usb: dwc3: Fix dr_mode validation

This patch follows the similar fix in dwc2. See
commit 5268ed9d2e3b ("usb: dwc2: Fix dr_mode validation")

Currently, the dr_mode is only checked against the module configuration.
It also needs to be checked against the hardware capablities.

The driver now checks if both the module configuration and hardware are
capable of the dr_mode value. If not, then it will issue a warning and
fall back to a supported value. If it is unable to fall back to a
suitable value, then the probe will fail.

Behavior summary:

      module          :  actual
 HW   config  dr_mode :  dr_mode
---------------------------------
 host  host   any     :  host
 host  dev    any     :  INVALID
 host  otg    any     :  host

 dev   host   any     :  INVALID
 dev   dev    any     :  dev
 dev   otg    any     :  dev

 otg   host   any     :  host
 otg   dev    any     :  dev
 otg   otg    any     :  dr_mode

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

1 files changed, 54 insertions, 11 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index d6d3fa0fa528..dcacc7056271 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -49,6 +49,57 @@
 
 #define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
 
+/**
+ * dwc3_get_dr_mode - Validates and sets dr_mode
+ * @dwc: pointer to our context structure
+ */
+static int dwc3_get_dr_mode(struct dwc3 *dwc)
+{
+	enum usb_dr_mode mode;
+	struct device *dev = dwc->dev;
+	unsigned int hw_mode;
+
+	if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
+		dwc->dr_mode = USB_DR_MODE_OTG;
+
+	mode = dwc->dr_mode;
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+
+	switch (hw_mode) {
+	case DWC3_GHWPARAMS0_MODE_GADGET:
+		if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) {
+			dev_err(dev,
+				"Controller does not support host mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_PERIPHERAL;
+		break;
+	case DWC3_GHWPARAMS0_MODE_HOST:
+		if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) {
+			dev_err(dev,
+				"Controller does not support device mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_HOST;
+		break;
+	default:
+		if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
+			mode = USB_DR_MODE_HOST;
+		else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
+			mode = USB_DR_MODE_PERIPHERAL;
+	}
+
+	if (mode != dwc->dr_mode) {
+		dev_warn(dev,
+			 "Configuration mismatch. dr_mode forced to %s\n",
+			 mode == USB_DR_MODE_HOST ? "host" : "gadget");
+
+		dwc->dr_mode = mode;
+	}
+
+	return 0;
+}
+
 void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
 {
 	u32 reg;
@@ -1023,17 +1074,9 @@ static int dwc3_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
-	if (IS_ENABLED(CONFIG_USB_DWC3_HOST) &&
-			(dwc->dr_mode == USB_DR_MODE_OTG ||
-					dwc->dr_mode == USB_DR_MODE_UNKNOWN))
-		dwc->dr_mode = USB_DR_MODE_HOST;
-	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET) &&
-			(dwc->dr_mode == USB_DR_MODE_OTG ||
-					dwc->dr_mode == USB_DR_MODE_UNKNOWN))
-		dwc->dr_mode = USB_DR_MODE_PERIPHERAL;
-
-	if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
-		dwc->dr_mode = USB_DR_MODE_OTG;
+	ret = dwc3_get_dr_mode(dwc);
+	if (ret)
+		goto err3;
 
 	ret = dwc3_alloc_scratch_buffers(dwc);
 	if (ret)