diff options
| author |   Anton Vorontsov <avorontsov@ru.mvista.com> | 2009-01-10 05:03:21 +0300 |
|---|---|---|
| committer |   Greg Kroah-Hartman <gregkh@kvm.kroah.org> | 2009-01-27 16:15:38 -0800 |
| commit | 236dd4d18f293e3c9798f35c08272196826a980d (patch) | |
| tree | 5e8f7dc48318e82c34758c1a807d034034b96221 /drivers/usb/host/Makefile | |
| parent | USB: option: add QUANTA HSDPA Data Card device ids (diff) | |
| download | linux-dev-236dd4d18f293e3c9798f35c08272196826a980d.tar.xz linux-dev-236dd4d18f293e3c9798f35c08272196826a980d.zip | |
USB: Driver for Freescale QUICC Engine USB Host Controller
This patch adds support for the FHCI USB controller, as found
in the Freescale MPC836x and MPC832x processors. It can support
Full or Low speed modes.
Quite a lot the hardware is doing by itself (SOF generation, CRC
generation and checking), though scheduling and retransmission is on
software's shoulders.
This controller does not integrate the root hub, so this driver also
fakes one-port hub. External hub is required to support more than
one device.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/host/Makefile')
| -rw-r--r-- | drivers/usb/host/Makefile | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index e5f3f20787e4..f163571e33d8 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -7,6 +7,11 @@ ifeq ($(CONFIG_USB_DEBUG),y) endif isp1760-objs := isp1760-hcd.o isp1760-if.o +fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \ + fhci-tds.o fhci-sched.o +ifeq ($(CONFIG_FHCI_DEBUG),y) +fhci-objs += fhci-dbg.o +endif obj-$(CONFIG_USB_WHCI_HCD) += whci/ @@ -17,6 +22,7 @@ obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o +obj-$(CONFIG_USB_FHCI_HCD) += fhci.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o |