Merge branch 'for-next' of git://github.com/rydberg/linux into next

Pull in changes from Henrik: "a trivial MT documentation fix".

71 files changed, 1630 insertions, 1362 deletions

diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index fc700342d43f..083710e02367 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1798,19 +1798,7 @@ static struct platform_driver amiga_serial_driver = {
 	},
 };
 
-static int __init amiga_serial_init(void)
-{
-	return platform_driver_probe(&amiga_serial_driver, amiga_serial_probe);
-}
-
-module_init(amiga_serial_init);
-
-static void __exit amiga_serial_exit(void)
-{
-	platform_driver_unregister(&amiga_serial_driver);
-}
-
-module_exit(amiga_serial_exit);
+module_platform_driver_probe(amiga_serial_driver, amiga_serial_probe);
 
 
 #if defined(CONFIG_SERIAL_CONSOLE) && !defined(MODULE)
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index 345bd0e0884e..33f83fee9fae 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -1124,14 +1124,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 					readl(&info->u.cyz.ch_ctrl->rs_status);
 				if (dcd & C_RS_DCD)
 					wake_up_interruptible(&info->port.open_wait);
-				else {
-					struct tty_struct *tty;
-					tty = tty_port_tty_get(&info->port);
-					if (tty) {
-						tty_hangup(tty);
-						tty_kref_put(tty);
-					}
-				}
+				else
+					tty_port_tty_hangup(&info->port, false);
 			}
 			break;
 		case C_CM_MCTS:
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index ed92622b8949..9bffcec5ad82 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -472,13 +472,9 @@ static void ehv_bc_tx_dequeue(struct ehv_bc_data *bc)
 static irqreturn_t ehv_bc_tty_tx_isr(int irq, void *data)
 {
 	struct ehv_bc_data *bc = data;
-	struct tty_struct *ttys = tty_port_tty_get(&bc->port);
 
 	ehv_bc_tx_dequeue(bc);
-	if (ttys) {
-		tty_wakeup(ttys);
-		tty_kref_put(ttys);
-	}
+	tty_port_tty_wakeup(&bc->port);
 
 	return IRQ_HANDLED;
 }
@@ -863,6 +859,7 @@ error:
  */
 static void __exit ehv_bc_exit(void)
 {
+	platform_driver_unregister(&ehv_bc_tty_driver);
 	tty_unregister_driver(ehv_bc_driver);
 	put_tty_driver(ehv_bc_driver);
 	kfree(bcs);
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index ef95a154854a..41901997c0d6 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -861,7 +861,6 @@ static void hvsi_write_worker(struct work_struct *work)
 {
 	struct hvsi_struct *hp =
 		container_of(work, struct hvsi_struct, writer.work);
-	struct tty_struct *tty;
 	unsigned long flags;
 #ifdef DEBUG
 	static long start_j = 0;
@@ -895,11 +894,7 @@ static void hvsi_write_worker(struct work_struct *work)
 		start_j = 0;
 #endif /* DEBUG */
 		wake_up_all(&hp->emptyq);
-		tty = tty_port_tty_get(&hp->port);
-		if (tty) {
-			tty_wakeup(tty);
-			tty_kref_put(tty);
-		}
+		tty_port_tty_wakeup(&hp->port);
 	}
 
 out:
diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c
index 97a511f4185d..2c14842541dd 100644
--- a/drivers/tty/ipwireless/hardware.c
+++ b/drivers/tty/ipwireless/hardware.c
@@ -1732,8 +1732,7 @@ void ipwireless_hardware_free(struct ipw_hardware *hw)
 	flush_work(&hw->work_rx);
 
 	for (i = 0; i < NL_NUM_OF_ADDRESSES; i++)
-		if (hw->packet_assembler[i] != NULL)
-			kfree(hw->packet_assembler[i]);
+		kfree(hw->packet_assembler[i]);
 
 	for (i = 0; i < NL_NUM_OF_PRIORITIES; i++)
 		list_for_each_entry_safe(tp, tq, &hw->tx_queue[i], queue) {
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index adeac255e526..1deaca4674e4 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -913,16 +913,12 @@ static void moxa_board_deinit(struct moxa_board_conf *brd)
 
 	/* pci hot-un-plug support */
 	for (a = 0; a < brd->numPorts; a++)
-		if (brd->ports[a].port.flags & ASYNC_INITIALIZED) {
-			struct tty_struct *tty = tty_port_tty_get(
-						&brd->ports[a].port);
-			if (tty) {
-				tty_hangup(tty);
-				tty_kref_put(tty);
-			}
-		}
+		if (brd->ports[a].port.flags & ASYNC_INITIALIZED)
+			tty_port_tty_hangup(&brd->ports[a].port, false);
+
 	for (a = 0; a < MAX_PORTS_PER_BOARD; a++)
 		tty_port_destroy(&brd->ports[a].port);
+
 	while (1) {
 		opened = 0;
 		for (a = 0; a < brd->numPorts; a++)
@@ -1365,7 +1361,6 @@ static void moxa_hangup(struct tty_struct *tty)
 
 static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
 {
-	struct tty_struct *tty;
 	unsigned long flags;
 	dcd = !!dcd;
 
@@ -1373,10 +1368,8 @@ static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
 	if (dcd != p->DCDState) {
         	p->DCDState = dcd;
         	spin_unlock_irqrestore(&p->port.lock, flags);
-		tty = tty_port_tty_get(&p->port);
-		if (tty && !C_CLOCAL(tty) && !dcd)
-			tty_hangup(tty);
-		tty_kref_put(tty);
+		if (!dcd)
+			tty_port_tty_hangup(&p->port, true);
 	}
 	else
 		spin_unlock_irqrestore(&p->port.lock, flags);
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 484b6a3c9b03..4c4a23674569 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1084,6 +1084,10 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
 	mutex_lock(&port->mutex);
 	mxser_close_port(port);
 	mxser_flush_buffer(tty);
+	if (test_bit(ASYNCB_INITIALIZED, &port->flags)) {
+		if (C_HUPCL(tty))
+			tty_port_lower_dtr_rts(port);
+	}
 	mxser_shutdown_port(port);
 	clear_bit(ASYNCB_INITIALIZED, &port->flags);
 	mutex_unlock(&port->mutex);
@@ -1614,8 +1618,12 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 				if (ip->type == PORT_16550A)
 					me->fifo[p] = 1;
 
-				opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2);
-				opmode &= OP_MODE_MASK;
+				if (ip->board->chip_flag == MOXA_MUST_MU860_HWID) {
+					opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2);
+					opmode &= OP_MODE_MASK;
+				} else {
+					opmode = RS232_MODE;
+				}
 				me->iftype[p] = opmode;
 				mutex_unlock(&port->mutex);
 			}
@@ -1672,6 +1680,9 @@ static int mxser_ioctl(struct tty_struct *tty,
 		int shiftbit;
 		unsigned char val, mask;
 
+		if (info->board->chip_flag != MOXA_MUST_MU860_HWID)
+			return -EFAULT;
+
 		p = tty->index % 4;
 		if (cmd == MOXA_SET_OP_MODE) {
 			if (get_user(opmode, (int __user *) argp))
@@ -2643,9 +2654,9 @@ static int mxser_probe(struct pci_dev *pdev,
 				mxvar_sdriver, brd->idx + i, &pdev->dev);
 		if (IS_ERR(tty_dev)) {
 			retval = PTR_ERR(tty_dev);
-			for (i--; i >= 0; i--)
+			for (; i > 0; i--)
 				tty_unregister_device(mxvar_sdriver,
-					brd->idx + i);
+					brd->idx + i - 1);
 			goto err_relbrd;
 		}
 	}
@@ -2751,9 +2762,9 @@ static int __init mxser_module_init(void)
 			tty_dev = tty_port_register_device(&brd->ports[i].port,
 					mxvar_sdriver, brd->idx + i, NULL);
 			if (IS_ERR(tty_dev)) {
-				for (i--; i >= 0; i--)
+				for (; i > 0; i--)
 					tty_unregister_device(mxvar_sdriver,
-						brd->idx + i);
+						brd->idx + i - 1);
 				for (i = 0; i < brd->info->nports; i++)
 					tty_port_destroy(&brd->ports[i].port);
 				free_irq(brd->irq, brd);
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 4a43ef5d7962..642239015b46 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1418,11 +1418,7 @@ static void gsm_dlci_close(struct gsm_dlci *dlci)
 		pr_debug("DLCI %d goes closed.\n", dlci->addr);
 	dlci->state = DLCI_CLOSED;
 	if (dlci->addr != 0) {
-		struct tty_struct  *tty = tty_port_tty_get(&dlci->port);
-		if (tty) {
-			tty_hangup(tty);
-			tty_kref_put(tty);
-		}
+		tty_port_tty_hangup(&dlci->port, false);
 		kfifo_reset(dlci->fifo);
 	} else
 		dlci->gsm->dead = 1;
@@ -2968,6 +2964,10 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp)
 	if (tty_port_close_start(&dlci->port, tty, filp) == 0)
 		goto out;
 	gsm_dlci_begin_close(dlci);
+	if (test_bit(ASYNCB_INITIALIZED, &dlci->port.flags)) {
+		if (C_HUPCL(tty))
+			tty_port_lower_dtr_rts(&dlci->port);
+	}
 	tty_port_close_end(&dlci->port, tty);
 	tty_port_tty_set(&dlci->port, NULL);
 out:
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 05e72bea9b07..6c7fe90ad72d 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -153,6 +153,12 @@ static void n_tty_set_room(struct tty_struct *tty)
 	if (left && !old_left) {
 		WARN_RATELIMIT(tty->port->itty == NULL,
 				"scheduling with invalid itty\n");
+		/* see if ldisc has been killed - if so, this means that
+		 * even though the ldisc has been halted and ->buf.work
+		 * cancelled, ->buf.work is about to be rescheduled
+		 */
+		WARN_RATELIMIT(test_bit(TTY_LDISC_HALTED, &tty->flags),
+			       "scheduling buffer work for halted ldisc\n");
 		schedule_work(&tty->port->buf.work);
 	}
 }
@@ -189,34 +195,17 @@ static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
 }
 
 /**
- *	check_unthrottle	-	allow new receive data
- *	@tty; tty device
- *
- *	Check whether to call the driver unthrottle functions
- *
- *	Can sleep, may be called under the atomic_read_lock mutex but
- *	this is not guaranteed.
- */
-static void check_unthrottle(struct tty_struct *tty)
-{
-	if (tty->count)
-		tty_unthrottle(tty);
-}
-
-/**
  *	reset_buffer_flags	-	reset buffer state
  *	@tty: terminal to reset
  *
- *	Reset the read buffer counters, clear the flags,
- *	and make sure the driver is unthrottled. Called
- *	from n_tty_open() and n_tty_flush_buffer().
+ *	Reset the read buffer counters and clear the flags.
+ *	Called from n_tty_open() and n_tty_flush_buffer().
  *
  *	Locking: tty_read_lock for read fields.
  */
 
-static void reset_buffer_flags(struct tty_struct *tty)
+static void reset_buffer_flags(struct n_tty_data *ldata)
 {
-	struct n_tty_data *ldata = tty->disc_data;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&ldata->read_lock, flags);
@@ -229,36 +218,38 @@ static void reset_buffer_flags(struct tty_struct *tty)
 
 	ldata->canon_head = ldata->canon_data = ldata->erasing = 0;
 	bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
-	n_tty_set_room(tty);
+}
+
+static void n_tty_packet_mode_flush(struct tty_struct *tty)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tty->ctrl_lock, flags);
+	if (tty->link->packet) {
+		tty->ctrl_status |= TIOCPKT_FLUSHREAD;
+		wake_up_interruptible(&tty->link->read_wait);
+	}
+	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
 }
 
 /**
  *	n_tty_flush_buffer	-	clean input queue
  *	@tty:	terminal device
  *
- *	Flush the input buffer. Called when the line discipline is
- *	being closed, when the tty layer wants the buffer flushed (eg
- *	at hangup) or when the N_TTY line discipline internally has to
- *	clean the pending queue (for example some signals).
+ *	Flush the input buffer. Called when the tty layer wants the
+ *	buffer flushed (eg at hangup) or when the N_TTY line discipline
+ *	internally has to clean the pending queue (for example some signals).
  *
  *	Locking: ctrl_lock, read_lock.
  */
 
 static void n_tty_flush_buffer(struct tty_struct *tty)
 {
-	unsigned long flags;
-	/* clear everything and unthrottle the driver */
-	reset_buffer_flags(tty);
-
-	if (!tty->link)
-		return;
+	reset_buffer_flags(tty->disc_data);
+	n_tty_set_room(tty);
 
-	spin_lock_irqsave(&tty->ctrl_lock, flags);
-	if (tty->link->packet) {
-		tty->ctrl_status |= TIOCPKT_FLUSHREAD;
-		wake_up_interruptible(&tty->link->read_wait);
-	}
-	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+	if (tty->link)
+		n_tty_packet_mode_flush(tty);
 }
 
 /**
@@ -1032,23 +1023,19 @@ static void eraser(unsigned char c, struct tty_struct *tty)
  *	isig		-	handle the ISIG optio
  *	@sig: signal
  *	@tty: terminal
- *	@flush: force flush
  *
- *	Called when a signal is being sent due to terminal input. This
- *	may caus terminal flushing to take place according to the termios
- *	settings and character used. Called from the driver receive_buf
- *	path so serialized.
+ *	Called when a signal is being sent due to terminal input.
+ *	Called from the driver receive_buf path so serialized.
  *
- *	Locking: ctrl_lock, read_lock (both via flush buffer)
+ *	Locking: ctrl_lock
  */
 
-static inline void isig(int sig, struct tty_struct *tty, int flush)
+static inline void isig(int sig, struct tty_struct *tty)
 {
-	if (tty->pgrp)
-		kill_pgrp(tty->pgrp, sig, 1);
-	if (flush || !L_NOFLSH(tty)) {
-		n_tty_flush_buffer(tty);
-		tty_driver_flush_buffer(tty);
+	struct pid *tty_pgrp = tty_get_pgrp(tty);
+	if (tty_pgrp) {
+		kill_pgrp(tty_pgrp, sig, 1);
+		put_pid(tty_pgrp);
 	}
 }
 
@@ -1069,7 +1056,11 @@ static inline void n_tty_receive_break(struct tty_struct *tty)
 	if (I_IGNBRK(tty))
 		return;
 	if (I_BRKINT(tty)) {
-		isig(SIGINT, tty, 1);
+		isig(SIGINT, tty);
+		if (!L_NOFLSH(tty)) {
+			n_tty_flush_buffer(tty);
+			tty_driver_flush_buffer(tty);
+		}
 		return;
 	}
 	if (I_PARMRK(tty)) {
@@ -1236,11 +1227,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 		signal = SIGTSTP;
 		if (c == SUSP_CHAR(tty)) {
 send_signal:
-			/*
-			 * Note that we do not use isig() here because we want
-			 * the order to be:
-			 * 1) flush, 2) echo, 3) signal
-			 */
 			if (!L_NOFLSH(tty)) {
 				n_tty_flush_buffer(tty);
 				tty_driver_flush_buffer(tty);
@@ -1251,8 +1237,7 @@ send_signal:
 				echo_char(c, tty);
 				process_echoes(tty);
 			}
-			if (tty->pgrp)
-				kill_pgrp(tty->pgrp, signal, 1);
+			isig(signal, tty);
 			return;
 		}
 	}
@@ -1483,14 +1468,14 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 	 * mode.  We don't want to throttle the driver if we're in
 	 * canonical mode and don't have a newline yet!
 	 */
-	if (tty->receive_room < TTY_THRESHOLD_THROTTLE)
-		tty_throttle(tty);
-
-        /* FIXME: there is a tiny race here if the receive room check runs
-           before the other work executes and empties the buffer (upping
-           the receiving room and unthrottling. We then throttle and get
-           stuck. This has been observed and traced down by Vincent Pillet/
-           We need to address this when we sort out out the rx path locking */
+	while (1) {
+		tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
+		if (tty->receive_room >= TTY_THRESHOLD_THROTTLE)
+			break;
+		if (!tty_throttle_safe(tty))
+			break;
+	}
+	__tty_set_flow_change(tty, 0);
 }
 
 int is_ignored(int sig)
@@ -1588,6 +1573,14 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 			ldata->real_raw = 0;
 	}
 	n_tty_set_room(tty);
+	/*
+	 * Fix tty hang when I_IXON(tty) is cleared, but the tty
+	 * been stopped by STOP_CHAR(tty) before it.
+	 */
+	if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) {
+		start_tty(tty);
+	}
+
 	/* The termios change make the tty ready for I/O */
 	wake_up_interruptible(&tty->write_wait);
 	wake_up_interruptible(&tty->read_wait);
@@ -1607,7 +1600,9 @@ static void n_tty_close(struct tty_struct *tty)
 {
 	struct n_tty_data *ldata = tty->disc_data;
 
-	n_tty_flush_buffer(tty);
+	if (tty->link)
+		n_tty_packet_mode_flush(tty);
+
 	kfree(ldata->read_buf);
 	kfree(ldata->echo_buf);
 	kfree(ldata);
@@ -1645,12 +1640,14 @@ static int n_tty_open(struct tty_struct *tty)
 		goto err_free_bufs;
 
 	tty->disc_data = ldata;
-	reset_buffer_flags(tty);
-	tty_unthrottle(tty);
+	reset_buffer_flags(tty->disc_data);
 	ldata->column = 0;
-	n_tty_set_termios(tty, NULL);
 	tty->minimum_to_wake = 1;
 	tty->closing = 0;
+	/* indicate buffer work may resume */
+	clear_bit(TTY_LDISC_HALTED, &tty->flags);
+	n_tty_set_termios(tty, NULL);
+	tty_unthrottle(tty);
 
 	return 0;
 err_free_bufs:
@@ -1740,10 +1737,9 @@ extern ssize_t redirected_tty_write(struct file *, const char __user *,
  *	and if appropriate send any needed signals and return a negative
  *	error code if action should be taken.
  *
- *	FIXME:
- *	Locking: None - redirected write test is safe, testing
- *	current->signal should possibly lock current->sighand
- *	pgrp locking ?
+ *	Locking: redirected write test is safe
+ *		 current->signal->tty check is safe
+ *		 ctrl_lock to safely reference tty->pgrp
  */
 
 static int job_control(struct tty_struct *tty, struct file *file)
@@ -1753,19 +1749,22 @@ static int job_control(struct tty_struct *tty, struct file *file)
 	/* NOTE: not yet done after every sleep pending a thorough
 	   check of the logic of this change. -- jlc */
 	/* don't stop on /dev/console */
-	if (file->f_op->write != redirected_tty_write &&
-	    current->signal->tty == tty) {
-		if (!tty->pgrp)
-			printk(KERN_ERR "n_tty_read: no tty->pgrp!\n");
-		else if (task_pgrp(current) != tty->pgrp) {
-			if (is_ignored(SIGTTIN) ||
-			    is_current_pgrp_orphaned())
-				return -EIO;
-			kill_pgrp(task_pgrp(current), SIGTTIN, 1);
-			set_thread_flag(TIF_SIGPENDING);
-			return -ERESTARTSYS;
-		}
+	if (file->f_op->write == redirected_tty_write ||
+	    current->signal->tty != tty)
+		return 0;
+
+	spin_lock_irq(&tty->ctrl_lock);
+	if (!tty->pgrp)
+		printk(KERN_ERR "n_tty_read: no tty->pgrp!\n");
+	else if (task_pgrp(current) != tty->pgrp) {
+		spin_unlock_irq(&tty->ctrl_lock);
+		if (is_ignored(SIGTTIN) || is_current_pgrp_orphaned())
+			return -EIO;
+		kill_pgrp(task_pgrp(current), SIGTTIN, 1);
+		set_thread_flag(TIF_SIGPENDING);
+		return -ERESTARTSYS;
 	}
+	spin_unlock_irq(&tty->ctrl_lock);
 	return 0;
 }
 
@@ -1959,10 +1958,17 @@ do_it_again:
 		 * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode,
 		 * we won't get any more characters.
 		 */
-		if (n_tty_chars_in_buffer(tty) <= TTY_THRESHOLD_UNTHROTTLE) {
+		while (1) {
+			tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
+			if (n_tty_chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
+				break;
+			if (!tty->count)
+				break;
 			n_tty_set_room(tty);
-			check_unthrottle(tty);
+			if (!tty_unthrottle_safe(tty))
+				break;
 		}
+		__tty_set_flow_change(tty, 0);
 
 		if (b - buf >= minimum)
 			break;
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index 2dff19796157..d6080c3831ef 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -791,7 +791,6 @@ static int send_data(enum port_type index, struct nozomi *dc)
 	const u8 toggle = port->toggle_ul;
 	void __iomem *addr = port->ul_addr[toggle];
 	const u32 ul_size = port->ul_size[toggle];
-	struct tty_struct *tty = tty_port_tty_get(&port->port);
 
 	/* Get data from tty and place in buf for now */
 	size = kfifo_out(&port->fifo_ul, dc->send_buf,
@@ -799,7 +798,6 @@ static int send_data(enum port_type index, struct nozomi *dc)
 
 	if (size == 0) {
 		DBG4("No more data to send, disable link:");
-		tty_kref_put(tty);
 		return 0;
 	}
 
@@ -809,10 +807,8 @@ static int send_data(enum port_type index, struct nozomi *dc)
 	write_mem32(addr, (u32 *) &size, 4);
 	write_mem32(addr + 4, (u32 *) dc->send_buf, size);
 
-	if (tty)
-		tty_wakeup(tty);
+	tty_port_tty_wakeup(&port->port);
 
-	tty_kref_put(tty);
 	return 1;
 }
 
@@ -1505,12 +1501,9 @@ static void tty_exit(struct nozomi *dc)
 
 	DBG1(" ");
 
-	for (i = 0; i < MAX_PORT; ++i) {
-		struct tty_struct *tty = tty_port_tty_get(&dc->port[i].port);
-		if (tty && list_empty(&tty->hangup_work.entry))
-			tty_hangup(tty);
-		tty_kref_put(tty);
-	}
+	for (i = 0; i < MAX_PORT; ++i)
+		tty_port_tty_hangup(&dc->port[i].port, false);
+
 	/* Racy below - surely should wait for scheduled work to be done or
 	   complete off a hangup method ? */
 	while (dc->open_ttys)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index c24b4db243b9..59bfaecc4e14 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -405,15 +405,8 @@ err:
 	return retval;
 }
 
-/* this is called once with whichever end is closed last */
-static void pty_unix98_shutdown(struct tty_struct *tty)
-{
-	devpts_kill_index(tty->driver_data, tty->index);
-}
-
 static void pty_cleanup(struct tty_struct *tty)
 {
-	tty->port->itty = NULL;
 	tty_port_put(tty->port);
 }
 
@@ -627,6 +620,12 @@ static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
 {
 }
 
+/* this is called once with whichever end is closed last */
+static void pty_unix98_shutdown(struct tty_struct *tty)
+{
+	devpts_kill_index(tty->driver_data, tty->index);
+}
+
 static const struct tty_operations ptm_unix98_ops = {
 	.lookup = ptm_unix98_lookup,
 	.install = pty_unix98_install,
@@ -682,6 +681,9 @@ static int ptmx_open(struct inode *inode, struct file *filp)
 
 	nonseekable_open(inode, filp);
 
+	/* We refuse fsnotify events on ptmx, since it's a shared resource */
+	filp->f_mode |= FMODE_NONOTIFY;
+
 	retval = tty_alloc_file(filp);
 	if (retval)
 		return retval;
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 1d270034bfc3..354564ea47c5 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -150,12 +150,14 @@ static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = {
 	AIOP_INTR_BIT_3
 };
 
+#ifdef CONFIG_PCI
 static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = {
 	UPCI_AIOP_INTR_BIT_0,
 	UPCI_AIOP_INTR_BIT_1,
 	UPCI_AIOP_INTR_BIT_2,
 	UPCI_AIOP_INTR_BIT_3
 };
+#endif
 
 static Byte_t RData[RDATASIZE] = {
 	0x00, 0x09, 0xf6, 0x82,
@@ -227,7 +229,6 @@ static unsigned long nextLineNumber;
 static int __init init_ISA(int i);
 static void rp_wait_until_sent(struct tty_struct *tty, int timeout);
 static void rp_flush_buffer(struct tty_struct *tty);
-static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model);
 static unsigned char GetLineNumber(int ctrl, int aiop, int ch);
 static unsigned char SetLineNumber(int ctrl, int aiop, int ch);
 static void rp_start(struct tty_struct *tty);
@@ -241,11 +242,6 @@ static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags);
 static void sModemReset(CONTROLLER_T * CtlP, int chan, int on);
 static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on);
 static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data);
-static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
-			      ByteIO_t * AiopIOList, int AiopIOListSize,
-			      WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
-			      int PeriodicOnly, int altChanRingIndicator,
-			      int UPCIRingInd);
 static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
 			   ByteIO_t * AiopIOList, int AiopIOListSize,
 			   int IRQNum, Byte_t Frequency, int PeriodicOnly);
@@ -449,7 +445,7 @@ static void rp_do_transmit(struct r_port *info)
 
 	/*  Loop sending data to FIFO until done or FIFO full */
 	while (1) {
-		if (tty->stopped || tty->hw_stopped)
+		if (tty->stopped)
 			break;
 		c = min(info->xmit_fifo_room, info->xmit_cnt);
 		c = min(c, XMIT_BUF_SIZE - info->xmit_tail);
@@ -521,15 +517,10 @@ static void rp_handle_port(struct r_port *info)
 		       (ChanStatus & CD_ACT) ? "on" : "off");
 #endif
 		if (!(ChanStatus & CD_ACT) && info->cd_status) {
-			struct tty_struct *tty;
 #ifdef ROCKET_DEBUG_HANGUP
 			printk(KERN_INFO "CD drop, calling hangup.\n");
 #endif
-			tty = tty_port_tty_get(&info->port);
-			if (tty) {
-				tty_hangup(tty);
-				tty_kref_put(tty);
-			}
+			tty_port_tty_hangup(&info->port, false);
 		}
 		info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0;
 		wake_up_interruptible(&info->port.open_wait);
@@ -1111,15 +1102,12 @@ static void rp_set_termios(struct tty_struct *tty,
 
 	/* Handle transition away from B0 status */
 	if (!(old_termios->c_cflag & CBAUD) && (tty->termios.c_cflag & CBAUD)) {
-		if (!tty->hw_stopped || !(tty->termios.c_cflag & CRTSCTS))
-			sSetRTS(cp);
+		sSetRTS(cp);
 		sSetDTR(cp);
 	}
 
-	if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios.c_cflag & CRTSCTS)) {
-		tty->hw_stopped = 0;
+	if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios.c_cflag & CRTSCTS))
 		rp_start(tty);
-	}
 }
 
 static int rp_break(struct tty_struct *tty, int break_state)
@@ -1575,10 +1563,10 @@ static int rp_put_char(struct tty_struct *tty, unsigned char ch)
 	spin_lock_irqsave(&info->slock, flags);
 	cp = &info->channel;
 
-	if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room == 0)
+	if (!tty->stopped && info->xmit_fifo_room == 0)
 		info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
 
-	if (tty->stopped || tty->hw_stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) {
+	if (tty->stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) {
 		info->xmit_buf[info->xmit_head++] = ch;
 		info->xmit_head &= XMIT_BUF_SIZE - 1;
 		info->xmit_cnt++;
@@ -1619,14 +1607,14 @@ static int rp_write(struct tty_struct *tty,
 #endif
 	cp = &info->channel;
 
-	if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room < count)
+	if (!tty->stopped && info->xmit_fifo_room < count)
 		info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
 
         /*
 	 *  If the write queue for the port is empty, and there is FIFO space, stuff bytes 
 	 *  into FIFO.  Use the write queue for temp storage.
          */
-	if (!tty->stopped && !tty->hw_stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
+	if (!tty->stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
 		c = min(count, info->xmit_fifo_room);
 		b = buf;
 
@@ -1674,7 +1662,7 @@ static int rp_write(struct tty_struct *tty,
 		retval += c;
 	}
 
-	if ((retval > 0) && !tty->stopped && !tty->hw_stopped)
+	if ((retval > 0) && !tty->stopped)
 		set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
 	
 end:
@@ -1783,6 +1771,145 @@ static DEFINE_PCI_DEVICE_TABLE(rocket_pci_ids) = {
 };
 MODULE_DEVICE_TABLE(pci, rocket_pci_ids);
 
+/*  Resets the speaker controller on RocketModem II and III devices */
+static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
+{
+	ByteIO_t addr;
+
+	/* RocketModem II speaker control is at the 8th port location of offset 0x40 */
+	if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
+		addr = CtlP->AiopIO[0] + 0x4F;
+		sOutB(addr, 0);
+	}
+
+	/* RocketModem III speaker control is at the 1st port location of offset 0x80 */
+	if ((model == MODEL_UPCI_RM3_8PORT)
+	    || (model == MODEL_UPCI_RM3_4PORT)) {
+		addr = CtlP->AiopIO[0] + 0x88;
+		sOutB(addr, 0);
+	}
+}
+
+/***************************************************************************
+Function: sPCIInitController
+Purpose:  Initialization of controller global registers and controller
+          structure.
+Call:     sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
+                          IRQNum,Frequency,PeriodicOnly)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          int CtlNum; Controller number
+          ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
+             This list must be in the order the AIOPs will be found on the
+             controller.  Once an AIOP in the list is not found, it is
+             assumed that there are no more AIOPs on the controller.
+          int AiopIOListSize; Number of addresses in AiopIOList
+          int IRQNum; Interrupt Request number.  Can be any of the following:
+                         0: Disable global interrupts
+                         3: IRQ 3
+                         4: IRQ 4
+                         5: IRQ 5
+                         9: IRQ 9
+                         10: IRQ 10
+                         11: IRQ 11
+                         12: IRQ 12
+                         15: IRQ 15
+          Byte_t Frequency: A flag identifying the frequency
+                   of the periodic interrupt, can be any one of the following:
+                      FREQ_DIS - periodic interrupt disabled
+                      FREQ_137HZ - 137 Hertz
+                      FREQ_69HZ - 69 Hertz
+                      FREQ_34HZ - 34 Hertz
+                      FREQ_17HZ - 17 Hertz
+                      FREQ_9HZ - 9 Hertz
+                      FREQ_4HZ - 4 Hertz
+                   If IRQNum is set to 0 the Frequency parameter is
+                   overidden, it is forced to a value of FREQ_DIS.
+          int PeriodicOnly: 1 if all interrupts except the periodic
+                               interrupt are to be blocked.
+                            0 is both the periodic interrupt and
+                               other channel interrupts are allowed.
+                            If IRQNum is set to 0 the PeriodicOnly parameter is
+                               overidden, it is forced to a value of 0.
+Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
+               initialization failed.
+
+Comments:
+          If periodic interrupts are to be disabled but AIOP interrupts
+          are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
+
+          If interrupts are to be completely disabled set IRQNum to 0.
+
+          Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
+          invalid combination.
+
+          This function performs initialization of global interrupt modes,
+          but it does not actually enable global interrupts.  To enable
+          and disable global interrupts use functions sEnGlobalInt() and
+          sDisGlobalInt().  Enabling of global interrupts is normally not
+          done until all other initializations are complete.
+
+          Even if interrupts are globally enabled, they must also be
+          individually enabled for each channel that is to generate
+          interrupts.
+
+Warnings: No range checking on any of the parameters is done.
+
+          No context switches are allowed while executing this function.
+
+          After this function all AIOPs on the controller are disabled,
+          they can be enabled with sEnAiop().
+*/
+static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
+			      ByteIO_t * AiopIOList, int AiopIOListSize,
+			      WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
+			      int PeriodicOnly, int altChanRingIndicator,
+			      int UPCIRingInd)
+{
+	int i;
+	ByteIO_t io;
+
+	CtlP->AltChanRingIndicator = altChanRingIndicator;
+	CtlP->UPCIRingInd = UPCIRingInd;
+	CtlP->CtlNum = CtlNum;
+	CtlP->CtlID = CTLID_0001;	/* controller release 1 */
+	CtlP->BusType = isPCI;	/* controller release 1 */
+
+	if (ConfigIO) {
+		CtlP->isUPCI = 1;
+		CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
+		CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
+		CtlP->AiopIntrBits = upci_aiop_intr_bits;
+	} else {
+		CtlP->isUPCI = 0;
+		CtlP->PCIIO =
+		    (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
+		CtlP->AiopIntrBits = aiop_intr_bits;
+	}
+
+	sPCIControllerEOI(CtlP);	/* clear EOI if warm init */
+	/* Init AIOPs */
+	CtlP->NumAiop = 0;
+	for (i = 0; i < AiopIOListSize; i++) {
+		io = AiopIOList[i];
+		CtlP->AiopIO[i] = (WordIO_t) io;
+		CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
+
+		CtlP->AiopID[i] = sReadAiopID(io);	/* read AIOP ID */
+		if (CtlP->AiopID[i] == AIOPID_NULL)	/* if AIOP does not exist */
+			break;	/* done looking for AIOPs */
+
+		CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io);	/* num channels in AIOP */
+		sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE);	/* clock prescaler */
+		sOutB(io + _INDX_DATA, sClockPrescale);
+		CtlP->NumAiop++;	/* bump count of AIOPs */
+	}
+
+	if (CtlP->NumAiop == 0)
+		return (-1);
+	else
+		return (CtlP->NumAiop);
+}
+
 /*
  *  Called when a PCI card is found.  Retrieves and stores model information,
  *  init's aiopic and serial port hardware.
@@ -2528,126 +2655,6 @@ static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
 }
 
 /***************************************************************************
-Function: sPCIInitController
-Purpose:  Initialization of controller global registers and controller
-          structure.
-Call:     sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
-                          IRQNum,Frequency,PeriodicOnly)
-          CONTROLLER_T *CtlP; Ptr to controller structure
-          int CtlNum; Controller number
-          ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
-             This list must be in the order the AIOPs will be found on the
-             controller.  Once an AIOP in the list is not found, it is
-             assumed that there are no more AIOPs on the controller.
-          int AiopIOListSize; Number of addresses in AiopIOList
-          int IRQNum; Interrupt Request number.  Can be any of the following:
-                         0: Disable global interrupts
-                         3: IRQ 3
-                         4: IRQ 4
-                         5: IRQ 5
-                         9: IRQ 9
-                         10: IRQ 10
-                         11: IRQ 11
-                         12: IRQ 12
-                         15: IRQ 15
-          Byte_t Frequency: A flag identifying the frequency
-                   of the periodic interrupt, can be any one of the following:
-                      FREQ_DIS - periodic interrupt disabled
-                      FREQ_137HZ - 137 Hertz
-                      FREQ_69HZ - 69 Hertz
-                      FREQ_34HZ - 34 Hertz
-                      FREQ_17HZ - 17 Hertz
-                      FREQ_9HZ - 9 Hertz
-                      FREQ_4HZ - 4 Hertz
-                   If IRQNum is set to 0 the Frequency parameter is
-                   overidden, it is forced to a value of FREQ_DIS.
-          int PeriodicOnly: 1 if all interrupts except the periodic
-                               interrupt are to be blocked.
-                            0 is both the periodic interrupt and
-                               other channel interrupts are allowed.
-                            If IRQNum is set to 0 the PeriodicOnly parameter is
-                               overidden, it is forced to a value of 0.
-Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
-               initialization failed.
-
-Comments:
-          If periodic interrupts are to be disabled but AIOP interrupts
-          are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
-
-          If interrupts are to be completely disabled set IRQNum to 0.
-
-          Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
-          invalid combination.
-
-          This function performs initialization of global interrupt modes,
-          but it does not actually enable global interrupts.  To enable
-          and disable global interrupts use functions sEnGlobalInt() and
-          sDisGlobalInt().  Enabling of global interrupts is normally not
-          done until all other initializations are complete.
-
-          Even if interrupts are globally enabled, they must also be
-          individually enabled for each channel that is to generate
-          interrupts.
-
-Warnings: No range checking on any of the parameters is done.
-
-          No context switches are allowed while executing this function.
-
-          After this function all AIOPs on the controller are disabled,
-          they can be enabled with sEnAiop().
-*/
-static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
-			      ByteIO_t * AiopIOList, int AiopIOListSize,
-			      WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
-			      int PeriodicOnly, int altChanRingIndicator,
-			      int UPCIRingInd)
-{
-	int i;
-	ByteIO_t io;
-
-	CtlP->AltChanRingIndicator = altChanRingIndicator;
-	CtlP->UPCIRingInd = UPCIRingInd;
-	CtlP->CtlNum = CtlNum;
-	CtlP->CtlID = CTLID_0001;	/* controller release 1 */
-	CtlP->BusType = isPCI;	/* controller release 1 */
-
-	if (ConfigIO) {
-		CtlP->isUPCI = 1;
-		CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
-		CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
-		CtlP->AiopIntrBits = upci_aiop_intr_bits;
-	} else {
-		CtlP->isUPCI = 0;
-		CtlP->PCIIO =
-		    (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
-		CtlP->AiopIntrBits = aiop_intr_bits;
-	}
-
-	sPCIControllerEOI(CtlP);	/* clear EOI if warm init */
-	/* Init AIOPs */
-	CtlP->NumAiop = 0;
-	for (i = 0; i < AiopIOListSize; i++) {
-		io = AiopIOList[i];
-		CtlP->AiopIO[i] = (WordIO_t) io;
-		CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
-
-		CtlP->AiopID[i] = sReadAiopID(io);	/* read AIOP ID */
-		if (CtlP->AiopID[i] == AIOPID_NULL)	/* if AIOP does not exist */
-			break;	/* done looking for AIOPs */
-
-		CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io);	/* num channels in AIOP */
-		sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE);	/* clock prescaler */
-		sOutB(io + _INDX_DATA, sClockPrescale);
-		CtlP->NumAiop++;	/* bump count of AIOPs */
-	}
-
-	if (CtlP->NumAiop == 0)
-		return (-1);
-	else
-		return (CtlP->NumAiop);
-}
-
-/***************************************************************************
 Function: sReadAiopID
 Purpose:  Read the AIOP idenfication number directly from an AIOP.
 Call:     sReadAiopID(io)
@@ -3136,25 +3143,6 @@ static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on)
 	sOutB(addr + chan, 0);	/* apply or remove reset */
 }
 
-/*  Resets the speaker controller on RocketModem II and III devices */
-static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
-{
-	ByteIO_t addr;
-
-	/* RocketModem II speaker control is at the 8th port location of offset 0x40 */
-	if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
-		addr = CtlP->AiopIO[0] + 0x4F;
-		sOutB(addr, 0);
-	}
-
-	/* RocketModem III speaker control is at the 1st port location of offset 0x80 */
-	if ((model == MODEL_UPCI_RM3_8PORT)
-	    || (model == MODEL_UPCI_RM3_4PORT)) {
-		addr = CtlP->AiopIO[0] + 0x88;
-		sOutB(addr, 0);
-	}
-}
-
 /*  Returns the line number given the controller (board), aiop and channel number */
 static unsigned char GetLineNumber(int ctrl, int aiop, int ch)
 {
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 49399470794d..5dc9c4bfa66e 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -14,7 +14,6 @@
  * 2.4/2.5 port                 David McCullough
  */
 
-#include <asm/dbg.h>
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/serial.h>
@@ -630,8 +629,7 @@ static void rs_flush_chars(struct tty_struct *tty)
 	/* Enable transmitter */
 	local_irq_save(flags);
 
-	if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
-			!info->xmit_buf) {
+	if (info->xmit_cnt <= 0 || tty->stopped || !info->xmit_buf) {
 		local_irq_restore(flags);
 		return;
 	}
@@ -697,7 +695,7 @@ static int rs_write(struct tty_struct * tty,
 		total += c;
 	}
 
-	if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
+	if (info->xmit_cnt && !tty->stopped) {
 		/* Enable transmitter */
 		local_irq_disable();		
 #ifndef USE_INTS
@@ -978,10 +976,8 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 	change_speed(info, tty);
 
 	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios.c_cflag & CRTSCTS)) {
-		tty->hw_stopped = 0;
+	    !(tty->termios.c_cflag & CRTSCTS))
 		rs_start(tty);
-	}
 	
 }
 
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 34eb676916fe..1ebf8538b4fa 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -117,13 +117,6 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value)
  * is cleared, the machine locks up with endless interrupts.
  */
 #define ALPHA_KLUDGE_MCR  (UART_MCR_OUT2 | UART_MCR_OUT1)
-#elif defined(CONFIG_SBC8560)
-/*
- * WindRiver did something similarly broken on their SBC8560 board. The
- * UART tristates its IRQ output while OUT2 is clear, but they pulled
- * the interrupt line _up_ instead of down, so if we register the IRQ
- * while the UART is in that state, we die in an IRQ storm. */
-#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
 #else
 #define ALPHA_KLUDGE_MCR 0
 #endif
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250_core.c
index cf6a5383748a..86c00b1c5583 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -3247,6 +3247,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 		uart->tx_loadsz		= up->tx_loadsz;
 		uart->capabilities	= up->capabilities;
 
+		/* Take tx_loadsz from fifosize if it wasn't set separately */
+		if (uart->port.fifosize && !uart->tx_loadsz)
+			uart->tx_loadsz = uart->port.fifosize;
+
 		if (up->port.dev)
 			uart->port.dev = up->port.dev;
 
@@ -3418,6 +3422,7 @@ MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
 #endif
 MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
 
+#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
 #ifndef MODULE
 /* This module was renamed to 8250_core in 3.7.  Keep the old "8250" name
  * working as well for the module options so we don't break people.  We
@@ -3432,7 +3437,7 @@ MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
 static void __used s8250_options(void)
 {
 #undef MODULE_PARAM_PREFIX
-#define MODULE_PARAM_PREFIX "8250."
+#define MODULE_PARAM_PREFIX "8250_core."
 
 	module_param_cb(share_irqs, &param_ops_uint, &share_irqs, 0644);
 	module_param_cb(nr_uarts, &param_ops_uint, &nr_uarts, 0644);
@@ -3444,5 +3449,6 @@ static void __used s8250_options(void)
 #endif
 }
 #else
-MODULE_ALIAS("8250");
+MODULE_ALIAS("8250_core");
+#endif
 #endif
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index b9f7fd28112e..7046769608d4 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -33,10 +33,8 @@ static void __dma_tx_complete(void *param)
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(&p->port);
 
-	if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port)) {
+	if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port))
 		serial8250_tx_dma(p);
-		uart_write_wakeup(&p->port);
-	}
 }
 
 static void __dma_rx_complete(void *param)
@@ -67,12 +65,11 @@ int serial8250_tx_dma(struct uart_8250_port *p)
 	struct circ_buf			*xmit = &p->port.state->xmit;
 	struct dma_async_tx_descriptor	*desc;
 
-	if (dma->tx_running)
-		return -EBUSY;
+	if (uart_tx_stopped(&p->port) || dma->tx_running ||
+	    uart_circ_empty(xmit))
+		return 0;
 
 	dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
-	if (!dma->tx_size)
-		return -EINVAL;
 
 	desc = dmaengine_prep_slave_single(dma->txchan,
 					   dma->tx_addr + xmit->tail,
@@ -104,20 +101,29 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
 	struct dma_tx_state		state;
 	int				dma_status;
 
-	/*
-	 * If RCVR FIFO trigger level was not reached, complete the transfer and
-	 * let 8250.c copy the remaining data.
-	 */
-	if ((iir & 0x3f) == UART_IIR_RX_TIMEOUT) {
-		dma_status = dmaengine_tx_status(dma->rxchan, dma->rx_cookie,
-						&state);
+	dma_status = dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
+
+	switch (iir & 0x3f) {
+	case UART_IIR_RLSI:
+		/* 8250_core handles errors and break interrupts */
+		return -EIO;
+	case UART_IIR_RX_TIMEOUT:
+		/*
+		 * If RCVR FIFO trigger level was not reached, complete the
+		 * transfer and let 8250_core copy the remaining data.
+		 */
 		if (dma_status == DMA_IN_PROGRESS) {
 			dmaengine_pause(dma->rxchan);
 			__dma_rx_complete(p);
 		}
 		return -ETIMEDOUT;
+	default:
+		break;
 	}
 
+	if (dma_status)
+		return 0;
+
 	desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr,
 					   dma->rx_size, DMA_DEV_TO_MEM,
 					   DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
@@ -143,21 +149,31 @@ int serial8250_request_dma(struct uart_8250_port *p)
 	struct uart_8250_dma	*dma = p->dma;
 	dma_cap_mask_t		mask;
 
-	dma->rxconf.src_addr = p->port.mapbase + UART_RX;
-	dma->txconf.dst_addr = p->port.mapbase + UART_TX;
+	/* Default slave configuration parameters */
+	dma->rxconf.direction		= DMA_DEV_TO_MEM;
+	dma->rxconf.src_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma->rxconf.src_addr		= p->port.mapbase + UART_RX;
+
+	dma->txconf.direction		= DMA_MEM_TO_DEV;
+	dma->txconf.dst_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma->txconf.dst_addr		= p->port.mapbase + UART_TX;
 
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
 	/* Get a channel for RX */
-	dma->rxchan = dma_request_channel(mask, dma->fn, dma->rx_param);
+	dma->rxchan = dma_request_slave_channel_compat(mask,
+						       dma->fn, dma->rx_param,
+						       p->port.dev, "rx");
 	if (!dma->rxchan)
 		return -ENODEV;
 
 	dmaengine_slave_config(dma->rxchan, &dma->rxconf);
 
 	/* Get a channel for TX */
-	dma->txchan = dma_request_channel(mask, dma->fn, dma->tx_param);
+	dma->txchan = dma_request_slave_channel_compat(mask,
+						       dma->fn, dma->tx_param,
+						       p->port.dev, "tx");
 	if (!dma->txchan) {
 		dma_release_channel(dma->rxchan);
 		return -ENODEV;
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index db0e66f6dd0e..d07b6af3a937 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -26,6 +26,8 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
 
 #include "8250.h"
 
@@ -34,9 +36,6 @@
 #define DW_UART_CPR	0xf4 /* Component Parameter Register */
 #define DW_UART_UCV	0xf8 /* UART Component Version */
 
-/* Intel Low Power Subsystem specific */
-#define LPSS_PRV_CLOCK_PARAMS 0x800
-
 /* Component Parameter Register bits */
 #define DW_UART_CPR_ABP_DATA_WIDTH	(3 << 0)
 #define DW_UART_CPR_AFCE_MODE		(1 << 4)
@@ -55,8 +54,9 @@
 
 
 struct dw8250_data {
-	int	last_lcr;
-	int	line;
+	int		last_lcr;
+	int		line;
+	struct clk	*clk;
 };
 
 static void dw8250_serial_out(struct uart_port *p, int offset, int value)
@@ -113,6 +113,18 @@ static int dw8250_handle_irq(struct uart_port *p)
 	return 0;
 }
 
+static void
+dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
+{
+	if (!state)
+		pm_runtime_get_sync(port->dev);
+
+	serial8250_do_pm(port, state, old);
+
+	if (state)
+		pm_runtime_put_sync_suspend(port->dev);
+}
+
 static int dw8250_probe_of(struct uart_port *p)
 {
 	struct device_node	*np = p->dev->of_node;
@@ -136,8 +148,13 @@ static int dw8250_probe_of(struct uart_port *p)
 	if (!of_property_read_u32(np, "reg-shift", &val))
 		p->regshift = val;
 
+	/* clock got configured through clk api, all done */
+	if (p->uartclk)
+		return 0;
+
+	/* try to find out clock frequency from DT as fallback */
 	if (of_property_read_u32(np, "clock-frequency", &val)) {
-		dev_err(p->dev, "no clock-frequency property set\n");
+		dev_err(p->dev, "clk or clock-frequency not defined\n");
 		return -EINVAL;
 	}
 	p->uartclk = val;
@@ -146,67 +163,10 @@ static int dw8250_probe_of(struct uart_port *p)
 }
 
 #ifdef CONFIG_ACPI
-static bool dw8250_acpi_dma_filter(struct dma_chan *chan, void *parm)
-{
-	return chan->chan_id == *(int *)parm;
-}
-
-static acpi_status
-dw8250_acpi_walk_resource(struct acpi_resource *res, void *data)
-{
-	struct uart_port		*p = data;
-	struct uart_8250_port		*port;
-	struct uart_8250_dma		*dma;
-	struct acpi_resource_fixed_dma	*fixed_dma;
-	struct dma_slave_config		*slave;
-
-	port = container_of(p, struct uart_8250_port, port);
-
-	switch (res->type) {
-	case ACPI_RESOURCE_TYPE_FIXED_DMA:
-		fixed_dma = &res->data.fixed_dma;
-
-		/* TX comes first */
-		if (!port->dma) {
-			dma = devm_kzalloc(p->dev, sizeof(*dma), GFP_KERNEL);
-			if (!dma)
-				return AE_NO_MEMORY;
-
-			port->dma = dma;
-			slave = &dma->txconf;
-
-			slave->direction	= DMA_MEM_TO_DEV;
-			slave->dst_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE;
-			slave->slave_id		= fixed_dma->request_lines;
-			slave->dst_maxburst	= port->tx_loadsz / 4;
-
-			dma->tx_chan_id		= fixed_dma->channels;
-			dma->tx_param		= &dma->tx_chan_id;
-			dma->fn			= dw8250_acpi_dma_filter;
-		} else {
-			dma = port->dma;
-			slave = &dma->rxconf;
-
-			slave->direction	= DMA_DEV_TO_MEM;
-			slave->src_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE;
-			slave->slave_id		= fixed_dma->request_lines;
-			slave->src_maxburst	= p->fifosize / 4;
-
-			dma->rx_chan_id		= fixed_dma->channels;
-			dma->rx_param		= &dma->rx_chan_id;
-		}
-
-		break;
-	}
-
-	return AE_OK;
-}
-
-static int dw8250_probe_acpi(struct uart_port *p)
+static int dw8250_probe_acpi(struct uart_8250_port *up)
 {
 	const struct acpi_device_id *id;
-	acpi_status status;
-	u32 reg;
+	struct uart_port *p = &up->port;
 
 	id = acpi_match_device(p->dev->driver->acpi_match_table, p->dev);
 	if (!id)
@@ -216,26 +176,21 @@ static int dw8250_probe_acpi(struct uart_port *p)
 	p->serial_in = dw8250_serial_in32;
 	p->serial_out = dw8250_serial_out32;
 	p->regshift = 2;
-	p->uartclk = (unsigned int)id->driver_data;
 
-	status = acpi_walk_resources(ACPI_HANDLE(p->dev), METHOD_NAME__CRS,
-				     dw8250_acpi_walk_resource, p);
-	if (ACPI_FAILURE(status)) {
-		dev_err_ratelimited(p->dev, "%s failed \"%s\"\n", __func__,
-				    acpi_format_exception(status));
-		return -ENODEV;
-	}
+	if (!p->uartclk)
+		p->uartclk = (unsigned int)id->driver_data;
 
-	/* Fix Haswell issue where the clocks do not get enabled */
-	if (!strcmp(id->id, "INT33C4") || !strcmp(id->id, "INT33C5")) {
-		reg = readl(p->membase + LPSS_PRV_CLOCK_PARAMS);
-		writel(reg | 1, p->membase + LPSS_PRV_CLOCK_PARAMS);
-	}
+	up->dma = devm_kzalloc(p->dev, sizeof(*up->dma), GFP_KERNEL);
+	if (!up->dma)
+		return -ENOMEM;
+
+	up->dma->rxconf.src_maxburst = p->fifosize / 4;
+	up->dma->txconf.dst_maxburst = p->fifosize / 4;
 
 	return 0;
 }
 #else
-static inline int dw8250_probe_acpi(struct uart_port *p)
+static inline int dw8250_probe_acpi(struct uart_8250_port *up)
 {
 	return -ENODEV;
 }
@@ -266,7 +221,11 @@ static void dw8250_setup_port(struct uart_8250_port *up)
 		p->flags |= UPF_FIXED_TYPE;
 		p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
 		up->tx_loadsz = p->fifosize;
+		up->capabilities = UART_CAP_FIFO;
 	}
+
+	if (reg & DW_UART_CPR_AFCE_MODE)
+		up->capabilities |= UART_CAP_AFE;
 }
 
 static int dw8250_probe(struct platform_device *pdev)
@@ -286,17 +245,30 @@ static int dw8250_probe(struct platform_device *pdev)
 	uart.port.mapbase = regs->start;
 	uart.port.irq = irq->start;
 	uart.port.handle_irq = dw8250_handle_irq;
+	uart.port.pm = dw8250_do_pm;
 	uart.port.type = PORT_8250;
 	uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
 	uart.port.dev = &pdev->dev;
 
-	uart.port.membase = ioremap(regs->start, resource_size(regs));
+	uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
+					 resource_size(regs));
 	if (!uart.port.membase)
 		return -ENOMEM;
 
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(data->clk)) {
+		clk_prepare_enable(data->clk);
+		uart.port.uartclk = clk_get_rate(data->clk);
+	}
+
 	uart.port.iotype = UPIO_MEM;
 	uart.port.serial_in = dw8250_serial_in;
 	uart.port.serial_out = dw8250_serial_out;
+	uart.port.private_data = data;
 
 	dw8250_setup_port(&uart);
 
@@ -305,25 +277,22 @@ static int dw8250_probe(struct platform_device *pdev)
 		if (err)
 			return err;
 	} else if (ACPI_HANDLE(&pdev->dev)) {
-		err = dw8250_probe_acpi(&uart.port);
+		err = dw8250_probe_acpi(&uart);
 		if (err)
 			return err;
 	} else {
 		return -ENODEV;
 	}
 
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	uart.port.private_data = data;
-
 	data->line = serial8250_register_8250_port(&uart);
 	if (data->line < 0)
 		return data->line;
 
 	platform_set_drvdata(pdev, data);
 
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	return 0;
 }
 
@@ -331,34 +300,66 @@ static int dw8250_remove(struct platform_device *pdev)
 {
 	struct dw8250_data *data = platform_get_drvdata(pdev);
 
+	pm_runtime_get_sync(&pdev->dev);
+
 	serial8250_unregister_port(data->line);
 
+	if (!IS_ERR(data->clk))
+		clk_disable_unprepare(data->clk);
+
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
 	return 0;
 }
 
 #ifdef CONFIG_PM
-static int dw8250_suspend(struct platform_device *pdev, pm_message_t state)
+static int dw8250_suspend(struct device *dev)
 {
-	struct dw8250_data *data = platform_get_drvdata(pdev);
+	struct dw8250_data *data = dev_get_drvdata(dev);
 
 	serial8250_suspend_port(data->line);
 
 	return 0;
 }
 
-static int dw8250_resume(struct platform_device *pdev)
+static int dw8250_resume(struct device *dev)
 {
-	struct dw8250_data *data = platform_get_drvdata(pdev);
+	struct dw8250_data *data = dev_get_drvdata(dev);
 
 	serial8250_resume_port(data->line);
 
 	return 0;
 }
-#else
-#define dw8250_suspend NULL
-#define dw8250_resume NULL
 #endif /* CONFIG_PM */
 
+#ifdef CONFIG_PM_RUNTIME
+static int dw8250_runtime_suspend(struct device *dev)
+{
+	struct dw8250_data *data = dev_get_drvdata(dev);
+
+	if (!IS_ERR(data->clk))
+		clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static int dw8250_runtime_resume(struct device *dev)
+{
+	struct dw8250_data *data = dev_get_drvdata(dev);
+
+	if (!IS_ERR(data->clk))
+		clk_prepare_enable(data->clk);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops dw8250_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dw8250_suspend, dw8250_resume)
+	SET_RUNTIME_PM_OPS(dw8250_runtime_suspend, dw8250_runtime_resume, NULL)
+};
+
 static const struct of_device_id dw8250_of_match[] = {
 	{ .compatible = "snps,dw-apb-uart" },
 	{ /* Sentinel */ }
@@ -366,8 +367,9 @@ static const struct of_device_id dw8250_of_match[] = {
 MODULE_DEVICE_TABLE(of, dw8250_of_match);
 
 static const struct acpi_device_id dw8250_acpi_match[] = {
-	{ "INT33C4", 100000000 },
-	{ "INT33C5", 100000000 },
+	{ "INT33C4", 0 },
+	{ "INT33C5", 0 },
+	{ "80860F0A", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
@@ -376,13 +378,12 @@ static struct platform_driver dw8250_platform_driver = {
 	.driver = {
 		.name		= "dw-apb-uart",
 		.owner		= THIS_MODULE,
+		.pm		= &dw8250_pm_ops,
 		.of_match_table	= dw8250_of_match,
 		.acpi_match_table = ACPI_PTR(dw8250_acpi_match),
 	},
 	.probe			= dw8250_probe,
 	.remove			= dw8250_remove,
-	.suspend		= dw8250_suspend,
-	.resume			= dw8250_resume,
 };
 
 module_platform_driver(dw8250_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index aa76825229dc..26e3a97ab157 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1554,6 +1554,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA	0xc001
 #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
 #define PCI_VENDOR_ID_WCH		0x4348
+#define PCI_DEVICE_ID_WCH_CH352_2S	0x3253
 #define PCI_DEVICE_ID_WCH_CH353_4S	0x3453
 #define PCI_DEVICE_ID_WCH_CH353_2S1PF	0x5046
 #define PCI_DEVICE_ID_WCH_CH353_2S1P	0x7053
@@ -2172,6 +2173,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice      = PCI_ANY_ID,
 		.setup          = pci_wch_ch353_setup,
 	},
+	/* WCH CH352 2S card (16550 clone) */
+	{
+		.vendor		= PCI_VENDOR_ID_WCH,
+		.device		= PCI_DEVICE_ID_WCH_CH352_2S,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_wch_ch353_setup,
+	},
 	/*
 	 * ASIX devices with FIFO bug
 	 */
@@ -4870,6 +4879,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_b0_bt_2_115200 },
 
+	{	PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_b0_bt_2_115200 },
+
 	/*
 	 * Commtech, Inc. Fastcom adapters
 	 */
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index b3455a970a1d..35d9ab95c5cb 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -429,7 +429,6 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
 	struct uart_8250_port uart;
 	int ret, line, flags = dev_id->driver_data;
-	struct resource *res = NULL;
 
 	if (flags & UNKNOWN_DEV) {
 		ret = serial_pnp_guess_board(dev);
@@ -440,12 +439,11 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	memset(&uart, 0, sizeof(uart));
 	if (pnp_irq_valid(dev, 0))
 		uart.port.irq = pnp_irq(dev, 0);
-	if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
-		res = pnp_get_resource(dev, IORESOURCE_IO, 2);
-	else if (pnp_port_valid(dev, 0))
-		res = pnp_get_resource(dev, IORESOURCE_IO, 0);
-	if (pnp_resource_enabled(res)) {
-		uart.port.iobase = res->start;
+	if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
+		uart.port.iobase = pnp_port_start(dev, 2);
+		uart.port.iotype = UPIO_PORT;
+	} else if (pnp_port_valid(dev, 0)) {
+		uart.port.iobase = pnp_port_start(dev, 0);
 		uart.port.iotype = UPIO_PORT;
 	} else if (pnp_mem_valid(dev, 0)) {
 		uart.port.mapbase = pnp_mem_start(dev, 0);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 2ef9537bcb2c..80fe91e64a52 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -33,6 +33,23 @@ config SERIAL_8250
 	  Most people will say Y or M here, so that they can use serial mice,
 	  modems and similar devices connecting to the standard serial ports.
 
+config SERIAL_8250_DEPRECATED_OPTIONS
+	bool "Support 8250_core.* kernel options (DEPRECATED)"
+	depends on SERIAL_8250
+	default y
+	---help---
+	  In 3.7 we renamed 8250 to 8250_core by mistake, so now we have to
+	  accept kernel parameters in both forms like 8250_core.nr_uarts=4 and
+	  8250.nr_uarts=4. We now renamed the module back to 8250, but if
+	  anybody noticed in 3.7 and changed their userspace we still have to
+	  keep the 8350_core.* options around until they revert the changes
+	  they already did.
+
+	  If 8250 is built as a module, this adds 8250_core alias instead. 
+
+	  If you did not notice yet and/or you have userspace from pre-3.7, it
+	  is safe (and recommended) to say N here.
+
 config SERIAL_8250_PNP
 	bool "8250/16550 PNP device support" if EXPERT
 	depends on SERIAL_8250 && PNP
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index a23838a4d535..36d68d054307 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -2,10 +2,10 @@
 # Makefile for the 8250 serial device drivers.
 #
 
-obj-$(CONFIG_SERIAL_8250)		+= 8250_core.o
-8250_core-y				:= 8250.o
-8250_core-$(CONFIG_SERIAL_8250_PNP)	+= 8250_pnp.o
-8250_core-$(CONFIG_SERIAL_8250_DMA)	+= 8250_dma.o
+obj-$(CONFIG_SERIAL_8250)		+= 8250.o
+8250-y					:= 8250_core.o
+8250-$(CONFIG_SERIAL_8250_PNP)		+= 8250_pnp.o
+8250-$(CONFIG_SERIAL_8250_DMA)		+= 8250_dma.o
 obj-$(CONFIG_SERIAL_8250_GSC)		+= 8250_gsc.o
 obj-$(CONFIG_SERIAL_8250_PCI)		+= 8250_pci.o
 obj-$(CONFIG_SERIAL_8250_HP300)		+= 8250_hp300.o
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index b7d48b346393..1b74b88e1e1e 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -852,18 +852,6 @@ static struct pcmcia_driver serial_cs_driver = {
 	.suspend	= serial_suspend,
 	.resume		= serial_resume,
 };
-
-static int __init init_serial_cs(void)
-{
-	return pcmcia_register_driver(&serial_cs_driver);
-}
-
-static void __exit exit_serial_cs(void)
-{
-	pcmcia_unregister_driver(&serial_cs_driver);
-}
-
-module_init(init_serial_cs);
-module_exit(exit_serial_cs);
+module_pcmcia_driver(serial_cs_driver);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3ea5408fcbeb..e2774f9ecd59 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -29,6 +29,7 @@
  * and hooked into this driver.
  */
 
+
 #if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
 #endif
@@ -72,32 +73,44 @@
 /* There is by now at least one vendor with differing details, so handle it */
 struct vendor_data {
 	unsigned int		ifls;
-	unsigned int		fifosize;
 	unsigned int		lcrh_tx;
 	unsigned int		lcrh_rx;
 	bool			oversampling;
 	bool			dma_threshold;
 	bool			cts_event_workaround;
+
+	unsigned int (*get_fifosize)(unsigned int periphid);
 };
 
+static unsigned int get_fifosize_arm(unsigned int periphid)
+{
+	unsigned int rev = (periphid >> 20) & 0xf;
+	return rev < 3 ? 16 : 32;
+}
+
 static struct vendor_data vendor_arm = {
 	.ifls			= UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
-	.fifosize		= 16,
 	.lcrh_tx		= UART011_LCRH,
 	.lcrh_rx		= UART011_LCRH,
 	.oversampling		= false,
 	.dma_threshold		= false,
 	.cts_event_workaround	= false,
+	.get_fifosize		= get_fifosize_arm,
 };
 
+static unsigned int get_fifosize_st(unsigned int periphid)
+{
+	return 64;
+}
+
 static struct vendor_data vendor_st = {
 	.ifls			= UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
-	.fifosize		= 64,
 	.lcrh_tx		= ST_UART011_LCRH_TX,
 	.lcrh_rx		= ST_UART011_LCRH_RX,
 	.oversampling		= true,
 	.dma_threshold		= true,
 	.cts_event_workaround	= true,
+	.get_fifosize		= get_fifosize_st,
 };
 
 static struct uart_amba_port *amba_ports[UART_NR];
@@ -117,6 +130,12 @@ struct pl011_dmarx_data {
 	struct pl011_sgbuf	sgbuf_b;
 	dma_cookie_t		cookie;
 	bool			running;
+	struct timer_list	timer;
+	unsigned int last_residue;
+	unsigned long last_jiffies;
+	bool auto_poll_rate;
+	unsigned int poll_rate;
+	unsigned int poll_timeout;
 };
 
 struct pl011_dmatx_data {
@@ -223,16 +242,18 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
 static int pl011_sgbuf_init(struct dma_chan *chan, struct pl011_sgbuf *sg,
 	enum dma_data_direction dir)
 {
-	sg->buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL);
+	dma_addr_t dma_addr;
+
+	sg->buf = dma_alloc_coherent(chan->device->dev,
+		PL011_DMA_BUFFER_SIZE, &dma_addr, GFP_KERNEL);
 	if (!sg->buf)
 		return -ENOMEM;
 
-	sg_init_one(&sg->sg, sg->buf, PL011_DMA_BUFFER_SIZE);
+	sg_init_table(&sg->sg, 1);
+	sg_set_page(&sg->sg, phys_to_page(dma_addr),
+		PL011_DMA_BUFFER_SIZE, offset_in_page(dma_addr));
+	sg_dma_address(&sg->sg) = dma_addr;
 
-	if (dma_map_sg(chan->device->dev, &sg->sg, 1, dir) != 1) {
-		kfree(sg->buf);
-		return -EINVAL;
-	}
 	return 0;
 }
 
@@ -240,12 +261,13 @@ static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg,
 	enum dma_data_direction dir)
 {
 	if (sg->buf) {
-		dma_unmap_sg(chan->device->dev, &sg->sg, 1, dir);
-		kfree(sg->buf);
+		dma_free_coherent(chan->device->dev,
+			PL011_DMA_BUFFER_SIZE, sg->buf,
+			sg_dma_address(&sg->sg));
 	}
 }
 
-static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
+static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *uap)
 {
 	/* DMA is the sole user of the platform data right now */
 	struct amba_pl011_data *plat = uap->port.dev->platform_data;
@@ -259,20 +281,25 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
 	struct dma_chan *chan;
 	dma_cap_mask_t mask;
 
-	/* We need platform data */
-	if (!plat || !plat->dma_filter) {
-		dev_info(uap->port.dev, "no DMA platform data\n");
-		return;
-	}
-
-	/* Try to acquire a generic DMA engine slave TX channel */
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
+	chan = dma_request_slave_channel(dev, "tx");
 
-	chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param);
 	if (!chan) {
-		dev_err(uap->port.dev, "no TX DMA channel!\n");
-		return;
+		/* We need platform data */
+		if (!plat || !plat->dma_filter) {
+			dev_info(uap->port.dev, "no DMA platform data\n");
+			return;
+		}
+
+		/* Try to acquire a generic DMA engine slave TX channel */
+		dma_cap_zero(mask);
+		dma_cap_set(DMA_SLAVE, mask);
+
+		chan = dma_request_channel(mask, plat->dma_filter,
+						plat->dma_tx_param);
+		if (!chan) {
+			dev_err(uap->port.dev, "no TX DMA channel!\n");
+			return;
+		}
 	}
 
 	dmaengine_slave_config(chan, &tx_conf);
@@ -282,7 +309,18 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
 		 dma_chan_name(uap->dmatx.chan));
 
 	/* Optionally make use of an RX channel as well */
-	if (plat->dma_rx_param) {
+	chan = dma_request_slave_channel(dev, "rx");
+	
+	if (!chan && plat->dma_rx_param) {
+		chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
+
+		if (!chan) {
+			dev_err(uap->port.dev, "no RX DMA channel!\n");
+			return;
+		}
+	}
+
+	if (chan) {
 		struct dma_slave_config rx_conf = {
 			.src_addr = uap->port.mapbase + UART01x_DR,
 			.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
@@ -291,15 +329,32 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
 			.device_fc = false,
 		};
 
-		chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
-		if (!chan) {
-			dev_err(uap->port.dev, "no RX DMA channel!\n");
-			return;
-		}
-
 		dmaengine_slave_config(chan, &rx_conf);
 		uap->dmarx.chan = chan;
 
+		if (plat && plat->dma_rx_poll_enable) {
+			/* Set poll rate if specified. */
+			if (plat->dma_rx_poll_rate) {
+				uap->dmarx.auto_poll_rate = false;
+				uap->dmarx.poll_rate = plat->dma_rx_poll_rate;
+			} else {
+				/*
+				 * 100 ms defaults to poll rate if not
+				 * specified. This will be adjusted with
+				 * the baud rate at set_termios.
+				 */
+				uap->dmarx.auto_poll_rate = true;
+				uap->dmarx.poll_rate =  100;
+			}
+			/* 3 secs defaults poll_timeout if not specified. */
+			if (plat->dma_rx_poll_timeout)
+				uap->dmarx.poll_timeout =
+					plat->dma_rx_poll_timeout;
+			else
+				uap->dmarx.poll_timeout = 3000;
+		} else
+			uap->dmarx.auto_poll_rate = false;
+
 		dev_info(uap->port.dev, "DMA channel RX %s\n",
 			 dma_chan_name(uap->dmarx.chan));
 	}
@@ -315,6 +370,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
 struct dma_uap {
 	struct list_head node;
 	struct uart_amba_port *uap;
+	struct device *dev;
 };
 
 static LIST_HEAD(pl011_dma_uarts);
@@ -325,7 +381,7 @@ static int __init pl011_dma_initcall(void)
 
 	list_for_each_safe(node, tmp, &pl011_dma_uarts) {
 		struct dma_uap *dmau = list_entry(node, struct dma_uap, node);
-		pl011_dma_probe_initcall(dmau->uap);
+		pl011_dma_probe_initcall(dmau->dev, dmau->uap);
 		list_del(node);
 		kfree(dmau);
 	}
@@ -334,18 +390,19 @@ static int __init pl011_dma_initcall(void)
 
 device_initcall(pl011_dma_initcall);
 
-static void pl011_dma_probe(struct uart_amba_port *uap)
+static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
 {
 	struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL);
 	if (dmau) {
 		dmau->uap = uap;
+		dmau->dev = dev;
 		list_add_tail(&dmau->node, &pl011_dma_uarts);
 	}
 }
 #else
-static void pl011_dma_probe(struct uart_amba_port *uap)
+static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
 {
-	pl011_dma_probe_initcall(uap);
+	pl011_dma_probe_initcall(dev, uap);
 }
 #endif
 
@@ -701,24 +758,30 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
 	struct tty_port *port = &uap->port.state->port;
 	struct pl011_sgbuf *sgbuf = use_buf_b ?
 		&uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
-	struct device *dev = uap->dmarx.chan->device->dev;
 	int dma_count = 0;
 	u32 fifotaken = 0; /* only used for vdbg() */
 
-	/* Pick everything from the DMA first */
+	struct pl011_dmarx_data *dmarx = &uap->dmarx;
+	int dmataken = 0;
+
+	if (uap->dmarx.poll_rate) {
+		/* The data can be taken by polling */
+		dmataken = sgbuf->sg.length - dmarx->last_residue;
+		/* Recalculate the pending size */
+		if (pending >= dmataken)
+			pending -= dmataken;
+	}
+
+	/* Pick the remain data from the DMA */
 	if (pending) {
-		/* Sync in buffer */
-		dma_sync_sg_for_cpu(dev, &sgbuf->sg, 1, DMA_FROM_DEVICE);
 
 		/*
 		 * First take all chars in the DMA pipe, then look in the FIFO.
 		 * Note that tty_insert_flip_buf() tries to take as many chars
 		 * as it can.
 		 */
-		dma_count = tty_insert_flip_string(port, sgbuf->buf, pending);
-
-		/* Return buffer to device */
-		dma_sync_sg_for_device(dev, &sgbuf->sg, 1, DMA_FROM_DEVICE);
+		dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken,
+				pending);
 
 		uap->port.icount.rx += dma_count;
 		if (dma_count < pending)
@@ -726,6 +789,10 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
 				 "couldn't insert all characters (TTY is full?)\n");
 	}
 
+	/* Reset the last_residue for Rx DMA poll */
+	if (uap->dmarx.poll_rate)
+		dmarx->last_residue = sgbuf->sg.length;
+
 	/*
 	 * Only continue with trying to read the FIFO if all DMA chars have
 	 * been taken first.
@@ -865,6 +932,57 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
 	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
 }
 
+/*
+ * Timer handler for Rx DMA polling.
+ * Every polling, It checks the residue in the dma buffer and transfer
+ * data to the tty. Also, last_residue is updated for the next polling.
+ */
+static void pl011_dma_rx_poll(unsigned long args)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)args;
+	struct tty_port *port = &uap->port.state->port;
+	struct pl011_dmarx_data *dmarx = &uap->dmarx;
+	struct dma_chan *rxchan = uap->dmarx.chan;
+	unsigned long flags = 0;
+	unsigned int dmataken = 0;
+	unsigned int size = 0;
+	struct pl011_sgbuf *sgbuf;
+	int dma_count;
+	struct dma_tx_state state;
+
+	sgbuf = dmarx->use_buf_b ? &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
+	rxchan->device->device_tx_status(rxchan, dmarx->cookie, &state);
+	if (likely(state.residue < dmarx->last_residue)) {
+		dmataken = sgbuf->sg.length - dmarx->last_residue;
+		size = dmarx->last_residue - state.residue;
+		dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken,
+				size);
+		if (dma_count == size)
+			dmarx->last_residue =  state.residue;
+		dmarx->last_jiffies = jiffies;
+	}
+	tty_flip_buffer_push(port);
+
+	/*
+	 * If no data is received in poll_timeout, the driver will fall back
+	 * to interrupt mode. We will retrigger DMA at the first interrupt.
+	 */
+	if (jiffies_to_msecs(jiffies - dmarx->last_jiffies)
+			> uap->dmarx.poll_timeout) {
+
+		spin_lock_irqsave(&uap->port.lock, flags);
+		pl011_dma_rx_stop(uap);
+		spin_unlock_irqrestore(&uap->port.lock, flags);
+
+		uap->dmarx.running = false;
+		dmaengine_terminate_all(rxchan);
+		del_timer(&uap->dmarx.timer);
+	} else {
+		mod_timer(&uap->dmarx.timer,
+			jiffies + msecs_to_jiffies(uap->dmarx.poll_rate));
+	}
+}
+
 static void pl011_dma_startup(struct uart_amba_port *uap)
 {
 	int ret;
@@ -927,6 +1045,16 @@ skip_rx:
 		if (pl011_dma_rx_trigger_dma(uap))
 			dev_dbg(uap->port.dev, "could not trigger initial "
 				"RX DMA job, fall back to interrupt mode\n");
+		if (uap->dmarx.poll_rate) {
+			init_timer(&(uap->dmarx.timer));
+			uap->dmarx.timer.function = pl011_dma_rx_poll;
+			uap->dmarx.timer.data = (unsigned long)uap;
+			mod_timer(&uap->dmarx.timer,
+				jiffies +
+				msecs_to_jiffies(uap->dmarx.poll_rate));
+			uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE;
+			uap->dmarx.last_jiffies = jiffies;
+		}
 	}
 }
 
@@ -962,6 +1090,8 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
 		/* Clean up the RX DMA */
 		pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a, DMA_FROM_DEVICE);
 		pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_b, DMA_FROM_DEVICE);
+		if (uap->dmarx.poll_rate)
+			del_timer_sync(&uap->dmarx.timer);
 		uap->using_rx_dma = false;
 	}
 }
@@ -976,10 +1106,9 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
 	return uap->using_rx_dma && uap->dmarx.running;
 }
 
-
 #else
 /* Blank functions if the DMA engine is not available */
-static inline void pl011_dma_probe(struct uart_amba_port *uap)
+static inline void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
 {
 }
 
@@ -1088,8 +1217,20 @@ static void pl011_rx_chars(struct uart_amba_port *uap)
 			dev_dbg(uap->port.dev, "could not trigger RX DMA job "
 				"fall back to interrupt mode again\n");
 			uap->im |= UART011_RXIM;
-		} else
+		} else {
 			uap->im &= ~UART011_RXIM;
+#ifdef CONFIG_DMA_ENGINE
+			/* Start Rx DMA poll */
+			if (uap->dmarx.poll_rate) {
+				uap->dmarx.last_jiffies = jiffies;
+				uap->dmarx.last_residue	= PL011_DMA_BUFFER_SIZE;
+				mod_timer(&uap->dmarx.timer,
+					jiffies +
+					msecs_to_jiffies(uap->dmarx.poll_rate));
+			}
+#endif
+		}
+
 		writew(uap->im, uap->port.membase + UART011_IMSC);
 	}
 	spin_lock(&uap->port.lock);
@@ -1164,7 +1305,6 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 	unsigned int dummy_read;
 
 	spin_lock_irqsave(&uap->port.lock, flags);
-
 	status = readw(uap->port.membase + UART011_MIS);
 	if (status) {
 		do {
@@ -1551,6 +1691,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	 */
 	baud = uart_get_baud_rate(port, termios, old, 0,
 				  port->uartclk / clkdiv);
+#ifdef CONFIG_DMA_ENGINE
+	/*
+	 * Adjust RX DMA polling rate with baud rate if not specified.
+	 */
+	if (uap->dmarx.auto_poll_rate)
+		uap->dmarx.poll_rate = DIV_ROUND_UP(10000000, baud);
+#endif
 
 	if (baud > port->uartclk/16)
 		quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud);
@@ -2010,7 +2157,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	uap->lcrh_rx = vendor->lcrh_rx;
 	uap->lcrh_tx = vendor->lcrh_tx;
 	uap->old_cr = 0;
-	uap->fifosize = vendor->fifosize;
+	uap->fifosize = vendor->get_fifosize(dev->periphid);
 	uap->port.dev = &dev->dev;
 	uap->port.mapbase = dev->res.start;
 	uap->port.membase = base;
@@ -2020,7 +2167,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	uap->port.ops = &amba_pl011_pops;
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = i;
-	pl011_dma_probe(uap);
+	pl011_dma_probe(&dev->dev, uap);
 
 	/* Ensure interrupts from this UART are masked and cleared */
 	writew(0, uap->port.membase + UART011_IMSC);
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index d97e194b6bc5..cbf1d155b7b2 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -162,7 +162,7 @@ static unsigned int arc_serial_tx_empty(struct uart_port *port)
 /*
  * Driver internal routine, used by both tty(serial core) as well as tx-isr
  *  -Called under spinlock in either cases
- *  -also tty->stopped / tty->hw_stopped has already been checked
+ *  -also tty->stopped has already been checked
  *     = by uart_start( ) before calling us
  *     = tx_ist checks that too before calling
  */
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index d4a7c241b751..3467462869ce 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -158,7 +158,7 @@ struct atmel_uart_port {
 };
 
 static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-static unsigned long atmel_ports_in_use;
+static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART);
 
 #ifdef SUPPORT_SYSRQ
 static struct console atmel_console;
@@ -1769,15 +1769,14 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	if (ret < 0)
 		/* port id not found in platform data nor device-tree aliases:
 		 * auto-enumerate it */
-		ret = find_first_zero_bit(&atmel_ports_in_use,
-				sizeof(atmel_ports_in_use));
+		ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART);
 
-	if (ret > ATMEL_MAX_UART) {
+	if (ret >= ATMEL_MAX_UART) {
 		ret = -ENODEV;
 		goto err;
 	}
 
-	if (test_and_set_bit(ret, &atmel_ports_in_use)) {
+	if (test_and_set_bit(ret, atmel_ports_in_use)) {
 		/* port already in use */
 		ret = -EBUSY;
 		goto err;
@@ -1857,7 +1856,7 @@ static int atmel_serial_remove(struct platform_device *pdev)
 
 	/* "port" is allocated statically, so we shouldn't free it */
 
-	clear_bit(port->line, &atmel_ports_in_use);
+	clear_bit(port->line, atmel_ports_in_use);
 
 	clk_put(atmel_port->clk);
 
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 52a3ecd40421..6fa2ae77fffd 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -30,7 +30,6 @@
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 
-#include <bcm63xx_clk.h>
 #include <bcm63xx_irq.h>
 #include <bcm63xx_regs.h>
 #include <bcm63xx_io.h>
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 12dceda9db33..26a3be7ced7d 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -1011,24 +1011,6 @@ static int bfin_serial_poll_get_char(struct uart_port *port)
 }
 #endif
 
-#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
-	defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
-static void bfin_kgdboc_port_shutdown(struct uart_port *port)
-{
-	if (kgdboc_break_enabled) {
-		kgdboc_break_enabled = 0;
-		bfin_serial_shutdown(port);
-	}
-}
-
-static int bfin_kgdboc_port_startup(struct uart_port *port)
-{
-	kgdboc_port_line = port->line;
-	kgdboc_break_enabled = !bfin_serial_startup(port);
-	return 0;
-}
-#endif
-
 static struct uart_ops bfin_serial_pops = {
 	.tx_empty	= bfin_serial_tx_empty,
 	.set_mctrl	= bfin_serial_set_mctrl,
@@ -1047,11 +1029,6 @@ static struct uart_ops bfin_serial_pops = {
 	.request_port	= bfin_serial_request_port,
 	.config_port	= bfin_serial_config_port,
 	.verify_port	= bfin_serial_verify_port,
-#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
-	defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
-	.kgdboc_port_startup	= bfin_kgdboc_port_startup,
-	.kgdboc_port_shutdown	= bfin_kgdboc_port_shutdown,
-#endif
 #ifdef CONFIG_CONSOLE_POLL
 	.poll_put_char	= bfin_serial_poll_put_char,
 	.poll_get_char	= bfin_serial_poll_get_char,
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 5f37c31e32bc..477f22f773fc 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -169,7 +169,6 @@ static int get_lsr_info(struct e100_serial *info, unsigned int *value);
 
 
 #define DEF_BAUD 115200   /* 115.2 kbit/s */
-#define STD_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
 #define DEF_RX 0x20  /* or SERIAL_CTRL_W >> 8 */
 /* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */
 #define DEF_TX 0x80  /* or SERIAL_CTRL_B */
@@ -246,7 +245,6 @@ static struct e100_serial rs_table[] = {
 	  .ifirstadr   = R_DMA_CH7_FIRST,
 	  .icmdadr     = R_DMA_CH7_CMD,
 	  .idescradr   = R_DMA_CH7_DESCR,
-	  .flags       = STD_FLAGS,
 	  .rx_ctrl     = DEF_RX,
 	  .tx_ctrl     = DEF_TX,
 	  .iseteop     = 2,
@@ -300,7 +298,6 @@ static struct e100_serial rs_table[] = {
 	  .ifirstadr   = R_DMA_CH9_FIRST,
 	  .icmdadr     = R_DMA_CH9_CMD,
 	  .idescradr   = R_DMA_CH9_DESCR,
-	  .flags       = STD_FLAGS,
 	  .rx_ctrl     = DEF_RX,
 	  .tx_ctrl     = DEF_TX,
 	  .iseteop     = 3,
@@ -356,7 +353,6 @@ static struct e100_serial rs_table[] = {
 	  .ifirstadr   = R_DMA_CH3_FIRST,
 	  .icmdadr     = R_DMA_CH3_CMD,
 	  .idescradr   = R_DMA_CH3_DESCR,
-	  .flags       = STD_FLAGS,
 	  .rx_ctrl     = DEF_RX,
 	  .tx_ctrl     = DEF_TX,
 	  .iseteop     = 0,
@@ -410,7 +406,6 @@ static struct e100_serial rs_table[] = {
 	  .ifirstadr   = R_DMA_CH5_FIRST,
 	  .icmdadr     = R_DMA_CH5_CMD,
 	  .idescradr   = R_DMA_CH5_DESCR,
-	  .flags       = STD_FLAGS,
 	  .rx_ctrl     = DEF_RX,
 	  .tx_ctrl     = DEF_TX,
 	  .iseteop     = 1,
@@ -2263,8 +2258,7 @@ TODO: The break will be delayed until an F or V character is received.
 
 */
 
-static
-struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
+static void handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
 {
 	unsigned long data_read;
 
@@ -2370,10 +2364,9 @@ more_data:
 	}
 
 	tty_flip_buffer_push(&info->port);
-	return info;
 }
 
-static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
+static void handle_ser_rx_interrupt(struct e100_serial *info)
 {
 	unsigned char rstat;
 
@@ -2382,7 +2375,8 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
 #endif
 /*	DEBUG_LOG(info->line, "ser_interrupt stat %03X\n", rstat | (i << 8)); */
 	if (!info->uses_dma_in) {
-		return handle_ser_rx_interrupt_no_dma(info);
+		handle_ser_rx_interrupt_no_dma(info);
+		return;
 	}
 	/* DMA is used */
 	rstat = info->ioport[REG_STATUS];
@@ -2489,7 +2483,6 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
 	/* Restarting the DMA never hurts */
 	*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
 	START_FLUSH_FAST_TIMER(info, "ser_int");
-	return info;
 } /* handle_ser_rx_interrupt */
 
 static void handle_ser_tx_interrupt(struct e100_serial *info)
@@ -2534,8 +2527,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
 	}
 	/* Normal char-by-char interrupt */
 	if (info->xmit.head == info->xmit.tail
-	    || info->port.tty->stopped
-	    || info->port.tty->hw_stopped) {
+	    || info->port.tty->stopped) {
 		DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n",
 				info->port.tty->stopped));
 		e100_disable_serial_tx_ready_irq(info);
@@ -2722,7 +2714,7 @@ startup(struct e100_serial * info)
 
 	/* if it was already initialized, skip this */
 
-	if (info->flags & ASYNC_INITIALIZED) {
+	if (info->port.flags & ASYNC_INITIALIZED) {
 		local_irq_restore(flags);
 		free_page(xmit_page);
 		return 0;
@@ -2847,7 +2839,7 @@ startup(struct e100_serial * info)
 
 #endif /* CONFIG_SVINTO_SIM */
 
-	info->flags |= ASYNC_INITIALIZED;
+	info->port.flags |= ASYNC_INITIALIZED;
 
 	local_irq_restore(flags);
 	return 0;
@@ -2892,7 +2884,7 @@ shutdown(struct e100_serial * info)
 
 #endif /* CONFIG_SVINTO_SIM */
 
-	if (!(info->flags & ASYNC_INITIALIZED))
+	if (!(info->port.flags & ASYNC_INITIALIZED))
 		return;
 
 #ifdef SERIAL_DEBUG_OPEN
@@ -2923,7 +2915,7 @@ shutdown(struct e100_serial * info)
 	if (info->port.tty)
 		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-	info->flags &= ~ASYNC_INITIALIZED;
+	info->port.flags &= ~ASYNC_INITIALIZED;
 	local_irq_restore(flags);
 }
 
@@ -2948,7 +2940,7 @@ change_speed(struct e100_serial *info)
 	/* possibly, the tx/rx should be disabled first to do this safely */
 
 	/* change baud-rate and write it to the hardware */
-	if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) {
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) {
 		/* Special baudrate */
 		u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */
 		unsigned long alt_source =
@@ -3098,7 +3090,6 @@ rs_flush_chars(struct tty_struct *tty)
 	if (info->tr_running ||
 	    info->xmit.head == info->xmit.tail ||
 	    tty->stopped ||
-	    tty->hw_stopped ||
 	    !info->xmit.buf)
 		return;
 
@@ -3176,7 +3167,6 @@ static int rs_raw_write(struct tty_struct *tty,
 
 	if (info->xmit.head != info->xmit.tail &&
 	    !tty->stopped &&
-	    !tty->hw_stopped &&
 	    !info->tr_running) {
 		start_transmit(info);
 	}
@@ -3400,10 +3390,10 @@ get_serial_info(struct e100_serial * info,
 	tmp.line = info->line;
 	tmp.port = (int)info->ioport;
 	tmp.irq = info->irq;
-	tmp.flags = info->flags;
+	tmp.flags = info->port.flags;
 	tmp.baud_base = info->baud_base;
-	tmp.close_delay = info->close_delay;
-	tmp.closing_wait = info->closing_wait;
+	tmp.close_delay = info->port.close_delay;
+	tmp.closing_wait = info->port.closing_wait;
 	tmp.custom_divisor = info->custom_divisor;
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
@@ -3425,16 +3415,16 @@ set_serial_info(struct e100_serial *info,
 
 	if (!capable(CAP_SYS_ADMIN)) {
 		if ((new_serial.type != info->type) ||
-		    (new_serial.close_delay != info->close_delay) ||
+		    (new_serial.close_delay != info->port.close_delay) ||
 		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
-		     (info->flags & ~ASYNC_USR_MASK)))
+		     (info->port.flags & ~ASYNC_USR_MASK)))
 			return -EPERM;
-		info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+		info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
 			       (new_serial.flags & ASYNC_USR_MASK));
 		goto check_and_exit;
 	}
 
-	if (info->count > 1)
+	if (info->port.count > 1)
 		return -EBUSY;
 
 	/*
@@ -3443,16 +3433,16 @@ set_serial_info(struct e100_serial *info,
 	 */
 
 	info->baud_base = new_serial.baud_base;
-	info->flags = ((info->flags & ~ASYNC_FLAGS) |
+	info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) |
 		       (new_serial.flags & ASYNC_FLAGS));
 	info->custom_divisor = new_serial.custom_divisor;
 	info->type = new_serial.type;
-	info->close_delay = new_serial.close_delay;
-	info->closing_wait = new_serial.closing_wait;
-	info->port.low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	info->port.close_delay = new_serial.close_delay;
+	info->port.closing_wait = new_serial.closing_wait;
+	info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
  check_and_exit:
-	if (info->flags & ASYNC_INITIALIZED) {
+	if (info->port.flags & ASYNC_INITIALIZED) {
 		change_speed(info);
 	} else
 		retval = startup(info);
@@ -3733,10 +3723,8 @@ rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios.c_cflag & CRTSCTS)) {
-		tty->hw_stopped = 0;
+	    !(tty->termios.c_cflag & CRTSCTS))
 		rs_start(tty);
-	}
 
 }
 
@@ -3772,7 +3760,7 @@ rs_close(struct tty_struct *tty, struct file * filp)
 	printk("[%d] rs_close ttyS%d, count = %d\n", current->pid,
 	       info->line, info->count);
 #endif
-	if ((tty->count == 1) && (info->count != 1)) {
+	if ((tty->count == 1) && (info->port.count != 1)) {
 		/*
 		 * Uh, oh.  tty->count is 1, which means that the tty
 		 * structure will be freed.  Info->count should always
@@ -3782,32 +3770,32 @@ rs_close(struct tty_struct *tty, struct file * filp)
 		 */
 		printk(KERN_ERR
 		       "rs_close: bad serial port count; tty->count is 1, "
-		       "info->count is %d\n", info->count);
-		info->count = 1;
+		       "info->count is %d\n", info->port.count);
+		info->port.count = 1;
 	}
-	if (--info->count < 0) {
+	if (--info->port.count < 0) {
 		printk(KERN_ERR "rs_close: bad serial port count for ttyS%d: %d\n",
-		       info->line, info->count);
-		info->count = 0;
+		       info->line, info->port.count);
+		info->port.count = 0;
 	}
-	if (info->count) {
+	if (info->port.count) {
 		local_irq_restore(flags);
 		return;
 	}
-	info->flags |= ASYNC_CLOSING;
+	info->port.flags |= ASYNC_CLOSING;
 	/*
 	 * Save the termios structure, since this port may have
 	 * separate termios for callout and dialin.
 	 */
-	if (info->flags & ASYNC_NORMAL_ACTIVE)
+	if (info->port.flags & ASYNC_NORMAL_ACTIVE)
 		info->normal_termios = tty->termios;
 	/*
 	 * Now we wait for the transmit buffer to clear; and we notify
 	 * the line discipline to only process XON/XOFF characters.
 	 */
 	tty->closing = 1;
-	if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->closing_wait);
+	if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, info->port.closing_wait);
 	/*
 	 * At this point we stop accepting input.  To do this, we
 	 * disable the serial receiver and the DMA receive interrupt.
@@ -3820,7 +3808,7 @@ rs_close(struct tty_struct *tty, struct file * filp)
 	e100_disable_rx(info);
 	e100_disable_rx_irq(info);
 
-	if (info->flags & ASYNC_INITIALIZED) {
+	if (info->port.flags & ASYNC_INITIALIZED) {
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
 		 * has completely drained; this is especially
@@ -3836,13 +3824,13 @@ rs_close(struct tty_struct *tty, struct file * filp)
 	tty->closing = 0;
 	info->event = 0;
 	info->port.tty = NULL;
-	if (info->blocked_open) {
-		if (info->close_delay)
-			schedule_timeout_interruptible(info->close_delay);
-		wake_up_interruptible(&info->open_wait);
+	if (info->port.blocked_open) {
+		if (info->port.close_delay)
+			schedule_timeout_interruptible(info->port.close_delay);
+		wake_up_interruptible(&info->port.open_wait);
 	}
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-	wake_up_interruptible(&info->close_wait);
+	info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+	wake_up_interruptible(&info->port.close_wait);
 	local_irq_restore(flags);
 
 	/* port closed */
@@ -3935,10 +3923,10 @@ rs_hangup(struct tty_struct *tty)
 	rs_flush_buffer(tty);
 	shutdown(info);
 	info->event = 0;
-	info->count = 0;
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->port.count = 0;
+	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 	info->port.tty = NULL;
-	wake_up_interruptible(&info->open_wait);
+	wake_up_interruptible(&info->port.open_wait);
 }
 
 /*
@@ -3960,11 +3948,11 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 	 * until it's done, and then try again.
 	 */
 	if (tty_hung_up_p(filp) ||
-	    (info->flags & ASYNC_CLOSING)) {
-		wait_event_interruptible_tty(tty, info->close_wait,
-			!(info->flags & ASYNC_CLOSING));
+	    (info->port.flags & ASYNC_CLOSING)) {
+		wait_event_interruptible_tty(tty, info->port.close_wait,
+			!(info->port.flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
-		if (info->flags & ASYNC_HUP_NOTIFY)
+		if (info->port.flags & ASYNC_HUP_NOTIFY)
 			return -EAGAIN;
 		else
 			return -ERESTARTSYS;
@@ -3979,7 +3967,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 	 */
 	if ((filp->f_flags & O_NONBLOCK) ||
 	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		info->flags |= ASYNC_NORMAL_ACTIVE;
+		info->port.flags |= ASYNC_NORMAL_ACTIVE;
 		return 0;
 	}
 
@@ -3990,23 +3978,23 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 	/*
 	 * Block waiting for the carrier detect and the line to become
 	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
+	 * this loop, info->port.count is dropped by one, so that
 	 * rs_close() knows when to free things.  We restore it upon
 	 * exit, either normal or abnormal.
 	 */
 	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
+	add_wait_queue(&info->port.open_wait, &wait);
 #ifdef SERIAL_DEBUG_OPEN
 	printk("block_til_ready before block: ttyS%d, count = %d\n",
-	       info->line, info->count);
+	       info->line, info->port.count);
 #endif
 	local_irq_save(flags);
 	if (!tty_hung_up_p(filp)) {
 		extra_count++;
-		info->count--;
+		info->port.count--;
 	}
 	local_irq_restore(flags);
-	info->blocked_open++;
+	info->port.blocked_open++;
 	while (1) {
 		local_irq_save(flags);
 		/* assert RTS and DTR */
@@ -4015,9 +4003,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 		local_irq_restore(flags);
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (tty_hung_up_p(filp) ||
-		    !(info->flags & ASYNC_INITIALIZED)) {
+		    !(info->port.flags & ASYNC_INITIALIZED)) {
 #ifdef SERIAL_DO_RESTART
-			if (info->flags & ASYNC_HUP_NOTIFY)
+			if (info->port.flags & ASYNC_HUP_NOTIFY)
 				retval = -EAGAIN;
 			else
 				retval = -ERESTARTSYS;
@@ -4026,7 +4014,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 #endif
 			break;
 		}
-		if (!(info->flags & ASYNC_CLOSING) && do_clocal)
+		if (!(info->port.flags & ASYNC_CLOSING) && do_clocal)
 			/* && (do_clocal || DCD_IS_ASSERTED) */
 			break;
 		if (signal_pending(current)) {
@@ -4035,24 +4023,24 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 		}
 #ifdef SERIAL_DEBUG_OPEN
 		printk("block_til_ready blocking: ttyS%d, count = %d\n",
-		       info->line, info->count);
+		       info->line, info->port.count);
 #endif
 		tty_unlock(tty);
 		schedule();
 		tty_lock(tty);
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&info->open_wait, &wait);
+	remove_wait_queue(&info->port.open_wait, &wait);
 	if (extra_count)
-		info->count++;
-	info->blocked_open--;
+		info->port.count++;
+	info->port.blocked_open--;
 #ifdef SERIAL_DEBUG_OPEN
 	printk("block_til_ready after blocking: ttyS%d, count = %d\n",
-	       info->line, info->count);
+	       info->line, info->port.count);
 #endif
 	if (retval)
 		return retval;
-	info->flags |= ASYNC_NORMAL_ACTIVE;
+	info->port.flags |= ASYNC_NORMAL_ACTIVE;
 	return 0;
 }
 
@@ -4086,24 +4074,24 @@ rs_open(struct tty_struct *tty, struct file * filp)
 
 #ifdef SERIAL_DEBUG_OPEN
         printk("[%d] rs_open %s, count = %d\n", current->pid, tty->name,
- 	       info->count);
+ 	       info->port.count);
 #endif
 
-	info->count++;
+	info->port.count++;
 	tty->driver_data = info;
 	info->port.tty = tty;
 
-	info->port.low_latency = !!(info->flags & ASYNC_LOW_LATENCY);
+	info->port.low_latency = !!(info->port.flags & ASYNC_LOW_LATENCY);
 
 	/*
 	 * If the port is in the middle of closing, bail out now
 	 */
 	if (tty_hung_up_p(filp) ||
-	    (info->flags & ASYNC_CLOSING)) {
-		wait_event_interruptible_tty(tty, info->close_wait,
-			!(info->flags & ASYNC_CLOSING));
+	    (info->port.flags & ASYNC_CLOSING)) {
+		wait_event_interruptible_tty(tty, info->port.close_wait,
+			!(info->port.flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
-		return ((info->flags & ASYNC_HUP_NOTIFY) ?
+		return ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 			-EAGAIN : -ERESTARTSYS);
 #else
 		return -EAGAIN;
@@ -4113,7 +4101,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
 	/*
 	 * If DMA is enabled try to allocate the irq's.
 	 */
-	if (info->count == 1) {
+	if (info->port.count == 1) {
 		allocated_resources = 1;
 		if (info->dma_in_enabled) {
 			if (request_irq(info->dma_in_irq_nbr,
@@ -4186,7 +4174,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
 		if (allocated_resources)
 			deinit_port(info);
 
-		/* FIXME Decrease count info->count here too? */
+		/* FIXME Decrease count info->port.count here too? */
 		return retval;
 	}
 
@@ -4203,7 +4191,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
 		return retval;
 	}
 
-	if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
+	if ((info->port.count == 1) && (info->port.flags & ASYNC_SPLIT_TERMIOS)) {
 		tty->termios = info->normal_termios;
 		change_speed(info);
 	}
@@ -4256,9 +4244,6 @@ static void seq_line_info(struct seq_file *m, struct e100_serial *info)
 		if (info->port.tty->stopped)
 			seq_printf(m, " stopped:%i",
 				   (int)info->port.tty->stopped);
-		if (info->port.tty->hw_stopped)
-			seq_printf(m, " hw_stopped:%i",
-				   (int)info->port.tty->hw_stopped);
 	}
 
 	{
@@ -4455,16 +4440,9 @@ static int __init rs_init(void)
 		info->forced_eop = 0;
 		info->baud_base = DEF_BAUD_BASE;
 		info->custom_divisor = 0;
-		info->flags = 0;
-		info->close_delay = 5*HZ/10;
-		info->closing_wait = 30*HZ;
 		info->x_char = 0;
 		info->event = 0;
-		info->count = 0;
-		info->blocked_open = 0;
 		info->normal_termios = driver->init_termios;
-		init_waitqueue_head(&info->open_wait);
-		init_waitqueue_head(&info->close_wait);
 		info->xmit.buf = NULL;
 		info->xmit.tail = info->xmit.head = 0;
 		info->first_recv_buffer = info->last_recv_buffer = NULL;
diff --git a/drivers/tty/serial/crisv10.h b/drivers/tty/serial/crisv10.h
index ea0beb46a10d..7599014ae03f 100644
--- a/drivers/tty/serial/crisv10.h
+++ b/drivers/tty/serial/crisv10.h
@@ -53,8 +53,6 @@ struct e100_serial {
 	volatile u8 *icmdadr;		/* adr to R_DMA_CHx_CMD */
 	volatile u32 *idescradr;	/* adr to R_DMA_CHx_DESCR */
 
-	int flags;	/* defined in tty.h */
-
 	u8 rx_ctrl;	/* shadow for R_SERIALx_REC_CTRL */
 	u8 tx_ctrl;	/* shadow for R_SERIALx_TR_CTRL */
 	u8 iseteop;	/* bit number for R_SET_EOP for the input dma */
@@ -88,19 +86,10 @@ struct e100_serial {
 
 	volatile int		tr_running; /* 1 if output is running */
 
-	struct tty_struct	*tty;
-	int			read_status_mask;
-	int			ignore_status_mask;
 	int			x_char;	/* xon/xoff character */
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2;
 	unsigned long		event;
-	unsigned long		last_active;
 	int			line;
 	int			type;  /* PORT_ETRAX */
-	int			count;	    /* # of fd on device */
-	int			blocked_open; /* # of blocked opens */
 	struct circ_buf		xmit;
 	struct etrax_recv_buffer *first_recv_buffer;
 	struct etrax_recv_buffer *last_recv_buffer;
@@ -110,9 +99,6 @@ struct e100_serial {
 	struct work_struct	work;
 	struct async_icount	icount;   /* error-statistics etc.*/
 	struct ktermios		normal_termios;
-	struct ktermios		callout_termios;
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
 
 	unsigned long char_time_usec;       /* The time for 1 char, in usecs */
 	unsigned long flush_time_usec;      /* How often we should flush */
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index bc9e6b017b05..18ed5aebb166 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -1415,8 +1415,7 @@ static int icom_alloc_adapter(struct icom_adapter
 	struct icom_adapter *cur_adapter_entry;
 	struct list_head *tmp;
 
-	icom_adapter = (struct icom_adapter *)
-	    kzalloc(sizeof(struct icom_adapter), GFP_KERNEL);
+	icom_adapter = kzalloc(sizeof(struct icom_adapter), GFP_KERNEL);
 
 	if (!icom_adapter) {
 		return -ENOMEM;
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 68d7ce997ede..8b1534c424af 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -270,23 +270,6 @@ static void mrdy_assert(struct ifx_spi_device *ifx_dev)
 }
 
 /**
- *	ifx_spi_hangup		-	hang up an IFX device
- *	@ifx_dev: our SPI device
- *
- *	Hang up the tty attached to the IFX device if one is currently
- *	open. If not take no action
- */
-static void ifx_spi_ttyhangup(struct ifx_spi_device *ifx_dev)
-{
-	struct tty_port *pport = &ifx_dev->tty_port;
-	struct tty_struct *tty = tty_port_tty_get(pport);
-	if (tty) {
-		tty_hangup(tty);
-		tty_kref_put(tty);
-	}
-}
-
-/**
  *	ifx_spi_timeout		-	SPI timeout
  *	@arg: our SPI device
  *
@@ -298,7 +281,7 @@ static void ifx_spi_timeout(unsigned long arg)
 	struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *)arg;
 
 	dev_warn(&ifx_dev->spi_dev->dev, "*** SPI Timeout ***");
-	ifx_spi_ttyhangup(ifx_dev);
+	tty_port_tty_hangup(&ifx_dev->tty_port, false);
 	mrdy_set_low(ifx_dev);
 	clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
 }
@@ -443,25 +426,6 @@ static void ifx_spi_setup_spi_header(unsigned char *txbuffer, int tx_count,
 }
 
 /**
- *	ifx_spi_wakeup_serial	-	SPI space made
- *	@port_data: our SPI device
- *
- *	We have emptied the FIFO enough that we want to get more data
- *	queued into it. Poke the line discipline via tty_wakeup so that
- *	it will feed us more bits
- */
-static void ifx_spi_wakeup_serial(struct ifx_spi_device *ifx_dev)
-{
-	struct tty_struct *tty;
-
-	tty = tty_port_tty_get(&ifx_dev->tty_port);
-	if (!tty)
-		return;
-	tty_wakeup(tty);
-	tty_kref_put(tty);
-}
-
-/**
  *	ifx_spi_prepare_tx_buffer	-	prepare transmit frame
  *	@ifx_dev: our SPI device
  *
@@ -506,7 +470,7 @@ static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev)
 			tx_count += temp_count;
 			if (temp_count == queue_length)
 				/* poke port to get more data */
-				ifx_spi_wakeup_serial(ifx_dev);
+				tty_port_tty_wakeup(&ifx_dev->tty_port);
 			else /* more data in port, use next SPI message */
 				ifx_dev->spi_more = 1;
 		}
@@ -683,8 +647,6 @@ static void ifx_spi_insert_flip_string(struct ifx_spi_device *ifx_dev,
 static void ifx_spi_complete(void *ctx)
 {
 	struct ifx_spi_device *ifx_dev = ctx;
-	struct tty_struct *tty;
-	struct tty_ldisc *ldisc = NULL;
 	int length;
 	int actual_length;
 	unsigned char more;
@@ -762,15 +724,7 @@ complete_exit:
 			 */
 			ifx_spi_power_state_clear(ifx_dev,
 						  IFX_SPI_POWER_DATA_PENDING);
-			tty = tty_port_tty_get(&ifx_dev->tty_port);
-			if (tty) {
-				ldisc = tty_ldisc_ref(tty);
-				if (ldisc) {
-					ldisc->ops->write_wakeup(tty);
-					tty_ldisc_deref(ldisc);
-				}
-				tty_kref_put(tty);
-			}
+			tty_port_tty_wakeup(&ifx_dev->tty_port);
 		}
 	}
 }
@@ -962,7 +916,7 @@ static irqreturn_t ifx_spi_reset_interrupt(int irq, void *dev)
 		set_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state);
 		if (!solreset) {
 			/* unsolicited reset  */
-			ifx_spi_ttyhangup(ifx_dev);
+			tty_port_tty_hangup(&ifx_dev->tty_port, false);
 		}
 	} else {
 		/* exited reset */
@@ -1325,30 +1279,6 @@ static void ifx_spi_spi_shutdown(struct spi_device *spi)
  */
 
 /**
- *	ifx_spi_spi_suspend	-	suspend SPI on system suspend
- *	@dev: device being suspended
- *
- *	Suspend the SPI side. No action needed on Intel MID platforms, may
- *	need extending for other systems.
- */
-static int ifx_spi_spi_suspend(struct spi_device *spi, pm_message_t msg)
-{
-	return 0;
-}
-
-/**
- *	ifx_spi_spi_resume	-	resume SPI side on system resume
- *	@dev: device being suspended
- *
- *	Suspend the SPI side. No action needed on Intel MID platforms, may
- *	need extending for other systems.
- */
-static int ifx_spi_spi_resume(struct spi_device *spi)
-{
-	return 0;
-}
-
-/**
  *	ifx_spi_pm_suspend	-	suspend modem on system suspend
  *	@dev: device being suspended
  *
@@ -1437,8 +1367,6 @@ static struct spi_driver ifx_spi_driver = {
 	.probe = ifx_spi_spi_probe,
 	.shutdown = ifx_spi_spi_shutdown,
 	.remove = ifx_spi_spi_remove,
-	.suspend = ifx_spi_spi_suspend,
-	.resume = ifx_spi_spi_resume,
 	.id_table = ifx_id_table
 };
 
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 147c9e193595..8cdfbd365892 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -761,6 +761,8 @@ static int imx_startup(struct uart_port *port)
 
 	temp = readl(sport->port.membase + UCR2);
 	temp |= (UCR2_RXEN | UCR2_TXEN);
+	if (!sport->have_rtscts)
+		temp |= UCR2_IRTS;
 	writel(temp, sport->port.membase + UCR2);
 
 	if (USE_IRDA(sport)) {
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 00f250ae14c5..27bb75070c96 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -596,12 +596,6 @@ void jsm_input(struct jsm_channel *ch)
 
 	jsm_dbg(READ, &ch->ch_bd->pci_dev, "start 2\n");
 
-	if (data_len <= 0) {
-		spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-		jsm_dbg(READ, &ch->ch_bd->pci_dev, "jsm_input 1\n");
-		return;
-	}
-
 	len = tty_buffer_request_room(port, data_len);
 	n = len;
 
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 32517d4bceab..35866d5872ad 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -778,7 +778,7 @@ static int max3100_probe(struct spi_device *spi)
 	max3100s[i]->spi = spi;
 	max3100s[i]->irq = spi->irq;
 	spin_lock_init(&max3100s[i]->conf_lock);
-	dev_set_drvdata(&spi->dev, max3100s[i]);
+	spi_set_drvdata(spi, max3100s[i]);
 	pdata = spi->dev.platform_data;
 	max3100s[i]->crystal = pdata->crystal;
 	max3100s[i]->loopback = pdata->loopback;
@@ -819,7 +819,7 @@ static int max3100_probe(struct spi_device *spi)
 
 static int max3100_remove(struct spi_device *spi)
 {
-	struct max3100_port *s = dev_get_drvdata(&spi->dev);
+	struct max3100_port *s = spi_get_drvdata(spi);
 	int i;
 
 	mutex_lock(&max3100s_lock);
@@ -849,11 +849,11 @@ static int max3100_remove(struct spi_device *spi)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 
-static int max3100_suspend(struct spi_device *spi, pm_message_t state)
+static int max3100_suspend(struct device *dev)
 {
-	struct max3100_port *s = dev_get_drvdata(&spi->dev);
+	struct max3100_port *s = dev_get_drvdata(dev);
 
 	dev_dbg(&s->spi->dev, "%s\n", __func__);
 
@@ -874,9 +874,9 @@ static int max3100_suspend(struct spi_device *spi, pm_message_t state)
 	return 0;
 }
 
-static int max3100_resume(struct spi_device *spi)
+static int max3100_resume(struct device *dev)
 {
-	struct max3100_port *s = dev_get_drvdata(&spi->dev);
+	struct max3100_port *s = dev_get_drvdata(dev);
 
 	dev_dbg(&s->spi->dev, "%s\n", __func__);
 
@@ -894,21 +894,21 @@ static int max3100_resume(struct spi_device *spi)
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(max3100_pm_ops, max3100_suspend, max3100_resume);
+#define MAX3100_PM_OPS (&max3100_pm_ops)
+
 #else
-#define max3100_suspend NULL
-#define max3100_resume  NULL
+#define MAX3100_PM_OPS NULL
 #endif
 
 static struct spi_driver max3100_driver = {
 	.driver = {
 		.name		= "max3100",
 		.owner		= THIS_MODULE,
+		.pm		= MAX3100_PM_OPS,
 	},
-
 	.probe		= max3100_probe,
 	.remove		= max3100_remove,
-	.suspend	= max3100_suspend,
-	.resume		= max3100_resume,
 };
 
 module_spi_driver(max3100_driver);
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 0c2422cb04ea..8941e6418942 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -881,12 +881,14 @@ static struct uart_ops max310x_ops = {
 	.verify_port	= max310x_verify_port,
 };
 
-static int max310x_suspend(struct spi_device *spi, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+
+static int max310x_suspend(struct device *dev)
 {
 	int ret;
-	struct max310x_port *s = dev_get_drvdata(&spi->dev);
+	struct max310x_port *s = dev_get_drvdata(dev);
 
-	dev_dbg(&spi->dev, "Suspend\n");
+	dev_dbg(dev, "Suspend\n");
 
 	ret = uart_suspend_port(&s->uart, &s->port);
 
@@ -905,11 +907,11 @@ static int max310x_suspend(struct spi_device *spi, pm_message_t state)
 	return ret;
 }
 
-static int max310x_resume(struct spi_device *spi)
+static int max310x_resume(struct device *dev)
 {
-	struct max310x_port *s = dev_get_drvdata(&spi->dev);
+	struct max310x_port *s = dev_get_drvdata(dev);
 
-	dev_dbg(&spi->dev, "Resume\n");
+	dev_dbg(dev, "Resume\n");
 
 	if (s->pdata->suspend)
 		s->pdata->suspend(0);
@@ -928,6 +930,13 @@ static int max310x_resume(struct spi_device *spi)
 	return uart_resume_port(&s->uart, &s->port);
 }
 
+static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume);
+#define MAX310X_PM_OPS (&max310x_pm_ops)
+
+#else
+#define MAX310X_PM_OPS NULL
+#endif
+
 #ifdef CONFIG_GPIOLIB
 static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
@@ -1242,11 +1251,10 @@ static struct spi_driver max310x_driver = {
 	.driver = {
 		.name	= "max310x",
 		.owner	= THIS_MODULE,
+		.pm	= MAX310X_PM_OPS,
 	},
 	.probe		= max310x_probe,
 	.remove		= max310x_remove,
-	.suspend	= max310x_suspend,
-	.resume		= max310x_resume,
 	.id_table	= max310x_id_table,
 };
 module_spi_driver(max310x_driver);
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index e956377a38fe..65be0c00c4bf 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -707,8 +707,10 @@ static int __init mcf_init(void)
 	if (rc)
 		return rc;
 	rc = platform_driver_register(&mcf_platform_driver);
-	if (rc)
+	if (rc) {
+		uart_unregister_driver(&mcf_driver);
 		return rc;
+	}
 	return 0;
 }
 
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 018bad922554..f51b280f3bf2 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1497,18 +1497,23 @@ mpc52xx_uart_init(void)
 	if (psc_ops && psc_ops->fifoc_init) {
 		ret = psc_ops->fifoc_init();
 		if (ret)
-			return ret;
+			goto err_init;
 	}
 
 	ret = platform_driver_register(&mpc52xx_uart_of_driver);
 	if (ret) {
 		printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
 		       __FILE__, ret);
-		uart_unregister_driver(&mpc52xx_uart_driver);
-		return ret;
+		goto err_reg;
 	}
 
 	return 0;
+err_reg:
+	if (psc_ops && psc_ops->fifoc_uninit)
+		psc_ops->fifoc_uninit();
+err_init:
+	uart_unregister_driver(&mpc52xx_uart_driver);
+	return ret;
 }
 
 static void __exit
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index f641c232beca..9b6ef20420c0 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -743,9 +743,10 @@ static struct uart_driver serial_m3110_reg = {
 	.cons		= &serial_m3110_console,
 };
 
-#ifdef CONFIG_PM
-static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int serial_m3110_suspend(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
 	struct uart_max3110 *max = spi_get_drvdata(spi);
 
 	disable_irq(max->irq);
@@ -754,8 +755,9 @@ static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state)
 	return 0;
 }
 
-static int serial_m3110_resume(struct spi_device *spi)
+static int serial_m3110_resume(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
 	struct uart_max3110 *max = spi_get_drvdata(spi);
 
 	max3110_out(max, max->cur_conf);
@@ -763,9 +765,13 @@ static int serial_m3110_resume(struct spi_device *spi)
 	enable_irq(max->irq);
 	return 0;
 }
+
+static SIMPLE_DEV_PM_OPS(serial_m3110_pm_ops, serial_m3110_suspend,
+			serial_m3110_resume);
+#define SERIAL_M3110_PM_OPS (&serial_m3110_pm_ops)
+
 #else
-#define serial_m3110_suspend	NULL
-#define serial_m3110_resume	NULL
+#define SERIAL_M3110_PM_OPS NULL
 #endif
 
 static int serial_m3110_probe(struct spi_device *spi)
@@ -872,11 +878,10 @@ static struct spi_driver uart_max3110_driver = {
 	.driver = {
 			.name	= "spi_max3111",
 			.owner	= THIS_MODULE,
+			.pm	= SERIAL_M3110_PM_OPS,
 	},
 	.probe		= serial_m3110_probe,
 	.remove		= serial_m3110_remove,
-	.suspend	= serial_m3110_suspend,
-	.resume		= serial_m3110_resume,
 };
 
 static int __init serial_m3110_init(void)
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index 4a942c78347e..4ca2f64861e6 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -907,7 +907,6 @@ static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr,
 	unsigned int error_f = 0;
 	unsigned long flags;
 	unsigned int flush;
-	struct tty_struct *tty;
 	struct tty_port *port;
 	struct uart_port *uport;
 	struct msm_hs_port *msm_uport;
@@ -919,7 +918,6 @@ static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr,
 	clk_enable(msm_uport->clk);
 
 	port = &uport->state->port;
-	tty = port->tty;
 
 	msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE);
 
diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c
index e722ff163d91..1238ac370bff 100644
--- a/drivers/tty/serial/msm_smd_tty.c
+++ b/drivers/tty/serial/msm_smd_tty.c
@@ -90,13 +90,13 @@ static void smd_tty_notify(void *priv, unsigned event)
 
 static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty)
 {
+	struct smd_tty_info *info = container_of(tport, struct smd_tty_info,
+			port);
 	int i, res = 0;
-	int n = tty->index;
 	const char *name = NULL;
-	struct smd_tty_info *info = smd_tty + n;
 
 	for (i = 0; i < smd_tty_channels_len; i++) {
-		if (smd_tty_channels[i].id == n) {
+		if (smd_tty_channels[i].id == tty->index) {
 			name = smd_tty_channels[i].name;
 			break;
 		}
@@ -117,17 +117,13 @@ static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty)
 
 static void smd_tty_port_shutdown(struct tty_port *tport)
 {
-	struct smd_tty_info *info;
-	struct tty_struct *tty = tty_port_tty_get(tport);
+	struct smd_tty_info *info = container_of(tport, struct smd_tty_info,
+			port);
 
-	info = tty->driver_data;
 	if (info->ch) {
 		smd_close(info->ch);
 		info->ch = 0;
 	}
-
-	tty->driver_data = 0;
-	tty_kref_put(tty);
 }
 
 static int smd_tty_open(struct tty_struct *tty, struct file *f)
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index d549fe1fa42a..4f5f161896a1 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -35,7 +35,7 @@
 #include <linux/pinctrl/consumer.h>
 #include <linux/of_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/fsl/mxs-dma.h>
+#include <linux/dmaengine.h>
 
 #include <asm/cacheflush.h>
 
@@ -148,11 +148,6 @@ struct mxs_auart_port {
 	struct device *dev;
 
 	/* for DMA */
-	struct mxs_dma_data dma_data;
-	int dma_channel_rx, dma_channel_tx;
-	int dma_irq_rx, dma_irq_tx;
-	int dma_channel;
-
 	struct scatterlist tx_sgl;
 	struct dma_chan	*tx_dma_chan;
 	void *tx_dma_buf;
@@ -440,20 +435,6 @@ static u32 mxs_auart_get_mctrl(struct uart_port *u)
 	return mctrl;
 }
 
-static bool mxs_auart_dma_filter(struct dma_chan *chan, void *param)
-{
-	struct mxs_auart_port *s = param;
-
-	if (!mxs_dma_is_apbx(chan))
-		return false;
-
-	if (s->dma_channel == chan->chan_id) {
-		chan->private = &s->dma_data;
-		return true;
-	}
-	return false;
-}
-
 static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s);
 static void dma_rx_callback(void *arg)
 {
@@ -545,21 +526,11 @@ static void mxs_auart_dma_exit(struct mxs_auart_port *s)
 
 static int mxs_auart_dma_init(struct mxs_auart_port *s)
 {
-	dma_cap_mask_t mask;
-
 	if (auart_dma_enabled(s))
 		return 0;
 
-	/* We do not get the right DMA channels. */
-	if (s->dma_channel_rx == -1 || s->dma_channel_tx == -1)
-		return -EINVAL;
-
 	/* init for RX */
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	s->dma_channel = s->dma_channel_rx;
-	s->dma_data.chan_irq = s->dma_irq_rx;
-	s->rx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s);
+	s->rx_dma_chan = dma_request_slave_channel(s->dev, "rx");
 	if (!s->rx_dma_chan)
 		goto err_out;
 	s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
@@ -567,9 +538,7 @@ static int mxs_auart_dma_init(struct mxs_auart_port *s)
 		goto err_out;
 
 	/* init for TX */
-	s->dma_channel = s->dma_channel_tx;
-	s->dma_data.chan_irq = s->dma_irq_tx;
-	s->tx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s);
+	s->tx_dma_chan = dma_request_slave_channel(s->dev, "tx");
 	if (!s->tx_dma_chan)
 		goto err_out;
 	s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
@@ -883,7 +852,7 @@ auart_console_write(struct console *co, const char *str, unsigned int count)
 	unsigned int old_ctrl0, old_ctrl2;
 	unsigned int to = 1000;
 
-	if (co->index >	MXS_AUART_PORTS || co->index < 0)
+	if (co->index >= MXS_AUART_PORTS || co->index < 0)
 		return;
 
 	s = auart_port[co->index];
@@ -1020,7 +989,6 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s,
 		struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	u32 dma_channel[2];
 	int ret;
 
 	if (!np)
@@ -1034,20 +1002,8 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s,
 	}
 	s->port.line = ret;
 
-	s->dma_irq_rx = platform_get_irq(pdev, 1);
-	s->dma_irq_tx = platform_get_irq(pdev, 2);
+	s->flags |= MXS_AUART_DMA_CONFIG;
 
-	ret = of_property_read_u32_array(np, "fsl,auart-dma-channel",
-					dma_channel, 2);
-	if (ret == 0) {
-		s->dma_channel_rx = dma_channel[0];
-		s->dma_channel_tx = dma_channel[1];
-
-		s->flags |= MXS_AUART_DMA_CONFIG;
-	} else {
-		s->dma_channel_rx = -1;
-		s->dma_channel_tx = -1;
-	}
 	return 0;
 }
 
@@ -1103,7 +1059,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
 	s->port.fifosize = 16;
 	s->port.uartclk = clk_get_rate(s->clk);
 	s->port.type = PORT_IMX;
-	s->port.dev = s->dev = get_device(&pdev->dev);
+	s->port.dev = s->dev = &pdev->dev;
 
 	s->ctrl = 0;
 
@@ -1134,7 +1090,6 @@ out_free_irq:
 	auart_port[pdev->id] = NULL;
 	free_irq(s->irq, s);
 out_free_clk:
-	put_device(s->dev);
 	clk_put(s->clk);
 out_free:
 	kfree(s);
@@ -1150,7 +1105,6 @@ static int mxs_auart_remove(struct platform_device *pdev)
 
 	auart_port[pdev->id] = NULL;
 
-	put_device(s->dev);
 	clk_put(s->clk);
 	free_irq(s->irq, s);
 	kfree(s);
diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c
index 77287c54f331..549c70a2a63e 100644
--- a/drivers/tty/serial/nwpserial.c
+++ b/drivers/tty/serial/nwpserial.c
@@ -199,7 +199,7 @@ static void nwpserial_shutdown(struct uart_port *port)
 	dcr_write(up->dcr_host, UART_IER, up->ier);
 
 	/* free irq */
-	free_irq(up->port.irq, port);
+	free_irq(up->port.irq, up);
 }
 
 static int nwpserial_verify_port(struct uart_port *port,
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index b025d5438275..39c7ea4cb14f 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -14,7 +14,6 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
-#include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -22,6 +21,8 @@
 #include <linux/nwpserial.h>
 #include <linux/clk.h>
 
+#include "8250/8250.h"
+
 struct of_serial_info {
 	struct clk *clk;
 	int type;
@@ -97,6 +98,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 	if (of_property_read_u32(np, "reg-shift", &prop) == 0)
 		port->regshift = prop;
 
+	/* Check for fifo size */
+	if (of_property_read_u32(np, "fifo-size", &prop) == 0)
+		port->fifosize = prop;
+
 	port->irq = irq_of_parse_and_map(np, 0);
 	port->iotype = UPIO_MEM;
 	if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
@@ -167,11 +172,17 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 #ifdef CONFIG_SERIAL_8250
 	case PORT_8250 ... PORT_MAX_8250:
 	{
-		/* For now the of bindings don't support the extra
-		   8250 specific bits */
 		struct uart_8250_port port8250;
 		memset(&port8250, 0, sizeof(port8250));
 		port8250.port = port;
+
+		if (port.fifosize)
+			port8250.capabilities = UART_CAP_FIFO;
+
+		if (of_property_read_bool(ofdev->dev.of_node,
+					  "auto-flow-control"))
+			port8250.capabilities |= UART_CAP_AFE;
+
 		ret = serial8250_register_8250_port(&port8250);
 		break;
 	}
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 4dc41408ecb7..f0b9f6b52b32 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -202,26 +202,6 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
 	return pdata->get_context_loss_count(up->dev);
 }
 
-static void serial_omap_set_forceidle(struct uart_omap_port *up)
-{
-	struct omap_uart_port_info *pdata = up->dev->platform_data;
-
-	if (!pdata || !pdata->set_forceidle)
-		return;
-
-	pdata->set_forceidle(up->dev);
-}
-
-static void serial_omap_set_noidle(struct uart_omap_port *up)
-{
-	struct omap_uart_port_info *pdata = up->dev->platform_data;
-
-	if (!pdata || !pdata->set_noidle)
-		return;
-
-	pdata->set_noidle(up->dev);
-}
-
 static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
 {
 	struct omap_uart_port_info *pdata = up->dev->platform_data;
@@ -298,8 +278,6 @@ static void serial_omap_stop_tx(struct uart_port *port)
 		serial_out(up, UART_IER, up->ier);
 	}
 
-	serial_omap_set_forceidle(up);
-
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
 }
@@ -364,7 +342,6 @@ static void serial_omap_start_tx(struct uart_port *port)
 
 	pm_runtime_get_sync(up->dev);
 	serial_omap_enable_ier_thri(up);
-	serial_omap_set_noidle(up);
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
 }
@@ -886,6 +863,17 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
 	/* FIFO ENABLE, DMA MODE */
 
+	up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK;
+	/*
+	 * NOTE: Setting OMAP_UART_SCR_RX_TRIG_GRANU1_MASK
+	 * sets Enables the granularity of 1 for TRIGGER RX
+	 * level. Along with setting RX FIFO trigger level
+	 * to 1 (as noted below, 16 characters) and TLR[3:0]
+	 * to zero this will result RX FIFO threshold level
+	 * to 1 character, instead of 16 as noted in comment
+	 * below.
+	 */
+
 	/* Set receive FIFO threshold to 16 characters and
 	 * transmit FIFO threshold to 16 spaces
 	 */
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 7a6c989924b3..21a7e179edf3 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1493,29 +1493,6 @@ static int pch_uart_verify_port(struct uart_port *port,
 	return 0;
 }
 
-static struct uart_ops pch_uart_ops = {
-	.tx_empty = pch_uart_tx_empty,
-	.set_mctrl = pch_uart_set_mctrl,
-	.get_mctrl = pch_uart_get_mctrl,
-	.stop_tx = pch_uart_stop_tx,
-	.start_tx = pch_uart_start_tx,
-	.stop_rx = pch_uart_stop_rx,
-	.enable_ms = pch_uart_enable_ms,
-	.break_ctl = pch_uart_break_ctl,
-	.startup = pch_uart_startup,
-	.shutdown = pch_uart_shutdown,
-	.set_termios = pch_uart_set_termios,
-/*	.pm		= pch_uart_pm,		Not supported yet */
-/*	.set_wake	= pch_uart_set_wake,	Not supported yet */
-	.type = pch_uart_type,
-	.release_port = pch_uart_release_port,
-	.request_port = pch_uart_request_port,
-	.config_port = pch_uart_config_port,
-	.verify_port = pch_uart_verify_port
-};
-
-#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
-
 /*
  *	Wait for transmitter & holding register to empty
  */
@@ -1547,6 +1524,84 @@ static void wait_for_xmitr(struct eg20t_port *up, int bits)
 	}
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for communicate via uart while
+ * in an interrupt or debug context.
+ */
+static int pch_uart_get_poll_char(struct uart_port *port)
+{
+	struct eg20t_port *priv =
+		container_of(port, struct eg20t_port, port);
+	u8 lsr = ioread8(priv->membase + UART_LSR);
+
+	if (!(lsr & UART_LSR_DR))
+		return NO_POLL_CHAR;
+
+	return ioread8(priv->membase + PCH_UART_RBR);
+}
+
+
+static void pch_uart_put_poll_char(struct uart_port *port,
+			 unsigned char c)
+{
+	unsigned int ier;
+	struct eg20t_port *priv =
+		container_of(port, struct eg20t_port, port);
+
+	/*
+	 * First save the IER then disable the interrupts
+	 */
+	ier = ioread8(priv->membase + UART_IER);
+	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
+
+	wait_for_xmitr(priv, UART_LSR_THRE);
+	/*
+	 * Send the character out.
+	 * If a LF, also do CR...
+	 */
+	iowrite8(c, priv->membase + PCH_UART_THR);
+	if (c == 10) {
+		wait_for_xmitr(priv, UART_LSR_THRE);
+		iowrite8(13, priv->membase + PCH_UART_THR);
+	}
+
+	/*
+	 * Finally, wait for transmitter to become empty
+	 * and restore the IER
+	 */
+	wait_for_xmitr(priv, BOTH_EMPTY);
+	iowrite8(ier, priv->membase + UART_IER);
+}
+#endif /* CONFIG_CONSOLE_POLL */
+
+static struct uart_ops pch_uart_ops = {
+	.tx_empty = pch_uart_tx_empty,
+	.set_mctrl = pch_uart_set_mctrl,
+	.get_mctrl = pch_uart_get_mctrl,
+	.stop_tx = pch_uart_stop_tx,
+	.start_tx = pch_uart_start_tx,
+	.stop_rx = pch_uart_stop_rx,
+	.enable_ms = pch_uart_enable_ms,
+	.break_ctl = pch_uart_break_ctl,
+	.startup = pch_uart_startup,
+	.shutdown = pch_uart_shutdown,
+	.set_termios = pch_uart_set_termios,
+/*	.pm		= pch_uart_pm,		Not supported yet */
+/*	.set_wake	= pch_uart_set_wake,	Not supported yet */
+	.type = pch_uart_type,
+	.release_port = pch_uart_release_port,
+	.request_port = pch_uart_request_port,
+	.config_port = pch_uart_config_port,
+	.verify_port = pch_uart_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char = pch_uart_get_poll_char,
+	.poll_put_char = pch_uart_put_poll_char,
+#endif
+};
+
+#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
+
 static void pch_console_putchar(struct uart_port *port, int ch)
 {
 	struct eg20t_port *priv =
@@ -1655,7 +1710,7 @@ static struct console pch_console = {
 #define PCH_CONSOLE	(&pch_console)
 #else
 #define PCH_CONSOLE	NULL
-#endif
+#endif	/* CONFIG_SERIAL_PCH_UART_CONSOLE */
 
 static struct uart_driver pch_uart_driver = {
 	.owner = THIS_MODULE,
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 2769a38d15b6..0c8a9fa2be6c 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -39,6 +39,7 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/serial_s3c.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
@@ -46,10 +47,9 @@
 
 #include <asm/irq.h>
 
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
+#ifdef CONFIG_SAMSUNG_CLOCK
 #include <plat/clock.h>
+#endif
 
 #include "samsung.h"
 
@@ -446,6 +446,8 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
 
 	/* Clear pending interrupts and mask all interrupts */
 	if (s3c24xx_serial_has_interrupt_mask(port)) {
+		free_irq(port->irq, ourport);
+
 		wr_regl(port, S3C64XX_UINTP, 0xf);
 		wr_regl(port, S3C64XX_UINTM, 0xf);
 	}
@@ -505,6 +507,8 @@ static int s3c64xx_serial_startup(struct uart_port *port)
 	dbg("s3c64xx_serial_startup: port=%p (%08lx,%p)\n",
 	    port->mapbase, port->membase);
 
+	wr_regl(port, S3C64XX_UINTM, 0xf);
+
 	ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED,
 			  s3c24xx_serial_portname(port), ourport);
 	if (ret) {
@@ -894,7 +898,7 @@ console_initcall(s3c24xx_serial_console_init);
 #define S3C24XX_SERIAL_CONSOLE NULL
 #endif
 
-#ifdef CONFIG_CONSOLE_POLL
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
 static int s3c24xx_serial_get_poll_char(struct uart_port *port);
 static void s3c24xx_serial_put_poll_char(struct uart_port *port,
 			 unsigned char c);
@@ -918,7 +922,7 @@ static struct uart_ops s3c24xx_serial_ops = {
 	.request_port	= s3c24xx_serial_request_port,
 	.config_port	= s3c24xx_serial_config_port,
 	.verify_port	= s3c24xx_serial_verify_port,
-#ifdef CONFIG_CONSOLE_POLL
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
 	.poll_get_char = s3c24xx_serial_get_poll_char,
 	.poll_put_char = s3c24xx_serial_put_poll_char,
 #endif
@@ -1162,6 +1166,18 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 		ourport->tx_irq = ret;
 
 	ourport->clk	= clk_get(&platdev->dev, "uart");
+	if (IS_ERR(ourport->clk)) {
+		pr_err("%s: Controller clock not found\n",
+				dev_name(&platdev->dev));
+		return PTR_ERR(ourport->clk);
+	}
+
+	ret = clk_prepare_enable(ourport->clk);
+	if (ret) {
+		pr_err("uart: clock failed to prepare+enable: %d\n", ret);
+		clk_put(ourport->clk);
+		return ret;
+	}
 
 	/* Keep all interrupts masked and cleared */
 	if (s3c24xx_serial_has_interrupt_mask(port)) {
@@ -1176,9 +1192,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
 	/* reset the fifos (and setup the uart) */
 	s3c24xx_serial_resetport(port, cfg);
+	clk_disable_unprepare(ourport->clk);
 	return 0;
 }
 
+#ifdef CONFIG_SAMSUNG_CLOCK
 static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
 					  struct device_attribute *attr,
 					  char *buf)
@@ -1194,7 +1212,7 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
 }
 
 static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
-
+#endif
 
 /* Device driver serial port probe */
 
@@ -1252,9 +1270,11 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
 	platform_set_drvdata(pdev, &ourport->port);
 
+#ifdef CONFIG_SAMSUNG_CLOCK
 	ret = device_create_file(&pdev->dev, &dev_attr_clock_source);
 	if (ret < 0)
 		dev_err(&pdev->dev, "failed to add clock source attr.\n");
+#endif
 
 	ret = s3c24xx_serial_cpufreq_register(ourport);
 	if (ret < 0)
@@ -1272,7 +1292,9 @@ static int s3c24xx_serial_remove(struct platform_device *dev)
 
 	if (port) {
 		s3c24xx_serial_cpufreq_deregister(to_ourport(port));
+#ifdef CONFIG_SAMSUNG_CLOCK
 		device_remove_file(&dev->dev, &dev_attr_clock_source);
+#endif
 		uart_remove_one_port(&s3c24xx_uart_drv, port);
 	}
 
@@ -1307,9 +1329,29 @@ static int s3c24xx_serial_resume(struct device *dev)
 	return 0;
 }
 
+static int s3c24xx_serial_resume_noirq(struct device *dev)
+{
+	struct uart_port *port = s3c24xx_dev_to_port(dev);
+
+	if (port) {
+		/* restore IRQ mask */
+		if (s3c24xx_serial_has_interrupt_mask(port)) {
+			unsigned int uintm = 0xf;
+			if (tx_enabled(port))
+				uintm &= ~S3C64XX_UINTM_TXD_MSK;
+			if (rx_enabled(port))
+				uintm &= ~S3C64XX_UINTM_RXD_MSK;
+			wr_regl(port, S3C64XX_UINTM, uintm);
+		}
+	}
+
+	return 0;
+}
+
 static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
 	.suspend = s3c24xx_serial_suspend,
 	.resume = s3c24xx_serial_resume,
+	.resume_noirq = s3c24xx_serial_resume_noirq,
 };
 #define SERIAL_SAMSUNG_PM_OPS	(&s3c24xx_serial_pm_ops)
 
@@ -1343,6 +1385,13 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
 	return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
 }
 
+static bool
+s3c24xx_port_configured(unsigned int ucon)
+{
+	/* consider the serial port configured if the tx/rx mode set */
+	return (ucon & 0xf) != 0;
+}
+
 #ifdef CONFIG_CONSOLE_POLL
 /*
  * Console polling routines for writing and reading from the uart while
@@ -1365,6 +1414,11 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port,
 		unsigned char c)
 {
 	unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+	unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+
+	/* not possible to xmit on unconfigured port */
+	if (!s3c24xx_port_configured(ucon))
+		return;
 
 	while (!s3c24xx_serial_console_txrdy(port, ufcon))
 		cpu_relax();
@@ -1377,6 +1431,12 @@ static void
 s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
 {
 	unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+	unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+
+	/* not possible to xmit on unconfigured port */
+	if (!s3c24xx_port_configured(ucon))
+		return;
+
 	while (!s3c24xx_serial_console_txrdy(port, ufcon))
 		barrier();
 	wr_regb(cons_uart, S3C2410_UTXH, ch);
@@ -1409,9 +1469,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
 	    "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
 	    port, ulcon, ucon, ubrdiv);
 
-	if ((ucon & 0xf) != 0) {
-		/* consider the serial port configured if the tx/rx mode set */
-
+	if (s3c24xx_port_configured(ucon)) {
 		switch (ulcon & S3C2410_LCON_CSMASK) {
 		case S3C2410_LCON_CS5:
 			*bits = 5;
@@ -1758,6 +1816,7 @@ static int __init s3c24xx_serial_modinit(void)
 
 static void __exit s3c24xx_serial_modexit(void)
 {
+	platform_driver_unregister(&samsung_serial_driver);
 	uart_unregister_driver(&s3c24xx_uart_drv);
 }
 
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index 1a4bca3e4179..00a499ecd385 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -76,7 +76,9 @@ struct s3c24xx_uart_port {
 #define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
 #define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
 
-#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG
+#if defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \
+    defined(CONFIG_DEBUG_LL) && \
+    !defined(MODULE)
 
 extern void printascii(const char *);
 
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index 08dbfb88d42c..c77304155410 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -27,6 +27,7 @@
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/serial-sccnxp.h>
+#include <linux/regulator/consumer.h>
 
 #define SCCNXP_NAME			"uart-sccnxp"
 #define SCCNXP_MAJOR			204
@@ -131,6 +132,8 @@ struct sccnxp_port {
 	struct timer_list	timer;
 
 	struct sccnxp_pdata	pdata;
+
+	struct regulator	*regulator;
 };
 
 static inline u8 sccnxp_raw_read(void __iomem *base, u8 reg, u8 shift)
@@ -789,8 +792,6 @@ static int sccnxp_probe(struct platform_device *pdev)
 		return -EADDRNOTAVAIL;
 	}
 
-	dev_set_name(&pdev->dev, SCCNXP_NAME);
-
 	s = devm_kzalloc(&pdev->dev, sizeof(struct sccnxp_port), GFP_KERNEL);
 	if (!s) {
 		dev_err(&pdev->dev, "Error allocating port structure\n");
@@ -918,6 +919,16 @@ static int sccnxp_probe(struct platform_device *pdev)
 		goto err_out;
 	}
 
+	s->regulator = devm_regulator_get(&pdev->dev, "VCC");
+	if (!IS_ERR(s->regulator)) {
+		ret = regulator_enable(s->regulator);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Failed to enable regulator: %i\n", ret);
+			return ret;
+		}
+	}
+
 	membase = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(membase)) {
 		ret = PTR_ERR(membase);
@@ -967,10 +978,6 @@ static int sccnxp_probe(struct platform_device *pdev)
 	s->imr = 0;
 	sccnxp_write(&s->port[0], SCCNXP_IMR_REG, 0);
 
-	/* Board specific configure */
-	if (s->pdata.init)
-		s->pdata.init();
-
 	if (!s->poll) {
 		ret = devm_request_threaded_irq(&pdev->dev, s->irq, NULL,
 						sccnxp_ist,
@@ -1011,8 +1018,8 @@ static int sccnxp_remove(struct platform_device *pdev)
 	uart_unregister_driver(&s->uart);
 	platform_set_drvdata(pdev, NULL);
 
-	if (s->pdata.exit)
-		s->pdata.exit();
+	if (!IS_ERR(s->regulator))
+		return regulator_disable(s->regulator);
 
 	return 0;
 }
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 372de8ade76a..9799d043a9bd 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -26,6 +26,7 @@
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/module.h>
@@ -1301,11 +1302,9 @@ static int tegra_uart_probe(struct platform_device *pdev)
 	}
 
 	u->mapbase = resource->start;
-	u->membase = devm_request_and_ioremap(&pdev->dev, resource);
-	if (!u->membase) {
-		dev_err(&pdev->dev, "memregion/iomap address req failed\n");
-		return -EADDRNOTAVAIL;
-	}
+	u->membase = devm_ioremap_resource(&pdev->dev, resource);
+	if (IS_ERR(u->membase))
+		return PTR_ERR(u->membase);
 
 	tup->uart_clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(tup->uart_clk)) {
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index a400002dfa84..f87dbfd32770 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1711,7 +1711,7 @@ static int uart_proc_show(struct seq_file *m, void *v)
 
 static int uart_proc_open(struct inode *inode, struct file *file)
 {
-	return single_open(file, uart_proc_show, PDE(inode)->data);
+	return single_open(file, uart_proc_show, PDE_DATA(inode));
 }
 
 static const struct file_operations uart_proc_fops = {
@@ -1941,6 +1941,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 		mutex_unlock(&port->mutex);
 		return 0;
 	}
+	put_device(tty_dev);
+
 	if (console_suspend_enabled || !uart_console(uport))
 		uport->suspended = 1;
 
@@ -2006,9 +2008,11 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 			disable_irq_wake(uport->irq);
 			uport->irq_wake = 0;
 		}
+		put_device(tty_dev);
 		mutex_unlock(&port->mutex);
 		return 0;
 	}
+	put_device(tty_dev);
 	uport->suspended = 0;
 
 	/*
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 4c22a1529aac..5aca7364634c 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -15,8 +15,6 @@
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
     defined(CONFIG_ARCH_SH73A0) || \
-    defined(CONFIG_ARCH_SH7367) || \
-    defined(CONFIG_ARCH_SH7377) || \
     defined(CONFIG_ARCH_SH7372) || \
     defined(CONFIG_ARCH_R8A7740)
 
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 6bbfe9934a4d..03465b673945 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -758,7 +758,7 @@ static struct of_device_id sirfsoc_uart_ids[] = {
 	{ .compatible = "sirf,marco-uart", },
 	{}
 };
-MODULE_DEVICE_TABLE(of, sirfsoc_serial_of_match);
+MODULE_DEVICE_TABLE(of, sirfsoc_uart_ids);
 
 static struct platform_driver sirfsoc_uart_driver = {
 	.probe		= sirfsoc_uart_probe,
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 8de2213664e0..a422c8b55a47 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -203,7 +203,7 @@ receive_chars(struct uart_sunsab_port *up,
 				flag = TTY_FRAME;
 		}
 
-		if (uart_handle_sysrq_char(&up->port, ch))
+		if (uart_handle_sysrq_char(&up->port, ch) || !port)
 			continue;
 
 		if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 &&
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index e343d6670854..0d8465728473 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -968,6 +968,7 @@ static struct uart_ops sunsu_pops = {
 #define UART_NR	4
 
 static struct uart_sunsu_port sunsu_ports[UART_NR];
+static int nr_inst; /* Number of already registered ports */
 
 #ifdef CONFIG_SERIO
 
@@ -1337,13 +1338,8 @@ static int __init sunsu_console_setup(struct console *co, char *options)
 	printk("Console: ttyS%d (SU)\n",
 	       (sunsu_reg.minor - 64) + co->index);
 
-	/*
-	 * Check whether an invalid uart number has been specified, and
-	 * if so, search for the first available port that does have
-	 * console support.
-	 */
-	if (co->index >= UART_NR)
-		co->index = 0;
+	if (co->index > nr_inst)
+		return -ENODEV;
 	port = &sunsu_ports[co->index].port;
 
 	/*
@@ -1408,7 +1404,6 @@ static enum su_type su_get_type(struct device_node *dp)
 
 static int su_probe(struct platform_device *op)
 {
-	static int inst;
 	struct device_node *dp = op->dev.of_node;
 	struct uart_sunsu_port *up;
 	struct resource *rp;
@@ -1418,16 +1413,16 @@ static int su_probe(struct platform_device *op)
 
 	type = su_get_type(dp);
 	if (type == SU_PORT_PORT) {
-		if (inst >= UART_NR)
+		if (nr_inst >= UART_NR)
 			return -EINVAL;
-		up = &sunsu_ports[inst];
+		up = &sunsu_ports[nr_inst];
 	} else {
 		up = kzalloc(sizeof(*up), GFP_KERNEL);
 		if (!up)
 			return -ENOMEM;
 	}
 
-	up->port.line = inst;
+	up->port.line = nr_inst;
 
 	spin_lock_init(&up->port.lock);
 
@@ -1461,6 +1456,8 @@ static int su_probe(struct platform_device *op)
 		}
 		dev_set_drvdata(&op->dev, up);
 
+		nr_inst++;
+
 		return 0;
 	}
 
@@ -1488,7 +1485,7 @@ static int su_probe(struct platform_device *op)
 
 	dev_set_drvdata(&op->dev, up);
 
-	inst++;
+	nr_inst++;
 
 	return 0;
 
@@ -1595,6 +1592,7 @@ static int __init sunsu_init(void)
 
 static void __exit sunsu_exit(void)
 {
+	platform_driver_unregister(&su_driver);
 	if (sunsu_reg.nr)
 		sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr);
 }
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index 27669ff3d446..813ef8eb8eff 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -388,7 +388,7 @@ sunzilog_receive_chars(struct uart_sunzilog_port *up,
 			else if (r1 & CRC_ERR)
 				flag = TTY_FRAME;
 		}
-		if (uart_handle_sysrq_char(&up->port, ch))
+		if (uart_handle_sysrq_char(&up->port, ch) || !port)
 			continue;
 
 		if (up->port.ignore_status_mask == 0xff ||
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 705240e6c4ec..1a8bc2275ea4 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -35,6 +35,7 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
+#include <linux/err.h>
 
 /*
  * UART Register offsets
@@ -585,9 +586,9 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	if (!vt8500_port)
 		return -ENOMEM;
 
-	vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
-	if (!vt8500_port->uart.membase)
-		return -EADDRNOTAVAIL;
+	vt8500_port->uart.membase = devm_ioremap_resource(&pdev->dev, mmres);
+	if (IS_ERR(vt8500_port->uart.membase))
+		return PTR_ERR(vt8500_port->uart.membase);
 
 	vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
 	if (IS_ERR(vt8500_port->clk)) {
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index ba451c7209fc..4e5c77834c50 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -578,14 +578,13 @@ static int xuartps_startup(struct uart_port *port)
 	/* Receive Timeout register is enabled with value of 10 */
 	xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
 
+	/* Clear out any pending interrupts before enabling them */
+	xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
 
 	/* Set the Interrupt Registers with desired interrupts */
 	xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |
 		XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN |
 		XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET);
-	xuartps_writel(~(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |
-		XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN |
-		XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT), XUARTPS_IDR_OFFSET);
 
 	return retval;
 }
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 8983276aa35e..8eaf1ab8addb 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -1058,9 +1058,6 @@ static void mgsl_bh_handler(struct work_struct *work)
 		container_of(work, struct mgsl_struct, task);
 	int action;
 
-	if (!info)
-		return;
-		
 	if ( debug_level >= DEBUG_LEVEL_BH )
 		printk( "%s(%d):mgsl_bh_handler(%s) entry\n",
 			__FILE__,__LINE__,info->device_name);
@@ -3311,7 +3308,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 	port->blocked_open++;
 	
 	while (1) {
-		if (tty->termios.c_cflag & CBAUD)
+		if (C_BAUD(tty) && test_bit(ASYNCB_INITIALIZED, &port->flags))
 			tty_port_raise_dtr_rts(port);
 		
 		set_current_state(TASK_INTERRUPTIBLE);
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index aa9eece35c3b..1abf946463f6 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -3308,7 +3308,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 	port->blocked_open++;
 
 	while (1) {
-		if ((tty->termios.c_cflag & CBAUD))
+		if (C_BAUD(tty) && test_bit(ASYNCB_INITIALIZED, &port->flags))
 			tty_port_raise_dtr_rts(port);
 
 		set_current_state(TASK_INTERRUPTIBLE);
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 6d5780cf1d57..ff171384ea52 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -3329,7 +3329,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 	port->blocked_open++;
 
 	while (1) {
-		if (tty->termios.c_cflag & CBAUD)
+		if (C_BAUD(tty) && test_bit(ASYNCB_INITIALIZED, &port->flags))
 			tty_port_raise_dtr_rts(port);
 
 		set_current_state(TASK_INTERRUPTIBLE);
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 80310f7f58d3..55ba46f6207d 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -106,7 +106,7 @@ static void sysrq_handle_SAK(int key)
 }
 static struct sysrq_key_op sysrq_SAK_op = {
 	.handler	= sysrq_handle_SAK,
-	.help_msg	= "saK",
+	.help_msg	= "sak(k)",
 	.action_msg	= "SAK",
 	.enable_mask	= SYSRQ_ENABLE_KEYBOARD,
 };
@@ -122,7 +122,7 @@ static void sysrq_handle_unraw(int key)
 
 static struct sysrq_key_op sysrq_unraw_op = {
 	.handler	= sysrq_handle_unraw,
-	.help_msg	= "unRaw",
+	.help_msg	= "unraw(r)",
 	.action_msg	= "Keyboard mode set to system default",
 	.enable_mask	= SYSRQ_ENABLE_KEYBOARD,
 };
@@ -140,7 +140,7 @@ static void sysrq_handle_crash(int key)
 }
 static struct sysrq_key_op sysrq_crash_op = {
 	.handler	= sysrq_handle_crash,
-	.help_msg	= "Crash",
+	.help_msg	= "crash(c)",
 	.action_msg	= "Trigger a crash",
 	.enable_mask	= SYSRQ_ENABLE_DUMP,
 };
@@ -153,7 +153,7 @@ static void sysrq_handle_reboot(int key)
 }
 static struct sysrq_key_op sysrq_reboot_op = {
 	.handler	= sysrq_handle_reboot,
-	.help_msg	= "reBoot",
+	.help_msg	= "reboot(b)",
 	.action_msg	= "Resetting",
 	.enable_mask	= SYSRQ_ENABLE_BOOT,
 };
@@ -164,7 +164,7 @@ static void sysrq_handle_sync(int key)
 }
 static struct sysrq_key_op sysrq_sync_op = {
 	.handler	= sysrq_handle_sync,
-	.help_msg	= "Sync",
+	.help_msg	= "sync(s)",
 	.action_msg	= "Emergency Sync",
 	.enable_mask	= SYSRQ_ENABLE_SYNC,
 };
@@ -176,7 +176,7 @@ static void sysrq_handle_show_timers(int key)
 
 static struct sysrq_key_op sysrq_show_timers_op = {
 	.handler	= sysrq_handle_show_timers,
-	.help_msg	= "show-all-timers(Q)",
+	.help_msg	= "show-all-timers(q)",
 	.action_msg	= "Show clockevent devices & pending hrtimers (no others)",
 };
 
@@ -186,7 +186,7 @@ static void sysrq_handle_mountro(int key)
 }
 static struct sysrq_key_op sysrq_mountro_op = {
 	.handler	= sysrq_handle_mountro,
-	.help_msg	= "Unmount",
+	.help_msg	= "unmount(u)",
 	.action_msg	= "Emergency Remount R/O",
 	.enable_mask	= SYSRQ_ENABLE_REMOUNT,
 };
@@ -199,7 +199,7 @@ static void sysrq_handle_showlocks(int key)
 
 static struct sysrq_key_op sysrq_showlocks_op = {
 	.handler	= sysrq_handle_showlocks,
-	.help_msg	= "show-all-locks(D)",
+	.help_msg	= "show-all-locks(d)",
 	.action_msg	= "Show Locks Held",
 };
 #else
@@ -250,7 +250,7 @@ static void sysrq_handle_showallcpus(int key)
 
 static struct sysrq_key_op sysrq_showallcpus_op = {
 	.handler	= sysrq_handle_showallcpus,
-	.help_msg	= "show-backtrace-all-active-cpus(L)",
+	.help_msg	= "show-backtrace-all-active-cpus(l)",
 	.action_msg	= "Show backtrace of all active CPUs",
 	.enable_mask	= SYSRQ_ENABLE_DUMP,
 };
@@ -265,7 +265,7 @@ static void sysrq_handle_showregs(int key)
 }
 static struct sysrq_key_op sysrq_showregs_op = {
 	.handler	= sysrq_handle_showregs,
-	.help_msg	= "show-registers(P)",
+	.help_msg	= "show-registers(p)",
 	.action_msg	= "Show Regs",
 	.enable_mask	= SYSRQ_ENABLE_DUMP,
 };
@@ -276,7 +276,7 @@ static void sysrq_handle_showstate(int key)
 }
 static struct sysrq_key_op sysrq_showstate_op = {
 	.handler	= sysrq_handle_showstate,
-	.help_msg	= "show-task-states(T)",
+	.help_msg	= "show-task-states(t)",
 	.action_msg	= "Show State",
 	.enable_mask	= SYSRQ_ENABLE_DUMP,
 };
@@ -287,7 +287,7 @@ static void sysrq_handle_showstate_blocked(int key)
 }
 static struct sysrq_key_op sysrq_showstate_blocked_op = {
 	.handler	= sysrq_handle_showstate_blocked,
-	.help_msg	= "show-blocked-tasks(W)",
+	.help_msg	= "show-blocked-tasks(w)",
 	.action_msg	= "Show Blocked State",
 	.enable_mask	= SYSRQ_ENABLE_DUMP,
 };
@@ -301,7 +301,7 @@ static void sysrq_ftrace_dump(int key)
 }
 static struct sysrq_key_op sysrq_ftrace_dump_op = {
 	.handler	= sysrq_ftrace_dump,
-	.help_msg	= "dump-ftrace-buffer(Z)",
+	.help_msg	= "dump-ftrace-buffer(z)",
 	.action_msg	= "Dump ftrace buffer",
 	.enable_mask	= SYSRQ_ENABLE_DUMP,
 };
@@ -315,7 +315,7 @@ static void sysrq_handle_showmem(int key)
 }
 static struct sysrq_key_op sysrq_showmem_op = {
 	.handler	= sysrq_handle_showmem,
-	.help_msg	= "show-memory-usage(M)",
+	.help_msg	= "show-memory-usage(m)",
 	.action_msg	= "Show Memory",
 	.enable_mask	= SYSRQ_ENABLE_DUMP,
 };
@@ -346,7 +346,7 @@ static void sysrq_handle_term(int key)
 }
 static struct sysrq_key_op sysrq_term_op = {
 	.handler	= sysrq_handle_term,
-	.help_msg	= "terminate-all-tasks(E)",
+	.help_msg	= "terminate-all-tasks(e)",
 	.action_msg	= "Terminate All Tasks",
 	.enable_mask	= SYSRQ_ENABLE_SIGNAL,
 };
@@ -365,7 +365,7 @@ static void sysrq_handle_moom(int key)
 }
 static struct sysrq_key_op sysrq_moom_op = {
 	.handler	= sysrq_handle_moom,
-	.help_msg	= "memory-full-oom-kill(F)",
+	.help_msg	= "memory-full-oom-kill(f)",
 	.action_msg	= "Manual OOM execution",
 	.enable_mask	= SYSRQ_ENABLE_SIGNAL,
 };
@@ -377,7 +377,7 @@ static void sysrq_handle_thaw(int key)
 }
 static struct sysrq_key_op sysrq_thaw_op = {
 	.handler	= sysrq_handle_thaw,
-	.help_msg	= "thaw-filesystems(J)",
+	.help_msg	= "thaw-filesystems(j)",
 	.action_msg	= "Emergency Thaw of all frozen filesystems",
 	.enable_mask	= SYSRQ_ENABLE_SIGNAL,
 };
@@ -390,7 +390,7 @@ static void sysrq_handle_kill(int key)
 }
 static struct sysrq_key_op sysrq_kill_op = {
 	.handler	= sysrq_handle_kill,
-	.help_msg	= "kill-all-tasks(I)",
+	.help_msg	= "kill-all-tasks(i)",
 	.action_msg	= "Kill All Tasks",
 	.enable_mask	= SYSRQ_ENABLE_SIGNAL,
 };
@@ -401,7 +401,7 @@ static void sysrq_handle_unrt(int key)
 }
 static struct sysrq_key_op sysrq_unrt_op = {
 	.handler	= sysrq_handle_unrt,
-	.help_msg	= "nice-all-RT-tasks(N)",
+	.help_msg	= "nice-all-RT-tasks(n)",
 	.action_msg	= "Nice All RT Tasks",
 	.enable_mask	= SYSRQ_ENABLE_RTNICE,
 };
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index 6953dc82850c..a4fdce74f883 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -60,24 +60,22 @@ static void tty_audit_buf_put(struct tty_audit_buf *buf)
 		tty_audit_buf_free(buf);
 }
 
-static void tty_audit_log(const char *description, struct task_struct *tsk,
-			  kuid_t loginuid, unsigned sessionid, int major,
-			  int minor, unsigned char *data, size_t size)
+static void tty_audit_log(const char *description, int major, int minor,
+			  unsigned char *data, size_t size)
 {
 	struct audit_buffer *ab;
+	struct task_struct *tsk = current;
+	uid_t uid = from_kuid(&init_user_ns, task_uid(tsk));
+	uid_t loginuid = from_kuid(&init_user_ns, audit_get_loginuid(tsk));
+	u32 sessionid = audit_get_sessionid(tsk);
 
 	ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_TTY);
 	if (ab) {
 		char name[sizeof(tsk->comm)];
-		kuid_t uid = task_uid(tsk);
-
-		audit_log_format(ab, "%s pid=%u uid=%u auid=%u ses=%u "
-				 "major=%d minor=%d comm=", description,
-				 tsk->pid,
-				 from_kuid(&init_user_ns, uid),
-				 from_kuid(&init_user_ns, loginuid),
-				 sessionid,
-				 major, minor);
+
+		audit_log_format(ab, "%s pid=%u uid=%u auid=%u ses=%u major=%d"
+				 " minor=%d comm=", description, tsk->pid, uid,
+				 loginuid, sessionid, major, minor);
 		get_task_comm(name, tsk);
 		audit_log_untrustedstring(ab, name);
 		audit_log_format(ab, " data=");
@@ -90,11 +88,9 @@ static void tty_audit_log(const char *description, struct task_struct *tsk,
  *	tty_audit_buf_push	-	Push buffered data out
  *
  *	Generate an audit message from the contents of @buf, which is owned by
- *	@tsk with @loginuid.  @buf->mutex must be locked.
+ *	the current task.  @buf->mutex must be locked.
  */
-static void tty_audit_buf_push(struct task_struct *tsk, kuid_t loginuid,
-			       unsigned int sessionid,
-			       struct tty_audit_buf *buf)
+static void tty_audit_buf_push(struct tty_audit_buf *buf)
 {
 	if (buf->valid == 0)
 		return;
@@ -102,25 +98,11 @@ static void tty_audit_buf_push(struct task_struct *tsk, kuid_t loginuid,
 		buf->valid = 0;
 		return;
 	}
-	tty_audit_log("tty", tsk, loginuid, sessionid, buf->major, buf->minor,
-		      buf->data, buf->valid);
+	tty_audit_log("tty", buf->major, buf->minor, buf->data, buf->valid);
 	buf->valid = 0;
 }
 
 /**
- *	tty_audit_buf_push_current	-	Push buffered data out
- *
- *	Generate an audit message from the contents of @buf, which is owned by
- *	the current task.  @buf->mutex must be locked.
- */
-static void tty_audit_buf_push_current(struct tty_audit_buf *buf)
-{
-	kuid_t auid = audit_get_loginuid(current);
-	unsigned int sessionid = audit_get_sessionid(current);
-	tty_audit_buf_push(current, auid, sessionid, buf);
-}
-
-/**
  *	tty_audit_exit	-	Handle a task exit
  *
  *	Make sure all buffered data is written out and deallocate the buffer.
@@ -130,15 +112,13 @@ void tty_audit_exit(void)
 {
 	struct tty_audit_buf *buf;
 
-	spin_lock_irq(&current->sighand->siglock);
 	buf = current->signal->tty_audit_buf;
 	current->signal->tty_audit_buf = NULL;
-	spin_unlock_irq(&current->sighand->siglock);
 	if (!buf)
 		return;
 
 	mutex_lock(&buf->mutex);
-	tty_audit_buf_push_current(buf);
+	tty_audit_buf_push(buf);
 	mutex_unlock(&buf->mutex);
 
 	tty_audit_buf_put(buf);
@@ -151,9 +131,8 @@ void tty_audit_exit(void)
  */
 void tty_audit_fork(struct signal_struct *sig)
 {
-	spin_lock_irq(&current->sighand->siglock);
 	sig->audit_tty = current->signal->audit_tty;
-	spin_unlock_irq(&current->sighand->siglock);
+	sig->audit_tty_log_passwd = current->signal->audit_tty_log_passwd;
 }
 
 /**
@@ -163,20 +142,21 @@ void tty_audit_tiocsti(struct tty_struct *tty, char ch)
 {
 	struct tty_audit_buf *buf;
 	int major, minor, should_audit;
+	unsigned long flags;
 
-	spin_lock_irq(&current->sighand->siglock);
+	spin_lock_irqsave(&current->sighand->siglock, flags);
 	should_audit = current->signal->audit_tty;
 	buf = current->signal->tty_audit_buf;
 	if (buf)
 		atomic_inc(&buf->count);
-	spin_unlock_irq(&current->sighand->siglock);
+	spin_unlock_irqrestore(&current->sighand->siglock, flags);
 
 	major = tty->driver->major;
 	minor = tty->driver->minor_start + tty->index;
 	if (buf) {
 		mutex_lock(&buf->mutex);
 		if (buf->major == major && buf->minor == minor)
-			tty_audit_buf_push_current(buf);
+			tty_audit_buf_push(buf);
 		mutex_unlock(&buf->mutex);
 		tty_audit_buf_put(buf);
 	}
@@ -187,24 +167,20 @@ void tty_audit_tiocsti(struct tty_struct *tty, char ch)
 
 		auid = audit_get_loginuid(current);
 		sessionid = audit_get_sessionid(current);
-		tty_audit_log("ioctl=TIOCSTI", current, auid, sessionid, major,
-			      minor, &ch, 1);
+		tty_audit_log("ioctl=TIOCSTI", major, minor, &ch, 1);
 	}
 }
 
 /**
- * tty_audit_push_task	-	Flush task's pending audit data
- * @tsk:		task pointer
- * @loginuid:		sender login uid
- * @sessionid:		sender session id
+ * tty_audit_push_current -	Flush current's pending audit data
  *
- * Called with a ref on @tsk held. Try to lock sighand and get a
- * reference to the tty audit buffer if available.
+ * Try to lock sighand and get a reference to the tty audit buffer if available.
  * Flush the buffer or return an appropriate error code.
  */
-int tty_audit_push_task(struct task_struct *tsk, kuid_t loginuid, u32 sessionid)
+int tty_audit_push_current(void)
 {
 	struct tty_audit_buf *buf = ERR_PTR(-EPERM);
+	struct task_struct *tsk = current;
 	unsigned long flags;
 
 	if (!lock_task_sighand(tsk, &flags))
@@ -225,7 +201,7 @@ int tty_audit_push_task(struct task_struct *tsk, kuid_t loginuid, u32 sessionid)
 		return PTR_ERR(buf);
 
 	mutex_lock(&buf->mutex);
-	tty_audit_buf_push(tsk, loginuid, sessionid, buf);
+	tty_audit_buf_push(buf);
 	mutex_unlock(&buf->mutex);
 
 	tty_audit_buf_put(buf);
@@ -243,10 +219,11 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
 		unsigned icanon)
 {
 	struct tty_audit_buf *buf, *buf2;
+	unsigned long flags;
 
 	buf = NULL;
 	buf2 = NULL;
-	spin_lock_irq(&current->sighand->siglock);
+	spin_lock_irqsave(&current->sighand->siglock, flags);
 	if (likely(!current->signal->audit_tty))
 		goto out;
 	buf = current->signal->tty_audit_buf;
@@ -254,7 +231,7 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
 		atomic_inc(&buf->count);
 		goto out;
 	}
-	spin_unlock_irq(&current->sighand->siglock);
+	spin_unlock_irqrestore(&current->sighand->siglock, flags);
 
 	buf2 = tty_audit_buf_alloc(tty->driver->major,
 				   tty->driver->minor_start + tty->index,
@@ -264,7 +241,7 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
 		return NULL;
 	}
 
-	spin_lock_irq(&current->sighand->siglock);
+	spin_lock_irqsave(&current->sighand->siglock, flags);
 	if (!current->signal->audit_tty)
 		goto out;
 	buf = current->signal->tty_audit_buf;
@@ -276,7 +253,7 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
 	atomic_inc(&buf->count);
 	/* Fall through */
  out:
-	spin_unlock_irq(&current->sighand->siglock);
+	spin_unlock_irqrestore(&current->sighand->siglock, flags);
 	if (buf2)
 		tty_audit_buf_free(buf2);
 	return buf;
@@ -292,10 +269,18 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
 {
 	struct tty_audit_buf *buf;
 	int major, minor;
+	int audit_log_tty_passwd;
+	unsigned long flags;
 
 	if (unlikely(size == 0))
 		return;
 
+	spin_lock_irqsave(&current->sighand->siglock, flags);
+	audit_log_tty_passwd = current->signal->audit_tty_log_passwd;
+	spin_unlock_irqrestore(&current->sighand->siglock, flags);
+	if (!audit_log_tty_passwd && icanon && !L_ECHO(tty))
+		return;
+
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY
 	    && tty->driver->subtype == PTY_TYPE_MASTER)
 		return;
@@ -309,7 +294,7 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
 	minor = tty->driver->minor_start + tty->index;
 	if (buf->major != major || buf->minor != minor
 	    || buf->icanon != icanon) {
-		tty_audit_buf_push_current(buf);
+		tty_audit_buf_push(buf);
 		buf->major = major;
 		buf->minor = minor;
 		buf->icanon = icanon;
@@ -325,7 +310,7 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
 		data += run;
 		size -= run;
 		if (buf->valid == N_TTY_BUF_SIZE)
-			tty_audit_buf_push_current(buf);
+			tty_audit_buf_push(buf);
 	} while (size != 0);
 	mutex_unlock(&buf->mutex);
 	tty_audit_buf_put(buf);
@@ -339,16 +324,17 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
 void tty_audit_push(struct tty_struct *tty)
 {
 	struct tty_audit_buf *buf;
+	unsigned long flags;
 
-	spin_lock_irq(&current->sighand->siglock);
+	spin_lock_irqsave(&current->sighand->siglock, flags);
 	if (likely(!current->signal->audit_tty)) {
-		spin_unlock_irq(&current->sighand->siglock);
+		spin_unlock_irqrestore(&current->sighand->siglock, flags);
 		return;
 	}
 	buf = current->signal->tty_audit_buf;
 	if (buf)
 		atomic_inc(&buf->count);
-	spin_unlock_irq(&current->sighand->siglock);
+	spin_unlock_irqrestore(&current->sighand->siglock, flags);
 
 	if (buf) {
 		int major, minor;
@@ -357,7 +343,7 @@ void tty_audit_push(struct tty_struct *tty)
 		minor = tty->driver->minor_start + tty->index;
 		mutex_lock(&buf->mutex);
 		if (buf->major == major && buf->minor == minor)
-			tty_audit_buf_push_current(buf);
+			tty_audit_buf_push(buf);
 		mutex_unlock(&buf->mutex);
 		tty_audit_buf_put(buf);
 	}
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 578aa7594b11..9121c1f7aeef 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -449,11 +449,6 @@ static void flush_to_ldisc(struct work_struct *work)
 				tty_buffer_free(port, head);
 				continue;
 			}
-			/* Ldisc or user is trying to flush the buffers
-			   we are feeding to the ldisc, stop feeding the
-			   line discipline as we want to empty the queue */
-			if (test_bit(TTYP_FLUSHPENDING, &port->iflags))
-				break;
 			if (!tty->receive_room)
 				break;
 			if (count > tty->receive_room)
@@ -465,17 +460,20 @@ static void flush_to_ldisc(struct work_struct *work)
 			disc->ops->receive_buf(tty, char_buf,
 							flag_buf, count);
 			spin_lock_irqsave(&buf->lock, flags);
+			/* Ldisc or user is trying to flush the buffers.
+			   We may have a deferred request to flush the
+			   input buffer, if so pull the chain under the lock
+			   and empty the queue */
+			if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
+				__tty_buffer_flush(port);
+				clear_bit(TTYP_FLUSHPENDING, &port->iflags);
+				wake_up(&tty->read_wait);
+				break;
+			}
 		}
 		clear_bit(TTYP_FLUSHING, &port->iflags);
 	}
 
-	/* We may have a deferred request to flush the input buffer,
-	   if so pull the chain under the lock and empty the queue */
-	if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
-		__tty_buffer_flush(port);
-		clear_bit(TTYP_FLUSHPENDING, &port->iflags);
-		wake_up(&tty->read_wait);
-	}
 	spin_unlock_irqrestore(&buf->lock, flags);
 
 	tty_ldisc_deref(disc);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 05400acbc456..6464029e4860 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -533,6 +533,60 @@ void tty_wakeup(struct tty_struct *tty)
 EXPORT_SYMBOL_GPL(tty_wakeup);
 
 /**
+ *	tty_signal_session_leader	- sends SIGHUP to session leader
+ *	@tty		controlling tty
+ *	@exit_session	if non-zero, signal all foreground group processes
+ *
+ *	Send SIGHUP and SIGCONT to the session leader and its process group.
+ *	Optionally, signal all processes in the foreground process group.
+ *
+ *	Returns the number of processes in the session with this tty
+ *	as their controlling terminal. This value is used to drop
+ *	tty references for those processes.
+ */
+static int tty_signal_session_leader(struct tty_struct *tty, int exit_session)
+{
+	struct task_struct *p;
+	int refs = 0;
+	struct pid *tty_pgrp = NULL;
+
+	read_lock(&tasklist_lock);
+	if (tty->session) {
+		do_each_pid_task(tty->session, PIDTYPE_SID, p) {
+			spin_lock_irq(&p->sighand->siglock);
+			if (p->signal->tty == tty) {
+				p->signal->tty = NULL;
+				/* We defer the dereferences outside fo
+				   the tasklist lock */
+				refs++;
+			}
+			if (!p->signal->leader) {
+				spin_unlock_irq(&p->sighand->siglock);
+				continue;
+			}
+			__group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p);
+			__group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p);
+			put_pid(p->signal->tty_old_pgrp);  /* A noop */
+			spin_lock(&tty->ctrl_lock);
+			tty_pgrp = get_pid(tty->pgrp);
+			if (tty->pgrp)
+				p->signal->tty_old_pgrp = get_pid(tty->pgrp);
+			spin_unlock(&tty->ctrl_lock);
+			spin_unlock_irq(&p->sighand->siglock);
+		} while_each_pid_task(tty->session, PIDTYPE_SID, p);
+	}
+	read_unlock(&tasklist_lock);
+
+	if (tty_pgrp) {
+		if (exit_session)
+			kill_pgrp(tty_pgrp, SIGHUP, exit_session);
+		put_pid(tty_pgrp);
+	}
+
+	return refs;
+}
+
+/**
  *	__tty_hangup		-	actual handler for hangup events
  *	@work: tty device
  *
@@ -554,15 +608,13 @@ EXPORT_SYMBOL_GPL(tty_wakeup);
  *		  tasklist_lock to walk task list for hangup event
  *		    ->siglock to protect ->signal/->sighand
  */
-static void __tty_hangup(struct tty_struct *tty)
+static void __tty_hangup(struct tty_struct *tty, int exit_session)
 {
 	struct file *cons_filp = NULL;
 	struct file *filp, *f = NULL;
-	struct task_struct *p;
 	struct tty_file_private *priv;
 	int    closecount = 0, n;
-	unsigned long flags;
-	int refs = 0;
+	int refs;
 
 	if (!tty)
 		return;
@@ -599,39 +651,18 @@ static void __tty_hangup(struct tty_struct *tty)
 	}
 	spin_unlock(&tty_files_lock);
 
+	refs = tty_signal_session_leader(tty, exit_session);
+	/* Account for the p->signal references we killed */
+	while (refs--)
+		tty_kref_put(tty);
+
 	/*
 	 * it drops BTM and thus races with reopen
 	 * we protect the race by TTY_HUPPING
 	 */
 	tty_ldisc_hangup(tty);
 
-	read_lock(&tasklist_lock);
-	if (tty->session) {
-		do_each_pid_task(tty->session, PIDTYPE_SID, p) {
-			spin_lock_irq(&p->sighand->siglock);
-			if (p->signal->tty == tty) {
-				p->signal->tty = NULL;
-				/* We defer the dereferences outside fo
-				   the tasklist lock */
-				refs++;
-			}
-			if (!p->signal->leader) {
-				spin_unlock_irq(&p->sighand->siglock);
-				continue;
-			}
-			__group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p);
-			__group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p);
-			put_pid(p->signal->tty_old_pgrp);  /* A noop */
-			spin_lock_irqsave(&tty->ctrl_lock, flags);
-			if (tty->pgrp)
-				p->signal->tty_old_pgrp = get_pid(tty->pgrp);
-			spin_unlock_irqrestore(&tty->ctrl_lock, flags);
-			spin_unlock_irq(&p->sighand->siglock);
-		} while_each_pid_task(tty->session, PIDTYPE_SID, p);
-	}
-	read_unlock(&tasklist_lock);
-
-	spin_lock_irqsave(&tty->ctrl_lock, flags);
+	spin_lock_irq(&tty->ctrl_lock);
 	clear_bit(TTY_THROTTLED, &tty->flags);
 	clear_bit(TTY_PUSH, &tty->flags);
 	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
@@ -640,11 +671,7 @@ static void __tty_hangup(struct tty_struct *tty)
 	tty->session = NULL;
 	tty->pgrp = NULL;
 	tty->ctrl_status = 0;
-	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
-
-	/* Account for the p->signal references we killed */
-	while (refs--)
-		tty_kref_put(tty);
+	spin_unlock_irq(&tty->ctrl_lock);
 
 	/*
 	 * If one of the devices matches a console pointer, we
@@ -666,7 +693,6 @@ static void __tty_hangup(struct tty_struct *tty)
 	 */
 	set_bit(TTY_HUPPED, &tty->flags);
 	clear_bit(TTY_HUPPING, &tty->flags);
-	tty_ldisc_enable(tty);
 
 	tty_unlock(tty);
 
@@ -679,7 +705,7 @@ static void do_tty_hangup(struct work_struct *work)
 	struct tty_struct *tty =
 		container_of(work, struct tty_struct, hangup_work);
 
-	__tty_hangup(tty);
+	__tty_hangup(tty, 0);
 }
 
 /**
@@ -717,7 +743,7 @@ void tty_vhangup(struct tty_struct *tty)
 
 	printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf));
 #endif
-	__tty_hangup(tty);
+	__tty_hangup(tty, 0);
 }
 
 EXPORT_SYMBOL(tty_vhangup);
@@ -741,6 +767,27 @@ void tty_vhangup_self(void)
 }
 
 /**
+ *	tty_vhangup_session		-	hangup session leader exit
+ *	@tty: tty to hangup
+ *
+ *	The session leader is exiting and hanging up its controlling terminal.
+ *	Every process in the foreground process group is signalled SIGHUP.
+ *
+ *	We do this synchronously so that when the syscall returns the process
+ *	is complete. That guarantee is necessary for security reasons.
+ */
+
+static void tty_vhangup_session(struct tty_struct *tty)
+{
+#ifdef TTY_DEBUG_HANGUP
+	char	buf[64];
+
+	printk(KERN_DEBUG "%s vhangup session...\n", tty_name(tty, buf));
+#endif
+	__tty_hangup(tty, 1);
+}
+
+/**
  *	tty_hung_up_p		-	was tty hung up
  *	@filp: file pointer of tty
  *
@@ -797,18 +844,18 @@ void disassociate_ctty(int on_exit)
 
 	tty = get_current_tty();
 	if (tty) {
-		struct pid *tty_pgrp = get_pid(tty->pgrp);
-		if (on_exit) {
-			if (tty->driver->type != TTY_DRIVER_TYPE_PTY)
-				tty_vhangup(tty);
-		}
-		tty_kref_put(tty);
-		if (tty_pgrp) {
-			kill_pgrp(tty_pgrp, SIGHUP, on_exit);
-			if (!on_exit)
+		if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) {
+			tty_vhangup_session(tty);
+		} else {
+			struct pid *tty_pgrp = tty_get_pgrp(tty);
+			if (tty_pgrp) {
+				kill_pgrp(tty_pgrp, SIGHUP, on_exit);
 				kill_pgrp(tty_pgrp, SIGCONT, on_exit);
-			put_pid(tty_pgrp);
+				put_pid(tty_pgrp);
+			}
 		}
+		tty_kref_put(tty);
+
 	} else if (on_exit) {
 		struct pid *old_pgrp;
 		spin_lock_irq(&current->sighand->siglock);
@@ -941,6 +988,14 @@ void start_tty(struct tty_struct *tty)
 
 EXPORT_SYMBOL(start_tty);
 
+/* We limit tty time update visibility to every 8 seconds or so. */
+static void tty_update_time(struct timespec *time)
+{
+	unsigned long sec = get_seconds() & ~7;
+	if ((long)(sec - time->tv_sec) > 0)
+		time->tv_sec = sec;
+}
+
 /**
  *	tty_read	-	read method for tty device files
  *	@file: pointer to tty file
@@ -960,10 +1015,11 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
 			loff_t *ppos)
 {
 	int i;
+	struct inode *inode = file_inode(file);
 	struct tty_struct *tty = file_tty(file);
 	struct tty_ldisc *ld;
 
-	if (tty_paranoia_check(tty, file_inode(file), "tty_read"))
+	if (tty_paranoia_check(tty, inode, "tty_read"))
 		return -EIO;
 	if (!tty || (test_bit(TTY_IO_ERROR, &tty->flags)))
 		return -EIO;
@@ -977,6 +1033,9 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
 		i = -EIO;
 	tty_ldisc_deref(ld);
 
+	if (i > 0)
+		tty_update_time(&inode->i_atime);
+
 	return i;
 }
 
@@ -1077,8 +1136,10 @@ static inline ssize_t do_tty_write(
 			break;
 		cond_resched();
 	}
-	if (written)
+	if (written) {
+		tty_update_time(&file_inode(file)->i_mtime);
 		ret = written;
+	}
 out:
 	tty_write_unlock(tty);
 	return ret;
@@ -1344,9 +1405,7 @@ static int tty_reopen(struct tty_struct *tty)
 	}
 	tty->count++;
 
-	mutex_lock(&tty->ldisc_mutex);
 	WARN_ON(!test_bit(TTY_LDISC, &tty->flags));
-	mutex_unlock(&tty->ldisc_mutex);
 
 	return 0;
 }
@@ -1463,6 +1522,17 @@ void tty_free_termios(struct tty_struct *tty)
 }
 EXPORT_SYMBOL(tty_free_termios);
 
+/**
+ *	tty_flush_works		-	flush all works of a tty
+ *	@tty: tty device to flush works for
+ *
+ *	Sync flush all works belonging to @tty.
+ */
+static void tty_flush_works(struct tty_struct *tty)
+{
+	flush_work(&tty->SAK_work);
+	flush_work(&tty->hangup_work);
+}
 
 /**
  *	release_one_tty		-	release tty structure memory
@@ -1548,6 +1618,7 @@ static void release_tty(struct tty_struct *tty, int idx)
 	tty_free_termios(tty);
 	tty_driver_remove_tty(tty->driver, tty);
 	tty->port->itty = NULL;
+	cancel_work_sync(&tty->port->buf.work);
 
 	if (tty->link)
 		tty_kref_put(tty->link);
@@ -1777,12 +1848,21 @@ int tty_release(struct inode *inode, struct file *filp)
 		return 0;
 
 #ifdef TTY_DEBUG_HANGUP
-	printk(KERN_DEBUG "%s: freeing tty structure...\n", __func__);
+	printk(KERN_DEBUG "%s: %s: final close\n", __func__, tty_name(tty, buf));
 #endif
 	/*
 	 * Ask the line discipline code to release its structures
 	 */
 	tty_ldisc_release(tty, o_tty);
+
+	/* Wait for pending work before tty destruction commmences */
+	tty_flush_works(tty);
+	if (o_tty)
+		tty_flush_works(o_tty);
+
+#ifdef TTY_DEBUG_HANGUP
+	printk(KERN_DEBUG "%s: %s: freeing structure...\n", __func__, tty_name(tty, buf));
+#endif
 	/*
 	 * The release_tty function takes care of the details of clearing
 	 * the slots and preserving the termios structure. The tty_unlock_pair
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index d58b92cc187c..3500d4114147 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -106,6 +106,7 @@ void tty_throttle(struct tty_struct *tty)
 	if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) &&
 	    tty->ops->throttle)
 		tty->ops->throttle(tty);
+	tty->flow_change = 0;
 	mutex_unlock(&tty->termios_mutex);
 }
 EXPORT_SYMBOL(tty_throttle);
@@ -129,11 +130,74 @@ void tty_unthrottle(struct tty_struct *tty)
 	if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
 	    tty->ops->unthrottle)
 		tty->ops->unthrottle(tty);
+	tty->flow_change = 0;
 	mutex_unlock(&tty->termios_mutex);
 }
 EXPORT_SYMBOL(tty_unthrottle);
 
 /**
+ *	tty_throttle_safe	-	flow control
+ *	@tty: terminal
+ *
+ *	Similar to tty_throttle() but will only attempt throttle
+ *	if tty->flow_change is TTY_THROTTLE_SAFE. Prevents an accidental
+ *	throttle due to race conditions when throttling is conditional
+ *	on factors evaluated prior to throttling.
+ *
+ *	Returns 0 if tty is throttled (or was already throttled)
+ */
+
+int tty_throttle_safe(struct tty_struct *tty)
+{
+	int ret = 0;
+
+	mutex_lock(&tty->termios_mutex);
+	if (!test_bit(TTY_THROTTLED, &tty->flags)) {
+		if (tty->flow_change != TTY_THROTTLE_SAFE)
+			ret = 1;
+		else {
+			set_bit(TTY_THROTTLED, &tty->flags);
+			if (tty->ops->throttle)
+				tty->ops->throttle(tty);
+		}
+	}
+	mutex_unlock(&tty->termios_mutex);
+
+	return ret;
+}
+
+/**
+ *	tty_unthrottle_safe	-	flow control
+ *	@tty: terminal
+ *
+ *	Similar to tty_unthrottle() but will only attempt unthrottle
+ *	if tty->flow_change is TTY_UNTHROTTLE_SAFE. Prevents an accidental
+ *	unthrottle due to race conditions when unthrottling is conditional
+ *	on factors evaluated prior to unthrottling.
+ *
+ *	Returns 0 if tty is unthrottled (or was already unthrottled)
+ */
+
+int tty_unthrottle_safe(struct tty_struct *tty)
+{
+	int ret = 0;
+
+	mutex_lock(&tty->termios_mutex);
+	if (test_bit(TTY_THROTTLED, &tty->flags)) {
+		if (tty->flow_change != TTY_UNTHROTTLE_SAFE)
+			ret = 1;
+		else {
+			clear_bit(TTY_THROTTLED, &tty->flags);
+			if (tty->ops->unthrottle)
+				tty->ops->unthrottle(tty);
+		}
+	}
+	mutex_unlock(&tty->termios_mutex);
+
+	return ret;
+}
+
+/**
  *	tty_wait_until_sent	-	wait for I/O to finish
  *	@tty: tty we are waiting for
  *	@timeout: how long we will wait
@@ -415,34 +479,6 @@ void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
 EXPORT_SYMBOL_GPL(tty_encode_baud_rate);
 
 /**
- *	tty_get_baud_rate	-	get tty bit rates
- *	@tty: tty to query
- *
- *	Returns the baud rate as an integer for this terminal. The
- *	termios lock must be held by the caller and the terminal bit
- *	flags may be updated.
- *
- *	Locking: none
- */
-
-speed_t tty_get_baud_rate(struct tty_struct *tty)
-{
-	speed_t baud = tty_termios_baud_rate(&tty->termios);
-
-	if (baud == 38400 && tty->alt_speed) {
-		if (!tty->warned) {
-			printk(KERN_WARNING "Use of setserial/setrocket to "
-					    "set SPD_* flags is deprecated\n");
-			tty->warned = 1;
-		}
-		baud = tty->alt_speed;
-	}
-
-	return baud;
-}
-EXPORT_SYMBOL(tty_get_baud_rate);
-
-/**
  *	tty_termios_copy_hw	-	copy hardware settings
  *	@new: New termios
  *	@old: Old termios
@@ -1086,14 +1122,12 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 }
 EXPORT_SYMBOL_GPL(tty_mode_ioctl);
 
-int tty_perform_flush(struct tty_struct *tty, unsigned long arg)
+
+/* Caller guarantees ldisc reference is held */
+static int __tty_perform_flush(struct tty_struct *tty, unsigned long arg)
 {
-	struct tty_ldisc *ld;
-	int retval = tty_check_change(tty);
-	if (retval)
-		return retval;
+	struct tty_ldisc *ld = tty->ldisc;
 
-	ld = tty_ldisc_ref_wait(tty);
 	switch (arg) {
 	case TCIFLUSH:
 		if (ld && ld->ops->flush_buffer) {
@@ -1111,12 +1145,24 @@ int tty_perform_flush(struct tty_struct *tty, unsigned long arg)
 		tty_driver_flush_buffer(tty);
 		break;
 	default:
-		tty_ldisc_deref(ld);
 		return -EINVAL;
 	}
-	tty_ldisc_deref(ld);
 	return 0;
 }
+
+int tty_perform_flush(struct tty_struct *tty, unsigned long arg)
+{
+	struct tty_ldisc *ld;
+	int retval = tty_check_change(tty);
+	if (retval)
+		return retval;
+
+	ld = tty_ldisc_ref_wait(tty);
+	retval = __tty_perform_flush(tty, arg);
+	if (ld)
+		tty_ldisc_deref(ld);
+	return retval;
+}
 EXPORT_SYMBOL_GPL(tty_perform_flush);
 
 int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
@@ -1155,7 +1201,7 @@ int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
 		}
 		return 0;
 	case TCFLSH:
-		return tty_perform_flush(tty, arg);
+		return __tty_perform_flush(tty, arg);
 	default:
 		/* Try the mode commands */
 		return tty_mode_ioctl(tty, file, cmd, arg);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index d794087c327e..1afe192bef6a 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -20,6 +20,17 @@
 #include <linux/uaccess.h>
 #include <linux/ratelimit.h>
 
+#undef LDISC_DEBUG_HANGUP
+
+#ifdef LDISC_DEBUG_HANGUP
+#define tty_ldisc_debug(tty, f, args...) ({				       \
+	char __b[64];							       \
+	printk(KERN_DEBUG "%s: %s: " f, __func__, tty_name(tty, __b), ##args); \
+})
+#else
+#define tty_ldisc_debug(tty, f, args...)
+#endif
+
 /*
  *	This guards the refcounted line discipline lists. The lock
  *	must be taken with irqs off because there are hangup path
@@ -31,44 +42,6 @@ static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
 /* Line disc dispatch table */
 static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
 
-static inline struct tty_ldisc *get_ldisc(struct tty_ldisc *ld)
-{
-	if (ld)
-		atomic_inc(&ld->users);
-	return ld;
-}
-
-static void put_ldisc(struct tty_ldisc *ld)
-{
-	unsigned long flags;
-
-	if (WARN_ON_ONCE(!ld))
-		return;
-
-	/*
-	 * If this is the last user, free the ldisc, and
-	 * release the ldisc ops.
-	 *
-	 * We really want an "atomic_dec_and_raw_lock_irqsave()",
-	 * but we don't have it, so this does it by hand.
-	 */
-	raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
-	if (atomic_dec_and_test(&ld->users)) {
-		struct tty_ldisc_ops *ldo = ld->ops;
-
-		ldo->refcount--;
-		module_put(ldo->owner);
-		raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-
-		kfree(ld);
-		return;
-	}
-	raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-
-	if (waitqueue_active(&ld->wq_idle))
-		wake_up(&ld->wq_idle);
-}
-
 /**
  *	tty_register_ldisc	-	install a line discipline
  *	@disc: ldisc number
@@ -206,6 +179,29 @@ static struct tty_ldisc *tty_ldisc_get(int disc)
 	return ld;
 }
 
+/**
+ *	tty_ldisc_put		-	release the ldisc
+ *
+ *	Complement of tty_ldisc_get().
+ */
+static inline void tty_ldisc_put(struct tty_ldisc *ld)
+{
+	unsigned long flags;
+
+	if (WARN_ON_ONCE(!ld))
+		return;
+
+	raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+
+	/* unreleased reader reference(s) will cause this WARN */
+	WARN_ON(!atomic_dec_and_test(&ld->users));
+
+	ld->ops->refcount--;
+	module_put(ld->ops->owner);
+	kfree(ld);
+	raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+}
+
 static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
 {
 	return (*pos < NR_LDISCS) ? pos : NULL;
@@ -255,24 +251,6 @@ const struct file_operations tty_ldiscs_proc_fops = {
 };
 
 /**
- *	tty_ldisc_assign	-	set ldisc on a tty
- *	@tty: tty to assign
- *	@ld: line discipline
- *
- *	Install an instance of a line discipline into a tty structure. The
- *	ldisc must have a reference count above zero to ensure it remains.
- *	The tty instance refcount starts at zero.
- *
- *	Locking:
- *		Caller must hold references
- */
-
-static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
-{
-	tty->ldisc = ld;
-}
-
-/**
  *	tty_ldisc_try		-	internal helper
  *	@tty: the tty
  *
@@ -289,10 +267,13 @@ static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
 	unsigned long flags;
 	struct tty_ldisc *ld;
 
+	/* FIXME: this allows reference acquire after TTY_LDISC is cleared */
 	raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
 	ld = NULL;
-	if (test_bit(TTY_LDISC, &tty->flags))
-		ld = get_ldisc(tty->ldisc);
+	if (test_bit(TTY_LDISC, &tty->flags) && tty->ldisc) {
+		ld = tty->ldisc;
+		atomic_inc(&ld->users);
+	}
 	raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
 	return ld;
 }
@@ -352,14 +333,23 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref);
 
 void tty_ldisc_deref(struct tty_ldisc *ld)
 {
-	put_ldisc(ld);
-}
-EXPORT_SYMBOL_GPL(tty_ldisc_deref);
+	unsigned long flags;
 
-static inline void tty_ldisc_put(struct tty_ldisc *ld)
-{
-	put_ldisc(ld);
+	if (WARN_ON_ONCE(!ld))
+		return;
+
+	raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+	/*
+	 * WARNs if one-too-many reader references were released
+	 * - the last reference must be released with tty_ldisc_put
+	 */
+	WARN_ON(atomic_dec_and_test(&ld->users));
+	raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+
+	if (waitqueue_active(&ld->wq_idle))
+		wake_up(&ld->wq_idle);
 }
+EXPORT_SYMBOL_GPL(tty_ldisc_deref);
 
 /**
  *	tty_ldisc_enable	-	allow ldisc use
@@ -373,8 +363,9 @@ static inline void tty_ldisc_put(struct tty_ldisc *ld)
  *	Clearing directly is allowed.
  */
 
-void tty_ldisc_enable(struct tty_struct *tty)
+static void tty_ldisc_enable(struct tty_struct *tty)
 {
+	clear_bit(TTY_LDISC_HALTED, &tty->flags);
 	set_bit(TTY_LDISC, &tty->flags);
 	clear_bit(TTY_LDISC_CHANGING, &tty->flags);
 	wake_up(&tty_ldisc_wait);
@@ -479,7 +470,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 	/* There is an outstanding reference here so this is safe */
 	old = tty_ldisc_get(old->ops->num);
 	WARN_ON(IS_ERR(old));
-	tty_ldisc_assign(tty, old);
+	tty->ldisc = old;
 	tty_set_termios_ldisc(tty, old->ops->num);
 	if (tty_ldisc_open(tty, old) < 0) {
 		tty_ldisc_put(old);
@@ -487,7 +478,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 		new_ldisc = tty_ldisc_get(N_TTY);
 		if (IS_ERR(new_ldisc))
 			panic("n_tty: get");
-		tty_ldisc_assign(tty, new_ldisc);
+		tty->ldisc = new_ldisc;
 		tty_set_termios_ldisc(tty, N_TTY);
 		r = tty_ldisc_open(tty, new_ldisc);
 		if (r < 0)
@@ -498,52 +489,98 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 }
 
 /**
+ *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
+ *	@tty: tty to wait for
+ *	@timeout: for how long to wait at most
+ *
+ *	Wait for the line discipline to become idle. The discipline must
+ *	have been halted for this to guarantee it remains idle.
+ */
+static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
+{
+	long ret;
+	ret = wait_event_timeout(tty->ldisc->wq_idle,
+			atomic_read(&tty->ldisc->users) == 1, timeout);
+	return ret > 0 ? 0 : -EBUSY;
+}
+
+/**
  *	tty_ldisc_halt		-	shut down the line discipline
  *	@tty: tty device
+ *	@o_tty: paired pty device (can be NULL)
+ *	@timeout: # of jiffies to wait for ldisc refs to be released
  *
- *	Shut down the line discipline and work queue for this tty device.
- *	The TTY_LDISC flag being cleared ensures no further references can
- *	be obtained while the delayed work queue halt ensures that no more
- *	data is fed to the ldisc.
+ *	Shut down the line discipline and work queue for this tty device and
+ *	its paired pty (if exists). Clearing the TTY_LDISC flag ensures
+ *	no further references can be obtained, while waiting for existing
+ *	references to be released ensures no more data is fed to the ldisc.
  *
  *	You need to do a 'flush_scheduled_work()' (outside the ldisc_mutex)
  *	in order to make sure any currently executing ldisc work is also
  *	flushed.
  */
 
-static int tty_ldisc_halt(struct tty_struct *tty)
+static int tty_ldisc_halt(struct tty_struct *tty, struct tty_struct *o_tty,
+			  long timeout)
 {
+	int retval;
+
 	clear_bit(TTY_LDISC, &tty->flags);
-	return cancel_work_sync(&tty->port->buf.work);
-}
+	if (o_tty)
+		clear_bit(TTY_LDISC, &o_tty->flags);
 
-/**
- *	tty_ldisc_flush_works	-	flush all works of a tty
- *	@tty: tty device to flush works for
- *
- *	Sync flush all works belonging to @tty.
- */
-static void tty_ldisc_flush_works(struct tty_struct *tty)
-{
-	flush_work(&tty->hangup_work);
-	flush_work(&tty->SAK_work);
-	flush_work(&tty->port->buf.work);
+	retval = tty_ldisc_wait_idle(tty, timeout);
+	if (!retval && o_tty)
+		retval = tty_ldisc_wait_idle(o_tty, timeout);
+	if (retval)
+		return retval;
+
+	set_bit(TTY_LDISC_HALTED, &tty->flags);
+	if (o_tty)
+		set_bit(TTY_LDISC_HALTED, &o_tty->flags);
+
+	return 0;
 }
 
 /**
- *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
- *	@tty: tty to wait for
- *	@timeout: for how long to wait at most
+ *	tty_ldisc_hangup_halt - halt the line discipline for hangup
+ *	@tty: tty being hung up
  *
- *	Wait for the line discipline to become idle. The discipline must
- *	have been halted for this to guarantee it remains idle.
+ *	Shut down the line discipline and work queue for the tty device
+ *	being hungup. Clear the TTY_LDISC flag to ensure no further
+ *	references can be obtained and wait for remaining references to be
+ *	released to ensure no more data is fed to this ldisc.
+ *	Caller must hold legacy and ->ldisc_mutex.
+ *
+ *	NB: tty_set_ldisc() is prevented from changing the ldisc concurrently
+ *	with this function by checking the TTY_HUPPING flag.
  */
-static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
+static bool tty_ldisc_hangup_halt(struct tty_struct *tty)
 {
-	long ret;
-	ret = wait_event_timeout(tty->ldisc->wq_idle,
-			atomic_read(&tty->ldisc->users) == 1, timeout);
-	return ret > 0 ? 0 : -EBUSY;
+	char cur_n[TASK_COMM_LEN], tty_n[64];
+	long timeout = 3 * HZ;
+
+	clear_bit(TTY_LDISC, &tty->flags);
+
+	if (tty->ldisc) {	/* Not yet closed */
+		tty_unlock(tty);
+
+		while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
+			timeout = MAX_SCHEDULE_TIMEOUT;
+			printk_ratelimited(KERN_WARNING
+				"%s: waiting (%s) for %s took too long, but we keep waiting...\n",
+				__func__, get_task_comm(cur_n, current),
+				tty_name(tty, tty_n));
+		}
+
+		set_bit(TTY_LDISC_HALTED, &tty->flags);
+
+		/* must reacquire both locks and preserve lock order */
+		mutex_unlock(&tty->ldisc_mutex);
+		tty_lock(tty);
+		mutex_lock(&tty->ldisc_mutex);
+	}
+	return !!tty->ldisc;
 }
 
 /**
@@ -563,7 +600,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 {
 	int retval;
 	struct tty_ldisc *o_ldisc, *new_ldisc;
-	int work, o_work = 0;
 	struct tty_struct *o_tty;
 
 	new_ldisc = tty_ldisc_get(ldisc);
@@ -589,15 +625,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 		return 0;
 	}
 
-	tty_unlock(tty);
-	/*
-	 *	Problem: What do we do if this blocks ?
-	 *	We could deadlock here
-	 */
-
-	tty_wait_until_sent(tty, 0);
-
-	tty_lock(tty);
 	mutex_lock(&tty->ldisc_mutex);
 
 	/*
@@ -637,20 +664,16 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 	 *	parallel to the change and re-referencing the tty.
 	 */
 
-	work = tty_ldisc_halt(tty);
-	if (o_tty)
-		o_work = tty_ldisc_halt(o_tty);
+	retval = tty_ldisc_halt(tty, o_tty, 5 * HZ);
 
 	/*
-	 * Wait for ->hangup_work and ->buf.work handlers to terminate.
+	 * Wait for hangup to complete, if pending.
 	 * We must drop the mutex here in case a hangup is also in process.
 	 */
 
 	mutex_unlock(&tty->ldisc_mutex);
 
-	tty_ldisc_flush_works(tty);
-
-	retval = tty_ldisc_wait_idle(tty, 5 * HZ);
+	flush_work(&tty->hangup_work);
 
 	tty_lock(tty);
 	mutex_lock(&tty->ldisc_mutex);
@@ -675,7 +698,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 	tty_ldisc_close(tty, o_ldisc);
 
 	/* Now set up the new line discipline. */
-	tty_ldisc_assign(tty, new_ldisc);
+	tty->ldisc = new_ldisc;
 	tty_set_termios_ldisc(tty, ldisc);
 
 	retval = tty_ldisc_open(tty, new_ldisc);
@@ -705,10 +728,10 @@ enable:
 
 	/* Restart the work queue in case no characters kick it off. Safe if
 	   already running */
-	if (work)
-		schedule_work(&tty->port->buf.work);
-	if (o_work)
+	schedule_work(&tty->port->buf.work);
+	if (o_tty)
 		schedule_work(&o_tty->port->buf.work);
+
 	mutex_unlock(&tty->ldisc_mutex);
 	tty_unlock(tty);
 	return retval;
@@ -749,11 +772,10 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
 
 	tty_ldisc_close(tty, tty->ldisc);
 	tty_ldisc_put(tty->ldisc);
-	tty->ldisc = NULL;
 	/*
 	 *	Switch the line discipline back
 	 */
-	tty_ldisc_assign(tty, ld);
+	tty->ldisc = ld;
 	tty_set_termios_ldisc(tty, ldisc);
 
 	return 0;
@@ -780,6 +802,8 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	int reset = tty->driver->flags & TTY_DRIVER_RESET_TERMIOS;
 	int err = 0;
 
+	tty_ldisc_debug(tty, "closing ldisc: %p\n", tty->ldisc);
+
 	/*
 	 * FIXME! What are the locking issues here? This may me overdoing
 	 * things... This question is especially important now that we've
@@ -812,40 +836,12 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	 */
 	mutex_lock(&tty->ldisc_mutex);
 
-	/*
-	 * this is like tty_ldisc_halt, but we need to give up
-	 * the BTM before calling cancel_work_sync, which may
-	 * need to wait for another function taking the BTM
-	 */
-	clear_bit(TTY_LDISC, &tty->flags);
-	tty_unlock(tty);
-	cancel_work_sync(&tty->port->buf.work);
-	mutex_unlock(&tty->ldisc_mutex);
-retry:
-	tty_lock(tty);
-	mutex_lock(&tty->ldisc_mutex);
-
-	/* At this point we have a closed ldisc and we want to
-	   reopen it. We could defer this to the next open but
-	   it means auditing a lot of other paths so this is
-	   a FIXME */
-	if (tty->ldisc) {	/* Not yet closed */
-		if (atomic_read(&tty->ldisc->users) != 1) {
-			char cur_n[TASK_COMM_LEN], tty_n[64];
-			long timeout = 3 * HZ;
-			tty_unlock(tty);
-
-			while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
-				timeout = MAX_SCHEDULE_TIMEOUT;
-				printk_ratelimited(KERN_WARNING
-					"%s: waiting (%s) for %s took too long, but we keep waiting...\n",
-					__func__, get_task_comm(cur_n, current),
-					tty_name(tty, tty_n));
-			}
-			mutex_unlock(&tty->ldisc_mutex);
-			goto retry;
-		}
+	if (tty_ldisc_hangup_halt(tty)) {
 
+		/* At this point we have a halted ldisc; we want to close it and
+		   reopen a new ldisc. We could defer the reopen to the next
+		   open but it means auditing a lot of other paths so this is
+		   a FIXME */
 		if (reset == 0) {
 
 			if (!tty_ldisc_reinit(tty, tty->termios.c_line))
@@ -864,6 +860,8 @@ retry:
 	mutex_unlock(&tty->ldisc_mutex);
 	if (reset)
 		tty_reset_termios(tty);
+
+	tty_ldisc_debug(tty, "re-opened ldisc: %p\n", tty->ldisc);
 }
 
 /**
@@ -899,11 +897,6 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
 
 static void tty_ldisc_kill(struct tty_struct *tty)
 {
-	/* There cannot be users from userspace now. But there still might be
-	 * drivers holding a reference via tty_ldisc_ref. Do not steal them the
-	 * ldisc until they are done. */
-	tty_ldisc_wait_idle(tty, MAX_SCHEDULE_TIMEOUT);
-
 	mutex_lock(&tty->ldisc_mutex);
 	/*
 	 * Now kill off the ldisc
@@ -931,18 +924,13 @@ static void tty_ldisc_kill(struct tty_struct *tty)
 void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 {
 	/*
-	 * Prevent flush_to_ldisc() from rescheduling the work for later.  Then
-	 * kill any delayed work. As this is the final close it does not
-	 * race with the set_ldisc code path.
+	 * Shutdown this line discipline. As this is the final close,
+	 * it does not race with the set_ldisc code path.
 	 */
 
-	tty_ldisc_halt(tty);
-	if (o_tty)
-		tty_ldisc_halt(o_tty);
+	tty_ldisc_debug(tty, "closing ldisc: %p\n", tty->ldisc);
 
-	tty_ldisc_flush_works(tty);
-	if (o_tty)
-		tty_ldisc_flush_works(o_tty);
+	tty_ldisc_halt(tty, o_tty, MAX_SCHEDULE_TIMEOUT);
 
 	tty_lock_pair(tty, o_tty);
 	/* This will need doing differently if we need to lock */
@@ -953,6 +941,8 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 	tty_unlock_pair(tty, o_tty);
 	/* And the memory resources remaining (buffers, termios) will be
 	   disposed of when the kref hits zero */
+
+	tty_ldisc_debug(tty, "ldisc closed\n");
 }
 
 /**
@@ -968,7 +958,7 @@ void tty_ldisc_init(struct tty_struct *tty)
 	struct tty_ldisc *ld = tty_ldisc_get(N_TTY);
 	if (IS_ERR(ld))
 		panic("n_tty: init_tty");
-	tty_ldisc_assign(tty, ld);
+	tty->ldisc = ld;
 }
 
 /**
@@ -980,8 +970,8 @@ void tty_ldisc_init(struct tty_struct *tty)
  */
 void tty_ldisc_deinit(struct tty_struct *tty)
 {
-	put_ldisc(tty->ldisc);
-	tty_ldisc_assign(tty, NULL);
+	tty_ldisc_put(tty->ldisc);
+	tty->ldisc = NULL;
 }
 
 void tty_ldisc_begin(void)
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index b7ff59d3db88..121aeb9393e1 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -132,6 +132,7 @@ EXPORT_SYMBOL(tty_port_free_xmit_buf);
  */
 void tty_port_destroy(struct tty_port *port)
 {
+	cancel_work_sync(&port->buf.work);
 	tty_buffer_free_all(port);
 }
 EXPORT_SYMBOL(tty_port_destroy);
@@ -196,12 +197,24 @@ void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty)
 }
 EXPORT_SYMBOL(tty_port_tty_set);
 
-static void tty_port_shutdown(struct tty_port *port)
+static void tty_port_shutdown(struct tty_port *port, struct tty_struct *tty)
 {
 	mutex_lock(&port->mutex);
-	if (port->ops->shutdown && !port->console &&
-		test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags))
+	if (port->console)
+		goto out;
+
+	if (test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) {
+		/*
+		 * Drop DTR/RTS if HUPCL is set. This causes any attached
+		 * modem to hang up the line.
+		 */
+		if (tty && C_HUPCL(tty))
+			tty_port_lower_dtr_rts(port);
+
+		if (port->ops->shutdown)
 			port->ops->shutdown(port);
+	}
+out:
 	mutex_unlock(&port->mutex);
 }
 
@@ -215,24 +228,58 @@ static void tty_port_shutdown(struct tty_port *port)
 
 void tty_port_hangup(struct tty_port *port)
 {
+	struct tty_struct *tty;
 	unsigned long flags;
 
 	spin_lock_irqsave(&port->lock, flags);
 	port->count = 0;
 	port->flags &= ~ASYNC_NORMAL_ACTIVE;
-	if (port->tty) {
-		set_bit(TTY_IO_ERROR, &port->tty->flags);
-		tty_kref_put(port->tty);
-	}
+	tty = port->tty;
+	if (tty)
+		set_bit(TTY_IO_ERROR, &tty->flags);
 	port->tty = NULL;
 	spin_unlock_irqrestore(&port->lock, flags);
+	tty_port_shutdown(port, tty);
+	tty_kref_put(tty);
 	wake_up_interruptible(&port->open_wait);
 	wake_up_interruptible(&port->delta_msr_wait);
-	tty_port_shutdown(port);
 }
 EXPORT_SYMBOL(tty_port_hangup);
 
 /**
+ * tty_port_tty_hangup - helper to hang up a tty
+ *
+ * @port: tty port
+ * @check_clocal: hang only ttys with CLOCAL unset?
+ */
+void tty_port_tty_hangup(struct tty_port *port, bool check_clocal)
+{
+	struct tty_struct *tty = tty_port_tty_get(port);
+
+	if (tty && (!check_clocal || !C_CLOCAL(tty))) {
+		tty_hangup(tty);
+		tty_kref_put(tty);
+	}
+}
+EXPORT_SYMBOL_GPL(tty_port_tty_hangup);
+
+/**
+ * tty_port_tty_wakeup - helper to wake up a tty
+ *
+ * @port: tty port
+ */
+void tty_port_tty_wakeup(struct tty_port *port)
+{
+	struct tty_struct *tty = tty_port_tty_get(port);
+
+	if (tty) {
+		tty_wakeup(tty);
+		tty_kref_put(tty);
+	}
+}
+EXPORT_SYMBOL_GPL(tty_port_tty_wakeup);
+
+/**
  *	tty_port_carrier_raised	-	carrier raised check
  *	@port: tty port
  *
@@ -350,7 +397,7 @@ int tty_port_block_til_ready(struct tty_port *port,
 
 	while (1) {
 		/* Indicate we are open */
-		if (tty->termios.c_cflag & CBAUD)
+		if (C_BAUD(tty) && test_bit(ASYNCB_INITIALIZED, &port->flags))
 			tty_port_raise_dtr_rts(port);
 
 		prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE);
@@ -395,6 +442,20 @@ int tty_port_block_til_ready(struct tty_port *port,
 }
 EXPORT_SYMBOL(tty_port_block_til_ready);
 
+static void tty_port_drain_delay(struct tty_port *port, struct tty_struct *tty)
+{
+	unsigned int bps = tty_get_baud_rate(tty);
+	long timeout;
+
+	if (bps > 1200) {
+		timeout = (HZ * 10 * port->drain_delay) / bps;
+		timeout = max_t(long, timeout, HZ / 10);
+	} else {
+		timeout = 2 * HZ;
+	}
+	schedule_timeout_interruptible(timeout);
+}
+
 int tty_port_close_start(struct tty_port *port,
 				struct tty_struct *tty, struct file *filp)
 {
@@ -427,31 +488,19 @@ int tty_port_close_start(struct tty_port *port,
 	set_bit(ASYNCB_CLOSING, &port->flags);
 	tty->closing = 1;
 	spin_unlock_irqrestore(&port->lock, flags);
-	/* Don't block on a stalled port, just pull the chain */
-	if (tty->flow_stopped)
-		tty_driver_flush_buffer(tty);
-	if (test_bit(ASYNCB_INITIALIZED, &port->flags) &&
-			port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-		tty_wait_until_sent_from_close(tty, port->closing_wait);
-	if (port->drain_delay) {
-		unsigned int bps = tty_get_baud_rate(tty);
-		long timeout;
-
-		if (bps > 1200)
-			timeout = max_t(long,
-				(HZ * 10 * port->drain_delay) / bps, HZ / 10);
-		else
-			timeout = 2 * HZ;
-		schedule_timeout_interruptible(timeout);
+
+	if (test_bit(ASYNCB_INITIALIZED, &port->flags)) {
+		/* Don't block on a stalled port, just pull the chain */
+		if (tty->flow_stopped)
+			tty_driver_flush_buffer(tty);
+		if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+			tty_wait_until_sent_from_close(tty, port->closing_wait);
+		if (port->drain_delay)
+			tty_port_drain_delay(port, tty);
 	}
 	/* Flush the ldisc buffering */
 	tty_ldisc_flush(tty);
 
-	/* Drop DTR/RTS if HUPCL is set. This causes any attached modem to
-	   hang up the line */
-	if (tty->termios.c_cflag & HUPCL)
-		tty_port_lower_dtr_rts(port);
-
 	/* Don't call port->drop for the last reference. Callers will want
 	   to drop the last active reference in ->shutdown() or the tty
 	   shutdown path */
@@ -486,7 +535,7 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty,
 {
 	if (tty_port_close_start(port, tty, filp) == 0)
 		return;
-	tty_port_shutdown(port);
+	tty_port_shutdown(port, tty);
 	set_bit(TTY_IO_ERROR, &tty->flags);
 	tty_port_close_end(port, tty);
 	tty_port_tty_set(port, NULL);
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 248381b30722..2978ca596a7f 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -194,8 +194,7 @@ static void set_inverse_transl(struct vc_data *conp, struct uni_pagedir *p, int
 	q = p->inverse_translations[i];
 
 	if (!q) {
-		q = p->inverse_translations[i] = (unsigned char *) 
-			kmalloc(MAX_GLYPH, GFP_KERNEL);
+		q = p->inverse_translations[i] = kmalloc(MAX_GLYPH, GFP_KERNEL);
 		if (!q) return;
 	}
 	memset(q, 0, MAX_GLYPH);
diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index e4ca345873c3..d7799deacb21 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -93,7 +93,7 @@ vcs_poll_data_free(struct vcs_poll_data *poll)
 static struct vcs_poll_data *
 vcs_poll_data_get(struct file *file)
 {
-	struct vcs_poll_data *poll = file->private_data;
+	struct vcs_poll_data *poll = file->private_data, *kill = NULL;
 
 	if (poll)
 		return poll;
@@ -122,10 +122,12 @@ vcs_poll_data_get(struct file *file)
 		file->private_data = poll;
 	} else {
 		/* someone else raced ahead of us */
-		vcs_poll_data_free(poll);
+		kill = poll;
 		poll = file->private_data;
 	}
 	spin_unlock(&file->f_lock);
+	if (kill)
+		vcs_poll_data_free(kill);
 
 	return poll;
 }
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index fbd447b390f7..740202d8a5c4 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -779,7 +779,6 @@ int vc_allocate(unsigned int currcons)	/* return 0 on success */
 		con_set_default_unimap(vc);
 	    vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
 	    if (!vc->vc_screenbuf) {
-		tty_port_destroy(&vc->port);
 		kfree(vc);
 		vc_cons[currcons].d = NULL;
 		return -ENOMEM;
@@ -986,26 +985,25 @@ static int vt_resize(struct tty_struct *tty, struct winsize *ws)
 	return ret;
 }
 
-void vc_deallocate(unsigned int currcons)
+struct vc_data *vc_deallocate(unsigned int currcons)
 {
+	struct vc_data *vc = NULL;
+
 	WARN_CONSOLE_UNLOCKED();
 
 	if (vc_cons_allocated(currcons)) {
-		struct vc_data *vc = vc_cons[currcons].d;
-		struct vt_notifier_param param = { .vc = vc };
+		struct vt_notifier_param param;
 
+		param.vc = vc = vc_cons[currcons].d;
 		atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, &param);
 		vcs_remove_sysfs(currcons);
 		vc->vc_sw->con_deinit(vc);
 		put_pid(vc->vt_pid);
 		module_put(vc->vc_sw->owner);
 		kfree(vc->vc_screenbuf);
-		if (currcons >= MIN_NR_CONSOLES) {
-			tty_port_destroy(&vc->port);
-			kfree(vc);
-		}
 		vc_cons[currcons].d = NULL;
 	}
+	return vc;
 }
 
 /*
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 98ff1735eafc..fc2c06c66e89 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -283,6 +283,51 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_
 	return 0;
 }
 
+/* deallocate a single console, if possible (leave 0) */
+static int vt_disallocate(unsigned int vc_num)
+{
+	struct vc_data *vc = NULL;
+	int ret = 0;
+
+	if (!vc_num)
+		return 0;
+
+	console_lock();
+	if (VT_BUSY(vc_num))
+		ret = -EBUSY;
+	else
+		vc = vc_deallocate(vc_num);
+	console_unlock();
+
+	if (vc && vc_num >= MIN_NR_CONSOLES) {
+		tty_port_destroy(&vc->port);
+		kfree(vc);
+	}
+
+	return ret;
+}
+
+/* deallocate all unused consoles, but leave 0 */
+static void vt_disallocate_all(void)
+{
+	struct vc_data *vc[MAX_NR_CONSOLES];
+	int i;
+
+	console_lock();
+	for (i = 1; i < MAX_NR_CONSOLES; i++)
+		if (!VT_BUSY(i))
+			vc[i] = vc_deallocate(i);
+		else
+			vc[i] = NULL;
+	console_unlock();
+
+	for (i = 1; i < MAX_NR_CONSOLES; i++) {
+		if (vc[i] && i >= MIN_NR_CONSOLES) {
+			tty_port_destroy(&vc[i]->port);
+			kfree(vc[i]);
+		}
+	}
+}
 
 
 /*
@@ -769,24 +814,10 @@ int vt_ioctl(struct tty_struct *tty,
 			ret = -ENXIO;
 			break;
 		}
-		if (arg == 0) {
-		    /* deallocate all unused consoles, but leave 0 */
-			console_lock();
-			for (i=1; i<MAX_NR_CONSOLES; i++)
-				if (! VT_BUSY(i))
-					vc_deallocate(i);
-			console_unlock();
-		} else {
-			/* deallocate a single console, if possible */
-			arg--;
-			if (VT_BUSY(arg))
-				ret = -EBUSY;
-			else if (arg) {			      /* leave 0 */
-				console_lock();
-				vc_deallocate(arg);
-				console_unlock();
-			}
-		}
+		if (arg == 0)
+			vt_disallocate_all();
+		else
+			ret = vt_disallocate(--arg);
 		break;
 
 	case VT_RESIZE: