serial: stm32: add support of TX FIFO threshold

Adds the support of TX FIFO threshold in order to improve the TX FIFO
management:
- TX FIFO threshold irq enabling (instead of relying on tx empty / fifo
  not full irq that generates one irq/char)
- TXCFG is set to half fifo size (e.g. 16/2 = 8 data for a 16 data depth
  FIFO)
- irq rate may be reduced by up to 1/TXCFG,  e.g. 1 over 8 with current
  TXCFG setting.

Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 13 insertions, 0 deletions

diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index fcd01feeabec..a5984463e113 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -27,6 +27,7 @@ struct stm32_usart_config {
 	bool has_7bits_data;
 	bool has_wakeup;
 	bool has_fifo;
+	int fifosize;
 };
 
 struct stm32_usart_info {
@@ -54,6 +55,7 @@ struct stm32_usart_info stm32f4_info = {
 	.cfg = {
 		.uart_enable_bit = 13,
 		.has_7bits_data = false,
+		.fifosize = 1,
 	}
 };
 
@@ -74,6 +76,7 @@ struct stm32_usart_info stm32f7_info = {
 	.cfg = {
 		.uart_enable_bit = 0,
 		.has_7bits_data = true,
+		.fifosize = 1,
 	}
 };
 
@@ -96,6 +99,7 @@ struct stm32_usart_info stm32h7_info = {
 		.has_7bits_data = true,
 		.has_wakeup = true,
 		.has_fifo = true,
+		.fifosize = 16,
 	}
 };
 
@@ -204,6 +208,15 @@ struct stm32_usart_info stm32h7_info = {
 #define USART_CR3_WUS_MASK	GENMASK(21, 20)	/* H7 */
 #define USART_CR3_WUS_START_BIT	BIT(21)		/* H7 */
 #define USART_CR3_WUFIE		BIT(22)		/* H7 */
+#define USART_CR3_TXFTIE	BIT(23)		/* H7 */
+#define USART_CR3_TCBGTIE	BIT(24)		/* H7 */
+#define USART_CR3_RXFTCFG	GENMASK(27, 25)	/* H7 */
+#define USART_CR3_RXFTIE	BIT(28)		/* H7 */
+#define USART_CR3_TXFTCFG_MASK	GENMASK(31, 29)	/* H7 */
+#define USART_CR3_TXFTCFG_SHIFT	29		/* H7 */
+
+/* TX FIFO threashold set to half of its depth */
+#define USART_CR3_TXFTCFG_HALF	0x2
 
 /* USART_GTPR */
 #define USART_GTPR_PSC_MASK	GENMASK(7, 0)