Staging: comedi: hwdrv_apci3120.c: Checkpatch cleanup

ERROR: do not initialise statics to 0 or NULL
+static unsigned int ui_Temp = 0;

WARNING: braces {} are not necessary for any arm of this statement
+		if (data[1]) {
[...]
+		} else
[...]

WARNING: braces {} are not necessary for single statement blocks
+		for (i = 0; i < devpriv->ui_AiNbrofChannels; i++) {
+			devpriv->ui_AiChannelList[i] = data[4 + i];
+		}

ERROR: that open brace { should be on the previous line
+	} else			/*  EOC */
+	{

WARNING: braces {} are not necessary for any arm of this statement
+		if (data[1]) {
[...]
+		} else {
[...]

ERROR: that open brace { should be on the previous line
+	if (insn->unused[0] == 222)	/*  second insn read */
+	{

WARNING: braces {} are not necessary for single statement blocks
+		for (i = 0; i < insn->n; i++) {
+			data[i] = devpriv->ui_AiReadData[i];
+		}

WARNING: braces {} are not necessary for single statement blocks
+	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) {
+		err++;
+	}

ERROR: that open brace { should be on the previous line
+	if (cmd->scan_begin_src == TRIG_TIMER)	/*  Test Delay timing */
+	{

ERROR: that open brace { should be on the previous line
+	if (cmd->convert_src == TRIG_TIMER)	/*  Test Acquisition timing */
+	{

WARNING: braces {} are not necessary for any arm of this statement
+	if (cmd->stop_src == TRIG_COUNT) {
[...]
+	} else {
[...]

WARNING: braces {} are not necessary for single statement blocks
+	if (devpriv->b_ExttrigEnable == APCI3120_ENABLE) {
+		i_APCI3120_ExttrigEnable(dev);	/*  activate EXT trigger */
+	}

WARNING: braces {} are not necessary for single statement blocks
+			if (dmalen0 > (devpriv->ui_AiDataLength)) {
+				dmalen0 = devpriv->ui_AiDataLength;
+			}

WARNING: braces {} are not necessary for single statement blocks
+			if (dmalen1 > (devpriv->ui_AiDataLength)) {
+				dmalen1 = devpriv->ui_AiDataLength;
+			}

WARNING: braces {} are not necessary for any arm of this statement
+		if (CR_RANGE(chanlist[i]) < APCI3120_BIPOLAR_RANGES) {
[...]
+		} else {
[...]

ERROR: that open brace { should be on the previous line
+		if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE)	/*  enable this in without DMA ??? */
+		{

ERROR: that open brace { should be on the previous line
+	if (data[0] == APCI3120_TIMER)	/* initialize timer */
+	{

ERROR: that open brace { should be on the previous line
+	} else			/*  Initialize Watch dog */
+	{

ERROR: that open brace { should be on the previous line
+	if (data[0] == 2)	/*  write new value */
+	{

ERROR: that open brace { should be on the previous line
+		if (devpriv->b_Timer2Mode == APCI3120_TIMER)	/* start timer */
+		{

ERROR: that open brace { should be on the previous line
+		} else		/* start watch dog */
+		{

ERROR: that open brace { should be on the previous line
+		if (devpriv->b_Timer2Mode == APCI3120_TIMER)	/* start timer */
+		{

ERROR: that open brace { should be on the previous line
+	} else			/*  Read watch dog status */
+	{

WARNING: braces {} are not necessary for single statement blocks
+	if (!devpriv->b_OutputMemoryStatus) {
+		ui_Temp = 0;
+
+	}			/* if(!devpriv->b_OutputMemoryStatus ) */

ERROR: code indent should use tabs where possible
+                      data[0]     Value to be written$

ERROR: code indent should use tabs where possible
+                      data[1]    :1 Set digital o/p ON$

ERROR: code indent should use tabs where possible
+                      data[1]     2 Set digital o/p OFF with memory ON$

ERROR: that open brace { should be on the previous line
+	if (ui_Range)		/*  if 1 then unipolar */
+	{

ERROR: that open brace { should be on the previous line
+	} else			/*  if 0 then   bipolar */
+	{

ERROR: that open brace { should be on the previous line
+	do			/* Waiting of DA_READY BIT */
+	{

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 46 insertions, 73 deletions

diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index 07123fd766a3..f93ddd4eb06c 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -45,7 +45,7 @@ You should also find the complete GPL in the COPYING file accompanying this sour
 */
 
 #include "hwdrv_apci3120.h"
-static unsigned int ui_Temp = 0;
+static unsigned int ui_Temp;
 
 /* FUNCTION DEFINITIONS */
 
@@ -98,25 +98,22 @@ int i_APCI3120_InsnConfigAnalogInput(struct comedi_device *dev, struct comedi_su
 
 		devpriv->b_InterruptMode = APCI3120_EOS_MODE;
 
-		if (data[1]) {
+		if (data[1])
 			devpriv->b_EocEosInterrupt = APCI3120_ENABLE;
-		} else
+		else
 			devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
 		/*  Copy channel list and Range List to devpriv */
 
 		devpriv->ui_AiNbrofChannels = data[3];
-		for (i = 0; i < devpriv->ui_AiNbrofChannels; i++) {
+		for (i = 0; i < devpriv->ui_AiNbrofChannels; i++)
 			devpriv->ui_AiChannelList[i] = data[4 + i];
-		}
 
-	} else			/*  EOC */
-	{
+	} else {			/*  EOC */
 		devpriv->b_InterruptMode = APCI3120_EOC_MODE;
-		if (data[1]) {
+		if (data[1])
 			devpriv->b_EocEosInterrupt = APCI3120_ENABLE;
-		} else {
+		else
 			devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
-		}
 	}
 
 	return insn->n;
@@ -166,13 +163,9 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subd
 	devpriv->us_OutputRegister = 0;
 /* devpriv->b_DigitalOutputRegister=0; */
 
-	if (insn->unused[0] == 222)	/*  second insn read */
-	{
-
-		for (i = 0; i < insn->n; i++) {
+	if (insn->unused[0] == 222) {	/*  second insn read */
+		for (i = 0; i < insn->n; i++)
 			data[i] = devpriv->ui_AiReadData[i];
-		}
-
 	} else {
 		devpriv->tsk_Current = current;	/*  Save the current process task structure */
 /*
@@ -519,9 +512,8 @@ int i_APCI3120_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_s
 
 	/* step 2: make sure trigger sources are unique and mutually compatible */
 
-	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) {
+	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT)
 		err++;
-	}
 
 	if (cmd->scan_begin_src != TRIG_TIMER &&
 		cmd->scan_begin_src != TRIG_FOLLOW)
@@ -548,16 +540,14 @@ int i_APCI3120_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_s
 		err++;
 	}
 
-	if (cmd->scan_begin_src == TRIG_TIMER)	/*  Test Delay timing */
-	{
+	if (cmd->scan_begin_src == TRIG_TIMER) {	/*  Test Delay timing */
 		if (cmd->scan_begin_arg < this_board->ui_MinDelaytimeNs) {
 			cmd->scan_begin_arg = this_board->ui_MinDelaytimeNs;
 			err++;
 		}
 	}
 
-	if (cmd->convert_src == TRIG_TIMER)	/*  Test Acquisition timing */
-	{
+	if (cmd->convert_src == TRIG_TIMER) {	/*  Test Acquisition timing */
 		if (cmd->scan_begin_src == TRIG_TIMER) {
 			if ((cmd->convert_arg)
 				&& (cmd->convert_arg <
@@ -653,11 +643,10 @@ int i_APCI3120_CommandAnalogInput(struct comedi_device *dev, struct comedi_subde
 	/* UPDATE-0.7.57->0.7.68devpriv->ui_AiDataLength=s->async->data_len; */
 	devpriv->ui_AiDataLength = s->async->prealloc_bufsz;
 
-	if (cmd->stop_src == TRIG_COUNT) {
+	if (cmd->stop_src == TRIG_COUNT)
 		devpriv->ui_AiNbrofScans = cmd->stop_arg;
-	} else {
+	else
 		devpriv->ui_AiNbrofScans = 0;
-	}
 
 	devpriv->ui_AiTimer0 = 0;	/*  variables changed to timer0,timer1 */
 	devpriv->ui_AiTimer1 = 0;
@@ -849,9 +838,8 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
 	}
 /*** EL241003 End ******************************************************************************/
 
-	if (devpriv->b_ExttrigEnable == APCI3120_ENABLE) {
+	if (devpriv->b_ExttrigEnable == APCI3120_ENABLE)
 		i_APCI3120_ExttrigEnable(dev);	/*  activate EXT trigger */
-	}
 	switch (mode) {
 	case 1:
 		/*  init timer0 in mode 2 */
@@ -1049,12 +1037,10 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
 					dmalen1 = 4;
 			}
 		} else {	/*  isn't output buff smaller that our DMA buff? */
-			if (dmalen0 > (devpriv->ui_AiDataLength)) {
+			if (dmalen0 > (devpriv->ui_AiDataLength))
 				dmalen0 = devpriv->ui_AiDataLength;
-			}
-			if (dmalen1 > (devpriv->ui_AiDataLength)) {
+			if (dmalen1 > (devpriv->ui_AiDataLength))
 				dmalen1 = devpriv->ui_AiDataLength;
-			}
 		}
 		devpriv->ui_DmaBufferUsesize[0] = dmalen0;
 		devpriv->ui_DmaBufferUsesize[1] = dmalen1;
@@ -1356,11 +1342,10 @@ int i_APCI3120_SetupChannelList(struct comedi_device *dev, struct comedi_subdevi
 		/*  store range list to card */
 		us_TmpValue = CR_CHAN(chanlist[i]);	/*  get channel number; */
 
-		if (CR_RANGE(chanlist[i]) < APCI3120_BIPOLAR_RANGES) {
+		if (CR_RANGE(chanlist[i]) < APCI3120_BIPOLAR_RANGES)
 			us_TmpValue &= ((~APCI3120_UNIPOLAR) & 0xff);	/*  set bipolar */
-		} else {
+		else
 			us_TmpValue |= APCI3120_UNIPOLAR;	/*  enable unipolar...... */
-		}
 
 		gain = CR_RANGE(chanlist[i]);	/*  get gain number */
 		us_TmpValue |= ((gain & 0x03) << 4);	/* <<4 for G0 and G1 bit in RAM */
@@ -1514,8 +1499,7 @@ void v_APCI3120_Interrupt(int irq, void *d)
 	/*  Check If EOS interrupt */
 	if ((int_daq & 0x2) && (devpriv->b_InterruptMode == APCI3120_EOS_MODE)) {
 
-		if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE)	/*  enable this in without DMA ??? */
-		{
+		if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) {	/*  enable this in without DMA ??? */
 
 			if (devpriv->b_AiCyclicAcquisition == APCI3120_ENABLE) {
 				ui_Check = 0;
@@ -1966,8 +1950,7 @@ int i_APCI3120_InsnConfigTimer(struct comedi_device *dev, struct comedi_subdevic
 		APCI3120_DISABLE_EOS_INT;
 	outb(devpriv->b_ModeSelectRegister,
 		devpriv->iobase + APCI3120_WRITE_MODE_SELECT);
-	if (data[0] == APCI3120_TIMER)	/* initialize timer */
-	{
+	if (data[0] == APCI3120_TIMER) {	/* initialize timer */
 		/* devpriv->b_ModeSelectRegister=devpriv->b_ModeSelectRegister |
 		 * APCI3120_ENABLE_TIMER_INT; */
 
@@ -2006,8 +1989,7 @@ int i_APCI3120_InsnConfigTimer(struct comedi_device *dev, struct comedi_subdevic
 		/*  timer2 in Timer mode enabled */
 		devpriv->b_Timer2Mode = APCI3120_TIMER;
 
-	} else			/*  Initialize Watch dog */
-	{
+	} else {			/*  Initialize Watch dog */
 
 		/* Set the Timer 2 in mode 5(Watchdog) */
 
@@ -2092,8 +2074,7 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device *dev, struct comedi_subdevice
 		return -EINVAL;
 	}
 
-	if (data[0] == 2)	/*  write new value */
-	{
+	if (data[0] == 2) {	/*  write new value */
 		if (devpriv->b_Timer2Mode != APCI3120_TIMER) {
 			comedi_error(dev,
 				"write :timer2  not configured  in TIMER MODE");
@@ -2113,13 +2094,11 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device *dev, struct comedi_subdevice
 
 		/*  Reset FC_TIMER BIT */
 		inb(devpriv->iobase + APCI3120_TIMER_STATUS_REGISTER);
-		if (devpriv->b_Timer2Mode == APCI3120_TIMER)	/* start timer */
-		{
+		if (devpriv->b_Timer2Mode == APCI3120_TIMER) {	/* start timer */
 			/* Enable Timer */
 			devpriv->b_ModeSelectRegister =
 				devpriv->b_ModeSelectRegister & 0x0B;
-		} else		/* start watch dog */
-		{
+		} else {		/* start watch dog */
 			/* Enable WatchDog */
 			devpriv->b_ModeSelectRegister =
 				(devpriv->
@@ -2146,8 +2125,7 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device *dev, struct comedi_subdevice
 		outb(devpriv->b_ModeSelectRegister,
 			devpriv->iobase + APCI3120_WRITE_MODE_SELECT);
 
-		if (devpriv->b_Timer2Mode == APCI3120_TIMER)	/* start timer */
-		{
+		if (devpriv->b_Timer2Mode == APCI3120_TIMER) {	/* start timer */
 			/* For Timer mode is  Gate2 must be activated   **timer started */
 			devpriv->us_OutputRegister =
 				devpriv->
@@ -2299,8 +2277,7 @@ int i_APCI3120_InsnReadTimer(struct comedi_device *dev, struct comedi_subdevice
 		/*  combining both words */
 		data[0] = (unsigned int) ((us_TmpValue) | ((us_TmpValue_2) << 16));
 
-	} else			/*  Read watch dog status */
-	{
+	} else {			/*  Read watch dog status */
 
 		us_StatusValue = inw(devpriv->iobase + APCI3120_RD_STATUS);
 		us_StatusValue =
@@ -2441,10 +2418,9 @@ int i_APCI3120_InsnConfigDigitalOutput(struct comedi_device *dev,
 		devpriv->b_OutputMemoryStatus = APCI3120_DISABLE;
 		devpriv->b_DigitalOutputRegister = 0;
 	}
-	if (!devpriv->b_OutputMemoryStatus) {
+	if (!devpriv->b_OutputMemoryStatus)
 		ui_Temp = 0;
-
-	}			/* if(!devpriv->b_OutputMemoryStatus ) */
+				/* if(!devpriv->b_OutputMemoryStatus ) */
 
 	return insn->n;
 }
@@ -2504,23 +2480,23 @@ int i_APCI3120_InsnBitsDigitalOutput(struct comedi_device *dev,
 
 /*
 +----------------------------------------------------------------------------+
-| Function name     :int i_APCI3120_InsnWriteDigitalOutput(struct comedi_device *dev,|
-|struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) 			             |
-|                                            						         |
+| Function name		:int i_APCI3120_InsnWriteDigitalOutput(struct comedi_device *dev,|
+|struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)	|
+|										|
 +----------------------------------------------------------------------------+
-| Task              : Write digiatl output								     |
-|                     										                 |
+| Task			: Write digiatl output					|
+| 										|
 +----------------------------------------------------------------------------+
-| Input Parameters  : struct comedi_device *dev								 	 |
-|                     struct comedi_subdevice *s									 |
-|                     struct comedi_insn *insn                                      |
-|                     unsigned int *data 										 |
-                      data[0]     Value to be written
-                      data[1]    :1 Set digital o/p ON
-                      data[1]     2 Set digital o/p OFF with memory ON
+| Input Parameters	: struct comedi_device *dev				|
+|			struct comedi_subdevice *s			 	|
+|			struct comedi_insn *insn				|
+|			unsigned int *data					|
+			data[0]     Value to be written
+			data[1]    :1 Set digital o/p ON
+			data[1]     2 Set digital o/p OFF with memory ON
 +----------------------------------------------------------------------------+
-| Return Value      :              					                         |
-|                    													     |
+| Return Value		:							|
+|										|
 +----------------------------------------------------------------------------+
 */
 
@@ -2615,8 +2591,7 @@ int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
 	ui_Channel = CR_CHAN(insn->chanspec);
 
 	/* this_board->i_hwdrv_InsnWriteAnalogOutput(dev, ui_Range, ui_Channel,data[0]); */
-	if (ui_Range)		/*  if 1 then unipolar */
-	{
+	if (ui_Range) {		/*  if 1 then unipolar */
 
 		if (data[0] != 0)
 			data[0] =
@@ -2627,8 +2602,7 @@ int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
 				((((ui_Channel & 0x03) << 14) & 0xC000) | (1 <<
 					13) | 8192);
 
-	} else			/*  if 0 then   bipolar */
-	{
+	} else {			/*  if 0 then   bipolar */
 		data[0] =
 			((((ui_Channel & 0x03) << 14) & 0xC000) | (0 << 13) |
 			data[0]);
@@ -2639,8 +2613,7 @@ int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
  * out put n values at the given channel. printk("\nwaiting for
  * DA_READY BIT");
  */
-	do			/* Waiting of DA_READY BIT */
-	{
+	do {			/* Waiting of DA_READY BIT */
 		us_TmpValue =
 			((unsigned short) inw(devpriv->iobase +
 				APCI3120_RD_STATUS)) & 0x0001;