Merge tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of TTY and Serial driver updates for 6.1-rc1.

  Lots of cleanups in here, no real new functionality this time around,
  with the diffstat being that we removed more lines than we added!

  Included in here are:

   - termios unification cleanups from Al Viro, it's nice to finally get
     this work done

   - tty serial transmit cleanups in various drivers in preparation for
     more cleanup and unification in future releases (that work was not
     ready for this release)

   - n_gsm fixes and updates

   - ktermios cleanups and code reductions

   - dt bindings json conversions and updates for new devices

   - some serial driver updates for new devices

   - lots of other tiny cleanups and janitorial stuff. Full details in
     the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
  serial: cpm_uart: Don't request IRQ too early for console port
  tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
  tty: serial: unify TX space reads under altera_jtaguart_tx_space()
  tty: serial: use FIELD_GET() in lqasc_tx_ready()
  tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
  tty: serial: allow pxa.c to be COMPILE_TESTed
  serial: stm32: Fix unused-variable warning
  tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
  serial: 8250: Fix restoring termios speed after suspend
  serial: Deassert Transmit Enable on probe in driver-specific way
  serial: 8250_dma: Convert to use uart_xmit_advance()
  serial: 8250_omap: Convert to use uart_xmit_advance()
  MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
  serial: stm32: Deassert Transmit Enable on ->rs485_config()
  serial: ar933x: Deassert Transmit Enable on ->rs485_config()
  tty: serial: atmel: Use FIELD_PREP/FIELD_GET
  tty: serial: atmel: Make the driver aware of the existence of GCLK
  tty: serial: atmel: Only divide Clock Divisor if the IP is USART
  tty: serial: atmel: Separate mode clearing between UART and USART
  dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
  ...

1 files changed, 7 insertions, 11 deletions

diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 8b749ed557c6..82f2790de28d 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -175,7 +175,7 @@ static void altera_uart_break_ctl(struct uart_port *port, int break_state)
 
 static void altera_uart_set_termios(struct uart_port *port,
 				    struct ktermios *termios,
-				    struct ktermios *old)
+				    const struct ktermios *old)
 {
 	unsigned long flags;
 	unsigned int baud, baudclk;
@@ -199,9 +199,8 @@ static void altera_uart_set_termios(struct uart_port *port,
 	 */
 }
 
-static void altera_uart_rx_chars(struct altera_uart *pp)
+static void altera_uart_rx_chars(struct uart_port *port)
 {
-	struct uart_port *port = &pp->port;
 	unsigned char ch, flag;
 	unsigned short status;
 
@@ -246,9 +245,8 @@ static void altera_uart_rx_chars(struct altera_uart *pp)
 	tty_flip_buffer_push(&port->state->port);
 }
 
-static void altera_uart_tx_chars(struct altera_uart *pp)
+static void altera_uart_tx_chars(struct uart_port *port)
 {
-	struct uart_port *port = &pp->port;
 	struct circ_buf *xmit = &port->state->xmit;
 
 	if (port->x_char) {
@@ -272,10 +270,8 @@ static void altera_uart_tx_chars(struct altera_uart *pp)
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 
-	if (xmit->head == xmit->tail) {
-		pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
-		altera_uart_update_ctrl_reg(pp);
-	}
+	if (uart_circ_empty(xmit))
+		altera_uart_stop_tx(port);
 }
 
 static irqreturn_t altera_uart_interrupt(int irq, void *data)
@@ -288,9 +284,9 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
 
 	spin_lock(&port->lock);
 	if (isr & ALTERA_UART_STATUS_RRDY_MSK)
-		altera_uart_rx_chars(pp);
+		altera_uart_rx_chars(port);
 	if (isr & ALTERA_UART_STATUS_TRDY_MSK)
-		altera_uart_tx_chars(pp);
+		altera_uart_tx_chars(port);
 	spin_unlock(&port->lock);
 
 	return IRQ_RETVAL(isr);