Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt/PHY driver updates from Greg KH:
 "Here is the big USB and Thunderbolt and PHY driver updates for
  5.6-rc1.

  With the advent of USB4, "Thunderbolt" has really become USB4, so the
  renaming of the Kconfig option and starting to share subsystem code
  has begun, hence both subsystems coming in through the same tree here.

  PHY driver updates also touched USB drivers, so that is coming in
  through here as well.

  Major stuff included in here are:
   - USB 4 initial support added (i.e. Thunderbolt)
   - musb driver updates
   - USB gadget driver updates
   - PHY driver updates
   - USB PHY driver updates
   - lots of USB serial stuff fixed up
   - USB typec updates
   - USB-IP fixes
   - lots of other smaller USB driver updates

  All of these have been in linux-next for a while now (the usb-serial
  tree is already tested in linux-next on its own before merged into
  here), with no reported issues"

[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
  that causes configuration warnings    - Linus ]

* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  Doc: ABI: add usb charger uevent
  usb: phy: show USB charger type for user
  usb: cdns3: fix spelling mistake and rework grammar in text
  usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
  USB: serial: ir-usb: simplify endpoint check
  USB: serial: ir-usb: make set_termios synchronous
  USB: serial: ir-usb: fix IrLAP framing
  USB: serial: ir-usb: fix link-speed handling
  USB: serial: ir-usb: add missing endpoint sanity check
  usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
  usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
  usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
  usb: typec: tcpci: mask event interrupts when remove driver
  usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
  usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
  usb: chipidea: handle single role for usb role class
  usb: musb: fix spelling mistake: "periperal" -> "peripheral"
  phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
  USB: usbfs: Always unlink URBs in reverse order
  ...

1 files changed, 189 insertions, 2 deletions

diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 3370b3fc37b1..a5b8530490db 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/usb/typec_dp.h>
 
 #include <asm/unaligned.h>
 #include "ucsi.h"
@@ -173,6 +174,15 @@ struct ccg_resp {
 	u8 length;
 };
 
+struct ucsi_ccg_altmode {
+	u16 svid;
+	u32 mid;
+	u8 linked_idx;
+	u8 active_idx;
+#define UCSI_MULTI_DP_INDEX	(0xff)
+	bool checked;
+} __packed;
+
 struct ucsi_ccg {
 	struct device *dev;
 	struct ucsi *ucsi;
@@ -198,6 +208,11 @@ struct ucsi_ccg {
 	struct work_struct pm_work;
 
 	struct completion complete;
+
+	u64 last_cmd_sent;
+	bool has_multiple_dp;
+	struct ucsi_ccg_altmode orig[UCSI_MAX_ALTMODES];
+	struct ucsi_ccg_altmode updated[UCSI_MAX_ALTMODES];
 };
 
 static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
@@ -319,12 +334,169 @@ static int ucsi_ccg_init(struct ucsi_ccg *uc)
 	return -ETIMEDOUT;
 }
 
+static void ucsi_ccg_update_get_current_cam_cmd(struct ucsi_ccg *uc, u8 *data)
+{
+	u8 cam, new_cam;
+
+	cam = data[0];
+	new_cam = uc->orig[cam].linked_idx;
+	uc->updated[new_cam].active_idx = cam;
+	data[0] = new_cam;
+}
+
+static bool ucsi_ccg_update_altmodes(struct ucsi *ucsi,
+				     struct ucsi_altmode *orig,
+				     struct ucsi_altmode *updated)
+{
+	struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi);
+	struct ucsi_ccg_altmode *alt, *new_alt;
+	int i, j, k = 0;
+	bool found = false;
+
+	alt = uc->orig;
+	new_alt = uc->updated;
+	memset(uc->updated, 0, sizeof(uc->updated));
+
+	/*
+	 * Copy original connector altmodes to new structure.
+	 * We need this before second loop since second loop
+	 * checks for duplicate altmodes.
+	 */
+	for (i = 0; i < UCSI_MAX_ALTMODES; i++) {
+		alt[i].svid = orig[i].svid;
+		alt[i].mid = orig[i].mid;
+		if (!alt[i].svid)
+			break;
+	}
+
+	for (i = 0; i < UCSI_MAX_ALTMODES; i++) {
+		if (!alt[i].svid)
+			break;
+
+		/* already checked and considered */
+		if (alt[i].checked)
+			continue;
+
+		if (!DP_CONF_GET_PIN_ASSIGN(alt[i].mid)) {
+			/* Found Non DP altmode */
+			new_alt[k].svid = alt[i].svid;
+			new_alt[k].mid |= alt[i].mid;
+			new_alt[k].linked_idx = i;
+			alt[i].linked_idx = k;
+			updated[k].svid = new_alt[k].svid;
+			updated[k].mid = new_alt[k].mid;
+			k++;
+			continue;
+		}
+
+		for (j = i + 1; j < UCSI_MAX_ALTMODES; j++) {
+			if (alt[i].svid != alt[j].svid ||
+			    !DP_CONF_GET_PIN_ASSIGN(alt[j].mid)) {
+				continue;
+			} else {
+				/* Found duplicate DP mode */
+				new_alt[k].svid = alt[i].svid;
+				new_alt[k].mid |= alt[i].mid | alt[j].mid;
+				new_alt[k].linked_idx = UCSI_MULTI_DP_INDEX;
+				alt[i].linked_idx = k;
+				alt[j].linked_idx = k;
+				alt[j].checked = true;
+				found = true;
+			}
+		}
+		if (found) {
+			uc->has_multiple_dp = true;
+		} else {
+			/* Didn't find any duplicate DP altmode */
+			new_alt[k].svid = alt[i].svid;
+			new_alt[k].mid |= alt[i].mid;
+			new_alt[k].linked_idx = i;
+			alt[i].linked_idx = k;
+		}
+		updated[k].svid = new_alt[k].svid;
+		updated[k].mid = new_alt[k].mid;
+		k++;
+	}
+	return found;
+}
+
+static void ucsi_ccg_update_set_new_cam_cmd(struct ucsi_ccg *uc,
+					    struct ucsi_connector *con,
+					    u64 *cmd)
+{
+	struct ucsi_ccg_altmode *new_port, *port;
+	struct typec_altmode *alt = NULL;
+	u8 new_cam, cam, pin;
+	bool enter_new_mode;
+	int i, j, k = 0xff;
+
+	port = uc->orig;
+	new_cam = UCSI_SET_NEW_CAM_GET_AM(*cmd);
+	new_port = &uc->updated[new_cam];
+	cam = new_port->linked_idx;
+	enter_new_mode = UCSI_SET_NEW_CAM_ENTER(*cmd);
+
+	/*
+	 * If CAM is UCSI_MULTI_DP_INDEX then this is DP altmode
+	 * with multiple DP mode. Find out CAM for best pin assignment
+	 * among all DP mode. Priorite pin E->D->C after making sure
+	 * the partner supports that pin.
+	 */
+	if (cam == UCSI_MULTI_DP_INDEX) {
+		if (enter_new_mode) {
+			for (i = 0; con->partner_altmode[i]; i++) {
+				alt = con->partner_altmode[i];
+				if (alt->svid == new_port->svid)
+					break;
+			}
+			/*
+			 * alt will always be non NULL since this is
+			 * UCSI_SET_NEW_CAM command and so there will be
+			 * at least one con->partner_altmode[i] with svid
+			 * matching with new_port->svid.
+			 */
+			for (j = 0; port[j].svid; j++) {
+				pin = DP_CONF_GET_PIN_ASSIGN(port[j].mid);
+				if (alt && port[j].svid == alt->svid &&
+				    (pin & DP_CONF_GET_PIN_ASSIGN(alt->vdo))) {
+					/* prioritize pin E->D->C */
+					if (k == 0xff || (k != 0xff && pin >
+					    DP_CONF_GET_PIN_ASSIGN(port[k].mid))
+					    ) {
+						k = j;
+					}
+				}
+			}
+			cam = k;
+			new_port->active_idx = cam;
+		} else {
+			cam = new_port->active_idx;
+		}
+	}
+	*cmd &= ~UCSI_SET_NEW_CAM_AM_MASK;
+	*cmd |= UCSI_SET_NEW_CAM_SET_AM(cam);
+}
+
 static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset,
 			 void *val, size_t val_len)
 {
+	struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi);
+	int ret;
 	u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset);
 
-	return ccg_read(ucsi_get_drvdata(ucsi), reg, val, val_len);
+	ret = ccg_read(uc, reg, val, val_len);
+	if (ret)
+		return ret;
+
+	if (offset == UCSI_MESSAGE_IN) {
+		if (UCSI_COMMAND(uc->last_cmd_sent) == UCSI_GET_CURRENT_CAM &&
+		    uc->has_multiple_dp) {
+			ucsi_ccg_update_get_current_cam_cmd(uc, (u8 *)val);
+		}
+		uc->last_cmd_sent = 0;
+	}
+
+	return ret;
 }
 
 static int ucsi_ccg_async_write(struct ucsi *ucsi, unsigned int offset,
@@ -339,12 +511,26 @@ static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset,
 			       const void *val, size_t val_len)
 {
 	struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi);
+	struct ucsi_connector *con;
+	int con_index;
 	int ret;
 
 	mutex_lock(&uc->lock);
 	pm_runtime_get_sync(uc->dev);
 	set_bit(DEV_CMD_PENDING, &uc->flags);
 
+	if (offset == UCSI_CONTROL && val_len == sizeof(uc->last_cmd_sent)) {
+		uc->last_cmd_sent = *(u64 *)val;
+
+		if (UCSI_COMMAND(uc->last_cmd_sent) == UCSI_SET_NEW_CAM &&
+		    uc->has_multiple_dp) {
+			con_index = (uc->last_cmd_sent >> 16) &
+				    UCSI_CMD_CONNECTOR_MASK;
+			con = &uc->ucsi->connector[con_index - 1];
+			ucsi_ccg_update_set_new_cam_cmd(uc, con, (u64 *)val);
+		}
+	}
+
 	ret = ucsi_ccg_async_write(ucsi, offset, val, val_len);
 	if (ret)
 		goto err_clear_bit;
@@ -363,7 +549,8 @@ err_clear_bit:
 static const struct ucsi_operations ucsi_ccg_ops = {
 	.read = ucsi_ccg_read,
 	.sync_write = ucsi_ccg_sync_write,
-	.async_write = ucsi_ccg_async_write
+	.async_write = ucsi_ccg_async_write,
+	.update_altmodes = ucsi_ccg_update_altmodes
 };
 
 static irqreturn_t ccg_irq_handler(int irq, void *data)