diff options
| author |   Uwe Kleine-König <u.kleine-koenig@pengutronix.de> | 2010-11-02 10:30:57 +0100 |
|---|---|---|
| committer |   Greg Kroah-Hartman <gregkh@suse.de> | 2010-11-11 06:56:17 -0800 |
| commit | 724c85251f78f1332e0a28f80cead0cee5b7c906 (patch) | |
| tree | 17d0321d90f52b09bbd77070d23b20d5096d5565 /drivers/usb/host | |
| parent | USB: Fix FSL USB driver on non Open Firmware systems (diff) | |
| download | linux-dev-724c85251f78f1332e0a28f80cead0cee5b7c906.tar.xz linux-dev-724c85251f78f1332e0a28f80cead0cee5b7c906.zip | |
USB: ehci/mxc: compile fix
Commit
65fd427 (USB: ehci tdi : let's tdi_reset set host mode)
broke the build using ARM's mx51_defconfig:
CC drivers/usb/host/ehci-hcd.o
In file included from drivers/usb/host/ehci-hcd.c:1166:
drivers/usb/host/ehci-mxc.c: In function 'ehci_mxc_drv_probe':
drivers/usb/host/ehci-mxc.c:192: error: 'ehci' undeclared (first use in this function)
drivers/usb/host/ehci-mxc.c:192: error: (Each undeclared identifier is reported only once
drivers/usb/host/ehci-mxc.c:192: error: for each function it appears in.)
drivers/usb/host/ehci-mxc.c:117: warning: unused variable 'temp'
make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1
make[2]: *** [drivers/usb/host/ehci-hcd.o] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2
Fix it together with the warning about the unused variable and use
msleep instead of mdelay as requested by Alan Stern.
Cc: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Nguyen Dinh-R00091 <R00091@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/ehci-mxc.c | 14 |
1 files changed, 9 insertions, 5 deletions
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index ac9c4d7c44af..bce85055019a 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -36,6 +36,8 @@ struct ehci_mxc_priv { static int ehci_mxc_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct device *dev = hcd->self.controller; + struct mxc_usbh_platform_data *pdata = dev_get_platdata(dev); int retval; /* EHCI registers start at offset 0x100 */ @@ -63,6 +65,12 @@ static int ehci_mxc_setup(struct usb_hcd *hcd) ehci_reset(ehci); + /* set up the PORTSCx register */ + ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]); + + /* is this really needed? */ + msleep(10); + ehci_port_power(ehci, 0); return 0; } @@ -114,7 +122,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data; struct usb_hcd *hcd; struct resource *res; - int irq, ret, temp; + int irq, ret; struct ehci_mxc_priv *priv; struct device *dev = &pdev->dev; @@ -188,10 +196,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) clk_enable(priv->ahbclk); } - /* set up the PORTSCx register */ - ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]); - mdelay(10); - /* setup specific usb hw */ ret = mxc_initialize_usb_hw(pdev->id, pdata->flags); if (ret < 0) |