Merge tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH: "Here is the large tty/serial patchset for 4.13-rc1. A lot of tty and serial driver updates are in here, along with some fixups for some __get/put_user usages that were reported. Nothing huge, just lots of development by a number of different developers, full details in the shortlog. All of these have been in linux-next for a while" * tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty: serial: lpuart: add a more accurate baud rate calculation method tty: serial: lpuart: add earlycon support for imx7ulp tty: serial: lpuart: add imx7ulp support dt-bindings: serial: fsl-lpuart: add i.MX7ULP support tty: serial: lpuart: add little endian 32 bit register support tty: serial: lpuart: refactor lpuart32_{read|write} prototype tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property serial: imx-serial - move DMA buffer configuration to DT serial: imx: Enable RTSD only when needed serial: imx: Remove unused members from imx_port struct serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout serial: 8250: Fix THRE flag usage for CAP_MINI tty/serial: meson_uart: update to stable bindings dt-bindings: serial: Add bindings for the Amlogic Meson UARTs serial: Delete dead code for CIR serial ports serial: sirf: make of_device_ids const serial/mpsc: switch to dma_alloc_attrs tty: serial: Add Actions Semi Owl UART earlycon dt-bindings: serial: Document Actions Semi Owl UARTs tty/serial: atmel: make the driver DT only ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2017-07-03 20:04:16 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2017-07-03 20:04:16 -0700
commit: 9a715cd54347948e74f1a597da22884af287727d (patch)
tree: 0a824e6501e9a8dcb3fdd05749e13c149e7dfb9f /drivers/tty
parent: Merge tag 'staging-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging (diff)
parent: tty: serial: lpuart: add a more accurate baud rate calculation method (diff)
download: linux-dev-9a715cd54347948e74f1a597da22884af287727d.tar.xz
linux-dev-9a715cd54347948e74f1a597da22884af287727d.zip
39 files changed, 1286 insertions, 519 deletions
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index f02becdb3e33..8689279afdf1 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_TTY)		+= tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \
 				   tty_buffer.o tty_port.o tty_mutex.o \
-				   tty_ldsem.o tty_baudrate.o tty_jobctrl.o
+				   tty_ldsem.o tty_baudrate.o tty_jobctrl.o \
+				   n_null.o
 obj-$(CONFIG_LEGACY_PTYS)	+= pty.o
 obj-$(CONFIG_UNIX98_PTYS)	+= pty.o
 obj-$(CONFIG_AUDIT)		+= tty_audit.o
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index dea16bb8c46a..9820e20993db 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -570,18 +570,6 @@ static int startup(struct tty_struct *tty, struct serial_state *info)
 	info->xmit.head = info->xmit.tail = 0;
 
 	/*
-	 * Set up the tty->alt_speed kludge
-	 */
-	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-		tty->alt_speed = 57600;
-	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-		tty->alt_speed = 115200;
-	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-		tty->alt_speed = 230400;
-	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-		tty->alt_speed = 460800;
-
-	/*
 	 * and set the speed of the serial port
 	 */
 	change_speed(tty, info, NULL);
@@ -1084,14 +1072,9 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
 check_and_exit:
 	if (tty_port_initialized(port)) {
 		if (change_spd) {
-			if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-				tty->alt_speed = 57600;
-			if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-				tty->alt_speed = 115200;
-			if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-				tty->alt_speed = 230400;
-			if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-				tty->alt_speed = 460800;
+			/* warn about deprecation unless clearing */
+			if (new_serial.flags & ASYNC_SPD_MASK)
+				dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n");
 			change_speed(tty, state, NULL);
 		}
 	} else
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index 104f09c58163..d272bc4e7fb5 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -1975,18 +1975,6 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 	cflag = tty->termios.c_cflag;
 	iflag = tty->termios.c_iflag;
 
-	/*
-	 * Set up the tty->alt_speed kludge
-	 */
-	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-		tty->alt_speed = 57600;
-	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-		tty->alt_speed = 115200;
-	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-		tty->alt_speed = 230400;
-	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-		tty->alt_speed = 460800;
-
 	card = info->card;
 	channel = info->line - card->first_line;
 
@@ -2295,12 +2283,16 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
 		struct serial_struct __user *new_info)
 {
 	struct serial_struct new_serial;
+	int old_flags;
 	int ret;
 
 	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
 		return -EFAULT;
 
 	mutex_lock(&info->port.mutex);
+
+	old_flags = info->port.flags;
+
 	if (!capable(CAP_SYS_ADMIN)) {
 		if (new_serial.close_delay != info->port.close_delay ||
 				new_serial.baud_base != info->baud ||
@@ -2332,6 +2324,11 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
 
 check_and_exit:
 	if (tty_port_initialized(&info->port)) {
+		if ((new_serial.flags ^ old_flags) & ASYNC_SPD_MASK) {
+			/* warn about deprecation unless clearing */
+			if (new_serial.flags & ASYNC_SPD_MASK)
+				dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n");
+		}
 		cy_set_line_char(info, tty);
 		ret = 0;
 	} else {
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 99bb875178d7..423e28ec27fb 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1242,8 +1242,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 		free_irq(irq, hvcsd);
 		return;
 	} else if (hvcsd->port.count < 0) {
-		printk(KERN_ERR "HVCS: vty-server@%X open_count: %d"
-				" is missmanaged.\n",
+		printk(KERN_ERR "HVCS: vty-server@%X open_count: %d is mismanaged.\n",
 		hvcsd->vdev->unit_address, hvcsd->port.count);
 	}
 
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 2667a205a5ab..363a8ca824ad 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2015,6 +2015,33 @@ static void gsm_error(struct gsm_mux *gsm,
 	gsm->io_error++;
 }
 
+static int gsm_disconnect(struct gsm_mux *gsm)
+{
+	struct gsm_dlci *dlci = gsm->dlci[0];
+	struct gsm_control *gc;
+
+	if (!dlci)
+		return 0;
+
+	/* In theory disconnecting DLCI 0 is sufficient but for some
+	   modems this is apparently not the case. */
+	gc = gsm_control_send(gsm, CMD_CLD, NULL, 0);
+	if (gc)
+		gsm_control_wait(gsm, gc);
+
+	del_timer_sync(&gsm->t2_timer);
+	/* Now we are sure T2 has stopped */
+
+	gsm_dlci_begin_close(dlci);
+	wait_event_interruptible(gsm->event,
+				dlci->state == DLCI_CLOSED);
+
+	if (signal_pending(current))
+		return -EINTR;
+
+	return 0;
+}
+
 /**
  *	gsm_cleanup_mux		-	generic GSM protocol cleanup
  *	@gsm: our mux
@@ -2029,7 +2056,6 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm)
 	int i;
 	struct gsm_dlci *dlci = gsm->dlci[0];
 	struct gsm_msg *txq, *ntxq;
-	struct gsm_control *gc;
 
 	gsm->dead = 1;
 
@@ -2045,21 +2071,11 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm)
 	if (i == MAX_MUX)
 		return;
 
-	/* In theory disconnecting DLCI 0 is sufficient but for some
-	   modems this is apparently not the case. */
-	if (dlci) {
-		gc = gsm_control_send(gsm, CMD_CLD, NULL, 0);
-		if (gc)
-			gsm_control_wait(gsm, gc);
-	}
 	del_timer_sync(&gsm->t2_timer);
 	/* Now we are sure T2 has stopped */
-	if (dlci) {
+	if (dlci)
 		dlci->dead = 1;
-		gsm_dlci_begin_close(dlci);
-		wait_event_interruptible(gsm->event,
-					dlci->state == DLCI_CLOSED);
-	}
+
 	/* Free up any link layer users */
 	mutex_lock(&gsm->mutex);
 	for (i = 0; i < NUM_DLCI; i++)
@@ -2519,12 +2535,12 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
 	 */
 
 	if (need_close || need_restart) {
-		gsm_dlci_begin_close(gsm->dlci[0]);
-		/* This will timeout if the link is down due to N2 expiring */
-		wait_event_interruptible(gsm->event,
-				gsm->dlci[0]->state == DLCI_CLOSED);
-		if (signal_pending(current))
-			return -EINTR;
+		int ret;
+
+		ret = gsm_disconnect(gsm);
+
+		if (ret)
+			return ret;
 	}
 	if (need_restart)
 		gsm_cleanup_mux(gsm);
diff --git a/drivers/tty/n_null.c b/drivers/tty/n_null.c
new file mode 100644
index 000000000000..d63261c36e42
--- /dev/null
+++ b/drivers/tty/n_null.c
@@ -0,0 +1,80 @@
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+
+/*
+ *  n_null.c - Null line discipline used in the failure path
+ *
+ *  Copyright (C) Intel 2017
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+static int n_null_open(struct tty_struct *tty)
+{
+	return 0;
+}
+
+static void n_null_close(struct tty_struct *tty)
+{
+}
+
+static ssize_t n_null_read(struct tty_struct *tty, struct file *file,
+			   unsigned char __user * buf, size_t nr)
+{
+	return -EOPNOTSUPP;
+}
+
+static ssize_t n_null_write(struct tty_struct *tty, struct file *file,
+			    const unsigned char *buf, size_t nr)
+{
+	return -EOPNOTSUPP;
+}
+
+static void n_null_receivebuf(struct tty_struct *tty,
+				 const unsigned char *cp, char *fp,
+				 int cnt)
+{
+}
+
+static struct tty_ldisc_ops null_ldisc = {
+	.owner		=	THIS_MODULE,
+	.magic		=	TTY_LDISC_MAGIC,
+	.name		=	"n_null",
+	.open		=	n_null_open,
+	.close		=	n_null_close,
+	.read		=	n_null_read,
+	.write		=	n_null_write,
+	.receive_buf	=	n_null_receivebuf
+};
+
+static int __init n_null_init(void)
+{
+	BUG_ON(tty_register_ldisc(N_NULL, &null_ldisc));
+	return 0;
+}
+
+static void __exit n_null_exit(void)
+{
+	tty_unregister_ldisc(N_NULL);
+}
+
+module_init(n_null_init);
+module_exit(n_null_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alan Cox");
+MODULE_ALIAS_LDISC(N_NULL);
+MODULE_DESCRIPTION("Null ldisc driver");
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 65799575c666..d1399aac05a1 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -24,6 +24,9 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/poll.h>
+#include <linux/mount.h>
+#include <linux/file.h>
+#include <linux/ioctl.h>
 
 #undef TTY_DEBUG_HANGUP
 #ifdef TTY_DEBUG_HANGUP
@@ -66,8 +69,13 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
 #ifdef CONFIG_UNIX98_PTYS
 		if (tty->driver == ptm_driver) {
 			mutex_lock(&devpts_mutex);
-			if (tty->link->driver_data)
-				devpts_pty_kill(tty->link->driver_data);
+			if (tty->link->driver_data) {
+				struct path *path = tty->link->driver_data;
+
+				devpts_pty_kill(path->dentry);
+				path_put(path);
+				kfree(path);
+			}
 			mutex_unlock(&devpts_mutex);
 		}
 #endif
@@ -440,6 +448,48 @@ err:
 	return retval;
 }
 
+/**
+ *	pty_open_peer - open the peer of a pty
+ *	@tty: the peer of the pty being opened
+ *
+ *	Open the cached dentry in tty->link, providing a safe way for userspace
+ *	to get the slave end of a pty (where they have the master fd and cannot
+ *	access or trust the mount namespace /dev/pts was mounted inside).
+ */
+static struct file *pty_open_peer(struct tty_struct *tty, int flags)
+{
+	if (tty->driver->subtype != PTY_TYPE_MASTER)
+		return ERR_PTR(-EIO);
+	return dentry_open(tty->link->driver_data, flags, current_cred());
+}
+
+static int pty_get_peer(struct tty_struct *tty, int flags)
+{
+	int fd = -1;
+	struct file *filp = NULL;
+	int retval = -EINVAL;
+
+	fd = get_unused_fd_flags(0);
+	if (fd < 0) {
+		retval = fd;
+		goto err;
+	}
+
+	filp = pty_open_peer(tty, flags);
+	if (IS_ERR(filp)) {
+		retval = PTR_ERR(filp);
+		goto err_put;
+	}
+
+	fd_install(fd, filp);
+	return fd;
+
+err_put:
+	put_unused_fd(fd);
+err:
+	return retval;
+}
+
 static void pty_cleanup(struct tty_struct *tty)
 {
 	tty_port_put(tty->port);
@@ -481,6 +531,16 @@ static int pty_bsd_ioctl(struct tty_struct *tty,
 	return -ENOIOCTLCMD;
 }
 
+static long pty_bsd_compat_ioctl(struct tty_struct *tty,
+				 unsigned int cmd, unsigned long arg)
+{
+	/*
+	 * PTY ioctls don't require any special translation between 32-bit and
+	 * 64-bit userspace, they are already compatible.
+	 */
+	return pty_bsd_ioctl(tty, cmd, arg);
+}
+
 static int legacy_count = CONFIG_LEGACY_PTY_COUNT;
 /*
  * not really modular, but the easiest way to keep compat with existing
@@ -502,6 +562,7 @@ static const struct tty_operations master_pty_ops_bsd = {
 	.chars_in_buffer = pty_chars_in_buffer,
 	.unthrottle = pty_unthrottle,
 	.ioctl = pty_bsd_ioctl,
+	.compat_ioctl = pty_bsd_compat_ioctl,
 	.cleanup = pty_cleanup,
 	.resize = pty_resize,
 	.remove = pty_remove
@@ -602,6 +663,8 @@ static int pty_unix98_ioctl(struct tty_struct *tty,
 		return pty_get_pktmode(tty, (int __user *)arg);
 	case TIOCGPTN: /* Get PT Number */
 		return put_user(tty->index, (unsigned int __user *)arg);
+	case TIOCGPTPEER: /* Open the other end */
+		return pty_get_peer(tty, (int) arg);
 	case TIOCSIG:    /* Send signal to other side of pty */
 		return pty_signal(tty, (int) arg);
 	}
@@ -609,6 +672,16 @@ static int pty_unix98_ioctl(struct tty_struct *tty,
 	return -ENOIOCTLCMD;
 }
 
+static long pty_unix98_compat_ioctl(struct tty_struct *tty,
+				 unsigned int cmd, unsigned long arg)
+{
+	/*
+	 * PTY ioctls don't require any special translation between 32-bit and
+	 * 64-bit userspace, they are already compatible.
+	 */
+	return pty_unix98_ioctl(tty, cmd, arg);
+}
+
 /**
  *	ptm_unix98_lookup	-	find a pty master
  *	@driver: ptm driver
@@ -681,6 +754,7 @@ static const struct tty_operations ptm_unix98_ops = {
 	.chars_in_buffer = pty_chars_in_buffer,
 	.unthrottle = pty_unthrottle,
 	.ioctl = pty_unix98_ioctl,
+	.compat_ioctl = pty_unix98_compat_ioctl,
 	.resize = pty_resize,
 	.cleanup = pty_cleanup
 };
@@ -718,6 +792,7 @@ static int ptmx_open(struct inode *inode, struct file *filp)
 {
 	struct pts_fs_info *fsi;
 	struct tty_struct *tty;
+	struct path *pts_path;
 	struct dentry *dentry;
 	int retval;
 	int index;
@@ -771,16 +846,26 @@ static int ptmx_open(struct inode *inode, struct file *filp)
 		retval = PTR_ERR(dentry);
 		goto err_release;
 	}
-	tty->link->driver_data = dentry;
+	/* We need to cache a fake path for TIOCGPTPEER. */
+	pts_path = kmalloc(sizeof(struct path), GFP_KERNEL);
+	if (!pts_path)
+		goto err_release;
+	pts_path->mnt = filp->f_path.mnt;
+	pts_path->dentry = dentry;
+	path_get(pts_path);
+	tty->link->driver_data = pts_path;
 
 	retval = ptm_driver->ops->open(tty, filp);
 	if (retval)
-		goto err_release;
+		goto err_path_put;
 
 	tty_debug_hangup(tty, "opening (count=%d)\n", tty->count);
 
 	tty_unlock(tty);
 	return 0;
+err_path_put:
+	path_put(pts_path);
+	kfree(pts_path);
 err_release:
 	tty_unlock(tty);
 	// This will also put-ref the fsi
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index b51a877da986..20d79a6007d5 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -947,18 +947,6 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
 
 		tty_port_set_initialized(&info->port, 1);
 
-		/*
-		 * Set up the tty->alt_speed kludge
-		 */
-		if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
-			tty->alt_speed = 57600;
-		if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
-			tty->alt_speed = 115200;
-		if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
-			tty->alt_speed = 230400;
-		if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
-			tty->alt_speed = 460800;
-
 		configure_r_port(tty, info, NULL);
 		if (C_BAUD(tty)) {
 			sSetDTR(cp);
@@ -1219,23 +1207,20 @@ static int set_config(struct tty_struct *tty, struct r_port *info,
 			return -EPERM;
 		}
 		info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
-		configure_r_port(tty, info, NULL);
 		mutex_unlock(&info->port.mutex);
 		return 0;
 	}
 
+	if ((new_serial.flags ^ info->flags) & ROCKET_SPD_MASK) {
+		/* warn about deprecation, unless clearing */
+		if (new_serial.flags & ROCKET_SPD_MASK)
+			dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n");
+	}
+
 	info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS));
 	info->port.close_delay = new_serial.close_delay;
 	info->port.closing_wait = new_serial.closing_wait;
 
-	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
-		tty->alt_speed = 57600;
-	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
-		tty->alt_speed = 115200;
-	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
-		tty->alt_speed = 230400;
-	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
-		tty->alt_speed = 460800;
 	mutex_unlock(&info->port.mutex);
 
 	configure_r_port(tty, info, NULL);
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index d0a021c93986..302018d67efa 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -148,7 +148,7 @@ static unsigned int ttyport_set_baudrate(struct serdev_controller *ctrl, unsigne
 
 	/* tty_set_termios() return not checked as it is always 0 */
 	tty_set_termios(tty, &ktermios);
-	return speed;
+	return ktermios.c_ospeed;
 }
 
 static void ttyport_set_flow_control(struct serdev_controller *ctrl, bool enable)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index ce8d4ffcc425..b2bdc35f7495 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -81,6 +81,9 @@ struct serial8250_config {
 #define UART_CAP_HFIFO	(1 << 14)	/* UART has a "hidden" FIFO */
 #define UART_CAP_RPM	(1 << 15)	/* Runtime PM is active while idle */
 #define UART_CAP_IRDA	(1 << 16)	/* UART supports IrDA line discipline */
+#define UART_CAP_MINI	(1 << 17)	/* Mini UART on BCM283X family lacks:
+					 * STOP PARITY EPAR SPAR WLEN5 WLEN6
+					 */
 
 #define UART_BUG_QUOT	(1 << 0)	/* UART has buggy quot LSB */
 #define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
new file mode 100644
index 000000000000..822be4906763
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -0,0 +1,323 @@
+/*
+ *  Serial Port driver for Aspeed VUART device
+ *
+ *    Copyright (C) 2016 Jeremy Kerr <jk@ozlabs.org>, IBM Corp.
+ *    Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+
+#include "8250.h"
+
+#define ASPEED_VUART_GCRA		0x20
+#define ASPEED_VUART_GCRA_VUART_EN		BIT(0)
+#define ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD BIT(5)
+#define ASPEED_VUART_GCRB		0x24
+#define ASPEED_VUART_GCRB_HOST_SIRQ_MASK	GENMASK(7, 4)
+#define ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT	4
+#define ASPEED_VUART_ADDRL		0x28
+#define ASPEED_VUART_ADDRH		0x2c
+
+struct aspeed_vuart {
+	struct device		*dev;
+	void __iomem		*regs;
+	struct clk		*clk;
+	int			line;
+};
+
+/*
+ * The VUART is basically two UART 'front ends' connected by their FIFO
+ * (no actual serial line in between). One is on the BMC side (management
+ * controller) and one is on the host CPU side.
+ *
+ * It allows the BMC to provide to the host a "UART" that pipes into
+ * the BMC itself and can then be turned by the BMC into a network console
+ * of some sort for example.
+ *
+ * This driver is for the BMC side. The sysfs files allow the BMC
+ * userspace which owns the system configuration policy, to specify
+ * at what IO port and interrupt number the host side will appear
+ * to the host on the Host <-> BMC LPC bus. It could be different on a
+ * different system (though most of them use 3f8/4).
+ */
+
+static ssize_t lpc_address_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+	u16 addr;
+
+	addr = (readb(vuart->regs + ASPEED_VUART_ADDRH) << 8) |
+		(readb(vuart->regs + ASPEED_VUART_ADDRL));
+
+	return snprintf(buf, PAGE_SIZE - 1, "0x%x\n", addr);
+}
+
+static ssize_t lpc_address_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 0, &val);
+	if (err)
+		return err;
+
+	writeb(val >> 8, vuart->regs + ASPEED_VUART_ADDRH);
+	writeb(val >> 0, vuart->regs + ASPEED_VUART_ADDRL);
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(lpc_address);
+
+static ssize_t sirq_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+	u8 reg;
+
+	reg = readb(vuart->regs + ASPEED_VUART_GCRB);
+	reg &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK;
+	reg >>= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT;
+
+	return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg);
+}
+
+static ssize_t sirq_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+	unsigned long val;
+	int err;
+	u8 reg;
+
+	err = kstrtoul(buf, 0, &val);
+	if (err)
+		return err;
+
+	val <<= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT;
+	val &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK;
+
+	reg = readb(vuart->regs + ASPEED_VUART_GCRB);
+	reg &= ~ASPEED_VUART_GCRB_HOST_SIRQ_MASK;
+	reg |= val;
+	writeb(reg, vuart->regs + ASPEED_VUART_GCRB);
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(sirq);
+
+static struct attribute *aspeed_vuart_attrs[] = {
+	&dev_attr_sirq.attr,
+	&dev_attr_lpc_address.attr,
+	NULL,
+};
+
+static const struct attribute_group aspeed_vuart_attr_group = {
+	.attrs = aspeed_vuart_attrs,
+};
+
+static void aspeed_vuart_set_enabled(struct aspeed_vuart *vuart, bool enabled)
+{
+	u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+
+	if (enabled)
+		reg |= ASPEED_VUART_GCRA_VUART_EN;
+	else
+		reg &= ~ASPEED_VUART_GCRA_VUART_EN;
+
+	writeb(reg, vuart->regs + ASPEED_VUART_GCRA);
+}
+
+static void aspeed_vuart_set_host_tx_discard(struct aspeed_vuart *vuart,
+					     bool discard)
+{
+	u8 reg;
+
+	reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+
+	/* If the DISABLE_HOST_TX_DISCARD bit is set, discard is disabled */
+	if (!discard)
+		reg |= ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD;
+	else
+		reg &= ~ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD;
+
+	writeb(reg, vuart->regs + ASPEED_VUART_GCRA);
+}
+
+static int aspeed_vuart_startup(struct uart_port *uart_port)
+{
+	struct uart_8250_port *uart_8250_port = up_to_u8250p(uart_port);
+	struct aspeed_vuart *vuart = uart_8250_port->port.private_data;
+	int rc;
+
+	rc = serial8250_do_startup(uart_port);
+	if (rc)
+		return rc;
+
+	aspeed_vuart_set_host_tx_discard(vuart, false);
+
+	return 0;
+}
+
+static void aspeed_vuart_shutdown(struct uart_port *uart_port)
+{
+	struct uart_8250_port *uart_8250_port = up_to_u8250p(uart_port);
+	struct aspeed_vuart *vuart = uart_8250_port->port.private_data;
+
+	aspeed_vuart_set_host_tx_discard(vuart, true);
+
+	serial8250_do_shutdown(uart_port);
+}
+
+static int aspeed_vuart_probe(struct platform_device *pdev)
+{
+	struct uart_8250_port port;
+	struct aspeed_vuart *vuart;
+	struct device_node *np;
+	struct resource *res;
+	u32 clk, prop;
+	int rc;
+
+	np = pdev->dev.of_node;
+
+	vuart = devm_kzalloc(&pdev->dev, sizeof(*vuart), GFP_KERNEL);
+	if (!vuart)
+		return -ENOMEM;
+
+	vuart->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	vuart->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(vuart->regs))
+		return PTR_ERR(vuart->regs);
+
+	memset(&port, 0, sizeof(port));
+	port.port.private_data = vuart;
+	port.port.membase = vuart->regs;
+	port.port.mapbase = res->start;
+	port.port.mapsize = resource_size(res);
+	port.port.startup = aspeed_vuart_startup;
+	port.port.shutdown = aspeed_vuart_shutdown;
+	port.port.dev = &pdev->dev;
+
+	rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
+	if (rc < 0)
+		return rc;
+
+	if (of_property_read_u32(np, "clock-frequency", &clk)) {
+		vuart->clk = devm_clk_get(&pdev->dev, NULL);
+		if (IS_ERR(vuart->clk)) {
+			dev_warn(&pdev->dev,
+				"clk or clock-frequency not defined\n");
+			return PTR_ERR(vuart->clk);
+		}
+
+		rc = clk_prepare_enable(vuart->clk);
+		if (rc < 0)
+			return rc;
+
+		clk = clk_get_rate(vuart->clk);
+	}
+
+	/* If current-speed was set, then try not to change it. */
+	if (of_property_read_u32(np, "current-speed", &prop) == 0)
+		port.port.custom_divisor = clk / (16 * prop);
+
+	/* Check for shifted address mapping */
+	if (of_property_read_u32(np, "reg-offset", &prop) == 0)
+		port.port.mapbase += prop;
+
+	/* Check for registers offset within the devices address range */
+	if (of_property_read_u32(np, "reg-shift", &prop) == 0)
+		port.port.regshift = prop;
+
+	/* Check for fifo size */
+	if (of_property_read_u32(np, "fifo-size", &prop) == 0)
+		port.port.fifosize = prop;
+
+	/* Check for a fixed line number */
+	rc = of_alias_get_id(np, "serial");
+	if (rc >= 0)
+		port.port.line = rc;
+
+	port.port.irq = irq_of_parse_and_map(np, 0);
+	port.port.irqflags = IRQF_SHARED;
+	port.port.iotype = UPIO_MEM;
+	port.port.type = PORT_16550A;
+	port.port.uartclk = clk;
+	port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF
+		| UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST;
+
+	if (of_property_read_bool(np, "no-loopback-test"))
+		port.port.flags |= UPF_SKIP_TEST;
+
+	if (port.port.fifosize)
+		port.capabilities = UART_CAP_FIFO;
+
+	if (of_property_read_bool(np, "auto-flow-control"))
+		port.capabilities |= UART_CAP_AFE;
+
+	rc = serial8250_register_8250_port(&port);
+	if (rc < 0)
+		goto err_clk_disable;
+
+	vuart->line = rc;
+
+	aspeed_vuart_set_enabled(vuart, true);
+	aspeed_vuart_set_host_tx_discard(vuart, true);
+	platform_set_drvdata(pdev, vuart);
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(vuart->clk);
+	irq_dispose_mapping(port.port.irq);
+	return rc;
+}
+
+static int aspeed_vuart_remove(struct platform_device *pdev)
+{
+	struct aspeed_vuart *vuart = platform_get_drvdata(pdev);
+
+	aspeed_vuart_set_enabled(vuart, false);
+	serial8250_unregister_port(vuart->line);
+	sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
+	clk_disable_unprepare(vuart->clk);
+
+	return 0;
+}
+
+static const struct of_device_id aspeed_vuart_table[] = {
+	{ .compatible = "aspeed,ast2400-vuart" },
+	{ .compatible = "aspeed,ast2500-vuart" },
+	{ },
+};
+
+static struct platform_driver aspeed_vuart_driver = {
+	.driver = {
+		.name = "aspeed-vuart",
+		.of_match_table = aspeed_vuart_table,
+	},
+	.probe = aspeed_vuart_probe,
+	.remove = aspeed_vuart_remove,
+};
+
+module_platform_driver(aspeed_vuart_driver);
+
+MODULE_AUTHOR("Jeremy Kerr <jk@ozlabs.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for Aspeed VUART device");
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index e10f1244409b..a23c7da42ea8 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -39,7 +39,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
 
 	/* initialize data */
 	spin_lock_init(&data->uart.port.lock);
-	data->uart.capabilities = UART_CAP_FIFO;
+	data->uart.capabilities = UART_CAP_FIFO | UART_CAP_MINI;
 	data->uart.port.dev = &pdev->dev;
 	data->uart.port.regshift = 2;
 	data->uart.port.type = PORT_16550;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 1aab3010fbfa..b5def356af63 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1043,24 +1043,13 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 		if (up->dl_write)
 			uart->dl_write = up->dl_write;
 
-		if (uart->port.type != PORT_8250_CIR) {
-			if (serial8250_isa_config != NULL)
-				serial8250_isa_config(0, &uart->port,
-						&uart->capabilities);
-
-			ret = uart_add_one_port(&serial8250_reg,
-						&uart->port);
-			if (ret == 0)
-				ret = uart->port.line;
-		} else {
-			dev_info(uart->port.dev,
-				"skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
-				uart->port.iobase,
-				(unsigned long long)uart->port.mapbase,
-				uart->port.irq);
+		if (serial8250_isa_config != NULL)
+			serial8250_isa_config(0, &uart->port,
+					&uart->capabilities);
 
-			ret = 0;
-		}
+		ret = uart_add_one_port(&serial8250_reg, &uart->port);
+		if (ret == 0)
+			ret = uart->port.line;
 	}
 	mutex_unlock(&serial_mutex);
 
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 1270ff163f63..a309bcffffcd 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -109,7 +109,6 @@ pci_fastcom335_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 	u8 __iomem *p;
 	int err;
 
-	port->port.flags |= UPF_EXAR_EFR;
 	port->port.uartclk = baud * 16;
 
 	err = default_setup(priv, pcidev, idx, offset, port);
@@ -171,19 +170,26 @@ pci_xr17c154_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 	return default_setup(priv, pcidev, idx, offset, port);
 }
 
-static void setup_gpio(u8 __iomem *p)
+static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p)
 {
+	/*
+	 * The Commtech adapters required the MPIOs to be driven low. The Exar
+	 * devices will export them as GPIOs, so we pre-configure them safely
+	 * as inputs.
+	 */
+	u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00;
+
 	writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
 	writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
 	writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
 	writeb(0x00, p + UART_EXAR_MPIOINV_7_0);
-	writeb(0x00, p + UART_EXAR_MPIOSEL_7_0);
+	writeb(dir,  p + UART_EXAR_MPIOSEL_7_0);
 	writeb(0x00, p + UART_EXAR_MPIOOD_7_0);
 	writeb(0x00, p + UART_EXAR_MPIOINT_15_8);
 	writeb(0x00, p + UART_EXAR_MPIOLVL_15_8);
 	writeb(0x00, p + UART_EXAR_MPIO3T_15_8);
 	writeb(0x00, p + UART_EXAR_MPIOINV_15_8);
-	writeb(0x00, p + UART_EXAR_MPIOSEL_15_8);
+	writeb(dir,  p + UART_EXAR_MPIOSEL_15_8);
 	writeb(0x00, p + UART_EXAR_MPIOOD_15_8);
 }
 
@@ -236,7 +242,7 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 
 	if (idx == 0) {
 		/* Setup Multipurpose Input/Output pins. */
-		setup_gpio(p);
+		setup_gpio(pcidev, p);
 
 		port->port.private_data = xr17v35x_register_gpio(pcidev);
 	}
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 1cbadafc6889..0cf95fddccfc 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -19,11 +19,13 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/clk.h>
+#include <linux/reset.h>
 
 #include "8250.h"
 
 struct of_serial_info {
 	struct clk *clk;
+	struct reset_control *rst;
 	int type;
 	int line;
 };
@@ -132,6 +134,13 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 		}
 	}
 
+	info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
+	if (IS_ERR(info->rst))
+		goto out;
+	ret = reset_control_deassert(info->rst);
+	if (ret)
+		goto out;
+
 	port->type = type;
 	port->uartclk = clk;
 	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
@@ -229,6 +238,7 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
 
 	serial8250_unregister_port(info->line);
 
+	reset_control_assert(info->rst);
 	if (info->clk)
 		clk_disable_unprepare(info->clk);
 	kfree(info);
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index e7e64913a748..833771bca0a5 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -613,6 +613,10 @@ static int omap_8250_startup(struct uart_port *port)
 	up->lsr_saved_flags = 0;
 	up->msr_saved_flags = 0;
 
+	/* Disable DMA for console UART */
+	if (uart_console(port))
+		up->dma = NULL;
+
 	if (up->dma) {
 		ret = serial8250_request_dma(up);
 		if (ret) {
@@ -782,8 +786,27 @@ unlock:
 
 static void __dma_rx_complete(void *param)
 {
-	__dma_rx_do_complete(param);
-	omap_8250_rx_dma(param);
+	struct uart_8250_port *p = param;
+	struct uart_8250_dma *dma = p->dma;
+	struct dma_tx_state     state;
+	unsigned long flags;
+
+	spin_lock_irqsave(&p->port.lock, flags);
+
+	/*
+	 * If the tx status is not DMA_COMPLETE, then this is a delayed
+	 * completion callback. A previous RX timeout flush would have
+	 * already pushed the data, so exit.
+	 */
+	if (dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state) !=
+			DMA_COMPLETE) {
+		spin_unlock_irqrestore(&p->port.lock, flags);
+		return;
+	}
+	__dma_rx_do_complete(p);
+	omap_8250_rx_dma(p);
+
+	spin_unlock_irqrestore(&p->port.lock, flags);
 }
 
 static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 68fd045a7025..a5fe0e66c607 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1764,6 +1764,10 @@ void serial8250_tx_chars(struct uart_8250_port *up)
 		if ((up->capabilities & UART_CAP_HFIFO) &&
 		    (serial_in(up, UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY)
 			break;
+		/* The BCM2835 MINI UART THRE bit is really a not-full bit. */
+		if ((up->capabilities & UART_CAP_MINI) &&
+		    !(serial_in(up, UART_LSR) & UART_LSR_THRE))
+			break;
 	} while (--count > 0);
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -2228,7 +2232,7 @@ int serial8250_do_startup(struct uart_port *port)
 		}
 	}
 
-	if (port->irq) {
+	if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) {
 		unsigned char iir1;
 		/*
 		 * Test for UARTs that do not reassert THRE when the
@@ -2585,6 +2589,12 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned long flags;
 	unsigned int baud, quot, frac = 0;
 
+	if (up->capabilities & UART_CAP_MINI) {
+		termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR);
+		if ((termios->c_cflag & CSIZE) == CS5 ||
+		    (termios->c_cflag & CSIZE) == CS6)
+			termios->c_cflag = (termios->c_cflag & ~CSIZE) | CS7;
+	}
 	cval = serial8250_compute_lcr(up, termios->c_cflag);
 
 	baud = serial8250_get_baud_rate(port, termios, old);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 0e3f529d50e9..a1161ec0256f 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -224,6 +224,16 @@ config SERIAL_8250_ACCENT
 	  To compile this driver as a module, choose M here: the module
 	  will be called 8250_accent.
 
+config SERIAL_8250_ASPEED_VUART
+	tristate "Aspeed Virtual UART"
+	depends on SERIAL_8250
+	depends on OF
+	help
+	  If you want to use the virtual UART (VUART) device on Aspeed
+	  BMC platforms, enable this option. This enables the 16550A-
+	  compatible device on the local LPC bus, giving a UART device
+	  with no physical RS232 connections.
+
 config SERIAL_8250_BOCA
 	tristate "Support Boca cards"
 	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 2f30f9ecdb1b..a44a99a3e623 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR)		+= 8250_exar.o
 obj-$(CONFIG_SERIAL_8250_HP300)		+= 8250_hp300.o
 obj-$(CONFIG_SERIAL_8250_CS)		+= serial_cs.o
 obj-$(CONFIG_SERIAL_8250_ACORN)		+= 8250_acorn.o
+obj-$(CONFIG_SERIAL_8250_ASPEED_VUART)	+= 8250_aspeed_vuart.o
 obj-$(CONFIG_SERIAL_8250_BCM2835AUX)	+= 8250_bcm2835aux.o
 obj-$(CONFIG_SERIAL_8250_CONSOLE)	+= 8250_early.o
 obj-$(CONFIG_SERIAL_8250_FOURPORT)	+= 8250_fourport.o
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 5c8850f7a2a0..1f096e2bb398 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -114,32 +114,32 @@ config SERIAL_SB1250_DUART_CONSOLE
 	  If unsure, say Y.
 
 config SERIAL_ATMEL
-	bool "AT91 / AT32 on-chip serial port support"
+	bool "AT91 on-chip serial port support"
 	depends on HAS_DMA
-	depends on ARCH_AT91 || AVR32 || COMPILE_TEST
+	depends on ARCH_AT91 || COMPILE_TEST
 	select SERIAL_CORE
 	select SERIAL_MCTRL_GPIO if GPIOLIB
 	help
 	  This enables the driver for the on-chip UARTs of the Atmel
-	  AT91 and AT32 processors.
+	  AT91 processors.
 
 config SERIAL_ATMEL_CONSOLE
-	bool "Support for console on AT91 / AT32 serial port"
+	bool "Support for console on AT91 serial port"
 	depends on SERIAL_ATMEL=y
 	select SERIAL_CORE_CONSOLE
 	help
 	  Say Y here if you wish to use an on-chip UART on a Atmel
-	  AT91 or AT32 processor as the system console (the system
+	  AT91 processor as the system console (the system
 	  console is the device which receives all kernel messages and
 	  warnings and which allows logins in single user mode).
 
 config SERIAL_ATMEL_PDC
-	bool "Support DMA transfers on AT91 / AT32 serial port"
+	bool "Support DMA transfers on AT91 serial port"
 	depends on SERIAL_ATMEL
 	default y
 	help
 	  Say Y here if you wish to use the PDC to do DMA transfers to
-	  and from the Atmel AT91 / AT32 serial port. In order to
+	  and from the Atmel AT91 serial port. In order to
 	  actually use DMA transfers, make sure that the use_dma_tx
 	  and use_dma_rx members in the atmel_uart_data struct is set
 	  appropriately for each port.
@@ -152,7 +152,7 @@ config SERIAL_ATMEL_TTYAT
 	bool "Install as device ttyATn instead of ttySn"
 	depends on SERIAL_ATMEL=y
 	help
-	  Say Y here if you wish to have the internal AT91 / AT32 UARTs
+	  Say Y here if you wish to have the internal AT91 UARTs
 	  appear as /dev/ttyATn (major 204, minor starting at 154)
 	  instead of the normal /dev/ttySn (major 4, minor starting at
 	  64). This is necessary if you also want other UARTs, such as
@@ -1688,6 +1688,25 @@ config SERIAL_MVEBU_CONSOLE
 	  and warnings and which allows logins in single user mode)
 	  Otherwise, say 'N'.
 
+config SERIAL_OWL
+	bool "Actions Semi Owl serial port support"
+	depends on ARCH_ACTIONS || COMPILE_TEST
+	select SERIAL_CORE
+	help
+	  This driver is for Actions Semiconductor S500/S900 SoC's UART.
+	  Say 'Y' here if you wish to use the on-board serial port.
+	  Otherwise, say 'N'.
+
+config SERIAL_OWL_CONSOLE
+	bool "Console on Actions Semi Owl serial port"
+	depends on SERIAL_OWL=y
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
+	default y
+	help
+	  Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
+	  as the system console. Only earlycon is implemented currently.
+
 endmenu
 
 config SERIAL_MCTRL_GPIO
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 53c03e005132..fe88a75d9a59 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -92,6 +92,7 @@ obj-$(CONFIG_SERIAL_STM32)	+= stm32-usart.o
 obj-$(CONFIG_SERIAL_MVEBU_UART)	+= mvebu-uart.o
 obj-$(CONFIG_SERIAL_PIC32)	+= pic32_uart.o
 obj-$(CONFIG_SERIAL_MPS2_UART)	+= mps2-uart.o
+obj-$(CONFIG_SERIAL_OWL)	+= owl-uart.o
 
 # GPIOLIB helpers for modem control lines
 obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index f2f251075109..24180adb1cbb 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -697,6 +697,7 @@ static struct console amba_console = {
 #define AMBA_CONSOLE	NULL
 #endif
 
+static DEFINE_MUTEX(amba_reg_lock);
 static struct uart_driver amba_reg = {
 	.owner			= THIS_MODULE,
 	.driver_name		= "ttyAM",
@@ -749,6 +750,19 @@ static int pl010_probe(struct amba_device *dev, const struct amba_id *id)
 	amba_ports[i] = uap;
 
 	amba_set_drvdata(dev, uap);
+
+	mutex_lock(&amba_reg_lock);
+	if (!amba_reg.state) {
+		ret = uart_register_driver(&amba_reg);
+		if (ret < 0) {
+			mutex_unlock(&amba_reg_lock);
+			dev_err(uap->port.dev,
+				"Failed to register AMBA-PL010 driver\n");
+			return ret;
+		}
+	}
+	mutex_unlock(&amba_reg_lock);
+
 	ret = uart_add_one_port(&amba_reg, &uap->port);
 	if (ret)
 		amba_ports[i] = NULL;
@@ -760,12 +774,18 @@ static int pl010_remove(struct amba_device *dev)
 {
 	struct uart_amba_port *uap = amba_get_drvdata(dev);
 	int i;
+	bool busy = false;
 
 	uart_remove_one_port(&amba_reg, &uap->port);
 
 	for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
 		if (amba_ports[i] == uap)
 			amba_ports[i] = NULL;
+		else if (amba_ports[i])
+			busy = true;
+
+	if (!busy)
+		uart_unregister_driver(&amba_reg);
 
 	return 0;
 }
@@ -816,23 +836,14 @@ static struct amba_driver pl010_driver = {
 
 static int __init pl010_init(void)
 {
-	int ret;
-
 	printk(KERN_INFO "Serial: AMBA driver\n");
 
-	ret = uart_register_driver(&amba_reg);
-	if (ret == 0) {
-		ret = amba_driver_register(&pl010_driver);
-		if (ret)
-			uart_unregister_driver(&amba_reg);
-	}
-	return ret;
+	return  amba_driver_register(&pl010_driver);
 }
 
 static void __exit pl010_exit(void)
 {
 	amba_driver_unregister(&pl010_driver);
-	uart_unregister_driver(&amba_reg);
 }
 
 module_init(pl010_init);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index c355ac9abafc..7551cab438ff 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1,5 +1,5 @@
 /*
- *  Driver for Atmel AT91 / AT32 Serial ports
+ *  Driver for Atmel AT91 Serial ports
  *  Copyright (C) 2003 Rick Bronson
  *
  *  Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
@@ -46,6 +46,7 @@
 #include <linux/err.h>
 #include <linux/irq.h>
 #include <linux/suspend.h>
+#include <linux/mm.h>
 
 #include <asm/io.h>
 #include <asm/ioctls.h>
@@ -118,7 +119,6 @@ struct atmel_uart_char {
 
 /*
  * at91: 6 USARTs and one DBGU port (SAM9260)
- * avr32: 4
  * samx7: 3 USARTs and 5 UARTs
  */
 #define ATMEL_MAX_UART		8
@@ -228,21 +228,6 @@ static inline void atmel_uart_writel(struct uart_port *port, u32 reg, u32 value)
 	__raw_writel(value, port->membase + reg);
 }
 
-#ifdef CONFIG_AVR32
-
-/* AVR32 cannot handle 8 or 16bit I/O accesses but only 32bit I/O accesses */
-static inline u8 atmel_uart_read_char(struct uart_port *port)
-{
-	return __raw_readl(port->membase + ATMEL_US_RHR);
-}
-
-static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
-{
-	__raw_writel(value, port->membase + ATMEL_US_THR);
-}
-
-#else
-
 static inline u8 atmel_uart_read_char(struct uart_port *port)
 {
 	return __raw_readb(port->membase + ATMEL_US_RHR);
@@ -253,8 +238,6 @@ static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
 	__raw_writeb(value, port->membase + ATMEL_US_THR);
 }
 
-#endif
-
 #ifdef CONFIG_SERIAL_ATMEL_PDC
 static bool atmel_use_pdc_rx(struct uart_port *port)
 {
@@ -959,7 +942,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
 	sg_set_page(&atmel_port->sg_tx,
 			virt_to_page(port->state->xmit.buf),
 			UART_XMIT_SIZE,
-			(unsigned long)port->state->xmit.buf & ~PAGE_MASK);
+			offset_in_page(port->state->xmit.buf));
 	nent = dma_map_sg(port->dev,
 				&atmel_port->sg_tx,
 				1,
@@ -1141,7 +1124,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 	sg_set_page(&atmel_port->sg_rx,
 		    virt_to_page(ring->buf),
 		    sizeof(struct atmel_uart_char) * ATMEL_SERIAL_RINGSIZE,
-		    (unsigned long)ring->buf & ~PAGE_MASK);
+		    offset_in_page(ring->buf));
 	nent = dma_map_sg(port->dev,
 			  &atmel_port->sg_rx,
 			  1,
@@ -1655,72 +1638,56 @@ static void atmel_init_property(struct atmel_uart_port *atmel_port,
 				struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
-
-	if (np) {
-		/* DMA/PDC usage specification */
-		if (of_property_read_bool(np, "atmel,use-dma-rx")) {
-			if (of_property_read_bool(np, "dmas")) {
-				atmel_port->use_dma_rx  = true;
-				atmel_port->use_pdc_rx  = false;
-			} else {
-				atmel_port->use_dma_rx  = false;
-				atmel_port->use_pdc_rx  = true;
-			}
+
+	/* DMA/PDC usage specification */
+	if (of_property_read_bool(np, "atmel,use-dma-rx")) {
+		if (of_property_read_bool(np, "dmas")) {
+			atmel_port->use_dma_rx  = true;
+			atmel_port->use_pdc_rx  = false;
 		} else {
 			atmel_port->use_dma_rx  = false;
-			atmel_port->use_pdc_rx  = false;
+			atmel_port->use_pdc_rx  = true;
 		}
+	} else {
+		atmel_port->use_dma_rx  = false;
+		atmel_port->use_pdc_rx  = false;
+	}
 
-		if (of_property_read_bool(np, "atmel,use-dma-tx")) {
-			if (of_property_read_bool(np, "dmas")) {
-				atmel_port->use_dma_tx  = true;
-				atmel_port->use_pdc_tx  = false;
-			} else {
-				atmel_port->use_dma_tx  = false;
-				atmel_port->use_pdc_tx  = true;
-			}
+	if (of_property_read_bool(np, "atmel,use-dma-tx")) {
+		if (of_property_read_bool(np, "dmas")) {
+			atmel_port->use_dma_tx  = true;
+			atmel_port->use_pdc_tx  = false;
 		} else {
 			atmel_port->use_dma_tx  = false;
-			atmel_port->use_pdc_tx  = false;
+			atmel_port->use_pdc_tx  = true;
 		}
-
 	} else {
-		atmel_port->use_pdc_rx  = pdata->use_dma_rx;
-		atmel_port->use_pdc_tx  = pdata->use_dma_tx;
-		atmel_port->use_dma_rx  = false;
 		atmel_port->use_dma_tx  = false;
+		atmel_port->use_pdc_tx  = false;
 	}
-
 }
 
 static void atmel_init_rs485(struct uart_port *port,
 				struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
-
-	if (np) {
-		struct serial_rs485 *rs485conf = &port->rs485;
-		u32 rs485_delay[2];
-		/* rs485 properties */
-		if (of_property_read_u32_array(np, "rs485-rts-delay",
-					rs485_delay, 2) == 0) {
-			rs485conf->delay_rts_before_send = rs485_delay[0];
-			rs485conf->delay_rts_after_send = rs485_delay[1];
-			rs485conf->flags = 0;
-		}
 
-		if (of_get_property(np, "rs485-rx-during-tx", NULL))
-			rs485conf->flags |= SER_RS485_RX_DURING_TX;
+	struct serial_rs485 *rs485conf = &port->rs485;
+	u32 rs485_delay[2];
 
-		if (of_get_property(np, "linux,rs485-enabled-at-boot-time",
-								NULL))
-			rs485conf->flags |= SER_RS485_ENABLED;
-	} else {
-		port->rs485       = pdata->rs485;
+	/* rs485 properties */
+	if (of_property_read_u32_array(np, "rs485-rts-delay",
+				       rs485_delay, 2) == 0) {
+		rs485conf->delay_rts_before_send = rs485_delay[0];
+		rs485conf->delay_rts_after_send = rs485_delay[1];
+		rs485conf->flags = 0;
 	}
 
+	if (of_get_property(np, "rs485-rx-during-tx", NULL))
+		rs485conf->flags |= SER_RS485_RX_DURING_TX;
+
+	if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL))
+		rs485conf->flags |= SER_RS485_ENABLED;
 }
 
 static void atmel_set_ops(struct uart_port *port)
@@ -2402,7 +2369,6 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
 {
 	int ret;
 	struct uart_port *port = &atmel_port->uart;
-	struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
 
 	atmel_init_property(atmel_port, pdev);
 	atmel_set_ops(port);
@@ -2410,24 +2376,17 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
 	atmel_init_rs485(port, pdev);
 
 	port->iotype		= UPIO_MEM;
-	port->flags		= UPF_BOOT_AUTOCONF;
+	port->flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP;
 	port->ops		= &atmel_pops;
 	port->fifosize		= 1;
 	port->dev		= &pdev->dev;
 	port->mapbase	= pdev->resource[0].start;
 	port->irq	= pdev->resource[1].start;
 	port->rs485_config	= atmel_config_rs485;
+	port->membase	= NULL;
 
 	memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
 
-	if (pdata && pdata->regs) {
-		/* Already mapped by setup code */
-		port->membase = pdata->regs;
-	} else {
-		port->flags	|= UPF_IOREMAP;
-		port->membase	= NULL;
-	}
-
 	/* for console, the clock could already be configured */
 	if (!atmel_port->clk) {
 		atmel_port->clk = clk_get(&pdev->dev, "usart");
@@ -2460,8 +2419,6 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
 	return 0;
 }
 
-struct platform_device *atmel_default_console_device;	/* the serial console device */
-
 #ifdef CONFIG_SERIAL_ATMEL_CONSOLE
 static void atmel_console_putchar(struct uart_port *port, int ch)
 {
@@ -2594,47 +2551,6 @@ static struct console atmel_console = {
 
 #define ATMEL_CONSOLE_DEVICE	(&atmel_console)
 
-/*
- * Early console initialization (before VM subsystem initialized).
- */
-static int __init atmel_console_init(void)
-{
-	int ret;
-	if (atmel_default_console_device) {
-		struct atmel_uart_data *pdata =
-			dev_get_platdata(&atmel_default_console_device->dev);
-		int id = pdata->num;
-		struct atmel_uart_port *atmel_port = &atmel_ports[id];
-
-		atmel_port->backup_imr = 0;
-		atmel_port->uart.line = id;
-
-		add_preferred_console(ATMEL_DEVICENAME, id, NULL);
-		ret = atmel_init_port(atmel_port, atmel_default_console_device);
-		if (ret)
-			return ret;
-		register_console(&atmel_console);
-	}
-
-	return 0;
-}
-
-console_initcall(atmel_console_init);
-
-/*
- * Late console initialization.
- */
-static int __init atmel_late_console_init(void)
-{
-	if (atmel_default_console_device
-	    && !(atmel_console.flags & CON_ENABLED))
-		register_console(&atmel_console);
-
-	return 0;
-}
-
-core_initcall(atmel_late_console_init);
-
 static inline bool atmel_is_console_port(struct uart_port *port)
 {
 	return port->cons && port->cons->index == port->line;
@@ -2804,19 +2720,13 @@ static int atmel_serial_probe(struct platform_device *pdev)
 {
 	struct atmel_uart_port *atmel_port;
 	struct device_node *np = pdev->dev.of_node;
-	struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
 	void *data;
 	int ret = -ENODEV;
 	bool rs485_enabled;
 
 	BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
 
-	if (np)
-		ret = of_alias_get_id(np, "serial");
-	else
-		if (pdata)
-			ret = pdata->num;
-
+	ret = of_alias_get_id(np, "serial");
 	if (ret < 0)
 		/* port id not found in platform data nor device-tree aliases:
 		 * auto-enumerate it */
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 15df1ba78095..343de8c384b0 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -140,6 +140,8 @@
 #define UARTBAUD_SBNS		0x00002000
 #define UARTBAUD_SBR		0x00000000
 #define UARTBAUD_SBR_MASK	0x1fff
+#define UARTBAUD_OSR_MASK       0x1f
+#define UARTBAUD_OSR_SHIFT      24
 
 #define UARTSTAT_LBKDIF		0x80000000
 #define UARTSTAT_RXEDGIF	0x40000000
@@ -231,12 +233,14 @@
 #define DEV_NAME	"ttyLP"
 #define UART_NR		6
 
+/* IMX lpuart has four extra unused regs located at the beginning */
+#define IMX_REG_OFF	0x10
+
 struct lpuart_port {
 	struct uart_port	port;
 	struct clk		*clk;
 	unsigned int		txfifo_size;
 	unsigned int		rxfifo_size;
-	bool			lpuart32;
 
 	bool			lpuart_dma_tx_use;
 	bool			lpuart_dma_rx_use;
@@ -258,13 +262,28 @@ struct lpuart_port {
 	wait_queue_head_t	dma_wait;
 };
 
+struct lpuart_soc_data {
+	char	iotype;
+	u8	reg_off;
+};
+
+static const struct lpuart_soc_data vf_data = {
+	.iotype = UPIO_MEM,
+};
+
+static const struct lpuart_soc_data ls_data = {
+	.iotype = UPIO_MEM32BE,
+};
+
+static struct lpuart_soc_data imx_data = {
+	.iotype = UPIO_MEM32,
+	.reg_off = IMX_REG_OFF,
+};
+
 static const struct of_device_id lpuart_dt_ids[] = {
-	{
-		.compatible = "fsl,vf610-lpuart",
-	},
-	{
-		.compatible = "fsl,ls1021a-lpuart",
-	},
+	{ .compatible = "fsl,vf610-lpuart",	.data = &vf_data, },
+	{ .compatible = "fsl,ls1021a-lpuart",	.data = &ls_data, },
+	{ .compatible = "fsl,imx7ulp-lpuart",	.data = &imx_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
@@ -272,14 +291,29 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
 /* Forward declare this for the dma callbacks*/
 static void lpuart_dma_tx_complete(void *arg);
 
-static u32 lpuart32_read(void __iomem *addr)
+static inline u32 lpuart32_read(struct uart_port *port, u32 off)
 {
-	return ioread32be(addr);
+	switch (port->iotype) {
+	case UPIO_MEM32:
+		return readl(port->membase + off);
+	case UPIO_MEM32BE:
+		return ioread32be(port->membase + off);
+	default:
+		return 0;
+	}
 }
 
-static void lpuart32_write(u32 val, void __iomem *addr)
+static inline void lpuart32_write(struct uart_port *port, u32 val,
+				  u32 off)
 {
-	iowrite32be(val, addr);
+	switch (port->iotype) {
+	case UPIO_MEM32:
+		writel(val, port->membase + off);
+		break;
+	case UPIO_MEM32BE:
+		iowrite32be(val, port->membase + off);
+		break;
+	}
 }
 
 static void lpuart_stop_tx(struct uart_port *port)
@@ -295,9 +329,9 @@ static void lpuart32_stop_tx(struct uart_port *port)
 {
 	unsigned long temp;
 
-	temp = lpuart32_read(port->membase + UARTCTRL);
+	temp = lpuart32_read(port, UARTCTRL);
 	temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE);
-	lpuart32_write(temp, port->membase + UARTCTRL);
+	lpuart32_write(port, temp, UARTCTRL);
 }
 
 static void lpuart_stop_rx(struct uart_port *port)
@@ -312,8 +346,8 @@ static void lpuart32_stop_rx(struct uart_port *port)
 {
 	unsigned long temp;
 
-	temp = lpuart32_read(port->membase + UARTCTRL);
-	lpuart32_write(temp & ~UARTCTRL_RE, port->membase + UARTCTRL);
+	temp = lpuart32_read(port, UARTCTRL);
+	lpuart32_write(port, temp & ~UARTCTRL_RE, UARTCTRL);
 }
 
 static void lpuart_dma_tx(struct lpuart_port *sport)
@@ -512,14 +546,14 @@ static inline void lpuart32_transmit_buffer(struct lpuart_port *sport)
 	struct circ_buf *xmit = &sport->port.state->xmit;
 	unsigned long txcnt;
 
-	txcnt = lpuart32_read(sport->port.membase + UARTWATER);
+	txcnt = lpuart32_read(&sport->port, UARTWATER);
 	txcnt = txcnt >> UARTWATER_TXCNT_OFF;
 	txcnt &= UARTWATER_COUNT_MASK;
 	while (!uart_circ_empty(xmit) && (txcnt < sport->txfifo_size)) {
-		lpuart32_write(xmit->buf[xmit->tail], sport->port.membase + UARTDATA);
+		lpuart32_write(&sport->port, xmit->buf[xmit->tail], UARTDATA);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		sport->port.icount.tx++;
-		txcnt = lpuart32_read(sport->port.membase + UARTWATER);
+		txcnt = lpuart32_read(&sport->port, UARTWATER);
 		txcnt = txcnt >> UARTWATER_TXCNT_OFF;
 		txcnt &= UARTWATER_COUNT_MASK;
 	}
@@ -555,10 +589,10 @@ static void lpuart32_start_tx(struct uart_port *port)
 	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
 	unsigned long temp;
 
-	temp = lpuart32_read(port->membase + UARTCTRL);
-	lpuart32_write(temp | UARTCTRL_TIE, port->membase + UARTCTRL);
+	temp = lpuart32_read(port, UARTCTRL);
+	lpuart32_write(port, temp | UARTCTRL_TIE, UARTCTRL);
 
-	if (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE)
+	if (lpuart32_read(port, UARTSTAT) & UARTSTAT_TDRE)
 		lpuart32_transmit_buffer(sport);
 }
 
@@ -581,7 +615,7 @@ static unsigned int lpuart_tx_empty(struct uart_port *port)
 
 static unsigned int lpuart32_tx_empty(struct uart_port *port)
 {
-	return (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TC) ?
+	return (lpuart32_read(port, UARTSTAT) & UARTSTAT_TC) ?
 		TIOCSER_TEMT : 0;
 }
 
@@ -593,22 +627,22 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id)
 
 	spin_lock_irqsave(&sport->port.lock, flags);
 	if (sport->port.x_char) {
-		if (sport->lpuart32)
-			lpuart32_write(sport->port.x_char, sport->port.membase + UARTDATA);
+		if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+			lpuart32_write(&sport->port, sport->port.x_char, UARTDATA);
 		else
 			writeb(sport->port.x_char, sport->port.membase + UARTDR);
 		goto out;
 	}
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
-		if (sport->lpuart32)
+		if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
 			lpuart32_stop_tx(&sport->port);
 		else
 			lpuart_stop_tx(&sport->port);
 		goto out;
 	}
 
-	if (sport->lpuart32)
+	if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
 		lpuart32_transmit_buffer(sport);
 	else
 		lpuart_transmit_buffer(sport);
@@ -694,15 +728,15 @@ static irqreturn_t lpuart32_rxint(int irq, void *dev_id)
 
 	spin_lock_irqsave(&sport->port.lock, flags);
 
-	while (!(lpuart32_read(sport->port.membase + UARTFIFO) & UARTFIFO_RXEMPT)) {
+	while (!(lpuart32_read(&sport->port, UARTFIFO) & UARTFIFO_RXEMPT)) {
 		flg = TTY_NORMAL;
 		sport->port.icount.rx++;
 		/*
 		 * to clear the FE, OR, NF, FE, PE flags,
 		 * read STAT then read DATA reg
 		 */
-		sr = lpuart32_read(sport->port.membase + UARTSTAT);
-		rx = lpuart32_read(sport->port.membase + UARTDATA);
+		sr = lpuart32_read(&sport->port, UARTSTAT);
+		rx = lpuart32_read(&sport->port, UARTDATA);
 		rx &= 0x3ff;
 
 		if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
@@ -769,18 +803,18 @@ static irqreturn_t lpuart32_int(int irq, void *dev_id)
 	struct lpuart_port *sport = dev_id;
 	unsigned long sts, rxcount;
 
-	sts = lpuart32_read(sport->port.membase + UARTSTAT);
-	rxcount = lpuart32_read(sport->port.membase + UARTWATER);
+	sts = lpuart32_read(&sport->port, UARTSTAT);
+	rxcount = lpuart32_read(&sport->port, UARTWATER);
 	rxcount = rxcount >> UARTWATER_RXCNT_OFF;
 
 	if (sts & UARTSTAT_RDRF || rxcount > 0)
 		lpuart32_rxint(irq, dev_id);
 
 	if ((sts & UARTSTAT_TDRE) &&
-		!(lpuart32_read(sport->port.membase + UARTBAUD) & UARTBAUD_TDMAE))
+		!(lpuart32_read(&sport->port, UARTBAUD) & UARTBAUD_TDMAE))
 		lpuart_txint(irq, dev_id);
 
-	lpuart32_write(sts, sport->port.membase + UARTSTAT);
+	lpuart32_write(&sport->port, sts, UARTSTAT);
 	return IRQ_HANDLED;
 }
 
@@ -1041,7 +1075,7 @@ static unsigned int lpuart32_get_mctrl(struct uart_port *port)
 	unsigned int temp = 0;
 	unsigned long reg;
 
-	reg = lpuart32_read(port->membase + UARTMODIR);
+	reg = lpuart32_read(port, UARTMODIR);
 	if (reg & UARTMODIR_TXCTSE)
 		temp |= TIOCM_CTS;
 
@@ -1076,7 +1110,7 @@ static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	unsigned long temp;
 
-	temp = lpuart32_read(port->membase + UARTMODIR) &
+	temp = lpuart32_read(port, UARTMODIR) &
 			~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
 
 	if (mctrl & TIOCM_RTS)
@@ -1085,7 +1119,7 @@ static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	if (mctrl & TIOCM_CTS)
 		temp |= UARTMODIR_TXCTSE;
 
-	lpuart32_write(temp, port->membase + UARTMODIR);
+	lpuart32_write(port, temp, UARTMODIR);
 }
 
 static void lpuart_break_ctl(struct uart_port *port, int break_state)
@@ -1104,12 +1138,12 @@ static void lpuart32_break_ctl(struct uart_port *port, int break_state)
 {
 	unsigned long temp;
 
-	temp = lpuart32_read(port->membase + UARTCTRL) & ~UARTCTRL_SBK;
+	temp = lpuart32_read(port, UARTCTRL) & ~UARTCTRL_SBK;
 
 	if (break_state != 0)
 		temp |= UARTCTRL_SBK;
 
-	lpuart32_write(temp, port->membase + UARTCTRL);
+	lpuart32_write(port, temp, UARTCTRL);
 }
 
 static void lpuart_setup_watermark(struct lpuart_port *sport)
@@ -1149,24 +1183,24 @@ static void lpuart32_setup_watermark(struct lpuart_port *sport)
 	unsigned long val, ctrl;
 	unsigned long ctrl_saved;
 
-	ctrl = lpuart32_read(sport->port.membase + UARTCTRL);
+	ctrl = lpuart32_read(&sport->port, UARTCTRL);
 	ctrl_saved = ctrl;
 	ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE |
 			UARTCTRL_RIE | UARTCTRL_RE);
-	lpuart32_write(ctrl, sport->port.membase + UARTCTRL);
+	lpuart32_write(&sport->port, ctrl, UARTCTRL);
 
 	/* enable FIFO mode */
-	val = lpuart32_read(sport->port.membase + UARTFIFO);
+	val = lpuart32_read(&sport->port, UARTFIFO);
 	val |= UARTFIFO_TXFE | UARTFIFO_RXFE;
 	val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH;
-	lpuart32_write(val, sport->port.membase + UARTFIFO);
+	lpuart32_write(&sport->port, val, UARTFIFO);
 
 	/* set the watermark */
 	val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF);
-	lpuart32_write(val, sport->port.membase + UARTWATER);
+	lpuart32_write(&sport->port, val, UARTWATER);
 
 	/* Restore cr2 */
-	lpuart32_write(ctrl_saved, sport->port.membase + UARTCTRL);
+	lpuart32_write(&sport->port, ctrl_saved, UARTCTRL);
 }
 
 static void rx_dma_timer_init(struct lpuart_port *sport)
@@ -1242,7 +1276,7 @@ static int lpuart32_startup(struct uart_port *port)
 	unsigned long temp;
 
 	/* determine FIFO size */
-	temp = lpuart32_read(sport->port.membase + UARTFIFO);
+	temp = lpuart32_read(&sport->port, UARTFIFO);
 
 	sport->txfifo_size = 0x1 << (((temp >> UARTFIFO_TXSIZE_OFF) &
 		UARTFIFO_FIFOSIZE_MASK) - 1);
@@ -1259,10 +1293,10 @@ static int lpuart32_startup(struct uart_port *port)
 
 	lpuart32_setup_watermark(sport);
 
-	temp = lpuart32_read(sport->port.membase + UARTCTRL);
+	temp = lpuart32_read(&sport->port, UARTCTRL);
 	temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | UARTCTRL_TE);
 	temp |= UARTCTRL_ILIE;
-	lpuart32_write(temp, sport->port.membase + UARTCTRL);
+	lpuart32_write(&sport->port, temp, UARTCTRL);
 
 	spin_unlock_irqrestore(&sport->port.lock, flags);
 	return 0;
@@ -1311,10 +1345,10 @@ static void lpuart32_shutdown(struct uart_port *port)
 	spin_lock_irqsave(&port->lock, flags);
 
 	/* disable Rx/Tx and interrupts */
-	temp = lpuart32_read(port->membase + UARTCTRL);
+	temp = lpuart32_read(port, UARTCTRL);
 	temp &= ~(UARTCTRL_TE | UARTCTRL_RE |
 			UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
-	lpuart32_write(temp, port->membase + UARTCTRL);
+	lpuart32_write(port, temp, UARTCTRL);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 
@@ -1479,6 +1513,75 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
 }
 
 static void
+lpuart32_serial_setbrg(struct lpuart_port *sport, unsigned int baudrate)
+{
+	u32 sbr, osr, baud_diff, tmp_osr, tmp_sbr, tmp_diff, tmp;
+	u32 clk = sport->port.uartclk;
+
+	/*
+	 * The idea is to use the best OSR (over-sampling rate) possible.
+	 * Note, OSR is typically hard-set to 16 in other LPUART instantiations.
+	 * Loop to find the best OSR value possible, one that generates minimum
+	 * baud_diff iterate through the rest of the supported values of OSR.
+	 *
+	 * Calculation Formula:
+	 *  Baud Rate = baud clock / ((OSR+1) × SBR)
+	 */
+	baud_diff = baudrate;
+	osr = 0;
+	sbr = 0;
+
+	for (tmp_osr = 4; tmp_osr <= 32; tmp_osr++) {
+		/* calculate the temporary sbr value  */
+		tmp_sbr = (clk / (baudrate * tmp_osr));
+		if (tmp_sbr == 0)
+			tmp_sbr = 1;
+
+		/*
+		 * calculate the baud rate difference based on the temporary
+		 * osr and sbr values
+		 */
+		tmp_diff = clk / (tmp_osr * tmp_sbr) - baudrate;
+
+		/* select best values between sbr and sbr+1 */
+		tmp = clk / (tmp_osr * (tmp_sbr + 1));
+		if (tmp_diff > (baudrate - tmp)) {
+			tmp_diff = baudrate - tmp;
+			tmp_sbr++;
+		}
+
+		if (tmp_diff <= baud_diff) {
+			baud_diff = tmp_diff;
+			osr = tmp_osr;
+			sbr = tmp_sbr;
+
+			if (!baud_diff)
+				break;
+		}
+	}
+
+	/* handle buadrate outside acceptable rate */
+	if (baud_diff > ((baudrate / 100) * 3))
+		dev_warn(sport->port.dev,
+			 "unacceptable baud rate difference of more than 3%%\n");
+
+	tmp = lpuart32_read(&sport->port, UARTBAUD);
+
+	if ((osr > 3) && (osr < 8))
+		tmp |= UARTBAUD_BOTHEDGE;
+
+	tmp &= ~(UARTBAUD_OSR_MASK << UARTBAUD_OSR_SHIFT);
+	tmp |= (((osr-1) & UARTBAUD_OSR_MASK) << UARTBAUD_OSR_SHIFT);
+
+	tmp &= ~UARTBAUD_SBR_MASK;
+	tmp |= sbr & UARTBAUD_SBR_MASK;
+
+	tmp &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
+
+	lpuart32_write(&sport->port, tmp, UARTBAUD);
+}
+
+static void
 lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 		   struct ktermios *old)
 {
@@ -1487,11 +1590,10 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned long ctrl, old_ctrl, bd, modem;
 	unsigned int  baud;
 	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
-	unsigned int sbr;
 
-	ctrl = old_ctrl = lpuart32_read(sport->port.membase + UARTCTRL);
-	bd = lpuart32_read(sport->port.membase + UARTBAUD);
-	modem = lpuart32_read(sport->port.membase + UARTMODIR);
+	ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL);
+	bd = lpuart32_read(&sport->port, UARTBAUD);
+	modem = lpuart32_read(&sport->port, UARTMODIR);
 	/*
 	 * only support CS8 and CS7, and for CS7 must enable PE.
 	 * supported mode:
@@ -1577,21 +1679,16 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	uart_update_timeout(port, termios->c_cflag, baud);
 
 	/* wait transmit engin complete */
-	while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC))
+	while (!(lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_TC))
 		barrier();
 
 	/* disable transmit and receive */
-	lpuart32_write(old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
-			sport->port.membase + UARTCTRL);
+	lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
+		       UARTCTRL);
 
-	sbr = sport->port.uartclk / (16 * baud);
-	bd &= ~UARTBAUD_SBR_MASK;
-	bd |= sbr & UARTBAUD_SBR_MASK;
-	bd |= UARTBAUD_BOTHEDGE;
-	bd &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
-	lpuart32_write(bd, sport->port.membase + UARTBAUD);
-	lpuart32_write(modem, sport->port.membase + UARTMODIR);
-	lpuart32_write(ctrl, sport->port.membase + UARTCTRL);
+	lpuart32_serial_setbrg(sport, baud);
+	lpuart32_write(&sport->port, modem, UARTMODIR);
+	lpuart32_write(&sport->port, ctrl, UARTCTRL);
 	/* restore control register */
 
 	spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -1694,10 +1791,10 @@ static void lpuart_console_putchar(struct uart_port *port, int ch)
 
 static void lpuart32_console_putchar(struct uart_port *port, int ch)
 {
-	while (!(lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE))
+	while (!(lpuart32_read(port, UARTSTAT) & UARTSTAT_TDRE))
 		barrier();
 
-	lpuart32_write(ch, port->membase + UARTDATA);
+	lpuart32_write(port, ch, UARTDATA);
 }
 
 static void
@@ -1745,18 +1842,18 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count)
 		spin_lock_irqsave(&sport->port.lock, flags);
 
 	/* first save CR2 and then disable interrupts */
-	cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL);
+	cr = old_cr = lpuart32_read(&sport->port, UARTCTRL);
 	cr |= (UARTCTRL_TE |  UARTCTRL_RE);
 	cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
-	lpuart32_write(cr, sport->port.membase + UARTCTRL);
+	lpuart32_write(&sport->port, cr, UARTCTRL);
 
 	uart_console_write(&sport->port, s, count, lpuart32_console_putchar);
 
 	/* wait for transmitter finish complete and restore CR2 */
-	while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC))
+	while (!(lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_TC))
 		barrier();
 
-	lpuart32_write(old_cr, sport->port.membase + UARTCTRL);
+	lpuart32_write(&sport->port, old_cr, UARTCTRL);
 
 	if (locked)
 		spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -1822,14 +1919,14 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud,
 	unsigned long cr, bd;
 	unsigned int sbr, uartclk, baud_raw;
 
-	cr = lpuart32_read(sport->port.membase + UARTCTRL);
+	cr = lpuart32_read(&sport->port, UARTCTRL);
 	cr &= UARTCTRL_TE | UARTCTRL_RE;
 	if (!cr)
 		return;
 
 	/* ok, the port was enabled */
 
-	cr = lpuart32_read(sport->port.membase + UARTCTRL);
+	cr = lpuart32_read(&sport->port, UARTCTRL);
 
 	*parity = 'n';
 	if (cr & UARTCTRL_PE) {
@@ -1844,7 +1941,7 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud,
 	else
 		*bits = 8;
 
-	bd = lpuart32_read(sport->port.membase + UARTBAUD);
+	bd = lpuart32_read(&sport->port, UARTBAUD);
 	bd &= UARTBAUD_SBR_MASK;
 	sbr = bd;
 	uartclk = clk_get_rate(sport->clk);
@@ -1881,12 +1978,12 @@ static int __init lpuart_console_setup(struct console *co, char *options)
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 	else
-		if (sport->lpuart32)
+		if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
 			lpuart32_console_get_options(sport, &baud, &parity, &bits);
 		else
 			lpuart_console_get_options(sport, &baud, &parity, &bits);
 
-	if (sport->lpuart32)
+	if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
 		lpuart32_setup_watermark(sport);
 	else
 		lpuart_setup_watermark(sport);
@@ -1945,12 +2042,26 @@ static int __init lpuart32_early_console_setup(struct earlycon_device *device,
 	if (!device->port.membase)
 		return -ENODEV;
 
+	device->port.iotype = UPIO_MEM32BE;
 	device->con->write = lpuart32_early_write;
 	return 0;
 }
 
+static int __init lpuart32_imx_early_console_setup(struct earlycon_device *device,
+						   const char *opt)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->port.iotype = UPIO_MEM32;
+	device->port.membase += IMX_REG_OFF;
+	device->con->write = lpuart32_early_write;
+
+	return 0;
+}
 OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup);
 OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup);
+OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup);
 EARLYCON_DECLARE(lpuart, lpuart_early_console_setup);
 EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup);
 
@@ -1971,6 +2082,9 @@ static struct uart_driver lpuart_reg = {
 
 static int lpuart_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *of_id = of_match_device(lpuart_dt_ids,
+							   &pdev->dev);
+	const struct lpuart_soc_data *sdata = of_id->data;
 	struct device_node *np = pdev->dev.of_node;
 	struct lpuart_port *sport;
 	struct resource *res;
@@ -1988,25 +2102,23 @@ static int lpuart_probe(struct platform_device *pdev)
 		return ret;
 	}
 	sport->port.line = ret;
-	sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart");
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	sport->port.membase = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(sport->port.membase))
 		return PTR_ERR(sport->port.membase);
 
+	sport->port.membase += sdata->reg_off;
 	sport->port.mapbase = res->start;
 	sport->port.dev = &pdev->dev;
 	sport->port.type = PORT_LPUART;
-	sport->port.iotype = UPIO_MEM;
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "cannot obtain irq\n");
 		return ret;
 	}
 	sport->port.irq = ret;
-
-	if (sport->lpuart32)
+	sport->port.iotype = sdata->iotype;
+	if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
 		sport->port.ops = &lpuart32_pops;
 	else
 		sport->port.ops = &lpuart_pops;
@@ -2033,7 +2145,7 @@ static int lpuart_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, &sport->port);
 
-	if (sport->lpuart32)
+	if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
 		lpuart_reg.cons = LPUART32_CONSOLE;
 	else
 		lpuart_reg.cons = LPUART_CONSOLE;
@@ -2086,11 +2198,11 @@ static int lpuart_suspend(struct device *dev)
 	struct lpuart_port *sport = dev_get_drvdata(dev);
 	unsigned long temp;
 
-	if (sport->lpuart32) {
+	if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) {
 		/* disable Rx/Tx and interrupts */
-		temp = lpuart32_read(sport->port.membase + UARTCTRL);
+		temp = lpuart32_read(&sport->port, UARTCTRL);
 		temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE);
-		lpuart32_write(temp, sport->port.membase + UARTCTRL);
+		lpuart32_write(&sport->port, temp, UARTCTRL);
 	} else {
 		/* disable Rx/Tx and interrupts */
 		temp = readb(sport->port.membase + UARTCR2);
@@ -2137,12 +2249,12 @@ static int lpuart_resume(struct device *dev)
 	if (sport->port.suspended && !sport->port.irq_wake)
 		clk_prepare_enable(sport->clk);
 
-	if (sport->lpuart32) {
+	if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) {
 		lpuart32_setup_watermark(sport);
-		temp = lpuart32_read(sport->port.membase + UARTCTRL);
+		temp = lpuart32_read(&sport->port, UARTCTRL);
 		temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE |
 			 UARTCTRL_TE | UARTCTRL_ILIE);
-		lpuart32_write(temp, sport->port.membase + UARTCTRL);
+		lpuart32_write(&sport->port, temp, UARTCTRL);
 	} else {
 		lpuart_setup_watermark(sport);
 		temp = readb(sport->port.membase + UARTCR2);
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index bbefddd92bfe..9e3162bf3bd1 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -186,6 +186,11 @@
 
 #define UART_NR 8
 
+/* RX DMA buffer periods */
+#define RX_DMA_PERIODS 4
+#define RX_BUF_SIZE	(PAGE_SIZE)
+
+
 /* i.MX21 type uart runs on all i.mx except i.MX1 and i.MX6q */
 enum imx_uart_type {
 	IMX1_UART,
@@ -207,9 +212,6 @@ struct imx_port {
 	unsigned int		have_rtscts:1;
 	unsigned int		have_rtsgpio:1;
 	unsigned int		dte_mode:1;
-	unsigned int		irda_inv_rx:1;
-	unsigned int		irda_inv_tx:1;
-	unsigned short		trcv_delay; /* transceiver delay */
 	struct clk		*clk_ipg;
 	struct clk		*clk_per;
 	const struct imx_uart_data *devdata;
@@ -224,6 +226,7 @@ struct imx_port {
 	struct dma_chan		*dma_chan_rx, *dma_chan_tx;
 	struct scatterlist	rx_sgl, tx_sgl[2];
 	void			*rx_buf;
+	unsigned int		rx_buf_size;
 	struct circ_buf		rx_ring;
 	unsigned int		rx_periods;
 	dma_cookie_t		rx_cookie;
@@ -964,8 +967,6 @@ static void imx_timeout(unsigned long data)
 	}
 }
 
-#define RX_BUF_SIZE	(PAGE_SIZE)
-
 /*
  * There are two kinds of RX DMA interrupts(such as in the MX6Q):
  *   [1] the RX DMA buffer is full.
@@ -1048,9 +1049,6 @@ static void dma_rx_callback(void *data)
 	}
 }
 
-/* RX DMA buffer periods */
-#define RX_DMA_PERIODS 4
-
 static int start_rx_dma(struct imx_port *sport)
 {
 	struct scatterlist *sgl = &sport->rx_sgl;
@@ -1061,9 +1059,8 @@ static int start_rx_dma(struct imx_port *sport)
 
 	sport->rx_ring.head = 0;
 	sport->rx_ring.tail = 0;
-	sport->rx_periods = RX_DMA_PERIODS;
 
-	sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE);
+	sg_init_one(sgl, sport->rx_buf, sport->rx_buf_size);
 	ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE);
 	if (ret == 0) {
 		dev_err(dev, "DMA mapping error for RX.\n");
@@ -1174,7 +1171,7 @@ static int imx_uart_dma_init(struct imx_port *sport)
 		goto err;
 	}
 
-	sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	sport->rx_buf = kzalloc(sport->rx_buf_size, GFP_KERNEL);
 	if (!sport->rx_buf) {
 		ret = -ENOMEM;
 		goto err;
@@ -1302,7 +1299,9 @@ static int imx_startup(struct uart_port *port)
 		imx_enable_dma(sport);
 
 	temp = readl(sport->port.membase + UCR1);
-	temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
+	temp |= UCR1_RRDYEN | UCR1_UARTEN;
+	if (sport->have_rtscts)
+			temp |= UCR1_RTSDEN;
 
 	writel(temp, sport->port.membase + UCR1);
 
@@ -1340,29 +1339,13 @@ static int imx_startup(struct uart_port *port)
 	imx_enable_ms(&sport->port);
 
 	/*
-	 * If the serial port is opened for reading start RX DMA immediately
-	 * instead of waiting for RX FIFO interrupts. In our iMX53 the average
-	 * delay for the first reception dropped from approximately 35000
-	 * microseconds to 1000 microseconds.
+	 * Start RX DMA immediately instead of waiting for RX FIFO interrupts.
+	 * In our iMX53 the average delay for the first reception dropped from
+	 * approximately 35000 microseconds to 1000 microseconds.
 	 */
 	if (sport->dma_is_enabled) {
-		struct tty_struct *tty = sport->port.state->port.tty;
-		struct tty_file_private *file_priv;
-		int readcnt = 0;
-
-		spin_lock(&tty->files_lock);
-
-		if (!list_empty(&tty->tty_files))
-			list_for_each_entry(file_priv, &tty->tty_files, list)
-				if (!(file_priv->file->f_flags & O_WRONLY))
-					readcnt++;
-
-		spin_unlock(&tty->files_lock);
-
-		if (readcnt > 0) {
-			imx_disable_rx_int(sport);
-			start_rx_dma(sport);
-		}
+		imx_disable_rx_int(sport);
+		start_rx_dma(sport);
 	}
 
 	spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -2053,6 +2036,7 @@ static int serial_imx_probe_dt(struct imx_port *sport,
 {
 	struct device_node *np = pdev->dev.of_node;
 	int ret;
+	u32 dma_buf_size[2];
 
 	sport->devdata = of_device_get_match_data(&pdev->dev);
 	if (!sport->devdata)
@@ -2076,6 +2060,14 @@ static int serial_imx_probe_dt(struct imx_port *sport,
 	if (of_get_property(np, "rts-gpios", NULL))
 		sport->have_rtsgpio = 1;
 
+	if (!of_property_read_u32_array(np, "fsl,dma-size", dma_buf_size, 2)) {
+		sport->rx_buf_size = dma_buf_size[0] * dma_buf_size[1];
+		sport->rx_periods = dma_buf_size[1];
+	} else {
+		sport->rx_buf_size = RX_BUF_SIZE;
+		sport->rx_periods = RX_DMA_PERIODS;
+	}
+
 	return 0;
 }
 #else
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 60f16795d16b..42e4a4c7597f 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -286,7 +286,7 @@ static int meson_uart_startup(struct uart_port *port)
 	writel(val, port->membase + AML_UART_MISC);
 
 	ret = request_irq(port->irq, meson_uart_interrupt, 0,
-			  meson_uart_type(port), port);
+			  port->name, port);
 
 	return ret;
 }
@@ -298,8 +298,6 @@ static void meson_uart_change_speed(struct uart_port *port, unsigned long baud)
 	while (!meson_uart_tx_empty(port))
 		cpu_relax();
 
-	val = readl(port->membase + AML_UART_REG5);
-	val &= ~AML_UART_BAUD_MASK;
 	if (port->uartclk == 24000000) {
 		val = ((port->uartclk / 3) / baud) - 1;
 		val |= AML_UART_BAUD_XTAL;
@@ -355,7 +353,7 @@ static void meson_uart_set_termios(struct uart_port *port,
 	if (cflags & CSTOPB)
 		val |= AML_UART_STOP_BIN_2SB;
 	else
-		val &= ~AML_UART_STOP_BIN_1SB;
+		val |= AML_UART_STOP_BIN_1SB;
 
 	if (cflags & CRTSCTS)
 		val &= ~AML_UART_TWO_WIRE_EN;
@@ -395,51 +393,25 @@ static int meson_uart_verify_port(struct uart_port *port,
 	return ret;
 }
 
-static int meson_uart_res_size(struct uart_port *port)
-{
-	struct platform_device *pdev = to_platform_device(port->dev);
-	struct resource *res;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(port->dev, "cannot obtain I/O memory region");
-		return -ENODEV;
-	}
-
-	return resource_size(res);
-}
-
 static void meson_uart_release_port(struct uart_port *port)
 {
-	int size = meson_uart_res_size(port);
-
-	if (port->flags & UPF_IOREMAP) {
-		devm_release_mem_region(port->dev, port->mapbase, size);
-		devm_iounmap(port->dev, port->membase);
-		port->membase = NULL;
-	}
+	devm_iounmap(port->dev, port->membase);
+	port->membase = NULL;
+	devm_release_mem_region(port->dev, port->mapbase, port->mapsize);
 }
 
 static int meson_uart_request_port(struct uart_port *port)
 {
-	int size = meson_uart_res_size(port);
-
-	if (size < 0)
-		return size;
-
-	if (!devm_request_mem_region(port->dev, port->mapbase, size,
+	if (!devm_request_mem_region(port->dev, port->mapbase, port->mapsize,
 				     dev_name(port->dev))) {
 		dev_err(port->dev, "Memory region busy\n");
 		return -EBUSY;
 	}
 
-	if (port->flags & UPF_IOREMAP) {
-		port->membase = devm_ioremap_nocache(port->dev,
-						     port->mapbase,
-						     size);
-		if (port->membase == NULL)
-			return -ENOMEM;
-	}
+	port->membase = devm_ioremap_nocache(port->dev, port->mapbase,
+					     port->mapsize);
+	if (!port->membase)
+		return -ENOMEM;
 
 	return 0;
 }
@@ -470,6 +442,14 @@ static struct uart_ops meson_uart_ops = {
 };
 
 #ifdef CONFIG_SERIAL_MESON_CONSOLE
+static void meson_uart_enable_tx_engine(struct uart_port *port)
+{
+	u32 val;
+
+	val = readl(port->membase + AML_UART_CONTROL);
+	val |= AML_UART_TX_EN;
+	writel(val, port->membase + AML_UART_CONTROL);
+}
 
 static void meson_console_putchar(struct uart_port *port, int ch)
 {
@@ -499,7 +479,6 @@ static void meson_serial_port_write(struct uart_port *port, const char *s,
 	}
 
 	val = readl(port->membase + AML_UART_CONTROL);
-	val |= AML_UART_TX_EN;
 	tmp = val & ~(AML_UART_TX_INT_EN | AML_UART_RX_INT_EN);
 	writel(tmp, port->membase + AML_UART_CONTROL);
 
@@ -538,6 +517,8 @@ static int meson_serial_console_setup(struct console *co, char *options)
 	if (!port || !port->membase)
 		return -ENODEV;
 
+	meson_uart_enable_tx_engine(port);
+
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 
@@ -576,11 +557,16 @@ meson_serial_early_console_setup(struct earlycon_device *device, const char *opt
 	if (!device->port.membase)
 		return -ENODEV;
 
+	meson_uart_enable_tx_engine(&device->port);
 	device->con->write = meson_serial_early_console_write;
 	return 0;
 }
+/* Legacy bindings, should be removed when no more used */
 OF_EARLYCON_DECLARE(meson, "amlogic,meson-uart",
 		    meson_serial_early_console_setup);
+/* Stable bindings */
+OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart",
+		    meson_serial_early_console_setup);
 
 #define MESON_SERIAL_CONSOLE	(&meson_serial_console)
 #else
@@ -595,11 +581,76 @@ static struct uart_driver meson_uart_driver = {
 	.cons		= MESON_SERIAL_CONSOLE,
 };
 
+static inline struct clk *meson_uart_probe_clock(struct device *dev,
+						 const char *id)
+{
+	struct clk *clk = NULL;
+	int ret;
+
+	clk = devm_clk_get(dev, id);
+	if (IS_ERR(clk))
+		return clk;
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(dev, "couldn't enable clk\n");
+		return ERR_PTR(ret);
+	}
+
+	devm_add_action_or_reset(dev,
+			(void(*)(void *))clk_disable_unprepare,
+			clk);
+
+	return clk;
+}
+
+/*
+ * This function gets clocks in the legacy non-stable DT bindings.
+ * This code will be remove once all the platforms switch to the
+ * new DT bindings.
+ */
+static int meson_uart_probe_clocks_legacy(struct platform_device *pdev,
+					  struct uart_port *port)
+{
+	struct clk *clk = NULL;
+
+	clk = meson_uart_probe_clock(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	port->uartclk = clk_get_rate(clk);
+
+	return 0;
+}
+
+static int meson_uart_probe_clocks(struct platform_device *pdev,
+				   struct uart_port *port)
+{
+	struct clk *clk_xtal = NULL;
+	struct clk *clk_pclk = NULL;
+	struct clk *clk_baud = NULL;
+
+	clk_pclk = meson_uart_probe_clock(&pdev->dev, "pclk");
+	if (IS_ERR(clk_pclk))
+		return PTR_ERR(clk_pclk);
+
+	clk_xtal = meson_uart_probe_clock(&pdev->dev, "xtal");
+	if (IS_ERR(clk_xtal))
+		return PTR_ERR(clk_xtal);
+
+	clk_baud = meson_uart_probe_clock(&pdev->dev, "baud");
+	if (IS_ERR(clk_baud))
+		return PTR_ERR(clk_baud);
+
+	port->uartclk = clk_get_rate(clk_baud);
+
+	return 0;
+}
+
 static int meson_uart_probe(struct platform_device *pdev)
 {
 	struct resource *res_mem, *res_irq;
 	struct uart_port *port;
-	struct clk *clk;
 	int ret = 0;
 
 	if (pdev->dev.of_node)
@@ -625,15 +676,20 @@ static int meson_uart_probe(struct platform_device *pdev)
 	if (!port)
 		return -ENOMEM;
 
-	clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	/* Use legacy way until all platforms switch to new bindings */
+	if (of_device_is_compatible(pdev->dev.of_node, "amlogic,meson-uart"))
+		ret = meson_uart_probe_clocks_legacy(pdev, port);
+	else
+		ret = meson_uart_probe_clocks(pdev, port);
+
+	if (ret)
+		return ret;
 
-	port->uartclk = clk_get_rate(clk);
 	port->iotype = UPIO_MEM;
 	port->mapbase = res_mem->start;
+	port->mapsize = resource_size(res_mem);
 	port->irq = res_irq->start;
-	port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY;
+	port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY;
 	port->dev = &pdev->dev;
 	port->line = pdev->id;
 	port->type = PORT_MESON;
@@ -668,9 +724,14 @@ static int meson_uart_remove(struct platform_device *pdev)
 	return 0;
 }
 
-
 static const struct of_device_id meson_uart_dt_match[] = {
+	/* Legacy bindings, should be removed when no more used */
 	{ .compatible = "amlogic,meson-uart" },
+	/* Stable bindings */
+	{ .compatible = "amlogic,meson6-uart" },
+	{ .compatible = "amlogic,meson8-uart" },
+	{ .compatible = "amlogic,meson8b-uart" },
+	{ .compatible = "amlogic,meson-gx-uart" },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, meson_uart_dt_match);
diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c
index 1a60a2063e75..67ffecc50e42 100644
--- a/drivers/tty/serial/mpsc.c
+++ b/drivers/tty/serial/mpsc.c
@@ -754,9 +754,10 @@ static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi)
 		if (!dma_set_mask(pi->port.dev, 0xffffffff)) {
 			printk(KERN_ERR "MPSC: Inadequate DMA support\n");
 			rc = -ENXIO;
-		} else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev,
+		} else if ((pi->dma_region = dma_alloc_attrs(pi->port.dev,
 						MPSC_DMA_ALLOC_SIZE,
-						&pi->dma_region_p, GFP_KERNEL))
+						&pi->dma_region_p, GFP_KERNEL,
+						DMA_ATTR_NON_CONSISTENT))
 				== NULL) {
 			printk(KERN_ERR "MPSC: Can't alloc Desc region\n");
 			rc = -ENOMEM;
@@ -771,8 +772,9 @@ static void mpsc_free_ring_mem(struct mpsc_port_info *pi)
 	pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line);
 
 	if (pi->dma_region) {
-		dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE,
-				pi->dma_region, pi->dma_region_p);
+		dma_free_attrs(pi->port.dev, MPSC_DMA_ALLOC_SIZE,
+				pi->dma_region, pi->dma_region_p,
+				DMA_ATTR_NON_CONSISTENT);
 		pi->dma_region = NULL;
 		pi->dma_region_p = (dma_addr_t)NULL;
 	}
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
new file mode 100644
index 000000000000..1b8008797a1b
--- /dev/null
+++ b/drivers/tty/serial/owl-uart.c
@@ -0,0 +1,135 @@
+/*
+ * Actions Semi Owl family serial console
+ *
+ * Copyright 2013 Actions Semi Inc.
+ * Author: Actions Semi, Inc.
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#define OWL_UART_CTL	0x000
+#define OWL_UART_TXDAT	0x008
+#define OWL_UART_STAT	0x00c
+
+#define OWL_UART_CTL_TRFS_TX		BIT(14)
+#define OWL_UART_CTL_EN			BIT(15)
+#define OWL_UART_CTL_RXIE		BIT(18)
+#define OWL_UART_CTL_TXIE		BIT(19)
+
+#define OWL_UART_STAT_RIP		BIT(0)
+#define OWL_UART_STAT_TIP		BIT(1)
+#define OWL_UART_STAT_TFFU		BIT(6)
+#define OWL_UART_STAT_TRFL_MASK		(0x1f << 11)
+#define OWL_UART_STAT_UTBB		BIT(17)
+
+static inline void owl_uart_write(struct uart_port *port, u32 val, unsigned int off)
+{
+	writel(val, port->membase + off);
+}
+
+static inline u32 owl_uart_read(struct uart_port *port, unsigned int off)
+{
+	return readl(port->membase + off);
+}
+
+#ifdef CONFIG_SERIAL_OWL_CONSOLE
+
+static void owl_console_putchar(struct uart_port *port, int ch)
+{
+	if (!port->membase)
+		return;
+
+	while (owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU)
+		cpu_relax();
+
+	owl_uart_write(port, ch, OWL_UART_TXDAT);
+}
+
+static void owl_uart_port_write(struct uart_port *port, const char *s,
+				u_int count)
+{
+	u32 old_ctl, val;
+	unsigned long flags;
+	int locked;
+
+	local_irq_save(flags);
+
+	if (port->sysrq)
+		locked = 0;
+	else if (oops_in_progress)
+		locked = spin_trylock(&port->lock);
+	else {
+		spin_lock(&port->lock);
+		locked = 1;
+	}
+
+	old_ctl = owl_uart_read(port, OWL_UART_CTL);
+	val = old_ctl | OWL_UART_CTL_TRFS_TX;
+	/* disable IRQ */
+	val &= ~(OWL_UART_CTL_RXIE | OWL_UART_CTL_TXIE);
+	owl_uart_write(port, val, OWL_UART_CTL);
+
+	uart_console_write(port, s, count, owl_console_putchar);
+
+	/* wait until all contents have been sent out */
+	while (owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TRFL_MASK)
+		cpu_relax();
+
+	/* clear IRQ pending */
+	val = owl_uart_read(port, OWL_UART_STAT);
+	val |= OWL_UART_STAT_TIP | OWL_UART_STAT_RIP;
+	owl_uart_write(port, val, OWL_UART_STAT);
+
+	owl_uart_write(port, old_ctl, OWL_UART_CTL);
+
+	if (locked)
+		spin_unlock(&port->lock);
+
+	local_irq_restore(flags);
+}
+
+static void owl_uart_early_console_write(struct console *co,
+					 const char *s,
+					 u_int count)
+{
+	struct earlycon_device *dev = co->data;
+
+	owl_uart_port_write(&dev->port, s, count);
+}
+
+static int __init
+owl_uart_early_console_setup(struct earlycon_device *device, const char *opt)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->con->write = owl_uart_early_console_write;
+
+	return 0;
+}
+OF_EARLYCON_DECLARE(owl, "actions,owl-uart",
+		    owl_uart_early_console_setup);
+
+#endif /* CONFIG_SERIAL_OWL_CONSOLE */
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 42caccb5e87e..d3796dc26fa9 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -878,8 +878,7 @@ static int dma_handle_rx(struct eg20t_port *priv)
 	sg_dma_len(sg) = priv->trigger_level;
 
 	sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
-		     sg_dma_len(sg), (unsigned long)priv->rx_buf_virt &
-		     ~PAGE_MASK);
+		     sg_dma_len(sg), offset_in_page(priv->rx_buf_virt));
 
 	sg_dma_address(sg) = priv->rx_buf_dma;
 
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index fcf803ffad19..cdd2f942317c 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -884,14 +884,19 @@ static int sccnxp_probe(struct platform_device *pdev)
 
 	clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
-		if (PTR_ERR(clk) == -EPROBE_DEFER) {
-			ret = -EPROBE_DEFER;
+		ret = PTR_ERR(clk);
+		if (ret == -EPROBE_DEFER)
 			goto err_out;
-		}
+		uartclk = 0;
+	} else {
+		clk_prepare_enable(clk);
+		uartclk = clk_get_rate(clk);
+	}
+
+	if (!uartclk) {
 		dev_notice(&pdev->dev, "Using default clock frequency\n");
 		uartclk = s->chip->freq_std;
-	} else
-		uartclk = clk_get_rate(clk);
+	}
 
 	/* Check input frequency */
 	if ((uartclk < s->chip->freq_min) || (uartclk > s->chip->freq_max)) {
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 13bfd5dcffce..f534a40aebde 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -954,11 +954,10 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
 		    old_custom_divisor != uport->custom_divisor) {
 			/*
 			 * If they're setting up a custom divisor or speed,
-			 * instead of clearing it, then bitch about it. No
-			 * need to rate-limit; it's CAP_SYS_ADMIN only.
+			 * instead of clearing it, then bitch about it.
 			 */
 			if (uport->flags & UPF_SPD_MASK) {
-				dev_notice(uport->dev,
+				dev_notice_ratelimited(uport->dev,
 				       "%s sets custom speed on %s. This is deprecated.\n",
 				      current->comm,
 				      tty_name(port->tty));
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 71707e8e6e3f..da5ddfc14778 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1450,8 +1450,7 @@ static struct dma_chan *sci_request_dma_chan(struct uart_port *port,
 	chan = dma_request_slave_channel(port->dev,
 					 dir == DMA_MEM_TO_DEV ? "tx" : "rx");
 	if (!chan) {
-		dev_warn(port->dev,
-			 "dma_request_slave_channel_compat failed\n");
+		dev_warn(port->dev, "dma_request_slave_channel failed\n");
 		return NULL;
 	}
 
@@ -1558,7 +1557,16 @@ static void sci_free_dma(struct uart_port *port)
 	if (s->chan_rx)
 		sci_rx_dma_release(s, false);
 }
-#else
+
+static void sci_flush_buffer(struct uart_port *port)
+{
+	/*
+	 * In uart_flush_buffer(), the xmit circular buffer has just been
+	 * cleared, so we have to reset tx_dma_len accordingly.
+	 */
+	to_sci_port(port)->tx_dma_len = 0;
+}
+#else /* !CONFIG_SERIAL_SH_SCI_DMA */
 static inline void sci_request_dma(struct uart_port *port)
 {
 }
@@ -1566,7 +1574,9 @@ static inline void sci_request_dma(struct uart_port *port)
 static inline void sci_free_dma(struct uart_port *port)
 {
 }
-#endif
+
+#define sci_flush_buffer	NULL
+#endif /* !CONFIG_SERIAL_SH_SCI_DMA */
 
 static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 {
@@ -2581,6 +2591,7 @@ static const struct uart_ops sci_uart_ops = {
 	.break_ctl	= sci_break_ctl,
 	.startup	= sci_startup,
 	.shutdown	= sci_shutdown,
+	.flush_buffer	= sci_flush_buffer,
 	.set_termios	= sci_set_termios,
 	.pm		= sci_pm,
 	.type		= sci_type,
@@ -2950,6 +2961,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev)
 
 static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized";
 
+static DEFINE_MUTEX(sci_uart_registration_lock);
 static struct uart_driver sci_uart_driver = {
 	.owner		= THIS_MODULE,
 	.driver_name	= "sci",
@@ -3078,6 +3090,16 @@ static int sci_probe_single(struct platform_device *dev,
 		return -EINVAL;
 	}
 
+	mutex_lock(&sci_uart_registration_lock);
+	if (!sci_uart_driver.state) {
+		ret = uart_register_driver(&sci_uart_driver);
+		if (ret) {
+			mutex_unlock(&sci_uart_registration_lock);
+			return ret;
+		}
+	}
+	mutex_unlock(&sci_uart_registration_lock);
+
 	ret = sci_init_single(dev, sciport, index, p, false);
 	if (ret)
 		return ret;
@@ -3201,24 +3223,17 @@ static struct platform_driver sci_driver = {
 
 static int __init sci_init(void)
 {
-	int ret;
-
 	pr_info("%s\n", banner);
 
-	ret = uart_register_driver(&sci_uart_driver);
-	if (likely(ret == 0)) {
-		ret = platform_driver_register(&sci_driver);
-		if (unlikely(ret))
-			uart_unregister_driver(&sci_uart_driver);
-	}
-
-	return ret;
+	return platform_driver_register(&sci_driver);
 }
 
 static void __exit sci_exit(void)
 {
 	platform_driver_unregister(&sci_driver);
-	uart_unregister_driver(&sci_uart_driver);
+
+	if (sci_uart_driver.state)
+		uart_unregister_driver(&sci_uart_driver);
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index e03282d92b59..684cb8dd8050 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -1253,7 +1253,7 @@ next_hrt:
 	return HRTIMER_RESTART;
 }
 
-static struct of_device_id sirfsoc_uart_ids[] = {
+static const struct of_device_id sirfsoc_uart_ids[] = {
 	{ .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,},
 	{ .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart},
 	{ .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp},
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index c0539950f8d7..fde55dcdea5a 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -186,6 +186,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
  * @pclk:		APB clock
  * @baud:		Current baud rate
  * @clk_rate_change_nb:	Notifier block for clock changes
+ * @quirks:		Flags for RXBS support.
  */
 struct cdns_uart {
 	struct uart_port	*port;
@@ -1587,20 +1588,21 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	if (rc) {
 		dev_err(&pdev->dev,
 			"uart_add_one_port() failed; err=%i\n", rc);
-		goto err_out_notif_unreg;
+		goto err_out_pm_disable;
 	}
 
 	return 0;
 
+err_out_pm_disable:
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
 err_out_notif_unreg:
 #ifdef CONFIG_COMMON_CLK
 	clk_notifier_unregister(cdns_uart_data->uartclk,
 			&cdns_uart_data->clk_rate_change_nb);
 #endif
 err_out_clk_disable:
-	pm_runtime_disable(&pdev->dev);
-	pm_runtime_set_suspended(&pdev->dev);
-	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	clk_disable_unprepare(cdns_uart_data->uartclk);
 err_out_clk_dis_pclk:
 	clk_disable_unprepare(cdns_uart_data->pclk);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index f6ffe28b8a0d..2fe216b276e2 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -492,6 +492,29 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld)
 }
 
 /**
+ *	tty_ldisc_failto	-	helper for ldisc failback
+ *	@tty: tty to open the ldisc on
+ *	@ld: ldisc we are trying to fail back to
+ *
+ *	Helper to try and recover a tty when switching back to the old
+ *	ldisc fails and we need something attached.
+ */
+
+static int tty_ldisc_failto(struct tty_struct *tty, int ld)
+{
+	struct tty_ldisc *disc = tty_ldisc_get(tty, ld);
+	int r;
+
+	if (IS_ERR(disc))
+		return PTR_ERR(disc);
+	tty->ldisc = disc;
+	tty_set_termios_ldisc(tty, ld);
+	if ((r = tty_ldisc_open(tty, disc)) < 0)
+		tty_ldisc_put(disc);
+	return r;
+}
+
+/**
  *	tty_ldisc_restore	-	helper for tty ldisc change
  *	@tty: tty to recover
  *	@old: previous ldisc
@@ -502,9 +525,6 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld)
 
 static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 {
-	struct tty_ldisc *new_ldisc;
-	int r;
-
 	/* There is an outstanding reference here so this is safe */
 	old = tty_ldisc_get(tty, old->ops->num);
 	WARN_ON(IS_ERR(old));
@@ -512,17 +532,13 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 	tty_set_termios_ldisc(tty, old->ops->num);
 	if (tty_ldisc_open(tty, old) < 0) {
 		tty_ldisc_put(old);
-		/* This driver is always present */
-		new_ldisc = tty_ldisc_get(tty, N_TTY);
-		if (IS_ERR(new_ldisc))
-			panic("n_tty: get");
-		tty->ldisc = new_ldisc;
-		tty_set_termios_ldisc(tty, N_TTY);
-		r = tty_ldisc_open(tty, new_ldisc);
-		if (r < 0)
-			panic("Couldn't open N_TTY ldisc for "
-			      "%s --- error %d.",
-			      tty_name(tty), r);
+		/* The traditional behaviour is to fall back to N_TTY, we
+		   want to avoid falling back to N_NULL unless we have no
+		   choice to avoid the risk of breaking anything */
+		if (tty_ldisc_failto(tty, N_TTY) < 0 &&
+		    tty_ldisc_failto(tty, N_NULL) < 0)
+			panic("Couldn't open N_NULL ldisc for %s.",
+			      tty_name(tty));
 	}
 }
 
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 1f6e17fc3fb0..a5f88cf0f61d 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -322,15 +322,13 @@ int con_set_trans_old(unsigned char __user * arg)
 {
 	int i;
 	unsigned short inbuf[E_TABSZ];
+	unsigned char ubuf[E_TABSZ];
 
-	if (!access_ok(VERIFY_READ, arg, E_TABSZ))
+	if (copy_from_user(ubuf, arg, E_TABSZ))
 		return -EFAULT;
 
-	for (i = 0; i < E_TABSZ ; i++) {
-		unsigned char uc;
-		__get_user(uc, arg+i);
-		inbuf[i] = UNI_DIRECT_BASE | uc;
-	}
+	for (i = 0; i < E_TABSZ ; i++)
+		inbuf[i] = UNI_DIRECT_BASE | ubuf[i];
 
 	console_lock();
 	memcpy(translations[USER_MAP], inbuf, sizeof(inbuf));
@@ -345,9 +343,6 @@ int con_get_trans_old(unsigned char __user * arg)
 	unsigned short *p = translations[USER_MAP];
 	unsigned char outbuf[E_TABSZ];
 
-	if (!access_ok(VERIFY_WRITE, arg, E_TABSZ))
-		return -EFAULT;
-
 	console_lock();
 	for (i = 0; i < E_TABSZ ; i++)
 	{
@@ -356,22 +351,16 @@ int con_get_trans_old(unsigned char __user * arg)
 	}
 	console_unlock();
 
-	for (i = 0; i < E_TABSZ ; i++)
-		__put_user(outbuf[i], arg+i);
-	return 0;
+	return copy_to_user(arg, outbuf, sizeof(outbuf)) ? -EFAULT : 0;
 }
 
 int con_set_trans_new(ushort __user * arg)
 {
-	int i;
 	unsigned short inbuf[E_TABSZ];
 
-	if (!access_ok(VERIFY_READ, arg, E_TABSZ*sizeof(unsigned short)))
+	if (copy_from_user(inbuf, arg, sizeof(inbuf)))
 		return -EFAULT;
 
-	for (i = 0; i < E_TABSZ ; i++)
-		__get_user(inbuf[i], arg+i);
-
 	console_lock();
 	memcpy(translations[USER_MAP], inbuf, sizeof(inbuf));
 	update_user_maps();
@@ -381,19 +370,13 @@ int con_set_trans_new(ushort __user * arg)
 
 int con_get_trans_new(ushort __user * arg)
 {
-	int i;
 	unsigned short outbuf[E_TABSZ];
 
-	if (!access_ok(VERIFY_WRITE, arg, E_TABSZ*sizeof(unsigned short)))
-		return -EFAULT;
-
 	console_lock();
 	memcpy(outbuf, translations[USER_MAP], sizeof(outbuf));
 	console_unlock();
 
-	for (i = 0; i < E_TABSZ ; i++)
-		__put_user(outbuf[i], arg+i);
-	return 0;
+	return copy_to_user(arg, outbuf, sizeof(outbuf)) ? -EFAULT : 0;
 }
 
 /*
@@ -557,14 +540,9 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 	if (!ct)
 		return 0;
 
-	unilist = kmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL);
-	if (!unilist)
-		return -ENOMEM;
-
-	for (i = ct, plist = unilist; i; i--, plist++, list++) {
-		__get_user(plist->unicode, &list->unicode);
-		__get_user(plist->fontpos, &list->fontpos);
-	}
+	unilist = memdup_user(list, ct * sizeof(struct unipair));
+	if (IS_ERR(unilist))
+		return PTR_ERR(unilist);
 
 	console_lock();
 
@@ -757,11 +735,11 @@ EXPORT_SYMBOL(con_copy_unimap);
  */
 int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list)
 {
-	int i, j, k;
+	int i, j, k, ret = 0;
 	ushort ect;
 	u16 **p1, *p2;
 	struct uni_pagedir *p;
-	struct unipair *unilist, *plist;
+	struct unipair *unilist;
 
 	unilist = kmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL);
 	if (!unilist)
@@ -792,13 +770,11 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni
 		}
 	}
 	console_unlock();
-	for (i = min(ect, ct), plist = unilist; i; i--, list++, plist++) {
-		__put_user(plist->unicode, &list->unicode);
-		__put_user(plist->fontpos, &list->fontpos);
-	}
-	__put_user(ect, uct);
+	if (copy_to_user(list, unilist, min(ect, ct) * sizeof(struct unipair)))
+		ret = -EFAULT;
+	put_user(ect, uct);
 	kfree(unilist);
-	return ((ect <= ct) ? 0 : -ENOMEM);
+	return ret ? ret : (ect <= ct) ? 0 : -ENOMEM;
 }
 
 /*
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 8af8d9542663..f4166263bb3a 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1203,8 +1203,7 @@ DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0);
 #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
     defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
     defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
-    (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) ||\
-    defined(CONFIG_AVR32)
+    (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
 
 #define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\
 			((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001))
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 9c9945284bcf..2ebaba16f785 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -425,7 +425,7 @@ static u8 build_attr(struct vc_data *vc, u8 _color, u8 _intensity, u8 _blink,
 	else if (_underline)
 		a = (a & 0xf0) | vc->vc_ulcolor;
 	else if (_intensity == 0)
-		a = (a & 0xf0) | vc->vc_ulcolor;
+		a = (a & 0xf0) | vc->vc_halfcolor;
 	if (_reverse)
 		a = ((a) & 0x88) | ((((a) >> 4) | ((a) << 4)) & 0x77);
 	if (_blink)
@@ -2709,13 +2709,13 @@ int tioclinux(struct tty_struct *tty, unsigned long arg)
 	 * related to the kernel should not use this.
 	 */
 			data = vt_get_shift_state();
-			ret = __put_user(data, p);
+			ret = put_user(data, p);
 			break;
 		case TIOCL_GETMOUSEREPORTING:
 			console_lock();	/* May be overkill */
 			data = mouse_reporting();
 			console_unlock();
-			ret = __put_user(data, p);
+			ret = put_user(data, p);
 			break;
 		case TIOCL_SETVESABLANK:
 			console_lock();
@@ -2724,7 +2724,7 @@ int tioclinux(struct tty_struct *tty, unsigned long arg)
 			break;
 		case TIOCL_GETKMSGREDIRECT:
 			data = vt_get_kmsg_redirect();
-			ret = __put_user(data, p);
+			ret = put_user(data, p);
 			break;
 		case TIOCL_SETKMSGREDIRECT:
 			if (!capable(CAP_SYS_ADMIN)) {
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 0cbfe1ff6f6c..96d389cb506c 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -266,10 +266,6 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_
 
 	if (copy_from_user(&tmp, user_ud, sizeof tmp))
 		return -EFAULT;
-	if (tmp.entries)
-		if (!access_ok(VERIFY_WRITE, tmp.entries,
-				tmp.entry_ct*sizeof(struct unipair)))
-			return -EFAULT;
 	switch (cmd) {
 	case PIO_UNIMAP:
 		if (!perm)
@@ -1170,10 +1166,6 @@ compat_unimap_ioctl(unsigned int cmd, struct compat_unimapdesc __user *user_ud,
 	if (copy_from_user(&tmp, user_ud, sizeof tmp))
 		return -EFAULT;
 	tmp_entries = compat_ptr(tmp.entries);
-	if (tmp_entries)
-		if (!access_ok(VERIFY_WRITE, tmp_entries,
-				tmp.entry_ct*sizeof(struct unipair)))
-			return -EFAULT;
 	switch (cmd) {
 	case PIO_UNIMAP:
 		if (!perm)
author	Linus Torvalds <torvalds@linux-foundation.org>	2017-07-03 20:04:16 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2017-07-03 20:04:16 -0700
commit	9a715cd54347948e74f1a597da22884af287727d (patch)
tree	0a824e6501e9a8dcb3fdd05749e13c149e7dfb9f /drivers/tty
parent	Merge tag 'staging-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging (diff)
parent	tty: serial: lpuart: add a more accurate baud rate calculation method (diff)
download	linux-dev-9a715cd54347948e74f1a597da22884af287727d.tar.xz linux-dev-9a715cd54347948e74f1a597da22884af287727d.zip