omapfb: copy omapdss & displays for omapfb

This patch makes a copy of the omapdss driver and the omap panel &
encoder drivers for omapfb. The purpose is to separate omapdrm and
omapfb drivers from each other.

Note that this patch only does a direct copy of the files without any
other modifications. The files are not yet used.

The original files are in:

drivers/video/fbdev/omap2/dss/
drivers/video/fbdev/omap2/displays-new/

Here's a more detailed explanation about this and the following patches,
from the introduction mail of the patch series:

A short background on the current status. We have the following
entities:

* omapdss, located in drivers/video/fbdev/omap2/dss/. This is a driver for the
  display subsystem IPs used on OMAP (and related) SoCs. It offers only a
  kernel internal API, and does not implement anything for fbdev or drm.

* omapdss panels and encoders, located in
  drivers/video/fbdev/omap2/displays-new/. These are panel and external encoder
  drivers, which use APIs offered by omapdss driver. These also don't implement
  anything for fbdev or drm.

* omapdrm, located in drivers/gpu/drm/omapdrm/. This is a drm driver, which
  uses omapdss and the panel/encoder drivers to operate the hardware.

* omapfb, located in drivers/video/fbdev/omap2/omapfb/. This is an fbdev
  driver, which uses omapdss and the panel/encoder drivers to operate the
  hardware.

* omap_vout, located in drivers/media/platform/omap/. This is a v4l2 driver,
  which uses omapdss and omapfb to implement a v4l2 API for the video overlays.

So, on the top level, we have either omapdrm, or omapfb+omap_vout. Both of
those use the same low level drivers. Without going to the historical details
why the architecture is like that, I think it's finally time to change that.

The situation with omapfb+omap_vout is that it still works, but no new features
have been added for a long time, and I want to keep it working as it's still
being used.  At some point in the future I'd like to remove omapfb and
omap_vout altogether.

Omapdrm, on the other hand, is being actively developed. Sharing the low level
parts with omapfb makes that development more difficult than it should be. It
also "hides" half of the development, as everything happening in the low level
parts resides under fbdev directory, not in the drm directory.

I've been wanting to clean this up for a long time, but I haven't figured out a
very good way to do it. I still haven't, but here's the best way I have come up
with.

This series makes a full copy of the low level parts, omapdss and panel/encoder
drivers. Both omapfb+omap_vout and omapdrm will have their own versions. The
copy omapfb+omap_vout get is a new copy, and the copy that omapdrm gets is just
the current files moved. This way git will associate the omapdrm version with
the old files.

The omapfb+omap_vout versions won't be touched unless there are some big issues
there.

The omapdrm versions can be refactored and cleaned up, as the omapfb support
code is no longer needed. We can perhaps also merge omapdss and omapdrm into
the same kernel module.

This series only does the copy, and the absolutely necessary parts. No further
cleanups are done yet.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>

1 files changed, 437 insertions, 0 deletions

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
new file mode 100644
index 000000000000..8a928c9a2fc9
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
@@ -0,0 +1,437 @@
+/*
+ * NEC NL8048HL11 Panel driver
+ *
+ * Copyright (C) 2010 Texas Instruments Inc.
+ * Author: Erik Gilling <konkers@android.com>
+ * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device	dssdev;
+	struct omap_dss_device *in;
+
+	struct omap_video_timings videomode;
+
+	int data_lines;
+
+	int res_gpio;
+	int qvga_gpio;
+
+	struct spi_device *spi;
+};
+
+#define LCD_XRES		800
+#define LCD_YRES		480
+/*
+ * NEC PIX Clock Ratings
+ * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
+ */
+#define LCD_PIXEL_CLOCK		23800000
+
+static const struct {
+	unsigned char addr;
+	unsigned char dat;
+} nec_8048_init_seq[] = {
+	{ 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 },
+	{ 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 },
+	{ 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 },	{ 24, 0x25 },
+	{ 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F },
+	{ 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F },	{ 38, 0x0F },
+	{ 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 },	{ 43, 0x0F },
+	{ 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F },	{ 48, 0x0F },
+	{ 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
+	{ 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 },	{ 86, 0x14 },
+	{ 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 },	{ 93, 0x0C },
+	{ 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 },
+	{ 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 },
+	{ 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 },
+	{ 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 },
+	{ 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC },
+	{ 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 },
+	{ 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 },
+	{ 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 },
+};
+
+static const struct omap_video_timings nec_8048_panel_timings = {
+	.x_res		= LCD_XRES,
+	.y_res		= LCD_YRES,
+	.pixelclock	= LCD_PIXEL_CLOCK,
+	.hfp		= 6,
+	.hsw		= 1,
+	.hbp		= 4,
+	.vfp		= 3,
+	.vsw		= 1,
+	.vbp		= 4,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr,
+			unsigned char reg_data)
+{
+	int ret = 0;
+	unsigned int cmd = 0, data = 0;
+
+	cmd = 0x0000 | reg_addr; /* register address write */
+	data = 0x0100 | reg_data; /* register data write */
+	data = (cmd << 16) | data;
+
+	ret = spi_write(spi, (unsigned char *)&data, 4);
+	if (ret)
+		pr_err("error in spi_write %x\n", data);
+
+	return ret;
+}
+
+static int init_nec_8048_wvga_lcd(struct spi_device *spi)
+{
+	unsigned int i;
+	/* Initialization Sequence */
+	/* nec_8048_spi_send(spi, REG, VAL) */
+	for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++)
+		nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
+				nec_8048_init_seq[i].dat);
+	udelay(20);
+	nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
+				nec_8048_init_seq[i].dat);
+	return 0;
+}
+
+static int nec_8048_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void nec_8048_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int nec_8048_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	if (gpio_is_valid(ddata->res_gpio))
+		gpio_set_value_cansleep(ddata->res_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void nec_8048_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (gpio_is_valid(ddata->res_gpio))
+		gpio_set_value_cansleep(ddata->res_gpio, 0);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void nec_8048_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void nec_8048_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int nec_8048_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver nec_8048_ops = {
+	.connect	= nec_8048_connect,
+	.disconnect	= nec_8048_disconnect,
+
+	.enable		= nec_8048_enable,
+	.disable	= nec_8048_disable,
+
+	.set_timings	= nec_8048_set_timings,
+	.get_timings	= nec_8048_get_timings,
+	.check_timings	= nec_8048_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+
+static int nec_8048_probe_pdata(struct spi_device *spi)
+{
+	const struct panel_nec_nl8048hl11_platform_data *pdata;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&spi->dev);
+
+	ddata->qvga_gpio = pdata->qvga_gpio;
+	ddata->res_gpio = pdata->res_gpio;
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&spi->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int nec_8048_probe_of(struct spi_device *spi)
+{
+	struct device_node *node = spi->dev.of_node;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *in;
+	int gpio;
+
+	gpio = of_get_named_gpio(node, "reset-gpios", 0);
+	if (!gpio_is_valid(gpio)) {
+		dev_err(&spi->dev, "failed to parse enable gpio\n");
+		return gpio;
+	}
+	ddata->res_gpio = gpio;
+
+	/* XXX the panel spec doesn't mention any QVGA pin?? */
+	ddata->qvga_gpio = -ENOENT;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int nec_8048_probe(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	spi->mode = SPI_MODE_0;
+	spi->bits_per_word = 32;
+
+	r = spi_setup(spi);
+	if (r < 0) {
+		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
+		return r;
+	}
+
+	init_nec_8048_wvga_lcd(spi);
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, ddata);
+
+	ddata->spi = spi;
+
+	if (dev_get_platdata(&spi->dev)) {
+		r = nec_8048_probe_pdata(spi);
+		if (r)
+			return r;
+	} else if (spi->dev.of_node) {
+		r = nec_8048_probe_of(spi);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->qvga_gpio)) {
+		r = devm_gpio_request_one(&spi->dev, ddata->qvga_gpio,
+				GPIOF_OUT_INIT_HIGH, "lcd QVGA");
+		if (r)
+			goto err_gpio;
+	}
+
+	if (gpio_is_valid(ddata->res_gpio)) {
+		r = devm_gpio_request_one(&spi->dev, ddata->res_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd RES");
+		if (r)
+			goto err_gpio;
+	}
+
+	ddata->videomode = nec_8048_panel_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &spi->dev;
+	dssdev->driver = &nec_8048_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&spi->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int nec_8048_remove(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+	omapdss_unregister_display(dssdev);
+
+	nec_8048_disable(dssdev);
+	nec_8048_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int nec_8048_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	nec_8048_spi_send(spi, 2, 0x01);
+	mdelay(40);
+
+	return 0;
+}
+
+static int nec_8048_resume(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	/* reinitialize the panel */
+	spi_setup(spi);
+	nec_8048_spi_send(spi, 2, 0x00);
+	init_nec_8048_wvga_lcd(spi);
+
+	return 0;
+}
+static SIMPLE_DEV_PM_OPS(nec_8048_pm_ops, nec_8048_suspend,
+		nec_8048_resume);
+#define NEC_8048_PM_OPS (&nec_8048_pm_ops)
+#else
+#define NEC_8048_PM_OPS NULL
+#endif
+
+static const struct of_device_id nec_8048_of_match[] = {
+	{ .compatible = "omapdss,nec,nl8048hl11", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, nec_8048_of_match);
+
+static struct spi_driver nec_8048_driver = {
+	.driver = {
+		.name	= "panel-nec-nl8048hl11",
+		.pm	= NEC_8048_PM_OPS,
+		.of_match_table = nec_8048_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe	= nec_8048_probe,
+	.remove	= nec_8048_remove,
+};
+
+module_spi_driver(nec_8048_driver);
+
+MODULE_ALIAS("spi:nec,nl8048hl11");
+MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
+MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
+MODULE_LICENSE("GPL");