() to here.
- *
- * @port_idx refers to the wusbhc's port index, not the USB port number
- */
-static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx)
-{
-	int result = 0;
-	struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
-	struct wusb_dev *wusb_dev = port->wusb_dev;
-
-	if (wusb_dev == NULL)
-		return -ENOTCONN;
-
-	port->status |= USB_PORT_STAT_RESET;
-	port->change |= USB_PORT_STAT_C_RESET;
-
-	if (wusb_dev->addr & WUSB_DEV_ADDR_UNAUTH)
-		result = 0;
-	else
-		result = wusb_dev_update_address(wusbhc, wusb_dev);
-
-	port->status &= ~USB_PORT_STAT_RESET;
-	port->status |= USB_PORT_STAT_ENABLE;
-	port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE;	
-
-	return result;
-}
-
-/*
- * Return the hub change status bitmap
- *
- * The bits in the change status bitmap are cleared when a
- * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4].
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- *
- * WARNING!! This gets called from atomic context; we cannot get the
- *           mutex--the only race condition we can find is some bit
- *           changing just after we copy it, which shouldn't be too
- *           big of a problem [and we can't make it an spinlock
- *           because other parts need to take it and sleep] .
- *
- *           @usb_hcd is refcounted, so it won't disappear under us
- *           and before killing a host, the polling of the root hub
- *           would be stopped anyway.
- */
-int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf)
-{
-	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
-	size_t cnt, size, bits_set = 0;
-
-	/* WE DON'T LOCK, see comment */
-	/* round up to bytes.  Hub bit is bit 0 so add 1. */
-	size = DIV_ROUND_UP(wusbhc->ports_max + 1, 8);
-
-	/* clear the output buffer. */
-	memset(_buf, 0, size);
-	/* set the bit for each changed port. */
-	for (cnt = 0; cnt < wusbhc->ports_max; cnt++) {
-
-		if (wusb_port_by_idx(wusbhc, cnt)->change) {
-			const int bitpos = cnt+1;
-
-			_buf[bitpos/8] |= (1 << (bitpos % 8));
-			bits_set++;
-		}
-	}
-
-	return bits_set ? size : 0;
-}
-EXPORT_SYMBOL_GPL(wusbhc_rh_status_data);
-
-/*
- * Return the hub's descriptor
- *
- * NOTE: almost cut and paste from ehci-hub.c
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked
- */
-static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue,
-				   u16 wIndex,
-				   struct usb_hub_descriptor *descr,
-				   u16 wLength)
-{
-	u16 temp = 1 + (wusbhc->ports_max / 8);
-	u8 length = 7 + 2 * temp;
-
-	if (wLength < length)
-		return -ENOSPC;
-	descr->bDescLength = 7 + 2 * temp;
-	descr->bDescriptorType = USB_DT_HUB; /* HUB type */
-	descr->bNbrPorts = wusbhc->ports_max;
-	descr->wHubCharacteristics = cpu_to_le16(
-		HUB_CHAR_COMMON_LPSM	/* All ports power at once */
-		| 0x00			/* not part of compound device */
-		| HUB_CHAR_NO_OCPM	/* No overcurrent protection */
-		| 0x00			/* 8 FS think time FIXME ?? */
-		| 0x00);		/* No port indicators */
-	descr->bPwrOn2PwrGood = 0;
-	descr->bHubContrCurrent = 0;
-	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
-	memset(&descr->u.hs.DeviceRemovable[0], 0, temp);
-	memset(&descr->u.hs.DeviceRemovable[temp], 0xff, temp);
-	return 0;
-}
-
-/*
- * Clear a hub feature
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- *
- * Nothing to do, so no locking needed ;)
- */
-static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature)
-{
-	int result;
-
-	switch (feature) {
-	case C_HUB_LOCAL_POWER:
-		/* FIXME: maybe plug bit 0 to the power input status,
-		 * if any?
-		 * see wusbhc_rh_get_hub_status() */
-	case C_HUB_OVER_CURRENT:
-		result = 0;
-		break;
-	default:
-		result = -EPIPE;
-	}
-	return result;
-}
-
-/*
- * Return hub status (it is always zero...)
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- *
- * Nothing to do, so no locking needed ;)
- */
-static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf,
-				    u16 wLength)
-{
-	/* FIXME: maybe plug bit 0 to the power input status (if any)? */
-	*buf = 0;
-	return 0;
-}
-
-/*
- * Set a port feature
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- */
-static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature,
-				   u8 selector, u8 port_idx)
-{
-	struct device *dev = wusbhc->dev;
-
-	if (port_idx > wusbhc->ports_max)
-		return -EINVAL;
-
-	switch (feature) {
-		/* According to USB2.0[11.24.2.13]p2, these features
-		 * are not required to be implemented. */
-	case USB_PORT_FEAT_C_OVER_CURRENT:
-	case USB_PORT_FEAT_C_ENABLE:
-	case USB_PORT_FEAT_C_SUSPEND:
-	case USB_PORT_FEAT_C_CONNECTION:
-	case USB_PORT_FEAT_C_RESET:
-		return 0;
-	case USB_PORT_FEAT_POWER:
-		/* No such thing, but we fake it works */
-		mutex_lock(&wusbhc->mutex);
-		wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER;
-		mutex_unlock(&wusbhc->mutex);
-		return 0;
-	case USB_PORT_FEAT_RESET:
-		return wusbhc_rh_port_reset(wusbhc, port_idx);
-	case USB_PORT_FEAT_ENABLE:
-	case USB_PORT_FEAT_SUSPEND:
-		dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n",
-			port_idx, feature, selector);
-		return -ENOSYS;
-	default:
-		dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n",
-			port_idx, feature, selector);
-		return -EPIPE;
-	}
-
-	return 0;
-}
-
-/*
- * Clear a port feature...
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- */
-static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature,
-				     u8 selector, u8 port_idx)
-{
-	int result = 0;
-	struct device *dev = wusbhc->dev;
-
-	if (port_idx > wusbhc->ports_max)
-		return -EINVAL;
-
-	mutex_lock(&wusbhc->mutex);
-	switch (feature) {
-	case USB_PORT_FEAT_POWER:	/* fake port always on */
-		/* According to USB2.0[11.24.2.7.1.4], no need to implement? */
-	case USB_PORT_FEAT_C_OVER_CURRENT:
-		break;
-	case USB_PORT_FEAT_C_RESET:
-		wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET;
-		break;
-	case USB_PORT_FEAT_C_CONNECTION:
-		wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION;
-		break;
-	case USB_PORT_FEAT_ENABLE:
-		__wusbhc_dev_disable(wusbhc, port_idx);
-		break;
-	case USB_PORT_FEAT_C_ENABLE:
-		wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE;
-		break;
-	case USB_PORT_FEAT_SUSPEND:
-	case USB_PORT_FEAT_C_SUSPEND:
-		dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n",
-			port_idx, feature, selector);
-		result = -ENOSYS;
-		break;
-	default:
-		dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n",
-			port_idx, feature, selector);
-		result = -EPIPE;
-		break;
-	}
-	mutex_unlock(&wusbhc->mutex);
-
-	return result;
-}
-
-/*
- * Return the port's status
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- */
-static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx,
-				     u32 *_buf, u16 wLength)
-{
-	__le16 *buf = (__le16 *)_buf;
-
-	if (port_idx > wusbhc->ports_max)
-		return -EINVAL;
-
-	mutex_lock(&wusbhc->mutex);
-	buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status);
-	buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change);
-	mutex_unlock(&wusbhc->mutex);
-
-	return 0;
-}
-
-/*
- * Entry point for Root Hub operations
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- */
-int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue,
-		      u16 wIndex, char *buf, u16 wLength)
-{
-	int result = -ENOSYS;
-	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
-
-	switch (reqntype) {
-	case GetHubDescriptor:
-		result = wusbhc_rh_get_hub_descr(
-			wusbhc, wValue, wIndex,
-			(struct usb_hub_descriptor *) buf, wLength);
-		break;
-	case ClearHubFeature:
-		result = wusbhc_rh_clear_hub_feat(wusbhc, wValue);
-		break;
-	case GetHubStatus:
-		result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength);
-		break;
-
-	case SetPortFeature:
-		result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8,
-						 (wIndex & 0xff) - 1);
-		break;
-	case ClearPortFeature:
-		result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8,
-						   (wIndex & 0xff) - 1);
-		break;
-	case GetPortStatus:
-		result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1,
-						   (u32 *)buf, wLength);
-		break;
-
-	case SetHubFeature:
-	default:
-		dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) "
-			"UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype,
-			wValue, wIndex, buf, wLength);
-		/* dump_stack(); */
-		result = -ENOSYS;
-	}
-	return result;
-}
-EXPORT_SYMBOL_GPL(wusbhc_rh_control);
-
-int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx)
-{
-	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
-	dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n",
-		__func__, usb_hcd, wusbhc, port_idx);
-	WARN_ON(1);
-	return -ENOSYS;
-}
-EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset);
-
-static void wusb_port_init(struct wusb_port *port)
-{
-	port->status |= USB_PORT_STAT_HIGH_SPEED;
-}
-
-/*
- * Alloc fake port specific fields and status.
- */
-int wusbhc_rh_create(struct wusbhc *wusbhc)
-{
-	int result = -ENOMEM;
-	size_t port_size, itr;
-	port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]);
-	wusbhc->port = kzalloc(port_size, GFP_KERNEL);
-	if (wusbhc->port == NULL)
-		goto error_port_alloc;
-	for (itr = 0; itr < wusbhc->ports_max; itr++)
-		wusb_port_init(&wusbhc->port[itr]);
-	result = 0;
-error_port_alloc:
-	return result;
-}
-
-void wusbhc_rh_destroy(struct wusbhc *wusbhc)
-{
-	kfree(wusbhc->port);
-}