Merge tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big set of USB and PHY patches for 3.19-rc1.

  The normal churn in the USB gadget area is in here, as well as xhci
  and other individual USB driver updates.  The PHY tree is also in
  here, as there were dependancies on the USB tree.

  All of these have been in linux-next"

* tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits)
  arm: omap3: twl: remove usb phy init data
  usbip: fix error handling in stub_probe()
  usb: gadget: udc: missing curly braces
  USB: mos7720: delete some unneeded code
  wusb: replace memset by memzero_explicit
  usbip: remove unneeded structure
  usb: xhci: fix comment for PORT_DEV_REMOVE
  xhci: don't use the same variable for stopped and halted rings current TD
  xhci: clear extra bits from slot context when setting max exit latency
  xhci: cleanup finish_td function
  USB: adutux: NULL dereferences on disconnect
  usb: chipidea: fix platform_no_drv_owner.cocci warnings
  usb: chipidea: Fixed a few typos in comments
  Documentation: bindings: add doc for the USB2 ChipIdea USB driver
  usb: chipidea: add a usb2 driver for ci13xxx
  usb: chipidea: fix phy handling
  usb: chipidea: remove duplicate dev_set_drvdata for host_start
  usb: chipidea: parameter 'mode' isn't needed for hw_device_reset
  usb: chipidea: add controller reset API
  usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER
  ...

1 files changed, 33 insertions, 0 deletions

diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index b2aa003bf411..cb3e14780a7e 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -27,12 +27,15 @@ enum qcserial_layouts {
 	QCSERIAL_G2K = 0,	/* Gobi 2000 */
 	QCSERIAL_G1K = 1,	/* Gobi 1000 */
 	QCSERIAL_SWI = 2,	/* Sierra Wireless */
+	QCSERIAL_HWI = 3,	/* Huawei */
 };
 
 #define DEVICE_G1K(v, p) \
 	USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
 #define DEVICE_SWI(v, p) \
 	USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI
+#define DEVICE_HWI(v, p) \
+	USB_DEVICE(v, p), .driver_info = QCSERIAL_HWI
 
 static const struct usb_device_id id_table[] = {
 	/* Gobi 1000 devices */
@@ -157,6 +160,9 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_SWI(0x413c, 0x81a8)},	/* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a9)},	/* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
 
+	/* Huawei devices */
+	{DEVICE_HWI(0x03f0, 0x581d)},	/* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */
+
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -287,6 +293,33 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 			break;
 		}
 		break;
+	case QCSERIAL_HWI:
+		/*
+		 * Huawei layout:
+		 * 0: AT-capable modem port
+		 * 1: DM/DIAG
+		 * 2: AT-capable modem port
+		 * 3: CCID-compatible PCSC interface
+		 * 4: QMI/net
+		 * 5: NMEA
+		 */
+		switch (ifnum) {
+		case 0:
+		case 2:
+			dev_dbg(dev, "Modem port found\n");
+			break;
+		case 1:
+			dev_dbg(dev, "DM/DIAG interface found\n");
+			break;
+		case 5:
+			dev_dbg(dev, "NMEA GPS interface found\n");
+			break;
+		default:
+			/* don't claim any unsupported interface */
+			altsetting = -1;
+			break;
+		}
+		break;
 	default:
 		dev_err(dev, "unsupported device layout type: %lu\n",
 			id->driver_info);