Merge commit 'v3.15' into next

501 files changed, 4466 insertions, 7771 deletions

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index dade5b7699bc..c7b4f0f927b1 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -21,2509 +21,34 @@ source "drivers/gpu/vga/Kconfig"
 
 source "drivers/gpu/host1x/Kconfig"
 
+menu "Direct Rendering Manager"
 source "drivers/gpu/drm/Kconfig"
+endmenu
+
+menu "Frame buffer Devices"
+source "drivers/video/fbdev/Kconfig"
+endmenu
+
+source "drivers/video/backlight/Kconfig"
 
 config VGASTATE
        tristate
        default n
 
-config VIDEO_OUTPUT_CONTROL
-	tristate "Lowlevel video output switch controls"
-	help
-	  This framework adds support for low-level control of the video 
-	  output switch.
-
 config VIDEOMODE_HELPERS
 	bool
 
 config HDMI
 	bool
 
-menuconfig FB
-	tristate "Support for frame buffer devices"
-	---help---
-	  The frame buffer device provides an abstraction for the graphics
-	  hardware. It represents the frame buffer of some video hardware and
-	  allows application software to access the graphics hardware through
-	  a well-defined interface, so the software doesn't need to know
-	  anything about the low-level (hardware register) stuff.
-
-	  Frame buffer devices work identically across the different
-	  architectures supported by Linux and make the implementation of
-	  application programs easier and more portable; at this point, an X
-	  server exists which uses the frame buffer device exclusively.
-	  On several non-X86 architectures, the frame buffer device is the
-	  only way to use the graphics hardware.
-
-	  The device is accessed through special device nodes, usually located
-	  in the /dev directory, i.e. /dev/fb*.
-
-	  You need an utility program called fbset to make full use of frame
-	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-	  and the Framebuffer-HOWTO at
-	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
-	  information.
-
-	  Say Y here and to the driver for your graphics board below if you
-	  are compiling a kernel for a non-x86 architecture.
-
-	  If you are compiling for the x86 architecture, you can say Y if you
-	  want to play with it, but it is not essential. Please note that
-	  running graphical applications that directly touch the hardware
-	  (e.g. an accelerated X server) and that are not frame buffer
-	  device-aware may cause unexpected results. If unsure, say N.
-
-config FIRMWARE_EDID
-       bool "Enable firmware EDID"
-       depends on FB
-       default n
-       ---help---
-         This enables access to the EDID transferred from the firmware.
-	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
-	 transfers do not work for your driver and if you are using
-	 nvidiafb, i810fb or savagefb.
-
-	 In general, choosing Y for this option is safe.  If you
-	 experience extremely long delays while booting before you get
-	 something on your display, try setting this to N.  Matrox cards in
-	 combination with certain motherboards and monitors are known to
-	 suffer from this problem.
-
-config FB_DDC
-       tristate
-       depends on FB
-       select I2C_ALGOBIT
-       select I2C
-       default n
-
-config FB_BOOT_VESA_SUPPORT
-	bool
-	depends on FB
-	default n
-	---help---
-	  If true, at least one selected framebuffer driver can take advantage
-	  of VESA video modes set at an early boot stage via the vga= parameter.
-
-config FB_CFB_FILLRECT
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the cfb_fillrect function for generic software rectangle
-	  filling. This is used by drivers that don't provide their own
-	  (accelerated) version.
-
-config FB_CFB_COPYAREA
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the cfb_copyarea function for generic software area copying.
-	  This is used by drivers that don't provide their own (accelerated)
-	  version.
-
-config FB_CFB_IMAGEBLIT
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the cfb_imageblit function for generic software image
-	  blitting. This is used by drivers that don't provide their own
-	  (accelerated) version.
-
-config FB_CFB_REV_PIXELS_IN_BYTE
-	bool
-	depends on FB
-	default n
-	---help---
-	  Allow generic frame-buffer functions to work on displays with 1, 2
-	  and 4 bits per pixel depths which has opposite order of pixels in
-	  byte order to bytes in long order.
-
-config FB_SYS_FILLRECT
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the sys_fillrect function for generic software rectangle
-	  filling. This is used by drivers that don't provide their own
-	  (accelerated) version and the framebuffer is in system RAM.
-
-config FB_SYS_COPYAREA
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the sys_copyarea function for generic software area copying.
-	  This is used by drivers that don't provide their own (accelerated)
-	  version and the framebuffer is in system RAM.
-
-config FB_SYS_IMAGEBLIT
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the sys_imageblit function for generic software image
-	  blitting. This is used by drivers that don't provide their own
-	  (accelerated) version and the framebuffer is in system RAM.
-
-menuconfig FB_FOREIGN_ENDIAN
-	bool "Framebuffer foreign endianness support"
-	depends on FB
-	---help---
-	  This menu will let you enable support for the framebuffers with
-	  non-native endianness (e.g. Little-Endian framebuffer on a
-	  Big-Endian machine). Most probably you don't have such hardware,
-	  so it's safe to say "n" here.
-
-choice
-	prompt "Choice endianness support"
-	depends on FB_FOREIGN_ENDIAN
-
-config FB_BOTH_ENDIAN
-	bool "Support for Big- and Little-Endian framebuffers"
-
-config FB_BIG_ENDIAN
-	bool "Support for Big-Endian framebuffers only"
-
-config FB_LITTLE_ENDIAN
-	bool "Support for Little-Endian framebuffers only"
-
-endchoice
-
-config FB_SYS_FOPS
-       tristate
-       depends on FB
-       default n
-
-config FB_DEFERRED_IO
-	bool
-	depends on FB
-
-config FB_HECUBA
-	tristate
-	depends on FB
-	depends on FB_DEFERRED_IO
-
-config FB_SVGALIB
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Common utility functions useful to fbdev drivers of VGA-based
-	  cards.
-
-config FB_MACMODES
-       tristate
-       depends on FB
-       default n
-
-config FB_BACKLIGHT
-	bool
-	depends on FB
-	select BACKLIGHT_LCD_SUPPORT
-	select BACKLIGHT_CLASS_DEVICE
-	default n
-
-config FB_MODE_HELPERS
-        bool "Enable Video Mode Handling Helpers"
-        depends on FB
-	default n
-	---help---
-	  This enables functions for handling video modes using the
-	  Generalized Timing Formula and the EDID parser. A few drivers rely
-          on this feature such as the radeonfb, rivafb, and the i810fb. If
-	  your driver does not take advantage of this feature, choosing Y will
-	  just increase the kernel size by about 5K.
-
-config FB_TILEBLITTING
-       bool "Enable Tile Blitting Support"
-       depends on FB
-       default n
-       ---help---
-         This enables tile blitting.  Tile blitting is a drawing technique
-	 where the screen is divided into rectangular sections (tiles), whereas
-	 the standard blitting divides the screen into pixels. Because the
-	 default drawing element is a tile, drawing functions will be passed
-	 parameters in terms of number of tiles instead of number of pixels.
-	 For example, to draw a single character, instead of using bitmaps,
-	 an index to an array of bitmaps will be used.  To clear or move a
-	 rectangular section of a screen, the rectangle will be described in
-	 terms of number of tiles in the x- and y-axis.
-
-	 This is particularly important to one driver, matroxfb.  If
-	 unsure, say N.
-
-comment "Frame buffer hardware drivers"
-	depends on FB
-
-config FB_GRVGA
-	tristate "Aeroflex Gaisler framebuffer support"
-	depends on FB && SPARC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
-
-config FB_CIRRUS
-	tristate "Cirrus Logic support"
-	depends on FB && (ZORRO || PCI)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  This enables support for Cirrus Logic GD542x/543x based boards on
-	  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
-
-	  If you have a PCI-based system, this enables support for these
-	  chips: GD-543x, GD-544x, GD-5480.
-
-	  Please read the file <file:Documentation/fb/cirrusfb.txt>.
-
-	  Say N unless you have such a graphics board or plan to get one
-	  before you next recompile the kernel.
-
-config FB_PM2
-	tristate "Permedia2 support"
-	depends on FB && ((AMIGA && BROKEN) || PCI)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for cards based on
-	  the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
-	  The driver was tested on the following cards:
-		Diamond FireGL 1000 PRO AGP
-		ELSA Gloria Synergy PCI
-		Appian Jeronimo PRO (both heads) PCI
-		3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
-		Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
-		ASK Graphic Blaster Exxtreme AGP
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called pm2fb.
-
-config FB_PM2_FIFO_DISCONNECT
-	bool "enable FIFO disconnect feature"
-	depends on FB_PM2 && PCI
-	help
-	  Support the Permedia2 FIFO disconnect feature.
-
-config FB_ARMCLCD
-	tristate "ARM PrimeCell PL110 support"
-	depends on ARM || ARM64 || COMPILE_TEST
-	depends on FB && ARM_AMBA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This framebuffer device driver is for the ARM PrimeCell PL110
-	  Colour LCD controller.  ARM PrimeCells provide the building
-	  blocks for System on a Chip devices.
-
-	  If you want to compile this as a module (=code which can be
-	  inserted into and removed from the running kernel), say M
-	  here and read <file:Documentation/kbuild/modules.txt>.  The module
-	  will be called amba-clcd.
-
-config FB_ACORN
-	bool "Acorn VIDC support"
-	depends on (FB = y) && ARM && ARCH_ACORN
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Acorn VIDC graphics
-	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
-	  unsure, say N.
-
-config FB_CLPS711X
-	bool "CLPS711X LCD support"
-	depends on (FB = y) && ARM && ARCH_CLPS711X
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Say Y to enable the Framebuffer driver for the CLPS7111 and
-	  EP7212 processors.
-
-config FB_SA1100
-	bool "SA-1100 LCD support"
-	depends on (FB = y) && ARM && ARCH_SA1100
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is a framebuffer device for the SA-1100 LCD Controller.
-	  See <http://www.linux-fbdev.org/> for information on framebuffer
-	  devices.
-
-	  If you plan to use the LCD display with your SA-1100 system, say
-	  Y here.
-
-config FB_IMX
-	tristate "Freescale i.MX1/21/25/27 LCD support"
-	depends on FB && ARCH_MXC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-
-config FB_CYBER2000
-	tristate "CyberPro 2000/2010/5000 support"
-	depends on FB && PCI && (BROKEN || !SPARC64)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This enables support for the Integraphics CyberPro 20x0 and 5000
-	  VGA chips used in the Rebel.com Netwinder and other machines.
-	  Say Y if you have a NetWinder or a graphics card containing this
-	  device, otherwise say N.
-
-config FB_CYBER2000_DDC
-	bool "DDC for CyberPro support"
-	depends on FB_CYBER2000
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC support for your CyberPro graphics
-	  card. This is only I2C bus support, driver does not use EDID.
-
-config FB_CYBER2000_I2C
-	bool "CyberPro 2000/2010/5000 I2C support"
-	depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
-	select I2C_ALGOBIT
-	help
-	  Enable support for the I2C video decoder interface on the
-	  Integraphics CyberPro 20x0 and 5000 VGA chips.  This is used
-	  on the Netwinder machines for the SAA7111 video capture.
-
-config FB_APOLLO
-	bool
-	depends on (FB = y) && APOLLO
-	default y
-	select FB_CFB_FILLRECT
-	select FB_CFB_IMAGEBLIT
-
-config FB_Q40
-	bool
-	depends on (FB = y) && Q40
-	default y
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-
-config FB_AMIGA
-	tristate "Amiga native chipset support"
-	depends on FB && AMIGA
-	help
-	  This is the frame buffer device driver for the builtin graphics
-	  chipset found in Amigas.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called amifb.
-
-config FB_AMIGA_OCS
-	bool "Amiga OCS chipset support"
-	depends on FB_AMIGA
-	help
-	  This enables support for the original Agnus and Denise video chips,
-	  found in the Amiga 1000 and most A500's and A2000's. If you intend
-	  to run Linux on any of these systems, say Y; otherwise say N.
-
-config FB_AMIGA_ECS
-	bool "Amiga ECS chipset support"
-	depends on FB_AMIGA
-	help
-	  This enables support for the Enhanced Chip Set, found in later
-	  A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
-	  you intend to run Linux on any of these systems, say Y; otherwise
-	  say N.
-
-config FB_AMIGA_AGA
-	bool "Amiga AGA chipset support"
-	depends on FB_AMIGA
-	help
-	  This enables support for the Advanced Graphics Architecture (also
-	  known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
-	  and CD32. If you intend to run Linux on any of these systems, say Y;
-	  otherwise say N.
-
-config FB_FM2
-	bool "Amiga FrameMaster II/Rainbow II support"
-	depends on (FB = y) && ZORRO
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Amiga FrameMaster
-	  card from BSC (exhibited 1992 but not shipped as a CBM product).
-
-config FB_ARC
-	tristate "Arc Monochrome LCD board support"
-	depends on FB && X86
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	help
-	  This enables support for the Arc Monochrome LCD board. The board
-	  is based on the KS-108 lcd controller and is typically a matrix
-	  of 2*n chips. This driver was tested with a 128x64 panel. This
-	  driver supports it for use with x86 SBCs through a 16 bit GPIO
-	  interface (8 bit data, 8 bit control). If you anticipate using
-	  this driver, say Y or M; otherwise say N. You must specify the
-	  GPIO IO address to be used for setting control and data.
-
-config FB_ATARI
-	bool "Atari native chipset support"
-	depends on (FB = y) && ATARI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the builtin graphics
-	  chipset found in Ataris.
-
-config FB_OF
-	bool "Open Firmware frame buffer device support"
-	depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-	help
-	  Say Y if you want support with Open Firmware for your graphics
-	  board.
-
-config FB_CONTROL
-	bool "Apple \"control\" display support"
-	depends on (FB = y) && PPC_PMAC && PPC32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-	help
-	  This driver supports a frame buffer for the graphics adapter in the
-	  Power Macintosh 7300 and others.
-
-config FB_PLATINUM
-	bool "Apple \"platinum\" display support"
-	depends on (FB = y) && PPC_PMAC && PPC32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-	help
-	  This driver supports a frame buffer for the "platinum" graphics
-	  adapter in some Power Macintoshes.
-
-config FB_VALKYRIE
-	bool "Apple \"valkyrie\" display support"
-	depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-	help
-	  This driver supports a frame buffer for the "valkyrie" graphics
-	  adapter in some Power Macintoshes.
-
-config FB_CT65550
-	bool "Chips 65550 display support"
-	depends on (FB = y) && PPC32 && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Chips & Technologies
-	  65550 graphics chip in PowerBooks.
-
-config FB_ASILIANT
-	bool "Asiliant (Chips) 69000 display support"
-	depends on (FB = y) && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Asiliant 69030 chipset
-
-config FB_IMSTT
-	bool "IMS Twin Turbo display support"
-	depends on (FB = y) && PCI
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES if PPC
-	help
-	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
-	  many Macintosh and compatible computers.
-
-config FB_VGA16
-	tristate "VGA 16-color graphics support"
-	depends on FB && (X86 || PPC)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	select FONT_8x16 if FRAMEBUFFER_CONSOLE
-	help
-	  This is the frame buffer device driver for VGA 16 color graphic
-	  cards. Say Y if you have such a card.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vga16fb.
-
-config FB_BF54X_LQ043
-	tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
-	depends on FB && (BF54x) && !BF542
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
-
-config FB_BFIN_T350MCQB
-	tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
-	depends on FB && BLACKFIN
-	select BFIN_GPTIMERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
-	 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
-	 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
-
-config FB_BFIN_LQ035Q1
-	tristate "SHARP LQ035Q1DH02 TFT LCD"
-	depends on FB && BLACKFIN && SPI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BFIN_GPTIMERS
-	help
-	  This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
-	  the Blackfin Landscape LCD EZ-Extender Card.
-	  This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
-	  It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin-lq035q1-fb.
-
-config FB_BF537_LQ035
-	tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
-	depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BFIN_GPTIMERS
-	help
-	  This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
-	  attached to a BF537.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bf537-lq035.
-
-config FB_BFIN_7393
-	tristate "Blackfin ADV7393 Video encoder"
-	depends on FB && BLACKFIN
-	select I2C
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for a ADV7393 video encoder
-	  attached to a Blackfin on the PPI port.
-	  If your Blackfin board has a ADV7393 select Y.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_adv7393fb.
-
-choice
-	prompt  "Video mode support"
-	depends on FB_BFIN_7393
-	default NTSC
-
-config NTSC
-	bool 'NTSC 720x480'
-
-config PAL
-	bool 'PAL 720x576'
-
-config NTSC_640x480
-	bool 'NTSC 640x480 (Experimental)'
-
-config PAL_640x480
-	bool 'PAL 640x480 (Experimental)'
-
-config NTSC_YCBCR
-	bool 'NTSC 720x480 YCbCR input'
-
-config PAL_YCBCR
-	bool 'PAL 720x576 YCbCR input'
-
-endchoice
-
-choice
-	prompt  "Size of ADV7393 frame buffer memory Single/Double Size"
-	depends on (FB_BFIN_7393)
-	default ADV7393_1XMEM
-
-config ADV7393_1XMEM
-	bool 'Single'
-
-config ADV7393_2XMEM
-	bool 'Double'
-endchoice
-
-config FB_STI
-	tristate "HP STI frame buffer device support"
-	depends on FB && PARISC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select STI_CONSOLE
-	select VT
-	default y
-	---help---
-	  STI refers to the HP "Standard Text Interface" which is a set of
-	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
-	  Enabling this option will implement the linux framebuffer device
-	  using calls to the STI BIOS routines for initialisation.
-	
-	  If you enable this option, you will get a planar framebuffer device
-	  /dev/fb which will work on the most common HP graphic cards of the
-	  NGLE family, including the artist chips (in the 7xx and Bxxx series),
-	  HCRX, HCRX24, CRX, CRX24 and VisEG series.
-
-	  It is safe to enable this option, so you should probably say "Y".
-
-config FB_MAC
-	bool "Generic Macintosh display support"
-	depends on (FB = y) && MAC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-
-config FB_HP300
-	bool
-	depends on (FB = y) && DIO
-	select FB_CFB_IMAGEBLIT
-	default y
-
-config FB_TGA
-	tristate "TGA/SFB+ framebuffer support"
-	depends on FB && (ALPHA || TC)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BITREVERSE
-	---help---
-	  This is the frame buffer device driver for generic TGA and SFB+
-	  graphic cards.  These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
-	  also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
-	  TURBOchannel cards, also known as PMAGD-A, -B and -C.
-
-	  Due to hardware limitations ZLX-E2 and E3 cards are not supported
-	  for DECstation 5000/200 systems.  Additionally due to firmware
-	  limitations these cards may cause troubles with booting DECstation
-	  5000/240 and /260 systems, but are fully supported under Linux if
-	  you manage to get it going. ;-)
-
-	  Say Y if you have one of those.
-
-config FB_UVESA
-	tristate "Userspace VESA VGA graphics support"
-	depends on FB && CONNECTOR
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	help
-	  This is the frame buffer driver for generic VBE 2.0 compliant
-	  graphic cards. It can also take advantage of VBE 3.0 features,
-	  such as refresh rate adjustment.
-
-	  This driver generally provides more features than vesafb but
-	  requires a userspace helper application called 'v86d'. See
-	  <file:Documentation/fb/uvesafb.txt> for more information.
-
-	  If unsure, say N.
-
-config FB_VESA
-	bool "VESA VGA graphics support"
-	depends on (FB = y) && X86
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BOOT_VESA_SUPPORT
-	help
-	  This is the frame buffer device driver for generic VESA 2.0
-	  compliant graphic cards. The older VESA 1.2 cards are not supported.
-	  You will get a boot time penguin logo at no additional cost. Please
-	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
-
-config FB_EFI
-	bool "EFI-based Framebuffer Support"
-	depends on (FB = y) && X86 && EFI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the EFI frame buffer device driver. If the firmware on
-	  your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
-	  using the EFI framebuffer as your console.
-
-config FB_N411
-       tristate "N411 Apollo/Hecuba devkit support"
-       depends on FB && X86 && MMU
-       select FB_SYS_FILLRECT
-       select FB_SYS_COPYAREA
-       select FB_SYS_IMAGEBLIT
-       select FB_SYS_FOPS
-       select FB_DEFERRED_IO
-       select FB_HECUBA
-       help
-         This enables support for the Apollo display controller in its
-         Hecuba form using the n411 devkit.
-
-config FB_HGA
-	tristate "Hercules mono graphics support"
-	depends on FB && X86
-	help
-	  Say Y here if you have a Hercules mono graphics card.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called hgafb.
-
-	  As this card technology is at least 25 years old,
-	  most people will answer N here.
-
-config FB_SGIVW
-	tristate "SGI Visual Workstation framebuffer support"
-	depends on FB && X86_VISWS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  SGI Visual Workstation support for framebuffer graphics.
-
-config FB_GBE
-	bool "SGI Graphics Backend frame buffer support"
-	depends on (FB = y) && (SGI_IP32 || X86_VISWS)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
- 	help
-	  This is the frame buffer device driver for SGI Graphics Backend.
-	  This chip is used in SGI O2 and Visual Workstation 320/540.
-
-config FB_GBE_MEM
-	int "Video memory size in MB"
-	depends on FB_GBE
-	default 4
-	help
-	  This is the amount of memory reserved for the framebuffer,
-	  which can be any value between 1MB and 8MB.
-
-config FB_SBUS
-	bool "SBUS and UPA framebuffers"
-	depends on (FB = y) && SPARC
-	help
-	  Say Y if you want support for SBUS or UPA based frame buffer device.
-
-config FB_BW2
-	bool "BWtwo support"
-	depends on (FB = y) && (SPARC && FB_SBUS)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the BWtwo frame buffer.
-
-config FB_CG3
-	bool "CGthree support"
-	depends on (FB = y) && (SPARC && FB_SBUS)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the CGthree frame buffer.
-
-config FB_CG6
-	bool "CGsix (GX,TurboGX) support"
-	depends on (FB = y) && (SPARC && FB_SBUS)
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the CGsix (GX, TurboGX)
-	  frame buffer.
-
-config FB_FFB
-	bool "Creator/Creator3D/Elite3D support"
-	depends on FB_SBUS && SPARC64
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Creator, Creator3D,
-	  and Elite3D graphics boards.
-
-config FB_TCX
-	bool "TCX (SS4/SS5 only) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the TCX 24/8bit frame
-	  buffer.
-
-config FB_CG14
-	bool "CGfourteen (SX) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the CGfourteen frame
-	  buffer on Desktop SPARCsystems with the SX graphics option.
-
-config FB_P9100
-	bool "P9100 (Sparcbook 3 only) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the P9100 card
-	  supported on Sparcbook 3 machines.
-
-config FB_LEO
-	bool "Leo (ZX) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the SBUS-based Sun ZX
-	  (leo) frame buffer cards.
-
-config FB_IGA
-	bool "IGA 168x display support"
-	depends on (FB = y) && SPARC32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the INTERGRAPHICS 1680 and
-	  successor frame buffer cards.
-
-config FB_XVR500
-	bool "Sun XVR-500 3DLABS Wildcat support"
-	depends on (FB = y) && PCI && SPARC64
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the Sun XVR-500 and similar
-	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
-	  only works on sparc64 systems where the system firmware has
-	  mostly initialized the card already.  It is treated as a
-	  completely dumb framebuffer device.
-
-config FB_XVR2500
-	bool "Sun XVR-2500 3DLABS Wildcat support"
-	depends on (FB = y) && PCI && SPARC64
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the Sun XVR-2500 and similar
-	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
-	  only works on sparc64 systems where the system firmware has
-	  mostly initialized the card already.  It is treated as a
-	  completely dumb framebuffer device.
-
-config FB_XVR1000
-	bool "Sun XVR-1000 support"
-	depends on (FB = y) && SPARC64
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the Sun XVR-1000 and similar
-	  graphics cards.  The driver only works on sparc64 systems where
-	  the system firmware has mostly initialized the card already.  It
-	  is treated as a completely dumb framebuffer device.
-
-config FB_PVR2
-	tristate "NEC PowerVR 2 display support"
-	depends on FB && SH_DREAMCAST
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Say Y here if you have a PowerVR 2 card in your box.  If you plan to
-	  run linux on your Dreamcast, you will have to say Y here.
-	  This driver may or may not work on other PowerVR 2 cards, but is
-	  totally untested.  Use at your own risk.  If unsure, say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called pvr2fb.
-
-	  You can pass several parameters to the driver at boot time or at
-	  module load time.  The parameters look like "video=pvr2:XXX", where
-	  the meaning of XXX can be found at the end of the main source file
-	  (<file:drivers/video/pvr2fb.c>). Please see the file
-	  <file:Documentation/fb/pvr2fb.txt>.
-
-config FB_OPENCORES
-	tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
-	depends on FB
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This enables support for the OpenCores VGA/LCD core.
-
-	  The OpenCores VGA/LCD core is typically used together with
-	  softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
-	  systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
-
-	  The source code and specification for the core is available at
-	  <http://opencores.org/project,vga_lcd>
-
-config FB_S1D13XXX
-	tristate "Epson S1D13XXX framebuffer support"
-	depends on FB
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Support for S1D13XXX framebuffer device family (currently only
-	  working with S1D13806). Product specs at
-	  <http://vdc.epson.com/>
-
-config FB_ATMEL
-	tristate "AT91/AT32 LCD Controller support"
-	depends on FB && HAVE_FB_ATMEL
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  This enables support for the AT91/AT32 LCD Controller.
-
-config FB_INTSRAM
-	bool "Frame Buffer in internal SRAM"
-	depends on FB_ATMEL && ARCH_AT91SAM9261
-	help
-	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
-	  to let frame buffer in external SDRAM.
-
-config FB_ATMEL_STN
-	bool "Use a STN display with AT91/AT32 LCD Controller"
-	depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
-	default n
-	help
-	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
-	  Controller. Say N if you want to connect a TFT.
-
-	  If unsure, say N.
-
-config FB_NVIDIA
-	tristate "nVidia Framebuffer Support"
-	depends on FB && PCI
-	select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BITREVERSE
-	select VGASTATE
-	help
-	  This driver supports graphics boards with the nVidia chips, TNT
-	  and newer. For very old chipsets, such as the RIVA128, then use
-	  the rivafb.
-	  Say Y if you have such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called nvidiafb.
-
-config FB_NVIDIA_I2C
-       bool "Enable DDC Support"
-       depends on FB_NVIDIA
-       select FB_DDC
-       help
-	  This enables I2C support for nVidia Chipsets.  This is used
-	  only for getting EDID information from the attached display
-	  allowing for robust video mode handling and switching.
-
-	  Because fbdev-2.6 requires that drivers must be able to
-	  independently validate video mode parameters, you should say Y
-	  here.
-
-config FB_NVIDIA_DEBUG
-	bool "Lots of debug output"
-	depends on FB_NVIDIA
-	default n
-	help
-	  Say Y here if you want the nVidia driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_NVIDIA_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_NVIDIA
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_RIVA
-	tristate "nVidia Riva support"
-	depends on FB && PCI
-	select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BITREVERSE
-	select VGASTATE
-	help
-	  This driver supports graphics boards with the nVidia Riva/Geforce
-	  chips.
-	  Say Y if you have such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rivafb.
-
-config FB_RIVA_I2C
-       bool "Enable DDC Support"
-       depends on FB_RIVA
-       select FB_DDC
-       help
-	  This enables I2C support for nVidia Chipsets.  This is used
-	  only for getting EDID information from the attached display
-	  allowing for robust video mode handling and switching.
-
-	  Because fbdev-2.6 requires that drivers must be able to
-	  independently validate video mode parameters, you should say Y
-	  here.
-
-config FB_RIVA_DEBUG
-	bool "Lots of debug output"
-	depends on FB_RIVA
-	default n
-	help
-	  Say Y here if you want the Riva driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_RIVA_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_RIVA
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_I740
-	tristate "Intel740 support"
-	depends on FB && PCI
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	select FB_DDC
-	help
-	  This driver supports graphics cards based on Intel740 chip.
-
-config FB_I810
-	tristate "Intel 810/815 support"
-	depends on FB && PCI && X86_32 && AGP_INTEL
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	help
-	  This driver supports the on-board graphics built in to the Intel 810 
-          and 815 chipsets.  Say Y if you have and plan to use such a board.
-
-          To compile this driver as a module, choose M here: the
-	  module will be called i810fb.
-
-          For more information, please read 
-	  <file:Documentation/fb/intel810.txt>
-
-config FB_I810_GTF
-	bool "use VESA Generalized Timing Formula"
-	depends on FB_I810
-	help
-	  If you say Y, then the VESA standard, Generalized Timing Formula 
-          or GTF, will be used to calculate the required video timing values
-	  per video mode.  Since the GTF allows nondiscrete timings 
-          (nondiscrete being a range of values as opposed to discrete being a
-          set of values), you'll be able to use any combination of horizontal 
-	  and vertical resolutions, and vertical refresh rates without having
-	  to specify your own timing parameters.  This is especially useful
-	  to maximize the performance of an aging display, or if you just 
-          have a display with nonstandard dimensions. A VESA compliant 
-	  monitor is recommended, but can still work with non-compliant ones.
-	  If you need or want this, then select this option. The timings may 
-	  not be compliant with Intel's recommended values. Use at your own 
-	  risk.
-
-          If you say N, the driver will revert to discrete video timings 
-	  using a set recommended by Intel in their documentation.
-  
-          If unsure, say N.
-
-config FB_I810_I2C
-	bool "Enable DDC Support"
-	depends on FB_I810 && FB_I810_GTF
-	select FB_DDC
-	help
-
-config FB_LE80578
-	tristate "Intel LE80578 (Vermilion) support"
-	depends on FB && PCI && X86
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This driver supports the LE80578 (Vermilion Range) chipset
-
-config FB_CARILLO_RANCH
-	tristate "Intel Carillo Ranch support"
-	depends on FB_LE80578 && FB && PCI && X86
-	help
-	  This driver supports the LE80578 (Carillo Ranch) board
-
-config FB_INTEL
-	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
-	depends on FB && PCI && X86 && AGP_INTEL && EXPERT
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
-	depends on !DRM_I915
-	help
-	  This driver supports the on-board graphics built in to the Intel
-          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
-          Say Y if you have and plan to use such a board.
-
-	  To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called intelfb.
-
-	  For more information, please read <file:Documentation/fb/intelfb.txt>
-
-config FB_INTEL_DEBUG
-	bool "Intel driver Debug Messages"
-	depends on FB_INTEL
-	---help---
-	  Say Y here if you want the Intel driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_INTEL_I2C
-	bool "DDC/I2C for Intel framebuffer support"
-	depends on FB_INTEL
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC/I2C support for your on-board Intel graphics.
-
-config FB_MATROX
-	tristate "Matrox acceleration"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_TILEBLITTING
-	select FB_MACMODES if PPC_PMAC
-	---help---
-	  Say Y here if you have a Matrox Millennium, Matrox Millennium II,
-	  Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
-	  Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
-	  Matrox G400, G450 or G550 card in your box.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called matroxfb.
-
-	  You can pass several parameters to the driver at boot time or at
-	  module load time. The parameters look like "video=matroxfb:XXX", and
-	  are described in <file:Documentation/fb/matroxfb.txt>.
-
-config FB_MATROX_MILLENIUM
-	bool "Millennium I/II support"
-	depends on FB_MATROX
-	help
-	  Say Y here if you have a Matrox Millennium or Matrox Millennium II
-	  video card. If you select "Advanced lowlevel driver options" below,
-	  you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
-	  packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
-	  also use font widths different from 8.
-
-config FB_MATROX_MYSTIQUE
-	bool "Mystique support"
-	depends on FB_MATROX
-	help
-	  Say Y here if you have a Matrox Mystique or Matrox Mystique 220
-	  video card. If you select "Advanced lowlevel driver options" below,
-	  you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
-	  packed pixel and 32 bpp packed pixel. You can also use font widths
-	  different from 8.
-
-config FB_MATROX_G
-	bool "G100/G200/G400/G450/G550 support"
-	depends on FB_MATROX
-	---help---
-	  Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
-	  video card. If you select "Advanced lowlevel driver options", you
-	  should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
-	  pixel and 32 bpp packed pixel. You can also use font widths
-	  different from 8.
-
-	  If you need support for G400 secondary head, you must say Y to
-	  "Matrox I2C support" and "G400 second head support" right below.
-	  G450/G550 secondary head and digital output are supported without
-	  additional modules.
-
-	  The driver starts in monitor mode. You must use the matroxset tool 
-	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to 
-	  swap primary and secondary head outputs, or to change output mode.  
-	  Secondary head driver always start in 640x480 resolution and you 
-	  must use fbset to change it.
-
-	  Do not forget that second head supports only 16 and 32 bpp
-	  packed pixels, so it is a good idea to compile them into the kernel
-	  too. You can use only some font widths, as the driver uses generic
-	  painting procedures (the secondary head does not use acceleration
-	  engine).
-
-	  G450/G550 hardware can display TV picture only from secondary CRTC,
-	  and it performs no scaling, so picture must have 525 or 625 lines.
-
-config FB_MATROX_I2C
-	tristate "Matrox I2C support"
-	depends on FB_MATROX
-	select FB_DDC
-	---help---
-	  This drivers creates I2C buses which are needed for accessing the
-	  DDC (I2C) bus present on all Matroxes, an I2C bus which
-	  interconnects Matrox optional devices, like MGA-TVO on G200 and
-	  G400, and the secondary head DDC bus, present on G400 only.
-
-	  You can say Y or M here if you want to experiment with monitor
-	  detection code. You must say Y or M here if you want to use either
-	  second head of G400 or MGA-TVO on G200 or G400.
-
-	  If you compile it as module, it will create a module named
-	  i2c-matroxfb.
-
-config FB_MATROX_MAVEN
-	tristate "G400 second head support"
-	depends on FB_MATROX_G && FB_MATROX_I2C
-	---help---
-	  WARNING !!! This support does not work with G450 !!!
-
-	  Say Y or M here if you want to use a secondary head (meaning two
-	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
-	  head is not compatible with accelerated XFree 3.3.x SVGA servers -
-	  secondary head output is blanked while you are in X. With XFree
-	  3.9.17 preview you can use both heads if you use SVGA over fbdev or
-	  the fbdev driver on first head and the fbdev driver on second head.
-
-	  If you compile it as module, two modules are created,
-	  matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
-	  both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
-	  also load i2c-matroxfb to get it to run.
-
-	  The driver starts in monitor mode and you must use the matroxset
-	  tool (available at
-	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
-	  PAL or NTSC or to swap primary and secondary head outputs.
-	  Secondary head driver also always start in 640x480 resolution, you
-	  must use fbset to change it.
-
-	  Also do not forget that second head supports only 16 and 32 bpp
-	  packed pixels, so it is a good idea to compile them into the kernel
-	  too.  You can use only some font widths, as the driver uses generic
-	  painting procedures (the secondary head does not use acceleration
-	  engine).
-
-config FB_RADEON
-	tristate "ATI Radeon display support"
-	depends on FB && PCI
-	select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES if PPC_OF
-	help
-	  Choose this option if you want to use an ATI Radeon graphics card as
-	  a framebuffer device.  There are both PCI and AGP versions.  You
-	  don't need to choose this to run the Radeon in plain VGA mode.
-
-	  There is a product page at
-	  http://products.amd.com/en-us/GraphicCardResult.aspx
-
-config FB_RADEON_I2C
-	bool "DDC/I2C for ATI Radeon support"
-	depends on FB_RADEON
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC/I2C support for your Radeon board. 
-
-config FB_RADEON_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_RADEON
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_RADEON_DEBUG
-	bool "Lots of debug output from Radeon driver"
-	depends on FB_RADEON
-	default n
-	help
-	  Say Y here if you want the Radeon driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_ATY128
-	tristate "ATI Rage128 display support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
-	select FB_MACMODES if PPC_PMAC
-	help
-	  This driver supports graphics boards with the ATI Rage128 chips.
-	  Say Y if you have such a graphics board and read
-	  <file:Documentation/fb/aty128fb.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called aty128fb.
-
-config FB_ATY128_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_ATY128
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_ATY
-	tristate "ATI Mach64 display support" if PCI || ATARI
-	depends on FB && !SPARC32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BACKLIGHT if FB_ATY_BACKLIGHT
-	select FB_MACMODES if PPC
-	help
-	  This driver supports graphics boards with the ATI Mach64 chips.
-	  Say Y if you have such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called atyfb.
-
-config FB_ATY_CT
-	bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
-	depends on PCI && FB_ATY
-	default y if SPARC64 && PCI
-	help
-	  Say Y here to support use of ATI's 64-bit Rage boards (or other
-	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
-	  framebuffer device.  The ATI product support page for these boards
-	  is at <http://support.ati.com/products/pc/mach64/mach64.html>.
-
-config FB_ATY_GENERIC_LCD
-	bool "Mach64 generic LCD support"
-	depends on FB_ATY_CT
-	help
-	  Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
-	  Rage XC, or Rage XL chipset.
-
-config FB_ATY_GX
-	bool "Mach64 GX support" if PCI
-	depends on FB_ATY
-	default y if ATARI
-	help
-	  Say Y here to support use of the ATI Mach64 Graphics Expression
-	  board (or other boards based on the Mach64 GX chipset) as a
-	  framebuffer device.  The ATI product support page for these boards
-	  is at
-	  <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
-
-config FB_ATY_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_ATY
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_S3
-	tristate "S3 Trio/Virge support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_TILEBLITTING
-	select FB_SVGALIB
-	select VGASTATE
-	select FONT_8x16 if FRAMEBUFFER_CONSOLE
-	---help---
-	  Driver for graphics boards with S3 Trio / S3 Virge chip.
-
-config FB_S3_DDC
-	bool "DDC for S3 support"
-	depends on FB_S3
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC support for your S3 graphics card.
-
-config FB_SAVAGE
-	tristate "S3 Savage support"
-	depends on FB && PCI
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	help
-	  This driver supports notebooks and computers with S3 Savage PCI/AGP
-	  chips.
-
-	  Say Y if you have such a graphics card.
-
-	  To compile this driver as a module, choose M here; the module
-	  will be called savagefb.
-
-config FB_SAVAGE_I2C
-       bool "Enable DDC2 Support"
-       depends on FB_SAVAGE
-       select FB_DDC
-       help
-	  This enables I2C support for S3 Savage Chipsets.  This is used
-	  only for getting EDID information from the attached display
-	  allowing for robust video mode handling and switching.
-
-	  Because fbdev-2.6 requires that drivers must be able to
-	  independently validate video mode parameters, you should say Y
-	  here.
-
-config FB_SAVAGE_ACCEL
-       bool "Enable Console Acceleration"
-       depends on FB_SAVAGE
-       default n
-       help
-          This option will compile in console acceleration support. If
-          the resulting framebuffer console has bothersome glitches, then
-          choose N here.
-
-config FB_SIS
-	tristate "SiS/XGI display support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BOOT_VESA_SUPPORT if FB_SIS = y
-	help
-	  This is the frame buffer device driver for the SiS 300, 315, 330
-	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
-	  Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
-
-	  To compile this driver as a module, choose M here; the module
-	  will be called sisfb.
-
-config FB_SIS_300
-	bool "SiS 300 series support"
-	depends on FB_SIS
-	help
-	  Say Y here to support use of the SiS 300/305, 540, 630 and 730.
-
-config FB_SIS_315
-	bool "SiS 315/330/340 series and XGI support"
-	depends on FB_SIS
-	help
-	  Say Y here to support use of the SiS 315, 330 and 340 series
-	  (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
-	  as XGI V3XT, V5, V8 and Z7.
-
-config FB_VIA
-       tristate "VIA UniChrome (Pro) and Chrome9 display support"
-       depends on FB && PCI && X86
-       select FB_CFB_FILLRECT
-       select FB_CFB_COPYAREA
-       select FB_CFB_IMAGEBLIT
-       select I2C_ALGOBIT
-       select I2C
-       select GPIOLIB
-       help
-	  This is the frame buffer device driver for Graphics chips of VIA
-	  UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
-	  CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
- 	  /P4M900,VX800)
-	  Say Y if you have a VIA UniChrome graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called viafb.
-
-if FB_VIA
-
-config FB_VIA_DIRECT_PROCFS
-	bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
-	depends on FB_VIA
-	default n
-	help
-	  Allow direct hardware access to some output registers via procfs.
-	  This is dangerous but may provide the only chance to get the
-	  correct output device configuration.
-	  Its use is strongly discouraged.
-
-config FB_VIA_X_COMPATIBILITY
-	bool "X server compatibility"
-	depends on FB_VIA
-	default n
-	help
-	  This option reduces the functionality (power saving, ...) of the
-	  framebuffer to avoid negative impact on the OpenChrome X server.
-	  If you use any X server other than fbdev you should enable this
-	  otherwise it should be safe to disable it and allow using all
-	  features.
-
-endif
-
-config FB_NEOMAGIC
-	tristate "NeoMagic display support"
-	depends on FB && PCI
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	help
-	  This driver supports notebooks with NeoMagic PCI chips.
-	  Say Y if you have such a graphics card. 
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called neofb.
-
-config FB_KYRO
-	tristate "IMG Kyro support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
-	  graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called kyrofb.
-
-config FB_3DFX
-	tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
-	depends on FB && PCI
-	select FB_CFB_IMAGEBLIT
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_MODE_HELPERS
-	help
-	  This driver supports graphics boards with the 3Dfx Banshee,
-	  Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
-	  such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tdfxfb.
-
-config FB_3DFX_ACCEL
-	bool "3Dfx Acceleration functions"
-	depends on FB_3DFX
-	---help---
-	This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
-	device driver with acceleration functions.
-
-config FB_3DFX_I2C
-	bool "Enable DDC/I2C support"
-	depends on FB_3DFX
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
-
-config FB_VOODOO1
-	tristate "3Dfx Voodoo Graphics (sst1) support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or 
-	  Voodoo2 (cvg) based graphics card.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sstfb.
-
-	  WARNING: Do not use any application that uses the 3D engine
-	  (namely glide) while using this driver.
-	  Please read the <file:Documentation/fb/sstfb.txt> for supported
-	  options and other important info  support.
-
-config FB_VT8623
-	tristate "VIA VT8623 support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_TILEBLITTING
-	select FB_SVGALIB
-	select VGASTATE
-	select FONT_8x16 if FRAMEBUFFER_CONSOLE
-	---help---
-	  Driver for CastleRock integrated graphics core in the
-	  VIA VT8623 [Apollo CLE266] chipset.
-
-config FB_TRIDENT
-	tristate "Trident/CyberXXX/CyberBlade support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  This is the frame buffer device driver for Trident PCI/AGP chipsets.
-	  Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
-	  and Blade XP.
-	  There are also integrated versions of these chips called CyberXXXX,
-	  CyberImage or CyberBlade. These chips are mostly found in laptops
-	  but also on some motherboards including early VIA EPIA motherboards.
-	  For more information, read <file:Documentation/fb/tridentfb.txt>
-
-	  Say Y if you have such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tridentfb.
-
-config FB_ARK
-	tristate "ARK 2000PV support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_TILEBLITTING
-	select FB_SVGALIB
-	select VGASTATE
-	select FONT_8x16 if FRAMEBUFFER_CONSOLE
-	---help---
-	  Driver for PCI graphics boards with ARK 2000PV chip
-	  and ICS 5342 RAMDAC.
-
-config FB_PM3
-	tristate "Permedia3 support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the 3DLabs Permedia3
-	  chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
-	  similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
-	  and maybe other boards.
-
-config FB_CARMINE
-	tristate "Fujitsu carmine frame buffer support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Fujitsu Carmine chip.
-	  The driver provides two independent frame buffer devices.
-
-choice
-	depends on FB_CARMINE
-	prompt "DRAM timing"
-	default FB_CARMINE_DRAM_EVAL
-
-config FB_CARMINE_DRAM_EVAL
-	bool "Eval board timings"
-	help
-	  Use timings which work on the eval card.
-
-config CARMINE_DRAM_CUSTOM
-	bool "Custom board timings"
-	help
-	  Use custom board timings.
-endchoice
-
-config FB_AU1100
-	bool "Au1100 LCD Driver"
-	depends on (FB = y) && MIPS_ALCHEMY
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer driver for the AMD Au1100 SOC.  It can drive
-	  various panels and CRTs by passing in kernel cmd line option
-	  au1100fb:panel=<name>.
-
-config FB_AU1200
-	bool "Au1200/Au1300 LCD Driver"
-	depends on (FB = y) && MIPS_ALCHEMY
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	help
-	  This is the framebuffer driver for the Au1200/Au1300 SOCs.
-	  It can drive various panels and CRTs by passing in kernel cmd line
-	  option au1200fb:panel=<name>.
-
-config FB_VT8500
-	bool "VIA VT8500 framebuffer support"
-	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
-	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
-	select FB_SYS_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  This is the framebuffer driver for VIA VT8500 integrated LCD
-	  controller.
-
-config FB_WM8505
-	bool "Wondermedia WM8xxx-series frame buffer support"
-	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
-	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
-	select FB_SYS_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  This is the framebuffer driver for WonderMedia WM8xxx-series
-	  integrated LCD controller. This driver covers the WM8505, WM8650
-	  and WM8850 SoCs.
-
-config FB_WMT_GE_ROPS
-	bool "VT8500/WM8xxx accelerated raster ops support"
-	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
-	default n
-	help
-	  This adds support for accelerated raster operations on the
-	  VIA VT8500 and Wondermedia 85xx series SoCs.
-
-source "drivers/video/geode/Kconfig"
-
-config FB_HIT
-	tristate "HD64461 Frame Buffer support"
-	depends on FB && HD64461
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Hitachi HD64461 LCD
-	  frame buffer card.
-
-config FB_PMAG_AA
-	bool "PMAG-AA TURBOchannel framebuffer support"
-	depends on (FB = y) && TC
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
-	  used mainly in the MIPS-based DECstation series.
-
-config FB_PMAG_BA
-	tristate "PMAG-BA TURBOchannel framebuffer support"
-	depends on FB && TC
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
-	  used mainly in the MIPS-based DECstation series.
-
-config FB_PMAGB_B
-	tristate "PMAGB-B TURBOchannel framebuffer support"
-	depends on FB && TC
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
-	  in the MIPS-based DECstation series. The card is currently only
-	  supported in 1280x1024x8 mode.
-
-config FB_MAXINE
-	bool "Maxine (Personal DECstation) onboard framebuffer support"
-	depends on (FB = y) && MACH_DECSTATION
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Support for the onboard framebuffer (1024x768x8) in the Personal
-	  DECstation series (Personal DECstation 5000/20, /25, /33, /50,
-	  Codename "Maxine").
-
-config FB_G364
-	bool "G364 frame buffer support"
-	depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  The G364 driver is the framebuffer used in MIPS Magnum 4000 and
-	  Olivetti M700-10 systems.
-
-config FB_68328
-	bool "Motorola 68328 native frame buffer support"
-	depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Say Y here if you want to support the built-in frame buffer of
-	  the Motorola 68328 CPU family.
-
-config FB_PXA168
-	tristate "PXA168/910 LCD framebuffer support"
-	depends on FB && (CPU_PXA168 || CPU_PXA910)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the built-in LCD controller in the Marvell
-	  MMP processor.
-
-config FB_PXA
-	tristate "PXA LCD framebuffer support"
-	depends on FB && ARCH_PXA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the built-in LCD controller in the Intel
-	  PXA2x0 processor.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called pxafb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-
-config FB_PXA_OVERLAY
-	bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
-	default n
-	depends on FB_PXA && (PXA27x || PXA3xx)
-
-config FB_PXA_SMARTPANEL
-	bool "PXA Smartpanel LCD support"
-	default n
-	depends on FB_PXA
-
-config FB_PXA_PARAMETERS
-	bool "PXA LCD command line parameters"
-	default n
-	depends on FB_PXA
-	---help---
-	  Enable the use of kernel command line or module parameters
-	  to configure the physical properties of the LCD panel when
-	  using the PXA LCD driver.
-
-	  This option allows you to override the panel parameters
-	  supplied by the platform in order to support multiple
-	  different models of flatpanel. If you will only be using a
-	  single model of flatpanel then you can safely leave this
-	  option disabled.
-
-	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
-
-config PXA3XX_GCU
-	tristate "PXA3xx 2D graphics accelerator driver"
-	depends on FB_PXA
-	help
-	  Kernelspace driver for the 2D graphics controller unit (GCU)
-	  found on PXA3xx processors. There is a counterpart driver in the
-	  DirectFB suite, see http://www.directfb.org/
-
-	  If you compile this as a module, it will be called pxa3xx_gcu.
-
-config FB_MBX
-	tristate "2700G LCD framebuffer support"
-	depends on FB && ARCH_PXA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Framebuffer driver for the Intel 2700G (Marathon) Graphics
-	  Accelerator
-
-config FB_MBX_DEBUG
-       bool "Enable debugging info via debugfs"
-       depends on FB_MBX && DEBUG_FS
-       default n
-       ---help---
-         Enable this if you want debugging information using the debug
-         filesystem (debugfs)
-
-         If unsure, say N.
-
-config FB_FSL_DIU
-	tristate "Freescale DIU framebuffer support"
-	depends on FB && FSL_SOC
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select PPC_LIB_RHEAP
-	---help---
-	  Framebuffer driver for the Freescale SoC DIU
-
-config FB_W100
-	tristate "W100 frame buffer support"
-	depends on FB && ARCH_PXA
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
-	  It can also drive the w3220 chip found on iPAQ hx4700.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called w100fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-
-config FB_SH_MOBILE_LCDC
-	tristate "SuperH Mobile LCDC framebuffer support"
-	depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	select FB_BACKLIGHT
-	select SH_MIPI_DSI if SH_LCD_MIPI_DSI
-	---help---
-	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
-
-config FB_SH_MOBILE_HDMI
-	tristate "SuperH Mobile HDMI controller support"
-	depends on FB_SH_MOBILE_LCDC
-	select FB_MODE_HELPERS
-	select SOUND
-	select SND
-	select SND_SOC
-	---help---
-	  Driver for the on-chip SH-Mobile HDMI controller.
-
-config FB_TMIO
-	tristate "Toshiba Mobile IO FrameBuffer support"
-	depends on FB && MFD_CORE
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the Toshiba Mobile IO integrated as found
-	  on the Sharp SL-6000 series
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called tmiofb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-
-config FB_TMIO_ACCELL
-	bool "tmiofb acceleration"
-	depends on FB_TMIO
-	default y
-
-config FB_S3C
-	tristate "Samsung S3C framebuffer support"
-	depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \
-		ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the built-in FB controller in the Samsung
-	  SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
-	  and the S3C64XX series such as the S3C6400 and S3C6410.
-
-	  These chips all have the same basic framebuffer design with the
-	  actual capabilities depending on the chip. For instance the S3C6400
-	  and S3C6410 support 4 hardware windows whereas the S3C24XX series
-	  currently only have two.
-
-	  Currently the support is only for the S3C6400 and S3C6410 SoCs.
-
-config FB_S3C_DEBUG_REGWRITE
-       bool "Debug register writes"
-       depends on FB_S3C
-       ---help---
-         Show all register writes via pr_debug()
-
-config FB_S3C2410
-	tristate "S3C2410 LCD framebuffer support"
-	depends on FB && ARCH_S3C24XX
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the built-in LCD controller in the Samsung
-	  S3C2410 processor.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called s3c2410fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-config FB_S3C2410_DEBUG
-	bool "S3C2410 lcd debug messages"
-	depends on FB_S3C2410
-	help
-	  Turn on debugging messages. Note that you can set/unset at run time
-	  through sysfs
-
-config FB_NUC900
-        bool "NUC900 LCD framebuffer support"
-        depends on FB && ARCH_W90X900
-        select FB_CFB_FILLRECT
-        select FB_CFB_COPYAREA
-        select FB_CFB_IMAGEBLIT
-        ---help---
-          Frame buffer driver for the built-in LCD controller in the Nuvoton
-          NUC900 processor
-
-config GPM1040A0_320X240
-        bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
-        depends on FB_NUC900
-
-config FB_SM501
-	tristate "Silicon Motion SM501 framebuffer support"
-	depends on FB && MFD_SM501
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the CRT and LCD controllers in the Silicon
-	  Motion SM501.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called sm501fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-
-config FB_SMSCUFX
-	tristate "SMSC UFX6000/7000 USB Framebuffer support"
-	depends on FB && USB
-	select FB_MODE_HELPERS
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	---help---
-	  This is a kernel framebuffer driver for SMSC UFX USB devices.
-	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
-	  mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
-	  (USB 3.0) devices.
-	  To compile as a module, choose M here: the module name is smscufx.
-
-config FB_UDL
-	tristate "Displaylink USB Framebuffer support"
-	depends on FB && USB
-	select FB_MODE_HELPERS
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	---help---
-	  This is a kernel framebuffer driver for DisplayLink USB devices.
-	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
-	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
-	  To compile as a module, choose M here: the module name is udlfb.
-
-config FB_IBM_GXT4500
-	tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
-	depends on FB && PPC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Say Y here to enable support for the IBM GXT4000P/6000P and
-	  GXT4500P/6500P display adaptor based on Raster Engine RC1000,
-	  found on some IBM System P (pSeries) machines. This driver
-	  doesn't use Geometry Engine GT1000.
-
-config FB_PS3
-	tristate "PS3 GPU framebuffer driver"
-	depends on FB && PS3_PS3AV
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
-	---help---
-	  Include support for the virtual frame buffer in the PS3 platform.
-
-config FB_PS3_DEFAULT_SIZE_M
-	int "PS3 default frame buffer size (in MiB)"
-	depends on FB_PS3
-	default 9
-	---help---
-	  This is the default size (in MiB) of the virtual frame buffer in
-	  the PS3.
-	  The default value can be overridden on the kernel command line
-	  using the "ps3fb" option (e.g. "ps3fb=9M");
-
-config FB_XILINX
-	tristate "Xilinx frame buffer support"
-	depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Include support for the Xilinx ML300/ML403 reference design
-	  framebuffer. ML300 carries a 640*480 LCD display on the board,
-	  ML403 uses a standard DB15 VGA connector.
-
-config FB_GOLDFISH
-	tristate "Goldfish Framebuffer"
-	depends on FB && HAS_DMA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Framebuffer driver for Goldfish Virtual Platform
-
-config FB_COBALT
-	tristate "Cobalt server LCD frame buffer support"
-	depends on FB && (MIPS_COBALT || MIPS_SEAD3)
-
-config FB_SH7760
-	bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
-	depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
-		|| CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Support for the SH7760/SH7763/SH7720/SH7721 integrated
-	  (D)STN/TFT LCD Controller.
-	  Supports display resolutions up to 1024x1024 pixel, grayscale and
-	  color operation, with depths ranging from 1 bpp to 8 bpp monochrome
-	  and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
-	  panels <= 320 pixel horizontal resolution.
-
-config FB_DA8XX
-	tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
-	depends on FB && (ARCH_DAVINCI_DA8XX || SOC_AM33XX)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_CFB_REV_PIXELS_IN_BYTE
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	---help---
-	  This is the frame buffer device driver for the TI LCD controller
-	  found on DA8xx/OMAP-L1xx/AM335x SoCs.
-	  If unsure, say N.
-
-config FB_VIRTUAL
-	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
-	depends on FB
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	---help---
-	  This is a `virtual' frame buffer device. It operates on a chunk of
-	  unswappable kernel memory instead of on the memory of a graphics
-	  board. This means you cannot see any output sent to this frame
-	  buffer device, while it does consume precious memory. The main use
-	  of this frame buffer device is testing and debugging the frame
-	  buffer subsystem. Do NOT enable it for normal systems! To protect
-	  the innocent, it has to be enabled explicitly at boot time using the
-	  kernel option `video=vfb:'.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vfb. In order to load it, you must use
-	  the vfb_enable=1 option.
-
-	  If unsure, say N.
-
-config XEN_FBDEV_FRONTEND
-	tristate "Xen virtual frame buffer support"
-	depends on FB && XEN
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	select INPUT_XEN_KBDDEV_FRONTEND if INPUT_MISC
-	select XEN_XENBUS_FRONTEND
-	default y
-	help
-	  This driver implements the front-end of the Xen virtual
-	  frame buffer driver.  It communicates with a back-end
-	  in another domain.
-
-config FB_METRONOME
-	tristate "E-Ink Metronome/8track controller support"
-	depends on FB
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	help
-	  This driver implements support for the E-Ink Metronome
-	  controller. The pre-release name for this device was 8track
-	  and could also have been called by some vendors as PVI-nnnn.
-
-config FB_MB862XX
-	tristate "Fujitsu MB862xx GDC support"
-	depends on FB
-	depends on PCI || (OF && PPC)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
-
-choice
-	prompt "GDC variant"
-	depends on FB_MB862XX
-
-config FB_MB862XX_PCI_GDC
-	bool "Carmine/Coral-P(A) GDC"
-	depends on PCI
-	---help---
-	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
-	  PCI graphics controller devices.
-
-config FB_MB862XX_LIME
-	bool "Lime GDC"
-	depends on OF && PPC
-	select FB_FOREIGN_ENDIAN
-	select FB_LITTLE_ENDIAN
-	---help---
-	  Framebuffer support for Fujitsu Lime GDC on host CPU bus.
-
-endchoice
-
-config FB_MB862XX_I2C
-	bool "Support I2C bus on MB862XX GDC"
-	depends on FB_MB862XX && I2C
-	default y
-	help
-	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
-	  driver to support accessing I2C devices on controller's I2C bus.
-	  These are usually some video decoder chips.
-
-config FB_EP93XX
-	tristate "EP93XX frame buffer support"
-	depends on FB && ARCH_EP93XX
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Framebuffer driver for the Cirrus Logic EP93XX series of processors.
-	  This driver is also available as a module. The module will be called
-	  ep93xx-fb.
-
-config FB_PRE_INIT_FB
-	bool "Don't reinitialize, use bootloader's GDC/Display configuration"
-	depends on FB && FB_MB862XX_LIME
-	---help---
-	  Select this option if display contents should be inherited as set by
-	  the bootloader.
-
-config FB_MSM
-	tristate "MSM Framebuffer support"
-	depends on FB && ARCH_MSM
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-
-config FB_MX3
-	tristate "MX3 Framebuffer support"
-	depends on FB && MX3_IPU
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	default y
-	help
-	  This is a framebuffer device for the i.MX31 LCD Controller. So
-	  far only synchronous displays are supported. If you plan to use
-	  an LCD display with your i.MX31 system, say Y here.
-
-config FB_BROADSHEET
-	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
-	depends on FB
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	help
-	  This driver implements support for the E-Ink Broadsheet
-	  controller. The release name for this device was Epson S1D13521
-	  and could also have been called by other names when coupled with
-	  a bridge adapter.
-
-config FB_AUO_K190X
-	tristate "AUO-K190X EPD controller support"
-	depends on FB
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	help
-	  Provides support for epaper controllers from the K190X series
-	  of AUO. These controllers can be used to drive epaper displays
-	  from Sipix.
-
-	  This option enables the common support, shared by the individual
-	  controller drivers. You will also have to enable the driver
-	  for the controller type used in your device.
-
-config FB_AUO_K1900
-	tristate "AUO-K1900 EPD controller support"
-	depends on FB && FB_AUO_K190X
-	help
-	  This driver implements support for the AUO K1900 epd-controller.
-	  This controller can drive Sipix epaper displays but can only do
-	  serial updates, reducing the number of possible frames per second.
-
-config FB_AUO_K1901
-	tristate "AUO-K1901 EPD controller support"
-	depends on FB && FB_AUO_K190X
-	help
-	  This driver implements support for the AUO K1901 epd-controller.
-	  This controller can drive Sipix epaper displays and supports
-	  concurrent updates, making higher frames per second possible.
-
-config FB_JZ4740
-	tristate "JZ4740 LCD framebuffer support"
-	depends on FB && MACH_JZ4740
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	help
-	  Framebuffer support for the JZ4740 SoC.
-
-config FB_MXS
-	tristate "MXS LCD framebuffer support"
-	depends on FB && ARCH_MXS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  Framebuffer support for the MXS SoC.
-
-config FB_PUV3_UNIGFX
-	tristate "PKUnity v3 Unigfx framebuffer support"
-	depends on FB && UNICORE32 && ARCH_PUV3
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	help
-	  Choose this option if you want to use the Unigfx device as a
-	  framebuffer device. Without the support of PCI & AGP.
-
-config FB_HYPERV
-	tristate "Microsoft Hyper-V Synthetic Video support"
-	depends on FB && HYPERV
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
-
-config FB_SIMPLE
-	bool "Simple framebuffer support"
-	depends on (FB = y)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Say Y if you want support for a simple frame-buffer.
-
-	  This driver assumes that the display hardware has been initialized
-	  before the kernel boots, and the kernel will simply render to the
-	  pre-allocated frame buffer surface.
-
-	  Configuration re: surface address, size, and format must be provided
-	  through device tree, or plain old platform data.
-
-source "drivers/video/omap/Kconfig"
-source "drivers/video/omap2/Kconfig"
-source "drivers/video/exynos/Kconfig"
-source "drivers/video/mmp/Kconfig"
-source "drivers/video/backlight/Kconfig"
-
 if VT
 	source "drivers/video/console/Kconfig"
 endif
 
 if FB || SGI_NEWPORT_CONSOLE
 	source "drivers/video/logo/Kconfig"
-endif
 
-config FB_SH_MOBILE_MERAM
-	tristate "SuperH Mobile MERAM read ahead support"
-	depends on (SUPERH || ARCH_SHMOBILE)
-	select GENERIC_ALLOCATOR
-	---help---
-	  Enable MERAM support for the SuperH controller.
-
-	  This will allow for caching of the framebuffer to provide more
-	  reliable access under heavy main memory bus traffic situations.
-	  Up to 4 memory channels can be configured, allowing 4 RGB or
-	  2 YCbCr framebuffers to be configured.
+endif
 
-config FB_SSD1307
-	tristate "Solomon SSD1307 framebuffer support"
-	depends on FB && I2C
-	depends on OF
-	depends on GPIOLIB
-	select FB_SYS_FOPS
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_DEFERRED_IO
-	select PWM
-	help
-	  This driver implements support for the Solomon SSD1307
-	  OLED controller over I2C.
 
 endmenu
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index ae17ddf49a00..9ad3c17d6456 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -1,179 +1,12 @@
-# Makefile for the Linux video drivers.
-# 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
-# Rewritten to use lists instead of if-statements.
-
-# Each configuration option enables a list of files.
-
 obj-$(CONFIG_VGASTATE)            += vgastate.o
 obj-$(CONFIG_HDMI)                += hdmi.o
-obj-y                             += fb_notify.o
-obj-$(CONFIG_FB)                  += fb.o
-fb-y                              := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
-                                     modedb.o fbcvt.o
-fb-objs                           := $(fb-y)
 
 obj-$(CONFIG_VT)		  += console/
 obj-$(CONFIG_LOGO)		  += logo/
 obj-y				  += backlight/
 
-obj-$(CONFIG_EXYNOS_VIDEO)     += exynos/
-
-obj-$(CONFIG_FB_CFB_FILLRECT)  += cfbfillrect.o
-obj-$(CONFIG_FB_CFB_COPYAREA)  += cfbcopyarea.o
-obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
-obj-$(CONFIG_FB_SYS_FILLRECT)  += sysfillrect.o
-obj-$(CONFIG_FB_SYS_COPYAREA)  += syscopyarea.o
-obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o
-obj-$(CONFIG_FB_SYS_FOPS)      += fb_sys_fops.o
-obj-$(CONFIG_FB_SVGALIB)       += svgalib.o
-obj-$(CONFIG_FB_MACMODES)      += macmodes.o
-obj-$(CONFIG_FB_DDC)           += fb_ddc.o
-obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
-obj-$(CONFIG_FB_WMT_GE_ROPS)   += wmt_ge_rops.o
-
-# Hardware specific drivers go first
-obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p_planar.o
-obj-$(CONFIG_FB_ARC)              += arcfb.o
-obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
-obj-$(CONFIG_FB_CYBER2000)        += cyber2000fb.o
-obj-$(CONFIG_FB_GRVGA)            += grvga.o
-obj-$(CONFIG_FB_PM2)              += pm2fb.o
-obj-$(CONFIG_FB_PM3)		  += pm3fb.o
-
-obj-$(CONFIG_FB_I740)		  += i740fb.o
-obj-$(CONFIG_FB_MATROX)		  += matrox/
-obj-$(CONFIG_FB_RIVA)		  += riva/
-obj-$(CONFIG_FB_NVIDIA)		  += nvidia/
-obj-$(CONFIG_FB_ATY)		  += aty/ macmodes.o
-obj-$(CONFIG_FB_ATY128)		  += aty/ macmodes.o
-obj-$(CONFIG_FB_RADEON)		  += aty/
-obj-$(CONFIG_FB_SIS)		  += sis/
-obj-$(CONFIG_FB_VIA)		  += via/
-obj-$(CONFIG_FB_KYRO)             += kyro/
-obj-$(CONFIG_FB_SAVAGE)		  += savage/
-obj-$(CONFIG_FB_GEODE)		  += geode/
-obj-$(CONFIG_FB_MBX)		  += mbx/
-obj-$(CONFIG_FB_NEOMAGIC)         += neofb.o
-obj-$(CONFIG_FB_3DFX)             += tdfxfb.o
-obj-$(CONFIG_FB_CONTROL)          += controlfb.o
-obj-$(CONFIG_FB_PLATINUM)         += platinumfb.o
-obj-$(CONFIG_FB_VALKYRIE)         += valkyriefb.o
-obj-$(CONFIG_FB_CT65550)          += chipsfb.o
-obj-$(CONFIG_FB_IMSTT)            += imsttfb.o
-obj-$(CONFIG_FB_FM2)              += fm2fb.o
-obj-$(CONFIG_FB_VT8623)           += vt8623fb.o
-obj-$(CONFIG_FB_TRIDENT)          += tridentfb.o
-obj-$(CONFIG_FB_LE80578)          += vermilion/
-obj-$(CONFIG_FB_S3)               += s3fb.o
-obj-$(CONFIG_FB_ARK)              += arkfb.o
-obj-$(CONFIG_FB_STI)              += stifb.o
-obj-$(CONFIG_FB_FFB)              += ffb.o sbuslib.o
-obj-$(CONFIG_FB_CG6)              += cg6.o sbuslib.o
-obj-$(CONFIG_FB_CG3)              += cg3.o sbuslib.o
-obj-$(CONFIG_FB_BW2)              += bw2.o sbuslib.o
-obj-$(CONFIG_FB_CG14)             += cg14.o sbuslib.o
-obj-$(CONFIG_FB_P9100)            += p9100.o sbuslib.o
-obj-$(CONFIG_FB_TCX)              += tcx.o sbuslib.o
-obj-$(CONFIG_FB_LEO)              += leo.o sbuslib.o
-obj-$(CONFIG_FB_SGIVW)            += sgivwfb.o
-obj-$(CONFIG_FB_ACORN)            += acornfb.o
-obj-$(CONFIG_FB_ATARI)            += atafb.o c2p_iplan2.o atafb_mfb.o \
-                                     atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
-obj-$(CONFIG_FB_MAC)              += macfb.o
-obj-$(CONFIG_FB_HECUBA)           += hecubafb.o
-obj-$(CONFIG_FB_N411)             += n411.o
-obj-$(CONFIG_FB_HGA)              += hgafb.o
-obj-$(CONFIG_FB_XVR500)           += sunxvr500.o
-obj-$(CONFIG_FB_XVR2500)          += sunxvr2500.o
-obj-$(CONFIG_FB_XVR1000)          += sunxvr1000.o
-obj-$(CONFIG_FB_IGA)              += igafb.o
-obj-$(CONFIG_FB_APOLLO)           += dnfb.o
-obj-$(CONFIG_FB_Q40)              += q40fb.o
-obj-$(CONFIG_FB_TGA)              += tgafb.o
-obj-$(CONFIG_FB_HP300)            += hpfb.o
-obj-$(CONFIG_FB_G364)             += g364fb.o
-obj-$(CONFIG_FB_EP93XX)		  += ep93xx-fb.o
-obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
-obj-$(CONFIG_FB_HIT)              += hitfb.o
-obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
-obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
-obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
-obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
-obj-$(CONFIG_FB_GOLDFISH)         += goldfishfb.o
-obj-$(CONFIG_FB_68328)            += 68328fb.o
-obj-$(CONFIG_FB_GBE)              += gbefb.o
-obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
-obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
-obj-$(CONFIG_FB_PXA)		  += pxafb.o
-obj-$(CONFIG_FB_PXA168)		  += pxa168fb.o
-obj-$(CONFIG_PXA3XX_GCU)	  += pxa3xx-gcu.o
-obj-$(CONFIG_MMP_DISP)           += mmp/
-obj-$(CONFIG_FB_W100)		  += w100fb.o
-obj-$(CONFIG_FB_TMIO)		  += tmiofb.o
-obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
-obj-$(CONFIG_FB_AU1200)		  += au1200fb.o
-obj-$(CONFIG_FB_VT8500)		  += vt8500lcdfb.o
-obj-$(CONFIG_FB_WM8505)		  += wm8505fb.o
-obj-$(CONFIG_FB_PMAG_AA)	  += pmag-aa-fb.o
-obj-$(CONFIG_FB_PMAG_BA)	  += pmag-ba-fb.o
-obj-$(CONFIG_FB_PMAGB_B)	  += pmagb-b-fb.o
-obj-$(CONFIG_FB_MAXINE)		  += maxinefb.o
-obj-$(CONFIG_FB_METRONOME)        += metronomefb.o
-obj-$(CONFIG_FB_BROADSHEET)       += broadsheetfb.o
-obj-$(CONFIG_FB_AUO_K190X)	  += auo_k190x.o
-obj-$(CONFIG_FB_AUO_K1900)	  += auo_k1900fb.o
-obj-$(CONFIG_FB_AUO_K1901)	  += auo_k1901fb.o
-obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
-obj-$(CONFIG_FB_SH7760)		  += sh7760fb.o
-obj-$(CONFIG_FB_IMX)              += imxfb.o
-obj-$(CONFIG_FB_S3C)		  += s3c-fb.o
-obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
-obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
-obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
-obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
-obj-$(CONFIG_FB_PS3)		  += ps3fb.o
-obj-$(CONFIG_FB_SM501)            += sm501fb.o
-obj-$(CONFIG_FB_UDL)		  += udlfb.o
-obj-$(CONFIG_FB_SMSCUFX)	  += smscufx.o
-obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
-obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
-obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o
-obj-$(CONFIG_FB_SH_MOBILE_MERAM)  += sh_mobile_meram.o
-obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
-obj-$(CONFIG_FB_OMAP)             += omap/
-obj-y                             += omap2/
-obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
-obj-$(CONFIG_FB_CARMINE)          += carminefb.o
-obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
-obj-$(CONFIG_FB_MSM)              += msm/
-obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
-obj-$(CONFIG_FB_JZ4740)		  += jz4740_fb.o
-obj-$(CONFIG_FB_PUV3_UNIGFX)      += fb-puv3.o
-obj-$(CONFIG_FB_HYPERV)		  += hyperv_fb.o
-obj-$(CONFIG_FB_OPENCORES)	  += ocfb.o
-
-# Platform or fallback drivers go here
-obj-$(CONFIG_FB_UVESA)            += uvesafb.o
-obj-$(CONFIG_FB_VESA)             += vesafb.o
-obj-$(CONFIG_FB_EFI)              += efifb.o
-obj-$(CONFIG_FB_VGA16)            += vga16fb.o
-obj-$(CONFIG_FB_OF)               += offb.o
-obj-$(CONFIG_FB_BF537_LQ035)      += bf537-lq035.o
-obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
-obj-$(CONFIG_FB_BFIN_LQ035Q1)     += bfin-lq035q1-fb.o
-obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
-obj-$(CONFIG_FB_BFIN_7393)        += bfin_adv7393fb.o
-obj-$(CONFIG_FB_MX3)		  += mx3fb.o
-obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
-obj-$(CONFIG_FB_MXS)		  += mxsfb.o
-obj-$(CONFIG_FB_SSD1307)	  += ssd1307fb.o
-obj-$(CONFIG_FB_SIMPLE)           += simplefb.o
-
-# the test framebuffer is last
-obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
+obj-y				  += fbdev/
 
-#video output switch sysfs driver
-obj-$(CONFIG_VIDEO_OUTPUT_CONTROL) += output.o
 obj-$(CONFIG_VIDEOMODE_HELPERS) += display_timing.o videomode.o
 ifeq ($(CONFIG_OF),y)
 obj-$(CONFIG_VIDEOMODE_HELPERS) += of_display_timing.o of_videomode.o
diff --git a/drivers/video/backlight/aat2870_bl.c b/drivers/video/backlight/aat2870_bl.c
index ee0c0a982e4e..ec5350f2c28a 100644
--- a/drivers/video/backlight/aat2870_bl.c
+++ b/drivers/video/backlight/aat2870_bl.c
@@ -149,8 +149,6 @@ static int aat2870_bl_probe(struct platform_device *pdev)
 				  sizeof(struct aat2870_bl_driver_data),
 				  GFP_KERNEL);
 	if (!aat2870_bl) {
-		dev_err(&pdev->dev,
-			"Failed to allocate memory for aat2870 backlight\n");
 		ret = -ENOMEM;
 		goto out;
 	}
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index 9d656717d0f7..be8d83deca7d 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -224,10 +224,8 @@ static int adp8860_led_probe(struct i2c_client *client)
 
 	led = devm_kzalloc(&client->dev, sizeof(*led) * pdata->num_leds,
 				GFP_KERNEL);
-	if (led == NULL) {
-		dev_err(&client->dev, "failed to alloc memory\n");
+	if (led == NULL)
 		return -ENOMEM;
-	}
 
 	ret = adp8860_write(client, ADP8860_ISCFR, pdata->led_fade_law);
 	ret = adp8860_write(client, ADP8860_ISCT1,
diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c
index 63707205326b..251af4d38d86 100644
--- a/drivers/video/backlight/adp8870_bl.c
+++ b/drivers/video/backlight/adp8870_bl.c
@@ -246,10 +246,8 @@ static int adp8870_led_probe(struct i2c_client *client)
 
 	led = devm_kzalloc(&client->dev, pdata->num_leds * sizeof(*led),
 				GFP_KERNEL);
-	if (led == NULL) {
-		dev_err(&client->dev, "failed to alloc memory\n");
+	if (led == NULL)
 		return -ENOMEM;
-	}
 
 	ret = adp8870_write(client, ADP8870_ISCLAW, pdata->led_fade_law);
 	if (ret)
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 5d05555fe841..bd2172c2d650 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -34,13 +34,15 @@ static const char *const backlight_types[] = {
 			   defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE))
 /* This callback gets called when something important happens inside a
  * framebuffer driver. We're looking if that important event is blanking,
- * and if it is, we're switching backlight power as well ...
+ * and if it is and necessary, we're switching backlight power as well ...
  */
 static int fb_notifier_callback(struct notifier_block *self,
 				unsigned long event, void *data)
 {
 	struct backlight_device *bd;
 	struct fb_event *evdata = data;
+	int node = evdata->info->node;
+	int fb_blank = 0;
 
 	/* If we aren't interested in this event, skip it immediately ... */
 	if (event != FB_EVENT_BLANK && event != FB_EVENT_CONBLANK)
@@ -51,12 +53,24 @@ static int fb_notifier_callback(struct notifier_block *self,
 	if (bd->ops)
 		if (!bd->ops->check_fb ||
 		    bd->ops->check_fb(bd, evdata->info)) {
-			bd->props.fb_blank = *(int *)evdata->data;
-			if (bd->props.fb_blank == FB_BLANK_UNBLANK)
-				bd->props.state &= ~BL_CORE_FBBLANK;
-			else
-				bd->props.state |= BL_CORE_FBBLANK;
-			backlight_update_status(bd);
+			fb_blank = *(int *)evdata->data;
+			if (fb_blank == FB_BLANK_UNBLANK &&
+			    !bd->fb_bl_on[node]) {
+				bd->fb_bl_on[node] = true;
+				if (!bd->use_count++) {
+					bd->props.state &= ~BL_CORE_FBBLANK;
+					bd->props.fb_blank = FB_BLANK_UNBLANK;
+					backlight_update_status(bd);
+				}
+			} else if (fb_blank != FB_BLANK_UNBLANK &&
+				   bd->fb_bl_on[node]) {
+				bd->fb_bl_on[node] = false;
+				if (!(--bd->use_count)) {
+					bd->props.state |= BL_CORE_FBBLANK;
+					bd->props.fb_blank = fb_blank;
+					backlight_update_status(bd);
+				}
+			}
 		}
 	mutex_unlock(&bd->ops_lock);
 	return 0;
@@ -333,7 +347,7 @@ struct backlight_device *backlight_device_register(const char *name,
 
 	rc = device_register(&new_bd->dev);
 	if (rc) {
-		kfree(new_bd);
+		put_device(&new_bd->dev);
 		return ERR_PTR(rc);
 	}
 
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index db8db5fa6583..51d18d637e2b 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -543,10 +543,8 @@ static int corgi_lcd_probe(struct spi_device *spi)
 	}
 
 	lcd = devm_kzalloc(&spi->dev, sizeof(struct corgi_lcd), GFP_KERNEL);
-	if (!lcd) {
-		dev_err(&spi->dev, "failed to allocate memory\n");
+	if (!lcd)
 		return -ENOMEM;
-	}
 
 	lcd->spi_dev = spi;
 
diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c
index 81fb12770c2a..a2eba12e1cb7 100644
--- a/drivers/video/backlight/gpio_backlight.c
+++ b/drivers/video/backlight/gpio_backlight.c
@@ -13,6 +13,8 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/platform_data/gpio_backlight.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -23,6 +25,7 @@ struct gpio_backlight {
 
 	int gpio;
 	int active;
+	int def_value;
 };
 
 static int gpio_backlight_update_status(struct backlight_device *bl)
@@ -60,6 +63,29 @@ static const struct backlight_ops gpio_backlight_ops = {
 	.check_fb	= gpio_backlight_check_fb,
 };
 
+static int gpio_backlight_probe_dt(struct platform_device *pdev,
+				   struct gpio_backlight *gbl)
+{
+	struct device_node *np = pdev->dev.of_node;
+	enum of_gpio_flags gpio_flags;
+
+	gbl->gpio = of_get_gpio_flags(np, 0, &gpio_flags);
+
+	if (!gpio_is_valid(gbl->gpio)) {
+		if (gbl->gpio != -EPROBE_DEFER) {
+			dev_err(&pdev->dev,
+				"Error: The gpios parameter is missing or invalid.\n");
+		}
+		return gbl->gpio;
+	}
+
+	gbl->active = (gpio_flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1;
+
+	gbl->def_value = of_property_read_bool(np, "default-on");
+
+	return 0;
+}
+
 static int gpio_backlight_probe(struct platform_device *pdev)
 {
 	struct gpio_backlight_platform_data *pdata =
@@ -67,10 +93,12 @@ static int gpio_backlight_probe(struct platform_device *pdev)
 	struct backlight_properties props;
 	struct backlight_device *bl;
 	struct gpio_backlight *gbl;
+	struct device_node *np = pdev->dev.of_node;
 	int ret;
 
-	if (!pdata) {
-		dev_err(&pdev->dev, "failed to find platform data\n");
+	if (!pdata && !np) {
+		dev_err(&pdev->dev,
+			"failed to find platform data or device tree node.\n");
 		return -ENODEV;
 	}
 
@@ -79,14 +107,22 @@ static int gpio_backlight_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	gbl->dev = &pdev->dev;
-	gbl->fbdev = pdata->fbdev;
-	gbl->gpio = pdata->gpio;
-	gbl->active = pdata->active_low ? 0 : 1;
+
+	if (np) {
+		ret = gpio_backlight_probe_dt(pdev, gbl);
+		if (ret)
+			return ret;
+	} else {
+		gbl->fbdev = pdata->fbdev;
+		gbl->gpio = pdata->gpio;
+		gbl->active = pdata->active_low ? 0 : 1;
+		gbl->def_value = pdata->def_value;
+	}
 
 	ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT |
 				    (gbl->active ? GPIOF_INIT_LOW
 						 : GPIOF_INIT_HIGH),
-				    pdata->name);
+				    pdata ? pdata->name : "backlight");
 	if (ret < 0) {
 		dev_err(&pdev->dev, "unable to request GPIO\n");
 		return ret;
@@ -103,17 +139,25 @@ static int gpio_backlight_probe(struct platform_device *pdev)
 		return PTR_ERR(bl);
 	}
 
-	bl->props.brightness = pdata->def_value;
+	bl->props.brightness = gbl->def_value;
 	backlight_update_status(bl);
 
 	platform_set_drvdata(pdev, bl);
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id gpio_backlight_of_match[] = {
+	{ .compatible = "gpio-backlight" },
+	{ /* sentinel */ }
+};
+#endif
+
 static struct platform_driver gpio_backlight_driver = {
 	.driver		= {
 		.name		= "gpio-backlight",
 		.owner		= THIS_MODULE,
+		.of_match_table = of_match_ptr(gpio_backlight_of_match),
 	},
 	.probe		= gpio_backlight_probe,
 };
diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index 985e854e244b..23f50b92a930 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -587,10 +587,8 @@ static int hx8357_probe(struct spi_device *spi)
 	int i, ret;
 
 	lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
-	if (!lcd) {
-		dev_err(&spi->dev, "Couldn't allocate lcd internal structure!\n");
+	if (!lcd)
 		return -ENOMEM;
-	}
 
 	ret = spi_setup(spi);
 	if (ret < 0) {
diff --git a/drivers/video/backlight/ili922x.c b/drivers/video/backlight/ili922x.c
index 73464e4b4c74..ea67fe199e34 100644
--- a/drivers/video/backlight/ili922x.c
+++ b/drivers/video/backlight/ili922x.c
@@ -482,10 +482,8 @@ static int ili922x_probe(struct spi_device *spi)
 	u16 reg = 0;
 
 	ili = devm_kzalloc(&spi->dev, sizeof(*ili), GFP_KERNEL);
-	if (!ili) {
-		dev_err(&spi->dev, "cannot alloc priv data\n");
+	if (!ili)
 		return -ENOMEM;
-	}
 
 	ili->spi = spi;
 	spi_set_drvdata(spi, ili);
diff --git a/drivers/video/backlight/ili9320.c b/drivers/video/backlight/ili9320.c
index e2b8b40a9bd9..2cf39e6d519d 100644
--- a/drivers/video/backlight/ili9320.c
+++ b/drivers/video/backlight/ili9320.c
@@ -219,10 +219,8 @@ int ili9320_probe_spi(struct spi_device *spi,
 	/* allocate and initialse our state */
 
 	ili = devm_kzalloc(&spi->dev, sizeof(struct ili9320), GFP_KERNEL);
-	if (ili == NULL) {
-		dev_err(dev, "no memory for device\n");
+	if (ili == NULL)
 		return -ENOMEM;
-	}
 
 	ili->access.spi.id = ILI9320_SPI_IDCODE | ILI9320_SPI_ID(1);
 
diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
index 63e763828e0e..5fa2649c9631 100644
--- a/drivers/video/backlight/l4f00242t03.c
+++ b/drivers/video/backlight/l4f00242t03.c
@@ -181,11 +181,8 @@ static int l4f00242t03_probe(struct spi_device *spi)
 
 	priv = devm_kzalloc(&spi->dev, sizeof(struct l4f00242t03_priv),
 				GFP_KERNEL);
-
-	if (priv == NULL) {
-		dev_err(&spi->dev, "No memory for this device.\n");
+	if (priv == NULL)
 		return -ENOMEM;
-	}
 
 	spi_set_drvdata(spi, priv);
 	spi->bits_per_word = 9;
diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
index 187d1c283c1d..cff1fbe89a1b 100644
--- a/drivers/video/backlight/lm3533_bl.c
+++ b/drivers/video/backlight/lm3533_bl.c
@@ -296,11 +296,8 @@ static int lm3533_bl_probe(struct platform_device *pdev)
 	}
 
 	bl = devm_kzalloc(&pdev->dev, sizeof(*bl), GFP_KERNEL);
-	if (!bl) {
-		dev_err(&pdev->dev,
-				"failed to allocate memory for backlight\n");
+	if (!bl)
 		return -ENOMEM;
-	}
 
 	bl->lm3533 = lm3533;
 	bl->id = pdev->id;
diff --git a/drivers/video/backlight/lm3639_bl.c b/drivers/video/backlight/lm3639_bl.c
index 6fd60adf922e..5f36808d214f 100644
--- a/drivers/video/backlight/lm3639_bl.c
+++ b/drivers/video/backlight/lm3639_bl.c
@@ -349,8 +349,9 @@ static int lm3639_probe(struct i2c_client *client,
 	props.brightness = pdata->init_brt_led;
 	props.max_brightness = pdata->max_brt_led;
 	pchip->bled =
-	    backlight_device_register("lm3639_bled", pchip->dev, pchip,
-				      &lm3639_bled_ops, &props);
+	    devm_backlight_device_register(pchip->dev, "lm3639_bled",
+					   pchip->dev, pchip, &lm3639_bled_ops,
+					   &props);
 	if (IS_ERR(pchip->bled)) {
 		dev_err(&client->dev, "fail : backlight register\n");
 		ret = PTR_ERR(pchip->bled);
@@ -360,7 +361,7 @@ static int lm3639_probe(struct i2c_client *client,
 	ret = device_create_file(&(pchip->bled->dev), &dev_attr_bled_mode);
 	if (ret < 0) {
 		dev_err(&client->dev, "failed : add sysfs entries\n");
-		goto err_bled_mode;
+		goto err_out;
 	}
 
 	/* flash */
@@ -391,8 +392,6 @@ err_torch:
 	led_classdev_unregister(&pchip->cdev_flash);
 err_flash:
 	device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
-err_bled_mode:
-	backlight_device_unregister(pchip->bled);
 err_out:
 	return ret;
 }
@@ -407,10 +406,8 @@ static int lm3639_remove(struct i2c_client *client)
 		led_classdev_unregister(&pchip->cdev_torch);
 	if (&pchip->cdev_flash)
 		led_classdev_unregister(&pchip->cdev_flash);
-	if (pchip->bled) {
+	if (pchip->bled)
 		device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
-		backlight_device_unregister(pchip->bled);
-	}
 	return 0;
 }
 
@@ -432,6 +429,6 @@ static struct i2c_driver lm3639_i2c_driver = {
 module_i2c_driver(lm3639_i2c_driver);
 
 MODULE_DESCRIPTION("Texas Instruments Backlight+Flash LED driver for LM3639");
-MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
-MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
+MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
+MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c
index de8832504f68..14590c54aedf 100644
--- a/drivers/video/backlight/lms283gf05.c
+++ b/drivers/video/backlight/lms283gf05.c
@@ -168,10 +168,8 @@ static int lms283gf05_probe(struct spi_device *spi)
 
 	st = devm_kzalloc(&spi->dev, sizeof(struct lms283gf05_state),
 				GFP_KERNEL);
-	if (st == NULL) {
-		dev_err(&spi->dev, "No memory for device state\n");
+	if (st == NULL)
 		return -ENOMEM;
-	}
 
 	ld = devm_lcd_device_register(&spi->dev, "lms283gf05", &spi->dev, st,
 					&lms_ops);
diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c
index d01884d4f1bf..c3d2e209fc8f 100644
--- a/drivers/video/backlight/platform_lcd.c
+++ b/drivers/video/backlight/platform_lcd.c
@@ -94,10 +94,8 @@ static int platform_lcd_probe(struct platform_device *pdev)
 
 	plcd = devm_kzalloc(&pdev->dev, sizeof(struct platform_lcd),
 			    GFP_KERNEL);
-	if (!plcd) {
-		dev_err(dev, "no memory for state\n");
+	if (!plcd)
 		return -ENOMEM;
-	}
 
 	plcd->us = dev;
 	plcd->pdata = pdata;
diff --git a/drivers/video/backlight/tps65217_bl.c b/drivers/video/backlight/tps65217_bl.c
index cbba37e6836e..595dcf561020 100644
--- a/drivers/video/backlight/tps65217_bl.c
+++ b/drivers/video/backlight/tps65217_bl.c
@@ -200,7 +200,6 @@ tps65217_bl_parse_dt(struct platform_device *pdev)
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata) {
-		dev_err(&pdev->dev, "failed to allocate platform data\n");
 		err = ERR_PTR(-ENOMEM);
 		goto err;
 	}
@@ -296,10 +295,8 @@ static int tps65217_bl_probe(struct platform_device *pdev)
 
 	tps65217_bl = devm_kzalloc(&pdev->dev, sizeof(*tps65217_bl),
 				GFP_KERNEL);
-	if (tps65217_bl == NULL) {
-		dev_err(&pdev->dev, "allocation of struct tps65217_bl failed\n");
+	if (tps65217_bl == NULL)
 		return -ENOMEM;
-	}
 
 	tps65217_bl->tps = tps;
 	tps65217_bl->dev = &pdev->dev;
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 4e39291ac8b4..f447734b09b4 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -759,7 +759,7 @@ static int con2fb_release_oldinfo(struct vc_data *vc, struct fb_info *oldinfo,
 		  newinfo in an undefined state. Thus, a call to
 		  fb_set_par() may be needed for the newinfo.
 		*/
-		if (newinfo->fbops->fb_set_par) {
+		if (newinfo && newinfo->fbops->fb_set_par) {
 			ret = newinfo->fbops->fb_set_par(newinfo);
 
 			if (ret)
@@ -3028,8 +3028,31 @@ static int fbcon_fb_unbind(int idx)
 			if (con2fb_map[i] == idx)
 				set_con2fb_map(i, new_idx, 0);
 		}
-	} else
+	} else {
+		struct fb_info *info = registered_fb[idx];
+
+		/* This is sort of like set_con2fb_map, except it maps
+		 * the consoles to no device and then releases the
+		 * oldinfo to free memory and cancel the cursor blink
+		 * timer. I can imagine this just becoming part of
+		 * set_con2fb_map where new_idx is -1
+		 */
+		for (i = first_fb_vc; i <= last_fb_vc; i++) {
+			if (con2fb_map[i] == idx) {
+				con2fb_map[i] = -1;
+				if (!search_fb_in_map(idx)) {
+					ret = con2fb_release_oldinfo(vc_cons[i].d,
+								     info, NULL, i,
+								     idx, 0);
+					if (ret) {
+						con2fb_map[i] = idx;
+						return ret;
+					}
+				}
+			}
+		}
 		ret = fbcon_unbind();
+	}
 
 	return ret;
 }
diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c
index 5f65ca3d8564..026fd1215933 100644
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -46,7 +46,7 @@
 
 #include <asm/io.h>
 
-#include "../sticore.h"
+#include "../fbdev/sticore.h"
 
 /* switching to graphics mode */
 #define BLANK 0
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index cecd3de01c24..7da1ad03acb5 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -28,7 +28,7 @@
 #include <asm/cacheflush.h>
 #include <asm/grfioctl.h>
 
-#include "../sticore.h"
+#include "../fbdev/sticore.h"
 
 #define STI_DRIVERVERSION "Version 0.9b"
 
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
deleted file mode 100644
index 5e1a71580051..000000000000
--- a/drivers/video/exynos/exynos_dp_core.c
+++ /dev/null
@@ -1,1156 +0,0 @@
-/*
- * Samsung SoC DP (Display Port) interface driver.
- *
- * Copyright (C) 2012 Samsung Electronics Co., Ltd.
- * Author: Jingoo Han <jg1.han@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/phy/phy.h>
-
-#include "exynos_dp_core.h"
-
-static int exynos_dp_init_dp(struct exynos_dp_device *dp)
-{
-	exynos_dp_reset(dp);
-
-	exynos_dp_swreset(dp);
-
-	exynos_dp_init_analog_param(dp);
-	exynos_dp_init_interrupt(dp);
-
-	/* SW defined function Normal operation */
-	exynos_dp_enable_sw_function(dp);
-
-	exynos_dp_config_interrupt(dp);
-	exynos_dp_init_analog_func(dp);
-
-	exynos_dp_init_hpd(dp);
-	exynos_dp_init_aux(dp);
-
-	return 0;
-}
-
-static int exynos_dp_detect_hpd(struct exynos_dp_device *dp)
-{
-	int timeout_loop = 0;
-
-	while (exynos_dp_get_plug_in_status(dp) != 0) {
-		timeout_loop++;
-		if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
-			dev_err(dp->dev, "failed to get hpd plug status\n");
-			return -ETIMEDOUT;
-		}
-		usleep_range(10, 11);
-	}
-
-	return 0;
-}
-
-static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data)
-{
-	int i;
-	unsigned char sum = 0;
-
-	for (i = 0; i < EDID_BLOCK_LENGTH; i++)
-		sum = sum + edid_data[i];
-
-	return sum;
-}
-
-static int exynos_dp_read_edid(struct exynos_dp_device *dp)
-{
-	unsigned char edid[EDID_BLOCK_LENGTH * 2];
-	unsigned int extend_block = 0;
-	unsigned char sum;
-	unsigned char test_vector;
-	int retval;
-
-	/*
-	 * EDID device address is 0x50.
-	 * However, if necessary, you must have set upper address
-	 * into E-EDID in I2C device, 0x30.
-	 */
-
-	/* Read Extension Flag, Number of 128-byte EDID extension blocks */
-	retval = exynos_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
-				EDID_EXTENSION_FLAG,
-				&extend_block);
-	if (retval)
-		return retval;
-
-	if (extend_block > 0) {
-		dev_dbg(dp->dev, "EDID data includes a single extension!\n");
-
-		/* Read EDID data */
-		retval = exynos_dp_read_bytes_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
-						EDID_HEADER_PATTERN,
-						EDID_BLOCK_LENGTH,
-						&edid[EDID_HEADER_PATTERN]);
-		if (retval != 0) {
-			dev_err(dp->dev, "EDID Read failed!\n");
-			return -EIO;
-		}
-		sum = exynos_dp_calc_edid_check_sum(edid);
-		if (sum != 0) {
-			dev_err(dp->dev, "EDID bad checksum!\n");
-			return -EIO;
-		}
-
-		/* Read additional EDID data */
-		retval = exynos_dp_read_bytes_from_i2c(dp,
-				I2C_EDID_DEVICE_ADDR,
-				EDID_BLOCK_LENGTH,
-				EDID_BLOCK_LENGTH,
-				&edid[EDID_BLOCK_LENGTH]);
-		if (retval != 0) {
-			dev_err(dp->dev, "EDID Read failed!\n");
-			return -EIO;
-		}
-		sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]);
-		if (sum != 0) {
-			dev_err(dp->dev, "EDID bad checksum!\n");
-			return -EIO;
-		}
-
-		exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_TEST_REQUEST,
-					&test_vector);
-		if (test_vector & DPCD_TEST_EDID_READ) {
-			exynos_dp_write_byte_to_dpcd(dp,
-				DPCD_ADDR_TEST_EDID_CHECKSUM,
-				edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]);
-			exynos_dp_write_byte_to_dpcd(dp,
-				DPCD_ADDR_TEST_RESPONSE,
-				DPCD_TEST_EDID_CHECKSUM_WRITE);
-		}
-	} else {
-		dev_info(dp->dev, "EDID data does not include any extensions.\n");
-
-		/* Read EDID data */
-		retval = exynos_dp_read_bytes_from_i2c(dp,
-				I2C_EDID_DEVICE_ADDR,
-				EDID_HEADER_PATTERN,
-				EDID_BLOCK_LENGTH,
-				&edid[EDID_HEADER_PATTERN]);
-		if (retval != 0) {
-			dev_err(dp->dev, "EDID Read failed!\n");
-			return -EIO;
-		}
-		sum = exynos_dp_calc_edid_check_sum(edid);
-		if (sum != 0) {
-			dev_err(dp->dev, "EDID bad checksum!\n");
-			return -EIO;
-		}
-
-		exynos_dp_read_byte_from_dpcd(dp,
-			DPCD_ADDR_TEST_REQUEST,
-			&test_vector);
-		if (test_vector & DPCD_TEST_EDID_READ) {
-			exynos_dp_write_byte_to_dpcd(dp,
-				DPCD_ADDR_TEST_EDID_CHECKSUM,
-				edid[EDID_CHECKSUM]);
-			exynos_dp_write_byte_to_dpcd(dp,
-				DPCD_ADDR_TEST_RESPONSE,
-				DPCD_TEST_EDID_CHECKSUM_WRITE);
-		}
-	}
-
-	dev_err(dp->dev, "EDID Read success!\n");
-	return 0;
-}
-
-static int exynos_dp_handle_edid(struct exynos_dp_device *dp)
-{
-	u8 buf[12];
-	int i;
-	int retval;
-
-	/* Read DPCD DPCD_ADDR_DPCD_REV~RECEIVE_PORT1_CAP_1 */
-	retval = exynos_dp_read_bytes_from_dpcd(dp, DPCD_ADDR_DPCD_REV,
-				12, buf);
-	if (retval)
-		return retval;
-
-	/* Read EDID */
-	for (i = 0; i < 3; i++) {
-		retval = exynos_dp_read_edid(dp);
-		if (!retval)
-			break;
-	}
-
-	return retval;
-}
-
-static void exynos_dp_enable_rx_to_enhanced_mode(struct exynos_dp_device *dp,
-						bool enable)
-{
-	u8 data;
-
-	exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, &data);
-
-	if (enable)
-		exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET,
-			DPCD_ENHANCED_FRAME_EN |
-			DPCD_LANE_COUNT_SET(data));
-	else
-		exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET,
-			DPCD_LANE_COUNT_SET(data));
-}
-
-static int exynos_dp_is_enhanced_mode_available(struct exynos_dp_device *dp)
-{
-	u8 data;
-	int retval;
-
-	exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data);
-	retval = DPCD_ENHANCED_FRAME_CAP(data);
-
-	return retval;
-}
-
-static void exynos_dp_set_enhanced_mode(struct exynos_dp_device *dp)
-{
-	u8 data;
-
-	data = exynos_dp_is_enhanced_mode_available(dp);
-	exynos_dp_enable_rx_to_enhanced_mode(dp, data);
-	exynos_dp_enable_enhanced_mode(dp, data);
-}
-
-static void exynos_dp_training_pattern_dis(struct exynos_dp_device *dp)
-{
-	exynos_dp_set_training_pattern(dp, DP_NONE);
-
-	exynos_dp_write_byte_to_dpcd(dp,
-		DPCD_ADDR_TRAINING_PATTERN_SET,
-		DPCD_TRAINING_PATTERN_DISABLED);
-}
-
-static void exynos_dp_set_lane_lane_pre_emphasis(struct exynos_dp_device *dp,
-					int pre_emphasis, int lane)
-{
-	switch (lane) {
-	case 0:
-		exynos_dp_set_lane0_pre_emphasis(dp, pre_emphasis);
-		break;
-	case 1:
-		exynos_dp_set_lane1_pre_emphasis(dp, pre_emphasis);
-		break;
-
-	case 2:
-		exynos_dp_set_lane2_pre_emphasis(dp, pre_emphasis);
-		break;
-
-	case 3:
-		exynos_dp_set_lane3_pre_emphasis(dp, pre_emphasis);
-		break;
-	}
-}
-
-static int exynos_dp_link_start(struct exynos_dp_device *dp)
-{
-	u8 buf[4];
-	int lane, lane_count, pll_tries, retval;
-
-	lane_count = dp->link_train.lane_count;
-
-	dp->link_train.lt_state = CLOCK_RECOVERY;
-	dp->link_train.eq_loop = 0;
-
-	for (lane = 0; lane < lane_count; lane++)
-		dp->link_train.cr_loop[lane] = 0;
-
-	/* Set link rate and count as you want to establish*/
-	exynos_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
-	exynos_dp_set_lane_count(dp, dp->link_train.lane_count);
-
-	/* Setup RX configuration */
-	buf[0] = dp->link_train.link_rate;
-	buf[1] = dp->link_train.lane_count;
-	retval = exynos_dp_write_bytes_to_dpcd(dp, DPCD_ADDR_LINK_BW_SET,
-				2, buf);
-	if (retval)
-		return retval;
-
-	/* Set TX pre-emphasis to minimum */
-	for (lane = 0; lane < lane_count; lane++)
-		exynos_dp_set_lane_lane_pre_emphasis(dp,
-			PRE_EMPHASIS_LEVEL_0, lane);
-
-	/* Wait for PLL lock */
-	pll_tries = 0;
-	while (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
-		if (pll_tries == DP_TIMEOUT_LOOP_COUNT) {
-			dev_err(dp->dev, "Wait for PLL lock timed out\n");
-			return -ETIMEDOUT;
-		}
-
-		pll_tries++;
-		usleep_range(90, 120);
-	}
-
-	/* Set training pattern 1 */
-	exynos_dp_set_training_pattern(dp, TRAINING_PTN1);
-
-	/* Set RX training pattern */
-	retval = exynos_dp_write_byte_to_dpcd(dp,
-			DPCD_ADDR_TRAINING_PATTERN_SET,
-			DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1);
-	if (retval)
-		return retval;
-
-	for (lane = 0; lane < lane_count; lane++)
-		buf[lane] = DPCD_PRE_EMPHASIS_PATTERN2_LEVEL0 |
-			    DPCD_VOLTAGE_SWING_PATTERN1_LEVEL0;
-
-	retval = exynos_dp_write_bytes_to_dpcd(dp, DPCD_ADDR_TRAINING_LANE0_SET,
-			lane_count, buf);
-
-	return retval;
-}
-
-static unsigned char exynos_dp_get_lane_status(u8 link_status[2], int lane)
-{
-	int shift = (lane & 1) * 4;
-	u8 link_value = link_status[lane>>1];
-
-	return (link_value >> shift) & 0xf;
-}
-
-static int exynos_dp_clock_recovery_ok(u8 link_status[2], int lane_count)
-{
-	int lane;
-	u8 lane_status;
-
-	for (lane = 0; lane < lane_count; lane++) {
-		lane_status = exynos_dp_get_lane_status(link_status, lane);
-		if ((lane_status & DPCD_LANE_CR_DONE) == 0)
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static int exynos_dp_channel_eq_ok(u8 link_status[2], u8 link_align,
-				int lane_count)
-{
-	int lane;
-	u8 lane_status;
-
-	if ((link_align & DPCD_INTERLANE_ALIGN_DONE) == 0)
-		return -EINVAL;
-
-	for (lane = 0; lane < lane_count; lane++) {
-		lane_status = exynos_dp_get_lane_status(link_status, lane);
-		lane_status &= DPCD_CHANNEL_EQ_BITS;
-		if (lane_status != DPCD_CHANNEL_EQ_BITS)
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static unsigned char exynos_dp_get_adjust_request_voltage(u8 adjust_request[2],
-							int lane)
-{
-	int shift = (lane & 1) * 4;
-	u8 link_value = adjust_request[lane>>1];
-
-	return (link_value >> shift) & 0x3;
-}
-
-static unsigned char exynos_dp_get_adjust_request_pre_emphasis(
-					u8 adjust_request[2],
-					int lane)
-{
-	int shift = (lane & 1) * 4;
-	u8 link_value = adjust_request[lane>>1];
-
-	return ((link_value >> shift) & 0xc) >> 2;
-}
-
-static void exynos_dp_set_lane_link_training(struct exynos_dp_device *dp,
-					u8 training_lane_set, int lane)
-{
-	switch (lane) {
-	case 0:
-		exynos_dp_set_lane0_link_training(dp, training_lane_set);
-		break;
-	case 1:
-		exynos_dp_set_lane1_link_training(dp, training_lane_set);
-		break;
-
-	case 2:
-		exynos_dp_set_lane2_link_training(dp, training_lane_set);
-		break;
-
-	case 3:
-		exynos_dp_set_lane3_link_training(dp, training_lane_set);
-		break;
-	}
-}
-
-static unsigned int exynos_dp_get_lane_link_training(
-				struct exynos_dp_device *dp,
-				int lane)
-{
-	u32 reg;
-
-	switch (lane) {
-	case 0:
-		reg = exynos_dp_get_lane0_link_training(dp);
-		break;
-	case 1:
-		reg = exynos_dp_get_lane1_link_training(dp);
-		break;
-	case 2:
-		reg = exynos_dp_get_lane2_link_training(dp);
-		break;
-	case 3:
-		reg = exynos_dp_get_lane3_link_training(dp);
-		break;
-	default:
-		WARN_ON(1);
-		return 0;
-	}
-
-	return reg;
-}
-
-static void exynos_dp_reduce_link_rate(struct exynos_dp_device *dp)
-{
-	exynos_dp_training_pattern_dis(dp);
-	exynos_dp_set_enhanced_mode(dp);
-
-	dp->link_train.lt_state = FAILED;
-}
-
-static void exynos_dp_get_adjust_training_lane(struct exynos_dp_device *dp,
-					u8 adjust_request[2])
-{
-	int lane, lane_count;
-	u8 voltage_swing, pre_emphasis, training_lane;
-
-	lane_count = dp->link_train.lane_count;
-	for (lane = 0; lane < lane_count; lane++) {
-		voltage_swing = exynos_dp_get_adjust_request_voltage(
-						adjust_request, lane);
-		pre_emphasis = exynos_dp_get_adjust_request_pre_emphasis(
-						adjust_request, lane);
-		training_lane = DPCD_VOLTAGE_SWING_SET(voltage_swing) |
-				DPCD_PRE_EMPHASIS_SET(pre_emphasis);
-
-		if (voltage_swing == VOLTAGE_LEVEL_3)
-			training_lane |= DPCD_MAX_SWING_REACHED;
-		if (pre_emphasis == PRE_EMPHASIS_LEVEL_3)
-			training_lane |= DPCD_MAX_PRE_EMPHASIS_REACHED;
-
-		dp->link_train.training_lane[lane] = training_lane;
-	}
-}
-
-static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
-{
-	int lane, lane_count, retval;
-	u8 voltage_swing, pre_emphasis, training_lane;
-	u8 link_status[2], adjust_request[2];
-
-	usleep_range(100, 101);
-
-	lane_count = dp->link_train.lane_count;
-
-	retval =  exynos_dp_read_bytes_from_dpcd(dp,
-			DPCD_ADDR_LANE0_1_STATUS, 2, link_status);
-	if (retval)
-		return retval;
-
-	retval =  exynos_dp_read_bytes_from_dpcd(dp,
-			DPCD_ADDR_ADJUST_REQUEST_LANE0_1, 2, adjust_request);
-	if (retval)
-		return retval;
-
-	if (exynos_dp_clock_recovery_ok(link_status, lane_count) == 0) {
-		/* set training pattern 2 for EQ */
-		exynos_dp_set_training_pattern(dp, TRAINING_PTN2);
-
-		retval = exynos_dp_write_byte_to_dpcd(dp,
-				DPCD_ADDR_TRAINING_PATTERN_SET,
-				DPCD_SCRAMBLING_DISABLED |
-				DPCD_TRAINING_PATTERN_2);
-		if (retval)
-			return retval;
-
-		dev_info(dp->dev, "Link Training Clock Recovery success\n");
-		dp->link_train.lt_state = EQUALIZER_TRAINING;
-	} else {
-		for (lane = 0; lane < lane_count; lane++) {
-			training_lane = exynos_dp_get_lane_link_training(
-							dp, lane);
-			voltage_swing = exynos_dp_get_adjust_request_voltage(
-							adjust_request, lane);
-			pre_emphasis = exynos_dp_get_adjust_request_pre_emphasis(
-							adjust_request, lane);
-
-			if (DPCD_VOLTAGE_SWING_GET(training_lane) ==
-					voltage_swing &&
-			    DPCD_PRE_EMPHASIS_GET(training_lane) ==
-					pre_emphasis)
-				dp->link_train.cr_loop[lane]++;
-
-			if (dp->link_train.cr_loop[lane] == MAX_CR_LOOP ||
-			    voltage_swing == VOLTAGE_LEVEL_3 ||
-			    pre_emphasis == PRE_EMPHASIS_LEVEL_3) {
-				dev_err(dp->dev, "CR Max reached (%d,%d,%d)\n",
-					dp->link_train.cr_loop[lane],
-					voltage_swing, pre_emphasis);
-				exynos_dp_reduce_link_rate(dp);
-				return -EIO;
-			}
-		}
-	}
-
-	exynos_dp_get_adjust_training_lane(dp, adjust_request);
-
-	for (lane = 0; lane < lane_count; lane++)
-		exynos_dp_set_lane_link_training(dp,
-			dp->link_train.training_lane[lane], lane);
-
-	retval = exynos_dp_write_bytes_to_dpcd(dp,
-			DPCD_ADDR_TRAINING_LANE0_SET, lane_count,
-			dp->link_train.training_lane);
-	if (retval)
-		return retval;
-
-	return retval;
-}
-
-static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
-{
-	int lane, lane_count, retval;
-	u32 reg;
-	u8 link_align, link_status[2], adjust_request[2];
-
-	usleep_range(400, 401);
-
-	lane_count = dp->link_train.lane_count;
-
-	retval = exynos_dp_read_bytes_from_dpcd(dp,
-			DPCD_ADDR_LANE0_1_STATUS, 2, link_status);
-	if (retval)
-		return retval;
-
-	if (exynos_dp_clock_recovery_ok(link_status, lane_count)) {
-		exynos_dp_reduce_link_rate(dp);
-		return -EIO;
-	}
-
-	retval = exynos_dp_read_bytes_from_dpcd(dp,
-			DPCD_ADDR_ADJUST_REQUEST_LANE0_1, 2, adjust_request);
-	if (retval)
-		return retval;
-
-	retval = exynos_dp_read_byte_from_dpcd(dp,
-			DPCD_ADDR_LANE_ALIGN_STATUS_UPDATED, &link_align);
-	if (retval)
-		return retval;
-
-	exynos_dp_get_adjust_training_lane(dp, adjust_request);
-
-	if (!exynos_dp_channel_eq_ok(link_status, link_align, lane_count)) {
-		/* traing pattern Set to Normal */
-		exynos_dp_training_pattern_dis(dp);
-
-		dev_info(dp->dev, "Link Training success!\n");
-
-		exynos_dp_get_link_bandwidth(dp, &reg);
-		dp->link_train.link_rate = reg;
-		dev_dbg(dp->dev, "final bandwidth = %.2x\n",
-			dp->link_train.link_rate);
-
-		exynos_dp_get_lane_count(dp, &reg);
-		dp->link_train.lane_count = reg;
-		dev_dbg(dp->dev, "final lane count = %.2x\n",
-			dp->link_train.lane_count);
-
-		/* set enhanced mode if available */
-		exynos_dp_set_enhanced_mode(dp);
-		dp->link_train.lt_state = FINISHED;
-
-		return 0;
-	}
-
-	/* not all locked */
-	dp->link_train.eq_loop++;
-
-	if (dp->link_train.eq_loop > MAX_EQ_LOOP) {
-		dev_err(dp->dev, "EQ Max loop\n");
-		exynos_dp_reduce_link_rate(dp);
-		return -EIO;
-	}
-
-	for (lane = 0; lane < lane_count; lane++)
-		exynos_dp_set_lane_link_training(dp,
-			dp->link_train.training_lane[lane], lane);
-
-	retval = exynos_dp_write_bytes_to_dpcd(dp, DPCD_ADDR_TRAINING_LANE0_SET,
-			lane_count, dp->link_train.training_lane);
-
-	return retval;
-}
-
-static void exynos_dp_get_max_rx_bandwidth(struct exynos_dp_device *dp,
-					u8 *bandwidth)
-{
-	u8 data;
-
-	/*
-	 * For DP rev.1.1, Maximum link rate of Main Link lanes
-	 * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
-	 */
-	exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LINK_RATE, &data);
-	*bandwidth = data;
-}
-
-static void exynos_dp_get_max_rx_lane_count(struct exynos_dp_device *dp,
-					u8 *lane_count)
-{
-	u8 data;
-
-	/*
-	 * For DP rev.1.1, Maximum number of Main Link lanes
-	 * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes
-	 */
-	exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data);
-	*lane_count = DPCD_MAX_LANE_COUNT(data);
-}
-
-static void exynos_dp_init_training(struct exynos_dp_device *dp,
-			enum link_lane_count_type max_lane,
-			enum link_rate_type max_rate)
-{
-	/*
-	 * MACRO_RST must be applied after the PLL_LOCK to avoid
-	 * the DP inter pair skew issue for at least 10 us
-	 */
-	exynos_dp_reset_macro(dp);
-
-	/* Initialize by reading RX's DPCD */
-	exynos_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
-	exynos_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
-
-	if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
-	   (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
-		dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
-			dp->link_train.link_rate);
-		dp->link_train.link_rate = LINK_RATE_1_62GBPS;
-	}
-
-	if (dp->link_train.lane_count == 0) {
-		dev_err(dp->dev, "Rx Max Lane count is abnormal :%x !\n",
-			dp->link_train.lane_count);
-		dp->link_train.lane_count = (u8)LANE_COUNT1;
-	}
-
-	/* Setup TX lane count & rate */
-	if (dp->link_train.lane_count > max_lane)
-		dp->link_train.lane_count = max_lane;
-	if (dp->link_train.link_rate > max_rate)
-		dp->link_train.link_rate = max_rate;
-
-	/* All DP analog module power up */
-	exynos_dp_set_analog_power_down(dp, POWER_ALL, 0);
-}
-
-static int exynos_dp_sw_link_training(struct exynos_dp_device *dp)
-{
-	int retval = 0, training_finished = 0;
-
-	dp->link_train.lt_state = START;
-
-	/* Process here */
-	while (!retval && !training_finished) {
-		switch (dp->link_train.lt_state) {
-		case START:
-			retval = exynos_dp_link_start(dp);
-			if (retval)
-				dev_err(dp->dev, "LT link start failed!\n");
-			break;
-		case CLOCK_RECOVERY:
-			retval = exynos_dp_process_clock_recovery(dp);
-			if (retval)
-				dev_err(dp->dev, "LT CR failed!\n");
-			break;
-		case EQUALIZER_TRAINING:
-			retval = exynos_dp_process_equalizer_training(dp);
-			if (retval)
-				dev_err(dp->dev, "LT EQ failed!\n");
-			break;
-		case FINISHED:
-			training_finished = 1;
-			break;
-		case FAILED:
-			return -EREMOTEIO;
-		}
-	}
-	if (retval)
-		dev_err(dp->dev, "eDP link training failed (%d)\n", retval);
-
-	return retval;
-}
-
-static int exynos_dp_set_link_train(struct exynos_dp_device *dp,
-				u32 count,
-				u32 bwtype)
-{
-	int i;
-	int retval;
-
-	for (i = 0; i < DP_TIMEOUT_LOOP_COUNT; i++) {
-		exynos_dp_init_training(dp, count, bwtype);
-		retval = exynos_dp_sw_link_training(dp);
-		if (retval == 0)
-			break;
-
-		usleep_range(100, 110);
-	}
-
-	return retval;
-}
-
-static int exynos_dp_config_video(struct exynos_dp_device *dp)
-{
-	int retval = 0;
-	int timeout_loop = 0;
-	int done_count = 0;
-
-	exynos_dp_config_video_slave_mode(dp);
-
-	exynos_dp_set_video_color_format(dp);
-
-	if (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
-		dev_err(dp->dev, "PLL is not locked yet.\n");
-		return -EINVAL;
-	}
-
-	for (;;) {
-		timeout_loop++;
-		if (exynos_dp_is_slave_video_stream_clock_on(dp) == 0)
-			break;
-		if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
-			dev_err(dp->dev, "Timeout of video streamclk ok\n");
-			return -ETIMEDOUT;
-		}
-
-		usleep_range(1, 2);
-	}
-
-	/* Set to use the register calculated M/N video */
-	exynos_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0);
-
-	/* For video bist, Video timing must be generated by register */
-	exynos_dp_set_video_timing_mode(dp, VIDEO_TIMING_FROM_CAPTURE);
-
-	/* Disable video mute */
-	exynos_dp_enable_video_mute(dp, 0);
-
-	/* Configure video slave mode */
-	exynos_dp_enable_video_master(dp, 0);
-
-	/* Enable video */
-	exynos_dp_start_video(dp);
-
-	timeout_loop = 0;
-
-	for (;;) {
-		timeout_loop++;
-		if (exynos_dp_is_video_stream_on(dp) == 0) {
-			done_count++;
-			if (done_count > 10)
-				break;
-		} else if (done_count) {
-			done_count = 0;
-		}
-		if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
-			dev_err(dp->dev, "Timeout of video streamclk ok\n");
-			return -ETIMEDOUT;
-		}
-
-		usleep_range(1000, 1001);
-	}
-
-	if (retval != 0)
-		dev_err(dp->dev, "Video stream is not detected!\n");
-
-	return retval;
-}
-
-static void exynos_dp_enable_scramble(struct exynos_dp_device *dp, bool enable)
-{
-	u8 data;
-
-	if (enable) {
-		exynos_dp_enable_scrambling(dp);
-
-		exynos_dp_read_byte_from_dpcd(dp,
-			DPCD_ADDR_TRAINING_PATTERN_SET,
-			&data);
-		exynos_dp_write_byte_to_dpcd(dp,
-			DPCD_ADDR_TRAINING_PATTERN_SET,
-			(u8)(data & ~DPCD_SCRAMBLING_DISABLED));
-	} else {
-		exynos_dp_disable_scrambling(dp);
-
-		exynos_dp_read_byte_from_dpcd(dp,
-			DPCD_ADDR_TRAINING_PATTERN_SET,
-			&data);
-		exynos_dp_write_byte_to_dpcd(dp,
-			DPCD_ADDR_TRAINING_PATTERN_SET,
-			(u8)(data | DPCD_SCRAMBLING_DISABLED));
-	}
-}
-
-static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
-{
-	struct exynos_dp_device *dp = arg;
-
-	enum dp_irq_type irq_type;
-
-	irq_type = exynos_dp_get_irq_type(dp);
-	switch (irq_type) {
-	case DP_IRQ_TYPE_HP_CABLE_IN:
-		dev_dbg(dp->dev, "Received irq - cable in\n");
-		schedule_work(&dp->hotplug_work);
-		exynos_dp_clear_hotplug_interrupts(dp);
-		break;
-	case DP_IRQ_TYPE_HP_CABLE_OUT:
-		dev_dbg(dp->dev, "Received irq - cable out\n");
-		exynos_dp_clear_hotplug_interrupts(dp);
-		break;
-	case DP_IRQ_TYPE_HP_CHANGE:
-		/*
-		 * We get these change notifications once in a while, but there
-		 * is nothing we can do with them. Just ignore it for now and
-		 * only handle cable changes.
-		 */
-		dev_dbg(dp->dev, "Received irq - hotplug change; ignoring.\n");
-		exynos_dp_clear_hotplug_interrupts(dp);
-		break;
-	default:
-		dev_err(dp->dev, "Received irq - unknown type!\n");
-		break;
-	}
-	return IRQ_HANDLED;
-}
-
-static void exynos_dp_hotplug(struct work_struct *work)
-{
-	struct exynos_dp_device *dp;
-	int ret;
-
-	dp = container_of(work, struct exynos_dp_device, hotplug_work);
-
-	ret = exynos_dp_detect_hpd(dp);
-	if (ret) {
-		/* Cable has been disconnected, we're done */
-		return;
-	}
-
-	ret = exynos_dp_handle_edid(dp);
-	if (ret) {
-		dev_err(dp->dev, "unable to handle edid\n");
-		return;
-	}
-
-	ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
-					dp->video_info->link_rate);
-	if (ret) {
-		dev_err(dp->dev, "unable to do link train\n");
-		return;
-	}
-
-	exynos_dp_enable_scramble(dp, 1);
-	exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
-	exynos_dp_enable_enhanced_mode(dp, 1);
-
-	exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
-	exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
-	exynos_dp_init_video(dp);
-	ret = exynos_dp_config_video(dp);
-	if (ret)
-		dev_err(dp->dev, "unable to config video\n");
-}
-
-static struct video_info *exynos_dp_dt_parse_pdata(struct device *dev)
-{
-	struct device_node *dp_node = dev->of_node;
-	struct video_info *dp_video_config;
-
-	dp_video_config = devm_kzalloc(dev,
-				sizeof(*dp_video_config), GFP_KERNEL);
-	if (!dp_video_config) {
-		dev_err(dev, "memory allocation for video config failed\n");
-		return ERR_PTR(-ENOMEM);
-	}
-
-	dp_video_config->h_sync_polarity =
-		of_property_read_bool(dp_node, "hsync-active-high");
-
-	dp_video_config->v_sync_polarity =
-		of_property_read_bool(dp_node, "vsync-active-high");
-
-	dp_video_config->interlaced =
-		of_property_read_bool(dp_node, "interlaced");
-
-	if (of_property_read_u32(dp_node, "samsung,color-space",
-				&dp_video_config->color_space)) {
-		dev_err(dev, "failed to get color-space\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	if (of_property_read_u32(dp_node, "samsung,dynamic-range",
-				&dp_video_config->dynamic_range)) {
-		dev_err(dev, "failed to get dynamic-range\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	if (of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
-				&dp_video_config->ycbcr_coeff)) {
-		dev_err(dev, "failed to get ycbcr-coeff\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	if (of_property_read_u32(dp_node, "samsung,color-depth",
-				&dp_video_config->color_depth)) {
-		dev_err(dev, "failed to get color-depth\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	if (of_property_read_u32(dp_node, "samsung,link-rate",
-				&dp_video_config->link_rate)) {
-		dev_err(dev, "failed to get link-rate\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	if (of_property_read_u32(dp_node, "samsung,lane-count",
-				&dp_video_config->lane_count)) {
-		dev_err(dev, "failed to get lane-count\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	return dp_video_config;
-}
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
-	u32 phy_base;
-	int ret = 0;
-
-	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
-	if (!dp_phy_node) {
-		dp->phy = devm_phy_get(dp->dev, "dp");
-		if (IS_ERR(dp->phy))
-			return PTR_ERR(dp->phy);
-		else
-			return 0;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
-		dev_err(dp->dev, "failed to get reg for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
-				&dp->enable_mask)) {
-		dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	dp->phy_addr = ioremap(phy_base, SZ_4);
-	if (!dp->phy_addr) {
-		dev_err(dp->dev, "failed to ioremap dp-phy\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-err:
-	of_node_put(dp_phy_node);
-
-	return ret;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	if (dp->phy) {
-		phy_power_on(dp->phy);
-	} else if (dp->phy_addr) {
-		u32 reg;
-
-		reg = __raw_readl(dp->phy_addr);
-		reg |= dp->enable_mask;
-		__raw_writel(reg, dp->phy_addr);
-	}
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	if (dp->phy) {
-		phy_power_off(dp->phy);
-	} else if (dp->phy_addr) {
-		u32 reg;
-
-		reg = __raw_readl(dp->phy_addr);
-		reg &= ~(dp->enable_mask);
-		__raw_writel(reg, dp->phy_addr);
-	}
-}
-
-static int exynos_dp_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct exynos_dp_device *dp;
-
-	int ret = 0;
-
-	dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
-				GFP_KERNEL);
-	if (!dp) {
-		dev_err(&pdev->dev, "no memory for device data\n");
-		return -ENOMEM;
-	}
-
-	dp->dev = &pdev->dev;
-
-	dp->video_info = exynos_dp_dt_parse_pdata(&pdev->dev);
-	if (IS_ERR(dp->video_info))
-		return PTR_ERR(dp->video_info);
-
-	ret = exynos_dp_dt_parse_phydata(dp);
-	if (ret)
-		return ret;
-
-	dp->clock = devm_clk_get(&pdev->dev, "dp");
-	if (IS_ERR(dp->clock)) {
-		dev_err(&pdev->dev, "failed to get clock\n");
-		return PTR_ERR(dp->clock);
-	}
-
-	clk_prepare_enable(dp->clock);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	dp->reg_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(dp->reg_base))
-		return PTR_ERR(dp->reg_base);
-
-	dp->irq = platform_get_irq(pdev, 0);
-	if (dp->irq == -ENXIO) {
-		dev_err(&pdev->dev, "failed to get irq\n");
-		return -ENODEV;
-	}
-
-	INIT_WORK(&dp->hotplug_work, exynos_dp_hotplug);
-
-	exynos_dp_phy_init(dp);
-
-	exynos_dp_init_dp(dp);
-
-	ret = devm_request_irq(&pdev->dev, dp->irq, exynos_dp_irq_handler, 0,
-				"exynos-dp", dp);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to request irq\n");
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, dp);
-
-	return 0;
-}
-
-static int exynos_dp_remove(struct platform_device *pdev)
-{
-	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
-
-	flush_work(&dp->hotplug_work);
-
-	exynos_dp_phy_exit(dp);
-
-	clk_disable_unprepare(dp->clock);
-
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos_dp_suspend(struct device *dev)
-{
-	struct exynos_dp_device *dp = dev_get_drvdata(dev);
-
-	disable_irq(dp->irq);
-
-	flush_work(&dp->hotplug_work);
-
-	exynos_dp_phy_exit(dp);
-
-	clk_disable_unprepare(dp->clock);
-
-	return 0;
-}
-
-static int exynos_dp_resume(struct device *dev)
-{
-	struct exynos_dp_device *dp = dev_get_drvdata(dev);
-
-	exynos_dp_phy_init(dp);
-
-	clk_prepare_enable(dp->clock);
-
-	exynos_dp_init_dp(dp);
-
-	enable_irq(dp->irq);
-
-	return 0;
-}
-#endif
-
-static const struct dev_pm_ops exynos_dp_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(exynos_dp_suspend, exynos_dp_resume)
-};
-
-static const struct of_device_id exynos_dp_match[] = {
-	{ .compatible = "samsung,exynos5-dp" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, exynos_dp_match);
-
-static struct platform_driver exynos_dp_driver = {
-	.probe		= exynos_dp_probe,
-	.remove		= exynos_dp_remove,
-	.driver		= {
-		.name	= "exynos-dp",
-		.owner	= THIS_MODULE,
-		.pm	= &exynos_dp_pm_ops,
-		.of_match_table = exynos_dp_match,
-	},
-};
-
-module_platform_driver(exynos_dp_driver);
-
-MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
-MODULE_DESCRIPTION("Samsung SoC DP Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
deleted file mode 100644
index 607e36d0c147..000000000000
--- a/drivers/video/exynos/exynos_dp_core.h
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * Header file for Samsung DP (Display Port) interface driver.
- *
- * Copyright (C) 2012 Samsung Electronics Co., Ltd.
- * Author: Jingoo Han <jg1.han@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef _EXYNOS_DP_CORE_H
-#define _EXYNOS_DP_CORE_H
-
-#define DP_TIMEOUT_LOOP_COUNT 100
-#define MAX_CR_LOOP 5
-#define MAX_EQ_LOOP 5
-
-enum link_rate_type {
-	LINK_RATE_1_62GBPS = 0x06,
-	LINK_RATE_2_70GBPS = 0x0a
-};
-
-enum link_lane_count_type {
-	LANE_COUNT1 = 1,
-	LANE_COUNT2 = 2,
-	LANE_COUNT4 = 4
-};
-
-enum link_training_state {
-	START,
-	CLOCK_RECOVERY,
-	EQUALIZER_TRAINING,
-	FINISHED,
-	FAILED
-};
-
-enum voltage_swing_level {
-	VOLTAGE_LEVEL_0,
-	VOLTAGE_LEVEL_1,
-	VOLTAGE_LEVEL_2,
-	VOLTAGE_LEVEL_3,
-};
-
-enum pre_emphasis_level {
-	PRE_EMPHASIS_LEVEL_0,
-	PRE_EMPHASIS_LEVEL_1,
-	PRE_EMPHASIS_LEVEL_2,
-	PRE_EMPHASIS_LEVEL_3,
-};
-
-enum pattern_set {
-	PRBS7,
-	D10_2,
-	TRAINING_PTN1,
-	TRAINING_PTN2,
-	DP_NONE
-};
-
-enum color_space {
-	COLOR_RGB,
-	COLOR_YCBCR422,
-	COLOR_YCBCR444
-};
-
-enum color_depth {
-	COLOR_6,
-	COLOR_8,
-	COLOR_10,
-	COLOR_12
-};
-
-enum color_coefficient {
-	COLOR_YCBCR601,
-	COLOR_YCBCR709
-};
-
-enum dynamic_range {
-	VESA,
-	CEA
-};
-
-enum pll_status {
-	PLL_UNLOCKED,
-	PLL_LOCKED
-};
-
-enum clock_recovery_m_value_type {
-	CALCULATED_M,
-	REGISTER_M
-};
-
-enum video_timing_recognition_type {
-	VIDEO_TIMING_FROM_CAPTURE,
-	VIDEO_TIMING_FROM_REGISTER
-};
-
-enum analog_power_block {
-	AUX_BLOCK,
-	CH0_BLOCK,
-	CH1_BLOCK,
-	CH2_BLOCK,
-	CH3_BLOCK,
-	ANALOG_TOTAL,
-	POWER_ALL
-};
-
-enum dp_irq_type {
-	DP_IRQ_TYPE_HP_CABLE_IN,
-	DP_IRQ_TYPE_HP_CABLE_OUT,
-	DP_IRQ_TYPE_HP_CHANGE,
-	DP_IRQ_TYPE_UNKNOWN,
-};
-
-struct video_info {
-	char *name;
-
-	bool h_sync_polarity;
-	bool v_sync_polarity;
-	bool interlaced;
-
-	enum color_space color_space;
-	enum dynamic_range dynamic_range;
-	enum color_coefficient ycbcr_coeff;
-	enum color_depth color_depth;
-
-	enum link_rate_type link_rate;
-	enum link_lane_count_type lane_count;
-};
-
-struct link_train {
-	int eq_loop;
-	int cr_loop[4];
-
-	u8 link_rate;
-	u8 lane_count;
-	u8 training_lane[4];
-
-	enum link_training_state lt_state;
-};
-
-struct exynos_dp_device {
-	struct device		*dev;
-	struct clk		*clock;
-	unsigned int		irq;
-	void __iomem		*reg_base;
-	void __iomem		*phy_addr;
-	unsigned int		enable_mask;
-
-	struct video_info	*video_info;
-	struct link_train	link_train;
-	struct work_struct	hotplug_work;
-	struct phy		*phy;
-};
-
-/* exynos_dp_reg.c */
-void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool enable);
-void exynos_dp_stop_video(struct exynos_dp_device *dp);
-void exynos_dp_lane_swap(struct exynos_dp_device *dp, bool enable);
-void exynos_dp_init_analog_param(struct exynos_dp_device *dp);
-void exynos_dp_init_interrupt(struct exynos_dp_device *dp);
-void exynos_dp_reset(struct exynos_dp_device *dp);
-void exynos_dp_swreset(struct exynos_dp_device *dp);
-void exynos_dp_config_interrupt(struct exynos_dp_device *dp);
-enum pll_status exynos_dp_get_pll_lock_status(struct exynos_dp_device *dp);
-void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool enable);
-void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
-				enum analog_power_block block,
-				bool enable);
-void exynos_dp_init_analog_func(struct exynos_dp_device *dp);
-void exynos_dp_init_hpd(struct exynos_dp_device *dp);
-enum dp_irq_type exynos_dp_get_irq_type(struct exynos_dp_device *dp);
-void exynos_dp_clear_hotplug_interrupts(struct exynos_dp_device *dp);
-void exynos_dp_reset_aux(struct exynos_dp_device *dp);
-void exynos_dp_init_aux(struct exynos_dp_device *dp);
-int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp);
-void exynos_dp_enable_sw_function(struct exynos_dp_device *dp);
-int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp);
-int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
-				unsigned int reg_addr,
-				unsigned char data);
-int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
-				unsigned int reg_addr,
-				unsigned char *data);
-int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
-				unsigned int reg_addr,
-				unsigned int count,
-				unsigned char data[]);
-int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
-				unsigned int reg_addr,
-				unsigned int count,
-				unsigned char data[]);
-int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
-				unsigned int device_addr,
-				unsigned int reg_addr);
-int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
-				unsigned int device_addr,
-				unsigned int reg_addr,
-				unsigned int *data);
-int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
-				unsigned int device_addr,
-				unsigned int reg_addr,
-				unsigned int count,
-				unsigned char edid[]);
-void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32 bwtype);
-void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32 *bwtype);
-void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count);
-void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count);
-void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool enable);
-void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
-				 enum pattern_set pattern);
-void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32 level);
-void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32 level);
-void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32 level);
-void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32 level);
-void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
-				u32 training_lane);
-void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
-				u32 training_lane);
-void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
-				u32 training_lane);
-void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
-				u32 training_lane);
-u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp);
-u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp);
-u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp);
-u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp);
-void exynos_dp_reset_macro(struct exynos_dp_device *dp);
-void exynos_dp_init_video(struct exynos_dp_device *dp);
-
-void exynos_dp_set_video_color_format(struct exynos_dp_device *dp);
-int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp);
-void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
-			enum clock_recovery_m_value_type type,
-			u32 m_value,
-			u32 n_value);
-void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32 type);
-void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool enable);
-void exynos_dp_start_video(struct exynos_dp_device *dp);
-int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp);
-void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp);
-void exynos_dp_enable_scrambling(struct exynos_dp_device *dp);
-void exynos_dp_disable_scrambling(struct exynos_dp_device *dp);
-
-/* I2C EDID Chip ID, Slave Address */
-#define I2C_EDID_DEVICE_ADDR			0x50
-#define I2C_E_EDID_DEVICE_ADDR			0x30
-
-#define EDID_BLOCK_LENGTH			0x80
-#define EDID_HEADER_PATTERN			0x00
-#define EDID_EXTENSION_FLAG			0x7e
-#define EDID_CHECKSUM				0x7f
-
-/* Definition for DPCD Register */
-#define DPCD_ADDR_DPCD_REV			0x0000
-#define DPCD_ADDR_MAX_LINK_RATE			0x0001
-#define DPCD_ADDR_MAX_LANE_COUNT		0x0002
-#define DPCD_ADDR_LINK_BW_SET			0x0100
-#define DPCD_ADDR_LANE_COUNT_SET		0x0101
-#define DPCD_ADDR_TRAINING_PATTERN_SET		0x0102
-#define DPCD_ADDR_TRAINING_LANE0_SET		0x0103
-#define DPCD_ADDR_LANE0_1_STATUS		0x0202
-#define DPCD_ADDR_LANE_ALIGN_STATUS_UPDATED	0x0204
-#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1	0x0206
-#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3	0x0207
-#define DPCD_ADDR_TEST_REQUEST			0x0218
-#define DPCD_ADDR_TEST_RESPONSE			0x0260
-#define DPCD_ADDR_TEST_EDID_CHECKSUM		0x0261
-#define DPCD_ADDR_SINK_POWER_STATE		0x0600
-
-/* DPCD_ADDR_MAX_LANE_COUNT */
-#define DPCD_ENHANCED_FRAME_CAP(x)		(((x) >> 7) & 0x1)
-#define DPCD_MAX_LANE_COUNT(x)			((x) & 0x1f)
-
-/* DPCD_ADDR_LANE_COUNT_SET */
-#define DPCD_ENHANCED_FRAME_EN			(0x1 << 7)
-#define DPCD_LANE_COUNT_SET(x)			((x) & 0x1f)
-
-/* DPCD_ADDR_TRAINING_PATTERN_SET */
-#define DPCD_SCRAMBLING_DISABLED		(0x1 << 5)
-#define DPCD_SCRAMBLING_ENABLED			(0x0 << 5)
-#define DPCD_TRAINING_PATTERN_2			(0x2 << 0)
-#define DPCD_TRAINING_PATTERN_1			(0x1 << 0)
-#define DPCD_TRAINING_PATTERN_DISABLED		(0x0 << 0)
-
-/* DPCD_ADDR_TRAINING_LANE0_SET */
-#define DPCD_MAX_PRE_EMPHASIS_REACHED		(0x1 << 5)
-#define DPCD_PRE_EMPHASIS_SET(x)		(((x) & 0x3) << 3)
-#define DPCD_PRE_EMPHASIS_GET(x)		(((x) >> 3) & 0x3)
-#define DPCD_PRE_EMPHASIS_PATTERN2_LEVEL0	(0x0 << 3)
-#define DPCD_MAX_SWING_REACHED			(0x1 << 2)
-#define DPCD_VOLTAGE_SWING_SET(x)		(((x) & 0x3) << 0)
-#define DPCD_VOLTAGE_SWING_GET(x)		(((x) >> 0) & 0x3)
-#define DPCD_VOLTAGE_SWING_PATTERN1_LEVEL0	(0x0 << 0)
-
-/* DPCD_ADDR_LANE0_1_STATUS */
-#define DPCD_LANE_SYMBOL_LOCKED			(0x1 << 2)
-#define DPCD_LANE_CHANNEL_EQ_DONE		(0x1 << 1)
-#define DPCD_LANE_CR_DONE			(0x1 << 0)
-#define DPCD_CHANNEL_EQ_BITS			(DPCD_LANE_CR_DONE|	\
-						 DPCD_LANE_CHANNEL_EQ_DONE|\
-						 DPCD_LANE_SYMBOL_LOCKED)
-
-/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */
-#define DPCD_LINK_STATUS_UPDATED		(0x1 << 7)
-#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED	(0x1 << 6)
-#define DPCD_INTERLANE_ALIGN_DONE		(0x1 << 0)
-
-/* DPCD_ADDR_TEST_REQUEST */
-#define DPCD_TEST_EDID_READ			(0x1 << 2)
-
-/* DPCD_ADDR_TEST_RESPONSE */
-#define DPCD_TEST_EDID_CHECKSUM_WRITE		(0x1 << 2)
-
-/* DPCD_ADDR_SINK_POWER_STATE */
-#define DPCD_SET_POWER_STATE_D0			(0x1 << 0)
-#define DPCD_SET_POWER_STATE_D4			(0x2 << 0)
-
-#endif /* _EXYNOS_DP_CORE_H */
diff --git a/drivers/video/exynos/exynos_dp_reg.c b/drivers/video/exynos/exynos_dp_reg.c
deleted file mode 100644
index b70da5052ff0..000000000000
--- a/drivers/video/exynos/exynos_dp_reg.c
+++ /dev/null
@@ -1,1243 +0,0 @@
-/*
- * Samsung DP (Display port) register interface driver.
- *
- * Copyright (C) 2012 Samsung Electronics Co., Ltd.
- * Author: Jingoo Han <jg1.han@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include "exynos_dp_core.h"
-#include "exynos_dp_reg.h"
-
-#define COMMON_INT_MASK_1	0
-#define COMMON_INT_MASK_2	0
-#define COMMON_INT_MASK_3	0
-#define COMMON_INT_MASK_4	(HOTPLUG_CHG | HPD_LOST | PLUG)
-#define INT_STA_MASK		INT_HPD
-
-void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool enable)
-{
-	u32 reg;
-
-	if (enable) {
-		reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
-		reg |= HDCP_VIDEO_MUTE;
-		writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
-	} else {
-		reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
-		reg &= ~HDCP_VIDEO_MUTE;
-		writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
-	}
-}
-
-void exynos_dp_stop_video(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
-	reg &= ~VIDEO_EN;
-	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
-}
-
-void exynos_dp_lane_swap(struct exynos_dp_device *dp, bool enable)
-{
-	u32 reg;
-
-	if (enable)
-		reg = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 |
-			LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3;
-	else
-		reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
-			LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
-
-	writel(reg, dp->reg_base + EXYNOS_DP_LANE_MAP);
-}
-
-void exynos_dp_init_analog_param(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = TX_TERMINAL_CTRL_50_OHM;
-	writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_1);
-
-	reg = SEL_24M | TX_DVDD_BIT_1_0625V;
-	writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_2);
-
-	reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
-	writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_3);
-
-	reg = PD_RING_OSC | AUX_TERMINAL_CTRL_50_OHM |
-		TX_CUR1_2X | TX_CUR_16_MA;
-	writel(reg, dp->reg_base + EXYNOS_DP_PLL_FILTER_CTL_1);
-
-	reg = CH3_AMP_400_MV | CH2_AMP_400_MV |
-		CH1_AMP_400_MV | CH0_AMP_400_MV;
-	writel(reg, dp->reg_base + EXYNOS_DP_TX_AMP_TUNING_CTL);
-}
-
-void exynos_dp_init_interrupt(struct exynos_dp_device *dp)
-{
-	/* Set interrupt pin assertion polarity as high */
-	writel(INT_POL1 | INT_POL0, dp->reg_base + EXYNOS_DP_INT_CTL);
-
-	/* Clear pending regisers */
-	writel(0xff, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
-	writel(0x4f, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_2);
-	writel(0xe0, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_3);
-	writel(0xe7, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
-	writel(0x63, dp->reg_base + EXYNOS_DP_INT_STA);
-
-	/* 0:mask,1: unmask */
-	writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_1);
-	writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_2);
-	writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_3);
-	writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_4);
-	writel(0x00, dp->reg_base + EXYNOS_DP_INT_STA_MASK);
-}
-
-void exynos_dp_reset(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	exynos_dp_stop_video(dp);
-	exynos_dp_enable_video_mute(dp, 0);
-
-	reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
-		AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
-		HDCP_FUNC_EN_N | SW_FUNC_EN_N;
-	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
-
-	reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N |
-		SERDES_FIFO_FUNC_EN_N |
-		LS_CLK_DOMAIN_FUNC_EN_N;
-	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
-
-	usleep_range(20, 30);
-
-	exynos_dp_lane_swap(dp, 0);
-
-	writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
-	writel(0x40, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
-	writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
-	writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
-
-	writel(0x0, dp->reg_base + EXYNOS_DP_PKT_SEND_CTL);
-	writel(0x0, dp->reg_base + EXYNOS_DP_HDCP_CTL);
-
-	writel(0x5e, dp->reg_base + EXYNOS_DP_HPD_DEGLITCH_L);
-	writel(0x1a, dp->reg_base + EXYNOS_DP_HPD_DEGLITCH_H);
-
-	writel(0x10, dp->reg_base + EXYNOS_DP_LINK_DEBUG_CTL);
-
-	writel(0x0, dp->reg_base + EXYNOS_DP_PHY_TEST);
-
-	writel(0x0, dp->reg_base + EXYNOS_DP_VIDEO_FIFO_THRD);
-	writel(0x20, dp->reg_base + EXYNOS_DP_AUDIO_MARGIN);
-
-	writel(0x4, dp->reg_base + EXYNOS_DP_M_VID_GEN_FILTER_TH);
-	writel(0x2, dp->reg_base + EXYNOS_DP_M_AUD_GEN_FILTER_TH);
-
-	writel(0x00000101, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
-}
-
-void exynos_dp_swreset(struct exynos_dp_device *dp)
-{
-	writel(RESET_DP_TX, dp->reg_base + EXYNOS_DP_TX_SW_RESET);
-}
-
-void exynos_dp_config_interrupt(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	/* 0: mask, 1: unmask */
-	reg = COMMON_INT_MASK_1;
-	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_1);
-
-	reg = COMMON_INT_MASK_2;
-	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_2);
-
-	reg = COMMON_INT_MASK_3;
-	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_3);
-
-	reg = COMMON_INT_MASK_4;
-	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_4);
-
-	reg = INT_STA_MASK;
-	writel(reg, dp->reg_base + EXYNOS_DP_INT_STA_MASK);
-}
-
-enum pll_status exynos_dp_get_pll_lock_status(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_DEBUG_CTL);
-	if (reg & PLL_LOCK)
-		return PLL_LOCKED;
-	else
-		return PLL_UNLOCKED;
-}
-
-void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool enable)
-{
-	u32 reg;
-
-	if (enable) {
-		reg = readl(dp->reg_base + EXYNOS_DP_PLL_CTL);
-		reg |= DP_PLL_PD;
-		writel(reg, dp->reg_base + EXYNOS_DP_PLL_CTL);
-	} else {
-		reg = readl(dp->reg_base + EXYNOS_DP_PLL_CTL);
-		reg &= ~DP_PLL_PD;
-		writel(reg, dp->reg_base + EXYNOS_DP_PLL_CTL);
-	}
-}
-
-void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
-				enum analog_power_block block,
-				bool enable)
-{
-	u32 reg;
-
-	switch (block) {
-	case AUX_BLOCK:
-		if (enable) {
-			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
-			reg |= AUX_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		} else {
-			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
-			reg &= ~AUX_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		}
-		break;
-	case CH0_BLOCK:
-		if (enable) {
-			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
-			reg |= CH0_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		} else {
-			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
-			reg &= ~CH0_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		}
-		break;
-	case CH1_BLOCK:
-		if (enable) {
-			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
-			reg |= CH1_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		} else {
-			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
-			reg &= ~CH1_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		}
-		break;
-	case CH2_BLOCK:
-		if (enable) {
-			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
-			reg |= CH2_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		} else {
-			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
-			reg &= ~CH2_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		}
-		break;
-	case CH3_BLOCK:
-		if (enable) {
-			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
-			reg |= CH3_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		} else {
-			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
-			reg &= ~CH3_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		}
-		break;
-	case ANALOG_TOTAL:
-		if (enable) {
-			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
-			reg |= DP_PHY_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		} else {
-			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
-			reg &= ~DP_PHY_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		}
-		break;
-	case POWER_ALL:
-		if (enable) {
-			reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
-				CH1_PD | CH0_PD;
-			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
-		} else {
-			writel(0x00, dp->reg_base + EXYNOS_DP_PHY_PD);
-		}
-		break;
-	default:
-		break;
-	}
-}
-
-void exynos_dp_init_analog_func(struct exynos_dp_device *dp)
-{
-	u32 reg;
-	int timeout_loop = 0;
-
-	exynos_dp_set_analog_power_down(dp, POWER_ALL, 0);
-
-	reg = PLL_LOCK_CHG;
-	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
-
-	reg = readl(dp->reg_base + EXYNOS_DP_DEBUG_CTL);
-	reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL);
-	writel(reg, dp->reg_base + EXYNOS_DP_DEBUG_CTL);
-
-	/* Power up PLL */
-	if (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
-		exynos_dp_set_pll_power_down(dp, 0);
-
-		while (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
-			timeout_loop++;
-			if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
-				dev_err(dp->dev, "failed to get pll lock status\n");
-				return;
-			}
-			usleep_range(10, 20);
-		}
-	}
-
-	/* Enable Serdes FIFO function and Link symbol clock domain module */
-	reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
-	reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N
-		| AUX_FUNC_EN_N);
-	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
-}
-
-void exynos_dp_clear_hotplug_interrupts(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = HOTPLUG_CHG | HPD_LOST | PLUG;
-	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
-
-	reg = INT_HPD;
-	writel(reg, dp->reg_base + EXYNOS_DP_INT_STA);
-}
-
-void exynos_dp_init_hpd(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	exynos_dp_clear_hotplug_interrupts(dp);
-
-	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
-	reg &= ~(F_HPD | HPD_CTRL);
-	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
-}
-
-enum dp_irq_type exynos_dp_get_irq_type(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	/* Parse hotplug interrupt status register */
-	reg = readl(dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
-
-	if (reg & PLUG)
-		return DP_IRQ_TYPE_HP_CABLE_IN;
-
-	if (reg & HPD_LOST)
-		return DP_IRQ_TYPE_HP_CABLE_OUT;
-
-	if (reg & HOTPLUG_CHG)
-		return DP_IRQ_TYPE_HP_CHANGE;
-
-	return DP_IRQ_TYPE_UNKNOWN;
-}
-
-void exynos_dp_reset_aux(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	/* Disable AUX channel module */
-	reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
-	reg |= AUX_FUNC_EN_N;
-	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
-}
-
-void exynos_dp_init_aux(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	/* Clear inerrupts related to AUX channel */
-	reg = RPLY_RECEIV | AUX_ERR;
-	writel(reg, dp->reg_base + EXYNOS_DP_INT_STA);
-
-	exynos_dp_reset_aux(dp);
-
-	/* Disable AUX transaction H/W retry */
-	reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0)|
-		AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
-	writel(reg, dp->reg_base + EXYNOS_DP_AUX_HW_RETRY_CTL) ;
-
-	/* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
-	reg = DEFER_CTRL_EN | DEFER_COUNT(1);
-	writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_DEFER_CTL);
-
-	/* Enable AUX channel module */
-	reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
-	reg &= ~AUX_FUNC_EN_N;
-	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
-}
-
-int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
-	if (reg & HPD_STATUS)
-		return 0;
-
-	return -EINVAL;
-}
-
-void exynos_dp_enable_sw_function(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1);
-	reg &= ~SW_FUNC_EN_N;
-	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
-}
-
-int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp)
-{
-	int reg;
-	int retval = 0;
-	int timeout_loop = 0;
-
-	/* Enable AUX CH operation */
-	reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
-	reg |= AUX_EN;
-	writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
-
-	/* Is AUX CH command reply received? */
-	reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
-	while (!(reg & RPLY_RECEIV)) {
-		timeout_loop++;
-		if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
-			dev_err(dp->dev, "AUX CH command reply failed!\n");
-			return -ETIMEDOUT;
-		}
-		reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
-		usleep_range(10, 11);
-	}
-
-	/* Clear interrupt source for AUX CH command reply */
-	writel(RPLY_RECEIV, dp->reg_base + EXYNOS_DP_INT_STA);
-
-	/* Clear interrupt source for AUX CH access error */
-	reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
-	if (reg & AUX_ERR) {
-		writel(AUX_ERR, dp->reg_base + EXYNOS_DP_INT_STA);
-		return -EREMOTEIO;
-	}
-
-	/* Check AUX CH error access status */
-	reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_STA);
-	if ((reg & AUX_STATUS_MASK) != 0) {
-		dev_err(dp->dev, "AUX CH error happens: %d\n\n",
-			reg & AUX_STATUS_MASK);
-		return -EREMOTEIO;
-	}
-
-	return retval;
-}
-
-int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
-				unsigned int reg_addr,
-				unsigned char data)
-{
-	u32 reg;
-	int i;
-	int retval;
-
-	for (i = 0; i < 3; i++) {
-		/* Clear AUX CH data buffer */
-		reg = BUF_CLR;
-		writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
-
-		/* Select DPCD device address */
-		reg = AUX_ADDR_7_0(reg_addr);
-		writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
-		reg = AUX_ADDR_15_8(reg_addr);
-		writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
-		reg = AUX_ADDR_19_16(reg_addr);
-		writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
-
-		/* Write data buffer */
-		reg = (unsigned int)data;
-		writel(reg, dp->reg_base + EXYNOS_DP_BUF_DATA_0);
-
-		/*
-		 * Set DisplayPort transaction and write 1 byte
-		 * If bit 3 is 1, DisplayPort transaction.
-		 * If Bit 3 is 0, I2C transaction.
-		 */
-		reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
-		writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
-
-		/* Start AUX transaction */
-		retval = exynos_dp_start_aux_transaction(dp);
-		if (retval == 0)
-			break;
-		else
-			dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
-				__func__);
-	}
-
-	return retval;
-}
-
-int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
-				unsigned int reg_addr,
-				unsigned char *data)
-{
-	u32 reg;
-	int i;
-	int retval;
-
-	for (i = 0; i < 3; i++) {
-		/* Clear AUX CH data buffer */
-		reg = BUF_CLR;
-		writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
-
-		/* Select DPCD device address */
-		reg = AUX_ADDR_7_0(reg_addr);
-		writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
-		reg = AUX_ADDR_15_8(reg_addr);
-		writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
-		reg = AUX_ADDR_19_16(reg_addr);
-		writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
-
-		/*
-		 * Set DisplayPort transaction and read 1 byte
-		 * If bit 3 is 1, DisplayPort transaction.
-		 * If Bit 3 is 0, I2C transaction.
-		 */
-		reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
-		writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
-
-		/* Start AUX transaction */
-		retval = exynos_dp_start_aux_transaction(dp);
-		if (retval == 0)
-			break;
-		else
-			dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
-				__func__);
-	}
-
-	/* Read data buffer */
-	reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0);
-	*data = (unsigned char)(reg & 0xff);
-
-	return retval;
-}
-
-int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
-				unsigned int reg_addr,
-				unsigned int count,
-				unsigned char data[])
-{
-	u32 reg;
-	unsigned int start_offset;
-	unsigned int cur_data_count;
-	unsigned int cur_data_idx;
-	int i;
-	int retval = 0;
-
-	/* Clear AUX CH data buffer */
-	reg = BUF_CLR;
-	writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
-
-	start_offset = 0;
-	while (start_offset < count) {
-		/* Buffer size of AUX CH is 16 * 4bytes */
-		if ((count - start_offset) > 16)
-			cur_data_count = 16;
-		else
-			cur_data_count = count - start_offset;
-
-		for (i = 0; i < 3; i++) {
-			/* Select DPCD device address */
-			reg = AUX_ADDR_7_0(reg_addr + start_offset);
-			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
-			reg = AUX_ADDR_15_8(reg_addr + start_offset);
-			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
-			reg = AUX_ADDR_19_16(reg_addr + start_offset);
-			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
-
-			for (cur_data_idx = 0; cur_data_idx < cur_data_count;
-			     cur_data_idx++) {
-				reg = data[start_offset + cur_data_idx];
-				writel(reg, dp->reg_base + EXYNOS_DP_BUF_DATA_0
-							  + 4 * cur_data_idx);
-			}
-
-			/*
-			 * Set DisplayPort transaction and write
-			 * If bit 3 is 1, DisplayPort transaction.
-			 * If Bit 3 is 0, I2C transaction.
-			 */
-			reg = AUX_LENGTH(cur_data_count) |
-				AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
-			writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
-
-			/* Start AUX transaction */
-			retval = exynos_dp_start_aux_transaction(dp);
-			if (retval == 0)
-				break;
-			else
-				dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
-					__func__);
-		}
-
-		start_offset += cur_data_count;
-	}
-
-	return retval;
-}
-
-int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
-				unsigned int reg_addr,
-				unsigned int count,
-				unsigned char data[])
-{
-	u32 reg;
-	unsigned int start_offset;
-	unsigned int cur_data_count;
-	unsigned int cur_data_idx;
-	int i;
-	int retval = 0;
-
-	/* Clear AUX CH data buffer */
-	reg = BUF_CLR;
-	writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
-
-	start_offset = 0;
-	while (start_offset < count) {
-		/* Buffer size of AUX CH is 16 * 4bytes */
-		if ((count - start_offset) > 16)
-			cur_data_count = 16;
-		else
-			cur_data_count = count - start_offset;
-
-		/* AUX CH Request Transaction process */
-		for (i = 0; i < 3; i++) {
-			/* Select DPCD device address */
-			reg = AUX_ADDR_7_0(reg_addr + start_offset);
-			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
-			reg = AUX_ADDR_15_8(reg_addr + start_offset);
-			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
-			reg = AUX_ADDR_19_16(reg_addr + start_offset);
-			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
-
-			/*
-			 * Set DisplayPort transaction and read
-			 * If bit 3 is 1, DisplayPort transaction.
-			 * If Bit 3 is 0, I2C transaction.
-			 */
-			reg = AUX_LENGTH(cur_data_count) |
-				AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
-			writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
-
-			/* Start AUX transaction */
-			retval = exynos_dp_start_aux_transaction(dp);
-			if (retval == 0)
-				break;
-			else
-				dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
-					__func__);
-		}
-
-		for (cur_data_idx = 0; cur_data_idx < cur_data_count;
-		    cur_data_idx++) {
-			reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0
-						 + 4 * cur_data_idx);
-			data[start_offset + cur_data_idx] =
-				(unsigned char)reg;
-		}
-
-		start_offset += cur_data_count;
-	}
-
-	return retval;
-}
-
-int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
-				unsigned int device_addr,
-				unsigned int reg_addr)
-{
-	u32 reg;
-	int retval;
-
-	/* Set EDID device address */
-	reg = device_addr;
-	writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
-	writel(0x0, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
-	writel(0x0, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
-
-	/* Set offset from base address of EDID device */
-	writel(reg_addr, dp->reg_base + EXYNOS_DP_BUF_DATA_0);
-
-	/*
-	 * Set I2C transaction and write address
-	 * If bit 3 is 1, DisplayPort transaction.
-	 * If Bit 3 is 0, I2C transaction.
-	 */
-	reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
-		AUX_TX_COMM_WRITE;
-	writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
-
-	/* Start AUX transaction */
-	retval = exynos_dp_start_aux_transaction(dp);
-	if (retval != 0)
-		dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
-
-	return retval;
-}
-
-int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
-				unsigned int device_addr,
-				unsigned int reg_addr,
-				unsigned int *data)
-{
-	u32 reg;
-	int i;
-	int retval;
-
-	for (i = 0; i < 3; i++) {
-		/* Clear AUX CH data buffer */
-		reg = BUF_CLR;
-		writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
-
-		/* Select EDID device */
-		retval = exynos_dp_select_i2c_device(dp, device_addr, reg_addr);
-		if (retval != 0)
-			continue;
-
-		/*
-		 * Set I2C transaction and read data
-		 * If bit 3 is 1, DisplayPort transaction.
-		 * If Bit 3 is 0, I2C transaction.
-		 */
-		reg = AUX_TX_COMM_I2C_TRANSACTION |
-			AUX_TX_COMM_READ;
-		writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
-
-		/* Start AUX transaction */
-		retval = exynos_dp_start_aux_transaction(dp);
-		if (retval == 0)
-			break;
-		else
-			dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
-				__func__);
-	}
-
-	/* Read data */
-	if (retval == 0)
-		*data = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0);
-
-	return retval;
-}
-
-int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
-				unsigned int device_addr,
-				unsigned int reg_addr,
-				unsigned int count,
-				unsigned char edid[])
-{
-	u32 reg;
-	unsigned int i, j;
-	unsigned int cur_data_idx;
-	unsigned int defer = 0;
-	int retval = 0;
-
-	for (i = 0; i < count; i += 16) {
-		for (j = 0; j < 3; j++) {
-			/* Clear AUX CH data buffer */
-			reg = BUF_CLR;
-			writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
-
-			/* Set normal AUX CH command */
-			reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
-			reg &= ~ADDR_ONLY;
-			writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
-
-			/*
-			 * If Rx sends defer, Tx sends only reads
-			 * request without sending address
-			 */
-			if (!defer)
-				retval = exynos_dp_select_i2c_device(dp,
-						device_addr, reg_addr + i);
-			else
-				defer = 0;
-
-			if (retval == 0) {
-				/*
-				 * Set I2C transaction and write data
-				 * If bit 3 is 1, DisplayPort transaction.
-				 * If Bit 3 is 0, I2C transaction.
-				 */
-				reg = AUX_LENGTH(16) |
-					AUX_TX_COMM_I2C_TRANSACTION |
-					AUX_TX_COMM_READ;
-				writel(reg, dp->reg_base +
-					EXYNOS_DP_AUX_CH_CTL_1);
-
-				/* Start AUX transaction */
-				retval = exynos_dp_start_aux_transaction(dp);
-				if (retval == 0)
-					break;
-				else
-					dev_dbg(dp->dev,
-						"%s: Aux Transaction fail!\n",
-						__func__);
-			}
-			/* Check if Rx sends defer */
-			reg = readl(dp->reg_base + EXYNOS_DP_AUX_RX_COMM);
-			if (reg == AUX_RX_COMM_AUX_DEFER ||
-				reg == AUX_RX_COMM_I2C_DEFER) {
-				dev_err(dp->dev, "Defer: %d\n\n", reg);
-				defer = 1;
-			}
-		}
-
-		for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
-			reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0
-						 + 4 * cur_data_idx);
-			edid[i + cur_data_idx] = (unsigned char)reg;
-		}
-	}
-
-	return retval;
-}
-
-void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32 bwtype)
-{
-	u32 reg;
-
-	reg = bwtype;
-	if ((bwtype == LINK_RATE_2_70GBPS) || (bwtype == LINK_RATE_1_62GBPS))
-		writel(reg, dp->reg_base + EXYNOS_DP_LINK_BW_SET);
-}
-
-void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32 *bwtype)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_LINK_BW_SET);
-	*bwtype = reg;
-}
-
-void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count)
-{
-	u32 reg;
-
-	reg = count;
-	writel(reg, dp->reg_base + EXYNOS_DP_LANE_COUNT_SET);
-}
-
-void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_LANE_COUNT_SET);
-	*count = reg;
-}
-
-void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool enable)
-{
-	u32 reg;
-
-	if (enable) {
-		reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
-		reg |= ENHANCED;
-		writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
-	} else {
-		reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
-		reg &= ~ENHANCED;
-		writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
-	}
-}
-
-void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
-				 enum pattern_set pattern)
-{
-	u32 reg;
-
-	switch (pattern) {
-	case PRBS7:
-		reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7;
-		writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
-		break;
-	case D10_2:
-		reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2;
-		writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
-		break;
-	case TRAINING_PTN1:
-		reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1;
-		writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
-		break;
-	case TRAINING_PTN2:
-		reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2;
-		writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
-		break;
-	case DP_NONE:
-		reg = SCRAMBLING_ENABLE |
-			LINK_QUAL_PATTERN_SET_DISABLE |
-			SW_TRAINING_PATTERN_SET_NORMAL;
-		writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
-		break;
-	default:
-		break;
-	}
-}
-
-void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32 level)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
-	reg &= ~PRE_EMPHASIS_SET_MASK;
-	reg |= level << PRE_EMPHASIS_SET_SHIFT;
-	writel(reg, dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32 level)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
-	reg &= ~PRE_EMPHASIS_SET_MASK;
-	reg |= level << PRE_EMPHASIS_SET_SHIFT;
-	writel(reg, dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32 level)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
-	reg &= ~PRE_EMPHASIS_SET_MASK;
-	reg |= level << PRE_EMPHASIS_SET_SHIFT;
-	writel(reg, dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32 level)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
-	reg &= ~PRE_EMPHASIS_SET_MASK;
-	reg |= level << PRE_EMPHASIS_SET_SHIFT;
-	writel(reg, dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
-					u32 training_lane)
-{
-	u32 reg;
-
-	reg = training_lane;
-	writel(reg, dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
-					u32 training_lane)
-{
-	u32 reg;
-
-	reg = training_lane;
-	writel(reg, dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
-					u32 training_lane)
-{
-	u32 reg;
-
-	reg = training_lane;
-	writel(reg, dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
-					u32 training_lane)
-{
-	u32 reg;
-
-	reg = training_lane;
-	writel(reg, dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
-}
-
-u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
-	return reg;
-}
-
-u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
-	return reg;
-}
-
-u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
-	return reg;
-}
-
-u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
-	return reg;
-}
-
-void exynos_dp_reset_macro(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_PHY_TEST);
-	reg |= MACRO_RST;
-	writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST);
-
-	/* 10 us is the minimum reset time. */
-	usleep_range(10, 20);
-
-	reg &= ~MACRO_RST;
-	writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST);
-}
-
-void exynos_dp_init_video(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
-	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
-
-	reg = 0x0;
-	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
-
-	reg = CHA_CRI(4) | CHA_CTRL;
-	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
-
-	reg = 0x0;
-	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
-
-	reg = VID_HRES_TH(2) | VID_VRES_TH(0);
-	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_8);
-}
-
-void exynos_dp_set_video_color_format(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	/* Configure the input color depth, color space, dynamic range */
-	reg = (dp->video_info->dynamic_range << IN_D_RANGE_SHIFT) |
-		(dp->video_info->color_depth << IN_BPC_SHIFT) |
-		(dp->video_info->color_space << IN_COLOR_F_SHIFT);
-	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_2);
-
-	/* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
-	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_3);
-	reg &= ~IN_YC_COEFFI_MASK;
-	if (dp->video_info->ycbcr_coeff)
-		reg |= IN_YC_COEFFI_ITU709;
-	else
-		reg |= IN_YC_COEFFI_ITU601;
-	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_3);
-}
-
-int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_1);
-	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
-
-	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_1);
-
-	if (!(reg & DET_STA)) {
-		dev_dbg(dp->dev, "Input stream clock not detected.\n");
-		return -EINVAL;
-	}
-
-	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_2);
-	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
-
-	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_2);
-	dev_dbg(dp->dev, "wait SYS_CTL_2.\n");
-
-	if (reg & CHA_STA) {
-		dev_dbg(dp->dev, "Input stream clk is changing\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
-		enum clock_recovery_m_value_type type,
-		u32 m_value,
-		u32 n_value)
-{
-	u32 reg;
-
-	if (type == REGISTER_M) {
-		reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
-		reg |= FIX_M_VID;
-		writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
-		reg = m_value & 0xff;
-		writel(reg, dp->reg_base + EXYNOS_DP_M_VID_0);
-		reg = (m_value >> 8) & 0xff;
-		writel(reg, dp->reg_base + EXYNOS_DP_M_VID_1);
-		reg = (m_value >> 16) & 0xff;
-		writel(reg, dp->reg_base + EXYNOS_DP_M_VID_2);
-
-		reg = n_value & 0xff;
-		writel(reg, dp->reg_base + EXYNOS_DP_N_VID_0);
-		reg = (n_value >> 8) & 0xff;
-		writel(reg, dp->reg_base + EXYNOS_DP_N_VID_1);
-		reg = (n_value >> 16) & 0xff;
-		writel(reg, dp->reg_base + EXYNOS_DP_N_VID_2);
-	} else  {
-		reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
-		reg &= ~FIX_M_VID;
-		writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
-
-		writel(0x00, dp->reg_base + EXYNOS_DP_N_VID_0);
-		writel(0x80, dp->reg_base + EXYNOS_DP_N_VID_1);
-		writel(0x00, dp->reg_base + EXYNOS_DP_N_VID_2);
-	}
-}
-
-void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32 type)
-{
-	u32 reg;
-
-	if (type == VIDEO_TIMING_FROM_CAPTURE) {
-		reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-		reg &= ~FORMAT_SEL;
-		writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-	} else {
-		reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-		reg |= FORMAT_SEL;
-		writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-	}
-}
-
-void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool enable)
-{
-	u32 reg;
-
-	if (enable) {
-		reg = readl(dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
-		reg &= ~VIDEO_MODE_MASK;
-		reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE;
-		writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
-	} else {
-		reg = readl(dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
-		reg &= ~VIDEO_MODE_MASK;
-		reg |= VIDEO_MODE_SLAVE_MODE;
-		writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
-	}
-}
-
-void exynos_dp_start_video(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
-	reg |= VIDEO_EN;
-	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
-}
-
-int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
-	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
-
-	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
-	if (!(reg & STRM_VALID)) {
-		dev_dbg(dp->dev, "Input video stream is not detected.\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1);
-	reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N);
-	reg |= MASTER_VID_FUNC_EN_N;
-	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
-
-	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-	reg &= ~INTERACE_SCAN_CFG;
-	reg |= (dp->video_info->interlaced << 2);
-	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-
-	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-	reg &= ~VSYNC_POLARITY_CFG;
-	reg |= (dp->video_info->v_sync_polarity << 1);
-	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-
-	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-	reg &= ~HSYNC_POLARITY_CFG;
-	reg |= (dp->video_info->h_sync_polarity << 0);
-	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-
-	reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
-	writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
-}
-
-void exynos_dp_enable_scrambling(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
-	reg &= ~SCRAMBLING_DISABLE;
-	writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
-}
-
-void exynos_dp_disable_scrambling(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = readl(dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
-	reg |= SCRAMBLING_DISABLE;
-	writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
-}
diff --git a/drivers/video/exynos/exynos_dp_reg.h b/drivers/video/exynos/exynos_dp_reg.h
deleted file mode 100644
index 2e9bd0e0b9f2..000000000000
--- a/drivers/video/exynos/exynos_dp_reg.h
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Register definition file for Samsung DP driver
- *
- * Copyright (C) 2012 Samsung Electronics Co., Ltd.
- * Author: Jingoo Han <jg1.han@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _EXYNOS_DP_REG_H
-#define _EXYNOS_DP_REG_H
-
-#define EXYNOS_DP_TX_SW_RESET			0x14
-#define EXYNOS_DP_FUNC_EN_1			0x18
-#define EXYNOS_DP_FUNC_EN_2			0x1C
-#define EXYNOS_DP_VIDEO_CTL_1			0x20
-#define EXYNOS_DP_VIDEO_CTL_2			0x24
-#define EXYNOS_DP_VIDEO_CTL_3			0x28
-
-#define EXYNOS_DP_VIDEO_CTL_8			0x3C
-#define EXYNOS_DP_VIDEO_CTL_10			0x44
-
-#define EXYNOS_DP_LANE_MAP			0x35C
-
-#define EXYNOS_DP_ANALOG_CTL_1			0x370
-#define EXYNOS_DP_ANALOG_CTL_2			0x374
-#define EXYNOS_DP_ANALOG_CTL_3			0x378
-#define EXYNOS_DP_PLL_FILTER_CTL_1		0x37C
-#define EXYNOS_DP_TX_AMP_TUNING_CTL		0x380
-
-#define EXYNOS_DP_AUX_HW_RETRY_CTL		0x390
-
-#define EXYNOS_DP_COMMON_INT_STA_1		0x3C4
-#define EXYNOS_DP_COMMON_INT_STA_2		0x3C8
-#define EXYNOS_DP_COMMON_INT_STA_3		0x3CC
-#define EXYNOS_DP_COMMON_INT_STA_4		0x3D0
-#define EXYNOS_DP_INT_STA			0x3DC
-#define EXYNOS_DP_COMMON_INT_MASK_1		0x3E0
-#define EXYNOS_DP_COMMON_INT_MASK_2		0x3E4
-#define EXYNOS_DP_COMMON_INT_MASK_3		0x3E8
-#define EXYNOS_DP_COMMON_INT_MASK_4		0x3EC
-#define EXYNOS_DP_INT_STA_MASK			0x3F8
-#define EXYNOS_DP_INT_CTL			0x3FC
-
-#define EXYNOS_DP_SYS_CTL_1			0x600
-#define EXYNOS_DP_SYS_CTL_2			0x604
-#define EXYNOS_DP_SYS_CTL_3			0x608
-#define EXYNOS_DP_SYS_CTL_4			0x60C
-
-#define EXYNOS_DP_PKT_SEND_CTL			0x640
-#define EXYNOS_DP_HDCP_CTL			0x648
-
-#define EXYNOS_DP_LINK_BW_SET			0x680
-#define EXYNOS_DP_LANE_COUNT_SET		0x684
-#define EXYNOS_DP_TRAINING_PTN_SET		0x688
-#define EXYNOS_DP_LN0_LINK_TRAINING_CTL		0x68C
-#define EXYNOS_DP_LN1_LINK_TRAINING_CTL		0x690
-#define EXYNOS_DP_LN2_LINK_TRAINING_CTL		0x694
-#define EXYNOS_DP_LN3_LINK_TRAINING_CTL		0x698
-
-#define EXYNOS_DP_DEBUG_CTL			0x6C0
-#define EXYNOS_DP_HPD_DEGLITCH_L		0x6C4
-#define EXYNOS_DP_HPD_DEGLITCH_H		0x6C8
-#define EXYNOS_DP_LINK_DEBUG_CTL		0x6E0
-
-#define EXYNOS_DP_M_VID_0			0x700
-#define EXYNOS_DP_M_VID_1			0x704
-#define EXYNOS_DP_M_VID_2			0x708
-#define EXYNOS_DP_N_VID_0			0x70C
-#define EXYNOS_DP_N_VID_1			0x710
-#define EXYNOS_DP_N_VID_2			0x714
-
-#define EXYNOS_DP_PLL_CTL			0x71C
-#define EXYNOS_DP_PHY_PD			0x720
-#define EXYNOS_DP_PHY_TEST			0x724
-
-#define EXYNOS_DP_VIDEO_FIFO_THRD		0x730
-#define EXYNOS_DP_AUDIO_MARGIN			0x73C
-
-#define EXYNOS_DP_M_VID_GEN_FILTER_TH		0x764
-#define EXYNOS_DP_M_AUD_GEN_FILTER_TH		0x778
-#define EXYNOS_DP_AUX_CH_STA			0x780
-#define EXYNOS_DP_AUX_CH_DEFER_CTL		0x788
-#define EXYNOS_DP_AUX_RX_COMM			0x78C
-#define EXYNOS_DP_BUFFER_DATA_CTL		0x790
-#define EXYNOS_DP_AUX_CH_CTL_1			0x794
-#define EXYNOS_DP_AUX_ADDR_7_0			0x798
-#define EXYNOS_DP_AUX_ADDR_15_8			0x79C
-#define EXYNOS_DP_AUX_ADDR_19_16		0x7A0
-#define EXYNOS_DP_AUX_CH_CTL_2			0x7A4
-
-#define EXYNOS_DP_BUF_DATA_0			0x7C0
-
-#define EXYNOS_DP_SOC_GENERAL_CTL		0x800
-
-/* EXYNOS_DP_TX_SW_RESET */
-#define RESET_DP_TX				(0x1 << 0)
-
-/* EXYNOS_DP_FUNC_EN_1 */
-#define MASTER_VID_FUNC_EN_N			(0x1 << 7)
-#define SLAVE_VID_FUNC_EN_N			(0x1 << 5)
-#define AUD_FIFO_FUNC_EN_N			(0x1 << 4)
-#define AUD_FUNC_EN_N				(0x1 << 3)
-#define HDCP_FUNC_EN_N				(0x1 << 2)
-#define CRC_FUNC_EN_N				(0x1 << 1)
-#define SW_FUNC_EN_N				(0x1 << 0)
-
-/* EXYNOS_DP_FUNC_EN_2 */
-#define SSC_FUNC_EN_N				(0x1 << 7)
-#define AUX_FUNC_EN_N				(0x1 << 2)
-#define SERDES_FIFO_FUNC_EN_N			(0x1 << 1)
-#define LS_CLK_DOMAIN_FUNC_EN_N			(0x1 << 0)
-
-/* EXYNOS_DP_VIDEO_CTL_1 */
-#define VIDEO_EN				(0x1 << 7)
-#define HDCP_VIDEO_MUTE				(0x1 << 6)
-
-/* EXYNOS_DP_VIDEO_CTL_1 */
-#define IN_D_RANGE_MASK				(0x1 << 7)
-#define IN_D_RANGE_SHIFT			(7)
-#define IN_D_RANGE_CEA				(0x1 << 7)
-#define IN_D_RANGE_VESA				(0x0 << 7)
-#define IN_BPC_MASK				(0x7 << 4)
-#define IN_BPC_SHIFT				(4)
-#define IN_BPC_12_BITS				(0x3 << 4)
-#define IN_BPC_10_BITS				(0x2 << 4)
-#define IN_BPC_8_BITS				(0x1 << 4)
-#define IN_BPC_6_BITS				(0x0 << 4)
-#define IN_COLOR_F_MASK				(0x3 << 0)
-#define IN_COLOR_F_SHIFT			(0)
-#define IN_COLOR_F_YCBCR444			(0x2 << 0)
-#define IN_COLOR_F_YCBCR422			(0x1 << 0)
-#define IN_COLOR_F_RGB				(0x0 << 0)
-
-/* EXYNOS_DP_VIDEO_CTL_3 */
-#define IN_YC_COEFFI_MASK			(0x1 << 7)
-#define IN_YC_COEFFI_SHIFT			(7)
-#define IN_YC_COEFFI_ITU709			(0x1 << 7)
-#define IN_YC_COEFFI_ITU601			(0x0 << 7)
-#define VID_CHK_UPDATE_TYPE_MASK		(0x1 << 4)
-#define VID_CHK_UPDATE_TYPE_SHIFT		(4)
-#define VID_CHK_UPDATE_TYPE_1			(0x1 << 4)
-#define VID_CHK_UPDATE_TYPE_0			(0x0 << 4)
-
-/* EXYNOS_DP_VIDEO_CTL_8 */
-#define VID_HRES_TH(x)				(((x) & 0xf) << 4)
-#define VID_VRES_TH(x)				(((x) & 0xf) << 0)
-
-/* EXYNOS_DP_VIDEO_CTL_10 */
-#define FORMAT_SEL				(0x1 << 4)
-#define INTERACE_SCAN_CFG			(0x1 << 2)
-#define VSYNC_POLARITY_CFG			(0x1 << 1)
-#define HSYNC_POLARITY_CFG			(0x1 << 0)
-
-/* EXYNOS_DP_LANE_MAP */
-#define LANE3_MAP_LOGIC_LANE_0			(0x0 << 6)
-#define LANE3_MAP_LOGIC_LANE_1			(0x1 << 6)
-#define LANE3_MAP_LOGIC_LANE_2			(0x2 << 6)
-#define LANE3_MAP_LOGIC_LANE_3			(0x3 << 6)
-#define LANE2_MAP_LOGIC_LANE_0			(0x0 << 4)
-#define LANE2_MAP_LOGIC_LANE_1			(0x1 << 4)
-#define LANE2_MAP_LOGIC_LANE_2			(0x2 << 4)
-#define LANE2_MAP_LOGIC_LANE_3			(0x3 << 4)
-#define LANE1_MAP_LOGIC_LANE_0			(0x0 << 2)
-#define LANE1_MAP_LOGIC_LANE_1			(0x1 << 2)
-#define LANE1_MAP_LOGIC_LANE_2			(0x2 << 2)
-#define LANE1_MAP_LOGIC_LANE_3			(0x3 << 2)
-#define LANE0_MAP_LOGIC_LANE_0			(0x0 << 0)
-#define LANE0_MAP_LOGIC_LANE_1			(0x1 << 0)
-#define LANE0_MAP_LOGIC_LANE_2			(0x2 << 0)
-#define LANE0_MAP_LOGIC_LANE_3			(0x3 << 0)
-
-/* EXYNOS_DP_ANALOG_CTL_1 */
-#define TX_TERMINAL_CTRL_50_OHM			(0x1 << 4)
-
-/* EXYNOS_DP_ANALOG_CTL_2 */
-#define SEL_24M					(0x1 << 3)
-#define TX_DVDD_BIT_1_0625V			(0x4 << 0)
-
-/* EXYNOS_DP_ANALOG_CTL_3 */
-#define DRIVE_DVDD_BIT_1_0625V			(0x4 << 5)
-#define VCO_BIT_600_MICRO			(0x5 << 0)
-
-/* EXYNOS_DP_PLL_FILTER_CTL_1 */
-#define PD_RING_OSC				(0x1 << 6)
-#define AUX_TERMINAL_CTRL_50_OHM		(0x2 << 4)
-#define TX_CUR1_2X				(0x1 << 2)
-#define TX_CUR_16_MA				(0x3 << 0)
-
-/* EXYNOS_DP_TX_AMP_TUNING_CTL */
-#define CH3_AMP_400_MV				(0x0 << 24)
-#define CH2_AMP_400_MV				(0x0 << 16)
-#define CH1_AMP_400_MV				(0x0 << 8)
-#define CH0_AMP_400_MV				(0x0 << 0)
-
-/* EXYNOS_DP_AUX_HW_RETRY_CTL */
-#define AUX_BIT_PERIOD_EXPECTED_DELAY(x)	(((x) & 0x7) << 8)
-#define AUX_HW_RETRY_INTERVAL_MASK		(0x3 << 3)
-#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS	(0x0 << 3)
-#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS	(0x1 << 3)
-#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS	(0x2 << 3)
-#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS	(0x3 << 3)
-#define AUX_HW_RETRY_COUNT_SEL(x)		(((x) & 0x7) << 0)
-
-/* EXYNOS_DP_COMMON_INT_STA_1 */
-#define VSYNC_DET				(0x1 << 7)
-#define PLL_LOCK_CHG				(0x1 << 6)
-#define SPDIF_ERR				(0x1 << 5)
-#define SPDIF_UNSTBL				(0x1 << 4)
-#define VID_FORMAT_CHG				(0x1 << 3)
-#define AUD_CLK_CHG				(0x1 << 2)
-#define VID_CLK_CHG				(0x1 << 1)
-#define SW_INT					(0x1 << 0)
-
-/* EXYNOS_DP_COMMON_INT_STA_2 */
-#define ENC_EN_CHG				(0x1 << 6)
-#define HW_BKSV_RDY				(0x1 << 3)
-#define HW_SHA_DONE				(0x1 << 2)
-#define HW_AUTH_STATE_CHG			(0x1 << 1)
-#define HW_AUTH_DONE				(0x1 << 0)
-
-/* EXYNOS_DP_COMMON_INT_STA_3 */
-#define AFIFO_UNDER				(0x1 << 7)
-#define AFIFO_OVER				(0x1 << 6)
-#define R0_CHK_FLAG				(0x1 << 5)
-
-/* EXYNOS_DP_COMMON_INT_STA_4 */
-#define PSR_ACTIVE				(0x1 << 7)
-#define PSR_INACTIVE				(0x1 << 6)
-#define SPDIF_BI_PHASE_ERR			(0x1 << 5)
-#define HOTPLUG_CHG				(0x1 << 2)
-#define HPD_LOST				(0x1 << 1)
-#define PLUG					(0x1 << 0)
-
-/* EXYNOS_DP_INT_STA */
-#define INT_HPD					(0x1 << 6)
-#define HW_TRAINING_FINISH			(0x1 << 5)
-#define RPLY_RECEIV				(0x1 << 1)
-#define AUX_ERR					(0x1 << 0)
-
-/* EXYNOS_DP_INT_CTL */
-#define SOFT_INT_CTRL				(0x1 << 2)
-#define INT_POL1				(0x1 << 1)
-#define INT_POL0				(0x1 << 0)
-
-/* EXYNOS_DP_SYS_CTL_1 */
-#define DET_STA					(0x1 << 2)
-#define FORCE_DET				(0x1 << 1)
-#define DET_CTRL				(0x1 << 0)
-
-/* EXYNOS_DP_SYS_CTL_2 */
-#define CHA_CRI(x)				(((x) & 0xf) << 4)
-#define CHA_STA					(0x1 << 2)
-#define FORCE_CHA				(0x1 << 1)
-#define CHA_CTRL				(0x1 << 0)
-
-/* EXYNOS_DP_SYS_CTL_3 */
-#define HPD_STATUS				(0x1 << 6)
-#define F_HPD					(0x1 << 5)
-#define HPD_CTRL				(0x1 << 4)
-#define HDCP_RDY				(0x1 << 3)
-#define STRM_VALID				(0x1 << 2)
-#define F_VALID					(0x1 << 1)
-#define VALID_CTRL				(0x1 << 0)
-
-/* EXYNOS_DP_SYS_CTL_4 */
-#define FIX_M_AUD				(0x1 << 4)
-#define ENHANCED				(0x1 << 3)
-#define FIX_M_VID				(0x1 << 2)
-#define M_VID_UPDATE_CTRL			(0x3 << 0)
-
-/* EXYNOS_DP_TRAINING_PTN_SET */
-#define SCRAMBLER_TYPE				(0x1 << 9)
-#define HW_LINK_TRAINING_PATTERN		(0x1 << 8)
-#define SCRAMBLING_DISABLE			(0x1 << 5)
-#define SCRAMBLING_ENABLE			(0x0 << 5)
-#define LINK_QUAL_PATTERN_SET_MASK		(0x3 << 2)
-#define LINK_QUAL_PATTERN_SET_PRBS7		(0x3 << 2)
-#define LINK_QUAL_PATTERN_SET_D10_2		(0x1 << 2)
-#define LINK_QUAL_PATTERN_SET_DISABLE		(0x0 << 2)
-#define SW_TRAINING_PATTERN_SET_MASK		(0x3 << 0)
-#define SW_TRAINING_PATTERN_SET_PTN2		(0x2 << 0)
-#define SW_TRAINING_PATTERN_SET_PTN1		(0x1 << 0)
-#define SW_TRAINING_PATTERN_SET_NORMAL		(0x0 << 0)
-
-/* EXYNOS_DP_LN0_LINK_TRAINING_CTL */
-#define PRE_EMPHASIS_SET_MASK			(0x3 << 3)
-#define PRE_EMPHASIS_SET_SHIFT			(3)
-
-/* EXYNOS_DP_DEBUG_CTL */
-#define PLL_LOCK				(0x1 << 4)
-#define F_PLL_LOCK				(0x1 << 3)
-#define PLL_LOCK_CTRL				(0x1 << 2)
-#define PN_INV					(0x1 << 0)
-
-/* EXYNOS_DP_PLL_CTL */
-#define DP_PLL_PD				(0x1 << 7)
-#define DP_PLL_RESET				(0x1 << 6)
-#define DP_PLL_LOOP_BIT_DEFAULT			(0x1 << 4)
-#define DP_PLL_REF_BIT_1_1250V			(0x5 << 0)
-#define DP_PLL_REF_BIT_1_2500V			(0x7 << 0)
-
-/* EXYNOS_DP_PHY_PD */
-#define DP_PHY_PD				(0x1 << 5)
-#define AUX_PD					(0x1 << 4)
-#define CH3_PD					(0x1 << 3)
-#define CH2_PD					(0x1 << 2)
-#define CH1_PD					(0x1 << 1)
-#define CH0_PD					(0x1 << 0)
-
-/* EXYNOS_DP_PHY_TEST */
-#define MACRO_RST				(0x1 << 5)
-#define CH1_TEST				(0x1 << 1)
-#define CH0_TEST				(0x1 << 0)
-
-/* EXYNOS_DP_AUX_CH_STA */
-#define AUX_BUSY				(0x1 << 4)
-#define AUX_STATUS_MASK				(0xf << 0)
-
-/* EXYNOS_DP_AUX_CH_DEFER_CTL */
-#define DEFER_CTRL_EN				(0x1 << 7)
-#define DEFER_COUNT(x)				(((x) & 0x7f) << 0)
-
-/* EXYNOS_DP_AUX_RX_COMM */
-#define AUX_RX_COMM_I2C_DEFER			(0x2 << 2)
-#define AUX_RX_COMM_AUX_DEFER			(0x2 << 0)
-
-/* EXYNOS_DP_BUFFER_DATA_CTL */
-#define BUF_CLR					(0x1 << 7)
-#define BUF_DATA_COUNT(x)			(((x) & 0x1f) << 0)
-
-/* EXYNOS_DP_AUX_CH_CTL_1 */
-#define AUX_LENGTH(x)				(((x - 1) & 0xf) << 4)
-#define AUX_TX_COMM_MASK			(0xf << 0)
-#define AUX_TX_COMM_DP_TRANSACTION		(0x1 << 3)
-#define AUX_TX_COMM_I2C_TRANSACTION		(0x0 << 3)
-#define AUX_TX_COMM_MOT				(0x1 << 2)
-#define AUX_TX_COMM_WRITE			(0x0 << 0)
-#define AUX_TX_COMM_READ			(0x1 << 0)
-
-/* EXYNOS_DP_AUX_ADDR_7_0 */
-#define AUX_ADDR_7_0(x)				(((x) >> 0) & 0xff)
-
-/* EXYNOS_DP_AUX_ADDR_15_8 */
-#define AUX_ADDR_15_8(x)			(((x) >> 8) & 0xff)
-
-/* EXYNOS_DP_AUX_ADDR_19_16 */
-#define AUX_ADDR_19_16(x)			(((x) >> 16) & 0x0f)
-
-/* EXYNOS_DP_AUX_CH_CTL_2 */
-#define ADDR_ONLY				(0x1 << 1)
-#define AUX_EN					(0x1 << 0)
-
-/* EXYNOS_DP_SOC_GENERAL_CTL */
-#define AUDIO_MODE_SPDIF_MODE			(0x1 << 8)
-#define AUDIO_MODE_MASTER_MODE			(0x0 << 8)
-#define MASTER_VIDEO_INTERLACE_EN		(0x1 << 4)
-#define VIDEO_MASTER_CLK_SEL			(0x1 << 2)
-#define VIDEO_MASTER_MODE_EN			(0x1 << 1)
-#define VIDEO_MODE_MASK				(0x1 << 0)
-#define VIDEO_MODE_SLAVE_MODE			(0x1 << 0)
-#define VIDEO_MODE_MASTER_MODE			(0x0 << 0)
-
-#endif /* _EXYNOS_DP_REG_H */
diff --git a/drivers/video/68328fb.c b/drivers/video/fbdev/68328fb.c
index 552258c8f99d..552258c8f99d 100644
--- a/drivers/video/68328fb.c
+++ b/drivers/video/fbdev/68328fb.c
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
new file mode 100644
index 000000000000..e1f47272fdea
--- /dev/null
+++ b/drivers/video/fbdev/Kconfig
@@ -0,0 +1,2474 @@
+#
+# fbdev configuration
+#
+
+menuconfig FB
+	tristate "Support for frame buffer devices"
+	---help---
+	  The frame buffer device provides an abstraction for the graphics
+	  hardware. It represents the frame buffer of some video hardware and
+	  allows application software to access the graphics hardware through
+	  a well-defined interface, so the software doesn't need to know
+	  anything about the low-level (hardware register) stuff.
+
+	  Frame buffer devices work identically across the different
+	  architectures supported by Linux and make the implementation of
+	  application programs easier and more portable; at this point, an X
+	  server exists which uses the frame buffer device exclusively.
+	  On several non-X86 architectures, the frame buffer device is the
+	  only way to use the graphics hardware.
+
+	  The device is accessed through special device nodes, usually located
+	  in the /dev directory, i.e. /dev/fb*.
+
+	  You need an utility program called fbset to make full use of frame
+	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+	  and the Framebuffer-HOWTO at
+	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
+	  information.
+
+	  Say Y here and to the driver for your graphics board below if you
+	  are compiling a kernel for a non-x86 architecture.
+
+	  If you are compiling for the x86 architecture, you can say Y if you
+	  want to play with it, but it is not essential. Please note that
+	  running graphical applications that directly touch the hardware
+	  (e.g. an accelerated X server) and that are not frame buffer
+	  device-aware may cause unexpected results. If unsure, say N.
+
+config FIRMWARE_EDID
+       bool "Enable firmware EDID"
+       depends on FB
+       default n
+       ---help---
+         This enables access to the EDID transferred from the firmware.
+	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+	 transfers do not work for your driver and if you are using
+	 nvidiafb, i810fb or savagefb.
+
+	 In general, choosing Y for this option is safe.  If you
+	 experience extremely long delays while booting before you get
+	 something on your display, try setting this to N.  Matrox cards in
+	 combination with certain motherboards and monitors are known to
+	 suffer from this problem.
+
+config FB_DDC
+       tristate
+       depends on FB
+       select I2C_ALGOBIT
+       select I2C
+       default n
+
+config FB_BOOT_VESA_SUPPORT
+	bool
+	depends on FB
+	default n
+	---help---
+	  If true, at least one selected framebuffer driver can take advantage
+	  of VESA video modes set at an early boot stage via the vga= parameter.
+
+config FB_CFB_FILLRECT
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the cfb_fillrect function for generic software rectangle
+	  filling. This is used by drivers that don't provide their own
+	  (accelerated) version.
+
+config FB_CFB_COPYAREA
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the cfb_copyarea function for generic software area copying.
+	  This is used by drivers that don't provide their own (accelerated)
+	  version.
+
+config FB_CFB_IMAGEBLIT
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the cfb_imageblit function for generic software image
+	  blitting. This is used by drivers that don't provide their own
+	  (accelerated) version.
+
+config FB_CFB_REV_PIXELS_IN_BYTE
+	bool
+	depends on FB
+	default n
+	---help---
+	  Allow generic frame-buffer functions to work on displays with 1, 2
+	  and 4 bits per pixel depths which has opposite order of pixels in
+	  byte order to bytes in long order.
+
+config FB_SYS_FILLRECT
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the sys_fillrect function for generic software rectangle
+	  filling. This is used by drivers that don't provide their own
+	  (accelerated) version and the framebuffer is in system RAM.
+
+config FB_SYS_COPYAREA
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the sys_copyarea function for generic software area copying.
+	  This is used by drivers that don't provide their own (accelerated)
+	  version and the framebuffer is in system RAM.
+
+config FB_SYS_IMAGEBLIT
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the sys_imageblit function for generic software image
+	  blitting. This is used by drivers that don't provide their own
+	  (accelerated) version and the framebuffer is in system RAM.
+
+menuconfig FB_FOREIGN_ENDIAN
+	bool "Framebuffer foreign endianness support"
+	depends on FB
+	---help---
+	  This menu will let you enable support for the framebuffers with
+	  non-native endianness (e.g. Little-Endian framebuffer on a
+	  Big-Endian machine). Most probably you don't have such hardware,
+	  so it's safe to say "n" here.
+
+choice
+	prompt "Choice endianness support"
+	depends on FB_FOREIGN_ENDIAN
+
+config FB_BOTH_ENDIAN
+	bool "Support for Big- and Little-Endian framebuffers"
+
+config FB_BIG_ENDIAN
+	bool "Support for Big-Endian framebuffers only"
+
+config FB_LITTLE_ENDIAN
+	bool "Support for Little-Endian framebuffers only"
+
+endchoice
+
+config FB_SYS_FOPS
+       tristate
+       depends on FB
+       default n
+
+config FB_DEFERRED_IO
+	bool
+	depends on FB
+
+config FB_HECUBA
+	tristate
+	depends on FB
+	depends on FB_DEFERRED_IO
+
+config FB_SVGALIB
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Common utility functions useful to fbdev drivers of VGA-based
+	  cards.
+
+config FB_MACMODES
+       tristate
+       depends on FB
+       default n
+
+config FB_BACKLIGHT
+	bool
+	depends on FB
+	select BACKLIGHT_LCD_SUPPORT
+	select BACKLIGHT_CLASS_DEVICE
+	default n
+
+config FB_MODE_HELPERS
+        bool "Enable Video Mode Handling Helpers"
+        depends on FB
+	default n
+	---help---
+	  This enables functions for handling video modes using the
+	  Generalized Timing Formula and the EDID parser. A few drivers rely
+          on this feature such as the radeonfb, rivafb, and the i810fb. If
+	  your driver does not take advantage of this feature, choosing Y will
+	  just increase the kernel size by about 5K.
+
+config FB_TILEBLITTING
+       bool "Enable Tile Blitting Support"
+       depends on FB
+       default n
+       ---help---
+         This enables tile blitting.  Tile blitting is a drawing technique
+	 where the screen is divided into rectangular sections (tiles), whereas
+	 the standard blitting divides the screen into pixels. Because the
+	 default drawing element is a tile, drawing functions will be passed
+	 parameters in terms of number of tiles instead of number of pixels.
+	 For example, to draw a single character, instead of using bitmaps,
+	 an index to an array of bitmaps will be used.  To clear or move a
+	 rectangular section of a screen, the rectangle will be described in
+	 terms of number of tiles in the x- and y-axis.
+
+	 This is particularly important to one driver, matroxfb.  If
+	 unsure, say N.
+
+comment "Frame buffer hardware drivers"
+	depends on FB
+
+config FB_GRVGA
+	tristate "Aeroflex Gaisler framebuffer support"
+	depends on FB && SPARC
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
+
+config FB_CIRRUS
+	tristate "Cirrus Logic support"
+	depends on FB && (ZORRO || PCI)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  This enables support for Cirrus Logic GD542x/543x based boards on
+	  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
+
+	  If you have a PCI-based system, this enables support for these
+	  chips: GD-543x, GD-544x, GD-5480.
+
+	  Please read the file <file:Documentation/fb/cirrusfb.txt>.
+
+	  Say N unless you have such a graphics board or plan to get one
+	  before you next recompile the kernel.
+
+config FB_PM2
+	tristate "Permedia2 support"
+	depends on FB && ((AMIGA && BROKEN) || PCI)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for cards based on
+	  the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
+	  The driver was tested on the following cards:
+		Diamond FireGL 1000 PRO AGP
+		ELSA Gloria Synergy PCI
+		Appian Jeronimo PRO (both heads) PCI
+		3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
+		Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
+		ASK Graphic Blaster Exxtreme AGP
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pm2fb.
+
+config FB_PM2_FIFO_DISCONNECT
+	bool "enable FIFO disconnect feature"
+	depends on FB_PM2 && PCI
+	help
+	  Support the Permedia2 FIFO disconnect feature.
+
+config FB_ARMCLCD
+	tristate "ARM PrimeCell PL110 support"
+	depends on ARM || ARM64 || COMPILE_TEST
+	depends on FB && ARM_AMBA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This framebuffer device driver is for the ARM PrimeCell PL110
+	  Colour LCD controller.  ARM PrimeCells provide the building
+	  blocks for System on a Chip devices.
+
+	  If you want to compile this as a module (=code which can be
+	  inserted into and removed from the running kernel), say M
+	  here and read <file:Documentation/kbuild/modules.txt>.  The module
+	  will be called amba-clcd.
+
+config FB_ACORN
+	bool "Acorn VIDC support"
+	depends on (FB = y) && ARM && ARCH_ACORN
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Acorn VIDC graphics
+	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
+	  unsure, say N.
+
+config FB_CLPS711X
+	bool "CLPS711X LCD support"
+	depends on (FB = y) && ARM && ARCH_CLPS711X
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y to enable the Framebuffer driver for the CLPS7111 and
+	  EP7212 processors.
+
+config FB_SA1100
+	bool "SA-1100 LCD support"
+	depends on (FB = y) && ARM && ARCH_SA1100
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is a framebuffer device for the SA-1100 LCD Controller.
+	  See <http://www.linux-fbdev.org/> for information on framebuffer
+	  devices.
+
+	  If you plan to use the LCD display with your SA-1100 system, say
+	  Y here.
+
+config FB_IMX
+	tristate "Freescale i.MX1/21/25/27 LCD support"
+	depends on FB && ARCH_MXC
+	select BACKLIGHT_LCD_SUPPORT
+	select LCD_CLASS_DEVICE
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+
+config FB_CYBER2000
+	tristate "CyberPro 2000/2010/5000 support"
+	depends on FB && PCI && (BROKEN || !SPARC64)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This enables support for the Integraphics CyberPro 20x0 and 5000
+	  VGA chips used in the Rebel.com Netwinder and other machines.
+	  Say Y if you have a NetWinder or a graphics card containing this
+	  device, otherwise say N.
+
+config FB_CYBER2000_DDC
+	bool "DDC for CyberPro support"
+	depends on FB_CYBER2000
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC support for your CyberPro graphics
+	  card. This is only I2C bus support, driver does not use EDID.
+
+config FB_CYBER2000_I2C
+	bool "CyberPro 2000/2010/5000 I2C support"
+	depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
+	select I2C_ALGOBIT
+	help
+	  Enable support for the I2C video decoder interface on the
+	  Integraphics CyberPro 20x0 and 5000 VGA chips.  This is used
+	  on the Netwinder machines for the SAA7111 video capture.
+
+config FB_APOLLO
+	bool
+	depends on (FB = y) && APOLLO
+	default y
+	select FB_CFB_FILLRECT
+	select FB_CFB_IMAGEBLIT
+
+config FB_Q40
+	bool
+	depends on (FB = y) && Q40
+	default y
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+
+config FB_AMIGA
+	tristate "Amiga native chipset support"
+	depends on FB && AMIGA
+	help
+	  This is the frame buffer device driver for the builtin graphics
+	  chipset found in Amigas.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called amifb.
+
+config FB_AMIGA_OCS
+	bool "Amiga OCS chipset support"
+	depends on FB_AMIGA
+	help
+	  This enables support for the original Agnus and Denise video chips,
+	  found in the Amiga 1000 and most A500's and A2000's. If you intend
+	  to run Linux on any of these systems, say Y; otherwise say N.
+
+config FB_AMIGA_ECS
+	bool "Amiga ECS chipset support"
+	depends on FB_AMIGA
+	help
+	  This enables support for the Enhanced Chip Set, found in later
+	  A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
+	  you intend to run Linux on any of these systems, say Y; otherwise
+	  say N.
+
+config FB_AMIGA_AGA
+	bool "Amiga AGA chipset support"
+	depends on FB_AMIGA
+	help
+	  This enables support for the Advanced Graphics Architecture (also
+	  known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
+	  and CD32. If you intend to run Linux on any of these systems, say Y;
+	  otherwise say N.
+
+config FB_FM2
+	bool "Amiga FrameMaster II/Rainbow II support"
+	depends on (FB = y) && ZORRO
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Amiga FrameMaster
+	  card from BSC (exhibited 1992 but not shipped as a CBM product).
+
+config FB_ARC
+	tristate "Arc Monochrome LCD board support"
+	depends on FB && X86
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	help
+	  This enables support for the Arc Monochrome LCD board. The board
+	  is based on the KS-108 lcd controller and is typically a matrix
+	  of 2*n chips. This driver was tested with a 128x64 panel. This
+	  driver supports it for use with x86 SBCs through a 16 bit GPIO
+	  interface (8 bit data, 8 bit control). If you anticipate using
+	  this driver, say Y or M; otherwise say N. You must specify the
+	  GPIO IO address to be used for setting control and data.
+
+config FB_ATARI
+	bool "Atari native chipset support"
+	depends on (FB = y) && ATARI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the builtin graphics
+	  chipset found in Ataris.
+
+config FB_OF
+	bool "Open Firmware frame buffer device support"
+	depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+	help
+	  Say Y if you want support with Open Firmware for your graphics
+	  board.
+
+config FB_CONTROL
+	bool "Apple \"control\" display support"
+	depends on (FB = y) && PPC_PMAC && PPC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+	help
+	  This driver supports a frame buffer for the graphics adapter in the
+	  Power Macintosh 7300 and others.
+
+config FB_PLATINUM
+	bool "Apple \"platinum\" display support"
+	depends on (FB = y) && PPC_PMAC && PPC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+	help
+	  This driver supports a frame buffer for the "platinum" graphics
+	  adapter in some Power Macintoshes.
+
+config FB_VALKYRIE
+	bool "Apple \"valkyrie\" display support"
+	depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+	help
+	  This driver supports a frame buffer for the "valkyrie" graphics
+	  adapter in some Power Macintoshes.
+
+config FB_CT65550
+	bool "Chips 65550 display support"
+	depends on (FB = y) && PPC32 && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Chips & Technologies
+	  65550 graphics chip in PowerBooks.
+
+config FB_ASILIANT
+	bool "Asiliant (Chips) 69000 display support"
+	depends on (FB = y) && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Asiliant 69030 chipset
+
+config FB_IMSTT
+	bool "IMS Twin Turbo display support"
+	depends on (FB = y) && PCI
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES if PPC
+	help
+	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
+	  many Macintosh and compatible computers.
+
+config FB_VGA16
+	tristate "VGA 16-color graphics support"
+	depends on FB && (X86 || PPC)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	help
+	  This is the frame buffer device driver for VGA 16 color graphic
+	  cards. Say Y if you have such a card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vga16fb.
+
+config FB_BF54X_LQ043
+	tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
+	depends on FB && (BF54x) && !BF542
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
+
+config FB_BFIN_T350MCQB
+	tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
+	depends on FB && BLACKFIN
+	select BFIN_GPTIMERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
+	 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+	 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+config FB_BFIN_LQ035Q1
+	tristate "SHARP LQ035Q1DH02 TFT LCD"
+	depends on FB && BLACKFIN && SPI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BFIN_GPTIMERS
+	help
+	  This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
+	  the Blackfin Landscape LCD EZ-Extender Card.
+	  This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
+	  It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin-lq035q1-fb.
+
+config FB_BF537_LQ035
+	tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
+	depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BFIN_GPTIMERS
+	help
+	  This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
+	  attached to a BF537.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bf537-lq035.
+
+config FB_BFIN_7393
+	tristate "Blackfin ADV7393 Video encoder"
+	depends on FB && BLACKFIN
+	select I2C
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for a ADV7393 video encoder
+	  attached to a Blackfin on the PPI port.
+	  If your Blackfin board has a ADV7393 select Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin_adv7393fb.
+
+choice
+	prompt  "Video mode support"
+	depends on FB_BFIN_7393
+	default NTSC
+
+config NTSC
+	bool 'NTSC 720x480'
+
+config PAL
+	bool 'PAL 720x576'
+
+config NTSC_640x480
+	bool 'NTSC 640x480 (Experimental)'
+
+config PAL_640x480
+	bool 'PAL 640x480 (Experimental)'
+
+config NTSC_YCBCR
+	bool 'NTSC 720x480 YCbCR input'
+
+config PAL_YCBCR
+	bool 'PAL 720x576 YCbCR input'
+
+endchoice
+
+choice
+	prompt  "Size of ADV7393 frame buffer memory Single/Double Size"
+	depends on (FB_BFIN_7393)
+	default ADV7393_1XMEM
+
+config ADV7393_1XMEM
+	bool 'Single'
+
+config ADV7393_2XMEM
+	bool 'Double'
+endchoice
+
+config FB_STI
+	tristate "HP STI frame buffer device support"
+	depends on FB && PARISC
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select STI_CONSOLE
+	select VT
+	default y
+	---help---
+	  STI refers to the HP "Standard Text Interface" which is a set of
+	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
+	  Enabling this option will implement the linux framebuffer device
+	  using calls to the STI BIOS routines for initialisation.
+	
+	  If you enable this option, you will get a planar framebuffer device
+	  /dev/fb which will work on the most common HP graphic cards of the
+	  NGLE family, including the artist chips (in the 7xx and Bxxx series),
+	  HCRX, HCRX24, CRX, CRX24 and VisEG series.
+
+	  It is safe to enable this option, so you should probably say "Y".
+
+config FB_MAC
+	bool "Generic Macintosh display support"
+	depends on (FB = y) && MAC
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+
+config FB_HP300
+	bool
+	depends on (FB = y) && DIO
+	select FB_CFB_IMAGEBLIT
+	default y
+
+config FB_TGA
+	tristate "TGA/SFB+ framebuffer support"
+	depends on FB && (ALPHA || TC)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BITREVERSE
+	---help---
+	  This is the frame buffer device driver for generic TGA and SFB+
+	  graphic cards.  These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
+	  also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
+	  TURBOchannel cards, also known as PMAGD-A, -B and -C.
+
+	  Due to hardware limitations ZLX-E2 and E3 cards are not supported
+	  for DECstation 5000/200 systems.  Additionally due to firmware
+	  limitations these cards may cause troubles with booting DECstation
+	  5000/240 and /260 systems, but are fully supported under Linux if
+	  you manage to get it going. ;-)
+
+	  Say Y if you have one of those.
+
+config FB_UVESA
+	tristate "Userspace VESA VGA graphics support"
+	depends on FB && CONNECTOR
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	help
+	  This is the frame buffer driver for generic VBE 2.0 compliant
+	  graphic cards. It can also take advantage of VBE 3.0 features,
+	  such as refresh rate adjustment.
+
+	  This driver generally provides more features than vesafb but
+	  requires a userspace helper application called 'v86d'. See
+	  <file:Documentation/fb/uvesafb.txt> for more information.
+
+	  If unsure, say N.
+
+config FB_VESA
+	bool "VESA VGA graphics support"
+	depends on (FB = y) && X86
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BOOT_VESA_SUPPORT
+	help
+	  This is the frame buffer device driver for generic VESA 2.0
+	  compliant graphic cards. The older VESA 1.2 cards are not supported.
+	  You will get a boot time penguin logo at no additional cost. Please
+	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+
+config FB_EFI
+	bool "EFI-based Framebuffer Support"
+	depends on (FB = y) && X86 && EFI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the EFI frame buffer device driver. If the firmware on
+	  your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
+	  using the EFI framebuffer as your console.
+
+config FB_N411
+       tristate "N411 Apollo/Hecuba devkit support"
+       depends on FB && X86 && MMU
+       select FB_SYS_FILLRECT
+       select FB_SYS_COPYAREA
+       select FB_SYS_IMAGEBLIT
+       select FB_SYS_FOPS
+       select FB_DEFERRED_IO
+       select FB_HECUBA
+       help
+         This enables support for the Apollo display controller in its
+         Hecuba form using the n411 devkit.
+
+config FB_HGA
+	tristate "Hercules mono graphics support"
+	depends on FB && X86
+	help
+	  Say Y here if you have a Hercules mono graphics card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hgafb.
+
+	  As this card technology is at least 25 years old,
+	  most people will answer N here.
+
+config FB_GBE
+	bool "SGI Graphics Backend frame buffer support"
+	depends on (FB = y) && SGI_IP32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+ 	help
+	  This is the frame buffer device driver for SGI Graphics Backend.
+	  This chip is used in SGI O2 and Visual Workstation 320/540.
+
+config FB_GBE_MEM
+	int "Video memory size in MB"
+	depends on FB_GBE
+	default 4
+	help
+	  This is the amount of memory reserved for the framebuffer,
+	  which can be any value between 1MB and 8MB.
+
+config FB_SBUS
+	bool "SBUS and UPA framebuffers"
+	depends on (FB = y) && SPARC
+	help
+	  Say Y if you want support for SBUS or UPA based frame buffer device.
+
+config FB_BW2
+	bool "BWtwo support"
+	depends on (FB = y) && (SPARC && FB_SBUS)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the BWtwo frame buffer.
+
+config FB_CG3
+	bool "CGthree support"
+	depends on (FB = y) && (SPARC && FB_SBUS)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the CGthree frame buffer.
+
+config FB_CG6
+	bool "CGsix (GX,TurboGX) support"
+	depends on (FB = y) && (SPARC && FB_SBUS)
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the CGsix (GX, TurboGX)
+	  frame buffer.
+
+config FB_FFB
+	bool "Creator/Creator3D/Elite3D support"
+	depends on FB_SBUS && SPARC64
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Creator, Creator3D,
+	  and Elite3D graphics boards.
+
+config FB_TCX
+	bool "TCX (SS4/SS5 only) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the TCX 24/8bit frame
+	  buffer.
+
+config FB_CG14
+	bool "CGfourteen (SX) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the CGfourteen frame
+	  buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+	bool "P9100 (Sparcbook 3 only) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the P9100 card
+	  supported on Sparcbook 3 machines.
+
+config FB_LEO
+	bool "Leo (ZX) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the SBUS-based Sun ZX
+	  (leo) frame buffer cards.
+
+config FB_IGA
+	bool "IGA 168x display support"
+	depends on (FB = y) && SPARC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the INTERGRAPHICS 1680 and
+	  successor frame buffer cards.
+
+config FB_XVR500
+	bool "Sun XVR-500 3DLABS Wildcat support"
+	depends on (FB = y) && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-500 and similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+	  only works on sparc64 systems where the system firmware has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
+config FB_XVR2500
+	bool "Sun XVR-2500 3DLABS Wildcat support"
+	depends on (FB = y) && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-2500 and similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+	  only works on sparc64 systems where the system firmware has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
+config FB_XVR1000
+	bool "Sun XVR-1000 support"
+	depends on (FB = y) && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-1000 and similar
+	  graphics cards.  The driver only works on sparc64 systems where
+	  the system firmware has mostly initialized the card already.  It
+	  is treated as a completely dumb framebuffer device.
+
+config FB_PVR2
+	tristate "NEC PowerVR 2 display support"
+	depends on FB && SH_DREAMCAST
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Say Y here if you have a PowerVR 2 card in your box.  If you plan to
+	  run linux on your Dreamcast, you will have to say Y here.
+	  This driver may or may not work on other PowerVR 2 cards, but is
+	  totally untested.  Use at your own risk.  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pvr2fb.
+
+	  You can pass several parameters to the driver at boot time or at
+	  module load time.  The parameters look like "video=pvr2:XXX", where
+	  the meaning of XXX can be found at the end of the main source file
+	  (<file:drivers/video/pvr2fb.c>). Please see the file
+	  <file:Documentation/fb/pvr2fb.txt>.
+
+config FB_OPENCORES
+	tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
+	depends on FB && HAS_DMA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This enables support for the OpenCores VGA/LCD core.
+
+	  The OpenCores VGA/LCD core is typically used together with
+	  softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
+	  systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
+
+	  The source code and specification for the core is available at
+	  <http://opencores.org/project,vga_lcd>
+
+config FB_S1D13XXX
+	tristate "Epson S1D13XXX framebuffer support"
+	depends on FB
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Support for S1D13XXX framebuffer device family (currently only
+	  working with S1D13806). Product specs at
+	  <http://vdc.epson.com/>
+
+config FB_ATMEL
+	tristate "AT91/AT32 LCD Controller support"
+	depends on FB && HAVE_FB_ATMEL
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	help
+	  This enables support for the AT91/AT32 LCD Controller.
+
+config FB_INTSRAM
+	bool "Frame Buffer in internal SRAM"
+	depends on FB_ATMEL && ARCH_AT91SAM9261
+	help
+	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+	  to let frame buffer in external SDRAM.
+
+config FB_ATMEL_STN
+	bool "Use a STN display with AT91/AT32 LCD Controller"
+	depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
+	default n
+	help
+	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
+	  Controller. Say N if you want to connect a TFT.
+
+	  If unsure, say N.
+
+config FB_NVIDIA
+	tristate "nVidia Framebuffer Support"
+	depends on FB && PCI
+	select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BITREVERSE
+	select VGASTATE
+	help
+	  This driver supports graphics boards with the nVidia chips, TNT
+	  and newer. For very old chipsets, such as the RIVA128, then use
+	  the rivafb.
+	  Say Y if you have such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nvidiafb.
+
+config FB_NVIDIA_I2C
+       bool "Enable DDC Support"
+       depends on FB_NVIDIA
+       select FB_DDC
+       help
+	  This enables I2C support for nVidia Chipsets.  This is used
+	  only for getting EDID information from the attached display
+	  allowing for robust video mode handling and switching.
+
+	  Because fbdev-2.6 requires that drivers must be able to
+	  independently validate video mode parameters, you should say Y
+	  here.
+
+config FB_NVIDIA_DEBUG
+	bool "Lots of debug output"
+	depends on FB_NVIDIA
+	default n
+	help
+	  Say Y here if you want the nVidia driver to output all sorts
+	  of debugging information to provide to the maintainer when
+	  something goes wrong.
+
+config FB_NVIDIA_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_NVIDIA
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_RIVA
+	tristate "nVidia Riva support"
+	depends on FB && PCI
+	select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BITREVERSE
+	select VGASTATE
+	help
+	  This driver supports graphics boards with the nVidia Riva/Geforce
+	  chips.
+	  Say Y if you have such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rivafb.
+
+config FB_RIVA_I2C
+       bool "Enable DDC Support"
+       depends on FB_RIVA
+       select FB_DDC
+       help
+	  This enables I2C support for nVidia Chipsets.  This is used
+	  only for getting EDID information from the attached display
+	  allowing for robust video mode handling and switching.
+
+	  Because fbdev-2.6 requires that drivers must be able to
+	  independently validate video mode parameters, you should say Y
+	  here.
+
+config FB_RIVA_DEBUG
+	bool "Lots of debug output"
+	depends on FB_RIVA
+	default n
+	help
+	  Say Y here if you want the Riva driver to output all sorts
+	  of debugging information to provide to the maintainer when
+	  something goes wrong.
+
+config FB_RIVA_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_RIVA
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_I740
+	tristate "Intel740 support"
+	depends on FB && PCI
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	select FB_DDC
+	help
+	  This driver supports graphics cards based on Intel740 chip.
+
+config FB_I810
+	tristate "Intel 810/815 support"
+	depends on FB && PCI && X86_32 && AGP_INTEL
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	help
+	  This driver supports the on-board graphics built in to the Intel 810 
+          and 815 chipsets.  Say Y if you have and plan to use such a board.
+
+          To compile this driver as a module, choose M here: the
+	  module will be called i810fb.
+
+          For more information, please read 
+	  <file:Documentation/fb/intel810.txt>
+
+config FB_I810_GTF
+	bool "use VESA Generalized Timing Formula"
+	depends on FB_I810
+	help
+	  If you say Y, then the VESA standard, Generalized Timing Formula 
+          or GTF, will be used to calculate the required video timing values
+	  per video mode.  Since the GTF allows nondiscrete timings 
+          (nondiscrete being a range of values as opposed to discrete being a
+          set of values), you'll be able to use any combination of horizontal 
+	  and vertical resolutions, and vertical refresh rates without having
+	  to specify your own timing parameters.  This is especially useful
+	  to maximize the performance of an aging display, or if you just 
+          have a display with nonstandard dimensions. A VESA compliant 
+	  monitor is recommended, but can still work with non-compliant ones.
+	  If you need or want this, then select this option. The timings may 
+	  not be compliant with Intel's recommended values. Use at your own 
+	  risk.
+
+          If you say N, the driver will revert to discrete video timings 
+	  using a set recommended by Intel in their documentation.
+  
+          If unsure, say N.
+
+config FB_I810_I2C
+	bool "Enable DDC Support"
+	depends on FB_I810 && FB_I810_GTF
+	select FB_DDC
+	help
+
+config FB_LE80578
+	tristate "Intel LE80578 (Vermilion) support"
+	depends on FB && PCI && X86
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This driver supports the LE80578 (Vermilion Range) chipset
+
+config FB_CARILLO_RANCH
+	tristate "Intel Carillo Ranch support"
+	depends on FB_LE80578 && FB && PCI && X86
+	help
+	  This driver supports the LE80578 (Carillo Ranch) board
+
+config FB_INTEL
+	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
+	depends on FB && PCI && X86 && AGP_INTEL && EXPERT
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
+	depends on !DRM_I915
+	help
+	  This driver supports the on-board graphics built in to the Intel
+          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
+          Say Y if you have and plan to use such a board.
+
+	  To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called intelfb.
+
+	  For more information, please read <file:Documentation/fb/intelfb.txt>
+
+config FB_INTEL_DEBUG
+	bool "Intel driver Debug Messages"
+	depends on FB_INTEL
+	---help---
+	  Say Y here if you want the Intel driver to output all sorts
+	  of debugging information to provide to the maintainer when
+	  something goes wrong.
+
+config FB_INTEL_I2C
+	bool "DDC/I2C for Intel framebuffer support"
+	depends on FB_INTEL
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC/I2C support for your on-board Intel graphics.
+
+config FB_MATROX
+	tristate "Matrox acceleration"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_MACMODES if PPC_PMAC
+	---help---
+	  Say Y here if you have a Matrox Millennium, Matrox Millennium II,
+	  Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
+	  Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
+	  Matrox G400, G450 or G550 card in your box.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called matroxfb.
+
+	  You can pass several parameters to the driver at boot time or at
+	  module load time. The parameters look like "video=matroxfb:XXX", and
+	  are described in <file:Documentation/fb/matroxfb.txt>.
+
+config FB_MATROX_MILLENIUM
+	bool "Millennium I/II support"
+	depends on FB_MATROX
+	help
+	  Say Y here if you have a Matrox Millennium or Matrox Millennium II
+	  video card. If you select "Advanced lowlevel driver options" below,
+	  you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
+	  packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
+	  also use font widths different from 8.
+
+config FB_MATROX_MYSTIQUE
+	bool "Mystique support"
+	depends on FB_MATROX
+	help
+	  Say Y here if you have a Matrox Mystique or Matrox Mystique 220
+	  video card. If you select "Advanced lowlevel driver options" below,
+	  you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
+	  packed pixel and 32 bpp packed pixel. You can also use font widths
+	  different from 8.
+
+config FB_MATROX_G
+	bool "G100/G200/G400/G450/G550 support"
+	depends on FB_MATROX
+	---help---
+	  Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
+	  video card. If you select "Advanced lowlevel driver options", you
+	  should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
+	  pixel and 32 bpp packed pixel. You can also use font widths
+	  different from 8.
+
+	  If you need support for G400 secondary head, you must say Y to
+	  "Matrox I2C support" and "G400 second head support" right below.
+	  G450/G550 secondary head and digital output are supported without
+	  additional modules.
+
+	  The driver starts in monitor mode. You must use the matroxset tool 
+	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to 
+	  swap primary and secondary head outputs, or to change output mode.  
+	  Secondary head driver always start in 640x480 resolution and you 
+	  must use fbset to change it.
+
+	  Do not forget that second head supports only 16 and 32 bpp
+	  packed pixels, so it is a good idea to compile them into the kernel
+	  too. You can use only some font widths, as the driver uses generic
+	  painting procedures (the secondary head does not use acceleration
+	  engine).
+
+	  G450/G550 hardware can display TV picture only from secondary CRTC,
+	  and it performs no scaling, so picture must have 525 or 625 lines.
+
+config FB_MATROX_I2C
+	tristate "Matrox I2C support"
+	depends on FB_MATROX
+	select FB_DDC
+	---help---
+	  This drivers creates I2C buses which are needed for accessing the
+	  DDC (I2C) bus present on all Matroxes, an I2C bus which
+	  interconnects Matrox optional devices, like MGA-TVO on G200 and
+	  G400, and the secondary head DDC bus, present on G400 only.
+
+	  You can say Y or M here if you want to experiment with monitor
+	  detection code. You must say Y or M here if you want to use either
+	  second head of G400 or MGA-TVO on G200 or G400.
+
+	  If you compile it as module, it will create a module named
+	  i2c-matroxfb.
+
+config FB_MATROX_MAVEN
+	tristate "G400 second head support"
+	depends on FB_MATROX_G && FB_MATROX_I2C
+	---help---
+	  WARNING !!! This support does not work with G450 !!!
+
+	  Say Y or M here if you want to use a secondary head (meaning two
+	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
+	  head is not compatible with accelerated XFree 3.3.x SVGA servers -
+	  secondary head output is blanked while you are in X. With XFree
+	  3.9.17 preview you can use both heads if you use SVGA over fbdev or
+	  the fbdev driver on first head and the fbdev driver on second head.
+
+	  If you compile it as module, two modules are created,
+	  matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
+	  both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
+	  also load i2c-matroxfb to get it to run.
+
+	  The driver starts in monitor mode and you must use the matroxset
+	  tool (available at
+	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
+	  PAL or NTSC or to swap primary and secondary head outputs.
+	  Secondary head driver also always start in 640x480 resolution, you
+	  must use fbset to change it.
+
+	  Also do not forget that second head supports only 16 and 32 bpp
+	  packed pixels, so it is a good idea to compile them into the kernel
+	  too.  You can use only some font widths, as the driver uses generic
+	  painting procedures (the secondary head does not use acceleration
+	  engine).
+
+config FB_RADEON
+	tristate "ATI Radeon display support"
+	depends on FB && PCI
+	select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES if PPC_OF
+	help
+	  Choose this option if you want to use an ATI Radeon graphics card as
+	  a framebuffer device.  There are both PCI and AGP versions.  You
+	  don't need to choose this to run the Radeon in plain VGA mode.
+
+	  There is a product page at
+	  http://products.amd.com/en-us/GraphicCardResult.aspx
+
+config FB_RADEON_I2C
+	bool "DDC/I2C for ATI Radeon support"
+	depends on FB_RADEON
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC/I2C support for your Radeon board. 
+
+config FB_RADEON_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_RADEON
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_RADEON_DEBUG
+	bool "Lots of debug output from Radeon driver"
+	depends on FB_RADEON
+	default n
+	help
+	  Say Y here if you want the Radeon driver to output all sorts
+	  of debugging information to provide to the maintainer when
+	  something goes wrong.
+
+config FB_ATY128
+	tristate "ATI Rage128 display support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
+	select FB_MACMODES if PPC_PMAC
+	help
+	  This driver supports graphics boards with the ATI Rage128 chips.
+	  Say Y if you have such a graphics board and read
+	  <file:Documentation/fb/aty128fb.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called aty128fb.
+
+config FB_ATY128_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_ATY128
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_ATY
+	tristate "ATI Mach64 display support" if PCI || ATARI
+	depends on FB && !SPARC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BACKLIGHT if FB_ATY_BACKLIGHT
+	select FB_MACMODES if PPC
+	help
+	  This driver supports graphics boards with the ATI Mach64 chips.
+	  Say Y if you have such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atyfb.
+
+config FB_ATY_CT
+	bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
+	depends on PCI && FB_ATY
+	default y if SPARC64 && PCI
+	help
+	  Say Y here to support use of ATI's 64-bit Rage boards (or other
+	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
+	  framebuffer device.  The ATI product support page for these boards
+	  is at <http://support.ati.com/products/pc/mach64/mach64.html>.
+
+config FB_ATY_GENERIC_LCD
+	bool "Mach64 generic LCD support"
+	depends on FB_ATY_CT
+	help
+	  Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
+	  Rage XC, or Rage XL chipset.
+
+config FB_ATY_GX
+	bool "Mach64 GX support" if PCI
+	depends on FB_ATY
+	default y if ATARI
+	help
+	  Say Y here to support use of the ATI Mach64 Graphics Expression
+	  board (or other boards based on the Mach64 GX chipset) as a
+	  framebuffer device.  The ATI product support page for these boards
+	  is at
+	  <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
+
+config FB_ATY_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_ATY
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_S3
+	tristate "S3 Trio/Virge support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_SVGALIB
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	---help---
+	  Driver for graphics boards with S3 Trio / S3 Virge chip.
+
+config FB_S3_DDC
+	bool "DDC for S3 support"
+	depends on FB_S3
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC support for your S3 graphics card.
+
+config FB_SAVAGE
+	tristate "S3 Savage support"
+	depends on FB && PCI
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	help
+	  This driver supports notebooks and computers with S3 Savage PCI/AGP
+	  chips.
+
+	  Say Y if you have such a graphics card.
+
+	  To compile this driver as a module, choose M here; the module
+	  will be called savagefb.
+
+config FB_SAVAGE_I2C
+       bool "Enable DDC2 Support"
+       depends on FB_SAVAGE
+       select FB_DDC
+       help
+	  This enables I2C support for S3 Savage Chipsets.  This is used
+	  only for getting EDID information from the attached display
+	  allowing for robust video mode handling and switching.
+
+	  Because fbdev-2.6 requires that drivers must be able to
+	  independently validate video mode parameters, you should say Y
+	  here.
+
+config FB_SAVAGE_ACCEL
+       bool "Enable Console Acceleration"
+       depends on FB_SAVAGE
+       default n
+       help
+          This option will compile in console acceleration support. If
+          the resulting framebuffer console has bothersome glitches, then
+          choose N here.
+
+config FB_SIS
+	tristate "SiS/XGI display support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BOOT_VESA_SUPPORT if FB_SIS = y
+	help
+	  This is the frame buffer device driver for the SiS 300, 315, 330
+	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
+	  Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
+
+	  To compile this driver as a module, choose M here; the module
+	  will be called sisfb.
+
+config FB_SIS_300
+	bool "SiS 300 series support"
+	depends on FB_SIS
+	help
+	  Say Y here to support use of the SiS 300/305, 540, 630 and 730.
+
+config FB_SIS_315
+	bool "SiS 315/330/340 series and XGI support"
+	depends on FB_SIS
+	help
+	  Say Y here to support use of the SiS 315, 330 and 340 series
+	  (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
+	  as XGI V3XT, V5, V8 and Z7.
+
+config FB_VIA
+       tristate "VIA UniChrome (Pro) and Chrome9 display support"
+       depends on FB && PCI && X86
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       select I2C_ALGOBIT
+       select I2C
+       select GPIOLIB
+       help
+	  This is the frame buffer device driver for Graphics chips of VIA
+	  UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
+	  CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
+ 	  /P4M900,VX800)
+	  Say Y if you have a VIA UniChrome graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called viafb.
+
+if FB_VIA
+
+config FB_VIA_DIRECT_PROCFS
+	bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
+	depends on FB_VIA
+	default n
+	help
+	  Allow direct hardware access to some output registers via procfs.
+	  This is dangerous but may provide the only chance to get the
+	  correct output device configuration.
+	  Its use is strongly discouraged.
+
+config FB_VIA_X_COMPATIBILITY
+	bool "X server compatibility"
+	depends on FB_VIA
+	default n
+	help
+	  This option reduces the functionality (power saving, ...) of the
+	  framebuffer to avoid negative impact on the OpenChrome X server.
+	  If you use any X server other than fbdev you should enable this
+	  otherwise it should be safe to disable it and allow using all
+	  features.
+
+endif
+
+config FB_NEOMAGIC
+	tristate "NeoMagic display support"
+	depends on FB && PCI
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	help
+	  This driver supports notebooks with NeoMagic PCI chips.
+	  Say Y if you have such a graphics card. 
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called neofb.
+
+config FB_KYRO
+	tristate "IMG Kyro support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
+	  graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kyrofb.
+
+config FB_3DFX
+	tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
+	depends on FB && PCI
+	select FB_CFB_IMAGEBLIT
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_MODE_HELPERS
+	help
+	  This driver supports graphics boards with the 3Dfx Banshee,
+	  Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
+	  such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tdfxfb.
+
+config FB_3DFX_ACCEL
+	bool "3Dfx Acceleration functions"
+	depends on FB_3DFX
+	---help---
+	This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
+	device driver with acceleration functions.
+
+config FB_3DFX_I2C
+	bool "Enable DDC/I2C support"
+	depends on FB_3DFX
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
+
+config FB_VOODOO1
+	tristate "3Dfx Voodoo Graphics (sst1) support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or 
+	  Voodoo2 (cvg) based graphics card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sstfb.
+
+	  WARNING: Do not use any application that uses the 3D engine
+	  (namely glide) while using this driver.
+	  Please read the <file:Documentation/fb/sstfb.txt> for supported
+	  options and other important info  support.
+
+config FB_VT8623
+	tristate "VIA VT8623 support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_SVGALIB
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	---help---
+	  Driver for CastleRock integrated graphics core in the
+	  VIA VT8623 [Apollo CLE266] chipset.
+
+config FB_TRIDENT
+	tristate "Trident/CyberXXX/CyberBlade support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  This is the frame buffer device driver for Trident PCI/AGP chipsets.
+	  Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
+	  and Blade XP.
+	  There are also integrated versions of these chips called CyberXXXX,
+	  CyberImage or CyberBlade. These chips are mostly found in laptops
+	  but also on some motherboards including early VIA EPIA motherboards.
+	  For more information, read <file:Documentation/fb/tridentfb.txt>
+
+	  Say Y if you have such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tridentfb.
+
+config FB_ARK
+	tristate "ARK 2000PV support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_SVGALIB
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	---help---
+	  Driver for PCI graphics boards with ARK 2000PV chip
+	  and ICS 5342 RAMDAC.
+
+config FB_PM3
+	tristate "Permedia3 support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the 3DLabs Permedia3
+	  chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
+	  similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
+	  and maybe other boards.
+
+config FB_CARMINE
+	tristate "Fujitsu carmine frame buffer support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Fujitsu Carmine chip.
+	  The driver provides two independent frame buffer devices.
+
+choice
+	depends on FB_CARMINE
+	prompt "DRAM timing"
+	default FB_CARMINE_DRAM_EVAL
+
+config FB_CARMINE_DRAM_EVAL
+	bool "Eval board timings"
+	help
+	  Use timings which work on the eval card.
+
+config CARMINE_DRAM_CUSTOM
+	bool "Custom board timings"
+	help
+	  Use custom board timings.
+endchoice
+
+config FB_AU1100
+	bool "Au1100 LCD Driver"
+	depends on (FB = y) && MIPS_ALCHEMY
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer driver for the AMD Au1100 SOC.  It can drive
+	  various panels and CRTs by passing in kernel cmd line option
+	  au1100fb:panel=<name>.
+
+config FB_AU1200
+	bool "Au1200/Au1300 LCD Driver"
+	depends on (FB = y) && MIPS_ALCHEMY
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	help
+	  This is the framebuffer driver for the Au1200/Au1300 SOCs.
+	  It can drive various panels and CRTs by passing in kernel cmd line
+	  option au1200fb:panel=<name>.
+
+config FB_VT8500
+	bool "VIA VT8500 framebuffer support"
+	depends on (FB = y) && ARM && ARCH_VT8500
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
+	select FB_SYS_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	help
+	  This is the framebuffer driver for VIA VT8500 integrated LCD
+	  controller.
+
+config FB_WM8505
+	bool "Wondermedia WM8xxx-series frame buffer support"
+	depends on (FB = y) && ARM && ARCH_VT8500
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
+	select FB_SYS_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	help
+	  This is the framebuffer driver for WonderMedia WM8xxx-series
+	  integrated LCD controller. This driver covers the WM8505, WM8650
+	  and WM8850 SoCs.
+
+config FB_WMT_GE_ROPS
+	bool "VT8500/WM8xxx accelerated raster ops support"
+	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
+	default n
+	help
+	  This adds support for accelerated raster operations on the
+	  VIA VT8500 and Wondermedia 85xx series SoCs.
+
+source "drivers/video/fbdev/geode/Kconfig"
+
+config FB_HIT
+	tristate "HD64461 Frame Buffer support"
+	depends on FB && HD64461
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Hitachi HD64461 LCD
+	  frame buffer card.
+
+config FB_PMAG_AA
+	bool "PMAG-AA TURBOchannel framebuffer support"
+	depends on (FB = y) && TC
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
+	  used mainly in the MIPS-based DECstation series.
+
+config FB_PMAG_BA
+	tristate "PMAG-BA TURBOchannel framebuffer support"
+	depends on FB && TC
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
+	  used mainly in the MIPS-based DECstation series.
+
+config FB_PMAGB_B
+	tristate "PMAGB-B TURBOchannel framebuffer support"
+	depends on FB && TC
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
+	  in the MIPS-based DECstation series. The card is currently only
+	  supported in 1280x1024x8 mode.
+
+config FB_MAXINE
+	bool "Maxine (Personal DECstation) onboard framebuffer support"
+	depends on (FB = y) && MACH_DECSTATION
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Support for the onboard framebuffer (1024x768x8) in the Personal
+	  DECstation series (Personal DECstation 5000/20, /25, /33, /50,
+	  Codename "Maxine").
+
+config FB_G364
+	bool "G364 frame buffer support"
+	depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  The G364 driver is the framebuffer used in MIPS Magnum 4000 and
+	  Olivetti M700-10 systems.
+
+config FB_68328
+	bool "Motorola 68328 native frame buffer support"
+	depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y here if you want to support the built-in frame buffer of
+	  the Motorola 68328 CPU family.
+
+config FB_PXA168
+	tristate "PXA168/910 LCD framebuffer support"
+	depends on FB && (CPU_PXA168 || CPU_PXA910)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Marvell
+	  MMP processor.
+
+config FB_PXA
+	tristate "PXA LCD framebuffer support"
+	depends on FB && ARCH_PXA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Intel
+	  PXA2x0 processor.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called pxafb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+
+config FB_PXA_OVERLAY
+	bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
+	default n
+	depends on FB_PXA && (PXA27x || PXA3xx)
+
+config FB_PXA_SMARTPANEL
+	bool "PXA Smartpanel LCD support"
+	default n
+	depends on FB_PXA
+
+config FB_PXA_PARAMETERS
+	bool "PXA LCD command line parameters"
+	default n
+	depends on FB_PXA
+	---help---
+	  Enable the use of kernel command line or module parameters
+	  to configure the physical properties of the LCD panel when
+	  using the PXA LCD driver.
+
+	  This option allows you to override the panel parameters
+	  supplied by the platform in order to support multiple
+	  different models of flatpanel. If you will only be using a
+	  single model of flatpanel then you can safely leave this
+	  option disabled.
+
+	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
+
+config PXA3XX_GCU
+	tristate "PXA3xx 2D graphics accelerator driver"
+	depends on FB_PXA
+	help
+	  Kernelspace driver for the 2D graphics controller unit (GCU)
+	  found on PXA3xx processors. There is a counterpart driver in the
+	  DirectFB suite, see http://www.directfb.org/
+
+	  If you compile this as a module, it will be called pxa3xx_gcu.
+
+config FB_MBX
+	tristate "2700G LCD framebuffer support"
+	depends on FB && ARCH_PXA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Framebuffer driver for the Intel 2700G (Marathon) Graphics
+	  Accelerator
+
+config FB_MBX_DEBUG
+       bool "Enable debugging info via debugfs"
+       depends on FB_MBX && DEBUG_FS
+       default n
+       ---help---
+         Enable this if you want debugging information using the debug
+         filesystem (debugfs)
+
+         If unsure, say N.
+
+config FB_FSL_DIU
+	tristate "Freescale DIU framebuffer support"
+	depends on FB && FSL_SOC
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select PPC_LIB_RHEAP
+	---help---
+	  Framebuffer driver for the Freescale SoC DIU
+
+config FB_W100
+	tristate "W100 frame buffer support"
+	depends on FB && ARCH_PXA
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+	  It can also drive the w3220 chip found on iPAQ hx4700.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called w100fb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+
+config FB_SH_MOBILE_LCDC
+	tristate "SuperH Mobile LCDC framebuffer support"
+	depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	select FB_BACKLIGHT
+	select SH_MIPI_DSI if SH_LCD_MIPI_DSI
+	---help---
+	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
+
+config FB_SH_MOBILE_HDMI
+	tristate "SuperH Mobile HDMI controller support"
+	depends on FB_SH_MOBILE_LCDC
+	select FB_MODE_HELPERS
+	select SOUND
+	select SND
+	select SND_SOC
+	---help---
+	  Driver for the on-chip SH-Mobile HDMI controller.
+
+config FB_TMIO
+	tristate "Toshiba Mobile IO FrameBuffer support"
+	depends on FB && MFD_CORE
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the Toshiba Mobile IO integrated as found
+	  on the Sharp SL-6000 series
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called tmiofb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+
+config FB_TMIO_ACCELL
+	bool "tmiofb acceleration"
+	depends on FB_TMIO
+	default y
+
+config FB_S3C
+	tristate "Samsung S3C framebuffer support"
+	depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \
+		ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in FB controller in the Samsung
+	  SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
+	  and the S3C64XX series such as the S3C6400 and S3C6410.
+
+	  These chips all have the same basic framebuffer design with the
+	  actual capabilities depending on the chip. For instance the S3C6400
+	  and S3C6410 support 4 hardware windows whereas the S3C24XX series
+	  currently only have two.
+
+	  Currently the support is only for the S3C6400 and S3C6410 SoCs.
+
+config FB_S3C_DEBUG_REGWRITE
+       bool "Debug register writes"
+       depends on FB_S3C
+       ---help---
+         Show all register writes via pr_debug()
+
+config FB_S3C2410
+	tristate "S3C2410 LCD framebuffer support"
+	depends on FB && ARCH_S3C24XX
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Samsung
+	  S3C2410 processor.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called s3c2410fb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+config FB_S3C2410_DEBUG
+	bool "S3C2410 lcd debug messages"
+	depends on FB_S3C2410
+	help
+	  Turn on debugging messages. Note that you can set/unset at run time
+	  through sysfs
+
+config FB_NUC900
+        bool "NUC900 LCD framebuffer support"
+        depends on FB && ARCH_W90X900
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        ---help---
+          Frame buffer driver for the built-in LCD controller in the Nuvoton
+          NUC900 processor
+
+config GPM1040A0_320X240
+        bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
+        depends on FB_NUC900
+
+config FB_SM501
+	tristate "Silicon Motion SM501 framebuffer support"
+	depends on FB && MFD_SM501
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the CRT and LCD controllers in the Silicon
+	  Motion SM501.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called sm501fb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+
+config FB_SMSCUFX
+	tristate "SMSC UFX6000/7000 USB Framebuffer support"
+	depends on FB && USB
+	select FB_MODE_HELPERS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	---help---
+	  This is a kernel framebuffer driver for SMSC UFX USB devices.
+	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+	  mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
+	  (USB 3.0) devices.
+	  To compile as a module, choose M here: the module name is smscufx.
+
+config FB_UDL
+	tristate "Displaylink USB Framebuffer support"
+	depends on FB && USB
+	select FB_MODE_HELPERS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	---help---
+	  This is a kernel framebuffer driver for DisplayLink USB devices.
+	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
+	  To compile as a module, choose M here: the module name is udlfb.
+
+config FB_IBM_GXT4500
+	tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
+	depends on FB && PPC
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Say Y here to enable support for the IBM GXT4000P/6000P and
+	  GXT4500P/6500P display adaptor based on Raster Engine RC1000,
+	  found on some IBM System P (pSeries) machines. This driver
+	  doesn't use Geometry Engine GT1000.
+
+config FB_PS3
+	tristate "PS3 GPU framebuffer driver"
+	depends on FB && PS3_PS3AV
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
+	---help---
+	  Include support for the virtual frame buffer in the PS3 platform.
+
+config FB_PS3_DEFAULT_SIZE_M
+	int "PS3 default frame buffer size (in MiB)"
+	depends on FB_PS3
+	default 9
+	---help---
+	  This is the default size (in MiB) of the virtual frame buffer in
+	  the PS3.
+	  The default value can be overridden on the kernel command line
+	  using the "ps3fb" option (e.g. "ps3fb=9M");
+
+config FB_XILINX
+	tristate "Xilinx frame buffer support"
+	depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Include support for the Xilinx ML300/ML403 reference design
+	  framebuffer. ML300 carries a 640*480 LCD display on the board,
+	  ML403 uses a standard DB15 VGA connector.
+
+config FB_GOLDFISH
+	tristate "Goldfish Framebuffer"
+	depends on FB && HAS_DMA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Framebuffer driver for Goldfish Virtual Platform
+
+config FB_COBALT
+	tristate "Cobalt server LCD frame buffer support"
+	depends on FB && (MIPS_COBALT || MIPS_SEAD3)
+
+config FB_SH7760
+	bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
+	depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
+		|| CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Support for the SH7760/SH7763/SH7720/SH7721 integrated
+	  (D)STN/TFT LCD Controller.
+	  Supports display resolutions up to 1024x1024 pixel, grayscale and
+	  color operation, with depths ranging from 1 bpp to 8 bpp monochrome
+	  and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
+	  panels <= 320 pixel horizontal resolution.
+
+config FB_DA8XX
+	tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
+	depends on FB && (ARCH_DAVINCI_DA8XX || SOC_AM33XX)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_CFB_REV_PIXELS_IN_BYTE
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	---help---
+	  This is the frame buffer device driver for the TI LCD controller
+	  found on DA8xx/OMAP-L1xx/AM335x SoCs.
+	  If unsure, say N.
+
+config FB_VIRTUAL
+	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	---help---
+	  This is a `virtual' frame buffer device. It operates on a chunk of
+	  unswappable kernel memory instead of on the memory of a graphics
+	  board. This means you cannot see any output sent to this frame
+	  buffer device, while it does consume precious memory. The main use
+	  of this frame buffer device is testing and debugging the frame
+	  buffer subsystem. Do NOT enable it for normal systems! To protect
+	  the innocent, it has to be enabled explicitly at boot time using the
+	  kernel option `video=vfb:'.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vfb. In order to load it, you must use
+	  the vfb_enable=1 option.
+
+	  If unsure, say N.
+
+config XEN_FBDEV_FRONTEND
+	tristate "Xen virtual frame buffer support"
+	depends on FB && XEN
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	select INPUT_XEN_KBDDEV_FRONTEND if INPUT_MISC
+	select XEN_XENBUS_FRONTEND
+	default y
+	help
+	  This driver implements the front-end of the Xen virtual
+	  frame buffer driver.  It communicates with a back-end
+	  in another domain.
+
+config FB_METRONOME
+	tristate "E-Ink Metronome/8track controller support"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	help
+	  This driver implements support for the E-Ink Metronome
+	  controller. The pre-release name for this device was 8track
+	  and could also have been called by some vendors as PVI-nnnn.
+
+config FB_MB862XX
+	tristate "Fujitsu MB862xx GDC support"
+	depends on FB
+	depends on PCI || (OF && PPC)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
+
+choice
+	prompt "GDC variant"
+	depends on FB_MB862XX
+
+config FB_MB862XX_PCI_GDC
+	bool "Carmine/Coral-P(A) GDC"
+	depends on PCI
+	---help---
+	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
+	  PCI graphics controller devices.
+
+config FB_MB862XX_LIME
+	bool "Lime GDC"
+	depends on OF && PPC
+	select FB_FOREIGN_ENDIAN
+	select FB_LITTLE_ENDIAN
+	---help---
+	  Framebuffer support for Fujitsu Lime GDC on host CPU bus.
+
+endchoice
+
+config FB_MB862XX_I2C
+	bool "Support I2C bus on MB862XX GDC"
+	depends on FB_MB862XX && I2C
+	default y
+	help
+	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
+	  driver to support accessing I2C devices on controller's I2C bus.
+	  These are usually some video decoder chips.
+
+config FB_EP93XX
+	tristate "EP93XX frame buffer support"
+	depends on FB && ARCH_EP93XX
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Framebuffer driver for the Cirrus Logic EP93XX series of processors.
+	  This driver is also available as a module. The module will be called
+	  ep93xx-fb.
+
+config FB_PRE_INIT_FB
+	bool "Don't reinitialize, use bootloader's GDC/Display configuration"
+	depends on FB && FB_MB862XX_LIME
+	---help---
+	  Select this option if display contents should be inherited as set by
+	  the bootloader.
+
+config FB_MSM
+	tristate "MSM Framebuffer support"
+	depends on FB && ARCH_MSM
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+
+config FB_MX3
+	tristate "MX3 Framebuffer support"
+	depends on FB && MX3_IPU
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	default y
+	help
+	  This is a framebuffer device for the i.MX31 LCD Controller. So
+	  far only synchronous displays are supported. If you plan to use
+	  an LCD display with your i.MX31 system, say Y here.
+
+config FB_BROADSHEET
+	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	help
+	  This driver implements support for the E-Ink Broadsheet
+	  controller. The release name for this device was Epson S1D13521
+	  and could also have been called by other names when coupled with
+	  a bridge adapter.
+
+config FB_AUO_K190X
+	tristate "AUO-K190X EPD controller support"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	help
+	  Provides support for epaper controllers from the K190X series
+	  of AUO. These controllers can be used to drive epaper displays
+	  from Sipix.
+
+	  This option enables the common support, shared by the individual
+	  controller drivers. You will also have to enable the driver
+	  for the controller type used in your device.
+
+config FB_AUO_K1900
+	tristate "AUO-K1900 EPD controller support"
+	depends on FB && FB_AUO_K190X
+	help
+	  This driver implements support for the AUO K1900 epd-controller.
+	  This controller can drive Sipix epaper displays but can only do
+	  serial updates, reducing the number of possible frames per second.
+
+config FB_AUO_K1901
+	tristate "AUO-K1901 EPD controller support"
+	depends on FB && FB_AUO_K190X
+	help
+	  This driver implements support for the AUO K1901 epd-controller.
+	  This controller can drive Sipix epaper displays and supports
+	  concurrent updates, making higher frames per second possible.
+
+config FB_JZ4740
+	tristate "JZ4740 LCD framebuffer support"
+	depends on FB && MACH_JZ4740
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	help
+	  Framebuffer support for the JZ4740 SoC.
+
+config FB_MXS
+	tristate "MXS LCD framebuffer support"
+	depends on FB && ARCH_MXS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	help
+	  Framebuffer support for the MXS SoC.
+
+config FB_PUV3_UNIGFX
+	tristate "PKUnity v3 Unigfx framebuffer support"
+	depends on FB && UNICORE32 && ARCH_PUV3
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	help
+	  Choose this option if you want to use the Unigfx device as a
+	  framebuffer device. Without the support of PCI & AGP.
+
+config FB_HYPERV
+	tristate "Microsoft Hyper-V Synthetic Video support"
+	depends on FB && HYPERV
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
+
+config FB_SIMPLE
+	bool "Simple framebuffer support"
+	depends on (FB = y)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y if you want support for a simple frame-buffer.
+
+	  This driver assumes that the display hardware has been initialized
+	  before the kernel boots, and the kernel will simply render to the
+	  pre-allocated frame buffer surface.
+
+	  Configuration re: surface address, size, and format must be provided
+	  through device tree, or plain old platform data.
+
+source "drivers/video/fbdev/omap/Kconfig"
+source "drivers/video/fbdev/omap2/Kconfig"
+source "drivers/video/fbdev/exynos/Kconfig"
+source "drivers/video/fbdev/mmp/Kconfig"
+
+config FB_SH_MOBILE_MERAM
+	tristate "SuperH Mobile MERAM read ahead support"
+	depends on (SUPERH || ARCH_SHMOBILE)
+	select GENERIC_ALLOCATOR
+	---help---
+	  Enable MERAM support for the SuperH controller.
+
+	  This will allow for caching of the framebuffer to provide more
+	  reliable access under heavy main memory bus traffic situations.
+	  Up to 4 memory channels can be configured, allowing 4 RGB or
+	  2 YCbCr framebuffers to be configured.
+
+config FB_SSD1307
+	tristate "Solomon SSD1307 framebuffer support"
+	depends on FB && I2C
+	depends on OF
+	depends on GPIOLIB
+	select FB_SYS_FOPS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_DEFERRED_IO
+	select PWM
+	help
+	  This driver implements support for the Solomon SSD1307
+	  OLED controller over I2C.
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
new file mode 100644
index 000000000000..0284f2a12538
--- /dev/null
+++ b/drivers/video/fbdev/Makefile
@@ -0,0 +1,152 @@
+# Makefile for the Linux video drivers.
+# 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
+# Rewritten to use lists instead of if-statements.
+
+# Each configuration option enables a list of files.
+
+obj-y				+= core/
+
+obj-$(CONFIG_EXYNOS_VIDEO)     += exynos/
+
+obj-$(CONFIG_FB_MACMODES)      += macmodes.o
+obj-$(CONFIG_FB_WMT_GE_ROPS)   += wmt_ge_rops.o
+
+# Hardware specific drivers go first
+obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p_planar.o
+obj-$(CONFIG_FB_ARC)              += arcfb.o
+obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
+obj-$(CONFIG_FB_CYBER2000)        += cyber2000fb.o
+obj-$(CONFIG_FB_GRVGA)            += grvga.o
+obj-$(CONFIG_FB_PM2)              += pm2fb.o
+obj-$(CONFIG_FB_PM3)		  += pm3fb.o
+
+obj-$(CONFIG_FB_I740)		  += i740fb.o
+obj-$(CONFIG_FB_MATROX)		  += matrox/
+obj-$(CONFIG_FB_RIVA)		  += riva/
+obj-$(CONFIG_FB_NVIDIA)		  += nvidia/
+obj-$(CONFIG_FB_ATY)		  += aty/ macmodes.o
+obj-$(CONFIG_FB_ATY128)		  += aty/ macmodes.o
+obj-$(CONFIG_FB_RADEON)		  += aty/
+obj-$(CONFIG_FB_SIS)		  += sis/
+obj-$(CONFIG_FB_VIA)		  += via/
+obj-$(CONFIG_FB_KYRO)             += kyro/
+obj-$(CONFIG_FB_SAVAGE)		  += savage/
+obj-$(CONFIG_FB_GEODE)		  += geode/
+obj-$(CONFIG_FB_MBX)		  += mbx/
+obj-$(CONFIG_FB_NEOMAGIC)         += neofb.o
+obj-$(CONFIG_FB_3DFX)             += tdfxfb.o
+obj-$(CONFIG_FB_CONTROL)          += controlfb.o
+obj-$(CONFIG_FB_PLATINUM)         += platinumfb.o
+obj-$(CONFIG_FB_VALKYRIE)         += valkyriefb.o
+obj-$(CONFIG_FB_CT65550)          += chipsfb.o
+obj-$(CONFIG_FB_IMSTT)            += imsttfb.o
+obj-$(CONFIG_FB_FM2)              += fm2fb.o
+obj-$(CONFIG_FB_VT8623)           += vt8623fb.o
+obj-$(CONFIG_FB_TRIDENT)          += tridentfb.o
+obj-$(CONFIG_FB_LE80578)          += vermilion/
+obj-$(CONFIG_FB_S3)               += s3fb.o
+obj-$(CONFIG_FB_ARK)              += arkfb.o
+obj-$(CONFIG_FB_STI)              += stifb.o
+obj-$(CONFIG_FB_FFB)              += ffb.o sbuslib.o
+obj-$(CONFIG_FB_CG6)              += cg6.o sbuslib.o
+obj-$(CONFIG_FB_CG3)              += cg3.o sbuslib.o
+obj-$(CONFIG_FB_BW2)              += bw2.o sbuslib.o
+obj-$(CONFIG_FB_CG14)             += cg14.o sbuslib.o
+obj-$(CONFIG_FB_P9100)            += p9100.o sbuslib.o
+obj-$(CONFIG_FB_TCX)              += tcx.o sbuslib.o
+obj-$(CONFIG_FB_LEO)              += leo.o sbuslib.o
+obj-$(CONFIG_FB_ACORN)            += acornfb.o
+obj-$(CONFIG_FB_ATARI)            += atafb.o c2p_iplan2.o atafb_mfb.o \
+                                     atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
+obj-$(CONFIG_FB_MAC)              += macfb.o
+obj-$(CONFIG_FB_HECUBA)           += hecubafb.o
+obj-$(CONFIG_FB_N411)             += n411.o
+obj-$(CONFIG_FB_HGA)              += hgafb.o
+obj-$(CONFIG_FB_XVR500)           += sunxvr500.o
+obj-$(CONFIG_FB_XVR2500)          += sunxvr2500.o
+obj-$(CONFIG_FB_XVR1000)          += sunxvr1000.o
+obj-$(CONFIG_FB_IGA)              += igafb.o
+obj-$(CONFIG_FB_APOLLO)           += dnfb.o
+obj-$(CONFIG_FB_Q40)              += q40fb.o
+obj-$(CONFIG_FB_TGA)              += tgafb.o
+obj-$(CONFIG_FB_HP300)            += hpfb.o
+obj-$(CONFIG_FB_G364)             += g364fb.o
+obj-$(CONFIG_FB_EP93XX)		  += ep93xx-fb.o
+obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
+obj-$(CONFIG_FB_HIT)              += hitfb.o
+obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
+obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
+obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
+obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
+obj-$(CONFIG_FB_GOLDFISH)         += goldfishfb.o
+obj-$(CONFIG_FB_68328)            += 68328fb.o
+obj-$(CONFIG_FB_GBE)              += gbefb.o
+obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
+obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
+obj-$(CONFIG_FB_PXA)		  += pxafb.o
+obj-$(CONFIG_FB_PXA168)		  += pxa168fb.o
+obj-$(CONFIG_PXA3XX_GCU)	  += pxa3xx-gcu.o
+obj-$(CONFIG_MMP_DISP)           += mmp/
+obj-$(CONFIG_FB_W100)		  += w100fb.o
+obj-$(CONFIG_FB_TMIO)		  += tmiofb.o
+obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
+obj-$(CONFIG_FB_AU1200)		  += au1200fb.o
+obj-$(CONFIG_FB_VT8500)		  += vt8500lcdfb.o
+obj-$(CONFIG_FB_WM8505)		  += wm8505fb.o
+obj-$(CONFIG_FB_PMAG_AA)	  += pmag-aa-fb.o
+obj-$(CONFIG_FB_PMAG_BA)	  += pmag-ba-fb.o
+obj-$(CONFIG_FB_PMAGB_B)	  += pmagb-b-fb.o
+obj-$(CONFIG_FB_MAXINE)		  += maxinefb.o
+obj-$(CONFIG_FB_METRONOME)        += metronomefb.o
+obj-$(CONFIG_FB_BROADSHEET)       += broadsheetfb.o
+obj-$(CONFIG_FB_AUO_K190X)	  += auo_k190x.o
+obj-$(CONFIG_FB_AUO_K1900)	  += auo_k1900fb.o
+obj-$(CONFIG_FB_AUO_K1901)	  += auo_k1901fb.o
+obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
+obj-$(CONFIG_FB_SH7760)		  += sh7760fb.o
+obj-$(CONFIG_FB_IMX)              += imxfb.o
+obj-$(CONFIG_FB_S3C)		  += s3c-fb.o
+obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
+obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
+obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
+obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
+obj-$(CONFIG_FB_PS3)		  += ps3fb.o
+obj-$(CONFIG_FB_SM501)            += sm501fb.o
+obj-$(CONFIG_FB_UDL)		  += udlfb.o
+obj-$(CONFIG_FB_SMSCUFX)	  += smscufx.o
+obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
+obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
+obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o
+obj-$(CONFIG_FB_SH_MOBILE_MERAM)  += sh_mobile_meram.o
+obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
+obj-$(CONFIG_FB_OMAP)             += omap/
+obj-y                             += omap2/
+obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
+obj-$(CONFIG_FB_CARMINE)          += carminefb.o
+obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
+obj-$(CONFIG_FB_MSM)              += msm/
+obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
+obj-$(CONFIG_FB_JZ4740)		  += jz4740_fb.o
+obj-$(CONFIG_FB_PUV3_UNIGFX)      += fb-puv3.o
+obj-$(CONFIG_FB_HYPERV)		  += hyperv_fb.o
+obj-$(CONFIG_FB_OPENCORES)	  += ocfb.o
+
+# Platform or fallback drivers go here
+obj-$(CONFIG_FB_UVESA)            += uvesafb.o
+obj-$(CONFIG_FB_VESA)             += vesafb.o
+obj-$(CONFIG_FB_EFI)              += efifb.o
+obj-$(CONFIG_FB_VGA16)            += vga16fb.o
+obj-$(CONFIG_FB_OF)               += offb.o
+obj-$(CONFIG_FB_BF537_LQ035)      += bf537-lq035.o
+obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
+obj-$(CONFIG_FB_BFIN_LQ035Q1)     += bfin-lq035q1-fb.o
+obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_BFIN_7393)        += bfin_adv7393fb.o
+obj-$(CONFIG_FB_MX3)		  += mx3fb.o
+obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
+obj-$(CONFIG_FB_MXS)		  += mxsfb.o
+obj-$(CONFIG_FB_SSD1307)	  += ssd1307fb.o
+obj-$(CONFIG_FB_SIMPLE)           += simplefb.o
+
+# the test framebuffer is last
+obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
diff --git a/drivers/video/acornfb.c b/drivers/video/fbdev/acornfb.c
index a305caea58ee..a305caea58ee 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/fbdev/acornfb.c
diff --git a/drivers/video/acornfb.h b/drivers/video/fbdev/acornfb.h
index 175c8ff3367c..175c8ff3367c 100644
--- a/drivers/video/acornfb.h
+++ b/drivers/video/fbdev/acornfb.h
diff --git a/drivers/video/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
index 14d6b3793e0a..14d6b3793e0a 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/fbdev/amba-clcd.c
diff --git a/drivers/video/amifb.c b/drivers/video/fbdev/amifb.c
index 518f790ef88a..518f790ef88a 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/fbdev/amifb.c
diff --git a/drivers/video/arcfb.c b/drivers/video/fbdev/arcfb.c
index 1b0b233b8b39..1b0b233b8b39 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/fbdev/arcfb.c
diff --git a/drivers/video/arkfb.c b/drivers/video/fbdev/arkfb.c
index adc4ea2cc5a0..adc4ea2cc5a0 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/fbdev/arkfb.c
diff --git a/drivers/video/asiliantfb.c b/drivers/video/fbdev/asiliantfb.c
index 7e8ddf00ccc2..7e8ddf00ccc2 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/fbdev/asiliantfb.c
diff --git a/drivers/video/atafb.c b/drivers/video/fbdev/atafb.c
index e21d1f58554c..e21d1f58554c 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/fbdev/atafb.c
diff --git a/drivers/video/atafb.h b/drivers/video/fbdev/atafb.h
index 014e05906cb1..014e05906cb1 100644
--- a/drivers/video/atafb.h
+++ b/drivers/video/fbdev/atafb.h
diff --git a/drivers/video/atafb_iplan2p2.c b/drivers/video/fbdev/atafb_iplan2p2.c
index 8cc9c50379d0..8cc9c50379d0 100644
--- a/drivers/video/atafb_iplan2p2.c
+++ b/drivers/video/fbdev/atafb_iplan2p2.c
diff --git a/drivers/video/atafb_iplan2p4.c b/drivers/video/fbdev/atafb_iplan2p4.c
index bee0d89463f7..bee0d89463f7 100644
--- a/drivers/video/atafb_iplan2p4.c
+++ b/drivers/video/fbdev/atafb_iplan2p4.c
diff --git a/drivers/video/atafb_iplan2p8.c b/drivers/video/fbdev/atafb_iplan2p8.c
index 356fb52ce443..356fb52ce443 100644
--- a/drivers/video/atafb_iplan2p8.c
+++ b/drivers/video/fbdev/atafb_iplan2p8.c
diff --git a/drivers/video/atafb_mfb.c b/drivers/video/fbdev/atafb_mfb.c
index 6a352d62eecf..6a352d62eecf 100644
--- a/drivers/video/atafb_mfb.c
+++ b/drivers/video/fbdev/atafb_mfb.c
diff --git a/drivers/video/atafb_utils.h b/drivers/video/fbdev/atafb_utils.h
index ac9e19dc5057..ac9e19dc5057 100644
--- a/drivers/video/atafb_utils.h
+++ b/drivers/video/fbdev/atafb_utils.h
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
index cd961622f9c1..e683b6ef9594 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -1190,12 +1190,12 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 	if (!sinfo->config)
 		goto free_info;
 
-	strcpy(info->fix.id, sinfo->pdev->name);
 	info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
 	info->pseudo_palette = sinfo->pseudo_palette;
 	info->fbops = &atmel_lcdfb_ops;
 
 	info->fix = atmel_lcdfb_fix;
+	strcpy(info->fix.id, sinfo->pdev->name);
 
 	/* Enable LCDC Clocks */
 	sinfo->bus_clk = clk_get(dev, "hclk");
@@ -1298,6 +1298,12 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 		goto unregister_irqs;
 	}
 
+	ret = atmel_lcdfb_set_par(info);
+	if (ret < 0) {
+		dev_err(dev, "set par failed: %d\n", ret);
+		goto unregister_irqs;
+	}
+
 	dev_set_drvdata(dev, info);
 
 	/*
diff --git a/drivers/video/aty/Makefile b/drivers/video/fbdev/aty/Makefile
index a6cc0e9ec790..a6cc0e9ec790 100644
--- a/drivers/video/aty/Makefile
+++ b/drivers/video/fbdev/aty/Makefile
diff --git a/drivers/video/aty/ati_ids.h b/drivers/video/fbdev/aty/ati_ids.h
index 3e9d28bcd9f8..3e9d28bcd9f8 100644
--- a/drivers/video/aty/ati_ids.h
+++ b/drivers/video/fbdev/aty/ati_ids.h
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c
index 52108be69e77..52108be69e77 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/fbdev/aty/aty128fb.c
diff --git a/drivers/video/aty/atyfb.h b/drivers/video/fbdev/aty/atyfb.h
index 1f39a62f899b..1f39a62f899b 100644
--- a/drivers/video/aty/atyfb.h
+++ b/drivers/video/fbdev/aty/atyfb.h
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
index 28fafbf864a5..c3d0074a32db 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/fbdev/aty/atyfb_base.c
@@ -862,8 +862,8 @@ static int aty_var_to_crtc(const struct fb_info *info,
 	h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
 	v_sync_pol = sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1;
 
-	if ((xres > 1600) || (yres > 1200)) {
-		FAIL("MACH64 chips are designed for max 1600x1200\n"
+	if ((xres > 1920) || (yres > 1200)) {
+		FAIL("MACH64 chips are designed for max 1920x1200\n"
 		     "select another resolution.");
 	}
 	h_sync_strt = h_disp + var->right_margin;
@@ -2653,7 +2653,8 @@ static int aty_init(struct fb_info *info)
 		      FBINFO_HWACCEL_IMAGEBLIT |
 		      FBINFO_HWACCEL_FILLRECT  |
 		      FBINFO_HWACCEL_COPYAREA  |
-		      FBINFO_HWACCEL_YPAN;
+		      FBINFO_HWACCEL_YPAN      |
+		      FBINFO_READS_FAST;
 
 #ifdef CONFIG_PMAC_BACKLIGHT
 	if (M64_HAS(G3_PB_1_1) && of_machine_is_compatible("PowerBook1,1")) {
diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/fbdev/aty/mach64_accel.c
index e45833ce975b..182bd680141f 100644
--- a/drivers/video/aty/mach64_accel.c
+++ b/drivers/video/fbdev/aty/mach64_accel.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/delay.h>
+#include <asm/unaligned.h>
 #include <linux/fb.h>
 #include <video/mach64.h>
 #include "atyfb.h"
@@ -419,7 +420,7 @@ void atyfb_imageblit(struct fb_info *info, const struct fb_image *image)
 		u32 *pbitmap, dwords = (src_bytes + 3) / 4;
 		for (pbitmap = (u32*)(image->data); dwords; dwords--, pbitmap++) {
 			wait_for_fifo(1, par);
-			aty_st_le32(HOST_DATA0, le32_to_cpup(pbitmap), par);
+			aty_st_le32(HOST_DATA0, get_unaligned_le32(pbitmap), par);
 		}
 	}
 
diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/fbdev/aty/mach64_ct.c
index 51f29d627ceb..51f29d627ceb 100644
--- a/drivers/video/aty/mach64_ct.c
+++ b/drivers/video/fbdev/aty/mach64_ct.c
diff --git a/drivers/video/aty/mach64_cursor.c b/drivers/video/fbdev/aty/mach64_cursor.c
index 95ec042ddbf8..2fa0317ab3c7 100644
--- a/drivers/video/aty/mach64_cursor.c
+++ b/drivers/video/fbdev/aty/mach64_cursor.c
@@ -5,6 +5,7 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/string.h>
+#include "../core/fb_draw.h"
 
 #include <asm/io.h>
 
@@ -157,24 +158,33 @@ static int atyfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 
 	    for (i = 0; i < height; i++) {
 		for (j = 0; j < width; j++) {
+			u16 l = 0xaaaa;
 			b = *src++;
 			m = *msk++;
 			switch (cursor->rop) {
 			case ROP_XOR:
 			    // Upper 4 bits of mask data
-			    fb_writeb(cursor_bits_lookup[(b ^ m) >> 4], dst++);
+			    l = cursor_bits_lookup[(b ^ m) >> 4] |
 			    // Lower 4 bits of mask
-			    fb_writeb(cursor_bits_lookup[(b ^ m) & 0x0f],
-				      dst++);
+				    (cursor_bits_lookup[(b ^ m) & 0x0f] << 8);
 			    break;
 			case ROP_COPY:
 			    // Upper 4 bits of mask data
-			    fb_writeb(cursor_bits_lookup[(b & m) >> 4], dst++);
+			    l = cursor_bits_lookup[(b & m) >> 4] |
 			    // Lower 4 bits of mask
-			    fb_writeb(cursor_bits_lookup[(b & m) & 0x0f],
-				      dst++);
+				    (cursor_bits_lookup[(b & m) & 0x0f] << 8);
 			    break;
 			}
+			/*
+			 * If cursor size is not a multiple of 8 characters
+			 * we must pad it with transparent pattern (0xaaaa).
+			 */
+			if ((j + 1) * 8 > cursor->image.width) {
+				l = comp(l, 0xaaaa,
+				    (1 << ((cursor->image.width & 7) * 2)) - 1);
+			}
+			fb_writeb(l & 0xff, dst++);
+			fb_writeb(l >> 8, dst++);
 		}
 		dst += offset;
 	    }
diff --git a/drivers/video/aty/mach64_gx.c b/drivers/video/fbdev/aty/mach64_gx.c
index 10c988aef58e..10c988aef58e 100644
--- a/drivers/video/aty/mach64_gx.c
+++ b/drivers/video/fbdev/aty/mach64_gx.c
diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/fbdev/aty/radeon_accel.c
index a469a3d6edcb..a469a3d6edcb 100644
--- a/drivers/video/aty/radeon_accel.c
+++ b/drivers/video/fbdev/aty/radeon_accel.c
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/fbdev/aty/radeon_backlight.c
index db572df7e1ef..db572df7e1ef 100644
--- a/drivers/video/aty/radeon_backlight.c
+++ b/drivers/video/fbdev/aty/radeon_backlight.c
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c
index 26d80a4486fb..26d80a4486fb 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/fbdev/aty/radeon_base.c
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/fbdev/aty/radeon_i2c.c
index ab1d0fd76316..ab1d0fd76316 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/fbdev/aty/radeon_i2c.c
diff --git a/drivers/video/aty/radeon_monitor.c b/drivers/video/fbdev/aty/radeon_monitor.c
index bc078d50d8f1..bc078d50d8f1 100644
--- a/drivers/video/aty/radeon_monitor.c
+++ b/drivers/video/fbdev/aty/radeon_monitor.c
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/fbdev/aty/radeon_pm.c
index 46a12f1a93c3..46a12f1a93c3 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/fbdev/aty/radeon_pm.c
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/fbdev/aty/radeonfb.h
index cb846044f57c..cb846044f57c 100644
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/fbdev/aty/radeonfb.h
diff --git a/drivers/video/au1100fb.c b/drivers/video/fbdev/au1100fb.c
index 372d4aea9d1c..372d4aea9d1c 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/fbdev/au1100fb.c
diff --git a/drivers/video/au1100fb.h b/drivers/video/fbdev/au1100fb.h
index 12d9642d5465..12d9642d5465 100644
--- a/drivers/video/au1100fb.h
+++ b/drivers/video/fbdev/au1100fb.h
diff --git a/drivers/video/au1200fb.c b/drivers/video/fbdev/au1200fb.c
index 4cfba78a1458..4cfba78a1458 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/fbdev/au1200fb.c
diff --git a/drivers/video/au1200fb.h b/drivers/video/fbdev/au1200fb.h
index e2672714d8d4..e2672714d8d4 100644
--- a/drivers/video/au1200fb.h
+++ b/drivers/video/fbdev/au1200fb.h
diff --git a/drivers/video/auo_k1900fb.c b/drivers/video/fbdev/auo_k1900fb.c
index f5b668e77af3..f5b668e77af3 100644
--- a/drivers/video/auo_k1900fb.c
+++ b/drivers/video/fbdev/auo_k1900fb.c
diff --git a/drivers/video/auo_k1901fb.c b/drivers/video/fbdev/auo_k1901fb.c
index 12b9adcb75c5..12b9adcb75c5 100644
--- a/drivers/video/auo_k1901fb.c
+++ b/drivers/video/fbdev/auo_k1901fb.c
diff --git a/drivers/video/auo_k190x.c b/drivers/video/fbdev/auo_k190x.c
index 8d2499d1cafb..8d2499d1cafb 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/fbdev/auo_k190x.c
diff --git a/drivers/video/auo_k190x.h b/drivers/video/fbdev/auo_k190x.h
index e35af1f51b28..e35af1f51b28 100644
--- a/drivers/video/auo_k190x.h
+++ b/drivers/video/fbdev/auo_k190x.h
diff --git a/drivers/video/bf537-lq035.c b/drivers/video/fbdev/bf537-lq035.c
index a82d2578d976..a82d2578d976 100644
--- a/drivers/video/bf537-lq035.c
+++ b/drivers/video/fbdev/bf537-lq035.c
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/fbdev/bf54x-lq043fb.c
index 42b8f9d11018..e2c42ad8515a 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/fbdev/bf54x-lq043fb.c
@@ -49,13 +49,13 @@
 #include <linux/spinlock.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <asm/blackfin.h>
 #include <asm/irq.h>
 #include <asm/dpmc.h>
 #include <asm/dma-mapping.h>
 #include <asm/dma.h>
-#include <asm/gpio.h>
 #include <asm/portmux.h>
 
 #include <mach/bf54x-lq043.h>
diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/fbdev/bfin-lq035q1-fb.c
index b594a58ff21d..b594a58ff21d 100644
--- a/drivers/video/bfin-lq035q1-fb.c
+++ b/drivers/video/fbdev/bfin-lq035q1-fb.c
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/fbdev/bfin-t350mcqb-fb.c
index b5cf1307a3d9..b5cf1307a3d9 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/fbdev/bfin-t350mcqb-fb.c
diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/fbdev/bfin_adv7393fb.c
index a54f7f7d763b..a54f7f7d763b 100644
--- a/drivers/video/bfin_adv7393fb.c
+++ b/drivers/video/fbdev/bfin_adv7393fb.c
diff --git a/drivers/video/bfin_adv7393fb.h b/drivers/video/fbdev/bfin_adv7393fb.h
index cd591b5152a5..cd591b5152a5 100644
--- a/drivers/video/bfin_adv7393fb.h
+++ b/drivers/video/fbdev/bfin_adv7393fb.h
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/fbdev/broadsheetfb.c
index 8556264b16b7..8556264b16b7 100644
--- a/drivers/video/broadsheetfb.c
+++ b/drivers/video/fbdev/broadsheetfb.c
diff --git a/drivers/video/bt431.h b/drivers/video/fbdev/bt431.h
index 04e0cfbba538..04e0cfbba538 100644
--- a/drivers/video/bt431.h
+++ b/drivers/video/fbdev/bt431.h
diff --git a/drivers/video/bt455.h b/drivers/video/fbdev/bt455.h
index 80f61b03e9ae..80f61b03e9ae 100644
--- a/drivers/video/bt455.h
+++ b/drivers/video/fbdev/bt455.h
diff --git a/drivers/video/bw2.c b/drivers/video/fbdev/bw2.c
index bc123d6947a4..bc123d6947a4 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/fbdev/bw2.c
diff --git a/drivers/video/c2p.h b/drivers/video/fbdev/c2p.h
index 6c38d40427d8..6c38d40427d8 100644
--- a/drivers/video/c2p.h
+++ b/drivers/video/fbdev/c2p.h
diff --git a/drivers/video/c2p_core.h b/drivers/video/fbdev/c2p_core.h
index e1035a865fb9..e1035a865fb9 100644
--- a/drivers/video/c2p_core.h
+++ b/drivers/video/fbdev/c2p_core.h
diff --git a/drivers/video/c2p_iplan2.c b/drivers/video/fbdev/c2p_iplan2.c
index 19156dc6158c..19156dc6158c 100644
--- a/drivers/video/c2p_iplan2.c
+++ b/drivers/video/fbdev/c2p_iplan2.c
diff --git a/drivers/video/c2p_planar.c b/drivers/video/fbdev/c2p_planar.c
index ec7ac8526f06..ec7ac8526f06 100644
--- a/drivers/video/c2p_planar.c
+++ b/drivers/video/fbdev/c2p_planar.c
diff --git a/drivers/video/carminefb.c b/drivers/video/fbdev/carminefb.c
index 65f7c15f5fdb..65f7c15f5fdb 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/fbdev/carminefb.c
diff --git a/drivers/video/carminefb.h b/drivers/video/fbdev/carminefb.h
index 05306de0c6b6..05306de0c6b6 100644
--- a/drivers/video/carminefb.h
+++ b/drivers/video/fbdev/carminefb.h
diff --git a/drivers/video/carminefb_regs.h b/drivers/video/fbdev/carminefb_regs.h
index 045215600b73..045215600b73 100644
--- a/drivers/video/carminefb_regs.h
+++ b/drivers/video/fbdev/carminefb_regs.h
diff --git a/drivers/video/cg14.c b/drivers/video/fbdev/cg14.c
index c79745b136bb..c79745b136bb 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/fbdev/cg14.c
diff --git a/drivers/video/cg3.c b/drivers/video/fbdev/cg3.c
index 64a89d5747ed..64a89d5747ed 100644
--- a/drivers/video/cg3.c
+++ b/drivers/video/fbdev/cg3.c
diff --git a/drivers/video/cg6.c b/drivers/video/fbdev/cg6.c
index 70781fea092a..70781fea092a 100644
--- a/drivers/video/cg6.c
+++ b/drivers/video/fbdev/cg6.c
diff --git a/drivers/video/chipsfb.c b/drivers/video/fbdev/chipsfb.c
index 206a66b61072..206a66b61072 100644
--- a/drivers/video/chipsfb.c
+++ b/drivers/video/fbdev/chipsfb.c
diff --git a/drivers/video/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
index d992aa5eb3f0..d992aa5eb3f0 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/fbdev/cirrusfb.c
diff --git a/drivers/video/clps711xfb.c b/drivers/video/fbdev/clps711xfb.c
index f00980607b8f..f00980607b8f 100644
--- a/drivers/video/clps711xfb.c
+++ b/drivers/video/fbdev/clps711xfb.c
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/fbdev/cobalt_lcdfb.c
index d5533f4db1cf..d5533f4db1cf 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/fbdev/cobalt_lcdfb.c
diff --git a/drivers/video/controlfb.c b/drivers/video/fbdev/controlfb.c
index fdadef979238..fdadef979238 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
diff --git a/drivers/video/controlfb.h b/drivers/video/fbdev/controlfb.h
index 6026c60fc100..6026c60fc100 100644
--- a/drivers/video/controlfb.h
+++ b/drivers/video/fbdev/controlfb.h
diff --git a/drivers/video/fbdev/core/Makefile b/drivers/video/fbdev/core/Makefile
new file mode 100644
index 000000000000..fa306538dac2
--- /dev/null
+++ b/drivers/video/fbdev/core/Makefile
@@ -0,0 +1,16 @@
+obj-y                             += fb_notify.o
+obj-$(CONFIG_FB)                  += fb.o
+fb-y                              := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
+                                     modedb.o fbcvt.o
+fb-objs                           := $(fb-y)
+
+obj-$(CONFIG_FB_CFB_FILLRECT)  += cfbfillrect.o
+obj-$(CONFIG_FB_CFB_COPYAREA)  += cfbcopyarea.o
+obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
+obj-$(CONFIG_FB_SYS_FILLRECT)  += sysfillrect.o
+obj-$(CONFIG_FB_SYS_COPYAREA)  += syscopyarea.o
+obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o
+obj-$(CONFIG_FB_SYS_FOPS)      += fb_sys_fops.o
+obj-$(CONFIG_FB_SVGALIB)       += svgalib.o
+obj-$(CONFIG_FB_DDC)           += fb_ddc.o
+obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
diff --git a/drivers/video/cfbcopyarea.c b/drivers/video/fbdev/core/cfbcopyarea.c
index bb5a96b1645d..bcb57235fcc7 100644
--- a/drivers/video/cfbcopyarea.c
+++ b/drivers/video/fbdev/core/cfbcopyarea.c
@@ -43,13 +43,22 @@
      */
 
 static void
-bitcpy(struct fb_info *p, unsigned long __iomem *dst, int dst_idx,
-		const unsigned long __iomem *src, int src_idx, int bits,
+bitcpy(struct fb_info *p, unsigned long __iomem *dst, unsigned dst_idx,
+		const unsigned long __iomem *src, unsigned src_idx, int bits,
 		unsigned n, u32 bswapmask)
 {
 	unsigned long first, last;
 	int const shift = dst_idx-src_idx;
-	int left, right;
+
+#if 0
+	/*
+	 * If you suspect bug in this function, compare it with this simple
+	 * memmove implementation.
+	 */
+	fb_memmove((char *)dst + ((dst_idx & (bits - 1))) / 8,
+		   (char *)src + ((src_idx & (bits - 1))) / 8, n / 8);
+	return;
+#endif
 
 	first = fb_shifted_pixels_mask_long(p, dst_idx, bswapmask);
 	last = ~fb_shifted_pixels_mask_long(p, (dst_idx+n) % bits, bswapmask);
@@ -98,9 +107,8 @@ bitcpy(struct fb_info *p, unsigned long __iomem *dst, int dst_idx,
 		unsigned long d0, d1;
 		int m;
 
-		right = shift & (bits - 1);
-		left = -shift & (bits - 1);
-		bswapmask &= shift;
+		int const left = shift & (bits - 1);
+		int const right = -shift & (bits - 1);
 
 		if (dst_idx+n <= bits) {
 			// Single destination word
@@ -110,15 +118,15 @@ bitcpy(struct fb_info *p, unsigned long __iomem *dst, int dst_idx,
 			d0 = fb_rev_pixels_in_long(d0, bswapmask);
 			if (shift > 0) {
 				// Single source word
-				d0 >>= right;
+				d0 <<= left;
 			} else if (src_idx+n <= bits) {
 				// Single source word
-				d0 <<= left;
+				d0 >>= right;
 			} else {
 				// 2 source words
 				d1 = FB_READL(src + 1);
 				d1 = fb_rev_pixels_in_long(d1, bswapmask);
-				d0 = d0<<left | d1>>right;
+				d0 = d0 >> right | d1 << left;
 			}
 			d0 = fb_rev_pixels_in_long(d0, bswapmask);
 			FB_WRITEL(comp(d0, FB_READL(dst), first), dst);
@@ -135,60 +143,59 @@ bitcpy(struct fb_info *p, unsigned long __iomem *dst, int dst_idx,
 			if (shift > 0) {
 				// Single source word
 				d1 = d0;
-				d0 >>= right;
-				dst++;
+				d0 <<= left;
 				n -= bits - dst_idx;
 			} else {
 				// 2 source words
 				d1 = FB_READL(src++);
 				d1 = fb_rev_pixels_in_long(d1, bswapmask);
 
-				d0 = d0<<left | d1>>right;
-				dst++;
+				d0 = d0 >> right | d1 << left;
 				n -= bits - dst_idx;
 			}
 			d0 = fb_rev_pixels_in_long(d0, bswapmask);
 			FB_WRITEL(comp(d0, FB_READL(dst), first), dst);
 			d0 = d1;
+			dst++;
 
 			// Main chunk
 			m = n % bits;
 			n /= bits;
 			while ((n >= 4) && !bswapmask) {
 				d1 = FB_READL(src++);
-				FB_WRITEL(d0 << left | d1 >> right, dst++);
+				FB_WRITEL(d0 >> right | d1 << left, dst++);
 				d0 = d1;
 				d1 = FB_READL(src++);
-				FB_WRITEL(d0 << left | d1 >> right, dst++);
+				FB_WRITEL(d0 >> right | d1 << left, dst++);
 				d0 = d1;
 				d1 = FB_READL(src++);
-				FB_WRITEL(d0 << left | d1 >> right, dst++);
+				FB_WRITEL(d0 >> right | d1 << left, dst++);
 				d0 = d1;
 				d1 = FB_READL(src++);
-				FB_WRITEL(d0 << left | d1 >> right, dst++);
+				FB_WRITEL(d0 >> right | d1 << left, dst++);
 				d0 = d1;
 				n -= 4;
 			}
 			while (n--) {
 				d1 = FB_READL(src++);
 				d1 = fb_rev_pixels_in_long(d1, bswapmask);
-				d0 = d0 << left | d1 >> right;
+				d0 = d0 >> right | d1 << left;
 				d0 = fb_rev_pixels_in_long(d0, bswapmask);
 				FB_WRITEL(d0, dst++);
 				d0 = d1;
 			}
 
 			// Trailing bits
-			if (last) {
-				if (m <= right) {
+			if (m) {
+				if (m <= bits - right) {
 					// Single source word
-					d0 <<= left;
+					d0 >>= right;
 				} else {
 					// 2 source words
 					d1 = FB_READL(src);
 					d1 = fb_rev_pixels_in_long(d1,
 								bswapmask);
-					d0 = d0<<left | d1>>right;
+					d0 = d0 >> right | d1 << left;
 				}
 				d0 = fb_rev_pixels_in_long(d0, bswapmask);
 				FB_WRITEL(comp(d0, FB_READL(dst), last), dst);
@@ -202,43 +209,46 @@ bitcpy(struct fb_info *p, unsigned long __iomem *dst, int dst_idx,
      */
 
 static void
-bitcpy_rev(struct fb_info *p, unsigned long __iomem *dst, int dst_idx,
-		const unsigned long __iomem *src, int src_idx, int bits,
+bitcpy_rev(struct fb_info *p, unsigned long __iomem *dst, unsigned dst_idx,
+		const unsigned long __iomem *src, unsigned src_idx, int bits,
 		unsigned n, u32 bswapmask)
 {
 	unsigned long first, last;
 	int shift;
 
-	dst += (n-1)/bits;
-	src += (n-1)/bits;
-	if ((n-1) % bits) {
-		dst_idx += (n-1) % bits;
-		dst += dst_idx >> (ffs(bits) - 1);
-		dst_idx &= bits - 1;
-		src_idx += (n-1) % bits;
-		src += src_idx >> (ffs(bits) - 1);
-		src_idx &= bits - 1;
-	}
+#if 0
+	/*
+	 * If you suspect bug in this function, compare it with this simple
+	 * memmove implementation.
+	 */
+	fb_memmove((char *)dst + ((dst_idx & (bits - 1))) / 8,
+		   (char *)src + ((src_idx & (bits - 1))) / 8, n / 8);
+	return;
+#endif
+
+	dst += (dst_idx + n - 1) / bits;
+	src += (src_idx + n - 1) / bits;
+	dst_idx = (dst_idx + n - 1) % bits;
+	src_idx = (src_idx + n - 1) % bits;
 
 	shift = dst_idx-src_idx;
 
-	first = fb_shifted_pixels_mask_long(p, bits - 1 - dst_idx, bswapmask);
-	last = ~fb_shifted_pixels_mask_long(p, bits - 1 - ((dst_idx-n) % bits),
-					    bswapmask);
+	first = ~fb_shifted_pixels_mask_long(p, (dst_idx + 1) % bits, bswapmask);
+	last = fb_shifted_pixels_mask_long(p, (bits + dst_idx + 1 - n) % bits, bswapmask);
 
 	if (!shift) {
 		// Same alignment for source and dest
 
 		if ((unsigned long)dst_idx+1 >= n) {
 			// Single word
-			if (last)
-				first &= last;
-			FB_WRITEL( comp( FB_READL(src), FB_READL(dst), first), dst);
+			if (first)
+				last &= first;
+			FB_WRITEL( comp( FB_READL(src), FB_READL(dst), last), dst);
 		} else {
 			// Multiple destination words
 
 			// Leading bits
-			if (first != ~0UL) {
+			if (first) {
 				FB_WRITEL( comp( FB_READL(src), FB_READL(dst), first), dst);
 				dst--;
 				src--;
@@ -262,7 +272,7 @@ bitcpy_rev(struct fb_info *p, unsigned long __iomem *dst, int dst_idx,
 				FB_WRITEL(FB_READL(src--), dst--);
 
 			// Trailing bits
-			if (last)
+			if (last != -1UL)
 				FB_WRITEL( comp( FB_READL(src), FB_READL(dst), last), dst);
 		}
 	} else {
@@ -270,29 +280,28 @@ bitcpy_rev(struct fb_info *p, unsigned long __iomem *dst, int dst_idx,
 		unsigned long d0, d1;
 		int m;
 
-		int const left = -shift & (bits-1);
-		int const right = shift & (bits-1);
-		bswapmask &= shift;
+		int const left = shift & (bits-1);
+		int const right = -shift & (bits-1);
 
 		if ((unsigned long)dst_idx+1 >= n) {
 			// Single destination word
-			if (last)
-				first &= last;
+			if (first)
+				last &= first;
 			d0 = FB_READL(src);
 			if (shift < 0) {
 				// Single source word
-				d0 <<= left;
+				d0 >>= right;
 			} else if (1+(unsigned long)src_idx >= n) {
 				// Single source word
-				d0 >>= right;
+				d0 <<= left;
 			} else {
 				// 2 source words
 				d1 = FB_READL(src - 1);
 				d1 = fb_rev_pixels_in_long(d1, bswapmask);
-				d0 = d0>>right | d1<<left;
+				d0 = d0 << left | d1 >> right;
 			}
 			d0 = fb_rev_pixels_in_long(d0, bswapmask);
-			FB_WRITEL(comp(d0, FB_READL(dst), first), dst);
+			FB_WRITEL(comp(d0, FB_READL(dst), last), dst);
 		} else {
 			// Multiple destination words
 			/** We must always remember the last value read, because in case
@@ -307,12 +316,12 @@ bitcpy_rev(struct fb_info *p, unsigned long __iomem *dst, int dst_idx,
 			if (shift < 0) {
 				// Single source word
 				d1 = d0;
-				d0 <<= left;
+				d0 >>= right;
 			} else {
 				// 2 source words
 				d1 = FB_READL(src--);
 				d1 = fb_rev_pixels_in_long(d1, bswapmask);
-				d0 = d0>>right | d1<<left;
+				d0 = d0 << left | d1 >> right;
 			}
 			d0 = fb_rev_pixels_in_long(d0, bswapmask);
 			FB_WRITEL(comp(d0, FB_READL(dst), first), dst);
@@ -325,39 +334,39 @@ bitcpy_rev(struct fb_info *p, unsigned long __iomem *dst, int dst_idx,
 			n /= bits;
 			while ((n >= 4) && !bswapmask) {
 				d1 = FB_READL(src--);
-				FB_WRITEL(d0 >> right | d1 << left, dst--);
+				FB_WRITEL(d0 << left | d1 >> right, dst--);
 				d0 = d1;
 				d1 = FB_READL(src--);
-				FB_WRITEL(d0 >> right | d1 << left, dst--);
+				FB_WRITEL(d0 << left | d1 >> right, dst--);
 				d0 = d1;
 				d1 = FB_READL(src--);
-				FB_WRITEL(d0 >> right | d1 << left, dst--);
+				FB_WRITEL(d0 << left | d1 >> right, dst--);
 				d0 = d1;
 				d1 = FB_READL(src--);
-				FB_WRITEL(d0 >> right | d1 << left, dst--);
+				FB_WRITEL(d0 << left | d1 >> right, dst--);
 				d0 = d1;
 				n -= 4;
 			}
 			while (n--) {
 				d1 = FB_READL(src--);
 				d1 = fb_rev_pixels_in_long(d1, bswapmask);
-				d0 = d0 >> right | d1 << left;
+				d0 = d0 << left | d1 >> right;
 				d0 = fb_rev_pixels_in_long(d0, bswapmask);
 				FB_WRITEL(d0, dst--);
 				d0 = d1;
 			}
 
 			// Trailing bits
-			if (last) {
-				if (m <= left) {
+			if (m) {
+				if (m <= bits - left) {
 					// Single source word
-					d0 >>= right;
+					d0 <<= left;
 				} else {
 					// 2 source words
 					d1 = FB_READL(src);
 					d1 = fb_rev_pixels_in_long(d1,
 								bswapmask);
-					d0 = d0>>right | d1<<left;
+					d0 = d0 << left | d1 >> right;
 				}
 				d0 = fb_rev_pixels_in_long(d0, bswapmask);
 				FB_WRITEL(comp(d0, FB_READL(dst), last), dst);
@@ -371,9 +380,9 @@ void cfb_copyarea(struct fb_info *p, const struct fb_copyarea *area)
 	u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy;
 	u32 height = area->height, width = area->width;
 	unsigned long const bits_per_line = p->fix.line_length*8u;
-	unsigned long __iomem *dst = NULL, *src = NULL;
+	unsigned long __iomem *base = NULL;
 	int bits = BITS_PER_LONG, bytes = bits >> 3;
-	int dst_idx = 0, src_idx = 0, rev_copy = 0;
+	unsigned dst_idx = 0, src_idx = 0, rev_copy = 0;
 	u32 bswapmask = fb_compute_bswapmask(p);
 
 	if (p->state != FBINFO_STATE_RUNNING)
@@ -389,7 +398,7 @@ void cfb_copyarea(struct fb_info *p, const struct fb_copyarea *area)
 
 	// split the base of the framebuffer into a long-aligned address and the
 	// index of the first bit
-	dst = src = (unsigned long __iomem *)((unsigned long)p->screen_base & ~(bytes-1));
+	base = (unsigned long __iomem *)((unsigned long)p->screen_base & ~(bytes-1));
 	dst_idx = src_idx = 8*((unsigned long)p->screen_base & (bytes-1));
 	// add offset of source and target area
 	dst_idx += dy*bits_per_line + dx*p->var.bits_per_pixel;
@@ -402,20 +411,14 @@ void cfb_copyarea(struct fb_info *p, const struct fb_copyarea *area)
 		while (height--) {
 			dst_idx -= bits_per_line;
 			src_idx -= bits_per_line;
-			dst += dst_idx >> (ffs(bits) - 1);
-			dst_idx &= (bytes - 1);
-			src += src_idx >> (ffs(bits) - 1);
-			src_idx &= (bytes - 1);
-			bitcpy_rev(p, dst, dst_idx, src, src_idx, bits,
+			bitcpy_rev(p, base + (dst_idx / bits), dst_idx % bits,
+				base + (src_idx / bits), src_idx % bits, bits,
 				width*p->var.bits_per_pixel, bswapmask);
 		}
 	} else {
 		while (height--) {
-			dst += dst_idx >> (ffs(bits) - 1);
-			dst_idx &= (bytes - 1);
-			src += src_idx >> (ffs(bits) - 1);
-			src_idx &= (bytes - 1);
-			bitcpy(p, dst, dst_idx, src, src_idx, bits,
+			bitcpy(p, base + (dst_idx / bits), dst_idx % bits,
+				base + (src_idx / bits), src_idx % bits, bits,
 				width*p->var.bits_per_pixel, bswapmask);
 			dst_idx += bits_per_line;
 			src_idx += bits_per_line;
diff --git a/drivers/video/cfbfillrect.c b/drivers/video/fbdev/core/cfbfillrect.c
index ba9f58b2a5e8..ba9f58b2a5e8 100644
--- a/drivers/video/cfbfillrect.c
+++ b/drivers/video/fbdev/core/cfbfillrect.c
diff --git a/drivers/video/cfbimgblt.c b/drivers/video/fbdev/core/cfbimgblt.c
index a2bb276a8b24..a2bb276a8b24 100644
--- a/drivers/video/cfbimgblt.c
+++ b/drivers/video/fbdev/core/cfbimgblt.c
diff --git a/drivers/video/fb_ddc.c b/drivers/video/fbdev/core/fb_ddc.c
index 2b106f046fde..94322ccfedde 100644
--- a/drivers/video/fb_ddc.c
+++ b/drivers/video/fbdev/core/fb_ddc.c
@@ -15,7 +15,7 @@
 #include <linux/i2c-algo-bit.h>
 #include <linux/slab.h>
 
-#include "edid.h"
+#include "../edid.h"
 
 #define DDC_ADDR	0x50
 
diff --git a/drivers/video/fb_defio.c b/drivers/video/fbdev/core/fb_defio.c
index 900aa4ecd617..900aa4ecd617 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fbdev/core/fb_defio.c
diff --git a/drivers/video/fb_draw.h b/drivers/video/fbdev/core/fb_draw.h
index 624ee115f129..624ee115f129 100644
--- a/drivers/video/fb_draw.h
+++ b/drivers/video/fbdev/core/fb_draw.h
diff --git a/drivers/video/fb_notify.c b/drivers/video/fbdev/core/fb_notify.c
index 74c2da528884..74c2da528884 100644
--- a/drivers/video/fb_notify.c
+++ b/drivers/video/fbdev/core/fb_notify.c
diff --git a/drivers/video/fb_sys_fops.c b/drivers/video/fbdev/core/fb_sys_fops.c
index ff275d7f3eaf..ff275d7f3eaf 100644
--- a/drivers/video/fb_sys_fops.c
+++ b/drivers/video/fbdev/core/fb_sys_fops.c
diff --git a/drivers/video/fbcmap.c b/drivers/video/fbdev/core/fbcmap.c
index f89245b8ba8e..f89245b8ba8e 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbdev/core/fbcmap.c
diff --git a/drivers/video/fbcvt.c b/drivers/video/fbdev/core/fbcvt.c
index 7cb715dfc0e1..7cb715dfc0e1 100644
--- a/drivers/video/fbcvt.c
+++ b/drivers/video/fbdev/core/fbcvt.c
diff --git a/drivers/video/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index 7309ac704e26..b6d5008f361f 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -1596,8 +1596,7 @@ static int do_remove_conflicting_framebuffers(struct apertures_struct *a,
 			(primary && gen_aper && gen_aper->count &&
 			 gen_aper->ranges[0].base == VGA_FB_PHYS)) {
 
-			printk(KERN_INFO "fb: conflicting fb hw usage "
-			       "%s vs %s - removing generic driver\n",
+			printk(KERN_INFO "fb: switching to %s from %s\n",
 			       name, registered_fb[i]->fix.id);
 			ret = do_unregister_framebuffer(registered_fb[i]);
 			if (ret)
diff --git a/drivers/video/fbmon.c b/drivers/video/fbdev/core/fbmon.c
index 6103fa6fb54f..c204ebe6187e 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbdev/core/fbmon.c
@@ -37,7 +37,7 @@
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
 #endif
-#include "edid.h"
+#include "../edid.h"
 
 /*
  * EDID parser
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbdev/core/fbsysfs.c
index 53444ac19fe0..53444ac19fe0 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbdev/core/fbsysfs.c
diff --git a/drivers/video/modedb.c b/drivers/video/fbdev/core/modedb.c
index a9a907c440d7..a9a907c440d7 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/fbdev/core/modedb.c
diff --git a/drivers/video/svgalib.c b/drivers/video/fbdev/core/svgalib.c
index 9e01322fabe3..9e01322fabe3 100644
--- a/drivers/video/svgalib.c
+++ b/drivers/video/fbdev/core/svgalib.c
diff --git a/drivers/video/syscopyarea.c b/drivers/video/fbdev/core/syscopyarea.c
index 844a32fd38ed..844a32fd38ed 100644
--- a/drivers/video/syscopyarea.c
+++ b/drivers/video/fbdev/core/syscopyarea.c
diff --git a/drivers/video/sysfillrect.c b/drivers/video/fbdev/core/sysfillrect.c
index 33ee3d34f9d2..33ee3d34f9d2 100644
--- a/drivers/video/sysfillrect.c
+++ b/drivers/video/fbdev/core/sysfillrect.c
diff --git a/drivers/video/sysimgblt.c b/drivers/video/fbdev/core/sysimgblt.c
index a4d05b1b17d7..a4d05b1b17d7 100644
--- a/drivers/video/sysimgblt.c
+++ b/drivers/video/fbdev/core/sysimgblt.c
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/fbdev/cyber2000fb.c
index b0a950f36970..b0a950f36970 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/fbdev/cyber2000fb.c
diff --git a/drivers/video/cyber2000fb.h b/drivers/video/fbdev/cyber2000fb.h
index bad69102e774..bad69102e774 100644
--- a/drivers/video/cyber2000fb.h
+++ b/drivers/video/fbdev/cyber2000fb.h
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c
index a1d74dd11988..6b23508ff0a5 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/fbdev/da8xx-fb.c
@@ -663,15 +663,7 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 			(green << info->var.green.offset) |
 			(blue << info->var.blue.offset);
 
-		switch (info->var.bits_per_pixel) {
-		case 16:
-			((u16 *) (info->pseudo_palette))[regno] = v;
-			break;
-		case 24:
-		case 32:
-			((u32 *) (info->pseudo_palette))[regno] = v;
-			break;
-		}
+		((u32 *) (info->pseudo_palette))[regno] = v;
 		if (palette[0] != 0x4000) {
 			update_hw = 1;
 			palette[0] = 0x4000;
@@ -1546,7 +1538,7 @@ err_pm_runtime_disable:
 	return ret;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static struct lcdc_context {
 	u32 clk_enable;
 	u32 ctrl;
@@ -1610,9 +1602,9 @@ static void lcd_context_restore(void)
 	return;
 }
 
-static int fb_suspend(struct platform_device *dev, pm_message_t state)
+static int fb_suspend(struct device *dev)
 {
-	struct fb_info *info = platform_get_drvdata(dev);
+	struct fb_info *info = dev_get_drvdata(dev);
 	struct da8xx_fb_par *par = info->par;
 
 	console_lock();
@@ -1622,18 +1614,18 @@ static int fb_suspend(struct platform_device *dev, pm_message_t state)
 	fb_set_suspend(info, 1);
 	lcd_disable_raster(DA8XX_FRAME_WAIT);
 	lcd_context_save();
-	pm_runtime_put_sync(&dev->dev);
+	pm_runtime_put_sync(dev);
 	console_unlock();
 
 	return 0;
 }
-static int fb_resume(struct platform_device *dev)
+static int fb_resume(struct device *dev)
 {
-	struct fb_info *info = platform_get_drvdata(dev);
+	struct fb_info *info = dev_get_drvdata(dev);
 	struct da8xx_fb_par *par = info->par;
 
 	console_lock();
-	pm_runtime_get_sync(&dev->dev);
+	pm_runtime_get_sync(dev);
 	lcd_context_restore();
 	if (par->blank == FB_BLANK_UNBLANK) {
 		lcd_enable_raster();
@@ -1647,19 +1639,17 @@ static int fb_resume(struct platform_device *dev)
 
 	return 0;
 }
-#else
-#define fb_suspend NULL
-#define fb_resume NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(fb_pm_ops, fb_suspend, fb_resume);
+
 static struct platform_driver da8xx_fb_driver = {
 	.probe = fb_probe,
 	.remove = fb_remove,
-	.suspend = fb_suspend,
-	.resume = fb_resume,
 	.driver = {
 		   .name = DRIVER_NAME,
 		   .owner = THIS_MODULE,
+		   .pm	= &fb_pm_ops,
 		   },
 };
 module_platform_driver(da8xx_fb_driver);
diff --git a/drivers/video/dnfb.c b/drivers/video/fbdev/dnfb.c
index 3526899da61b..3526899da61b 100644
--- a/drivers/video/dnfb.c
+++ b/drivers/video/fbdev/dnfb.c
diff --git a/drivers/video/edid.h b/drivers/video/fbdev/edid.h
index d03a232d90b2..d03a232d90b2 100644
--- a/drivers/video/edid.h
+++ b/drivers/video/fbdev/edid.h
diff --git a/drivers/video/efifb.c b/drivers/video/fbdev/efifb.c
index cd7c0df9f24b..ae9618ff6735 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/fbdev/efifb.c
@@ -73,7 +73,6 @@ static void efifb_destroy(struct fb_info *info)
 		release_mem_region(info->apertures->ranges[0].base,
 				   info->apertures->ranges[0].size);
 	fb_dealloc_cmap(&info->cmap);
-	framebuffer_release(info);
 }
 
 static struct fb_ops efifb_ops = {
@@ -244,6 +243,7 @@ static int efifb_probe(struct platform_device *dev)
 		err = -ENOMEM;
 		goto err_release_mem;
 	}
+	platform_set_drvdata(dev, info);
 	info->pseudo_palette = info->par;
 	info->par = NULL;
 
@@ -337,12 +337,23 @@ err_release_mem:
 	return err;
 }
 
+static int efifb_remove(struct platform_device *pdev)
+{
+	struct fb_info *info = platform_get_drvdata(pdev);
+
+	unregister_framebuffer(info);
+	framebuffer_release(info);
+
+	return 0;
+}
+
 static struct platform_driver efifb_driver = {
 	.driver = {
 		.name = "efi-framebuffer",
 		.owner = THIS_MODULE,
 	},
 	.probe = efifb_probe,
+	.remove = efifb_remove,
 };
 
 module_platform_driver(efifb_driver);
diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/fbdev/ep93xx-fb.c
index 35a0f533f1a2..35a0f533f1a2 100644
--- a/drivers/video/ep93xx-fb.c
+++ b/drivers/video/fbdev/ep93xx-fb.c
diff --git a/drivers/video/exynos/Kconfig b/drivers/video/fbdev/exynos/Kconfig
index 75c8a8e7efc0..fcf2d48ac6d1 100644
--- a/drivers/video/exynos/Kconfig
+++ b/drivers/video/fbdev/exynos/Kconfig
@@ -29,11 +29,4 @@ config EXYNOS_LCD_S6E8AX0
 	  If you have an S6E8AX0 MIPI AMOLED LCD Panel, say Y to enable its
 	  LCD control driver.
 
-config EXYNOS_DP
-	bool "EXYNOS DP driver support"
-	depends on OF && ARCH_EXYNOS
-	default n
-	help
-	  This enables support for DP device.
-
 endif # EXYNOS_VIDEO
diff --git a/drivers/video/exynos/Makefile b/drivers/video/fbdev/exynos/Makefile
index ec7772e452a9..b5b1bd228abb 100644
--- a/drivers/video/exynos/Makefile
+++ b/drivers/video/fbdev/exynos/Makefile
@@ -5,4 +5,3 @@
 obj-$(CONFIG_EXYNOS_MIPI_DSI)		+= exynos_mipi_dsi.o exynos_mipi_dsi_common.o \
 				     	exynos_mipi_dsi_lowlevel.o
 obj-$(CONFIG_EXYNOS_LCD_S6E8AX0)	+= s6e8ax0.o
-obj-$(CONFIG_EXYNOS_DP)			+= exynos_dp_core.o exynos_dp_reg.o
diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi.c
index cee9602f9a7b..cee9602f9a7b 100644
--- a/drivers/video/exynos/exynos_mipi_dsi.c
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi.c
diff --git a/drivers/video/exynos/exynos_mipi_dsi_common.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c
index 85edabfdef5a..85edabfdef5a 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_common.c
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c
diff --git a/drivers/video/exynos/exynos_mipi_dsi_common.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.h
index 412552274df3..412552274df3 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_common.h
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.h
diff --git a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.c
index c148d06540c1..c148d06540c1 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.c
diff --git a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.h
index 85460701c7ea..85460701c7ea 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.h
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.h
diff --git a/drivers/video/exynos/exynos_mipi_dsi_regs.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_regs.h
index 4227106d3fd0..4227106d3fd0 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_regs.h
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_regs.h
diff --git a/drivers/video/exynos/s6e8ax0.c b/drivers/video/fbdev/exynos/s6e8ax0.c
index ca2602413aa4..29e70ed3f154 100644
--- a/drivers/video/exynos/s6e8ax0.c
+++ b/drivers/video/fbdev/exynos/s6e8ax0.c
@@ -794,19 +794,18 @@ static int s6e8ax0_probe(struct mipi_dsim_lcd_device *dsim_dev)
 		return ret;
 	}
 
-	lcd->ld = lcd_device_register("s6e8ax0", lcd->dev, lcd,
+	lcd->ld = devm_lcd_device_register(lcd->dev, "s6e8ax0", lcd->dev, lcd,
 			&s6e8ax0_lcd_ops);
 	if (IS_ERR(lcd->ld)) {
 		dev_err(lcd->dev, "failed to register lcd ops.\n");
 		return PTR_ERR(lcd->ld);
 	}
 
-	lcd->bd = backlight_device_register("s6e8ax0-bl", lcd->dev, lcd,
-			&s6e8ax0_backlight_ops, NULL);
+	lcd->bd = devm_backlight_device_register(lcd->dev, "s6e8ax0-bl",
+				lcd->dev, lcd, &s6e8ax0_backlight_ops, NULL);
 	if (IS_ERR(lcd->bd)) {
 		dev_err(lcd->dev, "failed to register backlight ops.\n");
-		ret = PTR_ERR(lcd->bd);
-		goto err_backlight_register;
+		return PTR_ERR(lcd->bd);
 	}
 
 	lcd->bd->props.max_brightness = MAX_BRIGHTNESS;
@@ -834,10 +833,6 @@ static int s6e8ax0_probe(struct mipi_dsim_lcd_device *dsim_dev)
 	dev_dbg(lcd->dev, "probed s6e8ax0 panel driver.\n");
 
 	return 0;
-
-err_backlight_register:
-	lcd_device_unregister(lcd->ld);
-	return ret;
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/video/fb-puv3.c b/drivers/video/fbdev/fb-puv3.c
index 6db9ebd042a3..6db9ebd042a3 100644
--- a/drivers/video/fb-puv3.c
+++ b/drivers/video/fbdev/fb-puv3.c
diff --git a/drivers/video/ffb.c b/drivers/video/fbdev/ffb.c
index 4c4ffa61ae26..4c4ffa61ae26 100644
--- a/drivers/video/ffb.c
+++ b/drivers/video/fbdev/ffb.c
diff --git a/drivers/video/fm2fb.c b/drivers/video/fbdev/fm2fb.c
index e69d47af9932..e69d47af9932 100644
--- a/drivers/video/fm2fb.c
+++ b/drivers/video/fbdev/fm2fb.c
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fbdev/fsl-diu-fb.c
index e8758b9c3bcc..e8758b9c3bcc 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fbdev/fsl-diu-fb.c
diff --git a/drivers/video/g364fb.c b/drivers/video/fbdev/g364fb.c
index 223896cc5f7d..223896cc5f7d 100644
--- a/drivers/video/g364fb.c
+++ b/drivers/video/fbdev/g364fb.c
diff --git a/drivers/video/gbefb.c b/drivers/video/fbdev/gbefb.c
index 4c7cb368a9dc..3ec65a878ac8 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/fbdev/gbefb.c
@@ -45,10 +45,6 @@ struct gbefb_par {
 #define GBE_BASE	0x16000000 /* SGI O2 */
 #endif
 
-#ifdef CONFIG_X86_VISWS
-#define GBE_BASE	0xd0000000 /* SGI Visual Workstation */
-#endif
-
 /* macro for fastest write-though access to the framebuffer */
 #ifdef CONFIG_MIPS
 #ifdef CONFIG_CPU_R10000
diff --git a/drivers/video/geode/Kconfig b/drivers/video/fbdev/geode/Kconfig
index 1e8555284786..1e8555284786 100644
--- a/drivers/video/geode/Kconfig
+++ b/drivers/video/fbdev/geode/Kconfig
diff --git a/drivers/video/geode/Makefile b/drivers/video/fbdev/geode/Makefile
index 5c98da126883..5c98da126883 100644
--- a/drivers/video/geode/Makefile
+++ b/drivers/video/fbdev/geode/Makefile
diff --git a/drivers/video/geode/display_gx.c b/drivers/video/fbdev/geode/display_gx.c
index f0af911a096d..f0af911a096d 100644
--- a/drivers/video/geode/display_gx.c
+++ b/drivers/video/fbdev/geode/display_gx.c
diff --git a/drivers/video/geode/display_gx1.c b/drivers/video/fbdev/geode/display_gx1.c
index 926d53eeb549..926d53eeb549 100644
--- a/drivers/video/geode/display_gx1.c
+++ b/drivers/video/fbdev/geode/display_gx1.c
diff --git a/drivers/video/geode/display_gx1.h b/drivers/video/fbdev/geode/display_gx1.h
index 671c05558c79..671c05558c79 100644
--- a/drivers/video/geode/display_gx1.h
+++ b/drivers/video/fbdev/geode/display_gx1.h
diff --git a/drivers/video/geode/geodefb.h b/drivers/video/fbdev/geode/geodefb.h
index ae04820e0c57..ae04820e0c57 100644
--- a/drivers/video/geode/geodefb.h
+++ b/drivers/video/fbdev/geode/geodefb.h
diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/fbdev/geode/gx1fb_core.c
index 2794ba11f332..2794ba11f332 100644
--- a/drivers/video/geode/gx1fb_core.c
+++ b/drivers/video/fbdev/geode/gx1fb_core.c
diff --git a/drivers/video/geode/gxfb.h b/drivers/video/fbdev/geode/gxfb.h
index d19e9378b0c0..d19e9378b0c0 100644
--- a/drivers/video/geode/gxfb.h
+++ b/drivers/video/fbdev/geode/gxfb.h
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/fbdev/geode/gxfb_core.c
index 1790f14bab15..1790f14bab15 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/fbdev/geode/gxfb_core.c
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/fbdev/geode/lxfb.h
index cfcd8090f313..cfcd8090f313 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/fbdev/geode/lxfb.h
diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/fbdev/geode/lxfb_core.c
index 9e1d19d673a1..9e1d19d673a1 100644
--- a/drivers/video/geode/lxfb_core.c
+++ b/drivers/video/fbdev/geode/lxfb_core.c
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/fbdev/geode/lxfb_ops.c
index 79e9abc72b83..79e9abc72b83 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/fbdev/geode/lxfb_ops.c
diff --git a/drivers/video/geode/suspend_gx.c b/drivers/video/fbdev/geode/suspend_gx.c
index 1bb043d70c64..1bb043d70c64 100644
--- a/drivers/video/geode/suspend_gx.c
+++ b/drivers/video/fbdev/geode/suspend_gx.c
diff --git a/drivers/video/geode/video_cs5530.c b/drivers/video/fbdev/geode/video_cs5530.c
index 649c3943d431..649c3943d431 100644
--- a/drivers/video/geode/video_cs5530.c
+++ b/drivers/video/fbdev/geode/video_cs5530.c
diff --git a/drivers/video/geode/video_cs5530.h b/drivers/video/fbdev/geode/video_cs5530.h
index 56cecca7f1ce..56cecca7f1ce 100644
--- a/drivers/video/geode/video_cs5530.h
+++ b/drivers/video/fbdev/geode/video_cs5530.h
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/fbdev/geode/video_gx.c
index 6082f653c68a..6082f653c68a 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/fbdev/geode/video_gx.c
diff --git a/drivers/video/goldfishfb.c b/drivers/video/fbdev/goldfishfb.c
index 7f6c9e6cfc6c..7f6c9e6cfc6c 100644
--- a/drivers/video/goldfishfb.c
+++ b/drivers/video/fbdev/goldfishfb.c
diff --git a/drivers/video/grvga.c b/drivers/video/fbdev/grvga.c
index c078701f15f6..c078701f15f6 100644
--- a/drivers/video/grvga.c
+++ b/drivers/video/fbdev/grvga.c
diff --git a/drivers/video/gxt4500.c b/drivers/video/fbdev/gxt4500.c
index 135d78a02588..135d78a02588 100644
--- a/drivers/video/gxt4500.c
+++ b/drivers/video/fbdev/gxt4500.c
diff --git a/drivers/video/hecubafb.c b/drivers/video/fbdev/hecubafb.c
index f64120ec9192..f64120ec9192 100644
--- a/drivers/video/hecubafb.c
+++ b/drivers/video/fbdev/hecubafb.c
diff --git a/drivers/video/hgafb.c b/drivers/video/fbdev/hgafb.c
index 5ff9fe2116a4..5ff9fe2116a4 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
diff --git a/drivers/video/hitfb.c b/drivers/video/fbdev/hitfb.c
index a648d5186c6e..a648d5186c6e 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/fbdev/hitfb.c
diff --git a/drivers/video/hpfb.c b/drivers/video/fbdev/hpfb.c
index a1b7e5fa9b09..a1b7e5fa9b09 100644
--- a/drivers/video/hpfb.c
+++ b/drivers/video/fbdev/hpfb.c
diff --git a/drivers/video/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index 130708f96430..e23392ec5af3 100644
--- a/drivers/video/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -42,6 +42,7 @@
 #include <linux/completion.h>
 #include <linux/fb.h>
 #include <linux/pci.h>
+#include <linux/efi.h>
 
 #include <linux/hyperv.h>
 
@@ -212,6 +213,7 @@ struct synthvid_msg {
 
 struct hvfb_par {
 	struct fb_info *info;
+	struct resource mem;
 	bool fb_ready; /* fb device is ready */
 	struct completion wait;
 	u32 synthvid_version;
@@ -460,13 +462,13 @@ static int synthvid_connect_vsp(struct hv_device *hdev)
 		goto error;
 	}
 
-	if (par->synthvid_version == SYNTHVID_VERSION_WIN7) {
+	if (par->synthvid_version == SYNTHVID_VERSION_WIN7)
 		screen_depth = SYNTHVID_DEPTH_WIN7;
-		screen_fb_size = SYNTHVID_FB_SIZE_WIN7;
-	} else {
+	else
 		screen_depth = SYNTHVID_DEPTH_WIN8;
-		screen_fb_size = SYNTHVID_FB_SIZE_WIN8;
-	}
+
+	screen_fb_size = hdev->channel->offermsg.offer.
+				mmio_megabytes * 1024 * 1024;
 
 	return 0;
 
@@ -627,26 +629,46 @@ static void hvfb_get_option(struct fb_info *info)
 /* Get framebuffer memory from Hyper-V video pci space */
 static int hvfb_getmem(struct fb_info *info)
 {
-	struct pci_dev *pdev;
-	ulong fb_phys;
+	struct hvfb_par *par = info->par;
+	struct pci_dev *pdev  = NULL;
 	void __iomem *fb_virt;
+	int gen2vm = efi_enabled(EFI_BOOT);
+	int ret;
 
-	pdev = pci_get_device(PCI_VENDOR_ID_MICROSOFT,
+	par->mem.name = KBUILD_MODNAME;
+	par->mem.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (gen2vm) {
+		ret = allocate_resource(&hyperv_mmio, &par->mem,
+					screen_fb_size,
+					0, -1,
+					screen_fb_size,
+					NULL, NULL);
+		if (ret != 0) {
+			pr_err("Unable to allocate framebuffer memory\n");
+			return -ENODEV;
+		}
+	} else {
+		pdev = pci_get_device(PCI_VENDOR_ID_MICROSOFT,
 			      PCI_DEVICE_ID_HYPERV_VIDEO, NULL);
-	if (!pdev) {
-		pr_err("Unable to find PCI Hyper-V video\n");
-		return -ENODEV;
-	}
+		if (!pdev) {
+			pr_err("Unable to find PCI Hyper-V video\n");
+			return -ENODEV;
+		}
 
-	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM) ||
-	    pci_resource_len(pdev, 0) < screen_fb_size)
-		goto err1;
+		if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM) ||
+		    pci_resource_len(pdev, 0) < screen_fb_size)
+			goto err1;
 
-	fb_phys = pci_resource_end(pdev, 0) - screen_fb_size + 1;
-	if (!request_mem_region(fb_phys, screen_fb_size, KBUILD_MODNAME))
-		goto err1;
+		par->mem.end = pci_resource_end(pdev, 0);
+		par->mem.start = par->mem.end - screen_fb_size + 1;
+		ret = request_resource(&pdev->resource[0], &par->mem);
+		if (ret != 0) {
+			pr_err("Unable to request framebuffer memory\n");
+			goto err1;
+		}
+	}
 
-	fb_virt = ioremap(fb_phys, screen_fb_size);
+	fb_virt = ioremap(par->mem.start, screen_fb_size);
 	if (!fb_virt)
 		goto err2;
 
@@ -654,30 +676,44 @@ static int hvfb_getmem(struct fb_info *info)
 	if (!info->apertures)
 		goto err3;
 
-	info->apertures->ranges[0].base = pci_resource_start(pdev, 0);
-	info->apertures->ranges[0].size = pci_resource_len(pdev, 0);
-	info->fix.smem_start = fb_phys;
+	if (gen2vm) {
+		info->apertures->ranges[0].base = screen_info.lfb_base;
+		info->apertures->ranges[0].size = screen_info.lfb_size;
+		remove_conflicting_framebuffers(info->apertures,
+						KBUILD_MODNAME, false);
+	} else {
+		info->apertures->ranges[0].base = pci_resource_start(pdev, 0);
+		info->apertures->ranges[0].size = pci_resource_len(pdev, 0);
+	}
+
+	info->fix.smem_start = par->mem.start;
 	info->fix.smem_len = screen_fb_size;
 	info->screen_base = fb_virt;
 	info->screen_size = screen_fb_size;
 
-	pci_dev_put(pdev);
+	if (!gen2vm)
+		pci_dev_put(pdev);
+
 	return 0;
 
 err3:
 	iounmap(fb_virt);
 err2:
-	release_mem_region(fb_phys, screen_fb_size);
+	release_resource(&par->mem);
 err1:
-	pci_dev_put(pdev);
+	if (!gen2vm)
+		pci_dev_put(pdev);
+
 	return -ENOMEM;
 }
 
 /* Release the framebuffer */
 static void hvfb_putmem(struct fb_info *info)
 {
+	struct hvfb_par *par = info->par;
+
 	iounmap(info->screen_base);
-	release_mem_region(info->fix.smem_start, screen_fb_size);
+	release_resource(&par->mem);
 }
 
 
diff --git a/drivers/video/i740_reg.h b/drivers/video/fbdev/i740_reg.h
index 91bac76549d7..91bac76549d7 100644
--- a/drivers/video/i740_reg.h
+++ b/drivers/video/fbdev/i740_reg.h
diff --git a/drivers/video/i740fb.c b/drivers/video/fbdev/i740fb.c
index ca7c9df193b0..ca7c9df193b0 100644
--- a/drivers/video/i740fb.c
+++ b/drivers/video/fbdev/i740fb.c
diff --git a/drivers/video/i810/Makefile b/drivers/video/fbdev/i810/Makefile
index 96e08c8ded97..96e08c8ded97 100644
--- a/drivers/video/i810/Makefile
+++ b/drivers/video/fbdev/i810/Makefile
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/fbdev/i810/i810-i2c.c
index 7db17d0d8a8c..7db17d0d8a8c 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/fbdev/i810/i810-i2c.c
diff --git a/drivers/video/i810/i810.h b/drivers/video/fbdev/i810/i810.h
index 1414b73ac55b..1414b73ac55b 100644
--- a/drivers/video/i810/i810.h
+++ b/drivers/video/fbdev/i810/i810.h
diff --git a/drivers/video/i810/i810_accel.c b/drivers/video/fbdev/i810/i810_accel.c
index 7672d2ea9b35..7672d2ea9b35 100644
--- a/drivers/video/i810/i810_accel.c
+++ b/drivers/video/fbdev/i810/i810_accel.c
diff --git a/drivers/video/i810/i810_dvt.c b/drivers/video/fbdev/i810/i810_dvt.c
index b4b3670667ab..b4b3670667ab 100644
--- a/drivers/video/i810/i810_dvt.c
+++ b/drivers/video/fbdev/i810/i810_dvt.c
diff --git a/drivers/video/i810/i810_gtf.c b/drivers/video/fbdev/i810/i810_gtf.c
index 9743d51e7f8c..9743d51e7f8c 100644
--- a/drivers/video/i810/i810_gtf.c
+++ b/drivers/video/fbdev/i810/i810_gtf.c
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/fbdev/i810/i810_main.c
index bb674e431741..bb674e431741 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/fbdev/i810/i810_main.c
diff --git a/drivers/video/i810/i810_main.h b/drivers/video/fbdev/i810/i810_main.h
index a25afaa534ba..a25afaa534ba 100644
--- a/drivers/video/i810/i810_main.h
+++ b/drivers/video/fbdev/i810/i810_main.h
diff --git a/drivers/video/i810/i810_regs.h b/drivers/video/fbdev/i810/i810_regs.h
index 91c6bd9d0d0d..91c6bd9d0d0d 100644
--- a/drivers/video/i810/i810_regs.h
+++ b/drivers/video/fbdev/i810/i810_regs.h
diff --git a/drivers/video/igafb.c b/drivers/video/fbdev/igafb.c
index 486f18897414..486f18897414 100644
--- a/drivers/video/igafb.c
+++ b/drivers/video/fbdev/igafb.c
diff --git a/drivers/video/imsttfb.c b/drivers/video/fbdev/imsttfb.c
index aae10ce74f14..aae10ce74f14 100644
--- a/drivers/video/imsttfb.c
+++ b/drivers/video/fbdev/imsttfb.c
diff --git a/drivers/video/imxfb.c b/drivers/video/fbdev/imxfb.c
index 44ee678481d5..f6e621684953 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/fbdev/imxfb.c
@@ -30,10 +30,13 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
+#include <linux/lcd.h>
 #include <linux/math64.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 
+#include <linux/regulator/consumer.h>
+
 #include <video/of_display_timing.h>
 #include <video/of_videomode.h>
 #include <video/videomode.h>
@@ -45,12 +48,6 @@
  */
 #define DEBUG_VAR 1
 
-#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
-	(defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) && \
-		defined(CONFIG_FB_IMX_MODULE))
-#define PWMR_BACKLIGHT_AVAILABLE
-#endif
-
 #define DRIVER_NAME "imx-fb"
 
 #define LCDC_SSA	0x00
@@ -153,11 +150,8 @@ struct imxfb_info {
 	 * the framebuffer memory region to.
 	 */
 	dma_addr_t		map_dma;
-	u_char			*map_cpu;
 	u_int			map_size;
 
-	u_char			*screen_cpu;
-	dma_addr_t		screen_dma;
 	u_int			palette_size;
 
 	dma_addr_t		dbar1;
@@ -167,18 +161,13 @@ struct imxfb_info {
 	u_int			pwmr;
 	u_int			lscr1;
 	u_int			dmacr;
-	u_int			cmap_inverse:1,
-				cmap_static:1,
-				unused:30;
+	bool			cmap_inverse;
+	bool			cmap_static;
 
 	struct imx_fb_videomode *mode;
 	int			num_modes;
-#ifdef PWMR_BACKLIGHT_AVAILABLE
-	struct backlight_device *bl;
-#endif
 
-	void (*lcd_power)(int);
-	void (*backlight_power)(int);
+	struct regulator	*lcd_pwr;
 };
 
 static struct platform_device_id imxfb_devtype[] = {
@@ -484,83 +473,6 @@ static int imxfb_set_par(struct fb_info *info)
 	return 0;
 }
 
-#ifdef PWMR_BACKLIGHT_AVAILABLE
-static int imxfb_bl_get_brightness(struct backlight_device *bl)
-{
-	struct imxfb_info *fbi = bl_get_data(bl);
-
-	return readl(fbi->regs + LCDC_PWMR) & 0xFF;
-}
-
-static int imxfb_bl_update_status(struct backlight_device *bl)
-{
-	struct imxfb_info *fbi = bl_get_data(bl);
-	int brightness = bl->props.brightness;
-
-	if (!fbi->pwmr)
-		return 0;
-
-	if (bl->props.power != FB_BLANK_UNBLANK)
-		brightness = 0;
-	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
-		brightness = 0;
-
-	fbi->pwmr = (fbi->pwmr & ~0xFF) | brightness;
-
-	if (bl->props.fb_blank != FB_BLANK_UNBLANK) {
-		clk_prepare_enable(fbi->clk_ipg);
-		clk_prepare_enable(fbi->clk_ahb);
-		clk_prepare_enable(fbi->clk_per);
-	}
-	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
-	if (bl->props.fb_blank != FB_BLANK_UNBLANK) {
-		clk_disable_unprepare(fbi->clk_per);
-		clk_disable_unprepare(fbi->clk_ahb);
-		clk_disable_unprepare(fbi->clk_ipg);
-	}
-
-	return 0;
-}
-
-static const struct backlight_ops imxfb_lcdc_bl_ops = {
-	.update_status = imxfb_bl_update_status,
-	.get_brightness = imxfb_bl_get_brightness,
-};
-
-static void imxfb_init_backlight(struct imxfb_info *fbi)
-{
-	struct backlight_properties props;
-	struct backlight_device	*bl;
-
-	if (fbi->bl)
-		return;
-
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.max_brightness = 0xff;
-	props.type = BACKLIGHT_RAW;
-	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
-
-	bl = backlight_device_register("imxfb-bl", &fbi->pdev->dev, fbi,
-				       &imxfb_lcdc_bl_ops, &props);
-	if (IS_ERR(bl)) {
-		dev_err(&fbi->pdev->dev, "error %ld on backlight register\n",
-				PTR_ERR(bl));
-		return;
-	}
-
-	fbi->bl = bl;
-	bl->props.power = FB_BLANK_UNBLANK;
-	bl->props.fb_blank = FB_BLANK_UNBLANK;
-	bl->props.brightness = imxfb_bl_get_brightness(bl);
-}
-
-static void imxfb_exit_backlight(struct imxfb_info *fbi)
-{
-	if (fbi->bl)
-		backlight_device_unregister(fbi->bl);
-}
-#endif
-
 static void imxfb_enable_controller(struct imxfb_info *fbi)
 {
 
@@ -569,7 +481,7 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
 
 	pr_debug("Enabling LCD controller\n");
 
-	writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
+	writel(fbi->map_dma, fbi->regs + LCDC_SSA);
 
 	/* panning offset 0 (0 pixel offset)        */
 	writel(0x00000000, fbi->regs + LCDC_POS);
@@ -588,11 +500,6 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
 	clk_prepare_enable(fbi->clk_ahb);
 	clk_prepare_enable(fbi->clk_per);
 	fbi->enabled = true;
-
-	if (fbi->backlight_power)
-		fbi->backlight_power(1);
-	if (fbi->lcd_power)
-		fbi->lcd_power(1);
 }
 
 static void imxfb_disable_controller(struct imxfb_info *fbi)
@@ -602,11 +509,6 @@ static void imxfb_disable_controller(struct imxfb_info *fbi)
 
 	pr_debug("Disabling LCD controller\n");
 
-	if (fbi->backlight_power)
-		fbi->backlight_power(0);
-	if (fbi->lcd_power)
-		fbi->lcd_power(0);
-
 	clk_disable_unprepare(fbi->clk_per);
 	clk_disable_unprepare(fbi->clk_ipg);
 	clk_disable_unprepare(fbi->clk_ahb);
@@ -709,10 +611,8 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 			fbi->regs + LCDC_SIZE);
 
 	writel(fbi->pcr, fbi->regs + LCDC_PCR);
-#ifndef PWMR_BACKLIGHT_AVAILABLE
 	if (fbi->pwmr)
 		writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
-#endif
 	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
 
 	/* dmacr = 0 is no valid value, as we need DMA control marks. */
@@ -722,37 +622,6 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 	return 0;
 }
 
-#ifdef CONFIG_PM
-/*
- * Power management hooks.  Note that we won't be called from IRQ context,
- * unlike the blank functions above, so we may sleep.
- */
-static int imxfb_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct fb_info *info = platform_get_drvdata(dev);
-	struct imxfb_info *fbi = info->par;
-
-	pr_debug("%s\n", __func__);
-
-	imxfb_disable_controller(fbi);
-	return 0;
-}
-
-static int imxfb_resume(struct platform_device *dev)
-{
-	struct fb_info *info = platform_get_drvdata(dev);
-	struct imxfb_info *fbi = info->par;
-
-	pr_debug("%s\n", __func__);
-
-	imxfb_enable_controller(fbi);
-	return 0;
-}
-#else
-#define imxfb_suspend	NULL
-#define imxfb_resume	NULL
-#endif
-
 static int imxfb_init_fbinfo(struct platform_device *pdev)
 {
 	struct imx_fb_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -790,14 +659,9 @@ static int imxfb_init_fbinfo(struct platform_device *pdev)
 	info->flags			= FBINFO_FLAG_DEFAULT |
 					  FBINFO_READS_FAST;
 	if (pdata) {
-		info->var.grayscale		= pdata->cmap_greyscale;
-		fbi->cmap_inverse		= pdata->cmap_inverse;
-		fbi->cmap_static		= pdata->cmap_static;
 		fbi->lscr1			= pdata->lscr1;
 		fbi->dmacr			= pdata->dmacr;
 		fbi->pwmr			= pdata->pwmr;
-		fbi->lcd_power			= pdata->lcd_power;
-		fbi->backlight_power		= pdata->backlight_power;
 	} else {
 		np = pdev->dev.of_node;
 		info->var.grayscale = of_property_read_bool(np,
@@ -806,14 +670,12 @@ static int imxfb_init_fbinfo(struct platform_device *pdev)
 		fbi->cmap_static = of_property_read_bool(np, "cmap-static");
 
 		fbi->lscr1 = IMXFB_LSCR1_DEFAULT;
+
+		of_property_read_u32(np, "fsl,lpccr", &fbi->pwmr);
+
 		of_property_read_u32(np, "fsl,lscr1", &fbi->lscr1);
 
 		of_property_read_u32(np, "fsl,dmacr", &fbi->dmacr);
-
-		/* These two function pointers could be used by some specific
-		 * platforms. */
-		fbi->lcd_power = NULL;
-		fbi->backlight_power = NULL;
 	}
 
 	return 0;
@@ -856,9 +718,98 @@ static int imxfb_of_read_mode(struct device *dev, struct device_node *np,
 	return 0;
 }
 
+static int imxfb_lcd_check_fb(struct lcd_device *lcddev, struct fb_info *fi)
+{
+	struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev);
+
+	if (!fi || fi->par == fbi)
+		return 1;
+
+	return 0;
+}
+
+static int imxfb_lcd_get_contrast(struct lcd_device *lcddev)
+{
+	struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev);
+
+	return fbi->pwmr & 0xff;
+}
+
+static int imxfb_lcd_set_contrast(struct lcd_device *lcddev, int contrast)
+{
+	struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev);
+
+	if (fbi->pwmr && fbi->enabled) {
+		if (contrast > 255)
+			contrast = 255;
+		else if (contrast < 0)
+			contrast = 0;
+
+		fbi->pwmr &= ~0xff;
+		fbi->pwmr |= contrast;
+
+		writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+	}
+
+	return 0;
+}
+
+static int imxfb_lcd_get_power(struct lcd_device *lcddev)
+{
+	struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev);
+
+	if (!IS_ERR(fbi->lcd_pwr))
+		return regulator_is_enabled(fbi->lcd_pwr);
+
+	return 1;
+}
+
+static int imxfb_lcd_set_power(struct lcd_device *lcddev, int power)
+{
+	struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev);
+
+	if (!IS_ERR(fbi->lcd_pwr)) {
+		if (power)
+			return regulator_enable(fbi->lcd_pwr);
+		else
+			return regulator_disable(fbi->lcd_pwr);
+	}
+
+	return 0;
+}
+
+static struct lcd_ops imxfb_lcd_ops = {
+	.check_fb	= imxfb_lcd_check_fb,
+	.get_contrast	= imxfb_lcd_get_contrast,
+	.set_contrast	= imxfb_lcd_set_contrast,
+	.get_power	= imxfb_lcd_get_power,
+	.set_power	= imxfb_lcd_set_power,
+};
+
+static int imxfb_setup(void)
+{
+	char *opt, *options = NULL;
+
+	if (fb_get_options("imxfb", &options))
+		return -ENODEV;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((opt = strsep(&options, ",")) != NULL) {
+		if (!*opt)
+			continue;
+		else
+			fb_mode = opt;
+	}
+
+	return 0;
+}
+
 static int imxfb_probe(struct platform_device *pdev)
 {
 	struct imxfb_info *fbi;
+	struct lcd_device *lcd;
 	struct fb_info *info;
 	struct imx_fb_platform_data *pdata;
 	struct resource *res;
@@ -869,6 +820,10 @@ static int imxfb_probe(struct platform_device *pdev)
 
 	dev_info(&pdev->dev, "i.MX Framebuffer driver\n");
 
+	ret = imxfb_setup();
+	if (ret < 0)
+		return ret;
+
 	of_id = of_match_device(imxfb_of_dev_id, &pdev->dev);
 	if (of_id)
 		pdev->id_entry = of_id->data;
@@ -966,32 +921,18 @@ static int imxfb_probe(struct platform_device *pdev)
 		goto failed_ioremap;
 	}
 
-	/* Seems not being used by anyone, so no support for oftree */
-	if (!pdata || !pdata->fixed_screen_cpu) {
-		fbi->map_size = PAGE_ALIGN(info->fix.smem_len);
-		fbi->map_cpu = dma_alloc_writecombine(&pdev->dev,
-				fbi->map_size, &fbi->map_dma, GFP_KERNEL);
+	fbi->map_size = PAGE_ALIGN(info->fix.smem_len);
+	info->screen_base = dma_alloc_writecombine(&pdev->dev, fbi->map_size,
+						   &fbi->map_dma, GFP_KERNEL);
 
-		if (!fbi->map_cpu) {
-			dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret);
-			ret = -ENOMEM;
-			goto failed_map;
-		}
-
-		info->screen_base = fbi->map_cpu;
-		fbi->screen_cpu = fbi->map_cpu;
-		fbi->screen_dma = fbi->map_dma;
-		info->fix.smem_start = fbi->screen_dma;
-	} else {
-		/* Fixed framebuffer mapping enables location of the screen in eSRAM */
-		fbi->map_cpu = pdata->fixed_screen_cpu;
-		fbi->map_dma = pdata->fixed_screen_dma;
-		info->screen_base = fbi->map_cpu;
-		fbi->screen_cpu = fbi->map_cpu;
-		fbi->screen_dma = fbi->map_dma;
-		info->fix.smem_start = fbi->screen_dma;
+	if (!info->screen_base) {
+		dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret);
+		ret = -ENOMEM;
+		goto failed_map;
 	}
 
+	info->fix.smem_start = fbi->map_dma;
+
 	if (pdata && pdata->init) {
 		ret = pdata->init(fbi->pdev);
 		if (ret)
@@ -1020,23 +961,37 @@ static int imxfb_probe(struct platform_device *pdev)
 		goto failed_register;
 	}
 
+	fbi->lcd_pwr = devm_regulator_get(&pdev->dev, "lcd");
+	if (IS_ERR(fbi->lcd_pwr) && (PTR_ERR(fbi->lcd_pwr) == -EPROBE_DEFER)) {
+		ret = -EPROBE_DEFER;
+		goto failed_lcd;
+	}
+
+	lcd = devm_lcd_device_register(&pdev->dev, "imxfb-lcd", &pdev->dev, fbi,
+				       &imxfb_lcd_ops);
+	if (IS_ERR(lcd)) {
+		ret = PTR_ERR(lcd);
+		goto failed_lcd;
+	}
+
+	lcd->props.max_contrast = 0xff;
+
 	imxfb_enable_controller(fbi);
 	fbi->pdev = pdev;
-#ifdef PWMR_BACKLIGHT_AVAILABLE
-	imxfb_init_backlight(fbi);
-#endif
 
 	return 0;
 
+failed_lcd:
+	unregister_framebuffer(info);
+
 failed_register:
 	fb_dealloc_cmap(&info->cmap);
 failed_cmap:
 	if (pdata && pdata->exit)
 		pdata->exit(fbi->pdev);
 failed_platform_init:
-	if (pdata && !pdata->fixed_screen_cpu)
-		dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu,
-			fbi->map_dma);
+	dma_free_writecombine(&pdev->dev, fbi->map_size, info->screen_base,
+			      fbi->map_dma);
 failed_map:
 	iounmap(fbi->regs);
 failed_ioremap:
@@ -1061,9 +1016,6 @@ static int imxfb_remove(struct platform_device *pdev)
 
 	imxfb_disable_controller(fbi);
 
-#ifdef PWMR_BACKLIGHT_AVAILABLE
-	imxfb_exit_backlight(fbi);
-#endif
 	unregister_framebuffer(info);
 
 	pdata = dev_get_platdata(&pdev->dev);
@@ -1074,69 +1026,49 @@ static int imxfb_remove(struct platform_device *pdev)
 	kfree(info->pseudo_palette);
 	framebuffer_release(info);
 
+	dma_free_writecombine(&pdev->dev, fbi->map_size, info->screen_base,
+			      fbi->map_dma);
+
 	iounmap(fbi->regs);
 	release_mem_region(res->start, resource_size(res));
 
 	return 0;
 }
 
-static void imxfb_shutdown(struct platform_device *dev)
+static int __maybe_unused imxfb_suspend(struct device *dev)
 {
-	struct fb_info *info = platform_get_drvdata(dev);
+	struct fb_info *info = dev_get_drvdata(dev);
 	struct imxfb_info *fbi = info->par;
-	imxfb_disable_controller(fbi);
-}
-
-static struct platform_driver imxfb_driver = {
-	.suspend	= imxfb_suspend,
-	.resume		= imxfb_resume,
-	.remove		= imxfb_remove,
-	.shutdown	= imxfb_shutdown,
-	.driver		= {
-		.name	= DRIVER_NAME,
-		.of_match_table = imxfb_of_dev_id,
-	},
-	.id_table	= imxfb_devtype,
-};
-
-static int imxfb_setup(void)
-{
-#ifndef MODULE
-	char *opt, *options = NULL;
 
-	if (fb_get_options("imxfb", &options))
-		return -ENODEV;
-
-	if (!options || !*options)
-		return 0;
+	imxfb_disable_controller(fbi);
 
-	while ((opt = strsep(&options, ",")) != NULL) {
-		if (!*opt)
-			continue;
-		else
-			fb_mode = opt;
-	}
-#endif
 	return 0;
 }
 
-static int __init imxfb_init(void)
+static int __maybe_unused imxfb_resume(struct device *dev)
 {
-	int ret = imxfb_setup();
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct imxfb_info *fbi = info->par;
 
-	if (ret < 0)
-		return ret;
+	imxfb_enable_controller(fbi);
 
-	return platform_driver_probe(&imxfb_driver, imxfb_probe);
+	return 0;
 }
 
-static void __exit imxfb_cleanup(void)
-{
-	platform_driver_unregister(&imxfb_driver);
-}
+static SIMPLE_DEV_PM_OPS(imxfb_pm_ops, imxfb_suspend, imxfb_resume);
 
-module_init(imxfb_init);
-module_exit(imxfb_cleanup);
+static struct platform_driver imxfb_driver = {
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.of_match_table = imxfb_of_dev_id,
+		.owner	= THIS_MODULE,
+		.pm	= &imxfb_pm_ops,
+	},
+	.probe		= imxfb_probe,
+	.remove		= imxfb_remove,
+	.id_table	= imxfb_devtype,
+};
+module_platform_driver(imxfb_driver);
 
 MODULE_DESCRIPTION("Freescale i.MX framebuffer driver");
 MODULE_AUTHOR("Sascha Hauer, Pengutronix");
diff --git a/drivers/video/intelfb/Makefile b/drivers/video/fbdev/intelfb/Makefile
index f7d631ebee8e..f7d631ebee8e 100644
--- a/drivers/video/intelfb/Makefile
+++ b/drivers/video/fbdev/intelfb/Makefile
diff --git a/drivers/video/intelfb/intelfb.h b/drivers/video/fbdev/intelfb/intelfb.h
index 6b51175629c7..6b51175629c7 100644
--- a/drivers/video/intelfb/intelfb.h
+++ b/drivers/video/fbdev/intelfb/intelfb.h
diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/fbdev/intelfb/intelfb_i2c.c
index 3300bd31d9d7..3300bd31d9d7 100644
--- a/drivers/video/intelfb/intelfb_i2c.c
+++ b/drivers/video/fbdev/intelfb/intelfb_i2c.c
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/fbdev/intelfb/intelfbdrv.c
index b847d530471a..b847d530471a 100644
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/fbdev/intelfb/intelfbdrv.c
diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/fbdev/intelfb/intelfbhw.c
index fbad61da359f..fbad61da359f 100644
--- a/drivers/video/intelfb/intelfbhw.c
+++ b/drivers/video/fbdev/intelfb/intelfbhw.c
diff --git a/drivers/video/intelfb/intelfbhw.h b/drivers/video/fbdev/intelfb/intelfbhw.h
index 216ca20f259f..216ca20f259f 100644
--- a/drivers/video/intelfb/intelfbhw.h
+++ b/drivers/video/fbdev/intelfb/intelfbhw.h
diff --git a/drivers/video/jz4740_fb.c b/drivers/video/fbdev/jz4740_fb.c
index 87790e9644d0..87790e9644d0 100644
--- a/drivers/video/jz4740_fb.c
+++ b/drivers/video/fbdev/jz4740_fb.c
diff --git a/drivers/video/kyro/Makefile b/drivers/video/fbdev/kyro/Makefile
index 2fd66f551bae..2fd66f551bae 100644
--- a/drivers/video/kyro/Makefile
+++ b/drivers/video/fbdev/kyro/Makefile
diff --git a/drivers/video/kyro/STG4000InitDevice.c b/drivers/video/fbdev/kyro/STG4000InitDevice.c
index 1d3f2080aa6f..1d3f2080aa6f 100644
--- a/drivers/video/kyro/STG4000InitDevice.c
+++ b/drivers/video/fbdev/kyro/STG4000InitDevice.c
diff --git a/drivers/video/kyro/STG4000Interface.h b/drivers/video/fbdev/kyro/STG4000Interface.h
index b7c83d5dfb13..b7c83d5dfb13 100644
--- a/drivers/video/kyro/STG4000Interface.h
+++ b/drivers/video/fbdev/kyro/STG4000Interface.h
diff --git a/drivers/video/kyro/STG4000OverlayDevice.c b/drivers/video/fbdev/kyro/STG4000OverlayDevice.c
index 0aeeaa10708b..0aeeaa10708b 100644
--- a/drivers/video/kyro/STG4000OverlayDevice.c
+++ b/drivers/video/fbdev/kyro/STG4000OverlayDevice.c
diff --git a/drivers/video/kyro/STG4000Ramdac.c b/drivers/video/fbdev/kyro/STG4000Ramdac.c
index e6ad037e4396..e6ad037e4396 100644
--- a/drivers/video/kyro/STG4000Ramdac.c
+++ b/drivers/video/fbdev/kyro/STG4000Ramdac.c
diff --git a/drivers/video/kyro/STG4000Reg.h b/drivers/video/fbdev/kyro/STG4000Reg.h
index 50f4670e9252..50f4670e9252 100644
--- a/drivers/video/kyro/STG4000Reg.h
+++ b/drivers/video/fbdev/kyro/STG4000Reg.h
diff --git a/drivers/video/kyro/STG4000VTG.c b/drivers/video/fbdev/kyro/STG4000VTG.c
index bd389709d234..bd389709d234 100644
--- a/drivers/video/kyro/STG4000VTG.c
+++ b/drivers/video/fbdev/kyro/STG4000VTG.c
diff --git a/drivers/video/kyro/fbdev.c b/drivers/video/fbdev/kyro/fbdev.c
index 65041e15fd59..65041e15fd59 100644
--- a/drivers/video/kyro/fbdev.c
+++ b/drivers/video/fbdev/kyro/fbdev.c
diff --git a/drivers/video/leo.c b/drivers/video/fbdev/leo.c
index 2c7f7d479fe2..2c7f7d479fe2 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/fbdev/leo.c
diff --git a/drivers/video/macfb.c b/drivers/video/fbdev/macfb.c
index cda7587cbc86..cda7587cbc86 100644
--- a/drivers/video/macfb.c
+++ b/drivers/video/fbdev/macfb.c
diff --git a/drivers/video/macmodes.c b/drivers/video/fbdev/macmodes.c
index af86c081d2be..af86c081d2be 100644
--- a/drivers/video/macmodes.c
+++ b/drivers/video/fbdev/macmodes.c
diff --git a/drivers/video/macmodes.h b/drivers/video/fbdev/macmodes.h
index b86ba08aac9e..b86ba08aac9e 100644
--- a/drivers/video/macmodes.h
+++ b/drivers/video/fbdev/macmodes.h
diff --git a/drivers/video/matrox/Makefile b/drivers/video/fbdev/matrox/Makefile
index f9c00ebe2530..f9c00ebe2530 100644
--- a/drivers/video/matrox/Makefile
+++ b/drivers/video/fbdev/matrox/Makefile
diff --git a/drivers/video/matrox/g450_pll.c b/drivers/video/fbdev/matrox/g450_pll.c
index c15f8a57498e..c15f8a57498e 100644
--- a/drivers/video/matrox/g450_pll.c
+++ b/drivers/video/fbdev/matrox/g450_pll.c
diff --git a/drivers/video/matrox/g450_pll.h b/drivers/video/fbdev/matrox/g450_pll.h
index aac615d18440..aac615d18440 100644
--- a/drivers/video/matrox/g450_pll.h
+++ b/drivers/video/fbdev/matrox/g450_pll.h
diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/fbdev/matrox/i2c-matroxfb.c
index 0fb280ead3dc..0fb280ead3dc 100644
--- a/drivers/video/matrox/i2c-matroxfb.c
+++ b/drivers/video/fbdev/matrox/i2c-matroxfb.c
diff --git a/drivers/video/matrox/matroxfb_DAC1064.c b/drivers/video/fbdev/matrox/matroxfb_DAC1064.c
index a01147fdf270..a01147fdf270 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.c
+++ b/drivers/video/fbdev/matrox/matroxfb_DAC1064.c
diff --git a/drivers/video/matrox/matroxfb_DAC1064.h b/drivers/video/fbdev/matrox/matroxfb_DAC1064.h
index 1e6e45b57b78..1e6e45b57b78 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.h
+++ b/drivers/video/fbdev/matrox/matroxfb_DAC1064.h
diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/fbdev/matrox/matroxfb_Ti3026.c
index 195ad7cac1ba..195ad7cac1ba 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.c
+++ b/drivers/video/fbdev/matrox/matroxfb_Ti3026.c
diff --git a/drivers/video/matrox/matroxfb_Ti3026.h b/drivers/video/fbdev/matrox/matroxfb_Ti3026.h
index 27872aaa0a17..27872aaa0a17 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.h
+++ b/drivers/video/fbdev/matrox/matroxfb_Ti3026.h
diff --git a/drivers/video/matrox/matroxfb_accel.c b/drivers/video/fbdev/matrox/matroxfb_accel.c
index 8335a6fe303e..0d5cb85d071a 100644
--- a/drivers/video/matrox/matroxfb_accel.c
+++ b/drivers/video/fbdev/matrox/matroxfb_accel.c
@@ -192,10 +192,18 @@ void matrox_cfbX_init(struct matrox_fb_info *minfo)
 	minfo->accel.m_dwg_rect = M_DWG_TRAP | M_DWG_SOLID | M_DWG_ARZERO | M_DWG_SGNZERO | M_DWG_SHIFTZERO;
 	if (isMilleniumII(minfo)) minfo->accel.m_dwg_rect |= M_DWG_TRANSC;
 	minfo->accel.m_opmode = mopmode;
+	minfo->accel.m_access = maccess;
+	minfo->accel.m_pitch = mpitch;
 }
 
 EXPORT_SYMBOL(matrox_cfbX_init);
 
+static void matrox_accel_restore_maccess(struct matrox_fb_info *minfo)
+{
+	mga_outl(M_MACCESS, minfo->accel.m_access);
+	mga_outl(M_PITCH, minfo->accel.m_pitch);
+}
+
 static void matrox_accel_bmove(struct matrox_fb_info *minfo, int vxres, int sy,
 			       int sx, int dy, int dx, int height, int width)
 {
@@ -207,7 +215,8 @@ static void matrox_accel_bmove(struct matrox_fb_info *minfo, int vxres, int sy,
 	CRITBEGIN
 
 	if ((dy < sy) || ((dy == sy) && (dx <= sx))) {
-		mga_fifo(2);
+		mga_fifo(4);
+		matrox_accel_restore_maccess(minfo);
 		mga_outl(M_DWGCTL, M_DWG_BITBLT | M_DWG_SHIFTZERO | M_DWG_SGNZERO |
 			 M_DWG_BFCOL | M_DWG_REPLACE);
 		mga_outl(M_AR5, vxres);
@@ -215,7 +224,8 @@ static void matrox_accel_bmove(struct matrox_fb_info *minfo, int vxres, int sy,
 		start = sy*vxres+sx+curr_ydstorg(minfo);
 		end = start+width;
 	} else {
-		mga_fifo(3);
+		mga_fifo(5);
+		matrox_accel_restore_maccess(minfo);
 		mga_outl(M_DWGCTL, M_DWG_BITBLT | M_DWG_SHIFTZERO | M_DWG_BFCOL | M_DWG_REPLACE);
 		mga_outl(M_SGN, 5);
 		mga_outl(M_AR5, -vxres);
@@ -224,7 +234,8 @@ static void matrox_accel_bmove(struct matrox_fb_info *minfo, int vxres, int sy,
 		start = end+width;
 		dy += height-1;
 	}
-	mga_fifo(4);
+	mga_fifo(6);
+	matrox_accel_restore_maccess(minfo);
 	mga_outl(M_AR0, end);
 	mga_outl(M_AR3, start);
 	mga_outl(M_FXBNDRY, ((dx+width)<<16) | dx);
@@ -246,7 +257,8 @@ static void matrox_accel_bmove_lin(struct matrox_fb_info *minfo, int vxres,
 	CRITBEGIN
 
 	if ((dy < sy) || ((dy == sy) && (dx <= sx))) {
-		mga_fifo(2);
+		mga_fifo(4);
+		matrox_accel_restore_maccess(minfo);
 		mga_outl(M_DWGCTL, M_DWG_BITBLT | M_DWG_SHIFTZERO | M_DWG_SGNZERO |
 			M_DWG_BFCOL | M_DWG_REPLACE);
 		mga_outl(M_AR5, vxres);
@@ -254,7 +266,8 @@ static void matrox_accel_bmove_lin(struct matrox_fb_info *minfo, int vxres,
 		start = sy*vxres+sx+curr_ydstorg(minfo);
 		end = start+width;
 	} else {
-		mga_fifo(3);
+		mga_fifo(5);
+		matrox_accel_restore_maccess(minfo);
 		mga_outl(M_DWGCTL, M_DWG_BITBLT | M_DWG_SHIFTZERO | M_DWG_BFCOL | M_DWG_REPLACE);
 		mga_outl(M_SGN, 5);
 		mga_outl(M_AR5, -vxres);
@@ -263,7 +276,8 @@ static void matrox_accel_bmove_lin(struct matrox_fb_info *minfo, int vxres,
 		start = end+width;
 		dy += height-1;
 	}
-	mga_fifo(5);
+	mga_fifo(7);
+	matrox_accel_restore_maccess(minfo);
 	mga_outl(M_AR0, end);
 	mga_outl(M_AR3, start);
 	mga_outl(M_FXBNDRY, ((dx+width)<<16) | dx);
@@ -298,7 +312,8 @@ static void matroxfb_accel_clear(struct matrox_fb_info *minfo, u_int32_t color,
 
 	CRITBEGIN
 
-	mga_fifo(5);
+	mga_fifo(7);
+	matrox_accel_restore_maccess(minfo);
 	mga_outl(M_DWGCTL, minfo->accel.m_dwg_rect | M_DWG_REPLACE);
 	mga_outl(M_FCOL, color);
 	mga_outl(M_FXBNDRY, ((sx + width) << 16) | sx);
@@ -341,7 +356,8 @@ static void matroxfb_cfb4_clear(struct matrox_fb_info *minfo, u_int32_t bgx,
 	width >>= 1;
 	sx >>= 1;
 	if (width) {
-		mga_fifo(5);
+		mga_fifo(7);
+		matrox_accel_restore_maccess(minfo);
 		mga_outl(M_DWGCTL, minfo->accel.m_dwg_rect | M_DWG_REPLACE2);
 		mga_outl(M_FCOL, bgx);
 		mga_outl(M_FXBNDRY, ((sx + width) << 16) | sx);
@@ -415,7 +431,8 @@ static void matroxfb_1bpp_imageblit(struct matrox_fb_info *minfo, u_int32_t fgx,
 
 	CRITBEGIN
 
-	mga_fifo(3);
+	mga_fifo(5);
+	matrox_accel_restore_maccess(minfo);
 	if (easy)
 		mga_outl(M_DWGCTL, M_DWG_ILOAD | M_DWG_SGNZERO | M_DWG_SHIFTZERO | M_DWG_BMONOWF | M_DWG_LINEAR | M_DWG_REPLACE);
 	else
@@ -425,7 +442,8 @@ static void matroxfb_1bpp_imageblit(struct matrox_fb_info *minfo, u_int32_t fgx,
 	fxbndry = ((xx + width - 1) << 16) | xx;
 	mmio = minfo->mmio.vbase;
 
-	mga_fifo(6);
+	mga_fifo(8);
+	matrox_accel_restore_maccess(minfo);
 	mga_writel(mmio, M_FXBNDRY, fxbndry);
 	mga_writel(mmio, M_AR0, ar0);
 	mga_writel(mmio, M_AR3, 0);
diff --git a/drivers/video/matrox/matroxfb_accel.h b/drivers/video/fbdev/matrox/matroxfb_accel.h
index 1e418e62c22d..1e418e62c22d 100644
--- a/drivers/video/matrox/matroxfb_accel.h
+++ b/drivers/video/fbdev/matrox/matroxfb_accel.h
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
index 87c64ff4546c..7116c5309c7d 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/fbdev/matrox/matroxfb_base.c
@@ -1773,7 +1773,8 @@ static int initMatrox2(struct matrox_fb_info *minfo, struct board *b)
 				      FBINFO_HWACCEL_FILLRECT |  /* And fillrect */
 				      FBINFO_HWACCEL_IMAGEBLIT | /* And imageblit */
 				      FBINFO_HWACCEL_XPAN |      /* And we support both horizontal */
-				      FBINFO_HWACCEL_YPAN;       /* And vertical panning */
+				      FBINFO_HWACCEL_YPAN |      /* And vertical panning */
+				      FBINFO_READS_FAST;
 	minfo->video.len_usable &= PAGE_MASK;
 	fb_alloc_cmap(&minfo->fbcon.cmap, 256, 1);
 
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/fbdev/matrox/matroxfb_base.h
index 11ed57bb704e..556d96ce40bf 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/fbdev/matrox/matroxfb_base.h
@@ -307,6 +307,8 @@ struct matrox_accel_data {
 #endif
 	u_int32_t	m_dwg_rect;
 	u_int32_t	m_opmode;
+	u_int32_t	m_access;
+	u_int32_t	m_pitch;
 };
 
 struct v4l2_queryctrl;
diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/fbdev/matrox/matroxfb_crtc2.c
index 02796a4317a9..02796a4317a9 100644
--- a/drivers/video/matrox/matroxfb_crtc2.c
+++ b/drivers/video/fbdev/matrox/matroxfb_crtc2.c
diff --git a/drivers/video/matrox/matroxfb_crtc2.h b/drivers/video/fbdev/matrox/matroxfb_crtc2.h
index 1005582e843e..1005582e843e 100644
--- a/drivers/video/matrox/matroxfb_crtc2.h
+++ b/drivers/video/fbdev/matrox/matroxfb_crtc2.h
diff --git a/drivers/video/matrox/matroxfb_g450.c b/drivers/video/fbdev/matrox/matroxfb_g450.c
index cff0546ea6fd..cff0546ea6fd 100644
--- a/drivers/video/matrox/matroxfb_g450.c
+++ b/drivers/video/fbdev/matrox/matroxfb_g450.c
diff --git a/drivers/video/matrox/matroxfb_g450.h b/drivers/video/fbdev/matrox/matroxfb_g450.h
index 3a3e654444b8..3a3e654444b8 100644
--- a/drivers/video/matrox/matroxfb_g450.h
+++ b/drivers/video/fbdev/matrox/matroxfb_g450.h
diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/fbdev/matrox/matroxfb_maven.c
index ee41a0f276b2..ee41a0f276b2 100644
--- a/drivers/video/matrox/matroxfb_maven.c
+++ b/drivers/video/fbdev/matrox/matroxfb_maven.c
diff --git a/drivers/video/matrox/matroxfb_maven.h b/drivers/video/fbdev/matrox/matroxfb_maven.h
index 99eddec9f30c..99eddec9f30c 100644
--- a/drivers/video/matrox/matroxfb_maven.h
+++ b/drivers/video/fbdev/matrox/matroxfb_maven.h
diff --git a/drivers/video/matrox/matroxfb_misc.c b/drivers/video/fbdev/matrox/matroxfb_misc.c
index 9948ca2a3046..9948ca2a3046 100644
--- a/drivers/video/matrox/matroxfb_misc.c
+++ b/drivers/video/fbdev/matrox/matroxfb_misc.c
diff --git a/drivers/video/matrox/matroxfb_misc.h b/drivers/video/fbdev/matrox/matroxfb_misc.h
index 351c823f1f74..351c823f1f74 100644
--- a/drivers/video/matrox/matroxfb_misc.h
+++ b/drivers/video/fbdev/matrox/matroxfb_misc.h
diff --git a/drivers/video/maxinefb.c b/drivers/video/fbdev/maxinefb.c
index 5cf52d3c8e75..5cf52d3c8e75 100644
--- a/drivers/video/maxinefb.c
+++ b/drivers/video/fbdev/maxinefb.c
diff --git a/drivers/video/mb862xx/Makefile b/drivers/video/fbdev/mb862xx/Makefile
index 5707ed0e31a7..5707ed0e31a7 100644
--- a/drivers/video/mb862xx/Makefile
+++ b/drivers/video/fbdev/mb862xx/Makefile
diff --git a/drivers/video/mb862xx/mb862xx-i2c.c b/drivers/video/fbdev/mb862xx/mb862xx-i2c.c
index c87e17afb3e2..c87e17afb3e2 100644
--- a/drivers/video/mb862xx/mb862xx-i2c.c
+++ b/drivers/video/fbdev/mb862xx/mb862xx-i2c.c
diff --git a/drivers/video/mb862xx/mb862xx_reg.h b/drivers/video/fbdev/mb862xx/mb862xx_reg.h
index 9df48b8edc94..9df48b8edc94 100644
--- a/drivers/video/mb862xx/mb862xx_reg.h
+++ b/drivers/video/fbdev/mb862xx/mb862xx_reg.h
diff --git a/drivers/video/mb862xx/mb862xxfb.h b/drivers/video/fbdev/mb862xx/mb862xxfb.h
index 8550630c1e01..8550630c1e01 100644
--- a/drivers/video/mb862xx/mb862xxfb.h
+++ b/drivers/video/fbdev/mb862xx/mb862xxfb.h
diff --git a/drivers/video/mb862xx/mb862xxfb_accel.c b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c
index fe92eed6da70..fe92eed6da70 100644
--- a/drivers/video/mb862xx/mb862xxfb_accel.c
+++ b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c
diff --git a/drivers/video/mb862xx/mb862xxfb_accel.h b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.h
index 96a2dfef0f60..96a2dfef0f60 100644
--- a/drivers/video/mb862xx/mb862xxfb_accel.h
+++ b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.h
diff --git a/drivers/video/mb862xx/mb862xxfbdrv.c b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c
index 0cd4c3318511..0cd4c3318511 100644
--- a/drivers/video/mb862xx/mb862xxfbdrv.c
+++ b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c
diff --git a/drivers/video/mbx/Makefile b/drivers/video/fbdev/mbx/Makefile
index 16c1165cf9c7..16c1165cf9c7 100644
--- a/drivers/video/mbx/Makefile
+++ b/drivers/video/fbdev/mbx/Makefile
diff --git a/drivers/video/mbx/mbxdebugfs.c b/drivers/video/fbdev/mbx/mbxdebugfs.c
index 4449f249b0e7..4449f249b0e7 100644
--- a/drivers/video/mbx/mbxdebugfs.c
+++ b/drivers/video/fbdev/mbx/mbxdebugfs.c
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/fbdev/mbx/mbxfb.c
index f0a5392f5fd3..f0a5392f5fd3 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/fbdev/mbx/mbxfb.c
diff --git a/drivers/video/mbx/reg_bits.h b/drivers/video/fbdev/mbx/reg_bits.h
index 5f14b4befd71..5f14b4befd71 100644
--- a/drivers/video/mbx/reg_bits.h
+++ b/drivers/video/fbdev/mbx/reg_bits.h
diff --git a/drivers/video/mbx/regs.h b/drivers/video/fbdev/mbx/regs.h
index 063099d48839..063099d48839 100644
--- a/drivers/video/mbx/regs.h
+++ b/drivers/video/fbdev/mbx/regs.h
diff --git a/drivers/video/metronomefb.c b/drivers/video/fbdev/metronomefb.c
index 195cc2db4c2c..195cc2db4c2c 100644
--- a/drivers/video/metronomefb.c
+++ b/drivers/video/fbdev/metronomefb.c
diff --git a/drivers/video/mmp/Kconfig b/drivers/video/fbdev/mmp/Kconfig
index e9ea39e13722..d4a4ffc24749 100644
--- a/drivers/video/mmp/Kconfig
+++ b/drivers/video/fbdev/mmp/Kconfig
@@ -5,7 +5,7 @@ menuconfig MMP_DISP
 	  Marvell Display Subsystem support.
 
 if MMP_DISP
-source "drivers/video/mmp/hw/Kconfig"
-source "drivers/video/mmp/panel/Kconfig"
-source "drivers/video/mmp/fb/Kconfig"
+source "drivers/video/fbdev/mmp/hw/Kconfig"
+source "drivers/video/fbdev/mmp/panel/Kconfig"
+source "drivers/video/fbdev/mmp/fb/Kconfig"
 endif
diff --git a/drivers/video/mmp/Makefile b/drivers/video/fbdev/mmp/Makefile
index a014cb358bf8..a014cb358bf8 100644
--- a/drivers/video/mmp/Makefile
+++ b/drivers/video/fbdev/mmp/Makefile
diff --git a/drivers/video/mmp/core.c b/drivers/video/fbdev/mmp/core.c
index b563b920f159..b563b920f159 100644
--- a/drivers/video/mmp/core.c
+++ b/drivers/video/fbdev/mmp/core.c
diff --git a/drivers/video/mmp/fb/Kconfig b/drivers/video/fbdev/mmp/fb/Kconfig
index 9b0141f105f5..9b0141f105f5 100644
--- a/drivers/video/mmp/fb/Kconfig
+++ b/drivers/video/fbdev/mmp/fb/Kconfig
diff --git a/drivers/video/mmp/fb/Makefile b/drivers/video/fbdev/mmp/fb/Makefile
index 709fd1f76abe..709fd1f76abe 100644
--- a/drivers/video/mmp/fb/Makefile
+++ b/drivers/video/fbdev/mmp/fb/Makefile
diff --git a/drivers/video/mmp/fb/mmpfb.c b/drivers/video/fbdev/mmp/fb/mmpfb.c
index 7ab31eb76a8c..7ab31eb76a8c 100644
--- a/drivers/video/mmp/fb/mmpfb.c
+++ b/drivers/video/fbdev/mmp/fb/mmpfb.c
diff --git a/drivers/video/mmp/fb/mmpfb.h b/drivers/video/fbdev/mmp/fb/mmpfb.h
index 88c23c10a9ec..88c23c10a9ec 100644
--- a/drivers/video/mmp/fb/mmpfb.h
+++ b/drivers/video/fbdev/mmp/fb/mmpfb.h
diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/fbdev/mmp/hw/Kconfig
index 02f109a20cd0..02f109a20cd0 100644
--- a/drivers/video/mmp/hw/Kconfig
+++ b/drivers/video/fbdev/mmp/hw/Kconfig
diff --git a/drivers/video/mmp/hw/Makefile b/drivers/video/fbdev/mmp/hw/Makefile
index 0000a714fedf..0000a714fedf 100644
--- a/drivers/video/mmp/hw/Makefile
+++ b/drivers/video/fbdev/mmp/hw/Makefile
diff --git a/drivers/video/mmp/hw/mmp_ctrl.c b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
index 8621a9f2bdcc..8621a9f2bdcc 100644
--- a/drivers/video/mmp/hw/mmp_ctrl.c
+++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
diff --git a/drivers/video/mmp/hw/mmp_ctrl.h b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
index 53301cfdb1ae..53301cfdb1ae 100644
--- a/drivers/video/mmp/hw/mmp_ctrl.h
+++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
diff --git a/drivers/video/mmp/hw/mmp_spi.c b/drivers/video/fbdev/mmp/hw/mmp_spi.c
index e62ca7bf0d5e..e62ca7bf0d5e 100644
--- a/drivers/video/mmp/hw/mmp_spi.c
+++ b/drivers/video/fbdev/mmp/hw/mmp_spi.c
diff --git a/drivers/video/mmp/panel/Kconfig b/drivers/video/fbdev/mmp/panel/Kconfig
index 4b2c4f457b11..4b2c4f457b11 100644
--- a/drivers/video/mmp/panel/Kconfig
+++ b/drivers/video/fbdev/mmp/panel/Kconfig
diff --git a/drivers/video/mmp/panel/Makefile b/drivers/video/fbdev/mmp/panel/Makefile
index 2f91611c7e5e..2f91611c7e5e 100644
--- a/drivers/video/mmp/panel/Makefile
+++ b/drivers/video/fbdev/mmp/panel/Makefile
diff --git a/drivers/video/mmp/panel/tpo_tj032md01bw.c b/drivers/video/fbdev/mmp/panel/tpo_tj032md01bw.c
index 998978b08f5e..998978b08f5e 100644
--- a/drivers/video/mmp/panel/tpo_tj032md01bw.c
+++ b/drivers/video/fbdev/mmp/panel/tpo_tj032md01bw.c
diff --git a/drivers/video/msm/Makefile b/drivers/video/fbdev/msm/Makefile
index 802d6ae523fb..802d6ae523fb 100644
--- a/drivers/video/msm/Makefile
+++ b/drivers/video/fbdev/msm/Makefile
diff --git a/drivers/video/msm/mddi.c b/drivers/video/fbdev/msm/mddi.c
index e0f8011a3c4b..e0f8011a3c4b 100644
--- a/drivers/video/msm/mddi.c
+++ b/drivers/video/fbdev/msm/mddi.c
diff --git a/drivers/video/msm/mddi_client_dummy.c b/drivers/video/fbdev/msm/mddi_client_dummy.c
index f1b0dfcc9717..f1b0dfcc9717 100644
--- a/drivers/video/msm/mddi_client_dummy.c
+++ b/drivers/video/fbdev/msm/mddi_client_dummy.c
diff --git a/drivers/video/msm/mddi_client_nt35399.c b/drivers/video/fbdev/msm/mddi_client_nt35399.c
index f96df32e5509..f96df32e5509 100644
--- a/drivers/video/msm/mddi_client_nt35399.c
+++ b/drivers/video/fbdev/msm/mddi_client_nt35399.c
diff --git a/drivers/video/msm/mddi_client_toshiba.c b/drivers/video/fbdev/msm/mddi_client_toshiba.c
index 061d7dfebbf3..061d7dfebbf3 100644
--- a/drivers/video/msm/mddi_client_toshiba.c
+++ b/drivers/video/fbdev/msm/mddi_client_toshiba.c
diff --git a/drivers/video/msm/mddi_hw.h b/drivers/video/fbdev/msm/mddi_hw.h
index 45cc01fc1e7f..45cc01fc1e7f 100644
--- a/drivers/video/msm/mddi_hw.h
+++ b/drivers/video/fbdev/msm/mddi_hw.h
diff --git a/drivers/video/msm/mdp.c b/drivers/video/fbdev/msm/mdp.c
index 113c7876c855..113c7876c855 100644
--- a/drivers/video/msm/mdp.c
+++ b/drivers/video/fbdev/msm/mdp.c
diff --git a/drivers/video/msm/mdp_csc_table.h b/drivers/video/fbdev/msm/mdp_csc_table.h
index d1cde30ead52..d1cde30ead52 100644
--- a/drivers/video/msm/mdp_csc_table.h
+++ b/drivers/video/fbdev/msm/mdp_csc_table.h
diff --git a/drivers/video/msm/mdp_hw.h b/drivers/video/fbdev/msm/mdp_hw.h
index 35848d741001..35848d741001 100644
--- a/drivers/video/msm/mdp_hw.h
+++ b/drivers/video/fbdev/msm/mdp_hw.h
diff --git a/drivers/video/msm/mdp_ppp.c b/drivers/video/fbdev/msm/mdp_ppp.c
index be6079cdfbb6..be6079cdfbb6 100644
--- a/drivers/video/msm/mdp_ppp.c
+++ b/drivers/video/fbdev/msm/mdp_ppp.c
diff --git a/drivers/video/msm/mdp_scale_tables.c b/drivers/video/fbdev/msm/mdp_scale_tables.c
index 604783b2e17c..604783b2e17c 100644
--- a/drivers/video/msm/mdp_scale_tables.c
+++ b/drivers/video/fbdev/msm/mdp_scale_tables.c
diff --git a/drivers/video/msm/mdp_scale_tables.h b/drivers/video/fbdev/msm/mdp_scale_tables.h
index 34077b1af603..34077b1af603 100644
--- a/drivers/video/msm/mdp_scale_tables.h
+++ b/drivers/video/fbdev/msm/mdp_scale_tables.h
diff --git a/drivers/video/msm/msm_fb.c b/drivers/video/fbdev/msm/msm_fb.c
index 1374803fbcd9..1374803fbcd9 100644
--- a/drivers/video/msm/msm_fb.c
+++ b/drivers/video/fbdev/msm/msm_fb.c
diff --git a/drivers/video/mx3fb.c b/drivers/video/fbdev/mx3fb.c
index 142e860fb527..142e860fb527 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/fbdev/mx3fb.c
diff --git a/drivers/video/mxsfb.c b/drivers/video/fbdev/mxsfb.c
index accf48a2cce4..accf48a2cce4 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/fbdev/mxsfb.c
diff --git a/drivers/video/n411.c b/drivers/video/fbdev/n411.c
index 935830fea7b6..935830fea7b6 100644
--- a/drivers/video/n411.c
+++ b/drivers/video/fbdev/n411.c
diff --git a/drivers/video/neofb.c b/drivers/video/fbdev/neofb.c
index 44f99a60bb9b..44f99a60bb9b 100644
--- a/drivers/video/neofb.c
+++ b/drivers/video/fbdev/neofb.c
diff --git a/drivers/video/nuc900fb.c b/drivers/video/fbdev/nuc900fb.c
index 478f9808dee4..478f9808dee4 100644
--- a/drivers/video/nuc900fb.c
+++ b/drivers/video/fbdev/nuc900fb.c
diff --git a/drivers/video/nuc900fb.h b/drivers/video/fbdev/nuc900fb.h
index 9a1ca6dbb6b2..9a1ca6dbb6b2 100644
--- a/drivers/video/nuc900fb.h
+++ b/drivers/video/fbdev/nuc900fb.h
diff --git a/drivers/video/nvidia/Makefile b/drivers/video/fbdev/nvidia/Makefile
index ca47432113e0..ca47432113e0 100644
--- a/drivers/video/nvidia/Makefile
+++ b/drivers/video/fbdev/nvidia/Makefile
diff --git a/drivers/video/nvidia/nv_accel.c b/drivers/video/fbdev/nvidia/nv_accel.c
index ad6472a894ea..ad6472a894ea 100644
--- a/drivers/video/nvidia/nv_accel.c
+++ b/drivers/video/fbdev/nvidia/nv_accel.c
diff --git a/drivers/video/nvidia/nv_backlight.c b/drivers/video/fbdev/nvidia/nv_backlight.c
index 8471008aa6ff..8471008aa6ff 100644
--- a/drivers/video/nvidia/nv_backlight.c
+++ b/drivers/video/fbdev/nvidia/nv_backlight.c
diff --git a/drivers/video/nvidia/nv_dma.h b/drivers/video/fbdev/nvidia/nv_dma.h
index a7ed1c0acbbb..a7ed1c0acbbb 100644
--- a/drivers/video/nvidia/nv_dma.h
+++ b/drivers/video/fbdev/nvidia/nv_dma.h
diff --git a/drivers/video/nvidia/nv_hw.c b/drivers/video/fbdev/nvidia/nv_hw.c
index 81c80ac3c76f..81c80ac3c76f 100644
--- a/drivers/video/nvidia/nv_hw.c
+++ b/drivers/video/fbdev/nvidia/nv_hw.c
diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/fbdev/nvidia/nv_i2c.c
index d7994a173245..d7994a173245 100644
--- a/drivers/video/nvidia/nv_i2c.c
+++ b/drivers/video/fbdev/nvidia/nv_i2c.c
diff --git a/drivers/video/nvidia/nv_local.h b/drivers/video/fbdev/nvidia/nv_local.h
index 68e508daa417..68e508daa417 100644
--- a/drivers/video/nvidia/nv_local.h
+++ b/drivers/video/fbdev/nvidia/nv_local.h
diff --git a/drivers/video/nvidia/nv_of.c b/drivers/video/fbdev/nvidia/nv_of.c
index 3bc13df4b120..3bc13df4b120 100644
--- a/drivers/video/nvidia/nv_of.c
+++ b/drivers/video/fbdev/nvidia/nv_of.c
diff --git a/drivers/video/nvidia/nv_proto.h b/drivers/video/fbdev/nvidia/nv_proto.h
index ff5c410355ea..ff5c410355ea 100644
--- a/drivers/video/nvidia/nv_proto.h
+++ b/drivers/video/fbdev/nvidia/nv_proto.h
diff --git a/drivers/video/nvidia/nv_setup.c b/drivers/video/fbdev/nvidia/nv_setup.c
index 2f2e162134fa..2f2e162134fa 100644
--- a/drivers/video/nvidia/nv_setup.c
+++ b/drivers/video/fbdev/nvidia/nv_setup.c
diff --git a/drivers/video/nvidia/nv_type.h b/drivers/video/fbdev/nvidia/nv_type.h
index c03f7f55c76d..c03f7f55c76d 100644
--- a/drivers/video/nvidia/nv_type.h
+++ b/drivers/video/fbdev/nvidia/nv_type.h
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/fbdev/nvidia/nvidia.c
index def041204676..def041204676 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/fbdev/nvidia/nvidia.c
diff --git a/drivers/video/ocfb.c b/drivers/video/fbdev/ocfb.c
index 7f9dc9bec309..7f9dc9bec309 100644
--- a/drivers/video/ocfb.c
+++ b/drivers/video/fbdev/ocfb.c
diff --git a/drivers/video/offb.c b/drivers/video/fbdev/offb.c
index 7d44d669d5b6..7d44d669d5b6 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/fbdev/offb.c
diff --git a/drivers/video/omap/Kconfig b/drivers/video/fbdev/omap/Kconfig
index 0bc3a936ce2b..0bc3a936ce2b 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/fbdev/omap/Kconfig
diff --git a/drivers/video/omap/Makefile b/drivers/video/fbdev/omap/Makefile
index 1927faffb5bc..1927faffb5bc 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/fbdev/omap/Makefile
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c
index a4ee65b8f918..a4ee65b8f918 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/fbdev/omap/hwa742.c
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/fbdev/omap/lcd_ams_delta.c
index 4a5f2cd3d3bf..4a5f2cd3d3bf 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/fbdev/omap/lcd_ams_delta.c
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/fbdev/omap/lcd_h3.c
index 49bdeca81e50..49bdeca81e50 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/fbdev/omap/lcd_h3.c
diff --git a/drivers/video/omap/lcd_htcherald.c b/drivers/video/fbdev/omap/lcd_htcherald.c
index 20f477851d54..20f477851d54 100644
--- a/drivers/video/omap/lcd_htcherald.c
+++ b/drivers/video/fbdev/omap/lcd_htcherald.c
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/fbdev/omap/lcd_inn1510.c
index 2ee423279e35..2ee423279e35 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/fbdev/omap/lcd_inn1510.c
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/fbdev/omap/lcd_inn1610.c
index e3d3d135aa48..e3d3d135aa48 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/fbdev/omap/lcd_inn1610.c
diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/fbdev/omap/lcd_mipid.c
index 803fee618d57..803fee618d57 100644
--- a/drivers/video/omap/lcd_mipid.c
+++ b/drivers/video/fbdev/omap/lcd_mipid.c
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/fbdev/omap/lcd_osk.c
index 7fbe04bce0ed..7fbe04bce0ed 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/fbdev/omap/lcd_osk.c
diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/fbdev/omap/lcd_palmte.c
index ff4fb624b904..ff4fb624b904 100644
--- a/drivers/video/omap/lcd_palmte.c
+++ b/drivers/video/fbdev/omap/lcd_palmte.c
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/fbdev/omap/lcd_palmtt.c
index aaf3c8ba1243..aaf3c8ba1243 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/fbdev/omap/lcd_palmtt.c
diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/fbdev/omap/lcd_palmz71.c
index 3b7d8aa1cf34..3b7d8aa1cf34 100644
--- a/drivers/video/omap/lcd_palmz71.c
+++ b/drivers/video/fbdev/omap/lcd_palmz71.c
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c
index b52f62595f65..b52f62595f65 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/fbdev/omap/lcdc.c
diff --git a/drivers/video/omap/lcdc.h b/drivers/video/fbdev/omap/lcdc.h
index 845222270db3..845222270db3 100644
--- a/drivers/video/omap/lcdc.h
+++ b/drivers/video/fbdev/omap/lcdc.h
diff --git a/drivers/video/omap/omapfb.h b/drivers/video/fbdev/omap/omapfb.h
index 2921d20e4fba..2921d20e4fba 100644
--- a/drivers/video/omap/omapfb.h
+++ b/drivers/video/fbdev/omap/omapfb.h
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c
index e4fc6d9b5371..e4fc6d9b5371 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/fbdev/omap/omapfb_main.c
diff --git a/drivers/video/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..d4e7684e7045 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
diff --git a/drivers/video/fbdev/omap2/Kconfig b/drivers/video/fbdev/omap2/Kconfig
new file mode 100644
index 000000000000..c22955d2de9a
--- /dev/null
+++ b/drivers/video/fbdev/omap2/Kconfig
@@ -0,0 +1,10 @@
+config OMAP2_VRFB
+	bool
+
+if ARCH_OMAP2PLUS
+
+source "drivers/video/fbdev/omap2/dss/Kconfig"
+source "drivers/video/fbdev/omap2/omapfb/Kconfig"
+source "drivers/video/fbdev/omap2/displays-new/Kconfig"
+
+endif
diff --git a/drivers/video/omap2/Makefile b/drivers/video/fbdev/omap2/Makefile
index bf8127df8c71..bf8127df8c71 100644
--- a/drivers/video/omap2/Makefile
+++ b/drivers/video/fbdev/omap2/Makefile
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/fbdev/omap2/displays-new/Kconfig
index e6cfc38160d3..e6cfc38160d3 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/fbdev/omap2/displays-new/Kconfig
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/fbdev/omap2/displays-new/Makefile
index 0323a8a1c682..0323a8a1c682 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/fbdev/omap2/displays-new/Makefile
diff --git a/drivers/video/omap2/displays-new/connector-analog-tv.c b/drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c
index ccd9073f706f..5ee3b5505f7f 100644
--- a/drivers/video/omap2/displays-new/connector-analog-tv.c
+++ b/drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c
@@ -12,6 +12,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -31,7 +32,7 @@ struct panel_drv_data {
 static const struct omap_video_timings tvc_pal_timings = {
 	.x_res		= 720,
 	.y_res		= 574,
-	.pixel_clock	= 13500,
+	.pixelclock	= 13500000,
 	.hsw		= 64,
 	.hfp		= 12,
 	.hbp		= 68,
@@ -42,6 +43,12 @@ static const struct omap_video_timings tvc_pal_timings = {
 	.interlace	= true,
 };
 
+static const struct of_device_id tvc_of_match[];
+
+struct tvc_of_data {
+	enum omap_dss_venc_type connector_type;
+};
+
 #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
 
 static int tvc_connect(struct omap_dss_device *dssdev)
@@ -91,8 +98,12 @@ static int tvc_enable(struct omap_dss_device *dssdev)
 
 	in->ops.atv->set_timings(in, &ddata->timings);
 
-	in->ops.atv->set_type(in, ddata->connector_type);
-	in->ops.atv->invert_vid_out_polarity(in, ddata->invert_polarity);
+	if (!ddata->dev->of_node) {
+		in->ops.atv->set_type(in, ddata->connector_type);
+
+		in->ops.atv->invert_vid_out_polarity(in,
+			ddata->invert_polarity);
+	}
 
 	r = in->ops.atv->enable(in);
 	if (r)
@@ -205,6 +216,23 @@ static int tvc_probe_pdata(struct platform_device *pdev)
 	return 0;
 }
 
+static int tvc_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int tvc_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -222,6 +250,10 @@ static int tvc_probe(struct platform_device *pdev)
 		r = tvc_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = tvc_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -263,12 +295,19 @@ static int __exit tvc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id tvc_of_match[] = {
+	{ .compatible = "omapdss,svideo-connector", },
+	{ .compatible = "omapdss,composite-video-connector", },
+	{},
+};
+
 static struct platform_driver tvc_connector_driver = {
 	.probe	= tvc_probe,
 	.remove	= __exit_p(tvc_remove),
 	.driver	= {
 		.name	= "connector-analog-tv",
 		.owner	= THIS_MODULE,
+		.of_match_table = tvc_of_match,
 	},
 };
 
diff --git a/drivers/video/omap2/displays-new/connector-dvi.c b/drivers/video/fbdev/omap2/displays-new/connector-dvi.c
index b6c50904038e..74de2bc50c4f 100644
--- a/drivers/video/omap2/displays-new/connector-dvi.c
+++ b/drivers/video/fbdev/omap2/displays-new/connector-dvi.c
@@ -23,7 +23,7 @@ static const struct omap_video_timings dvic_default_timings = {
 	.x_res		= 640,
 	.y_res		= 480,
 
-	.pixel_clock	= 23500,
+	.pixelclock	= 23500000,
 
 	.hfp		= 48,
 	.hsw		= 32,
@@ -277,6 +277,37 @@ static int dvic_probe_pdata(struct platform_device *pdev)
 	return 0;
 }
 
+static int dvic_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	struct device_node *adapter_node;
+	struct i2c_adapter *adapter;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
+	if (adapter_node) {
+		adapter = of_find_i2c_adapter_by_node(adapter_node);
+		if (adapter == NULL) {
+			dev_err(&pdev->dev, "failed to parse ddc-i2c-bus\n");
+			omap_dss_put_device(ddata->in);
+			return -EPROBE_DEFER;
+		}
+
+		ddata->i2c_adapter = adapter;
+	}
+
+	return 0;
+}
+
 static int dvic_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -293,6 +324,10 @@ static int dvic_probe(struct platform_device *pdev)
 		r = dvic_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = dvic_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -342,12 +377,20 @@ static int __exit dvic_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id dvic_of_match[] = {
+	{ .compatible = "omapdss,dvi-connector", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, dvic_of_match);
+
 static struct platform_driver dvi_connector_driver = {
 	.probe	= dvic_probe,
 	.remove	= __exit_p(dvic_remove),
 	.driver	= {
 		.name	= "connector-dvi",
 		.owner	= THIS_MODULE,
+		.of_match_table = dvic_of_match,
 	},
 };
 
diff --git a/drivers/video/omap2/displays-new/connector-hdmi.c b/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
index 9abe2c039ae9..29ed21b9dce5 100644
--- a/drivers/video/omap2/displays-new/connector-hdmi.c
+++ b/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
@@ -12,6 +12,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <drm/drm_edid.h>
 
@@ -21,7 +22,7 @@
 static const struct omap_video_timings hdmic_default_timings = {
 	.x_res		= 640,
 	.y_res		= 480,
-	.pixel_clock	= 25175,
+	.pixelclock	= 25175000,
 	.hsw		= 96,
 	.hfp		= 16,
 	.hbp		= 48,
@@ -301,6 +302,23 @@ static int hdmic_probe_pdata(struct platform_device *pdev)
 	return 0;
 }
 
+static int hdmic_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int hdmic_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -318,6 +336,10 @@ static int hdmic_probe(struct platform_device *pdev)
 		r = hdmic_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = hdmic_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -359,12 +381,20 @@ static int __exit hdmic_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id hdmic_of_match[] = {
+	{ .compatible = "omapdss,hdmi-connector", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, hdmic_of_match);
+
 static struct platform_driver hdmi_connector_driver = {
 	.probe	= hdmic_probe,
 	.remove	= __exit_p(hdmic_remove),
 	.driver	= {
 		.name	= "connector-hdmi",
 		.owner	= THIS_MODULE,
+		.of_match_table = hdmic_of_match,
 	},
 };
 
diff --git a/drivers/video/omap2/displays-new/encoder-tfp410.c b/drivers/video/fbdev/omap2/displays-new/encoder-tfp410.c
index 4a291e756be9..b4e9a42a79e6 100644
--- a/drivers/video/omap2/displays-new/encoder-tfp410.c
+++ b/drivers/video/fbdev/omap2/displays-new/encoder-tfp410.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/of_gpio.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -82,7 +83,8 @@ static int tfp410_enable(struct omap_dss_device *dssdev)
 		return 0;
 
 	in->ops.dpi->set_timings(in, &ddata->timings);
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
 
 	r = in->ops.dpi->enable(in);
 	if (r)
@@ -179,6 +181,33 @@ static int tfp410_probe_pdata(struct platform_device *pdev)
 	return 0;
 }
 
+static int tfp410_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int gpio;
+
+	gpio = of_get_named_gpio(node, "powerdown-gpios", 0);
+
+	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
+		ddata->pd_gpio = gpio;
+	} else {
+		dev_err(&pdev->dev, "failed to parse PD gpio\n");
+		return gpio;
+	}
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int tfp410_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -195,6 +224,10 @@ static int tfp410_probe(struct platform_device *pdev)
 		r = tfp410_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = tfp410_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -251,12 +284,20 @@ static int __exit tfp410_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id tfp410_of_match[] = {
+	{ .compatible = "omapdss,ti,tfp410", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tfp410_of_match);
+
 static struct platform_driver tfp410_driver = {
 	.probe	= tfp410_probe,
 	.remove	= __exit_p(tfp410_remove),
 	.driver	= {
 		.name	= "tfp410",
 		.owner	= THIS_MODULE,
+		.of_match_table = tfp410_of_match,
 	},
 };
 
diff --git a/drivers/video/omap2/displays-new/encoder-tpd12s015.c b/drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c
index d5c936cb217f..7e33686171e3 100644
--- a/drivers/video/omap2/displays-new/encoder-tpd12s015.c
+++ b/drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
+#include <linux/of_gpio.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -289,6 +290,49 @@ static int tpd_probe_pdata(struct platform_device *pdev)
 	return 0;
 }
 
+static int tpd_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int gpio;
+
+	/* CT CP HPD GPIO */
+	gpio = of_get_gpio(node, 0);
+	if (!gpio_is_valid(gpio)) {
+		dev_err(&pdev->dev, "failed to parse CT CP HPD gpio\n");
+		return gpio;
+	}
+	ddata->ct_cp_hpd_gpio = gpio;
+
+	/* LS OE GPIO */
+	gpio = of_get_gpio(node, 1);
+	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
+		ddata->ls_oe_gpio = gpio;
+	} else {
+		dev_err(&pdev->dev, "failed to parse LS OE gpio\n");
+		return gpio;
+	}
+
+	/* HPD GPIO */
+	gpio = of_get_gpio(node, 2);
+	if (!gpio_is_valid(gpio)) {
+		dev_err(&pdev->dev, "failed to parse HPD gpio\n");
+		return gpio;
+	}
+	ddata->hpd_gpio = gpio;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int tpd_probe(struct platform_device *pdev)
 {
 	struct omap_dss_device *in, *dssdev;
@@ -307,6 +351,10 @@ static int tpd_probe(struct platform_device *pdev)
 		r = tpd_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = tpd_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -379,12 +427,20 @@ static int __exit tpd_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id tpd_of_match[] = {
+	{ .compatible = "omapdss,ti,tpd12s015", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tpd_of_match);
+
 static struct platform_driver tpd_driver = {
 	.probe	= tpd_probe,
 	.remove	= __exit_p(tpd_remove),
 	.driver	= {
 		.name	= "tpd12s015",
 		.owner	= THIS_MODULE,
+		.of_match_table = tpd_of_match,
 	},
 };
 
diff --git a/drivers/video/omap2/displays-new/panel-dpi.c b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
index 5f8f7e7c81ef..5f8f7e7c81ef 100644
--- a/drivers/video/omap2/displays-new/panel-dpi.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
diff --git a/drivers/video/omap2/displays-new/panel-dsi-cm.c b/drivers/video/fbdev/omap2/displays-new/panel-dsi-cm.c
index b7baafe83aa3..d6f14e8717e8 100644
--- a/drivers/video/omap2/displays-new/panel-dsi-cm.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-dsi-cm.c
@@ -22,6 +22,8 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -595,10 +597,13 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
 		.lp_clk_max = 10000000,
 	};
 
-	r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
-	if (r) {
-		dev_err(&ddata->pdev->dev, "failed to configure DSI pins\n");
-		goto err0;
+	if (ddata->pin_config.num_pins > 0) {
+		r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
+		if (r) {
+			dev_err(&ddata->pdev->dev,
+				"failed to configure DSI pins\n");
+			goto err0;
+		}
 	}
 
 	r = in->ops.dsi->set_config(in, &dsi_config);
@@ -1156,6 +1161,41 @@ static int dsicm_probe_pdata(struct platform_device *pdev)
 	return 0;
 }
 
+static int dsicm_probe_of(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *in;
+	int gpio;
+
+	gpio = of_get_named_gpio(node, "reset-gpios", 0);
+	if (!gpio_is_valid(gpio)) {
+		dev_err(&pdev->dev, "failed to parse reset gpio\n");
+		return gpio;
+	}
+	ddata->reset_gpio = gpio;
+
+	gpio = of_get_named_gpio(node, "te-gpios", 0);
+	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
+		ddata->ext_te_gpio = gpio;
+	} else {
+		dev_err(&pdev->dev, "failed to parse TE gpio\n");
+		return gpio;
+	}
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	/* TODO: ulps, backlight */
+
+	return 0;
+}
+
 static int dsicm_probe(struct platform_device *pdev)
 {
 	struct backlight_properties props;
@@ -1178,13 +1218,17 @@ static int dsicm_probe(struct platform_device *pdev)
 		r = dsicm_probe_pdata(pdev);
 		if (r)
 			return r;
+	} else if (pdev->dev.of_node) {
+		r = dsicm_probe_of(pdev);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
 
 	ddata->timings.x_res = 864;
 	ddata->timings.y_res = 480;
-	ddata->timings.pixel_clock = DIV_ROUND_UP(864 * 480 * 60, 1000);
+	ddata->timings.pixelclock = 864 * 480 * 60;
 
 	dssdev = &ddata->dssdev;
 	dssdev->dev = dev;
@@ -1320,12 +1364,20 @@ static int __exit dsicm_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id dsicm_of_match[] = {
+	{ .compatible = "omapdss,panel-dsi-cm", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, dsicm_of_match);
+
 static struct platform_driver dsicm_driver = {
 	.probe = dsicm_probe,
 	.remove = __exit_p(dsicm_remove),
 	.driver = {
 		.name = "panel-dsi-cm",
 		.owner = THIS_MODULE,
+		.of_match_table = dsicm_of_match,
 	},
 };
 
diff --git a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
index 6e8977b18950..2e6b513222d9 100644
--- a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
@@ -23,7 +23,7 @@ static struct omap_video_timings lb035q02_timings = {
 	.x_res = 320,
 	.y_res = 240,
 
-	.pixel_clock	= 6500,
+	.pixelclock	= 6500000,
 
 	.hsw		= 2,
 	.hfp		= 20,
diff --git a/drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c b/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
index bb217da65c5f..996fa004b48c 100644
--- a/drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
@@ -40,7 +40,7 @@ struct panel_drv_data {
  * NEC PIX Clock Ratings
  * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
  */
-#define LCD_PIXEL_CLOCK		23800
+#define LCD_PIXEL_CLOCK		23800000
 
 static const struct {
 	unsigned char addr;
@@ -69,7 +69,7 @@ static const struct {
 static const struct omap_video_timings nec_8048_panel_timings = {
 	.x_res		= LCD_XRES,
 	.y_res		= LCD_YRES,
-	.pixel_clock	= LCD_PIXEL_CLOCK,
+	.pixelclock	= LCD_PIXEL_CLOCK,
 	.hfp		= 6,
 	.hsw		= 1,
 	.hbp		= 4,
diff --git a/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
index 72a4fb5aa6b1..b2f710be565d 100644
--- a/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
@@ -37,7 +37,7 @@ static const struct omap_video_timings sharp_ls_timings = {
 	.x_res = 480,
 	.y_res = 640,
 
-	.pixel_clock	= 19200,
+	.pixelclock	= 19200000,
 
 	.hsw		= 2,
 	.hfp		= 1,
diff --git a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c
index 8e97d06921ff..c7ba4d8b928a 100644
--- a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c
@@ -30,6 +30,8 @@
 #include <linux/backlight.h>
 #include <linux/fb.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -93,7 +95,7 @@ struct panel_drv_data {
 static const struct omap_video_timings acx565akm_panel_timings = {
 	.x_res		= 800,
 	.y_res		= 480,
-	.pixel_clock	= 24000,
+	.pixelclock	= 24000000,
 	.hfp		= 28,
 	.hsw		= 4,
 	.hbp		= 24,
@@ -547,7 +549,9 @@ static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
 	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
 
 	in->ops.sdi->set_timings(in, &ddata->videomode);
-	in->ops.sdi->set_datapairs(in, ddata->datapairs);
+
+	if (ddata->datapairs > 0)
+		in->ops.sdi->set_datapairs(in, ddata->datapairs);
 
 	r = in->ops.sdi->enable(in);
 	if (r) {
@@ -726,6 +730,22 @@ static int acx565akm_probe_pdata(struct spi_device *spi)
 	return 0;
 }
 
+static int acx565akm_probe_of(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct device_node *np = spi->dev.of_node;
+
+	ddata->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
+
+	ddata->in = omapdss_of_find_source_for_first_ep(np);
+	if (IS_ERR(ddata->in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(ddata->in);
+	}
+
+	return 0;
+}
+
 static int acx565akm_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -753,7 +773,12 @@ static int acx565akm_probe(struct spi_device *spi)
 		r = acx565akm_probe_pdata(spi);
 		if (r)
 			return r;
+	} else if (spi->dev.of_node) {
+		r = acx565akm_probe_of(spi);
+		if (r)
+			return r;
 	} else {
+		dev_err(&spi->dev, "platform data missing!\n");
 		return -ENODEV;
 	}
 
@@ -864,10 +889,16 @@ static int acx565akm_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct of_device_id acx565akm_of_match[] = {
+	{ .compatible = "omapdss,sony,acx565akm", },
+	{},
+};
+
 static struct spi_driver acx565akm_driver = {
 	.driver = {
 		.name	= "acx565akm",
 		.owner	= THIS_MODULE,
+		.of_match_table = acx565akm_of_match,
 	},
 	.probe	= acx565akm_probe,
 	.remove	= acx565akm_remove,
diff --git a/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
index 9a08908fe998..fae6adc005a7 100644
--- a/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
@@ -45,7 +45,7 @@ struct panel_drv_data {
 static struct omap_video_timings td028ttec1_panel_timings = {
 	.x_res		= 480,
 	.y_res		= 640,
-	.pixel_clock	= 22153,
+	.pixelclock	= 22153000,
 	.hfp		= 24,
 	.hsw		= 8,
 	.hbp		= 8,
diff --git a/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
index eadc6529fa3d..875b40263b33 100644
--- a/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
@@ -76,7 +76,7 @@ static const struct omap_video_timings tpo_td043_timings = {
 	.x_res		= 800,
 	.y_res		= 480,
 
-	.pixel_clock	= 36000,
+	.pixelclock	= 36000000,
 
 	.hsw		= 1,
 	.hfp		= 68,
diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/fbdev/omap2/dss/Kconfig
index dde4281663b1..dde4281663b1 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/fbdev/omap2/dss/Kconfig
diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/fbdev/omap2/dss/Makefile
index d3aa91bdd6a8..8aec8bda27cc 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/fbdev/omap2/dss/Makefile
@@ -1,7 +1,7 @@
 obj-$(CONFIG_OMAP2_DSS) += omapdss.o
 # Core DSS files
 omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
-	output.o
+	output.o dss-of.o
 # DSS compat layer files
 omapdss-y += manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o \
 	dispc-compat.o display-sysfs.o
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/fbdev/omap2/dss/apply.c
index 0a0b084ce65d..0a0b084ce65d 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/fbdev/omap2/dss/apply.c
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/fbdev/omap2/dss/core.c
index ffa45c894cd4..ffa45c894cd4 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/fbdev/omap2/dss/core.c
diff --git a/drivers/video/omap2/dss/dispc-compat.c b/drivers/video/fbdev/omap2/dss/dispc-compat.c
index 83779c2b292a..83779c2b292a 100644
--- a/drivers/video/omap2/dss/dispc-compat.c
+++ b/drivers/video/fbdev/omap2/dss/dispc-compat.c
diff --git a/drivers/video/omap2/dss/dispc-compat.h b/drivers/video/fbdev/omap2/dss/dispc-compat.h
index 14a69b3d4fb0..14a69b3d4fb0 100644
--- a/drivers/video/omap2/dss/dispc-compat.h
+++ b/drivers/video/fbdev/omap2/dss/dispc-compat.h
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/fbdev/omap2/dss/dispc.c
index 77d6221618f4..f18397c33e8f 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/fbdev/omap2/dss/dispc.c
@@ -100,9 +100,9 @@ static struct {
 	struct platform_device *pdev;
 	void __iomem    *base;
 
-	int		ctx_loss_cnt;
-
 	int irq;
+	irq_handler_t user_handler;
+	void *user_data;
 
 	unsigned long core_clk_rate;
 	unsigned long tv_pclk_rate;
@@ -115,6 +115,8 @@ static struct {
 	u32		ctx[DISPC_SZ_REGS / sizeof(u32)];
 
 	const struct dispc_features *feat;
+
+	bool is_enabled;
 } dispc;
 
 enum omap_color_component {
@@ -143,12 +145,18 @@ enum mgr_reg_fields {
 	DISPC_MGR_FLD_NUM,
 };
 
+struct dispc_reg_field {
+	u16 reg;
+	u8 high;
+	u8 low;
+};
+
 static const struct {
 	const char *name;
 	u32 vsync_irq;
 	u32 framedone_irq;
 	u32 sync_lost_irq;
-	struct reg_field reg_desc[DISPC_MGR_FLD_NUM];
+	struct dispc_reg_field reg_desc[DISPC_MGR_FLD_NUM];
 } mgr_desc[] = {
 	[OMAP_DSS_CHANNEL_LCD] = {
 		.name		= "LCD",
@@ -240,13 +248,13 @@ static inline u32 dispc_read_reg(const u16 idx)
 
 static u32 mgr_fld_read(enum omap_channel channel, enum mgr_reg_fields regfld)
 {
-	const struct reg_field rfld = mgr_desc[channel].reg_desc[regfld];
+	const struct dispc_reg_field rfld = mgr_desc[channel].reg_desc[regfld];
 	return REG_GET(rfld.reg, rfld.high, rfld.low);
 }
 
 static void mgr_fld_write(enum omap_channel channel,
 					enum mgr_reg_fields regfld, int val) {
-	const struct reg_field rfld = mgr_desc[channel].reg_desc[regfld];
+	const struct dispc_reg_field rfld = mgr_desc[channel].reg_desc[regfld];
 	REG_FLD_MOD(rfld.reg, val, rfld.high, rfld.low);
 }
 
@@ -357,29 +365,20 @@ static void dispc_save_context(void)
 	if (dss_has_feature(FEAT_CORE_CLK_DIV))
 		SR(DIVISOR);
 
-	dispc.ctx_loss_cnt = dss_get_ctx_loss_count();
 	dispc.ctx_valid = true;
 
-	DSSDBG("context saved, ctx_loss_count %d\n", dispc.ctx_loss_cnt);
+	DSSDBG("context saved\n");
 }
 
 static void dispc_restore_context(void)
 {
-	int i, j, ctx;
+	int i, j;
 
 	DSSDBG("dispc_restore_context\n");
 
 	if (!dispc.ctx_valid)
 		return;
 
-	ctx = dss_get_ctx_loss_count();
-
-	if (ctx >= 0 && ctx == dispc.ctx_loss_cnt)
-		return;
-
-	DSSDBG("ctx_loss_count: saved %d, current %d\n",
-			dispc.ctx_loss_cnt, ctx);
-
 	/*RR(IRQENABLE);*/
 	/*RR(CONTROL);*/
 	RR(CONFIG);
@@ -2884,7 +2883,7 @@ bool dispc_mgr_timings_ok(enum omap_channel channel,
 
 	timings_ok = _dispc_mgr_size_ok(timings->x_res, timings->y_res);
 
-	timings_ok &= _dispc_mgr_pclk_ok(channel, timings->pixel_clock * 1000);
+	timings_ok &= _dispc_mgr_pclk_ok(channel, timings->pixelclock);
 
 	if (dss_mgr_is_lcd(channel)) {
 		timings_ok &= _dispc_lcd_timings_ok(timings->hsw, timings->hfp,
@@ -2979,10 +2978,10 @@ void dispc_mgr_set_timings(enum omap_channel channel,
 		xtot = t.x_res + t.hfp + t.hsw + t.hbp;
 		ytot = t.y_res + t.vfp + t.vsw + t.vbp;
 
-		ht = (timings->pixel_clock * 1000) / xtot;
-		vt = (timings->pixel_clock * 1000) / xtot / ytot;
+		ht = timings->pixelclock / xtot;
+		vt = timings->pixelclock / xtot / ytot;
 
-		DSSDBG("pck %u\n", timings->pixel_clock);
+		DSSDBG("pck %u\n", timings->pixelclock);
 		DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n",
 			t.hsw, t.hfp, t.hbp, t.vsw, t.vfp, t.vbp);
 		DSSDBG("vsync_level %d hsync_level %d data_pclk_edge %d de_level %d sync_pclk_edge %d\n",
@@ -3680,16 +3679,44 @@ static int __init dispc_init_features(struct platform_device *pdev)
 	return 0;
 }
 
+static irqreturn_t dispc_irq_handler(int irq, void *arg)
+{
+	if (!dispc.is_enabled)
+		return IRQ_NONE;
+
+	return dispc.user_handler(irq, dispc.user_data);
+}
+
 int dispc_request_irq(irq_handler_t handler, void *dev_id)
 {
-	return devm_request_irq(&dispc.pdev->dev, dispc.irq, handler,
-			     IRQF_SHARED, "OMAP DISPC", dev_id);
+	int r;
+
+	if (dispc.user_handler != NULL)
+		return -EBUSY;
+
+	dispc.user_handler = handler;
+	dispc.user_data = dev_id;
+
+	/* ensure the dispc_irq_handler sees the values above */
+	smp_wmb();
+
+	r = devm_request_irq(&dispc.pdev->dev, dispc.irq, dispc_irq_handler,
+			     IRQF_SHARED, "OMAP DISPC", &dispc);
+	if (r) {
+		dispc.user_handler = NULL;
+		dispc.user_data = NULL;
+	}
+
+	return r;
 }
 EXPORT_SYMBOL(dispc_request_irq);
 
 void dispc_free_irq(void *dev_id)
 {
-	devm_free_irq(&dispc.pdev->dev, dispc.irq, dev_id);
+	devm_free_irq(&dispc.pdev->dev, dispc.irq, &dispc);
+
+	dispc.user_handler = NULL;
+	dispc.user_data = NULL;
 }
 EXPORT_SYMBOL(dispc_free_irq);
 
@@ -3761,6 +3788,12 @@ static int __exit omap_dispchw_remove(struct platform_device *pdev)
 
 static int dispc_runtime_suspend(struct device *dev)
 {
+	dispc.is_enabled = false;
+	/* ensure the dispc_irq_handler sees the is_enabled value */
+	smp_wmb();
+	/* wait for current handler to finish before turning the DISPC off */
+	synchronize_irq(dispc.irq);
+
 	dispc_save_context();
 
 	return 0;
@@ -3768,9 +3801,21 @@ static int dispc_runtime_suspend(struct device *dev)
 
 static int dispc_runtime_resume(struct device *dev)
 {
-	_omap_dispc_initial_config();
+	/*
+	 * The reset value for load mode is 0 (OMAP_DSS_LOAD_CLUT_AND_FRAME)
+	 * but we always initialize it to 2 (OMAP_DSS_LOAD_FRAME_ONLY) in
+	 * _omap_dispc_initial_config(). We can thus use it to detect if
+	 * we have lost register context.
+	 */
+	if (REG_GET(DISPC_CONFIG, 2, 1) != OMAP_DSS_LOAD_FRAME_ONLY) {
+		_omap_dispc_initial_config();
 
-	dispc_restore_context();
+		dispc_restore_context();
+	}
+
+	dispc.is_enabled = true;
+	/* ensure the dispc_irq_handler sees the is_enabled value */
+	smp_wmb();
 
 	return 0;
 }
@@ -3780,12 +3825,20 @@ static const struct dev_pm_ops dispc_pm_ops = {
 	.runtime_resume = dispc_runtime_resume,
 };
 
+static const struct of_device_id dispc_of_match[] = {
+	{ .compatible = "ti,omap2-dispc", },
+	{ .compatible = "ti,omap3-dispc", },
+	{ .compatible = "ti,omap4-dispc", },
+	{},
+};
+
 static struct platform_driver omap_dispchw_driver = {
 	.remove         = __exit_p(omap_dispchw_remove),
 	.driver         = {
 		.name   = "omapdss_dispc",
 		.owner  = THIS_MODULE,
 		.pm	= &dispc_pm_ops,
+		.of_match_table = dispc_of_match,
 	},
 };
 
diff --git a/drivers/video/omap2/dss/dispc.h b/drivers/video/fbdev/omap2/dss/dispc.h
index 78edb449c763..78edb449c763 100644
--- a/drivers/video/omap2/dss/dispc.h
+++ b/drivers/video/fbdev/omap2/dss/dispc.h
diff --git a/drivers/video/omap2/dss/dispc_coefs.c b/drivers/video/fbdev/omap2/dss/dispc_coefs.c
index 038c15b04215..038c15b04215 100644
--- a/drivers/video/omap2/dss/dispc_coefs.c
+++ b/drivers/video/fbdev/omap2/dss/dispc_coefs.c
diff --git a/drivers/video/omap2/dss/display-sysfs.c b/drivers/video/fbdev/omap2/dss/display-sysfs.c
index f7b5f9561041..5a2095a98ed8 100644
--- a/drivers/video/omap2/dss/display-sysfs.c
+++ b/drivers/video/fbdev/omap2/dss/display-sysfs.c
@@ -132,7 +132,7 @@ static ssize_t display_timings_show(struct device *dev,
 	dssdev->driver->get_timings(dssdev, &t);
 
 	return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n",
-			t.pixel_clock,
+			t.pixelclock,
 			t.x_res, t.hfp, t.hbp, t.hsw,
 			t.y_res, t.vfp, t.vbp, t.vsw);
 }
@@ -158,7 +158,7 @@ static ssize_t display_timings_store(struct device *dev,
 	}
 #endif
 	if (!found && sscanf(buf, "%u,%hu/%hu/%hu/%hu,%hu/%hu/%hu/%hu",
-				&t.pixel_clock,
+				&t.pixelclock,
 				&t.x_res, &t.hfp, &t.hbp, &t.hsw,
 				&t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9)
 		return -EINVAL;
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/fbdev/omap2/dss/display.c
index 669a81fdf58e..2412a0dd0c13 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/fbdev/omap2/dss/display.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 #include "dss.h"
@@ -133,9 +134,32 @@ static int disp_num_counter;
 int omapdss_register_display(struct omap_dss_device *dssdev)
 {
 	struct omap_dss_driver *drv = dssdev->driver;
+	int id;
 
-	snprintf(dssdev->alias, sizeof(dssdev->alias),
-			"display%d", disp_num_counter++);
+	/*
+	 * Note: this presumes all the displays are either using DT or non-DT,
+	 * which normally should be the case. This also presumes that all
+	 * displays either have an DT alias, or none has.
+	 */
+
+	if (dssdev->dev->of_node) {
+		id = of_alias_get_id(dssdev->dev->of_node, "display");
+
+		if (id < 0)
+			id = disp_num_counter++;
+	} else {
+		id = disp_num_counter++;
+	}
+
+	snprintf(dssdev->alias, sizeof(dssdev->alias), "display%d", id);
+
+	/* Use 'label' property for name, if it exists */
+	if (dssdev->dev->of_node)
+		of_property_read_string(dssdev->dev->of_node, "label",
+			&dssdev->name);
+
+	if (dssdev->name == NULL)
+		dssdev->name = dssdev->alias;
 
 	if (drv && drv->get_resolution == NULL)
 		drv->get_resolution = omapdss_default_get_resolution;
@@ -248,7 +272,7 @@ void videomode_to_omap_video_timings(const struct videomode *vm,
 {
 	memset(ovt, 0, sizeof(*ovt));
 
-	ovt->pixel_clock = vm->pixelclock / 1000;
+	ovt->pixelclock = vm->pixelclock;
 	ovt->x_res = vm->hactive;
 	ovt->hbp = vm->hback_porch;
 	ovt->hfp = vm->hfront_porch;
@@ -280,7 +304,7 @@ void omap_video_timings_to_videomode(const struct omap_video_timings *ovt,
 {
 	memset(vm, 0, sizeof(*vm));
 
-	vm->pixelclock = ovt->pixel_clock * 1000;
+	vm->pixelclock = ovt->pixelclock;
 
 	vm->hactive = ovt->x_res;
 	vm->hback_porch = ovt->hbp;
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
index 23ef21ffc2c4..157921db447a 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/fbdev/omap2/dss/dpi.c
@@ -30,6 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/string.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 
@@ -49,6 +50,8 @@ static struct {
 	int data_lines;
 
 	struct omap_dss_device output;
+
+	bool port_initialized;
 } dpi;
 
 static struct platform_device *dpi_get_dsidev(enum omap_channel channel)
@@ -307,22 +310,21 @@ static int dpi_set_mode(struct omap_overlay_manager *mgr)
 	int r = 0;
 
 	if (dpi.dsidev)
-		r = dpi_set_dsi_clk(mgr->id, t->pixel_clock * 1000, &fck,
+		r = dpi_set_dsi_clk(mgr->id, t->pixelclock, &fck,
 				&lck_div, &pck_div);
 	else
-		r = dpi_set_dispc_clk(t->pixel_clock * 1000, &fck,
+		r = dpi_set_dispc_clk(t->pixelclock, &fck,
 				&lck_div, &pck_div);
 	if (r)
 		return r;
 
-	pck = fck / lck_div / pck_div / 1000;
+	pck = fck / lck_div / pck_div;
 
-	if (pck != t->pixel_clock) {
-		DSSWARN("Could not find exact pixel clock. "
-				"Requested %d kHz, got %lu kHz\n",
-				t->pixel_clock, pck);
+	if (pck != t->pixelclock) {
+		DSSWARN("Could not find exact pixel clock. Requested %d Hz, got %lu Hz\n",
+			t->pixelclock, pck);
 
-		t->pixel_clock = pck;
+		t->pixelclock = pck;
 	}
 
 	dss_mgr_set_timings(mgr, t);
@@ -480,17 +482,17 @@ static int dpi_check_timings(struct omap_dss_device *dssdev,
 	if (mgr && !dispc_mgr_timings_ok(mgr->id, timings))
 		return -EINVAL;
 
-	if (timings->pixel_clock == 0)
+	if (timings->pixelclock == 0)
 		return -EINVAL;
 
 	if (dpi.dsidev) {
-		ok = dpi_dsi_clk_calc(timings->pixel_clock * 1000, &ctx);
+		ok = dpi_dsi_clk_calc(timings->pixelclock, &ctx);
 		if (!ok)
 			return -EINVAL;
 
 		fck = ctx.dsi_cinfo.dsi_pll_hsdiv_dispc_clk;
 	} else {
-		ok = dpi_dss_clk_calc(timings->pixel_clock * 1000, &ctx);
+		ok = dpi_dss_clk_calc(timings->pixelclock, &ctx);
 		if (!ok)
 			return -EINVAL;
 
@@ -500,9 +502,9 @@ static int dpi_check_timings(struct omap_dss_device *dssdev,
 	lck_div = ctx.dispc_cinfo.lck_div;
 	pck_div = ctx.dispc_cinfo.pck_div;
 
-	pck = fck / lck_div / pck_div / 1000;
+	pck = fck / lck_div / pck_div;
 
-	timings->pixel_clock = pck;
+	timings->pixelclock = pck;
 
 	return 0;
 }
@@ -726,3 +728,47 @@ void __exit dpi_uninit_platform_driver(void)
 {
 	platform_driver_unregister(&omap_dpi_driver);
 }
+
+int __init dpi_init_port(struct platform_device *pdev, struct device_node *port)
+{
+	struct device_node *ep;
+	u32 datalines;
+	int r;
+
+	ep = omapdss_of_get_next_endpoint(port, NULL);
+	if (!ep)
+		return 0;
+
+	r = of_property_read_u32(ep, "data-lines", &datalines);
+	if (r) {
+		DSSERR("failed to parse datalines\n");
+		goto err_datalines;
+	}
+
+	dpi.data_lines = datalines;
+
+	of_node_put(ep);
+
+	dpi.pdev = pdev;
+
+	mutex_init(&dpi.lock);
+
+	dpi_init_output(pdev);
+
+	dpi.port_initialized = true;
+
+	return 0;
+
+err_datalines:
+	of_node_put(ep);
+
+	return r;
+}
+
+void __exit dpi_uninit_port(void)
+{
+	if (!dpi.port_initialized)
+		return;
+
+	dpi_uninit_output(dpi.pdev);
+}
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/fbdev/omap2/dss/dsi.c
index a820c37e323e..8be9b04d8849 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/fbdev/omap2/dss/dsi.c
@@ -38,6 +38,8 @@
 #include <linux/slab.h>
 #include <linux/debugfs.h>
 #include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 #include <video/omapdss.h>
 #include <video/mipi_display.h>
@@ -295,6 +297,8 @@ struct dsi_data {
 
 	int irq;
 
+	bool is_enabled;
+
 	struct clk *dss_clk;
 	struct clk *sys_clk;
 
@@ -386,6 +390,13 @@ struct dsi_packet_sent_handler_data {
 	struct completion *completion;
 };
 
+struct dsi_module_id_data {
+	u32 address;
+	int id;
+};
+
+static const struct of_device_id dsi_of_match[];
+
 #ifdef DSI_PERF_MEASURE
 static bool dsi_perf;
 module_param(dsi_perf, bool, 0644);
@@ -786,6 +797,9 @@ static irqreturn_t omap_dsi_irq_handler(int irq, void *arg)
 	dsidev = (struct platform_device *) arg;
 	dsi = dsi_get_dsidrv_data(dsidev);
 
+	if (!dsi->is_enabled)
+		return IRQ_NONE;
+
 	spin_lock(&dsi->irq_lock);
 
 	irqstatus = dsi_read_reg(dsidev, DSI_IRQSTATUS);
@@ -1151,15 +1165,11 @@ static int dsi_regulator_init(struct platform_device *dsidev)
 	if (dsi->vdds_dsi_reg != NULL)
 		return 0;
 
-	vdds_dsi = devm_regulator_get(&dsi->pdev->dev, "vdds_dsi");
-
-	/* DT HACK: try VCXIO to make omapdss work for o4 sdp/panda */
-	if (IS_ERR(vdds_dsi))
-		vdds_dsi = devm_regulator_get(&dsi->pdev->dev, "VCXIO");
+	vdds_dsi = devm_regulator_get(&dsi->pdev->dev, "vdd");
 
 	if (IS_ERR(vdds_dsi)) {
 		if (PTR_ERR(vdds_dsi) != -EPROBE_DEFER)
-			DSSERR("can't get VDDS_DSI regulator\n");
+			DSSERR("can't get DSI VDD regulator\n");
 		return PTR_ERR(vdds_dsi);
 	}
 
@@ -4616,7 +4626,7 @@ static void print_dsi_vm(const char *str,
 
 static void print_dispc_vm(const char *str, const struct omap_video_timings *t)
 {
-	unsigned long pck = t->pixel_clock * 1000;
+	unsigned long pck = t->pixelclock;
 	int hact, bl, tot;
 
 	hact = t->x_res;
@@ -4656,7 +4666,7 @@ static void print_dsi_dispc_vm(const char *str,
 	dsi_hact = DIV_ROUND_UP(DIV_ROUND_UP(t->hact * t->bitspp, 8) + 6, t->ndl);
 	dsi_htot = t->hss + t->hsa + t->hse + t->hbp + dsi_hact + t->hfp;
 
-	vm.pixel_clock = pck / 1000;
+	vm.pixelclock = pck;
 	vm.hsw = div64_u64((u64)(t->hsa + t->hse) * pck, byteclk);
 	vm.hbp = div64_u64((u64)t->hbp * pck, byteclk);
 	vm.hfp = div64_u64((u64)t->hfp * pck, byteclk);
@@ -4678,7 +4688,7 @@ static bool dsi_cm_calc_dispc_cb(int lckd, int pckd, unsigned long lck,
 	ctx->dispc_cinfo.pck = pck;
 
 	*t = *ctx->config->timings;
-	t->pixel_clock = pck / 1000;
+	t->pixelclock = pck;
 	t->x_res = ctx->config->timings->x_res;
 	t->y_res = ctx->config->timings->y_res;
 	t->hsw = t->hfp = t->hbp = t->vsw = 1;
@@ -4732,7 +4742,7 @@ static bool dsi_cm_calc(struct dsi_data *dsi,
 	 * especially as we go to LP between each pixel packet due to HW
 	 * "feature". So let's just estimate very roughly and multiply by 1.5.
 	 */
-	pck = cfg->timings->pixel_clock * 1000;
+	pck = cfg->timings->pixelclock;
 	pck = pck * 3 / 2;
 	txbyteclk = pck * bitspp / 8 / ndl;
 
@@ -4909,7 +4919,7 @@ static bool dsi_vm_calc_blanking(struct dsi_clk_calc_ctx *ctx)
 
 	dispc_vm = &ctx->dispc_vm;
 	*dispc_vm = *req_vm;
-	dispc_vm->pixel_clock = dispc_pck / 1000;
+	dispc_vm->pixelclock = dispc_pck;
 
 	if (cfg->trans_mode == OMAP_DSS_DSI_PULSE_MODE) {
 		hsa = div64_u64((u64)req_vm->hsw * dispc_pck,
@@ -5031,9 +5041,9 @@ static bool dsi_vm_calc(struct dsi_data *dsi,
 	ctx->dsi_cinfo.clkin = clkin;
 
 	/* these limits should come from the panel driver */
-	ctx->req_pck_min = t->pixel_clock * 1000 - 1000;
-	ctx->req_pck_nom = t->pixel_clock * 1000;
-	ctx->req_pck_max = t->pixel_clock * 1000 + 1000;
+	ctx->req_pck_min = t->pixelclock - 1000;
+	ctx->req_pck_nom = t->pixelclock;
+	ctx->req_pck_max = t->pixelclock + 1000;
 
 	byteclk_min = div64_u64((u64)ctx->req_pck_min * bitspp, ndl * 8);
 	pll_min = max(cfg->hs_clk_min * 4, byteclk_min * 4 * 4);
@@ -5370,12 +5380,69 @@ static void dsi_uninit_output(struct platform_device *dsidev)
 	omapdss_unregister_output(out);
 }
 
+static int dsi_probe_of(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct dsi_data *dsi = dsi_get_dsidrv_data(pdev);
+	struct property *prop;
+	u32 lane_arr[10];
+	int len, num_pins;
+	int r, i;
+	struct device_node *ep;
+	struct omap_dsi_pin_config pin_cfg;
+
+	ep = omapdss_of_get_first_endpoint(node);
+	if (!ep)
+		return 0;
+
+	prop = of_find_property(ep, "lanes", &len);
+	if (prop == NULL) {
+		dev_err(&pdev->dev, "failed to find lane data\n");
+		r = -EINVAL;
+		goto err;
+	}
+
+	num_pins = len / sizeof(u32);
+
+	if (num_pins < 4 || num_pins % 2 != 0 ||
+		num_pins > dsi->num_lanes_supported * 2) {
+		dev_err(&pdev->dev, "bad number of lanes\n");
+		r = -EINVAL;
+		goto err;
+	}
+
+	r = of_property_read_u32_array(ep, "lanes", lane_arr, num_pins);
+	if (r) {
+		dev_err(&pdev->dev, "failed to read lane data\n");
+		goto err;
+	}
+
+	pin_cfg.num_pins = num_pins;
+	for (i = 0; i < num_pins; ++i)
+		pin_cfg.pins[i] = (int)lane_arr[i];
+
+	r = dsi_configure_pins(&dsi->output, &pin_cfg);
+	if (r) {
+		dev_err(&pdev->dev, "failed to configure pins");
+		goto err;
+	}
+
+	of_node_put(ep);
+
+	return 0;
+
+err:
+	of_node_put(ep);
+	return r;
+}
+
 /* DSI1 HW IP initialisation */
 static int omap_dsihw_probe(struct platform_device *dsidev)
 {
 	u32 rev;
 	int r, i;
 	struct dsi_data *dsi;
+	struct resource *dsi_mem;
 	struct resource *res;
 	struct resource temp_res;
 
@@ -5383,7 +5450,6 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 	if (!dsi)
 		return -ENOMEM;
 
-	dsi->module_id = dsidev->id;
 	dsi->pdev = dsidev;
 	dev_set_drvdata(&dsidev->dev, dsi);
 
@@ -5421,6 +5487,8 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 		res = &temp_res;
 	}
 
+	dsi_mem = res;
+
 	dsi->proto_base = devm_ioremap(&dsidev->dev, res->start,
 		resource_size(res));
 	if (!dsi->proto_base) {
@@ -5481,6 +5549,31 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 		return r;
 	}
 
+	if (dsidev->dev.of_node) {
+		const struct of_device_id *match;
+		const struct dsi_module_id_data *d;
+
+		match = of_match_node(dsi_of_match, dsidev->dev.of_node);
+		if (!match) {
+			DSSERR("unsupported DSI module\n");
+			return -ENODEV;
+		}
+
+		d = match->data;
+
+		while (d->address != 0 && d->address != dsi_mem->start)
+			d++;
+
+		if (d->address == 0) {
+			DSSERR("unsupported DSI module\n");
+			return -ENODEV;
+		}
+
+		dsi->module_id = d->id;
+	} else {
+		dsi->module_id = dsidev->id;
+	}
+
 	/* DSI VCs initialization */
 	for (i = 0; i < ARRAY_SIZE(dsi->vc); i++) {
 		dsi->vc[i].source = DSI_VC_SOURCE_L4;
@@ -5516,6 +5609,19 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 
 	dsi_init_output(dsidev);
 
+	if (dsidev->dev.of_node) {
+		r = dsi_probe_of(dsidev);
+		if (r) {
+			DSSERR("Invalid DSI DT data\n");
+			goto err_probe_of;
+		}
+
+		r = of_platform_populate(dsidev->dev.of_node, NULL, NULL,
+			&dsidev->dev);
+		if (r)
+			DSSERR("Failed to populate DSI child devices: %d\n", r);
+	}
+
 	dsi_runtime_put(dsidev);
 
 	if (dsi->module_id == 0)
@@ -5529,17 +5635,31 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 	else if (dsi->module_id == 1)
 		dss_debugfs_create_file("dsi2_irqs", dsi2_dump_irqs);
 #endif
+
 	return 0;
 
+err_probe_of:
+	dsi_uninit_output(dsidev);
+	dsi_runtime_put(dsidev);
+
 err_runtime_get:
 	pm_runtime_disable(&dsidev->dev);
 	return r;
 }
 
+static int dsi_unregister_child(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	platform_device_unregister(pdev);
+	return 0;
+}
+
 static int __exit omap_dsihw_remove(struct platform_device *dsidev)
 {
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
+	device_for_each_child(&dsidev->dev, NULL, dsi_unregister_child);
+
 	WARN_ON(dsi->scp_clk_refcount > 0);
 
 	dsi_uninit_output(dsidev);
@@ -5556,6 +5676,15 @@ static int __exit omap_dsihw_remove(struct platform_device *dsidev)
 
 static int dsi_runtime_suspend(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(pdev);
+
+	dsi->is_enabled = false;
+	/* ensure the irq handler sees the is_enabled value */
+	smp_wmb();
+	/* wait for current handler to finish before turning the DSI off */
+	synchronize_irq(dsi->irq);
+
 	dispc_runtime_put();
 
 	return 0;
@@ -5563,12 +5692,18 @@ static int dsi_runtime_suspend(struct device *dev)
 
 static int dsi_runtime_resume(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(pdev);
 	int r;
 
 	r = dispc_runtime_get();
 	if (r)
 		return r;
 
+	dsi->is_enabled = true;
+	/* ensure the irq handler sees the is_enabled value */
+	smp_wmb();
+
 	return 0;
 }
 
@@ -5577,6 +5712,23 @@ static const struct dev_pm_ops dsi_pm_ops = {
 	.runtime_resume = dsi_runtime_resume,
 };
 
+static const struct dsi_module_id_data dsi_of_data_omap3[] = {
+	{ .address = 0x4804fc00, .id = 0, },
+	{ },
+};
+
+static const struct dsi_module_id_data dsi_of_data_omap4[] = {
+	{ .address = 0x58004000, .id = 0, },
+	{ .address = 0x58005000, .id = 1, },
+	{ },
+};
+
+static const struct of_device_id dsi_of_match[] = {
+	{ .compatible = "ti,omap3-dsi", .data = dsi_of_data_omap3, },
+	{ .compatible = "ti,omap4-dsi", .data = dsi_of_data_omap4, },
+	{},
+};
+
 static struct platform_driver omap_dsihw_driver = {
 	.probe		= omap_dsihw_probe,
 	.remove         = __exit_p(omap_dsihw_remove),
@@ -5584,6 +5736,7 @@ static struct platform_driver omap_dsihw_driver = {
 		.name   = "omapdss_dsi",
 		.owner  = THIS_MODULE,
 		.pm	= &dsi_pm_ops,
+		.of_match_table = dsi_of_match,
 	},
 };
 
diff --git a/drivers/video/fbdev/omap2/dss/dss-of.c b/drivers/video/fbdev/omap2/dss/dss-of.c
new file mode 100644
index 000000000000..a4b20aaf6142
--- /dev/null
+++ b/drivers/video/fbdev/omap2/dss/dss-of.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/seq_file.h>
+
+#include <video/omapdss.h>
+
+struct device_node *
+omapdss_of_get_next_port(const struct device_node *parent,
+			 struct device_node *prev)
+{
+	struct device_node *port = NULL;
+
+	if (!parent)
+		return NULL;
+
+	if (!prev) {
+		struct device_node *ports;
+		/*
+		 * It's the first call, we have to find a port subnode
+		 * within this node or within an optional 'ports' node.
+		 */
+		ports = of_get_child_by_name(parent, "ports");
+		if (ports)
+			parent = ports;
+
+		port = of_get_child_by_name(parent, "port");
+
+		/* release the 'ports' node */
+		of_node_put(ports);
+	} else {
+		struct device_node *ports;
+
+		ports = of_get_parent(prev);
+		if (!ports)
+			return NULL;
+
+		do {
+			port = of_get_next_child(ports, prev);
+			if (!port) {
+				of_node_put(ports);
+				return NULL;
+			}
+			prev = port;
+		} while (of_node_cmp(port->name, "port") != 0);
+	}
+
+	return port;
+}
+EXPORT_SYMBOL_GPL(omapdss_of_get_next_port);
+
+struct device_node *
+omapdss_of_get_next_endpoint(const struct device_node *parent,
+			     struct device_node *prev)
+{
+	struct device_node *ep = NULL;
+
+	if (!parent)
+		return NULL;
+
+	do {
+		ep = of_get_next_child(parent, prev);
+		if (!ep)
+			return NULL;
+		prev = ep;
+	} while (of_node_cmp(ep->name, "endpoint") != 0);
+
+	return ep;
+}
+EXPORT_SYMBOL_GPL(omapdss_of_get_next_endpoint);
+
+static struct device_node *
+omapdss_of_get_remote_device_node(const struct device_node *node)
+{
+	struct device_node *np;
+	int i;
+
+	np = of_parse_phandle(node, "remote-endpoint", 0);
+
+	if (!np)
+		return NULL;
+
+	np = of_get_next_parent(np);
+
+	for (i = 0; i < 3 && np; ++i) {
+		struct property *prop;
+
+		prop = of_find_property(np, "compatible", NULL);
+
+		if (prop)
+			return np;
+
+		np = of_get_next_parent(np);
+	}
+
+	return NULL;
+}
+
+struct device_node *
+omapdss_of_get_first_endpoint(const struct device_node *parent)
+{
+	struct device_node *port, *ep;
+
+	port = omapdss_of_get_next_port(parent, NULL);
+
+	if (!port)
+		return NULL;
+
+	ep = omapdss_of_get_next_endpoint(port, NULL);
+
+	of_node_put(port);
+
+	return ep;
+}
+EXPORT_SYMBOL_GPL(omapdss_of_get_first_endpoint);
+
+struct omap_dss_device *
+omapdss_of_find_source_for_first_ep(struct device_node *node)
+{
+	struct device_node *ep;
+	struct device_node *src_node;
+	struct omap_dss_device *src;
+
+	ep = omapdss_of_get_first_endpoint(node);
+	if (!ep)
+		return ERR_PTR(-EINVAL);
+
+	src_node = omapdss_of_get_remote_device_node(ep);
+
+	of_node_put(ep);
+
+	if (!src_node)
+		return ERR_PTR(-EINVAL);
+
+	src = omap_dss_find_output_by_node(src_node);
+
+	of_node_put(src_node);
+
+	if (!src)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return src;
+}
+EXPORT_SYMBOL_GPL(omapdss_of_find_source_for_first_ep);
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
index 9a145da35ad3..d55266c0e029 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/fbdev/omap2/dss/dss.c
@@ -23,6 +23,7 @@
 #define DSS_SUBSYS_NAME "DSS"
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/io.h>
 #include <linux/export.h>
 #include <linux/err.h>
@@ -33,6 +34,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/gfp.h>
 #include <linux/sizes.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 
@@ -154,22 +156,6 @@ static void dss_restore_context(void)
 #undef SR
 #undef RR
 
-int dss_get_ctx_loss_count(void)
-{
-	struct platform_device *core_pdev = dss_get_core_pdev();
-	struct omap_dss_board_info *board_data = core_pdev->dev.platform_data;
-	int cnt;
-
-	if (!board_data->get_context_loss_count)
-		return -ENOENT;
-
-	cnt = board_data->get_context_loss_count(&dss.pdev->dev);
-
-	WARN_ONCE(cnt < 0, "get_context_loss_count failed: %d\n", cnt);
-
-	return cnt;
-}
-
 void dss_sdi_init(int datapairs)
 {
 	u32 l;
@@ -471,7 +457,7 @@ bool dss_div_calc(unsigned long pck, unsigned long fck_min,
 	fckd_stop = max(DIV_ROUND_UP(prate * m, fck_hw_max), 1ul);
 
 	for (fckd = fckd_start; fckd >= fckd_stop; --fckd) {
-		fck = prate / fckd * m;
+		fck = DIV_ROUND_UP(prate, fckd) * m;
 
 		if (func(fck, data))
 			return true;
@@ -520,7 +506,7 @@ static int dss_setup_default_clock(void)
 
 		fck_div = DIV_ROUND_UP(prate * dss.feat->dss_fck_multiplier,
 				max_dss_fck);
-		fck = prate / fck_div * dss.feat->dss_fck_multiplier;
+		fck = DIV_ROUND_UP(prate, fck_div) * dss.feat->dss_fck_multiplier;
 	}
 
 	r = dss_set_fck_rate(fck);
@@ -788,6 +774,56 @@ static int __init dss_init_features(struct platform_device *pdev)
 	return 0;
 }
 
+static int __init dss_init_ports(struct platform_device *pdev)
+{
+	struct device_node *parent = pdev->dev.of_node;
+	struct device_node *port;
+	int r;
+
+	if (parent == NULL)
+		return 0;
+
+	port = omapdss_of_get_next_port(parent, NULL);
+	if (!port) {
+#ifdef CONFIG_OMAP2_DSS_DPI
+		dpi_init_port(pdev, parent);
+#endif
+		return 0;
+	}
+
+	do {
+		u32 reg;
+
+		r = of_property_read_u32(port, "reg", &reg);
+		if (r)
+			reg = 0;
+
+#ifdef CONFIG_OMAP2_DSS_DPI
+		if (reg == 0)
+			dpi_init_port(pdev, port);
+#endif
+
+#ifdef CONFIG_OMAP2_DSS_SDI
+		if (reg == 1)
+			sdi_init_port(pdev, port);
+#endif
+
+	} while ((port = omapdss_of_get_next_port(parent, port)) != NULL);
+
+	return 0;
+}
+
+static void dss_uninit_ports(void)
+{
+#ifdef CONFIG_OMAP2_DSS_DPI
+	dpi_uninit_port();
+#endif
+
+#ifdef CONFIG_OMAP2_DSS_SDI
+	sdi_uninit_port();
+#endif
+}
+
 /* DSS HW IP initialisation */
 static int __init omap_dsshw_probe(struct platform_device *pdev)
 {
@@ -846,6 +882,8 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
 	dss.lcd_clk_source[0] = OMAP_DSS_CLK_SRC_FCK;
 	dss.lcd_clk_source[1] = OMAP_DSS_CLK_SRC_FCK;
 
+	dss_init_ports(pdev);
+
 	rev = dss_read_reg(DSS_REVISION);
 	printk(KERN_INFO "OMAP DSS rev %d.%d\n",
 			FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
@@ -865,6 +903,8 @@ err_setup_clocks:
 
 static int __exit omap_dsshw_remove(struct platform_device *pdev)
 {
+	dss_uninit_ports();
+
 	pm_runtime_disable(&pdev->dev);
 
 	dss_put_clocks();
@@ -902,12 +942,22 @@ static const struct dev_pm_ops dss_pm_ops = {
 	.runtime_resume = dss_runtime_resume,
 };
 
+static const struct of_device_id dss_of_match[] = {
+	{ .compatible = "ti,omap2-dss", },
+	{ .compatible = "ti,omap3-dss", },
+	{ .compatible = "ti,omap4-dss", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, dss_of_match);
+
 static struct platform_driver omap_dsshw_driver = {
 	.remove         = __exit_p(omap_dsshw_remove),
 	.driver         = {
 		.name   = "omapdss_dss",
 		.owner  = THIS_MODULE,
 		.pm	= &dss_pm_ops,
+		.of_match_table = dss_of_match,
 	},
 };
 
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/fbdev/omap2/dss/dss.h
index 057f24c8a332..560078fcb198 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/fbdev/omap2/dss/dss.h
@@ -131,12 +131,6 @@ struct dsi_clock_info {
 	u16 lp_clk_div;
 };
 
-struct reg_field {
-	u16 reg;
-	u8 high;
-	u8 low;
-};
-
 struct dss_lcd_mgr_config {
 	enum dss_io_pad_mode io_pad_mode;
 
@@ -225,8 +219,6 @@ void dss_dump_clocks(struct seq_file *s);
 void dss_debug_dump_clocks(struct seq_file *s);
 #endif
 
-int dss_get_ctx_loss_count(void);
-
 void dss_sdi_init(int datapairs);
 int dss_sdi_enable(void);
 void dss_sdi_disable(void);
@@ -252,6 +244,9 @@ bool dss_div_calc(unsigned long pck, unsigned long fck_min,
 int sdi_init_platform_driver(void) __init;
 void sdi_uninit_platform_driver(void) __exit;
 
+int sdi_init_port(struct platform_device *pdev, struct device_node *port) __init;
+void sdi_uninit_port(void) __exit;
+
 /* DSI */
 
 typedef bool (*dsi_pll_calc_func)(int regn, int regm, unsigned long fint,
@@ -363,6 +358,9 @@ static inline bool dsi_pll_calc(struct platform_device *dsidev,
 int dpi_init_platform_driver(void) __init;
 void dpi_uninit_platform_driver(void) __exit;
 
+int dpi_init_port(struct platform_device *pdev, struct device_node *port) __init;
+void dpi_uninit_port(void) __exit;
+
 /* DISPC */
 int dispc_init_platform_driver(void) __init;
 void dispc_uninit_platform_driver(void) __exit;
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/fbdev/omap2/dss/dss_features.c
index 7f8969191dc6..7f8969191dc6 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/fbdev/omap2/dss/dss_features.c
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/fbdev/omap2/dss/dss_features.h
index e3ef3b714896..e3ef3b714896 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/fbdev/omap2/dss/dss_features.h
diff --git a/drivers/video/omap2/dss/hdmi.h b/drivers/video/fbdev/omap2/dss/hdmi.h
index e25681ff5a70..e25681ff5a70 100644
--- a/drivers/video/omap2/dss/hdmi.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi.h
diff --git a/drivers/video/omap2/dss/hdmi4.c b/drivers/video/fbdev/omap2/dss/hdmi4.c
index 4a74538f9ea5..f5f7944a1fd1 100644
--- a/drivers/video/omap2/dss/hdmi4.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi4.c
@@ -88,15 +88,11 @@ static int hdmi_init_regulator(void)
 	if (hdmi.vdda_hdmi_dac_reg != NULL)
 		return 0;
 
-	reg = devm_regulator_get(&hdmi.pdev->dev, "vdda_hdmi_dac");
-
-	/* DT HACK: try VDAC to make omapdss work for o4 sdp/panda */
-	if (IS_ERR(reg))
-		reg = devm_regulator_get(&hdmi.pdev->dev, "VDAC");
+	reg = devm_regulator_get(&hdmi.pdev->dev, "vdda");
 
 	if (IS_ERR(reg)) {
 		if (PTR_ERR(reg) != -EPROBE_DEFER)
-			DSSERR("can't get VDDA_HDMI_DAC regulator\n");
+			DSSERR("can't get VDDA regulator\n");
 		return PTR_ERR(reg);
 	}
 
@@ -153,7 +149,8 @@ static int hdmi_power_on_full(struct omap_dss_device *dssdev)
 
 	DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
 
-	phy = p->pixel_clock;
+	/* the functions below use kHz pixel clock. TODO: change to Hz */
+	phy = p->pixelclock / 1000;
 
 	hdmi_pll_compute(&hdmi.pll, clk_get_rate(hdmi.sys_clk), phy);
 
@@ -238,13 +235,13 @@ static void hdmi_display_set_timing(struct omap_dss_device *dssdev,
 	if (t != NULL) {
 		hdmi.cfg = *t;
 
-		dispc_set_tv_pclk(t->timings.pixel_clock * 1000);
+		dispc_set_tv_pclk(t->timings.pixelclock);
 	} else {
 		hdmi.cfg.timings = *timings;
 		hdmi.cfg.cm.code = 0;
 		hdmi.cfg.cm.mode = HDMI_DVI;
 
-		dispc_set_tv_pclk(timings->pixel_clock * 1000);
+		dispc_set_tv_pclk(timings->pixelclock);
 	}
 
 	DSSDBG("using mode: %s, code %d\n", hdmi.cfg.cm.mode == HDMI_DVI ?
@@ -509,7 +506,7 @@ static int hdmi_audio_config(struct omap_dss_device *dssdev,
 		struct omap_dss_audio *audio)
 {
 	int r;
-	u32 pclk = hdmi.cfg.timings.pixel_clock;
+	u32 pclk = hdmi.cfg.timings.pixelclock;
 
 	mutex_lock(&hdmi.lock);
 
@@ -679,6 +676,11 @@ static const struct dev_pm_ops hdmi_pm_ops = {
 	.runtime_resume = hdmi_runtime_resume,
 };
 
+static const struct of_device_id hdmi_of_match[] = {
+	{ .compatible = "ti,omap4-hdmi", },
+	{},
+};
+
 static struct platform_driver omapdss_hdmihw_driver = {
 	.probe		= omapdss_hdmihw_probe,
 	.remove         = __exit_p(omapdss_hdmihw_remove),
@@ -686,6 +688,7 @@ static struct platform_driver omapdss_hdmihw_driver = {
 		.name   = "omapdss_hdmi",
 		.owner  = THIS_MODULE,
 		.pm	= &hdmi_pm_ops,
+		.of_match_table = hdmi_of_match,
 	},
 };
 
diff --git a/drivers/video/omap2/dss/hdmi4_core.c b/drivers/video/fbdev/omap2/dss/hdmi4_core.c
index 2eb04dcf807c..2eb04dcf807c 100644
--- a/drivers/video/omap2/dss/hdmi4_core.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi4_core.c
diff --git a/drivers/video/omap2/dss/hdmi4_core.h b/drivers/video/fbdev/omap2/dss/hdmi4_core.h
index bb646896fa82..bb646896fa82 100644
--- a/drivers/video/omap2/dss/hdmi4_core.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi4_core.h
diff --git a/drivers/video/omap2/dss/hdmi_common.c b/drivers/video/fbdev/omap2/dss/hdmi_common.c
index 0614922902dd..0b12a3f62fe1 100644
--- a/drivers/video/omap2/dss/hdmi_common.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_common.c
@@ -23,91 +23,91 @@
 
 static const struct hdmi_config cea_timings[] = {
 	{
-		{ 640, 480, 25200, 96, 16, 48, 2, 10, 33,
+		{ 640, 480, 25200000, 96, 16, 48, 2, 10, 33,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 1, HDMI_HDMI },
 	},
 	{
-		{ 720, 480, 27027, 62, 16, 60, 6, 9, 30,
+		{ 720, 480, 27027000, 62, 16, 60, 6, 9, 30,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 2, HDMI_HDMI },
 	},
 	{
-		{ 1280, 720, 74250, 40, 110, 220, 5, 5, 20,
+		{ 1280, 720, 74250000, 40, 110, 220, 5, 5, 20,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 4, HDMI_HDMI },
 	},
 	{
-		{ 1920, 540, 74250, 44, 88, 148, 5, 2, 15,
+		{ 1920, 540, 74250000, 44, 88, 148, 5, 2, 15,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			true, },
 		{ 5, HDMI_HDMI },
 	},
 	{
-		{ 1440, 240, 27027, 124, 38, 114, 3, 4, 15,
+		{ 1440, 240, 27027000, 124, 38, 114, 3, 4, 15,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
 			true, },
 		{ 6, HDMI_HDMI },
 	},
 	{
-		{ 1920, 1080, 148500, 44, 88, 148, 5, 4, 36,
+		{ 1920, 1080, 148500000, 44, 88, 148, 5, 4, 36,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 16, HDMI_HDMI },
 	},
 	{
-		{ 720, 576, 27000, 64, 12, 68, 5, 5, 39,
+		{ 720, 576, 27000000, 64, 12, 68, 5, 5, 39,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 17, HDMI_HDMI },
 	},
 	{
-		{ 1280, 720, 74250, 40, 440, 220, 5, 5, 20,
+		{ 1280, 720, 74250000, 40, 440, 220, 5, 5, 20,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 19, HDMI_HDMI },
 	},
 	{
-		{ 1920, 540, 74250, 44, 528, 148, 5, 2, 15,
+		{ 1920, 540, 74250000, 44, 528, 148, 5, 2, 15,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			true, },
 		{ 20, HDMI_HDMI },
 	},
 	{
-		{ 1440, 288, 27000, 126, 24, 138, 3, 2, 19,
+		{ 1440, 288, 27000000, 126, 24, 138, 3, 2, 19,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
 			true, },
 		{ 21, HDMI_HDMI },
 	},
 	{
-		{ 1440, 576, 54000, 128, 24, 136, 5, 5, 39,
+		{ 1440, 576, 54000000, 128, 24, 136, 5, 5, 39,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 29, HDMI_HDMI },
 	},
 	{
-		{ 1920, 1080, 148500, 44, 528, 148, 5, 4, 36,
+		{ 1920, 1080, 148500000, 44, 528, 148, 5, 4, 36,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 31, HDMI_HDMI },
 	},
 	{
-		{ 1920, 1080, 74250, 44, 638, 148, 5, 4, 36,
+		{ 1920, 1080, 74250000, 44, 638, 148, 5, 4, 36,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 32, HDMI_HDMI },
 	},
 	{
-		{ 2880, 480, 108108, 248, 64, 240, 6, 9, 30,
+		{ 2880, 480, 108108000, 248, 64, 240, 6, 9, 30,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 35, HDMI_HDMI },
 	},
 	{
-		{ 2880, 576, 108000, 256, 48, 272, 5, 5, 39,
+		{ 2880, 576, 108000000, 256, 48, 272, 5, 5, 39,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 37, HDMI_HDMI },
@@ -117,121 +117,121 @@ static const struct hdmi_config cea_timings[] = {
 static const struct hdmi_config vesa_timings[] = {
 /* VESA From Here */
 	{
-		{ 640, 480, 25175, 96, 16, 48, 2, 11, 31,
+		{ 640, 480, 25175000, 96, 16, 48, 2, 11, 31,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 4, HDMI_DVI },
 	},
 	{
-		{ 800, 600, 40000, 128, 40, 88, 4, 1, 23,
+		{ 800, 600, 40000000, 128, 40, 88, 4, 1, 23,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 9, HDMI_DVI },
 	},
 	{
-		{ 848, 480, 33750, 112, 16, 112, 8, 6, 23,
+		{ 848, 480, 33750000, 112, 16, 112, 8, 6, 23,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 0xE, HDMI_DVI },
 	},
 	{
-		{ 1280, 768, 79500, 128, 64, 192, 7, 3, 20,
+		{ 1280, 768, 79500000, 128, 64, 192, 7, 3, 20,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 0x17, HDMI_DVI },
 	},
 	{
-		{ 1280, 800, 83500, 128, 72, 200, 6, 3, 22,
+		{ 1280, 800, 83500000, 128, 72, 200, 6, 3, 22,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 0x1C, HDMI_DVI },
 	},
 	{
-		{ 1360, 768, 85500, 112, 64, 256, 6, 3, 18,
+		{ 1360, 768, 85500000, 112, 64, 256, 6, 3, 18,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 0x27, HDMI_DVI },
 	},
 	{
-		{ 1280, 960, 108000, 112, 96, 312, 3, 1, 36,
+		{ 1280, 960, 108000000, 112, 96, 312, 3, 1, 36,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 0x20, HDMI_DVI },
 	},
 	{
-		{ 1280, 1024, 108000, 112, 48, 248, 3, 1, 38,
+		{ 1280, 1024, 108000000, 112, 48, 248, 3, 1, 38,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 0x23, HDMI_DVI },
 	},
 	{
-		{ 1024, 768, 65000, 136, 24, 160, 6, 3, 29,
+		{ 1024, 768, 65000000, 136, 24, 160, 6, 3, 29,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 0x10, HDMI_DVI },
 	},
 	{
-		{ 1400, 1050, 121750, 144, 88, 232, 4, 3, 32,
+		{ 1400, 1050, 121750000, 144, 88, 232, 4, 3, 32,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 0x2A, HDMI_DVI },
 	},
 	{
-		{ 1440, 900, 106500, 152, 80, 232, 6, 3, 25,
+		{ 1440, 900, 106500000, 152, 80, 232, 6, 3, 25,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 0x2F, HDMI_DVI },
 	},
 	{
-		{ 1680, 1050, 146250, 176 , 104, 280, 6, 3, 30,
+		{ 1680, 1050, 146250000, 176 , 104, 280, 6, 3, 30,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
 			false, },
 		{ 0x3A, HDMI_DVI },
 	},
 	{
-		{ 1366, 768, 85500, 143, 70, 213, 3, 3, 24,
+		{ 1366, 768, 85500000, 143, 70, 213, 3, 3, 24,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 0x51, HDMI_DVI },
 	},
 	{
-		{ 1920, 1080, 148500, 44, 148, 80, 5, 4, 36,
+		{ 1920, 1080, 148500000, 44, 148, 80, 5, 4, 36,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 0x52, HDMI_DVI },
 	},
 	{
-		{ 1280, 768, 68250, 32, 48, 80, 7, 3, 12,
+		{ 1280, 768, 68250000, 32, 48, 80, 7, 3, 12,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 0x16, HDMI_DVI },
 	},
 	{
-		{ 1400, 1050, 101000, 32, 48, 80, 4, 3, 23,
+		{ 1400, 1050, 101000000, 32, 48, 80, 4, 3, 23,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 0x29, HDMI_DVI },
 	},
 	{
-		{ 1680, 1050, 119000, 32, 48, 80, 6, 3, 21,
+		{ 1680, 1050, 119000000, 32, 48, 80, 6, 3, 21,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 0x39, HDMI_DVI },
 	},
 	{
-		{ 1280, 800, 79500, 32, 48, 80, 6, 3, 14,
+		{ 1280, 800, 79500000, 32, 48, 80, 6, 3, 14,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 0x1B, HDMI_DVI },
 	},
 	{
-		{ 1280, 720, 74250, 40, 110, 220, 5, 5, 20,
+		{ 1280, 720, 74250000, 40, 110, 220, 5, 5, 20,
 			OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 0x55, HDMI_DVI },
 	},
 	{
-		{ 1920, 1200, 154000, 32, 48, 80, 6, 3, 26,
+		{ 1920, 1200, 154000000, 32, 48, 80, 6, 3, 26,
 			OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
 			false, },
 		{ 0x44, HDMI_DVI },
@@ -277,8 +277,8 @@ static bool hdmi_timings_compare(struct omap_video_timings *timing1,
 {
 	int timing1_vsync, timing1_hsync, timing2_vsync, timing2_hsync;
 
-	if ((DIV_ROUND_CLOSEST(timing2->pixel_clock, 1000) ==
-			DIV_ROUND_CLOSEST(timing1->pixel_clock, 1000)) &&
+	if ((DIV_ROUND_CLOSEST(timing2->pixelclock, 1000000) ==
+			DIV_ROUND_CLOSEST(timing1->pixelclock, 1000000)) &&
 		(timing2->x_res == timing1->x_res) &&
 		(timing2->y_res == timing1->y_res)) {
 
@@ -347,17 +347,17 @@ int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts)
 	case 96000:
 	case 192000:
 		if (deep_color == 125)
-			if (pclk == 27027 || pclk == 74250)
+			if (pclk == 27027000 || pclk == 74250000)
 				deep_color_correct = true;
 		if (deep_color == 150)
-			if (pclk == 27027)
+			if (pclk == 27027000)
 				deep_color_correct = true;
 		break;
 	case 44100:
 	case 88200:
 	case 176400:
 		if (deep_color == 125)
-			if (pclk == 27027)
+			if (pclk == 27027000)
 				deep_color_correct = true;
 		break;
 	default:
@@ -418,7 +418,7 @@ int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts)
 		}
 	}
 	/* Calculate CTS. See HDMI 1.3a or 1.4a specifications */
-	*cts = pclk * (*n / 128) * deep_color / (sample_freq / 10);
+	*cts = (pclk/1000) * (*n / 128) * deep_color / (sample_freq / 10);
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/hdmi_phy.c b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
index dd376ce8da01..dd376ce8da01 100644
--- a/drivers/video/omap2/dss/hdmi_phy.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
diff --git a/drivers/video/omap2/dss/hdmi_pll.c b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
index 5fc71215c303..5fc71215c303 100644
--- a/drivers/video/omap2/dss/hdmi_pll.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
diff --git a/drivers/video/omap2/dss/hdmi_wp.c b/drivers/video/fbdev/omap2/dss/hdmi_wp.c
index cd620c6e43a0..f5f4ccf50d90 100644
--- a/drivers/video/omap2/dss/hdmi_wp.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_wp.c
@@ -171,6 +171,8 @@ void hdmi_wp_init_vid_fmt_timings(struct hdmi_video_format *video_fmt,
 	video_fmt->packing_mode = HDMI_PACK_10b_RGB_YUV444;
 	video_fmt->y_res = param->timings.y_res;
 	video_fmt->x_res = param->timings.x_res;
+	if (param->timings.interlace)
+		video_fmt->y_res /= 2;
 
 	timings->hbp = param->timings.hbp;
 	timings->hfp = param->timings.hfp;
diff --git a/drivers/video/omap2/dss/manager-sysfs.c b/drivers/video/fbdev/omap2/dss/manager-sysfs.c
index 37b59fe28dc8..37b59fe28dc8 100644
--- a/drivers/video/omap2/dss/manager-sysfs.c
+++ b/drivers/video/fbdev/omap2/dss/manager-sysfs.c
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/fbdev/omap2/dss/manager.c
index 1aac9b4191a9..1aac9b4191a9 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/fbdev/omap2/dss/manager.c
diff --git a/drivers/video/omap2/dss/output.c b/drivers/video/fbdev/omap2/dss/output.c
index 2ab3afa615e8..2ab3afa615e8 100644
--- a/drivers/video/omap2/dss/output.c
+++ b/drivers/video/fbdev/omap2/dss/output.c
diff --git a/drivers/video/omap2/dss/overlay-sysfs.c b/drivers/video/fbdev/omap2/dss/overlay-sysfs.c
index 4cc5ddebfb34..4cc5ddebfb34 100644
--- a/drivers/video/omap2/dss/overlay-sysfs.c
+++ b/drivers/video/fbdev/omap2/dss/overlay-sysfs.c
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/fbdev/omap2/dss/overlay.c
index 2f7cee985cdd..2f7cee985cdd 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/fbdev/omap2/dss/overlay.c
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/fbdev/omap2/dss/rfbi.c
index c8a81a2b879c..c8a81a2b879c 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/fbdev/omap2/dss/rfbi.c
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/fbdev/omap2/dss/sdi.c
index ba806c9e7f54..911dcc9173a6 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/fbdev/omap2/dss/sdi.c
@@ -26,6 +26,7 @@
 #include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/string.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 #include "dss.h"
@@ -41,6 +42,8 @@ static struct {
 	int datapairs;
 
 	struct omap_dss_device output;
+
+	bool port_initialized;
 } sdi;
 
 struct sdi_clk_calc_ctx {
@@ -149,20 +152,19 @@ static int sdi_display_enable(struct omap_dss_device *dssdev)
 	t->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
 	t->sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
 
-	r = sdi_calc_clock_div(t->pixel_clock * 1000, &fck, &dispc_cinfo);
+	r = sdi_calc_clock_div(t->pixelclock, &fck, &dispc_cinfo);
 	if (r)
 		goto err_calc_clock_div;
 
 	sdi.mgr_config.clock_info = dispc_cinfo;
 
-	pck = fck / dispc_cinfo.lck_div / dispc_cinfo.pck_div / 1000;
+	pck = fck / dispc_cinfo.lck_div / dispc_cinfo.pck_div;
 
-	if (pck != t->pixel_clock) {
-		DSSWARN("Could not find exact pixel clock. Requested %d kHz, "
-				"got %lu kHz\n",
-				t->pixel_clock, pck);
+	if (pck != t->pixelclock) {
+		DSSWARN("Could not find exact pixel clock. Requested %d Hz, got %lu Hz\n",
+			t->pixelclock, pck);
 
-		t->pixel_clock = pck;
+		t->pixelclock = pck;
 	}
 
 
@@ -244,7 +246,7 @@ static int sdi_check_timings(struct omap_dss_device *dssdev,
 	if (mgr && !dispc_mgr_timings_ok(mgr->id, timings))
 		return -EINVAL;
 
-	if (timings->pixel_clock == 0)
+	if (timings->pixelclock == 0)
 		return -EINVAL;
 
 	return 0;
@@ -387,3 +389,45 @@ void __exit sdi_uninit_platform_driver(void)
 {
 	platform_driver_unregister(&omap_sdi_driver);
 }
+
+int __init sdi_init_port(struct platform_device *pdev, struct device_node *port)
+{
+	struct device_node *ep;
+	u32 datapairs;
+	int r;
+
+	ep = omapdss_of_get_next_endpoint(port, NULL);
+	if (!ep)
+		return 0;
+
+	r = of_property_read_u32(ep, "datapairs", &datapairs);
+	if (r) {
+		DSSERR("failed to parse datapairs\n");
+		goto err_datapairs;
+	}
+
+	sdi.datapairs = datapairs;
+
+	of_node_put(ep);
+
+	sdi.pdev = pdev;
+
+	sdi_init_output(pdev);
+
+	sdi.port_initialized = true;
+
+	return 0;
+
+err_datapairs:
+	of_node_put(ep);
+
+	return r;
+}
+
+void __exit sdi_uninit_port(void)
+{
+	if (!sdi.port_initialized)
+		return;
+
+	sdi_uninit_output(sdi.pdev);
+}
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/fbdev/omap2/dss/venc.c
index 2cd7f7e42105..21d81113962b 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/fbdev/omap2/dss/venc.c
@@ -34,6 +34,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 
@@ -264,7 +265,7 @@ static const struct venc_config venc_config_pal_bdghi = {
 const struct omap_video_timings omap_dss_pal_timings = {
 	.x_res		= 720,
 	.y_res		= 574,
-	.pixel_clock	= 13500,
+	.pixelclock	= 13500000,
 	.hsw		= 64,
 	.hfp		= 12,
 	.hbp		= 68,
@@ -279,7 +280,7 @@ EXPORT_SYMBOL(omap_dss_pal_timings);
 const struct omap_video_timings omap_dss_ntsc_timings = {
 	.x_res		= 720,
 	.y_res		= 482,
-	.pixel_clock	= 13500,
+	.pixelclock	= 13500000,
 	.hsw		= 64,
 	.hfp		= 16,
 	.hbp		= 58,
@@ -636,7 +637,10 @@ static int venc_init_regulator(void)
 	if (venc.vdda_dac_reg != NULL)
 		return 0;
 
-	vdda_dac = devm_regulator_get(&venc.pdev->dev, "vdda_dac");
+	if (venc.pdev->dev.of_node)
+		vdda_dac = devm_regulator_get(&venc.pdev->dev, "vdda");
+	else
+		vdda_dac = devm_regulator_get(&venc.pdev->dev, "vdda_dac");
 
 	if (IS_ERR(vdda_dac)) {
 		if (PTR_ERR(vdda_dac) != -EPROBE_DEFER)
@@ -805,6 +809,48 @@ static void __exit venc_uninit_output(struct platform_device *pdev)
 	omapdss_unregister_output(out);
 }
 
+static int venc_probe_of(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *ep;
+	u32 channels;
+	int r;
+
+	ep = omapdss_of_get_first_endpoint(node);
+	if (!ep)
+		return 0;
+
+	venc.invert_polarity = of_property_read_bool(ep, "ti,invert-polarity");
+
+	r = of_property_read_u32(ep, "ti,channels", &channels);
+	if (r) {
+		dev_err(&pdev->dev,
+			"failed to read property 'ti,channels': %d\n", r);
+		goto err;
+	}
+
+	switch (channels) {
+	case 1:
+		venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE;
+		break;
+	case 2:
+		venc.type = OMAP_DSS_VENC_TYPE_SVIDEO;
+		break;
+	default:
+		dev_err(&pdev->dev, "bad channel propert '%d'\n", channels);
+		r = -EINVAL;
+		goto err;
+	}
+
+	of_node_put(ep);
+
+	return 0;
+err:
+	of_node_put(ep);
+
+	return 0;
+}
+
 /* VENC HW IP initialisation */
 static int omap_venchw_probe(struct platform_device *pdev)
 {
@@ -846,12 +892,21 @@ static int omap_venchw_probe(struct platform_device *pdev)
 
 	venc_runtime_put();
 
+	if (pdev->dev.of_node) {
+		r = venc_probe_of(pdev);
+		if (r) {
+			DSSERR("Invalid DT data\n");
+			goto err_probe_of;
+		}
+	}
+
 	dss_debugfs_create_file("venc", venc_dump_regs);
 
 	venc_init_output(pdev);
 
 	return 0;
 
+err_probe_of:
 err_runtime_get:
 	pm_runtime_disable(&pdev->dev);
 	return r;
@@ -895,6 +950,14 @@ static const struct dev_pm_ops venc_pm_ops = {
 	.runtime_resume = venc_runtime_resume,
 };
 
+
+static const struct of_device_id venc_of_match[] = {
+	{ .compatible = "ti,omap2-venc", },
+	{ .compatible = "ti,omap3-venc", },
+	{ .compatible = "ti,omap4-venc", },
+	{},
+};
+
 static struct platform_driver omap_venchw_driver = {
 	.probe		= omap_venchw_probe,
 	.remove         = __exit_p(omap_venchw_remove),
@@ -902,6 +965,7 @@ static struct platform_driver omap_venchw_driver = {
 		.name   = "omapdss_venc",
 		.owner  = THIS_MODULE,
 		.pm	= &venc_pm_ops,
+		.of_match_table = venc_of_match,
 	},
 };
 
diff --git a/drivers/video/omap2/dss/venc_panel.c b/drivers/video/fbdev/omap2/dss/venc_panel.c
index f7d92c57bd73..af68cd444d7e 100644
--- a/drivers/video/omap2/dss/venc_panel.c
+++ b/drivers/video/fbdev/omap2/dss/venc_panel.c
@@ -89,7 +89,7 @@ static int venc_panel_probe(struct omap_dss_device *dssdev)
 	const struct omap_video_timings default_timings = {
 		.x_res		= 720,
 		.y_res		= 574,
-		.pixel_clock	= 13500,
+		.pixelclock	= 13500000,
 		.hsw		= 64,
 		.hfp		= 12,
 		.hbp		= 68,
diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/fbdev/omap2/omapfb/Kconfig
index 4cb12ce68855..4cb12ce68855 100644
--- a/drivers/video/omap2/omapfb/Kconfig
+++ b/drivers/video/fbdev/omap2/omapfb/Kconfig
diff --git a/drivers/video/omap2/omapfb/Makefile b/drivers/video/fbdev/omap2/omapfb/Makefile
index 51c2e00d9bf8..51c2e00d9bf8 100644
--- a/drivers/video/omap2/omapfb/Makefile
+++ b/drivers/video/fbdev/omap2/omapfb/Makefile
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c
index 146b6f5428db..146b6f5428db 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/fbdev/omap2/omapfb/omapfb-main.c
index fcb9e932d00c..ec2d132c782d 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb-main.c
@@ -723,8 +723,8 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
 		display->driver->get_timings(display, &timings);
 
 		/* pixclock in ps, the rest in pixclock */
-		var->pixclock = timings.pixel_clock != 0 ?
-			KHZ2PICOS(timings.pixel_clock) :
+		var->pixclock = timings.pixelclock != 0 ?
+			KHZ2PICOS(timings.pixelclock / 1000) :
 			0;
 		var->left_margin = timings.hbp;
 		var->right_margin = timings.hfp;
@@ -2077,7 +2077,7 @@ static int omapfb_mode_to_timings(const char *mode_str,
 		timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
 	}
 
-	timings->pixel_clock = PICOS2KHZ(var->pixclock);
+	timings->pixelclock = PICOS2KHZ(var->pixclock) * 1000;
 	timings->hbp = var->left_margin;
 	timings->hfp = var->right_margin;
 	timings->vbp = var->upper_margin;
@@ -2229,7 +2229,7 @@ static void fb_videomode_to_omap_timings(struct fb_videomode *m,
 
 	t->x_res = m->xres;
 	t->y_res = m->yres;
-	t->pixel_clock = PICOS2KHZ(m->pixclock);
+	t->pixelclock = PICOS2KHZ(m->pixclock) * 1000;
 	t->hsw = m->hsync_len;
 	t->hfp = m->right_margin;
 	t->hbp = m->left_margin;
@@ -2417,6 +2417,55 @@ static int omapfb_init_connections(struct omapfb2_device *fbdev,
 	return 0;
 }
 
+static struct omap_dss_device *
+omapfb_find_default_display(struct omapfb2_device *fbdev)
+{
+	const char *def_name;
+	int i;
+
+	/*
+	 * Search with the display name from the user or the board file,
+	 * comparing to display names and aliases
+	 */
+
+	def_name = omapdss_get_default_display_name();
+
+	if (def_name) {
+		for (i = 0; i < fbdev->num_displays; ++i) {
+			struct omap_dss_device *dssdev;
+
+			dssdev = fbdev->displays[i].dssdev;
+
+			if (dssdev->name && strcmp(def_name, dssdev->name) == 0)
+				return dssdev;
+
+			if (strcmp(def_name, dssdev->alias) == 0)
+				return dssdev;
+		}
+
+		/* def_name given but not found */
+		return NULL;
+	}
+
+	/* then look for DT alias display0 */
+	for (i = 0; i < fbdev->num_displays; ++i) {
+		struct omap_dss_device *dssdev;
+		int id;
+
+		dssdev = fbdev->displays[i].dssdev;
+
+		if (dssdev->dev->of_node == NULL)
+			continue;
+
+		id = of_alias_get_id(dssdev->dev->of_node, "display");
+		if (id == 0)
+			return dssdev;
+	}
+
+	/* return the first display we have in the list */
+	return fbdev->displays[0].dssdev;
+}
+
 static int omapfb_probe(struct platform_device *pdev)
 {
 	struct omapfb2_device *fbdev = NULL;
@@ -2494,23 +2543,7 @@ static int omapfb_probe(struct platform_device *pdev)
 	for (i = 0; i < fbdev->num_managers; i++)
 		fbdev->managers[i] = omap_dss_get_overlay_manager(i);
 
-	def_display = NULL;
-
-	for (i = 0; i < fbdev->num_displays; ++i) {
-		struct omap_dss_device *dssdev;
-		const char *def_name;
-
-		def_name = omapdss_get_default_display_name();
-
-		dssdev = fbdev->displays[i].dssdev;
-
-		if (def_name == NULL ||
-			(dssdev->name && strcmp(def_name, dssdev->name) == 0)) {
-			def_display = dssdev;
-			break;
-		}
-	}
-
+	def_display = omapfb_find_default_display(fbdev);
 	if (def_display == NULL) {
 		dev_err(fbdev->dev, "failed to find default display\n");
 		r = -EPROBE_DEFER;
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c
index 18fa9e1d0033..18fa9e1d0033 100644
--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c
diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/fbdev/omap2/omapfb/omapfb.h
index 623cd872a367..623cd872a367 100644
--- a/drivers/video/omap2/omapfb/omapfb.h
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb.h
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/fbdev/omap2/vrfb.c
index f346b02eee1d..f346b02eee1d 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/fbdev/omap2/vrfb.c
diff --git a/drivers/video/p9100.c b/drivers/video/fbdev/p9100.c
index 367cea8f43f3..367cea8f43f3 100644
--- a/drivers/video/p9100.c
+++ b/drivers/video/fbdev/p9100.c
diff --git a/drivers/video/platinumfb.c b/drivers/video/fbdev/platinumfb.c
index 4c9299576827..4c9299576827 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/fbdev/platinumfb.c
diff --git a/drivers/video/platinumfb.h b/drivers/video/fbdev/platinumfb.h
index f6bd77cafd17..f6bd77cafd17 100644
--- a/drivers/video/platinumfb.h
+++ b/drivers/video/fbdev/platinumfb.h
diff --git a/drivers/video/pm2fb.c b/drivers/video/fbdev/pm2fb.c
index 3b85b647bc10..3b85b647bc10 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/fbdev/pm2fb.c
diff --git a/drivers/video/pm3fb.c b/drivers/video/fbdev/pm3fb.c
index 4bf3273d0433..4bf3273d0433 100644
--- a/drivers/video/pm3fb.c
+++ b/drivers/video/fbdev/pm3fb.c
diff --git a/drivers/video/pmag-aa-fb.c b/drivers/video/fbdev/pmag-aa-fb.c
index 838424817de2..838424817de2 100644
--- a/drivers/video/pmag-aa-fb.c
+++ b/drivers/video/fbdev/pmag-aa-fb.c
diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/fbdev/pmag-ba-fb.c
index 914a52ba8477..914a52ba8477 100644
--- a/drivers/video/pmag-ba-fb.c
+++ b/drivers/video/fbdev/pmag-ba-fb.c
diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/fbdev/pmagb-b-fb.c
index 0822b6f8dddc..0822b6f8dddc 100644
--- a/drivers/video/pmagb-b-fb.c
+++ b/drivers/video/fbdev/pmagb-b-fb.c
diff --git a/drivers/video/ps3fb.c b/drivers/video/fbdev/ps3fb.c
index b269abd932aa..b269abd932aa 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/fbdev/ps3fb.c
diff --git a/drivers/video/pvr2fb.c b/drivers/video/fbdev/pvr2fb.c
index 167cffff3d4e..167cffff3d4e 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/fbdev/pvr2fb.c
diff --git a/drivers/video/pxa168fb.c b/drivers/video/fbdev/pxa168fb.c
index c95b9e46d48f..c95b9e46d48f 100644
--- a/drivers/video/pxa168fb.c
+++ b/drivers/video/fbdev/pxa168fb.c
diff --git a/drivers/video/pxa168fb.h b/drivers/video/fbdev/pxa168fb.h
index eee09279c524..eee09279c524 100644
--- a/drivers/video/pxa168fb.h
+++ b/drivers/video/fbdev/pxa168fb.h
diff --git a/drivers/video/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c
index ad382b3396cd..417f9a27eb7d 100644
--- a/drivers/video/pxa3xx-gcu.c
+++ b/drivers/video/fbdev/pxa3xx-gcu.c
@@ -107,7 +107,6 @@ struct pxa3xx_gcu_priv {
 	struct timeval 		  base_time;
 
 	struct pxa3xx_gcu_batch *free;
-
 	struct pxa3xx_gcu_batch *ready;
 	struct pxa3xx_gcu_batch *ready_last;
 	struct pxa3xx_gcu_batch *running;
@@ -368,27 +367,35 @@ pxa3xx_gcu_wait_free(struct pxa3xx_gcu_priv *priv)
 
 /* Misc device layer */
 
-static inline struct pxa3xx_gcu_priv *file_dev(struct file *file)
+static inline struct pxa3xx_gcu_priv *to_pxa3xx_gcu_priv(struct file *file)
 {
 	struct miscdevice *dev = file->private_data;
 	return container_of(dev, struct pxa3xx_gcu_priv, misc_dev);
 }
 
+/*
+ * provide an empty .open callback, so the core sets file->private_data
+ * for us.
+ */
+static int pxa3xx_gcu_open(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
 static ssize_t
-pxa3xx_gcu_misc_write(struct file *file, const char *buff,
-		      size_t count, loff_t *offp)
+pxa3xx_gcu_write(struct file *file, const char *buff,
+		 size_t count, loff_t *offp)
 {
 	int ret;
 	unsigned long flags;
 	struct pxa3xx_gcu_batch	*buffer;
-	struct pxa3xx_gcu_priv *priv = file_dev(file);
+	struct pxa3xx_gcu_priv *priv = to_pxa3xx_gcu_priv(file);
 
 	int words = count / 4;
 
 	/* Does not need to be atomic. There's a lock in user space,
 	 * but anyhow, this is just for statistics. */
 	priv->shared->num_writes++;
-
 	priv->shared->num_words += words;
 
 	/* Last word reserved for batch buffer end command */
@@ -406,10 +413,8 @@ pxa3xx_gcu_misc_write(struct file *file, const char *buff,
 	 * Get buffer from free list
 	 */
 	spin_lock_irqsave(&priv->spinlock, flags);
-
 	buffer = priv->free;
 	priv->free = buffer->next;
-
 	spin_unlock_irqrestore(&priv->spinlock, flags);
 
 
@@ -454,10 +459,10 @@ pxa3xx_gcu_misc_write(struct file *file, const char *buff,
 
 
 static long
-pxa3xx_gcu_misc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+pxa3xx_gcu_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	unsigned long flags;
-	struct pxa3xx_gcu_priv *priv = file_dev(file);
+	struct pxa3xx_gcu_priv *priv = to_pxa3xx_gcu_priv(file);
 
 	switch (cmd) {
 	case PXA3XX_GCU_IOCTL_RESET:
@@ -474,10 +479,10 @@ pxa3xx_gcu_misc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 }
 
 static int
-pxa3xx_gcu_misc_mmap(struct file *file, struct vm_area_struct *vma)
+pxa3xx_gcu_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	unsigned int size = vma->vm_end - vma->vm_start;
-	struct pxa3xx_gcu_priv *priv = file_dev(file);
+	struct pxa3xx_gcu_priv *priv = to_pxa3xx_gcu_priv(file);
 
 	switch (vma->vm_pgoff) {
 	case 0:
@@ -532,8 +537,8 @@ static inline void pxa3xx_gcu_init_debug_timer(void) {}
 #endif
 
 static int
-add_buffer(struct platform_device *dev,
-	   struct pxa3xx_gcu_priv *priv)
+pxa3xx_gcu_add_buffer(struct device *dev,
+		      struct pxa3xx_gcu_priv *priv)
 {
 	struct pxa3xx_gcu_batch *buffer;
 
@@ -541,7 +546,7 @@ add_buffer(struct platform_device *dev,
 	if (!buffer)
 		return -ENOMEM;
 
-	buffer->ptr = dma_alloc_coherent(&dev->dev, PXA3XX_GCU_BATCH_WORDS * 4,
+	buffer->ptr = dma_alloc_coherent(dev, PXA3XX_GCU_BATCH_WORDS * 4,
 					 &buffer->phys, GFP_KERNEL);
 	if (!buffer->ptr) {
 		kfree(buffer);
@@ -549,57 +554,49 @@ add_buffer(struct platform_device *dev,
 	}
 
 	buffer->next = priv->free;
-
 	priv->free = buffer;
 
 	return 0;
 }
 
 static void
-free_buffers(struct platform_device *dev,
-	     struct pxa3xx_gcu_priv *priv)
+pxa3xx_gcu_free_buffers(struct device *dev,
+			struct pxa3xx_gcu_priv *priv)
 {
 	struct pxa3xx_gcu_batch *next, *buffer = priv->free;
 
 	while (buffer) {
 		next = buffer->next;
 
-		dma_free_coherent(&dev->dev, PXA3XX_GCU_BATCH_WORDS * 4,
+		dma_free_coherent(dev, PXA3XX_GCU_BATCH_WORDS * 4,
 				  buffer->ptr, buffer->phys);
 
 		kfree(buffer);
-
 		buffer = next;
 	}
 
 	priv->free = NULL;
 }
 
-static const struct file_operations misc_fops = {
-	.owner	= THIS_MODULE,
-	.write	= pxa3xx_gcu_misc_write,
-	.unlocked_ioctl = pxa3xx_gcu_misc_ioctl,
-	.mmap	= pxa3xx_gcu_misc_mmap
+static const struct file_operations pxa3xx_gcu_miscdev_fops = {
+	.owner =		THIS_MODULE,
+	.open =			pxa3xx_gcu_open,
+	.write =		pxa3xx_gcu_write,
+	.unlocked_ioctl =	pxa3xx_gcu_ioctl,
+	.mmap =			pxa3xx_gcu_mmap,
 };
 
-static int pxa3xx_gcu_probe(struct platform_device *dev)
+static int pxa3xx_gcu_probe(struct platform_device *pdev)
 {
 	int i, ret, irq;
 	struct resource *r;
 	struct pxa3xx_gcu_priv *priv;
+	struct device *dev = &pdev->dev;
 
-	priv = kzalloc(sizeof(struct pxa3xx_gcu_priv), GFP_KERNEL);
+	priv = devm_kzalloc(dev, sizeof(struct pxa3xx_gcu_priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	for (i = 0; i < 8; i++) {
-		ret = add_buffer(dev, priv);
-		if (ret) {
-			dev_err(&dev->dev, "failed to allocate DMA memory\n");
-			goto err_free_priv;
-		}
-	}
-
 	init_waitqueue_head(&priv->wait_idle);
 	init_waitqueue_head(&priv->wait_free);
 	spin_lock_init(&priv->spinlock);
@@ -611,125 +608,99 @@ static int pxa3xx_gcu_probe(struct platform_device *dev)
 
 	priv->misc_dev.minor	= MISCDEV_MINOR,
 	priv->misc_dev.name	= DRV_NAME,
-	priv->misc_dev.fops	= &misc_fops,
+	priv->misc_dev.fops	= &pxa3xx_gcu_miscdev_fops;
 
-	/* register misc device */
-	ret = misc_register(&priv->misc_dev);
-	if (ret < 0) {
-		dev_err(&dev->dev, "misc_register() for minor %d failed\n",
-			MISCDEV_MINOR);
-		goto err_free_priv;
+	/* handle IO resources */
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->mmio_base = devm_request_and_ioremap(dev, r);
+	if (IS_ERR(priv->mmio_base)) {
+		dev_err(dev, "failed to map I/O memory\n");
+		return PTR_ERR(priv->mmio_base);
 	}
 
-	/* handle IO resources */
-	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (r == NULL) {
-		dev_err(&dev->dev, "no I/O memory resource defined\n");
-		ret = -ENODEV;
-		goto err_misc_deregister;
+	/* enable the clock */
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "failed to get clock\n");
+		return PTR_ERR(priv->clk);
 	}
 
-	if (!request_mem_region(r->start, resource_size(r), dev->name)) {
-		dev_err(&dev->dev, "failed to request I/O memory\n");
-		ret = -EBUSY;
-		goto err_misc_deregister;
+	/* request the IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "no IRQ defined\n");
+		return -ENODEV;
 	}
 
-	priv->mmio_base = ioremap_nocache(r->start, resource_size(r));
-	if (!priv->mmio_base) {
-		dev_err(&dev->dev, "failed to map I/O memory\n");
-		ret = -EBUSY;
-		goto err_free_mem_region;
+	ret = devm_request_irq(dev, irq, pxa3xx_gcu_handle_irq,
+			       0, DRV_NAME, priv);
+	if (ret < 0) {
+		dev_err(dev, "request_irq failed\n");
+		return ret;
 	}
 
 	/* allocate dma memory */
-	priv->shared = dma_alloc_coherent(&dev->dev, SHARED_SIZE,
+	priv->shared = dma_alloc_coherent(dev, SHARED_SIZE,
 					  &priv->shared_phys, GFP_KERNEL);
-
 	if (!priv->shared) {
-		dev_err(&dev->dev, "failed to allocate DMA memory\n");
-		ret = -ENOMEM;
-		goto err_free_io;
+		dev_err(dev, "failed to allocate DMA memory\n");
+		return -ENOMEM;
 	}
 
-	/* enable the clock */
-	priv->clk = clk_get(&dev->dev, NULL);
-	if (IS_ERR(priv->clk)) {
-		dev_err(&dev->dev, "failed to get clock\n");
-		ret = -ENODEV;
+	/* register misc device */
+	ret = misc_register(&priv->misc_dev);
+	if (ret < 0) {
+		dev_err(dev, "misc_register() for minor %d failed\n",
+			MISCDEV_MINOR);
 		goto err_free_dma;
 	}
 
 	ret = clk_enable(priv->clk);
 	if (ret < 0) {
-		dev_err(&dev->dev, "failed to enable clock\n");
-		goto err_put_clk;
-	}
-
-	/* request the IRQ */
-	irq = platform_get_irq(dev, 0);
-	if (irq < 0) {
-		dev_err(&dev->dev, "no IRQ defined\n");
-		ret = -ENODEV;
-		goto err_put_clk;
+		dev_err(dev, "failed to enable clock\n");
+		goto err_misc_deregister;
 	}
 
-	ret = request_irq(irq, pxa3xx_gcu_handle_irq,
-			  0, DRV_NAME, priv);
-	if (ret) {
-		dev_err(&dev->dev, "request_irq failed\n");
-		ret = -EBUSY;
-		goto err_put_clk;
+	for (i = 0; i < 8; i++) {
+		ret = pxa3xx_gcu_add_buffer(dev, priv);
+		if (ret) {
+			dev_err(dev, "failed to allocate DMA memory\n");
+			goto err_disable_clk;
+		}
 	}
 
-	platform_set_drvdata(dev, priv);
+	platform_set_drvdata(pdev, priv);
 	priv->resource_mem = r;
 	pxa3xx_gcu_reset(priv);
 	pxa3xx_gcu_init_debug_timer();
 
-	dev_info(&dev->dev, "registered @0x%p, DMA 0x%p (%d bytes), IRQ %d\n",
+	dev_info(dev, "registered @0x%p, DMA 0x%p (%d bytes), IRQ %d\n",
 			(void *) r->start, (void *) priv->shared_phys,
 			SHARED_SIZE, irq);
 	return 0;
 
-err_put_clk:
-	clk_disable(priv->clk);
-	clk_put(priv->clk);
-
 err_free_dma:
-	dma_free_coherent(&dev->dev, SHARED_SIZE,
+	dma_free_coherent(dev, SHARED_SIZE,
 			priv->shared, priv->shared_phys);
 
-err_free_io:
-	iounmap(priv->mmio_base);
-
-err_free_mem_region:
-	release_mem_region(r->start, resource_size(r));
-
 err_misc_deregister:
 	misc_deregister(&priv->misc_dev);
 
-err_free_priv:
-	free_buffers(dev, priv);
-	kfree(priv);
+err_disable_clk:
+	clk_disable(priv->clk);
+
 	return ret;
 }
 
-static int pxa3xx_gcu_remove(struct platform_device *dev)
+static int pxa3xx_gcu_remove(struct platform_device *pdev)
 {
-	struct pxa3xx_gcu_priv *priv = platform_get_drvdata(dev);
-	struct resource *r = priv->resource_mem;
+	struct pxa3xx_gcu_priv *priv = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
 
 	pxa3xx_gcu_wait_idle(priv);
-
 	misc_deregister(&priv->misc_dev);
-	dma_free_coherent(&dev->dev, SHARED_SIZE,
-			priv->shared, priv->shared_phys);
-	iounmap(priv->mmio_base);
-	release_mem_region(r->start, resource_size(r));
-	clk_disable(priv->clk);
-	free_buffers(dev, priv);
-	kfree(priv);
+	dma_free_coherent(dev, SHARED_SIZE, priv->shared, priv->shared_phys);
+	pxa3xx_gcu_free_buffers(dev, priv);
 
 	return 0;
 }
diff --git a/drivers/video/pxa3xx-gcu.h b/drivers/video/fbdev/pxa3xx-gcu.h
index 0428ed03dc49..0428ed03dc49 100644
--- a/drivers/video/pxa3xx-gcu.h
+++ b/drivers/video/fbdev/pxa3xx-gcu.h
diff --git a/drivers/video/pxafb.c b/drivers/video/fbdev/pxafb.c
index 1ecd9cec2921..1ecd9cec2921 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
diff --git a/drivers/video/pxafb.h b/drivers/video/fbdev/pxafb.h
index 26ba9fa3f737..26ba9fa3f737 100644
--- a/drivers/video/pxafb.h
+++ b/drivers/video/fbdev/pxafb.h
diff --git a/drivers/video/q40fb.c b/drivers/video/fbdev/q40fb.c
index 7487f76f6275..7487f76f6275 100644
--- a/drivers/video/q40fb.c
+++ b/drivers/video/fbdev/q40fb.c
diff --git a/drivers/video/riva/Makefile b/drivers/video/fbdev/riva/Makefile
index 8898c9915b02..8898c9915b02 100644
--- a/drivers/video/riva/Makefile
+++ b/drivers/video/fbdev/riva/Makefile
diff --git a/drivers/video/riva/fbdev.c b/drivers/video/fbdev/riva/fbdev.c
index 8a8d7f060784..8a8d7f060784 100644
--- a/drivers/video/riva/fbdev.c
+++ b/drivers/video/fbdev/riva/fbdev.c
diff --git a/drivers/video/riva/nv_driver.c b/drivers/video/fbdev/riva/nv_driver.c
index f3694cf17e58..f3694cf17e58 100644
--- a/drivers/video/riva/nv_driver.c
+++ b/drivers/video/fbdev/riva/nv_driver.c
diff --git a/drivers/video/riva/nv_type.h b/drivers/video/fbdev/riva/nv_type.h
index a69480c9a67c..a69480c9a67c 100644
--- a/drivers/video/riva/nv_type.h
+++ b/drivers/video/fbdev/riva/nv_type.h
diff --git a/drivers/video/riva/nvreg.h b/drivers/video/fbdev/riva/nvreg.h
index abfc167ae8d8..abfc167ae8d8 100644
--- a/drivers/video/riva/nvreg.h
+++ b/drivers/video/fbdev/riva/nvreg.h
diff --git a/drivers/video/riva/riva_hw.c b/drivers/video/fbdev/riva/riva_hw.c
index 78fdbf5178d7..78fdbf5178d7 100644
--- a/drivers/video/riva/riva_hw.c
+++ b/drivers/video/fbdev/riva/riva_hw.c
diff --git a/drivers/video/riva/riva_hw.h b/drivers/video/fbdev/riva/riva_hw.h
index c2769f73e0b2..c2769f73e0b2 100644
--- a/drivers/video/riva/riva_hw.h
+++ b/drivers/video/fbdev/riva/riva_hw.h
diff --git a/drivers/video/riva/riva_tbl.h b/drivers/video/fbdev/riva/riva_tbl.h
index 7ee7d72932d4..7ee7d72932d4 100644
--- a/drivers/video/riva/riva_tbl.h
+++ b/drivers/video/fbdev/riva/riva_tbl.h
diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/fbdev/riva/rivafb-i2c.c
index 6a183375ced1..6a183375ced1 100644
--- a/drivers/video/riva/rivafb-i2c.c
+++ b/drivers/video/fbdev/riva/rivafb-i2c.c
diff --git a/drivers/video/riva/rivafb.h b/drivers/video/fbdev/riva/rivafb.h
index d9f107b704c6..d9f107b704c6 100644
--- a/drivers/video/riva/rivafb.h
+++ b/drivers/video/fbdev/riva/rivafb.h
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/fbdev/s1d13xxxfb.c
index 83433cb0dfba..83433cb0dfba 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/fbdev/s1d13xxxfb.c
diff --git a/drivers/video/s3c-fb.c b/drivers/video/fbdev/s3c-fb.c
index 62acae2694a9..62acae2694a9 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/fbdev/s3c-fb.c
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
index 81af5a63e9e1..81af5a63e9e1 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/fbdev/s3c2410fb.c
diff --git a/drivers/video/s3c2410fb.h b/drivers/video/fbdev/s3c2410fb.h
index 47a17bd23011..47a17bd23011 100644
--- a/drivers/video/s3c2410fb.h
+++ b/drivers/video/fbdev/s3c2410fb.h
diff --git a/drivers/video/s3fb.c b/drivers/video/fbdev/s3fb.c
index 9a3f8f1c6aab..9a3f8f1c6aab 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/fbdev/s3fb.c
diff --git a/drivers/video/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index 580c444ec301..580c444ec301 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c
diff --git a/drivers/video/sa1100fb.h b/drivers/video/fbdev/sa1100fb.h
index fc5d4292fad6..fc5d4292fad6 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/fbdev/sa1100fb.h
diff --git a/drivers/video/savage/Makefile b/drivers/video/fbdev/savage/Makefile
index e09770fff8ea..e09770fff8ea 100644
--- a/drivers/video/savage/Makefile
+++ b/drivers/video/fbdev/savage/Makefile
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/fbdev/savage/savagefb-i2c.c
index 80fa87e2ae2f..80fa87e2ae2f 100644
--- a/drivers/video/savage/savagefb-i2c.c
+++ b/drivers/video/fbdev/savage/savagefb-i2c.c
diff --git a/drivers/video/savage/savagefb.h b/drivers/video/fbdev/savage/savagefb.h
index dcaab9012ca2..dcaab9012ca2 100644
--- a/drivers/video/savage/savagefb.h
+++ b/drivers/video/fbdev/savage/savagefb.h
diff --git a/drivers/video/savage/savagefb_accel.c b/drivers/video/fbdev/savage/savagefb_accel.c
index bfefa6234cf0..bfefa6234cf0 100644
--- a/drivers/video/savage/savagefb_accel.c
+++ b/drivers/video/fbdev/savage/savagefb_accel.c
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c
index 4dbf45f3b21a..4dbf45f3b21a 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/fbdev/savage/savagefb_driver.c
diff --git a/drivers/video/sbuslib.c b/drivers/video/fbdev/sbuslib.c
index a350209ffbd3..a350209ffbd3 100644
--- a/drivers/video/sbuslib.c
+++ b/drivers/video/fbdev/sbuslib.c
diff --git a/drivers/video/sbuslib.h b/drivers/video/fbdev/sbuslib.h
index 7ba3250236bd..7ba3250236bd 100644
--- a/drivers/video/sbuslib.h
+++ b/drivers/video/fbdev/sbuslib.h
diff --git a/drivers/video/sh7760fb.c b/drivers/video/fbdev/sh7760fb.c
index 1265b25f9f99..1265b25f9f99 100644
--- a/drivers/video/sh7760fb.c
+++ b/drivers/video/fbdev/sh7760fb.c
diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/fbdev/sh_mipi_dsi.c
index 8f6e8ff620d4..8f6e8ff620d4 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/fbdev/sh_mipi_dsi.c
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/fbdev/sh_mobile_hdmi.c
index 9a33ee0413fb..9a33ee0413fb 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/fbdev/sh_mobile_hdmi.c
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/fbdev/sh_mobile_lcdcfb.c
index 2bcc84ac18c7..2bcc84ac18c7 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/fbdev/sh_mobile_lcdcfb.c
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/fbdev/sh_mobile_lcdcfb.h
index f839adef1d90..f839adef1d90 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/fbdev/sh_mobile_lcdcfb.h
diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/fbdev/sh_mobile_meram.c
index a297de5cc859..a297de5cc859 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/fbdev/sh_mobile_meram.c
diff --git a/drivers/video/simplefb.c b/drivers/video/fbdev/simplefb.c
index 210f3a02121a..210f3a02121a 100644
--- a/drivers/video/simplefb.c
+++ b/drivers/video/fbdev/simplefb.c
diff --git a/drivers/video/sis/300vtbl.h b/drivers/video/fbdev/sis/300vtbl.h
index e4b4a2626da4..e4b4a2626da4 100644
--- a/drivers/video/sis/300vtbl.h
+++ b/drivers/video/fbdev/sis/300vtbl.h
diff --git a/drivers/video/sis/310vtbl.h b/drivers/video/fbdev/sis/310vtbl.h
index 54fcbbf4ef63..54fcbbf4ef63 100644
--- a/drivers/video/sis/310vtbl.h
+++ b/drivers/video/fbdev/sis/310vtbl.h
diff --git a/drivers/video/sis/Makefile b/drivers/video/fbdev/sis/Makefile
index f7c0046e5b1d..f7c0046e5b1d 100644
--- a/drivers/video/sis/Makefile
+++ b/drivers/video/fbdev/sis/Makefile
diff --git a/drivers/video/sis/init.c b/drivers/video/fbdev/sis/init.c
index 4f26bc28e60b..bd40f5ecd901 100644
--- a/drivers/video/sis/init.c
+++ b/drivers/video/fbdev/sis/init.c
@@ -651,6 +651,7 @@ SiS_GetModeID_LCD(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDispla
 	     switch(VDisplay) {
 	     case 720:
 		ModeIndex = ModeIndex_1280x720[Depth];
+		break;
 	     case 768:
 		if(VGAEngine == SIS_300_VGA) {
 		   ModeIndex = ModeIndex_300_1280x768[Depth];
diff --git a/drivers/video/sis/init.h b/drivers/video/fbdev/sis/init.h
index 85d6738b6c64..85d6738b6c64 100644
--- a/drivers/video/sis/init.h
+++ b/drivers/video/fbdev/sis/init.h
diff --git a/drivers/video/sis/init301.c b/drivers/video/fbdev/sis/init301.c
index a89e3cafd5ad..a89e3cafd5ad 100644
--- a/drivers/video/sis/init301.c
+++ b/drivers/video/fbdev/sis/init301.c
diff --git a/drivers/video/sis/init301.h b/drivers/video/fbdev/sis/init301.h
index 2112d6d7feda..2112d6d7feda 100644
--- a/drivers/video/sis/init301.h
+++ b/drivers/video/fbdev/sis/init301.h
diff --git a/drivers/video/sis/initdef.h b/drivers/video/fbdev/sis/initdef.h
index 264b55a5947b..264b55a5947b 100644
--- a/drivers/video/sis/initdef.h
+++ b/drivers/video/fbdev/sis/initdef.h
diff --git a/drivers/video/sis/initextlfb.c b/drivers/video/fbdev/sis/initextlfb.c
index 3ab18f5a3759..3ab18f5a3759 100644
--- a/drivers/video/sis/initextlfb.c
+++ b/drivers/video/fbdev/sis/initextlfb.c
diff --git a/drivers/video/sis/oem300.h b/drivers/video/fbdev/sis/oem300.h
index b73f26840143..b73f26840143 100644
--- a/drivers/video/sis/oem300.h
+++ b/drivers/video/fbdev/sis/oem300.h
diff --git a/drivers/video/sis/oem310.h b/drivers/video/fbdev/sis/oem310.h
index 8fce56e4482c..8fce56e4482c 100644
--- a/drivers/video/sis/oem310.h
+++ b/drivers/video/fbdev/sis/oem310.h
diff --git a/drivers/video/sis/sis.h b/drivers/video/fbdev/sis/sis.h
index 1987f1b7212f..1987f1b7212f 100644
--- a/drivers/video/sis/sis.h
+++ b/drivers/video/fbdev/sis/sis.h
diff --git a/drivers/video/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..ceb434c95c0d 100644
--- a/drivers/video/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
diff --git a/drivers/video/sis/sis_accel.h b/drivers/video/fbdev/sis/sis_accel.h
index 30e03cdf6b85..30e03cdf6b85 100644
--- a/drivers/video/sis/sis_accel.h
+++ b/drivers/video/fbdev/sis/sis_accel.h
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/fbdev/sis/sis_main.c
index 22ad028bf123..22ad028bf123 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/fbdev/sis/sis_main.c
diff --git a/drivers/video/sis/sis_main.h b/drivers/video/fbdev/sis/sis_main.h
index 32e23c209430..32e23c209430 100644
--- a/drivers/video/sis/sis_main.h
+++ b/drivers/video/fbdev/sis/sis_main.h
diff --git a/drivers/video/sis/vgatypes.h b/drivers/video/fbdev/sis/vgatypes.h
index e3f9976cfef0..e3f9976cfef0 100644
--- a/drivers/video/sis/vgatypes.h
+++ b/drivers/video/fbdev/sis/vgatypes.h
diff --git a/drivers/video/sis/vstruct.h b/drivers/video/fbdev/sis/vstruct.h
index ea94d214dcff..ea94d214dcff 100644
--- a/drivers/video/sis/vstruct.h
+++ b/drivers/video/fbdev/sis/vstruct.h
diff --git a/drivers/video/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c
index fefde7c6add7..fefde7c6add7 100644
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/fbdev/skeletonfb.c
diff --git a/drivers/video/sm501fb.c b/drivers/video/fbdev/sm501fb.c
index 1501979099dc..1501979099dc 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/fbdev/sm501fb.c
diff --git a/drivers/video/smscufx.c b/drivers/video/fbdev/smscufx.c
index d513ed6a49f2..d513ed6a49f2 100644
--- a/drivers/video/smscufx.c
+++ b/drivers/video/fbdev/smscufx.c
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index f4daa59f0a80..f4daa59f0a80 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
diff --git a/drivers/video/sstfb.c b/drivers/video/fbdev/sstfb.c
index f0cb279ef333..f0cb279ef333 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/fbdev/sstfb.c
diff --git a/drivers/video/sticore.h b/drivers/video/fbdev/sticore.h
index af1619536ac8..af1619536ac8 100644
--- a/drivers/video/sticore.h
+++ b/drivers/video/fbdev/sticore.h
diff --git a/drivers/video/stifb.c b/drivers/video/fbdev/stifb.c
index cfe8a2f905c5..cfe8a2f905c5 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/fbdev/stifb.c
diff --git a/drivers/video/sunxvr1000.c b/drivers/video/fbdev/sunxvr1000.c
index 58241b47a96d..58241b47a96d 100644
--- a/drivers/video/sunxvr1000.c
+++ b/drivers/video/fbdev/sunxvr1000.c
diff --git a/drivers/video/sunxvr2500.c b/drivers/video/fbdev/sunxvr2500.c
index 843b6bab0483..843b6bab0483 100644
--- a/drivers/video/sunxvr2500.c
+++ b/drivers/video/fbdev/sunxvr2500.c
diff --git a/drivers/video/sunxvr500.c b/drivers/video/fbdev/sunxvr500.c
index 387350d004df..387350d004df 100644
--- a/drivers/video/sunxvr500.c
+++ b/drivers/video/fbdev/sunxvr500.c
diff --git a/drivers/video/tcx.c b/drivers/video/fbdev/tcx.c
index 7fb2d696fac7..7fb2d696fac7 100644
--- a/drivers/video/tcx.c
+++ b/drivers/video/fbdev/tcx.c
diff --git a/drivers/video/tdfxfb.c b/drivers/video/fbdev/tdfxfb.c
index f761fe375f5b..f761fe375f5b 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/fbdev/tdfxfb.c
diff --git a/drivers/video/tgafb.c b/drivers/video/fbdev/tgafb.c
index 07c7df9ee77b..65ba9921506e 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/fbdev/tgafb.c
@@ -182,6 +182,8 @@ tgafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 
 	if (var->xres_virtual != var->xres || var->yres_virtual != var->yres)
 		return -EINVAL;
+	if (var->xres * var->yres * (var->bits_per_pixel >> 3) > info->fix.smem_len)
+		return -EINVAL;
 	if (var->nonstd)
 		return -EINVAL;
 	if (1000000000 / var->pixclock > TGA_PLL_MAX_FREQ)
@@ -190,8 +192,8 @@ tgafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		return -EINVAL;
 
 	/* Some of the acceleration routines assume the line width is
-	   a multiple of 64 bytes.  */
-	if (var->xres * (par->tga_type == TGA_TYPE_8PLANE ? 1 : 4) % 64)
+	   a multiple of 8 bytes.  */
+	if (var->xres * (par->tga_type == TGA_TYPE_8PLANE ? 1 : 4) % 8)
 		return -EINVAL;
 
 	return 0;
@@ -262,6 +264,7 @@ tgafb_set_par(struct fb_info *info)
 	par->yres = info->var.yres;
 	par->pll_freq = pll_freq = 1000000000 / info->var.pixclock;
 	par->bits_per_pixel = info->var.bits_per_pixel;
+	info->fix.line_length = par->xres * (par->bits_per_pixel >> 3);
 
 	tga_type = par->tga_type;
 
@@ -1136,222 +1139,57 @@ copyarea_line_32bpp(struct fb_info *info, u32 dy, u32 sy,
 	__raw_writel(TGA_MODE_SBM_24BPP|TGA_MODE_SIMPLE, tga_regs+TGA_MODE_REG);
 }
 
-/* The general case of forward copy in 8bpp mode.  */
+/* The (almost) general case of backward copy in 8bpp mode.  */
 static inline void
-copyarea_foreward_8bpp(struct fb_info *info, u32 dx, u32 dy, u32 sx, u32 sy,
-		       u32 height, u32 width, u32 line_length)
+copyarea_8bpp(struct fb_info *info, u32 dx, u32 dy, u32 sx, u32 sy,
+	      u32 height, u32 width, u32 line_length,
+	      const struct fb_copyarea *area)
 {
 	struct tga_par *par = (struct tga_par *) info->par;
-	unsigned long i, copied, left;
-	unsigned long dpos, spos, dalign, salign, yincr;
-	u32 smask_first, dmask_first, dmask_last;
-	int pixel_shift, need_prime, need_second;
-	unsigned long n64, n32, xincr_first;
+	unsigned i, yincr;
+	int depos, sepos, backward, last_step, step;
+	u32 mask_last;
+	unsigned n32;
 	void __iomem *tga_regs;
 	void __iomem *tga_fb;
 
-	yincr = line_length;
-	if (dy > sy) {
-		dy += height - 1;
-		sy += height - 1;
-		yincr = -yincr;
-	}
-
-	/* Compute the offsets and alignments in the frame buffer.
-	   More than anything else, these control how we do copies.  */
-	dpos = dy * line_length + dx;
-	spos = sy * line_length + sx;
-	dalign = dpos & 7;
-	salign = spos & 7;
-	dpos &= -8;
-	spos &= -8;
-
-	/* Compute the value for the PIXELSHIFT register.  This controls
-	   both non-co-aligned source and destination and copy direction.  */
-	if (dalign >= salign)
-		pixel_shift = dalign - salign;
-	else
-		pixel_shift = 8 - (salign - dalign);
-
-	/* Figure out if we need an additional priming step for the
-	   residue register.  */
-	need_prime = (salign > dalign);
-	if (need_prime)
-		dpos -= 8;
-
-	/* Begin by copying the leading unaligned destination.  Copy enough
-	   to make the next destination address 32-byte aligned.  */
-	copied = 32 - (dalign + (dpos & 31));
-	if (copied == 32)
-		copied = 0;
-	xincr_first = (copied + 7) & -8;
-	smask_first = dmask_first = (1ul << copied) - 1;
-	smask_first <<= salign;
-	dmask_first <<= dalign + need_prime*8;
-	if (need_prime && copied > 24)
-		copied -= 8;
-	left = width - copied;
-
-	/* Care for small copies.  */
-	if (copied > width) {
-		u32 t;
-		t = (1ul << width) - 1;
-		t <<= dalign + need_prime*8;
-		dmask_first &= t;
-		left = 0;
-	}
-
-	/* Attempt to use 64-byte copies.  This is only possible if the
-	   source and destination are co-aligned at 64 bytes.  */
-	n64 = need_second = 0;
-	if ((dpos & 63) == (spos & 63)
-	    && (height == 1 || line_length % 64 == 0)) {
-		/* We may need a 32-byte copy to ensure 64 byte alignment.  */
-		need_second = (dpos + xincr_first) & 63;
-		if ((need_second & 32) != need_second)
-			printk(KERN_ERR "tgafb: need_second wrong\n");
-		if (left >= need_second + 64) {
-			left -= need_second;
-			n64 = left / 64;
-			left %= 64;
-		} else
-			need_second = 0;
-	}
-
-	/* Copy trailing full 32-byte sections.  This will be the main
-	   loop if the 64 byte loop can't be used.  */
-	n32 = left / 32;
-	left %= 32;
-
-	/* Copy the trailing unaligned destination.  */
-	dmask_last = (1ul << left) - 1;
-
-	tga_regs = par->tga_regs_base;
-	tga_fb = par->tga_fb_base;
-
-	/* Set up the MODE and PIXELSHIFT registers.  */
-	__raw_writel(TGA_MODE_SBM_8BPP|TGA_MODE_COPY, tga_regs+TGA_MODE_REG);
-	__raw_writel(pixel_shift, tga_regs+TGA_PIXELSHIFT_REG);
-	wmb();
-
-	for (i = 0; i < height; ++i) {
-		unsigned long j;
-		void __iomem *sfb;
-		void __iomem *dfb;
-
-		sfb = tga_fb + spos;
-		dfb = tga_fb + dpos;
-		if (dmask_first) {
-			__raw_writel(smask_first, sfb);
-			wmb();
-			__raw_writel(dmask_first, dfb);
-			wmb();
-			sfb += xincr_first;
-			dfb += xincr_first;
-		}
-
-		if (need_second) {
-			__raw_writel(0xffffffff, sfb);
-			wmb();
-			__raw_writel(0xffffffff, dfb);
-			wmb();
-			sfb += 32;
-			dfb += 32;
-		}
-
-		if (n64 && (((unsigned long)sfb | (unsigned long)dfb) & 63))
-			printk(KERN_ERR
-			       "tgafb: misaligned copy64 (s:%p, d:%p)\n",
-			       sfb, dfb);
-
-		for (j = 0; j < n64; ++j) {
-			__raw_writel(sfb - tga_fb, tga_regs+TGA_COPY64_SRC);
-			wmb();
-			__raw_writel(dfb - tga_fb, tga_regs+TGA_COPY64_DST);
-			wmb();
-			sfb += 64;
-			dfb += 64;
-		}
-
-		for (j = 0; j < n32; ++j) {
-			__raw_writel(0xffffffff, sfb);
-			wmb();
-			__raw_writel(0xffffffff, dfb);
-			wmb();
-			sfb += 32;
-			dfb += 32;
-		}
-
-		if (dmask_last) {
-			__raw_writel(0xffffffff, sfb);
-			wmb();
-			__raw_writel(dmask_last, dfb);
-			wmb();
-		}
-
-		spos += yincr;
-		dpos += yincr;
+	/* Do acceleration only if we are aligned on 8 pixels */
+	if ((dx | sx | width) & 7) {
+		cfb_copyarea(info, area);
+		return;
 	}
 
-	/* Reset the MODE register to normal.  */
-	__raw_writel(TGA_MODE_SBM_8BPP|TGA_MODE_SIMPLE, tga_regs+TGA_MODE_REG);
-}
-
-/* The (almost) general case of backward copy in 8bpp mode.  */
-static inline void
-copyarea_backward_8bpp(struct fb_info *info, u32 dx, u32 dy, u32 sx, u32 sy,
-		       u32 height, u32 width, u32 line_length,
-		       const struct fb_copyarea *area)
-{
-	struct tga_par *par = (struct tga_par *) info->par;
-	unsigned long i, left, yincr;
-	unsigned long depos, sepos, dealign, sealign;
-	u32 mask_first, mask_last;
-	unsigned long n32;
-	void __iomem *tga_regs;
-	void __iomem *tga_fb;
-
 	yincr = line_length;
 	if (dy > sy) {
 		dy += height - 1;
 		sy += height - 1;
 		yincr = -yincr;
 	}
+	backward = dy == sy && dx > sx && dx < sx + width;
 
 	/* Compute the offsets and alignments in the frame buffer.
 	   More than anything else, these control how we do copies.  */
-	depos = dy * line_length + dx + width;
-	sepos = sy * line_length + sx + width;
-	dealign = depos & 7;
-	sealign = sepos & 7;
-
-	/* ??? The documentation appears to be incorrect (or very
-	   misleading) wrt how pixel shifting works in backward copy
-	   mode, i.e. when PIXELSHIFT is negative.  I give up for now.
-	   Do handle the common case of co-aligned backward copies,
-	   but frob everything else back on generic code.  */
-	if (dealign != sealign) {
-		cfb_copyarea(info, area);
-		return;
-	}
-
-	/* We begin the copy with the trailing pixels of the
-	   unaligned destination.  */
-	mask_first = (1ul << dealign) - 1;
-	left = width - dealign;
-
-	/* Care for small copies.  */
-	if (dealign > width) {
-		mask_first ^= (1ul << (dealign - width)) - 1;
-		left = 0;
-	}
+	depos = dy * line_length + dx;
+	sepos = sy * line_length + sx;
+	if (backward)
+		depos += width, sepos += width;
 
 	/* Next copy full words at a time.  */
-	n32 = left / 32;
-	left %= 32;
+	n32 = width / 32;
+	last_step = width % 32;
 
 	/* Finally copy the unaligned head of the span.  */
-	mask_last = -1 << (32 - left);
+	mask_last = (1ul << last_step) - 1;
+
+	if (!backward) {
+		step = 32;
+		last_step = 32;
+	} else {
+		step = -32;
+		last_step = -last_step;
+		sepos -= 32;
+		depos -= 32;
+	}
 
 	tga_regs = par->tga_regs_base;
 	tga_fb = par->tga_fb_base;
@@ -1368,25 +1206,33 @@ copyarea_backward_8bpp(struct fb_info *info, u32 dx, u32 dy, u32 sx, u32 sy,
 
 		sfb = tga_fb + sepos;
 		dfb = tga_fb + depos;
-		if (mask_first) {
-			__raw_writel(mask_first, sfb);
-			wmb();
-			__raw_writel(mask_first, dfb);
-			wmb();
-		}
 
-		for (j = 0; j < n32; ++j) {
-			sfb -= 32;
-			dfb -= 32;
+		for (j = 0; j < n32; j++) {
+			if (j < 2 && j + 1 < n32 && !backward &&
+			    !(((unsigned long)sfb | (unsigned long)dfb) & 63)) {
+				do {
+					__raw_writel(sfb - tga_fb, tga_regs+TGA_COPY64_SRC);
+					wmb();
+					__raw_writel(dfb - tga_fb, tga_regs+TGA_COPY64_DST);
+					wmb();
+					sfb += 64;
+					dfb += 64;
+					j += 2;
+				} while (j + 1 < n32);
+				j--;
+				continue;
+			}
 			__raw_writel(0xffffffff, sfb);
 			wmb();
 			__raw_writel(0xffffffff, dfb);
 			wmb();
+			sfb += step;
+			dfb += step;
 		}
 
 		if (mask_last) {
-			sfb -= 32;
-			dfb -= 32;
+			sfb += last_step - step;
+			dfb += last_step - step;
 			__raw_writel(mask_last, sfb);
 			wmb();
 			__raw_writel(mask_last, dfb);
@@ -1434,7 +1280,7 @@ tgafb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 	bpp = info->var.bits_per_pixel;
 
 	/* Detect copies of the entire line.  */
-	if (width * (bpp >> 3) == line_length) {
+	if (!(line_length & 63) && width * (bpp >> 3) == line_length) {
 		if (bpp == 8)
 			copyarea_line_8bpp(info, dy, sy, height, width);
 		else
@@ -1447,14 +1293,9 @@ tgafb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 	else if (bpp == 32)
 		cfb_copyarea(info, area);
 
-	/* Detect overlapping source and destination that requires
-	   a backward copy.  */
-	else if (dy == sy && dx > sx && dx < sx + width)
-		copyarea_backward_8bpp(info, dx, dy, sx, sy, height,
-				       width, line_length, area);
 	else
-		copyarea_foreward_8bpp(info, dx, dy, sx, sy, height,
-				       width, line_length);
+		copyarea_8bpp(info, dx, dy, sx, sy, height,
+			      width, line_length, area);
 }
 
 
@@ -1470,6 +1311,7 @@ tgafb_init_fix(struct fb_info *info)
 	int tga_bus_tc = TGA_BUS_TC(par->dev);
 	u8 tga_type = par->tga_type;
 	const char *tga_type_name = NULL;
+	unsigned memory_size;
 
 	switch (tga_type) {
 	case TGA_TYPE_8PLANE:
@@ -1477,22 +1319,27 @@ tgafb_init_fix(struct fb_info *info)
 			tga_type_name = "Digital ZLXp-E1";
 		if (tga_bus_tc)
 			tga_type_name = "Digital ZLX-E1";
+		memory_size = 2097152;
 		break;
 	case TGA_TYPE_24PLANE:
 		if (tga_bus_pci)
 			tga_type_name = "Digital ZLXp-E2";
 		if (tga_bus_tc)
 			tga_type_name = "Digital ZLX-E2";
+		memory_size = 8388608;
 		break;
 	case TGA_TYPE_24PLUSZ:
 		if (tga_bus_pci)
 			tga_type_name = "Digital ZLXp-E3";
 		if (tga_bus_tc)
 			tga_type_name = "Digital ZLX-E3";
+		memory_size = 16777216;
 		break;
 	}
-	if (!tga_type_name)
+	if (!tga_type_name) {
 		tga_type_name = "Unknown";
+		memory_size = 16777216;
+	}
 
 	strlcpy(info->fix.id, tga_type_name, sizeof(info->fix.id));
 
@@ -1502,9 +1349,8 @@ tgafb_init_fix(struct fb_info *info)
 			    ? FB_VISUAL_PSEUDOCOLOR
 			    : FB_VISUAL_DIRECTCOLOR);
 
-	info->fix.line_length = par->xres * (par->bits_per_pixel >> 3);
 	info->fix.smem_start = (size_t) par->tga_fb_base;
-	info->fix.smem_len = info->fix.line_length * par->yres;
+	info->fix.smem_len = memory_size;
 	info->fix.mmio_start = (size_t) par->tga_regs_base;
 	info->fix.mmio_len = 512;
 
@@ -1628,6 +1474,9 @@ static int tgafb_register(struct device *dev)
 		modedb_tga = &modedb_tc;
 		modedbsize_tga = 1;
 	}
+
+	tgafb_init_fix(info);
+
 	ret = fb_find_mode(&info->var, info,
 			   mode_option ? mode_option : mode_option_tga,
 			   modedb_tga, modedbsize_tga, NULL,
@@ -1645,7 +1494,6 @@ static int tgafb_register(struct device *dev)
 	}
 
 	tgafb_set_par(info);
-	tgafb_init_fix(info);
 
 	if (register_framebuffer(info) < 0) {
 		printk(KERN_ERR "tgafb: Could not register framebuffer\n");
diff --git a/drivers/video/tmiofb.c b/drivers/video/fbdev/tmiofb.c
index 7fb4e321a431..7fb4e321a431 100644
--- a/drivers/video/tmiofb.c
+++ b/drivers/video/fbdev/tmiofb.c
diff --git a/drivers/video/tridentfb.c b/drivers/video/fbdev/tridentfb.c
index 7ed9a227f5ea..7ed9a227f5ea 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/fbdev/tridentfb.c
diff --git a/drivers/video/udlfb.c b/drivers/video/fbdev/udlfb.c
index 77b890e4d296..77b890e4d296 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
diff --git a/drivers/video/uvesafb.c b/drivers/video/fbdev/uvesafb.c
index 256fba7f4641..509d452e8f91 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/fbdev/uvesafb.c
@@ -190,7 +190,7 @@ static int uvesafb_exec(struct uvesafb_ktask *task)
 	uvfb_tasks[seq] = task;
 	mutex_unlock(&uvfb_lock);
 
-	err = cn_netlink_send(m, 0, GFP_KERNEL);
+	err = cn_netlink_send(m, 0, 0, GFP_KERNEL);
 	if (err == -ESRCH) {
 		/*
 		 * Try to start the userspace helper if sending
@@ -204,7 +204,7 @@ static int uvesafb_exec(struct uvesafb_ktask *task)
 					"helper is installed and executable\n");
 		} else {
 			v86d_started = 1;
-			err = cn_netlink_send(m, 0, gfp_any());
+			err = cn_netlink_send(m, 0, 0, gfp_any());
 			if (err == -ENOBUFS)
 				err = 0;
 		}
@@ -1474,12 +1474,7 @@ static void uvesafb_init_info(struct fb_info *info, struct vbe_mode_ib *mode)
 	 *                 used video mode, i.e. the minimum amount of
 	 *                 memory we need.
 	 */
-	if (mode != NULL) {
-		size_vmode = info->var.yres * mode->bytes_per_scan_line;
-	} else {
-		size_vmode = info->var.yres * info->var.xres *
-			     ((info->var.bits_per_pixel + 7) >> 3);
-	}
+	size_vmode = info->var.yres * mode->bytes_per_scan_line;
 
 	/*
 	 *   size_total -- all video memory we have. Used for mtrr
@@ -1812,11 +1807,9 @@ static int uvesafb_remove(struct platform_device *dev)
 		fb_destroy_modedb(info->monspecs.modedb);
 		fb_dealloc_cmap(&info->cmap);
 
-		if (par) {
-			kfree(par->vbe_modes);
-			kfree(par->vbe_state_orig);
-			kfree(par->vbe_state_saved);
-		}
+		kfree(par->vbe_modes);
+		kfree(par->vbe_state_orig);
+		kfree(par->vbe_state_saved);
 
 		framebuffer_release(info);
 	}
diff --git a/drivers/video/valkyriefb.c b/drivers/video/fbdev/valkyriefb.c
index 97cb9bd1d1dd..97cb9bd1d1dd 100644
--- a/drivers/video/valkyriefb.c
+++ b/drivers/video/fbdev/valkyriefb.c
diff --git a/drivers/video/valkyriefb.h b/drivers/video/fbdev/valkyriefb.h
index d787441e5a42..d787441e5a42 100644
--- a/drivers/video/valkyriefb.h
+++ b/drivers/video/fbdev/valkyriefb.h
diff --git a/drivers/video/vermilion/Makefile b/drivers/video/fbdev/vermilion/Makefile
index cc21a656153d..cc21a656153d 100644
--- a/drivers/video/vermilion/Makefile
+++ b/drivers/video/fbdev/vermilion/Makefile
diff --git a/drivers/video/vermilion/cr_pll.c b/drivers/video/fbdev/vermilion/cr_pll.c
index ebc6e6e0dd0f..ebc6e6e0dd0f 100644
--- a/drivers/video/vermilion/cr_pll.c
+++ b/drivers/video/fbdev/vermilion/cr_pll.c
diff --git a/drivers/video/vermilion/vermilion.c b/drivers/video/fbdev/vermilion/vermilion.c
index 048a66640b03..048a66640b03 100644
--- a/drivers/video/vermilion/vermilion.c
+++ b/drivers/video/fbdev/vermilion/vermilion.c
diff --git a/drivers/video/vermilion/vermilion.h b/drivers/video/fbdev/vermilion/vermilion.h
index 43d11ec197fc..43d11ec197fc 100644
--- a/drivers/video/vermilion/vermilion.h
+++ b/drivers/video/fbdev/vermilion/vermilion.h
diff --git a/drivers/video/vesafb.c b/drivers/video/fbdev/vesafb.c
index 1c7da3b098d6..6170e7f58640 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/fbdev/vesafb.c
@@ -179,7 +179,6 @@ static void vesafb_destroy(struct fb_info *info)
 	if (info->screen_base)
 		iounmap(info->screen_base);
 	release_mem_region(info->apertures->ranges[0].base, info->apertures->ranges[0].size);
-	framebuffer_release(info);
 }
 
 static struct fb_ops vesafb_ops = {
@@ -297,6 +296,7 @@ static int vesafb_probe(struct platform_device *dev)
 		release_mem_region(vesafb_fix.smem_start, size_total);
 		return -ENOMEM;
 	}
+	platform_set_drvdata(dev, info);
 	info->pseudo_palette = info->par;
 	info->par = NULL;
 
@@ -499,12 +499,23 @@ err:
 	return err;
 }
 
+static int vesafb_remove(struct platform_device *pdev)
+{
+	struct fb_info *info = platform_get_drvdata(pdev);
+
+	unregister_framebuffer(info);
+	framebuffer_release(info);
+
+	return 0;
+}
+
 static struct platform_driver vesafb_driver = {
 	.driver = {
 		.name = "vesa-framebuffer",
 		.owner = THIS_MODULE,
 	},
 	.probe = vesafb_probe,
+	.remove = vesafb_remove,
 };
 
 module_platform_driver(vesafb_driver);
diff --git a/drivers/video/vfb.c b/drivers/video/fbdev/vfb.c
index 70a897b1e458..70a897b1e458 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/fbdev/vfb.c
diff --git a/drivers/video/vga16fb.c b/drivers/video/fbdev/vga16fb.c
index 283d335a759f..283d335a759f 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/fbdev/vga16fb.c
diff --git a/drivers/video/via/Makefile b/drivers/video/fbdev/via/Makefile
index 159f26e6adb5..159f26e6adb5 100644
--- a/drivers/video/via/Makefile
+++ b/drivers/video/fbdev/via/Makefile
diff --git a/drivers/video/via/accel.c b/drivers/video/fbdev/via/accel.c
index 4b67b8e6030a..4b67b8e6030a 100644
--- a/drivers/video/via/accel.c
+++ b/drivers/video/fbdev/via/accel.c
diff --git a/drivers/video/via/accel.h b/drivers/video/fbdev/via/accel.h
index 79d5e10cc835..79d5e10cc835 100644
--- a/drivers/video/via/accel.h
+++ b/drivers/video/fbdev/via/accel.h
diff --git a/drivers/video/via/chip.h b/drivers/video/fbdev/via/chip.h
index d32a5076c20f..d32a5076c20f 100644
--- a/drivers/video/via/chip.h
+++ b/drivers/video/fbdev/via/chip.h
diff --git a/drivers/video/via/debug.h b/drivers/video/fbdev/via/debug.h
index 86eacc2017f3..86eacc2017f3 100644
--- a/drivers/video/via/debug.h
+++ b/drivers/video/fbdev/via/debug.h
diff --git a/drivers/video/via/dvi.c b/drivers/video/fbdev/via/dvi.c
index 7789553952d3..7789553952d3 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/fbdev/via/dvi.c
diff --git a/drivers/video/via/dvi.h b/drivers/video/fbdev/via/dvi.h
index 4c6bfba57d11..4c6bfba57d11 100644
--- a/drivers/video/via/dvi.h
+++ b/drivers/video/fbdev/via/dvi.h
diff --git a/drivers/video/via/global.c b/drivers/video/fbdev/via/global.c
index 3102171c1674..3102171c1674 100644
--- a/drivers/video/via/global.c
+++ b/drivers/video/fbdev/via/global.c
diff --git a/drivers/video/via/global.h b/drivers/video/fbdev/via/global.h
index 275dbbbd6b81..275dbbbd6b81 100644
--- a/drivers/video/via/global.h
+++ b/drivers/video/fbdev/via/global.h
diff --git a/drivers/video/via/hw.c b/drivers/video/fbdev/via/hw.c
index 22450908306c..22450908306c 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/fbdev/via/hw.c
diff --git a/drivers/video/via/hw.h b/drivers/video/fbdev/via/hw.h
index 3be073c58b03..3be073c58b03 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/fbdev/via/hw.h
diff --git a/drivers/video/via/ioctl.c b/drivers/video/fbdev/via/ioctl.c
index ea1c51428823..ea1c51428823 100644
--- a/drivers/video/via/ioctl.c
+++ b/drivers/video/fbdev/via/ioctl.c
diff --git a/drivers/video/via/ioctl.h b/drivers/video/fbdev/via/ioctl.h
index 6010d10b59e8..6010d10b59e8 100644
--- a/drivers/video/via/ioctl.h
+++ b/drivers/video/fbdev/via/ioctl.h
diff --git a/drivers/video/via/lcd.c b/drivers/video/fbdev/via/lcd.c
index 5d21ff436ec8..5d21ff436ec8 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/fbdev/via/lcd.c
diff --git a/drivers/video/via/lcd.h b/drivers/video/fbdev/via/lcd.h
index 5c988a063ad5..5c988a063ad5 100644
--- a/drivers/video/via/lcd.h
+++ b/drivers/video/fbdev/via/lcd.h
diff --git a/drivers/video/via/share.h b/drivers/video/fbdev/via/share.h
index 65c65c611e0a..65c65c611e0a 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/fbdev/via/share.h
diff --git a/drivers/video/via/tblDPASetting.c b/drivers/video/fbdev/via/tblDPASetting.c
index 73bb554e7c1e..73bb554e7c1e 100644
--- a/drivers/video/via/tblDPASetting.c
+++ b/drivers/video/fbdev/via/tblDPASetting.c
diff --git a/drivers/video/via/tblDPASetting.h b/drivers/video/fbdev/via/tblDPASetting.h
index 6db61519cb5d..6db61519cb5d 100644
--- a/drivers/video/via/tblDPASetting.h
+++ b/drivers/video/fbdev/via/tblDPASetting.h
diff --git a/drivers/video/via/via-core.c b/drivers/video/fbdev/via/via-core.c
index 6e274825fb31..6e274825fb31 100644
--- a/drivers/video/via/via-core.c
+++ b/drivers/video/fbdev/via/via-core.c
diff --git a/drivers/video/via/via-gpio.c b/drivers/video/fbdev/via/via-gpio.c
index e408679081ab..e408679081ab 100644
--- a/drivers/video/via/via-gpio.c
+++ b/drivers/video/fbdev/via/via-gpio.c
diff --git a/drivers/video/via/via_aux.c b/drivers/video/fbdev/via/via_aux.c
index 4a0a55cdac3d..4a0a55cdac3d 100644
--- a/drivers/video/via/via_aux.c
+++ b/drivers/video/fbdev/via/via_aux.c
diff --git a/drivers/video/via/via_aux.h b/drivers/video/fbdev/via/via_aux.h
index a8de3f038cea..a8de3f038cea 100644
--- a/drivers/video/via/via_aux.h
+++ b/drivers/video/fbdev/via/via_aux.h
diff --git a/drivers/video/via/via_aux_ch7301.c b/drivers/video/fbdev/via/via_aux_ch7301.c
index 1cbe5037a6b0..1cbe5037a6b0 100644
--- a/drivers/video/via/via_aux_ch7301.c
+++ b/drivers/video/fbdev/via/via_aux_ch7301.c
diff --git a/drivers/video/via/via_aux_edid.c b/drivers/video/fbdev/via/via_aux_edid.c
index 754d4509033f..754d4509033f 100644
--- a/drivers/video/via/via_aux_edid.c
+++ b/drivers/video/fbdev/via/via_aux_edid.c
diff --git a/drivers/video/via/via_aux_sii164.c b/drivers/video/fbdev/via/via_aux_sii164.c
index ca1b35f033b1..ca1b35f033b1 100644
--- a/drivers/video/via/via_aux_sii164.c
+++ b/drivers/video/fbdev/via/via_aux_sii164.c
diff --git a/drivers/video/via/via_aux_vt1621.c b/drivers/video/fbdev/via/via_aux_vt1621.c
index 38eca8479898..38eca8479898 100644
--- a/drivers/video/via/via_aux_vt1621.c
+++ b/drivers/video/fbdev/via/via_aux_vt1621.c
diff --git a/drivers/video/via/via_aux_vt1622.c b/drivers/video/fbdev/via/via_aux_vt1622.c
index 8c79c68ba683..8c79c68ba683 100644
--- a/drivers/video/via/via_aux_vt1622.c
+++ b/drivers/video/fbdev/via/via_aux_vt1622.c
diff --git a/drivers/video/via/via_aux_vt1625.c b/drivers/video/fbdev/via/via_aux_vt1625.c
index 03eb30165d36..03eb30165d36 100644
--- a/drivers/video/via/via_aux_vt1625.c
+++ b/drivers/video/fbdev/via/via_aux_vt1625.c
diff --git a/drivers/video/via/via_aux_vt1631.c b/drivers/video/fbdev/via/via_aux_vt1631.c
index 06e742f1f723..06e742f1f723 100644
--- a/drivers/video/via/via_aux_vt1631.c
+++ b/drivers/video/fbdev/via/via_aux_vt1631.c
diff --git a/drivers/video/via/via_aux_vt1632.c b/drivers/video/fbdev/via/via_aux_vt1632.c
index d24f4cd97401..d24f4cd97401 100644
--- a/drivers/video/via/via_aux_vt1632.c
+++ b/drivers/video/fbdev/via/via_aux_vt1632.c
diff --git a/drivers/video/via/via_aux_vt1636.c b/drivers/video/fbdev/via/via_aux_vt1636.c
index 9e015c101d4d..9e015c101d4d 100644
--- a/drivers/video/via/via_aux_vt1636.c
+++ b/drivers/video/fbdev/via/via_aux_vt1636.c
diff --git a/drivers/video/via/via_clock.c b/drivers/video/fbdev/via/via_clock.c
index db1e39277e32..db1e39277e32 100644
--- a/drivers/video/via/via_clock.c
+++ b/drivers/video/fbdev/via/via_clock.c
diff --git a/drivers/video/via/via_clock.h b/drivers/video/fbdev/via/via_clock.h
index 88714ae0d157..88714ae0d157 100644
--- a/drivers/video/via/via_clock.h
+++ b/drivers/video/fbdev/via/via_clock.h
diff --git a/drivers/video/via/via_i2c.c b/drivers/video/fbdev/via/via_i2c.c
index dd53058bbbb7..dd53058bbbb7 100644
--- a/drivers/video/via/via_i2c.c
+++ b/drivers/video/fbdev/via/via_i2c.c
diff --git a/drivers/video/via/via_modesetting.c b/drivers/video/fbdev/via/via_modesetting.c
index 0b414b09b9b4..0b414b09b9b4 100644
--- a/drivers/video/via/via_modesetting.c
+++ b/drivers/video/fbdev/via/via_modesetting.c
diff --git a/drivers/video/via/via_modesetting.h b/drivers/video/fbdev/via/via_modesetting.h
index f6a6503da3b3..f6a6503da3b3 100644
--- a/drivers/video/via/via_modesetting.h
+++ b/drivers/video/fbdev/via/via_modesetting.h
diff --git a/drivers/video/via/via_utility.c b/drivers/video/fbdev/via/via_utility.c
index 35458a5eadc8..35458a5eadc8 100644
--- a/drivers/video/via/via_utility.c
+++ b/drivers/video/fbdev/via/via_utility.c
diff --git a/drivers/video/via/via_utility.h b/drivers/video/fbdev/via/via_utility.h
index f23be1708c14..f23be1708c14 100644
--- a/drivers/video/via/via_utility.h
+++ b/drivers/video/fbdev/via/via_utility.h
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/fbdev/via/viafbdev.c
index 325c43c6ff97..325c43c6ff97 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/fbdev/via/viafbdev.c
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/fbdev/via/viafbdev.h
index f6b2ddf56e94..f6b2ddf56e94 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/fbdev/via/viafbdev.h
diff --git a/drivers/video/via/viamode.c b/drivers/video/fbdev/via/viamode.c
index 0666ab01cf4a..0666ab01cf4a 100644
--- a/drivers/video/via/viamode.c
+++ b/drivers/video/fbdev/via/viamode.c
diff --git a/drivers/video/via/viamode.h b/drivers/video/fbdev/via/viamode.h
index dd19106698e7..dd19106698e7 100644
--- a/drivers/video/via/viamode.h
+++ b/drivers/video/fbdev/via/viamode.h
diff --git a/drivers/video/via/vt1636.c b/drivers/video/fbdev/via/vt1636.c
index ee2903b472cf..ee2903b472cf 100644
--- a/drivers/video/via/vt1636.c
+++ b/drivers/video/fbdev/via/vt1636.c
diff --git a/drivers/video/via/vt1636.h b/drivers/video/fbdev/via/vt1636.h
index 4c1314e57468..4c1314e57468 100644
--- a/drivers/video/via/vt1636.h
+++ b/drivers/video/fbdev/via/vt1636.h
diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/fbdev/vt8500lcdfb.c
index a8f2b280f796..a8f2b280f796 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/fbdev/vt8500lcdfb.c
diff --git a/drivers/video/vt8500lcdfb.h b/drivers/video/fbdev/vt8500lcdfb.h
index 36ca3ca09d83..36ca3ca09d83 100644
--- a/drivers/video/vt8500lcdfb.h
+++ b/drivers/video/fbdev/vt8500lcdfb.h
diff --git a/drivers/video/vt8623fb.c b/drivers/video/fbdev/vt8623fb.c
index 5c7cbc6c6236..5c7cbc6c6236 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/fbdev/vt8623fb.c
diff --git a/drivers/video/w100fb.c b/drivers/video/fbdev/w100fb.c
index 10951c82f6ed..10951c82f6ed 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/fbdev/w100fb.c
diff --git a/drivers/video/w100fb.h b/drivers/video/fbdev/w100fb.h
index fffae7b4f6e9..fffae7b4f6e9 100644
--- a/drivers/video/w100fb.h
+++ b/drivers/video/fbdev/w100fb.h
diff --git a/drivers/video/wm8505fb.c b/drivers/video/fbdev/wm8505fb.c
index 537d199612af..537d199612af 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/fbdev/wm8505fb.c
diff --git a/drivers/video/wm8505fb_regs.h b/drivers/video/fbdev/wm8505fb_regs.h
index 4dd41668c6d1..4dd41668c6d1 100644
--- a/drivers/video/wm8505fb_regs.h
+++ b/drivers/video/fbdev/wm8505fb_regs.h
diff --git a/drivers/video/wmt_ge_rops.c b/drivers/video/fbdev/wmt_ge_rops.c
index b0a9f34b2e01..9df6fe78a44b 100644
--- a/drivers/video/wmt_ge_rops.c
+++ b/drivers/video/fbdev/wmt_ge_rops.c
@@ -18,7 +18,7 @@
 #include <linux/module.h>
 #include <linux/fb.h>
 #include <linux/platform_device.h>
-#include "fb_draw.h"
+#include "core/fb_draw.h"
 
 #define GE_COMMAND_OFF		0x00
 #define GE_DEPTH_OFF		0x04
diff --git a/drivers/video/wmt_ge_rops.h b/drivers/video/fbdev/wmt_ge_rops.h
index f73ec6377a46..f73ec6377a46 100644
--- a/drivers/video/wmt_ge_rops.h
+++ b/drivers/video/fbdev/wmt_ge_rops.h
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/fbdev/xen-fbfront.c
index 901014bbc821..901014bbc821 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/fbdev/xen-fbfront.c
diff --git a/drivers/video/xilinxfb.c b/drivers/video/fbdev/xilinxfb.c
index 6ff1a91e9dfd..553cff2f3f4c 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/fbdev/xilinxfb.c
@@ -33,7 +33,6 @@
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/io.h>
-#include <linux/xilinxfb.h>
 #include <linux/slab.h>
 
 #ifdef CONFIG_PPC_DCR
@@ -84,6 +83,20 @@
 
 #define PALETTE_ENTRIES_NO	16	/* passed to fb_alloc_cmap() */
 
+/* ML300/403 reference design framebuffer driver platform data struct */
+struct xilinxfb_platform_data {
+	u32 rotate_screen;      /* Flag to rotate display 180 degrees */
+	u32 screen_height_mm;   /* Physical dimensions of screen in mm */
+	u32 screen_width_mm;
+	u32 xres, yres;         /* resolution of screen in pixels */
+	u32 xvirt, yvirt;       /* resolution of memory buffer */
+
+	/* Physical address of framebuffer memory; If non-zero, driver
+	* will use provided memory address instead of allocating one from
+	* the consistent pool. */
+	u32 fb_phys;
+};
+
 /*
  * Default xilinxfb configuration
  */
diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig
index 39ac49e0682c..0037104d66ac 100644
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
@@ -54,7 +54,7 @@ config LOGO_PARISC_CLUT224
 
 config LOGO_SGI_CLUT224
 	bool "224-color SGI Linux logo"
-	depends on SGI_IP22 || SGI_IP27 || SGI_IP32 || X86_VISWS
+	depends on SGI_IP22 || SGI_IP27 || SGI_IP32
 	default y
 
 config LOGO_SUN_CLUT224
diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c
index b670cbda38e3..940cd196eef5 100644
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -81,7 +81,7 @@ const struct linux_logo * __init_refok fb_find_logo(int depth)
 		logo = &logo_parisc_clut224;
 #endif
 #ifdef CONFIG_LOGO_SGI_CLUT224
-		/* SGI Linux logo on MIPS/MIPS64 and VISWS */
+		/* SGI Linux logo on MIPS/MIPS64 */
 		logo = &logo_sgi_clut224;
 #endif
 #ifdef CONFIG_LOGO_SUN_CLUT224
diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
deleted file mode 100644
index 63b23f87081d..000000000000
--- a/drivers/video/omap2/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config OMAP2_VRFB
-	bool
-
-if ARCH_OMAP2PLUS
-
-source "drivers/video/omap2/dss/Kconfig"
-source "drivers/video/omap2/omapfb/Kconfig"
-source "drivers/video/omap2/displays-new/Kconfig"
-
-endif
diff --git a/drivers/video/output.c b/drivers/video/output.c
deleted file mode 100644
index 1446c49fe6af..000000000000
--- a/drivers/video/output.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- *  output.c - Display Output Switch driver
- *
- *  Copyright (C) 2006 Luming Yu <luming.yu@intel.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or (at
- *  your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-#include <linux/module.h>
-#include <linux/video_output.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/ctype.h>
-
-
-MODULE_DESCRIPTION("Display Output Switcher Lowlevel Control Abstraction");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Luming Yu <luming.yu@intel.com>");
-
-static ssize_t state_show(struct device *dev, struct device_attribute *attr,
-			  char *buf)
-{
-	ssize_t ret_size = 0;
-	struct output_device *od = to_output_device(dev);
-	if (od->props)
-		ret_size = sprintf(buf,"%.8x\n",od->props->get_status(od));
-	return ret_size;
-}
-
-static ssize_t state_store(struct device *dev, struct device_attribute *attr,
-			   const char *buf,size_t count)
-{
-	char *endp;
-	struct output_device *od = to_output_device(dev);
-	int request_state = simple_strtoul(buf,&endp,0);
-	size_t size = endp - buf;
-
-	if (isspace(*endp))
-		size++;
-	if (size != count)
-		return -EINVAL;
-
-	if (od->props) {
-		od->request_state = request_state;
-		od->props->set_state(od);
-	}
-	return count;
-}
-static DEVICE_ATTR_RW(state);
-
-static void video_output_release(struct device *dev)
-{
-	struct output_device *od = to_output_device(dev);
-	kfree(od);
-}
-
-static struct attribute *video_output_attrs[] = {
-	&dev_attr_state.attr,
-	NULL,
-};
-ATTRIBUTE_GROUPS(video_output);
-
-static struct class video_output_class = {
-	.name = "video_output",
-	.dev_release = video_output_release,
-	.dev_groups = video_output_groups,
-};
-
-struct output_device *video_output_register(const char *name,
-	struct device *dev,
-	void *devdata,
-	struct output_properties *op)
-{
-	struct output_device *new_dev;
-	int ret_code = 0;
-
-	new_dev = kzalloc(sizeof(struct output_device),GFP_KERNEL);
-	if (!new_dev) {
-		ret_code = -ENOMEM;
-		goto error_return;
-	}
-	new_dev->props = op;
-	new_dev->dev.class = &video_output_class;
-	new_dev->dev.parent = dev;
-	dev_set_name(&new_dev->dev, "%s", name);
-	dev_set_drvdata(&new_dev->dev, devdata);
-	ret_code = device_register(&new_dev->dev);
-	if (ret_code) {
-		kfree(new_dev);
-		goto error_return;
-	}
-	return new_dev;
-
-error_return:
-	return ERR_PTR(ret_code);
-}
-EXPORT_SYMBOL(video_output_register);
-
-void video_output_unregister(struct output_device *dev)
-{
-	if (!dev)
-		return;
-	device_unregister(&dev->dev);
-}
-EXPORT_SYMBOL(video_output_unregister);
-
-static void __exit video_output_class_exit(void)
-{
-	class_unregister(&video_output_class);
-}
-
-static int __init video_output_class_init(void)
-{
-	return class_register(&video_output_class);
-}
-
-postcore_initcall(video_output_class_init);
-module_exit(video_output_class_exit);
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
deleted file mode 100644
index bc74d0408998..000000000000
--- a/drivers/video/sgivwfb.c
+++ /dev/null
@@ -1,889 +0,0 @@
-/*
- *  linux/drivers/video/sgivwfb.c -- SGI DBE frame buffer device
- *
- *	Copyright (C) 1999 Silicon Graphics, Inc.
- *      Jeffrey Newquist, newquist@engr.sgi.som
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/mtrr.h>
-#include <asm/visws/sgivw.h>
-
-#define INCLUDE_TIMING_TABLE_DATA
-#define DBE_REG_BASE par->regs
-#include <video/sgivw.h>
-
-struct sgivw_par {
-	struct asregs *regs;
-	u32 cmap_fifo;
-	u_long timing_num;
-};
-
-#define FLATPANEL_SGI_1600SW	5
-
-/*
- *  RAM we reserve for the frame buffer. This defines the maximum screen
- *  size
- *
- *  The default can be overridden if the driver is compiled as a module
- */
-
-static int ypan = 0;
-static int ywrap = 0;
-
-static int flatpanel_id = -1;
-
-static struct fb_fix_screeninfo sgivwfb_fix = {
-	.id		= "SGI Vis WS FB",
-	.type		= FB_TYPE_PACKED_PIXELS,
-        .visual		= FB_VISUAL_PSEUDOCOLOR,
-	.mmio_start	= DBE_REG_PHYS,
-	.mmio_len	= DBE_REG_SIZE,
-        .accel		= FB_ACCEL_NONE,
-	.line_length	= 640,
-};
-
-static struct fb_var_screeninfo sgivwfb_var = {
-	/* 640x480, 8 bpp */
-	.xres		= 640,
-	.yres		= 480,
-	.xres_virtual	= 640,
-	.yres_virtual	= 480,
-	.bits_per_pixel	= 8,
-	.red		= { 0, 8, 0 },
-	.green		= { 0, 8, 0 },
-	.blue		= { 0, 8, 0 },
-	.height		= -1,
-	.width		= -1,
-	.pixclock	= 20000,
-	.left_margin	= 64,
-	.right_margin	= 64,
-	.upper_margin	= 32,
-	.lower_margin	= 32,
-	.hsync_len	= 64,
-	.vsync_len	= 2,
-	.vmode		= FB_VMODE_NONINTERLACED
-};
-
-static struct fb_var_screeninfo sgivwfb_var1600sw = {
-	/* 1600x1024, 8 bpp */
-	.xres		= 1600,
-	.yres		= 1024,
-	.xres_virtual	= 1600,
-	.yres_virtual	= 1024,
-	.bits_per_pixel	= 8,
-	.red		= { 0, 8, 0 },
-	.green		= { 0, 8, 0 },
-	.blue		= { 0, 8, 0 },
-	.height		= -1,
-	.width		= -1,
-	.pixclock	= 9353,
-	.left_margin	= 20,
-	.right_margin	= 30,
-	.upper_margin	= 37,
-	.lower_margin	= 3,
-	.hsync_len	= 20,
-	.vsync_len	= 3,
-	.vmode		= FB_VMODE_NONINTERLACED
-};
-
-/*
- *  Interface used by the world
- */
-int sgivwfb_init(void);
-
-static int sgivwfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
-static int sgivwfb_set_par(struct fb_info *info);
-static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
-			     u_int blue, u_int transp,
-			     struct fb_info *info);
-static int sgivwfb_mmap(struct fb_info *info,
-			struct vm_area_struct *vma);
-
-static struct fb_ops sgivwfb_ops = {
-	.owner		= THIS_MODULE,
-	.fb_check_var	= sgivwfb_check_var,
-	.fb_set_par	= sgivwfb_set_par,
-	.fb_setcolreg	= sgivwfb_setcolreg,
-	.fb_fillrect	= cfb_fillrect,
-	.fb_copyarea	= cfb_copyarea,
-	.fb_imageblit	= cfb_imageblit,
-	.fb_mmap	= sgivwfb_mmap,
-};
-
-/*
- *  Internal routines
- */
-static unsigned long bytes_per_pixel(int bpp)
-{
-	switch (bpp) {
-		case 8:
-			return 1;
-		case 16:
-			return 2;
-		case 32:
-			return 4;
-		default:
-			printk(KERN_INFO "sgivwfb: unsupported bpp %d\n", bpp);
-			return 0;
-	}
-}
-
-static unsigned long get_line_length(int xres_virtual, int bpp)
-{
-	return (xres_virtual * bytes_per_pixel(bpp));
-}
-
-/*
- * Function:	dbe_TurnOffDma
- * Parameters:	(None)
- * Description:	This should turn off the monitor and dbe.  This is used
- *              when switching between the serial console and the graphics
- *              console.
- */
-
-static void dbe_TurnOffDma(struct sgivw_par *par)
-{
-	unsigned int readVal;
-	int i;
-
-	// Check to see if things are already turned off:
-	// 1) Check to see if dbe is not using the internal dotclock.
-	// 2) Check to see if the xy counter in dbe is already off.
-
-	DBE_GETREG(ctrlstat, readVal);
-	if (GET_DBE_FIELD(CTRLSTAT, PCLKSEL, readVal) < 2)
-		return;
-
-	DBE_GETREG(vt_xy, readVal);
-	if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1)
-		return;
-
-	// Otherwise, turn off dbe
-
-	DBE_GETREG(ovr_control, readVal);
-	SET_DBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, readVal, 0);
-	DBE_SETREG(ovr_control, readVal);
-	udelay(1000);
-	DBE_GETREG(frm_control, readVal);
-	SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, readVal, 0);
-	DBE_SETREG(frm_control, readVal);
-	udelay(1000);
-	DBE_GETREG(did_control, readVal);
-	SET_DBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, readVal, 0);
-	DBE_SETREG(did_control, readVal);
-	udelay(1000);
-
-	// XXX HACK:
-	//
-	//    This was necessary for GBE--we had to wait through two
-	//    vertical retrace periods before the pixel DMA was
-	//    turned off for sure.  I've left this in for now, in
-	//    case dbe needs it.
-
-	for (i = 0; i < 10000; i++) {
-		DBE_GETREG(frm_inhwctrl, readVal);
-		if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) ==
-		    0)
-			udelay(10);
-		else {
-			DBE_GETREG(ovr_inhwctrl, readVal);
-			if (GET_DBE_FIELD
-			    (OVR_INHWCTRL, OVR_DMA_ENABLE, readVal) == 0)
-				udelay(10);
-			else {
-				DBE_GETREG(did_inhwctrl, readVal);
-				if (GET_DBE_FIELD
-				    (DID_INHWCTRL, DID_DMA_ENABLE,
-				     readVal) == 0)
-					udelay(10);
-				else
-					break;
-			}
-		}
-	}
-}
-
-/*
- *  Set the User Defined Part of the Display. Again if par use it to get
- *  real video mode.
- */
-static int sgivwfb_check_var(struct fb_var_screeninfo *var, 
-			     struct fb_info *info)
-{
-	struct sgivw_par *par = (struct sgivw_par *)info->par;
-	struct dbe_timing_info *timing;
-	u_long line_length;
-	u_long min_mode;
-	int req_dot;
-	int test_mode;
-
-	/*
-	 *  FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
-	 *  as FB_VMODE_SMOOTH_XPAN is only used internally
-	 */
-
-	if (var->vmode & FB_VMODE_CONUPDATE) {
-		var->vmode |= FB_VMODE_YWRAP;
-		var->xoffset = info->var.xoffset;
-		var->yoffset = info->var.yoffset;
-	}
-
-	/* XXX FIXME - forcing var's */
-	var->xoffset = 0;
-	var->yoffset = 0;
-
-	/* Limit bpp to 8, 16, and 32 */
-	if (var->bits_per_pixel <= 8)
-		var->bits_per_pixel = 8;
-	else if (var->bits_per_pixel <= 16)
-		var->bits_per_pixel = 16;
-	else if (var->bits_per_pixel <= 32)
-		var->bits_per_pixel = 32;
-	else
-		return -EINVAL;
-
-	var->grayscale = 0;	/* No grayscale for now */
-
-	/* determine valid resolution and timing */
-	for (min_mode = 0; min_mode < ARRAY_SIZE(dbeVTimings); min_mode++) {
-		if (dbeVTimings[min_mode].width >= var->xres &&
-		    dbeVTimings[min_mode].height >= var->yres)
-			break;
-	}
-
-	if (min_mode == ARRAY_SIZE(dbeVTimings))
-		return -EINVAL;	/* Resolution to high */
-
-	/* XXX FIXME - should try to pick best refresh rate */
-	/* for now, pick closest dot-clock within 3MHz */
-	req_dot = PICOS2KHZ(var->pixclock);
-	printk(KERN_INFO "sgivwfb: requested pixclock=%d ps (%d KHz)\n",
-	       var->pixclock, req_dot);
-	test_mode = min_mode;
-	while (dbeVTimings[min_mode].width == dbeVTimings[test_mode].width) {
-		if (dbeVTimings[test_mode].cfreq + 3000 > req_dot)
-			break;
-		test_mode++;
-	}
-	if (dbeVTimings[min_mode].width != dbeVTimings[test_mode].width)
-		test_mode--;
-	min_mode = test_mode;
-	timing = &dbeVTimings[min_mode];
-	printk(KERN_INFO "sgivwfb: granted dot-clock=%d KHz\n", timing->cfreq);
-
-	/* Adjust virtual resolution, if necessary */
-	if (var->xres > var->xres_virtual || (!ywrap && !ypan))
-		var->xres_virtual = var->xres;
-	if (var->yres > var->yres_virtual || (!ywrap && !ypan))
-		var->yres_virtual = var->yres;
-
-	/*
-	 *  Memory limit
-	 */
-	line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
-	if (line_length * var->yres_virtual > sgivwfb_mem_size)
-		return -ENOMEM;	/* Virtual resolution to high */
-
-	info->fix.line_length = line_length;
-
-	switch (var->bits_per_pixel) {
-	case 8:
-		var->red.offset = 0;
-		var->red.length = 8;
-		var->green.offset = 0;
-		var->green.length = 8;
-		var->blue.offset = 0;
-		var->blue.length = 8;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		break;
-	case 16:		/* RGBA 5551 */
-		var->red.offset = 11;
-		var->red.length = 5;
-		var->green.offset = 6;
-		var->green.length = 5;
-		var->blue.offset = 1;
-		var->blue.length = 5;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		break;
-	case 32:		/* RGB 8888 */
-		var->red.offset = 0;
-		var->red.length = 8;
-		var->green.offset = 8;
-		var->green.length = 8;
-		var->blue.offset = 16;
-		var->blue.length = 8;
-		var->transp.offset = 24;
-		var->transp.length = 8;
-		break;
-	}
-	var->red.msb_right = 0;
-	var->green.msb_right = 0;
-	var->blue.msb_right = 0;
-	var->transp.msb_right = 0;
-
-	/* set video timing information */
-	var->pixclock = KHZ2PICOS(timing->cfreq);
-	var->left_margin = timing->htotal - timing->hsync_end;
-	var->right_margin = timing->hsync_start - timing->width;
-	var->upper_margin = timing->vtotal - timing->vsync_end;
-	var->lower_margin = timing->vsync_start - timing->height;
-	var->hsync_len = timing->hsync_end - timing->hsync_start;
-	var->vsync_len = timing->vsync_end - timing->vsync_start;
-
-	/* Ouch. This breaks the rules but timing_num is only important if you
-	* change a video mode */
-	par->timing_num = min_mode;
-
-	printk(KERN_INFO "sgivwfb: new video mode xres=%d yres=%d bpp=%d\n",
-		var->xres, var->yres, var->bits_per_pixel);
-	printk(KERN_INFO "         vxres=%d vyres=%d\n", var->xres_virtual,
-		var->yres_virtual);
-	return 0;
-}
-
-/*
- *  Setup flatpanel related registers.
- */
-static void sgivwfb_setup_flatpanel(struct sgivw_par *par, struct dbe_timing_info *currentTiming)
-{
-	int fp_wid, fp_hgt, fp_vbs, fp_vbe;
-	u32 outputVal = 0;
-
-	SET_DBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal, 
-		(currentTiming->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1);
-	SET_DBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal, 
-		(currentTiming->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1);
-	DBE_SETREG(vt_flags, outputVal);
-
-	/* Turn on the flat panel */
-	switch (flatpanel_id) {
-		case FLATPANEL_SGI_1600SW:
-			fp_wid = 1600;
-			fp_hgt = 1024;
-			fp_vbs = 0;
-			fp_vbe = 1600;
-			currentTiming->pll_m = 4;
-			currentTiming->pll_n = 1;
-			currentTiming->pll_p = 0;
-			break;
-		default:
-      			fp_wid = fp_hgt = fp_vbs = fp_vbe = 0xfff;
-  	}
-
-	outputVal = 0;
-	SET_DBE_FIELD(FP_DE, FP_DE_ON, outputVal, fp_vbs);
-	SET_DBE_FIELD(FP_DE, FP_DE_OFF, outputVal, fp_vbe);
-	DBE_SETREG(fp_de, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(FP_HDRV, FP_HDRV_OFF, outputVal, fp_wid);
-	DBE_SETREG(fp_hdrv, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(FP_VDRV, FP_VDRV_ON, outputVal, 1);
-	SET_DBE_FIELD(FP_VDRV, FP_VDRV_OFF, outputVal, fp_hgt + 1);
-	DBE_SETREG(fp_vdrv, outputVal);
-}
-
-/*
- *  Set the hardware according to 'par'.
- */
-static int sgivwfb_set_par(struct fb_info *info)
-{
-	struct sgivw_par *par = info->par;
-	int i, j, htmp, temp;
-	u32 readVal, outputVal;
-	int wholeTilesX, maxPixelsPerTileX;
-	int frmWrite1, frmWrite2, frmWrite3b;
-	struct dbe_timing_info *currentTiming; /* Current Video Timing */
-	int xpmax, ypmax;	// Monitor resolution
-	int bytesPerPixel;	// Bytes per pixel
-
-	currentTiming = &dbeVTimings[par->timing_num];
-	bytesPerPixel = bytes_per_pixel(info->var.bits_per_pixel);
-	xpmax = currentTiming->width;
-	ypmax = currentTiming->height;
-
-	/* dbe_InitGraphicsBase(); */
-	/* Turn on dotclock PLL */
-	DBE_SETREG(ctrlstat, 0x20000000);
-
-	dbe_TurnOffDma(par);
-
-	/* dbe_CalculateScreenParams(); */
-	maxPixelsPerTileX = 512 / bytesPerPixel;
-	wholeTilesX = xpmax / maxPixelsPerTileX;
-	if (wholeTilesX * maxPixelsPerTileX < xpmax)
-		wholeTilesX++;
-
-	printk(KERN_DEBUG "sgivwfb: pixPerTile=%d wholeTilesX=%d\n",
-	       maxPixelsPerTileX, wholeTilesX);
-
-	/* dbe_InitGammaMap(); */
-	udelay(10);
-
-	for (i = 0; i < 256; i++) {
-		DBE_ISETREG(gmap, i, (i << 24) | (i << 16) | (i << 8));
-	}
-
-	/* dbe_TurnOn(); */
-	DBE_GETREG(vt_xy, readVal);
-	if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1) {
-		DBE_SETREG(vt_xy, 0x00000000);
-		udelay(1);
-	} else
-		dbe_TurnOffDma(par);
-
-	/* dbe_Initdbe(); */
-	for (i = 0; i < 256; i++) {
-		for (j = 0; j < 100; j++) {
-			DBE_GETREG(cm_fifo, readVal);
-			if (readVal != 0x00000000)
-				break;
-			else
-				udelay(10);
-		}
-
-		// DBE_ISETREG(cmap, i, 0x00000000);
-		DBE_ISETREG(cmap, i, (i << 8) | (i << 16) | (i << 24));
-	}
-
-	/* dbe_InitFramebuffer(); */
-	frmWrite1 = 0;
-	SET_DBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, frmWrite1,
-		      wholeTilesX);
-	SET_DBE_FIELD(FRM_SIZE_TILE, FRM_RHS, frmWrite1, 0);
-
-	switch (bytesPerPixel) {
-	case 1:
-		SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
-			      DBE_FRM_DEPTH_8);
-		break;
-	case 2:
-		SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
-			      DBE_FRM_DEPTH_16);
-		break;
-	case 4:
-		SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
-			      DBE_FRM_DEPTH_32);
-		break;
-	}
-
-	frmWrite2 = 0;
-	SET_DBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, frmWrite2, ypmax);
-
-	// Tell dbe about the framebuffer location and type
-	// XXX What format is the FRM_TILE_PTR??  64K aligned address?
-	frmWrite3b = 0;
-	SET_DBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, frmWrite3b,
-		      sgivwfb_mem_phys >> 9);
-	SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, frmWrite3b, 1);
-	SET_DBE_FIELD(FRM_CONTROL, FRM_LINEAR, frmWrite3b, 1);
-
-	/* Initialize DIDs */
-
-	outputVal = 0;
-	switch (bytesPerPixel) {
-	case 1:
-		SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_I8);
-		break;
-	case 2:
-		SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGBA5);
-		break;
-	case 4:
-		SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGB8);
-		break;
-	}
-	SET_DBE_FIELD(WID, BUF, outputVal, DBE_BMODE_BOTH);
-
-	for (i = 0; i < 32; i++) {
-		DBE_ISETREG(mode_regs, i, outputVal);
-	}
-
-	/* dbe_InitTiming(); */
-	DBE_SETREG(vt_intr01, 0xffffffff);
-	DBE_SETREG(vt_intr23, 0xffffffff);
-
-	DBE_GETREG(dotclock, readVal);
-	DBE_SETREG(dotclock, readVal & 0xffff);
-
-	DBE_SETREG(vt_xymax, 0x00000000);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_ON, outputVal,
-		      currentTiming->vsync_start);
-	SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_OFF, outputVal,
-		      currentTiming->vsync_end);
-	DBE_SETREG(vt_vsync, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_ON, outputVal,
-		      currentTiming->hsync_start);
-	SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_OFF, outputVal,
-		      currentTiming->hsync_end);
-	DBE_SETREG(vt_hsync, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_ON, outputVal,
-		      currentTiming->vblank_start);
-	SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_OFF, outputVal,
-		      currentTiming->vblank_end);
-	DBE_SETREG(vt_vblank, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_ON, outputVal,
-		      currentTiming->hblank_start);
-	SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_OFF, outputVal,
-		      currentTiming->hblank_end - 3);
-	DBE_SETREG(vt_hblank, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_ON, outputVal,
-		      currentTiming->vblank_start);
-	SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_OFF, outputVal,
-		      currentTiming->vblank_end);
-	DBE_SETREG(vt_vcmap, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_ON, outputVal,
-		      currentTiming->hblank_start);
-	SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_OFF, outputVal,
-		      currentTiming->hblank_end - 3);
-	DBE_SETREG(vt_hcmap, outputVal);
-
-	if (flatpanel_id != -1)
-		sgivwfb_setup_flatpanel(par, currentTiming);
-
-	outputVal = 0;
-	temp = currentTiming->vblank_start - currentTiming->vblank_end - 1;
-	if (temp > 0)
-		temp = -temp;
-
-	SET_DBE_FIELD(DID_START_XY, DID_STARTY, outputVal, (u32) temp);
-	if (currentTiming->hblank_end >= 20)
-		SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
-			      currentTiming->hblank_end - 20);
-	else
-		SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
-			      currentTiming->htotal - (20 -
-						       currentTiming->
-						       hblank_end));
-	DBE_SETREG(did_start_xy, outputVal);
-
-	outputVal = 0;
-	SET_DBE_FIELD(CRS_START_XY, CRS_STARTY, outputVal,
-		      (u32) (temp + 1));
-	if (currentTiming->hblank_end >= DBE_CRS_MAGIC)
-		SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
-			      currentTiming->hblank_end - DBE_CRS_MAGIC);
-	else
-		SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
-			      currentTiming->htotal - (DBE_CRS_MAGIC -
-						       currentTiming->
-						       hblank_end));
-	DBE_SETREG(crs_start_xy, outputVal);
-
-	outputVal = 0;
-	SET_DBE_FIELD(VC_START_XY, VC_STARTY, outputVal, (u32) temp);
-	SET_DBE_FIELD(VC_START_XY, VC_STARTX, outputVal,
-		      currentTiming->hblank_end - 4);
-	DBE_SETREG(vc_start_xy, outputVal);
-
-	DBE_SETREG(frm_size_tile, frmWrite1);
-	DBE_SETREG(frm_size_pixel, frmWrite2);
-
-	outputVal = 0;
-	SET_DBE_FIELD(DOTCLK, M, outputVal, currentTiming->pll_m - 1);
-	SET_DBE_FIELD(DOTCLK, N, outputVal, currentTiming->pll_n - 1);
-	SET_DBE_FIELD(DOTCLK, P, outputVal, currentTiming->pll_p);
-	SET_DBE_FIELD(DOTCLK, RUN, outputVal, 1);
-	DBE_SETREG(dotclock, outputVal);
-
-	udelay(11 * 1000);
-
-	DBE_SETREG(vt_vpixen, 0xffffff);
-	DBE_SETREG(vt_hpixen, 0xffffff);
-
-	outputVal = 0;
-	SET_DBE_FIELD(VT_XYMAX, VT_MAXX, outputVal, currentTiming->htotal);
-	SET_DBE_FIELD(VT_XYMAX, VT_MAXY, outputVal, currentTiming->vtotal);
-	DBE_SETREG(vt_xymax, outputVal);
-
-	outputVal = frmWrite1;
-	SET_DBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, outputVal, 1);
-	DBE_SETREG(frm_size_tile, outputVal);
-	DBE_SETREG(frm_size_tile, frmWrite1);
-
-	outputVal = 0;
-	SET_DBE_FIELD(OVR_WIDTH_TILE, OVR_FIFO_RESET, outputVal, 1);
-	DBE_SETREG(ovr_width_tile, outputVal);
-	DBE_SETREG(ovr_width_tile, 0);
-
-	DBE_SETREG(frm_control, frmWrite3b);
-	DBE_SETREG(did_control, 0);
-
-	// Wait for dbe to take frame settings
-	for (i = 0; i < 100000; i++) {
-		DBE_GETREG(frm_inhwctrl, readVal);
-		if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) !=
-		    0)
-			break;
-		else
-			udelay(1);
-	}
-
-	if (i == 100000)
-		printk(KERN_INFO
-		       "sgivwfb: timeout waiting for frame DMA enable.\n");
-
-	outputVal = 0;
-	htmp = currentTiming->hblank_end - 19;
-	if (htmp < 0)
-		htmp += currentTiming->htotal;	/* allow blank to wrap around */
-	SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_ON, outputVal, htmp);
-	SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_OFF, outputVal,
-		      ((htmp + currentTiming->width -
-			2) % currentTiming->htotal));
-	DBE_SETREG(vt_hpixen, outputVal);
-
-	outputVal = 0;
-	SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_OFF, outputVal,
-		      currentTiming->vblank_start);
-	SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_ON, outputVal,
-		      currentTiming->vblank_end);
-	DBE_SETREG(vt_vpixen, outputVal);
-
-	// Turn off mouse cursor
-	par->regs->crs_ctl = 0;
-
-	// XXX What's this section for??
-	DBE_GETREG(ctrlstat, readVal);
-	readVal &= 0x02000000;
-
-	if (readVal != 0) {
-		DBE_SETREG(ctrlstat, 0x30000000);
-	}
-	return 0;
-}
-
-/*
- *  Set a single color register. The values supplied are already
- *  rounded down to the hardware's capabilities (according to the
- *  entries in the var structure). Return != 0 for invalid regno.
- */
-
-static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
-			     u_int blue, u_int transp,
-			     struct fb_info *info)
-{
-	struct sgivw_par *par = (struct sgivw_par *) info->par;
-
-	if (regno > 255)
-		return 1;
-	red >>= 8;
-	green >>= 8;
-	blue >>= 8;
-
-	/* wait for the color map FIFO to have a free entry */
-	while (par->cmap_fifo == 0)
-		par->cmap_fifo = par->regs->cm_fifo;
-
-	par->regs->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
-	par->cmap_fifo--;	/* assume FIFO is filling up */
-	return 0;
-}
-
-static int sgivwfb_mmap(struct fb_info *info,
-			struct vm_area_struct *vma)
-{
-	int r;
-
-	pgprot_val(vma->vm_page_prot) =
-		pgprot_val(vma->vm_page_prot) | _PAGE_PCD;
-
-	r = vm_iomap_memory(vma, sgivwfb_mem_phys, sgivwfb_mem_size);
-
-	printk(KERN_DEBUG "sgivwfb: mmap framebuffer P(%lx)->V(%lx)\n",
-		sgivwfb_mem_phys + (vma->vm_pgoff << PAGE_SHIFT), vma->vm_start);
-
-	return r;
-}
-
-int __init sgivwfb_setup(char *options)
-{
-	char *this_opt;
-
-	if (!options || !*options)
-		return 0;
-
-	while ((this_opt = strsep(&options, ",")) != NULL) {
-		if (!strncmp(this_opt, "monitor:", 8)) {
-			if (!strncmp(this_opt + 8, "crt", 3))
-				flatpanel_id = -1;
-			else if (!strncmp(this_opt + 8, "1600sw", 6))
-				flatpanel_id = FLATPANEL_SGI_1600SW;
-		}
-	}
-	return 0;
-}
-
-/*
- *  Initialisation
- */
-static int sgivwfb_probe(struct platform_device *dev)
-{
-	struct sgivw_par *par;
-	struct fb_info *info;
-	char *monitor;
-
-	info = framebuffer_alloc(sizeof(struct sgivw_par) + sizeof(u32) * 16, &dev->dev);
-	if (!info)
-		return -ENOMEM;
-	par = info->par;
-
-	if (!request_mem_region(DBE_REG_PHYS, DBE_REG_SIZE, "sgivwfb")) {
-		printk(KERN_ERR "sgivwfb: couldn't reserve mmio region\n");
-		framebuffer_release(info);
-		return -EBUSY;
-	}
-
-	par->regs = (struct asregs *) ioremap_nocache(DBE_REG_PHYS, DBE_REG_SIZE);
-	if (!par->regs) {
-		printk(KERN_ERR "sgivwfb: couldn't ioremap registers\n");
-		goto fail_ioremap_regs;
-	}
-
-	mtrr_add(sgivwfb_mem_phys, sgivwfb_mem_size, MTRR_TYPE_WRCOMB, 1);
-
-	sgivwfb_fix.smem_start = sgivwfb_mem_phys;
-	sgivwfb_fix.smem_len = sgivwfb_mem_size;
-	sgivwfb_fix.ywrapstep = ywrap;
-	sgivwfb_fix.ypanstep = ypan;
-
-	info->fix = sgivwfb_fix;
-
-	switch (flatpanel_id) {
-		case FLATPANEL_SGI_1600SW:
-			info->var = sgivwfb_var1600sw;
-			monitor = "SGI 1600SW flatpanel";
-			break;
-		default:
-			info->var = sgivwfb_var;
-			monitor = "CRT";
-	}
-
-	printk(KERN_INFO "sgivwfb: %s monitor selected\n", monitor);
-
-	info->fbops = &sgivwfb_ops;
-	info->pseudo_palette = (void *) (par + 1);
-	info->flags = FBINFO_DEFAULT;
-
-	info->screen_base = ioremap_nocache((unsigned long) sgivwfb_mem_phys, sgivwfb_mem_size);
-	if (!info->screen_base) {
-		printk(KERN_ERR "sgivwfb: couldn't ioremap screen_base\n");
-		goto fail_ioremap_fbmem;
-	}
-
-	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
-		goto fail_color_map;
-
-	if (register_framebuffer(info) < 0) {
-		printk(KERN_ERR "sgivwfb: couldn't register framebuffer\n");
-		goto fail_register_framebuffer;
-	}
-
-	platform_set_drvdata(dev, info);
-
-	fb_info(info, "SGI DBE frame buffer device, using %ldK of video memory at %#lx\n",
-		sgivwfb_mem_size >> 10, sgivwfb_mem_phys);
-	return 0;
-
-fail_register_framebuffer:
-	fb_dealloc_cmap(&info->cmap);
-fail_color_map:
-	iounmap((char *) info->screen_base);
-fail_ioremap_fbmem:
-	iounmap(par->regs);
-fail_ioremap_regs:
-	release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
-	framebuffer_release(info);
-	return -ENXIO;
-}
-
-static int sgivwfb_remove(struct platform_device *dev)
-{
-	struct fb_info *info = platform_get_drvdata(dev);
-
-	if (info) {
-		struct sgivw_par *par = info->par;
-
-		unregister_framebuffer(info);
-		dbe_TurnOffDma(par);
-		iounmap(par->regs);
-		iounmap(info->screen_base);
-		release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
-		fb_dealloc_cmap(&info->cmap);
-		framebuffer_release(info);
-	}
-	return 0;
-}
-
-static struct platform_driver sgivwfb_driver = {
-	.probe	= sgivwfb_probe,
-	.remove	= sgivwfb_remove,
-	.driver	= {
-		.name	= "sgivwfb",
-	},
-};
-
-static struct platform_device *sgivwfb_device;
-
-int __init sgivwfb_init(void)
-{
-	int ret;
-
-#ifndef MODULE
-	char *option = NULL;
-
-	if (fb_get_options("sgivwfb", &option))
-		return -ENODEV;
-	sgivwfb_setup(option);
-#endif
-	ret = platform_driver_register(&sgivwfb_driver);
-	if (!ret) {
-		sgivwfb_device = platform_device_alloc("sgivwfb", 0);
-		if (sgivwfb_device) {
-			ret = platform_device_add(sgivwfb_device);
-		} else
-			ret = -ENOMEM;
-		if (ret) {
-			platform_driver_unregister(&sgivwfb_driver);
-			platform_device_put(sgivwfb_device);
-		}
-	}
-	return ret;
-}
-
-module_init(sgivwfb_init);
-
-#ifdef MODULE
-MODULE_LICENSE("GPL");
-
-static void __exit sgivwfb_exit(void)
-{
-	platform_device_unregister(sgivwfb_device);
-	platform_driver_unregister(&sgivwfb_driver);
-}
-
-module_exit(sgivwfb_exit);
-
-#endif				/* MODULE */