Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of Thunderbolt and USB changes for 6.0-rc1.

  Lots of little things here, nothing major, just constant development
  on some new hardware support and cleanups of older drivers. Highlights
  are:

   - lots of typec changes and improvements for new hardware

   - new gadget controller driver

   - thunderbolt support for new hardware

   - the normal set of new usb-serial device ids and cleanups

   - loads of dwc3 controller fixes and improvements

   - mtu3 driver updates

   - testusb fixes for longtime issues (not many people use this tool it
     seems.)

   - minor driver fixes and improvements over the USB tree

   - chromeos platform driver changes were added and then reverted as
     they depened on some typec changes, but the cross-tree merges
     caused problems so they will come back later through the platform
     tree.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
  usb: misc: onboard_usb_hub: Remove duplicated power_on delay
  usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  usb: misc: onboard_usb_hub: Add reset-gpio support
  USB: usbsevseg: convert sysfs snprintf to sysfs_emit
  dt-bindings: usb: Add binding for TI USB8041 hub controller
  ARM: multi_v7_defconfig: enable USB onboard HUB driver
  ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
  usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
  dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
  usb: typec: ucsi: stm32g0: add bootloader support
  usb: typec: ucsi: stm32g0: add support for stm32g0 controller
  dt-bindings: usb: typec: add bindings for stm32g0 controller
  usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
  usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
  usb/chipidea: fix repeated words in comments
  usb: renesas-xhci: Do not print any log while fw verif success
  usb: typec: retimer: Add missing id check in match callback
  USB: xhci: Fix comment typo
  usb/typec/tcpm: fix repeated words in comments
  usb/musb: fix repeated words in comments
  ...

10 files changed, 335 insertions, 115 deletions

diff --git a/drivers/thunderbolt/ctl.c b/drivers/thunderbolt/ctl.c
index e92c658dba1c..e5ede5debfb0 100644
--- a/drivers/thunderbolt/ctl.c
+++ b/drivers/thunderbolt/ctl.c
@@ -694,7 +694,7 @@ void tb_ctl_free(struct tb_ctl *ctl)
 }
 
 /**
- * tb_cfg_start() - start/resume the control channel
+ * tb_ctl_start() - start/resume the control channel
  * @ctl: Control channel to start
  */
 void tb_ctl_start(struct tb_ctl *ctl)
@@ -710,7 +710,7 @@ void tb_ctl_start(struct tb_ctl *ctl)
 }
 
 /**
- * tb_ctrl_stop() - pause the control channel
+ * tb_ctl_stop() - pause the control channel
  * @ctl: Control channel to stop
  *
  * All invocations of ctl->callback will have finished after this method
@@ -912,7 +912,7 @@ struct tb_cfg_result tb_cfg_read_raw(struct tb_ctl *ctl, void *buffer,
 }
 
 /**
- * tb_cfg_write() - write from buffer into config space
+ * tb_cfg_write_raw() - write from buffer into config space
  * @ctl: Pointer to the control channel
  * @buffer: Data to write
  * @route: Route string of the router
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index e8c64898dfce..7c7d80f96c0c 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -35,7 +35,7 @@ struct tb_cfg_result {
 			    * If err = 1 then this is the port that send the
 			    * error.
 			    * If err = 0 and if this was a cfg_read/write then
-			    * this is the the upstream port of the responding
+			    * this is the upstream port of the responding
 			    * switch.
 			    * Otherwise the field is set to zero.
 			    */
diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c
index fff0c740c8f3..ae38f0d25a8d 100644
--- a/drivers/thunderbolt/icm.c
+++ b/drivers/thunderbolt/icm.c
@@ -2516,6 +2516,8 @@ struct tb *icm_probe(struct tb_nhi *nhi)
 	case PCI_DEVICE_ID_INTEL_TGL_H_NHI1:
 	case PCI_DEVICE_ID_INTEL_ADL_NHI0:
 	case PCI_DEVICE_ID_INTEL_ADL_NHI1:
+	case PCI_DEVICE_ID_INTEL_RPL_NHI0:
+	case PCI_DEVICE_ID_INTEL_RPL_NHI1:
 		icm->is_supported = icm_tgl_is_supported;
 		icm->driver_ready = icm_icl_driver_ready;
 		icm->set_uuid = icm_icl_set_uuid;
diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index 1333b158a95e..cb8c9c4ae93a 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -1410,6 +1410,10 @@ static struct pci_device_id nhi_ids[] = {
 	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADL_NHI1),
 	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPL_NHI0),
+	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPL_NHI1),
+	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
 
 	/* Any USB4 compliant host */
 	{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_USB4, ~0) },
diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h
index 69083aab2736..f09da5b62233 100644
--- a/drivers/thunderbolt/nhi.h
+++ b/drivers/thunderbolt/nhi.h
@@ -80,6 +80,8 @@ extern const struct tb_nhi_ops icl_nhi_ops;
 #define PCI_DEVICE_ID_INTEL_TGL_NHI1			0x9a1d
 #define PCI_DEVICE_ID_INTEL_TGL_H_NHI0			0x9a1f
 #define PCI_DEVICE_ID_INTEL_TGL_H_NHI1			0x9a21
+#define PCI_DEVICE_ID_INTEL_RPL_NHI0			0xa73e
+#define PCI_DEVICE_ID_INTEL_RPL_NHI1			0xa76d
 
 #define PCI_CLASS_SERIAL_USB_USB4			0x0c0340
 
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 561e1d77240e..244f8cd38b25 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -3133,9 +3133,13 @@ void tb_switch_suspend(struct tb_switch *sw, bool runtime)
 	/*
 	 * Actually only needed for Titan Ridge but for simplicity can be
 	 * done for USB4 device too as CLx is re-enabled at resume.
+	 * CL0s and CL1 are enabled and supported together.
 	 */
-	if (tb_switch_disable_clx(sw, TB_CL0S))
-		tb_sw_warn(sw, "failed to disable CLx on upstream port\n");
+	if (tb_switch_is_clx_enabled(sw, TB_CL1)) {
+		if (tb_switch_disable_clx(sw, TB_CL1))
+			tb_sw_warn(sw, "failed to disable %s on upstream port\n",
+				   tb_switch_clx_name(TB_CL1));
+	}
 
 	err = tb_plug_events_active(sw, false);
 	if (err)
@@ -3426,13 +3430,12 @@ static bool tb_port_clx_supported(struct tb_port *port, enum tb_clx clx)
 	}
 
 	switch (clx) {
-	case TB_CL0S:
-		/* CL0s support requires also CL1 support */
+	case TB_CL1:
+		/* CL0s and CL1 are enabled and supported together */
 		mask = LANE_ADP_CS_0_CL0S_SUPPORT | LANE_ADP_CS_0_CL1_SUPPORT;
 		break;
 
-	/* For now we support only CL0s. Not CL1, CL2 */
-	case TB_CL1:
+	/* For now we support only CL0s and CL1. Not CL2 */
 	case TB_CL2:
 	default:
 		return false;
@@ -3446,18 +3449,18 @@ static bool tb_port_clx_supported(struct tb_port *port, enum tb_clx clx)
 	return !!(val & mask);
 }
 
-static inline bool tb_port_cl0s_supported(struct tb_port *port)
-{
-	return tb_port_clx_supported(port, TB_CL0S);
-}
-
-static int __tb_port_cl0s_set(struct tb_port *port, bool enable)
+static int __tb_port_clx_set(struct tb_port *port, enum tb_clx clx, bool enable)
 {
 	u32 phy, mask;
 	int ret;
 
-	/* To enable CL0s also required to enable CL1 */
-	mask = LANE_ADP_CS_1_CL0S_ENABLE | LANE_ADP_CS_1_CL1_ENABLE;
+	/* CL0s and CL1 are enabled and supported together */
+	if (clx == TB_CL1)
+		mask = LANE_ADP_CS_1_CL0S_ENABLE | LANE_ADP_CS_1_CL1_ENABLE;
+	else
+		/* For now we support only CL0s and CL1. Not CL2 */
+		return -EOPNOTSUPP;
+
 	ret = tb_port_read(port, &phy, TB_CFG_PORT,
 			   port->cap_phy + LANE_ADP_CS_1, 1);
 	if (ret)
@@ -3472,20 +3475,20 @@ static int __tb_port_cl0s_set(struct tb_port *port, bool enable)
 			     port->cap_phy + LANE_ADP_CS_1, 1);
 }
 
-static int tb_port_cl0s_disable(struct tb_port *port)
+static int tb_port_clx_disable(struct tb_port *port, enum tb_clx clx)
 {
-	return __tb_port_cl0s_set(port, false);
+	return __tb_port_clx_set(port, clx, false);
 }
 
-static int tb_port_cl0s_enable(struct tb_port *port)
+static int tb_port_clx_enable(struct tb_port *port, enum tb_clx clx)
 {
-	return __tb_port_cl0s_set(port, true);
+	return __tb_port_clx_set(port, clx, true);
 }
 
-static int tb_switch_enable_cl0s(struct tb_switch *sw)
+static int __tb_switch_enable_clx(struct tb_switch *sw, enum tb_clx clx)
 {
 	struct tb_switch *parent = tb_switch_parent(sw);
-	bool up_cl0s_support, down_cl0s_support;
+	bool up_clx_support, down_clx_support;
 	struct tb_port *up, *down;
 	int ret;
 
@@ -3510,37 +3513,37 @@ static int tb_switch_enable_cl0s(struct tb_switch *sw)
 	up = tb_upstream_port(sw);
 	down = tb_port_at(tb_route(sw), parent);
 
-	up_cl0s_support = tb_port_cl0s_supported(up);
-	down_cl0s_support = tb_port_cl0s_supported(down);
+	up_clx_support = tb_port_clx_supported(up, clx);
+	down_clx_support = tb_port_clx_supported(down, clx);
 
-	tb_port_dbg(up, "CL0s %ssupported\n",
-		    up_cl0s_support ? "" : "not ");
-	tb_port_dbg(down, "CL0s %ssupported\n",
-		    down_cl0s_support ? "" : "not ");
+	tb_port_dbg(up, "%s %ssupported\n", tb_switch_clx_name(clx),
+		    up_clx_support ? "" : "not ");
+	tb_port_dbg(down, "%s %ssupported\n", tb_switch_clx_name(clx),
+		    down_clx_support ? "" : "not ");
 
-	if (!up_cl0s_support || !down_cl0s_support)
+	if (!up_clx_support || !down_clx_support)
 		return -EOPNOTSUPP;
 
-	ret = tb_port_cl0s_enable(up);
+	ret = tb_port_clx_enable(up, clx);
 	if (ret)
 		return ret;
 
-	ret = tb_port_cl0s_enable(down);
+	ret = tb_port_clx_enable(down, clx);
 	if (ret) {
-		tb_port_cl0s_disable(up);
+		tb_port_clx_disable(up, clx);
 		return ret;
 	}
 
 	ret = tb_switch_mask_clx_objections(sw);
 	if (ret) {
-		tb_port_cl0s_disable(up);
-		tb_port_cl0s_disable(down);
+		tb_port_clx_disable(up, clx);
+		tb_port_clx_disable(down, clx);
 		return ret;
 	}
 
-	sw->clx = TB_CL0S;
+	sw->clx = clx;
 
-	tb_port_dbg(up, "CL0s enabled\n");
+	tb_port_dbg(up, "%s enabled\n", tb_switch_clx_name(clx));
 	return 0;
 }
 
@@ -3554,7 +3557,7 @@ static int tb_switch_enable_cl0s(struct tb_switch *sw)
  * to improve performance. CLx is enabled only if both sides of the link
  * support CLx, and if both sides of the link are not configured as two
  * single lane links and only if the link is not inter-domain link. The
- * complete set of conditions is descibed in CM Guide 1.0 section 8.1.
+ * complete set of conditions is described in CM Guide 1.0 section 8.1.
  *
  * Return: Returns 0 on success or an error code on failure.
  */
@@ -3573,15 +3576,16 @@ int tb_switch_enable_clx(struct tb_switch *sw, enum tb_clx clx)
 		return 0;
 
 	switch (clx) {
-	case TB_CL0S:
-		return tb_switch_enable_cl0s(sw);
+	case TB_CL1:
+		/* CL0s and CL1 are enabled and supported together */
+		return __tb_switch_enable_clx(sw, clx);
 
 	default:
 		return -EOPNOTSUPP;
 	}
 }
 
-static int tb_switch_disable_cl0s(struct tb_switch *sw)
+static int __tb_switch_disable_clx(struct tb_switch *sw, enum tb_clx clx)
 {
 	struct tb_switch *parent = tb_switch_parent(sw);
 	struct tb_port *up, *down;
@@ -3603,17 +3607,17 @@ static int tb_switch_disable_cl0s(struct tb_switch *sw)
 
 	up = tb_upstream_port(sw);
 	down = tb_port_at(tb_route(sw), parent);
-	ret = tb_port_cl0s_disable(up);
+	ret = tb_port_clx_disable(up, clx);
 	if (ret)
 		return ret;
 
-	ret = tb_port_cl0s_disable(down);
+	ret = tb_port_clx_disable(down, clx);
 	if (ret)
 		return ret;
 
 	sw->clx = TB_CLX_DISABLE;
 
-	tb_port_dbg(up, "CL0s disabled\n");
+	tb_port_dbg(up, "%s disabled\n", tb_switch_clx_name(clx));
 	return 0;
 }
 
@@ -3630,8 +3634,9 @@ int tb_switch_disable_clx(struct tb_switch *sw, enum tb_clx clx)
 		return 0;
 
 	switch (clx) {
-	case TB_CL0S:
-		return tb_switch_disable_cl0s(sw);
+	case TB_CL1:
+		/* CL0s and CL1 are enabled and supported together */
+		return __tb_switch_disable_clx(sw, clx);
 
 	default:
 		return -EOPNOTSUPP;
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 9a3214fb5038..9853f6c7e81d 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -118,6 +118,13 @@ static void tb_switch_discover_tunnels(struct tb_switch *sw,
 		switch (port->config.type) {
 		case TB_TYPE_DP_HDMI_IN:
 			tunnel = tb_tunnel_discover_dp(tb, port, alloc_hopids);
+			/*
+			 * In case of DP tunnel exists, change host router's
+			 * 1st children TMU mode to HiFi for CL0s to work.
+			 */
+			if (tunnel)
+				tb_switch_enable_tmu_1st_child(tb->root_switch,
+						TB_SWITCH_TMU_RATE_HIFI);
 			break;
 
 		case TB_TYPE_PCIE_DOWN:
@@ -215,7 +222,7 @@ static int tb_enable_tmu(struct tb_switch *sw)
 	int ret;
 
 	/* If it is already enabled in correct mode, don't touch it */
-	if (tb_switch_tmu_hifi_is_enabled(sw, sw->tmu.unidirectional_request))
+	if (tb_switch_tmu_is_enabled(sw, sw->tmu.unidirectional_request))
 		return 0;
 
 	ret = tb_switch_tmu_disable(sw);
@@ -575,6 +582,7 @@ static void tb_scan_port(struct tb_port *port)
 	struct tb_cm *tcm = tb_priv(port->sw->tb);
 	struct tb_port *upstream_port;
 	struct tb_switch *sw;
+	int ret;
 
 	if (tb_is_upstream_port(port))
 		return;
@@ -663,11 +671,24 @@ static void tb_scan_port(struct tb_port *port)
 	tb_switch_lane_bonding_enable(sw);
 	/* Set the link configured */
 	tb_switch_configure_link(sw);
-	if (tb_switch_enable_clx(sw, TB_CL0S))
-		tb_sw_warn(sw, "failed to enable CLx on upstream port\n");
+	/*
+	 * CL0s and CL1 are enabled and supported together.
+	 * Silently ignore CLx enabling in case CLx is not supported.
+	 */
+	ret = tb_switch_enable_clx(sw, TB_CL1);
+	if (ret && ret != -EOPNOTSUPP)
+		tb_sw_warn(sw, "failed to enable %s on upstream port\n",
+			   tb_switch_clx_name(TB_CL1));
 
-	tb_switch_tmu_configure(sw, TB_SWITCH_TMU_RATE_HIFI,
-				tb_switch_is_clx_enabled(sw));
+	if (tb_switch_is_clx_enabled(sw, TB_CL1))
+		/*
+		 * To support highest CLx state, we set router's TMU to
+		 * Normal-Uni mode.
+		 */
+		tb_switch_tmu_configure(sw, TB_SWITCH_TMU_RATE_NORMAL, true);
+	else
+		/* If CLx disabled, configure router's TMU to HiFi-Bidir mode*/
+		tb_switch_tmu_configure(sw, TB_SWITCH_TMU_RATE_HIFI, false);
 
 	if (tb_enable_tmu(sw))
 		tb_sw_warn(sw, "failed to enable TMU\n");
@@ -965,6 +986,12 @@ static void tb_tunnel_dp(struct tb *tb)
 
 	list_add_tail(&tunnel->list, &tcm->tunnel_list);
 	tb_reclaim_usb3_bandwidth(tb, in, out);
+	/*
+	 * In case of DP tunnel exists, change host router's 1st children
+	 * TMU mode to HiFi for CL0s to work.
+	 */
+	tb_switch_enable_tmu_1st_child(tb->root_switch, TB_SWITCH_TMU_RATE_HIFI);
+
 	return;
 
 err_free:
@@ -1407,7 +1434,12 @@ static int tb_start(struct tb *tb)
 		return ret;
 	}
 
-	tb_switch_tmu_configure(tb->root_switch, TB_SWITCH_TMU_RATE_HIFI, false);
+	/*
+	 * To support highest CLx state, we set host router's TMU to
+	 * Normal mode.
+	 */
+	tb_switch_tmu_configure(tb->root_switch, TB_SWITCH_TMU_RATE_NORMAL,
+				false);
 	/* Enable TMU if it is off */
 	tb_switch_tmu_enable(tb->root_switch);
 	/* Full scan to discover devices added before the driver was loaded. */
@@ -1446,19 +1478,31 @@ static int tb_suspend_noirq(struct tb *tb)
 static void tb_restore_children(struct tb_switch *sw)
 {
 	struct tb_port *port;
+	int ret;
 
 	/* No need to restore if the router is already unplugged */
 	if (sw->is_unplugged)
 		return;
 
-	if (tb_switch_enable_clx(sw, TB_CL0S))
-		tb_sw_warn(sw, "failed to re-enable CLx on upstream port\n");
-
 	/*
-	 * tb_switch_tmu_configure() was already called when the switch was
-	 * added before entering system sleep or runtime suspend,
-	 * so no need to call it again before enabling TMU.
+	 * CL0s and CL1 are enabled and supported together.
+	 * Silently ignore CLx re-enabling in case CLx is not supported.
 	 */
+	ret = tb_switch_enable_clx(sw, TB_CL1);
+	if (ret && ret != -EOPNOTSUPP)
+		tb_sw_warn(sw, "failed to re-enable %s on upstream port\n",
+			   tb_switch_clx_name(TB_CL1));
+
+	if (tb_switch_is_clx_enabled(sw, TB_CL1))
+		/*
+		 * To support highest CLx state, we set router's TMU to
+		 * Normal-Uni mode.
+		 */
+		tb_switch_tmu_configure(sw, TB_SWITCH_TMU_RATE_NORMAL, true);
+	else
+		/* If CLx disabled, configure router's TMU to HiFi-Bidir mode*/
+		tb_switch_tmu_configure(sw, TB_SWITCH_TMU_RATE_HIFI, false);
+
 	if (tb_enable_tmu(sw))
 		tb_sw_warn(sw, "failed to restore TMU configuration\n");
 
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index a831faa50f65..5db76de40cc1 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -13,6 +13,7 @@
 #include <linux/pci.h>
 #include <linux/thunderbolt.h>
 #include <linux/uuid.h>
+#include <linux/bitfield.h>
 
 #include "tb_regs.h"
 #include "ctl.h"
@@ -111,7 +112,7 @@ struct tb_switch_tmu {
 
 enum tb_clx {
 	TB_CLX_DISABLE,
-	TB_CL0S,
+	/* CL0s and CL1 are enabled and supported together */
 	TB_CL1,
 	TB_CL2,
 };
@@ -933,46 +934,49 @@ int tb_switch_tmu_enable(struct tb_switch *sw);
 void tb_switch_tmu_configure(struct tb_switch *sw,
 			     enum tb_switch_tmu_rate rate,
 			     bool unidirectional);
+void tb_switch_enable_tmu_1st_child(struct tb_switch *sw,
+				    enum tb_switch_tmu_rate rate);
 /**
- * tb_switch_tmu_hifi_is_enabled() - Checks if the specified TMU mode is enabled
+ * tb_switch_tmu_is_enabled() - Checks if the specified TMU mode is enabled
  * @sw: Router whose TMU mode to check
  * @unidirectional: If uni-directional (bi-directional otherwise)
  *
  * Return true if hardware TMU configuration matches the one passed in
- * as parameter. That is HiFi and either uni-directional or bi-directional.
+ * as parameter. That is HiFi/Normal and either uni-directional or bi-directional.
  */
-static inline bool tb_switch_tmu_hifi_is_enabled(const struct tb_switch *sw,
-						 bool unidirectional)
+static inline bool tb_switch_tmu_is_enabled(const struct tb_switch *sw,
+					    bool unidirectional)
 {
-	return sw->tmu.rate == TB_SWITCH_TMU_RATE_HIFI &&
+	return sw->tmu.rate == sw->tmu.rate_request &&
 	       sw->tmu.unidirectional == unidirectional;
 }
 
+static inline const char *tb_switch_clx_name(enum tb_clx clx)
+{
+	switch (clx) {
+	/* CL0s and CL1 are enabled and supported together */
+	case TB_CL1:
+		return "CL0s/CL1";
+	default:
+		return "unknown";
+	}
+}
+
 int tb_switch_enable_clx(struct tb_switch *sw, enum tb_clx clx);
 int tb_switch_disable_clx(struct tb_switch *sw, enum tb_clx clx);
 
 /**
  * tb_switch_is_clx_enabled() - Checks if the CLx is enabled
- * @sw: Router to check the CLx state for
- *
- * Checks if the CLx is enabled on the router upstream link.
- * Not applicable for a host router.
- */
-static inline bool tb_switch_is_clx_enabled(const struct tb_switch *sw)
-{
-	return sw->clx != TB_CLX_DISABLE;
-}
-
-/**
- * tb_switch_is_cl0s_enabled() - Checks if the CL0s is enabled
- * @sw: Router to check for the CL0s
+ * @sw: Router to check for the CLx
+ * @clx: The CLx state to check for
  *
- * Checks if the CL0s is enabled on the router upstream link.
+ * Checks if the specified CLx is enabled on the router upstream link.
  * Not applicable for a host router.
  */
-static inline bool tb_switch_is_cl0s_enabled(const struct tb_switch *sw)
+static inline bool tb_switch_is_clx_enabled(const struct tb_switch *sw,
+					    enum tb_clx clx)
 {
-	return sw->clx == TB_CL0S;
+	return sw->clx == clx;
 }
 
 /**
diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h
index 6a16f61a72a1..166054110388 100644
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -234,6 +234,7 @@ enum usb4_switch_op {
 
 /* Router TMU configuration */
 #define TMU_RTR_CS_0				0x00
+#define TMU_RTR_CS_0_FREQ_WIND_MASK		GENMASK(26, 16)
 #define TMU_RTR_CS_0_TD				BIT(27)
 #define TMU_RTR_CS_0_UCAP			BIT(30)
 #define TMU_RTR_CS_1				0x01
@@ -244,6 +245,11 @@ enum usb4_switch_op {
 #define TMU_RTR_CS_3_LOCAL_TIME_NS_MASK		GENMASK(15, 0)
 #define TMU_RTR_CS_3_TS_PACKET_INTERVAL_MASK	GENMASK(31, 16)
 #define TMU_RTR_CS_3_TS_PACKET_INTERVAL_SHIFT	16
+#define TMU_RTR_CS_15				0xf
+#define TMU_RTR_CS_15_FREQ_AVG_MASK		GENMASK(5, 0)
+#define TMU_RTR_CS_15_DELAY_AVG_MASK		GENMASK(11, 6)
+#define TMU_RTR_CS_15_OFFSET_AVG_MASK		GENMASK(17, 12)
+#define TMU_RTR_CS_15_ERROR_AVG_MASK		GENMASK(23, 18)
 #define TMU_RTR_CS_22				0x16
 #define TMU_RTR_CS_24				0x18
 #define TMU_RTR_CS_25				0x19
diff --git a/drivers/thunderbolt/tmu.c b/drivers/thunderbolt/tmu.c
index e4a07a26f693..626aca3124b1 100644
--- a/drivers/thunderbolt/tmu.c
+++ b/drivers/thunderbolt/tmu.c
@@ -11,6 +11,55 @@
 
 #include "tb.h"
 
+static int tb_switch_set_tmu_mode_params(struct tb_switch *sw,
+					 enum tb_switch_tmu_rate rate)
+{
+	u32 freq_meas_wind[2] = { 30, 800 };
+	u32 avg_const[2] = { 4, 8 };
+	u32 freq, avg, val;
+	int ret;
+
+	if (rate == TB_SWITCH_TMU_RATE_NORMAL) {
+		freq = freq_meas_wind[0];
+		avg = avg_const[0];
+	} else if (rate == TB_SWITCH_TMU_RATE_HIFI) {
+		freq = freq_meas_wind[1];
+		avg = avg_const[1];
+	} else {
+		return 0;
+	}
+
+	ret = tb_sw_read(sw, &val, TB_CFG_SWITCH,
+			 sw->tmu.cap + TMU_RTR_CS_0, 1);
+	if (ret)
+		return ret;
+
+	val &= ~TMU_RTR_CS_0_FREQ_WIND_MASK;
+	val |= FIELD_PREP(TMU_RTR_CS_0_FREQ_WIND_MASK, freq);
+
+	ret = tb_sw_write(sw, &val, TB_CFG_SWITCH,
+			  sw->tmu.cap + TMU_RTR_CS_0, 1);
+	if (ret)
+		return ret;
+
+	ret = tb_sw_read(sw, &val, TB_CFG_SWITCH,
+			 sw->tmu.cap + TMU_RTR_CS_15, 1);
+	if (ret)
+		return ret;
+
+	val &= ~TMU_RTR_CS_15_FREQ_AVG_MASK &
+		~TMU_RTR_CS_15_DELAY_AVG_MASK &
+		~TMU_RTR_CS_15_OFFSET_AVG_MASK &
+		~TMU_RTR_CS_15_ERROR_AVG_MASK;
+	val |=  FIELD_PREP(TMU_RTR_CS_15_FREQ_AVG_MASK, avg) |
+		FIELD_PREP(TMU_RTR_CS_15_DELAY_AVG_MASK, avg) |
+		FIELD_PREP(TMU_RTR_CS_15_OFFSET_AVG_MASK, avg) |
+		FIELD_PREP(TMU_RTR_CS_15_ERROR_AVG_MASK, avg);
+
+	return tb_sw_write(sw, &val, TB_CFG_SWITCH,
+			   sw->tmu.cap + TMU_RTR_CS_15, 1);
+}
+
 static const char *tb_switch_tmu_mode_name(const struct tb_switch *sw)
 {
 	bool root_switch = !tb_route(sw);
@@ -348,7 +397,7 @@ int tb_switch_tmu_disable(struct tb_switch *sw)
 
 
 	if (tb_route(sw)) {
-		bool unidirectional = tb_switch_tmu_hifi_is_enabled(sw, true);
+		bool unidirectional = sw->tmu.unidirectional;
 		struct tb_switch *parent = tb_switch_parent(sw);
 		struct tb_port *down, *up;
 		int ret;
@@ -359,13 +408,14 @@ int tb_switch_tmu_disable(struct tb_switch *sw)
 		 * In case of uni-directional time sync, TMU handshake is
 		 * initiated by upstream router. In case of bi-directional
 		 * time sync, TMU handshake is initiated by downstream router.
-		 * Therefore, we change the rate to off in the respective
-		 * router.
+		 * We change downstream router's rate to off for both uni/bidir
+		 * cases although it is needed only for the bi-directional mode.
+		 * We avoid changing upstream router's mode since it might
+		 * have another downstream router plugged, that is set to
+		 * uni-directional mode and we don't want to change it's TMU
+		 * mode.
 		 */
-		if (unidirectional)
-			tb_switch_tmu_rate_write(parent, TB_SWITCH_TMU_RATE_OFF);
-		else
-			tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_OFF);
+		tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_OFF);
 
 		tb_port_tmu_time_sync_disable(up);
 		ret = tb_port_tmu_time_sync_disable(down);
@@ -411,6 +461,7 @@ static void __tb_switch_tmu_off(struct tb_switch *sw, bool unidirectional)
 	else
 		tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_OFF);
 
+	tb_switch_set_tmu_mode_params(sw, sw->tmu.rate);
 	tb_port_tmu_unidirectional_disable(down);
 	tb_port_tmu_unidirectional_disable(up);
 }
@@ -492,7 +543,11 @@ static int __tb_switch_tmu_enable_unidirectional(struct tb_switch *sw)
 
 	up = tb_upstream_port(sw);
 	down = tb_port_at(tb_route(sw), parent);
-	ret = tb_switch_tmu_rate_write(parent, TB_SWITCH_TMU_RATE_HIFI);
+	ret = tb_switch_tmu_rate_write(parent, sw->tmu.rate_request);
+	if (ret)
+		return ret;
+
+	ret = tb_switch_set_tmu_mode_params(sw, sw->tmu.rate_request);
 	if (ret)
 		return ret;
 
@@ -519,7 +574,83 @@ out:
 	return ret;
 }
 
-static int tb_switch_tmu_hifi_enable(struct tb_switch *sw)
+static void __tb_switch_tmu_change_mode_prev(struct tb_switch *sw)
+{
+	struct tb_switch *parent = tb_switch_parent(sw);
+	struct tb_port *down, *up;
+
+	down = tb_port_at(tb_route(sw), parent);
+	up = tb_upstream_port(sw);
+	/*
+	 * In case of any failure in one of the steps when change mode,
+	 * get back to the TMU configurations in previous mode.
+	 * In case of additional failures in the functions below,
+	 * ignore them since the caller shall already report a failure.
+	 */
+	tb_port_tmu_set_unidirectional(down, sw->tmu.unidirectional);
+	if (sw->tmu.unidirectional_request)
+		tb_switch_tmu_rate_write(parent, sw->tmu.rate);
+	else
+		tb_switch_tmu_rate_write(sw, sw->tmu.rate);
+
+	tb_switch_set_tmu_mode_params(sw, sw->tmu.rate);
+	tb_port_tmu_set_unidirectional(up, sw->tmu.unidirectional);
+}
+
+static int __tb_switch_tmu_change_mode(struct tb_switch *sw)
+{
+	struct tb_switch *parent = tb_switch_parent(sw);
+	struct tb_port *up, *down;
+	int ret;
+
+	up = tb_upstream_port(sw);
+	down = tb_port_at(tb_route(sw), parent);
+	ret = tb_port_tmu_set_unidirectional(down, sw->tmu.unidirectional_request);
+	if (ret)
+		goto out;
+
+	if (sw->tmu.unidirectional_request)
+		ret = tb_switch_tmu_rate_write(parent, sw->tmu.rate_request);
+	else
+		ret = tb_switch_tmu_rate_write(sw, sw->tmu.rate_request);
+	if (ret)
+		return ret;
+
+	ret = tb_switch_set_tmu_mode_params(sw, sw->tmu.rate_request);
+	if (ret)
+		return ret;
+
+	ret = tb_port_tmu_set_unidirectional(up, sw->tmu.unidirectional_request);
+	if (ret)
+		goto out;
+
+	ret = tb_port_tmu_time_sync_enable(down);
+	if (ret)
+		goto out;
+
+	ret = tb_port_tmu_time_sync_enable(up);
+	if (ret)
+		goto out;
+
+	return 0;
+
+out:
+	__tb_switch_tmu_change_mode_prev(sw);
+	return ret;
+}
+
+/**
+ * tb_switch_tmu_enable() - Enable TMU on a router
+ * @sw: Router whose TMU to enable
+ *
+ * Enables TMU of a router to be in uni-directional Normal/HiFi
+ * or bi-directional HiFi mode. Calling tb_switch_tmu_configure() is required
+ * before calling this function, to select the mode Normal/HiFi and
+ * directionality (uni-directional/bi-directional).
+ * In HiFi mode all tunneling should work. In Normal mode, DP tunneling can't
+ * work. Uni-directional mode is required for CLx (Link Low-Power) to work.
+ */
+int tb_switch_tmu_enable(struct tb_switch *sw)
 {
 	bool unidirectional = sw->tmu.unidirectional_request;
 	int ret;
@@ -535,12 +666,15 @@ static int tb_switch_tmu_hifi_enable(struct tb_switch *sw)
 	if (!tb_switch_is_clx_supported(sw))
 		return 0;
 
-	if (tb_switch_tmu_hifi_is_enabled(sw, sw->tmu.unidirectional_request))
+	if (tb_switch_tmu_is_enabled(sw, sw->tmu.unidirectional_request))
 		return 0;
 
 	if (tb_switch_is_titan_ridge(sw) && unidirectional) {
-		/* Titan Ridge supports only CL0s */
-		if (!tb_switch_is_cl0s_enabled(sw))
+		/*
+		 * Titan Ridge supports CL0s and CL1 only. CL0s and CL1 are
+		 * enabled and supported together.
+		 */
+		if (!tb_switch_is_clx_enabled(sw, TB_CL1))
 			return -EOPNOTSUPP;
 
 		ret = tb_switch_tmu_objection_mask(sw);
@@ -557,7 +691,11 @@ static int tb_switch_tmu_hifi_enable(struct tb_switch *sw)
 		return ret;
 
 	if (tb_route(sw)) {
-		/* The used mode changes are from OFF to HiFi-Uni/HiFi-BiDir */
+		/*
+		 * The used mode changes are from OFF to
+		 * HiFi-Uni/HiFi-BiDir/Normal-Uni or from Normal-Uni to
+		 * HiFi-Uni.
+		 */
 		if (sw->tmu.rate == TB_SWITCH_TMU_RATE_OFF) {
 			if (unidirectional)
 				ret = __tb_switch_tmu_enable_unidirectional(sw);
@@ -565,6 +703,10 @@ static int tb_switch_tmu_hifi_enable(struct tb_switch *sw)
 				ret = __tb_switch_tmu_enable_bidirectional(sw);
 			if (ret)
 				return ret;
+		} else if (sw->tmu.rate == TB_SWITCH_TMU_RATE_NORMAL) {
+			ret = __tb_switch_tmu_change_mode(sw);
+			if (ret)
+				return ret;
 		}
 		sw->tmu.unidirectional = unidirectional;
 	} else {
@@ -574,39 +716,21 @@ static int tb_switch_tmu_hifi_enable(struct tb_switch *sw)
 		 * of the child node - see above.
 		 * Here only the host router' rate configuration is written.
 		 */
-		ret = tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_HIFI);
+		ret = tb_switch_tmu_rate_write(sw, sw->tmu.rate_request);
 		if (ret)
 			return ret;
 	}
 
-	sw->tmu.rate = TB_SWITCH_TMU_RATE_HIFI;
+	sw->tmu.rate = sw->tmu.rate_request;
 
 	tb_sw_dbg(sw, "TMU: mode set to: %s\n", tb_switch_tmu_mode_name(sw));
 	return tb_switch_tmu_set_time_disruption(sw, false);
 }
 
 /**
- * tb_switch_tmu_enable() - Enable TMU on a router
- * @sw: Router whose TMU to enable
- *
- * Enables TMU of a router to be in uni-directional or bi-directional HiFi mode.
- * Calling tb_switch_tmu_configure() is required before calling this function,
- * to select the mode HiFi and directionality (uni-directional/bi-directional).
- * In both modes all tunneling should work. Uni-directional mode is required for
- * CLx (Link Low-Power) to work.
- */
-int tb_switch_tmu_enable(struct tb_switch *sw)
-{
-	if (sw->tmu.rate_request == TB_SWITCH_TMU_RATE_NORMAL)
-		return -EOPNOTSUPP;
-
-	return tb_switch_tmu_hifi_enable(sw);
-}
-
-/**
  * tb_switch_tmu_configure() - Configure the TMU rate and directionality
  * @sw: Router whose mode to change
- * @rate: Rate to configure Off/LowRes/HiFi
+ * @rate: Rate to configure Off/Normal/HiFi
  * @unidirectional: If uni-directional (bi-directional otherwise)
  *
  * Selects the rate of the TMU and directionality (uni-directional or
@@ -618,3 +742,32 @@ void tb_switch_tmu_configure(struct tb_switch *sw,
 	sw->tmu.unidirectional_request = unidirectional;
 	sw->tmu.rate_request = rate;
 }
+
+static int tb_switch_tmu_config_enable(struct device *dev, void *rate)
+{
+	if (tb_is_switch(dev)) {
+		struct tb_switch *sw = tb_to_switch(dev);
+
+		tb_switch_tmu_configure(sw, *(enum tb_switch_tmu_rate *)rate,
+					tb_switch_is_clx_enabled(sw, TB_CL1));
+		if (tb_switch_tmu_enable(sw))
+			tb_sw_dbg(sw, "fail switching TMU mode for 1st depth router\n");
+	}
+
+	return 0;
+}
+
+/**
+ * tb_switch_enable_tmu_1st_child - Configure and enable TMU for 1st chidren
+ * @sw: The router to configure and enable it's children TMU
+ * @rate: Rate of the TMU to configure the router's chidren to
+ *
+ * Configures and enables the TMU mode of 1st depth children of the specified
+ * router to the specified rate.
+ */
+void tb_switch_enable_tmu_1st_child(struct tb_switch *sw,
+				    enum tb_switch_tmu_rate rate)
+{
+	device_for_each_child(&sw->dev, &rate,
+			      tb_switch_tmu_config_enable);
+}