Merge tag 'asoc-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.3

Quite a few fixes here but they're all very small and driver specific,
none of them really stand out if you aren't using the relevant hardware
but they're all useful if you do happen to have an affected device.

27 files changed, 286 insertions, 175 deletions

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 867e9f3f3859..dcc50c878159 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -61,7 +61,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
 	{ .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data},
 	{ .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data},
-	{ .compatible = "fsl,imx6sx-usb", .data = &imx6sl_usb_data},
+	{ .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
index 9eae1a16cef9..4456d2cf80ff 100644
--- a/drivers/usb/chipidea/ci_hdrc_usb2.c
+++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
@@ -12,6 +12,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/usb/chipidea.h>
@@ -30,18 +31,36 @@ static const struct ci_hdrc_platform_data ci_default_pdata = {
 	.flags		= CI_HDRC_DISABLE_STREAMING,
 };
 
+static struct ci_hdrc_platform_data ci_zynq_pdata = {
+	.capoffset	= DEF_CAPOFFSET,
+};
+
+static const struct of_device_id ci_hdrc_usb2_of_match[] = {
+	{ .compatible = "chipidea,usb2"},
+	{ .compatible = "xlnx,zynq-usb-2.20a", .data = &ci_zynq_pdata},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
+
 static int ci_hdrc_usb2_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ci_hdrc_usb2_priv *priv;
 	struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev);
 	int ret;
+	const struct of_device_id *match;
 
 	if (!ci_pdata) {
 		ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL);
 		*ci_pdata = ci_default_pdata;	/* struct copy */
 	}
 
+	match = of_match_device(ci_hdrc_usb2_of_match, &pdev->dev);
+	if (match && match->data) {
+		/* struct copy */
+		*ci_pdata = *(struct ci_hdrc_platform_data *)match->data;
+	}
+
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -96,12 +115,6 @@ static int ci_hdrc_usb2_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id ci_hdrc_usb2_of_match[] = {
-	{ .compatible = "chipidea,usb2" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
-
 static struct platform_driver ci_hdrc_usb2_driver = {
 	.probe	= ci_hdrc_usb2_probe,
 	.remove	= ci_hdrc_usb2_remove,
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index a637da25dda0..8223fe73ea85 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -656,6 +656,44 @@ __acquires(hwep->lock)
 	return 0;
 }
 
+static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer)
+{
+	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+	int direction, retval = 0;
+	unsigned long flags;
+
+	if (ep == NULL || hwep->ep.desc == NULL)
+		return -EINVAL;
+
+	if (usb_endpoint_xfer_isoc(hwep->ep.desc))
+		return -EOPNOTSUPP;
+
+	spin_lock_irqsave(hwep->lock, flags);
+
+	if (value && hwep->dir == TX && check_transfer &&
+		!list_empty(&hwep->qh.queue) &&
+			!usb_endpoint_xfer_control(hwep->ep.desc)) {
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return -EAGAIN;
+	}
+
+	direction = hwep->dir;
+	do {
+		retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
+
+		if (!value)
+			hwep->wedge = 0;
+
+		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+			hwep->dir = (hwep->dir == TX) ? RX : TX;
+
+	} while (hwep->dir != direction);
+
+	spin_unlock_irqrestore(hwep->lock, flags);
+	return retval;
+}
+
+
 /**
  * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
  * @gadget: gadget
@@ -1051,7 +1089,7 @@ __acquires(ci->lock)
 				num += ci->hw_ep_max / 2;
 
 			spin_unlock(&ci->lock);
-			err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
+			err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false);
 			spin_lock(&ci->lock);
 			if (!err)
 				isr_setup_status_phase(ci);
@@ -1117,8 +1155,8 @@ delegate:
 
 	if (err < 0) {
 		spin_unlock(&ci->lock);
-		if (usb_ep_set_halt(&hwep->ep))
-			dev_err(ci->dev, "error: ep_set_halt\n");
+		if (_ep_set_halt(&hwep->ep, 1, false))
+			dev_err(ci->dev, "error: _ep_set_halt\n");
 		spin_lock(&ci->lock);
 	}
 }
@@ -1149,9 +1187,9 @@ __acquires(ci->lock)
 					err = isr_setup_status_phase(ci);
 				if (err < 0) {
 					spin_unlock(&ci->lock);
-					if (usb_ep_set_halt(&hwep->ep))
+					if (_ep_set_halt(&hwep->ep, 1, false))
 						dev_err(ci->dev,
-							"error: ep_set_halt\n");
+						"error: _ep_set_halt\n");
 					spin_lock(&ci->lock);
 				}
 			}
@@ -1397,41 +1435,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
  */
 static int ep_set_halt(struct usb_ep *ep, int value)
 {
-	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
-	int direction, retval = 0;
-	unsigned long flags;
-
-	if (ep == NULL || hwep->ep.desc == NULL)
-		return -EINVAL;
-
-	if (usb_endpoint_xfer_isoc(hwep->ep.desc))
-		return -EOPNOTSUPP;
-
-	spin_lock_irqsave(hwep->lock, flags);
-
-#ifndef STALL_IN
-	/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
-	if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX &&
-	    !list_empty(&hwep->qh.queue)) {
-		spin_unlock_irqrestore(hwep->lock, flags);
-		return -EAGAIN;
-	}
-#endif
-
-	direction = hwep->dir;
-	do {
-		retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
-
-		if (!value)
-			hwep->wedge = 0;
-
-		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
-			hwep->dir = (hwep->dir == TX) ? RX : TX;
-
-	} while (hwep->dir != direction);
-
-	spin_unlock_irqrestore(hwep->lock, flags);
-	return retval;
+	return _ep_set_halt(ep, value, true);
 }
 
 /**
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index b2a540b43f97..b9ddf0c1ffe5 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -112,7 +112,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
 		ep->ss_ep_comp.bmAttributes = 16;
 	} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
-			desc->bmAttributes > 2) {
+		   USB_SS_MULT(desc->bmAttributes) > 3) {
 		dev_warn(ddev, "Isoc endpoint has Mult of %d in "
 				"config %d interface %d altsetting %d ep %d: "
 				"setting to 3\n", desc->bmAttributes + 1,
@@ -121,7 +121,8 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 	}
 
 	if (usb_endpoint_xfer_isoc(&ep->desc))
-		max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
+		max_tx = (desc->bMaxBurst + 1) *
+			(USB_SS_MULT(desc->bmAttributes)) *
 			usb_endpoint_maxp(&ep->desc);
 	else if (usb_endpoint_xfer_int(&ep->desc))
 		max_tx = usb_endpoint_maxp(&ep->desc) *
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index a5a1b7c45743..22e9606d8e08 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -514,8 +514,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
-	dwc3_omap_enable_irqs(omap);
-
 	ret = dwc3_omap_extcon_register(omap);
 	if (ret < 0)
 		goto err2;
@@ -526,6 +524,8 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		goto err3;
 	}
 
+	dwc3_omap_enable_irqs(omap);
+
 	return 0;
 
 err3:
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0c25704dcb6b..1e8bdf817811 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2665,8 +2665,6 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
 	int				i;
 	irqreturn_t			ret = IRQ_NONE;
 
-	spin_lock(&dwc->lock);
-
 	for (i = 0; i < dwc->num_event_buffers; i++) {
 		irqreturn_t status;
 
@@ -2675,8 +2673,6 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
 			ret = status;
 	}
 
-	spin_unlock(&dwc->lock);
-
 	return ret;
 }
 
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 978435a51038..6399c106a3a5 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -186,6 +186,7 @@ void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
 		ep->claimed = false;
+		ep->driver_data = NULL;
 	}
 	gadget->in_epnum = 0;
 	gadget->out_epnum = 0;
diff --git a/drivers/usb/gadget/udc/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c
index fdacddb18c00..175ca93fe5e2 100644
--- a/drivers/usb/gadget/udc/amd5536udc.c
+++ b/drivers/usb/gadget/udc/amd5536udc.c
@@ -3138,8 +3138,8 @@ static void udc_pci_remove(struct pci_dev *pdev)
 	writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
 	if (dev->irq_registered)
 		free_irq(pdev->irq, dev);
-	if (dev->regs)
-		iounmap(dev->regs);
+	if (dev->virt_addr)
+		iounmap(dev->virt_addr);
 	if (dev->mem_region)
 		release_mem_region(pci_resource_start(pdev, 0),
 				pci_resource_len(pdev, 0));
@@ -3226,17 +3226,13 @@ static int udc_pci_probe(
 
 	/* init */
 	dev = kzalloc(sizeof(struct udc), GFP_KERNEL);
-	if (!dev) {
-		retval = -ENOMEM;
-		goto finished;
-	}
+	if (!dev)
+		return -ENOMEM;
 
 	/* pci setup */
 	if (pci_enable_device(pdev) < 0) {
-		kfree(dev);
-		dev = NULL;
 		retval = -ENODEV;
-		goto finished;
+		goto err_pcidev;
 	}
 	dev->active = 1;
 
@@ -3246,28 +3242,22 @@ static int udc_pci_probe(
 
 	if (!request_mem_region(resource, len, name)) {
 		dev_dbg(&pdev->dev, "pci device used already\n");
-		kfree(dev);
-		dev = NULL;
 		retval = -EBUSY;
-		goto finished;
+		goto err_memreg;
 	}
 	dev->mem_region = 1;
 
 	dev->virt_addr = ioremap_nocache(resource, len);
 	if (dev->virt_addr == NULL) {
 		dev_dbg(&pdev->dev, "start address cannot be mapped\n");
-		kfree(dev);
-		dev = NULL;
 		retval = -EFAULT;
-		goto finished;
+		goto err_ioremap;
 	}
 
 	if (!pdev->irq) {
 		dev_err(&pdev->dev, "irq not set\n");
-		kfree(dev);
-		dev = NULL;
 		retval = -ENODEV;
-		goto finished;
+		goto err_irq;
 	}
 
 	spin_lock_init(&dev->lock);
@@ -3283,10 +3273,8 @@ static int udc_pci_probe(
 
 	if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
 		dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
-		kfree(dev);
-		dev = NULL;
 		retval = -EBUSY;
-		goto finished;
+		goto err_irq;
 	}
 	dev->irq_registered = 1;
 
@@ -3314,8 +3302,17 @@ static int udc_pci_probe(
 		return 0;
 
 finished:
-	if (dev)
-		udc_pci_remove(pdev);
+	udc_pci_remove(pdev);
+	return retval;
+
+err_irq:
+	iounmap(dev->virt_addr);
+err_ioremap:
+	release_mem_region(resource, len);
+err_memreg:
+	pci_disable_device(pdev);
+err_pcidev:
+	kfree(dev);
 	return retval;
 }
 
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 3dfada8d6061..f0f2b066ac08 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2002,6 +2002,17 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 		ep->udc = udc;
 		INIT_LIST_HEAD(&ep->queue);
 
+		if (ep->index == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = ep->can_isoc;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+
 		if (i)
 			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
 
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 5c8f4effb62a..ccb9c213cc9f 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -324,8 +324,7 @@ static void bdc_mem_free(struct bdc *bdc)
 				bdc->scratchpad.buff, bdc->scratchpad.sp_dma);
 
 	/* Destroy the dma pools */
-	if (bdc->bd_table_pool)
-		dma_pool_destroy(bdc->bd_table_pool);
+	dma_pool_destroy(bdc->bd_table_pool);
 
 	/* Free the bdc_ep array */
 	kfree(bdc->bdc_ep_array);
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 1379ad40d864..27af0f008b57 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -1348,6 +1348,7 @@ static int transfer(struct dummy_hcd *dum_hcd, struct urb *urb,
 {
 	struct dummy		*dum = dum_hcd->dum;
 	struct dummy_request	*req;
+	int			sent = 0;
 
 top:
 	/* if there's no request queued, the device is NAKing; return */
@@ -1385,12 +1386,15 @@ top:
 			if (len == 0)
 				break;
 
-			/* use an extra pass for the final short packet */
-			if (len > ep->ep.maxpacket) {
-				rescan = 1;
-				len -= (len % ep->ep.maxpacket);
+			/* send multiple of maxpacket first, then remainder */
+			if (len >= ep->ep.maxpacket) {
+				is_short = 0;
+				if (len % ep->ep.maxpacket)
+					rescan = 1;
+				len -= len % ep->ep.maxpacket;
+			} else {
+				is_short = 1;
 			}
-			is_short = (len % ep->ep.maxpacket) != 0;
 
 			len = dummy_perform_transfer(urb, req, len);
 
@@ -1399,6 +1403,7 @@ top:
 				req->req.status = len;
 			} else {
 				limit -= len;
+				sent += len;
 				urb->actual_length += len;
 				req->req.actual += len;
 			}
@@ -1421,7 +1426,7 @@ top:
 					*status = -EOVERFLOW;
 				else
 					*status = 0;
-			} else if (!to_host) {
+			} else {
 				*status = 0;
 				if (host_len > dev_len)
 					req->req.status = -EOVERFLOW;
@@ -1429,15 +1434,24 @@ top:
 					req->req.status = 0;
 			}
 
-		/* many requests terminate without a short packet */
+		/*
+		 * many requests terminate without a short packet.
+		 * send a zlp if demanded by flags.
+		 */
 		} else {
-			if (req->req.length == req->req.actual
-					&& !req->req.zero)
-				req->req.status = 0;
-			if (urb->transfer_buffer_length == urb->actual_length
-					&& !(urb->transfer_flags
-						& URB_ZERO_PACKET))
-				*status = 0;
+			if (req->req.length == req->req.actual) {
+				if (req->req.zero && to_host)
+					rescan = 1;
+				else
+					req->req.status = 0;
+			}
+			if (urb->transfer_buffer_length == urb->actual_length) {
+				if (urb->transfer_flags & URB_ZERO_PACKET &&
+				    !to_host)
+					rescan = 1;
+				else
+					*status = 0;
+			}
 		}
 
 		/* device side completion --> continuable */
@@ -1460,7 +1474,7 @@ top:
 		if (rescan)
 			goto top;
 	}
-	return limit;
+	return sent;
 }
 
 static int periodic_bytes(struct dummy *dum, struct dummy_ep *ep)
@@ -1890,7 +1904,7 @@ restart:
 		default:
 treat_control_like_bulk:
 			ep->last_io = jiffies;
-			total = transfer(dum_hcd, urb, ep, limit, &status);
+			total -= transfer(dum_hcd, urb, ep, limit, &status);
 			break;
 		}
 
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index 8aa2593c2c36..b9429bc42511 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -2117,8 +2117,7 @@ static int gr_remove(struct platform_device *pdev)
 		return -EBUSY;
 
 	gr_dfs_delete(dev);
-	if (dev->desc_pool)
-		dma_pool_destroy(dev->desc_pool);
+	dma_pool_destroy(dev->desc_pool);
 	platform_set_drvdata(pdev, NULL);
 
 	gr_free_request(&dev->epi[0].ep, &dev->ep0reqi->req);
diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
index 4c489692745e..dafe74eb9ade 100644
--- a/drivers/usb/gadget/udc/mv_u3d_core.c
+++ b/drivers/usb/gadget/udc/mv_u3d_core.c
@@ -1767,8 +1767,7 @@ static int mv_u3d_remove(struct platform_device *dev)
 	usb_del_gadget_udc(&u3d->gadget);
 
 	/* free memory allocated in probe */
-	if (u3d->trb_pool)
-		dma_pool_destroy(u3d->trb_pool);
+	dma_pool_destroy(u3d->trb_pool);
 
 	if (u3d->ep_context)
 		dma_free_coherent(&dev->dev, u3d->ep_context_size,
diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
index 339af51df57d..81b6229c7805 100644
--- a/drivers/usb/gadget/udc/mv_udc_core.c
+++ b/drivers/usb/gadget/udc/mv_udc_core.c
@@ -2100,8 +2100,7 @@ static int mv_udc_remove(struct platform_device *pdev)
 	}
 
 	/* free memory allocated in probe */
-	if (udc->dtd_pool)
-		dma_pool_destroy(udc->dtd_pool);
+	dma_pool_destroy(udc->dtd_pool);
 
 	if (udc->ep_dqh)
 		dma_free_coherent(&pdev->dev, udc->ep_dqh_size,
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 9a8c936cd42c..41f841fa6c4d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1498,10 +1498,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	 * use Event Data TRBs, and we don't chain in a link TRB on short
 	 * transfers, we're basically dividing by 1.
 	 *
-	 * xHCI 1.0 specification indicates that the Average TRB Length should
-	 * be set to 8 for control endpoints.
+	 * xHCI 1.0 and 1.1 specification indicates that the Average TRB Length
+	 * should be set to 8 for control endpoints.
 	 */
-	if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version == 0x100)
+	if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100)
 		ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(8));
 	else
 		ep_ctx->tx_info |=
@@ -1792,8 +1792,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	int size;
 	int i, j, num_ports;
 
-	if (timer_pending(&xhci->cmd_timer))
-		del_timer_sync(&xhci->cmd_timer);
+	del_timer_sync(&xhci->cmd_timer);
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -2321,6 +2320,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 	INIT_LIST_HEAD(&xhci->cmd_list);
 
+	/* init command timeout timer */
+	setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
+		    (unsigned long)xhci);
+
 	page_size = readl(&xhci->op_regs->page_size);
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"Supported page size register = 0x%x", page_size);
@@ -2505,10 +2508,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 			"Wrote ERST address to ir_set 0.");
 	xhci_print_ir_set(xhci, 0);
 
-	/* init command timeout timer */
-	setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
-		    (unsigned long)xhci);
-
 	/*
 	 * XXX: Might need to set the Interrupter Moderation Register to
 	 * something other than the default (~1ms minimum between interrupts).
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 5590eac2b22d..c79d33676672 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -180,51 +180,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 				"QUIRK: Resetting on resume");
 }
 
-/*
- * In some Intel xHCI controllers, in order to get D3 working,
- * through a vendor specific SSIC CONFIG register at offset 0x883c,
- * SSIC PORT need to be marked as "unused" before putting xHCI
- * into D3. After D3 exit, the SSIC port need to be marked as "used".
- * Without this change, xHCI might not enter D3 state.
- * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
- * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
- */
-static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
-{
-	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	u32 val;
-	void __iomem *reg;
-
-	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
-		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
-
-		reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
-
-		/* Notify SSIC that SSIC profile programming is not done */
-		val = readl(reg) & ~PROG_DONE;
-		writel(val, reg);
-
-		/* Mark SSIC port as unused(suspend) or used(resume) */
-		val = readl(reg);
-		if (suspend)
-			val |= SSIC_PORT_UNUSED;
-		else
-			val &= ~SSIC_PORT_UNUSED;
-		writel(val, reg);
-
-		/* Notify SSIC that SSIC profile programming is done */
-		val = readl(reg) | PROG_DONE;
-		writel(val, reg);
-		readl(reg);
-	}
-
-	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
-	val = readl(reg);
-	writel(val | BIT(28), reg);
-	readl(reg);
-}
-
 #ifdef CONFIG_ACPI
 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
 {
@@ -345,6 +300,51 @@ static void xhci_pci_remove(struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PM
+/*
+ * In some Intel xHCI controllers, in order to get D3 working,
+ * through a vendor specific SSIC CONFIG register at offset 0x883c,
+ * SSIC PORT need to be marked as "unused" before putting xHCI
+ * into D3. After D3 exit, the SSIC port need to be marked as "used".
+ * Without this change, xHCI might not enter D3 state.
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	u32 val;
+	void __iomem *reg;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
+
+		reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
+
+		/* Notify SSIC that SSIC profile programming is not done */
+		val = readl(reg) & ~PROG_DONE;
+		writel(val, reg);
+
+		/* Mark SSIC port as unused(suspend) or used(resume) */
+		val = readl(reg);
+		if (suspend)
+			val |= SSIC_PORT_UNUSED;
+		else
+			val &= ~SSIC_PORT_UNUSED;
+		writel(val, reg);
+
+		/* Notify SSIC that SSIC profile programming is done */
+		val = readl(reg) | PROG_DONE;
+		writel(val, reg);
+		readl(reg);
+	}
+
+	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+	val = readl(reg);
+	writel(val | BIT(28), reg);
+	readl(reg);
+}
+
 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a47a1e897086..43291f93afeb 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -302,6 +302,15 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
 	ret = xhci_handshake(&xhci->op_regs->cmd_ring,
 			CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
 	if (ret < 0) {
+		/* we are about to kill xhci, give it one more chance */
+		xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
+			      &xhci->op_regs->cmd_ring);
+		udelay(1000);
+		ret = xhci_handshake(&xhci->op_regs->cmd_ring,
+				     CMD_RING_RUNNING, 0, 3 * 1000 * 1000);
+		if (ret == 0)
+			return 0;
+
 		xhci_err(xhci, "Stopped the command ring failed, "
 				"maybe the host is dead\n");
 		xhci->xhc_state |= XHCI_STATE_DYING;
@@ -3461,8 +3470,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	if (start_cycle == 0)
 		field |= 0x1;
 
-	/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
-	if (xhci->hci_version == 0x100) {
+	/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
+	if (xhci->hci_version >= 0x100) {
 		if (urb->transfer_buffer_length > 0) {
 			if (setup->bRequestType & USB_DIR_IN)
 				field |= TRB_TX_TYPE(TRB_DATA_IN);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6b0f4a47e402..9957bd96d4bc 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -146,7 +146,8 @@ static int xhci_start(struct xhci_hcd *xhci)
 				"waited %u microseconds.\n",
 				XHCI_MAX_HALT_USEC);
 	if (!ret)
-		xhci->xhc_state &= ~XHCI_STATE_HALTED;
+		xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING);
+
 	return ret;
 }
 
@@ -654,15 +655,6 @@ int xhci_run(struct usb_hcd *hcd)
 }
 EXPORT_SYMBOL_GPL(xhci_run);
 
-static void xhci_only_stop_hcd(struct usb_hcd *hcd)
-{
-	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-
-	spin_lock_irq(&xhci->lock);
-	xhci_halt(xhci);
-	spin_unlock_irq(&xhci->lock);
-}
-
 /*
  * Stop xHCI driver.
  *
@@ -677,12 +669,14 @@ void xhci_stop(struct usb_hcd *hcd)
 	u32 temp;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
-	if (!usb_hcd_is_primary_hcd(hcd)) {
-		xhci_only_stop_hcd(xhci->shared_hcd);
+	if (xhci->xhc_state & XHCI_STATE_HALTED)
 		return;
-	}
 
+	mutex_lock(&xhci->mutex);
 	spin_lock_irq(&xhci->lock);
+	xhci->xhc_state |= XHCI_STATE_HALTED;
+	xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+
 	/* Make sure the xHC is halted for a USB3 roothub
 	 * (xhci_stop() could be called as part of failed init).
 	 */
@@ -717,6 +711,7 @@ void xhci_stop(struct usb_hcd *hcd)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"xhci_stop completed - status = %x",
 			readl(&xhci->op_regs->status));
+	mutex_unlock(&xhci->mutex);
 }
 
 /*
@@ -3793,6 +3788,9 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 
 	mutex_lock(&xhci->mutex);
 
+	if (xhci->xhc_state)	/* dying or halted */
+		goto out;
+
 	if (!udev->slot_id) {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
 				"Bad Slot ID %d", udev->slot_id);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 514a6cdaeff6..4a518ff12310 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1051,6 +1051,7 @@ void musb_start(struct musb *musb)
 	 * (c) peripheral initiates, using SRP
 	 */
 	if (musb->port_mode != MUSB_PORT_MODE_HOST &&
+			musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON &&
 			(devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
 		musb->is_active = 1;
 	} else {
@@ -2448,6 +2449,9 @@ static int musb_suspend(struct device *dev)
 	struct musb	*musb = dev_to_musb(dev);
 	unsigned long	flags;
 
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+
 	spin_lock_irqsave(&musb->lock, flags);
 
 	if (is_peripheral_active(musb)) {
@@ -2501,6 +2505,9 @@ static int musb_resume(struct device *dev)
 	pm_runtime_disable(dev);
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
+
+	musb_start(musb);
+
 	return 0;
 }
 
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index d07cafb7d5f5..e499b862a946 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -551,6 +551,9 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel)
 	} else {
 		cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE);
 
+		/* delay to drain to cppi dma pipeline for isoch */
+		udelay(250);
+
 		csr = musb_readw(epio, MUSB_RXCSR);
 		csr &= ~(MUSB_RXCSR_H_REQPKT | MUSB_RXCSR_DMAENAB);
 		musb_writew(epio, MUSB_RXCSR, csr);
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index a0cfead6150f..84512d1d5eee 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -225,8 +225,11 @@ static void dsps_musb_enable(struct musb *musb)
 
 	dsps_writel(reg_base, wrp->epintr_set, epmask);
 	dsps_writel(reg_base, wrp->coreintr_set, coremask);
-	/* start polling for ID change. */
-	mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout));
+	/* start polling for ID change in dual-role idle mode */
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
+			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 	dsps_musb_try_idle(musb, 0);
 }
 
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 39168fe9b406..b2685e75a683 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -379,6 +379,8 @@ static const struct of_device_id ux500_match[] = {
         {}
 };
 
+MODULE_DEVICE_TABLE(of, ux500_match);
+
 static struct platform_driver ux500_driver = {
 	.probe		= ux500_probe,
 	.remove		= ux500_remove,
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 7d3beee2a587..173132416170 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -155,7 +155,7 @@ config USB_MSM_OTG
 config USB_QCOM_8X16_PHY
 	tristate "Qualcomm APQ8016/MSM8916 on-chip USB PHY controller support"
 	depends on ARCH_QCOM || COMPILE_TEST
-	depends on RESET_CONTROLLER
+	depends on RESET_CONTROLLER && EXTCON
 	select USB_PHY
 	select USB_ULPI_VIEWPORT
 	help
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index ec6ecd03269c..5320cb8642cb 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -232,7 +232,8 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 		clk_rate = pdata->clk_rate;
 		needs_vcc = pdata->needs_vcc;
 		if (gpio_is_valid(pdata->gpio_reset)) {
-			err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
+			err = devm_gpio_request_one(dev, pdata->gpio_reset,
+						    GPIOF_ACTIVE_LOW,
 						    dev_name(dev));
 			if (!err)
 				nop->gpiod_reset =
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index 8a55b37d1a02..db68156568e6 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -31,6 +31,7 @@ static const struct i2c_device_id isp1301_id[] = {
 	{ "isp1301", 0 },
 	{ }
 };
+MODULE_DEVICE_TABLE(i2c, isp1301_id);
 
 static struct i2c_client *isp1301_i2c_client;
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6d1941a2396a..6956c4f62216 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -278,6 +278,10 @@ static void option_instat_callback(struct urb *urb);
 #define ZTE_PRODUCT_MF622			0x0001
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
+#define ZTE_PRODUCT_ZM8620_X			0x0396
+#define ZTE_PRODUCT_ME3620_MBIM			0x0426
+#define ZTE_PRODUCT_ME3620_X			0x1432
+#define ZTE_PRODUCT_ME3620_L			0x1433
 #define ZTE_PRODUCT_AC2726			0xfff1
 #define ZTE_PRODUCT_MG880			0xfffd
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
@@ -544,6 +548,18 @@ static const struct option_blacklist_info zte_mc2716_z_blacklist = {
 	.sendsetup = BIT(1) | BIT(2) | BIT(3),
 };
 
+static const struct option_blacklist_info zte_me3620_mbim_blacklist = {
+	.reserved = BIT(2) | BIT(3) | BIT(4),
+};
+
+static const struct option_blacklist_info zte_me3620_xl_blacklist = {
+	.reserved = BIT(3) | BIT(4) | BIT(5),
+};
+
+static const struct option_blacklist_info zte_zm8620_x_blacklist = {
+	.reserved = BIT(3) | BIT(4) | BIT(5),
+};
+
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
@@ -1591,6 +1607,14 @@ static const struct usb_device_id option_ids[] = {
 	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
 	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_L),
+	 .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_MBIM),
+	 .driver_info = (kernel_ulong_t)&zte_me3620_mbim_blacklist },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_X),
+	 .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ZM8620_X),
+	 .driver_info = (kernel_ulong_t)&zte_zm8620_x_blacklist },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 6c3734d2b45a..d3ea90bef84d 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -80,6 +80,8 @@ static int  whiteheat_firmware_download(struct usb_serial *serial,
 static int  whiteheat_firmware_attach(struct usb_serial *serial);
 
 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
+static int whiteheat_probe(struct usb_serial *serial,
+				const struct usb_device_id *id);
 static int  whiteheat_attach(struct usb_serial *serial);
 static void whiteheat_release(struct usb_serial *serial);
 static int  whiteheat_port_probe(struct usb_serial_port *port);
@@ -116,6 +118,7 @@ static struct usb_serial_driver whiteheat_device = {
 	.description =		"Connect Tech - WhiteHEAT",
 	.id_table =		id_table_std,
 	.num_ports =		4,
+	.probe =		whiteheat_probe,
 	.attach =		whiteheat_attach,
 	.release =		whiteheat_release,
 	.port_probe =		whiteheat_port_probe,
@@ -217,6 +220,34 @@ static int whiteheat_firmware_attach(struct usb_serial *serial)
 /*****************************************************************************
  * Connect Tech's White Heat serial driver functions
  *****************************************************************************/
+
+static int whiteheat_probe(struct usb_serial *serial,
+				const struct usb_device_id *id)
+{
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	size_t num_bulk_in = 0;
+	size_t num_bulk_out = 0;
+	size_t min_num_bulk;
+	unsigned int i;
+
+	iface_desc = serial->interface->cur_altsetting;
+
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+		endpoint = &iface_desc->endpoint[i].desc;
+		if (usb_endpoint_is_bulk_in(endpoint))
+			++num_bulk_in;
+		if (usb_endpoint_is_bulk_out(endpoint))
+			++num_bulk_out;
+	}
+
+	min_num_bulk = COMMAND_PORT + 1;
+	if (num_bulk_in < min_num_bulk || num_bulk_out < min_num_bulk)
+		return -ENODEV;
+
+	return 0;
+}
+
 static int whiteheat_attach(struct usb_serial *serial)
 {
 	struct usb_serial_port *command_port;