Merge tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 5.18-rc1.

  Nothing major in here, just lots of little improvements and cleanups
  and new device support. Highlights are:

   - list iterator fixups for when we walk past the end of the list (a
     common problem that was cut/pasted in almost all USB gadget
     drivers)

   - xen USB driver "hardening" for malicious hosts

   - xhci driver updates and fixes for more hardware types

   - xhci debug cable fixes to make it actually work again

   - usb gadget audio driver improvements

   - usb gadget storage fixes to work with OS-X

   - lots of other small usb gadget fixes and updates

   - USB DWC3 driver improvements for more hardware types

   - Lots of other small USB driver improvements

   - DTS updates for some USB platforms

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
  dt-bindings: usb: mtk-xhci: add compatible for mt8186
  usb: dwc3: Issue core soft reset before enabling run/stop
  usb: gadget: Makefile: remove ccflags-y
  USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
  usb: gadget: eliminate anonymous module_init & module_exit
  usb: usbip: eliminate anonymous module_init & module_exit
  xen/usb: harden xen_hcd against malicious backends
  usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
  usb: dwc3: gadget: move cmd_endtransfer to extra function
  usb: dwc3: gadget: ep_queue simplify isoc start condition
  xen/usb: don't use arbitrary_virt_to_machine()
  usb: isp1760: remove redundant max_packet() macro
  usb: oxu210hp-hcd: remove redundant call to max_packet() macro
  usb: common: usb-conn-gpio: Make VBUS supply completely optional
  USB: storage: ums-realtek: fix error code in rts51x_read_mem()
  usb: early: xhci-dbc: Fix xdbc number parsing
  usb: early: xhci-dbc: Remove duplicate keep parsing
  x86/tsc: Be consistent about use_tsc_delay()
  usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
  ...

5 files changed, 39 insertions, 26 deletions

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index fa66e6e58792..6abb7294e919 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -139,30 +139,42 @@ MODULE_PARM_DESC(usbfs_memory_mb,
 /* Hard limit, necessary to avoid arithmetic overflow */
 #define USBFS_XFER_MAX         (UINT_MAX / 2 - 1000000)
 
-static atomic64_t usbfs_memory_usage;	/* Total memory currently allocated */
+static DEFINE_SPINLOCK(usbfs_memory_usage_lock);
+static u64 usbfs_memory_usage;	/* Total memory currently allocated */
 
 /* Check whether it's okay to allocate more memory for a transfer */
 static int usbfs_increase_memory_usage(u64 amount)
 {
-	u64 lim;
+	u64 lim, total_mem;
+	unsigned long flags;
+	int ret;
 
 	lim = READ_ONCE(usbfs_memory_mb);
 	lim <<= 20;
 
-	atomic64_add(amount, &usbfs_memory_usage);
-
-	if (lim > 0 && atomic64_read(&usbfs_memory_usage) > lim) {
-		atomic64_sub(amount, &usbfs_memory_usage);
-		return -ENOMEM;
-	}
+	ret = 0;
+	spin_lock_irqsave(&usbfs_memory_usage_lock, flags);
+	total_mem = usbfs_memory_usage + amount;
+	if (lim > 0 && total_mem > lim)
+		ret = -ENOMEM;
+	else
+		usbfs_memory_usage = total_mem;
+	spin_unlock_irqrestore(&usbfs_memory_usage_lock, flags);
 
-	return 0;
+	return ret;
 }
 
 /* Memory for a transfer is being deallocated */
 static void usbfs_decrease_memory_usage(u64 amount)
 {
-	atomic64_sub(amount, &usbfs_memory_usage);
+	unsigned long flags;
+
+	spin_lock_irqsave(&usbfs_memory_usage_lock, flags);
+	if (amount > usbfs_memory_usage)
+		usbfs_memory_usage = 0;
+	else
+		usbfs_memory_usage -= amount;
+	spin_unlock_irqrestore(&usbfs_memory_usage_lock, flags);
 }
 
 static int connected(struct usb_dev_state *ps)
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index dd44e37a454a..8176bc81a635 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -248,7 +248,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id,
 					hcd->rsrc_len, driver->description))
 				break;
 		}
-		if (region == PCI_ROM_RESOURCE) {
+		if (region == PCI_STD_NUM_BARS) {
 			dev_dbg(&dev->dev, "no i/o regions available\n");
 			retval = -EBUSY;
 			goto put_hcd;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 47a1c8bddf86..1460857026e0 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2983,8 +2983,12 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 						status);
 		}
 
-		/* Check for disconnect or reset */
-		if (status == 0 || status == -ENOTCONN || status == -ENODEV) {
+		/*
+		 * Check for disconnect or reset, and bail out after several
+		 * reset attempts to avoid warm reset loop.
+		 */
+		if (status == 0 || status == -ENOTCONN || status == -ENODEV ||
+		    (status == -EBUSY && i == PORT_RESET_TRIES - 1)) {
 			usb_clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_RESET);
 
@@ -5005,6 +5009,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 		retval = usb_get_bos_descriptor(udev);
 		if (!retval) {
 			udev->lpm_capable = usb_device_supports_lpm(udev);
+			udev->lpm_disable_count = 1;
 			usb_set_lpm_parameters(udev);
 		}
 	}
@@ -5928,16 +5933,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	 */
 	usb_disable_usb2_hardware_lpm(udev);
 
-	/* Disable LPM while we reset the device and reinstall the alt settings.
-	 * Device-initiated LPM, and system exit latency settings are cleared
-	 * when the device is reset, so we have to set them up again.
-	 */
-	ret = usb_unlocked_disable_lpm(udev);
-	if (ret) {
-		dev_err(&udev->dev, "%s Failed to disable LPM\n", __func__);
-		goto re_enumerate_no_bos;
-	}
-
 	bos = udev->bos;
 	udev->bos = NULL;
 
@@ -6042,8 +6037,6 @@ done:
 re_enumerate:
 	usb_release_bos_descriptor(udev);
 	udev->bos = bos;
-re_enumerate_no_bos:
-	/* LPM state doesn't matter when we're about to destroy the device. */
 	hub_port_logical_disconnect(parent_hub, port1);
 	return -ENODEV;
 }
diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c
index 50b2fc7fcc0e..bb1da35eb891 100644
--- a/drivers/usb/core/usb-acpi.c
+++ b/drivers/usb/core/usb-acpi.c
@@ -166,7 +166,7 @@ usb_acpi_get_companion_for_port(struct usb_port *port_dev)
 		if (!parent_handle)
 			return NULL;
 
-		acpi_bus_get_device(parent_handle, &adev);
+		adev = acpi_fetch_acpi_dev(parent_handle);
 		port1 = port_dev->portnum;
 	}
 
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 2ce3667ec6fa..2f71636af6e1 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -688,6 +688,10 @@ EXPORT_SYMBOL_GPL(usb_alloc_dev);
  * Drivers for USB interfaces should normally record such references in
  * their probe() methods, when they bind to an interface, and release
  * them by calling usb_put_dev(), in their disconnect() methods.
+ * However, if a driver does not access the usb_device structure after
+ * its disconnect() method returns then refcounting is not necessary,
+ * because the USB core guarantees that a usb_device will not be
+ * deallocated until after all of its interface drivers have been unbound.
  *
  * Return: A pointer to the device with the incremented reference counter.
  */
@@ -722,6 +726,10 @@ EXPORT_SYMBOL_GPL(usb_put_dev);
  * Drivers for USB interfaces should normally record such references in
  * their probe() methods, when they bind to an interface, and release
  * them by calling usb_put_intf(), in their disconnect() methods.
+ * However, if a driver does not access the usb_interface structure after
+ * its disconnect() method returns then refcounting is not necessary,
+ * because the USB core guarantees that a usb_interface will not be
+ * deallocated until after its driver has been unbound.
  *
  * Return: A pointer to the interface with the incremented reference counter.
  */