Merge tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into next

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty / serial driver pull request for 3.16-rc1.

  A variety of different serial driver fixes and updates and additions,
  nothing huge, and no real major core tty changes at all.

  All have been in linux-next for a while"

* tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (84 commits)
  Revert "serial: imx: remove the DMA wait queue"
  serial: kgdb_nmi: Improve console integration with KDB I/O
  serial: kgdb_nmi: Switch from tasklets to real timers
  serial: kgdb_nmi: Use container_of() to locate private data
  serial: cpm_uart: No LF conversion in put_poll_char()
  serial: sirf: Fix compilation failure
  console: Remove superfluous readonly check
  console: Use explicit pointer type for vc_uni_pagedir* fields
  vgacon: Fix & cleanup refcounting
  ARM: tty: Move HVC DCC assembly to arch/arm
  tty/hvc/hvc_console: Fix wakeup of HVC thread on hvc_kick()
  drivers/tty/n_hdlc.c: replace kmalloc/memset by kzalloc
  vt: emulate 8- and 24-bit colour codes.
  printk/of_serial: fix serial console cessation part way through boot.
  serial: 8250_dma: check the result of TX buffer mapping
  serial: uart: add hw flow control support configuration
  tty/serial: at91: add interrupts for modem control lines
  tty/serial: at91: use mctrl_gpio helpers
  tty/serial: Add GPIOLIB helpers for controlling modem lines
  ARM: at91: gpio: implement get_direction
  ...

6 files changed, 133 insertions, 139 deletions

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 2d4bd3929e50..27f7ad6b74c1 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1926,13 +1926,8 @@ static void serial8250_put_poll_char(struct uart_port *port,
 	wait_for_xmitr(up, BOTH_EMPTY);
 	/*
 	 *	Send the character out.
-	 *	If a LF, also do CR...
 	 */
 	serial_port_out(port, UART_TX, c);
-	if (c == 10) {
-		wait_for_xmitr(up, BOTH_EMPTY);
-		serial_port_out(port, UART_TX, 13);
-	}
 
 	/*
 	 *	Finally, wait for transmitter to become empty
@@ -2338,9 +2333,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * the trigger, or the MCR RTS bit is cleared.  In the case where
 	 * the remote UART is not using CTS auto flow control, we must
 	 * have sufficient FIFO entries for the latency of the remote
-	 * UART to respond.  IOW, at least 32 bytes of FIFO.
+	 * UART to respond.  IOW, at least 32 bytes of FIFO. Also enable
+	 * AFE if hw flow control is supported
 	 */
-	if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) {
+	if ((up->capabilities & UART_CAP_AFE && (port->fifosize >= 32)) ||
+	    (port->flags & UPF_HARD_FLOW)) {
 		up->mcr &= ~UART_MCR_AFE;
 		if (termios->c_cflag & CRTSCTS)
 			up->mcr |= UART_MCR_AFE;
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index ab9096dc3849..148ffe4c232f 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -192,21 +192,28 @@ int serial8250_request_dma(struct uart_8250_port *p)
 
 	dma->rx_buf = dma_alloc_coherent(dma->rxchan->device->dev, dma->rx_size,
 					&dma->rx_addr, GFP_KERNEL);
-	if (!dma->rx_buf) {
-		dma_release_channel(dma->rxchan);
-		dma_release_channel(dma->txchan);
-		return -ENOMEM;
-	}
+	if (!dma->rx_buf)
+		goto err;
 
 	/* TX buffer */
 	dma->tx_addr = dma_map_single(dma->txchan->device->dev,
 					p->port.state->xmit.buf,
 					UART_XMIT_SIZE,
 					DMA_TO_DEVICE);
+	if (dma_mapping_error(dma->txchan->device->dev, dma->tx_addr)) {
+		dma_free_coherent(dma->rxchan->device->dev, dma->rx_size,
+				  dma->rx_buf, dma->rx_addr);
+		goto err;
+	}
 
 	dev_dbg_ratelimited(p->port.dev, "got both dma channels\n");
 
 	return 0;
+err:
+	dma_release_channel(dma->rxchan);
+	dma_release_channel(dma->txchan);
+
+	return -ENOMEM;
 }
 EXPORT_SYMBOL_GPL(serial8250_request_dma);
 
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index ed3113576740..51b307aab75e 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -62,6 +62,70 @@ struct dw8250_data {
 	struct uart_8250_dma	dma;
 };
 
+struct dw8250_acpi_desc {
+	void (*set_termios)(struct uart_port *p, struct ktermios *termios,
+			    struct ktermios *old);
+};
+
+#define BYT_PRV_CLK			0x800
+#define BYT_PRV_CLK_EN			(1 << 0)
+#define BYT_PRV_CLK_M_VAL_SHIFT		1
+#define BYT_PRV_CLK_N_VAL_SHIFT		16
+#define BYT_PRV_CLK_UPDATE		(1 << 31)
+
+static void byt_set_termios(struct uart_port *p, struct ktermios *termios,
+			    struct ktermios *old)
+{
+	unsigned int baud = tty_termios_baud_rate(termios);
+	unsigned int m, n;
+	u32 reg;
+
+	/*
+	* For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the
+	* dividers must be adjusted.
+	*
+	* uartclk = (m / n) * 100 MHz, where m <= n
+	*/
+	switch (baud) {
+	case 500000:
+	case 1000000:
+	case 2000000:
+	case 4000000:
+		m = 64;
+		n = 100;
+		p->uartclk = 64000000;
+		break;
+	case 3500000:
+		m = 56;
+		n = 100;
+		p->uartclk = 56000000;
+		break;
+	case 1500000:
+	case 3000000:
+		m = 48;
+		n = 100;
+		p->uartclk = 48000000;
+		break;
+	case 2500000:
+		m = 40;
+		n = 100;
+		p->uartclk = 40000000;
+		break;
+	default:
+		m = 2304;
+		n = 3125;
+		p->uartclk = 73728000;
+	}
+
+	/* Reset the clock */
+	reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT);
+	writel(reg, p->membase + BYT_PRV_CLK);
+	reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
+	writel(reg, p->membase + BYT_PRV_CLK);
+
+	serial8250_do_set_termios(p, termios, old);
+}
+
 static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
 {
 	struct dw8250_data *d = p->private_data;
@@ -278,6 +342,7 @@ static int dw8250_probe_acpi(struct uart_8250_port *up,
 {
 	const struct acpi_device_id *id;
 	struct uart_port *p = &up->port;
+	struct dw8250_acpi_desc *acpi_desc;
 
 	dw8250_setup_port(up);
 
@@ -290,14 +355,18 @@ static int dw8250_probe_acpi(struct uart_8250_port *up,
 	p->serial_out = dw8250_serial_out32;
 	p->regshift = 2;
 
-	if (!p->uartclk)
-		p->uartclk = (unsigned int)id->driver_data;
-
 	up->dma = &data->dma;
 
 	up->dma->rxconf.src_maxburst = p->fifosize / 4;
 	up->dma->txconf.dst_maxburst = p->fifosize / 4;
 
+	acpi_desc = (struct dw8250_acpi_desc *)id->driver_data;
+	if (!acpi_desc)
+		return 0;
+
+	if (acpi_desc->set_termios)
+		p->set_termios = acpi_desc->set_termios;
+
 	return 0;
 }
 
@@ -445,12 +514,16 @@ static const struct of_device_id dw8250_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, dw8250_of_match);
 
+static struct dw8250_acpi_desc byt_8250_desc = {
+	.set_termios = byt_set_termios,
+};
+
 static const struct acpi_device_id dw8250_acpi_match[] = {
 	{ "INT33C4", 0 },
 	{ "INT33C5", 0 },
 	{ "INT3434", 0 },
 	{ "INT3435", 0 },
-	{ "80860F0A", 0 },
+	{ "80860F0A", (kernel_ulong_t)&byt_8250_desc},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index c100d6343d50..cfef801a49d4 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -35,18 +35,8 @@
 #include <linux/serial_8250.h>
 #include <asm/io.h>
 #include <asm/serial.h>
-#ifdef CONFIG_FIX_EARLYCON_MEM
-#include <asm/pgtable.h>
-#include <asm/fixmap.h>
-#endif
 
-struct early_serial8250_device {
-	struct uart_port port;
-	char options[16];		/* e.g., 115200n8 */
-	unsigned int baud;
-};
-
-static struct early_serial8250_device early_device;
+static struct earlycon_device *early_device;
 
 unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset)
 {
@@ -100,7 +90,7 @@ static void __init serial_putc(struct uart_port *port, int c)
 static void __init early_serial8250_write(struct console *console,
 					const char *s, unsigned int count)
 {
-	struct uart_port *port = &early_device.port;
+	struct uart_port *port = &early_device->port;
 	unsigned int ier;
 
 	/* Save the IER and disable interrupts */
@@ -129,7 +119,7 @@ static unsigned int __init probe_baud(struct uart_port *port)
 	return (port->uartclk / 16) / quot;
 }
 
-static void __init init_port(struct early_serial8250_device *device)
+static void __init init_port(struct earlycon_device *device)
 {
 	struct uart_port *port = &device->port;
 	unsigned int divisor;
@@ -148,128 +138,42 @@ static void __init init_port(struct early_serial8250_device *device)
 	serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
 }
 
-static int __init parse_options(struct early_serial8250_device *device,
-								char *options)
+static int __init early_serial8250_setup(struct earlycon_device *device,
+					 const char *options)
 {
-	struct uart_port *port = &device->port;
-	int mmio, mmio32, length;
-
-	if (!options)
-		return -ENODEV;
-
-	port->uartclk = BASE_BAUD * 16;
-
-	mmio = !strncmp(options, "mmio,", 5);
-	mmio32 = !strncmp(options, "mmio32,", 7);
-	if (mmio || mmio32) {
-		port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
-		port->mapbase = simple_strtoul(options + (mmio ? 5 : 7),
-					       &options, 0);
-		if (mmio32)
-			port->regshift = 2;
-#ifdef CONFIG_FIX_EARLYCON_MEM
-		set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
-					port->mapbase & PAGE_MASK);
-		port->membase =
-			(void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
-		port->membase += port->mapbase & ~PAGE_MASK;
-#else
-		port->membase = ioremap_nocache(port->mapbase, 64);
-		if (!port->membase) {
-			printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
-				__func__,
-			       (unsigned long long) port->mapbase);
-			return -ENOMEM;
-		}
-#endif
-	} else if (!strncmp(options, "io,", 3)) {
-		port->iotype = UPIO_PORT;
-		port->iobase = simple_strtoul(options + 3, &options, 0);
-		mmio = 0;
-	} else
-		return -EINVAL;
-
-	options = strchr(options, ',');
-	if (options) {
-		options++;
-		device->baud = simple_strtoul(options, NULL, 0);
-		length = min(strcspn(options, " ") + 1,
-			     (size_t)(sizeof(device->options)));
-		strlcpy(device->options, options, length);
-	} else {
-		device->baud = probe_baud(port);
-		snprintf(device->options, sizeof(device->options), "%u",
-			device->baud);
-	}
-
-	if (mmio || mmio32)
-		printk(KERN_INFO
-		       "Early serial console at MMIO%s 0x%llx (options '%s')\n",
-			mmio32 ? "32" : "",
-			(unsigned long long)port->mapbase,
-			device->options);
-	else
-		printk(KERN_INFO
-		      "Early serial console at I/O port 0x%lx (options '%s')\n",
-			port->iobase,
-			device->options);
-
-	return 0;
-}
-
-static struct console early_serial8250_console __initdata = {
-	.name	= "uart",
-	.write	= early_serial8250_write,
-	.flags	= CON_PRINTBUFFER | CON_BOOT,
-	.index	= -1,
-};
-
-static int __init early_serial8250_setup(char *options)
-{
-	struct early_serial8250_device *device = &early_device;
-	int err;
-
-	if (device->port.membase || device->port.iobase)
+	if (!(device->port.membase || device->port.iobase))
 		return 0;
 
-	err = parse_options(device, options);
-	if (err < 0)
-		return err;
+	if (!device->baud)
+		device->baud = probe_baud(&device->port);
 
 	init_port(device);
+
+	early_device = device;
+	device->con->write = early_serial8250_write;
 	return 0;
 }
+EARLYCON_DECLARE(uart8250, early_serial8250_setup);
+EARLYCON_DECLARE(uart, early_serial8250_setup);
 
 int __init setup_early_serial8250_console(char *cmdline)
 {
-	char *options;
-	int err;
+	char match[] = "uart8250";
 
-	options = strstr(cmdline, "uart8250,");
-	if (!options) {
-		options = strstr(cmdline, "uart,");
-		if (!options)
-			return 0;
-	}
+	if (cmdline && cmdline[4] == ',')
+		match[4] = '\0';
 
-	options = strchr(cmdline, ',') + 1;
-	err = early_serial8250_setup(options);
-	if (err < 0)
-		return err;
-
-	register_console(&early_serial8250_console);
-
-	return 0;
+	return setup_earlycon(cmdline, match, early_serial8250_setup);
 }
 
 int serial8250_find_port_for_earlycon(void)
 {
-	struct early_serial8250_device *device = &early_device;
-	struct uart_port *port = &device->port;
+	struct earlycon_device *device = early_device;
+	struct uart_port *port = device ? &device->port : NULL;
 	int line;
 	int ret;
 
-	if (!device->port.membase && !device->port.iobase)
+	if (!port || (!port->membase && !port->iobase))
 		return -ENODEV;
 
 	line = serial8250_find_port(port);
@@ -284,5 +188,3 @@ int serial8250_find_port_for_earlycon(void)
 
 	return ret;
 }
-
-early_param("earlycon", setup_early_serial8250_console);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index b14bcba96c25..33137b3ba94d 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1753,6 +1753,8 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_VENDOR_ID_ADVANTECH		0x13fe
 #define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
 #define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
+#define PCI_DEVICE_ID_ADVANTECH_PCI3618	0x3618
+#define PCI_DEVICE_ID_ADVANTECH_PCIf618	0xf618
 #define PCI_DEVICE_ID_TITAN_200I	0x8028
 #define PCI_DEVICE_ID_TITAN_400I	0x8048
 #define PCI_DEVICE_ID_TITAN_800I	0x8088
@@ -1778,6 +1780,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_WCH_CH352_2S	0x3253
 #define PCI_DEVICE_ID_WCH_CH353_4S	0x3453
 #define PCI_DEVICE_ID_WCH_CH353_2S1PF	0x5046
+#define PCI_DEVICE_ID_WCH_CH353_1S1P	0x5053
 #define PCI_DEVICE_ID_WCH_CH353_2S1P	0x7053
 #define PCI_VENDOR_ID_AGESTAR		0x5372
 #define PCI_DEVICE_ID_AGESTAR_9375	0x6872
@@ -2410,6 +2413,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_omegapci_setup,
 	},
+	/* WCH CH353 1S1P card (16550 clone) */
+	{
+		.vendor         = PCI_VENDOR_ID_WCH,
+		.device         = PCI_DEVICE_ID_WCH_CH353_1S1P,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch353_setup,
+	},
 	/* WCH CH353 2S1P card (16550 clone) */
 	{
 		.vendor         = PCI_VENDOR_ID_WCH,
@@ -3526,6 +3537,7 @@ static const struct pci_device_id blacklist[] = {
 
 	/* multi-io cards handled by parport_serial */
 	{ PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
+	{ PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
 };
 
 /*
@@ -3880,6 +3892,13 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
 		PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
 		pbn_b2_8_921600 },
+	/* Advantech also use 0x3618 and 0xf618 */
+	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3618,
+		PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCIf618,
+		PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
 	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
 		PCI_SUBVENDOR_ID_CONNECT_TECH,
 		PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 23329918f229..349ee598b34c 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -61,6 +61,7 @@ config SERIAL_8250_CONSOLE
 	bool "Console on 8250/16550 and compatible serial port"
 	depends on SERIAL_8250=y
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
 	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
@@ -90,11 +91,6 @@ config SERIAL_8250_CONSOLE
 
 	  If unsure, say N.
 
-config FIX_EARLYCON_MEM
-	bool
-	depends on X86
-	default y
-
 config SERIAL_8250_GSC
 	tristate
 	depends on SERIAL_8250 && GSC