Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: Changes for v5.4 merge window

With only 45 non-merge commits, we have a small merge window from the
Gadget perspective.

The biggest change here is the addition of the Cadence USB3 DRD
Driver. All other changes are small, non-critical fixes or smaller new
features like the improvement to BESL handling in dwc3.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

* tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits)
  usb: gadget: net2280: Add workaround for AB chip Errata 11
  usb: gadget: net2280: Move all "ll" registers in one structure
  usb: dwc3: gadget: Workaround Mirosoft's BESL check
  usb:cdns3 Fix for stuck packets in on-chip OUT buffer.
  usb: cdns3: Add Cadence USB3 DRD Driver
  usb: common: Simplify usb_decode_get_set_descriptor function.
  usb: common: Patch simplify usb_decode_set_clear_feature function.
  usb: common: Separated decoding functions from dwc3 driver.
  dt-bindings: add binding for USBSS-DRD controller.
  usb: gadget: composite: Set recommended BESL values
  usb: dwc3: gadget: Set BESL config parameter
  usb: dwc3: Separate field holding multiple properties
  usb: gadget: Export recommended BESL values
  usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant
  usb: udc: lpc32xx: silence fall-through warning
  usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables
  usb: udc: lpc32xx: remove set but not used 3 variables
  usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails
  usb: dwc3: st: Add of_dev_put() in probe function
  usb: dwc3: st: Add of_node_put() before return in probe function
  ...

1 files changed, 26 insertions, 12 deletions

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 76883ff4f5bb..d516e8d6cd7f 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -612,6 +612,7 @@ static int bos_desc(struct usb_composite_dev *cdev)
 	struct usb_ext_cap_descriptor	*usb_ext;
 	struct usb_dcd_config_params	dcd_config_params;
 	struct usb_bos_descriptor	*bos = cdev->req->buf;
+	unsigned int			besl = 0;
 
 	bos->bLength = USB_DT_BOS_SIZE;
 	bos->bDescriptorType = USB_DT_BOS;
@@ -619,6 +620,29 @@ static int bos_desc(struct usb_composite_dev *cdev)
 	bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE);
 	bos->bNumDeviceCaps = 0;
 
+	/* Get Controller configuration */
+	if (cdev->gadget->ops->get_config_params) {
+		cdev->gadget->ops->get_config_params(cdev->gadget,
+						     &dcd_config_params);
+	} else {
+		dcd_config_params.besl_baseline =
+			USB_DEFAULT_BESL_UNSPECIFIED;
+		dcd_config_params.besl_deep =
+			USB_DEFAULT_BESL_UNSPECIFIED;
+		dcd_config_params.bU1devExitLat =
+			USB_DEFAULT_U1_DEV_EXIT_LAT;
+		dcd_config_params.bU2DevExitLat =
+			cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
+	}
+
+	if (dcd_config_params.besl_baseline != USB_DEFAULT_BESL_UNSPECIFIED)
+		besl = USB_BESL_BASELINE_VALID |
+			USB_SET_BESL_BASELINE(dcd_config_params.besl_baseline);
+
+	if (dcd_config_params.besl_deep != USB_DEFAULT_BESL_UNSPECIFIED)
+		besl |= USB_BESL_DEEP_VALID |
+			USB_SET_BESL_DEEP(dcd_config_params.besl_deep);
+
 	/*
 	 * A SuperSpeed device shall include the USB2.0 extension descriptor
 	 * and shall support LPM when operating in USB2.0 HS mode.
@@ -629,7 +653,8 @@ static int bos_desc(struct usb_composite_dev *cdev)
 	usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
 	usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
 	usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
-	usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT | USB_BESL_SUPPORT);
+	usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT |
+					    USB_BESL_SUPPORT | besl);
 
 	/*
 	 * The Superspeed USB Capability descriptor shall be implemented by all
@@ -650,17 +675,6 @@ static int bos_desc(struct usb_composite_dev *cdev)
 						      USB_HIGH_SPEED_OPERATION |
 						      USB_5GBPS_OPERATION);
 		ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
-
-		/* Get Controller configuration */
-		if (cdev->gadget->ops->get_config_params) {
-			cdev->gadget->ops->get_config_params(cdev->gadget,
-				&dcd_config_params);
-		} else {
-			dcd_config_params.bU1devExitLat =
-				USB_DEFAULT_U1_DEV_EXIT_LAT;
-			dcd_config_params.bU2DevExitLat =
-				cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
-		}
 		ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
 		ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
 	}