Merge tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Add support to enable/disable the thermal zones resulting on core
   code and drivers cleanup (Andrzej Pietrasiewicz)

 - Add generic netlink support for userspace notifications: events,
   temperature and discovery commands (Daniel Lezcano)

 - Fix redundant initialization for a ret variable (Colin Ian King)

 - Remove the clock cooling code as it is used nowhere (Amit Kucheria)

 - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian
   Rotariu)

 - Replace all references to thermal.txt in the documentation to the
   corresponding yaml files (Amit Kucheria)

 - Add maintainer entry for the IPA (Lukasz Luba)

 - Add support for MSM8939 for the tsens (Shawn Guo)

 - Update power allocator and devfreq cooling to SPDX licensing (Lukasz
   Luba)

 - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)

 - Add tsensor support for V2 mediatek thermal system (Henry Yen)

 - Fix thermal zone lookup by ID for the core code (Thierry Reding)

* tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits)
  thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support
  thermal: mediatek: Add tsensor support for V2 thermal system
  thermal: mediatek: Prepare to add support for other platforms
  thermal: Update power allocator and devfreq cooling to SPDX licensing
  MAINTAINERS: update entry to thermal governors file name prefixing
  thermal: core: Add thermal zone enable/disable notification
  thermal: qcom: tsens-v0_1: Add support for MSM8939
  dt-bindings: tsens: qcom: Document MSM8939 compatible
  thermal: core: Fix thermal zone lookup by ID
  thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id
  thermal: imx8mm: Support module autoloading
  thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()
  MAINTAINERS: Add maintenance information for IPA
  thermal: rcar_gen3_thermal: Do not shadow thcode variable
  dt-bindings: thermal: Get rid of thermal.txt and replace references
  thermal: core: Move initialization after core initcall
  thermal: netlink: Improve the initcall ordering
  net: genetlink: Move initialization to core_initcall
  thermal: rcar_gen3_thermal: Add r8a774e1 support
  thermal/drivers/clock_cooling: Remove clock_cooling code
  ...

37 files changed, 1424 insertions, 738 deletions

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 3eb2348e5242..13991d68c844 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -17,6 +17,16 @@ menuconfig THERMAL
 
 if THERMAL
 
+config THERMAL_NETLINK
+	bool "Thermal netlink management"
+	depends on NET
+	default y
+	help
+	  The thermal framework has a netlink interface to do thermal
+	  zones discovery, temperature readings and events such as
+	  trip point crossed, cooling device update or governor
+	  change. It is recommended to enable the feature.
+
 config THERMAL_STATISTICS
 	bool "Thermal state transition statistics"
 	help
@@ -180,16 +190,6 @@ config CPU_IDLE_THERMAL
 	  idle cycle.
 endif
 
-config CLOCK_THERMAL
-	bool "Generic clock cooling support"
-	depends on COMMON_CLK
-	depends on PM_OPP
-	help
-	  This entry implements the generic clock cooling mechanism through
-	  frequency clipping. Typically used to cool off co-processors. The
-	  device that is configured to use this cooling mechanism will be
-	  controlled to reduce clock frequency whenever temperature is high.
-
 config DEVFREQ_THERMAL
 	bool "Generic device cooling support"
 	depends on PM_DEVFREQ
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 0c8b84a09b9a..b8d96d26f9ec 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -7,6 +7,9 @@ obj-$(CONFIG_THERMAL)		+= thermal_sys.o
 thermal_sys-y			+= thermal_core.o thermal_sysfs.o \
 					thermal_helpers.o
 
+# netlink interface to manage the thermal framework
+thermal_sys-$(CONFIG_THERMAL_NETLINK)		+= thermal_netlink.o
+
 # interface to/from other layers providing sensors
 thermal_sys-$(CONFIG_THERMAL_HWMON)		+= thermal_hwmon.o
 thermal_sys-$(CONFIG_THERMAL_OF)		+= thermal_of.o
@@ -22,9 +25,6 @@ thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR)	+= gov_power_allocator.o
 thermal_sys-$(CONFIG_CPU_FREQ_THERMAL)	+= cpufreq_cooling.o
 thermal_sys-$(CONFIG_CPU_IDLE_THERMAL)	+= cpuidle_cooling.o
 
-# clock cooling
-thermal_sys-$(CONFIG_CLOCK_THERMAL)	+= clock_cooling.o
-
 # devfreq cooling
 thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
 
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 7c447cd149e7..c2ebfb5be4b3 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -874,6 +874,12 @@ static int armada_thermal_probe(struct platform_device *pdev)
 			return PTR_ERR(tz);
 		}
 
+		ret = thermal_zone_device_enable(tz);
+		if (ret) {
+			thermal_zone_device_unregister(tz);
+			return ret;
+		}
+
 		drvdata->type = LEGACY;
 		drvdata->data.tz = tz;
 		platform_set_drvdata(pdev, drvdata);
diff --git a/drivers/thermal/clock_cooling.c b/drivers/thermal/clock_cooling.c
deleted file mode 100644
index 56cb1f46a428..000000000000
--- a/drivers/thermal/clock_cooling.c
+++ /dev/null
@@ -1,445 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  drivers/thermal/clock_cooling.c
- *
- *  Copyright (C) 2014 Eduardo Valentin <edubezval@gmail.com>
- *
- *  Copyright (C) 2013	Texas Instruments Inc.
- *  Contact:  Eduardo Valentin <eduardo.valentin@ti.com>
- *
- *  Highly based on cpufreq_cooling.c.
- *  Copyright (C) 2012	Samsung Electronics Co., Ltd(http://www.samsung.com)
- *  Copyright (C) 2012  Amit Daniel <amit.kachhap@linaro.org>
- */
-#include <linux/clk.h>
-#include <linux/clock_cooling.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/export.h>
-#include <linux/idr.h>
-#include <linux/mutex.h>
-#include <linux/pm_opp.h>
-#include <linux/slab.h>
-#include <linux/thermal.h>
-
-/**
- * struct clock_cooling_device - data for cooling device with clock
- * @id: unique integer value corresponding to each clock_cooling_device
- *	registered.
- * @dev: struct device pointer to the device being used to cool off using
- *       clock frequencies.
- * @cdev: thermal_cooling_device pointer to keep track of the
- *	registered cooling device.
- * @clk_rate_change_nb: reference to notifier block used to receive clock
- *                      rate changes.
- * @freq_table: frequency table used to keep track of available frequencies.
- * @clock_state: integer value representing the current state of clock
- *	cooling	devices.
- * @clock_val: integer value representing the absolute value of the clipped
- *	frequency.
- * @clk: struct clk reference used to enforce clock limits.
- * @lock: mutex lock to protect this struct.
- *
- * This structure is required for keeping information of each
- * clock_cooling_device registered. In order to prevent corruption of this a
- * mutex @lock is used.
- */
-struct clock_cooling_device {
-	int id;
-	struct device *dev;
-	struct thermal_cooling_device *cdev;
-	struct notifier_block clk_rate_change_nb;
-	struct cpufreq_frequency_table *freq_table;
-	unsigned long clock_state;
-	unsigned long clock_val;
-	struct clk *clk;
-	struct mutex lock; /* lock to protect the content of this struct */
-};
-#define to_clock_cooling_device(x) \
-		container_of(x, struct clock_cooling_device, clk_rate_change_nb)
-static DEFINE_IDA(clock_ida);
-
-/* Below code defines functions to be used for clock as cooling device */
-
-enum clock_cooling_property {
-	GET_LEVEL,
-	GET_FREQ,
-	GET_MAXL,
-};
-
-/**
- * clock_cooling_get_property - fetch a property of interest for a give cpu.
- * @ccdev: clock cooling device reference
- * @input: query parameter
- * @output: query return
- * @property: type of query (frequency, level, max level)
- *
- * This is the common function to
- * 1. get maximum clock cooling states
- * 2. translate frequency to cooling state
- * 3. translate cooling state to frequency
- * Note that the code may be not in good shape
- * but it is written in this way in order to:
- * a) reduce duplicate code as most of the code can be shared.
- * b) make sure the logic is consistent when translating between
- *    cooling states and frequencies.
- *
- * Return: 0 on success, -EINVAL when invalid parameters are passed.
- */
-static int clock_cooling_get_property(struct clock_cooling_device *ccdev,
-				      unsigned long input,
-				      unsigned long *output,
-				      enum clock_cooling_property property)
-{
-	int i;
-	unsigned long max_level = 0, level = 0;
-	unsigned int freq = CPUFREQ_ENTRY_INVALID;
-	int descend = -1;
-	struct cpufreq_frequency_table *pos, *table = ccdev->freq_table;
-
-	if (!output)
-		return -EINVAL;
-
-	if (!table)
-		return -EINVAL;
-
-	cpufreq_for_each_valid_entry(pos, table) {
-		/* ignore duplicate entry */
-		if (freq == pos->frequency)
-			continue;
-
-		/* get the frequency order */
-		if (freq != CPUFREQ_ENTRY_INVALID && descend == -1)
-			descend = freq > pos->frequency;
-
-		freq = pos->frequency;
-		max_level++;
-	}
-
-	/* No valid cpu frequency entry */
-	if (max_level == 0)
-		return -EINVAL;
-
-	/* max_level is an index, not a counter */
-	max_level--;
-
-	/* get max level */
-	if (property == GET_MAXL) {
-		*output = max_level;
-		return 0;
-	}
-
-	if (property == GET_FREQ)
-		level = descend ? input : (max_level - input);
-
-	i = 0;
-	cpufreq_for_each_valid_entry(pos, table) {
-		/* ignore duplicate entry */
-		if (freq == pos->frequency)
-			continue;
-
-		/* now we have a valid frequency entry */
-		freq = pos->frequency;
-
-		if (property == GET_LEVEL && (unsigned int)input == freq) {
-			/* get level by frequency */
-			*output = descend ? i : (max_level - i);
-			return 0;
-		}
-		if (property == GET_FREQ && level == i) {
-			/* get frequency by level */
-			*output = freq;
-			return 0;
-		}
-		i++;
-	}
-
-	return -EINVAL;
-}
-
-/**
- * clock_cooling_get_level - return the cooling level of given clock cooling.
- * @cdev: reference of a thermal cooling device of used as clock cooling device
- * @freq: the frequency of interest
- *
- * This function will match the cooling level corresponding to the
- * requested @freq and return it.
- *
- * Return: The matched cooling level on success or THERMAL_CSTATE_INVALID
- * otherwise.
- */
-unsigned long clock_cooling_get_level(struct thermal_cooling_device *cdev,
-				      unsigned long freq)
-{
-	struct clock_cooling_device *ccdev = cdev->devdata;
-	unsigned long val;
-
-	if (clock_cooling_get_property(ccdev, (unsigned long)freq, &val,
-				       GET_LEVEL))
-		return THERMAL_CSTATE_INVALID;
-
-	return val;
-}
-EXPORT_SYMBOL_GPL(clock_cooling_get_level);
-
-/**
- * clock_cooling_get_frequency - get the absolute value of frequency from level.
- * @ccdev: clock cooling device reference
- * @level: cooling level
- *
- * This function matches cooling level with frequency. Based on a cooling level
- * of frequency, equals cooling state of cpu cooling device, it will return
- * the corresponding frequency.
- *	e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc
- *
- * Return: 0 on error, the corresponding frequency otherwise.
- */
-static unsigned long
-clock_cooling_get_frequency(struct clock_cooling_device *ccdev,
-			    unsigned long level)
-{
-	int ret = 0;
-	unsigned long freq;
-
-	ret = clock_cooling_get_property(ccdev, level, &freq, GET_FREQ);
-	if (ret)
-		return 0;
-
-	return freq;
-}
-
-/**
- * clock_cooling_apply - function to apply frequency clipping.
- * @ccdev: clock_cooling_device pointer containing frequency clipping data.
- * @cooling_state: value of the cooling state.
- *
- * Function used to make sure the clock layer is aware of current thermal
- * limits. The limits are applied by updating the clock rate in case it is
- * higher than the corresponding frequency based on the requested cooling_state.
- *
- * Return: 0 on success, an error code otherwise (-EINVAL in case wrong
- * cooling state).
- */
-static int clock_cooling_apply(struct clock_cooling_device *ccdev,
-			       unsigned long cooling_state)
-{
-	unsigned long clip_freq, cur_freq;
-	int ret = 0;
-
-	/* Here we write the clipping */
-	/* Check if the old cooling action is same as new cooling action */
-	if (ccdev->clock_state == cooling_state)
-		return 0;
-
-	clip_freq = clock_cooling_get_frequency(ccdev, cooling_state);
-	if (!clip_freq)
-		return -EINVAL;
-
-	cur_freq = clk_get_rate(ccdev->clk);
-
-	mutex_lock(&ccdev->lock);
-	ccdev->clock_state = cooling_state;
-	ccdev->clock_val = clip_freq;
-	/* enforce clock level */
-	if (cur_freq > clip_freq)
-		ret = clk_set_rate(ccdev->clk, clip_freq);
-	mutex_unlock(&ccdev->lock);
-
-	return ret;
-}
-
-/**
- * clock_cooling_clock_notifier - notifier callback on clock rate changes.
- * @nb:	struct notifier_block * with callback info.
- * @event: value showing clock event for which this function invoked.
- * @data: callback-specific data
- *
- * Callback to hijack the notification on clock transition.
- * Every time there is a clock change, we intercept all pre change events
- * and block the transition in case the new rate infringes thermal limits.
- *
- * Return: NOTIFY_DONE (success) or NOTIFY_BAD (new_rate > thermal limit).
- */
-static int clock_cooling_clock_notifier(struct notifier_block *nb,
-					unsigned long event, void *data)
-{
-	struct clk_notifier_data *ndata = data;
-	struct clock_cooling_device *ccdev = to_clock_cooling_device(nb);
-
-	switch (event) {
-	case PRE_RATE_CHANGE:
-		/*
-		 * checks on current state
-		 * TODO: current method is not best we can find as it
-		 * allows possibly voltage transitions, in case DVFS
-		 * layer is also hijacking clock pre notifications.
-		 */
-		if (ndata->new_rate > ccdev->clock_val)
-			return NOTIFY_BAD;
-		/* fall through */
-	case POST_RATE_CHANGE:
-	case ABORT_RATE_CHANGE:
-	default:
-		return NOTIFY_DONE;
-	}
-}
-
-/* clock cooling device thermal callback functions are defined below */
-
-/**
- * clock_cooling_get_max_state - callback function to get the max cooling state.
- * @cdev: thermal cooling device pointer.
- * @state: fill this variable with the max cooling state.
- *
- * Callback for the thermal cooling device to return the clock
- * max cooling state.
- *
- * Return: 0 on success, an error code otherwise.
- */
-static int clock_cooling_get_max_state(struct thermal_cooling_device *cdev,
-				       unsigned long *state)
-{
-	struct clock_cooling_device *ccdev = cdev->devdata;
-	unsigned long count = 0;
-	int ret;
-
-	ret = clock_cooling_get_property(ccdev, 0, &count, GET_MAXL);
-	if (!ret)
-		*state = count;
-
-	return ret;
-}
-
-/**
- * clock_cooling_get_cur_state - function to get the current cooling state.
- * @cdev: thermal cooling device pointer.
- * @state: fill this variable with the current cooling state.
- *
- * Callback for the thermal cooling device to return the clock
- * current cooling state.
- *
- * Return: 0 (success)
- */
-static int clock_cooling_get_cur_state(struct thermal_cooling_device *cdev,
-				       unsigned long *state)
-{
-	struct clock_cooling_device *ccdev = cdev->devdata;
-
-	*state = ccdev->clock_state;
-
-	return 0;
-}
-
-/**
- * clock_cooling_set_cur_state - function to set the current cooling state.
- * @cdev: thermal cooling device pointer.
- * @state: set this variable to the current cooling state.
- *
- * Callback for the thermal cooling device to change the clock cooling
- * current cooling state.
- *
- * Return: 0 on success, an error code otherwise.
- */
-static int clock_cooling_set_cur_state(struct thermal_cooling_device *cdev,
-				       unsigned long state)
-{
-	struct clock_cooling_device *clock_device = cdev->devdata;
-
-	return clock_cooling_apply(clock_device, state);
-}
-
-/* Bind clock callbacks to thermal cooling device ops */
-static struct thermal_cooling_device_ops const clock_cooling_ops = {
-	.get_max_state = clock_cooling_get_max_state,
-	.get_cur_state = clock_cooling_get_cur_state,
-	.set_cur_state = clock_cooling_set_cur_state,
-};
-
-/**
- * clock_cooling_register - function to create clock cooling device.
- * @dev: struct device pointer to the device used as clock cooling device.
- * @clock_name: string containing the clock used as cooling mechanism.
- *
- * This interface function registers the clock cooling device with the name
- * "thermal-clock-%x". The cooling device is based on clock frequencies.
- * The struct device is assumed to be capable of DVFS transitions.
- * The OPP layer is used to fetch and fill the available frequencies for
- * the referred device. The ordered frequency table is used to control
- * the clock cooling device cooling states and to limit clock transitions
- * based on the cooling state requested by the thermal framework.
- *
- * Return: a valid struct thermal_cooling_device pointer on success,
- * on failure, it returns a corresponding ERR_PTR().
- */
-struct thermal_cooling_device *
-clock_cooling_register(struct device *dev, const char *clock_name)
-{
-	struct thermal_cooling_device *cdev;
-	struct clock_cooling_device *ccdev = NULL;
-	char dev_name[THERMAL_NAME_LENGTH];
-	int ret = 0;
-
-	ccdev = devm_kzalloc(dev, sizeof(*ccdev), GFP_KERNEL);
-	if (!ccdev)
-		return ERR_PTR(-ENOMEM);
-
-	mutex_init(&ccdev->lock);
-	ccdev->dev = dev;
-	ccdev->clk = devm_clk_get(dev, clock_name);
-	if (IS_ERR(ccdev->clk))
-		return ERR_CAST(ccdev->clk);
-
-	ret = ida_simple_get(&clock_ida, 0, 0, GFP_KERNEL);
-	if (ret < 0)
-		return ERR_PTR(ret);
-	ccdev->id = ret;
-
-	snprintf(dev_name, sizeof(dev_name), "thermal-clock-%d", ccdev->id);
-
-	cdev = thermal_cooling_device_register(dev_name, ccdev,
-					       &clock_cooling_ops);
-	if (IS_ERR(cdev)) {
-		ida_simple_remove(&clock_ida, ccdev->id);
-		return ERR_PTR(-EINVAL);
-	}
-	ccdev->cdev = cdev;
-	ccdev->clk_rate_change_nb.notifier_call = clock_cooling_clock_notifier;
-
-	/* Assuming someone has already filled the opp table for this device */
-	ret = dev_pm_opp_init_cpufreq_table(dev, &ccdev->freq_table);
-	if (ret) {
-		ida_simple_remove(&clock_ida, ccdev->id);
-		return ERR_PTR(ret);
-	}
-	ccdev->clock_state = 0;
-	ccdev->clock_val = clock_cooling_get_frequency(ccdev, 0);
-
-	clk_notifier_register(ccdev->clk, &ccdev->clk_rate_change_nb);
-
-	return cdev;
-}
-EXPORT_SYMBOL_GPL(clock_cooling_register);
-
-/**
- * clock_cooling_unregister - function to remove clock cooling device.
- * @cdev: thermal cooling device pointer.
- *
- * This interface function unregisters the "thermal-clock-%x" cooling device.
- */
-void clock_cooling_unregister(struct thermal_cooling_device *cdev)
-{
-	struct clock_cooling_device *ccdev;
-
-	if (!cdev)
-		return;
-
-	ccdev = cdev->devdata;
-
-	clk_notifier_unregister(ccdev->clk, &ccdev->clk_rate_change_nb);
-	dev_pm_opp_free_cpufreq_table(ccdev->dev, &ccdev->freq_table);
-
-	thermal_cooling_device_unregister(ccdev->cdev);
-	ida_simple_remove(&clock_ida, ccdev->id);
-}
-EXPORT_SYMBOL_GPL(clock_cooling_unregister);
diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
index c32709badeda..4d74994f160a 100644
--- a/drivers/thermal/da9062-thermal.c
+++ b/drivers/thermal/da9062-thermal.c
@@ -49,7 +49,6 @@ struct da9062_thermal {
 	struct da9062 *hw;
 	struct delayed_work work;
 	struct thermal_zone_device *zone;
-	enum thermal_device_mode mode;
 	struct mutex lock; /* protection for da9062_thermal temperature */
 	int temperature;
 	int irq;
@@ -121,14 +120,6 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int da9062_thermal_get_mode(struct thermal_zone_device *z,
-				   enum thermal_device_mode *mode)
-{
-	struct da9062_thermal *thermal = z->devdata;
-	*mode = thermal->mode;
-	return 0;
-}
-
 static int da9062_thermal_get_trip_type(struct thermal_zone_device *z,
 					int trip,
 					enum thermal_trip_type *type)
@@ -181,7 +172,6 @@ static int da9062_thermal_get_temp(struct thermal_zone_device *z,
 
 static struct thermal_zone_device_ops da9062_thermal_ops = {
 	.get_temp	= da9062_thermal_get_temp,
-	.get_mode	= da9062_thermal_get_mode,
 	.get_trip_type	= da9062_thermal_get_trip_type,
 	.get_trip_temp	= da9062_thermal_get_trip_temp,
 };
@@ -233,7 +223,6 @@ static int da9062_thermal_probe(struct platform_device *pdev)
 
 	thermal->config = match->data;
 	thermal->hw = chip;
-	thermal->mode = THERMAL_DEVICE_ENABLED;
 	thermal->dev = &pdev->dev;
 
 	INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
@@ -248,6 +237,11 @@ static int da9062_thermal_probe(struct platform_device *pdev)
 		ret = PTR_ERR(thermal->zone);
 		goto err;
 	}
+	ret = thermal_zone_device_enable(thermal->zone);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot enable thermal zone device\n");
+		goto err_zone;
+	}
 
 	dev_dbg(&pdev->dev,
 		"TJUNC temperature polling period set at %d ms\n",
diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
index f7f32e98331b..a12d29096229 100644
--- a/drivers/thermal/devfreq_cooling.c
+++ b/drivers/thermal/devfreq_cooling.c
@@ -1,18 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * devfreq_cooling: Thermal cooling device implementation for devices using
  *                  devfreq
  *
  * Copyright (C) 2014-2015 ARM Limited
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * TODO:
  *    - If OPPs are added or removed after devfreq cooling has
  *      registered, the devfreq cooling won't react to it.
diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c
index 75901ced4a62..73182eb94bc0 100644
--- a/drivers/thermal/dove_thermal.c
+++ b/drivers/thermal/dove_thermal.c
@@ -153,6 +153,12 @@ static int dove_thermal_probe(struct platform_device *pdev)
 		return PTR_ERR(thermal);
 	}
 
+	ret = thermal_zone_device_enable(thermal);
+	if (ret) {
+		thermal_zone_device_unregister(thermal);
+		return ret;
+	}
+
 	platform_set_drvdata(pdev, thermal);
 
 	return 0;
diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 44636475b2a3..5cb518d8f156 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -1,16 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * A power allocator to manage temperature
  *
  * Copyright (C) 2014 ARM Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 #define pr_fmt(fmt) "Power allocator: " fmt
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index 2d26ae80e202..ee05950afd2f 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -549,8 +549,10 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
 {
 	struct thermal_zone_device *tzd = sensor->tzd;
 
-	tzd->ops->set_mode(tzd,
-		on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
+	if (on)
+		thermal_zone_device_enable(tzd);
+	else
+		thermal_zone_device_disable(tzd);
 }
 
 static int hisi_thermal_probe(struct platform_device *pdev)
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index e6061e26d4ac..f5124f14cf81 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -220,6 +220,7 @@ static const struct of_device_id imx8mm_tmu_table[] = {
 	{ .compatible = "fsl,imx8mp-tmu", .data = &imx8mp_tmu_data, },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, imx8mm_tmu_table);
 
 static struct platform_driver imx8mm_tmu = {
 	.driver = {
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 1b84ea674edb..3f74ab4c1ab9 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -197,7 +197,6 @@ struct imx_thermal_data {
 	struct cpufreq_policy *policy;
 	struct thermal_zone_device *tz;
 	struct thermal_cooling_device *cdev;
-	enum thermal_device_mode mode;
 	struct regmap *tempmon;
 	u32 c1, c2; /* See formula in imx_init_calib() */
 	int temp_passive;
@@ -253,10 +252,11 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 	const struct thermal_soc_data *soc_data = data->socdata;
 	struct regmap *map = data->tempmon;
 	unsigned int n_meas;
-	bool wait;
+	bool wait, run_measurement;
 	u32 val;
 
-	if (data->mode == THERMAL_DEVICE_ENABLED) {
+	run_measurement = !data->irq_enabled;
+	if (!run_measurement) {
 		/* Check if a measurement is currently in progress */
 		regmap_read(map, soc_data->temp_data, &val);
 		wait = !(val & soc_data->temp_valid_mask);
@@ -283,7 +283,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 
 	regmap_read(map, soc_data->temp_data, &val);
 
-	if (data->mode != THERMAL_DEVICE_ENABLED) {
+	if (run_measurement) {
 		regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
 			     soc_data->measure_temp_mask);
 		regmap_write(map, soc_data->sensor_ctrl + REG_SET,
@@ -331,27 +331,14 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 	return 0;
 }
 
-static int imx_get_mode(struct thermal_zone_device *tz,
-			enum thermal_device_mode *mode)
-{
-	struct imx_thermal_data *data = tz->devdata;
-
-	*mode = data->mode;
-
-	return 0;
-}
-
-static int imx_set_mode(struct thermal_zone_device *tz,
-			enum thermal_device_mode mode)
+static int imx_change_mode(struct thermal_zone_device *tz,
+			   enum thermal_device_mode mode)
 {
 	struct imx_thermal_data *data = tz->devdata;
 	struct regmap *map = data->tempmon;
 	const struct thermal_soc_data *soc_data = data->socdata;
 
 	if (mode == THERMAL_DEVICE_ENABLED) {
-		tz->polling_delay = IMX_POLLING_DELAY;
-		tz->passive_delay = IMX_PASSIVE_DELAY;
-
 		regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
 			     soc_data->power_down_mask);
 		regmap_write(map, soc_data->sensor_ctrl + REG_SET,
@@ -367,18 +354,12 @@ static int imx_set_mode(struct thermal_zone_device *tz,
 		regmap_write(map, soc_data->sensor_ctrl + REG_SET,
 			     soc_data->power_down_mask);
 
-		tz->polling_delay = 0;
-		tz->passive_delay = 0;
-
 		if (data->irq_enabled) {
 			disable_irq(data->irq);
 			data->irq_enabled = false;
 		}
 	}
 
-	data->mode = mode;
-	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-
 	return 0;
 }
 
@@ -467,8 +448,7 @@ static struct thermal_zone_device_ops imx_tz_ops = {
 	.bind = imx_bind,
 	.unbind = imx_unbind,
 	.get_temp = imx_get_temp,
-	.get_mode = imx_get_mode,
-	.set_mode = imx_set_mode,
+	.change_mode = imx_change_mode,
 	.get_trip_type = imx_get_trip_type,
 	.get_trip_temp = imx_get_trip_temp,
 	.get_crit_temp = imx_get_crit_temp,
@@ -832,7 +812,9 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		     data->socdata->measure_temp_mask);
 
 	data->irq_enabled = true;
-	data->mode = THERMAL_DEVICE_ENABLED;
+	ret = thermal_zone_device_enable(data->tz);
+	if (ret)
+		goto thermal_zone_unregister;
 
 	ret = devm_request_threaded_irq(&pdev->dev, data->irq,
 			imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
@@ -874,19 +856,18 @@ static int imx_thermal_remove(struct platform_device *pdev)
 static int __maybe_unused imx_thermal_suspend(struct device *dev)
 {
 	struct imx_thermal_data *data = dev_get_drvdata(dev);
-	struct regmap *map = data->tempmon;
+	int ret;
 
 	/*
 	 * Need to disable thermal sensor, otherwise, when thermal core
 	 * try to get temperature before thermal sensor resume, a wrong
 	 * temperature will be read as the thermal sensor is powered
-	 * down.
+	 * down. This is done in change_mode() operation called from
+	 * thermal_zone_device_disable()
 	 */
-	regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
-		     data->socdata->measure_temp_mask);
-	regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
-		     data->socdata->power_down_mask);
-	data->mode = THERMAL_DEVICE_DISABLED;
+	ret = thermal_zone_device_disable(data->tz);
+	if (ret)
+		return ret;
 	clk_disable_unprepare(data->thermal_clk);
 
 	return 0;
@@ -895,18 +876,15 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev)
 static int __maybe_unused imx_thermal_resume(struct device *dev)
 {
 	struct imx_thermal_data *data = dev_get_drvdata(dev);
-	struct regmap *map = data->tempmon;
 	int ret;
 
 	ret = clk_prepare_enable(data->thermal_clk);
 	if (ret)
 		return ret;
 	/* Enabled thermal sensor after resume */
-	regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
-		     data->socdata->power_down_mask);
-	regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
-		     data->socdata->measure_temp_mask);
-	data->mode = THERMAL_DEVICE_ENABLED;
+	ret = thermal_zone_device_enable(data->tz);
+	if (ret)
+		return ret;
 
 	return 0;
 }
diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
index 12448ccd27f1..4f5859d4c780 100644
--- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
@@ -48,7 +48,6 @@ struct int3400_thermal_priv {
 	struct acpi_device *adev;
 	struct platform_device *pdev;
 	struct thermal_zone_device *thermal;
-	int mode;
 	int art_count;
 	struct art *arts;
 	int trt_count;
@@ -383,42 +382,20 @@ static int int3400_thermal_get_temp(struct thermal_zone_device *thermal,
 	return 0;
 }
 
-static int int3400_thermal_get_mode(struct thermal_zone_device *thermal,
-				enum thermal_device_mode *mode)
+static int int3400_thermal_change_mode(struct thermal_zone_device *thermal,
+				       enum thermal_device_mode mode)
 {
 	struct int3400_thermal_priv *priv = thermal->devdata;
-
-	if (!priv)
-		return -EINVAL;
-
-	*mode = priv->mode;
-
-	return 0;
-}
-
-static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
-				enum thermal_device_mode mode)
-{
-	struct int3400_thermal_priv *priv = thermal->devdata;
-	bool enable;
 	int result = 0;
 
 	if (!priv)
 		return -EINVAL;
 
-	if (mode == THERMAL_DEVICE_ENABLED)
-		enable = true;
-	else if (mode == THERMAL_DEVICE_DISABLED)
-		enable = false;
-	else
-		return -EINVAL;
-
-	if (enable != priv->mode) {
-		priv->mode = enable;
+	if (mode != thermal->mode)
 		result = int3400_thermal_run_osc(priv->adev->handle,
-						 priv->current_uuid_index,
-						 enable);
-	}
+						priv->current_uuid_index,
+						mode == THERMAL_DEVICE_ENABLED);
+
 
 	evaluate_odvp(priv);
 
@@ -427,8 +404,7 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
 
 static struct thermal_zone_device_ops int3400_thermal_ops = {
 	.get_temp = int3400_thermal_get_temp,
-	.get_mode = int3400_thermal_get_mode,
-	.set_mode = int3400_thermal_set_mode,
+	.change_mode = int3400_thermal_change_mode,
 };
 
 static struct thermal_zone_params int3400_thermal_params = {
diff --git a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
index 432213272f1e..6e479deff76b 100644
--- a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
+++ b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
@@ -259,9 +259,14 @@ struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *adev,
 		ret = PTR_ERR(int34x_thermal_zone->zone);
 		goto err_thermal_zone;
 	}
+	ret = thermal_zone_device_enable(int34x_thermal_zone->zone);
+	if (ret)
+		goto err_enable;
 
 	return int34x_thermal_zone;
 
+err_enable:
+	thermal_zone_device_unregister(int34x_thermal_zone->zone);
 err_thermal_zone:
 	acpi_lpat_free_conversion_table(int34x_thermal_zone->lpat_table);
 	kfree(int34x_thermal_zone->aux_trips);
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
index 297db1d2d960..81e8b15ef405 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
@@ -43,7 +43,7 @@
 #define PCI_DEVICE_ID_PROC_ICL_THERMAL	0x8a03
 
 /* JasperLake thermal reporting device */
-#define PCI_DEVICE_ID_PROC_JSL_THERMAL	0x4503
+#define PCI_DEVICE_ID_PROC_JSL_THERMAL	0x4E03
 
 /* TigerLake thermal reporting device */
 #define PCI_DEVICE_ID_PROC_TGL_THERMAL	0x9A03
diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c
index 56401fd4708d..3b813ebb6ca1 100644
--- a/drivers/thermal/intel/intel_pch_thermal.c
+++ b/drivers/thermal/intel/intel_pch_thermal.c
@@ -24,6 +24,7 @@
 #define PCH_THERMAL_DID_SKL_H	0xA131 /* Skylake PCH 100 series */
 #define PCH_THERMAL_DID_CNL	0x9Df9 /* CNL PCH */
 #define PCH_THERMAL_DID_CNL_H	0xA379 /* CNL-H PCH */
+#define PCH_THERMAL_DID_CNL_LP	0x02F9 /* CNL-LP PCH */
 #define PCH_THERMAL_DID_CML_H	0X06F9 /* CML-H PCH */
 
 /* Wildcat Point-LP  PCH Thermal registers */
@@ -352,9 +353,14 @@ static int intel_pch_thermal_probe(struct pci_dev *pdev,
 		err = PTR_ERR(ptd->tzd);
 		goto error_cleanup;
 	}
+	err = thermal_zone_device_enable(ptd->tzd);
+	if (err)
+		goto err_unregister;
 
 	return 0;
 
+err_unregister:
+	thermal_zone_device_unregister(ptd->tzd);
 error_cleanup:
 	iounmap(ptd->hw_base);
 error_release:
@@ -405,6 +411,8 @@ static const struct pci_device_id intel_pch_thermal_id[] = {
 		.driver_data = board_cnl, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_H),
 		.driver_data = board_cnl, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_LP),
+		.driver_data = board_cnl, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CML_H),
 		.driver_data = board_cml, },
 	{ 0, },
diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c
index d704fc104cfd..3eafc6b0e6c3 100644
--- a/drivers/thermal/intel/intel_quark_dts_thermal.c
+++ b/drivers/thermal/intel/intel_quark_dts_thermal.c
@@ -103,7 +103,6 @@ struct soc_sensor_entry {
 	bool locked;
 	u32 store_ptps;
 	u32 store_dts_enable;
-	enum thermal_device_mode mode;
 	struct thermal_zone_device *tzone;
 };
 
@@ -127,10 +126,8 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
 	if (ret)
 		return ret;
 
-	if (out & QRK_DTS_ENABLE_BIT) {
-		aux_entry->mode = THERMAL_DEVICE_ENABLED;
+	if (out & QRK_DTS_ENABLE_BIT)
 		return 0;
-	}
 
 	if (!aux_entry->locked) {
 		out |= QRK_DTS_ENABLE_BIT;
@@ -138,10 +135,7 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
 				     QRK_DTS_REG_OFFSET_ENABLE, out);
 		if (ret)
 			return ret;
-
-		aux_entry->mode = THERMAL_DEVICE_ENABLED;
 	} else {
-		aux_entry->mode = THERMAL_DEVICE_DISABLED;
 		pr_info("DTS is locked. Cannot enable DTS\n");
 		ret = -EPERM;
 	}
@@ -160,10 +154,8 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
 	if (ret)
 		return ret;
 
-	if (!(out & QRK_DTS_ENABLE_BIT)) {
-		aux_entry->mode = THERMAL_DEVICE_DISABLED;
+	if (!(out & QRK_DTS_ENABLE_BIT))
 		return 0;
-	}
 
 	if (!aux_entry->locked) {
 		out &= ~QRK_DTS_ENABLE_BIT;
@@ -172,10 +164,7 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
 
 		if (ret)
 			return ret;
-
-		aux_entry->mode = THERMAL_DEVICE_DISABLED;
 	} else {
-		aux_entry->mode = THERMAL_DEVICE_ENABLED;
 		pr_info("DTS is locked. Cannot disable DTS\n");
 		ret = -EPERM;
 	}
@@ -309,16 +298,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
 	return 0;
 }
 
-static int sys_get_mode(struct thermal_zone_device *tzd,
-				enum thermal_device_mode *mode)
-{
-	struct soc_sensor_entry *aux_entry = tzd->devdata;
-	*mode = aux_entry->mode;
-	return 0;
-}
-
-static int sys_set_mode(struct thermal_zone_device *tzd,
-				enum thermal_device_mode mode)
+static int sys_change_mode(struct thermal_zone_device *tzd,
+			   enum thermal_device_mode mode)
 {
 	int ret;
 
@@ -338,8 +319,7 @@ static struct thermal_zone_device_ops tzone_ops = {
 	.get_trip_type = sys_get_trip_type,
 	.set_trip_temp = sys_set_trip_temp,
 	.get_crit_temp = sys_get_crit_temp,
-	.get_mode = sys_get_mode,
-	.set_mode = sys_set_mode,
+	.change_mode = sys_change_mode,
 };
 
 static void free_soc_dts(struct soc_sensor_entry *aux_entry)
@@ -414,9 +394,7 @@ static struct soc_sensor_entry *alloc_soc_dts(void)
 		goto err_ret;
 	}
 
-	mutex_lock(&dts_update_mutex);
-	err = soc_dts_enable(aux_entry->tzone);
-	mutex_unlock(&dts_update_mutex);
+	err = thermal_zone_device_enable(aux_entry->tzone);
 	if (err)
 		goto err_aux_status;
 
diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c
index f75271b669c6..4f1a2f7c016c 100644
--- a/drivers/thermal/intel/intel_soc_dts_iosf.c
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.c
@@ -329,6 +329,9 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
 		ret = PTR_ERR(dts->tzone);
 		goto err_ret;
 	}
+	ret = thermal_zone_device_enable(dts->tzone);
+	if (ret)
+		goto err_enable;
 
 	ret = soc_dts_enable(id);
 	if (ret)
diff --git a/drivers/thermal/intel/x86_pkg_temp_thermal.c b/drivers/thermal/intel/x86_pkg_temp_thermal.c
index a006b9fd1d72..b81c33202f41 100644
--- a/drivers/thermal/intel/x86_pkg_temp_thermal.c
+++ b/drivers/thermal/intel/x86_pkg_temp_thermal.c
@@ -363,6 +363,12 @@ static int pkg_temp_thermal_device_add(unsigned int cpu)
 		kfree(zonedev);
 		return err;
 	}
+	err = thermal_zone_device_enable(zonedev->tzone);
+	if (err) {
+		thermal_zone_device_unregister(zonedev->tzone);
+		kfree(zonedev);
+		return err;
+	}
 	/* Store MSR value for package thermal interrupt, to restore at exit */
 	rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, zonedev->msr_pkg_therm_low,
 	      zonedev->msr_pkg_therm_high);
diff --git a/drivers/thermal/kirkwood_thermal.c b/drivers/thermal/kirkwood_thermal.c
index 189b675cf14d..7fb6e476c82a 100644
--- a/drivers/thermal/kirkwood_thermal.c
+++ b/drivers/thermal/kirkwood_thermal.c
@@ -65,6 +65,7 @@ static int kirkwood_thermal_probe(struct platform_device *pdev)
 	struct thermal_zone_device *thermal = NULL;
 	struct kirkwood_thermal_priv *priv;
 	struct resource *res;
+	int ret;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -82,6 +83,12 @@ static int kirkwood_thermal_probe(struct platform_device *pdev)
 			"Failed to register thermal zone device\n");
 		return PTR_ERR(thermal);
 	}
+	ret = thermal_zone_device_enable(thermal);
+	if (ret) {
+		thermal_zone_device_unregister(thermal);
+		dev_err(&pdev->dev, "Failed to enable thermal zone device\n");
+		return ret;
+	}
 
 	platform_set_drvdata(pdev, thermal);
 
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 42c9cd0e5f77..0bd7aa564bc2 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -38,6 +38,7 @@
 #define TEMP_MONIDET0		0x014
 #define TEMP_MONIDET1		0x018
 #define TEMP_MSRCTL0		0x038
+#define TEMP_MSRCTL1		0x03c
 #define TEMP_AHBPOLL		0x040
 #define TEMP_AHBTO		0x044
 #define TEMP_ADCPNP0		0x048
@@ -120,18 +121,32 @@
  * MT2701 has 3 sensors and needs 3 VTS calibration data.
  * MT2712 has 4 sensors and needs 4 VTS calibration data.
  */
-#define CALIB_BUF0_VALID		BIT(0)
-#define CALIB_BUF1_ADC_GE(x)		(((x) >> 22) & 0x3ff)
-#define CALIB_BUF0_VTS_TS1(x)		(((x) >> 17) & 0x1ff)
-#define CALIB_BUF0_VTS_TS2(x)		(((x) >> 8) & 0x1ff)
-#define CALIB_BUF1_VTS_TS3(x)		(((x) >> 0) & 0x1ff)
-#define CALIB_BUF2_VTS_TS4(x)		(((x) >> 23) & 0x1ff)
-#define CALIB_BUF2_VTS_TS5(x)		(((x) >> 5) & 0x1ff)
-#define CALIB_BUF2_VTS_TSABB(x)		(((x) >> 14) & 0x1ff)
-#define CALIB_BUF0_DEGC_CALI(x)		(((x) >> 1) & 0x3f)
-#define CALIB_BUF0_O_SLOPE(x)		(((x) >> 26) & 0x3f)
-#define CALIB_BUF0_O_SLOPE_SIGN(x)	(((x) >> 7) & 0x1)
-#define CALIB_BUF1_ID(x)		(((x) >> 9) & 0x1)
+#define CALIB_BUF0_VALID_V1		BIT(0)
+#define CALIB_BUF1_ADC_GE_V1(x)		(((x) >> 22) & 0x3ff)
+#define CALIB_BUF0_VTS_TS1_V1(x)	(((x) >> 17) & 0x1ff)
+#define CALIB_BUF0_VTS_TS2_V1(x)	(((x) >> 8) & 0x1ff)
+#define CALIB_BUF1_VTS_TS3_V1(x)	(((x) >> 0) & 0x1ff)
+#define CALIB_BUF2_VTS_TS4_V1(x)	(((x) >> 23) & 0x1ff)
+#define CALIB_BUF2_VTS_TS5_V1(x)	(((x) >> 5) & 0x1ff)
+#define CALIB_BUF2_VTS_TSABB_V1(x)	(((x) >> 14) & 0x1ff)
+#define CALIB_BUF0_DEGC_CALI_V1(x)	(((x) >> 1) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_V1(x)	(((x) >> 26) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_SIGN_V1(x)	(((x) >> 7) & 0x1)
+#define CALIB_BUF1_ID_V1(x)		(((x) >> 9) & 0x1)
+
+/*
+ * Layout of the fuses providing the calibration data
+ * These macros could be used for MT7622.
+ */
+#define CALIB_BUF0_ADC_OE_V2(x)		(((x) >> 22) & 0x3ff)
+#define CALIB_BUF0_ADC_GE_V2(x)		(((x) >> 12) & 0x3ff)
+#define CALIB_BUF0_DEGC_CALI_V2(x)	(((x) >> 6) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_V2(x)	(((x) >> 0) & 0x3f)
+#define CALIB_BUF1_VTS_TS1_V2(x)	(((x) >> 23) & 0x1ff)
+#define CALIB_BUF1_VTS_TS2_V2(x)	(((x) >> 14) & 0x1ff)
+#define CALIB_BUF1_VTS_TSABB_V2(x)	(((x) >> 5) & 0x1ff)
+#define CALIB_BUF1_VALID_V2(x)		(((x) >> 4) & 0x1)
+#define CALIB_BUF1_O_SLOPE_SIGN_V2(x)	(((x) >> 3) & 0x1)
 
 enum {
 	VTS1,
@@ -143,6 +158,11 @@ enum {
 	MAX_NUM_VTS,
 };
 
+enum mtk_thermal_version {
+	MTK_THERMAL_V1 = 1,
+	MTK_THERMAL_V2,
+};
+
 /* MT2701 thermal sensors */
 #define MT2701_TS1	0
 #define MT2701_TS2	1
@@ -248,6 +268,7 @@ struct mtk_thermal_data {
 	const int *controller_offset;
 	bool need_switch_bank;
 	struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
+	enum mtk_thermal_version version;
 };
 
 struct mtk_thermal {
@@ -261,8 +282,10 @@ struct mtk_thermal {
 
 	/* Calibration values */
 	s32 adc_ge;
+	s32 adc_oe;
 	s32 degc_cali;
 	s32 o_slope;
+	s32 o_slope_sign;
 	s32 vts[MAX_NUM_VTS];
 
 	const struct mtk_thermal_data *conf;
@@ -401,6 +424,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
 	.msr = mt8173_msr,
 	.adcpnp = mt8173_adcpnp,
 	.sensor_mux_values = mt8173_mux_values,
+	.version = MTK_THERMAL_V1,
 };
 
 /*
@@ -431,6 +455,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
 	.msr = mt2701_msr,
 	.adcpnp = mt2701_adcpnp,
 	.sensor_mux_values = mt2701_mux_values,
+	.version = MTK_THERMAL_V1,
 };
 
 /*
@@ -461,6 +486,7 @@ static const struct mtk_thermal_data mt2712_thermal_data = {
 	.msr = mt2712_msr,
 	.adcpnp = mt2712_adcpnp,
 	.sensor_mux_values = mt2712_mux_values,
+	.version = MTK_THERMAL_V1,
 };
 
 /*
@@ -485,6 +511,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
 	.msr = mt7622_msr,
 	.adcpnp = mt7622_adcpnp,
 	.sensor_mux_values = mt7622_mux_values,
+	.version = MTK_THERMAL_V2,
 };
 
 /*
@@ -517,6 +544,7 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
 	.msr = mt8183_msr,
 	.adcpnp = mt8183_adcpnp,
 	.sensor_mux_values = mt8183_mux_values,
+	.version = MTK_THERMAL_V1,
 };
 
 /**
@@ -528,7 +556,7 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
  * This converts the raw ADC value to mcelsius using the SoC specific
  * calibration constants
  */
-static int raw_to_mcelsius(struct mtk_thermal *mt, int sensno, s32 raw)
+static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw)
 {
 	s32 tmp;
 
@@ -543,6 +571,36 @@ static int raw_to_mcelsius(struct mtk_thermal *mt, int sensno, s32 raw)
 	return mt->degc_cali * 500 - tmp;
 }
 
+static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw)
+{
+	s32 format_1 = 0;
+	s32 format_2 = 0;
+	s32 g_oe = 1;
+	s32 g_gain = 1;
+	s32 g_x_roomt = 0;
+	s32 tmp = 0;
+
+	if (raw == 0)
+		return 0;
+
+	raw &= 0xfff;
+	g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12);
+	g_oe = mt->adc_oe - 512;
+	format_1 = mt->vts[VTS2] + 3105 - g_oe;
+	format_2 = (mt->degc_cali * 10) >> 1;
+	g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain;
+
+	tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt;
+	tmp = tmp * 10 * 100 / 11;
+
+	if (mt->o_slope_sign == 0)
+		tmp = tmp / (165 - mt->o_slope);
+	else
+		tmp = tmp / (165 + mt->o_slope);
+
+	return (format_2 - tmp) * 100;
+}
+
 /**
  * mtk_thermal_get_bank - get bank
  * @bank:	The bank
@@ -596,9 +654,13 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
 	for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
 		raw = readl(mt->thermal_base + conf->msr[i]);
 
-		temp = raw_to_mcelsius(mt,
-				       conf->bank_data[bank->id].sensors[i],
-				       raw);
+		if (mt->conf->version == MTK_THERMAL_V1) {
+			temp = raw_to_mcelsius_v1(
+				mt, conf->bank_data[bank->id].sensors[i], raw);
+		} else {
+			temp = raw_to_mcelsius_v2(
+				mt, conf->bank_data[bank->id].sensors[i], raw);
+		}
 
 		/*
 		 * The first read of a sensor often contains very high bogus
@@ -700,9 +762,11 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
 	writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
 	       controller_base + TEMP_ADCMUXADDR);
 
-	/* AHB address for pnp sensor mux selection */
-	writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
-	       controller_base + TEMP_PNPMUXADDR);
+	if (mt->conf->version == MTK_THERMAL_V1) {
+		/* AHB address for pnp sensor mux selection */
+		writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
+		       controller_base + TEMP_PNPMUXADDR);
+	}
 
 	/* AHB value for auxadc enable */
 	writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN);
@@ -759,6 +823,68 @@ static u64 of_get_phys_base(struct device_node *np)
 	return of_translate_address(np, regaddr_p);
 }
 
+static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
+{
+	int i;
+
+	if (!(buf[0] & CALIB_BUF0_VALID_V1))
+		return -EINVAL;
+
+	mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]);
+
+	for (i = 0; i < mt->conf->num_sensors; i++) {
+		switch (mt->conf->vts_index[i]) {
+		case VTS1:
+			mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]);
+			break;
+		case VTS2:
+			mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]);
+			break;
+		case VTS3:
+			mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]);
+			break;
+		case VTS4:
+			mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]);
+			break;
+		case VTS5:
+			mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]);
+			break;
+		case VTSABB:
+			mt->vts[VTSABB] =
+				CALIB_BUF2_VTS_TSABB_V1(buf[2]);
+			break;
+		default:
+			break;
+		}
+	}
+
+	mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]);
+	if (CALIB_BUF1_ID_V1(buf[1]) &
+	    CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0]))
+		mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]);
+	else
+		mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]);
+
+	return 0;
+}
+
+static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf)
+{
+	if (!CALIB_BUF1_VALID_V2(buf[1]))
+		return -EINVAL;
+
+	mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]);
+	mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]);
+	mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]);
+	mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]);
+	mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]);
+	mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]);
+	mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]);
+	mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]);
+
+	return 0;
+}
+
 static int mtk_thermal_get_calibration_data(struct device *dev,
 					    struct mtk_thermal *mt)
 {
@@ -794,42 +920,14 @@ static int mtk_thermal_get_calibration_data(struct device *dev,
 		goto out;
 	}
 
-	if (buf[0] & CALIB_BUF0_VALID) {
-		mt->adc_ge = CALIB_BUF1_ADC_GE(buf[1]);
-
-		for (i = 0; i < mt->conf->num_sensors; i++) {
-			switch (mt->conf->vts_index[i]) {
-			case VTS1:
-				mt->vts[VTS1] = CALIB_BUF0_VTS_TS1(buf[0]);
-				break;
-			case VTS2:
-				mt->vts[VTS2] = CALIB_BUF0_VTS_TS2(buf[0]);
-				break;
-			case VTS3:
-				mt->vts[VTS3] = CALIB_BUF1_VTS_TS3(buf[1]);
-				break;
-			case VTS4:
-				mt->vts[VTS4] = CALIB_BUF2_VTS_TS4(buf[2]);
-				break;
-			case VTS5:
-				mt->vts[VTS5] = CALIB_BUF2_VTS_TS5(buf[2]);
-				break;
-			case VTSABB:
-				mt->vts[VTSABB] = CALIB_BUF2_VTS_TSABB(buf[2]);
-				break;
-			default:
-				break;
-			}
-		}
+	if (mt->conf->version == MTK_THERMAL_V1)
+		ret = mtk_thermal_extract_efuse_v1(mt, buf);
+	else
+		ret = mtk_thermal_extract_efuse_v2(mt, buf);
 
-		mt->degc_cali = CALIB_BUF0_DEGC_CALI(buf[0]);
-		if (CALIB_BUF1_ID(buf[1]) &
-		    CALIB_BUF0_O_SLOPE_SIGN(buf[0]))
-			mt->o_slope = -CALIB_BUF0_O_SLOPE(buf[0]);
-		else
-			mt->o_slope = CALIB_BUF0_O_SLOPE(buf[0]);
-	} else {
+	if (ret) {
 		dev_info(dev, "Device not calibrated, using default calibration values\n");
+		ret = 0;
 	}
 
 out:
@@ -863,6 +961,28 @@ static const struct of_device_id mtk_thermal_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
 
+static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
+{
+	int tmp;
+
+	tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
+	tmp &= ~(0x37);
+	tmp |= 0x1;
+	writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
+	udelay(200);
+}
+
+static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt,
+					    void __iomem *auxadc_base)
+{
+	int tmp;
+
+	writel(0x800, auxadc_base + AUXADC_CON1_SET_V);
+	writel(0x1, mt->thermal_base + TEMP_MONCTL0);
+	tmp = readl(mt->thermal_base + TEMP_MSRCTL1);
+	writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1);
+}
+
 static int mtk_thermal_probe(struct platform_device *pdev)
 {
 	int ret, i, ctrl_id;
@@ -871,6 +991,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 	struct resource *res;
 	u64 auxadc_phys_base, apmixed_phys_base;
 	struct thermal_zone_device *tzdev;
+	void __iomem *apmixed_base, *auxadc_base;
 
 	mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
 	if (!mt)
@@ -905,6 +1026,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	auxadc_base = of_iomap(auxadc, 0);
 	auxadc_phys_base = of_get_phys_base(auxadc);
 
 	of_node_put(auxadc);
@@ -920,6 +1042,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	apmixed_base = of_iomap(apmixedsys, 0);
 	apmixed_phys_base = of_get_phys_base(apmixedsys);
 
 	of_node_put(apmixedsys);
@@ -945,6 +1068,11 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		goto err_disable_clk_auxadc;
 	}
 
+	if (mt->conf->version == MTK_THERMAL_V2) {
+		mtk_thermal_turn_on_buffer(apmixed_base);
+		mtk_thermal_release_periodic_ts(mt, auxadc_base);
+	}
+
 	for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
 		for (i = 0; i < mt->conf->num_banks; i++)
 			mtk_thermal_init_bank(mt, i, apmixed_phys_base,
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 959a9371d205..e64db5f80d90 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -48,6 +48,63 @@
 #define MSM8916_CAL_SEL_MASK	0xe0000000
 #define MSM8916_CAL_SEL_SHIFT	29
 
+/* eeprom layout data for 8939 */
+#define MSM8939_BASE0_MASK	0x000000ff
+#define MSM8939_BASE1_MASK	0xff000000
+#define MSM8939_BASE0_SHIFT	0
+#define MSM8939_BASE1_SHIFT	24
+
+#define MSM8939_S0_P1_MASK	0x000001f8
+#define MSM8939_S1_P1_MASK	0x001f8000
+#define MSM8939_S2_P1_MASK_0_4	0xf8000000
+#define MSM8939_S2_P1_MASK_5	0x00000001
+#define MSM8939_S3_P1_MASK	0x00001f80
+#define MSM8939_S4_P1_MASK	0x01f80000
+#define MSM8939_S5_P1_MASK	0x00003f00
+#define MSM8939_S6_P1_MASK	0x03f00000
+#define MSM8939_S7_P1_MASK	0x0000003f
+#define MSM8939_S8_P1_MASK	0x0003f000
+#define MSM8939_S9_P1_MASK	0x07e00000
+
+#define MSM8939_S0_P2_MASK	0x00007e00
+#define MSM8939_S1_P2_MASK	0x07e00000
+#define MSM8939_S2_P2_MASK	0x0000007e
+#define MSM8939_S3_P2_MASK	0x0007e000
+#define MSM8939_S4_P2_MASK	0x7e000000
+#define MSM8939_S5_P2_MASK	0x000fc000
+#define MSM8939_S6_P2_MASK	0xfc000000
+#define MSM8939_S7_P2_MASK	0x00000fc0
+#define MSM8939_S8_P2_MASK	0x00fc0000
+#define MSM8939_S9_P2_MASK_0_4	0xf8000000
+#define MSM8939_S9_P2_MASK_5	0x00002000
+
+#define MSM8939_S0_P1_SHIFT	3
+#define MSM8939_S1_P1_SHIFT	15
+#define MSM8939_S2_P1_SHIFT_0_4	27
+#define MSM8939_S2_P1_SHIFT_5	0
+#define MSM8939_S3_P1_SHIFT	7
+#define MSM8939_S4_P1_SHIFT	19
+#define MSM8939_S5_P1_SHIFT	8
+#define MSM8939_S6_P1_SHIFT	20
+#define MSM8939_S7_P1_SHIFT	0
+#define MSM8939_S8_P1_SHIFT	12
+#define MSM8939_S9_P1_SHIFT	21
+
+#define MSM8939_S0_P2_SHIFT	9
+#define MSM8939_S1_P2_SHIFT	21
+#define MSM8939_S2_P2_SHIFT	1
+#define MSM8939_S3_P2_SHIFT	13
+#define MSM8939_S4_P2_SHIFT	25
+#define MSM8939_S5_P2_SHIFT	14
+#define MSM8939_S6_P2_SHIFT	26
+#define MSM8939_S7_P2_SHIFT	6
+#define MSM8939_S8_P2_SHIFT	18
+#define MSM8939_S9_P2_SHIFT_0_4	27
+#define MSM8939_S9_P2_SHIFT_5	13
+
+#define MSM8939_CAL_SEL_MASK	0x7
+#define MSM8939_CAL_SEL_SHIFT	0
+
 /* eeprom layout data for 8974 */
 #define BASE1_MASK		0xff
 #define S0_P1_MASK		0x3f00
@@ -189,6 +246,76 @@ static int calibrate_8916(struct tsens_priv *priv)
 	return 0;
 }
 
+static int calibrate_8939(struct tsens_priv *priv)
+{
+	int base0 = 0, base1 = 0, i;
+	u32 p1[10], p2[10];
+	int mode = 0;
+	u32 *qfprom_cdata;
+	u32 cdata[6];
+
+	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+	if (IS_ERR(qfprom_cdata))
+		return PTR_ERR(qfprom_cdata);
+
+	/* Mapping between qfprom nvmem and calibration data */
+	cdata[0] = qfprom_cdata[12];
+	cdata[1] = qfprom_cdata[13];
+	cdata[2] = qfprom_cdata[0];
+	cdata[3] = qfprom_cdata[1];
+	cdata[4] = qfprom_cdata[22];
+	cdata[5] = qfprom_cdata[21];
+
+	mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
+	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
+
+	switch (mode) {
+	case TWO_PT_CALIB:
+		base1 = (cdata[3] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
+		p2[0] = (cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
+		p2[1] = (cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
+		p2[2] = (cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
+		p2[3] = (cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
+		p2[4] = (cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
+		p2[5] = (cdata[2] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
+		p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
+		p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
+		p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
+		p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
+		p2[9] |= ((cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5) << 5;
+		for (i = 0; i < priv->num_sensors; i++)
+			p2[i] = (base1 + p2[i]) << 2;
+		fallthrough;
+	case ONE_PT_CALIB2:
+		base0 = (cdata[2] & MSM8939_BASE0_MASK) >> MSM8939_BASE0_SHIFT;
+		p1[0] = (cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT;
+		p1[1] = (cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT;
+		p1[2] = (cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4;
+		p1[2] |= ((cdata[1] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5) << 5;
+		p1[3] = (cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT;
+		p1[4] = (cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT;
+		p1[5] = (cdata[2] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT;
+		p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
+		p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT;
+		p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
+		p1[9] = (cdata[4] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
+		for (i = 0; i < priv->num_sensors; i++)
+			p1[i] = ((base0) + p1[i]) << 2;
+		break;
+	default:
+		for (i = 0; i < priv->num_sensors; i++) {
+			p1[i] = 500;
+			p2[i] = 780;
+		}
+		break;
+	}
+
+	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(qfprom_cdata);
+
+	return 0;
+}
+
 static int calibrate_8974(struct tsens_priv *priv)
 {
 	int base1 = 0, base2 = 0, i;
@@ -325,7 +452,7 @@ static int calibrate_8974(struct tsens_priv *priv)
 	return 0;
 }
 
-/* v0.1: 8916, 8974 */
+/* v0.1: 8916, 8939, 8974 */
 
 static struct tsens_features tsens_v0_1_feat = {
 	.ver_major	= VER_0_1,
@@ -386,6 +513,21 @@ struct tsens_plat_data data_8916 = {
 	.fields	= tsens_v0_1_regfields,
 };
 
+static const struct tsens_ops ops_8939 = {
+	.init		= init_common,
+	.calibrate	= calibrate_8939,
+	.get_temp	= get_temp_common,
+};
+
+struct tsens_plat_data data_8939 = {
+	.num_sensors	= 10,
+	.ops		= &ops_8939,
+	.hw_ids		= (unsigned int []){ 0, 1, 2, 4, 5, 6, 7, 8, 9, 10 },
+
+	.feat		= &tsens_v0_1_feat,
+	.fields	= tsens_v0_1_regfields,
+};
+
 static const struct tsens_ops ops_8974 = {
 	.init		= init_common,
 	.calibrate	= calibrate_8974,
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 39c4462e38f6..d8ce3a687b80 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -898,6 +898,9 @@ static const struct of_device_id tsens_table[] = {
 		.compatible = "qcom,msm8916-tsens",
 		.data = &data_8916,
 	}, {
+		.compatible = "qcom,msm8939-tsens",
+		.data = &data_8939,
+	}, {
 		.compatible = "qcom,msm8974-tsens",
 		.data = &data_8974,
 	}, {
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 59d01162c66a..f40b625f897e 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -585,7 +585,7 @@ int get_temp_common(const struct tsens_sensor *s, int *temp);
 extern struct tsens_plat_data data_8960;
 
 /* TSENS v0.1 targets */
-extern struct tsens_plat_data data_8916, data_8974;
+extern struct tsens_plat_data data_8916, data_8939, data_8974;
 
 /* TSENS v1 targets */
 extern struct tsens_plat_data data_tsens_v1, data_8976;
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index c48c5e9b8f20..0dd47dca3e77 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -63,7 +63,7 @@
 #define TSC_MAX_NUM	3
 
 /* default THCODE values if FUSEs are missing */
-static const int thcode[TSC_MAX_NUM][3] = {
+static const int thcodes[TSC_MAX_NUM][3] = {
 	{ 3397, 2800, 2221 },
 	{ 3393, 2795, 2216 },
 	{ 3389, 2805, 2237 },
@@ -172,7 +172,7 @@ static int rcar_gen3_thermal_get_temp(void *devdata, int *temp)
 	/* Read register and convert to mili Celsius */
 	reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK;
 
-	if (reg <= thcode[tsc->id][1])
+	if (reg <= thcodes[tsc->id][1])
 		val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1,
 				tsc->coef.a1);
 	else
@@ -315,6 +315,10 @@ static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
 		.data = &rcar_gen3_ths_tj_1,
 	},
 	{
+		.compatible = "renesas,r8a774e1-thermal",
+		.data = &rcar_gen3_ths_tj_1,
+	},
+	{
 		.compatible = "renesas,r8a7795-thermal",
 		.data = &rcar_gen3_ths_tj_1,
 	},
@@ -430,7 +434,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		priv->tscs[i] = tsc;
 
 		priv->thermal_init(tsc);
-		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcode[i],
+		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i],
 					     *rcar_gen3_ths_tj_1);
 
 		zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 46aeb28b4e90..787710bb88fe 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -550,12 +550,19 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			priv->zone = devm_thermal_zone_of_sensor_register(
 						dev, i, priv,
 						&rcar_thermal_zone_of_ops);
-		else
+		else {
 			priv->zone = thermal_zone_device_register(
 						"rcar_thermal",
 						1, 0, priv,
 						&rcar_thermal_zone_ops, NULL, 0,
 						idle);
+
+			ret = thermal_zone_device_enable(priv->zone);
+			if (ret) {
+				thermal_zone_device_unregister(priv->zone);
+				priv->zone = ERR_PTR(ret);
+			}
+		}
 		if (IS_ERR(priv->zone)) {
 			dev_err(dev, "can't register thermal zone\n");
 			ret = PTR_ERR(priv->zone);
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 15a71ecc916c..aa9e0e31ef98 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -1068,8 +1068,10 @@ rockchip_thermal_toggle_sensor(struct rockchip_thermal_sensor *sensor, bool on)
 {
 	struct thermal_zone_device *tzd = sensor->tzd;
 
-	tzd->ops->set_mode(tzd,
-		on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
+	if (on)
+		thermal_zone_device_enable(tzd);
+	else
+		thermal_zone_device_disable(tzd);
 }
 
 static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev)
diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c
index f68f581fd669..ee33ed692e4f 100644
--- a/drivers/thermal/spear_thermal.c
+++ b/drivers/thermal/spear_thermal.c
@@ -131,6 +131,11 @@ static int spear_thermal_probe(struct platform_device *pdev)
 		ret = PTR_ERR(spear_thermal);
 		goto disable_clk;
 	}
+	ret = thermal_zone_device_enable(spear_thermal);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot enable thermal zone\n");
+		goto unregister_tzd;
+	}
 
 	platform_set_drvdata(pdev, spear_thermal);
 
@@ -139,6 +144,8 @@ static int spear_thermal_probe(struct platform_device *pdev)
 
 	return 0;
 
+unregister_tzd:
+	thermal_zone_device_unregister(spear_thermal);
 disable_clk:
 	clk_disable(stdev->clk);
 
diff --git a/drivers/thermal/sprd_thermal.c b/drivers/thermal/sprd_thermal.c
index 4cde70dcf655..3682edb2f466 100644
--- a/drivers/thermal/sprd_thermal.c
+++ b/drivers/thermal/sprd_thermal.c
@@ -322,8 +322,10 @@ static void sprd_thm_toggle_sensor(struct sprd_thermal_sensor *sen, bool on)
 {
 	struct thermal_zone_device *tzd = sen->tzd;
 
-	tzd->ops->set_mode(tzd,
-		on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
+	if (on)
+		thermal_zone_device_enable(tzd);
+	else
+		thermal_zone_device_disable(tzd);
 }
 
 static int sprd_thm_probe(struct platform_device *pdev)
diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c
index b928ca6a289b..1276b95604fe 100644
--- a/drivers/thermal/st/st_thermal.c
+++ b/drivers/thermal/st/st_thermal.c
@@ -246,11 +246,16 @@ int st_thermal_register(struct platform_device *pdev,
 		ret = PTR_ERR(sensor->thermal_dev);
 		goto sensor_off;
 	}
+	ret = thermal_zone_device_enable(sensor->thermal_dev);
+	if (ret)
+		goto tzd_unregister;
 
 	platform_set_drvdata(pdev, sensor);
 
 	return 0;
 
+tzd_unregister:
+	thermal_zone_device_unregister(sensor->thermal_dev);
 sensor_off:
 	st_thermal_sensor_off(sensor);
 
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index b71196eaf90e..72bf159bcecc 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -215,6 +215,8 @@ exit:
 	mutex_unlock(&tz->lock);
 	mutex_unlock(&thermal_governor_lock);
 
+	thermal_notify_tz_gov_change(tz->id, policy);
+
 	return ret;
 }
 
@@ -301,13 +303,22 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
 		cancel_delayed_work(&tz->poll_queue);
 }
 
+static inline bool should_stop_polling(struct thermal_zone_device *tz)
+{
+	return !thermal_zone_device_is_enabled(tz);
+}
+
 static void monitor_thermal_zone(struct thermal_zone_device *tz)
 {
+	bool stop;
+
+	stop = should_stop_polling(tz);
+
 	mutex_lock(&tz->lock);
 
-	if (tz->passive)
+	if (!stop && tz->passive)
 		thermal_zone_device_set_polling(tz, tz->passive_delay);
-	else if (tz->polling_delay)
+	else if (!stop && tz->polling_delay)
 		thermal_zone_device_set_polling(tz, tz->polling_delay);
 	else
 		thermal_zone_device_set_polling(tz, 0);
@@ -406,12 +417,25 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
 static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
 {
 	enum thermal_trip_type type;
+	int trip_temp, hyst = 0;
 
 	/* Ignore disabled trip points */
 	if (test_bit(trip, &tz->trips_disabled))
 		return;
 
+	tz->ops->get_trip_temp(tz, trip, &trip_temp);
 	tz->ops->get_trip_type(tz, trip, &type);
+	if (tz->ops->get_trip_hyst)
+		tz->ops->get_trip_hyst(tz, trip, &hyst);
+
+	if (tz->last_temperature != THERMAL_TEMP_INVALID) {
+		if (tz->last_temperature < trip_temp &&
+		    tz->temperature >= trip_temp)
+			thermal_notify_tz_trip_up(tz->id, trip);
+		if (tz->last_temperature >= trip_temp &&
+		    tz->temperature < (trip_temp - hyst))
+			thermal_notify_tz_trip_down(tz->id, trip);
+	}
 
 	if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)
 		handle_critical_trips(tz, trip, type);
@@ -443,6 +467,8 @@ static void update_temperature(struct thermal_zone_device *tz)
 	mutex_unlock(&tz->lock);
 
 	trace_thermal_temperature(tz);
+
+	thermal_genl_sampling_temp(tz->id, temp);
 }
 
 static void thermal_zone_device_init(struct thermal_zone_device *tz)
@@ -459,11 +485,71 @@ static void thermal_zone_device_reset(struct thermal_zone_device *tz)
 	thermal_zone_device_init(tz);
 }
 
+static int thermal_zone_device_set_mode(struct thermal_zone_device *tz,
+					enum thermal_device_mode mode)
+{
+	int ret = 0;
+
+	mutex_lock(&tz->lock);
+
+	/* do nothing if mode isn't changing */
+	if (mode == tz->mode) {
+		mutex_unlock(&tz->lock);
+
+		return ret;
+	}
+
+	if (tz->ops->change_mode)
+		ret = tz->ops->change_mode(tz, mode);
+
+	if (!ret)
+		tz->mode = mode;
+
+	mutex_unlock(&tz->lock);
+
+	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
+
+	if (mode == THERMAL_DEVICE_ENABLED)
+		thermal_notify_tz_enable(tz->id);
+	else
+		thermal_notify_tz_disable(tz->id);
+
+	return ret;
+}
+
+int thermal_zone_device_enable(struct thermal_zone_device *tz)
+{
+	return thermal_zone_device_set_mode(tz, THERMAL_DEVICE_ENABLED);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_device_enable);
+
+int thermal_zone_device_disable(struct thermal_zone_device *tz)
+{
+	return thermal_zone_device_set_mode(tz, THERMAL_DEVICE_DISABLED);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_device_disable);
+
+int thermal_zone_device_is_enabled(struct thermal_zone_device *tz)
+{
+	enum thermal_device_mode mode;
+
+	mutex_lock(&tz->lock);
+
+	mode = tz->mode;
+
+	mutex_unlock(&tz->lock);
+
+	return mode == THERMAL_DEVICE_ENABLED;
+}
+
 void thermal_zone_device_update(struct thermal_zone_device *tz,
 				enum thermal_notify_event event)
 {
 	int count;
 
+	if (should_stop_polling(tz))
+		return;
+
 	if (atomic_read(&in_suspend))
 		return;
 
@@ -617,6 +703,73 @@ void thermal_zone_device_rebind_exception(struct thermal_zone_device *tz,
 	mutex_unlock(&thermal_list_lock);
 }
 
+int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *),
+			      void *data)
+{
+	struct thermal_governor *gov;
+	int ret = 0;
+
+	mutex_lock(&thermal_governor_lock);
+	list_for_each_entry(gov, &thermal_governor_list, governor_list) {
+		ret = cb(gov, data);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&thermal_governor_lock);
+
+	return ret;
+}
+
+int for_each_thermal_cooling_device(int (*cb)(struct thermal_cooling_device *,
+					      void *), void *data)
+{
+	struct thermal_cooling_device *cdev;
+	int ret = 0;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(cdev, &thermal_cdev_list, node) {
+		ret = cb(cdev, data);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&thermal_list_lock);
+
+	return ret;
+}
+
+int for_each_thermal_zone(int (*cb)(struct thermal_zone_device *, void *),
+			  void *data)
+{
+	struct thermal_zone_device *tz;
+	int ret = 0;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(tz, &thermal_tz_list, node) {
+		ret = cb(tz, data);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&thermal_list_lock);
+
+	return ret;
+}
+
+struct thermal_zone_device *thermal_zone_get_by_id(int id)
+{
+	struct thermal_zone_device *tz, *match = NULL;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(tz, &thermal_tz_list, node) {
+		if (tz->id == id) {
+			match = tz;
+			break;
+		}
+	}
+	mutex_unlock(&thermal_list_lock);
+
+	return match;
+}
+
 void thermal_zone_device_unbind_exception(struct thermal_zone_device *tz,
 					  const char *cdev_type, size_t size)
 {
@@ -1340,6 +1493,8 @@ thermal_zone_device_register(const char *type, int trips, int mask,
 	if (atomic_cmpxchg(&tz->need_update, 1, 0))
 		thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
 
+	thermal_notify_tz_create(tz->id, tz->type);
+
 	return tz;
 
 unregister:
@@ -1411,6 +1566,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 	ida_destroy(&tz->ida);
 	mutex_destroy(&tz->lock);
 	device_unregister(&tz->device);
+
+	thermal_notify_tz_delete(tz->id);
 }
 EXPORT_SYMBOL_GPL(thermal_zone_device_unregister);
 
@@ -1456,7 +1613,6 @@ static int thermal_pm_notify(struct notifier_block *nb,
 			     unsigned long mode, void *_unused)
 {
 	struct thermal_zone_device *tz;
-	enum thermal_device_mode tz_mode;
 
 	switch (mode) {
 	case PM_HIBERNATION_PREPARE:
@@ -1469,11 +1625,7 @@ static int thermal_pm_notify(struct notifier_block *nb,
 	case PM_POST_SUSPEND:
 		atomic_set(&in_suspend, 0);
 		list_for_each_entry(tz, &thermal_tz_list, node) {
-			tz_mode = THERMAL_DEVICE_ENABLED;
-			if (tz->ops->get_mode)
-				tz->ops->get_mode(tz, &tz_mode);
-
-			if (tz_mode == THERMAL_DEVICE_DISABLED)
+			if (!thermal_zone_device_is_enabled(tz))
 				continue;
 
 			thermal_zone_device_init(tz);
@@ -1495,6 +1647,10 @@ static int __init thermal_init(void)
 {
 	int result;
 
+	result = thermal_netlink_init();
+	if (result)
+		goto error;
+
 	mutex_init(&poweroff_lock);
 	result = thermal_register_governors();
 	if (result)
@@ -1527,4 +1683,4 @@ error:
 	mutex_destroy(&poweroff_lock);
 	return result;
 }
-core_initcall(thermal_init);
+postcore_initcall(thermal_init);
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index c95689586e19..e00fc5585ea8 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -12,6 +12,8 @@
 #include <linux/device.h>
 #include <linux/thermal.h>
 
+#include "thermal_netlink.h"
+
 /* Default Thermal Governor */
 #if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
 #define DEFAULT_THERMAL_GOVERNOR       "step_wise"
@@ -41,6 +43,17 @@ extern struct thermal_governor *__governor_thermal_table_end[];
 	     __governor < __governor_thermal_table_end;	\
 	     __governor++)
 
+int for_each_thermal_zone(int (*cb)(struct thermal_zone_device *, void *),
+			  void *);
+
+int for_each_thermal_cooling_device(int (*cb)(struct thermal_cooling_device *,
+					      void *), void *);
+
+int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *),
+			      void *thermal_governor);
+
+struct thermal_zone_device *thermal_zone_get_by_id(int id);
+
 struct thermal_attr {
 	struct device_attribute attr;
 	char name[THERMAL_NAME_LENGTH];
@@ -166,4 +179,6 @@ of_thermal_get_trip_points(struct thermal_zone_device *tz)
 }
 #endif
 
+int thermal_zone_device_is_enabled(struct thermal_zone_device *tz);
+
 #endif /* __THERMAL_CORE_H__ */
diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
index 87b1256fa2f2..c94bc824e5d3 100644
--- a/drivers/thermal/thermal_helpers.c
+++ b/drivers/thermal/thermal_helpers.c
@@ -175,6 +175,16 @@ exit:
 	mutex_unlock(&tz->lock);
 }
 
+static void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev,
+				       int target)
+{
+	if (cdev->ops->set_cur_state(cdev, target))
+		return;
+
+	thermal_notify_cdev_state_update(cdev->id, target);
+	thermal_cooling_device_stats_update(cdev, target);
+}
+
 void thermal_cdev_update(struct thermal_cooling_device *cdev)
 {
 	struct thermal_instance *instance;
@@ -197,8 +207,7 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev)
 			target = instance->target;
 	}
 
-	if (!cdev->ops->set_cur_state(cdev, target))
-		thermal_cooling_device_stats_update(cdev, target);
+	thermal_cdev_set_cur_state(cdev, target);
 
 	cdev->updated = true;
 	mutex_unlock(&cdev->lock);
diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c
new file mode 100644
index 000000000000..af7b2383e8f6
--- /dev/null
+++ b/drivers/thermal/thermal_netlink.c
@@ -0,0 +1,647 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 Linaro Limited
+ *
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ *
+ * Generic netlink for thermal management framework
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <net/genetlink.h>
+#include <uapi/linux/thermal.h>
+
+#include "thermal_core.h"
+
+static const struct genl_multicast_group thermal_genl_mcgrps[] = {
+	{ .name = THERMAL_GENL_SAMPLING_GROUP_NAME, },
+	{ .name = THERMAL_GENL_EVENT_GROUP_NAME,  },
+};
+
+static const struct nla_policy thermal_genl_policy[THERMAL_GENL_ATTR_MAX + 1] = {
+	/* Thermal zone */
+	[THERMAL_GENL_ATTR_TZ]			= { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_TZ_ID]		= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TEMP]		= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TRIP]		= { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_TZ_TRIP_ID]		= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TRIP_TEMP]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TRIP_TYPE]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_TRIP_HYST]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_MODE]		= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_CDEV_WEIGHT]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_TZ_NAME]		= { .type = NLA_STRING,
+						    .len = THERMAL_NAME_LENGTH },
+	/* Governor(s) */
+	[THERMAL_GENL_ATTR_TZ_GOV]		= { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_TZ_GOV_NAME]		= { .type = NLA_STRING,
+						    .len = THERMAL_NAME_LENGTH },
+	/* Cooling devices */
+	[THERMAL_GENL_ATTR_CDEV]		= { .type = NLA_NESTED },
+	[THERMAL_GENL_ATTR_CDEV_ID]		= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CDEV_CUR_STATE]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CDEV_MAX_STATE]	= { .type = NLA_U32 },
+	[THERMAL_GENL_ATTR_CDEV_NAME]		= { .type = NLA_STRING,
+						    .len = THERMAL_NAME_LENGTH },
+};
+
+struct param {
+	struct nlattr **attrs;
+	struct sk_buff *msg;
+	const char *name;
+	int tz_id;
+	int cdev_id;
+	int trip_id;
+	int trip_temp;
+	int trip_type;
+	int trip_hyst;
+	int temp;
+	int cdev_state;
+	int cdev_max_state;
+};
+
+typedef int (*cb_t)(struct param *);
+
+static struct genl_family thermal_gnl_family;
+
+/************************** Sampling encoding *******************************/
+
+int thermal_genl_sampling_temp(int id, int temp)
+{
+	struct sk_buff *skb;
+	void *hdr;
+
+	skb = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	hdr = genlmsg_put(skb, 0, 0, &thermal_gnl_family, 0,
+			  THERMAL_GENL_SAMPLING_TEMP);
+	if (!hdr)
+		return -EMSGSIZE;
+
+	if (nla_put_u32(skb, THERMAL_GENL_ATTR_TZ_ID, id))
+		goto out_cancel;
+
+	if (nla_put_u32(skb, THERMAL_GENL_ATTR_TZ_TEMP, temp))
+		goto out_cancel;
+
+	genlmsg_end(skb, hdr);
+
+	genlmsg_multicast(&thermal_gnl_family, skb, 0, 0, GFP_KERNEL);
+
+	return 0;
+out_cancel:
+	genlmsg_cancel(skb, hdr);
+	nlmsg_free(skb);
+
+	return -EMSGSIZE;
+}
+
+/**************************** Event encoding *********************************/
+
+static int thermal_genl_event_tz_create(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
+	    nla_put_string(p->msg, THERMAL_GENL_ATTR_TZ_NAME, p->name))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_tz(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_tz_trip_up(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_tz_trip_add(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_TYPE, p->trip_type) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_TEMP, p->trip_temp) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_HYST, p->trip_hyst))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_tz_trip_delete(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_cdev_add(struct param *p)
+{
+	if (nla_put_string(p->msg, THERMAL_GENL_ATTR_CDEV_NAME,
+			   p->name) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_ID,
+			p->cdev_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_MAX_STATE,
+			p->cdev_max_state))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_cdev_delete(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_ID, p->cdev_id))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_cdev_state_update(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_ID,
+			p->cdev_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_CDEV_CUR_STATE,
+			p->cdev_state))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_event_gov_change(struct param *p)
+{
+	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
+	    nla_put_string(p->msg, THERMAL_GENL_ATTR_GOV_NAME, p->name))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+int thermal_genl_event_tz_delete(struct param *p)
+	__attribute__((alias("thermal_genl_event_tz")));
+
+int thermal_genl_event_tz_enable(struct param *p)
+	__attribute__((alias("thermal_genl_event_tz")));
+
+int thermal_genl_event_tz_disable(struct param *p)
+	__attribute__((alias("thermal_genl_event_tz")));
+
+int thermal_genl_event_tz_trip_down(struct param *p)
+	__attribute__((alias("thermal_genl_event_tz_trip_up")));
+
+int thermal_genl_event_tz_trip_change(struct param *p)
+	__attribute__((alias("thermal_genl_event_tz_trip_add")));
+
+static cb_t event_cb[] = {
+	[THERMAL_GENL_EVENT_TZ_CREATE]		= thermal_genl_event_tz_create,
+	[THERMAL_GENL_EVENT_TZ_DELETE]		= thermal_genl_event_tz_delete,
+	[THERMAL_GENL_EVENT_TZ_ENABLE]		= thermal_genl_event_tz_enable,
+	[THERMAL_GENL_EVENT_TZ_DISABLE]		= thermal_genl_event_tz_disable,
+	[THERMAL_GENL_EVENT_TZ_TRIP_UP]		= thermal_genl_event_tz_trip_up,
+	[THERMAL_GENL_EVENT_TZ_TRIP_DOWN]	= thermal_genl_event_tz_trip_down,
+	[THERMAL_GENL_EVENT_TZ_TRIP_CHANGE]	= thermal_genl_event_tz_trip_change,
+	[THERMAL_GENL_EVENT_TZ_TRIP_ADD]	= thermal_genl_event_tz_trip_add,
+	[THERMAL_GENL_EVENT_TZ_TRIP_DELETE]	= thermal_genl_event_tz_trip_delete,
+	[THERMAL_GENL_EVENT_CDEV_ADD]		= thermal_genl_event_cdev_add,
+	[THERMAL_GENL_EVENT_CDEV_DELETE]	= thermal_genl_event_cdev_delete,
+	[THERMAL_GENL_EVENT_CDEV_STATE_UPDATE]	= thermal_genl_event_cdev_state_update,
+	[THERMAL_GENL_EVENT_TZ_GOV_CHANGE]	= thermal_genl_event_gov_change,
+};
+
+/*
+ * Generic netlink event encoding
+ */
+static int thermal_genl_send_event(enum thermal_genl_event event,
+				   struct param *p)
+{
+	struct sk_buff *msg;
+	int ret = -EMSGSIZE;
+	void *hdr;
+
+	msg = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	p->msg = msg;
+
+	hdr = genlmsg_put(msg, 0, 0, &thermal_gnl_family, 0, event);
+	if (!hdr)
+		goto out_free_msg;
+
+	ret = event_cb[event](p);
+	if (ret)
+		goto out_cancel_msg;
+
+	genlmsg_end(msg, hdr);
+
+	genlmsg_multicast(&thermal_gnl_family, msg, 0, 1, GFP_KERNEL);
+
+	return 0;
+
+out_cancel_msg:
+	genlmsg_cancel(msg, hdr);
+out_free_msg:
+	nlmsg_free(msg);
+
+	return ret;
+}
+
+int thermal_notify_tz_create(int tz_id, const char *name)
+{
+	struct param p = { .tz_id = tz_id, .name = name };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_CREATE, &p);
+}
+
+int thermal_notify_tz_delete(int tz_id)
+{
+	struct param p = { .tz_id = tz_id };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DELETE, &p);
+}
+
+int thermal_notify_tz_enable(int tz_id)
+{
+	struct param p = { .tz_id = tz_id };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_ENABLE, &p);
+}
+
+int thermal_notify_tz_disable(int tz_id)
+{
+	struct param p = { .tz_id = tz_id };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p);
+}
+
+int thermal_notify_tz_trip_down(int tz_id, int trip_id)
+{
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p);
+}
+
+int thermal_notify_tz_trip_up(int tz_id, int trip_id)
+{
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p);
+}
+
+int thermal_notify_tz_trip_add(int tz_id, int trip_id, int trip_type,
+			       int trip_temp, int trip_hyst)
+{
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id,
+			   .trip_type = trip_type, .trip_temp = trip_temp,
+			   .trip_hyst = trip_hyst };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_ADD, &p);
+}
+
+int thermal_notify_tz_trip_delete(int tz_id, int trip_id)
+{
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DELETE, &p);
+}
+
+int thermal_notify_tz_trip_change(int tz_id, int trip_id, int trip_type,
+				  int trip_temp, int trip_hyst)
+{
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id,
+			   .trip_type = trip_type, .trip_temp = trip_temp,
+			   .trip_hyst = trip_hyst };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_CHANGE, &p);
+}
+
+int thermal_notify_cdev_state_update(int cdev_id, int cdev_state)
+{
+	struct param p = { .cdev_id = cdev_id, .cdev_state = cdev_state };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_CDEV_STATE_UPDATE, &p);
+}
+
+int thermal_notify_cdev_add(int cdev_id, const char *name, int cdev_max_state)
+{
+	struct param p = { .cdev_id = cdev_id, .name = name,
+			   .cdev_max_state = cdev_max_state };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_CDEV_ADD, &p);
+}
+
+int thermal_notify_cdev_delete(int cdev_id)
+{
+	struct param p = { .cdev_id = cdev_id };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_CDEV_DELETE, &p);
+}
+
+int thermal_notify_tz_gov_change(int tz_id, const char *name)
+{
+	struct param p = { .tz_id = tz_id, .name = name };
+
+	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_GOV_CHANGE, &p);
+}
+
+/*************************** Command encoding ********************************/
+
+static int __thermal_genl_cmd_tz_get_id(struct thermal_zone_device *tz,
+					void *data)
+{
+	struct sk_buff *msg = data;
+
+	if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_ID, tz->id) ||
+	    nla_put_string(msg, THERMAL_GENL_ATTR_TZ_NAME, tz->type))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_cmd_tz_get_id(struct param *p)
+{
+	struct sk_buff *msg = p->msg;
+	struct nlattr *start_tz;
+	int ret;
+
+	start_tz = nla_nest_start(msg, THERMAL_GENL_ATTR_TZ);
+	if (!start_tz)
+		return -EMSGSIZE;
+
+	ret = for_each_thermal_zone(__thermal_genl_cmd_tz_get_id, msg);
+	if (ret)
+		goto out_cancel_nest;
+
+	nla_nest_end(msg, start_tz);
+
+	return 0;
+
+out_cancel_nest:
+	nla_nest_cancel(msg, start_tz);
+
+	return ret;
+}
+
+static int thermal_genl_cmd_tz_get_trip(struct param *p)
+{
+	struct sk_buff *msg = p->msg;
+	struct thermal_zone_device *tz;
+	struct nlattr *start_trip;
+	int i, id;
+
+	if (!p->attrs[THERMAL_GENL_ATTR_TZ_ID])
+		return -EINVAL;
+
+	id = nla_get_u32(p->attrs[THERMAL_GENL_ATTR_TZ_ID]);
+
+	tz = thermal_zone_get_by_id(id);
+	if (!tz)
+		return -EINVAL;
+
+	start_trip = nla_nest_start(msg, THERMAL_GENL_ATTR_TZ_TRIP);
+	if (!start_trip)
+		return -EMSGSIZE;
+
+	mutex_lock(&tz->lock);
+
+	for (i = 0; i < tz->trips; i++) {
+
+		enum thermal_trip_type type;
+		int temp, hyst;
+
+		tz->ops->get_trip_type(tz, i, &type);
+		tz->ops->get_trip_temp(tz, i, &temp);
+		tz->ops->get_trip_hyst(tz, i, &hyst);
+
+		if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, i) ||
+		    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_TYPE, type) ||
+		    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_TEMP, temp) ||
+		    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_HYST, hyst))
+			goto out_cancel_nest;
+	}
+
+	mutex_unlock(&tz->lock);
+
+	nla_nest_end(msg, start_trip);
+
+	return 0;
+
+out_cancel_nest:
+	mutex_unlock(&tz->lock);
+
+	return -EMSGSIZE;
+}
+
+static int thermal_genl_cmd_tz_get_temp(struct param *p)
+{
+	struct sk_buff *msg = p->msg;
+	struct thermal_zone_device *tz;
+	int temp, ret, id;
+
+	if (!p->attrs[THERMAL_GENL_ATTR_TZ_ID])
+		return -EINVAL;
+
+	id = nla_get_u32(p->attrs[THERMAL_GENL_ATTR_TZ_ID]);
+
+	tz = thermal_zone_get_by_id(id);
+	if (!tz)
+		return -EINVAL;
+
+	ret = thermal_zone_get_temp(tz, &temp);
+	if (ret)
+		return ret;
+
+	if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_ID, id) ||
+	    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TEMP, temp))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_cmd_tz_get_gov(struct param *p)
+{
+	struct sk_buff *msg = p->msg;
+	struct thermal_zone_device *tz;
+	int id, ret = 0;
+
+	if (!p->attrs[THERMAL_GENL_ATTR_TZ_ID])
+		return -EINVAL;
+
+	id = nla_get_u32(p->attrs[THERMAL_GENL_ATTR_TZ_ID]);
+
+	tz = thermal_zone_get_by_id(id);
+	if (!tz)
+		return -EINVAL;
+
+	mutex_lock(&tz->lock);
+
+	if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_ID, id) ||
+	    nla_put_string(msg, THERMAL_GENL_ATTR_TZ_GOV_NAME,
+			   tz->governor->name))
+		ret = -EMSGSIZE;
+
+	mutex_unlock(&tz->lock);
+
+	return ret;
+}
+
+static int __thermal_genl_cmd_cdev_get(struct thermal_cooling_device *cdev,
+				       void *data)
+{
+	struct sk_buff *msg = data;
+
+	if (nla_put_u32(msg, THERMAL_GENL_ATTR_CDEV_ID, cdev->id))
+		return -EMSGSIZE;
+
+	if (nla_put_string(msg, THERMAL_GENL_ATTR_CDEV_NAME, cdev->type))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int thermal_genl_cmd_cdev_get(struct param *p)
+{
+	struct sk_buff *msg = p->msg;
+	struct nlattr *start_cdev;
+	int ret;
+
+	start_cdev = nla_nest_start(msg, THERMAL_GENL_ATTR_CDEV);
+	if (!start_cdev)
+		return -EMSGSIZE;
+
+	ret = for_each_thermal_cooling_device(__thermal_genl_cmd_cdev_get, msg);
+	if (ret)
+		goto out_cancel_nest;
+
+	nla_nest_end(msg, start_cdev);
+
+	return 0;
+out_cancel_nest:
+	nla_nest_cancel(msg, start_cdev);
+
+	return ret;
+}
+
+static cb_t cmd_cb[] = {
+	[THERMAL_GENL_CMD_TZ_GET_ID]	= thermal_genl_cmd_tz_get_id,
+	[THERMAL_GENL_CMD_TZ_GET_TRIP]	= thermal_genl_cmd_tz_get_trip,
+	[THERMAL_GENL_CMD_TZ_GET_TEMP]	= thermal_genl_cmd_tz_get_temp,
+	[THERMAL_GENL_CMD_TZ_GET_GOV]	= thermal_genl_cmd_tz_get_gov,
+	[THERMAL_GENL_CMD_CDEV_GET]	= thermal_genl_cmd_cdev_get,
+};
+
+static int thermal_genl_cmd_dumpit(struct sk_buff *skb,
+				   struct netlink_callback *cb)
+{
+	struct param p = { .msg = skb };
+	const struct genl_dumpit_info *info = genl_dumpit_info(cb);
+	int cmd = info->ops->cmd;
+	int ret;
+	void *hdr;
+
+	hdr = genlmsg_put(skb, 0, 0, &thermal_gnl_family, 0, cmd);
+	if (!hdr)
+		return -EMSGSIZE;
+
+	ret = cmd_cb[cmd](&p);
+	if (ret)
+		goto out_cancel_msg;
+
+	genlmsg_end(skb, hdr);
+
+	return 0;
+
+out_cancel_msg:
+	genlmsg_cancel(skb, hdr);
+
+	return ret;
+}
+
+static int thermal_genl_cmd_doit(struct sk_buff *skb,
+				 struct genl_info *info)
+{
+	struct param p = { .attrs = info->attrs };
+	struct sk_buff *msg;
+	void *hdr;
+	int cmd = info->genlhdr->cmd;
+	int ret = -EMSGSIZE;
+
+	msg = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	p.msg = msg;
+
+	hdr = genlmsg_put_reply(msg, info, &thermal_gnl_family, 0, cmd);
+	if (!hdr)
+		goto out_free_msg;
+
+	ret = cmd_cb[cmd](&p);
+	if (ret)
+		goto out_cancel_msg;
+
+	genlmsg_end(msg, hdr);
+
+	return genlmsg_reply(msg, info);
+
+out_cancel_msg:
+	genlmsg_cancel(msg, hdr);
+out_free_msg:
+	nlmsg_free(msg);
+
+	return ret;
+}
+
+static const struct genl_ops thermal_genl_ops[] = {
+	{
+		.cmd = THERMAL_GENL_CMD_TZ_GET_ID,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.dumpit = thermal_genl_cmd_dumpit,
+	},
+	{
+		.cmd = THERMAL_GENL_CMD_TZ_GET_TRIP,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = thermal_genl_cmd_doit,
+	},
+	{
+		.cmd = THERMAL_GENL_CMD_TZ_GET_TEMP,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = thermal_genl_cmd_doit,
+	},
+	{
+		.cmd = THERMAL_GENL_CMD_TZ_GET_GOV,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = thermal_genl_cmd_doit,
+	},
+	{
+		.cmd = THERMAL_GENL_CMD_CDEV_GET,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.dumpit = thermal_genl_cmd_dumpit,
+	},
+};
+
+static struct genl_family thermal_gnl_family __ro_after_init = {
+	.hdrsize	= 0,
+	.name		= THERMAL_GENL_FAMILY_NAME,
+	.version	= THERMAL_GENL_VERSION,
+	.maxattr	= THERMAL_GENL_ATTR_MAX,
+	.policy		= thermal_genl_policy,
+	.ops		= thermal_genl_ops,
+	.n_ops		= ARRAY_SIZE(thermal_genl_ops),
+	.mcgrps		= thermal_genl_mcgrps,
+	.n_mcgrps	= ARRAY_SIZE(thermal_genl_mcgrps),
+};
+
+int __init thermal_netlink_init(void)
+{
+	return genl_register_family(&thermal_gnl_family);
+}
diff --git a/drivers/thermal/thermal_netlink.h b/drivers/thermal/thermal_netlink.h
new file mode 100644
index 000000000000..828d1dddfa98
--- /dev/null
+++ b/drivers/thermal/thermal_netlink.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) Linaro Ltd 2020
+ *  Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ */
+
+/* Netlink notification function */
+#ifdef CONFIG_THERMAL_NETLINK
+int __init thermal_netlink_init(void);
+int thermal_notify_tz_create(int tz_id, const char *name);
+int thermal_notify_tz_delete(int tz_id);
+int thermal_notify_tz_enable(int tz_id);
+int thermal_notify_tz_disable(int tz_id);
+int thermal_notify_tz_trip_down(int tz_id, int id);
+int thermal_notify_tz_trip_up(int tz_id, int id);
+int thermal_notify_tz_trip_delete(int tz_id, int id);
+int thermal_notify_tz_trip_add(int tz_id, int id, int type,
+			       int temp, int hyst);
+int thermal_notify_tz_trip_change(int tz_id, int id, int type,
+				  int temp, int hyst);
+int thermal_notify_cdev_state_update(int cdev_id, int state);
+int thermal_notify_cdev_add(int cdev_id, const char *name, int max_state);
+int thermal_notify_cdev_delete(int cdev_id);
+int thermal_notify_tz_gov_change(int tz_id, const char *name);
+int thermal_genl_sampling_temp(int id, int temp);
+#else
+static inline int thermal_netlink_init(void)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_create(int tz_id, const char *name)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_delete(int tz_id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_enable(int tz_id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_disable(int tz_id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_down(int tz_id, int id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_up(int tz_id, int id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_delete(int tz_id, int id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_add(int tz_id, int id, int type,
+					     int temp, int hyst)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_change(int tz_id, int id, int type,
+						int temp, int hyst)
+{
+	return 0;
+}
+
+static inline int thermal_notify_cdev_state_update(int cdev_id, int state)
+{
+	return 0;
+}
+
+static inline int thermal_notify_cdev_add(int cdev_id, const char *name,
+					  int max_state)
+{
+	return 0;
+}
+
+static inline int thermal_notify_cdev_delete(int cdev_id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_gov_change(int tz_id, const char *name)
+{
+	return 0;
+}
+
+static inline int thermal_genl_sampling_temp(int id, int temp)
+{
+	return 0;
+}
+#endif /* CONFIG_THERMAL_NETLINK */
diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index ddf88dbe7ba2..69ef12f852b7 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -51,7 +51,6 @@ struct __thermal_bind_params {
 
 /**
  * struct __thermal_zone - internal representation of a thermal zone
- * @mode: current thermal zone device mode (enabled/disabled)
  * @passive_delay: polling interval while passive cooling is activated
  * @polling_delay: zone polling interval
  * @slope: slope of the temperature adjustment curve
@@ -65,7 +64,6 @@ struct __thermal_bind_params {
  */
 
 struct __thermal_zone {
-	enum thermal_device_mode mode;
 	int passive_delay;
 	int polling_delay;
 	int slope;
@@ -269,39 +267,6 @@ static int of_thermal_unbind(struct thermal_zone_device *thermal,
 	return 0;
 }
 
-static int of_thermal_get_mode(struct thermal_zone_device *tz,
-			       enum thermal_device_mode *mode)
-{
-	struct __thermal_zone *data = tz->devdata;
-
-	*mode = data->mode;
-
-	return 0;
-}
-
-static int of_thermal_set_mode(struct thermal_zone_device *tz,
-			       enum thermal_device_mode mode)
-{
-	struct __thermal_zone *data = tz->devdata;
-
-	mutex_lock(&tz->lock);
-
-	if (mode == THERMAL_DEVICE_ENABLED) {
-		tz->polling_delay = data->polling_delay;
-		tz->passive_delay = data->passive_delay;
-	} else {
-		tz->polling_delay = 0;
-		tz->passive_delay = 0;
-	}
-
-	mutex_unlock(&tz->lock);
-
-	data->mode = mode;
-	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-
-	return 0;
-}
-
 static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
 				    enum thermal_trip_type *type)
 {
@@ -393,9 +358,6 @@ static int of_thermal_get_crit_temp(struct thermal_zone_device *tz,
 }
 
 static struct thermal_zone_device_ops of_thermal_ops = {
-	.get_mode = of_thermal_get_mode,
-	.set_mode = of_thermal_set_mode,
-
 	.get_trip_type = of_thermal_get_trip_type,
 	.get_trip_temp = of_thermal_get_trip_temp,
 	.set_trip_temp = of_thermal_set_trip_temp,
@@ -554,7 +516,7 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, void *data,
 			tzd = thermal_zone_of_add_sensor(child, sensor_np,
 							 data, ops);
 			if (!IS_ERR(tzd))
-				tzd->ops->set_mode(tzd, THERMAL_DEVICE_ENABLED);
+				thermal_zone_device_enable(tzd);
 
 			of_node_put(child);
 			goto exit;
@@ -979,7 +941,6 @@ __init *thermal_of_build_thermal_zone(struct device_node *np)
 
 finish:
 	of_node_put(child);
-	tz->mode = THERMAL_DEVICE_DISABLED;
 
 	return tz;
 
diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
index aa99edb4dff7..8c231219e15d 100644
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
@@ -49,18 +49,9 @@ static ssize_t
 mode_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	enum thermal_device_mode mode;
-	int result;
-
-	if (!tz->ops->get_mode)
-		return -EPERM;
+	int enabled = thermal_zone_device_is_enabled(tz);
 
-	result = tz->ops->get_mode(tz, &mode);
-	if (result)
-		return result;
-
-	return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled"
-		       : "disabled");
+	return sprintf(buf, "%s\n", enabled ? "enabled" : "disabled");
 }
 
 static ssize_t
@@ -70,13 +61,10 @@ mode_store(struct device *dev, struct device_attribute *attr,
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
 	int result;
 
-	if (!tz->ops->set_mode)
-		return -EPERM;
-
 	if (!strncmp(buf, "enabled", sizeof("enabled") - 1))
-		result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED);
+		result = thermal_zone_device_enable(tz);
 	else if (!strncmp(buf, "disabled", sizeof("disabled") - 1))
-		result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED);
+		result = thermal_zone_device_disable(tz);
 	else
 		result = -EINVAL;
 
@@ -124,7 +112,8 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr,
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
 	int trip, ret;
-	int temperature;
+	int temperature, hyst = 0;
+	enum thermal_trip_type type;
 
 	if (!tz->ops->set_trip_temp)
 		return -EPERM;
@@ -139,6 +128,18 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr,
 	if (ret)
 		return ret;
 
+	if (tz->ops->get_trip_hyst) {
+		ret = tz->ops->get_trip_hyst(tz, trip, &hyst);
+		if (ret)
+			return ret;
+	}
+
+	ret = tz->ops->get_trip_type(tz, trip, &type);
+	if (ret)
+		return ret;
+
+	thermal_notify_tz_trip_change(tz->id, trip, type, temperature, hyst);
+
 	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
 
 	return count;
@@ -428,30 +429,13 @@ static struct attribute_group thermal_zone_attribute_group = {
 	.attrs = thermal_zone_dev_attrs,
 };
 
-/* We expose mode only if .get_mode is present */
 static struct attribute *thermal_zone_mode_attrs[] = {
 	&dev_attr_mode.attr,
 	NULL,
 };
 
-static umode_t thermal_zone_mode_is_visible(struct kobject *kobj,
-					    struct attribute *attr,
-					    int attrno)
-{
-	struct device *dev = container_of(kobj, struct device, kobj);
-	struct thermal_zone_device *tz;
-
-	tz = container_of(dev, struct thermal_zone_device, device);
-
-	if (tz->ops->get_mode)
-		return attr->mode;
-
-	return 0;
-}
-
 static struct attribute_group thermal_zone_mode_attribute_group = {
 	.attrs = thermal_zone_mode_attrs,
-	.is_visible = thermal_zone_mode_is_visible,
 };
 
 /* We expose passive only if passive trips are present */
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 85776db4bf34..2ce4b19f312a 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -169,7 +169,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
 
-	if (!IS_ERR_OR_NULL(data))
+	if (IS_ERR_OR_NULL(data))
 		data = ti_thermal_build_data(bgp, id);
 
 	if (!data)