diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-05 16:14:12 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-05 16:14:12 -0700 |
| commit | 07c4dd3435aa387d3b58f4e941dc516513f14507 (patch) | |
| tree | 26ebc60562ba573ec499f850c53ffd48f2bfdf72 /drivers | |
| parent | Merge tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc (diff) | |
| parent | Revert "xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue" (diff) | |
| download | linux-dev-07c4dd3435aa387d3b58f4e941dc516513f14507.tar.xz linux-dev-07c4dd3435aa387d3b58f4e941dc516513f14507.zip | |
Merge tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and PHY updates from Greg KH:
"Here is the big USB pull request for 4.18-rc1.
Lots of stuff here, the highlights are:
- phy driver updates and new additions
- usual set of xhci driver updates
- normal set of musb updates
- gadget driver updates and new controllers
- typec work, it's getting closer to getting fully out of the staging
portion of the tree.
- lots of minor cleanups and bugfixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
Revert "xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue"
xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers
xhci: Allow more than 32 quirks
usb: xhci: force all memory allocations to node
selftests: add test for USB over IP driver
USB: typec: fsusb302: no need to check return value of debugfs_create_dir()
USB: gadget: udc: s3c2410_udc: no need to check return value of debugfs_create functions
USB: gadget: udc: renesas_usb3: no need to check return value of debugfs_create functions
USB: gadget: udc: pxa27x_udc: no need to check return value of debugfs_create functions
USB: gadget: udc: gr_udc: no need to check return value of debugfs_create functions
USB: gadget: udc: bcm63xx_udc: no need to check return value of debugfs_create functions
USB: udc: atmel_usba_udc: no need to check return value of debugfs_create functions
USB: dwc3: no need to check return value of debugfs_create functions
USB: dwc2: no need to check return value of debugfs_create functions
USB: core: no need to check return value of debugfs_create functions
USB: chipidea: no need to check return value of debugfs_create functions
USB: ehci-hcd: no need to check return value of debugfs_create functions
USB: fhci-hcd: no need to check return value of debugfs_create functions
USB: fotg210-hcd: no need to check return value of debugfs_create functions
USB: imx21-hcd: no need to check return value of debugfs_create functions
...
Diffstat (limited to 'drivers')
180 files changed, 10277 insertions, 3338 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 8d21b9825d71..fce9f2ca0570 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -202,8 +202,7 @@ config I2C_CHT_WC Note this controller is hooked up to a TI bq24292i charger-IC, combined with a FUSB302 Type-C port-controller as such it is advised - to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m - (the fusb302 driver currently is in drivers/staging). + to also select CONFIG_TYPEC_FUSB302=m. config I2C_NFORCE2 tristate "Nvidia nForce2, nForce3 and nForce4" diff --git a/drivers/nfc/pn533/usb.c b/drivers/nfc/pn533/usb.c index e153e8b64bb8..d5553c47014f 100644 --- a/drivers/nfc/pn533/usb.c +++ b/drivers/nfc/pn533/usb.c @@ -62,6 +62,9 @@ struct pn533_usb_phy { struct urb *out_urb; struct urb *in_urb; + struct urb *ack_urb; + u8 *ack_buffer; + struct pn533 *priv; }; @@ -150,13 +153,16 @@ static int pn533_usb_send_ack(struct pn533 *dev, gfp_t flags) struct pn533_usb_phy *phy = dev->phy; static const u8 ack[6] = {0x00, 0x00, 0xff, 0x00, 0xff, 0x00}; /* spec 7.1.1.3: Preamble, SoPC (2), ACK Code (2), Postamble */ - int rc; - phy->out_urb->transfer_buffer = (u8 *)ack; - phy->out_urb->transfer_buffer_length = sizeof(ack); - rc = usb_submit_urb(phy->out_urb, flags); + if (!phy->ack_buffer) { + phy->ack_buffer = kmemdup(ack, sizeof(ack), flags); + if (!phy->ack_buffer) + return -ENOMEM; + } - return rc; + phy->ack_urb->transfer_buffer = phy->ack_buffer; + phy->ack_urb->transfer_buffer_length = sizeof(ack); + return usb_submit_urb(phy->ack_urb, flags); } static int pn533_usb_send_frame(struct pn533 *dev, @@ -375,26 +381,31 @@ static int pn533_acr122_poweron_rdr(struct pn533_usb_phy *phy) /* Power on th reader (CCID cmd) */ u8 cmd[10] = {PN533_ACR122_PC_TO_RDR_ICCPOWERON, 0, 0, 0, 0, 0, 0, 3, 0, 0}; + char *buffer; + int transferred; int rc; void *cntx; struct pn533_acr122_poweron_rdr_arg arg; dev_dbg(&phy->udev->dev, "%s\n", __func__); + buffer = kmemdup(cmd, sizeof(cmd), GFP_KERNEL); + if (!buffer) + return -ENOMEM; + init_completion(&arg.done); cntx = phy->in_urb->context; /* backup context */ phy->in_urb->complete = pn533_acr122_poweron_rdr_resp; phy->in_urb->context = &arg; - phy->out_urb->transfer_buffer = cmd; - phy->out_urb->transfer_buffer_length = sizeof(cmd); - print_hex_dump_debug("ACR122 TX: ", DUMP_PREFIX_NONE, 16, 1, cmd, sizeof(cmd), false); - rc = usb_submit_urb(phy->out_urb, GFP_KERNEL); - if (rc) { + rc = usb_bulk_msg(phy->udev, phy->out_urb->pipe, buffer, sizeof(cmd), + &transferred, 0); + kfree(buffer); + if (rc || (transferred != sizeof(cmd))) { nfc_err(&phy->udev->dev, "Reader power on cmd error %d\n", rc); return rc; @@ -490,8 +501,9 @@ static int pn533_usb_probe(struct usb_interface *interface, phy->in_urb = usb_alloc_urb(0, GFP_KERNEL); phy->out_urb = usb_alloc_urb(0, GFP_KERNEL); + phy->ack_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!phy->in_urb || !phy->out_urb) + if (!phy->in_urb || !phy->out_urb || !phy->ack_urb) goto error; usb_fill_bulk_urb(phy->in_urb, phy->udev, @@ -501,7 +513,9 @@ static int pn533_usb_probe(struct usb_interface *interface, usb_fill_bulk_urb(phy->out_urb, phy->udev, usb_sndbulkpipe(phy->udev, out_endpoint), NULL, 0, pn533_send_complete, phy); - + usb_fill_bulk_urb(phy->ack_urb, phy->udev, + usb_sndbulkpipe(phy->udev, out_endpoint), + NULL, 0, pn533_send_complete, phy); switch (id->driver_info) { case PN533_DEVICE_STD: @@ -554,6 +568,7 @@ static int pn533_usb_probe(struct usb_interface *interface, error: usb_free_urb(phy->in_urb); usb_free_urb(phy->out_urb); + usb_free_urb(phy->ack_urb); usb_put_dev(phy->udev); kfree(in_buf); @@ -573,10 +588,13 @@ static void pn533_usb_disconnect(struct usb_interface *interface) usb_kill_urb(phy->in_urb); usb_kill_urb(phy->out_urb); + usb_kill_urb(phy->ack_urb); kfree(phy->in_urb->transfer_buffer); usb_free_urb(phy->in_urb); usb_free_urb(phy->out_urb); + usb_free_urb(phy->ack_urb); + kfree(phy->ack_buffer); nfc_info(&interface->dev, "NXP PN533 NFC device disconnected\n"); } diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig index 88ab4e25e34f..8857d00b3c65 100644 --- a/drivers/phy/mediatek/Kconfig +++ b/drivers/phy/mediatek/Kconfig @@ -12,3 +12,12 @@ config PHY_MTK_TPHY different banks layout, the T-PHY with shared banks between multi-ports is first version, otherwise is second veriosn, so you can easily distinguish them by banks layout. + +config PHY_MTK_XSPHY + tristate "MediaTek XS-PHY Driver" + depends on ARCH_MEDIATEK && OF + select GENERIC_PHY + help + Enable this to support the SuperSpeedPlus XS-PHY transceiver for + USB3.1 GEN2 controllers on MediaTek chips. The driver supports + multiple USB2.0, USB3.1 GEN2 ports. diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile index 763a92eefa00..e5074b607d3d 100644 --- a/drivers/phy/mediatek/Makefile +++ b/drivers/phy/mediatek/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o +obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o diff --git a/drivers/phy/mediatek/phy-mtk-xsphy.c b/drivers/phy/mediatek/phy-mtk-xsphy.c new file mode 100644 index 000000000000..020cd0227397 --- /dev/null +++ b/drivers/phy/mediatek/phy-mtk-xsphy.c @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MediaTek USB3.1 gen2 xsphy Driver + * + * Copyright (c) 2018 MediaTek Inc. + * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> + * + */ + +#include <dt-bindings/phy/phy.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +/* u2 phy banks */ +#define SSUSB_SIFSLV_MISC 0x000 +#define SSUSB_SIFSLV_U2FREQ 0x100 +#define SSUSB_SIFSLV_U2PHY_COM 0x300 + +/* u3 phy shared banks */ +#define SSPXTP_SIFSLV_DIG_GLB 0x000 +#define SSPXTP_SIFSLV_PHYA_GLB 0x100 + +/* u3 phy banks */ +#define SSPXTP_SIFSLV_DIG_LN_TOP 0x000 +#define SSPXTP_SIFSLV_DIG_LN_TX0 0x100 +#define SSPXTP_SIFSLV_DIG_LN_RX0 0x200 +#define SSPXTP_SIFSLV_DIG_LN_DAIF 0x300 +#define SSPXTP_SIFSLV_PHYA_LN 0x400 + +#define XSP_U2FREQ_FMCR0 ((SSUSB_SIFSLV_U2FREQ) + 0x00) +#define P2F_RG_FREQDET_EN BIT(24) +#define P2F_RG_CYCLECNT GENMASK(23, 0) +#define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x)) + +#define XSP_U2FREQ_MMONR0 ((SSUSB_SIFSLV_U2FREQ) + 0x0c) + +#define XSP_U2FREQ_FMMONR1 ((SSUSB_SIFSLV_U2FREQ) + 0x10) +#define P2F_RG_FRCK_EN BIT(8) +#define P2F_USB_FM_VALID BIT(0) + +#define XSP_USBPHYACR0 ((SSUSB_SIFSLV_U2PHY_COM) + 0x00) +#define P2A0_RG_INTR_EN BIT(5) + +#define XSP_USBPHYACR1 ((SSUSB_SIFSLV_U2PHY_COM) + 0x04) +#define P2A1_RG_INTR_CAL GENMASK(23, 19) +#define P2A1_RG_INTR_CAL_VAL(x) ((0x1f & (x)) << 19) +#define P2A1_RG_VRT_SEL GENMASK(14, 12) +#define P2A1_RG_VRT_SEL_VAL(x) ((0x7 & (x)) << 12) +#define P2A1_RG_TERM_SEL GENMASK(10, 8) +#define P2A1_RG_TERM_SEL_VAL(x) ((0x7 & (x)) << 8) + +#define XSP_USBPHYACR5 ((SSUSB_SIFSLV_U2PHY_COM) + 0x014) +#define P2A5_RG_HSTX_SRCAL_EN BIT(15) +#define P2A5_RG_HSTX_SRCTRL GENMASK(14, 12) +#define P2A5_RG_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12) + +#define XSP_USBPHYACR6 ((SSUSB_SIFSLV_U2PHY_COM) + 0x018) +#define P2A6_RG_BC11_SW_EN BIT(23) +#define P2A6_RG_OTG_VBUSCMP_EN BIT(20) + +#define XSP_U2PHYDTM1 ((SSUSB_SIFSLV_U2PHY_COM) + 0x06C) +#define P2D_FORCE_IDDIG BIT(9) +#define P2D_RG_VBUSVALID BIT(5) +#define P2D_RG_SESSEND BIT(4) +#define P2D_RG_AVALID BIT(2) +#define P2D_RG_IDDIG BIT(1) + +#define SSPXTP_PHYA_GLB_00 ((SSPXTP_SIFSLV_PHYA_GLB) + 0x00) +#define RG_XTP_GLB_BIAS_INTR_CTRL GENMASK(21, 16) +#define RG_XTP_GLB_BIAS_INTR_CTRL_VAL(x) ((0x3f & (x)) << 16) + +#define SSPXTP_PHYA_LN_04 ((SSPXTP_SIFSLV_PHYA_LN) + 0x04) +#define RG_XTP_LN0_TX_IMPSEL GENMASK(4, 0) +#define RG_XTP_LN0_TX_IMPSEL_VAL(x) (0x1f & (x)) + +#define SSPXTP_PHYA_LN_14 ((SSPXTP_SIFSLV_PHYA_LN) + 0x014) +#define RG_XTP_LN0_RX_IMPSEL GENMASK(4, 0) +#define RG_XTP_LN0_RX_IMPSEL_VAL(x) (0x1f & (x)) + +#define XSP_REF_CLK 26 /* MHZ */ +#define XSP_SLEW_RATE_COEF 17 +#define XSP_SR_COEF_DIVISOR 1000 +#define XSP_FM_DET_CYCLE_CNT 1024 + +struct xsphy_instance { + struct phy *phy; + void __iomem *port_base; + struct clk *ref_clk; /* reference clock of anolog phy */ + u32 index; + u32 type; + /* only for HQA test */ + int efuse_intr; + int efuse_tx_imp; + int efuse_rx_imp; + /* u2 eye diagram */ + int eye_src; + int eye_vrt; + int eye_term; +}; + +struct mtk_xsphy { + struct device *dev; + void __iomem *glb_base; /* only shared u3 sif */ + struct xsphy_instance **phys; + int nphys; + int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */ + int src_coef; /* coefficient for slew rate calibrate */ +}; + +static void u2_phy_slew_rate_calibrate(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + void __iomem *pbase = inst->port_base; + int calib_val; + int fm_out; + u32 tmp; + + /* use force value */ + if (inst->eye_src) + return; + + /* enable USB ring oscillator */ + tmp = readl(pbase + XSP_USBPHYACR5); + tmp |= P2A5_RG_HSTX_SRCAL_EN; + writel(tmp, pbase + XSP_USBPHYACR5); + udelay(1); /* wait clock stable */ + + /* enable free run clock */ + tmp = readl(pbase + XSP_U2FREQ_FMMONR1); + tmp |= P2F_RG_FRCK_EN; + writel(tmp, pbase + XSP_U2FREQ_FMMONR1); + + /* set cycle count as 1024 */ + tmp = readl(pbase + XSP_U2FREQ_FMCR0); + tmp &= ~(P2F_RG_CYCLECNT); + tmp |= P2F_RG_CYCLECNT_VAL(XSP_FM_DET_CYCLE_CNT); + writel(tmp, pbase + XSP_U2FREQ_FMCR0); + + /* enable frequency meter */ + tmp = readl(pbase + XSP_U2FREQ_FMCR0); + tmp |= P2F_RG_FREQDET_EN; + writel(tmp, pbase + XSP_U2FREQ_FMCR0); + + /* ignore return value */ + readl_poll_timeout(pbase + XSP_U2FREQ_FMMONR1, tmp, + (tmp & P2F_USB_FM_VALID), 10, 200); + + fm_out = readl(pbase + XSP_U2FREQ_MMONR0); + + /* disable frequency meter */ + tmp = readl(pbase + XSP_U2FREQ_FMCR0); + tmp &= ~P2F_RG_FREQDET_EN; + writel(tmp, pbase + XSP_U2FREQ_FMCR0); + + /* disable free run clock */ + tmp = readl(pbase + XSP_U2FREQ_FMMONR1); + tmp &= ~P2F_RG_FRCK_EN; + writel(tmp, pbase + XSP_U2FREQ_FMMONR1); + + if (fm_out) { + /* (1024 / FM_OUT) x reference clock frequency x coefficient */ + tmp = xsphy->src_ref_clk * xsphy->src_coef; + tmp = (tmp * XSP_FM_DET_CYCLE_CNT) / fm_out; + calib_val = DIV_ROUND_CLOSEST(tmp, XSP_SR_COEF_DIVISOR); + } else { + /* if FM detection fail, set default value */ + calib_val = 3; + } + dev_dbg(xsphy->dev, "phy.%d, fm_out:%d, calib:%d (clk:%d, coef:%d)\n", + inst->index, fm_out, calib_val, + xsphy->src_ref_clk, xsphy->src_coef); + + /* set HS slew rate */ + tmp = readl(pbase + XSP_USBPHYACR5); + tmp &= ~P2A5_RG_HSTX_SRCTRL; + tmp |= P2A5_RG_HSTX_SRCTRL_VAL(calib_val); + writel(tmp, pbase + XSP_USBPHYACR5); + + /* disable USB ring oscillator */ + tmp = readl(pbase + XSP_USBPHYACR5); + tmp &= ~P2A5_RG_HSTX_SRCAL_EN; + writel(tmp, pbase + XSP_USBPHYACR5); +} + +static void u2_phy_instance_init(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + void __iomem *pbase = inst->port_base; + u32 tmp; + + /* DP/DM BC1.1 path Disable */ + tmp = readl(pbase + XSP_USBPHYACR6); + tmp &= ~P2A6_RG_BC11_SW_EN; + writel(tmp, pbase + XSP_USBPHYACR6); + + tmp = readl(pbase + XSP_USBPHYACR0); + tmp |= P2A0_RG_INTR_EN; + writel(tmp, pbase + XSP_USBPHYACR0); +} + +static void u2_phy_instance_power_on(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + void __iomem *pbase = inst->port_base; + u32 index = inst->index; + u32 tmp; + + tmp = readl(pbase + XSP_USBPHYACR6); + tmp |= P2A6_RG_OTG_VBUSCMP_EN; + writel(tmp, pbase + XSP_USBPHYACR6); + + tmp = readl(pbase + XSP_U2PHYDTM1); + tmp |= P2D_RG_VBUSVALID | P2D_RG_AVALID; + tmp &= ~P2D_RG_SESSEND; + writel(tmp, pbase + XSP_U2PHYDTM1); + + dev_dbg(xsphy->dev, "%s(%d)\n", __func__, index); +} + +static void u2_phy_instance_power_off(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + void __iomem *pbase = inst->port_base; + u32 index = inst->index; + u32 tmp; + + tmp = readl(pbase + XSP_USBPHYACR6); + tmp &= ~P2A6_RG_OTG_VBUSCMP_EN; + writel(tmp, pbase + XSP_USBPHYACR6); + + tmp = readl(pbase + XSP_U2PHYDTM1); + tmp &= ~(P2D_RG_VBUSVALID | P2D_RG_AVALID); + tmp |= P2D_RG_SESSEND; + writel(tmp, pbase + XSP_U2PHYDTM1); + + dev_dbg(xsphy->dev, "%s(%d)\n", __func__, index); +} + +static void u2_phy_instance_set_mode(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst, + enum phy_mode mode) +{ + u32 tmp; + + tmp = readl(inst->port_base + XSP_U2PHYDTM1); + switch (mode) { + case PHY_MODE_USB_DEVICE: + tmp |= P2D_FORCE_IDDIG | P2D_RG_IDDIG; + break; + case PHY_MODE_USB_HOST: + tmp |= P2D_FORCE_IDDIG; + tmp &= ~P2D_RG_IDDIG; + break; + case PHY_MODE_USB_OTG: + tmp &= ~(P2D_FORCE_IDDIG | P2D_RG_IDDIG); + break; + default: + return; + } + writel(tmp, inst->port_base + XSP_U2PHYDTM1); +} + +static void phy_parse_property(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + struct device *dev = &inst->phy->dev; + + switch (inst->type) { + case PHY_TYPE_USB2: + device_property_read_u32(dev, "mediatek,efuse-intr", + &inst->efuse_intr); + device_property_read_u32(dev, "mediatek,eye-src", + &inst->eye_src); + device_property_read_u32(dev, "mediatek,eye-vrt", + &inst->eye_vrt); + device_property_read_u32(dev, "mediatek,eye-term", + &inst->eye_term); + dev_dbg(dev, "intr:%d, src:%d, vrt:%d, term:%d\n", + inst->efuse_intr, inst->eye_src, + inst->eye_vrt, inst->eye_term); + break; + case PHY_TYPE_USB3: + device_property_read_u32(dev, "mediatek,efuse-intr", + &inst->efuse_intr); + device_property_read_u32(dev, "mediatek,efuse-tx-imp", + &inst->efuse_tx_imp); + device_property_read_u32(dev, "mediatek,efuse-rx-imp", + &inst->efuse_rx_imp); + dev_dbg(dev, "intr:%d, tx-imp:%d, rx-imp:%d\n", + inst->efuse_intr, inst->efuse_tx_imp, + inst->efuse_rx_imp); + break; + default: + dev_err(xsphy->dev, "incompatible phy type\n"); + return; + } +} + +static void u2_phy_props_set(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + void __iomem *pbase = inst->port_base; + u32 tmp; + + if (inst->efuse_intr) { + tmp = readl(pbase + XSP_USBPHYACR1); + tmp &= ~P2A1_RG_INTR_CAL; + tmp |= P2A1_RG_INTR_CAL_VAL(inst->efuse_intr); + writel(tmp, pbase + XSP_USBPHYACR1); + } + + if (inst->eye_src) { + tmp = readl(pbase + XSP_USBPHYACR5); + tmp &= ~P2A5_RG_HSTX_SRCTRL; + tmp |= P2A5_RG_HSTX_SRCTRL_VAL(inst->eye_src); + writel(tmp, pbase + XSP_USBPHYACR5); + } + + if (inst->eye_vrt) { + tmp = readl(pbase + XSP_USBPHYACR1); + tmp &= ~P2A1_RG_VRT_SEL; + tmp |= P2A1_RG_VRT_SEL_VAL(inst->eye_vrt); + writel(tmp, pbase + XSP_USBPHYACR1); + } + + if (inst->eye_term) { + tmp = readl(pbase + XSP_USBPHYACR1); + tmp &= ~P2A1_RG_TERM_SEL; + tmp |= P2A1_RG_TERM_SEL_VAL(inst->eye_term); + writel(tmp, pbase + XSP_USBPHYACR1); + } +} + +static void u3_phy_props_set(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + void __iomem *pbase = inst->port_base; + u32 tmp; + + if (inst->efuse_intr) { + tmp = readl(xsphy->glb_base + SSPXTP_PHYA_GLB_00); + tmp &= ~RG_XTP_GLB_BIAS_INTR_CTRL; + tmp |= RG_XTP_GLB_BIAS_INTR_CTRL_VAL(inst->efuse_intr); + writel(tmp, xsphy->glb_base + SSPXTP_PHYA_GLB_00); + } + + if (inst->efuse_tx_imp) { + tmp = readl(pbase + SSPXTP_PHYA_LN_04); + tmp &= ~RG_XTP_LN0_TX_IMPSEL; + tmp |= RG_XTP_LN0_TX_IMPSEL_VAL(inst->efuse_tx_imp); + writel(tmp, pbase + SSPXTP_PHYA_LN_04); + } + + if (inst->efuse_rx_imp) { + tmp = readl(pbase + SSPXTP_PHYA_LN_14); + tmp &= ~RG_XTP_LN0_RX_IMPSEL; + tmp |= RG_XTP_LN0_RX_IMPSEL_VAL(inst->efuse_rx_imp); + writel(tmp, pbase + SSPXTP_PHYA_LN_14); + } +} + +static int mtk_phy_init(struct phy *phy) +{ + struct xsphy_instance *inst = phy_get_drvdata(phy); + struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); + int ret; + + ret = clk_prepare_enable(inst->ref_clk); + if (ret) { + dev_err(xsphy->dev, "failed to enable ref_clk\n"); + return ret; + } + + switch (inst->type) { + case PHY_TYPE_USB2: + u2_phy_instance_init(xsphy, inst); + u2_phy_props_set(xsphy, inst); + break; + case PHY_TYPE_USB3: + u3_phy_props_set(xsphy, inst); + break; + default: + dev_err(xsphy->dev, "incompatible phy type\n"); + clk_disable_unprepare(inst->ref_clk); + return -EINVAL; + } + + return 0; +} + +static int mtk_phy_power_on(struct phy *phy) +{ + struct xsphy_instance *inst = phy_get_drvdata(phy); + struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); + + if (inst->type == PHY_TYPE_USB2) { + u2_phy_instance_power_on(xsphy, inst); + u2_phy_slew_rate_calibrate(xsphy, inst); + } + + return 0; +} + +static int mtk_phy_power_off(struct phy *phy) +{ + struct xsphy_instance *inst = phy_get_drvdata(phy); + struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); + + if (inst->type == PHY_TYPE_USB2) + u2_phy_instance_power_off(xsphy, inst); + + return 0; +} + +static int mtk_phy_exit(struct phy *phy) +{ + struct xsphy_instance *inst = phy_get_drvdata(phy); + + clk_disable_unprepare(inst->ref_clk); + return 0; +} + +static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode) +{ + struct xsphy_instance *inst = phy_get_drvdata(phy); + struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); + + if (inst->type == PHY_TYPE_USB2) + u2_phy_instance_set_mode(xsphy, inst, mode); + + return 0; +} + +static struct phy *mtk_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct mtk_xsphy *xsphy = dev_get_drvdata(dev); + struct xsphy_instance *inst = NULL; + struct device_node *phy_np = args->np; + int index; + + if (args->args_count != 1) { + dev_err(dev, "invalid number of cells in 'phy' property\n"); + return ERR_PTR(-EINVAL); + } + + for (index = 0; index < xsphy->nphys; index++) + if (phy_np == xsphy->phys[index]->phy->dev.of_node) { + inst = xsphy->phys[index]; + break; + } + + if (!inst) { + dev_err(dev, "failed to find appropriate phy\n"); + return ERR_PTR(-EINVAL); + } + + inst->type = args->args[0]; + if (!(inst->type == PHY_TYPE_USB2 || + inst->type == PHY_TYPE_USB3)) { + dev_err(dev, "unsupported phy type: %d\n", inst->type); + return ERR_PTR(-EINVAL); + } + + phy_parse_property(xsphy, inst); + + return inst->phy; +} + +static const struct phy_ops mtk_xsphy_ops = { + .init = mtk_phy_init, + .exit = mtk_phy_exit, + .power_on = mtk_phy_power_on, + .power_off = mtk_phy_power_off, + .set_mode = mtk_phy_set_mode, + .owner = THIS_MODULE, +}; + +static const struct of_device_id mtk_xsphy_id_table[] = { + { .compatible = "mediatek,xsphy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, mtk_xsphy_id_table); + +static int mtk_xsphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct phy_provider *provider; + struct resource *glb_res; + struct mtk_xsphy *xsphy; + struct resource res; + int port, retval; + + xsphy = devm_kzalloc(dev, sizeof(*xsphy), GFP_KERNEL); + if (!xsphy) + return -ENOMEM; + + xsphy->nphys = of_get_child_count(np); + xsphy->phys = devm_kcalloc(dev, xsphy->nphys, + sizeof(*xsphy->phys), GFP_KERNEL); + if (!xsphy->phys) + return -ENOMEM; + + xsphy->dev = dev; + platform_set_drvdata(pdev, xsphy); + + glb_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + /* optional, may not exist if no u3 phys */ + if (glb_res) { + /* get banks shared by multiple u3 phys */ + xsphy->glb_base = devm_ioremap_resource(dev, glb_res); + if (IS_ERR(xsphy->glb_base)) { + dev_err(dev, "failed to remap glb regs\n"); + return PTR_ERR(xsphy->glb_base); + } + } + + xsphy->src_ref_clk = XSP_REF_CLK; + xsphy->src_coef = XSP_SLEW_RATE_COEF; + /* update parameters of slew rate calibrate if exist */ + device_property_read_u32(dev, "mediatek,src-ref-clk-mhz", + &xsphy->src_ref_clk); + device_property_read_u32(dev, "mediatek,src-coef", &xsphy->src_coef); + + port = 0; + for_each_child_of_node(np, child_np) { + struct xsphy_instance *inst; + struct phy *phy; + + inst = devm_kzalloc(dev, sizeof(*inst), GFP_KERNEL); + if (!inst) { + retval = -ENOMEM; + goto put_child; + } + + xsphy->phys[port] = inst; + + phy = devm_phy_create(dev, child_np, &mtk_xsphy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + retval = PTR_ERR(phy); + goto put_child; + } + + retval = of_address_to_resource(child_np, 0, &res); + if (retval) { + dev_err(dev, "failed to get address resource(id-%d)\n", + port); + goto put_child; + } + + inst->port_base = devm_ioremap_resource(&phy->dev, &res); + if (IS_ERR(inst->port_base)) { + dev_err(dev, "failed to remap phy regs\n"); + retval = PTR_ERR(inst->port_base); + goto put_child; + } + + inst->phy = phy; + inst->index = port; + phy_set_drvdata(phy, inst); + port++; + + inst->ref_clk = devm_clk_get(&phy->dev, "ref"); + if (IS_ERR(inst->ref_clk)) { + dev_err(dev, "failed to get ref_clk(id-%d)\n", port); + retval = PTR_ERR(inst->ref_clk); + goto put_child; + } + } + + provider = devm_of_phy_provider_register(dev, mtk_phy_xlate); + return PTR_ERR_OR_ZERO(provider); + +put_child: + of_node_put(child_np); + return retval; +} + +static struct platform_driver mtk_xsphy_driver = { + .probe = mtk_xsphy_probe, + .driver = { + .name = "mtk-xsphy", + .of_match_table = mtk_xsphy_id_table, + }, +}; + +module_platform_driver(mtk_xsphy_driver); + +MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); +MODULE_DESCRIPTION("MediaTek USB XS-PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c index 5439dd90d0dd..23705e1a0023 100644 --- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -19,6 +19,8 @@ #define PHY_MDM6600_PHY_DELAY_MS 4000 /* PHY enable 2.2s to 3.5s */ #define PHY_MDM6600_ENABLED_DELAY_MS 8000 /* 8s more total for MDM6600 */ +#define MDM6600_MODEM_IDLE_DELAY_MS 1000 /* modem after USB suspend */ +#define MDM6600_MODEM_WAKE_DELAY_MS 200 /* modem response after idle */ enum phy_mdm6600_ctrl_lines { PHY_MDM6600_ENABLE, /* USB PHY enable */ @@ -93,9 +95,11 @@ struct phy_mdm6600 { struct gpio_descs *cmd_gpios; struct delayed_work bootup_work; struct delayed_work status_work; + struct delayed_work modem_wake_work; struct completion ack; bool enabled; /* mdm6600 phy enabled */ bool running; /* mdm6600 boot done */ + bool awake; /* mdm6600 respnds on n_gsm */ int status; }; @@ -446,6 +450,62 @@ static void phy_mdm6600_deferred_power_on(struct work_struct *work) dev_err(ddata->dev, "Device not functional\n"); } +/* + * USB suspend puts mdm6600 into low power mode. For any n_gsm using apps, + * we need to keep the modem awake by kicking it's mode0 GPIO. This will + * keep the modem awake for about 1.2 seconds. When no n_gsm apps are using + * the modem, runtime PM auto mode can be enabled so modem can enter low + * power mode. + */ +static void phy_mdm6600_wake_modem(struct phy_mdm6600 *ddata) +{ + struct gpio_desc *mode_gpio0; + + mode_gpio0 = ddata->mode_gpios->desc[PHY_MDM6600_MODE0]; + gpiod_set_value_cansleep(mode_gpio0, 1); + usleep_range(5, 15); + gpiod_set_value_cansleep(mode_gpio0, 0); + if (ddata->awake) + usleep_range(5, 15); + else + msleep(MDM6600_MODEM_WAKE_DELAY_MS); +} + +static void phy_mdm6600_modem_wake(struct work_struct *work) +{ + struct phy_mdm6600 *ddata; + + ddata = container_of(work, struct phy_mdm6600, modem_wake_work.work); + phy_mdm6600_wake_modem(ddata); + schedule_delayed_work(&ddata->modem_wake_work, + msecs_to_jiffies(MDM6600_MODEM_IDLE_DELAY_MS)); +} + +static int __maybe_unused phy_mdm6600_runtime_suspend(struct device *dev) +{ + struct phy_mdm6600 *ddata = dev_get_drvdata(dev); + + cancel_delayed_work_sync(&ddata->modem_wake_work); + ddata->awake = false; + + return 0; +} + +static int __maybe_unused phy_mdm6600_runtime_resume(struct device *dev) +{ + struct phy_mdm6600 *ddata = dev_get_drvdata(dev); + + phy_mdm6600_modem_wake(&ddata->modem_wake_work.work); + ddata->awake = true; + + return 0; +} + +static const struct dev_pm_ops phy_mdm6600_pm_ops = { + SET_RUNTIME_PM_OPS(phy_mdm6600_runtime_suspend, + phy_mdm6600_runtime_resume, NULL) +}; + static const struct of_device_id phy_mdm6600_id_table[] = { { .compatible = "motorola,mapphone-mdm6600", }, {}, @@ -464,6 +524,7 @@ static int phy_mdm6600_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&ddata->bootup_work, phy_mdm6600_deferred_power_on); INIT_DELAYED_WORK(&ddata->status_work, phy_mdm6600_status); + INIT_DELAYED_WORK(&ddata->modem_wake_work, phy_mdm6600_modem_wake); init_completion(&ddata->ack); ddata->dev = &pdev->dev; @@ -500,6 +561,24 @@ static int phy_mdm6600_probe(struct platform_device *pdev) */ msleep(PHY_MDM6600_PHY_DELAY_MS + 500); + /* + * Enable PM runtime only after PHY has been powered up properly. + * It is currently only needed after USB suspends mdm6600 and n_gsm + * needs to access the device. We don't want to do this earlier as + * gpio mode0 pin doubles as mdm6600 wake-up gpio. + */ + pm_runtime_use_autosuspend(ddata->dev); + pm_runtime_set_autosuspend_delay(ddata->dev, + MDM6600_MODEM_IDLE_DELAY_MS); + pm_runtime_enable(ddata->dev); + error = pm_runtime_get_sync(ddata->dev); + if (error < 0) { + dev_warn(ddata->dev, "failed to wake modem: %i\n", error); + pm_runtime_put_noidle(ddata->dev); + } + pm_runtime_mark_last_busy(ddata->dev); + pm_runtime_put_autosuspend(ddata->dev); + return 0; cleanup: @@ -512,6 +591,10 @@ static int phy_mdm6600_remove(struct platform_device *pdev) struct phy_mdm6600 *ddata = platform_get_drvdata(pdev); struct gpio_desc *reset_gpio = ddata->ctrl_gpios[PHY_MDM6600_RESET]; + pm_runtime_dont_use_autosuspend(ddata->dev); + pm_runtime_put_sync(ddata->dev); + pm_runtime_disable(ddata->dev); + if (!ddata->running) wait_for_completion_timeout(&ddata->ack, msecs_to_jiffies(PHY_MDM6600_ENABLED_DELAY_MS)); @@ -519,6 +602,7 @@ static int phy_mdm6600_remove(struct platform_device *pdev) gpiod_set_value_cansleep(reset_gpio, 1); phy_mdm6600_device_power_off(ddata); + cancel_delayed_work_sync(&ddata->modem_wake_work); cancel_delayed_work_sync(&ddata->bootup_work); cancel_delayed_work_sync(&ddata->status_work); @@ -530,6 +614,7 @@ static struct platform_driver phy_mdm6600_driver = { .remove = phy_mdm6600_remove, .driver = { .name = "phy-mapphone-mdm6600", + .pm = &phy_mdm6600_pm_ops, .of_match_table = of_match_ptr(phy_mdm6600_id_table), }, }; diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index 09ac8afb97ac..35fd38c5a4a1 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -153,6 +153,9 @@ int phy_pm_runtime_get(struct phy *phy) { int ret; + if (!phy) + return 0; + if (!pm_runtime_enabled(&phy->dev)) return -ENOTSUPP; @@ -168,6 +171,9 @@ int phy_pm_runtime_get_sync(struct phy *phy) { int ret; + if (!phy) + return 0; + if (!pm_runtime_enabled(&phy->dev)) return -ENOTSUPP; @@ -181,6 +187,9 @@ EXPORT_SYMBOL_GPL(phy_pm_runtime_get_sync); int phy_pm_runtime_put(struct phy *phy) { + if (!phy) + return 0; + if (!pm_runtime_enabled(&phy->dev)) return -ENOTSUPP; @@ -190,6 +199,9 @@ EXPORT_SYMBOL_GPL(phy_pm_runtime_put); int phy_pm_runtime_put_sync(struct phy *phy) { + if (!phy) + return 0; + if (!pm_runtime_enabled(&phy->dev)) return -ENOTSUPP; @@ -199,6 +211,9 @@ EXPORT_SYMBOL_GPL(phy_pm_runtime_put_sync); void phy_pm_runtime_allow(struct phy *phy) { + if (!phy) + return; + if (!pm_runtime_enabled(&phy->dev)) return; @@ -208,6 +223,9 @@ EXPORT_SYMBOL_GPL(phy_pm_runtime_allow); void phy_pm_runtime_forbid(struct phy *phy) { + if (!phy) + return; + if (!pm_runtime_enabled(&phy->dev)) return; diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index 7bfa64baf837..632a0e73ee10 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -1,6 +1,15 @@ # -# Phy drivers for Qualcomm platforms +# Phy drivers for Qualcomm and Atheros platforms # +config PHY_ATH79_USB + tristate "Atheros AR71XX/9XXX USB PHY driver" + depends on OF && (ATH79 || COMPILE_TEST) + default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM + select RESET_CONTROLLER + select GENERIC_PHY + help + Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs. + config PHY_QCOM_APQ8064_SATA tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" depends on ARCH_QCOM diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 9abb7899762a..deb831f453ae 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o diff --git a/drivers/phy/qualcomm/phy-ath79-usb.c b/drivers/phy/qualcomm/phy-ath79-usb.c new file mode 100644 index 000000000000..6fd6e07ab345 --- /dev/null +++ b/drivers/phy/qualcomm/phy-ath79-usb.c @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Atheros AR71XX/9XXX USB PHY driver + * + * Copyright (C) 2015-2018 Alban Bedel <albeu@free.fr> + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/reset.h> + +struct ath79_usb_phy { + struct reset_control *reset; + /* The suspend override logic is inverted, hence the no prefix + * to make the code a bit easier to understand. + */ + struct reset_control *no_suspend_override; +}; + +static int ath79_usb_phy_power_on(struct phy *phy) +{ + struct ath79_usb_phy *priv = phy_get_drvdata(phy); + int err = 0; + + if (priv->no_suspend_override) { + err = reset_control_assert(priv->no_suspend_override); + if (err) + return err; + } + + err = reset_control_deassert(priv->reset); + if (err && priv->no_suspend_override) + reset_control_assert(priv->no_suspend_override); + + return err; +} + +static int ath79_usb_phy_power_off(struct phy *phy) +{ + struct ath79_usb_phy *priv = phy_get_drvdata(phy); + int err = 0; + + err = reset_control_assert(priv->reset); + if (err) + return err; + + if (priv->no_suspend_override) { + err = reset_control_deassert(priv->no_suspend_override); + if (err) + reset_control_deassert(priv->reset); + } + + return err; +} + +static const struct phy_ops ath79_usb_phy_ops = { + .power_on = ath79_usb_phy_power_on, + .power_off = ath79_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static int ath79_usb_phy_probe(struct platform_device *pdev) +{ + struct ath79_usb_phy *priv; + struct phy *phy; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->reset = devm_reset_control_get(&pdev->dev, "usb-phy"); + if (IS_ERR(priv->reset)) + return PTR_ERR(priv->reset); + + priv->no_suspend_override = devm_reset_control_get_optional( + &pdev->dev, "usb-suspend-override"); + if (IS_ERR(priv->no_suspend_override)) + return PTR_ERR(priv->no_suspend_override); + + phy = devm_phy_create(&pdev->dev, NULL, &ath79_usb_phy_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + phy_set_drvdata(phy, priv); + + return PTR_ERR_OR_ZERO(devm_of_phy_provider_register( + &pdev->dev, of_phy_simple_xlate)); +} + +static const struct of_device_id ath79_usb_phy_of_match[] = { + { .compatible = "qca,ar7100-usb-phy" }, + {} +}; +MODULE_DEVICE_TABLE(of, ath79_usb_phy_of_match); + +static struct platform_driver ath79_usb_phy_driver = { + .probe = ath79_usb_phy_probe, + .driver = { + .of_match_table = ath79_usb_phy_of_match, + .name = "ath79-usb-phy", + } +}; +module_platform_driver(ath79_usb_phy_driver); + +MODULE_DESCRIPTION("ATH79 USB PHY driver"); +MODULE_AUTHOR("Alban Bedel <albeu@free.fr>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 6470c5d61d1c..4c470104a0d6 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -490,6 +490,118 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13), }; +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x50), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = { + /* FLL settings */ + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02), + + /* Lock Det settings */ + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb5), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4c), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x64), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6a), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60), +}; + + /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { /* phy-type - PCIE/UFS/USB */ @@ -766,6 +878,7 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { .pwrdn_ctrl = SW_PWRDN, .mask_pcs_ready = PHYSTATUS, + .has_pwrdn_delay = true, .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, @@ -774,6 +887,35 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { .rx_b_lane_offset = 0x400, }; +static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { + .type = PHY_TYPE_USB3, + .nlanes = 1, + + .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl), + .tx_tbl = qmp_v3_usb3_uniphy_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_tx_tbl), + .rx_tbl = qmp_v3_usb3_uniphy_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_rx_tbl), + .pcs_tbl = qmp_v3_usb3_uniphy_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_pcs_tbl), + .clk_list = qmp_v3_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = msm8996_phy_vreg_l, + .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), + .regs = qmp_v3_usb3phy_regs_layout, + + .start_ctrl = SERDES_START | PCS_START, + .pwrdn_ctrl = SW_PWRDN, + .mask_pcs_ready = PHYSTATUS, + + .has_pwrdn_delay = true, + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, +}; + static void qcom_qmp_phy_configure(void __iomem *base, const unsigned int *regs, const struct qmp_phy_init_tbl tbl[], @@ -793,19 +935,6 @@ static void qcom_qmp_phy_configure(void __iomem *base, } } -static int qcom_qmp_phy_poweron(struct phy *phy) -{ - struct qmp_phy *qphy = phy_get_drvdata(phy); - struct qcom_qmp *qmp = qphy->qmp; - int ret; - - ret = clk_prepare_enable(qphy->pipe_clk); - if (ret) - dev_err(qmp->dev, "pipe_clk enable failed, err=%d\n", ret); - - return ret; -} - static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) { const struct qmp_phy_cfg *cfg = qmp->cfg; @@ -974,6 +1103,12 @@ static int qcom_qmp_phy_init(struct phy *phy) } } + ret = clk_prepare_enable(qphy->pipe_clk); + if (ret) { + dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret); + goto err_clk_enable; + } + /* Tx, Rx, and PCS configurations */ qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); /* Configuration for other LANE for USB-DP combo PHY */ @@ -1019,6 +1154,8 @@ static int qcom_qmp_phy_init(struct phy *phy) return ret; err_pcs_ready: + clk_disable_unprepare(qphy->pipe_clk); +err_clk_enable: if (cfg->has_lane_rst) reset_control_assert(qphy->lane_rst); err_lane_rst: @@ -1283,7 +1420,6 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np) static const struct phy_ops qcom_qmp_phy_gen_ops = { .init = qcom_qmp_phy_init, .exit = qcom_qmp_phy_exit, - .power_on = qcom_qmp_phy_poweron, .set_mode = qcom_qmp_phy_set_mode, .owner = THIS_MODULE, }; @@ -1381,8 +1517,11 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { .compatible = "qcom,ipq8074-qmp-pcie-phy", .data = &ipq8074_pciephy_cfg, }, { - .compatible = "qcom,qmp-v3-usb3-phy", + .compatible = "qcom,sdm845-qmp-usb3-phy", .data = &qmp_v3_usb3phy_cfg, + }, { + .compatible = "qcom,sdm845-qmp-usb3-uni-phy", + .data = &qmp_v3_usb3_uniphy_cfg, }, { }, }; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index d1c6905d0439..5d78d43ba9fc 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -214,6 +214,8 @@ #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030 #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034 #define QSERDES_V3_RX_RX_TERM_BW 0x07c +#define QSERDES_V3_RX_VGA_CAL_CNTRL1 0x0bc +#define QSERDES_V3_RX_VGA_CAL_CNTRL2 0x0c0 #define QSERDES_V3_RX_RX_EQ_GAIN2_LSB 0x0c8 #define QSERDES_V3_RX_RX_EQ_GAIN2_MSB 0x0cc #define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d4 @@ -227,6 +229,7 @@ #define QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL 0x10c #define QSERDES_V3_RX_RX_BAND 0x110 #define QSERDES_V3_RX_RX_INTERFACE_MODE 0x11c +#define QSERDES_V3_RX_RX_MODE_00 0x164 /* Only for QMP V3 PHY - PCS registers */ #define QPHY_V3_PCS_POWER_DOWN_CONTROL 0x004 @@ -273,6 +276,8 @@ #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL 0x0d0 #define QPHY_V3_PCS_FLL_MAN_CODE 0x0d4 #define QPHY_V3_PCS_RX_SIGDET_LVL 0x1d8 +#define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c +#define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210 /* Only for QMP V3 PHY - PCS_MISC registers */ #define QPHY_V3_PCS_MISC_CLAMP_ENABLE 0x0c diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c index 94afeac1a19e..e70e425f26f5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -20,6 +20,8 @@ #include <linux/reset.h> #include <linux/slab.h> +#include <dt-bindings/phy/phy-qcom-qusb2.h> + #define QUSB2PHY_PLL_TEST 0x04 #define CLK_REF_SEL BIT(7) @@ -60,6 +62,17 @@ #define CORE_RESET BIT(5) #define CORE_RESET_MUX BIT(6) +/* QUSB2PHY_IMP_CTRL1 register bits */ +#define IMP_RES_OFFSET_MASK GENMASK(5, 0) +#define IMP_RES_OFFSET_SHIFT 0x0 + +/* QUSB2PHY_PORT_TUNE1 register bits */ +#define HSTX_TRIM_MASK GENMASK(7, 4) +#define HSTX_TRIM_SHIFT 0x4 +#define PREEMPH_WIDTH_HALF_BIT BIT(2) +#define PREEMPHASIS_EN_MASK GENMASK(1, 0) +#define PREEMPHASIS_EN_SHIFT 0x0 + #define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04 #define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c #define QUSB2PHY_PLL_CMODE 0x2c @@ -139,7 +152,7 @@ static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = { QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), }; -static const unsigned int qusb2_v2_regs_layout[] = { +static const unsigned int sdm845_regs_layout[] = { [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8, [QUSB2PHY_PLL_STATUS] = 0x1a0, [QUSB2PHY_PORT_TUNE1] = 0x240, @@ -153,7 +166,7 @@ static const unsigned int qusb2_v2_regs_layout[] = { [QUSB2PHY_INTR_CTRL] = 0x230, }; -static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = { +static const struct qusb2_phy_init_tbl sdm845_init_tbl[] = { QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03), QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c), QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80), @@ -208,10 +221,10 @@ static const struct qusb2_phy_cfg msm8996_phy_cfg = { .autoresume_en = BIT(3), }; -static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = { - .tbl = qusb2_v2_init_tbl, - .tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl), - .regs = qusb2_v2_regs_layout, +static const struct qusb2_phy_cfg sdm845_phy_cfg = { + .tbl = sdm845_init_tbl, + .tbl_num = ARRAY_SIZE(sdm845_init_tbl), + .regs = sdm845_regs_layout, .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN | POWER_DOWN), @@ -241,6 +254,15 @@ static const char * const qusb2_phy_vreg_names[] = { * @tcsr: TCSR syscon register map * @cell: nvmem cell containing phy tuning value * + * @override_imp_res_offset: PHY should use different rescode offset + * @imp_res_offset_value: rescode offset to be updated in IMP_CTRL1 register + * @override_hstx_trim: PHY should use different HSTX o/p current value + * @hstx_trim_value: HSTX_TRIM value to be updated in TUNE1 register + * @override_preemphasis: PHY should use different pre-amphasis amplitude + * @preemphasis_level: Amplitude Pre-Emphasis to be updated in TUNE1 register + * @override_preemphasis_width: PHY should use different pre-emphasis duration + * @preemphasis_width: half/full-width Pre-Emphasis updated via TUNE1 + * * @cfg: phy config data * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme * @phy_initialized: indicate if PHY has been initialized @@ -259,12 +281,35 @@ struct qusb2_phy { struct regmap *tcsr; struct nvmem_cell *cell; + bool override_imp_res_offset; + u8 imp_res_offset_value; + bool override_hstx_trim; + u8 hstx_trim_value; + bool override_preemphasis; + u8 preemphasis_level; + bool override_preemphasis_width; + u8 preemphasis_width; + const struct qusb2_phy_cfg *cfg; bool has_se_clk_scheme; bool phy_initialized; enum phy_mode mode; }; +static inline void qusb2_write_mask(void __iomem *base, u32 offset, + u32 val, u32 mask) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~mask; + reg |= val & mask; + writel(reg, base + offset); + + /* Ensure above write is completed */ + readl(base + offset); +} + static inline void qusb2_setbits(void __iomem *base, u32 offset, u32 val) { u32 reg; @@ -305,6 +350,42 @@ void qcom_qusb2_phy_configure(void __iomem *base, } /* + * Update board specific PHY tuning override values if specified from + * device tree. + */ +static void qusb2_phy_override_phy_params(struct qusb2_phy *qphy) +{ + const struct qusb2_phy_cfg *cfg = qphy->cfg; + + if (qphy->override_imp_res_offset) + qusb2_write_mask(qphy->base, QUSB2PHY_IMP_CTRL1, + qphy->imp_res_offset_value << IMP_RES_OFFSET_SHIFT, + IMP_RES_OFFSET_MASK); + + if (qphy->override_hstx_trim) + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1], + qphy->hstx_trim_value << HSTX_TRIM_SHIFT, + HSTX_TRIM_MASK); + + if (qphy->override_preemphasis) + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1], + qphy->preemphasis_level << PREEMPHASIS_EN_SHIFT, + PREEMPHASIS_EN_MASK); + + if (qphy->override_preemphasis_width) { + if (qphy->preemphasis_width == + QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT) + qusb2_setbits(qphy->base, + cfg->regs[QUSB2PHY_PORT_TUNE1], + PREEMPH_WIDTH_HALF_BIT); + else + qusb2_clrbits(qphy->base, + cfg->regs[QUSB2PHY_PORT_TUNE1], + PREEMPH_WIDTH_HALF_BIT); + } +} + +/* * Fetches HS Tx tuning value from nvmem and sets the * QUSB2PHY_PORT_TUNE1/2 register. * For error case, skip setting the value and use the default value. @@ -315,6 +396,10 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy) const struct qusb2_phy_cfg *cfg = qphy->cfg; u8 *val; + /* efuse register is optional */ + if (!qphy->cell) + return; + /* * Read efuse register having TUNE2/1 parameter's high nibble. * If efuse register shows value as 0x0, or if we fail to find @@ -521,6 +606,9 @@ static int qusb2_phy_init(struct phy *phy) qcom_qusb2_phy_configure(qphy->base, cfg->regs, cfg->tbl, cfg->tbl_num); + /* Override board specific PHY tuning values */ + qusb2_phy_override_phy_params(qphy); + /* Set efuse value for tuning the PHY */ qusb2_phy_set_tune2_param(qphy); @@ -643,8 +731,8 @@ static const struct of_device_id qusb2_phy_of_match_table[] = { .compatible = "qcom,msm8996-qusb2-phy", .data = &msm8996_phy_cfg, }, { - .compatible = "qcom,qusb2-v2-phy", - .data = &qusb2_v2_phy_cfg, + .compatible = "qcom,sdm845-qusb2-phy", + .data = &sdm845_phy_cfg, }, { }, }; @@ -664,6 +752,7 @@ static int qusb2_phy_probe(struct platform_device *pdev) struct resource *res; int ret, i; int num; + u32 value; qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL); if (!qphy) @@ -732,6 +821,31 @@ static int qusb2_phy_probe(struct platform_device *pdev) qphy->cell = NULL; dev_dbg(dev, "failed to lookup tune2 hstx trim value\n"); } + + if (!of_property_read_u32(dev->of_node, "qcom,imp-res-offset-value", + &value)) { + qphy->imp_res_offset_value = (u8)value; + qphy->override_imp_res_offset = true; + } + + if (!of_property_read_u32(dev->of_node, "qcom,hstx-trim-value", + &value)) { + qphy->hstx_trim_value = (u8)value; + qphy->override_hstx_trim = true; + } + + if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-level", + &value)) { + qphy->preemphasis_level = (u8)value; + qphy->override_preemphasis = true; + } + + if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-width", + &value)) { + qphy->preemphasis_width = (u8)value; + qphy->override_preemphasis_width = true; + } + pm_runtime_set_active(dev); pm_runtime_enable(dev); /* diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c index c198886f80a3..00d89599c67d 100644 --- a/drivers/phy/samsung/phy-exynos-mipi-video.c +++ b/drivers/phy/samsung/phy-exynos-mipi-video.c @@ -231,33 +231,27 @@ struct exynos_mipi_video_phy { static int __set_phy_state(const struct exynos_mipi_phy_desc *data, struct exynos_mipi_video_phy *state, unsigned int on) { - u32 val; + struct regmap *enable_map = state->regmaps[data->enable_map]; + struct regmap *resetn_map = state->regmaps[data->resetn_map]; spin_lock(&state->slock); /* disable in PMU sysreg */ if (!on && data->coupled_phy_id >= 0 && - state->phys[data->coupled_phy_id].phy->power_count == 0) { - regmap_read(state->regmaps[data->enable_map], data->enable_reg, - &val); - val &= ~data->enable_val; - regmap_write(state->regmaps[data->enable_map], data->enable_reg, - val); - } - + state->phys[data->coupled_phy_id].phy->power_count == 0) + regmap_update_bits(enable_map, data->enable_reg, + data->enable_val, 0); /* PHY reset */ - regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val); - val = on ? (val | data->resetn_val) : (val & ~data->resetn_val); - regmap_write(state->regmaps[data->resetn_map], data->resetn_reg, val); - + if (on) + regmap_update_bits(resetn_map, data->resetn_reg, + data->resetn_val, data->resetn_val); + else + regmap_update_bits(resetn_map, data->resetn_reg, + data->resetn_val, 0); /* enable in PMU sysreg */ - if (on) { - regmap_read(state->regmaps[data->enable_map], data->enable_reg, - &val); - val |= data->enable_val; - regmap_write(state->regmaps[data->enable_map], data->enable_reg, - val); - } + if (on) + regmap_update_bits(enable_map, data->enable_reg, + data->enable_val, data->enable_val); spin_unlock(&state->slock); diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index bc4e78a19c91..1255cd1d9a60 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -71,7 +71,6 @@ struct stm32_usbphyc { struct stm32_usbphyc_phy **phys; int nphys; int switch_setup; - bool pll_enabled; }; static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits) @@ -84,7 +83,8 @@ static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits) writel_relaxed(readl_relaxed(reg) & ~bits, reg); } -static void stm32_usbphyc_get_pll_params(u32 clk_rate, struct pll_params *pll_params) +static void stm32_usbphyc_get_pll_params(u32 clk_rate, + struct pll_params *pll_params) { unsigned long long fvco, ndiv, frac; @@ -271,7 +271,6 @@ static struct phy *stm32_usbphyc_of_xlate(struct device *dev, struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); struct stm32_usbphyc_phy *usbphyc_phy = NULL; struct device_node *phynode = args->np; - int port = 0; for (port = 0; port < usbphyc->nphys; port++) { @@ -367,8 +366,8 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) if (IS_ERR(phy)) { ret = PTR_ERR(phy); if (ret != -EPROBE_DEFER) - dev_err(dev, - "failed to create phy%d: %d\n", i, ret); + dev_err(dev, "failed to create phy%d: %d\n", + port, ret); goto put_child; } diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 11aa5902a9ac..de1b4ebe4de2 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -102,19 +102,6 @@ tegra_xusb_pad_find_phy_node(struct tegra_xusb_pad *pad, unsigned int index) return np; } -static int -tegra_xusb_lane_lookup_function(struct tegra_xusb_lane *lane, - const char *function) -{ - unsigned int i; - - for (i = 0; i < lane->soc->num_funcs; i++) - if (strcmp(function, lane->soc->funcs[i]) == 0) - return i; - - return -EINVAL; -} - int tegra_xusb_lane_parse_dt(struct tegra_xusb_lane *lane, struct device_node *np) { @@ -126,7 +113,7 @@ int tegra_xusb_lane_parse_dt(struct tegra_xusb_lane *lane, if (err < 0) return err; - err = tegra_xusb_lane_lookup_function(lane, function); + err = match_string(lane->soc->funcs, lane->soc->num_funcs, function); if (err < 0) { dev_err(dev, "invalid function \"%s\" for lane \"%s\"\n", function, np->name); diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 566644bb496a..f27cb186437d 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -866,6 +866,7 @@ config ACPI_CMPC config INTEL_CHT_INT33FE tristate "Intel Cherry Trail ACPI INT33FE Driver" depends on X86 && ACPI && I2C && REGULATOR + depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m) ---help--- This driver add support for the INT33FE ACPI device found on some Intel Cherry Trail devices. @@ -877,8 +878,7 @@ config INTEL_CHT_INT33FE i2c drivers for these chips can bind to the them. If you enable this driver it is advised to also select - CONFIG_TYPEC_FUSB302=m, CONFIG_CHARGER_BQ24190=m and - CONFIG_BATTERY_MAX17042=m. + CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m. config INTEL_INT0002_VGPIO tristate "Intel ACPI INT0002 Virtual GPIO driver" diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c index feac7b066e6c..f57ab0a27301 100644 --- a/drivers/power/supply/power_supply_core.c +++ b/drivers/power/supply/power_supply_core.c @@ -19,6 +19,7 @@ #include <linux/err.h> #include <linux/of.h> #include <linux/power_supply.h> +#include <linux/property.h> #include <linux/thermal.h> #include "power_supply.h" @@ -843,12 +844,21 @@ __power_supply_register(struct device *parent, { struct device *dev; struct power_supply *psy; - int rc; + int i, rc; if (!parent) pr_warn("%s: Expected proper parent device for '%s'\n", __func__, desc->name); + if (!desc || !desc->name || !desc->properties || !desc->num_properties) + return ERR_PTR(-EINVAL); + + for (i = 0; i < desc->num_properties; ++i) { + if ((desc->properties[i] == POWER_SUPPLY_PROP_USB_TYPE) && + (!desc->usb_types || !desc->num_usb_types)) + return ERR_PTR(-EINVAL); + } + psy = kzalloc(sizeof(*psy), GFP_KERNEL); if (!psy) return ERR_PTR(-ENOMEM); @@ -865,7 +875,8 @@ __power_supply_register(struct device *parent, psy->desc = desc; if (cfg) { psy->drv_data = cfg->drv_data; - psy->of_node = cfg->of_node; + psy->of_node = + cfg->fwnode ? to_of_node(cfg->fwnode) : cfg->of_node; psy->supplied_to = cfg->supplied_to; psy->num_supplicants = cfg->num_supplicants; } diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c index 5204f115970f..1350068c401a 100644 --- a/drivers/power/supply/power_supply_sysfs.c +++ b/drivers/power/supply/power_supply_sysfs.c @@ -46,6 +46,11 @@ static const char * const power_supply_type_text[] = { "USB_PD", "USB_PD_DRP", "BrickID" }; +static const char * const power_supply_usb_type_text[] = { + "Unknown", "SDP", "DCP", "CDP", "ACA", "C", + "PD", "PD_DRP", "PD_PPS", "BrickID" +}; + static const char * const power_supply_status_text[] = { "Unknown", "Charging", "Discharging", "Not charging", "Full" }; @@ -73,6 +78,41 @@ static const char * const power_supply_scope_text[] = { "Unknown", "System", "Device" }; +static ssize_t power_supply_show_usb_type(struct device *dev, + enum power_supply_usb_type *usb_types, + ssize_t num_usb_types, + union power_supply_propval *value, + char *buf) +{ + enum power_supply_usb_type usb_type; + ssize_t count = 0; + bool match = false; + int i; + + for (i = 0; i < num_usb_types; ++i) { + usb_type = usb_types[i]; + + if (value->intval == usb_type) { + count += sprintf(buf + count, "[%s] ", + power_supply_usb_type_text[usb_type]); + match = true; + } else { + count += sprintf(buf + count, "%s ", + power_supply_usb_type_text[usb_type]); + } + } + + if (!match) { + dev_warn(dev, "driver reporting unsupported connected type\n"); + return -EINVAL; + } + + if (count) + buf[count - 1] = '\n'; + + return count; +} + static ssize_t power_supply_show_property(struct device *dev, struct device_attribute *attr, char *buf) { @@ -115,6 +155,10 @@ static ssize_t power_supply_show_property(struct device *dev, else if (off == POWER_SUPPLY_PROP_TYPE) return sprintf(buf, "%s\n", power_supply_type_text[value.intval]); + else if (off == POWER_SUPPLY_PROP_USB_TYPE) + return power_supply_show_usb_type(dev, psy->desc->usb_types, + psy->desc->num_usb_types, + &value, buf); else if (off == POWER_SUPPLY_PROP_SCOPE) return sprintf(buf, "%s\n", power_supply_scope_text[value.intval]); @@ -241,6 +285,7 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(time_to_full_now), POWER_SUPPLY_ATTR(time_to_full_avg), POWER_SUPPLY_ATTR(type), + POWER_SUPPLY_ATTR(usb_type), POWER_SUPPLY_ATTR(scope), POWER_SUPPLY_ATTR(precharge_current), POWER_SUPPLY_ATTR(charge_term_current), diff --git a/drivers/staging/typec/Kconfig b/drivers/staging/typec/Kconfig index 5359f556d203..3aa981fbc8f5 100644 --- a/drivers/staging/typec/Kconfig +++ b/drivers/staging/typec/Kconfig @@ -9,6 +9,14 @@ config TYPEC_TCPCI help Type-C Port Controller driver for TCPCI-compliant controller. +config TYPEC_RT1711H + tristate "Richtek RT1711H Type-C chip driver" + select TYPEC_TCPCI + help + Richtek RT1711H Type-C chip driver that works with + Type-C Port Controller Manager to provide USB PD and USB + Type-C functionalities. + endif endmenu diff --git a/drivers/staging/typec/Makefile b/drivers/staging/typec/Makefile index 53d649abcb53..7803d485e1b3 100644 --- a/drivers/staging/typec/Makefile +++ b/drivers/staging/typec/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o +obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o diff --git a/drivers/staging/typec/tcpci.h b/drivers/staging/typec/tcpci.h index 34c865f0dcf6..303ebde26546 100644 --- a/drivers/staging/typec/tcpci.h +++ b/drivers/staging/typec/tcpci.h @@ -59,6 +59,7 @@ #define TCPC_POWER_CTRL_VCONN_ENABLE BIT(0) #define TCPC_CC_STATUS 0x1d +#define TCPC_CC_STATUS_TOGGLING BIT(5) #define TCPC_CC_STATUS_TERM BIT(4) #define TCPC_CC_STATUS_CC2_SHIFT 2 #define TCPC_CC_STATUS_CC2_MASK 0x3 diff --git a/drivers/staging/typec/tcpci_rt1711h.c b/drivers/staging/typec/tcpci_rt1711h.c new file mode 100644 index 000000000000..017389021b96 --- /dev/null +++ b/drivers/staging/typec/tcpci_rt1711h.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018, Richtek Technology Corporation + * + * Richtek RT1711H Type-C Chip Driver + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/gpio/consumer.h> +#include <linux/usb/tcpm.h> +#include <linux/regmap.h> +#include "tcpci.h" + +#define RT1711H_VID 0x29CF +#define RT1711H_PID 0x1711 + +#define RT1711H_RTCTRL8 0x9B + +/* Autoidle timeout = (tout * 2 + 1) * 6.4ms */ +#define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \ + (((ck300) << 7) | ((ship_off) << 5) | \ + ((auto_idle) << 3) | ((tout) & 0x07)) + +#define RT1711H_RTCTRL11 0x9E + +/* I2C timeout = (tout + 1) * 12.5ms */ +#define RT1711H_RTCTRL11_SET(en, tout) \ + (((en) << 7) | ((tout) & 0x0F)) + +#define RT1711H_RTCTRL13 0xA0 +#define RT1711H_RTCTRL14 0xA1 +#define RT1711H_RTCTRL15 0xA2 +#define RT1711H_RTCTRL16 0xA3 + +struct rt1711h_chip { + struct tcpci_data data; + struct tcpci *tcpci; + struct device *dev; +}; + +static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val) +{ + return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u16)); +} + +static int rt1711h_write16(struct rt1711h_chip *chip, unsigned int reg, u16 val) +{ + return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u16)); +} + +static int rt1711h_read8(struct rt1711h_chip *chip, unsigned int reg, u8 *val) +{ + return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u8)); +} + +static int rt1711h_write8(struct rt1711h_chip *chip, unsigned int reg, u8 val) +{ + return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u8)); +} + +static const struct regmap_config rt1711h_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = 0xFF, /* 0x80 .. 0xFF are vendor defined */ +}; + +static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata) +{ + return container_of(tdata, struct rt1711h_chip, data); +} + +static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata) +{ + int ret; + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + + /* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */ + ret = rt1711h_write8(chip, RT1711H_RTCTRL8, + RT1711H_RTCTRL8_SET(0, 1, 1, 2)); + if (ret < 0) + return ret; + + /* I2C reset : (val + 1) * 12.5ms */ + ret = rt1711h_write8(chip, RT1711H_RTCTRL11, + RT1711H_RTCTRL11_SET(1, 0x0F)); + if (ret < 0) + return ret; + + /* tTCPCfilter : (26.7 * val) us */ + ret = rt1711h_write8(chip, RT1711H_RTCTRL14, 0x0F); + if (ret < 0) + return ret; + + /* tDRP : (51.2 + 6.4 * val) ms */ + ret = rt1711h_write8(chip, RT1711H_RTCTRL15, 0x04); + if (ret < 0) + return ret; + + /* dcSRC.DRP : 33% */ + return rt1711h_write16(chip, RT1711H_RTCTRL16, 330); +} + +static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata, + bool enable) +{ + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + + return rt1711h_write8(chip, RT1711H_RTCTRL8, + RT1711H_RTCTRL8_SET(0, 1, !enable, 2)); +} + +static int rt1711h_start_drp_toggling(struct tcpci *tcpci, + struct tcpci_data *tdata, + enum typec_cc_status cc) +{ + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + int ret; + unsigned int reg = 0; + + switch (cc) { + default: + case TYPEC_CC_RP_DEF: + reg |= (TCPC_ROLE_CTRL_RP_VAL_DEF << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_1_5: + reg |= (TCPC_ROLE_CTRL_RP_VAL_1_5 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_3_0: + reg |= (TCPC_ROLE_CTRL_RP_VAL_3_0 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + } + + if (cc == TYPEC_CC_RD) + reg |= (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT); + else + reg |= (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT); + + ret = rt1711h_write8(chip, TCPC_ROLE_CTRL, reg); + if (ret < 0) + return ret; + usleep_range(500, 1000); + + return 0; +} + +static irqreturn_t rt1711h_irq(int irq, void *dev_id) +{ + int ret; + u16 alert; + u8 status; + struct rt1711h_chip *chip = dev_id; + + if (!chip->tcpci) + return IRQ_HANDLED; + + ret = rt1711h_read16(chip, TCPC_ALERT, &alert); + if (ret < 0) + goto out; + + if (alert & TCPC_ALERT_CC_STATUS) { + ret = rt1711h_read8(chip, TCPC_CC_STATUS, &status); + if (ret < 0) + goto out; + /* Clear cc change event triggered by starting toggling */ + if (status & TCPC_CC_STATUS_TOGGLING) + rt1711h_write8(chip, TCPC_ALERT, TCPC_ALERT_CC_STATUS); + } + +out: + return tcpci_irq(chip->tcpci); +} + +static int rt1711h_init_alert(struct rt1711h_chip *chip, + struct i2c_client *client) +{ + int ret; + + /* Disable chip interrupts before requesting irq */ + ret = rt1711h_write16(chip, TCPC_ALERT_MASK, 0); + if (ret < 0) + return ret; + + ret = devm_request_threaded_irq(chip->dev, client->irq, NULL, + rt1711h_irq, + IRQF_ONESHOT | IRQF_TRIGGER_LOW, + dev_name(chip->dev), chip); + if (ret < 0) + return ret; + enable_irq_wake(client->irq); + return 0; +} + +static int rt1711h_sw_reset(struct rt1711h_chip *chip) +{ + int ret; + + ret = rt1711h_write8(chip, RT1711H_RTCTRL13, 0x01); + if (ret < 0) + return ret; + + usleep_range(1000, 2000); + return 0; +} + +static int rt1711h_check_revision(struct i2c_client *i2c) +{ + int ret; + + ret = i2c_smbus_read_word_data(i2c, TCPC_VENDOR_ID); + if (ret < 0) + return ret; + if (ret != RT1711H_VID) { + dev_err(&i2c->dev, "vid is not correct, 0x%04x\n", ret); + return -ENODEV; + } + ret = i2c_smbus_read_word_data(i2c, TCPC_PRODUCT_ID); + if (ret < 0) + return ret; + if (ret != RT1711H_PID) { + dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret); + return -ENODEV; + } + return 0; +} + +static int rt1711h_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + int ret; + struct rt1711h_chip *chip; + + ret = rt1711h_check_revision(client); + if (ret < 0) { + dev_err(&client->dev, "check vid/pid fail\n"); + return ret; + } + + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->data.regmap = devm_regmap_init_i2c(client, + &rt1711h_regmap_config); + if (IS_ERR(chip->data.regmap)) + return PTR_ERR(chip->data.regmap); + + chip->dev = &client->dev; + i2c_set_clientdata(client, chip); + + ret = rt1711h_sw_reset(chip); + if (ret < 0) + return ret; + + ret = rt1711h_init_alert(chip, client); + if (ret < 0) + return ret; + + chip->data.init = rt1711h_init; + chip->data.set_vconn = rt1711h_set_vconn; + chip->data.start_drp_toggling = rt1711h_start_drp_toggling; + chip->tcpci = tcpci_register_port(chip->dev, &chip->data); + if (IS_ERR_OR_NULL(chip->tcpci)) + return PTR_ERR(chip->tcpci); + + return 0; +} + +static int rt1711h_remove(struct i2c_client *client) +{ + struct rt1711h_chip *chip = i2c_get_clientdata(client); + + tcpci_unregister_port(chip->tcpci); + return 0; +} + +static const struct i2c_device_id rt1711h_id[] = { + { "rt1711h", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rt1711h_id); + +#ifdef CONFIG_OF +static const struct of_device_id rt1711h_of_match[] = { + { .compatible = "richtek,rt1711h", }, + {}, +}; +MODULE_DEVICE_TABLE(of, rt1711h_of_match); +#endif + +static struct i2c_driver rt1711h_i2c_driver = { + .driver = { + .name = "rt1711h", + .of_match_table = of_match_ptr(rt1711h_of_match), + }, + .probe = rt1711h_probe, + .remove = rt1711h_remove, + .id_table = rt1711h_id, +}; +module_i2c_driver(rt1711h_i2c_driver); + +MODULE_AUTHOR("ShuFan Lee <shufan_lee@richtek.com>"); +MODULE_DESCRIPTION("RT1711H USB Type-C Port Controller Interface Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index d9b561d89432..d99fec44036c 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -290,7 +290,7 @@ EXPORT_SYMBOL(tty_termios_copy_hw); * between the two termios structures, or a speed change is needed. */ -int tty_termios_hw_change(struct ktermios *a, struct ktermios *b) +int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b) { if (a->c_ispeed != b->c_ispeed || a->c_ospeed != b->c_ospeed) return 1; diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 98b7cb3d0064..0bf244d50544 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -450,7 +450,7 @@ void hw_phymode_configure(struct ci_hdrc *ci); void ci_platform_configure(struct ci_hdrc *ci); -int dbg_create_files(struct ci_hdrc *ci); +void dbg_create_files(struct ci_hdrc *ci); void dbg_remove_files(struct ci_hdrc *ci); #endif /* __DRIVERS_USB_CHIPIDEA_CI_H */ diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index e431c5aafe35..19f5f5f2a48a 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -291,7 +291,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) pdata.usb_phy = data->phy; - if (of_device_is_compatible(np, "fsl,imx53-usb") && pdata.usb_phy && + if ((of_device_is_compatible(np, "fsl,imx53-usb") || + of_device_is_compatible(np, "fsl,imx51-usb")) && pdata.usb_phy && of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI) { pdata.flags |= CI_HDRC_OVERRIDE_PHY_CONTROL; data->override_phy_control = true; diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 33ae87fa3ff3..85fc6db48e44 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -1062,9 +1062,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) ci_hdrc_otg_fsm_start(ci); device_set_wakeup_capable(&pdev->dev, true); - ret = dbg_create_files(ci); - if (ret) - goto stop; + dbg_create_files(ci); ret = sysfs_create_group(&dev->kobj, &ci_attr_group); if (ret) diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index ce648cb3ed94..fcc91a338875 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -340,54 +340,28 @@ DEFINE_SHOW_ATTRIBUTE(ci_registers); * * This function returns an error code */ -int dbg_create_files(struct ci_hdrc *ci) +void dbg_create_files(struct ci_hdrc *ci) { - struct dentry *dent; - ci->debugfs = debugfs_create_dir(dev_name(ci->dev), NULL); - if (!ci->debugfs) - return -ENOMEM; - - dent = debugfs_create_file("device", S_IRUGO, ci->debugfs, ci, - &ci_device_fops); - if (!dent) - goto err; - - dent = debugfs_create_file("port_test", S_IRUGO | S_IWUSR, ci->debugfs, - ci, &ci_port_test_fops); - if (!dent) - goto err; - - dent = debugfs_create_file("qheads", S_IRUGO, ci->debugfs, ci, - &ci_qheads_fops); - if (!dent) - goto err; - dent = debugfs_create_file("requests", S_IRUGO, ci->debugfs, ci, - &ci_requests_fops); - if (!dent) - goto err; + debugfs_create_file("device", S_IRUGO, ci->debugfs, ci, + &ci_device_fops); + debugfs_create_file("port_test", S_IRUGO | S_IWUSR, ci->debugfs, ci, + &ci_port_test_fops); + debugfs_create_file("qheads", S_IRUGO, ci->debugfs, ci, + &ci_qheads_fops); + debugfs_create_file("requests", S_IRUGO, ci->debugfs, ci, + &ci_requests_fops); if (ci_otg_is_fsm_mode(ci)) { - dent = debugfs_create_file("otg", S_IRUGO, ci->debugfs, ci, - &ci_otg_fops); - if (!dent) - goto err; + debugfs_create_file("otg", S_IRUGO, ci->debugfs, ci, + &ci_otg_fops); } - dent = debugfs_create_file("role", S_IRUGO | S_IWUSR, ci->debugfs, ci, - &ci_role_fops); - if (!dent) - goto err; - - dent = debugfs_create_file("registers", S_IRUGO, ci->debugfs, ci, - &ci_registers_fops); - - if (dent) - return 0; -err: - debugfs_remove_recursive(ci->debugfs); - return -ENOMEM; + debugfs_create_file("role", S_IRUGO | S_IWUSR, ci->debugfs, ci, + &ci_role_fops); + debugfs_create_file("registers", S_IRUGO, ci->debugfs, ci, + &ci_registers_fops); } /** diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index bdb1de0c0cef..529295a17579 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -21,7 +21,6 @@ #include <linux/usb/tmc.h> -#define RIGOL 1 #define USBTMC_HEADER_SIZE 12 #define USBTMC_MINOR_BASE 176 @@ -93,8 +92,6 @@ struct usbtmc_device_data { /* coalesced usb488_caps from usbtmc_dev_capabilities */ __u8 usb488_caps; - u8 rigol_quirk; - /* attributes from the USB TMC spec for this device */ u8 TermChar; bool TermCharEnabled; @@ -110,17 +107,6 @@ struct usbtmc_device_data { }; #define to_usbtmc_data(d) container_of(d, struct usbtmc_device_data, kref) -struct usbtmc_ID_rigol_quirk { - __u16 idVendor; - __u16 idProduct; -}; - -static const struct usbtmc_ID_rigol_quirk usbtmc_id_quirk[] = { - { 0x1ab1, 0x0588 }, - { 0x1ab1, 0x04b0 }, - { 0, 0 } -}; - /* Forward declarations */ static struct usb_driver usbtmc_driver; @@ -603,16 +589,14 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, goto exit; } - if (data->rigol_quirk) { - dev_dbg(dev, "usb_bulk_msg_in: count(%zu)\n", count); + dev_dbg(dev, "usb_bulk_msg_in: count(%zu)\n", count); - retval = send_request_dev_dep_msg_in(data, count); + retval = send_request_dev_dep_msg_in(data, count); - if (retval < 0) { - if (data->auto_abort) - usbtmc_ioctl_abort_bulk_out(data); - goto exit; - } + if (retval < 0) { + if (data->auto_abort) + usbtmc_ioctl_abort_bulk_out(data); + goto exit; } /* Loop until we have fetched everything we requested */ @@ -621,23 +605,6 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, done = 0; while (remaining > 0) { - if (!data->rigol_quirk) { - dev_dbg(dev, "usb_bulk_msg_in: remaining(%zu), count(%zu)\n", remaining, count); - - if (remaining > USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE - 3) - this_part = USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE - 3; - else - this_part = remaining; - - retval = send_request_dev_dep_msg_in(data, this_part); - if (retval < 0) { - dev_err(dev, "usb_bulk_msg returned %d\n", retval); - if (data->auto_abort) - usbtmc_ioctl_abort_bulk_out(data); - goto exit; - } - } - /* Send bulk URB */ retval = usb_bulk_msg(data->usb_dev, usb_rcvbulkpipe(data->usb_dev, @@ -658,7 +625,7 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, } /* Parse header in first packet */ - if ((done == 0) || !data->rigol_quirk) { + if (done == 0) { /* Sanity checks for the header */ if (actual < USBTMC_HEADER_SIZE) { dev_err(dev, "Device sent too small first packet: %u < %u\n", actual, USBTMC_HEADER_SIZE); @@ -698,20 +665,11 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, actual -= USBTMC_HEADER_SIZE; /* Check if the message is smaller than requested */ - if (data->rigol_quirk) { - if (remaining > n_characters) - remaining = n_characters; - /* Remove padding if it exists */ - if (actual > remaining) - actual = remaining; - } - else { - if (this_part > n_characters) - this_part = n_characters; - /* Remove padding if it exists */ - if (actual > this_part) - actual = this_part; - } + if (remaining > n_characters) + remaining = n_characters; + /* Remove padding if it exists */ + if (actual > remaining) + actual = remaining; dev_dbg(dev, "Bulk-IN header: N_characters(%u), bTransAttr(%u)\n", n_characters, buffer[8]); @@ -1365,7 +1323,6 @@ static int usbtmc_probe(struct usb_interface *intf, struct usbtmc_device_data *data; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *bulk_in, *bulk_out, *int_in; - int n; int retcode; dev_dbg(&intf->dev, "%s called\n", __func__); @@ -1385,20 +1342,6 @@ static int usbtmc_probe(struct usb_interface *intf, atomic_set(&data->srq_asserted, 0); data->zombie = 0; - /* Determine if it is a Rigol or not */ - data->rigol_quirk = 0; - dev_dbg(&intf->dev, "Trying to find if device Vendor 0x%04X Product 0x%04X has the RIGOL quirk\n", - le16_to_cpu(data->usb_dev->descriptor.idVendor), - le16_to_cpu(data->usb_dev->descriptor.idProduct)); - for(n = 0; usbtmc_id_quirk[n].idVendor > 0; n++) { - if ((usbtmc_id_quirk[n].idVendor == le16_to_cpu(data->usb_dev->descriptor.idVendor)) && - (usbtmc_id_quirk[n].idProduct == le16_to_cpu(data->usb_dev->descriptor.idProduct))) { - dev_dbg(&intf->dev, "Setting this device as having the RIGOL quirk\n"); - data->rigol_quirk = 1; - break; - } - } - /* Initialize USBTMC bTag and other fields */ data->bTag = 1; data->TermCharEnabled = 0; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 0a42c5df3c0f..1c21955fe7c0 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -33,7 +33,6 @@ #include <linux/phy/phy.h> #include <linux/usb.h> #include <linux/usb/hcd.h> -#include <linux/usb/phy.h> #include <linux/usb/otg.h> #include "usb.h" @@ -568,6 +567,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) switch (wValue & 0xff00) { case USB_DT_DEVICE << 8: switch (hcd->speed) { + case HCD_USB32: case HCD_USB31: bufp = usb31_rh_dev_descriptor; break; @@ -592,6 +592,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) break; case USB_DT_CONFIG << 8: switch (hcd->speed) { + case HCD_USB32: case HCD_USB31: case HCD_USB3: bufp = ss_rh_config_descriptor; @@ -2742,34 +2743,14 @@ int usb_add_hcd(struct usb_hcd *hcd, int retval; struct usb_device *rhdev; - if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->skip_phy_initialization) { - struct usb_phy *phy = usb_get_phy_dev(hcd->self.sysdev, 0); - - if (IS_ERR(phy)) { - retval = PTR_ERR(phy); - if (retval == -EPROBE_DEFER) - return retval; - } else { - retval = usb_phy_init(phy); - if (retval) { - usb_put_phy(phy); - return retval; - } - hcd->usb_phy = phy; - hcd->remove_phy = 1; - } - } - if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); - if (IS_ERR(hcd->phy_roothub)) { - retval = PTR_ERR(hcd->phy_roothub); - goto err_phy_roothub_alloc; - } + if (IS_ERR(hcd->phy_roothub)) + return PTR_ERR(hcd->phy_roothub); retval = usb_phy_roothub_init(hcd->phy_roothub); if (retval) - goto err_phy_roothub_alloc; + return retval; retval = usb_phy_roothub_power_on(hcd->phy_roothub); if (retval) @@ -2819,6 +2800,9 @@ int usb_add_hcd(struct usb_hcd *hcd, hcd->self.root_hub = rhdev; mutex_unlock(&usb_port_peer_mutex); + rhdev->rx_lanes = 1; + rhdev->tx_lanes = 1; + switch (hcd->speed) { case HCD_USB11: rhdev->speed = USB_SPEED_FULL; @@ -2832,6 +2816,10 @@ int usb_add_hcd(struct usb_hcd *hcd, case HCD_USB3: rhdev->speed = USB_SPEED_SUPER; break; + case HCD_USB32: + rhdev->rx_lanes = 2; + rhdev->tx_lanes = 2; + /* fall through */ case HCD_USB31: rhdev->speed = USB_SPEED_SUPER_PLUS; break; @@ -2943,12 +2931,7 @@ err_create_buf: usb_phy_roothub_power_off(hcd->phy_roothub); err_usb_phy_roothub_power_on: usb_phy_roothub_exit(hcd->phy_roothub); -err_phy_roothub_alloc: - if (hcd->remove_phy && hcd->usb_phy) { - usb_phy_shutdown(hcd->usb_phy); - usb_put_phy(hcd->usb_phy); - hcd->usb_phy = NULL; - } + return retval; } EXPORT_SYMBOL_GPL(usb_add_hcd); @@ -3024,12 +3007,6 @@ void usb_remove_hcd(struct usb_hcd *hcd) usb_phy_roothub_power_off(hcd->phy_roothub); usb_phy_roothub_exit(hcd->phy_roothub); - if (hcd->remove_phy && hcd->usb_phy) { - usb_phy_shutdown(hcd->usb_phy); - usb_put_phy(hcd->usb_phy); - hcd->usb_phy = NULL; - } - usb_put_invalidate_rhdev(hcd); hcd->flags = 0; } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index aa9968d90a48..26c2438d2889 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2636,7 +2636,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub) #define SET_ADDRESS_TRIES 2 #define GET_DESCRIPTOR_TRIES 2 #define SET_CONFIG_TRIES (2 * (use_both_schemes + 1)) -#define USE_NEW_SCHEME(i) ((i) / 2 == (int)old_scheme_first) +#define USE_NEW_SCHEME(i, scheme) ((i) / 2 == (int)scheme) #define HUB_ROOT_RESET_TIME 60 /* times are in msec */ #define HUB_SHORT_RESET_TIME 10 @@ -2651,12 +2651,16 @@ static unsigned hub_is_wusb(struct usb_hub *hub) * enumeration failures, so disable this enumeration scheme for USB3 * devices. */ -static bool use_new_scheme(struct usb_device *udev, int retry) +static bool use_new_scheme(struct usb_device *udev, int retry, + struct usb_port *port_dev) { + int old_scheme_first_port = + port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME; + if (udev->speed >= USB_SPEED_SUPER) return false; - return USE_NEW_SCHEME(retry); + return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first); } /* Is a USB 3.0 port in the Inactive or Compliance Mode state? @@ -2751,6 +2755,14 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if (!udev) return 0; + if (hub_is_superspeedplus(hub->hdev)) { + /* extended portstatus Rx and Tx lane count are zero based */ + udev->rx_lanes = USB_EXT_PORT_RX_LANES(ext_portstatus) + 1; + udev->tx_lanes = USB_EXT_PORT_TX_LANES(ext_portstatus) + 1; + } else { + udev->rx_lanes = 1; + udev->tx_lanes = 1; + } if (hub_is_wusb(hub)) udev->speed = USB_SPEED_WIRELESS; else if (hub_is_superspeedplus(hub->hdev) && @@ -2867,7 +2879,11 @@ static int hub_port_reset(struct usb_hub *hub, int port1, done: if (status == 0) { /* TRSTRCY = 10 ms; plus some extra */ - msleep(10 + 40); + if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM) + usleep_range(10000, 12000); + else + msleep(10 + 40); + if (udev) { struct usb_hcd *hcd = bus_to_hcd(udev->bus); @@ -3376,6 +3392,10 @@ static int wait_for_connected(struct usb_device *udev, while (delay_ms < 2000) { if (status || *portstatus & USB_PORT_STAT_CONNECTION) break; + if (!port_is_power_on(hub, *portstatus)) { + status = -ENODEV; + break; + } msleep(20); delay_ms += 20; status = hub_port_status(hub, *port1, portstatus, portchange); @@ -4380,6 +4400,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, { struct usb_device *hdev = hub->hdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); + struct usb_port *port_dev = hub->ports[port1 - 1]; int retries, operations, retval, i; unsigned delay = HUB_SHORT_RESET_TIME; enum usb_device_speed oldspeed = udev->speed; @@ -4501,7 +4522,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { bool did_new_scheme = false; - if (use_new_scheme(udev, retry_counter)) { + if (use_new_scheme(udev, retry_counter, port_dev)) { struct usb_device_descriptor *buf; int r = 0; @@ -4551,7 +4572,9 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * reset. But only on the first attempt, * lest we get into a time out/reset loop */ - if (r == 0 || (r == -ETIMEDOUT && retries == 0)) + if (r == 0 || (r == -ETIMEDOUT && + retries == 0 && + udev->speed > USB_SPEED_FULL)) break; } udev->descriptor.bMaxPacketSize0 = @@ -4598,9 +4621,12 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, if (udev->speed >= USB_SPEED_SUPER) { devnum = udev->devnum; dev_info(&udev->dev, - "%s SuperSpeed%s USB device number %d using %s\n", + "%s SuperSpeed%s%s USB device number %d using %s\n", (udev->config) ? "reset" : "new", - (udev->speed == USB_SPEED_SUPER_PLUS) ? "Plus" : "", + (udev->speed == USB_SPEED_SUPER_PLUS) ? + "Plus Gen 2" : " Gen 1", + (udev->rx_lanes == 2 && udev->tx_lanes == 2) ? + "x2" : "", devnum, driver_name); } diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 4dc769ee9c74..4accfb63f7dc 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -98,6 +98,7 @@ struct usb_port { struct mutex status_lock; u32 over_current_count; u8 portnum; + u32 quirks; unsigned int is_superspeed:1; unsigned int usb3_lpm_u1_permit:1; unsigned int usb3_lpm_u2_permit:1; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 0c11d40a12bc..7b137003c2be 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -940,7 +940,7 @@ int usb_set_isoch_delay(struct usb_device *dev) return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_ISOCH_DELAY, USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - cpu_to_le16(dev->hub_delay), 0, NULL, 0, + dev->hub_delay, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); } diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 6979bde87d31..4a2143195395 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -50,6 +50,28 @@ static ssize_t over_current_count_show(struct device *dev, } static DEVICE_ATTR_RO(over_current_count); +static ssize_t quirks_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_port *port_dev = to_usb_port(dev); + + return sprintf(buf, "%08x\n", port_dev->quirks); +} + +static ssize_t quirks_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_port *port_dev = to_usb_port(dev); + u32 value; + + if (kstrtou32(buf, 16, &value)) + return -EINVAL; + + port_dev->quirks = value; + return count; +} +static DEVICE_ATTR_RW(quirks); + static ssize_t usb3_lpm_permit_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -118,6 +140,7 @@ static DEVICE_ATTR_RW(usb3_lpm_permit); static struct attribute *port_dev_attrs[] = { &dev_attr_connect_type.attr, + &dev_attr_quirks.attr, &dev_attr_over_current_count.attr, NULL, }; diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 27bb34043053..ea18284dfa9a 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -175,6 +175,26 @@ static ssize_t speed_show(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR_RO(speed); +static ssize_t rx_lanes_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sprintf(buf, "%d\n", udev->rx_lanes); +} +static DEVICE_ATTR_RO(rx_lanes); + +static ssize_t tx_lanes_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sprintf(buf, "%d\n", udev->tx_lanes); +} +static DEVICE_ATTR_RO(tx_lanes); + static ssize_t busnum_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -790,6 +810,8 @@ static struct attribute *dev_attrs[] = { &dev_attr_bNumConfigurations.attr, &dev_attr_bMaxPacketSize0.attr, &dev_attr_speed.attr, + &dev_attr_rx_lanes.attr, + &dev_attr_tx_lanes.attr, &dev_attr_busnum.attr, &dev_attr_devnum.attr, &dev_attr_devpath.attr, diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 0adb6345ff2e..623be3174fb3 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1167,30 +1167,16 @@ static struct notifier_block usb_bus_nb = { struct dentry *usb_debug_root; EXPORT_SYMBOL_GPL(usb_debug_root); -static struct dentry *usb_debug_devices; - -static int usb_debugfs_init(void) +static void usb_debugfs_init(void) { usb_debug_root = debugfs_create_dir("usb", NULL); - if (!usb_debug_root) - return -ENOENT; - - usb_debug_devices = debugfs_create_file("devices", 0444, - usb_debug_root, NULL, - &usbfs_devices_fops); - if (!usb_debug_devices) { - debugfs_remove(usb_debug_root); - usb_debug_root = NULL; - return -ENOENT; - } - - return 0; + debugfs_create_file("devices", 0444, usb_debug_root, NULL, + &usbfs_devices_fops); } static void usb_debugfs_cleanup(void) { - debugfs_remove(usb_debug_devices); - debugfs_remove(usb_debug_root); + debugfs_remove_recursive(usb_debug_root); } /* @@ -1205,9 +1191,7 @@ static int __init usb_init(void) } usb_init_pool_max(); - retval = usb_debugfs_init(); - if (retval) - goto out; + usb_debugfs_init(); usb_acpi_register(); retval = bus_register(&usb_bus_type); diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 18a0a1771289..1c36a6a9dd63 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -419,6 +419,8 @@ static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg, /** * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce * filter is enabled. + * + * @hsotg: Programming view of DWC_otg controller */ static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg) { @@ -564,6 +566,9 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait) * If a force is done, it requires a IDDIG debounce filter delay if * the filter is configured and enabled. We poll the current mode of * the controller to account for this delay. + * + * @hsotg: Programming view of DWC_otg controller + * @host: Host mode flag */ void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) { @@ -610,6 +615,8 @@ void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) * or not because the value of the connector ID status is affected by * the force mode. We only need to call this once during probe if * dr_mode == OTG. + * + * @hsotg: Programming view of DWC_otg controller */ static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg) { diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index a666e0758a99..4a56ac772a3c 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -164,12 +164,11 @@ struct dwc2_hsotg_req; * and has yet to be completed (maybe due to data move, or simply * awaiting an ack from the core all the data has been completed). * @debugfs: File entry for debugfs file for this endpoint. - * @lock: State lock to protect contents of endpoint. * @dir_in: Set to true if this endpoint is of the IN direction, which * means that it is sending data to the Host. * @index: The index for the endpoint registers. * @mc: Multi Count - number of transactions per microframe - * @interval - Interval for periodic endpoints, in frames or microframes. + * @interval: Interval for periodic endpoints, in frames or microframes. * @name: The name array passed to the USB core. * @halted: Set if the endpoint has been halted. * @periodic: Set if this is a periodic ep, such as Interrupt @@ -178,10 +177,11 @@ struct dwc2_hsotg_req; * @desc_list_dma: The DMA address of descriptor chain currently in use. * @desc_list: Pointer to descriptor DMA chain head currently in use. * @desc_count: Count of entries within the DMA descriptor chain of EP. - * @isoc_chain_num: Number of ISOC chain currently in use - either 0 or 1. * @next_desc: index of next free descriptor in the ISOC chain under SW control. + * @compl_desc: index of next descriptor to be completed by xFerComplete * @total_data: The total number of data bytes done. * @fifo_size: The size of the FIFO (for periodic IN endpoints) + * @fifo_index: For Dedicated FIFO operation, only FIFO0 can be used for EP0. * @fifo_load: The amount of data loaded into the FIFO (periodic IN) * @last_load: The offset of data for the last start of request. * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN @@ -231,8 +231,8 @@ struct dwc2_hsotg_ep { struct dwc2_dma_desc *desc_list; u8 desc_count; - unsigned char isoc_chain_num; unsigned int next_desc; + unsigned int compl_desc; char name[10]; }; @@ -380,6 +380,12 @@ enum dwc2_ep0_state { * is FS. * 0 - No (default) * 1 - Yes + * @ipg_isoc_en: Indicates the IPG supports is enabled or disabled. + * 0 - Disable (default) + * 1 - Enable + * @acg_enable: For enabling Active Clock Gating in the controller + * 0 - No + * 1 - Yes * @ulpi_fs_ls: Make ULPI phy operate in FS/LS mode only * 0 - No (default) * 1 - Yes @@ -511,6 +517,7 @@ struct dwc2_core_params { bool hird_threshold_en; u8 hird_threshold; bool activate_stm_fs_transceiver; + bool ipg_isoc_en; u16 max_packet_count; u32 max_transfer_size; u32 ahbcfg; @@ -548,7 +555,7 @@ struct dwc2_core_params { * * The values that are not in dwc2_core_params are documented below. * - * @op_mode Mode of Operation + * @op_mode: Mode of Operation * 0 - HNP- and SRP-Capable OTG (Host & Device) * 1 - SRP-Capable OTG (Host & Device) * 2 - Non-HNP and Non-SRP Capable OTG (Host & Device) @@ -556,43 +563,102 @@ struct dwc2_core_params { * 4 - Non-OTG Device * 5 - SRP-Capable Host * 6 - Non-OTG Host - * @arch Architecture + * @arch: Architecture * 0 - Slave only * 1 - External DMA * 2 - Internal DMA - * @power_optimized Are power optimizations enabled? - * @num_dev_ep Number of device endpoints available - * @num_dev_in_eps Number of device IN endpoints available - * @num_dev_perio_in_ep Number of device periodic IN endpoints - * available - * @dev_token_q_depth Device Mode IN Token Sequence Learning Queue + * @ipg_isoc_en: This feature indicates that the controller supports + * the worst-case scenario of Rx followed by Rx + * Interpacket Gap (IPG) (32 bitTimes) as per the utmi + * specification for any token following ISOC OUT token. + * 0 - Don't support + * 1 - Support + * @power_optimized: Are power optimizations enabled? + * @num_dev_ep: Number of device endpoints available + * @num_dev_in_eps: Number of device IN endpoints available + * @num_dev_perio_in_ep: Number of device periodic IN endpoints + * available + * @dev_token_q_depth: Device Mode IN Token Sequence Learning Queue * Depth * 0 to 30 - * @host_perio_tx_q_depth + * @host_perio_tx_q_depth: * Host Mode Periodic Request Queue Depth * 2, 4 or 8 - * @nperio_tx_q_depth + * @nperio_tx_q_depth: * Non-Periodic Request Queue Depth * 2, 4 or 8 - * @hs_phy_type High-speed PHY interface type + * @hs_phy_type: High-speed PHY interface type * 0 - High-speed interface not supported * 1 - UTMI+ * 2 - ULPI * 3 - UTMI+ and ULPI - * @fs_phy_type Full-speed PHY interface type + * @fs_phy_type: Full-speed PHY interface type * 0 - Full speed interface not supported * 1 - Dedicated full speed interface * 2 - FS pins shared with UTMI+ pins * 3 - FS pins shared with ULPI pins * @total_fifo_size: Total internal RAM for FIFOs (bytes) - * @hibernation Is hibernation enabled? - * @utmi_phy_data_width UTMI+ PHY data width + * @hibernation: Is hibernation enabled? + * @utmi_phy_data_width: UTMI+ PHY data width * 0 - 8 bits * 1 - 16 bits * 2 - 8 or 16 bits * @snpsid: Value from SNPSID register * @dev_ep_dirs: Direction of device endpoints (GHWCFG1) - * @g_tx_fifo_size[] Power-on values of TxFIFO sizes + * @g_tx_fifo_size: Power-on values of TxFIFO sizes + * @dma_desc_enable: When DMA mode is enabled, specifies whether to use + * address DMA mode or descriptor DMA mode for accessing + * the data FIFOs. The driver will automatically detect the + * value for this if none is specified. + * 0 - Address DMA + * 1 - Descriptor DMA (default, if available) + * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default, if available) + * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs + * are enabled for non-periodic IN endpoints in device + * mode. + * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO + * in host mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in + * host mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @max_transfer_size: The maximum transfer size supported, in bytes + * 2047 to 65,535 + * Actual maximum value is autodetected and also + * the default. + * @max_packet_count: The maximum number of packets in a transfer + * 15 to 511 + * Actual maximum value is autodetected and also + * the default. + * @host_channels: The number of host channel registers to use + * 1 to 16 + * Actual maximum value is autodetected and also + * the default. + * @dev_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO + * in device mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @i2c_enable: Specifies whether to use the I2Cinterface for a full + * speed PHY. This parameter is only applicable if phy_type + * is FS. + * 0 - No (default) + * 1 - Yes + * @acg_enable: For enabling Active Clock Gating in the controller + * 0 - Disable + * 1 - Enable + * @lpm_mode: For enabling Link Power Management in the controller + * 0 - Disable + * 1 - Enable + * @rx_fifo_size: Number of 4-byte words in the Rx FIFO when dynamic + * FIFO sizing is enabled 16 to 32768 + * Actual maximum value is autodetected and also + * the default. */ struct dwc2_hw_params { unsigned op_mode:3; @@ -622,6 +688,7 @@ struct dwc2_hw_params { unsigned hibernation:1; unsigned utmi_phy_data_width:2; unsigned lpm_mode:1; + unsigned ipg_isoc_en:1; u32 snpsid; u32 dev_ep_dirs; u32 g_tx_fifo_size[MAX_EPS_CHANNELS]; @@ -642,7 +709,11 @@ struct dwc2_hw_params { * @gi2cctl: Backup of GI2CCTL register * @glpmcfg: Backup of GLPMCFG register * @gdfifocfg: Backup of GDFIFOCFG register + * @pcgcctl: Backup of PCGCCTL register + * @pcgcctl1: Backup of PCGCCTL1 register + * @dtxfsiz: Backup of DTXFSIZ registers for each endpoint * @gpwrdn: Backup of GPWRDN register + * @valid: True if registers values backuped. */ struct dwc2_gregs_backup { u32 gotgctl; @@ -675,6 +746,7 @@ struct dwc2_gregs_backup { * @doeptsiz: Backup of DOEPTSIZ register * @doepdma: Backup of DOEPDMA register * @dtxfsiz: Backup of DTXFSIZ registers for each endpoint + * @valid: True if registers values backuped. */ struct dwc2_dregs_backup { u32 dcfg; @@ -698,9 +770,10 @@ struct dwc2_dregs_backup { * @hcfg: Backup of HCFG register * @haintmsk: Backup of HAINTMSK register * @hcintmsk: Backup of HCINTMSK register - * @hptr0: Backup of HPTR0 register + * @hprt0: Backup of HPTR0 register * @hfir: Backup of HFIR register * @hptxfsiz: Backup of HPTXFSIZ register + * @valid: True if registers values backuped. */ struct dwc2_hregs_backup { u32 hcfg; @@ -800,7 +873,7 @@ struct dwc2_hregs_backup { * @regs: Pointer to controller regs * @hw_params: Parameters that were autodetected from the * hardware registers - * @core_params: Parameters that define how the core should be configured + * @params: Parameters that define how the core should be configured * @op_state: The operational State, during transitions (a_host=> * a_peripheral and b_device=>b_host) this may not match * the core, but allows the software to determine @@ -809,10 +882,13 @@ struct dwc2_hregs_backup { * - USB_DR_MODE_PERIPHERAL * - USB_DR_MODE_HOST * - USB_DR_MODE_OTG - * @hcd_enabled Host mode sub-driver initialization indicator. - * @gadget_enabled Peripheral mode sub-driver initialization indicator. - * @ll_hw_enabled Status of low-level hardware resources. + * @hcd_enabled: Host mode sub-driver initialization indicator. + * @gadget_enabled: Peripheral mode sub-driver initialization indicator. + * @ll_hw_enabled: Status of low-level hardware resources. * @hibernated: True if core is hibernated + * @frame_number: Frame number read from the core. For both device + * and host modes. The value ranges are from 0 + * to HFNUM_MAX_FRNUM. * @phy: The otg phy transceiver structure for phy control. * @uphy: The otg phy transceiver structure for old USB phy * control. @@ -832,13 +908,25 @@ struct dwc2_hregs_backup { * interrupt * @wkp_timer: Timer object for handling Wakeup Detected interrupt * @lx_state: Lx state of connected device - * @gregs_backup: Backup of global registers during suspend - * @dregs_backup: Backup of device registers during suspend - * @hregs_backup: Backup of host registers during suspend + * @gr_backup: Backup of global registers during suspend + * @dr_backup: Backup of device registers during suspend + * @hr_backup: Backup of host registers during suspend * * These are for host mode: * * @flags: Flags for handling root port state changes + * @flags.d32: Contain all root port flags + * @flags.b: Separate root port flags from each other + * @flags.b.port_connect_status_change: True if root port connect status + * changed + * @flags.b.port_connect_status: True if device connected to root port + * @flags.b.port_reset_change: True if root port reset status changed + * @flags.b.port_enable_change: True if root port enable status changed + * @flags.b.port_suspend_change: True if root port suspend status changed + * @flags.b.port_over_current_change: True if root port over current state + * changed. + * @flags.b.port_l1_change: True if root port l1 status changed + * @flags.b.reserved: Reserved bits of root port register * @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule. * Transfers associated with these QHs are not currently * assigned to a host channel. @@ -847,6 +935,9 @@ struct dwc2_hregs_backup { * assigned to a host channel. * @non_periodic_qh_ptr: Pointer to next QH to process in the active * non-periodic schedule + * @non_periodic_sched_waiting: Waiting QHs in the non-periodic schedule. + * Transfers associated with these QHs are not currently + * assigned to a host channel. * @periodic_sched_inactive: Inactive QHs in the periodic schedule. This is a * list of QHs for periodic transfers that are _not_ * scheduled for the next frame. Each QH in the list has an @@ -886,8 +977,6 @@ struct dwc2_hregs_backup { * @hs_periodic_bitmap: Bitmap used by the microframe scheduler any time the * host is in high speed mode; low speed schedules are * stored elsewhere since we need one per TT. - * @frame_number: Frame number read from the core at SOF. The value ranges - * from 0 to HFNUM_MAX_FRNUM. * @periodic_qh_count: Count of periodic QHs, if using several eps. Used for * SOF enable/disable. * @free_hc_list: Free host channels in the controller. This is a list of @@ -898,8 +987,8 @@ struct dwc2_hregs_backup { * host channel is available for non-periodic transactions. * @non_periodic_channels: Number of host channels assigned to non-periodic * transfers - * @available_host_channels Number of host channels available for the microframe - * scheduler to use + * @available_host_channels: Number of host channels available for the + * microframe scheduler to use * @hc_ptr_array: Array of pointers to the host channel descriptors. * Allows accessing a host channel descriptor given the * host channel number. This is useful in interrupt @@ -922,9 +1011,6 @@ struct dwc2_hregs_backup { * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. * @num_of_eps: Number of available EPs (excluding EP0) * @debug_root: Root directrory for debugfs. - * @debug_file: Main status file for debugfs. - * @debug_testmode: Testmode status file for debugfs. - * @debug_fifo: FIFO status file for debugfs. * @ep0_reply: Request used for ep0 reply. * @ep0_buff: Buffer for EP0 reply data, if needed. * @ctrl_buff: Buffer for EP0 control requests. @@ -939,7 +1025,37 @@ struct dwc2_hregs_backup { * @ctrl_in_desc: EP0 IN data phase desc chain pointer * @ctrl_out_desc_dma: EP0 OUT data phase desc chain DMA address * @ctrl_out_desc: EP0 OUT data phase desc chain pointer - * @eps: The endpoints being supplied to the gadget framework + * @irq: Interrupt request line number + * @clk: Pointer to otg clock + * @reset: Pointer to dwc2 reset controller + * @reset_ecc: Pointer to dwc2 optional reset controller in Stratix10. + * @regset: A pointer to a struct debugfs_regset32, which contains + * a pointer to an array of register definitions, the + * array size and the base address where the register bank + * is to be found. + * @bus_suspended: True if bus is suspended + * @last_frame_num: Number of last frame. Range from 0 to 32768 + * @frame_num_array: Used only if CONFIG_USB_DWC2_TRACK_MISSED_SOFS is + * defined, for missed SOFs tracking. Array holds that + * frame numbers, which not equal to last_frame_num +1 + * @last_frame_num_array: Used only if CONFIG_USB_DWC2_TRACK_MISSED_SOFS is + * defined, for missed SOFs tracking. + * If current_frame_number != last_frame_num+1 + * then last_frame_num added to this array + * @frame_num_idx: Actual size of frame_num_array and last_frame_num_array + * @dumped_frame_num_array: 1 - if missed SOFs frame numbers dumbed + * 0 - if missed SOFs frame numbers not dumbed + * @fifo_mem: Total internal RAM for FIFOs (bytes) + * @fifo_map: Each bit intend for concrete fifo. If that bit is set, + * then that fifo is used + * @gadget: Represents a usb slave device + * @connected: Used in slave mode. True if device connected with host + * @eps_in: The IN endpoints being supplied to the gadget framework + * @eps_out: The OUT endpoints being supplied to the gadget framework + * @new_connection: Used in host mode. True if there are new connected + * device + * @enabled: Indicates the enabling state of controller + * */ struct dwc2_hsotg { struct device *dev; @@ -954,6 +1070,7 @@ struct dwc2_hsotg { unsigned int gadget_enabled:1; unsigned int ll_hw_enabled:1; unsigned int hibernated:1; + u16 frame_number; struct phy *phy; struct usb_phy *uphy; @@ -1029,7 +1146,6 @@ struct dwc2_hsotg { u16 periodic_usecs; unsigned long hs_periodic_bitmap[ DIV_ROUND_UP(DWC2_HS_SCHEDULE_US, BITS_PER_LONG)]; - u16 frame_number; u16 periodic_qh_count; bool bus_suspended; bool new_connection; diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index 2982a155734d..cc90b58b6b3c 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -778,6 +778,14 @@ irqreturn_t dwc2_handle_common_intr(int irq, void *dev) goto out; } + /* Reading current frame number value in device or host modes. */ + if (dwc2_is_device_mode(hsotg)) + hsotg->frame_number = (dwc2_readl(hsotg->regs + DSTS) + & DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT; + else + hsotg->frame_number = (dwc2_readl(hsotg->regs + HFNUM) + & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; + gintsts = dwc2_read_common_intr(hsotg); if (gintsts & ~GINTSTS_PRTINT) retval = IRQ_HANDLED; diff --git a/drivers/usb/dwc2/debug.h b/drivers/usb/dwc2/debug.h index 6f23219c13cb..a8c565b6bc34 100644 --- a/drivers/usb/dwc2/debug.h +++ b/drivers/usb/dwc2/debug.h @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * debug.h - Designware USB2 DRD controller debug header * * Copyright (C) 2015 Intel Corporation diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c index 58c691f882a8..d0bdb7997557 100644 --- a/drivers/usb/dwc2/debugfs.c +++ b/drivers/usb/dwc2/debugfs.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * debugfs.c - Designware USB2 DRD controller debugfs * * Copyright (C) 2015 Intel Corporation @@ -16,12 +16,13 @@ #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + /** - * testmode_write - debugfs: change usb test mode - * @seq: The seq file to write to. - * @v: Unused parameter. - * - * This debugfs entry modify the current usb test mode. + * testmode_write() - change usb test mode state. + * @file: The file to write to. + * @ubuf: The buffer where user wrote. + * @count: The ubuf size. + * @ppos: Unused parameter. */ static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t count, loff_t *ppos) @@ -55,9 +56,9 @@ static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t } /** - * testmode_show - debugfs: show usb test mode state - * @seq: The seq file to write to. - * @v: Unused parameter. + * testmode_show() - debugfs: show usb test mode state + * @s: The seq file to write to. + * @unused: Unused parameter. * * This debugfs entry shows which usb test mode is currently enabled. */ @@ -293,52 +294,30 @@ DEFINE_SHOW_ATTRIBUTE(ep); static void dwc2_hsotg_create_debug(struct dwc2_hsotg *hsotg) { struct dentry *root; - struct dentry *file; unsigned int epidx; root = hsotg->debug_root; /* create general state file */ - - file = debugfs_create_file("state", 0444, root, hsotg, &state_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "%s: failed to create state\n", __func__); - - file = debugfs_create_file("testmode", 0644, root, hsotg, - &testmode_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "%s: failed to create testmode\n", - __func__); - - file = debugfs_create_file("fifo", 0444, root, hsotg, &fifo_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__); + debugfs_create_file("state", 0444, root, hsotg, &state_fops); + debugfs_create_file("testmode", 0644, root, hsotg, &testmode_fops); + debugfs_create_file("fifo", 0444, root, hsotg, &fifo_fops); /* Create one file for each out endpoint */ for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { struct dwc2_hsotg_ep *ep; ep = hsotg->eps_out[epidx]; - if (ep) { - file = debugfs_create_file(ep->name, 0444, - root, ep, &ep_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "failed to create %s debug file\n", - ep->name); - } + if (ep) + debugfs_create_file(ep->name, 0444, root, ep, &ep_fops); } /* Create one file for each in endpoint. EP0 is handled with out eps */ for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) { struct dwc2_hsotg_ep *ep; ep = hsotg->eps_in[epidx]; - if (ep) { - file = debugfs_create_file(ep->name, 0444, - root, ep, &ep_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "failed to create %s debug file\n", - ep->name); - } + if (ep) + debugfs_create_file(ep->name, 0444, root, ep, &ep_fops); } } #else @@ -368,7 +347,7 @@ static const struct debugfs_reg32 dwc2_regs[] = { dump_register(GINTSTS), dump_register(GINTMSK), dump_register(GRXSTSR), - dump_register(GRXSTSP), + /* Omit GRXSTSP */ dump_register(GRXFSIZ), dump_register(GNPTXFSIZ), dump_register(GNPTXSTS), @@ -710,6 +689,7 @@ static int params_show(struct seq_file *seq, void *v) print_param(seq, p, phy_ulpi_ddr); print_param(seq, p, phy_ulpi_ext_vbus); print_param(seq, p, i2c_enable); + print_param(seq, p, ipg_isoc_en); print_param(seq, p, ulpi_fs_ls); print_param(seq, p, host_support_fs_ls_low_power); print_param(seq, p, host_ls_low_power_phy_clk); @@ -790,32 +770,14 @@ DEFINE_SHOW_ATTRIBUTE(dr_mode); int dwc2_debugfs_init(struct dwc2_hsotg *hsotg) { int ret; - struct dentry *file; + struct dentry *root; - hsotg->debug_root = debugfs_create_dir(dev_name(hsotg->dev), NULL); - if (!hsotg->debug_root) { - ret = -ENOMEM; - goto err0; - } + root = debugfs_create_dir(dev_name(hsotg->dev), NULL); + hsotg->debug_root = root; - file = debugfs_create_file("params", 0444, - hsotg->debug_root, - hsotg, ¶ms_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "%s: failed to create params\n", __func__); - - file = debugfs_create_file("hw_params", 0444, - hsotg->debug_root, - hsotg, &hw_params_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "%s: failed to create hw_params\n", - __func__); - - file = debugfs_create_file("dr_mode", 0444, - hsotg->debug_root, - hsotg, &dr_mode_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "%s: failed to create dr_mode\n", __func__); + debugfs_create_file("params", 0444, root, hsotg, ¶ms_fops); + debugfs_create_file("hw_params", 0444, root, hsotg, &hw_params_fops); + debugfs_create_file("dr_mode", 0444, root, hsotg, &dr_mode_fops); /* Add gadget debugfs nodes */ dwc2_hsotg_create_debug(hsotg); @@ -824,24 +786,18 @@ int dwc2_debugfs_init(struct dwc2_hsotg *hsotg) GFP_KERNEL); if (!hsotg->regset) { ret = -ENOMEM; - goto err1; + goto err; } hsotg->regset->regs = dwc2_regs; hsotg->regset->nregs = ARRAY_SIZE(dwc2_regs); hsotg->regset->base = hsotg->regs; - file = debugfs_create_regset32("regdump", 0444, hsotg->debug_root, - hsotg->regset); - if (!file) { - ret = -ENOMEM; - goto err1; - } + debugfs_create_regset32("regdump", 0444, root, hsotg->regset); return 0; -err1: +err: debugfs_remove_recursive(hsotg->debug_root); -err0: return ret; } diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 83cb5577a52f..f0d9ccf1d665 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * @@ -107,7 +107,6 @@ static inline bool using_desc_dma(struct dwc2_hsotg *hsotg) /** * dwc2_gadget_incr_frame_num - Increments the targeted frame number. * @hs_ep: The endpoint - * @increment: The value to increment by * * This function will also check if the frame number overruns DSTS_SOFFN_LIMIT. * If an overrun occurs it will wrap the value and set the frame_overrun flag. @@ -190,6 +189,8 @@ static void dwc2_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg, /** * dwc2_hsotg_tx_fifo_count - return count of TX FIFOs in device mode + * + * @hsotg: Programming view of the DWC_otg controller */ int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg) { @@ -204,6 +205,8 @@ int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg) /** * dwc2_hsotg_tx_fifo_total_depth - return total FIFO depth available for * device mode TX FIFOs + * + * @hsotg: Programming view of the DWC_otg controller */ int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg) { @@ -227,6 +230,8 @@ int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg) /** * dwc2_hsotg_tx_fifo_average_depth - returns average depth of device mode * TX FIFOs + * + * @hsotg: Programming view of the DWC_otg controller */ int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg) { @@ -327,6 +332,7 @@ static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg) } /** + * dwc2_hsotg_ep_alloc_request - allocate USB rerequest structure * @ep: USB endpoint to allocate request for. * @flags: Allocation flags * @@ -793,9 +799,7 @@ static void dwc2_gadget_config_nonisoc_xfer_ddma(struct dwc2_hsotg_ep *hs_ep, * @dma_buff: usb requests dma buffer. * @len: usb request transfer length. * - * Finds out index of first free entry either in the bottom or up half of - * descriptor chain depend on which is under SW control and not processed - * by HW. Then fills that descriptor with the data of the arrived usb request, + * Fills next free descriptor with the data of the arrived usb request, * frame info, sets Last and IOC bits increments next_desc. If filled * descriptor is not the first one, removes L bit from the previous descriptor * status. @@ -810,34 +814,17 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, u32 mask = 0; maxsize = dwc2_gadget_get_desc_params(hs_ep, &mask); - if (len > maxsize) { - dev_err(hsotg->dev, "wrong len %d\n", len); - return -EINVAL; - } - - /* - * If SW has already filled half of chain, then return and wait for - * the other chain to be processed by HW. - */ - if (hs_ep->next_desc == MAX_DMA_DESC_NUM_GENERIC / 2) - return -EBUSY; - - /* Increment frame number by interval for IN */ - if (hs_ep->dir_in) - dwc2_gadget_incr_frame_num(hs_ep); - index = (MAX_DMA_DESC_NUM_GENERIC / 2) * hs_ep->isoc_chain_num + - hs_ep->next_desc; + index = hs_ep->next_desc; + desc = &hs_ep->desc_list[index]; - /* Sanity check of calculated index */ - if ((hs_ep->isoc_chain_num && index > MAX_DMA_DESC_NUM_GENERIC) || - (!hs_ep->isoc_chain_num && index > MAX_DMA_DESC_NUM_GENERIC / 2)) { - dev_err(hsotg->dev, "wrong index %d for iso chain\n", index); - return -EINVAL; + /* Check if descriptor chain full */ + if ((desc->status >> DEV_DMA_BUFF_STS_SHIFT) == + DEV_DMA_BUFF_STS_HREADY) { + dev_dbg(hsotg->dev, "%s: desc chain full\n", __func__); + return 1; } - desc = &hs_ep->desc_list[index]; - /* Clear L bit of previous desc if more than one entries in the chain */ if (hs_ep->next_desc) hs_ep->desc_list[index - 1].status &= ~DEV_DMA_L; @@ -865,8 +852,14 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, desc->status &= ~DEV_DMA_BUFF_STS_MASK; desc->status |= (DEV_DMA_BUFF_STS_HREADY << DEV_DMA_BUFF_STS_SHIFT); + /* Increment frame number by interval for IN */ + if (hs_ep->dir_in) + dwc2_gadget_incr_frame_num(hs_ep); + /* Update index of last configured entry in the chain */ hs_ep->next_desc++; + if (hs_ep->next_desc >= MAX_DMA_DESC_NUM_GENERIC) + hs_ep->next_desc = 0; return 0; } @@ -875,11 +868,8 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, * dwc2_gadget_start_isoc_ddma - start isochronous transfer in DDMA * @hs_ep: The isochronous endpoint. * - * Prepare first descriptor chain for isochronous endpoints. Afterwards + * Prepare descriptor chain for isochronous endpoints. Afterwards * write DMA address to HW and enable the endpoint. - * - * Switch between descriptor chains via isoc_chain_num to give SW opportunity - * to prepare second descriptor chain while first one is being processed by HW. */ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) { @@ -887,24 +877,34 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) struct dwc2_hsotg_req *hs_req, *treq; int index = hs_ep->index; int ret; + int i; u32 dma_reg; u32 depctl; u32 ctrl; + struct dwc2_dma_desc *desc; if (list_empty(&hs_ep->queue)) { dev_dbg(hsotg->dev, "%s: No requests in queue\n", __func__); return; } + /* Initialize descriptor chain by Host Busy status */ + for (i = 0; i < MAX_DMA_DESC_NUM_GENERIC; i++) { + desc = &hs_ep->desc_list[i]; + desc->status = 0; + desc->status |= (DEV_DMA_BUFF_STS_HBUSY + << DEV_DMA_BUFF_STS_SHIFT); + } + + hs_ep->next_desc = 0; list_for_each_entry_safe(hs_req, treq, &hs_ep->queue, queue) { ret = dwc2_gadget_fill_isoc_desc(hs_ep, hs_req->req.dma, hs_req->req.length); - if (ret) { - dev_dbg(hsotg->dev, "%s: desc chain full\n", __func__); + if (ret) break; - } } + hs_ep->compl_desc = 0; depctl = hs_ep->dir_in ? DIEPCTL(index) : DOEPCTL(index); dma_reg = hs_ep->dir_in ? DIEPDMA(index) : DOEPDMA(index); @@ -914,10 +914,6 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) ctrl = dwc2_readl(hsotg->regs + depctl); ctrl |= DXEPCTL_EPENA | DXEPCTL_CNAK; dwc2_writel(ctrl, hsotg->regs + depctl); - - /* Switch ISOC descriptor chain number being processed by SW*/ - hs_ep->isoc_chain_num = (hs_ep->isoc_chain_num ^ 1) & 0x1; - hs_ep->next_desc = 0; } /** @@ -1235,7 +1231,7 @@ static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; u32 target_frame = hs_ep->target_frame; - u32 current_frame = dwc2_hsotg_read_frameno(hsotg); + u32 current_frame = hsotg->frame_number; bool frame_overrun = hs_ep->frame_overrun; if (!frame_overrun && current_frame >= target_frame) @@ -1291,6 +1287,9 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, struct dwc2_hsotg *hs = hs_ep->parent; bool first; int ret; + u32 maxsize = 0; + u32 mask = 0; + dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n", ep->name, req, req->length, req->buf, req->no_interrupt, @@ -1308,6 +1307,24 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, req->actual = 0; req->status = -EINPROGRESS; + /* In DDMA mode for ISOC's don't queue request if length greater + * than descriptor limits. + */ + if (using_desc_dma(hs) && hs_ep->isochronous) { + maxsize = dwc2_gadget_get_desc_params(hs_ep, &mask); + if (hs_ep->dir_in && req->length > maxsize) { + dev_err(hs->dev, "wrong length %d (maxsize=%d)\n", + req->length, maxsize); + return -EINVAL; + } + + if (!hs_ep->dir_in && req->length > hs_ep->ep.maxpacket) { + dev_err(hs->dev, "ISOC OUT: wrong length %d (mps=%d)\n", + req->length, hs_ep->ep.maxpacket); + return -EINVAL; + } + } + ret = dwc2_hsotg_handle_unaligned_buf_start(hs, hs_ep, hs_req); if (ret) return ret; @@ -1330,17 +1347,15 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, /* * Handle DDMA isochronous transfers separately - just add new entry - * to the half of descriptor chain that is not processed by HW. + * to the descriptor chain. * Transfer will be started once SW gets either one of NAK or * OutTknEpDis interrupts. */ - if (using_desc_dma(hs) && hs_ep->isochronous && - hs_ep->target_frame != TARGET_FRAME_INITIAL) { - ret = dwc2_gadget_fill_isoc_desc(hs_ep, hs_req->req.dma, - hs_req->req.length); - if (ret) - dev_dbg(hs->dev, "%s: ISO desc chain full\n", __func__); - + if (using_desc_dma(hs) && hs_ep->isochronous) { + if (hs_ep->target_frame != TARGET_FRAME_INITIAL) { + dwc2_gadget_fill_isoc_desc(hs_ep, hs_req->req.dma, + hs_req->req.length); + } return 0; } @@ -1350,8 +1365,15 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, return 0; } - while (dwc2_gadget_target_frame_elapsed(hs_ep)) + /* Update current frame number value. */ + hs->frame_number = dwc2_hsotg_read_frameno(hs); + while (dwc2_gadget_target_frame_elapsed(hs_ep)) { dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value once more as it + * changes here. + */ + hs->frame_number = dwc2_hsotg_read_frameno(hs); + } if (hs_ep->target_frame != TARGET_FRAME_INITIAL) dwc2_hsotg_start_req(hs, hs_ep, hs_req, false); @@ -2011,108 +2033,75 @@ static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg, * @hs_ep: The endpoint the request was on. * * Get first request from the ep queue, determine descriptor on which complete - * happened. SW based on isoc_chain_num discovers which half of the descriptor - * chain is currently in use by HW, adjusts dma_address and calculates index - * of completed descriptor based on the value of DEPDMA register. Update actual - * length of request, giveback to gadget. + * happened. SW discovers which descriptor currently in use by HW, adjusts + * dma_address and calculates index of completed descriptor based on the value + * of DEPDMA register. Update actual length of request, giveback to gadget. */ static void dwc2_gadget_complete_isoc_request_ddma(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; struct dwc2_hsotg_req *hs_req; struct usb_request *ureq; - int index; - dma_addr_t dma_addr; - u32 dma_reg; - u32 depdma; u32 desc_sts; u32 mask; - hs_req = get_ep_head(hs_ep); - if (!hs_req) { - dev_warn(hsotg->dev, "%s: ISOC EP queue empty\n", __func__); - return; - } - ureq = &hs_req->req; - - dma_addr = hs_ep->desc_list_dma; - - /* - * If lower half of descriptor chain is currently use by SW, - * that means higher half is being processed by HW, so shift - * DMA address to higher half of descriptor chain. - */ - if (!hs_ep->isoc_chain_num) - dma_addr += sizeof(struct dwc2_dma_desc) * - (MAX_DMA_DESC_NUM_GENERIC / 2); - - dma_reg = hs_ep->dir_in ? DIEPDMA(hs_ep->index) : DOEPDMA(hs_ep->index); - depdma = dwc2_readl(hsotg->regs + dma_reg); + desc_sts = hs_ep->desc_list[hs_ep->compl_desc].status; - index = (depdma - dma_addr) / sizeof(struct dwc2_dma_desc) - 1; - desc_sts = hs_ep->desc_list[index].status; + /* Process only descriptors with buffer status set to DMA done */ + while ((desc_sts & DEV_DMA_BUFF_STS_MASK) >> + DEV_DMA_BUFF_STS_SHIFT == DEV_DMA_BUFF_STS_DMADONE) { - mask = hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_MASK : - DEV_DMA_ISOC_RX_NBYTES_MASK; - ureq->actual = ureq->length - - ((desc_sts & mask) >> DEV_DMA_ISOC_NBYTES_SHIFT); + hs_req = get_ep_head(hs_ep); + if (!hs_req) { + dev_warn(hsotg->dev, "%s: ISOC EP queue empty\n", __func__); + return; + } + ureq = &hs_req->req; + + /* Check completion status */ + if ((desc_sts & DEV_DMA_STS_MASK) >> DEV_DMA_STS_SHIFT == + DEV_DMA_STS_SUCC) { + mask = hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_MASK : + DEV_DMA_ISOC_RX_NBYTES_MASK; + ureq->actual = ureq->length - ((desc_sts & mask) >> + DEV_DMA_ISOC_NBYTES_SHIFT); + + /* Adjust actual len for ISOC Out if len is + * not align of 4 + */ + if (!hs_ep->dir_in && ureq->length & 0x3) + ureq->actual += 4 - (ureq->length & 0x3); + } - /* Adjust actual length for ISOC Out if length is not align of 4 */ - if (!hs_ep->dir_in && ureq->length & 0x3) - ureq->actual += 4 - (ureq->length & 0x3); + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); - dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); + hs_ep->compl_desc++; + if (hs_ep->compl_desc > (MAX_DMA_DESC_NUM_GENERIC - 1)) + hs_ep->compl_desc = 0; + desc_sts = hs_ep->desc_list[hs_ep->compl_desc].status; + } } /* - * dwc2_gadget_start_next_isoc_ddma - start next isoc request, if any. - * @hs_ep: The isochronous endpoint to be re-enabled. + * dwc2_gadget_handle_isoc_bna - handle BNA interrupt for ISOC. + * @hs_ep: The isochronous endpoint. * - * If ep has been disabled due to last descriptor servicing (IN endpoint) or - * BNA (OUT endpoint) check the status of other half of descriptor chain that - * was under SW control till HW was busy and restart the endpoint if needed. + * If EP ISOC OUT then need to flush RX FIFO to remove source of BNA + * interrupt. Reset target frame and next_desc to allow to start + * ISOC's on NAK interrupt for IN direction or on OUTTKNEPDIS + * interrupt for OUT direction. */ -static void dwc2_gadget_start_next_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) +static void dwc2_gadget_handle_isoc_bna(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; - u32 depctl; - u32 dma_reg; - u32 ctrl; - u32 dma_addr = hs_ep->desc_list_dma; - unsigned char index = hs_ep->index; - - dma_reg = hs_ep->dir_in ? DIEPDMA(index) : DOEPDMA(index); - depctl = hs_ep->dir_in ? DIEPCTL(index) : DOEPCTL(index); - ctrl = dwc2_readl(hsotg->regs + depctl); - - /* - * EP was disabled if HW has processed last descriptor or BNA was set. - * So restart ep if SW has prepared new descriptor chain in ep_queue - * routine while HW was busy. - */ - if (!(ctrl & DXEPCTL_EPENA)) { - if (!hs_ep->next_desc) { - dev_dbg(hsotg->dev, "%s: No more ISOC requests\n", - __func__); - return; - } - - dma_addr += sizeof(struct dwc2_dma_desc) * - (MAX_DMA_DESC_NUM_GENERIC / 2) * - hs_ep->isoc_chain_num; - dwc2_writel(dma_addr, hsotg->regs + dma_reg); - - ctrl |= DXEPCTL_EPENA | DXEPCTL_CNAK; - dwc2_writel(ctrl, hsotg->regs + depctl); + if (!hs_ep->dir_in) + dwc2_flush_rx_fifo(hsotg); + dwc2_hsotg_complete_request(hsotg, hs_ep, get_ep_head(hs_ep), 0); - /* Switch ISOC descriptor chain number being processed by SW*/ - hs_ep->isoc_chain_num = (hs_ep->isoc_chain_num ^ 1) & 0x1; - hs_ep->next_desc = 0; - - dev_dbg(hsotg->dev, "%s: Restarted isochronous endpoint\n", - __func__); - } + hs_ep->target_frame = TARGET_FRAME_INITIAL; + hs_ep->next_desc = 0; + hs_ep->compl_desc = 0; } /** @@ -2441,6 +2430,7 @@ static u32 dwc2_hsotg_ep0_mps(unsigned int mps) * @ep: The index number of the endpoint * @mps: The maximum packet size in bytes * @mc: The multicount value + * @dir_in: True if direction is in. * * Configure the maximum packet size for the given endpoint, updating * the hardware control registers to reflect this. @@ -2731,6 +2721,8 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); } while (dwc2_gadget_target_frame_elapsed(hs_ep)); dwc2_gadget_start_next_request(hs_ep); @@ -2738,7 +2730,7 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) /** * dwc2_gadget_handle_out_token_ep_disabled - handle DXEPINT_OUTTKNEPDIS - * @hs_ep: The endpoint on which interrupt is asserted. + * @ep: The endpoint on which interrupt is asserted. * * This is starting point for ISOC-OUT transfer, synchronization done with * first out token received from host while corresponding EP is disabled. @@ -2763,7 +2755,7 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) */ tmp = dwc2_hsotg_read_frameno(hsotg); - dwc2_hsotg_complete_request(hsotg, ep, get_ep_head(ep), -ENODATA); + dwc2_hsotg_complete_request(hsotg, ep, get_ep_head(ep), 0); if (using_desc_dma(hsotg)) { if (ep->target_frame == TARGET_FRAME_INITIAL) { @@ -2816,18 +2808,25 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; int dir_in = hs_ep->dir_in; + u32 tmp; if (!dir_in || !hs_ep->isochronous) return; if (hs_ep->target_frame == TARGET_FRAME_INITIAL) { - hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg); + tmp = dwc2_hsotg_read_frameno(hsotg); if (using_desc_dma(hsotg)) { + dwc2_hsotg_complete_request(hsotg, hs_ep, + get_ep_head(hs_ep), 0); + + hs_ep->target_frame = tmp; + dwc2_gadget_incr_frame_num(hs_ep); dwc2_gadget_start_isoc_ddma(hs_ep); return; } + hs_ep->target_frame = tmp; if (hs_ep->interval > 1) { u32 ctrl = dwc2_readl(hsotg->regs + DIEPCTL(hs_ep->index)); @@ -2843,7 +2842,8 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) get_ep_head(hs_ep), 0); } - dwc2_gadget_incr_frame_num(hs_ep); + if (!using_desc_dma(hsotg)) + dwc2_gadget_incr_frame_num(hs_ep); } /** @@ -2901,9 +2901,9 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, /* In DDMA handle isochronous requests separately */ if (using_desc_dma(hsotg) && hs_ep->isochronous) { - dwc2_gadget_complete_isoc_request_ddma(hs_ep); - /* Try to start next isoc request */ - dwc2_gadget_start_next_isoc_ddma(hs_ep); + /* XferCompl set along with BNA */ + if (!(ints & DXEPINT_BNAINTR)) + dwc2_gadget_complete_isoc_request_ddma(hs_ep); } else if (dir_in) { /* * We get OutDone from the FIFO, so we only @@ -2978,15 +2978,8 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, if (ints & DXEPINT_BNAINTR) { dev_dbg(hsotg->dev, "%s: BNA interrupt\n", __func__); - - /* - * Try to start next isoc request, if any. - * Sometimes the endpoint remains enabled after BNA interrupt - * assertion, which is not expected, hence we can enter here - * couple of times. - */ if (hs_ep->isochronous) - dwc2_gadget_start_next_isoc_ddma(hs_ep); + dwc2_gadget_handle_isoc_bna(hs_ep); } if (dir_in && !hs_ep->isochronous) { @@ -3197,6 +3190,7 @@ static void dwc2_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic) /** * dwc2_hsotg_core_init - issue softreset to the core * @hsotg: The device state + * @is_usb_reset: Usb resetting flag * * Issue a soft reset to the core, and await the core finishing it. */ @@ -3259,6 +3253,9 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, dcfg |= DCFG_DEVSPD_HS; } + if (hsotg->params.ipg_isoc_en) + dcfg |= DCFG_IPG_ISOC_SUPPORDED; + dwc2_writel(dcfg, hsotg->regs + DCFG); /* Clear any pending OTG interrupts */ @@ -3320,8 +3317,10 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, hsotg->regs + DOEPMSK); /* Enable BNA interrupt for DDMA */ - if (using_desc_dma(hsotg)) + if (using_desc_dma(hsotg)) { dwc2_set_bit(hsotg->regs + DOEPMSK, DOEPMSK_BNAMSK); + dwc2_set_bit(hsotg->regs + DIEPMSK, DIEPMSK_BNAININTRMSK); + } dwc2_writel(0, hsotg->regs + DAINTMSK); @@ -3427,7 +3426,7 @@ static void dwc2_gadget_handle_incomplete_isoc_in(struct dwc2_hsotg *hsotg) daintmsk = dwc2_readl(hsotg->regs + DAINTMSK); - for (idx = 1; idx <= hsotg->num_of_eps; idx++) { + for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_in[idx]; /* Proceed only unmasked ISOC EPs */ if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk)) @@ -3473,7 +3472,7 @@ static void dwc2_gadget_handle_incomplete_isoc_out(struct dwc2_hsotg *hsotg) daintmsk = dwc2_readl(hsotg->regs + DAINTMSK); daintmsk >>= DAINT_OUTEP_SHIFT; - for (idx = 1; idx <= hsotg->num_of_eps; idx++) { + for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_out[idx]; /* Proceed only unmasked ISOC EPs */ if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk)) @@ -3647,7 +3646,7 @@ irq_retry: dwc2_writel(gintmsk, hsotg->regs + GINTMSK); dev_dbg(hsotg->dev, "GOUTNakEff triggered\n"); - for (idx = 1; idx <= hsotg->num_of_eps; idx++) { + for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_out[idx]; /* Proceed only unmasked ISOC EPs */ if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk)) @@ -3789,6 +3788,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, unsigned int dir_in; unsigned int i, val, size; int ret = 0; + unsigned char ep_type; dev_dbg(hsotg->dev, "%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n", @@ -3807,9 +3807,26 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, return -EINVAL; } + ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; mps = usb_endpoint_maxp(desc); mc = usb_endpoint_maxp_mult(desc); + /* ISOC IN in DDMA supported bInterval up to 10 */ + if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC && + dir_in && desc->bInterval > 10) { + dev_err(hsotg->dev, + "%s: ISOC IN, DDMA: bInterval>10 not supported!\n", __func__); + return -EINVAL; + } + + /* High bandwidth ISOC OUT in DDMA not supported */ + if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC && + !dir_in && mc > 1) { + dev_err(hsotg->dev, + "%s: ISOC OUT, DDMA: HB not supported!\n", __func__); + return -EINVAL; + } + /* note, we handle this here instead of dwc2_hsotg_set_ep_maxpacket */ epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); @@ -3850,15 +3867,15 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, hs_ep->halted = 0; hs_ep->interval = desc->bInterval; - switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + switch (ep_type) { case USB_ENDPOINT_XFER_ISOC: epctrl |= DXEPCTL_EPTYPE_ISO; epctrl |= DXEPCTL_SETEVENFR; hs_ep->isochronous = 1; hs_ep->interval = 1 << (desc->bInterval - 1); hs_ep->target_frame = TARGET_FRAME_INITIAL; - hs_ep->isoc_chain_num = 0; hs_ep->next_desc = 0; + hs_ep->compl_desc = 0; if (dir_in) { hs_ep->periodic = 1; mask = dwc2_readl(hsotg->regs + DIEPMSK); @@ -4301,7 +4318,6 @@ err: /** * dwc2_hsotg_udc_stop - stop the udc * @gadget: The usb gadget state - * @driver: The usb gadget driver * * Stop udc hw block and stay tunned for future transmissions */ @@ -4453,6 +4469,7 @@ static const struct usb_gadget_ops dwc2_hsotg_gadget_ops = { * @hsotg: The device state. * @hs_ep: The endpoint to be initialised. * @epnum: The endpoint number + * @dir_in: True if direction is in. * * Initialise the given endpoint (as part of the probe and device state * creation) to give to the gadget driver. Setup the endpoint name, any @@ -4526,7 +4543,7 @@ static void dwc2_hsotg_initep(struct dwc2_hsotg *hsotg, /** * dwc2_hsotg_hw_cfg - read HW configuration registers - * @param: The device state + * @hsotg: Programming view of the DWC_otg controller * * Read the USB core HW configuration registers */ @@ -4582,7 +4599,8 @@ static int dwc2_hsotg_hw_cfg(struct dwc2_hsotg *hsotg) /** * dwc2_hsotg_dump - dump state of the udc - * @param: The device state + * @hsotg: Programming view of the DWC_otg controller + * */ static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg) { @@ -4633,7 +4651,8 @@ static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg) /** * dwc2_gadget_init - init function for gadget - * @dwc2: The data structure for the DWC2 driver. + * @hsotg: Programming view of the DWC_otg controller + * */ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) { @@ -4730,7 +4749,8 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) /** * dwc2_hsotg_remove - remove function for hsotg driver - * @pdev: The platform information for the driver + * @hsotg: Programming view of the DWC_otg controller + * */ int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg) { @@ -5011,7 +5031,7 @@ int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg) * * @hsotg: Programming view of the DWC_otg controller * @rem_wakeup: indicates whether resume is initiated by Device or Host. - * @param reset: indicates whether resume is initiated by Reset. + * @reset: indicates whether resume is initiated by Reset. * * Return non-zero if failed to exit from hibernation. */ diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index c51b73b3e048..1faefea16cec 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -597,7 +597,7 @@ u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg) * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination * buffer * - * @core_if: Programming view of DWC_otg controller + * @hsotg: Programming view of DWC_otg controller * @dest: Destination buffer for the packet * @bytes: Number of bytes to copy to the destination */ @@ -4087,7 +4087,6 @@ static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd) * then the refcount for the structure will go to 0 and we'll free it. * * @hsotg: The HCD state structure for the DWC OTG controller. - * @qh: The QH structure. * @context: The priv pointer from a struct dwc2_hcd_urb. * @mem_flags: Flags for allocating memory. * @ttport: We'll return this device's port number here. That's used to diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index 96a9da5fb202..7db1ee7e7a77 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -80,7 +80,7 @@ struct dwc2_qh; * @xfer_count: Number of bytes transferred so far * @start_pkt_count: Packet count at start of transfer * @xfer_started: True if the transfer has been started - * @ping: True if a PING request should be issued on this channel + * @do_ping: True if a PING request should be issued on this channel * @error_state: True if the error count for this transaction is non-zero * @halt_on_queue: True if this channel should be halted the next time a * request is queued for the channel. This is necessary in @@ -102,7 +102,7 @@ struct dwc2_qh; * @schinfo: Scheduling micro-frame bitmap * @ntd: Number of transfer descriptors for the transfer * @halt_status: Reason for halting the host channel - * @hcint Contents of the HCINT register when the interrupt came + * @hcint: Contents of the HCINT register when the interrupt came * @qh: QH for the transfer being processed by this channel * @hc_list_entry: For linking to list of host channels * @desc_list_addr: Current QH's descriptor list DMA address @@ -237,7 +237,7 @@ struct dwc2_tt { /** * struct dwc2_hs_transfer_time - Info about a transfer on the high speed bus. * - * @start_schedule_usecs: The start time on the main bus schedule. Note that + * @start_schedule_us: The start time on the main bus schedule. Note that * the main bus schedule is tightly packed and this * time should be interpreted as tightly packed (so * uFrame 0 starts at 0 us, uFrame 1 starts at 100 us @@ -301,7 +301,6 @@ struct dwc2_hs_transfer_time { * "struct dwc2_tt". Not used if this device is high * speed. Note that this is in "schedule slice" which * is tightly packed. - * @ls_duration_us: Duration on the low speed bus schedule. * @ntd: Actual number of transfer descriptors in a list * @qtd_list: List of QTDs for this QH * @channel: Host channel currently processing transfers for this QH @@ -315,7 +314,7 @@ struct dwc2_hs_transfer_time { * descriptor * @unreserve_timer: Timer for releasing periodic reservation. * @wait_timer: Timer used to wait before re-queuing. - * @dwc2_tt: Pointer to our tt info (or NULL if no tt). + * @dwc_tt: Pointer to our tt info (or NULL if no tt). * @ttport: Port number within our tt. * @tt_buffer_dirty True if clear_tt_buffer_complete is pending * @unreserve_pending: True if we planned to unreserve but haven't yet. @@ -325,6 +324,7 @@ struct dwc2_hs_transfer_time { * periodic transfers and is ignored for periodic ones. * @wait_timer_cancel: Set to true to cancel the wait_timer. * + * @tt_buffer_dirty: True if EP's TT buffer is not clean. * A Queue Head (QH) holds the static characteristics of an endpoint and * maintains a list of transfers (QTDs) for that endpoint. A QH structure may * be entered in either the non-periodic or periodic schedule. @@ -400,6 +400,10 @@ struct dwc2_qh { * @urb: URB for this transfer * @qh: Queue head for this QTD * @qtd_list_entry: For linking to the QH's list of QTDs + * @isoc_td_first: Index of first activated isochronous transfer + * descriptor in Descriptor DMA mode + * @isoc_td_last: Index of last activated isochronous transfer + * descriptor in Descriptor DMA mode * * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, * interrupt, or isochronous transfer. A single QTD is created for each URB diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c index 28c8898b3b66..74f11c823f79 100644 --- a/drivers/usb/dwc2/hcd_ddma.c +++ b/drivers/usb/dwc2/hcd_ddma.c @@ -332,6 +332,7 @@ static void dwc2_release_channel_ddma(struct dwc2_hsotg *hsotg, * * @hsotg: The HCD state structure for the DWC OTG controller * @qh: The QH to init + * @mem_flags: Indicates the type of memory allocation * * Return: 0 if successful, negative error code otherwise * diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index a5dfd9d8bd9a..fbea5e3fb947 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -478,6 +478,12 @@ static u32 dwc2_get_actual_xfer_length(struct dwc2_hsotg *hsotg, * of the URB based on the number of bytes transferred via the host channel. * Sets the URB status if the data transfer is finished. * + * @hsotg: Programming view of the DWC_otg controller + * @chan: Programming view of host channel + * @chnum: Channel number + * @urb: Processing URB + * @qtd: Queue transfer descriptor + * * Return: 1 if the data transfer specified by the URB is completely finished, * 0 otherwise */ @@ -566,6 +572,12 @@ void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg, * halt_status. Completes the Isochronous URB if all the URB frames have been * completed. * + * @hsotg: Programming view of the DWC_otg controller + * @chan: Programming view of host channel + * @chnum: Channel number + * @halt_status: Reason for halting a host channel + * @qtd: Queue transfer descriptor + * * Return: DWC2_HC_XFER_COMPLETE if there are more frames remaining to be * transferred in the URB. Otherwise return DWC2_HC_XFER_URB_COMPLETE. */ diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index e34ad5e65350..d7c3d6c776d8 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -679,6 +679,7 @@ static int dwc2_hs_pmap_schedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, * * @hsotg: The HCD state structure for the DWC OTG controller. * @qh: QH for the periodic transfer. + * @index: Transfer index */ static void dwc2_hs_pmap_unschedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, int index) @@ -1276,7 +1277,7 @@ static void dwc2_do_unreserve(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) * release the reservation. This worker is called after the appropriate * delay. * - * @work: Pointer to a qh unreserve_work. + * @t: Address to a qh unreserve_work. */ static void dwc2_unreserve_timer_fn(struct timer_list *t) { @@ -1631,7 +1632,7 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, * @hsotg: The HCD state structure for the DWC OTG controller * @urb: Holds the information about the device/endpoint needed * to initialize the QH - * @atomic_alloc: Flag to do atomic allocation if needed + * @mem_flags: Flags for allocating memory. * * Return: Pointer to the newly allocated QH, or NULL on error */ diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index 38391e48351f..0ca8e7bc7aaf 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -311,6 +311,7 @@ #define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14) #define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT 14 #define GHWCFG4_ACG_SUPPORTED BIT(12) +#define GHWCFG4_IPG_ISOC_SUPPORTED BIT(11) #define GHWCFG4_UTMI_PHY_DATA_WIDTH_8 0 #define GHWCFG4_UTMI_PHY_DATA_WIDTH_16 1 #define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16 2 @@ -424,6 +425,7 @@ #define DCFG_EPMISCNT_SHIFT 18 #define DCFG_EPMISCNT_LIMIT 0x1f #define DCFG_EPMISCNT(_x) ((_x) << 18) +#define DCFG_IPG_ISOC_SUPPORDED BIT(17) #define DCFG_PERFRINT_MASK (0x3 << 11) #define DCFG_PERFRINT_SHIFT 11 #define DCFG_PERFRINT_LIMIT 0x3 diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index f03e41879224..af075d4da895 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -70,6 +70,7 @@ static void dwc2_set_his_params(struct dwc2_hsotg *hsotg) GAHBCFG_HBSTLEN_SHIFT; p->uframe_sched = false; p->change_speed_quirk = true; + p->power_down = false; } static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) @@ -269,6 +270,9 @@ static void dwc2_set_param_power_down(struct dwc2_hsotg *hsotg) /** * dwc2_set_default_params() - Set all core parameters to their * auto-detected default values. + * + * @hsotg: Programming view of the DWC_otg controller + * */ static void dwc2_set_default_params(struct dwc2_hsotg *hsotg) { @@ -298,6 +302,7 @@ static void dwc2_set_default_params(struct dwc2_hsotg *hsotg) p->besl = true; p->hird_threshold_en = true; p->hird_threshold = 4; + p->ipg_isoc_en = false; p->max_packet_count = hw->max_packet_count; p->max_transfer_size = hw->max_transfer_size; p->ahbcfg = GAHBCFG_HBSTLEN_INCR << GAHBCFG_HBSTLEN_SHIFT; @@ -338,6 +343,8 @@ static void dwc2_set_default_params(struct dwc2_hsotg *hsotg) /** * dwc2_get_device_properties() - Read in device properties. * + * @hsotg: Programming view of the DWC_otg controller + * * Read in the device properties and adjust core parameters if needed. */ static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg) @@ -549,7 +556,7 @@ static void dwc2_check_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg) } #define CHECK_RANGE(_param, _min, _max, _def) do { \ - if ((hsotg->params._param) < (_min) || \ + if ((int)(hsotg->params._param) < (_min) || \ (hsotg->params._param) > (_max)) { \ dev_warn(hsotg->dev, "%s: Invalid parameter %s=%d\n", \ __func__, #_param, hsotg->params._param); \ @@ -579,6 +586,7 @@ static void dwc2_check_params(struct dwc2_hsotg *hsotg) CHECK_BOOL(enable_dynamic_fifo, hw->enable_dynamic_fifo); CHECK_BOOL(en_multiple_tx_fifo, hw->en_multiple_tx_fifo); CHECK_BOOL(i2c_enable, hw->i2c_enable); + CHECK_BOOL(ipg_isoc_en, hw->ipg_isoc_en); CHECK_BOOL(acg_enable, hw->acg_enable); CHECK_BOOL(reload_ctl, (hsotg->hw_params.snpsid > DWC2_CORE_REV_2_92a)); CHECK_BOOL(lpm, (hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_80a)); @@ -688,6 +696,9 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) /** * During device initialization, read various hardware configuration * registers and interpret the contents. + * + * @hsotg: Programming view of the DWC_otg controller + * */ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) { @@ -772,6 +783,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) hw->utmi_phy_data_width = (hwcfg4 & GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK) >> GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT; hw->acg_enable = !!(hwcfg4 & GHWCFG4_ACG_SUPPORTED); + hw->ipg_isoc_en = !!(hwcfg4 & GHWCFG4_IPG_ISOC_SUPPORTED); /* fifo sizes */ hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >> diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c index bea2e8ec0369..d257c541e51b 100644 --- a/drivers/usb/dwc2/pci.c +++ b/drivers/usb/dwc2/pci.c @@ -77,6 +77,12 @@ static int dwc2_pci_quirks(struct pci_dev *pdev, struct platform_device *dwc2) return 0; } +/** + * dwc2_pci_probe() - Provides the cleanup entry points for the DWC_otg PCI + * driver + * + * @pci: The programming view of DWC_otg PCI + */ static void dwc2_pci_remove(struct pci_dev *pci) { struct dwc2_pci_glue *glue = pci_get_drvdata(pci); diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index ab8c0e0d3b60..451012ea1294 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -106,4 +106,16 @@ config USB_DWC3_ST inside (i.e. STiH407). Say 'Y' or 'M' if you have one such device. +config USB_DWC3_QCOM + tristate "Qualcomm Platform" + depends on ARCH_QCOM || COMPILE_TEST + depends on OF + default USB_DWC3 + help + Some Qualcomm SoCs use DesignWare Core IP for USB2/3 + functionality. + This driver also handles Qscratch wrapper which is needed + for peripheral mode support. + Say 'Y' or 'M' if you have one such device. + endif diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index 025bc68094fc..5c07d8f925e0 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -48,3 +48,4 @@ obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o obj-$(CONFIG_USB_DWC3_KEYSTONE) += dwc3-keystone.o obj-$(CONFIG_USB_DWC3_OF_SIMPLE) += dwc3-of-simple.o obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o +obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index a15648d25e30..ea91310113b9 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -8,6 +8,7 @@ * Sebastian Andrzej Siewior <bigeasy@linutronix.de> */ +#include <linux/clk.h> #include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> @@ -24,6 +25,7 @@ #include <linux/of.h> #include <linux/acpi.h> #include <linux/pinctrl/consumer.h> +#include <linux/reset.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -266,6 +268,12 @@ done: return 0; } +static const struct clk_bulk_data dwc3_core_clks[] = { + { .id = "ref" }, + { .id = "bus_early" }, + { .id = "suspend" }, +}; + /* * dwc3_frame_length_adjustment - Adjusts frame length if required * @dwc3: Pointer to our controller context structure @@ -667,6 +675,9 @@ static void dwc3_core_exit(struct dwc3 *dwc) usb_phy_set_suspend(dwc->usb3_phy, 1); phy_power_off(dwc->usb2_generic_phy); phy_power_off(dwc->usb3_generic_phy); + clk_bulk_disable(dwc->num_clks, dwc->clks); + clk_bulk_unprepare(dwc->num_clks, dwc->clks); + reset_control_assert(dwc->reset); } static bool dwc3_core_is_valid(struct dwc3 *dwc) @@ -1245,7 +1256,7 @@ static void dwc3_check_params(struct dwc3 *dwc) static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *res; + struct resource *res, dwc_res; struct dwc3 *dwc; int ret; @@ -1256,6 +1267,12 @@ static int dwc3_probe(struct platform_device *pdev) if (!dwc) return -ENOMEM; + dwc->clks = devm_kmemdup(dev, dwc3_core_clks, sizeof(dwc3_core_clks), + GFP_KERNEL); + if (!dwc->clks) + return -ENOMEM; + + dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); dwc->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1270,23 +1287,48 @@ static int dwc3_probe(struct platform_device *pdev) dwc->xhci_resources[0].flags = res->flags; dwc->xhci_resources[0].name = res->name; - res->start += DWC3_GLOBALS_REGS_START; - /* * Request memory region but exclude xHCI regs, * since it will be requested by the xhci-plat driver. */ - regs = devm_ioremap_resource(dev, res); - if (IS_ERR(regs)) { - ret = PTR_ERR(regs); - goto err0; - } + dwc_res = *res; + dwc_res.start += DWC3_GLOBALS_REGS_START; + + regs = devm_ioremap_resource(dev, &dwc_res); + if (IS_ERR(regs)) + return PTR_ERR(regs); dwc->regs = regs; - dwc->regs_size = resource_size(res); + dwc->regs_size = resource_size(&dwc_res); dwc3_get_properties(dwc); + dwc->reset = devm_reset_control_get_optional_shared(dev, NULL); + if (IS_ERR(dwc->reset)) + return PTR_ERR(dwc->reset); + + ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); + if (ret == -EPROBE_DEFER) + return ret; + /* + * Clocks are optional, but new DT platforms should support all clocks + * as required by the DT-binding. + */ + if (ret) + dwc->num_clks = 0; + + ret = reset_control_deassert(dwc->reset); + if (ret) + goto put_clks; + + ret = clk_bulk_prepare(dwc->num_clks, dwc->clks); + if (ret) + goto assert_reset; + + ret = clk_bulk_enable(dwc->num_clks, dwc->clks); + if (ret) + goto unprepare_clks; + platform_set_drvdata(pdev, dwc); dwc3_cache_hwparams(dwc); @@ -1350,13 +1392,13 @@ err1: pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); -err0: - /* - * restore res->start back to its original value so that, in case the - * probe is deferred, we don't end up getting error in request the - * memory region the next time probe is called. - */ - res->start -= DWC3_GLOBALS_REGS_START; + clk_bulk_disable(dwc->num_clks, dwc->clks); +unprepare_clks: + clk_bulk_unprepare(dwc->num_clks, dwc->clks); +assert_reset: + reset_control_assert(dwc->reset); +put_clks: + clk_bulk_put(dwc->num_clks, dwc->clks); return ret; } @@ -1364,15 +1406,8 @@ err0: static int dwc3_remove(struct platform_device *pdev) { struct dwc3 *dwc = platform_get_drvdata(pdev); - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); pm_runtime_get_sync(&pdev->dev); - /* - * restore res->start back to its original value so that, in case the - * probe is deferred, we don't end up getting error in request the - * memory region the next time probe is called. - */ - res->start -= DWC3_GLOBALS_REGS_START; dwc3_debugfs_exit(dwc); dwc3_core_exit_mode(dwc); @@ -1386,14 +1421,48 @@ static int dwc3_remove(struct platform_device *pdev) dwc3_free_event_buffers(dwc); dwc3_free_scratch_buffers(dwc); + clk_bulk_put(dwc->num_clks, dwc->clks); return 0; } #ifdef CONFIG_PM +static int dwc3_core_init_for_resume(struct dwc3 *dwc) +{ + int ret; + + ret = reset_control_deassert(dwc->reset); + if (ret) + return ret; + + ret = clk_bulk_prepare(dwc->num_clks, dwc->clks); + if (ret) + goto assert_reset; + + ret = clk_bulk_enable(dwc->num_clks, dwc->clks); + if (ret) + goto unprepare_clks; + + ret = dwc3_core_init(dwc); + if (ret) + goto disable_clks; + + return 0; + +disable_clks: + clk_bulk_disable(dwc->num_clks, dwc->clks); +unprepare_clks: + clk_bulk_unprepare(dwc->num_clks, dwc->clks); +assert_reset: + reset_control_assert(dwc->reset); + + return ret; +} + static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; + u32 reg; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: @@ -1403,9 +1472,25 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) dwc3_core_exit(dwc); break; case DWC3_GCTL_PRTCAP_HOST: - /* do nothing during host runtime_suspend */ - if (!PMSG_IS_AUTO(msg)) + if (!PMSG_IS_AUTO(msg)) { dwc3_core_exit(dwc); + break; + } + + /* Let controller to suspend HSPHY before PHY driver suspends */ + if (dwc->dis_u2_susphy_quirk || + dwc->dis_enblslpm_quirk) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM | + DWC3_GUSB2PHYCFG_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + + /* Give some time for USB2 PHY to suspend */ + usleep_range(5000, 6000); + } + + phy_pm_runtime_put_sync(dwc->usb2_generic_phy); + phy_pm_runtime_put_sync(dwc->usb3_generic_phy); break; case DWC3_GCTL_PRTCAP_OTG: /* do nothing during runtime_suspend */ @@ -1433,10 +1518,11 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; int ret; + u32 reg; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: - ret = dwc3_core_init(dwc); + ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; @@ -1446,13 +1532,25 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) spin_unlock_irqrestore(&dwc->lock, flags); break; case DWC3_GCTL_PRTCAP_HOST: - /* nothing to do on host runtime_resume */ if (!PMSG_IS_AUTO(msg)) { - ret = dwc3_core_init(dwc); + ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); + break; } + /* Restore GUSB2PHYCFG bits that were modified in suspend */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + if (dwc->dis_u2_susphy_quirk) + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + + if (dwc->dis_enblslpm_quirk) + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + + phy_pm_runtime_get_sync(dwc->usb2_generic_phy); + phy_pm_runtime_get_sync(dwc->usb3_generic_phy); break; case DWC3_GCTL_PRTCAP_OTG: /* nothing to do on runtime_resume */ diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 4f3b43809917..285ce0ef3b91 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -639,8 +639,6 @@ struct dwc3_event_buffer { * @resource_index: Resource transfer index * @frame_number: set to the frame number we want this transfer to start (ISOC) * @interval: the interval on which the ISOC transfer is started - * @allocated_requests: number of requests allocated - * @queued_requests: number of requests queued for transfer * @name: a human readable name e.g. ep1out-bulk * @direction: true for TX, false for RX * @stream_capable: true when streams are enabled @@ -664,11 +662,9 @@ struct dwc3_ep { #define DWC3_EP_ENABLED BIT(0) #define DWC3_EP_STALL BIT(1) #define DWC3_EP_WEDGE BIT(2) -#define DWC3_EP_BUSY BIT(4) +#define DWC3_EP_TRANSFER_STARTED BIT(3) #define DWC3_EP_PENDING_REQUEST BIT(5) -#define DWC3_EP_MISSED_ISOC BIT(6) #define DWC3_EP_END_TRANSFER_PENDING BIT(7) -#define DWC3_EP_TRANSFER_STARTED BIT(8) /* This last one is specific to EP0 */ #define DWC3_EP0_DIR_IN BIT(31) @@ -688,8 +684,6 @@ struct dwc3_ep { u8 number; u8 type; u8 resource_index; - u32 allocated_requests; - u32 queued_requests; u32 frame_number; u32 interval; @@ -832,7 +826,9 @@ struct dwc3_hwparams { * @list: a list_head used for request queueing * @dep: struct dwc3_ep owning this request * @sg: pointer to first incomplete sg + * @start_sg: pointer to the sg which should be queued next * @num_pending_sgs: counter to pending sgs + * @num_queued_sgs: counter to the number of sgs which already got queued * @remaining: amount of data remaining * @epnum: endpoint number to which this request refers * @trb: pointer to struct dwc3_trb @@ -848,8 +844,10 @@ struct dwc3_request { struct list_head list; struct dwc3_ep *dep; struct scatterlist *sg; + struct scatterlist *start_sg; unsigned num_pending_sgs; + unsigned int num_queued_sgs; unsigned remaining; u8 epnum; struct dwc3_trb *trb; @@ -891,6 +889,9 @@ struct dwc3_scratchpad_array { * @eps: endpoint array * @gadget: device side representation of the peripheral controller * @gadget_driver: pointer to the gadget driver + * @clks: array of clocks + * @num_clks: number of clocks + * @reset: reset control * @regs: base address for our registers * @regs_size: address space size * @fladj: frame length adjustment @@ -1013,6 +1014,11 @@ struct dwc3 { struct usb_gadget gadget; struct usb_gadget_driver *gadget_driver; + struct clk_bulk_data *clks; + int num_clks; + + struct reset_control *reset; + struct usb_phy *usb2_phy; struct usb_phy *usb3_phy; @@ -1197,11 +1203,12 @@ struct dwc3_event_depevt { /* Within XferNotReady */ #define DEPEVT_STATUS_TRANSFER_ACTIVE BIT(3) -/* Within XferComplete */ +/* Within XferComplete or XferInProgress */ #define DEPEVT_STATUS_BUSERR BIT(0) #define DEPEVT_STATUS_SHORT BIT(1) #define DEPEVT_STATUS_IOC BIT(2) -#define DEPEVT_STATUS_LST BIT(3) +#define DEPEVT_STATUS_LST BIT(3) /* XferComplete */ +#define DEPEVT_STATUS_MISSED_ISOC BIT(3) /* XferInProgress */ /* Stream event only */ #define DEPEVT_STREAMEVT_FOUND 1 diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index bfb90c52d8fc..c66d216dcc30 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -475,21 +475,37 @@ dwc3_ep_event_string(char *str, const struct dwc3_event_depevt *event, if (ret < 0) return "UNKNOWN"; + status = event->status; + switch (event->endpoint_event) { case DWC3_DEPEVT_XFERCOMPLETE: - strcat(str, "Transfer Complete"); + len = strlen(str); + sprintf(str + len, "Transfer Complete (%c%c%c)", + status & DEPEVT_STATUS_SHORT ? 'S' : 's', + status & DEPEVT_STATUS_IOC ? 'I' : 'i', + status & DEPEVT_STATUS_LST ? 'L' : 'l'); + len = strlen(str); if (epnum <= 1) sprintf(str + len, " [%s]", dwc3_ep0_state_string(ep0state)); break; case DWC3_DEPEVT_XFERINPROGRESS: - strcat(str, "Transfer In-Progress"); + len = strlen(str); + + sprintf(str + len, "Transfer In Progress [%d] (%c%c%c)", + event->parameters, + status & DEPEVT_STATUS_SHORT ? 'S' : 's', + status & DEPEVT_STATUS_IOC ? 'I' : 'i', + status & DEPEVT_STATUS_LST ? 'M' : 'm'); break; case DWC3_DEPEVT_XFERNOTREADY: - strcat(str, "Transfer Not Ready"); - status = event->status & DEPEVT_STATUS_TRANSFER_ACTIVE; - strcat(str, status ? " (Active)" : " (Not Active)"); + len = strlen(str); + + sprintf(str + len, "Transfer Not Ready [%d]%s", + event->parameters, + status & DEPEVT_STATUS_TRANSFER_ACTIVE ? + " (Active)" : " (Not Active)"); /* Control Endpoints */ if (epnum <= 1) { diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index 2f07be1e1f31..df8e73ec3342 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -716,9 +716,6 @@ static void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep, struct dentry *dir; dir = debugfs_create_dir(dep->name, parent); - if (IS_ERR_OR_NULL(dir)) - return; - dwc3_debugfs_create_endpoint_files(dep, dir); } @@ -740,49 +737,31 @@ static void dwc3_debugfs_create_endpoint_dirs(struct dwc3 *dwc, void dwc3_debugfs_init(struct dwc3 *dwc) { struct dentry *root; - struct dentry *file; - - root = debugfs_create_dir(dev_name(dwc->dev), NULL); - if (IS_ERR_OR_NULL(root)) { - if (!root) - dev_err(dwc->dev, "Can't create debugfs root\n"); - return; - } - dwc->root = root; dwc->regset = kzalloc(sizeof(*dwc->regset), GFP_KERNEL); - if (!dwc->regset) { - debugfs_remove_recursive(root); + if (!dwc->regset) return; - } dwc->regset->regs = dwc3_regs; dwc->regset->nregs = ARRAY_SIZE(dwc3_regs); dwc->regset->base = dwc->regs - DWC3_GLOBALS_REGS_START; - file = debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset); - if (!file) - dev_dbg(dwc->dev, "Can't create debugfs regdump\n"); + root = debugfs_create_dir(dev_name(dwc->dev), NULL); + dwc->root = root; + + debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset); if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) { - file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, - dwc, &dwc3_mode_fops); - if (!file) - dev_dbg(dwc->dev, "Can't create debugfs mode\n"); + debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, dwc, + &dwc3_mode_fops); } if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) || IS_ENABLED(CONFIG_USB_DWC3_GADGET)) { - file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, - dwc, &dwc3_testmode_fops); - if (!file) - dev_dbg(dwc->dev, "Can't create debugfs testmode\n"); - - file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, - root, dwc, &dwc3_link_state_fops); - if (!file) - dev_dbg(dwc->dev, "Can't create debugfs link_state\n"); - + debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, dwc, + &dwc3_testmode_fops); + debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root, dwc, + &dwc3_link_state_fops); dwc3_debugfs_create_endpoint_dirs(dwc, root); } } diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 1d8c557e97e0..218371f985ca 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -8,6 +8,7 @@ */ #include <linux/extcon.h> +#include <linux/of_graph.h> #include <linux/platform_device.h> #include "debug.h" @@ -439,17 +440,38 @@ static int dwc3_drd_notifier(struct notifier_block *nb, return NOTIFY_DONE; } +static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) +{ + struct device *dev = dwc->dev; + struct device_node *np_phy, *np_conn; + struct extcon_dev *edev; + + if (of_property_read_bool(dev->of_node, "extcon")) + return extcon_get_edev_by_phandle(dwc->dev, 0); + + np_phy = of_parse_phandle(dev->of_node, "phys", 0); + np_conn = of_graph_get_remote_node(np_phy, -1, -1); + + if (np_conn) + edev = extcon_find_edev_by_node(np_conn); + else + edev = NULL; + + of_node_put(np_conn); + of_node_put(np_phy); + + return edev; +} + int dwc3_drd_init(struct dwc3 *dwc) { int ret, irq; - if (dwc->dev->of_node && - of_property_read_bool(dwc->dev->of_node, "extcon")) { - dwc->edev = extcon_get_edev_by_phandle(dwc->dev, 0); - - if (IS_ERR(dwc->edev)) - return PTR_ERR(dwc->edev); + dwc->edev = dwc3_get_extcon(dwc); + if (IS_ERR(dwc->edev)) + return PTR_ERR(dwc->edev); + if (dwc->edev) { dwc->edev_nb.notifier_call = dwc3_drd_notifier; ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST, &dwc->edev_nb); diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index cb2ee96fd3e8..6b3ccd542bd7 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -208,13 +208,13 @@ static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = { }; static const struct of_device_id of_dwc3_simple_match[] = { - { .compatible = "qcom,dwc3" }, { .compatible = "rockchip,rk3399-dwc3" }, { .compatible = "xlnx,zynqmp-dwc3" }, { .compatible = "cavium,octeon-7130-usb-uctl" }, { .compatible = "sprd,sc9860-dwc3" }, { .compatible = "amlogic,meson-axg-dwc3" }, { .compatible = "amlogic,meson-gxl-dwc3" }, + { .compatible = "allwinner,sun50i-h6-dwc3" }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, of_dwc3_simple_match); diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c new file mode 100644 index 000000000000..b0e67ab2f98c --- /dev/null +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -0,0 +1,619 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018, The Linux Foundation. All rights reserved. + * + * Inspired by dwc3-of-simple.c + */ + +#include <linux/io.h> +#include <linux/of.h> +#include <linux/clk.h> +#include <linux/irq.h> +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/extcon.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/usb/of.h> +#include <linux/reset.h> +#include <linux/iopoll.h> + +#include "core.h" + +/* USB QSCRATCH Hardware registers */ +#define QSCRATCH_HS_PHY_CTRL 0x10 +#define UTMI_OTG_VBUS_VALID BIT(20) +#define SW_SESSVLD_SEL BIT(28) + +#define QSCRATCH_SS_PHY_CTRL 0x30 +#define LANE0_PWR_PRESENT BIT(24) + +#define QSCRATCH_GENERAL_CFG 0x08 +#define PIPE_UTMI_CLK_SEL BIT(0) +#define PIPE3_PHYSTATUS_SW BIT(3) +#define PIPE_UTMI_CLK_DIS BIT(8) + +#define PWR_EVNT_IRQ_STAT_REG 0x58 +#define PWR_EVNT_LPM_IN_L2_MASK BIT(4) +#define PWR_EVNT_LPM_OUT_L2_MASK BIT(5) + +struct dwc3_qcom { + struct device *dev; + void __iomem *qscratch_base; + struct platform_device *dwc3; + struct clk **clks; + int num_clocks; + struct reset_control *resets; + + int hs_phy_irq; + int dp_hs_phy_irq; + int dm_hs_phy_irq; + int ss_phy_irq; + + struct extcon_dev *edev; + struct extcon_dev *host_edev; + struct notifier_block vbus_nb; + struct notifier_block host_nb; + + enum usb_dr_mode mode; + bool is_suspended; + bool pm_suspended; +}; + +static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg |= val; + writel(reg, base + offset); + + /* ensure that above write is through */ + readl(base + offset); +} + +static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~val; + writel(reg, base + offset); + + /* ensure that above write is through */ + readl(base + offset); +} + +static void dwc3_qcom_vbus_overrride_enable(struct dwc3_qcom *qcom, bool enable) +{ + if (enable) { + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL, + LANE0_PWR_PRESENT); + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL, + UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL); + } else { + dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL, + LANE0_PWR_PRESENT); + dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL, + UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL); + } +} + +static int dwc3_qcom_vbus_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, vbus_nb); + + /* enable vbus override for device mode */ + dwc3_qcom_vbus_overrride_enable(qcom, event); + qcom->mode = event ? USB_DR_MODE_PERIPHERAL : USB_DR_MODE_HOST; + + return NOTIFY_DONE; +} + +static int dwc3_qcom_host_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, host_nb); + + /* disable vbus override in host mode */ + dwc3_qcom_vbus_overrride_enable(qcom, !event); + qcom->mode = event ? USB_DR_MODE_HOST : USB_DR_MODE_PERIPHERAL; + + return NOTIFY_DONE; +} + +static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom) +{ + struct device *dev = qcom->dev; + struct extcon_dev *host_edev; + int ret; + + if (!of_property_read_bool(dev->of_node, "extcon")) + return 0; + + qcom->edev = extcon_get_edev_by_phandle(dev, 0); + if (IS_ERR(qcom->edev)) + return PTR_ERR(qcom->edev); + + qcom->vbus_nb.notifier_call = dwc3_qcom_vbus_notifier; + + qcom->host_edev = extcon_get_edev_by_phandle(dev, 1); + if (IS_ERR(qcom->host_edev)) + qcom->host_edev = NULL; + + ret = devm_extcon_register_notifier(dev, qcom->edev, EXTCON_USB, + &qcom->vbus_nb); + if (ret < 0) { + dev_err(dev, "VBUS notifier register failed\n"); + return ret; + } + + if (qcom->host_edev) + host_edev = qcom->host_edev; + else + host_edev = qcom->edev; + + qcom->host_nb.notifier_call = dwc3_qcom_host_notifier; + ret = devm_extcon_register_notifier(dev, host_edev, EXTCON_USB_HOST, + &qcom->host_nb); + if (ret < 0) { + dev_err(dev, "Host notifier register failed\n"); + return ret; + } + + /* Update initial VBUS override based on extcon state */ + if (extcon_get_state(qcom->edev, EXTCON_USB) || + !extcon_get_state(host_edev, EXTCON_USB_HOST)) + dwc3_qcom_vbus_notifier(&qcom->vbus_nb, true, qcom->edev); + else + dwc3_qcom_vbus_notifier(&qcom->vbus_nb, false, qcom->edev); + + return 0; +} + +static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) +{ + if (qcom->hs_phy_irq) { + disable_irq_wake(qcom->hs_phy_irq); + disable_irq_nosync(qcom->hs_phy_irq); + } + + if (qcom->dp_hs_phy_irq) { + disable_irq_wake(qcom->dp_hs_phy_irq); + disable_irq_nosync(qcom->dp_hs_phy_irq); + } + + if (qcom->dm_hs_phy_irq) { + disable_irq_wake(qcom->dm_hs_phy_irq); + disable_irq_nosync(qcom->dm_hs_phy_irq); + } + + if (qcom->ss_phy_irq) { + disable_irq_wake(qcom->ss_phy_irq); + disable_irq_nosync(qcom->ss_phy_irq); + } +} + +static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) +{ + if (qcom->hs_phy_irq) { + enable_irq(qcom->hs_phy_irq); + enable_irq_wake(qcom->hs_phy_irq); + } + + if (qcom->dp_hs_phy_irq) { + enable_irq(qcom->dp_hs_phy_irq); + enable_irq_wake(qcom->dp_hs_phy_irq); + } + + if (qcom->dm_hs_phy_irq) { + enable_irq(qcom->dm_hs_phy_irq); + enable_irq_wake(qcom->dm_hs_phy_irq); + } + + if (qcom->ss_phy_irq) { + enable_irq(qcom->ss_phy_irq); + enable_irq_wake(qcom->ss_phy_irq); + } +} + +static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) +{ + u32 val; + int i; + + if (qcom->is_suspended) + return 0; + + val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG); + if (!(val & PWR_EVNT_LPM_IN_L2_MASK)) + dev_err(qcom->dev, "HS-PHY not in L2\n"); + + for (i = qcom->num_clocks - 1; i >= 0; i--) + clk_disable_unprepare(qcom->clks[i]); + + qcom->is_suspended = true; + dwc3_qcom_enable_interrupts(qcom); + + return 0; +} + +static int dwc3_qcom_resume(struct dwc3_qcom *qcom) +{ + int ret; + int i; + + if (!qcom->is_suspended) + return 0; + + dwc3_qcom_disable_interrupts(qcom); + + for (i = 0; i < qcom->num_clocks; i++) { + ret = clk_prepare_enable(qcom->clks[i]); + if (ret < 0) { + while (--i >= 0) + clk_disable_unprepare(qcom->clks[i]); + return ret; + } + } + + /* Clear existing events from PHY related to L2 in/out */ + dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG, + PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK); + + qcom->is_suspended = false; + + return 0; +} + +static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data) +{ + struct dwc3_qcom *qcom = data; + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + + /* If pm_suspended then let pm_resume take care of resuming h/w */ + if (qcom->pm_suspended) + return IRQ_HANDLED; + + if (dwc->xhci) + pm_runtime_resume(&dwc->xhci->dev); + + return IRQ_HANDLED; +} + +static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom) +{ + /* Configure dwc3 to use UTMI clock as PIPE clock not present */ + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, + PIPE_UTMI_CLK_DIS); + + usleep_range(100, 1000); + + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, + PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW); + + usleep_range(100, 1000); + + dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, + PIPE_UTMI_CLK_DIS); +} + +static int dwc3_qcom_setup_irq(struct platform_device *pdev) +{ + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + int irq, ret; + + irq = platform_get_irq_byname(pdev, "hs_phy_irq"); + if (irq > 0) { + /* Keep wakeup interrupts disabled until suspend */ + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "qcom_dwc3 HS", qcom); + if (ret) { + dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret); + return ret; + } + qcom->hs_phy_irq = irq; + } + + irq = platform_get_irq_byname(pdev, "dp_hs_phy_irq"); + if (irq > 0) { + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "qcom_dwc3 DP_HS", qcom); + if (ret) { + dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret); + return ret; + } + qcom->dp_hs_phy_irq = irq; + } + + irq = platform_get_irq_byname(pdev, "dm_hs_phy_irq"); + if (irq > 0) { + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "qcom_dwc3 DM_HS", qcom); + if (ret) { + dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret); + return ret; + } + qcom->dm_hs_phy_irq = irq; + } + + irq = platform_get_irq_byname(pdev, "ss_phy_irq"); + if (irq > 0) { + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "qcom_dwc3 SS", qcom); + if (ret) { + dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret); + return ret; + } + qcom->ss_phy_irq = irq; + } + + return 0; +} + +static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count) +{ + struct device *dev = qcom->dev; + struct device_node *np = dev->of_node; + int i; + + qcom->num_clocks = count; + + if (!count) + return 0; + + qcom->clks = devm_kcalloc(dev, qcom->num_clocks, + sizeof(struct clk *), GFP_KERNEL); + if (!qcom->clks) + return -ENOMEM; + + for (i = 0; i < qcom->num_clocks; i++) { + struct clk *clk; + int ret; + + clk = of_clk_get(np, i); + if (IS_ERR(clk)) { + while (--i >= 0) + clk_put(qcom->clks[i]); + return PTR_ERR(clk); + } + + ret = clk_prepare_enable(clk); + if (ret < 0) { + while (--i >= 0) { + clk_disable_unprepare(qcom->clks[i]); + clk_put(qcom->clks[i]); + } + clk_put(clk); + + return ret; + } + + qcom->clks[i] = clk; + } + + return 0; +} + +static int dwc3_qcom_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node, *dwc3_np; + struct device *dev = &pdev->dev; + struct dwc3_qcom *qcom; + struct resource *res; + int ret, i; + bool ignore_pipe_clk; + + qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL); + if (!qcom) + return -ENOMEM; + + platform_set_drvdata(pdev, qcom); + qcom->dev = &pdev->dev; + + qcom->resets = devm_reset_control_array_get_optional_exclusive(dev); + if (IS_ERR(qcom->resets)) { + ret = PTR_ERR(qcom->resets); + dev_err(&pdev->dev, "failed to get resets, err=%d\n", ret); + return ret; + } + + ret = reset_control_assert(qcom->resets); + if (ret) { + dev_err(&pdev->dev, "failed to assert resets, err=%d\n", ret); + return ret; + } + + usleep_range(10, 1000); + + ret = reset_control_deassert(qcom->resets); + if (ret) { + dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret); + goto reset_assert; + } + + ret = dwc3_qcom_clk_init(qcom, of_count_phandle_with_args(np, + "clocks", "#clock-cells")); + if (ret) { + dev_err(dev, "failed to get clocks\n"); + goto reset_assert; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + qcom->qscratch_base = devm_ioremap_resource(dev, res); + if (IS_ERR(qcom->qscratch_base)) { + dev_err(dev, "failed to map qscratch, err=%d\n", ret); + ret = PTR_ERR(qcom->qscratch_base); + goto clk_disable; + } + + ret = dwc3_qcom_setup_irq(pdev); + if (ret) + goto clk_disable; + + dwc3_np = of_get_child_by_name(np, "dwc3"); + if (!dwc3_np) { + dev_err(dev, "failed to find dwc3 core child\n"); + ret = -ENODEV; + goto clk_disable; + } + + /* + * Disable pipe_clk requirement if specified. Used when dwc3 + * operates without SSPHY and only HS/FS/LS modes are supported. + */ + ignore_pipe_clk = device_property_read_bool(dev, + "qcom,select-utmi-as-pipe-clk"); + if (ignore_pipe_clk) + dwc3_qcom_select_utmi_clk(qcom); + + ret = of_platform_populate(np, NULL, NULL, dev); + if (ret) { + dev_err(dev, "failed to register dwc3 core - %d\n", ret); + goto clk_disable; + } + + qcom->dwc3 = of_find_device_by_node(dwc3_np); + if (!qcom->dwc3) { + dev_err(&pdev->dev, "failed to get dwc3 platform device\n"); + goto depopulate; + } + + qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev); + + /* enable vbus override for device mode */ + if (qcom->mode == USB_DR_MODE_PERIPHERAL) + dwc3_qcom_vbus_overrride_enable(qcom, true); + + /* register extcon to override sw_vbus on Vbus change later */ + ret = dwc3_qcom_register_extcon(qcom); + if (ret) + goto depopulate; + + device_init_wakeup(&pdev->dev, 1); + qcom->is_suspended = false; + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + pm_runtime_forbid(dev); + + return 0; + +depopulate: + of_platform_depopulate(&pdev->dev); +clk_disable: + for (i = qcom->num_clocks - 1; i >= 0; i--) { + clk_disable_unprepare(qcom->clks[i]); + clk_put(qcom->clks[i]); + } +reset_assert: + reset_control_assert(qcom->resets); + + return ret; +} + +static int dwc3_qcom_remove(struct platform_device *pdev) +{ + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + int i; + + of_platform_depopulate(dev); + + for (i = qcom->num_clocks - 1; i >= 0; i--) { + clk_disable_unprepare(qcom->clks[i]); + clk_put(qcom->clks[i]); + } + qcom->num_clocks = 0; + + reset_control_assert(qcom->resets); + + pm_runtime_allow(dev); + pm_runtime_disable(dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int dwc3_qcom_pm_suspend(struct device *dev) +{ + struct dwc3_qcom *qcom = dev_get_drvdata(dev); + int ret = 0; + + ret = dwc3_qcom_suspend(qcom); + if (!ret) + qcom->pm_suspended = true; + + return ret; +} + +static int dwc3_qcom_pm_resume(struct device *dev) +{ + struct dwc3_qcom *qcom = dev_get_drvdata(dev); + int ret; + + ret = dwc3_qcom_resume(qcom); + if (!ret) + qcom->pm_suspended = false; + + return ret; +} +#endif + +#ifdef CONFIG_PM +static int dwc3_qcom_runtime_suspend(struct device *dev) +{ + struct dwc3_qcom *qcom = dev_get_drvdata(dev); + + return dwc3_qcom_suspend(qcom); +} + +static int dwc3_qcom_runtime_resume(struct device *dev) +{ + struct dwc3_qcom *qcom = dev_get_drvdata(dev); + + return dwc3_qcom_resume(qcom); +} +#endif + +static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume) + SET_RUNTIME_PM_OPS(dwc3_qcom_runtime_suspend, dwc3_qcom_runtime_resume, + NULL) +}; + +static const struct of_device_id dwc3_qcom_of_match[] = { + { .compatible = "qcom,dwc3" }, + { .compatible = "qcom,msm8996-dwc3" }, + { .compatible = "qcom,sdm845-dwc3" }, + { } +}; +MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match); + +static struct platform_driver dwc3_qcom_driver = { + .probe = dwc3_qcom_probe, + .remove = dwc3_qcom_remove, + .driver = { + .name = "dwc3-qcom", + .pm = &dwc3_qcom_dev_pm_ops, + .of_match_table = dwc3_qcom_of_match, + }, +}; + +module_platform_driver(dwc3_qcom_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("DesignWare DWC3 QCOM Glue Driver"); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 5a991bca8ed7..c77ff50a88a2 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -66,7 +66,7 @@ static int dwc3_ep0_start_trans(struct dwc3_ep *dep) struct dwc3 *dwc; int ret; - if (dep->flags & DWC3_EP_BUSY) + if (dep->flags & DWC3_EP_TRANSFER_STARTED) return 0; dwc = dep->dwc; @@ -79,8 +79,6 @@ static int dwc3_ep0_start_trans(struct dwc3_ep *dep) if (ret < 0) return ret; - dep->flags |= DWC3_EP_BUSY; - dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep); dwc->ep0_next_event = DWC3_EP0_COMPLETE; return 0; @@ -913,7 +911,7 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc, { struct dwc3_ep *dep = dwc->eps[event->endpoint_number]; - dep->flags &= ~DWC3_EP_BUSY; + dep->flags &= ~DWC3_EP_TRANSFER_STARTED; dep->resource_index = 0; dwc->setup_packet_pending = false; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 0dedf8a799f4..69bf137aab37 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -27,6 +27,9 @@ #include "gadget.h" #include "io.h" +#define DWC3_ALIGN_FRAME(d) (((d)->frame_number + (d)->interval) \ + & ~((d)->interval - 1)) + /** * dwc3_gadget_set_test_mode - enables usb2 test modes * @dwc: pointer to our context structure @@ -375,6 +378,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, switch (DWC3_DEPCMD_CMD(cmd)) { case DWC3_DEPCMD_STARTTRANSFER: dep->flags |= DWC3_EP_TRANSFER_STARTED; + dwc3_gadget_ep_get_transfer_index(dep); break; case DWC3_DEPCMD_ENDTRANSFER: dep->flags &= ~DWC3_EP_TRANSFER_STARTED; @@ -455,7 +459,17 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep) dep->trb_pool_dma = 0; } -static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep); +static int dwc3_gadget_set_xfer_resource(struct dwc3_ep *dep) +{ + struct dwc3_gadget_ep_cmd_params params; + + memset(¶ms, 0x00, sizeof(params)); + + params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1); + + return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE, + ¶ms); +} /** * dwc3_gadget_start_config - configure ep resources @@ -491,9 +505,10 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep); * triggered only when called for EP0-out, which always happens first, and which * should only happen in one of the above conditions. */ -static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) +static int dwc3_gadget_start_config(struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; + struct dwc3 *dwc; u32 cmd; int i; int ret; @@ -503,6 +518,7 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) memset(¶ms, 0x00, sizeof(params)); cmd = DWC3_DEPCMD_DEPSTARTCFG; + dwc = dep->dwc; ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); if (ret) @@ -514,7 +530,7 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) if (!dep) continue; - ret = dwc3_gadget_set_xfer_resource(dwc, dep); + ret = dwc3_gadget_set_xfer_resource(dep); if (ret) return ret; } @@ -522,16 +538,12 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) return 0; } -static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, - bool modify, bool restore) +static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action) { const struct usb_ss_ep_comp_descriptor *comp_desc; const struct usb_endpoint_descriptor *desc; struct dwc3_gadget_ep_cmd_params params; - - if (dev_WARN_ONCE(dwc->dev, modify && restore, - "Can't modify and restore\n")) - return -EINVAL; + struct dwc3 *dwc = dep->dwc; comp_desc = dep->endpoint.comp_desc; desc = dep->endpoint.desc; @@ -547,14 +559,9 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst - 1); } - if (modify) { - params.param0 |= DWC3_DEPCFG_ACTION_MODIFY; - } else if (restore) { - params.param0 |= DWC3_DEPCFG_ACTION_RESTORE; + params.param0 |= action; + if (action == DWC3_DEPCFG_ACTION_RESTORE) params.param2 |= dep->saved_state; - } else { - params.param0 |= DWC3_DEPCFG_ACTION_INIT; - } if (usb_endpoint_xfer_control(desc)) params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN; @@ -594,29 +601,15 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, ¶ms); } -static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep) -{ - struct dwc3_gadget_ep_cmd_params params; - - memset(¶ms, 0x00, sizeof(params)); - - params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1); - - return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE, - ¶ms); -} - /** * __dwc3_gadget_ep_enable - initializes a hw endpoint * @dep: endpoint to be initialized - * @modify: if true, modify existing endpoint configuration - * @restore: if true, restore endpoint configuration from scratch buffer + * @action: one of INIT, MODIFY or RESTORE * * Caller should take care of locking. Execute all necessary commands to * initialize a HW endpoint so it can be used by a gadget driver. */ -static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, - bool modify, bool restore) +static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) { const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; struct dwc3 *dwc = dep->dwc; @@ -625,12 +618,12 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, int ret; if (!(dep->flags & DWC3_EP_ENABLED)) { - ret = dwc3_gadget_start_config(dwc, dep); + ret = dwc3_gadget_start_config(dep); if (ret) return ret; } - ret = dwc3_gadget_set_ep_config(dwc, dep, modify, restore); + ret = dwc3_gadget_set_ep_config(dep, action); if (ret) return ret; @@ -671,7 +664,8 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, * Issue StartTransfer here with no-op TRB so we can always rely on No * Response Update Transfer command. */ - if (usb_endpoint_xfer_bulk(desc)) { + if (usb_endpoint_xfer_bulk(desc) || + usb_endpoint_xfer_int(desc)) { struct dwc3_gadget_ep_cmd_params params; struct dwc3_trb *trb; dma_addr_t trb_dma; @@ -689,26 +683,20 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); if (ret < 0) return ret; - - dep->flags |= DWC3_EP_BUSY; - - dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep); - WARN_ON_ONCE(!dep->resource_index); } - out: trace_dwc3_gadget_ep_enable(dep); return 0; } -static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force); +static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force); static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_request *req; - dwc3_stop_active_transfer(dwc, dep->number, true); + dwc3_stop_active_transfer(dep, true); /* - giveback all requests to gadget driver */ while (!list_empty(&dep->started_list)) { @@ -806,7 +794,7 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep, return 0; spin_lock_irqsave(&dwc->lock, flags); - ret = __dwc3_gadget_ep_enable(dep, false, false); + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -840,7 +828,7 @@ static int dwc3_gadget_ep_disable(struct usb_ep *ep) } static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep, - gfp_t gfp_flags) + gfp_t gfp_flags) { struct dwc3_request *req; struct dwc3_ep *dep = to_dwc3_ep(ep); @@ -849,11 +837,10 @@ static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep, if (!req) return NULL; + req->direction = dep->direction; req->epnum = dep->number; req->dep = dep; - dep->allocated_requests++; - trace_dwc3_alloc_request(req); return &req->request; @@ -863,14 +850,58 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep, struct usb_request *request) { struct dwc3_request *req = to_dwc3_request(request); - struct dwc3_ep *dep = to_dwc3_ep(ep); - dep->allocated_requests--; trace_dwc3_free_request(req); kfree(req); } -static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep); +/** + * dwc3_ep_prev_trb - returns the previous TRB in the ring + * @dep: The endpoint with the TRB ring + * @index: The index of the current TRB in the ring + * + * Returns the TRB prior to the one pointed to by the index. If the + * index is 0, we will wrap backwards, skip the link TRB, and return + * the one just before that. + */ +static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index) +{ + u8 tmp = index; + + if (!tmp) + tmp = DWC3_TRB_NUM - 1; + + return &dep->trb_pool[tmp - 1]; +} + +static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) +{ + struct dwc3_trb *tmp; + u8 trbs_left; + + /* + * If enqueue & dequeue are equal than it is either full or empty. + * + * One way to know for sure is if the TRB right before us has HWO bit + * set or not. If it has, then we're definitely full and can't fit any + * more transfers in our ring. + */ + if (dep->trb_enqueue == dep->trb_dequeue) { + tmp = dwc3_ep_prev_trb(dep, dep->trb_enqueue); + if (tmp->ctrl & DWC3_TRB_CTRL_HWO) + return 0; + + return DWC3_TRB_NUM - 1; + } + + trbs_left = dep->trb_dequeue - dep->trb_enqueue; + trbs_left &= (DWC3_TRB_NUM - 1); + + if (dep->trb_dequeue < dep->trb_enqueue) + trbs_left--; + + return trbs_left; +} static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, dma_addr_t dma, unsigned length, unsigned chain, unsigned node, @@ -985,11 +1016,19 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_request *req, unsigned chain, unsigned node) { struct dwc3_trb *trb; - unsigned length = req->request.length; + unsigned int length; + dma_addr_t dma; unsigned stream_id = req->request.stream_id; unsigned short_not_ok = req->request.short_not_ok; unsigned no_interrupt = req->request.no_interrupt; - dma_addr_t dma = req->request.dma; + + if (req->request.num_sgs > 0) { + length = sg_dma_len(req->start_sg); + dma = sg_dma_address(req->start_sg); + } else { + length = req->request.length; + dma = req->request.dma; + } trb = &dep->trb_pool[dep->trb_enqueue]; @@ -997,69 +1036,23 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, dwc3_gadget_move_started_request(req); req->trb = trb; req->trb_dma = dwc3_trb_dma_offset(dep, trb); - dep->queued_requests++; } __dwc3_prepare_one_trb(dep, trb, dma, length, chain, node, stream_id, short_not_ok, no_interrupt); } -/** - * dwc3_ep_prev_trb - returns the previous TRB in the ring - * @dep: The endpoint with the TRB ring - * @index: The index of the current TRB in the ring - * - * Returns the TRB prior to the one pointed to by the index. If the - * index is 0, we will wrap backwards, skip the link TRB, and return - * the one just before that. - */ -static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index) -{ - u8 tmp = index; - - if (!tmp) - tmp = DWC3_TRB_NUM - 1; - - return &dep->trb_pool[tmp - 1]; -} - -static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) -{ - struct dwc3_trb *tmp; - u8 trbs_left; - - /* - * If enqueue & dequeue are equal than it is either full or empty. - * - * One way to know for sure is if the TRB right before us has HWO bit - * set or not. If it has, then we're definitely full and can't fit any - * more transfers in our ring. - */ - if (dep->trb_enqueue == dep->trb_dequeue) { - tmp = dwc3_ep_prev_trb(dep, dep->trb_enqueue); - if (tmp->ctrl & DWC3_TRB_CTRL_HWO) - return 0; - - return DWC3_TRB_NUM - 1; - } - - trbs_left = dep->trb_dequeue - dep->trb_enqueue; - trbs_left &= (DWC3_TRB_NUM - 1); - - if (dep->trb_dequeue < dep->trb_enqueue) - trbs_left--; - - return trbs_left; -} - static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, struct dwc3_request *req) { - struct scatterlist *sg = req->sg; + struct scatterlist *sg = req->start_sg; struct scatterlist *s; int i; - for_each_sg(sg, s, req->num_pending_sgs, i) { + unsigned int remaining = req->request.num_mapped_sgs + - req->num_queued_sgs; + + for_each_sg(sg, s, remaining, i) { unsigned int length = req->request.length; unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc); unsigned int rem = length % maxp; @@ -1088,6 +1081,18 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, dwc3_prepare_one_trb(dep, req, chain, i); } + /* + * There can be a situation where all sgs in sglist are not + * queued because of insufficient trb number. To handle this + * case, update start_sg to next sg to be queued, so that + * we have free trbs we can continue queuing from where we + * previously stopped + */ + if (chain) + req->start_sg = sg_next(s); + + req->num_queued_sgs++; + if (!dwc3_calc_trbs_left(dep)) break; } @@ -1178,6 +1183,8 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep) return; req->sg = req->request.sg; + req->start_sg = req->sg; + req->num_queued_sgs = 0; req->num_pending_sgs = req->request.num_mapped_sgs; if (req->num_pending_sgs > 0) @@ -1201,7 +1208,7 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) if (!dwc3_calc_trbs_left(dep)) return 0; - starting = !(dep->flags & DWC3_EP_BUSY); + starting = !(dep->flags & DWC3_EP_TRANSFER_STARTED); dwc3_prepare_trbs(dep); req = next_request(&dep->started_list); @@ -1233,18 +1240,10 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) */ if (req->trb) memset(req->trb, 0, sizeof(struct dwc3_trb)); - dep->queued_requests--; dwc3_gadget_del_and_unmap_request(dep, req, ret); return ret; } - dep->flags |= DWC3_EP_BUSY; - - if (starting) { - dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep); - WARN_ON_ONCE(!dep->resource_index); - } - return 0; } @@ -1256,35 +1255,19 @@ static int __dwc3_gadget_get_frame(struct dwc3 *dwc) return DWC3_DSTS_SOFFN(reg); } -static void __dwc3_gadget_start_isoc(struct dwc3 *dwc, - struct dwc3_ep *dep, u32 cur_uf) +static void __dwc3_gadget_start_isoc(struct dwc3_ep *dep) { if (list_empty(&dep->pending_list)) { - dev_info(dwc->dev, "%s: ran out of requests\n", + dev_info(dep->dwc->dev, "%s: ran out of requests\n", dep->name); dep->flags |= DWC3_EP_PENDING_REQUEST; return; } - /* - * Schedule the first trb for one interval in the future or at - * least 4 microframes. - */ - dep->frame_number = cur_uf + max_t(u32, 4, dep->interval); + dep->frame_number = DWC3_ALIGN_FRAME(dep); __dwc3_gadget_kick_transfer(dep); } -static void dwc3_gadget_start_isoc(struct dwc3 *dwc, - struct dwc3_ep *dep, const struct dwc3_event_depevt *event) -{ - u32 cur_uf, mask; - - mask = ~(dep->interval - 1); - cur_uf = event->parameters & mask; - - __dwc3_gadget_start_isoc(dwc, dep, cur_uf); -} - static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) { struct dwc3 *dwc = dep->dwc; @@ -1303,8 +1286,6 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) req->request.actual = 0; req->request.status = -EINPROGRESS; - req->direction = dep->direction; - req->epnum = dep->number; trace_dwc3_ep_queue(req); @@ -1319,28 +1300,18 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) * errors which will force us issue EndTransfer command. */ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { - if ((dep->flags & DWC3_EP_PENDING_REQUEST)) { - if (dep->flags & DWC3_EP_TRANSFER_STARTED) { - dwc3_stop_active_transfer(dwc, dep->number, true); - dep->flags = DWC3_EP_ENABLED; - } else { - u32 cur_uf; + if (!(dep->flags & DWC3_EP_PENDING_REQUEST) && + !(dep->flags & DWC3_EP_TRANSFER_STARTED)) + return 0; - cur_uf = __dwc3_gadget_get_frame(dwc); - __dwc3_gadget_start_isoc(dwc, dep, cur_uf); - dep->flags &= ~DWC3_EP_PENDING_REQUEST; + if ((dep->flags & DWC3_EP_PENDING_REQUEST)) { + if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) { + __dwc3_gadget_start_isoc(dep); + return 0; } - return 0; } - - if ((dep->flags & DWC3_EP_BUSY) && - !(dep->flags & DWC3_EP_MISSED_ISOC)) - goto out; - - return 0; } -out: return __dwc3_gadget_kick_transfer(dep); } @@ -1390,7 +1361,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, } if (r == req) { /* wait until it is processed */ - dwc3_stop_active_transfer(dwc, dep->number, true); + dwc3_stop_active_transfer(dep, true); /* * If request was already started, this means we had to @@ -1463,7 +1434,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, out1: /* giveback the request */ - dep->queued_requests--; + dwc3_gadget_giveback(dep, req, -ECONNRESET); out0: @@ -1878,14 +1849,14 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, false, false); + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err0; } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, false, false); + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err1; @@ -2082,113 +2053,142 @@ static const struct usb_gadget_ops dwc3_gadget_ops = { /* -------------------------------------------------------------------------- */ -static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 total) +static int dwc3_gadget_init_control_endpoint(struct dwc3_ep *dep) { - struct dwc3_ep *dep; - u8 epnum; + struct dwc3 *dwc = dep->dwc; - INIT_LIST_HEAD(&dwc->gadget.ep_list); + usb_ep_set_maxpacket_limit(&dep->endpoint, 512); + dep->endpoint.maxburst = 1; + dep->endpoint.ops = &dwc3_gadget_ep0_ops; + if (!dep->direction) + dwc->gadget.ep0 = &dep->endpoint; - for (epnum = 0; epnum < total; epnum++) { - bool direction = epnum & 1; - u8 num = epnum >> 1; + dep->endpoint.caps.type_control = true; - dep = kzalloc(sizeof(*dep), GFP_KERNEL); - if (!dep) - return -ENOMEM; + return 0; +} - dep->dwc = dwc; - dep->number = epnum; - dep->direction = direction; - dep->regs = dwc->regs + DWC3_DEP_BASE(epnum); - dwc->eps[epnum] = dep; +static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + int mdwidth; + int kbytes; + int size; - snprintf(dep->name, sizeof(dep->name), "ep%u%s", num, - direction ? "in" : "out"); + mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); + /* MDWIDTH is represented in bits, we need it in bytes */ + mdwidth /= 8; - dep->endpoint.name = dep->name; + size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1)); + if (dwc3_is_usb31(dwc)) + size = DWC31_GTXFIFOSIZ_TXFDEF(size); + else + size = DWC3_GTXFIFOSIZ_TXFDEF(size); - if (!(dep->number > 1)) { - dep->endpoint.desc = &dwc3_gadget_ep0_desc; - dep->endpoint.comp_desc = NULL; - } + /* FIFO Depth is in MDWDITH bytes. Multiply */ + size *= mdwidth; - spin_lock_init(&dep->lock); - - if (num == 0) { - usb_ep_set_maxpacket_limit(&dep->endpoint, 512); - dep->endpoint.maxburst = 1; - dep->endpoint.ops = &dwc3_gadget_ep0_ops; - if (!direction) - dwc->gadget.ep0 = &dep->endpoint; - } else if (direction) { - int mdwidth; - int kbytes; - int size; - int ret; - - mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); - /* MDWIDTH is represented in bits, we need it in bytes */ - mdwidth /= 8; - - size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(num)); - if (dwc3_is_usb31(dwc)) - size = DWC31_GTXFIFOSIZ_TXFDEF(size); - else - size = DWC3_GTXFIFOSIZ_TXFDEF(size); + kbytes = size / 1024; + if (kbytes == 0) + kbytes = 1; - /* FIFO Depth is in MDWDITH bytes. Multiply */ - size *= mdwidth; + /* + * FIFO sizes account an extra MDWIDTH * (kbytes + 1) bytes for + * internal overhead. We don't really know how these are used, + * but documentation say it exists. + */ + size -= mdwidth * (kbytes + 1); + size /= kbytes; - kbytes = size / 1024; - if (kbytes == 0) - kbytes = 1; + usb_ep_set_maxpacket_limit(&dep->endpoint, size); - /* - * FIFO sizes account an extra MDWIDTH * (kbytes + 1) bytes for - * internal overhead. We don't really know how these are used, - * but documentation say it exists. - */ - size -= mdwidth * (kbytes + 1); - size /= kbytes; + dep->endpoint.max_streams = 15; + dep->endpoint.ops = &dwc3_gadget_ep_ops; + list_add_tail(&dep->endpoint.ep_list, + &dwc->gadget.ep_list); + dep->endpoint.caps.type_iso = true; + dep->endpoint.caps.type_bulk = true; + dep->endpoint.caps.type_int = true; - usb_ep_set_maxpacket_limit(&dep->endpoint, size); + return dwc3_alloc_trb_pool(dep); +} - dep->endpoint.max_streams = 15; - dep->endpoint.ops = &dwc3_gadget_ep_ops; - list_add_tail(&dep->endpoint.ep_list, - &dwc->gadget.ep_list); +static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; - ret = dwc3_alloc_trb_pool(dep); - if (ret) - return ret; - } else { - int ret; + usb_ep_set_maxpacket_limit(&dep->endpoint, 1024); + dep->endpoint.max_streams = 15; + dep->endpoint.ops = &dwc3_gadget_ep_ops; + list_add_tail(&dep->endpoint.ep_list, + &dwc->gadget.ep_list); + dep->endpoint.caps.type_iso = true; + dep->endpoint.caps.type_bulk = true; + dep->endpoint.caps.type_int = true; - usb_ep_set_maxpacket_limit(&dep->endpoint, 1024); - dep->endpoint.max_streams = 15; - dep->endpoint.ops = &dwc3_gadget_ep_ops; - list_add_tail(&dep->endpoint.ep_list, - &dwc->gadget.ep_list); + return dwc3_alloc_trb_pool(dep); +} - ret = dwc3_alloc_trb_pool(dep); - if (ret) - return ret; - } +static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) +{ + struct dwc3_ep *dep; + bool direction = epnum & 1; + int ret; + u8 num = epnum >> 1; - if (num == 0) { - dep->endpoint.caps.type_control = true; - } else { - dep->endpoint.caps.type_iso = true; - dep->endpoint.caps.type_bulk = true; - dep->endpoint.caps.type_int = true; - } + dep = kzalloc(sizeof(*dep), GFP_KERNEL); + if (!dep) + return -ENOMEM; - dep->endpoint.caps.dir_in = direction; - dep->endpoint.caps.dir_out = !direction; + dep->dwc = dwc; + dep->number = epnum; + dep->direction = direction; + dep->regs = dwc->regs + DWC3_DEP_BASE(epnum); + dwc->eps[epnum] = dep; - INIT_LIST_HEAD(&dep->pending_list); - INIT_LIST_HEAD(&dep->started_list); + snprintf(dep->name, sizeof(dep->name), "ep%u%s", num, + direction ? "in" : "out"); + + dep->endpoint.name = dep->name; + + if (!(dep->number > 1)) { + dep->endpoint.desc = &dwc3_gadget_ep0_desc; + dep->endpoint.comp_desc = NULL; + } + + spin_lock_init(&dep->lock); + + if (num == 0) + ret = dwc3_gadget_init_control_endpoint(dep); + else if (direction) + ret = dwc3_gadget_init_in_endpoint(dep); + else + ret = dwc3_gadget_init_out_endpoint(dep); + + if (ret) + return ret; + + dep->endpoint.caps.dir_in = direction; + dep->endpoint.caps.dir_out = !direction; + + INIT_LIST_HEAD(&dep->pending_list); + INIT_LIST_HEAD(&dep->started_list); + + return 0; +} + +static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 total) +{ + u8 epnum; + + INIT_LIST_HEAD(&dwc->gadget.ep_list); + + for (epnum = 0; epnum < total; epnum++) { + int ret; + + ret = dwc3_gadget_init_endpoint(dwc, epnum); + if (ret) + return ret; } return 0; @@ -2223,20 +2223,14 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) /* -------------------------------------------------------------------------- */ -static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, +static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, struct dwc3_request *req, struct dwc3_trb *trb, - const struct dwc3_event_depevt *event, int status, - int chain) + const struct dwc3_event_depevt *event, int status, int chain) { unsigned int count; - unsigned int s_pkt = 0; - unsigned int trb_status; dwc3_ep_inc_deq(dep); - if (req->trb == trb) - dep->queued_requests--; - trace_dwc3_complete_trb(dep, trb); /* @@ -2268,159 +2262,140 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN) return 1; - if (dep->direction) { - if (count) { - trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size); - if (trb_status == DWC3_TRBSTS_MISSED_ISOC) { - /* - * If missed isoc occurred and there is - * no request queued then issue END - * TRANSFER, so that core generates - * next xfernotready and we will issue - * a fresh START TRANSFER. - * If there are still queued request - * then wait, do not issue either END - * or UPDATE TRANSFER, just attach next - * request in pending_list during - * giveback.If any future queued request - * is successfully transferred then we - * will issue UPDATE TRANSFER for all - * request in the pending_list. - */ - dep->flags |= DWC3_EP_MISSED_ISOC; - } else { - dev_err(dwc->dev, "incomplete IN transfer %s\n", - dep->name); - status = -ECONNRESET; - } - } else { - dep->flags &= ~DWC3_EP_MISSED_ISOC; - } - } else { - if (count && (event->status & DEPEVT_STATUS_SHORT)) - s_pkt = 1; - } - - if (s_pkt && !chain) + if (event->status & DEPEVT_STATUS_SHORT && !chain) return 1; - if ((event->status & DEPEVT_STATUS_IOC) && - (trb->ctrl & DWC3_TRB_CTRL_IOC)) + if (event->status & DEPEVT_STATUS_IOC) return 1; return 0; } -static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, - const struct dwc3_event_depevt *event, int status) +static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep, + struct dwc3_request *req, const struct dwc3_event_depevt *event, + int status) { - struct dwc3_request *req, *n; - struct dwc3_trb *trb; - bool ioc = false; - int ret = 0; + struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue]; + struct scatterlist *sg = req->sg; + struct scatterlist *s; + unsigned int pending = req->num_pending_sgs; + unsigned int i; + int ret = 0; - list_for_each_entry_safe(req, n, &dep->started_list, list) { - unsigned length; - int chain; + for_each_sg(sg, s, pending, i) { + trb = &dep->trb_pool[dep->trb_dequeue]; - length = req->request.length; - chain = req->num_pending_sgs > 0; - if (chain) { - struct scatterlist *sg = req->sg; - struct scatterlist *s; - unsigned int pending = req->num_pending_sgs; - unsigned int i; - - for_each_sg(sg, s, pending, i) { - trb = &dep->trb_pool[dep->trb_dequeue]; - - if (trb->ctrl & DWC3_TRB_CTRL_HWO) - break; - - req->sg = sg_next(s); - req->num_pending_sgs--; - - ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, - event, status, chain); - if (ret) - break; - } - } else { - trb = &dep->trb_pool[dep->trb_dequeue]; - ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, - event, status, chain); - } + if (trb->ctrl & DWC3_TRB_CTRL_HWO) + break; - if (req->unaligned || req->zero) { - trb = &dep->trb_pool[dep->trb_dequeue]; - ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, - event, status, false); - req->unaligned = false; - req->zero = false; - } + req->sg = sg_next(s); + req->num_pending_sgs--; - req->request.actual = length - req->remaining; + ret = dwc3_gadget_ep_reclaim_completed_trb(dep, req, + trb, event, status, true); + if (ret) + break; + } + + return ret; +} - if ((req->request.actual < length) && req->num_pending_sgs) - return __dwc3_gadget_kick_transfer(dep); +static int dwc3_gadget_ep_reclaim_trb_linear(struct dwc3_ep *dep, + struct dwc3_request *req, const struct dwc3_event_depevt *event, + int status) +{ + struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue]; - dwc3_gadget_giveback(dep, req, status); + return dwc3_gadget_ep_reclaim_completed_trb(dep, req, trb, + event, status, false); +} - if (ret) { - if ((event->status & DEPEVT_STATUS_IOC) && - (trb->ctrl & DWC3_TRB_CTRL_IOC)) - ioc = true; - break; - } +static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req) +{ + return req->request.actual == req->request.length; +} + +static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event, + struct dwc3_request *req, int status) +{ + int ret; + + if (req->num_pending_sgs) + ret = dwc3_gadget_ep_reclaim_trb_sg(dep, req, event, + status); + else + ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, + status); + + if (req->unaligned || req->zero) { + ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, + status); + req->unaligned = false; + req->zero = false; } - /* - * Our endpoint might get disabled by another thread during - * dwc3_gadget_giveback(). If that happens, we're just gonna return 1 - * early on so DWC3_EP_BUSY flag gets cleared - */ - if (!dep->endpoint.desc) - return 1; + req->request.actual = req->request.length - req->remaining; - if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && - list_empty(&dep->started_list)) { - if (list_empty(&dep->pending_list)) { - /* - * If there is no entry in request list then do - * not issue END TRANSFER now. Just set PENDING - * flag, so that END TRANSFER is issued when an - * entry is added into request list. - */ - dep->flags = DWC3_EP_PENDING_REQUEST; - } else { - dwc3_stop_active_transfer(dwc, dep->number, true); - dep->flags = DWC3_EP_ENABLED; - } - return 1; + if (!dwc3_gadget_ep_request_completed(req) && + req->num_pending_sgs) { + __dwc3_gadget_kick_transfer(dep); + goto out; } - if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && ioc) - return 0; + dwc3_gadget_giveback(dep, req, status); + +out: + return ret; +} + +static void dwc3_gadget_ep_cleanup_completed_requests(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event, int status) +{ + struct dwc3_request *req; + struct dwc3_request *tmp; + + list_for_each_entry_safe(req, tmp, &dep->started_list, list) { + int ret; + + ret = dwc3_gadget_ep_cleanup_completed_request(dep, event, + req, status); + if (ret) + break; + } +} - return 1; +static void dwc3_gadget_endpoint_frame_from_event(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + dep->frame_number = event->parameters; } -static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, - struct dwc3_ep *dep, const struct dwc3_event_depevt *event) +static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) { + struct dwc3 *dwc = dep->dwc; unsigned status = 0; - int clean_busy; - u32 is_xfer_complete; + bool stop = false; - is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE); + dwc3_gadget_endpoint_frame_from_event(dep, event); if (event->status & DEPEVT_STATUS_BUSERR) status = -ECONNRESET; - clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status); - if (clean_busy && (!dep->endpoint.desc || is_xfer_complete || - usb_endpoint_xfer_isoc(dep->endpoint.desc))) - dep->flags &= ~DWC3_EP_BUSY; + if (event->status & DEPEVT_STATUS_MISSED_ISOC) { + status = -EXDEV; + + if (list_empty(&dep->started_list)) + stop = true; + } + + dwc3_gadget_ep_cleanup_completed_requests(dep, event, status); + + if (stop) { + dwc3_stop_active_transfer(dep, true); + dep->flags = DWC3_EP_ENABLED; + } /* * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround. @@ -2446,17 +2421,13 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, dwc->u1u2 = 0; } +} - /* - * Our endpoint might get disabled by another thread during - * dwc3_gadget_giveback(). If that happens, we're just gonna return 1 - * early on so DWC3_EP_BUSY flag gets cleared - */ - if (!dep->endpoint.desc) - return; - - if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) - __dwc3_gadget_kick_transfer(dep); +static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + dwc3_gadget_endpoint_frame_from_event(dep, event); + __dwc3_gadget_start_isoc(dep); } static void dwc3_endpoint_interrupt(struct dwc3 *dwc, @@ -2483,32 +2454,11 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, } switch (event->endpoint_event) { - case DWC3_DEPEVT_XFERCOMPLETE: - dep->resource_index = 0; - - if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { - dev_err(dwc->dev, "XferComplete for Isochronous endpoint\n"); - return; - } - - dwc3_endpoint_transfer_complete(dwc, dep, event); - break; case DWC3_DEPEVT_XFERINPROGRESS: - dwc3_endpoint_transfer_complete(dwc, dep, event); + dwc3_gadget_endpoint_transfer_in_progress(dep, event); break; case DWC3_DEPEVT_XFERNOTREADY: - if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) - dwc3_gadget_start_isoc(dwc, dep, event); - else - __dwc3_gadget_kick_transfer(dep); - - break; - case DWC3_DEPEVT_STREAMEVT: - if (!usb_endpoint_xfer_bulk(dep->endpoint.desc)) { - dev_err(dwc->dev, "Stream event for non-Bulk %s\n", - dep->name); - return; - } + dwc3_gadget_endpoint_transfer_not_ready(dep, event); break; case DWC3_DEPEVT_EPCMDCMPLT: cmd = DEPEVT_PARAMETER_CMD(event->parameters); @@ -2518,6 +2468,8 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, wake_up(&dep->wait_end_transfer); } break; + case DWC3_DEPEVT_STREAMEVT: + case DWC3_DEPEVT_XFERCOMPLETE: case DWC3_DEPEVT_RXTXFIFOEVT: break; } @@ -2562,15 +2514,13 @@ static void dwc3_reset_gadget(struct dwc3 *dwc) } } -static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) +static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force) { - struct dwc3_ep *dep; + struct dwc3 *dwc = dep->dwc; struct dwc3_gadget_ep_cmd_params params; u32 cmd; int ret; - dep = dwc->eps[epnum]; - if ((dep->flags & DWC3_EP_END_TRANSFER_PENDING) || !dep->resource_index) return; @@ -2614,7 +2564,6 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); WARN_ON_ONCE(ret); dep->resource_index = 0; - dep->flags &= ~DWC3_EP_BUSY; if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A) { dep->flags |= DWC3_EP_END_TRANSFER_PENDING; @@ -2816,14 +2765,14 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) } dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, true, false); + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_MODIFY); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, true, false); + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_MODIFY); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 578aa856f986..db610c56f1d6 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -98,13 +98,12 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol); * Caller should take care of locking. Returns the transfer resource * index for a given endpoint. */ -static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep) +static inline void dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep) { u32 res_id; res_id = dwc3_readl(dep->regs, DWC3_DEPCMD); - - return DWC3_DEPCMD_GET_RSC_IDX(res_id); + dep->resource_index = DWC3_DEPCMD_GET_RSC_IDX(res_id); } #endif /* __DRIVERS_USB_DWC3_GADGET_H */ diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index babaee981aa7..f22714cce070 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -230,17 +230,14 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, TP_fast_assign( __assign_str(name, dep->name); __entry->trb = trb; - __entry->allocated = dep->allocated_requests; - __entry->queued = dep->queued_requests; __entry->bpl = trb->bpl; __entry->bph = trb->bph; __entry->size = trb->size; __entry->ctrl = trb->ctrl; __entry->type = usb_endpoint_type(dep->endpoint.desc); ), - TP_printk("%s: %d/%d trb %p buf %08x%08x size %s%d ctrl %08x (%c%c%c%c:%c%c:%s)", - __get_str(name), __entry->queued, __entry->allocated, - __entry->trb, __entry->bph, __entry->bpl, + TP_printk("%s: trb %p buf %08x%08x size %s%d ctrl %08x (%c%c%c%c:%c%c:%s)", + __get_str(name), __entry->trb, __entry->bph, __entry->bpl, ({char *s; int pcm = ((__entry->size >> 24) & 3) + 1; switch (__entry->type) { @@ -306,7 +303,7 @@ DECLARE_EVENT_CLASS(dwc3_log_ep, __entry->trb_enqueue = dep->trb_enqueue; __entry->trb_dequeue = dep->trb_dequeue; ), - TP_printk("%s: mps %d/%d streams %d burst %d ring %d/%d flags %c:%c%c%c%c%c:%c:%c", + TP_printk("%s: mps %d/%d streams %d burst %d ring %d/%d flags %c:%c%c%c%c:%c:%c", __get_str(name), __entry->maxpacket, __entry->maxpacket_limit, __entry->max_streams, __entry->maxburst, __entry->trb_enqueue, @@ -314,9 +311,8 @@ DECLARE_EVENT_CLASS(dwc3_log_ep, __entry->flags & DWC3_EP_ENABLED ? 'E' : 'e', __entry->flags & DWC3_EP_STALL ? 'S' : 's', __entry->flags & DWC3_EP_WEDGE ? 'W' : 'w', - __entry->flags & DWC3_EP_BUSY ? 'B' : 'b', + __entry->flags & DWC3_EP_TRANSFER_STARTED ? 'B' : 'b', __entry->flags & DWC3_EP_PENDING_REQUEST ? 'P' : 'p', - __entry->flags & DWC3_EP_MISSED_ISOC ? 'M' : 'm', __entry->flags & DWC3_EP_END_TRANSFER_PENDING ? 'E' : 'e', __entry->direction ? '<' : '>' ) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 63a7cb87514a..f242c2bcea81 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1601,7 +1601,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) cdev->gadget->ep0->maxpacket; if (gadget_is_superspeed(gadget)) { if (gadget->speed >= USB_SPEED_SUPER) { - cdev->desc.bcdUSB = cpu_to_le16(0x0310); + cdev->desc.bcdUSB = cpu_to_le16(0x0320); cdev->desc.bMaxPacketSize0 = 9; } else { cdev->desc.bcdUSB = cpu_to_le16(0x0210); diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c index b104ed0c1ab5..6ce044008cf6 100644 --- a/drivers/usb/gadget/function/f_ecm.c +++ b/drivers/usb/gadget/function/f_ecm.c @@ -705,6 +705,8 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f) ecm_opts->bound = true; } + ecm_string_defs[1].s = ecm->ethaddr; + us = usb_gstrings_attach(cdev, ecm_strings, ARRAY_SIZE(ecm_string_defs)); if (IS_ERR(us)) @@ -928,7 +930,6 @@ static struct usb_function *ecm_alloc(struct usb_function_instance *fi) mutex_unlock(&opts->lock); return ERR_PTR(-EINVAL); } - ecm_string_defs[1].s = ecm->ethaddr; ecm->port.ioport = netdev_priv(opts->net); mutex_unlock(&opts->lock); diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 0294e4f18873..199d25700050 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -1266,6 +1266,14 @@ static long ffs_epfile_ioctl(struct file *file, unsigned code, return ret; } +#ifdef CONFIG_COMPAT +static long ffs_epfile_compat_ioctl(struct file *file, unsigned code, + unsigned long value) +{ + return ffs_epfile_ioctl(file, code, value); +} +#endif + static const struct file_operations ffs_epfile_operations = { .llseek = no_llseek, @@ -1274,6 +1282,9 @@ static const struct file_operations ffs_epfile_operations = { .read_iter = ffs_epfile_read_iter, .release = ffs_epfile_release, .unlocked_ioctl = ffs_epfile_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = ffs_epfile_compat_ioctl, +#endif }; diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index e8f35db42394..f80699747ee0 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -109,6 +109,7 @@ static inline struct f_midi *func_to_midi(struct usb_function *f) static void f_midi_transmit(struct f_midi *midi); static void f_midi_rmidi_free(struct snd_rawmidi *rmidi); +static void f_midi_free_inst(struct usb_function_instance *f); DECLARE_UAC_AC_HEADER_DESCRIPTOR(1); DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); @@ -1102,7 +1103,7 @@ static ssize_t f_midi_opts_##name##_store(struct config_item *item, \ u32 num; \ \ mutex_lock(&opts->lock); \ - if (opts->refcnt) { \ + if (opts->refcnt > 1) { \ ret = -EBUSY; \ goto end; \ } \ @@ -1157,7 +1158,7 @@ static ssize_t f_midi_opts_id_store(struct config_item *item, char *c; mutex_lock(&opts->lock); - if (opts->refcnt) { + if (opts->refcnt > 1) { ret = -EBUSY; goto end; } @@ -1198,13 +1199,21 @@ static const struct config_item_type midi_func_type = { static void f_midi_free_inst(struct usb_function_instance *f) { struct f_midi_opts *opts; + bool free = false; opts = container_of(f, struct f_midi_opts, func_inst); - if (opts->id_allocated) - kfree(opts->id); + mutex_lock(&opts->lock); + if (!--opts->refcnt) { + free = true; + } + mutex_unlock(&opts->lock); - kfree(opts); + if (free) { + if (opts->id_allocated) + kfree(opts->id); + kfree(opts); + } } static struct usb_function_instance *f_midi_alloc_inst(void) @@ -1223,6 +1232,7 @@ static struct usb_function_instance *f_midi_alloc_inst(void) opts->qlen = 32; opts->in_ports = 1; opts->out_ports = 1; + opts->refcnt = 1; config_group_init_type_name(&opts->func_inst.group, "", &midi_func_type); @@ -1234,6 +1244,7 @@ static void f_midi_free(struct usb_function *f) { struct f_midi *midi; struct f_midi_opts *opts; + bool free = false; midi = func_to_midi(f); opts = container_of(f->fi, struct f_midi_opts, func_inst); @@ -1242,9 +1253,12 @@ static void f_midi_free(struct usb_function *f) kfree(midi->id); kfifo_free(&midi->in_req_fifo); kfree(midi); - --opts->refcnt; + free = true; } mutex_unlock(&opts->lock); + + if (free) + f_midi_free_inst(&opts->func_inst); } static void f_midi_rmidi_free(struct snd_rawmidi *rmidi) diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c index d359efe06c76..9c7ed2539ff7 100644 --- a/drivers/usb/gadget/function/f_printer.c +++ b/drivers/usb/gadget/function/f_printer.c @@ -631,19 +631,19 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) return -EAGAIN; } + list_add(&req->list, &dev->tx_reqs_active); + /* here, we unlock, and only unlock, to avoid deadlock. */ spin_unlock(&dev->lock); value = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC); spin_lock(&dev->lock); if (value) { + list_del(&req->list); list_add(&req->list, &dev->tx_reqs); spin_unlock_irqrestore(&dev->lock, flags); mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } - - list_add(&req->list, &dev->tx_reqs_active); - } spin_unlock_irqrestore(&dev->lock, flags); diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c index 51dd3e90b06c..04c142c13075 100644 --- a/drivers/usb/gadget/function/rndis.c +++ b/drivers/usb/gadget/function/rndis.c @@ -851,6 +851,9 @@ int rndis_msg_parser(struct rndis_params *params, u8 *buf) */ pr_warn("%s: unknown RNDIS message 0x%08X len %d\n", __func__, MsgType, MsgLength); + /* Garbled message can be huge, so limit what we display */ + if (MsgLength > 16) + MsgLength = 16; print_hex_dump_bytes(__func__, DUMP_PREFIX_OFFSET, buf, MsgLength); break; diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 6fcda62f55ea..1000d864929c 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -844,6 +844,10 @@ struct net_device *gether_setup_name_default(const char *netname) net->ethtool_ops = &ops; SET_NETDEV_DEVTYPE(net, &gadget_type); + /* MTU range: 14 - 15412 */ + net->min_mtu = ETH_HLEN; + net->max_mtu = GETHER_MAX_ETH_FRAME_LEN; + return net; } EXPORT_SYMBOL_GPL(gether_setup_name_default); diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 0875d38476ee..1df4dedffe86 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -179,7 +179,7 @@ config USB_R8A66597 config USB_RENESAS_USBHS_UDC tristate 'Renesas USBHS controller' - depends on USB_RENESAS_USBHS && HAS_DMA + depends on USB_RENESAS_USBHS help Renesas USBHS is a discrete USB host and peripheral controller chip that supports both full and high speed USB 2.0 data transfers. @@ -192,7 +192,7 @@ config USB_RENESAS_USBHS_UDC config USB_RENESAS_USB3 tristate 'Renesas USB3.0 Peripheral controller' depends on ARCH_RENESAS || COMPILE_TEST - depends on EXTCON && HAS_DMA + depends on EXTCON help Renesas USB3.0 Peripheral controller is a USB peripheral controller that supports super, high, and full speed USB 3.0 data transfers. @@ -438,6 +438,8 @@ config USB_GADGET_XILINX dynamically linked module called "udc-xilinx" and force all gadget drivers to also be dynamically linked. +source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig" + # # LAST -- dummy/emulated controller # diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile index ce865b129fd6..897f648f3cf1 100644 --- a/drivers/usb/gadget/udc/Makefile +++ b/drivers/usb/gadget/udc/Makefile @@ -39,4 +39,5 @@ obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o obj-$(CONFIG_USB_GR_UDC) += gr_udc.o obj-$(CONFIG_USB_GADGET_XILINX) += udc-xilinx.o obj-$(CONFIG_USB_SNP_UDC_PLAT) += snps_udc_plat.o +obj-$(CONFIG_USB_ASPEED_VHUB) += aspeed-vhub/ obj-$(CONFIG_USB_BDC_UDC) += bdc/ diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Kconfig b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig new file mode 100644 index 000000000000..f0cdf89b8503 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0+ +config USB_ASPEED_VHUB + tristate "Aspeed vHub UDC driver" + depends on ARCH_ASPEED || COMPILE_TEST + help + USB peripheral controller for the Aspeed AST2500 family + SoCs supporting the "vHub" functionality and USB2.0 diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Makefile b/drivers/usb/gadget/udc/aspeed-vhub/Makefile new file mode 100644 index 000000000000..9f3add605f8e --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0+ +obj-$(CONFIG_USB_ASPEED_VHUB) += aspeed-vhub.o +aspeed-vhub-y := core.o ep0.o epn.o dev.o hub.o + diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c new file mode 100644 index 000000000000..db3628be38c0 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * core.c - Top level support + * + * Copyright 2017 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> + +#include "vhub.h" + +void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req, + int status) +{ + bool internal = req->internal; + + EPVDBG(ep, "completing request @%p, status %d\n", req, status); + + list_del_init(&req->queue); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + + if (req->req.dma) { + if (!WARN_ON(!ep->dev)) + usb_gadget_unmap_request(&ep->dev->gadget, + &req->req, ep->epn.is_in); + req->req.dma = 0; + } + + /* + * If this isn't an internal EP0 request, call the core + * to call the gadget completion. + */ + if (!internal) { + spin_unlock(&ep->vhub->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&ep->vhub->lock); + } +} + +void ast_vhub_nuke(struct ast_vhub_ep *ep, int status) +{ + struct ast_vhub_req *req; + + EPDBG(ep, "Nuking\n"); + + /* Beware, lock will be dropped & req-acquired by done() */ + while (!list_empty(&ep->queue)) { + req = list_first_entry(&ep->queue, struct ast_vhub_req, queue); + ast_vhub_done(ep, req, status); + } +} + +struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep, + gfp_t gfp_flags) +{ + struct ast_vhub_req *req; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + return &req->req; +} + +void ast_vhub_free_request(struct usb_ep *u_ep, struct usb_request *u_req) +{ + struct ast_vhub_req *req = to_ast_req(u_req); + + kfree(req); +} + +static irqreturn_t ast_vhub_irq(int irq, void *data) +{ + struct ast_vhub *vhub = data; + irqreturn_t iret = IRQ_NONE; + u32 istat; + + /* Stale interrupt while tearing down */ + if (!vhub->ep0_bufs) + return IRQ_NONE; + + spin_lock(&vhub->lock); + + /* Read and ACK interrupts */ + istat = readl(vhub->regs + AST_VHUB_ISR); + if (!istat) + goto bail; + writel(istat, vhub->regs + AST_VHUB_ISR); + iret = IRQ_HANDLED; + + UDCVDBG(vhub, "irq status=%08x, ep_acks=%08x ep_nacks=%08x\n", + istat, + readl(vhub->regs + AST_VHUB_EP_ACK_ISR), + readl(vhub->regs + AST_VHUB_EP_NACK_ISR)); + + /* Handle generic EPs first */ + if (istat & VHUB_IRQ_EP_POOL_ACK_STALL) { + u32 i, ep_acks = readl(vhub->regs + AST_VHUB_EP_ACK_ISR); + writel(ep_acks, vhub->regs + AST_VHUB_EP_ACK_ISR); + + for (i = 0; ep_acks && i < AST_VHUB_NUM_GEN_EPs; i++) { + u32 mask = VHUB_EP_IRQ(i); + if (ep_acks & mask) { + ast_vhub_epn_ack_irq(&vhub->epns[i]); + ep_acks &= ~mask; + } + } + } + + /* Handle device interrupts */ + if (istat & (VHUB_IRQ_DEVICE1 | + VHUB_IRQ_DEVICE2 | + VHUB_IRQ_DEVICE3 | + VHUB_IRQ_DEVICE4 | + VHUB_IRQ_DEVICE5)) { + if (istat & VHUB_IRQ_DEVICE1) + ast_vhub_dev_irq(&vhub->ports[0].dev); + if (istat & VHUB_IRQ_DEVICE2) + ast_vhub_dev_irq(&vhub->ports[1].dev); + if (istat & VHUB_IRQ_DEVICE3) + ast_vhub_dev_irq(&vhub->ports[2].dev); + if (istat & VHUB_IRQ_DEVICE4) + ast_vhub_dev_irq(&vhub->ports[3].dev); + if (istat & VHUB_IRQ_DEVICE5) + ast_vhub_dev_irq(&vhub->ports[4].dev); + } + + /* Handle top-level vHub EP0 interrupts */ + if (istat & (VHUB_IRQ_HUB_EP0_OUT_ACK_STALL | + VHUB_IRQ_HUB_EP0_IN_ACK_STALL | + VHUB_IRQ_HUB_EP0_SETUP)) { + if (istat & VHUB_IRQ_HUB_EP0_IN_ACK_STALL) + ast_vhub_ep0_handle_ack(&vhub->ep0, true); + if (istat & VHUB_IRQ_HUB_EP0_OUT_ACK_STALL) + ast_vhub_ep0_handle_ack(&vhub->ep0, false); + if (istat & VHUB_IRQ_HUB_EP0_SETUP) + ast_vhub_ep0_handle_setup(&vhub->ep0); + } + + /* Various top level bus events */ + if (istat & (VHUB_IRQ_BUS_RESUME | + VHUB_IRQ_BUS_SUSPEND | + VHUB_IRQ_BUS_RESET)) { + if (istat & VHUB_IRQ_BUS_RESUME) + ast_vhub_hub_resume(vhub); + if (istat & VHUB_IRQ_BUS_SUSPEND) + ast_vhub_hub_suspend(vhub); + if (istat & VHUB_IRQ_BUS_RESET) + ast_vhub_hub_reset(vhub); + } + + bail: + spin_unlock(&vhub->lock); + return iret; +} + +void ast_vhub_init_hw(struct ast_vhub *vhub) +{ + u32 ctrl; + + UDCDBG(vhub,"(Re)Starting HW ...\n"); + + /* Enable PHY */ + ctrl = VHUB_CTRL_PHY_CLK | + VHUB_CTRL_PHY_RESET_DIS; + + /* + * We do *NOT* set the VHUB_CTRL_CLK_STOP_SUSPEND bit + * to stop the logic clock during suspend because + * it causes the registers to become inaccessible and + * we haven't yet figured out a good wayt to bring the + * controller back into life to issue a wakeup. + */ + + /* + * Set some ISO & split control bits according to Aspeed + * recommendation + * + * VHUB_CTRL_ISO_RSP_CTRL: When set tells the HW to respond + * with 0 bytes data packet to ISO IN endpoints when no data + * is available. + * + * VHUB_CTRL_SPLIT_IN: This makes a SOF complete a split IN + * transaction. + */ + ctrl |= VHUB_CTRL_ISO_RSP_CTRL | VHUB_CTRL_SPLIT_IN; + writel(ctrl, vhub->regs + AST_VHUB_CTRL); + udelay(1); + + /* Set descriptor ring size */ + if (AST_VHUB_DESCS_COUNT == 256) { + ctrl |= VHUB_CTRL_LONG_DESC; + writel(ctrl, vhub->regs + AST_VHUB_CTRL); + } else { + BUILD_BUG_ON(AST_VHUB_DESCS_COUNT != 32); + } + + /* Reset all devices */ + writel(VHUB_SW_RESET_ALL, vhub->regs + AST_VHUB_SW_RESET); + udelay(1); + writel(0, vhub->regs + AST_VHUB_SW_RESET); + + /* Disable and cleanup EP ACK/NACK interrupts */ + writel(0, vhub->regs + AST_VHUB_EP_ACK_IER); + writel(0, vhub->regs + AST_VHUB_EP_NACK_IER); + writel(VHUB_EP_IRQ_ALL, vhub->regs + AST_VHUB_EP_ACK_ISR); + writel(VHUB_EP_IRQ_ALL, vhub->regs + AST_VHUB_EP_NACK_ISR); + + /* Default settings for EP0, enable HW hub EP1 */ + writel(0, vhub->regs + AST_VHUB_EP0_CTRL); + writel(VHUB_EP1_CTRL_RESET_TOGGLE | + VHUB_EP1_CTRL_ENABLE, + vhub->regs + AST_VHUB_EP1_CTRL); + writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG); + + /* Configure EP0 DMA buffer */ + writel(vhub->ep0.buf_dma, vhub->regs + AST_VHUB_EP0_DATA); + + /* Clear address */ + writel(0, vhub->regs + AST_VHUB_CONF); + + /* Pullup hub (activate on host) */ + if (vhub->force_usb1) + ctrl |= VHUB_CTRL_FULL_SPEED_ONLY; + + ctrl |= VHUB_CTRL_UPSTREAM_CONNECT; + writel(ctrl, vhub->regs + AST_VHUB_CTRL); + + /* Enable some interrupts */ + writel(VHUB_IRQ_HUB_EP0_IN_ACK_STALL | + VHUB_IRQ_HUB_EP0_OUT_ACK_STALL | + VHUB_IRQ_HUB_EP0_SETUP | + VHUB_IRQ_EP_POOL_ACK_STALL | + VHUB_IRQ_BUS_RESUME | + VHUB_IRQ_BUS_SUSPEND | + VHUB_IRQ_BUS_RESET, + vhub->regs + AST_VHUB_IER); +} + +static int ast_vhub_remove(struct platform_device *pdev) +{ + struct ast_vhub *vhub = platform_get_drvdata(pdev); + unsigned long flags; + int i; + + if (!vhub || !vhub->regs) + return 0; + + /* Remove devices */ + for (i = 0; i < AST_VHUB_NUM_PORTS; i++) + ast_vhub_del_dev(&vhub->ports[i].dev); + + spin_lock_irqsave(&vhub->lock, flags); + + /* Mask & ack all interrupts */ + writel(0, vhub->regs + AST_VHUB_IER); + writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR); + + /* Pull device, leave PHY enabled */ + writel(VHUB_CTRL_PHY_CLK | + VHUB_CTRL_PHY_RESET_DIS, + vhub->regs + AST_VHUB_CTRL); + + if (vhub->clk) + clk_disable_unprepare(vhub->clk); + + spin_unlock_irqrestore(&vhub->lock, flags); + + if (vhub->ep0_bufs) + dma_free_coherent(&pdev->dev, + AST_VHUB_EP0_MAX_PACKET * + (AST_VHUB_NUM_PORTS + 1), + vhub->ep0_bufs, + vhub->ep0_bufs_dma); + vhub->ep0_bufs = NULL; + + return 0; +} + +static int ast_vhub_probe(struct platform_device *pdev) +{ + enum usb_device_speed max_speed; + struct ast_vhub *vhub; + struct resource *res; + int i, rc = 0; + + vhub = devm_kzalloc(&pdev->dev, sizeof(*vhub), GFP_KERNEL); + if (!vhub) + return -ENOMEM; + + spin_lock_init(&vhub->lock); + vhub->pdev = pdev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + vhub->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(vhub->regs)) { + dev_err(&pdev->dev, "Failed to map resources\n"); + return PTR_ERR(vhub->regs); + } + UDCDBG(vhub, "vHub@%pR mapped @%p\n", res, vhub->regs); + + platform_set_drvdata(pdev, vhub); + + vhub->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(vhub->clk)) { + rc = PTR_ERR(vhub->clk); + goto err; + } + rc = clk_prepare_enable(vhub->clk); + if (rc) { + dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", rc); + goto err; + } + + /* Check if we need to limit the HW to USB1 */ + max_speed = usb_get_maximum_speed(&pdev->dev); + if (max_speed != USB_SPEED_UNKNOWN && max_speed < USB_SPEED_HIGH) + vhub->force_usb1 = true; + + /* Mask & ack all interrupts before installing the handler */ + writel(0, vhub->regs + AST_VHUB_IER); + writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR); + + /* Find interrupt and install handler */ + vhub->irq = platform_get_irq(pdev, 0); + if (vhub->irq < 0) { + dev_err(&pdev->dev, "Failed to get interrupt\n"); + rc = vhub->irq; + goto err; + } + rc = devm_request_irq(&pdev->dev, vhub->irq, ast_vhub_irq, 0, + KBUILD_MODNAME, vhub); + if (rc) { + dev_err(&pdev->dev, "Failed to request interrupt\n"); + goto err; + } + + /* + * Allocate DMA buffers for all EP0s in one chunk, + * one per port and one for the vHub itself + */ + vhub->ep0_bufs = dma_alloc_coherent(&pdev->dev, + AST_VHUB_EP0_MAX_PACKET * + (AST_VHUB_NUM_PORTS + 1), + &vhub->ep0_bufs_dma, GFP_KERNEL); + if (!vhub->ep0_bufs) { + dev_err(&pdev->dev, "Failed to allocate EP0 DMA buffers\n"); + rc = -ENOMEM; + goto err; + } + UDCVDBG(vhub, "EP0 DMA buffers @%p (DMA 0x%08x)\n", + vhub->ep0_bufs, (u32)vhub->ep0_bufs_dma); + + /* Init vHub EP0 */ + ast_vhub_init_ep0(vhub, &vhub->ep0, NULL); + + /* Init devices */ + for (i = 0; i < AST_VHUB_NUM_PORTS && rc == 0; i++) + rc = ast_vhub_init_dev(vhub, i); + if (rc) + goto err; + + /* Init hub emulation */ + ast_vhub_init_hub(vhub); + + /* Initialize HW */ + ast_vhub_init_hw(vhub); + + dev_info(&pdev->dev, "Initialized virtual hub in USB%d mode\n", + vhub->force_usb1 ? 1 : 2); + + return 0; + err: + ast_vhub_remove(pdev); + return rc; +} + +static const struct of_device_id ast_vhub_dt_ids[] = { + { + .compatible = "aspeed,ast2400-usb-vhub", + }, + { + .compatible = "aspeed,ast2500-usb-vhub", + }, + { } +}; +MODULE_DEVICE_TABLE(of, ast_vhub_dt_ids); + +static struct platform_driver ast_vhub_driver = { + .probe = ast_vhub_probe, + .remove = ast_vhub_remove, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = ast_vhub_dt_ids, + }, +}; +module_platform_driver(ast_vhub_driver); + +MODULE_DESCRIPTION("Aspeed vHub udc driver"); +MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c new file mode 100644 index 000000000000..f0233912bace --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c @@ -0,0 +1,589 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * dev.c - Individual device/gadget management (ie, a port = a gadget) + * + * Copyright 2017 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "vhub.h" + +void ast_vhub_dev_irq(struct ast_vhub_dev *d) +{ + u32 istat = readl(d->regs + AST_VHUB_DEV_ISR); + + writel(istat, d->regs + AST_VHUB_DEV_ISR); + + if (istat & VHUV_DEV_IRQ_EP0_IN_ACK_STALL) + ast_vhub_ep0_handle_ack(&d->ep0, true); + if (istat & VHUV_DEV_IRQ_EP0_OUT_ACK_STALL) + ast_vhub_ep0_handle_ack(&d->ep0, false); + if (istat & VHUV_DEV_IRQ_EP0_SETUP) + ast_vhub_ep0_handle_setup(&d->ep0); +} + +static void ast_vhub_dev_enable(struct ast_vhub_dev *d) +{ + u32 reg, hmsk; + + if (d->enabled) + return; + + /* Enable device and its EP0 interrupts */ + reg = VHUB_DEV_EN_ENABLE_PORT | + VHUB_DEV_EN_EP0_IN_ACK_IRQEN | + VHUB_DEV_EN_EP0_OUT_ACK_IRQEN | + VHUB_DEV_EN_EP0_SETUP_IRQEN; + if (d->gadget.speed == USB_SPEED_HIGH) + reg |= VHUB_DEV_EN_SPEED_SEL_HIGH; + writel(reg, d->regs + AST_VHUB_DEV_EN_CTRL); + + /* Enable device interrupt in the hub as well */ + hmsk = VHUB_IRQ_DEVICE1 << d->index; + reg = readl(d->vhub->regs + AST_VHUB_IER); + reg |= hmsk; + writel(reg, d->vhub->regs + AST_VHUB_IER); + + /* Set EP0 DMA buffer address */ + writel(d->ep0.buf_dma, d->regs + AST_VHUB_DEV_EP0_DATA); + + d->enabled = true; +} + +static void ast_vhub_dev_disable(struct ast_vhub_dev *d) +{ + u32 reg, hmsk; + + if (!d->enabled) + return; + + /* Disable device interrupt in the hub */ + hmsk = VHUB_IRQ_DEVICE1 << d->index; + reg = readl(d->vhub->regs + AST_VHUB_IER); + reg &= ~hmsk; + writel(reg, d->vhub->regs + AST_VHUB_IER); + + /* Then disable device */ + writel(0, d->regs + AST_VHUB_DEV_EN_CTRL); + d->gadget.speed = USB_SPEED_UNKNOWN; + d->enabled = false; + d->suspended = false; +} + +static int ast_vhub_dev_feature(struct ast_vhub_dev *d, + u16 wIndex, u16 wValue, + bool is_set) +{ + DDBG(d, "%s_FEATURE(dev val=%02x)\n", + is_set ? "SET" : "CLEAR", wValue); + + if (wValue != USB_DEVICE_REMOTE_WAKEUP) + return std_req_driver; + + d->wakeup_en = is_set; + + return std_req_complete; +} + +static int ast_vhub_ep_feature(struct ast_vhub_dev *d, + u16 wIndex, u16 wValue, bool is_set) +{ + struct ast_vhub_ep *ep; + int ep_num; + + ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + DDBG(d, "%s_FEATURE(ep%d val=%02x)\n", + is_set ? "SET" : "CLEAR", ep_num, wValue); + if (ep_num == 0) + return std_req_complete; + if (ep_num >= AST_VHUB_NUM_GEN_EPs || !d->epns[ep_num - 1]) + return std_req_stall; + if (wValue != USB_ENDPOINT_HALT) + return std_req_driver; + + ep = d->epns[ep_num - 1]; + if (WARN_ON(!ep)) + return std_req_stall; + + if (!ep->epn.enabled || !ep->ep.desc || ep->epn.is_iso || + ep->epn.is_in != !!(wIndex & USB_DIR_IN)) + return std_req_stall; + + DDBG(d, "%s stall on EP %d\n", + is_set ? "setting" : "clearing", ep_num); + ep->epn.stalled = is_set; + ast_vhub_update_epn_stall(ep); + + return std_req_complete; +} + +static int ast_vhub_dev_status(struct ast_vhub_dev *d, + u16 wIndex, u16 wValue) +{ + u8 st0; + + DDBG(d, "GET_STATUS(dev)\n"); + + st0 = d->gadget.is_selfpowered << USB_DEVICE_SELF_POWERED; + if (d->wakeup_en) + st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP; + + return ast_vhub_simple_reply(&d->ep0, st0, 0); +} + +static int ast_vhub_ep_status(struct ast_vhub_dev *d, + u16 wIndex, u16 wValue) +{ + int ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + struct ast_vhub_ep *ep; + u8 st0 = 0; + + DDBG(d, "GET_STATUS(ep%d)\n", ep_num); + + if (ep_num >= AST_VHUB_NUM_GEN_EPs) + return std_req_stall; + if (ep_num != 0) { + ep = d->epns[ep_num - 1]; + if (!ep) + return std_req_stall; + if (!ep->epn.enabled || !ep->ep.desc || ep->epn.is_iso || + ep->epn.is_in != !!(wIndex & USB_DIR_IN)) + return std_req_stall; + if (ep->epn.stalled) + st0 |= 1 << USB_ENDPOINT_HALT; + } + + return ast_vhub_simple_reply(&d->ep0, st0, 0); +} + +static void ast_vhub_dev_set_address(struct ast_vhub_dev *d, u8 addr) +{ + u32 reg; + + DDBG(d, "SET_ADDRESS: Got address %x\n", addr); + + reg = readl(d->regs + AST_VHUB_DEV_EN_CTRL); + reg &= ~VHUB_DEV_EN_ADDR_MASK; + reg |= VHUB_DEV_EN_SET_ADDR(addr); + writel(reg, d->regs + AST_VHUB_DEV_EN_CTRL); +} + +int ast_vhub_std_dev_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq) +{ + struct ast_vhub_dev *d = ep->dev; + u16 wValue, wIndex; + + /* No driver, we shouldn't be enabled ... */ + if (!d->driver || !d->enabled || d->suspended) { + EPDBG(ep, + "Device is wrong state driver=%p enabled=%d" + " suspended=%d\n", + d->driver, d->enabled, d->suspended); + return std_req_stall; + } + + /* First packet, grab speed */ + if (d->gadget.speed == USB_SPEED_UNKNOWN) { + d->gadget.speed = ep->vhub->speed; + if (d->gadget.speed > d->driver->max_speed) + d->gadget.speed = d->driver->max_speed; + DDBG(d, "fist packet, captured speed %d\n", + d->gadget.speed); + } + + wValue = le16_to_cpu(crq->wValue); + wIndex = le16_to_cpu(crq->wIndex); + + switch ((crq->bRequestType << 8) | crq->bRequest) { + /* SET_ADDRESS */ + case DeviceOutRequest | USB_REQ_SET_ADDRESS: + ast_vhub_dev_set_address(d, wValue); + return std_req_complete; + + /* GET_STATUS */ + case DeviceRequest | USB_REQ_GET_STATUS: + return ast_vhub_dev_status(d, wIndex, wValue); + case InterfaceRequest | USB_REQ_GET_STATUS: + return ast_vhub_simple_reply(ep, 0, 0); + case EndpointRequest | USB_REQ_GET_STATUS: + return ast_vhub_ep_status(d, wIndex, wValue); + + /* SET/CLEAR_FEATURE */ + case DeviceOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_dev_feature(d, wIndex, wValue, true); + case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_dev_feature(d, wIndex, wValue, false); + case EndpointOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_ep_feature(d, wIndex, wValue, true); + case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_ep_feature(d, wIndex, wValue, false); + } + return std_req_driver; +} + +static int ast_vhub_udc_wakeup(struct usb_gadget* gadget) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + unsigned long flags; + int rc = -EINVAL; + + spin_lock_irqsave(&d->vhub->lock, flags); + if (!d->wakeup_en) + goto err; + + DDBG(d, "Device initiated wakeup\n"); + + /* Wakeup the host */ + ast_vhub_hub_wake_all(d->vhub); + rc = 0; + err: + spin_unlock_irqrestore(&d->vhub->lock, flags); + return rc; +} + +static int ast_vhub_udc_get_frame(struct usb_gadget* gadget) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + + return (readl(d->vhub->regs + AST_VHUB_USBSTS) >> 16) & 0x7ff; +} + +static void ast_vhub_dev_nuke(struct ast_vhub_dev *d) +{ + unsigned int i; + + for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) { + if (!d->epns[i]) + continue; + ast_vhub_nuke(d->epns[i], -ESHUTDOWN); + } +} + +static int ast_vhub_udc_pullup(struct usb_gadget* gadget, int on) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + unsigned long flags; + + spin_lock_irqsave(&d->vhub->lock, flags); + + DDBG(d, "pullup(%d)\n", on); + + /* Mark disconnected in the hub */ + ast_vhub_device_connect(d->vhub, d->index, on); + + /* + * If enabled, nuke all requests if any (there shouldn't be) + * and disable the port. This will clear the address too. + */ + if (d->enabled) { + ast_vhub_dev_nuke(d); + ast_vhub_dev_disable(d); + } + + spin_unlock_irqrestore(&d->vhub->lock, flags); + + return 0; +} + +static int ast_vhub_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + unsigned long flags; + + spin_lock_irqsave(&d->vhub->lock, flags); + + DDBG(d, "start\n"); + + /* We don't do much more until the hub enables us */ + d->driver = driver; + d->gadget.is_selfpowered = 1; + + spin_unlock_irqrestore(&d->vhub->lock, flags); + + return 0; +} + +static struct usb_ep *ast_vhub_udc_match_ep(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ss) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + struct ast_vhub_ep *ep; + struct usb_ep *u_ep; + unsigned int max, addr, i; + + DDBG(d, "Match EP type %d\n", usb_endpoint_type(desc)); + + /* + * First we need to look for an existing unclaimed EP as another + * configuration may have already associated a bunch of EPs with + * this gadget. This duplicates the code in usb_ep_autoconfig_ss() + * unfortunately. + */ + list_for_each_entry(u_ep, &gadget->ep_list, ep_list) { + if (usb_gadget_ep_match_desc(gadget, u_ep, desc, ss)) { + DDBG(d, " -> using existing EP%d\n", + to_ast_ep(u_ep)->d_idx); + return u_ep; + } + } + + /* + * We didn't find one, we need to grab one from the pool. + * + * First let's do some sanity checking + */ + switch(usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + /* Only EP0 can be a control endpoint */ + return NULL; + case USB_ENDPOINT_XFER_ISOC: + /* ISO: limit 1023 bytes full speed, 1024 high/super speed */ + if (gadget_is_dualspeed(gadget)) + max = 1024; + else + max = 1023; + break; + case USB_ENDPOINT_XFER_BULK: + if (gadget_is_dualspeed(gadget)) + max = 512; + else + max = 64; + break; + case USB_ENDPOINT_XFER_INT: + if (gadget_is_dualspeed(gadget)) + max = 1024; + else + max = 64; + break; + } + if (usb_endpoint_maxp(desc) > max) + return NULL; + + /* + * Find a free EP address for that device. We can't + * let the generic code assign these as it would + * create overlapping numbers for IN and OUT which + * we don't support, so also create a suitable name + * that will allow the generic code to use our + * assigned address. + */ + for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) + if (d->epns[i] == NULL) + break; + if (i >= AST_VHUB_NUM_GEN_EPs) + return NULL; + addr = i + 1; + + /* + * Now grab an EP from the shared pool and associate + * it with our device + */ + ep = ast_vhub_alloc_epn(d, addr); + if (!ep) + return NULL; + DDBG(d, "Allocated epn#%d for port EP%d\n", + ep->epn.g_idx, addr); + + return &ep->ep; +} + +static int ast_vhub_udc_stop(struct usb_gadget *gadget) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + unsigned long flags; + + spin_lock_irqsave(&d->vhub->lock, flags); + + DDBG(d, "stop\n"); + + d->driver = NULL; + d->gadget.speed = USB_SPEED_UNKNOWN; + + ast_vhub_dev_nuke(d); + + if (d->enabled) + ast_vhub_dev_disable(d); + + spin_unlock_irqrestore(&d->vhub->lock, flags); + + return 0; +} + +static struct usb_gadget_ops ast_vhub_udc_ops = { + .get_frame = ast_vhub_udc_get_frame, + .wakeup = ast_vhub_udc_wakeup, + .pullup = ast_vhub_udc_pullup, + .udc_start = ast_vhub_udc_start, + .udc_stop = ast_vhub_udc_stop, + .match_ep = ast_vhub_udc_match_ep, +}; + +void ast_vhub_dev_suspend(struct ast_vhub_dev *d) +{ + d->suspended = true; + if (d->driver) { + spin_unlock(&d->vhub->lock); + d->driver->suspend(&d->gadget); + spin_lock(&d->vhub->lock); + } +} + +void ast_vhub_dev_resume(struct ast_vhub_dev *d) +{ + d->suspended = false; + if (d->driver) { + spin_unlock(&d->vhub->lock); + d->driver->resume(&d->gadget); + spin_lock(&d->vhub->lock); + } +} + +void ast_vhub_dev_reset(struct ast_vhub_dev *d) +{ + /* + * If speed is not set, we enable the port. If it is, + * send reset to the gadget and reset "speed". + * + * Speed is an indication that we have got the first + * setup packet to the device. + */ + if (d->gadget.speed == USB_SPEED_UNKNOWN && !d->enabled) { + DDBG(d, "Reset at unknown speed of disabled device, enabling...\n"); + ast_vhub_dev_enable(d); + d->suspended = false; + } + if (d->gadget.speed != USB_SPEED_UNKNOWN && d->driver) { + unsigned int i; + + DDBG(d, "Reset at known speed of bound device, resetting...\n"); + spin_unlock(&d->vhub->lock); + d->driver->reset(&d->gadget); + spin_lock(&d->vhub->lock); + + /* + * Disable/re-enable HW, this will clear the address + * and speed setting. + */ + ast_vhub_dev_disable(d); + ast_vhub_dev_enable(d); + + /* Clear stall on all EPs */ + for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) { + struct ast_vhub_ep *ep = d->epns[i]; + + if (ep && ep->epn.stalled) { + ep->epn.stalled = false; + ast_vhub_update_epn_stall(ep); + } + } + + /* Additional cleanups */ + d->wakeup_en = false; + d->suspended = false; + } +} + +void ast_vhub_del_dev(struct ast_vhub_dev *d) +{ + unsigned long flags; + + spin_lock_irqsave(&d->vhub->lock, flags); + if (!d->registered) { + spin_unlock_irqrestore(&d->vhub->lock, flags); + return; + } + d->registered = false; + spin_unlock_irqrestore(&d->vhub->lock, flags); + + usb_del_gadget_udc(&d->gadget); + device_unregister(d->port_dev); +} + +static void ast_vhub_dev_release(struct device *dev) +{ + kfree(dev); +} + +int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx) +{ + struct ast_vhub_dev *d = &vhub->ports[idx].dev; + struct device *parent = &vhub->pdev->dev; + int rc; + + d->vhub = vhub; + d->index = idx; + d->name = devm_kasprintf(parent, GFP_KERNEL, "port%d", idx+1); + d->regs = vhub->regs + 0x100 + 0x10 * idx; + + ast_vhub_init_ep0(vhub, &d->ep0, d); + + /* + * The UDC core really needs us to have separate and uniquely + * named "parent" devices for each port so we create a sub device + * here for that purpose + */ + d->port_dev = kzalloc(sizeof(struct device), GFP_KERNEL); + if (!d->port_dev) + return -ENOMEM; + device_initialize(d->port_dev); + d->port_dev->release = ast_vhub_dev_release; + d->port_dev->parent = parent; + dev_set_name(d->port_dev, "%s:p%d", dev_name(parent), idx + 1); + rc = device_add(d->port_dev); + if (rc) + goto fail_add; + + /* Populate gadget */ + INIT_LIST_HEAD(&d->gadget.ep_list); + d->gadget.ops = &ast_vhub_udc_ops; + d->gadget.ep0 = &d->ep0.ep; + d->gadget.name = KBUILD_MODNAME; + if (vhub->force_usb1) + d->gadget.max_speed = USB_SPEED_FULL; + else + d->gadget.max_speed = USB_SPEED_HIGH; + d->gadget.speed = USB_SPEED_UNKNOWN; + d->gadget.dev.of_node = vhub->pdev->dev.of_node; + + rc = usb_add_gadget_udc(d->port_dev, &d->gadget); + if (rc != 0) + goto fail_udc; + d->registered = true; + + return 0; + fail_udc: + device_del(d->port_dev); + fail_add: + put_device(d->port_dev); + + return rc; +} diff --git a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c new file mode 100644 index 000000000000..20ffb03ff6ac --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c @@ -0,0 +1,486 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * ep0.c - Endpoint 0 handling + * + * Copyright 2017 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> + +#include "vhub.h" + +int ast_vhub_reply(struct ast_vhub_ep *ep, char *ptr, int len) +{ + struct usb_request *req = &ep->ep0.req.req; + int rc; + + if (WARN_ON(ep->d_idx != 0)) + return std_req_stall; + if (WARN_ON(!ep->ep0.dir_in)) + return std_req_stall; + if (WARN_ON(len > AST_VHUB_EP0_MAX_PACKET)) + return std_req_stall; + if (WARN_ON(req->status == -EINPROGRESS)) + return std_req_stall; + + req->buf = ptr; + req->length = len; + req->complete = NULL; + req->zero = true; + + /* + * Call internal queue directly after dropping the lock. This is + * safe to do as the reply is always the last thing done when + * processing a SETUP packet, usually as a tail call + */ + spin_unlock(&ep->vhub->lock); + if (ep->ep.ops->queue(&ep->ep, req, GFP_ATOMIC)) + rc = std_req_stall; + else + rc = std_req_data; + spin_lock(&ep->vhub->lock); + return rc; +} + +int __ast_vhub_simple_reply(struct ast_vhub_ep *ep, int len, ...) +{ + u8 *buffer = ep->buf; + unsigned int i; + va_list args; + + va_start(args, len); + + /* Copy data directly into EP buffer */ + for (i = 0; i < len; i++) + buffer[i] = va_arg(args, int); + va_end(args); + + /* req->buf NULL means data is already there */ + return ast_vhub_reply(ep, NULL, len); +} + +void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep) +{ + struct usb_ctrlrequest crq; + enum std_req_rc std_req_rc; + int rc = -ENODEV; + + if (WARN_ON(ep->d_idx != 0)) + return; + + /* + * Grab the setup packet from the chip and byteswap + * interesting fields + */ + memcpy_fromio(&crq, ep->ep0.setup, sizeof(crq)); + + EPDBG(ep, "SETUP packet %02x/%02x/%04x/%04x/%04x [%s] st=%d\n", + crq.bRequestType, crq.bRequest, + le16_to_cpu(crq.wValue), + le16_to_cpu(crq.wIndex), + le16_to_cpu(crq.wLength), + (crq.bRequestType & USB_DIR_IN) ? "in" : "out", + ep->ep0.state); + + /* Check our state, cancel pending requests if needed */ + if (ep->ep0.state != ep0_state_token) { + EPDBG(ep, "wrong state\n"); + ast_vhub_nuke(ep, 0); + goto stall; + } + + /* Calculate next state for EP0 */ + ep->ep0.state = ep0_state_data; + ep->ep0.dir_in = !!(crq.bRequestType & USB_DIR_IN); + + /* If this is the vHub, we handle requests differently */ + std_req_rc = std_req_driver; + if (ep->dev == NULL) { + if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + std_req_rc = ast_vhub_std_hub_request(ep, &crq); + else if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) + std_req_rc = ast_vhub_class_hub_request(ep, &crq); + else + std_req_rc = std_req_stall; + } else if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + std_req_rc = ast_vhub_std_dev_request(ep, &crq); + + /* Act upon result */ + switch(std_req_rc) { + case std_req_complete: + goto complete; + case std_req_stall: + goto stall; + case std_req_driver: + break; + case std_req_data: + return; + } + + /* Pass request up to the gadget driver */ + if (WARN_ON(!ep->dev)) + goto stall; + if (ep->dev->driver) { + EPDBG(ep, "forwarding to gadget...\n"); + spin_unlock(&ep->vhub->lock); + rc = ep->dev->driver->setup(&ep->dev->gadget, &crq); + spin_lock(&ep->vhub->lock); + EPDBG(ep, "driver returned %d\n", rc); + } else { + EPDBG(ep, "no gadget for request !\n"); + } + if (rc >= 0) + return; + + stall: + EPDBG(ep, "stalling\n"); + writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat); + ep->ep0.state = ep0_state_status; + ep->ep0.dir_in = false; + return; + + complete: + EPVDBG(ep, "sending [in] status with no data\n"); + writel(VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat); + ep->ep0.state = ep0_state_status; + ep->ep0.dir_in = false; +} + + +static void ast_vhub_ep0_do_send(struct ast_vhub_ep *ep, + struct ast_vhub_req *req) +{ + unsigned int chunk; + u32 reg; + + /* If this is a 0-length request, it's the gadget trying to + * send a status on our behalf. We take it from here. + */ + if (req->req.length == 0) + req->last_desc = 1; + + /* Are we done ? Complete request, otherwise wait for next interrupt */ + if (req->last_desc >= 0) { + EPVDBG(ep, "complete send %d/%d\n", + req->req.actual, req->req.length); + ep->ep0.state = ep0_state_status; + writel(VHUB_EP0_RX_BUFF_RDY, ep->ep0.ctlstat); + ast_vhub_done(ep, req, 0); + return; + } + + /* + * Next chunk cropped to max packet size. Also check if this + * is the last packet + */ + chunk = req->req.length - req->req.actual; + if (chunk > ep->ep.maxpacket) + chunk = ep->ep.maxpacket; + else if ((chunk < ep->ep.maxpacket) || !req->req.zero) + req->last_desc = 1; + + EPVDBG(ep, "send chunk=%d last=%d, req->act=%d mp=%d\n", + chunk, req->last_desc, req->req.actual, ep->ep.maxpacket); + + /* + * Copy data if any (internal requests already have data + * in the EP buffer) + */ + if (chunk && req->req.buf) + memcpy(ep->buf, req->req.buf + req->req.actual, chunk); + + /* Remember chunk size and trigger send */ + reg = VHUB_EP0_SET_TX_LEN(chunk); + writel(reg, ep->ep0.ctlstat); + writel(reg | VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat); + req->req.actual += chunk; +} + +static void ast_vhub_ep0_rx_prime(struct ast_vhub_ep *ep) +{ + EPVDBG(ep, "rx prime\n"); + + /* Prime endpoint for receiving data */ + writel(VHUB_EP0_RX_BUFF_RDY, ep->ep0.ctlstat + AST_VHUB_EP0_CTRL); +} + +static void ast_vhub_ep0_do_receive(struct ast_vhub_ep *ep, struct ast_vhub_req *req, + unsigned int len) +{ + unsigned int remain; + int rc = 0; + + /* We are receiving... grab request */ + remain = req->req.length - req->req.actual; + + EPVDBG(ep, "receive got=%d remain=%d\n", len, remain); + + /* Are we getting more than asked ? */ + if (len > remain) { + EPDBG(ep, "receiving too much (ovf: %d) !\n", + len - remain); + len = remain; + rc = -EOVERFLOW; + } + if (len && req->req.buf) + memcpy(req->req.buf + req->req.actual, ep->buf, len); + req->req.actual += len; + + /* Done ? */ + if (len < ep->ep.maxpacket || len == remain) { + ep->ep0.state = ep0_state_status; + writel(VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat); + ast_vhub_done(ep, req, rc); + } else + ast_vhub_ep0_rx_prime(ep); +} + +void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack) +{ + struct ast_vhub_req *req; + struct ast_vhub *vhub = ep->vhub; + struct device *dev = &vhub->pdev->dev; + bool stall = false; + u32 stat; + + /* Read EP0 status */ + stat = readl(ep->ep0.ctlstat); + + /* Grab current request if any */ + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); + + EPVDBG(ep, "ACK status=%08x,state=%d is_in=%d in_ack=%d req=%p\n", + stat, ep->ep0.state, ep->ep0.dir_in, in_ack, req); + + switch(ep->ep0.state) { + case ep0_state_token: + /* There should be no request queued in that state... */ + if (req) { + dev_warn(dev, "request present while in TOKEN state\n"); + ast_vhub_nuke(ep, -EINVAL); + } + dev_warn(dev, "ack while in TOKEN state\n"); + stall = true; + break; + case ep0_state_data: + /* Check the state bits corresponding to our direction */ + if ((ep->ep0.dir_in && (stat & VHUB_EP0_TX_BUFF_RDY)) || + (!ep->ep0.dir_in && (stat & VHUB_EP0_RX_BUFF_RDY)) || + (ep->ep0.dir_in != in_ack)) { + dev_warn(dev, "irq state mismatch"); + stall = true; + break; + } + /* + * We are in data phase and there's no request, something is + * wrong, stall + */ + if (!req) { + dev_warn(dev, "data phase, no request\n"); + stall = true; + break; + } + + /* We have a request, handle data transfers */ + if (ep->ep0.dir_in) + ast_vhub_ep0_do_send(ep, req); + else + ast_vhub_ep0_do_receive(ep, req, VHUB_EP0_RX_LEN(stat)); + return; + case ep0_state_status: + /* Nuke stale requests */ + if (req) { + dev_warn(dev, "request present while in STATUS state\n"); + ast_vhub_nuke(ep, -EINVAL); + } + + /* + * If the status phase completes with the wrong ack, stall + * the endpoint just in case, to abort whatever the host + * was doing. + */ + if (ep->ep0.dir_in == in_ack) { + dev_warn(dev, "status direction mismatch\n"); + stall = true; + } + } + + /* Reset to token state */ + ep->ep0.state = ep0_state_token; + if (stall) + writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat); +} + +static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req, + gfp_t gfp_flags) +{ + struct ast_vhub_req *req = to_ast_req(u_req); + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + struct device *dev = &vhub->pdev->dev; + unsigned long flags; + + /* Paranoid cheks */ + if (!u_req || (!u_req->complete && !req->internal)) { + dev_warn(dev, "Bogus EP0 request ! u_req=%p\n", u_req); + if (u_req) { + dev_warn(dev, "complete=%p internal=%d\n", + u_req->complete, req->internal); + } + return -EINVAL; + } + + /* Not endpoint 0 ? */ + if (WARN_ON(ep->d_idx != 0)) + return -EINVAL; + + /* Disabled device */ + if (ep->dev && (!ep->dev->enabled || ep->dev->suspended)) + return -ESHUTDOWN; + + /* Data, no buffer and not internal ? */ + if (u_req->length && !u_req->buf && !req->internal) { + dev_warn(dev, "Request with no buffer !\n"); + return -EINVAL; + } + + EPVDBG(ep, "enqueue req @%p\n", req); + EPVDBG(ep, " l=%d zero=%d noshort=%d is_in=%d\n", + u_req->length, u_req->zero, + u_req->short_not_ok, ep->ep0.dir_in); + + /* Initialize request progress fields */ + u_req->status = -EINPROGRESS; + u_req->actual = 0; + req->last_desc = -1; + req->active = false; + + spin_lock_irqsave(&vhub->lock, flags); + + /* EP0 can only support a single request at a time */ + if (!list_empty(&ep->queue) || ep->ep0.state == ep0_state_token) { + dev_warn(dev, "EP0: Request in wrong state\n"); + spin_unlock_irqrestore(&vhub->lock, flags); + return -EBUSY; + } + + /* Add request to list and kick processing if empty */ + list_add_tail(&req->queue, &ep->queue); + + if (ep->ep0.dir_in) { + /* IN request, send data */ + ast_vhub_ep0_do_send(ep, req); + } else if (u_req->length == 0) { + /* 0-len request, send completion as rx */ + EPVDBG(ep, "0-length rx completion\n"); + ep->ep0.state = ep0_state_status; + writel(VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat); + ast_vhub_done(ep, req, 0); + } else { + /* OUT request, start receiver */ + ast_vhub_ep0_rx_prime(ep); + } + + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static int ast_vhub_ep0_dequeue(struct usb_ep* u_ep, struct usb_request *u_req) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_req *req; + unsigned long flags; + int rc = -EINVAL; + + spin_lock_irqsave(&vhub->lock, flags); + + /* Only one request can be in the queue */ + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); + + /* Is it ours ? */ + if (req && u_req == &req->req) { + EPVDBG(ep, "dequeue req @%p\n", req); + + /* + * We don't have to deal with "active" as all + * DMAs go to the EP buffers, not the request. + */ + ast_vhub_done(ep, req, -ECONNRESET); + + /* We do stall the EP to clean things up in HW */ + writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat); + ep->ep0.state = ep0_state_status; + ep->ep0.dir_in = false; + rc = 0; + } + spin_unlock_irqrestore(&vhub->lock, flags); + return rc; +} + + +static const struct usb_ep_ops ast_vhub_ep0_ops = { + .queue = ast_vhub_ep0_queue, + .dequeue = ast_vhub_ep0_dequeue, + .alloc_request = ast_vhub_alloc_request, + .free_request = ast_vhub_free_request, +}; + +void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep, + struct ast_vhub_dev *dev) +{ + memset(ep, 0, sizeof(*ep)); + + INIT_LIST_HEAD(&ep->ep.ep_list); + INIT_LIST_HEAD(&ep->queue); + ep->ep.ops = &ast_vhub_ep0_ops; + ep->ep.name = "ep0"; + ep->ep.caps.type_control = true; + usb_ep_set_maxpacket_limit(&ep->ep, AST_VHUB_EP0_MAX_PACKET); + ep->d_idx = 0; + ep->dev = dev; + ep->vhub = vhub; + ep->ep0.state = ep0_state_token; + INIT_LIST_HEAD(&ep->ep0.req.queue); + ep->ep0.req.internal = true; + + /* Small difference between vHub and devices */ + if (dev) { + ep->ep0.ctlstat = dev->regs + AST_VHUB_DEV_EP0_CTRL; + ep->ep0.setup = vhub->regs + + AST_VHUB_SETUP0 + 8 * (dev->index + 1); + ep->buf = vhub->ep0_bufs + + AST_VHUB_EP0_MAX_PACKET * (dev->index + 1); + ep->buf_dma = vhub->ep0_bufs_dma + + AST_VHUB_EP0_MAX_PACKET * (dev->index + 1); + } else { + ep->ep0.ctlstat = vhub->regs + AST_VHUB_EP0_CTRL; + ep->ep0.setup = vhub->regs + AST_VHUB_SETUP0; + ep->buf = vhub->ep0_bufs; + ep->buf_dma = vhub->ep0_bufs_dma; + } +} diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c new file mode 100644 index 000000000000..80c9feac5147 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c @@ -0,0 +1,843 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * epn.c - Generic endpoints management + * + * Copyright 2017 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> + +#include "vhub.h" + +#define EXTRA_CHECKS + +#ifdef EXTRA_CHECKS +#define CHECK(ep, expr, fmt...) \ + do { \ + if (!(expr)) EPDBG(ep, "CHECK:" fmt); \ + } while(0) +#else +#define CHECK(ep, expr, fmt...) do { } while(0) +#endif + +static void ast_vhub_epn_kick(struct ast_vhub_ep *ep, struct ast_vhub_req *req) +{ + unsigned int act = req->req.actual; + unsigned int len = req->req.length; + unsigned int chunk; + + /* There should be no DMA ongoing */ + WARN_ON(req->active); + + /* Calculate next chunk size */ + chunk = len - act; + if (chunk > ep->ep.maxpacket) + chunk = ep->ep.maxpacket; + else if ((chunk < ep->ep.maxpacket) || !req->req.zero) + req->last_desc = 1; + + EPVDBG(ep, "kick req %p act=%d/%d chunk=%d last=%d\n", + req, act, len, chunk, req->last_desc); + + /* If DMA unavailable, using staging EP buffer */ + if (!req->req.dma) { + + /* For IN transfers, copy data over first */ + if (ep->epn.is_in) + memcpy(ep->buf, req->req.buf + act, chunk); + writel(ep->buf_dma, ep->epn.regs + AST_VHUB_EP_DESC_BASE); + } else + writel(req->req.dma + act, ep->epn.regs + AST_VHUB_EP_DESC_BASE); + + /* Start DMA */ + req->active = true; + writel(VHUB_EP_DMA_SET_TX_SIZE(chunk), + ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + writel(VHUB_EP_DMA_SET_TX_SIZE(chunk) | VHUB_EP_DMA_SINGLE_KICK, + ep->epn.regs + AST_VHUB_EP_DESC_STATUS); +} + +static void ast_vhub_epn_handle_ack(struct ast_vhub_ep *ep) +{ + struct ast_vhub_req *req; + unsigned int len; + u32 stat; + + /* Read EP status */ + stat = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + + /* Grab current request if any */ + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); + + EPVDBG(ep, "ACK status=%08x is_in=%d, req=%p (active=%d)\n", + stat, ep->epn.is_in, req, req ? req->active : 0); + + /* In absence of a request, bail out, must have been dequeued */ + if (!req) + return; + + /* + * Request not active, move on to processing queue, active request + * was probably dequeued + */ + if (!req->active) + goto next_chunk; + + /* Check if HW has moved on */ + if (VHUB_EP_DMA_RPTR(stat) != 0) { + EPDBG(ep, "DMA read pointer not 0 !\n"); + return; + } + + /* No current DMA ongoing */ + req->active = false; + + /* Grab lenght out of HW */ + len = VHUB_EP_DMA_TX_SIZE(stat); + + /* If not using DMA, copy data out if needed */ + if (!req->req.dma && !ep->epn.is_in && len) + memcpy(req->req.buf + req->req.actual, ep->buf, len); + + /* Adjust size */ + req->req.actual += len; + + /* Check for short packet */ + if (len < ep->ep.maxpacket) + req->last_desc = 1; + + /* That's it ? complete the request and pick a new one */ + if (req->last_desc >= 0) { + ast_vhub_done(ep, req, 0); + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, + queue); + + /* + * Due to lock dropping inside "done" the next request could + * already be active, so check for that and bail if needed. + */ + if (!req || req->active) + return; + } + + next_chunk: + ast_vhub_epn_kick(ep, req); +} + +static inline unsigned int ast_vhub_count_free_descs(struct ast_vhub_ep *ep) +{ + /* + * d_next == d_last means descriptor list empty to HW, + * thus we can only have AST_VHUB_DESCS_COUNT-1 descriptors + * in the list + */ + return (ep->epn.d_last + AST_VHUB_DESCS_COUNT - ep->epn.d_next - 1) & + (AST_VHUB_DESCS_COUNT - 1); +} + +static void ast_vhub_epn_kick_desc(struct ast_vhub_ep *ep, + struct ast_vhub_req *req) +{ + unsigned int act = req->act_count; + unsigned int len = req->req.length; + unsigned int chunk; + + /* Mark request active if not already */ + req->active = true; + + /* If the request was already completely written, do nothing */ + if (req->last_desc >= 0) + return; + + EPVDBG(ep, "kick act=%d/%d chunk_max=%d free_descs=%d\n", + act, len, ep->epn.chunk_max, ast_vhub_count_free_descs(ep)); + + /* While we can create descriptors */ + while (ast_vhub_count_free_descs(ep) && req->last_desc < 0) { + struct ast_vhub_desc *desc; + unsigned int d_num; + + /* Grab next free descriptor */ + d_num = ep->epn.d_next; + desc = &ep->epn.descs[d_num]; + ep->epn.d_next = (d_num + 1) & (AST_VHUB_DESCS_COUNT - 1); + + /* Calculate next chunk size */ + chunk = len - act; + if (chunk <= ep->epn.chunk_max) { + /* + * Is this the last packet ? Because of having up to 8 + * packets in a descriptor we can't just compare "chunk" + * with ep.maxpacket. We have to see if it's a multiple + * of it to know if we have to send a zero packet. + * Sadly that involves a modulo which is a bit expensive + * but probably still better than not doing it. + */ + if (!chunk || !req->req.zero || (chunk % ep->ep.maxpacket) != 0) + req->last_desc = d_num; + } else { + chunk = ep->epn.chunk_max; + } + + EPVDBG(ep, " chunk: act=%d/%d chunk=%d last=%d desc=%d free=%d\n", + act, len, chunk, req->last_desc, d_num, + ast_vhub_count_free_descs(ep)); + + /* Populate descriptor */ + desc->w0 = cpu_to_le32(req->req.dma + act); + + /* Interrupt if end of request or no more descriptors */ + + /* + * TODO: Be smarter about it, if we don't have enough + * descriptors request an interrupt before queue empty + * or so in order to be able to populate more before + * the HW runs out. This isn't a problem at the moment + * as we use 256 descriptors and only put at most one + * request in the ring. + */ + desc->w1 = cpu_to_le32(VHUB_DSC1_IN_SET_LEN(chunk)); + if (req->last_desc >= 0 || !ast_vhub_count_free_descs(ep)) + desc->w1 |= cpu_to_le32(VHUB_DSC1_IN_INTERRUPT); + + /* Account packet */ + req->act_count = act = act + chunk; + } + + /* Tell HW about new descriptors */ + writel(VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next), + ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + + EPVDBG(ep, "HW kicked, d_next=%d dstat=%08x\n", + ep->epn.d_next, readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS)); +} + +static void ast_vhub_epn_handle_ack_desc(struct ast_vhub_ep *ep) +{ + struct ast_vhub_req *req; + unsigned int len, d_last; + u32 stat, stat1; + + /* Read EP status, workaround HW race */ + do { + stat = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + stat1 = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + } while(stat != stat1); + + /* Extract RPTR */ + d_last = VHUB_EP_DMA_RPTR(stat); + + /* Grab current request if any */ + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); + + EPVDBG(ep, "ACK status=%08x is_in=%d ep->d_last=%d..%d\n", + stat, ep->epn.is_in, ep->epn.d_last, d_last); + + /* Check all completed descriptors */ + while (ep->epn.d_last != d_last) { + struct ast_vhub_desc *desc; + unsigned int d_num; + bool is_last_desc; + + /* Grab next completed descriptor */ + d_num = ep->epn.d_last; + desc = &ep->epn.descs[d_num]; + ep->epn.d_last = (d_num + 1) & (AST_VHUB_DESCS_COUNT - 1); + + /* Grab len out of descriptor */ + len = VHUB_DSC1_IN_LEN(le32_to_cpu(desc->w1)); + + EPVDBG(ep, " desc %d len=%d req=%p (act=%d)\n", + d_num, len, req, req ? req->active : 0); + + /* If no active request pending, move on */ + if (!req || !req->active) + continue; + + /* Adjust size */ + req->req.actual += len; + + /* Is that the last chunk ? */ + is_last_desc = req->last_desc == d_num; + CHECK(ep, is_last_desc == (len < ep->ep.maxpacket || + (req->req.actual >= req->req.length && + !req->req.zero)), + "Last packet discrepancy: last_desc=%d len=%d r.act=%d " + "r.len=%d r.zero=%d mp=%d\n", + is_last_desc, len, req->req.actual, req->req.length, + req->req.zero, ep->ep.maxpacket); + + if (is_last_desc) { + /* + * Because we can only have one request at a time + * in our descriptor list in this implementation, + * d_last and ep->d_last should now be equal + */ + CHECK(ep, d_last == ep->epn.d_last, + "DMA read ptr mismatch %d vs %d\n", + d_last, ep->epn.d_last); + + /* Note: done will drop and re-acquire the lock */ + ast_vhub_done(ep, req, 0); + req = list_first_entry_or_null(&ep->queue, + struct ast_vhub_req, + queue); + break; + } + } + + /* More work ? */ + if (req) + ast_vhub_epn_kick_desc(ep, req); +} + +void ast_vhub_epn_ack_irq(struct ast_vhub_ep *ep) +{ + if (ep->epn.desc_mode) + ast_vhub_epn_handle_ack_desc(ep); + else + ast_vhub_epn_handle_ack(ep); +} + +static int ast_vhub_epn_queue(struct usb_ep* u_ep, struct usb_request *u_req, + gfp_t gfp_flags) +{ + struct ast_vhub_req *req = to_ast_req(u_req); + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + unsigned long flags; + bool empty; + int rc; + + /* Paranoid checks */ + if (!u_req || !u_req->complete || !u_req->buf) { + dev_warn(&vhub->pdev->dev, "Bogus EPn request ! u_req=%p\n", u_req); + if (u_req) { + dev_warn(&vhub->pdev->dev, "complete=%p internal=%d\n", + u_req->complete, req->internal); + } + return -EINVAL; + } + + /* Endpoint enabled ? */ + if (!ep->epn.enabled || !u_ep->desc || !ep->dev || !ep->d_idx || + !ep->dev->enabled || ep->dev->suspended) { + EPDBG(ep,"Enqueing request on wrong or disabled EP\n"); + return -ESHUTDOWN; + } + + /* Map request for DMA if possible. For now, the rule for DMA is + * that: + * + * * For single stage mode (no descriptors): + * + * - The buffer is aligned to a 8 bytes boundary (HW requirement) + * - For a OUT endpoint, the request size is a multiple of the EP + * packet size (otherwise the controller will DMA past the end + * of the buffer if the host is sending a too long packet). + * + * * For descriptor mode (tx only for now), always. + * + * We could relax the latter by making the decision to use the bounce + * buffer based on the size of a given *segment* of the request rather + * than the whole request. + */ + if (ep->epn.desc_mode || + ((((unsigned long)u_req->buf & 7) == 0) && + (ep->epn.is_in || !(u_req->length & (u_ep->maxpacket - 1))))) { + rc = usb_gadget_map_request(&ep->dev->gadget, u_req, + ep->epn.is_in); + if (rc) { + dev_warn(&vhub->pdev->dev, + "Request mapping failure %d\n", rc); + return rc; + } + } else + u_req->dma = 0; + + EPVDBG(ep, "enqueue req @%p\n", req); + EPVDBG(ep, " l=%d dma=0x%x zero=%d noshort=%d noirq=%d is_in=%d\n", + u_req->length, (u32)u_req->dma, u_req->zero, + u_req->short_not_ok, u_req->no_interrupt, + ep->epn.is_in); + + /* Initialize request progress fields */ + u_req->status = -EINPROGRESS; + u_req->actual = 0; + req->act_count = 0; + req->active = false; + req->last_desc = -1; + spin_lock_irqsave(&vhub->lock, flags); + empty = list_empty(&ep->queue); + + /* Add request to list and kick processing if empty */ + list_add_tail(&req->queue, &ep->queue); + if (empty) { + if (ep->epn.desc_mode) + ast_vhub_epn_kick_desc(ep, req); + else + ast_vhub_epn_kick(ep, req); + } + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep, + bool restart_ep) +{ + u32 state, reg, loops; + + /* Stop DMA activity */ + writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + + /* Wait for it to complete */ + for (loops = 0; loops < 1000; loops++) { + state = readl(ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + state = VHUB_EP_DMA_PROC_STATUS(state); + if (state == EP_DMA_PROC_RX_IDLE || + state == EP_DMA_PROC_TX_IDLE) + break; + udelay(1); + } + if (loops >= 1000) + dev_warn(&ep->vhub->pdev->dev, "Timeout waiting for DMA\n"); + + /* If we don't have to restart the endpoint, that's it */ + if (!restart_ep) + return; + + /* Restart the endpoint */ + if (ep->epn.desc_mode) { + /* + * Take out descriptors by resetting the DMA read + * pointer to be equal to the CPU write pointer. + * + * Note: If we ever support creating descriptors for + * requests that aren't the head of the queue, we + * may have to do something more complex here, + * especially if the request being taken out is + * not the current head descriptors. + */ + reg = VHUB_EP_DMA_SET_RPTR(ep->epn.d_next) | + VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next); + writel(reg, ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + + /* Then turn it back on */ + writel(ep->epn.dma_conf, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + } else { + /* Single mode: just turn it back on */ + writel(ep->epn.dma_conf, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + } +} + +static int ast_vhub_epn_dequeue(struct usb_ep* u_ep, struct usb_request *u_req) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_req *req; + unsigned long flags; + int rc = -EINVAL; + + spin_lock_irqsave(&vhub->lock, flags); + + /* Make sure it's actually queued on this endpoint */ + list_for_each_entry (req, &ep->queue, queue) { + if (&req->req == u_req) + break; + } + + if (&req->req == u_req) { + EPVDBG(ep, "dequeue req @%p active=%d\n", + req, req->active); + if (req->active) + ast_vhub_stop_active_req(ep, true); + ast_vhub_done(ep, req, -ECONNRESET); + rc = 0; + } + + spin_unlock_irqrestore(&vhub->lock, flags); + return rc; +} + +void ast_vhub_update_epn_stall(struct ast_vhub_ep *ep) +{ + u32 reg; + + if (WARN_ON(ep->d_idx == 0)) + return; + reg = readl(ep->epn.regs + AST_VHUB_EP_CONFIG); + if (ep->epn.stalled || ep->epn.wedged) + reg |= VHUB_EP_CFG_STALL_CTRL; + else + reg &= ~VHUB_EP_CFG_STALL_CTRL; + writel(reg, ep->epn.regs + AST_VHUB_EP_CONFIG); + + if (!ep->epn.stalled && !ep->epn.wedged) + writel(VHUB_EP_TOGGLE_SET_EPNUM(ep->epn.g_idx), + ep->vhub->regs + AST_VHUB_EP_TOGGLE); +} + +static int ast_vhub_set_halt_and_wedge(struct usb_ep* u_ep, bool halt, + bool wedge) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + unsigned long flags; + + EPDBG(ep, "Set halt (%d) & wedge (%d)\n", halt, wedge); + + if (!u_ep || !u_ep->desc) + return -EINVAL; + if (ep->d_idx == 0) + return 0; + if (ep->epn.is_iso) + return -EOPNOTSUPP; + + spin_lock_irqsave(&vhub->lock, flags); + + /* Fail with still-busy IN endpoints */ + if (halt && ep->epn.is_in && !list_empty(&ep->queue)) { + spin_unlock_irqrestore(&vhub->lock, flags); + return -EAGAIN; + } + ep->epn.stalled = halt; + ep->epn.wedged = wedge; + ast_vhub_update_epn_stall(ep); + + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static int ast_vhub_epn_set_halt(struct usb_ep *u_ep, int value) +{ + return ast_vhub_set_halt_and_wedge(u_ep, value != 0, false); +} + +static int ast_vhub_epn_set_wedge(struct usb_ep *u_ep) +{ + return ast_vhub_set_halt_and_wedge(u_ep, true, true); +} + +static int ast_vhub_epn_disable(struct usb_ep* u_ep) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + unsigned long flags; + u32 imask, ep_ier; + + EPDBG(ep, "Disabling !\n"); + + spin_lock_irqsave(&vhub->lock, flags); + + ep->epn.enabled = false; + + /* Stop active DMA if any */ + ast_vhub_stop_active_req(ep, false); + + /* Disable endpoint */ + writel(0, ep->epn.regs + AST_VHUB_EP_CONFIG); + + /* Disable ACK interrupt */ + imask = VHUB_EP_IRQ(ep->epn.g_idx); + ep_ier = readl(vhub->regs + AST_VHUB_EP_ACK_IER); + ep_ier &= ~imask; + writel(ep_ier, vhub->regs + AST_VHUB_EP_ACK_IER); + writel(imask, vhub->regs + AST_VHUB_EP_ACK_ISR); + + /* Nuke all pending requests */ + ast_vhub_nuke(ep, -ESHUTDOWN); + + /* No more descriptor associated with request */ + ep->ep.desc = NULL; + + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static int ast_vhub_epn_enable(struct usb_ep* u_ep, + const struct usb_endpoint_descriptor *desc) +{ + static const char *ep_type_string[] __maybe_unused = { "ctrl", + "isoc", + "bulk", + "intr" }; + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub_dev *dev; + struct ast_vhub *vhub; + u16 maxpacket, type; + unsigned long flags; + u32 ep_conf, ep_ier, imask; + + /* Check arguments */ + if (!u_ep || !desc) + return -EINVAL; + + maxpacket = usb_endpoint_maxp(desc); + if (!ep->d_idx || !ep->dev || + desc->bDescriptorType != USB_DT_ENDPOINT || + maxpacket == 0 || maxpacket > ep->ep.maxpacket) { + EPDBG(ep, "Invalid EP enable,d_idx=%d,dev=%p,type=%d,mp=%d/%d\n", + ep->d_idx, ep->dev, desc->bDescriptorType, + maxpacket, ep->ep.maxpacket); + return -EINVAL; + } + if (ep->d_idx != usb_endpoint_num(desc)) { + EPDBG(ep, "EP number mismatch !\n"); + return -EINVAL; + } + + if (ep->epn.enabled) { + EPDBG(ep, "Already enabled\n"); + return -EBUSY; + } + dev = ep->dev; + vhub = ep->vhub; + + /* Check device state */ + if (!dev->driver) { + EPDBG(ep, "Bogus device state: driver=%p speed=%d\n", + dev->driver, dev->gadget.speed); + return -ESHUTDOWN; + } + + /* Grab some info from the descriptor */ + ep->epn.is_in = usb_endpoint_dir_in(desc); + ep->ep.maxpacket = maxpacket; + type = usb_endpoint_type(desc); + ep->epn.d_next = ep->epn.d_last = 0; + ep->epn.is_iso = false; + ep->epn.stalled = false; + ep->epn.wedged = false; + + EPDBG(ep, "Enabling [%s] %s num %d maxpacket=%d\n", + ep->epn.is_in ? "in" : "out", ep_type_string[type], + usb_endpoint_num(desc), maxpacket); + + /* Can we use DMA descriptor mode ? */ + ep->epn.desc_mode = ep->epn.descs && ep->epn.is_in; + if (ep->epn.desc_mode) + memset(ep->epn.descs, 0, 8 * AST_VHUB_DESCS_COUNT); + + /* + * Large send function can send up to 8 packets from + * one descriptor with a limit of 4095 bytes. + */ + ep->epn.chunk_max = ep->ep.maxpacket; + if (ep->epn.is_in) { + ep->epn.chunk_max <<= 3; + while (ep->epn.chunk_max > 4095) + ep->epn.chunk_max -= ep->ep.maxpacket; + } + + switch(type) { + case USB_ENDPOINT_XFER_CONTROL: + EPDBG(ep, "Only one control endpoint\n"); + return -EINVAL; + case USB_ENDPOINT_XFER_INT: + ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_INT); + break; + case USB_ENDPOINT_XFER_BULK: + ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_BULK); + break; + case USB_ENDPOINT_XFER_ISOC: + ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_ISO); + ep->epn.is_iso = true; + break; + default: + return -EINVAL; + } + + /* Encode the rest of the EP config register */ + if (maxpacket < 1024) + ep_conf |= VHUB_EP_CFG_SET_MAX_PKT(maxpacket); + if (!ep->epn.is_in) + ep_conf |= VHUB_EP_CFG_DIR_OUT; + ep_conf |= VHUB_EP_CFG_SET_EP_NUM(usb_endpoint_num(desc)); + ep_conf |= VHUB_EP_CFG_ENABLE; + ep_conf |= VHUB_EP_CFG_SET_DEV(dev->index + 1); + EPVDBG(ep, "config=%08x\n", ep_conf); + + spin_lock_irqsave(&vhub->lock, flags); + + /* Disable HW and reset DMA */ + writel(0, ep->epn.regs + AST_VHUB_EP_CONFIG); + writel(VHUB_EP_DMA_CTRL_RESET, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + + /* Configure and enable */ + writel(ep_conf, ep->epn.regs + AST_VHUB_EP_CONFIG); + + if (ep->epn.desc_mode) { + /* Clear DMA status, including the DMA read ptr */ + writel(0, ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + + /* Set descriptor base */ + writel(ep->epn.descs_dma, + ep->epn.regs + AST_VHUB_EP_DESC_BASE); + + /* Set base DMA config value */ + ep->epn.dma_conf = VHUB_EP_DMA_DESC_MODE; + if (ep->epn.is_in) + ep->epn.dma_conf |= VHUB_EP_DMA_IN_LONG_MODE; + + /* First reset and disable all operations */ + writel(ep->epn.dma_conf | VHUB_EP_DMA_CTRL_RESET, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + + /* Enable descriptor mode */ + writel(ep->epn.dma_conf, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + } else { + /* Set base DMA config value */ + ep->epn.dma_conf = VHUB_EP_DMA_SINGLE_STAGE; + + /* Reset and switch to single stage mode */ + writel(ep->epn.dma_conf | VHUB_EP_DMA_CTRL_RESET, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + writel(ep->epn.dma_conf, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + writel(0, ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + } + + /* Cleanup data toggle just in case */ + writel(VHUB_EP_TOGGLE_SET_EPNUM(ep->epn.g_idx), + vhub->regs + AST_VHUB_EP_TOGGLE); + + /* Cleanup and enable ACK interrupt */ + imask = VHUB_EP_IRQ(ep->epn.g_idx); + writel(imask, vhub->regs + AST_VHUB_EP_ACK_ISR); + ep_ier = readl(vhub->regs + AST_VHUB_EP_ACK_IER); + ep_ier |= imask; + writel(ep_ier, vhub->regs + AST_VHUB_EP_ACK_IER); + + /* Woot, we are online ! */ + ep->epn.enabled = true; + + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static void ast_vhub_epn_dispose(struct usb_ep *u_ep) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + + if (WARN_ON(!ep->dev || !ep->d_idx)) + return; + + EPDBG(ep, "Releasing endpoint\n"); + + /* Take it out of the EP list */ + list_del_init(&ep->ep.ep_list); + + /* Mark the address free in the device */ + ep->dev->epns[ep->d_idx - 1] = NULL; + + /* Free name & DMA buffers */ + kfree(ep->ep.name); + ep->ep.name = NULL; + dma_free_coherent(&ep->vhub->pdev->dev, + AST_VHUB_EPn_MAX_PACKET + + 8 * AST_VHUB_DESCS_COUNT, + ep->buf, ep->buf_dma); + ep->buf = NULL; + ep->epn.descs = NULL; + + /* Mark free */ + ep->dev = NULL; +} + +static const struct usb_ep_ops ast_vhub_epn_ops = { + .enable = ast_vhub_epn_enable, + .disable = ast_vhub_epn_disable, + .dispose = ast_vhub_epn_dispose, + .queue = ast_vhub_epn_queue, + .dequeue = ast_vhub_epn_dequeue, + .set_halt = ast_vhub_epn_set_halt, + .set_wedge = ast_vhub_epn_set_wedge, + .alloc_request = ast_vhub_alloc_request, + .free_request = ast_vhub_free_request, +}; + +struct ast_vhub_ep *ast_vhub_alloc_epn(struct ast_vhub_dev *d, u8 addr) +{ + struct ast_vhub *vhub = d->vhub; + struct ast_vhub_ep *ep; + unsigned long flags; + int i; + + /* Find a free one (no device) */ + spin_lock_irqsave(&vhub->lock, flags); + for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) + if (vhub->epns[i].dev == NULL) + break; + if (i >= AST_VHUB_NUM_GEN_EPs) { + spin_unlock_irqrestore(&vhub->lock, flags); + return NULL; + } + + /* Set it up */ + ep = &vhub->epns[i]; + ep->dev = d; + spin_unlock_irqrestore(&vhub->lock, flags); + + DDBG(d, "Allocating gen EP %d for addr %d\n", i, addr); + INIT_LIST_HEAD(&ep->queue); + ep->d_idx = addr; + ep->vhub = vhub; + ep->ep.ops = &ast_vhub_epn_ops; + ep->ep.name = kasprintf(GFP_KERNEL, "ep%d", addr); + d->epns[addr-1] = ep; + ep->epn.g_idx = i; + ep->epn.regs = vhub->regs + 0x200 + (i * 0x10); + + ep->buf = dma_alloc_coherent(&vhub->pdev->dev, + AST_VHUB_EPn_MAX_PACKET + + 8 * AST_VHUB_DESCS_COUNT, + &ep->buf_dma, GFP_KERNEL); + if (!ep->buf) { + kfree(ep->ep.name); + ep->ep.name = NULL; + return NULL; + } + ep->epn.descs = ep->buf + AST_VHUB_EPn_MAX_PACKET; + ep->epn.descs_dma = ep->buf_dma + AST_VHUB_EPn_MAX_PACKET; + + usb_ep_set_maxpacket_limit(&ep->ep, AST_VHUB_EPn_MAX_PACKET); + list_add_tail(&ep->ep.ep_list, &d->gadget.ep_list); + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + + return ep; +} diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c new file mode 100644 index 000000000000..35ba0e55a2e9 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c @@ -0,0 +1,829 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * hub.c - virtual hub handling + * + * Copyright 2017 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> +#include <linux/bcd.h> +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "vhub.h" + +/* usb 2.0 hub device descriptor + * + * A few things we may want to improve here: + * + * - We may need to indicate TT support + * - We may need a device qualifier descriptor + * as devices can pretend to be usb1 or 2 + * - Make vid/did overridable + * - make it look like usb1 if usb1 mode forced + */ +#define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff)) +#define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff)) + +enum { + AST_VHUB_STR_MANUF = 3, + AST_VHUB_STR_PRODUCT = 2, + AST_VHUB_STR_SERIAL = 1, +}; + +static const struct usb_device_descriptor ast_vhub_dev_desc = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_HUB, + .bDeviceSubClass = 0, + .bDeviceProtocol = 1, + .bMaxPacketSize0 = 64, + .idVendor = cpu_to_le16(0x1d6b), + .idProduct = cpu_to_le16(0x0107), + .bcdDevice = cpu_to_le16(0x0100), + .iManufacturer = AST_VHUB_STR_MANUF, + .iProduct = AST_VHUB_STR_PRODUCT, + .iSerialNumber = AST_VHUB_STR_SERIAL, + .bNumConfigurations = 1, +}; + +/* Patches to the above when forcing USB1 mode */ +static void ast_vhub_patch_dev_desc_usb1(struct usb_device_descriptor *desc) +{ + desc->bcdUSB = cpu_to_le16(0x0100); + desc->bDeviceProtocol = 0; +} + +/* + * Configuration descriptor: same comments as above + * regarding handling USB1 mode. + */ + +/* + * We don't use sizeof() as Linux definition of + * struct usb_endpoint_descriptor contains 2 + * extra bytes + */ +#define AST_VHUB_CONF_DESC_SIZE (USB_DT_CONFIG_SIZE + \ + USB_DT_INTERFACE_SIZE + \ + USB_DT_ENDPOINT_SIZE) + +static const struct ast_vhub_full_cdesc { + struct usb_config_descriptor cfg; + struct usb_interface_descriptor intf; + struct usb_endpoint_descriptor ep; +} __attribute__ ((packed)) ast_vhub_conf_desc = { + .cfg = { + .bLength = USB_DT_CONFIG_SIZE, + .bDescriptorType = USB_DT_CONFIG, + .wTotalLength = cpu_to_le16(AST_VHUB_CONF_DESC_SIZE), + .bNumInterfaces = 1, + .bConfigurationValue = 1, + .iConfiguration = 0, + .bmAttributes = USB_CONFIG_ATT_ONE | + USB_CONFIG_ATT_SELFPOWER | + USB_CONFIG_ATT_WAKEUP, + .bMaxPower = 0, + }, + .intf = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_HUB, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + .iInterface = 0, + }, + .ep = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0x81, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(1), + .bInterval = 0x0c, + }, +}; + +#define AST_VHUB_HUB_DESC_SIZE (USB_DT_HUB_NONVAR_SIZE + 2) + +static const struct usb_hub_descriptor ast_vhub_hub_desc = { + .bDescLength = AST_VHUB_HUB_DESC_SIZE, + .bDescriptorType = USB_DT_HUB, + .bNbrPorts = AST_VHUB_NUM_PORTS, + .wHubCharacteristics = cpu_to_le16(HUB_CHAR_NO_LPSM), + .bPwrOn2PwrGood = 10, + .bHubContrCurrent = 0, + .u.hs.DeviceRemovable[0] = 0, + .u.hs.DeviceRemovable[1] = 0xff, +}; + +/* + * These strings converted to UTF-16 must be smaller than + * our EP0 buffer. + */ +static const struct usb_string ast_vhub_str_array[] = { + { + .id = AST_VHUB_STR_SERIAL, + .s = "00000000" + }, + { + .id = AST_VHUB_STR_PRODUCT, + .s = "USB Virtual Hub" + }, + { + .id = AST_VHUB_STR_MANUF, + .s = "Aspeed" + }, + { } +}; + +static const struct usb_gadget_strings ast_vhub_strings = { + .language = 0x0409, + .strings = (struct usb_string *)ast_vhub_str_array +}; + +static int ast_vhub_hub_dev_status(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue) +{ + u8 st0; + + EPDBG(ep, "GET_STATUS(dev)\n"); + + /* + * Mark it as self-powered, I doubt the BMC is powered off + * the USB bus ... + */ + st0 = 1 << USB_DEVICE_SELF_POWERED; + + /* + * Need to double check how remote wakeup actually works + * on that chip and what triggers it. + */ + if (ep->vhub->wakeup_en) + st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP; + + return ast_vhub_simple_reply(ep, st0, 0); +} + +static int ast_vhub_hub_ep_status(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue) +{ + int ep_num; + u8 st0 = 0; + + ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + EPDBG(ep, "GET_STATUS(ep%d)\n", ep_num); + + /* On the hub we have only EP 0 and 1 */ + if (ep_num == 1) { + if (ep->vhub->ep1_stalled) + st0 |= 1 << USB_ENDPOINT_HALT; + } else if (ep_num != 0) + return std_req_stall; + + return ast_vhub_simple_reply(ep, st0, 0); +} + +static int ast_vhub_hub_dev_feature(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue, + bool is_set) +{ + EPDBG(ep, "%s_FEATURE(dev val=%02x)\n", + is_set ? "SET" : "CLEAR", wValue); + + if (wValue != USB_DEVICE_REMOTE_WAKEUP) + return std_req_stall; + + ep->vhub->wakeup_en = is_set; + EPDBG(ep, "Hub remote wakeup %s\n", + is_set ? "enabled" : "disabled"); + + return std_req_complete; +} + +static int ast_vhub_hub_ep_feature(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue, + bool is_set) +{ + int ep_num; + u32 reg; + + ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + EPDBG(ep, "%s_FEATURE(ep%d val=%02x)\n", + is_set ? "SET" : "CLEAR", ep_num, wValue); + + if (ep_num > 1) + return std_req_stall; + if (wValue != USB_ENDPOINT_HALT) + return std_req_stall; + if (ep_num == 0) + return std_req_complete; + + EPDBG(ep, "%s stall on EP 1\n", + is_set ? "setting" : "clearing"); + + ep->vhub->ep1_stalled = is_set; + reg = readl(ep->vhub->regs + AST_VHUB_EP1_CTRL); + if (is_set) { + reg |= VHUB_EP1_CTRL_STALL; + } else { + reg &= ~VHUB_EP1_CTRL_STALL; + reg |= VHUB_EP1_CTRL_RESET_TOGGLE; + } + writel(reg, ep->vhub->regs + AST_VHUB_EP1_CTRL); + + return std_req_complete; +} + +static int ast_vhub_rep_desc(struct ast_vhub_ep *ep, + u8 desc_type, u16 len) +{ + size_t dsize; + + EPDBG(ep, "GET_DESCRIPTOR(type:%d)\n", desc_type); + + /* + * Copy first to EP buffer and send from there, so + * we can do some in-place patching if needed. We know + * the EP buffer is big enough but ensure that doesn't + * change. We do that now rather than later after we + * have checked sizes etc... to avoid a gcc bug where + * it thinks len is constant and barfs about read + * overflows in memcpy. + */ + switch(desc_type) { + case USB_DT_DEVICE: + dsize = USB_DT_DEVICE_SIZE; + memcpy(ep->buf, &ast_vhub_dev_desc, dsize); + BUILD_BUG_ON(dsize > sizeof(ast_vhub_dev_desc)); + BUILD_BUG_ON(USB_DT_DEVICE_SIZE >= AST_VHUB_EP0_MAX_PACKET); + break; + case USB_DT_CONFIG: + dsize = AST_VHUB_CONF_DESC_SIZE; + memcpy(ep->buf, &ast_vhub_conf_desc, dsize); + BUILD_BUG_ON(dsize > sizeof(ast_vhub_conf_desc)); + BUILD_BUG_ON(AST_VHUB_CONF_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET); + break; + case USB_DT_HUB: + dsize = AST_VHUB_HUB_DESC_SIZE; + memcpy(ep->buf, &ast_vhub_hub_desc, dsize); + BUILD_BUG_ON(dsize > sizeof(ast_vhub_hub_desc)); + BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET); + break; + default: + return std_req_stall; + } + + /* Crop requested length */ + if (len > dsize) + len = dsize; + + /* Patch it if forcing USB1 */ + if (desc_type == USB_DT_DEVICE && ep->vhub->force_usb1) + ast_vhub_patch_dev_desc_usb1(ep->buf); + + /* Shoot it from the EP buffer */ + return ast_vhub_reply(ep, NULL, len); +} + +static int ast_vhub_rep_string(struct ast_vhub_ep *ep, + u8 string_id, u16 lang_id, + u16 len) +{ + int rc = usb_gadget_get_string (&ast_vhub_strings, string_id, ep->buf); + + /* + * This should never happen unless we put too big strings in + * the array above + */ + BUG_ON(rc >= AST_VHUB_EP0_MAX_PACKET); + + if (rc < 0) + return std_req_stall; + + /* Shoot it from the EP buffer */ + return ast_vhub_reply(ep, NULL, min_t(u16, rc, len)); +} + +enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq) +{ + struct ast_vhub *vhub = ep->vhub; + u16 wValue, wIndex, wLength; + + wValue = le16_to_cpu(crq->wValue); + wIndex = le16_to_cpu(crq->wIndex); + wLength = le16_to_cpu(crq->wLength); + + /* First packet, grab speed */ + if (vhub->speed == USB_SPEED_UNKNOWN) { + u32 ustat = readl(vhub->regs + AST_VHUB_USBSTS); + if (ustat & VHUB_USBSTS_HISPEED) + vhub->speed = USB_SPEED_HIGH; + else + vhub->speed = USB_SPEED_FULL; + UDCDBG(vhub, "USB status=%08x speed=%s\n", ustat, + vhub->speed == USB_SPEED_HIGH ? "high" : "full"); + } + + switch ((crq->bRequestType << 8) | crq->bRequest) { + /* SET_ADDRESS */ + case DeviceOutRequest | USB_REQ_SET_ADDRESS: + EPDBG(ep, "SET_ADDRESS: Got address %x\n", wValue); + writel(wValue, vhub->regs + AST_VHUB_CONF); + return std_req_complete; + + /* GET_STATUS */ + case DeviceRequest | USB_REQ_GET_STATUS: + return ast_vhub_hub_dev_status(ep, wIndex, wValue); + case InterfaceRequest | USB_REQ_GET_STATUS: + return ast_vhub_simple_reply(ep, 0, 0); + case EndpointRequest | USB_REQ_GET_STATUS: + return ast_vhub_hub_ep_status(ep, wIndex, wValue); + + /* SET/CLEAR_FEATURE */ + case DeviceOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_hub_dev_feature(ep, wIndex, wValue, true); + case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_hub_dev_feature(ep, wIndex, wValue, false); + case EndpointOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_hub_ep_feature(ep, wIndex, wValue, true); + case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_hub_ep_feature(ep, wIndex, wValue, false); + + /* GET/SET_CONFIGURATION */ + case DeviceRequest | USB_REQ_GET_CONFIGURATION: + return ast_vhub_simple_reply(ep, 1); + case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: + if (wValue != 1) + return std_req_stall; + return std_req_complete; + + /* GET_DESCRIPTOR */ + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + switch (wValue >> 8) { + case USB_DT_DEVICE: + case USB_DT_CONFIG: + return ast_vhub_rep_desc(ep, wValue >> 8, + wLength); + case USB_DT_STRING: + return ast_vhub_rep_string(ep, wValue & 0xff, + wIndex, wLength); + } + return std_req_stall; + + /* GET/SET_INTERFACE */ + case DeviceRequest | USB_REQ_GET_INTERFACE: + return ast_vhub_simple_reply(ep, 0); + case DeviceOutRequest | USB_REQ_SET_INTERFACE: + if (wValue != 0 || wIndex != 0) + return std_req_stall; + return std_req_complete; + } + return std_req_stall; +} + +static void ast_vhub_update_hub_ep1(struct ast_vhub *vhub, + unsigned int port) +{ + /* Update HW EP1 response */ + u32 reg = readl(vhub->regs + AST_VHUB_EP1_STS_CHG); + u32 pmask = (1 << (port + 1)); + if (vhub->ports[port].change) + reg |= pmask; + else + reg &= ~pmask; + writel(reg, vhub->regs + AST_VHUB_EP1_STS_CHG); +} + +static void ast_vhub_change_port_stat(struct ast_vhub *vhub, + unsigned int port, + u16 clr_flags, + u16 set_flags, + bool set_c) +{ + struct ast_vhub_port *p = &vhub->ports[port]; + u16 prev; + + /* Update port status */ + prev = p->status; + p->status = (prev & ~clr_flags) | set_flags; + DDBG(&p->dev, "port %d status %04x -> %04x (C=%d)\n", + port + 1, prev, p->status, set_c); + + /* Update change bits if needed */ + if (set_c) { + u16 chg = p->status ^ prev; + + /* Only these are relevant for change */ + chg &= USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE | + USB_PORT_STAT_C_SUSPEND | + USB_PORT_STAT_C_OVERCURRENT | + USB_PORT_STAT_C_RESET | + USB_PORT_STAT_C_L1; + p->change |= chg; + + ast_vhub_update_hub_ep1(vhub, port); + } +} + +static void ast_vhub_send_host_wakeup(struct ast_vhub *vhub) +{ + u32 reg = readl(vhub->regs + AST_VHUB_CTRL); + UDCDBG(vhub, "Waking up host !\n"); + reg |= VHUB_CTRL_MANUAL_REMOTE_WAKEUP; + writel(reg, vhub->regs + AST_VHUB_CTRL); +} + +void ast_vhub_device_connect(struct ast_vhub *vhub, + unsigned int port, bool on) +{ + if (on) + ast_vhub_change_port_stat(vhub, port, 0, + USB_PORT_STAT_CONNECTION, true); + else + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_ENABLE, + 0, true); + + /* + * If the hub is set to wakup the host on connection events + * then send a wakeup. + */ + if (vhub->wakeup_en) + ast_vhub_send_host_wakeup(vhub); +} + +static void ast_vhub_wake_work(struct work_struct *work) +{ + struct ast_vhub *vhub = container_of(work, + struct ast_vhub, + wake_work); + unsigned long flags; + unsigned int i; + + /* + * Wake all sleeping ports. If a port is suspended by + * the host suspend (without explicit state suspend), + * we let the normal host wake path deal with it later. + */ + spin_lock_irqsave(&vhub->lock, flags); + for (i = 0; i < AST_VHUB_NUM_PORTS; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + if (!(p->status & USB_PORT_STAT_SUSPEND)) + continue; + ast_vhub_change_port_stat(vhub, i, + USB_PORT_STAT_SUSPEND, + 0, true); + ast_vhub_dev_resume(&p->dev); + } + ast_vhub_send_host_wakeup(vhub); + spin_unlock_irqrestore(&vhub->lock, flags); +} + +void ast_vhub_hub_wake_all(struct ast_vhub *vhub) +{ + /* + * A device is trying to wake the world, because this + * can recurse into the device, we break the call chain + * using a work queue + */ + schedule_work(&vhub->wake_work); +} + +static void ast_vhub_port_reset(struct ast_vhub *vhub, u8 port) +{ + struct ast_vhub_port *p = &vhub->ports[port]; + u16 set, clr, speed; + + /* First mark disabled */ + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_ENABLE | + USB_PORT_STAT_SUSPEND, + USB_PORT_STAT_RESET, + false); + + if (!p->dev.driver) + return; + + /* + * This will either "start" the port or reset the + * device if already started... + */ + ast_vhub_dev_reset(&p->dev); + + /* Grab the right speed */ + speed = p->dev.driver->max_speed; + if (speed == USB_SPEED_UNKNOWN || speed > vhub->speed) + speed = vhub->speed; + + switch (speed) { + case USB_SPEED_LOW: + set = USB_PORT_STAT_LOW_SPEED; + clr = USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_FULL: + set = 0; + clr = USB_PORT_STAT_LOW_SPEED | + USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_HIGH: + set = USB_PORT_STAT_HIGH_SPEED; + clr = USB_PORT_STAT_LOW_SPEED; + break; + default: + UDCDBG(vhub, "Unsupported speed %d when" + " connecting device\n", + speed); + return; + } + clr |= USB_PORT_STAT_RESET; + set |= USB_PORT_STAT_ENABLE; + + /* This should ideally be delayed ... */ + ast_vhub_change_port_stat(vhub, port, clr, set, true); +} + +static enum std_req_rc ast_vhub_set_port_feature(struct ast_vhub_ep *ep, + u8 port, u16 feat) +{ + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_port *p; + + if (port == 0 || port > AST_VHUB_NUM_PORTS) + return std_req_stall; + port--; + p = &vhub->ports[port]; + + switch(feat) { + case USB_PORT_FEAT_SUSPEND: + if (!(p->status & USB_PORT_STAT_ENABLE)) + return std_req_complete; + ast_vhub_change_port_stat(vhub, port, + 0, USB_PORT_STAT_SUSPEND, + false); + ast_vhub_dev_suspend(&p->dev); + return std_req_complete; + case USB_PORT_FEAT_RESET: + EPDBG(ep, "Port reset !\n"); + ast_vhub_port_reset(vhub, port); + return std_req_complete; + case USB_PORT_FEAT_POWER: + /* + * On Power-on, we mark the connected flag changed, + * if there's a connected device, some hosts will + * otherwise fail to detect it. + */ + if (p->status & USB_PORT_STAT_CONNECTION) { + p->change |= USB_PORT_STAT_C_CONNECTION; + ast_vhub_update_hub_ep1(vhub, port); + } + return std_req_complete; + case USB_PORT_FEAT_TEST: + case USB_PORT_FEAT_INDICATOR: + /* We don't do anything with these */ + return std_req_complete; + } + return std_req_stall; +} + +static enum std_req_rc ast_vhub_clr_port_feature(struct ast_vhub_ep *ep, + u8 port, u16 feat) +{ + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_port *p; + + if (port == 0 || port > AST_VHUB_NUM_PORTS) + return std_req_stall; + port--; + p = &vhub->ports[port]; + + switch(feat) { + case USB_PORT_FEAT_ENABLE: + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_ENABLE | + USB_PORT_STAT_SUSPEND, 0, + false); + ast_vhub_dev_suspend(&p->dev); + return std_req_complete; + case USB_PORT_FEAT_SUSPEND: + if (!(p->status & USB_PORT_STAT_SUSPEND)) + return std_req_complete; + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_SUSPEND, 0, + false); + ast_vhub_dev_resume(&p->dev); + return std_req_complete; + case USB_PORT_FEAT_POWER: + /* We don't do power control */ + return std_req_complete; + case USB_PORT_FEAT_INDICATOR: + /* We don't have indicators */ + return std_req_complete; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_RESET: + /* Clear state-change feature */ + p->change &= ~(1u << (feat - 16)); + ast_vhub_update_hub_ep1(vhub, port); + return std_req_complete; + } + return std_req_stall; +} + +static enum std_req_rc ast_vhub_get_port_stat(struct ast_vhub_ep *ep, + u8 port) +{ + struct ast_vhub *vhub = ep->vhub; + u16 stat, chg; + + if (port == 0 || port > AST_VHUB_NUM_PORTS) + return std_req_stall; + port--; + + stat = vhub->ports[port].status; + chg = vhub->ports[port].change; + + /* We always have power */ + stat |= USB_PORT_STAT_POWER; + + EPDBG(ep, " port status=%04x change=%04x\n", stat, chg); + + return ast_vhub_simple_reply(ep, + stat & 0xff, + stat >> 8, + chg & 0xff, + chg >> 8); +} + +enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq) +{ + u16 wValue, wIndex, wLength; + + wValue = le16_to_cpu(crq->wValue); + wIndex = le16_to_cpu(crq->wIndex); + wLength = le16_to_cpu(crq->wLength); + + switch ((crq->bRequestType << 8) | crq->bRequest) { + case GetHubStatus: + EPDBG(ep, "GetHubStatus\n"); + return ast_vhub_simple_reply(ep, 0, 0, 0, 0); + case GetPortStatus: + EPDBG(ep, "GetPortStatus(%d)\n", wIndex & 0xff); + return ast_vhub_get_port_stat(ep, wIndex & 0xf); + case GetHubDescriptor: + if (wValue != (USB_DT_HUB << 8)) + return std_req_stall; + EPDBG(ep, "GetHubDescriptor(%d)\n", wIndex & 0xff); + return ast_vhub_rep_desc(ep, USB_DT_HUB, wLength); + case SetHubFeature: + case ClearHubFeature: + EPDBG(ep, "Get/SetHubFeature(%d)\n", wValue); + /* No feature, just complete the requests */ + if (wValue == C_HUB_LOCAL_POWER || + wValue == C_HUB_OVER_CURRENT) + return std_req_complete; + return std_req_stall; + case SetPortFeature: + EPDBG(ep, "SetPortFeature(%d,%d)\n", wIndex & 0xf, wValue); + return ast_vhub_set_port_feature(ep, wIndex & 0xf, wValue); + case ClearPortFeature: + EPDBG(ep, "ClearPortFeature(%d,%d)\n", wIndex & 0xf, wValue); + return ast_vhub_clr_port_feature(ep, wIndex & 0xf, wValue); + default: + EPDBG(ep, "Unknown class request\n"); + } + return std_req_stall; +} + +void ast_vhub_hub_suspend(struct ast_vhub *vhub) +{ + unsigned int i; + + UDCDBG(vhub, "USB bus suspend\n"); + + if (vhub->suspended) + return; + + vhub->suspended = true; + + /* + * Forward to unsuspended ports without changing + * their connection status. + */ + for (i = 0; i < AST_VHUB_NUM_PORTS; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + if (!(p->status & USB_PORT_STAT_SUSPEND)) + ast_vhub_dev_suspend(&p->dev); + } +} + +void ast_vhub_hub_resume(struct ast_vhub *vhub) +{ + unsigned int i; + + UDCDBG(vhub, "USB bus resume\n"); + + if (!vhub->suspended) + return; + + vhub->suspended = false; + + /* + * Forward to unsuspended ports without changing + * their connection status. + */ + for (i = 0; i < AST_VHUB_NUM_PORTS; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + if (!(p->status & USB_PORT_STAT_SUSPEND)) + ast_vhub_dev_resume(&p->dev); + } +} + +void ast_vhub_hub_reset(struct ast_vhub *vhub) +{ + unsigned int i; + + UDCDBG(vhub, "USB bus reset\n"); + + /* + * Is the speed known ? If not we don't care, we aren't + * initialized yet and ports haven't been enabled. + */ + if (vhub->speed == USB_SPEED_UNKNOWN) + return; + + /* We aren't suspended anymore obviously */ + vhub->suspended = false; + + /* No speed set */ + vhub->speed = USB_SPEED_UNKNOWN; + + /* Wakeup not enabled anymore */ + vhub->wakeup_en = false; + + /* + * Clear all port status, disable gadgets and "suspend" + * them. They will be woken up by a port reset. + */ + for (i = 0; i < AST_VHUB_NUM_PORTS; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + /* Only keep the connected flag */ + p->status &= USB_PORT_STAT_CONNECTION; + p->change = 0; + + /* Suspend the gadget if any */ + ast_vhub_dev_suspend(&p->dev); + } + + /* Cleanup HW */ + writel(0, vhub->regs + AST_VHUB_CONF); + writel(0, vhub->regs + AST_VHUB_EP0_CTRL); + writel(VHUB_EP1_CTRL_RESET_TOGGLE | + VHUB_EP1_CTRL_ENABLE, + vhub->regs + AST_VHUB_EP1_CTRL); + writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG); +} + +void ast_vhub_init_hub(struct ast_vhub *vhub) +{ + vhub->speed = USB_SPEED_UNKNOWN; + INIT_WORK(&vhub->wake_work, ast_vhub_wake_work); +} + diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h new file mode 100644 index 000000000000..2b040257bc1f --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h @@ -0,0 +1,514 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +#ifndef __ASPEED_VHUB_H +#define __ASPEED_VHUB_H + +/***************************** + * * + * VHUB register definitions * + * * + *****************************/ + +#define AST_VHUB_CTRL 0x00 /* Root Function Control & Status Register */ +#define AST_VHUB_CONF 0x04 /* Root Configuration Setting Register */ +#define AST_VHUB_IER 0x08 /* Interrupt Ctrl Register */ +#define AST_VHUB_ISR 0x0C /* Interrupt Status Register */ +#define AST_VHUB_EP_ACK_IER 0x10 /* Programmable Endpoint Pool ACK Interrupt Enable Register */ +#define AST_VHUB_EP_NACK_IER 0x14 /* Programmable Endpoint Pool NACK Interrupt Enable Register */ +#define AST_VHUB_EP_ACK_ISR 0x18 /* Programmable Endpoint Pool ACK Interrupt Status Register */ +#define AST_VHUB_EP_NACK_ISR 0x1C /* Programmable Endpoint Pool NACK Interrupt Status Register */ +#define AST_VHUB_SW_RESET 0x20 /* Device Controller Soft Reset Enable Register */ +#define AST_VHUB_USBSTS 0x24 /* USB Status Register */ +#define AST_VHUB_EP_TOGGLE 0x28 /* Programmable Endpoint Pool Data Toggle Value Set */ +#define AST_VHUB_ISO_FAIL_ACC 0x2C /* Isochronous Transaction Fail Accumulator */ +#define AST_VHUB_EP0_CTRL 0x30 /* Endpoint 0 Contrl/Status Register */ +#define AST_VHUB_EP0_DATA 0x34 /* Base Address of Endpoint 0 In/OUT Data Buffer Register */ +#define AST_VHUB_EP1_CTRL 0x38 /* Endpoint 1 Contrl/Status Register */ +#define AST_VHUB_EP1_STS_CHG 0x3C /* Endpoint 1 Status Change Bitmap Data */ +#define AST_VHUB_SETUP0 0x80 /* Root Device Setup Data Buffer0 */ +#define AST_VHUB_SETUP1 0x84 /* Root Device Setup Data Buffer1 */ + +/* Main control reg */ +#define VHUB_CTRL_PHY_CLK (1 << 31) +#define VHUB_CTRL_PHY_LOOP_TEST (1 << 25) +#define VHUB_CTRL_DN_PWN (1 << 24) +#define VHUB_CTRL_DP_PWN (1 << 23) +#define VHUB_CTRL_LONG_DESC (1 << 18) +#define VHUB_CTRL_ISO_RSP_CTRL (1 << 17) +#define VHUB_CTRL_SPLIT_IN (1 << 16) +#define VHUB_CTRL_LOOP_T_RESULT (1 << 15) +#define VHUB_CTRL_LOOP_T_STS (1 << 14) +#define VHUB_CTRL_PHY_BIST_RESULT (1 << 13) +#define VHUB_CTRL_PHY_BIST_CTRL (1 << 12) +#define VHUB_CTRL_PHY_RESET_DIS (1 << 11) +#define VHUB_CTRL_SET_TEST_MODE(x) ((x) << 8) +#define VHUB_CTRL_MANUAL_REMOTE_WAKEUP (1 << 4) +#define VHUB_CTRL_AUTO_REMOTE_WAKEUP (1 << 3) +#define VHUB_CTRL_CLK_STOP_SUSPEND (1 << 2) +#define VHUB_CTRL_FULL_SPEED_ONLY (1 << 1) +#define VHUB_CTRL_UPSTREAM_CONNECT (1 << 0) + +/* IER & ISR */ +#define VHUB_IRQ_USB_CMD_DEADLOCK (1 << 18) +#define VHUB_IRQ_EP_POOL_NAK (1 << 17) +#define VHUB_IRQ_EP_POOL_ACK_STALL (1 << 16) +#define VHUB_IRQ_DEVICE5 (1 << 13) +#define VHUB_IRQ_DEVICE4 (1 << 12) +#define VHUB_IRQ_DEVICE3 (1 << 11) +#define VHUB_IRQ_DEVICE2 (1 << 10) +#define VHUB_IRQ_DEVICE1 (1 << 9) +#define VHUB_IRQ_BUS_RESUME (1 << 8) +#define VHUB_IRQ_BUS_SUSPEND (1 << 7) +#define VHUB_IRQ_BUS_RESET (1 << 6) +#define VHUB_IRQ_HUB_EP1_IN_DATA_ACK (1 << 5) +#define VHUB_IRQ_HUB_EP0_IN_DATA_NAK (1 << 4) +#define VHUB_IRQ_HUB_EP0_IN_ACK_STALL (1 << 3) +#define VHUB_IRQ_HUB_EP0_OUT_NAK (1 << 2) +#define VHUB_IRQ_HUB_EP0_OUT_ACK_STALL (1 << 1) +#define VHUB_IRQ_HUB_EP0_SETUP (1 << 0) +#define VHUB_IRQ_ACK_ALL 0x1ff + +/* SW reset reg */ +#define VHUB_SW_RESET_EP_POOL (1 << 9) +#define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8) +#define VHUB_SW_RESET_DEVICE5 (1 << 5) +#define VHUB_SW_RESET_DEVICE4 (1 << 4) +#define VHUB_SW_RESET_DEVICE3 (1 << 3) +#define VHUB_SW_RESET_DEVICE2 (1 << 2) +#define VHUB_SW_RESET_DEVICE1 (1 << 1) +#define VHUB_SW_RESET_ROOT_HUB (1 << 0) +#define VHUB_SW_RESET_ALL (VHUB_SW_RESET_EP_POOL | \ + VHUB_SW_RESET_DMA_CONTROLLER | \ + VHUB_SW_RESET_DEVICE5 | \ + VHUB_SW_RESET_DEVICE4 | \ + VHUB_SW_RESET_DEVICE3 | \ + VHUB_SW_RESET_DEVICE2 | \ + VHUB_SW_RESET_DEVICE1 | \ + VHUB_SW_RESET_ROOT_HUB) +/* EP ACK/NACK IRQ masks */ +#define VHUB_EP_IRQ(n) (1 << (n)) +#define VHUB_EP_IRQ_ALL 0x7fff /* 15 EPs */ + +/* USB status reg */ +#define VHUB_USBSTS_HISPEED (1 << 27) + +/* EP toggle */ +#define VHUB_EP_TOGGLE_VALUE (1 << 8) +#define VHUB_EP_TOGGLE_SET_EPNUM(x) ((x) & 0x1f) + +/* HUB EP0 control */ +#define VHUB_EP0_CTRL_STALL (1 << 0) +#define VHUB_EP0_TX_BUFF_RDY (1 << 1) +#define VHUB_EP0_RX_BUFF_RDY (1 << 2) +#define VHUB_EP0_RX_LEN(x) (((x) >> 16) & 0x7f) +#define VHUB_EP0_SET_TX_LEN(x) (((x) & 0x7f) << 8) + +/* HUB EP1 control */ +#define VHUB_EP1_CTRL_RESET_TOGGLE (1 << 2) +#define VHUB_EP1_CTRL_STALL (1 << 1) +#define VHUB_EP1_CTRL_ENABLE (1 << 0) + +/*********************************** + * * + * per-device register definitions * + * * + ***********************************/ +#define AST_VHUB_DEV_EN_CTRL 0x00 +#define AST_VHUB_DEV_ISR 0x04 +#define AST_VHUB_DEV_EP0_CTRL 0x08 +#define AST_VHUB_DEV_EP0_DATA 0x0c + +/* Device enable control */ +#define VHUB_DEV_EN_SET_ADDR(x) ((x) << 8) +#define VHUB_DEV_EN_ADDR_MASK ((0xff) << 8) +#define VHUB_DEV_EN_EP0_NAK_IRQEN (1 << 6) +#define VHUB_DEV_EN_EP0_IN_ACK_IRQEN (1 << 5) +#define VHUB_DEV_EN_EP0_OUT_NAK_IRQEN (1 << 4) +#define VHUB_DEV_EN_EP0_OUT_ACK_IRQEN (1 << 3) +#define VHUB_DEV_EN_EP0_SETUP_IRQEN (1 << 2) +#define VHUB_DEV_EN_SPEED_SEL_HIGH (1 << 1) +#define VHUB_DEV_EN_ENABLE_PORT (1 << 0) + +/* Interrupt status */ +#define VHUV_DEV_IRQ_EP0_IN_DATA_NACK (1 << 4) +#define VHUV_DEV_IRQ_EP0_IN_ACK_STALL (1 << 3) +#define VHUV_DEV_IRQ_EP0_OUT_DATA_NACK (1 << 2) +#define VHUV_DEV_IRQ_EP0_OUT_ACK_STALL (1 << 1) +#define VHUV_DEV_IRQ_EP0_SETUP (1 << 0) + +/* Control bits. + * + * Note: The driver relies on the bulk of those bits + * matching corresponding vHub EP0 control bits + */ +#define VHUB_DEV_EP0_CTRL_STALL VHUB_EP0_CTRL_STALL +#define VHUB_DEV_EP0_TX_BUFF_RDY VHUB_EP0_TX_BUFF_RDY +#define VHUB_DEV_EP0_RX_BUFF_RDY VHUB_EP0_RX_BUFF_RDY +#define VHUB_DEV_EP0_RX_LEN(x) VHUB_EP0_RX_LEN(x) +#define VHUB_DEV_EP0_SET_TX_LEN(x) VHUB_EP0_SET_TX_LEN(x) + +/************************************* + * * + * per-endpoint register definitions * + * * + *************************************/ + +#define AST_VHUB_EP_CONFIG 0x00 +#define AST_VHUB_EP_DMA_CTLSTAT 0x04 +#define AST_VHUB_EP_DESC_BASE 0x08 +#define AST_VHUB_EP_DESC_STATUS 0x0C + +/* EP config reg */ +#define VHUB_EP_CFG_SET_MAX_PKT(x) (((x) & 0x3ff) << 16) +#define VHUB_EP_CFG_AUTO_DATA_DISABLE (1 << 13) +#define VHUB_EP_CFG_STALL_CTRL (1 << 12) +#define VHUB_EP_CFG_SET_EP_NUM(x) (((x) & 0xf) << 8) +#define VHUB_EP_CFG_SET_TYPE(x) ((x) << 5) +#define EP_TYPE_OFF 0 +#define EP_TYPE_BULK 1 +#define EP_TYPE_INT 2 +#define EP_TYPE_ISO 3 +#define VHUB_EP_CFG_DIR_OUT (1 << 4) +#define VHUB_EP_CFG_SET_DEV(x) ((x) << 1) +#define VHUB_EP_CFG_ENABLE (1 << 0) + +/* EP DMA control */ +#define VHUB_EP_DMA_PROC_STATUS(x) (((x) >> 4) & 0xf) +#define EP_DMA_PROC_RX_IDLE 0 +#define EP_DMA_PROC_TX_IDLE 8 +#define VHUB_EP_DMA_IN_LONG_MODE (1 << 3) +#define VHUB_EP_DMA_OUT_CONTIG_MODE (1 << 3) +#define VHUB_EP_DMA_CTRL_RESET (1 << 2) +#define VHUB_EP_DMA_SINGLE_STAGE (1 << 1) +#define VHUB_EP_DMA_DESC_MODE (1 << 0) + +/* EP DMA status */ +#define VHUB_EP_DMA_SET_TX_SIZE(x) ((x) << 16) +#define VHUB_EP_DMA_TX_SIZE(x) (((x) >> 16) & 0x7ff) +#define VHUB_EP_DMA_RPTR(x) (((x) >> 8) & 0xff) +#define VHUB_EP_DMA_SET_RPTR(x) (((x) & 0xff) << 8) +#define VHUB_EP_DMA_SET_CPU_WPTR(x) (x) +#define VHUB_EP_DMA_SINGLE_KICK (1 << 0) /* WPTR = 1 for single mode */ + +/******************************* + * * + * DMA descriptors definitions * + * * + *******************************/ + +/* Desc W1 IN */ +#define VHUB_DSC1_IN_INTERRUPT (1 << 31) +#define VHUB_DSC1_IN_SPID_DATA0 (0 << 14) +#define VHUB_DSC1_IN_SPID_DATA2 (1 << 14) +#define VHUB_DSC1_IN_SPID_DATA1 (2 << 14) +#define VHUB_DSC1_IN_SPID_MDATA (3 << 14) +#define VHUB_DSC1_IN_SET_LEN(x) ((x) & 0xfff) +#define VHUB_DSC1_IN_LEN(x) ((x) & 0xfff) + +/**************************************** + * * + * Data structures and misc definitions * + * * + ****************************************/ + +#define AST_VHUB_NUM_GEN_EPs 15 /* Generic non-0 EPs */ +#define AST_VHUB_NUM_PORTS 5 /* vHub ports */ +#define AST_VHUB_EP0_MAX_PACKET 64 /* EP0's max packet size */ +#define AST_VHUB_EPn_MAX_PACKET 1024 /* Generic EPs max packet size */ +#define AST_VHUB_DESCS_COUNT 256 /* Use 256 descriptor mode (valid + * values are 256 and 32) + */ + +struct ast_vhub; +struct ast_vhub_dev; + +/* + * DMA descriptor (generic EPs only, currently only used + * for IN endpoints + */ +struct ast_vhub_desc { + __le32 w0; + __le32 w1; +}; + +/* A transfer request, either core-originated or internal */ +struct ast_vhub_req { + struct usb_request req; + struct list_head queue; + + /* Actual count written to descriptors (desc mode only) */ + unsigned int act_count; + + /* + * Desc number of the final packet or -1. For non-desc + * mode (or ep0), any >= 0 value means "last packet" + */ + int last_desc; + + /* Request active (pending DMAs) */ + bool active : 1; + + /* Internal request (don't call back core) */ + bool internal : 1; +}; +#define to_ast_req(__ureq) container_of(__ureq, struct ast_vhub_req, req) + +/* Current state of an EP0 */ +enum ep0_state { + ep0_state_token, + ep0_state_data, + ep0_state_status, +}; + +/* + * An endpoint, either generic, ep0, actual gadget EP + * or internal use vhub EP0. vhub EP1 doesn't have an + * associated structure as it's mostly HW managed. + */ +struct ast_vhub_ep { + struct usb_ep ep; + + /* Request queue */ + struct list_head queue; + + /* EP index in the device, 0 means this is an EP0 */ + unsigned int d_idx; + + /* Dev pointer or NULL for vHub EP0 */ + struct ast_vhub_dev *dev; + + /* vHub itself */ + struct ast_vhub *vhub; + + /* + * DMA buffer for EP0, fallback DMA buffer for misaligned + * OUT transfers for generic EPs + */ + void *buf; + dma_addr_t buf_dma; + + /* The rest depends on the EP type */ + union { + /* EP0 (either device or vhub) */ + struct { + /* + * EP0 registers are "similar" for + * vHub and devices but located in + * different places. + */ + void __iomem *ctlstat; + void __iomem *setup; + + /* Current state & direction */ + enum ep0_state state; + bool dir_in; + + /* Internal use request */ + struct ast_vhub_req req; + } ep0; + + /* Generic endpoint (aka EPn) */ + struct { + /* Registers */ + void __iomem *regs; + + /* Index in global pool (0..14) */ + unsigned int g_idx; + + /* DMA Descriptors */ + struct ast_vhub_desc *descs; + dma_addr_t descs_dma; + unsigned int d_next; + unsigned int d_last; + unsigned int dma_conf; + + /* Max chunk size for IN EPs */ + unsigned int chunk_max; + + /* State flags */ + bool is_in : 1; + bool is_iso : 1; + bool stalled : 1; + bool wedged : 1; + bool enabled : 1; + bool desc_mode : 1; + } epn; + }; +}; +#define to_ast_ep(__uep) container_of(__uep, struct ast_vhub_ep, ep) + +/* A device attached to a vHub port */ +struct ast_vhub_dev { + struct ast_vhub *vhub; + void __iomem *regs; + + /* Device index (0...4) and name string */ + unsigned int index; + const char *name; + + /* sysfs enclosure for the gadget gunk */ + struct device *port_dev; + + /* Link to gadget core */ + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + bool registered : 1; + bool wakeup_en : 1; + bool suspended : 1; + bool enabled : 1; + + /* Endpoint structures */ + struct ast_vhub_ep ep0; + struct ast_vhub_ep *epns[AST_VHUB_NUM_GEN_EPs]; + +}; +#define to_ast_dev(__g) container_of(__g, struct ast_vhub_dev, gadget) + +/* Per vhub port stateinfo structure */ +struct ast_vhub_port { + /* Port status & status change registers */ + u16 status; + u16 change; + + /* Associated device slot */ + struct ast_vhub_dev dev; +}; + +/* Global vhub structure */ +struct ast_vhub { + struct platform_device *pdev; + void __iomem *regs; + int irq; + spinlock_t lock; + struct work_struct wake_work; + struct clk *clk; + + /* EP0 DMA buffers allocated in one chunk */ + void *ep0_bufs; + dma_addr_t ep0_bufs_dma; + + /* EP0 of the vhub itself */ + struct ast_vhub_ep ep0; + + /* State of vhub ep1 */ + bool ep1_stalled : 1; + + /* Per-port info */ + struct ast_vhub_port ports[AST_VHUB_NUM_PORTS]; + + /* Generic EP data structures */ + struct ast_vhub_ep epns[AST_VHUB_NUM_GEN_EPs]; + + /* Upstream bus is suspended ? */ + bool suspended : 1; + + /* Hub itself can signal remote wakeup */ + bool wakeup_en : 1; + + /* Force full speed only */ + bool force_usb1 : 1; + + /* Upstream bus speed captured at bus reset */ + unsigned int speed; +}; + +/* Standard request handlers result codes */ +enum std_req_rc { + std_req_stall = -1, /* Stall requested */ + std_req_complete = 0, /* Request completed with no data */ + std_req_data = 1, /* Request completed with data */ + std_req_driver = 2, /* Pass to driver pls */ +}; + +#ifdef CONFIG_USB_GADGET_VERBOSE +#define UDCVDBG(u, fmt...) dev_dbg(&(u)->pdev->dev, fmt) + +#define EPVDBG(ep, fmt, ...) do { \ + dev_dbg(&(ep)->vhub->pdev->dev, \ + "%s:EP%d " fmt, \ + (ep)->dev ? (ep)->dev->name : "hub", \ + (ep)->d_idx, ##__VA_ARGS__); \ + } while(0) + +#define DVDBG(d, fmt, ...) do { \ + dev_dbg(&(d)->vhub->pdev->dev, \ + "%s " fmt, (d)->name, \ + ##__VA_ARGS__); \ + } while(0) + +#else +#define UDCVDBG(u, fmt...) do { } while(0) +#define EPVDBG(ep, fmt, ...) do { } while(0) +#define DVDBG(d, fmt, ...) do { } while(0) +#endif + +#ifdef CONFIG_USB_GADGET_DEBUG +#define UDCDBG(u, fmt...) dev_dbg(&(u)->pdev->dev, fmt) + +#define EPDBG(ep, fmt, ...) do { \ + dev_dbg(&(ep)->vhub->pdev->dev, \ + "%s:EP%d " fmt, \ + (ep)->dev ? (ep)->dev->name : "hub", \ + (ep)->d_idx, ##__VA_ARGS__); \ + } while(0) + +#define DDBG(d, fmt, ...) do { \ + dev_dbg(&(d)->vhub->pdev->dev, \ + "%s " fmt, (d)->name, \ + ##__VA_ARGS__); \ + } while(0) +#else +#define UDCDBG(u, fmt...) do { } while(0) +#define EPDBG(ep, fmt, ...) do { } while(0) +#define DDBG(d, fmt, ...) do { } while(0) +#endif + +/* core.c */ +void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req, + int status); +void ast_vhub_nuke(struct ast_vhub_ep *ep, int status); +struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep, + gfp_t gfp_flags); +void ast_vhub_free_request(struct usb_ep *u_ep, struct usb_request *u_req); +void ast_vhub_init_hw(struct ast_vhub *vhub); + +/* ep0.c */ +void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack); +void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep); +void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep, + struct ast_vhub_dev *dev); +int ast_vhub_reply(struct ast_vhub_ep *ep, char *ptr, int len); +int __ast_vhub_simple_reply(struct ast_vhub_ep *ep, int len, ...); +#define ast_vhub_simple_reply(udc, ...) \ + __ast_vhub_simple_reply((udc), \ + sizeof((u8[]) { __VA_ARGS__ })/sizeof(u8), \ + __VA_ARGS__) + +/* hub.c */ +void ast_vhub_init_hub(struct ast_vhub *vhub); +enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq); +enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq); +void ast_vhub_device_connect(struct ast_vhub *vhub, unsigned int port, + bool on); +void ast_vhub_hub_suspend(struct ast_vhub *vhub); +void ast_vhub_hub_resume(struct ast_vhub *vhub); +void ast_vhub_hub_reset(struct ast_vhub *vhub); +void ast_vhub_hub_wake_all(struct ast_vhub *vhub); + +/* dev.c */ +int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx); +void ast_vhub_del_dev(struct ast_vhub_dev *d); +void ast_vhub_dev_irq(struct ast_vhub_dev *d); +int ast_vhub_std_dev_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq); + +/* epn.c */ +void ast_vhub_epn_ack_irq(struct ast_vhub_ep *ep); +void ast_vhub_update_epn_stall(struct ast_vhub_ep *ep); +struct ast_vhub_ep *ast_vhub_alloc_epn(struct ast_vhub_dev *d, u8 addr); +void ast_vhub_dev_suspend(struct ast_vhub_dev *d); +void ast_vhub_dev_resume(struct ast_vhub_dev *d); +void ast_vhub_dev_reset(struct ast_vhub_dev *d); + +#endif /* __ASPEED_VHUB_H */ diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 27c16399c7e8..a4d99bf50f2f 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -20,7 +20,6 @@ #include <linux/ctype.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -#include <linux/usb/atmel_usba_udc.h> #include <linux/delay.h> #include <linux/of.h> #include <linux/irq.h> @@ -207,94 +206,45 @@ static void usba_ep_init_debugfs(struct usba_udc *udc, struct dentry *ep_root; ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root); - if (!ep_root) - goto err_root; ep->debugfs_dir = ep_root; - ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root, - ep, &queue_dbg_fops); - if (!ep->debugfs_queue) - goto err_queue; - - if (ep->can_dma) { - ep->debugfs_dma_status - = debugfs_create_u32("dma_status", 0400, ep_root, - &ep->last_dma_status); - if (!ep->debugfs_dma_status) - goto err_dma_status; - } - if (ep_is_control(ep)) { - ep->debugfs_state - = debugfs_create_u32("state", 0400, ep_root, - &ep->state); - if (!ep->debugfs_state) - goto err_state; - } - - return; - -err_state: + debugfs_create_file("queue", 0400, ep_root, ep, &queue_dbg_fops); if (ep->can_dma) - debugfs_remove(ep->debugfs_dma_status); -err_dma_status: - debugfs_remove(ep->debugfs_queue); -err_queue: - debugfs_remove(ep_root); -err_root: - dev_err(&ep->udc->pdev->dev, - "failed to create debugfs directory for %s\n", ep->ep.name); + debugfs_create_u32("dma_status", 0400, ep_root, + &ep->last_dma_status); + if (ep_is_control(ep)) + debugfs_create_u32("state", 0400, ep_root, &ep->state); } static void usba_ep_cleanup_debugfs(struct usba_ep *ep) { - debugfs_remove(ep->debugfs_queue); - debugfs_remove(ep->debugfs_dma_status); - debugfs_remove(ep->debugfs_state); - debugfs_remove(ep->debugfs_dir); - ep->debugfs_dma_status = NULL; - ep->debugfs_dir = NULL; + debugfs_remove_recursive(ep->debugfs_dir); } static void usba_init_debugfs(struct usba_udc *udc) { - struct dentry *root, *regs; + struct dentry *root; struct resource *regs_resource; root = debugfs_create_dir(udc->gadget.name, NULL); - if (IS_ERR(root) || !root) - goto err_root; udc->debugfs_root = root; regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM, CTRL_IOMEM_ID); if (regs_resource) { - regs = debugfs_create_file_size("regs", 0400, root, udc, - ®s_dbg_fops, - resource_size(regs_resource)); - if (!regs) - goto err_regs; - udc->debugfs_regs = regs; + debugfs_create_file_size("regs", 0400, root, udc, + ®s_dbg_fops, + resource_size(regs_resource)); } usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0)); - - return; - -err_regs: - debugfs_remove(root); -err_root: - udc->debugfs_root = NULL; - dev_err(&udc->pdev->dev, "debugfs is not available\n"); } static void usba_cleanup_debugfs(struct usba_udc *udc) { usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0)); - debugfs_remove(udc->debugfs_regs); - debugfs_remove(udc->debugfs_root); - udc->debugfs_regs = NULL; - udc->debugfs_root = NULL; + debugfs_remove_recursive(udc->debugfs_root); } #else static inline void usba_ep_init_debugfs(struct usba_udc *udc, @@ -417,7 +367,7 @@ static inline void usba_int_enb_set(struct usba_udc *udc, u32 val) static int vbus_is_present(struct usba_udc *udc) { if (udc->vbus_pin) - return gpiod_get_value(udc->vbus_pin) ^ udc->vbus_pin_inverted; + return gpiod_get_value(udc->vbus_pin); /* No Vbus detection: Assume always present */ return 1; @@ -2076,7 +2026,6 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, udc->vbus_pin = devm_gpiod_get_optional(&pdev->dev, "atmel,vbus", GPIOD_IN); - udc->vbus_pin_inverted = gpiod_is_active_low(udc->vbus_pin); if (fifo_mode == 0) { pp = NULL; @@ -2279,15 +2228,15 @@ static int usba_udc_probe(struct platform_device *pdev) if (udc->vbus_pin) { irq_set_status_flags(gpiod_to_irq(udc->vbus_pin), IRQ_NOAUTOEN); ret = devm_request_threaded_irq(&pdev->dev, - gpiod_to_irq(udc->vbus_pin), NULL, - usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS, - "atmel_usba_udc", udc); - if (ret) { - udc->vbus_pin = NULL; - dev_warn(&udc->pdev->dev, - "failed to request vbus irq; " - "assuming always on\n"); - } + gpiod_to_irq(udc->vbus_pin), NULL, + usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS, + "atmel_usba_udc", udc); + if (ret) { + udc->vbus_pin = NULL; + dev_warn(&udc->pdev->dev, + "failed to request vbus irq; " + "assuming always on\n"); + } } ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget); diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index 969ce8f3c3e2..030bf797cd25 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -287,9 +287,6 @@ struct usba_ep { #ifdef CONFIG_USB_GADGET_DEBUG_FS u32 last_dma_status; struct dentry *debugfs_dir; - struct dentry *debugfs_queue; - struct dentry *debugfs_dma_status; - struct dentry *debugfs_state; #endif }; @@ -326,7 +323,6 @@ struct usba_udc { const struct usba_udc_errata *errata; int irq; struct gpio_desc *vbus_pin; - int vbus_pin_inverted; int num_ep; int configured_ep; struct usba_fifo_cfg *fifo_cfg; @@ -345,7 +341,6 @@ struct usba_udc { #ifdef CONFIG_USB_GADGET_DEBUG_FS struct dentry *debugfs_root; - struct dentry *debugfs_regs; #endif struct regmap *pmc; diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c index 3a8df8601074..c1fcc77403ea 100644 --- a/drivers/usb/gadget/udc/bcm63xx_udc.c +++ b/drivers/usb/gadget/udc/bcm63xx_udc.c @@ -288,8 +288,6 @@ struct bcm63xx_req { * @ep0_reply: Pending reply from gadget driver. * @ep0_request: Outstanding ep0 request. * @debugfs_root: debugfs directory: /sys/kernel/debug/<DRV_MODULE_NAME>. - * @debugfs_usbd: debugfs file "usbd" for controller state. - * @debugfs_iudma: debugfs file "usbd" for IUDMA state. */ struct bcm63xx_udc { spinlock_t lock; @@ -330,8 +328,6 @@ struct bcm63xx_udc { struct usb_request *ep0_request; struct dentry *debugfs_root; - struct dentry *debugfs_usbd; - struct dentry *debugfs_iudma; }; static const struct usb_ep_ops bcm63xx_udc_ep_ops; @@ -2247,34 +2243,16 @@ DEFINE_SHOW_ATTRIBUTE(bcm63xx_iudma_dbg); */ static void bcm63xx_udc_init_debugfs(struct bcm63xx_udc *udc) { - struct dentry *root, *usbd, *iudma; + struct dentry *root; if (!IS_ENABLED(CONFIG_USB_GADGET_DEBUG_FS)) return; root = debugfs_create_dir(udc->gadget.name, NULL); - if (IS_ERR(root) || !root) - goto err_root; - - usbd = debugfs_create_file("usbd", 0400, root, udc, - &bcm63xx_usbd_dbg_fops); - if (!usbd) - goto err_usbd; - iudma = debugfs_create_file("iudma", 0400, root, udc, - &bcm63xx_iudma_dbg_fops); - if (!iudma) - goto err_iudma; - udc->debugfs_root = root; - udc->debugfs_usbd = usbd; - udc->debugfs_iudma = iudma; - return; -err_iudma: - debugfs_remove(usbd); -err_usbd: - debugfs_remove(root); -err_root: - dev_err(udc->dev, "debugfs is not available\n"); + + debugfs_create_file("usbd", 0400, root, udc, &bcm63xx_usbd_dbg_fops); + debugfs_create_file("iudma", 0400, root, udc, &bcm63xx_iudma_dbg_fops); } /** @@ -2285,12 +2263,7 @@ err_root: */ static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc) { - debugfs_remove(udc->debugfs_iudma); - debugfs_remove(udc->debugfs_usbd); - debugfs_remove(udc->debugfs_root); - udc->debugfs_iudma = NULL; - udc->debugfs_usbd = NULL; - udc->debugfs_root = NULL; + debugfs_remove_recursive(udc->debugfs_root); } /*********************************************************************** diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 842814bc0e4f..cab5e4f09924 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -244,6 +244,12 @@ EXPORT_SYMBOL_GPL(usb_ep_free_request); * Returns zero, or a negative error code. Endpoints that are not enabled * report errors; errors will also be * reported when the usb peripheral is disconnected. + * + * If and only if @req is successfully queued (the return value is zero), + * @req->complete() will be called exactly once, when the Gadget core and + * UDC are finished with the request. When the completion function is called, + * control of the request is returned to the device driver which submitted it. + * The completion handler may then immediately free or reuse @req. */ int usb_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags) diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index 7d8af299dfc7..9a3f7db26a5e 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -253,6 +253,7 @@ static int dr_controller_setup(struct fsl_udc *udc) portctrl |= PORTSCX_PTW_16BIT; /* fall through */ case FSL_USB2_PHY_UTMI: + case FSL_USB2_PHY_UTMI_DUAL: if (udc->pdata->have_sysif_regs) { if (udc->pdata->controller_ver) { /* controller version 1.6 or above */ diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c index ca83c15d8ea4..729e60e49564 100644 --- a/drivers/usb/gadget/udc/gr_udc.c +++ b/drivers/usb/gadget/udc/gr_udc.c @@ -209,15 +209,12 @@ static void gr_dfs_create(struct gr_udc *dev) const char *name = "gr_udc_state"; dev->dfs_root = debugfs_create_dir(dev_name(dev->dev), NULL); - dev->dfs_state = debugfs_create_file(name, 0444, dev->dfs_root, dev, - &gr_dfs_fops); + debugfs_create_file(name, 0444, dev->dfs_root, dev, &gr_dfs_fops); } static void gr_dfs_delete(struct gr_udc *dev) { - /* Handles NULL and ERR pointers internally */ - debugfs_remove(dev->dfs_state); - debugfs_remove(dev->dfs_root); + debugfs_remove_recursive(dev->dfs_root); } #else /* !CONFIG_USB_GADGET_DEBUG_FS */ diff --git a/drivers/usb/gadget/udc/gr_udc.h b/drivers/usb/gadget/udc/gr_udc.h index 3e913268c8c5..417ad2aa2cc7 100644 --- a/drivers/usb/gadget/udc/gr_udc.h +++ b/drivers/usb/gadget/udc/gr_udc.h @@ -217,7 +217,6 @@ struct gr_udc { spinlock_t lock; /* General lock, a.k.a. "dev->lock" in comments */ struct dentry *dfs_root; - struct dentry *dfs_state; }; #define to_gr_udc(gadget) (container_of((gadget), struct gr_udc, gadget)) diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index a58242e901df..014233252299 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -205,50 +205,19 @@ DEFINE_SHOW_ATTRIBUTE(eps_dbg); static void pxa_init_debugfs(struct pxa_udc *udc) { - struct dentry *root, *state, *queues, *eps; + struct dentry *root; root = debugfs_create_dir(udc->gadget.name, NULL); - if (IS_ERR(root) || !root) - goto err_root; - - state = debugfs_create_file("udcstate", 0400, root, udc, - &state_dbg_fops); - if (!state) - goto err_state; - queues = debugfs_create_file("queues", 0400, root, udc, - &queues_dbg_fops); - if (!queues) - goto err_queues; - eps = debugfs_create_file("epstate", 0400, root, udc, - &eps_dbg_fops); - if (!eps) - goto err_eps; - udc->debugfs_root = root; - udc->debugfs_state = state; - udc->debugfs_queues = queues; - udc->debugfs_eps = eps; - return; -err_eps: - debugfs_remove(eps); -err_queues: - debugfs_remove(queues); -err_state: - debugfs_remove(root); -err_root: - dev_err(udc->dev, "debugfs is not available\n"); + + debugfs_create_file("udcstate", 0400, root, udc, &state_dbg_fops); + debugfs_create_file("queues", 0400, root, udc, &queues_dbg_fops); + debugfs_create_file("epstate", 0400, root, udc, &eps_dbg_fops); } static void pxa_cleanup_debugfs(struct pxa_udc *udc) { - debugfs_remove(udc->debugfs_eps); - debugfs_remove(udc->debugfs_queues); - debugfs_remove(udc->debugfs_state); - debugfs_remove(udc->debugfs_root); - udc->debugfs_eps = NULL; - udc->debugfs_queues = NULL; - udc->debugfs_state = NULL; - udc->debugfs_root = NULL; + debugfs_remove_recursive(udc->debugfs_root); } #else diff --git a/drivers/usb/gadget/udc/pxa27x_udc.h b/drivers/usb/gadget/udc/pxa27x_udc.h index 1128d39a4255..13b2977399ab 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.h +++ b/drivers/usb/gadget/udc/pxa27x_udc.h @@ -476,9 +476,6 @@ struct pxa_udc { #endif #ifdef CONFIG_USB_GADGET_DEBUG_FS struct dentry *debugfs_root; - struct dentry *debugfs_state; - struct dentry *debugfs_queues; - struct dentry *debugfs_eps; #endif }; #define to_pxa(g) (container_of((g), struct pxa_udc, gadget)) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 409cde4e6a51..977ea1a02cf9 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -333,6 +333,7 @@ struct renesas_usb3 { struct extcon_dev *extcon; struct work_struct extcon_work; struct phy *phy; + struct dentry *dentry; struct renesas_usb3_ep *usb3_ep; int num_usb3_eps; @@ -622,6 +623,13 @@ static void usb3_disconnect(struct renesas_usb3 *usb3) usb3_usb2_pullup(usb3, 0); usb3_clear_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON); usb3_reset_epc(usb3); + usb3_disable_irq_1(usb3, USB_INT_1_B2_RSUM | USB_INT_1_B3_PLLWKUP | + USB_INT_1_B3_LUPSUCS | USB_INT_1_B3_DISABLE | + USB_INT_1_SPEED | USB_INT_1_B3_WRMRST | + USB_INT_1_B3_HOTRST | USB_INT_1_B2_SPND | + USB_INT_1_B2_L1SPND | USB_INT_1_B2_USBRST); + usb3_clear_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON); + usb3_init_epc_registers(usb3); if (usb3->driver) usb3->driver->disconnect(&usb3->gadget); @@ -2383,18 +2391,10 @@ static const struct file_operations renesas_usb3_b_device_fops = { static void renesas_usb3_debugfs_init(struct renesas_usb3 *usb3, struct device *dev) { - struct dentry *root, *file; - - root = debugfs_create_dir(dev_name(dev), NULL); - if (IS_ERR_OR_NULL(root)) { - dev_info(dev, "%s: Can't create the root\n", __func__); - return; - } + usb3->dentry = debugfs_create_dir(dev_name(dev), NULL); - file = debugfs_create_file("b_device", 0644, root, usb3, - &renesas_usb3_b_device_fops); - if (!file) - dev_info(dev, "%s: Can't create debugfs mode\n", __func__); + debugfs_create_file("b_device", 0644, usb3->dentry, usb3, + &renesas_usb3_b_device_fops); } /*------- platform_driver ------------------------------------------------*/ @@ -2402,14 +2402,13 @@ static int renesas_usb3_remove(struct platform_device *pdev) { struct renesas_usb3 *usb3 = platform_get_drvdata(pdev); + debugfs_remove_recursive(usb3->dentry); device_remove_file(&pdev->dev, &dev_attr_role); usb_del_gadget_udc(&usb3->gadget); renesas_usb3_dma_free_prd(usb3, &pdev->dev); __renesas_usb3_ep_free_request(usb3->ep0_req); - if (usb3->phy) - phy_put(usb3->phy); pm_runtime_disable(&pdev->dev); return 0; @@ -2628,6 +2627,17 @@ static int renesas_usb3_probe(struct platform_device *pdev) if (ret < 0) goto err_alloc_prd; + /* + * This is optional. So, if this driver cannot get a phy, + * this driver will not handle a phy anymore. + */ + usb3->phy = devm_phy_optional_get(&pdev->dev, "usb"); + if (IS_ERR(usb3->phy)) { + ret = PTR_ERR(usb3->phy); + goto err_add_udc; + } + + pm_runtime_enable(&pdev->dev); ret = usb_add_gadget_udc(&pdev->dev, &usb3->gadget); if (ret < 0) goto err_add_udc; @@ -2636,20 +2646,11 @@ static int renesas_usb3_probe(struct platform_device *pdev) if (ret < 0) goto err_dev_create; - /* - * This is an optional. So, if this driver cannot get a phy, - * this driver will not handle a phy anymore. - */ - usb3->phy = devm_phy_get(&pdev->dev, "usb"); - if (IS_ERR(usb3->phy)) - usb3->phy = NULL; - usb3->workaround_for_vbus = priv->workaround_for_vbus; renesas_usb3_debugfs_init(usb3, &pdev->dev); dev_info(&pdev->dev, "probed%s\n", usb3->phy ? " with phy" : ""); - pm_runtime_enable(usb3_to_dev(usb3)); return 0; diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index f154f49e98c8..8bf5ad7a59ad 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -1871,13 +1871,9 @@ static int s3c2410_udc_probe(struct platform_device *pdev) if (retval) goto err_add_udc; - if (s3c2410_udc_debugfs_root) { - udc->regs_info = debugfs_create_file("registers", S_IRUGO, - s3c2410_udc_debugfs_root, - udc, &s3c2410_udc_debugfs_fops); - if (!udc->regs_info) - dev_warn(dev, "debugfs file creation failed\n"); - } + udc->regs_info = debugfs_create_file("registers", S_IRUGO, + s3c2410_udc_debugfs_root, udc, + &s3c2410_udc_debugfs_fops); dev_dbg(dev, "probe ok\n"); @@ -1994,11 +1990,6 @@ static int __init udc_init(void) dprintk(DEBUG_NORMAL, "%s\n", gadget_name); s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL); - if (IS_ERR(s3c2410_udc_debugfs_root)) { - pr_err("%s: debugfs dir creation failed %ld\n", - gadget_name, PTR_ERR(s3c2410_udc_debugfs_root)); - s3c2410_udc_debugfs_root = NULL; - } retval = platform_driver_register(&udc_driver_24x0); if (retval) @@ -2014,7 +2005,7 @@ err: static void __exit udc_exit(void) { platform_driver_unregister(&udc_driver_24x0); - debugfs_remove(s3c2410_udc_debugfs_root); + debugfs_remove_recursive(s3c2410_udc_debugfs_root); } module_init(udc_init); diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 566ab261e8b7..7c24d1ce1088 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -33,7 +33,7 @@ * characters (which are also widely used in C strings). */ int -usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) +usb_gadget_get_string (const struct usb_gadget_strings *table, int id, u8 *buf) { struct usb_string *s; int len; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5d958da8e1bc..6e64d3a64dbb 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -52,6 +52,13 @@ config USB_XHCI_PLATFORM If unsure, say N. +config USB_XHCI_HISTB + tristate "xHCI support for HiSilicon STB SoCs" + depends on USB_XHCI_PLATFORM && (ARCH_HISI || COMPILE_TEST) + help + Say 'Y' to enable the support for the xHCI host controller + found in HiSilicon STB SoCs. + config USB_XHCI_MTK tristate "xHCI support for MediaTek SoCs" select MFD_SYSCON @@ -234,9 +241,7 @@ config USB_EHCI_TEGRA tristate "NVIDIA Tegra HCD support" depends on ARCH_TEGRA select USB_EHCI_ROOT_HUB_TT - select USB_PHY - select USB_ULPI - select USB_ULPI_VIEWPORT + select USB_TEGRA_PHY help This driver enables support for the internal USB Host Controllers found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 8a8cffe0b445..9b669c9f9a48 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -74,6 +74,7 @@ obj-$(CONFIG_USB_FHCI_HCD) += fhci.o obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o +obj-$(CONFIG_USB_XHCI_HISTB) += xhci-histb.o obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o obj-$(CONFIG_USB_XHCI_TEGRA) += xhci-tegra.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 3ed75aaa09d9..7619cfb06883 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -1028,29 +1028,15 @@ static inline void create_debug_files(struct ehci_hcd *ehci) struct usb_bus *bus = &ehci_to_hcd(ehci)->self; ehci->debug_dir = debugfs_create_dir(bus->bus_name, ehci_debug_root); - if (!ehci->debug_dir) - return; - if (!debugfs_create_file("async", S_IRUGO, ehci->debug_dir, bus, - &debug_async_fops)) - goto file_error; - - if (!debugfs_create_file("bandwidth", S_IRUGO, ehci->debug_dir, bus, - &debug_bandwidth_fops)) - goto file_error; - - if (!debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus, - &debug_periodic_fops)) - goto file_error; - - if (!debugfs_create_file("registers", S_IRUGO, ehci->debug_dir, bus, - &debug_registers_fops)) - goto file_error; - - return; - -file_error: - debugfs_remove_recursive(ehci->debug_dir); + debugfs_create_file("async", S_IRUGO, ehci->debug_dir, bus, + &debug_async_fops); + debugfs_create_file("bandwidth", S_IRUGO, ehci->debug_dir, bus, + &debug_bandwidth_fops); + debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus, + &debug_periodic_fops); + debugfs_create_file("registers", S_IRUGO, ehci->debug_dir, bus, + &debug_registers_fops); } static inline void remove_debug_files(struct ehci_hcd *ehci) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index d927adf3afcd..89c47ae5c7d3 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1311,10 +1311,6 @@ static int __init ehci_hcd_init(void) #ifdef CONFIG_DYNAMIC_DEBUG ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root); - if (!ehci_debug_root) { - retval = -ENOENT; - goto err_debug; - } #endif #ifdef PLATFORM_DRIVER @@ -1361,7 +1357,6 @@ clean0: #ifdef CONFIG_DYNAMIC_DEBUG debugfs_remove(ehci_debug_root); ehci_debug_root = NULL; -err_debug: #endif clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded); return retval; diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 8d8bafc70c1f..7e4c13346a1e 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -157,10 +157,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) struct usb_phy *phy; /* get the PHY device */ - if (dev->of_node) - phy = devm_usb_get_phy_by_phandle(dev, "phys", i); - else - phy = devm_usb_get_phy_dev(dev, i); + phy = devm_usb_get_phy_by_phandle(dev, "phys", i); if (IS_ERR(phy)) { /* Don't bail out if PHY is not absolutely necessary */ if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index a6f4389f7e88..4d2cdec4cb78 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -36,7 +36,6 @@ #define DRV_NAME "tegra-ehci" static struct hc_driver __read_mostly tegra_ehci_hc_driver; -static bool usb1_reset_attempted; struct tegra_ehci_soc_config { bool has_hostpc; @@ -51,67 +50,54 @@ struct tegra_ehci_hcd { enum tegra_usb_phy_port_speed port_speed; }; -/* - * The 1st USB controller contains some UTMI pad registers that are global for - * all the controllers on the chip. Those registers are also cleared when - * reset is asserted to the 1st controller. This means that the 1st controller - * can only be reset when no other controlled has finished probing. So we'll - * reset the 1st controller before doing any other setup on any of the - * controllers, and then never again. - * - * Since this is a PHY issue, the Tegra PHY driver should probably be doing - * the resetting of the USB controllers. But to keep compatibility with old - * device trees that don't have reset phandles in the PHYs, do it here. - * Those old DTs will be vulnerable to total USB breakage if the 1st EHCI - * device isn't the first one to finish probing, so warn them. - */ static int tegra_reset_usb_controller(struct platform_device *pdev) { struct device_node *phy_np; struct usb_hcd *hcd = platform_get_drvdata(pdev); struct tegra_ehci_hcd *tegra = (struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv; - bool has_utmi_pad_registers = false; + struct reset_control *rst; + int err; phy_np = of_parse_phandle(pdev->dev.of_node, "nvidia,phy", 0); if (!phy_np) return -ENOENT; - if (of_property_read_bool(phy_np, "nvidia,has-utmi-pad-registers")) - has_utmi_pad_registers = true; + /* + * The 1st USB controller contains some UTMI pad registers that are + * global for all the controllers on the chip. Those registers are + * also cleared when reset is asserted to the 1st controller. + */ + rst = of_reset_control_get_shared(phy_np, "utmi-pads"); + if (IS_ERR(rst)) { + dev_warn(&pdev->dev, + "can't get utmi-pads reset from the PHY\n"); + dev_warn(&pdev->dev, + "continuing, but please update your DT\n"); + } else { + /* + * PHY driver performs UTMI-pads reset in a case of + * non-legacy DT. + */ + reset_control_put(rst); + } - if (!usb1_reset_attempted) { - struct reset_control *usb1_reset; + of_node_put(phy_np); - if (!has_utmi_pad_registers) - usb1_reset = of_reset_control_get(phy_np, "utmi-pads"); - else - usb1_reset = tegra->rst; - - if (IS_ERR(usb1_reset)) { - dev_warn(&pdev->dev, - "can't get utmi-pads reset from the PHY\n"); - dev_warn(&pdev->dev, - "continuing, but please update your DT\n"); - } else { - reset_control_assert(usb1_reset); - udelay(1); - reset_control_deassert(usb1_reset); - - if (!has_utmi_pad_registers) - reset_control_put(usb1_reset); - } + /* reset control is shared, hence initialize it first */ + err = reset_control_deassert(tegra->rst); + if (err) + return err; - usb1_reset_attempted = true; - } + err = reset_control_assert(tegra->rst); + if (err) + return err; - if (!has_utmi_pad_registers) { - reset_control_assert(tegra->rst); - udelay(1); - reset_control_deassert(tegra->rst); - } + udelay(1); - of_node_put(phy_np); + err = reset_control_deassert(tegra->rst); + if (err) + return err; return 0; } @@ -440,7 +426,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto cleanup_hcd_create; } - tegra->rst = devm_reset_control_get(&pdev->dev, "usb"); + tegra->rst = devm_reset_control_get_shared(&pdev->dev, "usb"); if (IS_ERR(tegra->rst)) { dev_err(&pdev->dev, "Can't get ehci reset\n"); err = PTR_ERR(tegra->rst); @@ -452,8 +438,10 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto cleanup_hcd_create; err = tegra_reset_usb_controller(pdev); - if (err) + if (err) { + dev_err(&pdev->dev, "Failed to reset controller\n"); goto cleanup_clk_en; + } u_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0); if (IS_ERR(u_phy)) { @@ -538,6 +526,9 @@ static int tegra_ehci_remove(struct platform_device *pdev) usb_phy_shutdown(hcd->usb_phy); usb_remove_hcd(hcd); + reset_control_assert(tegra->rst); + udelay(1); + clk_disable_unprepare(tegra->clk); usb_put_hcd(hcd); diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c index ebf9bb219f75..100048b3bd17 100644 --- a/drivers/usb/host/fhci-dbg.c +++ b/drivers/usb/host/fhci-dbg.c @@ -83,27 +83,14 @@ void fhci_dfs_create(struct fhci_hcd *fhci) struct device *dev = fhci_to_hcd(fhci)->self.controller; fhci->dfs_root = debugfs_create_dir(dev_name(dev), usb_debug_root); - if (!fhci->dfs_root) { - WARN_ON(1); - return; - } - - fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO, - fhci->dfs_root, fhci, &fhci_dfs_regs_fops); - fhci->dfs_irq_stat = debugfs_create_file("irq_stat", - S_IFREG | S_IRUGO, fhci->dfs_root, fhci, - &fhci_dfs_irq_stat_fops); - - WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat); + debugfs_create_file("regs", S_IFREG | S_IRUGO, fhci->dfs_root, fhci, + &fhci_dfs_regs_fops); + debugfs_create_file("irq_stat", S_IFREG | S_IRUGO, fhci->dfs_root, fhci, + &fhci_dfs_irq_stat_fops); } void fhci_dfs_destroy(struct fhci_hcd *fhci) { - if (!fhci->dfs_root) - return; - - debugfs_remove(fhci->dfs_irq_stat); - debugfs_remove(fhci->dfs_regs); - debugfs_remove(fhci->dfs_root); + debugfs_remove_recursive(fhci->dfs_root); } diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h index e7ec41d62410..2ce5031d866d 100644 --- a/drivers/usb/host/fhci.h +++ b/drivers/usb/host/fhci.h @@ -262,8 +262,6 @@ struct fhci_hcd { #ifdef CONFIG_FHCI_DEBUG int usb_irq_stat[13]; struct dentry *dfs_root; - struct dentry *dfs_regs; - struct dentry *dfs_irq_stat; #endif }; diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index d8abf401918a..e64eb47770c8 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -844,28 +844,16 @@ static int debug_registers_open(struct inode *inode, struct file *file) static inline void create_debug_files(struct fotg210_hcd *fotg210) { struct usb_bus *bus = &fotg210_to_hcd(fotg210)->self; + struct dentry *root; - fotg210->debug_dir = debugfs_create_dir(bus->bus_name, - fotg210_debug_root); - if (!fotg210->debug_dir) - return; - - if (!debugfs_create_file("async", S_IRUGO, fotg210->debug_dir, bus, - &debug_async_fops)) - goto file_error; - - if (!debugfs_create_file("periodic", S_IRUGO, fotg210->debug_dir, bus, - &debug_periodic_fops)) - goto file_error; + root = debugfs_create_dir(bus->bus_name, fotg210_debug_root); + fotg210->debug_dir = root; - if (!debugfs_create_file("registers", S_IRUGO, fotg210->debug_dir, bus, - &debug_registers_fops)) - goto file_error; - - return; - -file_error: - debugfs_remove_recursive(fotg210->debug_dir); + debugfs_create_file("async", S_IRUGO, root, bus, &debug_async_fops); + debugfs_create_file("periodic", S_IRUGO, root, bus, + &debug_periodic_fops); + debugfs_create_file("registers", S_IRUGO, root, bus, + &debug_registers_fops); } static inline void remove_debug_files(struct fotg210_hcd *fotg210) @@ -5686,10 +5674,6 @@ static int __init fotg210_hcd_init(void) sizeof(struct fotg210_itd)); fotg210_debug_root = debugfs_create_dir("fotg210", usb_debug_root); - if (!fotg210_debug_root) { - retval = -ENOENT; - goto err_debug; - } retval = platform_driver_register(&fotg210_hcd_driver); if (retval < 0) @@ -5699,7 +5683,7 @@ static int __init fotg210_hcd_init(void) clean: debugfs_remove(fotg210_debug_root); fotg210_debug_root = NULL; -err_debug: + clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded); return retval; } diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c index a213ed6f07b5..7fcf1d9dd7f3 100644 --- a/drivers/usb/host/imx21-dbg.c +++ b/drivers/usb/host/imx21-dbg.c @@ -417,46 +417,22 @@ DEFINE_SHOW_ATTRIBUTE(debug_isoc); static void create_debug_files(struct imx21 *imx21) { - imx21->debug_root = debugfs_create_dir(dev_name(imx21->dev), NULL); - if (!imx21->debug_root) - goto failed_create_rootdir; + struct dentry *root; - if (!debugfs_create_file("status", S_IRUGO, - imx21->debug_root, imx21, &debug_status_fops)) - goto failed_create; + root = debugfs_create_dir(dev_name(imx21->dev), NULL); + imx21->debug_root = root; - if (!debugfs_create_file("dmem", S_IRUGO, - imx21->debug_root, imx21, &debug_dmem_fops)) - goto failed_create; - - if (!debugfs_create_file("etd", S_IRUGO, - imx21->debug_root, imx21, &debug_etd_fops)) - goto failed_create; - - if (!debugfs_create_file("statistics", S_IRUGO, - imx21->debug_root, imx21, &debug_statistics_fops)) - goto failed_create; - - if (!debugfs_create_file("isoc", S_IRUGO, - imx21->debug_root, imx21, &debug_isoc_fops)) - goto failed_create; - - return; - -failed_create: - debugfs_remove_recursive(imx21->debug_root); - -failed_create_rootdir: - imx21->debug_root = NULL; + debugfs_create_file("status", S_IRUGO, root, imx21, &debug_status_fops); + debugfs_create_file("dmem", S_IRUGO, root, imx21, &debug_dmem_fops); + debugfs_create_file("etd", S_IRUGO, root, imx21, &debug_etd_fops); + debugfs_create_file("statistics", S_IRUGO, root, imx21, + &debug_statistics_fops); + debugfs_create_file("isoc", S_IRUGO, root, imx21, &debug_isoc_fops); } - static void remove_debug_files(struct imx21 *imx21) { - if (imx21->debug_root) { - debugfs_remove_recursive(imx21->debug_root); - imx21->debug_root = NULL; - } + debugfs_remove_recursive(imx21->debug_root); } #endif diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 4602ed801f0a..74da136d322a 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1198,14 +1198,11 @@ static int isp116x_debug_show(struct seq_file *s, void *unused) } DEFINE_SHOW_ATTRIBUTE(isp116x_debug); -static int create_debug_file(struct isp116x *isp116x) +static void create_debug_file(struct isp116x *isp116x) { isp116x->dentry = debugfs_create_file(hcd_name, S_IRUGO, NULL, isp116x, &isp116x_debug_fops); - if (!isp116x->dentry) - return -ENOMEM; - return 0; } static void remove_debug_file(struct isp116x *isp116x) @@ -1215,8 +1212,8 @@ static void remove_debug_file(struct isp116x *isp116x) #else -#define create_debug_file(d) 0 -#define remove_debug_file(d) do{}while(0) +static inline void create_debug_file(struct isp116x *isp116x) { } +static inline void remove_debug_file(struct isp116x *isp116x) { } #endif /* CONFIG_DEBUG_FS */ @@ -1643,16 +1640,10 @@ static int isp116x_probe(struct platform_device *pdev) device_wakeup_enable(hcd->self.controller); - ret = create_debug_file(isp116x); - if (ret) { - ERR("Couldn't create debugfs entry\n"); - goto err7; - } + create_debug_file(isp116x); return 0; - err7: - usb_remove_hcd(hcd); err6: usb_put_hcd(hcd); err5: diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 5ad9e9bdc8ee..e98673954020 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -212,7 +212,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, ohci_at91->sfr_regmap = at91_dt_syscon_sfr(); if (!ohci_at91->sfr_regmap) - dev_warn(dev, "failed to find sfr node\n"); + dev_dbg(dev, "failed to find sfr node\n"); board = hcd->self.controller->platform_data; ohci = hcd_to_ohci(hcd); diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index ac7d4ac34b02..d3ee1f52aaab 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -762,50 +762,23 @@ static int debug_registers_open(struct inode *inode, struct file *file) static inline void create_debug_files (struct ohci_hcd *ohci) { struct usb_bus *bus = &ohci_to_hcd(ohci)->self; + struct dentry *root; - ohci->debug_dir = debugfs_create_dir(bus->bus_name, ohci_debug_root); - if (!ohci->debug_dir) - goto dir_error; + root = debugfs_create_dir(bus->bus_name, ohci_debug_root); + ohci->debug_dir = root; - ohci->debug_async = debugfs_create_file("async", S_IRUGO, - ohci->debug_dir, ohci, - &debug_async_fops); - if (!ohci->debug_async) - goto async_error; - - ohci->debug_periodic = debugfs_create_file("periodic", S_IRUGO, - ohci->debug_dir, ohci, - &debug_periodic_fops); - if (!ohci->debug_periodic) - goto periodic_error; - - ohci->debug_registers = debugfs_create_file("registers", S_IRUGO, - ohci->debug_dir, ohci, - &debug_registers_fops); - if (!ohci->debug_registers) - goto registers_error; + debugfs_create_file("async", S_IRUGO, root, ohci, &debug_async_fops); + debugfs_create_file("periodic", S_IRUGO, root, ohci, + &debug_periodic_fops); + debugfs_create_file("registers", S_IRUGO, root, ohci, + &debug_registers_fops); ohci_dbg (ohci, "created debug files\n"); - return; - -registers_error: - debugfs_remove(ohci->debug_periodic); -periodic_error: - debugfs_remove(ohci->debug_async); -async_error: - debugfs_remove(ohci->debug_dir); -dir_error: - ohci->debug_periodic = NULL; - ohci->debug_async = NULL; - ohci->debug_dir = NULL; } static inline void remove_debug_files (struct ohci_hcd *ohci) { - debugfs_remove(ohci->debug_registers); - debugfs_remove(ohci->debug_periodic); - debugfs_remove(ohci->debug_async); - debugfs_remove(ohci->debug_dir); + debugfs_remove_recursive(ohci->debug_dir); } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 4806e0f9e8d4..210181fd98d2 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1258,10 +1258,6 @@ static int __init ohci_hcd_mod_init(void) set_bit(USB_OHCI_LOADED, &usb_hcds_loaded); ohci_debug_root = debugfs_create_dir("ohci", usb_debug_root); - if (!ohci_debug_root) { - retval = -ENOENT; - goto error_debug; - } #ifdef PS3_SYSTEM_BUS_DRIVER retval = ps3_ohci_driver_register(&PS3_SYSTEM_BUS_DRIVER); @@ -1318,7 +1314,6 @@ static int __init ohci_hcd_mod_init(void) #endif debugfs_remove(ohci_debug_root); ohci_debug_root = NULL; - error_debug: clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded); return retval; diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 508a803139dd..ef4813bfc5bf 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -431,9 +431,6 @@ struct ohci_hcd { struct work_struct nec_work; /* Worker for NEC quirk */ struct dentry *debug_dir; - struct dentry *debug_async; - struct dentry *debug_periodic; - struct dentry *debug_registers; /* platform-specific data -- must come last */ unsigned long priv[0] __aligned(sizeof(s64)); diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 67ad4bb6919a..3625a5c1a41b 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -1268,23 +1268,3 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff); - -bool usb_xhci_needs_pci_reset(struct pci_dev *pdev) -{ - /* - * Our dear uPD72020{1,2} friend only partially resets when - * asked to via the XHCI interface, and may end up doing DMA - * at the wrong addresses, as it keeps the top 32bit of some - * addresses from its previous programming under obscure - * circumstances. - * Give it a good wack at probe time. Unfortunately, this - * needs to happen before we've had a chance to discover any - * quirk, or the system will be in a rather bad state. - */ - if (pdev->vendor == PCI_VENDOR_ID_RENESAS && - (pdev->device == 0x0014 || pdev->device == 0x0015)) - return true; - - return false; -} -EXPORT_SYMBOL_GPL(usb_xhci_needs_pci_reset); diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index 4ca0d9b7e463..63c633077d9e 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -16,7 +16,6 @@ void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev); void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev); void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); void sb800_prefetch(struct device *dev, int on); -bool usb_xhci_needs_pci_reset(struct pci_dev *pdev); bool usb_amd_pt_check_port(struct device *device, int port); #else struct pci_dev; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index f9c3947577fc..6218bfe54f52 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -590,14 +590,10 @@ static int uhci_start(struct usb_hcd *hcd) init_waitqueue_head(&uhci->waitqh); #ifdef UHCI_DEBUG_OPS - dentry = debugfs_create_file(hcd->self.bus_name, - S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, - uhci, &uhci_debug_operations); - if (!dentry) { - dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n"); - return -ENOMEM; - } - uhci->dentry = dentry; + uhci->dentry = debugfs_create_file(hcd->self.bus_name, + S_IFREG|S_IRUGO|S_IWUSR, + uhci_debugfs_root, uhci, + &uhci_debug_operations); #endif uhci->frame = dma_zalloc_coherent(uhci_dev(uhci), @@ -882,8 +878,6 @@ static int __init uhci_hcd_init(void) if (!errbuf) goto errbuf_failed; uhci_debugfs_root = debugfs_create_dir("uhci", usb_debug_root); - if (!uhci_debugfs_root) - goto debug_failed; #endif uhci_up_cachep = kmem_cache_create("uhci_urb_priv", @@ -918,7 +912,6 @@ up_failed: #if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG) debugfs_remove(uhci_debugfs_root); -debug_failed: kfree(errbuf); errbuf_failed: diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index c359bae7b754..1fbfd89d0a0f 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /** * xhci-dbgcap.c - xHCI debug capability support * diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h index e66ea0748ba3..ce0c6072bd48 100644 --- a/drivers/usb/host/xhci-dbgcap.h +++ b/drivers/usb/host/xhci-dbgcap.h @@ -1,4 +1,4 @@ - +/* SPDX-License-Identifier: GPL-2.0 */ /** * xhci-dbgcap.h - xHCI debug capability support * diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c index eb494ec547e8..aff79ff5aba4 100644 --- a/drivers/usb/host/xhci-dbgtty.c +++ b/drivers/usb/host/xhci-dbgtty.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /** * xhci-dbgtty.c - tty glue for xHCI debug capability * diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index 5851052d4668..cadc01336bf8 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -8,6 +8,7 @@ */ #include <linux/slab.h> +#include <linux/uaccess.h> #include "xhci.h" #include "xhci-debugfs.h" @@ -333,6 +334,67 @@ static const struct file_operations xhci_context_fops = { .release = single_release, }; + + +static int xhci_portsc_show(struct seq_file *s, void *unused) +{ + struct xhci_port *port = s->private; + u32 portsc; + + portsc = readl(port->addr); + seq_printf(s, "%s\n", xhci_decode_portsc(portsc)); + + return 0; +} + +static int xhci_port_open(struct inode *inode, struct file *file) +{ + return single_open(file, xhci_portsc_show, inode->i_private); +} + +static ssize_t xhci_port_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct xhci_port *port = s->private; + struct xhci_hcd *xhci = hcd_to_xhci(port->rhub->hcd); + char buf[32]; + u32 portsc; + unsigned long flags; + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + if (!strncmp(buf, "compliance", 10)) { + /* If CTC is clear, compliance is enabled by default */ + if (!HCC2_CTC(xhci->hcc_params2)) + return count; + spin_lock_irqsave(&xhci->lock, flags); + /* compliance mode can only be enabled on ports in RxDetect */ + portsc = readl(port->addr); + if ((portsc & PORT_PLS_MASK) != XDEV_RXDETECT) { + spin_unlock_irqrestore(&xhci->lock, flags); + return -EPERM; + } + portsc = xhci_port_state_to_neutral(portsc); + portsc &= ~PORT_PLS_MASK; + portsc |= PORT_LINK_STROBE | XDEV_COMP_MODE; + writel(portsc, port->addr); + spin_unlock_irqrestore(&xhci->lock, flags); + } else { + return -EINVAL; + } + return count; +} + +static const struct file_operations port_fops = { + .open = xhci_port_open, + .write = xhci_port_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static void xhci_debugfs_create_files(struct xhci_hcd *xhci, struct xhci_file_map *files, size_t nentries, void *data, @@ -449,6 +511,27 @@ void xhci_debugfs_remove_slot(struct xhci_hcd *xhci, int slot_id) dev->debugfs_private = NULL; } +static void xhci_debugfs_create_ports(struct xhci_hcd *xhci, + struct dentry *parent) +{ + unsigned int num_ports; + char port_name[8]; + struct xhci_port *port; + struct dentry *dir; + + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); + + parent = debugfs_create_dir("ports", parent); + + while (num_ports--) { + scnprintf(port_name, sizeof(port_name), "port%02d", + num_ports + 1); + dir = debugfs_create_dir(port_name, parent); + port = &xhci->hw_ports[num_ports]; + debugfs_create_file("portsc", 0644, dir, port, &port_fops); + } +} + void xhci_debugfs_init(struct xhci_hcd *xhci) { struct device *dev = xhci_to_hcd(xhci)->self.controller; @@ -497,6 +580,8 @@ void xhci_debugfs_init(struct xhci_hcd *xhci) xhci->debugfs_root); xhci->debugfs_slots = debugfs_create_dir("devices", xhci->debugfs_root); + + xhci_debugfs_create_ports(xhci, xhci->debugfs_root); } void xhci_debugfs_exit(struct xhci_hcd *xhci) diff --git a/drivers/usb/host/xhci-histb.c b/drivers/usb/host/xhci-histb.c new file mode 100644 index 000000000000..27f00160332e --- /dev/null +++ b/drivers/usb/host/xhci-histb.c @@ -0,0 +1,410 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * xHCI host controller driver for HiSilicon STB SoCs + * + * Copyright (C) 2017-2018 HiSilicon Co., Ltd. http://www.hisilicon.com + * + * Authors: Jianguo Sun <sunjianguo1@huawei.com> + */ + +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> + +#include "xhci.h" + +#define GTXTHRCFG 0xc108 +#define GRXTHRCFG 0xc10c +#define REG_GUSB2PHYCFG0 0xc200 +#define BIT_UTMI_8_16 BIT(3) +#define BIT_UTMI_ULPI BIT(4) +#define BIT_FREECLK_EXIST BIT(30) + +#define REG_GUSB3PIPECTL0 0xc2c0 +#define USB3_DEEMPHASIS_MASK GENMASK(2, 1) +#define USB3_DEEMPHASIS0 BIT(1) +#define USB3_TX_MARGIN1 BIT(4) + +struct xhci_hcd_histb { + struct device *dev; + struct usb_hcd *hcd; + void __iomem *ctrl; + struct clk *bus_clk; + struct clk *utmi_clk; + struct clk *pipe_clk; + struct clk *suspend_clk; + struct reset_control *soft_reset; +}; + +static inline struct xhci_hcd_histb *hcd_to_histb(struct usb_hcd *hcd) +{ + return dev_get_drvdata(hcd->self.controller); +} + +static int xhci_histb_config(struct xhci_hcd_histb *histb) +{ + struct device_node *np = histb->dev->of_node; + u32 regval; + + if (of_property_match_string(np, "phys-names", "inno") >= 0) { + /* USB2 PHY chose ulpi 8bit interface */ + regval = readl(histb->ctrl + REG_GUSB2PHYCFG0); + regval &= ~BIT_UTMI_ULPI; + regval &= ~(BIT_UTMI_8_16); + regval &= ~BIT_FREECLK_EXIST; + writel(regval, histb->ctrl + REG_GUSB2PHYCFG0); + } + + if (of_property_match_string(np, "phys-names", "combo") >= 0) { + /* + * write 0x010c0012 to GUSB3PIPECTL0 + * GUSB3PIPECTL0[5:3] = 010 : Tx Margin = 900mV , + * decrease TX voltage + * GUSB3PIPECTL0[2:1] = 01 : Tx Deemphasis = -3.5dB, + * refer to xHCI spec + */ + regval = readl(histb->ctrl + REG_GUSB3PIPECTL0); + regval &= ~USB3_DEEMPHASIS_MASK; + regval |= USB3_DEEMPHASIS0; + regval |= USB3_TX_MARGIN1; + writel(regval, histb->ctrl + REG_GUSB3PIPECTL0); + } + + writel(0x23100000, histb->ctrl + GTXTHRCFG); + writel(0x23100000, histb->ctrl + GRXTHRCFG); + + return 0; +} + +static int xhci_histb_clks_get(struct xhci_hcd_histb *histb) +{ + struct device *dev = histb->dev; + + histb->bus_clk = devm_clk_get(dev, "bus"); + if (IS_ERR(histb->bus_clk)) { + dev_err(dev, "fail to get bus clk\n"); + return PTR_ERR(histb->bus_clk); + } + + histb->utmi_clk = devm_clk_get(dev, "utmi"); + if (IS_ERR(histb->utmi_clk)) { + dev_err(dev, "fail to get utmi clk\n"); + return PTR_ERR(histb->utmi_clk); + } + + histb->pipe_clk = devm_clk_get(dev, "pipe"); + if (IS_ERR(histb->pipe_clk)) { + dev_err(dev, "fail to get pipe clk\n"); + return PTR_ERR(histb->pipe_clk); + } + + histb->suspend_clk = devm_clk_get(dev, "suspend"); + if (IS_ERR(histb->suspend_clk)) { + dev_err(dev, "fail to get suspend clk\n"); + return PTR_ERR(histb->suspend_clk); + } + + return 0; +} + +static int xhci_histb_host_enable(struct xhci_hcd_histb *histb) +{ + int ret; + + ret = clk_prepare_enable(histb->bus_clk); + if (ret) { + dev_err(histb->dev, "failed to enable bus clk\n"); + return ret; + } + + ret = clk_prepare_enable(histb->utmi_clk); + if (ret) { + dev_err(histb->dev, "failed to enable utmi clk\n"); + goto err_utmi_clk; + } + + ret = clk_prepare_enable(histb->pipe_clk); + if (ret) { + dev_err(histb->dev, "failed to enable pipe clk\n"); + goto err_pipe_clk; + } + + ret = clk_prepare_enable(histb->suspend_clk); + if (ret) { + dev_err(histb->dev, "failed to enable suspend clk\n"); + goto err_suspend_clk; + } + + reset_control_deassert(histb->soft_reset); + + return 0; + +err_suspend_clk: + clk_disable_unprepare(histb->pipe_clk); +err_pipe_clk: + clk_disable_unprepare(histb->utmi_clk); +err_utmi_clk: + clk_disable_unprepare(histb->bus_clk); + + return ret; +} + +static void xhci_histb_host_disable(struct xhci_hcd_histb *histb) +{ + reset_control_assert(histb->soft_reset); + + clk_disable_unprepare(histb->suspend_clk); + clk_disable_unprepare(histb->pipe_clk); + clk_disable_unprepare(histb->utmi_clk); + clk_disable_unprepare(histb->bus_clk); +} + +static void xhci_histb_quirks(struct device *dev, struct xhci_hcd *xhci) +{ + /* + * As of now platform drivers don't provide MSI support so we ensure + * here that the generic code does not try to make a pci_dev from our + * dev struct in order to setup MSI + */ + xhci->quirks |= XHCI_PLAT; +} + +/* called during probe() after chip reset completes */ +static int xhci_histb_setup(struct usb_hcd *hcd) +{ + struct xhci_hcd_histb *histb = hcd_to_histb(hcd); + int ret; + + if (usb_hcd_is_primary_hcd(hcd)) { + ret = xhci_histb_config(histb); + if (ret) + return ret; + } + + return xhci_gen_setup(hcd, xhci_histb_quirks); +} + +static const struct xhci_driver_overrides xhci_histb_overrides __initconst = { + .reset = xhci_histb_setup, +}; + +static struct hc_driver __read_mostly xhci_histb_hc_driver; +static int xhci_histb_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct xhci_hcd_histb *histb; + const struct hc_driver *driver; + struct usb_hcd *hcd; + struct xhci_hcd *xhci; + struct resource *res; + int irq; + int ret = -ENODEV; + + if (usb_disabled()) + return -ENODEV; + + driver = &xhci_histb_hc_driver; + histb = devm_kzalloc(dev, sizeof(*histb), GFP_KERNEL); + if (!histb) + return -ENOMEM; + + histb->dev = dev; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + histb->ctrl = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(histb->ctrl)) + return PTR_ERR(histb->ctrl); + + ret = xhci_histb_clks_get(histb); + if (ret) + return ret; + + histb->soft_reset = devm_reset_control_get(dev, "soft"); + if (IS_ERR(histb->soft_reset)) { + dev_err(dev, "failed to get soft reset\n"); + return PTR_ERR(histb->soft_reset); + } + + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + device_enable_async_suspend(dev); + + /* Initialize dma_mask and coherent_dma_mask to 32-bits */ + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + + hcd = usb_create_hcd(driver, dev, dev_name(dev)); + if (!hcd) { + ret = -ENOMEM; + goto disable_pm; + } + + hcd->regs = histb->ctrl; + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + histb->hcd = hcd; + dev_set_drvdata(hcd->self.controller, histb); + + ret = xhci_histb_host_enable(histb); + if (ret) + goto put_hcd; + + xhci = hcd_to_xhci(hcd); + + device_wakeup_enable(hcd->self.controller); + + xhci->main_hcd = hcd; + xhci->shared_hcd = usb_create_shared_hcd(driver, dev, dev_name(dev), + hcd); + if (!xhci->shared_hcd) { + ret = -ENOMEM; + goto disable_host; + } + + if (device_property_read_bool(dev, "usb2-lpm-disable")) + xhci->quirks |= XHCI_HW_LPM_DISABLE; + + if (device_property_read_bool(dev, "usb3-lpm-capable")) + xhci->quirks |= XHCI_LPM_SUPPORT; + + /* imod_interval is the interrupt moderation value in nanoseconds. */ + xhci->imod_interval = 40000; + device_property_read_u32(dev, "imod-interval-ns", + &xhci->imod_interval); + + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) + goto put_usb3_hcd; + + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + xhci->shared_hcd->can_do_streams = 1; + + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); + if (ret) + goto dealloc_usb2_hcd; + + device_enable_async_suspend(dev); + pm_runtime_put_noidle(dev); + + /* + * Prevent runtime pm from being on as default, users should enable + * runtime pm using power/control in sysfs. + */ + pm_runtime_forbid(dev); + + return 0; + +dealloc_usb2_hcd: + usb_remove_hcd(hcd); +put_usb3_hcd: + usb_put_hcd(xhci->shared_hcd); +disable_host: + xhci_histb_host_disable(histb); +put_hcd: + usb_put_hcd(hcd); +disable_pm: + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + + return ret; +} + +static int xhci_histb_remove(struct platform_device *dev) +{ + struct xhci_hcd_histb *histb = platform_get_drvdata(dev); + struct usb_hcd *hcd = histb->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + xhci->xhc_state |= XHCI_STATE_REMOVING; + + usb_remove_hcd(xhci->shared_hcd); + device_wakeup_disable(&dev->dev); + + usb_remove_hcd(hcd); + usb_put_hcd(xhci->shared_hcd); + + xhci_histb_host_disable(histb); + usb_put_hcd(hcd); + pm_runtime_put_sync(&dev->dev); + pm_runtime_disable(&dev->dev); + + return 0; +} + +static int __maybe_unused xhci_histb_suspend(struct device *dev) +{ + struct xhci_hcd_histb *histb = dev_get_drvdata(dev); + struct usb_hcd *hcd = histb->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int ret; + + ret = xhci_suspend(xhci, device_may_wakeup(dev)); + + if (!device_may_wakeup(dev)) + xhci_histb_host_disable(histb); + + return ret; +} + +static int __maybe_unused xhci_histb_resume(struct device *dev) +{ + struct xhci_hcd_histb *histb = dev_get_drvdata(dev); + struct usb_hcd *hcd = histb->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + if (!device_may_wakeup(dev)) + xhci_histb_host_enable(histb); + + return xhci_resume(xhci, 0); +} + +static const struct dev_pm_ops xhci_histb_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(xhci_histb_suspend, xhci_histb_resume) +}; +#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &xhci_histb_pm_ops : NULL) + +#ifdef CONFIG_OF +static const struct of_device_id histb_xhci_of_match[] = { + { .compatible = "hisilicon,hi3798cv200-xhci"}, + { }, +}; +MODULE_DEVICE_TABLE(of, histb_xhci_of_match); +#endif + +static struct platform_driver histb_xhci_driver = { + .probe = xhci_histb_probe, + .remove = xhci_histb_remove, + .driver = { + .name = "xhci-histb", + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(histb_xhci_of_match), + }, +}; +MODULE_ALIAS("platform:xhci-histb"); + +static int __init xhci_histb_init(void) +{ + xhci_init_driver(&xhci_histb_hc_driver, &xhci_histb_overrides); + return platform_driver_register(&histb_xhci_driver); +} +module_init(xhci_histb_init); + +static void __exit xhci_histb_exit(void) +{ + platform_driver_unregister(&histb_xhci_driver); +} +module_exit(xhci_histb_exit); + +MODULE_DESCRIPTION("HiSilicon STB xHCI Host Controller Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 32cd52ca8318..a4b95d019f84 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -189,9 +189,10 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8]; u32 portsc; unsigned int i; + struct xhci_hub *rhub; - ports = xhci->num_usb2_ports; - + rhub = &xhci->usb2_rhub; + ports = rhub->num_ports; xhci_common_hub_descriptor(xhci, desc, ports); desc->bDescriptorType = USB_DT_HUB; temp = 1 + (ports / 8); @@ -202,7 +203,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, */ memset(port_removable, 0, sizeof(port_removable)); for (i = 0; i < ports; i++) { - portsc = readl(xhci->usb2_ports[i]); + portsc = readl(rhub->ports[i]->addr); /* If a device is removable, PORTSC reports a 0, same as in the * hub descriptor DeviceRemovable bits. */ @@ -241,8 +242,10 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, u16 port_removable; u32 portsc; unsigned int i; + struct xhci_hub *rhub; - ports = xhci->num_usb3_ports; + rhub = &xhci->usb3_rhub; + ports = rhub->num_ports; xhci_common_hub_descriptor(xhci, desc, ports); desc->bDescriptorType = USB_DT_SS_HUB; desc->bDescLength = USB_DT_SS_HUB_SIZE; @@ -256,7 +259,7 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, port_removable = 0; /* bit 0 is reserved, bit 1 is for port 1, etc. */ for (i = 0; i < ports; i++) { - portsc = readl(xhci->usb3_ports[i]); + portsc = readl(rhub->ports[i]->addr); if (portsc & PORT_DEV_REMOVE) port_removable |= 1 << (i + 1); } @@ -538,28 +541,13 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue, port_change_bit, wIndex, port_status); } -static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array) +struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd) { - int max_ports; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - if (hcd->speed >= HCD_USB3) { - max_ports = xhci->num_usb3_ports; - *port_array = xhci->usb3_ports; - } else { - max_ports = xhci->num_usb2_ports; - *port_array = xhci->usb2_ports; - } - - return max_ports; -} - -static __le32 __iomem *xhci_get_port_io_addr(struct usb_hcd *hcd, int index) -{ - __le32 __iomem **port_array; - - xhci_get_ports(hcd, &port_array); - return port_array[index]; + if (hcd->speed >= HCD_USB3) + return &xhci->usb3_rhub; + return &xhci->usb2_rhub; } /* @@ -570,21 +558,23 @@ static __le32 __iomem *xhci_get_port_io_addr(struct usb_hcd *hcd, int index) static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, bool on, unsigned long *flags) { - __le32 __iomem *addr; + struct xhci_hub *rhub; + struct xhci_port *port; u32 temp; - addr = xhci_get_port_io_addr(hcd, index); - temp = readl(addr); + rhub = xhci_get_rhub(hcd); + port = rhub->ports[index]; + temp = readl(port->addr); temp = xhci_port_state_to_neutral(temp); if (on) { /* Power on */ - writel(temp | PORT_POWER, addr); - temp = readl(addr); + writel(temp | PORT_POWER, port->addr); + temp = readl(port->addr); xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", index, temp); } else { /* Power off */ - writel(temp & ~PORT_POWER, addr); + writel(temp & ~PORT_POWER, port->addr); } spin_unlock_irqrestore(&xhci->lock, *flags); @@ -600,13 +590,13 @@ static void xhci_port_set_test_mode(struct xhci_hcd *xhci, u16 test_mode, u16 wIndex) { u32 temp; - __le32 __iomem *addr; + struct xhci_port *port; - /* xhci only supports test mode for usb2 ports, i.e. xhci->main_hcd */ - addr = xhci_get_port_io_addr(xhci->main_hcd, wIndex); - temp = readl(addr + PORTPMSC); + /* xhci only supports test mode for usb2 ports */ + port = xhci->usb2_rhub.ports[wIndex]; + temp = readl(port->addr + PORTPMSC); temp |= test_mode << PORT_TEST_MODE_SHIFT; - writel(temp, addr + PORTPMSC); + writel(temp, port->addr + PORTPMSC); xhci->test_mode = test_mode; if (test_mode == TEST_FORCE_EN) xhci_start(xhci); @@ -633,10 +623,10 @@ static int xhci_enter_test_mode(struct xhci_hcd *xhci, /* Put all ports to the Disable state by clear PP */ xhci_dbg(xhci, "Disable all port (PP = 0)\n"); /* Power off USB3 ports*/ - for (i = 0; i < xhci->num_usb3_ports; i++) + for (i = 0; i < xhci->usb3_rhub.num_ports; i++) xhci_set_port_power(xhci, xhci->shared_hcd, i, false, flags); /* Power off USB2 ports*/ - for (i = 0; i < xhci->num_usb2_ports; i++) + for (i = 0; i < xhci->usb2_rhub.num_ports; i++) xhci_set_port_power(xhci, xhci->main_hcd, i, false, flags); /* Stop the controller */ xhci_dbg(xhci, "Stop controller\n"); @@ -672,24 +662,24 @@ static int xhci_exit_test_mode(struct xhci_hcd *xhci) return xhci_reset(xhci); } -void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, - int port_id, u32 link_state) +void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port, + u32 link_state) { u32 temp; - temp = readl(port_array[port_id]); + temp = readl(port->addr); temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | link_state; - writel(temp, port_array[port_id]); + writel(temp, port->addr); } static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, - __le32 __iomem **port_array, int port_id, u16 wake_mask) + struct xhci_port *port, u16 wake_mask) { u32 temp; - temp = readl(port_array[port_id]); + temp = readl(port->addr); temp = xhci_port_state_to_neutral(temp); if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT) @@ -707,20 +697,20 @@ static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, else temp &= ~PORT_WKOC_E; - writel(temp, port_array[port_id]); + writel(temp, port->addr); } /* Test and clear port RWC bit */ -void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, - int port_id, u32 port_bit) +void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port, + u32 port_bit) { u32 temp; - temp = readl(port_array[port_id]); + temp = readl(port->addr); if (temp & port_bit) { temp = xhci_port_state_to_neutral(temp); temp |= port_bit; - writel(temp, port_array[port_id]); + writel(temp, port->addr); } } @@ -794,7 +784,7 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex) { - u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1); + u32 all_ports_seen_u0 = ((1 << xhci->usb3_rhub.num_ports) - 1); bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0); if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK)) @@ -840,8 +830,7 @@ static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li) */ static u32 xhci_get_port_status(struct usb_hcd *hcd, struct xhci_bus_state *bus_state, - __le32 __iomem **port_array, - u16 wIndex, u32 raw_port_status, + u16 wIndex, u32 raw_port_status, unsigned long flags) __releases(&xhci->lock) __acquires(&xhci->lock) @@ -849,6 +838,11 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 status = 0; int slot_id; + struct xhci_hub *rhub; + struct xhci_port *port; + + rhub = xhci_get_rhub(hcd); + port = rhub->ports[wIndex]; /* wPortChange bits */ if (raw_port_status & PORT_CSC) @@ -919,10 +913,8 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, set_bit(wIndex, &bus_state->rexit_ports); - xhci_test_and_clear_bit(xhci, port_array, wIndex, - PORT_PLC); - xhci_set_link_state(xhci, port_array, wIndex, - XDEV_U0); + xhci_test_and_clear_bit(xhci, port, PORT_PLC); + xhci_set_link_state(xhci, port, XDEV_U0); spin_unlock_irqrestore(&xhci->lock, flags); time_left = wait_for_completion_timeout( @@ -940,7 +932,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, } xhci_ring_device(xhci, slot_id); } else { - int port_status = readl(port_array[wIndex]); + int port_status = readl(port->addr); xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", XHCI_MAX_REXIT_TIMEOUT, port_status); @@ -1024,15 +1016,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, unsigned long flags; u32 temp, status; int retval = 0; - __le32 __iomem **port_array; int slot_id; struct xhci_bus_state *bus_state; u16 link_state = 0; u16 wake_mask = 0; u16 timeout = 0; u16 test_mode = 0; + struct xhci_hub *rhub; + struct xhci_port **ports; - max_ports = xhci_get_ports(hcd, &port_array); + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; spin_lock_irqsave(&xhci->lock, flags); @@ -1070,15 +1065,15 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if (!wIndex || wIndex > max_ports) goto error; wIndex--; - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; break; } trace_xhci_get_port_status(wIndex, temp); - status = xhci_get_port_status(hcd, bus_state, port_array, - wIndex, temp, flags); + status = xhci_get_port_status(hcd, bus_state, wIndex, temp, + flags); if (status == 0xffffffff) goto error; @@ -1096,7 +1091,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, retval = -EINVAL; break; } - port_li = readl(port_array[wIndex] + PORTLI); + port_li = readl(ports[wIndex]->addr + PORTLI); status = xhci_get_ext_port_status(temp, port_li); put_unaligned_le32(cpu_to_le32(status), &buf[4]); } @@ -1114,7 +1109,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if (!wIndex || wIndex > max_ports) goto error; wIndex--; - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1124,10 +1119,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* FIXME: What new port features do we need to support? */ switch (wValue) { case USB_PORT_FEAT_SUSPEND: - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if ((temp & PORT_PLS_MASK) != XDEV_U0) { /* Resume the port to U0 first */ - xhci_set_link_state(xhci, port_array, wIndex, + xhci_set_link_state(xhci, ports[wIndex], XDEV_U0); spin_unlock_irqrestore(&xhci->lock, flags); msleep(10); @@ -1137,7 +1132,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, * a port unless the port reports that it is in the * enabled (PED = ‘1’,PLS < ‘3’) state. */ - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) || (temp & PORT_PLS_MASK) >= XDEV_U3) { xhci_warn(xhci, "USB core suspending device not in U0/U1/U2.\n"); @@ -1155,18 +1150,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_stop_device(xhci, slot_id, 1); spin_lock_irqsave(&xhci->lock, flags); - xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3); + xhci_set_link_state(xhci, ports[wIndex], XDEV_U3); spin_unlock_irqrestore(&xhci->lock, flags); msleep(10); /* wait device to enter */ spin_lock_irqsave(&xhci->lock, flags); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); bus_state->suspended_ports |= 1 << wIndex; break; case USB_PORT_FEAT_LINK_STATE: - temp = readl(port_array[wIndex]); - + temp = readl(ports[wIndex]->addr); /* Disable port */ if (link_state == USB_SS_PORT_LS_SS_DISABLED) { xhci_dbg(xhci, "Disable port %d\n", wIndex); @@ -1178,17 +1172,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp |= PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | PORT_RC | PORT_PLC | PORT_CEC; - writel(temp | PORT_PE, port_array[wIndex]); - temp = readl(port_array[wIndex]); + writel(temp | PORT_PE, ports[wIndex]->addr); + temp = readl(ports[wIndex]->addr); break; } /* Put link in RxDetect (enable port) */ if (link_state == USB_SS_PORT_LS_RX_DETECT) { xhci_dbg(xhci, "Enable port %d\n", wIndex); - xhci_set_link_state(xhci, port_array, wIndex, - link_state); - temp = readl(port_array[wIndex]); + xhci_set_link_state(xhci, ports[wIndex], + link_state); + temp = readl(ports[wIndex]->addr); break; } @@ -1219,9 +1213,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_dbg(xhci, "Enable compliance mode transition for port %d\n", wIndex); - xhci_set_link_state(xhci, port_array, wIndex, + xhci_set_link_state(xhci, ports[wIndex], link_state); - temp = readl(port_array[wIndex]); + + temp = readl(ports[wIndex]->addr); break; } /* Port must be enabled */ @@ -1248,14 +1243,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } } - xhci_set_link_state(xhci, port_array, wIndex, - link_state); + xhci_set_link_state(xhci, ports[wIndex], link_state); spin_unlock_irqrestore(&xhci->lock, flags); msleep(20); /* wait device to enter */ spin_lock_irqsave(&xhci->lock, flags); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (link_state == USB_SS_PORT_LS_U3) bus_state->suspended_ports |= 1 << wIndex; break; @@ -1270,40 +1264,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; case USB_PORT_FEAT_RESET: temp = (temp | PORT_RESET); - writel(temp, port_array[wIndex]); + writel(temp, ports[wIndex]->addr); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp); break; case USB_PORT_FEAT_REMOTE_WAKE_MASK: - xhci_set_remote_wake_mask(xhci, port_array, - wIndex, wake_mask); - temp = readl(port_array[wIndex]); + xhci_set_remote_wake_mask(xhci, ports[wIndex], + wake_mask); + temp = readl(ports[wIndex]->addr); xhci_dbg(xhci, "set port remote wake mask, " "actual port %d status = 0x%x\n", wIndex, temp); break; case USB_PORT_FEAT_BH_PORT_RESET: temp |= PORT_WR; - writel(temp, port_array[wIndex]); - - temp = readl(port_array[wIndex]); + writel(temp, ports[wIndex]->addr); + temp = readl(ports[wIndex]->addr); break; case USB_PORT_FEAT_U1_TIMEOUT: if (hcd->speed < HCD_USB3) goto error; - temp = readl(port_array[wIndex] + PORTPMSC); + temp = readl(ports[wIndex]->addr + PORTPMSC); temp &= ~PORT_U1_TIMEOUT_MASK; temp |= PORT_U1_TIMEOUT(timeout); - writel(temp, port_array[wIndex] + PORTPMSC); + writel(temp, ports[wIndex]->addr + PORTPMSC); break; case USB_PORT_FEAT_U2_TIMEOUT: if (hcd->speed < HCD_USB3) goto error; - temp = readl(port_array[wIndex] + PORTPMSC); + temp = readl(ports[wIndex]->addr + PORTPMSC); temp &= ~PORT_U2_TIMEOUT_MASK; temp |= PORT_U2_TIMEOUT(timeout); - writel(temp, port_array[wIndex] + PORTPMSC); + writel(temp, ports[wIndex]->addr + PORTPMSC); break; case USB_PORT_FEAT_TEST: /* 4.19.6 Port Test Modes (USB2 Test Mode) */ @@ -1318,13 +1311,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; } /* unblock any posted writes */ - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); break; case ClearPortFeature: if (!wIndex || wIndex > max_ports) goto error; wIndex--; - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1334,7 +1327,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_port_state_to_neutral(temp); switch (wValue) { case USB_PORT_FEAT_SUSPEND: - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n"); xhci_dbg(xhci, "PORTSC %04x\n", temp); if (temp & PORT_RESET) @@ -1344,12 +1337,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; set_bit(wIndex, &bus_state->resuming_ports); - xhci_set_link_state(xhci, port_array, wIndex, - XDEV_RESUME); + xhci_set_link_state(xhci, ports[wIndex], + XDEV_RESUME); spin_unlock_irqrestore(&xhci->lock, flags); msleep(USB_RESUME_TIMEOUT); spin_lock_irqsave(&xhci->lock, flags); - xhci_set_link_state(xhci, port_array, wIndex, + xhci_set_link_state(xhci, ports[wIndex], XDEV_U0); clear_bit(wIndex, &bus_state->resuming_ports); } @@ -1374,11 +1367,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case USB_PORT_FEAT_C_PORT_LINK_STATE: case USB_PORT_FEAT_C_PORT_CONFIG_ERROR: xhci_clear_port_change_bit(xhci, wValue, wIndex, - port_array[wIndex], temp); + ports[wIndex]->addr, temp); break; case USB_PORT_FEAT_ENABLE: xhci_disable_port(hcd, xhci, wIndex, - port_array[wIndex], temp); + ports[wIndex]->addr, temp); break; case USB_PORT_FEAT_POWER: xhci_set_port_power(xhci, hcd, wIndex, false, &flags); @@ -1415,11 +1408,14 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) int i, retval; struct xhci_hcd *xhci = hcd_to_xhci(hcd); int max_ports; - __le32 __iomem **port_array; struct xhci_bus_state *bus_state; bool reset_change = false; + struct xhci_hub *rhub; + struct xhci_port **ports; - max_ports = xhci_get_ports(hcd, &port_array); + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; /* Initial status is no changes */ @@ -1437,7 +1433,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ for (i = 0; i < max_ports; i++) { - temp = readl(port_array[i]); + temp = readl(ports[i]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1469,11 +1465,14 @@ int xhci_bus_suspend(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); int max_ports, port_index; - __le32 __iomem **port_array; struct xhci_bus_state *bus_state; unsigned long flags; + struct xhci_hub *rhub; + struct xhci_port **ports; - max_ports = xhci_get_ports(hcd, &port_array); + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; spin_lock_irqsave(&xhci->lock, flags); @@ -1494,7 +1493,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) u32 t1, t2; int slot_id; - t1 = readl(port_array[port_index]); + t1 = readl(ports[port_index]->addr); t2 = xhci_port_state_to_neutral(t1); if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { @@ -1534,7 +1533,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t1 = xhci_port_state_to_neutral(t1); if (t1 != t2) - writel(t2, port_array[port_index]); + writel(t2, ports[port_index]->addr); } hcd->state = HC_STATE_SUSPENDED; bus_state->next_statechange = jiffies + msecs_to_jiffies(10); @@ -1547,12 +1546,11 @@ int xhci_bus_suspend(struct usb_hcd *hcd) * warm reset a USB3 device stuck in polling or compliance mode after resume. * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 */ -static bool xhci_port_missing_cas_quirk(int port_index, - __le32 __iomem **port_array) +static bool xhci_port_missing_cas_quirk(struct xhci_port *port) { u32 portsc; - portsc = readl(port_array[port_index]); + portsc = readl(port->addr); /* if any of these are set we are not stuck */ if (portsc & (PORT_CONNECT | PORT_CAS)) @@ -1565,9 +1563,9 @@ static bool xhci_port_missing_cas_quirk(int port_index, /* clear wakeup/change bits, and do a warm port reset */ portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); portsc |= PORT_WR; - writel(portsc, port_array[port_index]); + writel(portsc, port->addr); /* flush write */ - readl(port_array[port_index]); + readl(port->addr); return true; } @@ -1575,15 +1573,18 @@ int xhci_bus_resume(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_bus_state *bus_state; - __le32 __iomem **port_array; unsigned long flags; int max_ports, port_index; int slot_id; int sret; u32 next_state; u32 temp, portsc; + struct xhci_hub *rhub; + struct xhci_port **ports; - max_ports = xhci_get_ports(hcd, &port_array); + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; if (time_before(jiffies, bus_state->next_statechange)) @@ -1608,12 +1609,12 @@ int xhci_bus_resume(struct usb_hcd *hcd) port_index = max_ports; while (port_index--) { - portsc = readl(port_array[port_index]); + portsc = readl(ports[port_index]->addr); /* warm reset CAS limited ports stuck in polling/compliance */ if ((xhci->quirks & XHCI_MISSING_CAS) && (hcd->speed >= HCD_USB3) && - xhci_port_missing_cas_quirk(port_index, port_array)) { + xhci_port_missing_cas_quirk(ports[port_index])) { xhci_dbg(xhci, "reset stuck port %d\n", port_index); clear_bit(port_index, &bus_state->bus_suspended); continue; @@ -1637,7 +1638,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) } /* disable wake for all ports, write new link state if needed */ portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); - writel(portsc, port_array[port_index]); + writel(portsc, ports[port_index]->addr); } /* USB2 specific resume signaling delay and U0 link state transition */ @@ -1650,23 +1651,22 @@ int xhci_bus_resume(struct usb_hcd *hcd) for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) { /* Clear PLC to poll it later for U0 transition */ - xhci_test_and_clear_bit(xhci, port_array, port_index, + xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC); - xhci_set_link_state(xhci, port_array, port_index, - XDEV_U0); + xhci_set_link_state(xhci, ports[port_index], XDEV_U0); } } /* poll for U0 link state complete, both USB2 and USB3 */ for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) { - sret = xhci_handshake(port_array[port_index], PORT_PLC, + sret = xhci_handshake(ports[port_index]->addr, PORT_PLC, PORT_PLC, 10 * 1000); if (sret) { xhci_warn(xhci, "port %d resume PLC timeout\n", port_index); continue; } - xhci_test_and_clear_bit(xhci, port_array, port_index, PORT_PLC); + xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC); slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1); if (slot_id) xhci_ring_device(xhci, slot_id); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index e5ace8995b3b..4fe74711938e 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -33,8 +33,9 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, struct xhci_segment *seg; dma_addr_t dma; int i; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; - seg = kzalloc(sizeof *seg, flags); + seg = kzalloc_node(sizeof(*seg), flags, dev_to_node(dev)); if (!seg) return NULL; @@ -45,7 +46,8 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, } if (max_packet) { - seg->bounce_buf = kzalloc(max_packet, flags); + seg->bounce_buf = kzalloc_node(max_packet, flags, + dev_to_node(dev)); if (!seg->bounce_buf) { dma_pool_free(xhci->segment_pool, seg->trbs, dma); kfree(seg); @@ -363,8 +365,9 @@ struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, { struct xhci_ring *ring; int ret; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; - ring = kzalloc(sizeof *(ring), flags); + ring = kzalloc_node(sizeof(*ring), flags, dev_to_node(dev)); if (!ring) return NULL; @@ -458,11 +461,12 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci, int type, gfp_t flags) { struct xhci_container_ctx *ctx; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; if ((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT)) return NULL; - ctx = kzalloc(sizeof(*ctx), flags); + ctx = kzalloc_node(sizeof(*ctx), flags, dev_to_node(dev)); if (!ctx) return NULL; @@ -615,6 +619,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, struct xhci_ring *cur_ring; u64 addr; int ret; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; xhci_dbg(xhci, "Allocating %u streams and %u " "stream context array entries.\n", @@ -625,7 +630,8 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, } xhci->cmd_ring_reserved_trbs++; - stream_info = kzalloc(sizeof(struct xhci_stream_info), mem_flags); + stream_info = kzalloc_node(sizeof(*stream_info), mem_flags, + dev_to_node(dev)); if (!stream_info) goto cleanup_trbs; @@ -633,9 +639,9 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, stream_info->num_stream_ctxs = num_stream_ctxs; /* Initialize the array of virtual pointers to stream rings. */ - stream_info->stream_rings = kzalloc( - sizeof(struct xhci_ring *)*num_streams, - mem_flags); + stream_info->stream_rings = kcalloc_node( + num_streams, sizeof(struct xhci_ring *), mem_flags, + dev_to_node(dev)); if (!stream_info->stream_rings) goto cleanup_info; @@ -831,6 +837,7 @@ int xhci_alloc_tt_info(struct xhci_hcd *xhci, struct xhci_tt_bw_info *tt_info; unsigned int num_ports; int i, j; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; if (!tt->multi) num_ports = 1; @@ -840,7 +847,8 @@ int xhci_alloc_tt_info(struct xhci_hcd *xhci, for (i = 0; i < num_ports; i++, tt_info++) { struct xhci_interval_bw_table *bw_table; - tt_info = kzalloc(sizeof(*tt_info), mem_flags); + tt_info = kzalloc_node(sizeof(*tt_info), mem_flags, + dev_to_node(dev)); if (!tt_info) goto free_tts; INIT_LIST_HEAD(&tt_info->tt_list); @@ -1054,8 +1062,7 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, /* * The xHCI roothub may have ports of differing speeds in any order in the port - * status registers. xhci->port_array provides an array of the port speed for - * each offset into the port status registers. + * status registers. * * The xHCI hardware wants to know the roothub port number that the USB device * is attached to (or the roothub port its ancestor hub is attached to). All we @@ -1642,7 +1649,8 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) if (!num_sp) return 0; - xhci->scratchpad = kzalloc(sizeof(*xhci->scratchpad), flags); + xhci->scratchpad = kzalloc_node(sizeof(*xhci->scratchpad), flags, + dev_to_node(dev)); if (!xhci->scratchpad) goto fail_sp; @@ -1652,7 +1660,8 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) if (!xhci->scratchpad->sp_array) goto fail_sp2; - xhci->scratchpad->sp_buffers = kzalloc(sizeof(void *) * num_sp, flags); + xhci->scratchpad->sp_buffers = kcalloc_node(num_sp, sizeof(void *), + flags, dev_to_node(dev)); if (!xhci->scratchpad->sp_buffers) goto fail_sp3; @@ -1720,14 +1729,16 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, bool allocate_completion, gfp_t mem_flags) { struct xhci_command *command; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; - command = kzalloc(sizeof(*command), mem_flags); + command = kzalloc_node(sizeof(*command), mem_flags, dev_to_node(dev)); if (!command) return NULL; if (allocate_completion) { command->completion = - kzalloc(sizeof(struct completion), mem_flags); + kzalloc_node(sizeof(struct completion), mem_flags, + dev_to_node(dev)); if (!command->completion) { kfree(command); return NULL; @@ -1890,18 +1901,18 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) no_bw: xhci->cmd_ring_reserved_trbs = 0; - xhci->num_usb2_ports = 0; - xhci->num_usb3_ports = 0; + xhci->usb2_rhub.num_ports = 0; + xhci->usb3_rhub.num_ports = 0; xhci->num_active_eps = 0; - kfree(xhci->usb2_ports); - kfree(xhci->usb3_ports); - kfree(xhci->port_array); + kfree(xhci->usb2_rhub.ports); + kfree(xhci->usb3_rhub.ports); + kfree(xhci->hw_ports); kfree(xhci->rh_bw); kfree(xhci->ext_caps); - xhci->usb2_ports = NULL; - xhci->usb3_ports = NULL; - xhci->port_array = NULL; + xhci->usb2_rhub.ports = NULL; + xhci->usb3_rhub.ports = NULL; + xhci->hw_ports = NULL; xhci->rh_bw = NULL; xhci->ext_caps = NULL; @@ -2100,6 +2111,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, int i; u8 major_revision, minor_revision; struct xhci_hub *rhub; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; temp = readl(addr); major_revision = XHCI_EXT_PORT_MAJOR(temp); @@ -2136,8 +2148,8 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, rhub->psi_count = XHCI_EXT_PORT_PSIC(temp); if (rhub->psi_count) { - rhub->psi = kcalloc(rhub->psi_count, sizeof(*rhub->psi), - GFP_KERNEL); + rhub->psi = kcalloc_node(rhub->psi_count, sizeof(*rhub->psi), + GFP_KERNEL, dev_to_node(dev)); if (!rhub->psi) rhub->psi_count = 0; @@ -2186,36 +2198,53 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, port_offset--; for (i = port_offset; i < (port_offset + port_count); i++) { + struct xhci_port *hw_port = &xhci->hw_ports[i]; /* Duplicate entry. Ignore the port if the revisions differ. */ - if (xhci->port_array[i] != 0) { + if (hw_port->rhub) { xhci_warn(xhci, "Duplicate port entry, Ext Cap %p," " port %u\n", addr, i); xhci_warn(xhci, "Port was marked as USB %u, " "duplicated as USB %u\n", - xhci->port_array[i], major_revision); + hw_port->rhub->maj_rev, major_revision); /* Only adjust the roothub port counts if we haven't * found a similar duplicate. */ - if (xhci->port_array[i] != major_revision && - xhci->port_array[i] != DUPLICATE_ENTRY) { - if (xhci->port_array[i] == 0x03) - xhci->num_usb3_ports--; - else - xhci->num_usb2_ports--; - xhci->port_array[i] = DUPLICATE_ENTRY; + if (hw_port->rhub != rhub && + hw_port->hcd_portnum != DUPLICATE_ENTRY) { + hw_port->rhub->num_ports--; + hw_port->hcd_portnum = DUPLICATE_ENTRY; } - /* FIXME: Should we disable the port? */ continue; } - xhci->port_array[i] = major_revision; - if (major_revision == 0x03) - xhci->num_usb3_ports++; - else - xhci->num_usb2_ports++; + hw_port->rhub = rhub; + rhub->num_ports++; } /* FIXME: Should we disable ports not in the Extended Capabilities? */ } +static void xhci_create_rhub_port_array(struct xhci_hcd *xhci, + struct xhci_hub *rhub, gfp_t flags) +{ + int port_index = 0; + int i; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; + + if (!rhub->num_ports) + return; + rhub->ports = kcalloc_node(rhub->num_ports, sizeof(rhub->ports), flags, + dev_to_node(dev)); + for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) { + if (xhci->hw_ports[i].rhub != rhub || + xhci->hw_ports[i].hcd_portnum == DUPLICATE_ENTRY) + continue; + xhci->hw_ports[i].hcd_portnum = port_index; + rhub->ports[port_index] = &xhci->hw_ports[i]; + port_index++; + if (port_index == rhub->num_ports) + break; + } +} + /* * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that * specify what speeds each port is supposed to be. We can't count on the port @@ -2228,16 +2257,25 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) void __iomem *base; u32 offset; unsigned int num_ports; - int i, j, port_index; + int i, j; int cap_count = 0; u32 cap_start; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; num_ports = HCS_MAX_PORTS(xhci->hcs_params1); - xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags); - if (!xhci->port_array) + xhci->hw_ports = kcalloc_node(num_ports, sizeof(*xhci->hw_ports), + flags, dev_to_node(dev)); + if (!xhci->hw_ports) return -ENOMEM; - xhci->rh_bw = kzalloc(sizeof(*xhci->rh_bw)*num_ports, flags); + for (i = 0; i < num_ports; i++) { + xhci->hw_ports[i].addr = &xhci->op_regs->port_status_base + + NUM_PORT_REGS * i; + xhci->hw_ports[i].hw_portnum = i; + } + + xhci->rh_bw = kzalloc_node(sizeof(*xhci->rh_bw)*num_ports, flags, + dev_to_node(dev)); if (!xhci->rh_bw) return -ENOMEM; for (i = 0; i < num_ports; i++) { @@ -2264,7 +2302,8 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) XHCI_EXT_CAPS_PROTOCOL); } - xhci->ext_caps = kzalloc(sizeof(*xhci->ext_caps) * cap_count, flags); + xhci->ext_caps = kcalloc_node(cap_count, sizeof(*xhci->ext_caps), + flags, dev_to_node(dev)); if (!xhci->ext_caps) return -ENOMEM; @@ -2272,86 +2311,44 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) while (offset) { xhci_add_in_port(xhci, num_ports, base + offset, cap_count); - if (xhci->num_usb2_ports + xhci->num_usb3_ports == num_ports) + if (xhci->usb2_rhub.num_ports + xhci->usb3_rhub.num_ports == + num_ports) break; offset = xhci_find_next_ext_cap(base, offset, XHCI_EXT_CAPS_PROTOCOL); } - - if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) { + if (xhci->usb2_rhub.num_ports == 0 && xhci->usb3_rhub.num_ports == 0) { xhci_warn(xhci, "No ports on the roothubs?\n"); return -ENODEV; } xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "Found %u USB 2.0 ports and %u USB 3.0 ports.", - xhci->num_usb2_ports, xhci->num_usb3_ports); + "Found %u USB 2.0 ports and %u USB 3.0 ports.", + xhci->usb2_rhub.num_ports, xhci->usb3_rhub.num_ports); /* Place limits on the number of roothub ports so that the hub * descriptors aren't longer than the USB core will allocate. */ - if (xhci->num_usb3_ports > USB_SS_MAXPORTS) { + if (xhci->usb3_rhub.num_ports > USB_SS_MAXPORTS) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Limiting USB 3.0 roothub ports to %u.", USB_SS_MAXPORTS); - xhci->num_usb3_ports = USB_SS_MAXPORTS; + xhci->usb3_rhub.num_ports = USB_SS_MAXPORTS; } - if (xhci->num_usb2_ports > USB_MAXCHILDREN) { + if (xhci->usb2_rhub.num_ports > USB_MAXCHILDREN) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Limiting USB 2.0 roothub ports to %u.", USB_MAXCHILDREN); - xhci->num_usb2_ports = USB_MAXCHILDREN; + xhci->usb2_rhub.num_ports = USB_MAXCHILDREN; } /* * Note we could have all USB 3.0 ports, or all USB 2.0 ports. * Not sure how the USB core will handle a hub with no ports... */ - if (xhci->num_usb2_ports) { - xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)* - xhci->num_usb2_ports, flags); - if (!xhci->usb2_ports) - return -ENOMEM; - - port_index = 0; - for (i = 0; i < num_ports; i++) { - if (xhci->port_array[i] == 0x03 || - xhci->port_array[i] == 0 || - xhci->port_array[i] == DUPLICATE_ENTRY) - continue; - xhci->usb2_ports[port_index] = - &xhci->op_regs->port_status_base + - NUM_PORT_REGS*i; - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "USB 2.0 port at index %u, " - "addr = %p", i, - xhci->usb2_ports[port_index]); - port_index++; - if (port_index == xhci->num_usb2_ports) - break; - } - } - if (xhci->num_usb3_ports) { - xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)* - xhci->num_usb3_ports, flags); - if (!xhci->usb3_ports) - return -ENOMEM; + xhci_create_rhub_port_array(xhci, &xhci->usb2_rhub, flags); + xhci_create_rhub_port_array(xhci, &xhci->usb3_rhub, flags); - port_index = 0; - for (i = 0; i < num_ports; i++) - if (xhci->port_array[i] == 0x03) { - xhci->usb3_ports[port_index] = - &xhci->op_regs->port_status_base + - NUM_PORT_REGS*i; - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "USB 3.0 port at index %u, " - "addr = %p", i, - xhci->usb3_ports[port_index]); - port_index++; - if (port_index == xhci->num_usb3_ports) - break; - } - } return 0; } diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index eea7360a18fc..fa33d6e5b1cb 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -58,7 +58,7 @@ static int get_bw_index(struct xhci_hcd *xhci, struct usb_device *udev, bw_index = (virt_dev->real_port - 1) * 2 + 1; } else { /* add one more for each SS port */ - bw_index = virt_dev->real_port + xhci->num_usb3_ports - 1; + bw_index = virt_dev->real_port + xhci->usb3_rhub.num_ports - 1; } return bw_index; @@ -284,7 +284,7 @@ int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk) int i; /* ss IN and OUT are separated */ - num_usb_bus = xhci->num_usb3_ports * 2 + xhci->num_usb2_ports; + num_usb_bus = xhci->usb3_rhub.num_ports * 2 + xhci->usb2_rhub.num_ports; sch_array = kcalloc(num_usb_bus, sizeof(*sch_array), GFP_KERNEL); if (sch_array == NULL) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 85ffda85f8ab..6372edf339d9 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -196,11 +196,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_BROKEN_STREAMS; } if (pdev->vendor == PCI_VENDOR_ID_RENESAS && - pdev->device == 0x0014) + pdev->device == 0x0014) { xhci->quirks |= XHCI_TRUST_TX_LENGTH; + xhci->quirks |= XHCI_ZERO_64B_REGS; + } if (pdev->vendor == PCI_VENDOR_ID_RENESAS && - pdev->device == 0x0015) + pdev->device == 0x0015) { xhci->quirks |= XHCI_RESET_ON_RESUME; + xhci->quirks |= XHCI_ZERO_64B_REGS; + } if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; @@ -284,13 +288,6 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) driver = (struct hc_driver *)id->driver_data; - /* For some HW implementation, a XHCI reset is just not enough... */ - if (usb_xhci_needs_pci_reset(dev)) { - dev_info(&dev->dev, "Resetting\n"); - if (pci_reset_function_locked(dev)) - dev_warn(&dev->dev, "Reset failed"); - } - /* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume(&dev->dev); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 91a1a824673d..f0a99aa0ac58 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1497,44 +1497,6 @@ static void handle_vendor_event(struct xhci_hcd *xhci, handle_cmd_completion(xhci, &event->event_cmd); } -/* @port_id: the one-based port ID from the hardware (indexed from array of all - * port registers -- USB 3.0 and USB 2.0). - * - * Returns a zero-based port number, which is suitable for indexing into each of - * the split roothubs' port arrays and bus state arrays. - * Add one to it in order to call xhci_find_slot_id_by_port. - */ -static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, - struct xhci_hcd *xhci, u32 port_id) -{ - unsigned int i; - unsigned int num_similar_speed_ports = 0; - - /* port_id from the hardware is 1-based, but port_array[], usb3_ports[], - * and usb2_ports are 0-based indexes. Count the number of similar - * speed ports, up to 1 port before this port. - */ - for (i = 0; i < (port_id - 1); i++) { - u8 port_speed = xhci->port_array[i]; - - /* - * Skip ports that don't have known speeds, or have duplicate - * Extended Capabilities port speed entries. - */ - if (port_speed == 0 || port_speed == DUPLICATE_ENTRY) - continue; - - /* - * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and - * 1.1 ports are under the USB 2.0 hub. If the port speed - * matches the device speed, it's a similar speed port. - */ - if ((port_speed == 0x03) == (hcd->speed >= HCD_USB3)) - num_similar_speed_ports++; - } - return num_similar_speed_ports; -} - static void handle_device_notification(struct xhci_hcd *xhci, union xhci_trb *event) { @@ -1563,11 +1525,10 @@ static void handle_port_status(struct xhci_hcd *xhci, u32 portsc, cmd_reg; int max_ports; int slot_id; - unsigned int faked_port_index; - u8 major_revision; + unsigned int hcd_portnum; struct xhci_bus_state *bus_state; - __le32 __iomem **port_array; bool bogus_port_status = false; + struct xhci_port *port; /* Port status change events always have a successful completion code */ if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS) @@ -1584,49 +1545,19 @@ static void handle_port_status(struct xhci_hcd *xhci, return; } - /* Figure out which usb_hcd this port is attached to: - * is it a USB 3.0 port or a USB 2.0/1.1 port? - */ - major_revision = xhci->port_array[port_id - 1]; - - /* Find the right roothub. */ - hcd = xhci_to_hcd(xhci); - if ((major_revision == 0x03) != (hcd->speed >= HCD_USB3)) - hcd = xhci->shared_hcd; - - if (major_revision == 0) { - xhci_warn(xhci, "Event for port %u not in " - "Extended Capabilities, ignoring.\n", - port_id); - bogus_port_status = true; - goto cleanup; - } - if (major_revision == DUPLICATE_ENTRY) { - xhci_warn(xhci, "Event for port %u duplicated in" - "Extended Capabilities, ignoring.\n", - port_id); + port = &xhci->hw_ports[port_id - 1]; + if (!port || !port->rhub || port->hcd_portnum == DUPLICATE_ENTRY) { + xhci_warn(xhci, "Event for invalid port %u\n", port_id); bogus_port_status = true; goto cleanup; } - /* - * Hardware port IDs reported by a Port Status Change Event include USB - * 3.0 and USB 2.0 ports. We want to check if the port has reported a - * resume event, but we first need to translate the hardware port ID - * into the index into the ports on the correct split roothub, and the - * correct bus_state structure. - */ + hcd = port->rhub->hcd; bus_state = &xhci->bus_state[hcd_index(hcd)]; - if (hcd->speed >= HCD_USB3) - port_array = xhci->usb3_ports; - else - port_array = xhci->usb2_ports; - /* Find the faked port hub number */ - faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci, - port_id); - portsc = readl(port_array[faked_port_index]); + hcd_portnum = port->hcd_portnum; + portsc = readl(port->addr); - trace_xhci_handle_port_status(faked_port_index, portsc); + trace_xhci_handle_port_status(hcd_portnum, portsc); if (hcd->state == HC_STATE_SUSPENDED) { xhci_dbg(xhci, "resume root hub\n"); @@ -1634,7 +1565,7 @@ static void handle_port_status(struct xhci_hcd *xhci, } if (hcd->speed >= HCD_USB3 && (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) - bus_state->port_remote_wakeup &= ~(1 << faked_port_index); + bus_state->port_remote_wakeup &= ~(1 << hcd_portnum); if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) { xhci_dbg(xhci, "port resume event for port %d\n", port_id); @@ -1651,29 +1582,26 @@ static void handle_port_status(struct xhci_hcd *xhci, * so we can tell the difference between the end of * device and host initiated resume. */ - bus_state->port_remote_wakeup |= 1 << faked_port_index; - xhci_test_and_clear_bit(xhci, port_array, - faked_port_index, PORT_PLC); - xhci_set_link_state(xhci, port_array, faked_port_index, - XDEV_U0); + bus_state->port_remote_wakeup |= 1 << hcd_portnum; + xhci_test_and_clear_bit(xhci, port, PORT_PLC); + xhci_set_link_state(xhci, port, XDEV_U0); /* Need to wait until the next link state change * indicates the device is actually in U0. */ bogus_port_status = true; goto cleanup; - } else if (!test_bit(faked_port_index, - &bus_state->resuming_ports)) { + } else if (!test_bit(hcd_portnum, &bus_state->resuming_ports)) { xhci_dbg(xhci, "resume HS port %d\n", port_id); - bus_state->resume_done[faked_port_index] = jiffies + + bus_state->resume_done[hcd_portnum] = jiffies + msecs_to_jiffies(USB_RESUME_TIMEOUT); - set_bit(faked_port_index, &bus_state->resuming_ports); + set_bit(hcd_portnum, &bus_state->resuming_ports); /* Do the rest in GetPortStatus after resume time delay. * Avoid polling roothub status before that so that a * usb device auto-resume latency around ~40ms. */ set_bit(HCD_FLAG_POLL_RH, &hcd->flags); mod_timer(&hcd->rh_timer, - bus_state->resume_done[faked_port_index]); + bus_state->resume_done[hcd_portnum]); bogus_port_status = true; } } @@ -1688,17 +1616,14 @@ static void handle_port_status(struct xhci_hcd *xhci, * so the roothub behavior is consistent with external * USB 3.0 hub behavior. */ - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - faked_port_index + 1); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1); if (slot_id && xhci->devs[slot_id]) xhci_ring_device(xhci, slot_id); - if (bus_state->port_remote_wakeup & (1 << faked_port_index)) { - bus_state->port_remote_wakeup &= - ~(1 << faked_port_index); - xhci_test_and_clear_bit(xhci, port_array, - faked_port_index, PORT_PLC); + if (bus_state->port_remote_wakeup & (1 << hcd_portnum)) { + bus_state->port_remote_wakeup &= ~(1 << hcd_portnum); + xhci_test_and_clear_bit(xhci, port, PORT_PLC); usb_wakeup_notification(hcd->self.root_hub, - faked_port_index + 1); + hcd_portnum + 1); bogus_port_status = true; goto cleanup; } @@ -1710,16 +1635,15 @@ static void handle_port_status(struct xhci_hcd *xhci, * out of the RExit state. */ if (!DEV_SUPERSPEED_ANY(portsc) && - test_and_clear_bit(faked_port_index, + test_and_clear_bit(hcd_portnum, &bus_state->rexit_ports)) { - complete(&bus_state->rexit_done[faked_port_index]); + complete(&bus_state->rexit_done[hcd_portnum]); bogus_port_status = true; goto cleanup; } if (hcd->speed < HCD_USB3) - xhci_test_and_clear_bit(xhci, port_array, faked_port_index, - PORT_PLC); + xhci_test_and_clear_bit(xhci, port, PORT_PLC); cleanup: /* Update event ring dequeue pointer before dropping the lock */ diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 2c076ea80522..a8c1d073cba0 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -18,9 +18,11 @@ #include <linux/phy/tegra/xusb.h> #include <linux/platform_device.h> #include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> #include <linux/reset.h> #include <linux/slab.h> +#include <soc/tegra/pmc.h> #include "xhci.h" @@ -761,6 +763,49 @@ static void tegra_xusb_phy_disable(struct tegra_xusb *tegra) } } +static int tegra_xusb_runtime_suspend(struct device *dev) +{ + struct tegra_xusb *tegra = dev_get_drvdata(dev); + + tegra_xusb_phy_disable(tegra); + regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies); + tegra_xusb_clk_disable(tegra); + + return 0; +} + +static int tegra_xusb_runtime_resume(struct device *dev) +{ + struct tegra_xusb *tegra = dev_get_drvdata(dev); + int err; + + err = tegra_xusb_clk_enable(tegra); + if (err) { + dev_err(dev, "failed to enable clocks: %d\n", err); + return err; + } + + err = regulator_bulk_enable(tegra->soc->num_supplies, tegra->supplies); + if (err) { + dev_err(dev, "failed to enable regulators: %d\n", err); + goto disable_clk; + } + + err = tegra_xusb_phy_enable(tegra); + if (err < 0) { + dev_err(dev, "failed to enable PHYs: %d\n", err); + goto disable_regulator; + } + + return 0; + +disable_regulator: + regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies); +disable_clk: + tegra_xusb_clk_disable(tegra); + return err; +} + static int tegra_xusb_load_firmware(struct tegra_xusb *tegra) { unsigned int code_tag_blocks, code_size_blocks, code_blocks; @@ -930,20 +975,6 @@ static int tegra_xusb_probe(struct platform_device *pdev) if (IS_ERR(tegra->padctl)) return PTR_ERR(tegra->padctl); - tegra->host_rst = devm_reset_control_get(&pdev->dev, "xusb_host"); - if (IS_ERR(tegra->host_rst)) { - err = PTR_ERR(tegra->host_rst); - dev_err(&pdev->dev, "failed to get xusb_host reset: %d\n", err); - goto put_padctl; - } - - tegra->ss_rst = devm_reset_control_get(&pdev->dev, "xusb_ss"); - if (IS_ERR(tegra->ss_rst)) { - err = PTR_ERR(tegra->ss_rst); - dev_err(&pdev->dev, "failed to get xusb_ss reset: %d\n", err); - goto put_padctl; - } - tegra->host_clk = devm_clk_get(&pdev->dev, "xusb_host"); if (IS_ERR(tegra->host_clk)) { err = PTR_ERR(tegra->host_clk); @@ -1007,11 +1038,48 @@ static int tegra_xusb_probe(struct platform_device *pdev) goto put_padctl; } + if (!pdev->dev.pm_domain) { + tegra->host_rst = devm_reset_control_get(&pdev->dev, + "xusb_host"); + if (IS_ERR(tegra->host_rst)) { + err = PTR_ERR(tegra->host_rst); + dev_err(&pdev->dev, + "failed to get xusb_host reset: %d\n", err); + goto put_padctl; + } + + tegra->ss_rst = devm_reset_control_get(&pdev->dev, "xusb_ss"); + if (IS_ERR(tegra->ss_rst)) { + err = PTR_ERR(tegra->ss_rst); + dev_err(&pdev->dev, "failed to get xusb_ss reset: %d\n", + err); + goto put_padctl; + } + + err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_XUSBA, + tegra->ss_clk, + tegra->ss_rst); + if (err) { + dev_err(&pdev->dev, + "failed to enable XUSBA domain: %d\n", err); + goto put_padctl; + } + + err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_XUSBC, + tegra->host_clk, + tegra->host_rst); + if (err) { + dev_err(&pdev->dev, + "failed to enable XUSBC domain: %d\n", err); + goto disable_xusba; + } + } + tegra->supplies = devm_kcalloc(&pdev->dev, tegra->soc->num_supplies, sizeof(*tegra->supplies), GFP_KERNEL); if (!tegra->supplies) { err = -ENOMEM; - goto put_padctl; + goto disable_xusbc; } for (i = 0; i < tegra->soc->num_supplies; i++) @@ -1021,7 +1089,7 @@ static int tegra_xusb_probe(struct platform_device *pdev) tegra->supplies); if (err) { dev_err(&pdev->dev, "failed to get regulators: %d\n", err); - goto put_padctl; + goto disable_xusbc; } for (i = 0; i < tegra->soc->num_types; i++) @@ -1031,7 +1099,7 @@ static int tegra_xusb_probe(struct platform_device *pdev) sizeof(*tegra->phys), GFP_KERNEL); if (!tegra->phys) { err = -ENOMEM; - goto put_padctl; + goto disable_xusbc; } for (i = 0, k = 0; i < tegra->soc->num_types; i++) { @@ -1047,29 +1115,35 @@ static int tegra_xusb_probe(struct platform_device *pdev) "failed to get PHY %s: %ld\n", prop, PTR_ERR(phy)); err = PTR_ERR(phy); - goto put_padctl; + goto disable_xusbc; } tegra->phys[k++] = phy; } } - err = tegra_xusb_clk_enable(tegra); - if (err) { - dev_err(&pdev->dev, "failed to enable clocks: %d\n", err); - goto put_padctl; + tegra->hcd = usb_create_hcd(&tegra_xhci_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!tegra->hcd) { + err = -ENOMEM; + goto disable_xusbc; } - err = regulator_bulk_enable(tegra->soc->num_supplies, tegra->supplies); - if (err) { - dev_err(&pdev->dev, "failed to enable regulators: %d\n", err); - goto disable_clk; - } + /* + * This must happen after usb_create_hcd(), because usb_create_hcd() + * will overwrite the drvdata of the device with the hcd it creates. + */ + platform_set_drvdata(pdev, tegra); + + pm_runtime_enable(&pdev->dev); + if (pm_runtime_enabled(&pdev->dev)) + err = pm_runtime_get_sync(&pdev->dev); + else + err = tegra_xusb_runtime_resume(&pdev->dev); - err = tegra_xusb_phy_enable(tegra); if (err < 0) { - dev_err(&pdev->dev, "failed to enable PHYs: %d\n", err); - goto disable_regulator; + dev_err(&pdev->dev, "failed to enable device: %d\n", err); + goto disable_rpm; } tegra_xusb_ipfs_config(tegra, regs); @@ -1077,22 +1151,9 @@ static int tegra_xusb_probe(struct platform_device *pdev) err = tegra_xusb_load_firmware(tegra); if (err < 0) { dev_err(&pdev->dev, "failed to load firmware: %d\n", err); - goto disable_phy; - } - - tegra->hcd = usb_create_hcd(&tegra_xhci_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!tegra->hcd) { - err = -ENOMEM; - goto disable_phy; + goto put_rpm; } - /* - * This must happen after usb_create_hcd(), because usb_create_hcd() - * will overwrite the drvdata of the device with the hcd it creates. - */ - platform_set_drvdata(pdev, tegra); - tegra->hcd->regs = tegra->regs; tegra->hcd->rsrc_start = regs->start; tegra->hcd->rsrc_len = resource_size(regs); @@ -1100,7 +1161,7 @@ static int tegra_xusb_probe(struct platform_device *pdev) err = usb_add_hcd(tegra->hcd, tegra->xhci_irq, IRQF_SHARED); if (err < 0) { dev_err(&pdev->dev, "failed to add USB HCD: %d\n", err); - goto put_usb2; + goto put_rpm; } device_wakeup_enable(tegra->hcd->self.controller); @@ -1155,14 +1216,18 @@ put_usb3: usb_put_hcd(xhci->shared_hcd); remove_usb2: usb_remove_hcd(tegra->hcd); -put_usb2: +put_rpm: + if (!pm_runtime_status_suspended(&pdev->dev)) + tegra_xusb_runtime_suspend(&pdev->dev); +disable_rpm: + pm_runtime_disable(&pdev->dev); usb_put_hcd(tegra->hcd); -disable_phy: - tegra_xusb_phy_disable(tegra); -disable_regulator: - regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies); -disable_clk: - tegra_xusb_clk_disable(tegra); +disable_xusbc: + if (!&pdev->dev.pm_domain) + tegra_powergate_power_off(TEGRA_POWERGATE_XUSBC); +disable_xusba: + if (!&pdev->dev.pm_domain) + tegra_powergate_power_off(TEGRA_POWERGATE_XUSBA); put_padctl: tegra_xusb_padctl_put(tegra->padctl); return err; @@ -1181,9 +1246,8 @@ static int tegra_xusb_remove(struct platform_device *pdev) dma_free_coherent(&pdev->dev, tegra->fw.size, tegra->fw.virt, tegra->fw.phys); - tegra_xusb_phy_disable(tegra); - regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies); - tegra_xusb_clk_disable(tegra); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); tegra_xusb_padctl_put(tegra->padctl); @@ -1211,6 +1275,8 @@ static int tegra_xusb_resume(struct device *dev) #endif static const struct dev_pm_ops tegra_xusb_pm_ops = { + SET_RUNTIME_PM_OPS(tegra_xusb_runtime_suspend, + tegra_xusb_runtime_resume, NULL) SET_SYSTEM_SLEEP_PM_OPS(tegra_xusb_suspend, tegra_xusb_resume) }; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 711da3306b14..8c8da2d657fa 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -33,8 +33,8 @@ static int link_quirk; module_param(link_quirk, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); -static unsigned int quirks; -module_param(quirks, uint, S_IRUGO); +static unsigned long long quirks; +module_param(quirks, ullong, S_IRUGO); MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default"); /* TODO: copied from ehci-hcd.c - can this be refactored? */ @@ -209,6 +209,68 @@ int xhci_reset(struct xhci_hcd *xhci) return ret; } +static void xhci_zero_64b_regs(struct xhci_hcd *xhci) +{ + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; + int err, i; + u64 val; + + /* + * Some Renesas controllers get into a weird state if they are + * reset while programmed with 64bit addresses (they will preserve + * the top half of the address in internal, non visible + * registers). You end up with half the address coming from the + * kernel, and the other half coming from the firmware. Also, + * changing the programming leads to extra accesses even if the + * controller is supposed to be halted. The controller ends up with + * a fatal fault, and is then ripe for being properly reset. + * + * Special care is taken to only apply this if the device is behind + * an iommu. Doing anything when there is no iommu is definitely + * unsafe... + */ + if (!(xhci->quirks & XHCI_ZERO_64B_REGS) || !dev->iommu_group) + return; + + xhci_info(xhci, "Zeroing 64bit base registers, expecting fault\n"); + + /* Clear HSEIE so that faults do not get signaled */ + val = readl(&xhci->op_regs->command); + val &= ~CMD_HSEIE; + writel(val, &xhci->op_regs->command); + + /* Clear HSE (aka FATAL) */ + val = readl(&xhci->op_regs->status); + val |= STS_FATAL; + writel(val, &xhci->op_regs->status); + + /* Now zero the registers, and brace for impact */ + val = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); + if (upper_32_bits(val)) + xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr); + val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + if (upper_32_bits(val)) + xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring); + + for (i = 0; i < HCS_MAX_INTRS(xhci->hcs_params1); i++) { + struct xhci_intr_reg __iomem *ir; + + ir = &xhci->run_regs->ir_set[i]; + val = xhci_read_64(xhci, &ir->erst_base); + if (upper_32_bits(val)) + xhci_write_64(xhci, 0, &ir->erst_base); + val= xhci_read_64(xhci, &ir->erst_dequeue); + if (upper_32_bits(val)) + xhci_write_64(xhci, 0, &ir->erst_dequeue); + } + + /* Wait for the fault to appear. It will be cleared on reset */ + err = xhci_handshake(&xhci->op_regs->status, + STS_FATAL, STS_FATAL, + XHCI_MAX_HALT_USEC); + if (!err) + xhci_info(xhci, "Fault detected\n"); +} #ifdef CONFIG_USB_PCI /* @@ -400,13 +462,15 @@ static void compliance_mode_recovery(struct timer_list *t) { struct xhci_hcd *xhci; struct usb_hcd *hcd; + struct xhci_hub *rhub; u32 temp; int i; xhci = from_timer(xhci, t, comp_mode_recovery_timer); + rhub = &xhci->usb3_rhub; - for (i = 0; i < xhci->num_usb3_ports; i++) { - temp = readl(xhci->usb3_ports[i]); + for (i = 0; i < rhub->num_ports; i++) { + temp = readl(rhub->ports[i]->addr); if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) { /* * Compliance Mode Detected. Letting USB Core @@ -426,7 +490,7 @@ static void compliance_mode_recovery(struct timer_list *t) } } - if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1)) + if (xhci->port_status_u0 != ((1 << rhub->num_ports) - 1)) mod_timer(&xhci->comp_mode_recovery_timer, jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); } @@ -483,7 +547,7 @@ static bool xhci_compliance_mode_recovery_timer_quirk_check(void) static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci) { - return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1)); + return (xhci->port_status_u0 == ((1 << xhci->usb3_rhub.num_ports) - 1)); } @@ -812,33 +876,33 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci) { + struct xhci_port **ports; int port_index; - __le32 __iomem **port_array; unsigned long flags; u32 t1, t2; spin_lock_irqsave(&xhci->lock, flags); /* disable usb3 ports Wake bits */ - port_index = xhci->num_usb3_ports; - port_array = xhci->usb3_ports; + port_index = xhci->usb3_rhub.num_ports; + ports = xhci->usb3_rhub.ports; while (port_index--) { - t1 = readl(port_array[port_index]); + t1 = readl(ports[port_index]->addr); t1 = xhci_port_state_to_neutral(t1); t2 = t1 & ~PORT_WAKE_BITS; if (t1 != t2) - writel(t2, port_array[port_index]); + writel(t2, ports[port_index]->addr); } /* disable usb2 ports Wake bits */ - port_index = xhci->num_usb2_ports; - port_array = xhci->usb2_ports; + port_index = xhci->usb2_rhub.num_ports; + ports = xhci->usb2_rhub.ports; while (port_index--) { - t1 = readl(port_array[port_index]); + t1 = readl(ports[port_index]->addr); t1 = xhci_port_state_to_neutral(t1); t2 = t1 & ~PORT_WAKE_BITS; if (t1 != t2) - writel(t2, port_array[port_index]); + writel(t2, ports[port_index]->addr); } spin_unlock_irqrestore(&xhci->lock, flags); @@ -1004,6 +1068,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) xhci_dbg(xhci, "Stop HCD\n"); xhci_halt(xhci); + xhci_zero_64b_regs(xhci); xhci_reset(xhci); spin_unlock_irq(&xhci->lock); xhci_cleanup_msix(xhci); @@ -3976,18 +4041,10 @@ static int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev) */ int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - __le32 __iomem *base_addr = &xhci->op_regs->port_status_base; - __le32 __iomem *addr; - int raw_port; + struct xhci_hub *rhub; - if (hcd->speed < HCD_USB3) - addr = xhci->usb2_ports[port1 - 1]; - else - addr = xhci->usb3_ports[port1 - 1]; - - raw_port = (addr - base_addr)/NUM_PORT_REGS + 1; - return raw_port; + rhub = xhci_get_rhub(hcd); + return rhub->ports[port1 - 1]->hw_portnum + 1; } /* @@ -4120,7 +4177,7 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, struct usb_device *udev, int enable) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - __le32 __iomem **port_array; + struct xhci_port **ports; __le32 __iomem *pm_addr, *hlpm_addr; u32 pm_val, hlpm_val, field; unsigned int port_num; @@ -4141,11 +4198,11 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, spin_lock_irqsave(&xhci->lock, flags); - port_array = xhci->usb2_ports; + ports = xhci->usb2_rhub.ports; port_num = udev->portnum - 1; - pm_addr = port_array[port_num] + PORTPMSC; + pm_addr = ports[port_num]->addr + PORTPMSC; pm_val = readl(pm_addr); - hlpm_addr = port_array[port_num] + PORTHLPMC; + hlpm_addr = ports[port_num]->addr + PORTHLPMC; field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", @@ -4858,6 +4915,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) if (usb_hcd_is_primary_hcd(hcd)) { xhci->main_hcd = hcd; + xhci->usb2_rhub.hcd = hcd; /* Mark the first roothub as being USB 2.0. * The xHCI driver will register the USB 3.0 roothub. */ @@ -4883,6 +4941,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) minor_rev, minor_rev ? "Enhanced" : ""); + xhci->usb3_rhub.hcd = hcd; /* xHCI private pointer was set in xhci_pci_probe for the second * registered roothub. */ @@ -4921,6 +4980,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) if (retval) return retval; + xhci_zero_64b_regs(xhci); + xhci_dbg(xhci, "Resetting HCD\n"); /* Reset the internal HC memory state and registers. */ retval = xhci_reset(xhci); @@ -4963,7 +5024,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) return retval; xhci_dbg(xhci, "Called HCD init\n"); - xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%08x\n", + xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%016llx\n", xhci->hcc_params, xhci->hci_version, xhci->quirks); return 0; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 6dfc4867dbcf..939e2f86b595 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1683,13 +1683,23 @@ static inline unsigned int hcd_index(struct usb_hcd *hcd) else return 1; } +struct xhci_port { + __le32 __iomem *addr; + int hw_portnum; + int hcd_portnum; + struct xhci_hub *rhub; +}; struct xhci_hub { - u8 maj_rev; - u8 min_rev; - u32 *psi; /* array of protocol speed ID entries */ - u8 psi_count; - u8 psi_uid_count; + struct xhci_port **ports; + unsigned int num_ports; + struct usb_hcd *hcd; + /* supported prococol extended capabiliy values */ + u8 maj_rev; + u8 min_rev; + u32 *psi; /* array of protocol speed ID entries */ + u8 psi_count; + u8 psi_uid_count; }; /* There is one xhci_hcd structure per controller */ @@ -1787,12 +1797,12 @@ struct xhci_hcd { #define XHCI_STATE_DYING (1 << 0) #define XHCI_STATE_HALTED (1 << 1) #define XHCI_STATE_REMOVING (1 << 2) - unsigned int quirks; -#define XHCI_LINK_TRB_QUIRK (1 << 0) -#define XHCI_RESET_EP_QUIRK (1 << 1) -#define XHCI_NEC_HOST (1 << 2) -#define XHCI_AMD_PLL_FIX (1 << 3) -#define XHCI_SPURIOUS_SUCCESS (1 << 4) + unsigned long long quirks; +#define XHCI_LINK_TRB_QUIRK BIT_ULL(0) +#define XHCI_RESET_EP_QUIRK BIT_ULL(1) +#define XHCI_NEC_HOST BIT_ULL(2) +#define XHCI_AMD_PLL_FIX BIT_ULL(3) +#define XHCI_SPURIOUS_SUCCESS BIT_ULL(4) /* * Certain Intel host controllers have a limit to the number of endpoint * contexts they can handle. Ideally, they would signal that they can't handle @@ -1802,50 +1812,44 @@ struct xhci_hcd { * commands, reset device commands, disable slot commands, and address device * commands. */ -#define XHCI_EP_LIMIT_QUIRK (1 << 5) -#define XHCI_BROKEN_MSI (1 << 6) -#define XHCI_RESET_ON_RESUME (1 << 7) -#define XHCI_SW_BW_CHECKING (1 << 8) -#define XHCI_AMD_0x96_HOST (1 << 9) -#define XHCI_TRUST_TX_LENGTH (1 << 10) -#define XHCI_LPM_SUPPORT (1 << 11) -#define XHCI_INTEL_HOST (1 << 12) -#define XHCI_SPURIOUS_REBOOT (1 << 13) -#define XHCI_COMP_MODE_QUIRK (1 << 14) -#define XHCI_AVOID_BEI (1 << 15) -#define XHCI_PLAT (1 << 16) -#define XHCI_SLOW_SUSPEND (1 << 17) -#define XHCI_SPURIOUS_WAKEUP (1 << 18) +#define XHCI_EP_LIMIT_QUIRK BIT_ULL(5) +#define XHCI_BROKEN_MSI BIT_ULL(6) +#define XHCI_RESET_ON_RESUME BIT_ULL(7) +#define XHCI_SW_BW_CHECKING BIT_ULL(8) +#define XHCI_AMD_0x96_HOST BIT_ULL(9) +#define XHCI_TRUST_TX_LENGTH BIT_ULL(10) +#define XHCI_LPM_SUPPORT BIT_ULL(11) +#define XHCI_INTEL_HOST BIT_ULL(12) +#define XHCI_SPURIOUS_REBOOT BIT_ULL(13) +#define XHCI_COMP_MODE_QUIRK BIT_ULL(14) +#define XHCI_AVOID_BEI BIT_ULL(15) +#define XHCI_PLAT BIT_ULL(16) +#define XHCI_SLOW_SUSPEND BIT_ULL(17) +#define XHCI_SPURIOUS_WAKEUP BIT_ULL(18) /* For controllers with a broken beyond repair streams implementation */ -#define XHCI_BROKEN_STREAMS (1 << 19) -#define XHCI_PME_STUCK_QUIRK (1 << 20) -#define XHCI_MTK_HOST (1 << 21) -#define XHCI_SSIC_PORT_UNUSED (1 << 22) -#define XHCI_NO_64BIT_SUPPORT (1 << 23) -#define XHCI_MISSING_CAS (1 << 24) +#define XHCI_BROKEN_STREAMS BIT_ULL(19) +#define XHCI_PME_STUCK_QUIRK BIT_ULL(20) +#define XHCI_MTK_HOST BIT_ULL(21) +#define XHCI_SSIC_PORT_UNUSED BIT_ULL(22) +#define XHCI_NO_64BIT_SUPPORT BIT_ULL(23) +#define XHCI_MISSING_CAS BIT_ULL(24) /* For controller with a broken Port Disable implementation */ -#define XHCI_BROKEN_PORT_PED (1 << 25) -#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26) -#define XHCI_U2_DISABLE_WAKE (1 << 27) -#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28) -#define XHCI_HW_LPM_DISABLE (1 << 29) -#define XHCI_SUSPEND_DELAY (1 << 30) -#define XHCI_INTEL_USB_ROLE_SW (1 << 31) +#define XHCI_BROKEN_PORT_PED BIT_ULL(25) +#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 BIT_ULL(26) +#define XHCI_U2_DISABLE_WAKE BIT_ULL(27) +#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL BIT_ULL(28) +#define XHCI_HW_LPM_DISABLE BIT_ULL(29) +#define XHCI_SUSPEND_DELAY BIT_ULL(30) +#define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31) +#define XHCI_ZERO_64B_REGS BIT_ULL(32) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ struct xhci_bus_state bus_state[2]; - /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ - u8 *port_array; - /* Array of pointers to USB 3.0 PORTSC registers */ - __le32 __iomem **usb3_ports; - unsigned int num_usb3_ports; - /* Array of pointers to USB 2.0 PORTSC registers */ - __le32 __iomem **usb2_ports; + struct xhci_port *hw_ports; struct xhci_hub usb2_rhub; struct xhci_hub usb3_rhub; - unsigned int num_usb2_ports; /* support xHCI 0.96 spec USB2 software LPM */ unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ @@ -2091,14 +2095,16 @@ void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring); unsigned int count_trbs(u64 addr, u64 len); /* xHCI roothub code */ -void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, - int port_id, u32 link_state); -void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, - int port_id, u32 port_bit); +void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port, + u32 link_state); +void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port, + u32 port_bit); int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength); int xhci_hub_status_data(struct usb_hcd *hcd, char *buf); int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1); +struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd); + void xhci_hc_died(struct xhci_hcd *xhci); #ifdef CONFIG_PM diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c index 05d22589b5cc..55b94fd10331 100644 --- a/drivers/usb/isp1760/isp1760-core.c +++ b/drivers/usb/isp1760/isp1760-core.c @@ -31,7 +31,7 @@ static void isp1760_init_core(struct isp1760_device *isp) /* Low-level chip reset */ if (isp->rst_gpio) { gpiod_set_value_cansleep(isp->rst_gpio, 1); - mdelay(50); + msleep(50); gpiod_set_value_cansleep(isp->rst_gpio, 0); } diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c index 42672d6ec525..1045521be293 100644 --- a/drivers/usb/isp1760/isp1760-hcd.c +++ b/drivers/usb/isp1760/isp1760-hcd.c @@ -2093,7 +2093,7 @@ static void isp1760_stop(struct usb_hcd *hcd) isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1, NULL, 0); - mdelay(20); + msleep(20); spin_lock_irq(&priv->lock); ehci_reset(hcd); diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 3e65bdc2615c..f92c5df26320 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2107,7 +2107,7 @@ static void sisusb_get_ramconfig(struct sisusb_usb_data *sisusb) bw = busSDR[(tmp8 & 0x03)]; break; case 2: - ramtypetext1 = "asymmeric"; + ramtypetext1 = "asymmetric"; sisusb->vramsize += sisusb->vramsize/2; bw = busDDRA[(tmp8 & 0x03)]; break; diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 2761fad66b95..34e866ad4a81 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -1227,7 +1227,7 @@ static void mon_bin_vma_close(struct vm_area_struct *vma) /* * Map ring pages to user space. */ -static int mon_bin_vma_fault(struct vm_fault *vmf) +static vm_fault_t mon_bin_vma_fault(struct vm_fault *vmf) { struct mon_reader_bin *rp = vmf->vma->vm_private_data; unsigned long offset, chunk_idx; diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index 984f7e12a6a5..bc5ecd5ff565 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -700,7 +700,6 @@ static const struct file_operations mon_fops_text_u = { int mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus) { - struct dentry *d; enum { NAMESZ = 10 }; char name[NAMESZ]; int busnum = ubus? ubus->busnum: 0; @@ -713,42 +712,32 @@ int mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus) rc = snprintf(name, NAMESZ, "%dt", busnum); if (rc <= 0 || rc >= NAMESZ) goto err_print_t; - d = debugfs_create_file(name, 0600, mon_dir, mbus, + mbus->dent_t = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_text_t); - if (d == NULL) - goto err_create_t; - mbus->dent_t = d; } rc = snprintf(name, NAMESZ, "%du", busnum); if (rc <= 0 || rc >= NAMESZ) goto err_print_u; - d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_text_u); - if (d == NULL) - goto err_create_u; - mbus->dent_u = d; + mbus->dent_u = debugfs_create_file(name, 0600, mon_dir, mbus, + &mon_fops_text_u); rc = snprintf(name, NAMESZ, "%ds", busnum); if (rc <= 0 || rc >= NAMESZ) goto err_print_s; - d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_stat); - if (d == NULL) - goto err_create_s; - mbus->dent_s = d; + mbus->dent_s = debugfs_create_file(name, 0600, mon_dir, mbus, + &mon_fops_stat); return 1; -err_create_s: err_print_s: debugfs_remove(mbus->dent_u); mbus->dent_u = NULL; -err_create_u: err_print_u: if (ubus != NULL) { debugfs_remove(mbus->dent_t); mbus->dent_t = NULL; } -err_create_t: err_print_t: return 0; } @@ -756,8 +745,7 @@ err_print_t: void mon_text_del(struct mon_bus *mbus) { debugfs_remove(mbus->dent_u); - if (mbus->dent_t != NULL) - debugfs_remove(mbus->dent_t); + debugfs_remove(mbus->dent_t); debugfs_remove(mbus->dent_s); } @@ -775,18 +763,7 @@ static void mon_text_ctor(void *mem) int __init mon_text_init(void) { - struct dentry *mondir; - - mondir = debugfs_create_dir("usbmon", usb_debug_root); - if (IS_ERR(mondir)) { - /* debugfs not available, but we can use usbmon without it */ - return 0; - } - if (mondir == NULL) { - printk(KERN_NOTICE TAG ": unable to create usbmon directory\n"); - return -ENOMEM; - } - mon_dir = mondir; + mon_dir = debugfs_create_dir("usbmon", usb_debug_root); return 0; } diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig index 25cd61947bee..40bbf1f53337 100644 --- a/drivers/usb/mtu3/Kconfig +++ b/drivers/usb/mtu3/Kconfig @@ -2,7 +2,7 @@ config USB_MTU3 tristate "MediaTek USB3 Dual Role controller" - depends on EXTCON && (USB || USB_GADGET) && HAS_DMA + depends on USB || USB_GADGET depends on ARCH_MEDIATEK || COMPILE_TEST select USB_XHCI_MTK if USB_SUPPORT && USB_XHCI_HCD help @@ -40,6 +40,7 @@ config USB_MTU3_GADGET config USB_MTU3_DUAL_ROLE bool "Dual Role mode" depends on ((USB=y || USB=USB_MTU3) && (USB_GADGET=y || USB_GADGET=USB_MTU3)) + depends on (EXTCON=y || EXTCON=USB_MTU3) help This is the default mode of working of MTU3 controller where both host and gadget features are enabled. diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h index 2cd00a24afd9..87823ac0d120 100644 --- a/drivers/usb/mtu3/mtu3.h +++ b/drivers/usb/mtu3/mtu3.h @@ -196,10 +196,12 @@ struct mtu3_gpd_ring { * @vbus: vbus 5V used by host mode * @edev: external connector used to detect vbus and iddig changes * @vbus_nb: notifier for vbus detection -* @vbus_nb: notifier for iddig(idpin) detection -* @extcon_reg_dwork: delay work for extcon notifier register, waiting for -* xHCI driver initialization, it's necessary for system bootup -* as device. +* @vbus_work : work of vbus detection notifier, used to avoid sleep in +* notifier callback which is atomic context +* @vbus_event : event of vbus detecion notifier +* @id_nb : notifier for iddig(idpin) detection +* @id_work : work of iddig detection notifier +* @id_event : event of iddig detecion notifier * @is_u3_drd: whether port0 supports usb3.0 dual-role device or not * @manual_drd_enabled: it's true when supports dual-role device by debugfs * to switch host/device modes depending on user input. @@ -208,8 +210,11 @@ struct otg_switch_mtk { struct regulator *vbus; struct extcon_dev *edev; struct notifier_block vbus_nb; + struct work_struct vbus_work; + unsigned long vbus_event; struct notifier_block id_nb; - struct delayed_work extcon_reg_dwork; + struct work_struct id_work; + unsigned long id_event; bool is_u3_drd; bool manual_drd_enabled; }; diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c index b1b99a8f6a7a..eecfd0671362 100644 --- a/drivers/usb/mtu3/mtu3_core.c +++ b/drivers/usb/mtu3/mtu3_core.c @@ -176,7 +176,7 @@ static void mtu3_intr_enable(struct mtu3 *mtu) mtu3_writel(mbase, U3D_LV1IESR, value); /* Enable U2 common USB interrupts */ - value = SUSPEND_INTR | RESUME_INTR | RESET_INTR; + value = SUSPEND_INTR | RESUME_INTR | RESET_INTR | LPM_RESUME_INTR; mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value); if (mtu->is_u3_ip) { @@ -195,6 +195,16 @@ static void mtu3_intr_enable(struct mtu3 *mtu) mtu3_writel(mbase, U3D_DEV_LINK_INTR_ENABLE, SSUSB_DEV_SPEED_CHG_INTR); } +/* reset: u2 - data toggle, u3 - SeqN, flow control status etc */ +static void mtu3_ep_reset(struct mtu3_ep *mep) +{ + struct mtu3 *mtu = mep->mtu; + u32 rst_bit = EP_RST(mep->is_in, mep->epnum); + + mtu3_setbits(mtu->mac_base, U3D_EP_RST, rst_bit); + mtu3_clrbits(mtu->mac_base, U3D_EP_RST, rst_bit); +} + /* set/clear the stall and toggle bits for non-ep0 */ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set) { @@ -220,8 +230,7 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set) } if (!set) { - mtu3_setbits(mbase, U3D_EP_RST, EP_RST(mep->is_in, epnum)); - mtu3_clrbits(mbase, U3D_EP_RST, EP_RST(mep->is_in, epnum)); + mtu3_ep_reset(mep); mep->flags &= ~MTU3_EP_STALL; } else { mep->flags |= MTU3_EP_STALL; @@ -400,6 +409,7 @@ void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep) mtu3_setbits(mbase, U3D_QIECR0, QMU_RX_DONE_INT(epnum)); } + mtu3_ep_reset(mep); ep_fifo_free(mep); dev_dbg(mtu->dev, "%s: %s\n", __func__, mep->name); @@ -658,8 +668,10 @@ static irqreturn_t mtu3_u3_ltssm_isr(struct mtu3 *mtu) if (ltssm & (HOT_RST_INTR | WARM_RST_INTR)) mtu3_gadget_reset(mtu); - if (ltssm & VBUS_FALL_INTR) + if (ltssm & VBUS_FALL_INTR) { mtu3_ss_func_set(mtu, false); + mtu3_gadget_reset(mtu); + } if (ltssm & VBUS_RISE_INTR) mtu3_ss_func_set(mtu, true); @@ -692,6 +704,12 @@ static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu) if (u2comm & RESET_INTR) mtu3_gadget_reset(mtu); + if (u2comm & LPM_RESUME_INTR) { + if (!(mtu3_readl(mbase, U3D_POWER_MANAGEMENT) & LPM_HRWE)) + mtu3_setbits(mbase, U3D_USB20_MISC_CONTROL, + LPM_U3_ACK_EN); + } + return IRQ_HANDLED; } diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c index db7562d99b95..ac60e9c8564e 100644 --- a/drivers/usb/mtu3/mtu3_dr.c +++ b/drivers/usb/mtu3/mtu3_dr.c @@ -174,16 +174,40 @@ static void ssusb_set_mailbox(struct otg_switch_mtk *otg_sx, } } -static int ssusb_id_notifier(struct notifier_block *nb, - unsigned long event, void *ptr) +static void ssusb_id_work(struct work_struct *work) { struct otg_switch_mtk *otg_sx = - container_of(nb, struct otg_switch_mtk, id_nb); + container_of(work, struct otg_switch_mtk, id_work); - if (event) + if (otg_sx->id_event) ssusb_set_mailbox(otg_sx, MTU3_ID_GROUND); else ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT); +} + +static void ssusb_vbus_work(struct work_struct *work) +{ + struct otg_switch_mtk *otg_sx = + container_of(work, struct otg_switch_mtk, vbus_work); + + if (otg_sx->vbus_event) + ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID); + else + ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF); +} + +/* + * @ssusb_id_notifier is called in atomic context, but @ssusb_set_mailbox + * may sleep, so use work queue here + */ +static int ssusb_id_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct otg_switch_mtk *otg_sx = + container_of(nb, struct otg_switch_mtk, id_nb); + + otg_sx->id_event = event; + schedule_work(&otg_sx->id_work); return NOTIFY_DONE; } @@ -194,10 +218,8 @@ static int ssusb_vbus_notifier(struct notifier_block *nb, struct otg_switch_mtk *otg_sx = container_of(nb, struct otg_switch_mtk, vbus_nb); - if (event) - ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID); - else - ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF); + otg_sx->vbus_event = event; + schedule_work(&otg_sx->vbus_work); return NOTIFY_DONE; } @@ -238,15 +260,6 @@ static int ssusb_extcon_register(struct otg_switch_mtk *otg_sx) return 0; } -static void extcon_register_dwork(struct work_struct *work) -{ - struct delayed_work *dwork = to_delayed_work(work); - struct otg_switch_mtk *otg_sx = - container_of(dwork, struct otg_switch_mtk, extcon_reg_dwork); - - ssusb_extcon_register(otg_sx); -} - /* * We provide an interface via debugfs to switch between host and device modes * depending on user input. @@ -365,10 +378,6 @@ static void ssusb_debugfs_init(struct ssusb_mtk *ssusb) struct dentry *root; root = debugfs_create_dir(dev_name(ssusb->dev), usb_debug_root); - if (!root) { - dev_err(ssusb->dev, "create debugfs root failed\n"); - return; - } ssusb->dbgfs_root = root; debugfs_create_file("mode", 0644, root, ssusb, &ssusb_mode_fops); @@ -407,18 +416,13 @@ int ssusb_otg_switch_init(struct ssusb_mtk *ssusb) { struct otg_switch_mtk *otg_sx = &ssusb->otg_switch; - if (otg_sx->manual_drd_enabled) { + INIT_WORK(&otg_sx->id_work, ssusb_id_work); + INIT_WORK(&otg_sx->vbus_work, ssusb_vbus_work); + + if (otg_sx->manual_drd_enabled) ssusb_debugfs_init(ssusb); - } else { - INIT_DELAYED_WORK(&otg_sx->extcon_reg_dwork, - extcon_register_dwork); - - /* - * It is enough to delay 1s for waiting for - * host initialization - */ - schedule_delayed_work(&otg_sx->extcon_reg_dwork, HZ); - } + else + ssusb_extcon_register(otg_sx); return 0; } @@ -429,6 +433,7 @@ void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb) if (otg_sx->manual_drd_enabled) ssusb_debugfs_exit(ssusb); - else - cancel_delayed_work(&otg_sx->extcon_reg_dwork); + + cancel_work_sync(&otg_sx->id_work); + cancel_work_sync(&otg_sx->vbus_work); } diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c index f05f10f5c171..5c60a8c5a0b5 100644 --- a/drivers/usb/mtu3/mtu3_gadget.c +++ b/drivers/usb/mtu3/mtu3_gadget.c @@ -660,14 +660,10 @@ int mtu3_gadget_setup(struct mtu3 *mtu) mtu3_gadget_init_eps(mtu); ret = usb_add_gadget_udc(mtu->dev, &mtu->g); - if (ret) { + if (ret) dev_err(mtu->dev, "failed to register udc\n"); - return ret; - } - usb_gadget_set_state(&mtu->g, USB_STATE_NOTATTACHED); - - return 0; + return ret; } void mtu3_gadget_cleanup(struct mtu3 *mtu) @@ -723,4 +719,5 @@ void mtu3_gadget_reset(struct mtu3 *mtu) mtu->u1_enable = 0; mtu->u2_enable = 0; mtu->delayed_status = false; + mtu->test_mode = false; } diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c index ebdcf7a38c29..25216e79cd6e 100644 --- a/drivers/usb/mtu3/mtu3_gadget_ep0.c +++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c @@ -7,6 +7,7 @@ * Author: Chunfeng.Yun <chunfeng.yun@mediatek.com> */ +#include <linux/iopoll.h> #include <linux/usb/composite.h> #include "mtu3.h" @@ -263,6 +264,7 @@ static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup) { void __iomem *mbase = mtu->mac_base; int handled = 1; + u32 value; switch (le16_to_cpu(setup->wIndex) >> 8) { case TEST_J: @@ -292,6 +294,14 @@ static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup) if (mtu->test_mode_nr == TEST_PACKET_MODE) ep0_load_test_packet(mtu); + /* send status before entering test mode. */ + value = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS; + mtu3_writel(mbase, U3D_EP0CSR, value | EP0_SETUPPKTRDY | EP0_DATAEND); + + /* wait for ACK status sent by host */ + readl_poll_timeout_atomic(mbase + U3D_EP0CSR, value, + !(value & EP0_DATAEND), 100, 5000); + mtu3_writel(mbase, U3D_USB2_TEST_MODE, mtu->test_mode_nr); mtu->ep0_state = MU3D_EP0_STATE_SETUP; @@ -546,7 +556,7 @@ static void ep0_tx_state(struct mtu3 *mtu) struct usb_request *req; u32 csr; u8 *src; - u8 count; + u32 count; u32 maxp; dev_dbg(mtu->dev, "%s\n", __func__); diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c index 628d5ce356ca..46551f6d16fd 100644 --- a/drivers/usb/mtu3/mtu3_plat.c +++ b/drivers/usb/mtu3/mtu3_plat.c @@ -447,8 +447,7 @@ static int mtu3_remove(struct platform_device *pdev) */ static int __maybe_unused mtu3_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct ssusb_mtk *ssusb = platform_get_drvdata(pdev); + struct ssusb_mtk *ssusb = dev_get_drvdata(dev); dev_dbg(dev, "%s\n", __func__); @@ -466,8 +465,7 @@ static int __maybe_unused mtu3_suspend(struct device *dev) static int __maybe_unused mtu3_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct ssusb_mtk *ssusb = platform_get_drvdata(pdev); + struct ssusb_mtk *ssusb = dev_get_drvdata(dev); int ret; dev_dbg(dev, "%s\n", __func__); diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 0ad664efda6b..660641ab1545 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -201,7 +201,6 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) struct device *dev = musb->controller; struct musb_hdrc_platform_data *plat = dev_get_platdata(dev); struct omap_musb_board_data *data = plat->board_data; - struct usb_otg *otg = musb->xceiv->otg; unsigned long flags; irqreturn_t ret = IRQ_NONE; u32 epintr, usbintr; @@ -264,14 +263,12 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); - otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&musb->dev_timer); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); - otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; portstate(musb->port1_status &= ~USB_PORT_STAT_POWER); } diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index b8295ce7c4fe..1c023c0091c4 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -223,7 +223,6 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) { struct musb *musb = hci; void __iomem *reg_base = musb->ctrl_base; - struct usb_otg *otg = musb->xceiv->otg; unsigned long flags; irqreturn_t ret = IRQ_NONE; u32 status; @@ -280,7 +279,6 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); - otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&musb->dev_timer); @@ -295,7 +293,6 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) */ musb->is_active = 0; MUSB_DEV_MODE(musb); - otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; portstate(musb->port1_status &= ~USB_PORT_STAT_POWER); } diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 2ad39dcd2f4c..fb6bbd254ab7 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -311,14 +311,12 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); - otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&musb->dev_timer); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); - otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; portstate(musb->port1_status &= ~USB_PORT_STAT_POWER); } @@ -425,6 +423,9 @@ unregister: static int davinci_musb_exit(struct musb *musb) { + int maxdelay = 30; + u8 devctl, warn = 0; + del_timer_sync(&musb->dev_timer); /* force VBUS off */ @@ -438,31 +439,27 @@ static int davinci_musb_exit(struct musb *musb) davinci_musb_source_power(musb, 0 /*off*/, 1); - /* delay, to avoid problems with module reload */ - if (musb->xceiv->otg->default_a) { - int maxdelay = 30; - u8 devctl, warn = 0; + /* + * delay, to avoid problems with module reload. + * if there's no peripheral connected, this can take a + * long time to fall, especially on EVM with huge C133. + */ + do { + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + if (!(devctl & MUSB_DEVCTL_VBUS)) + break; + if ((devctl & MUSB_DEVCTL_VBUS) != warn) { + warn = devctl & MUSB_DEVCTL_VBUS; + dev_dbg(musb->controller, "VBUS %d\n", + warn >> MUSB_DEVCTL_VBUS_SHIFT); + } + msleep(1000); + maxdelay--; + } while (maxdelay > 0); - /* if there's no peripheral connected, this can take a - * long time to fall, especially on EVM with huge C133. - */ - do { - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - if (!(devctl & MUSB_DEVCTL_VBUS)) - break; - if ((devctl & MUSB_DEVCTL_VBUS) != warn) { - warn = devctl & MUSB_DEVCTL_VBUS; - dev_dbg(musb->controller, "VBUS %d\n", - warn >> MUSB_DEVCTL_VBUS_SHIFT); - } - msleep(1000); - maxdelay--; - } while (maxdelay > 0); - - /* in OTG mode, another host might be connected */ - if (devctl & MUSB_DEVCTL_VBUS) - dev_dbg(musb->controller, "VBUS off timeout (devctl %02x)\n", devctl); - } + /* in OTG mode, another host might be connected */ + if (devctl & MUSB_DEVCTL_VBUS) + dev_dbg(musb->controller, "VBUS off timeout (devctl %02x)\n", devctl); phy_off(); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index fb5e4523dc28..b7d56272f9d1 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -274,20 +274,6 @@ static void musb_default_writew(void __iomem *addr, unsigned offset, u16 data) __raw_writew(data, addr + offset); } -static u32 musb_default_readl(const void __iomem *addr, unsigned offset) -{ - u32 data = __raw_readl(addr + offset); - - trace_musb_readl(__builtin_return_address(0), addr, offset, data); - return data; -} - -static void musb_default_writel(void __iomem *addr, unsigned offset, u32 data) -{ - trace_musb_writel(__builtin_return_address(0), addr, offset, data); - __raw_writel(data, addr + offset); -} - /* * Load an endpoint's FIFO */ @@ -390,10 +376,20 @@ EXPORT_SYMBOL_GPL(musb_readw); void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data); EXPORT_SYMBOL_GPL(musb_writew); -u32 (*musb_readl)(const void __iomem *addr, unsigned offset); +u32 musb_readl(const void __iomem *addr, unsigned offset) +{ + u32 data = __raw_readl(addr + offset); + + trace_musb_readl(__builtin_return_address(0), addr, offset, data); + return data; +} EXPORT_SYMBOL_GPL(musb_readl); -void (*musb_writel)(void __iomem *addr, unsigned offset, u32 data); +void musb_writel(void __iomem *addr, unsigned offset, u32 data) +{ + trace_musb_writel(__builtin_return_address(0), addr, offset, data); + __raw_writel(data, addr + offset); +} EXPORT_SYMBOL_GPL(musb_writel); #ifndef CONFIG_MUSB_PIO_ONLY @@ -527,6 +523,383 @@ void musb_hnp_stop(struct musb *musb) static void musb_recover_from_babble(struct musb *musb); +static void musb_handle_intr_resume(struct musb *musb, u8 devctl) +{ + musb_dbg(musb, "RESUME (%s)", + usb_otg_state_string(musb->xceiv->otg->state)); + + if (devctl & MUSB_DEVCTL_HM) { + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_SUSPEND: + /* remote wakeup? */ + musb->port1_status |= + (USB_PORT_STAT_C_SUSPEND << 16) + | MUSB_PORT_STAT_RESUME; + musb->rh_timer = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); + musb->xceiv->otg->state = OTG_STATE_A_HOST; + musb->is_active = 1; + musb_host_resume_root_hub(musb); + schedule_delayed_work(&musb->finish_resume_work, + msecs_to_jiffies(USB_RESUME_TIMEOUT)); + break; + case OTG_STATE_B_WAIT_ACON: + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; + musb->is_active = 1; + MUSB_DEV_MODE(musb); + break; + default: + WARNING("bogus %s RESUME (%s)\n", + "host", + usb_otg_state_string(musb->xceiv->otg->state)); + } + } else { + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_SUSPEND: + /* possibly DISCONNECT is upcoming */ + musb->xceiv->otg->state = OTG_STATE_A_HOST; + musb_host_resume_root_hub(musb); + break; + case OTG_STATE_B_WAIT_ACON: + case OTG_STATE_B_PERIPHERAL: + /* disconnect while suspended? we may + * not get a disconnect irq... + */ + if ((devctl & MUSB_DEVCTL_VBUS) + != (3 << MUSB_DEVCTL_VBUS_SHIFT) + ) { + musb->int_usb |= MUSB_INTR_DISCONNECT; + musb->int_usb &= ~MUSB_INTR_SUSPEND; + break; + } + musb_g_resume(musb); + break; + case OTG_STATE_B_IDLE: + musb->int_usb &= ~MUSB_INTR_SUSPEND; + break; + default: + WARNING("bogus %s RESUME (%s)\n", + "peripheral", + usb_otg_state_string(musb->xceiv->otg->state)); + } + } +} + +/* return IRQ_HANDLED to tell the caller to return immediately */ +static irqreturn_t musb_handle_intr_sessreq(struct musb *musb, u8 devctl) +{ + void __iomem *mbase = musb->mregs; + + if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS + && (devctl & MUSB_DEVCTL_BDEVICE)) { + musb_dbg(musb, "SessReq while on B state"); + return IRQ_HANDLED; + } + + musb_dbg(musb, "SESSION_REQUEST (%s)", + usb_otg_state_string(musb->xceiv->otg->state)); + + /* IRQ arrives from ID pin sense or (later, if VBUS power + * is removed) SRP. responses are time critical: + * - turn on VBUS (with silicon-specific mechanism) + * - go through A_WAIT_VRISE + * - ... to A_WAIT_BCON. + * a_wait_vrise_tmout triggers VBUS_ERROR transitions + */ + musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); + musb->ep0_stage = MUSB_EP0_START; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; + MUSB_HST_MODE(musb); + musb_platform_set_vbus(musb, 1); + + return IRQ_NONE; +} + +static void musb_handle_intr_vbuserr(struct musb *musb, u8 devctl) +{ + int ignore = 0; + + /* During connection as an A-Device, we may see a short + * current spikes causing voltage drop, because of cable + * and peripheral capacitance combined with vbus draw. + * (So: less common with truly self-powered devices, where + * vbus doesn't act like a power supply.) + * + * Such spikes are short; usually less than ~500 usec, max + * of ~2 msec. That is, they're not sustained overcurrent + * errors, though they're reported using VBUSERROR irqs. + * + * Workarounds: (a) hardware: use self powered devices. + * (b) software: ignore non-repeated VBUS errors. + * + * REVISIT: do delays from lots of DEBUG_KERNEL checks + * make trouble here, keeping VBUS < 4.4V ? + */ + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_HOST: + /* recovery is dicey once we've gotten past the + * initial stages of enumeration, but if VBUS + * stayed ok at the other end of the link, and + * another reset is due (at least for high speed, + * to redo the chirp etc), it might work OK... + */ + case OTG_STATE_A_WAIT_BCON: + case OTG_STATE_A_WAIT_VRISE: + if (musb->vbuserr_retry) { + void __iomem *mbase = musb->mregs; + + musb->vbuserr_retry--; + ignore = 1; + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(mbase, MUSB_DEVCTL, devctl); + } else { + musb->port1_status |= + USB_PORT_STAT_OVERCURRENT + | (USB_PORT_STAT_C_OVERCURRENT << 16); + } + break; + default: + break; + } + + dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller, + "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n", + usb_otg_state_string(musb->xceiv->otg->state), + devctl, + ({ char *s; + switch (devctl & MUSB_DEVCTL_VBUS) { + case 0 << MUSB_DEVCTL_VBUS_SHIFT: + s = "<SessEnd"; break; + case 1 << MUSB_DEVCTL_VBUS_SHIFT: + s = "<AValid"; break; + case 2 << MUSB_DEVCTL_VBUS_SHIFT: + s = "<VBusValid"; break; + /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */ + default: + s = "VALID"; break; + } s; }), + VBUSERR_RETRY_COUNT - musb->vbuserr_retry, + musb->port1_status); + + /* go through A_WAIT_VFALL then start a new session */ + if (!ignore) + musb_platform_set_vbus(musb, 0); +} + +static void musb_handle_intr_suspend(struct musb *musb, u8 devctl) +{ + musb_dbg(musb, "SUSPEND (%s) devctl %02x", + usb_otg_state_string(musb->xceiv->otg->state), devctl); + + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_PERIPHERAL: + /* We also come here if the cable is removed, since + * this silicon doesn't report ID-no-longer-grounded. + * + * We depend on T(a_wait_bcon) to shut us down, and + * hope users don't do anything dicey during this + * undesired detour through A_WAIT_BCON. + */ + musb_hnp_stop(musb); + musb_host_resume_root_hub(musb); + musb_root_disconnect(musb); + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon + ? : OTG_TIME_A_WAIT_BCON)); + + break; + case OTG_STATE_B_IDLE: + if (!musb->is_active) + break; + /* fall through */ + case OTG_STATE_B_PERIPHERAL: + musb_g_suspend(musb); + musb->is_active = musb->g.b_hnp_enable; + if (musb->is_active) { + musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON; + musb_dbg(musb, "HNP: Setting timer for b_ase0_brst"); + mod_timer(&musb->otg_timer, jiffies + + msecs_to_jiffies( + OTG_TIME_B_ASE0_BRST)); + } + break; + case OTG_STATE_A_WAIT_BCON: + if (musb->a_wait_bcon != 0) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; + case OTG_STATE_A_HOST: + musb->xceiv->otg->state = OTG_STATE_A_SUSPEND; + musb->is_active = musb->hcd->self.b_hnp_enable; + break; + case OTG_STATE_B_HOST: + /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ + musb_dbg(musb, "REVISIT: SUSPEND as B_HOST"); + break; + default: + /* "should not happen" */ + musb->is_active = 0; + break; + } +} + +static void musb_handle_intr_connect(struct musb *musb, u8 devctl, u8 int_usb) +{ + struct usb_hcd *hcd = musb->hcd; + + musb->is_active = 1; + musb->ep0_stage = MUSB_EP0_START; + + musb->intrtxe = musb->epmask; + musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); + musb->intrrxe = musb->epmask & 0xfffe; + musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe); + musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7); + musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED + |USB_PORT_STAT_HIGH_SPEED + |USB_PORT_STAT_ENABLE + ); + musb->port1_status |= USB_PORT_STAT_CONNECTION + |(USB_PORT_STAT_C_CONNECTION << 16); + + /* high vs full speed is just a guess until after reset */ + if (devctl & MUSB_DEVCTL_LSDEV) + musb->port1_status |= USB_PORT_STAT_LOW_SPEED; + + /* indicate new connection to OTG machine */ + switch (musb->xceiv->otg->state) { + case OTG_STATE_B_PERIPHERAL: + if (int_usb & MUSB_INTR_SUSPEND) { + musb_dbg(musb, "HNP: SUSPEND+CONNECT, now b_host"); + int_usb &= ~MUSB_INTR_SUSPEND; + goto b_host; + } else + musb_dbg(musb, "CONNECT as b_peripheral???"); + break; + case OTG_STATE_B_WAIT_ACON: + musb_dbg(musb, "HNP: CONNECT, now b_host"); +b_host: + musb->xceiv->otg->state = OTG_STATE_B_HOST; + if (musb->hcd) + musb->hcd->self.is_b_host = 1; + del_timer(&musb->otg_timer); + break; + default: + if ((devctl & MUSB_DEVCTL_VBUS) + == (3 << MUSB_DEVCTL_VBUS_SHIFT)) { + musb->xceiv->otg->state = OTG_STATE_A_HOST; + if (hcd) + hcd->self.is_b_host = 0; + } + break; + } + + musb_host_poke_root_hub(musb); + + musb_dbg(musb, "CONNECT (%s) devctl %02x", + usb_otg_state_string(musb->xceiv->otg->state), devctl); +} + +static void musb_handle_intr_disconnect(struct musb *musb, u8 devctl) +{ + musb_dbg(musb, "DISCONNECT (%s) as %s, devctl %02x", + usb_otg_state_string(musb->xceiv->otg->state), + MUSB_MODE(musb), devctl); + + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_HOST: + case OTG_STATE_A_SUSPEND: + musb_host_resume_root_hub(musb); + musb_root_disconnect(musb); + if (musb->a_wait_bcon != 0) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; + case OTG_STATE_B_HOST: + /* REVISIT this behaves for "real disconnect" + * cases; make sure the other transitions from + * from B_HOST act right too. The B_HOST code + * in hnp_stop() is currently not used... + */ + musb_root_disconnect(musb); + if (musb->hcd) + musb->hcd->self.is_b_host = 0; + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; + MUSB_DEV_MODE(musb); + musb_g_disconnect(musb); + break; + case OTG_STATE_A_PERIPHERAL: + musb_hnp_stop(musb); + musb_root_disconnect(musb); + /* FALLTHROUGH */ + case OTG_STATE_B_WAIT_ACON: + /* FALLTHROUGH */ + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_IDLE: + musb_g_disconnect(musb); + break; + default: + WARNING("unhandled DISCONNECT transition (%s)\n", + usb_otg_state_string(musb->xceiv->otg->state)); + break; + } +} + +/* + * mentor saves a bit: bus reset and babble share the same irq. + * only host sees babble; only peripheral sees bus reset. + */ +static void musb_handle_intr_reset(struct musb *musb) +{ + if (is_host_active(musb)) { + /* + * When BABBLE happens what we can depends on which + * platform MUSB is running, because some platforms + * implemented proprietary means for 'recovering' from + * Babble conditions. One such platform is AM335x. In + * most cases, however, the only thing we can do is + * drop the session. + */ + dev_err(musb->controller, "Babble\n"); + musb_recover_from_babble(musb); + } else { + musb_dbg(musb, "BUS RESET as %s", + usb_otg_state_string(musb->xceiv->otg->state)); + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_SUSPEND: + musb_g_reset(musb); + /* FALLTHROUGH */ + case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ + /* never use invalid T(a_wait_bcon) */ + musb_dbg(musb, "HNP: in %s, %d msec timeout", + usb_otg_state_string(musb->xceiv->otg->state), + TA_WAIT_BCON(musb)); + mod_timer(&musb->otg_timer, jiffies + + msecs_to_jiffies(TA_WAIT_BCON(musb))); + break; + case OTG_STATE_A_PERIPHERAL: + del_timer(&musb->otg_timer); + musb_g_reset(musb); + break; + case OTG_STATE_B_WAIT_ACON: + musb_dbg(musb, "HNP: RESET (%s), to b_peripheral", + usb_otg_state_string(musb->xceiv->otg->state)); + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; + musb_g_reset(musb); + break; + case OTG_STATE_B_IDLE: + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; + /* FALLTHROUGH */ + case OTG_STATE_B_PERIPHERAL: + musb_g_reset(musb); + break; + default: + musb_dbg(musb, "Unhandled BUS RESET as %s", + usb_otg_state_string(musb->xceiv->otg->state)); + } + } +} + /* * Interrupt Service Routine to record USB "global" interrupts. * Since these do not happen often and signify things of @@ -551,379 +924,40 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, * spurious RESUME irqs happen too, paired with SUSPEND. */ if (int_usb & MUSB_INTR_RESUME) { + musb_handle_intr_resume(musb, devctl); handled = IRQ_HANDLED; - musb_dbg(musb, "RESUME (%s)", - usb_otg_state_string(musb->xceiv->otg->state)); - - if (devctl & MUSB_DEVCTL_HM) { - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_SUSPEND: - /* remote wakeup? */ - musb->port1_status |= - (USB_PORT_STAT_C_SUSPEND << 16) - | MUSB_PORT_STAT_RESUME; - musb->rh_timer = jiffies - + msecs_to_jiffies(USB_RESUME_TIMEOUT); - musb->xceiv->otg->state = OTG_STATE_A_HOST; - musb->is_active = 1; - musb_host_resume_root_hub(musb); - schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(USB_RESUME_TIMEOUT)); - break; - case OTG_STATE_B_WAIT_ACON: - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - musb->is_active = 1; - MUSB_DEV_MODE(musb); - break; - default: - WARNING("bogus %s RESUME (%s)\n", - "host", - usb_otg_state_string(musb->xceiv->otg->state)); - } - } else { - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_SUSPEND: - /* possibly DISCONNECT is upcoming */ - musb->xceiv->otg->state = OTG_STATE_A_HOST; - musb_host_resume_root_hub(musb); - break; - case OTG_STATE_B_WAIT_ACON: - case OTG_STATE_B_PERIPHERAL: - /* disconnect while suspended? we may - * not get a disconnect irq... - */ - if ((devctl & MUSB_DEVCTL_VBUS) - != (3 << MUSB_DEVCTL_VBUS_SHIFT) - ) { - musb->int_usb |= MUSB_INTR_DISCONNECT; - musb->int_usb &= ~MUSB_INTR_SUSPEND; - break; - } - musb_g_resume(musb); - break; - case OTG_STATE_B_IDLE: - musb->int_usb &= ~MUSB_INTR_SUSPEND; - break; - default: - WARNING("bogus %s RESUME (%s)\n", - "peripheral", - usb_otg_state_string(musb->xceiv->otg->state)); - } - } } /* see manual for the order of the tests */ if (int_usb & MUSB_INTR_SESSREQ) { - void __iomem *mbase = musb->mregs; - - if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS - && (devctl & MUSB_DEVCTL_BDEVICE)) { - musb_dbg(musb, "SessReq while on B state"); + if (musb_handle_intr_sessreq(musb, devctl)) return IRQ_HANDLED; - } - - musb_dbg(musb, "SESSION_REQUEST (%s)", - usb_otg_state_string(musb->xceiv->otg->state)); - - /* IRQ arrives from ID pin sense or (later, if VBUS power - * is removed) SRP. responses are time critical: - * - turn on VBUS (with silicon-specific mechanism) - * - go through A_WAIT_VRISE - * - ... to A_WAIT_BCON. - * a_wait_vrise_tmout triggers VBUS_ERROR transitions - */ - musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); - musb->ep0_stage = MUSB_EP0_START; - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - MUSB_HST_MODE(musb); - musb_platform_set_vbus(musb, 1); - handled = IRQ_HANDLED; } if (int_usb & MUSB_INTR_VBUSERROR) { - int ignore = 0; - - /* During connection as an A-Device, we may see a short - * current spikes causing voltage drop, because of cable - * and peripheral capacitance combined with vbus draw. - * (So: less common with truly self-powered devices, where - * vbus doesn't act like a power supply.) - * - * Such spikes are short; usually less than ~500 usec, max - * of ~2 msec. That is, they're not sustained overcurrent - * errors, though they're reported using VBUSERROR irqs. - * - * Workarounds: (a) hardware: use self powered devices. - * (b) software: ignore non-repeated VBUS errors. - * - * REVISIT: do delays from lots of DEBUG_KERNEL checks - * make trouble here, keeping VBUS < 4.4V ? - */ - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_HOST: - /* recovery is dicey once we've gotten past the - * initial stages of enumeration, but if VBUS - * stayed ok at the other end of the link, and - * another reset is due (at least for high speed, - * to redo the chirp etc), it might work OK... - */ - case OTG_STATE_A_WAIT_BCON: - case OTG_STATE_A_WAIT_VRISE: - if (musb->vbuserr_retry) { - void __iomem *mbase = musb->mregs; - - musb->vbuserr_retry--; - ignore = 1; - devctl |= MUSB_DEVCTL_SESSION; - musb_writeb(mbase, MUSB_DEVCTL, devctl); - } else { - musb->port1_status |= - USB_PORT_STAT_OVERCURRENT - | (USB_PORT_STAT_C_OVERCURRENT << 16); - } - break; - default: - break; - } - - dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller, - "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n", - usb_otg_state_string(musb->xceiv->otg->state), - devctl, - ({ char *s; - switch (devctl & MUSB_DEVCTL_VBUS) { - case 0 << MUSB_DEVCTL_VBUS_SHIFT: - s = "<SessEnd"; break; - case 1 << MUSB_DEVCTL_VBUS_SHIFT: - s = "<AValid"; break; - case 2 << MUSB_DEVCTL_VBUS_SHIFT: - s = "<VBusValid"; break; - /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */ - default: - s = "VALID"; break; - } s; }), - VBUSERR_RETRY_COUNT - musb->vbuserr_retry, - musb->port1_status); - - /* go through A_WAIT_VFALL then start a new session */ - if (!ignore) - musb_platform_set_vbus(musb, 0); + musb_handle_intr_vbuserr(musb, devctl); handled = IRQ_HANDLED; } if (int_usb & MUSB_INTR_SUSPEND) { - musb_dbg(musb, "SUSPEND (%s) devctl %02x", - usb_otg_state_string(musb->xceiv->otg->state), devctl); + musb_handle_intr_suspend(musb, devctl); handled = IRQ_HANDLED; - - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_PERIPHERAL: - /* We also come here if the cable is removed, since - * this silicon doesn't report ID-no-longer-grounded. - * - * We depend on T(a_wait_bcon) to shut us down, and - * hope users don't do anything dicey during this - * undesired detour through A_WAIT_BCON. - */ - musb_hnp_stop(musb); - musb_host_resume_root_hub(musb); - musb_root_disconnect(musb); - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon - ? : OTG_TIME_A_WAIT_BCON)); - - break; - case OTG_STATE_B_IDLE: - if (!musb->is_active) - break; - /* fall through */ - case OTG_STATE_B_PERIPHERAL: - musb_g_suspend(musb); - musb->is_active = musb->g.b_hnp_enable; - if (musb->is_active) { - musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON; - musb_dbg(musb, "HNP: Setting timer for b_ase0_brst"); - mod_timer(&musb->otg_timer, jiffies - + msecs_to_jiffies( - OTG_TIME_B_ASE0_BRST)); - } - break; - case OTG_STATE_A_WAIT_BCON: - if (musb->a_wait_bcon != 0) - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon)); - break; - case OTG_STATE_A_HOST: - musb->xceiv->otg->state = OTG_STATE_A_SUSPEND; - musb->is_active = musb->hcd->self.b_hnp_enable; - break; - case OTG_STATE_B_HOST: - /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ - musb_dbg(musb, "REVISIT: SUSPEND as B_HOST"); - break; - default: - /* "should not happen" */ - musb->is_active = 0; - break; - } } if (int_usb & MUSB_INTR_CONNECT) { - struct usb_hcd *hcd = musb->hcd; - + musb_handle_intr_connect(musb, devctl, int_usb); handled = IRQ_HANDLED; - musb->is_active = 1; - - musb->ep0_stage = MUSB_EP0_START; - - musb->intrtxe = musb->epmask; - musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); - musb->intrrxe = musb->epmask & 0xfffe; - musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe); - musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7); - musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED - |USB_PORT_STAT_HIGH_SPEED - |USB_PORT_STAT_ENABLE - ); - musb->port1_status |= USB_PORT_STAT_CONNECTION - |(USB_PORT_STAT_C_CONNECTION << 16); - - /* high vs full speed is just a guess until after reset */ - if (devctl & MUSB_DEVCTL_LSDEV) - musb->port1_status |= USB_PORT_STAT_LOW_SPEED; - - /* indicate new connection to OTG machine */ - switch (musb->xceiv->otg->state) { - case OTG_STATE_B_PERIPHERAL: - if (int_usb & MUSB_INTR_SUSPEND) { - musb_dbg(musb, "HNP: SUSPEND+CONNECT, now b_host"); - int_usb &= ~MUSB_INTR_SUSPEND; - goto b_host; - } else - musb_dbg(musb, "CONNECT as b_peripheral???"); - break; - case OTG_STATE_B_WAIT_ACON: - musb_dbg(musb, "HNP: CONNECT, now b_host"); -b_host: - musb->xceiv->otg->state = OTG_STATE_B_HOST; - if (musb->hcd) - musb->hcd->self.is_b_host = 1; - del_timer(&musb->otg_timer); - break; - default: - if ((devctl & MUSB_DEVCTL_VBUS) - == (3 << MUSB_DEVCTL_VBUS_SHIFT)) { - musb->xceiv->otg->state = OTG_STATE_A_HOST; - if (hcd) - hcd->self.is_b_host = 0; - } - break; - } - - musb_host_poke_root_hub(musb); - - musb_dbg(musb, "CONNECT (%s) devctl %02x", - usb_otg_state_string(musb->xceiv->otg->state), devctl); } if (int_usb & MUSB_INTR_DISCONNECT) { - musb_dbg(musb, "DISCONNECT (%s) as %s, devctl %02x", - usb_otg_state_string(musb->xceiv->otg->state), - MUSB_MODE(musb), devctl); + musb_handle_intr_disconnect(musb, devctl); handled = IRQ_HANDLED; - - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_HOST: - case OTG_STATE_A_SUSPEND: - musb_host_resume_root_hub(musb); - musb_root_disconnect(musb); - if (musb->a_wait_bcon != 0) - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon)); - break; - case OTG_STATE_B_HOST: - /* REVISIT this behaves for "real disconnect" - * cases; make sure the other transitions from - * from B_HOST act right too. The B_HOST code - * in hnp_stop() is currently not used... - */ - musb_root_disconnect(musb); - if (musb->hcd) - musb->hcd->self.is_b_host = 0; - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - MUSB_DEV_MODE(musb); - musb_g_disconnect(musb); - break; - case OTG_STATE_A_PERIPHERAL: - musb_hnp_stop(musb); - musb_root_disconnect(musb); - /* FALLTHROUGH */ - case OTG_STATE_B_WAIT_ACON: - /* FALLTHROUGH */ - case OTG_STATE_B_PERIPHERAL: - case OTG_STATE_B_IDLE: - musb_g_disconnect(musb); - break; - default: - WARNING("unhandled DISCONNECT transition (%s)\n", - usb_otg_state_string(musb->xceiv->otg->state)); - break; - } } - /* mentor saves a bit: bus reset and babble share the same irq. - * only host sees babble; only peripheral sees bus reset. - */ if (int_usb & MUSB_INTR_RESET) { + musb_handle_intr_reset(musb); handled = IRQ_HANDLED; - if (is_host_active(musb)) { - /* - * When BABBLE happens what we can depends on which - * platform MUSB is running, because some platforms - * implemented proprietary means for 'recovering' from - * Babble conditions. One such platform is AM335x. In - * most cases, however, the only thing we can do is - * drop the session. - */ - dev_err(musb->controller, "Babble\n"); - musb_recover_from_babble(musb); - } else { - musb_dbg(musb, "BUS RESET as %s", - usb_otg_state_string(musb->xceiv->otg->state)); - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_SUSPEND: - musb_g_reset(musb); - /* FALLTHROUGH */ - case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ - /* never use invalid T(a_wait_bcon) */ - musb_dbg(musb, "HNP: in %s, %d msec timeout", - usb_otg_state_string(musb->xceiv->otg->state), - TA_WAIT_BCON(musb)); - mod_timer(&musb->otg_timer, jiffies - + msecs_to_jiffies(TA_WAIT_BCON(musb))); - break; - case OTG_STATE_A_PERIPHERAL: - del_timer(&musb->otg_timer); - musb_g_reset(musb); - break; - case OTG_STATE_B_WAIT_ACON: - musb_dbg(musb, "HNP: RESET (%s), to b_peripheral", - usb_otg_state_string(musb->xceiv->otg->state)); - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - musb_g_reset(musb); - break; - case OTG_STATE_B_IDLE: - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - /* FALLTHROUGH */ - case OTG_STATE_B_PERIPHERAL: - musb_g_reset(musb); - break; - default: - musb_dbg(musb, "Unhandled BUS RESET as %s", - usb_otg_state_string(musb->xceiv->otg->state)); - } - } } #if 0 @@ -1042,7 +1076,7 @@ void musb_start(struct musb *musb) * (b) vbus present/connect IRQ, peripheral mode; * (c) peripheral initiates, using SRP */ - if (musb->port_mode != MUSB_PORT_MODE_HOST && + if (musb->port_mode != MUSB_HOST && musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON && (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { musb->is_active = 1; @@ -1244,25 +1278,25 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, /* REVISIT error check: be sure ep0 can both rx and tx ... */ switch (cfg->style) { case FIFO_TX: - musb_write_txfifosz(mbase, c_size); - musb_write_txfifoadd(mbase, c_off); + musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); + musb_writew(mbase, MUSB_TXFIFOADD, c_off); hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); hw_ep->max_packet_sz_tx = maxpacket; break; case FIFO_RX: - musb_write_rxfifosz(mbase, c_size); - musb_write_rxfifoadd(mbase, c_off); + musb_writeb(mbase, MUSB_RXFIFOSZ, c_size); + musb_writew(mbase, MUSB_RXFIFOADD, c_off); hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); hw_ep->max_packet_sz_rx = maxpacket; break; case FIFO_RXTX: - musb_write_txfifosz(mbase, c_size); - musb_write_txfifoadd(mbase, c_off); + musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); + musb_writew(mbase, MUSB_TXFIFOADD, c_off); hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); hw_ep->max_packet_sz_rx = maxpacket; - musb_write_rxfifosz(mbase, c_size); - musb_write_rxfifoadd(mbase, c_off); + musb_writeb(mbase, MUSB_RXFIFOSZ, c_size); + musb_writew(mbase, MUSB_RXFIFOADD, c_off); hw_ep->tx_double_buffered = hw_ep->rx_double_buffered; hw_ep->max_packet_sz_tx = maxpacket; @@ -1470,7 +1504,7 @@ static int musb_core_init(u16 musb_type, struct musb *musb) } /* log release info */ - musb->hwvers = musb_read_hwvers(mbase); + musb->hwvers = musb_readw(mbase, MUSB_HWVERS); pr_debug("%s: %sHDRC RTL version %d.%d%s\n", musb_driver_name, type, MUSB_HWVERS_MAJOR(musb->hwvers), MUSB_HWVERS_MINOR(musb->hwvers), @@ -1497,7 +1531,7 @@ static int musb_core_init(u16 musb_type, struct musb *musb) hw_ep->fifo = musb->io.fifo_offset(i) + mbase; #if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010) - if (musb->io.quirks & MUSB_IN_TUSB) { + if (musb->ops->quirks & MUSB_IN_TUSB) { hw_ep->fifo_async = musb->async + 0x400 + musb->io.fifo_offset(i); hw_ep->fifo_sync = musb->sync + 0x400 + @@ -2158,8 +2192,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_writeb = musb_default_writeb; musb_readw = musb_default_readw; musb_writew = musb_default_writew; - musb_readl = musb_default_readl; - musb_writel = musb_default_writel; /* The musb_platform_init() call: * - adjusts musb->mregs @@ -2182,11 +2214,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) goto fail2; } - if (musb->ops->quirks) - musb->io.quirks = musb->ops->quirks; /* Most devices use indexed offset or flat offset */ - if (musb->io.quirks & MUSB_INDEXED_EP) { + if (musb->ops->quirks & MUSB_INDEXED_EP) { musb->io.ep_offset = musb_indexed_ep_offset; musb->io.ep_select = musb_indexed_ep_select; } else { @@ -2194,7 +2224,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb->io.ep_select = musb_flat_ep_select; } - if (musb->io.quirks & MUSB_G_NO_SKB_RESERVE) + if (musb->ops->quirks & MUSB_G_NO_SKB_RESERVE) musb->g.quirk_avoids_skb_reserve = 1; /* At least tusb6010 has its own offsets */ @@ -2226,10 +2256,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_readw = musb->ops->readw; if (musb->ops->writew) musb_writew = musb->ops->writew; - if (musb->ops->readl) - musb_readl = musb->ops->readl; - if (musb->ops->writel) - musb_writel = musb->ops->writel; #ifndef CONFIG_MUSB_PIO_ONLY if (!musb->ops->dma_init || !musb->ops->dma_exit) { @@ -2321,33 +2347,28 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) /* program PHY to use external vBus if required */ if (plat->extvbus) { - u8 busctl = musb_read_ulpi_buscontrol(musb->mregs); + u8 busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL); busctl |= MUSB_ULPI_USE_EXTVBUS; - musb_write_ulpi_buscontrol(musb->mregs, busctl); + musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl); } - if (musb->xceiv->otg->default_a) { - MUSB_HST_MODE(musb); - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - } else { - MUSB_DEV_MODE(musb); - musb->xceiv->otg->state = OTG_STATE_B_IDLE; - } + MUSB_DEV_MODE(musb); + musb->xceiv->otg->state = OTG_STATE_B_IDLE; switch (musb->port_mode) { - case MUSB_PORT_MODE_HOST: + case MUSB_HOST: status = musb_host_setup(musb, plat->power); if (status < 0) goto fail3; status = musb_platform_set_mode(musb, MUSB_HOST); break; - case MUSB_PORT_MODE_GADGET: + case MUSB_PERIPHERAL: status = musb_gadget_setup(musb); if (status < 0) goto fail3; status = musb_platform_set_mode(musb, MUSB_PERIPHERAL); break; - case MUSB_PORT_MODE_DUAL_ROLE: + case MUSB_OTG: status = musb_host_setup(musb, plat->power); if (status < 0) goto fail3; @@ -2366,9 +2387,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (status < 0) goto fail3; - status = musb_init_debugfs(musb); - if (status < 0) - goto fail4; + musb_init_debugfs(musb); status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group); if (status) @@ -2383,7 +2402,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) fail5: musb_exit_debugfs(musb); -fail4: musb_gadget_cleanup(musb); musb_host_cleanup(musb); @@ -2492,7 +2510,7 @@ static void musb_save_context(struct musb *musb) musb->context.frame = musb_readw(musb_base, MUSB_FRAME); musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE); - musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs); + musb->context.busctl = musb_readb(musb_base, MUSB_ULPI_BUSCONTROL); musb->context.power = musb_readb(musb_base, MUSB_POWER); musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE); musb->context.index = musb_readb(musb_base, MUSB_INDEX); @@ -2521,13 +2539,13 @@ static void musb_save_context(struct musb *musb) if (musb->dyn_fifo) { musb->context.index_regs[i].txfifoadd = - musb_read_txfifoadd(musb_base); + musb_readw(musb_base, MUSB_TXFIFOADD); musb->context.index_regs[i].rxfifoadd = - musb_read_rxfifoadd(musb_base); + musb_readw(musb_base, MUSB_RXFIFOADD); musb->context.index_regs[i].txfifosz = - musb_read_txfifosz(musb_base); + musb_readb(musb_base, MUSB_TXFIFOSZ); musb->context.index_regs[i].rxfifosz = - musb_read_rxfifosz(musb_base); + musb_readb(musb_base, MUSB_RXFIFOSZ); } musb->context.index_regs[i].txtype = @@ -2564,7 +2582,7 @@ static void musb_restore_context(struct musb *musb) musb_writew(musb_base, MUSB_FRAME, musb->context.frame); musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); - musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); + musb_writeb(musb_base, MUSB_ULPI_BUSCONTROL, musb->context.busctl); /* Don't affect SUSPENDM/RESUME bits in POWER reg */ power = musb_readb(musb_base, MUSB_POWER); @@ -2601,13 +2619,13 @@ static void musb_restore_context(struct musb *musb) musb->context.index_regs[i].rxcsr); if (musb->dyn_fifo) { - musb_write_txfifosz(musb_base, + musb_writeb(musb_base, MUSB_TXFIFOSZ, musb->context.index_regs[i].txfifosz); - musb_write_rxfifosz(musb_base, + musb_writeb(musb_base, MUSB_RXFIFOSZ, musb->context.index_regs[i].rxfifosz); - musb_write_txfifoadd(musb_base, + musb_writew(musb_base, MUSB_TXFIFOADD, musb->context.index_regs[i].txfifoadd); - musb_write_rxfifoadd(musb_base, + musb_writew(musb_base, MUSB_RXFIFOADD, musb->context.index_regs[i].rxfifoadd); } @@ -2657,7 +2675,7 @@ static int musb_suspend(struct device *dev) ; musb->flush_irq_work = false; - if (!(musb->io.quirks & MUSB_PRESERVE_SESSION)) + if (!(musb->ops->quirks & MUSB_PRESERVE_SESSION)) musb_writeb(musb->mregs, MUSB_DEVCTL, 0); WARN_ON(!list_empty(&musb->pending_list)); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 8a74cb2907f8..04203b7126d5 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -53,12 +53,6 @@ struct musb_ep; #define is_peripheral_active(m) (!(m)->is_host) #define is_host_active(m) ((m)->is_host) -enum { - MUSB_PORT_MODE_HOST = 1, - MUSB_PORT_MODE_GADGET, - MUSB_PORT_MODE_DUAL_ROLE, -}; - /****************************** CONSTANTS ********************************/ #ifndef MUSB_C_NUM_EPS @@ -127,8 +121,6 @@ struct musb_io; * @writeb: write 8 bits * @readw: read 16 bits * @writew: write 16 bits - * @readl: read 32 bits - * @writel: write 32 bits * @read_fifo: reads the fifo * @write_fifo: writes to fifo * @dma_init: platform specific dma init function @@ -140,7 +132,6 @@ struct musb_io; * @recover: platform-specific babble recovery * @vbus_status: returns vbus status if possible * @set_vbus: forces vbus status - * @adjust_channel_params: pre check for standard dma channel_program func * @pre_root_reset_end: called before the root usb port reset flag gets cleared * @post_root_reset_end: called after the root usb port reset flag gets cleared * @phy_callback: optional callback function for the phy to call @@ -174,8 +165,6 @@ struct musb_platform_ops { void (*writeb)(void __iomem *addr, unsigned offset, u8 data); u16 (*readw)(const void __iomem *addr, unsigned offset); void (*writew)(void __iomem *addr, unsigned offset, u16 data); - u32 (*readl)(const void __iomem *addr, unsigned offset); - void (*writel)(void __iomem *addr, unsigned offset, u32 data); void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf); void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf); struct dma_controller * @@ -188,9 +177,6 @@ struct musb_platform_ops { int (*vbus_status)(struct musb *musb); void (*set_vbus)(struct musb *musb, int on); - int (*adjust_channel_params)(struct dma_channel *channel, - u16 packet_sz, u8 *mode, - dma_addr_t *dma_addr, u32 *len); void (*pre_root_reset_end)(struct musb *musb); void (*post_root_reset_end)(struct musb *musb); int (*phy_callback)(enum musb_vbus_id_status status); @@ -359,7 +345,7 @@ struct musb { u8 min_power; /* vbus for periph, in mA/2 */ - int port_mode; /* MUSB_PORT_MODE_* */ + enum musb_mode port_mode; bool session; unsigned long quirk_retries; bool is_host; diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index d0dd4f470bbe..7fbb8a307145 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -614,7 +614,7 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel) } /* DA8xx Advisory 2.3.27: wait 250 ms before to start the teardown */ - if (musb->io.quirks & MUSB_DA8XX) + if (musb->ops->quirks & MUSB_DA8XX) mdelay(250); tdbit = 1 << cppi41_channel->port_num; @@ -773,7 +773,7 @@ cppi41_dma_controller_create(struct musb *musb, void __iomem *base) controller->controller.is_compatible = cppi41_is_compatible; controller->controller.musb = musb; - if (musb->io.quirks & MUSB_DA8XX) { + if (musb->ops->quirks & MUSB_DA8XX) { controller->tdown_reg = DA8XX_USB_TEARDOWN; controller->autoreq_reg = DA8XX_USB_AUTOREQ; controller->set_dma_mode = da8xx_set_dma_mode; diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h index 5e0f079dde21..c444a80fe1da 100644 --- a/drivers/usb/musb/musb_debug.h +++ b/drivers/usb/musb/musb_debug.h @@ -20,12 +20,11 @@ void musb_dbg(struct musb *musb, const char *fmt, ...); #ifdef CONFIG_DEBUG_FS -int musb_init_debugfs(struct musb *musb); +void musb_init_debugfs(struct musb *musb); void musb_exit_debugfs(struct musb *musb); #else -static inline int musb_init_debugfs(struct musb *musb) +static inline void musb_init_debugfs(struct musb *musb) { - return 0; } static inline void musb_exit_debugfs(struct musb *musb) { diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index e2050cac3eae..f42858e2b54c 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -321,48 +321,18 @@ static const struct file_operations musb_softconnect_fops = { .release = single_release, }; -int musb_init_debugfs(struct musb *musb) +void musb_init_debugfs(struct musb *musb) { - struct dentry *root; - struct dentry *file; - int ret; + struct dentry *root; root = debugfs_create_dir(dev_name(musb->controller), NULL); - if (!root) { - ret = -ENOMEM; - goto err0; - } - - file = debugfs_create_file("regdump", S_IRUGO, root, musb, - &musb_regdump_fops); - if (!file) { - ret = -ENOMEM; - goto err1; - } - - file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, - root, musb, &musb_test_mode_fops); - if (!file) { - ret = -ENOMEM; - goto err1; - } - - file = debugfs_create_file("softconnect", S_IRUGO | S_IWUSR, - root, musb, &musb_softconnect_fops); - if (!file) { - ret = -ENOMEM; - goto err1; - } - musb->debugfs_root = root; - return 0; - -err1: - debugfs_remove_recursive(root); - -err0: - return ret; + debugfs_create_file("regdump", S_IRUGO, root, musb, &musb_regdump_fops); + debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, musb, + &musb_test_mode_fops); + debugfs_create_file("softconnect", S_IRUGO | S_IWUSR, root, musb, + &musb_softconnect_fops); } void /* __init_or_exit */ musb_exit_debugfs(struct musb *musb) diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index 0fc8cd0c2a5c..8f60271c0a9d 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -44,31 +44,31 @@ struct musb_hw_ep; #endif #ifdef CONFIG_USB_UX500_DMA -#define musb_dma_ux500(musb) (musb->io.quirks & MUSB_DMA_UX500) +#define musb_dma_ux500(musb) (musb->ops->quirks & MUSB_DMA_UX500) #else #define musb_dma_ux500(musb) 0 #endif #ifdef CONFIG_USB_TI_CPPI41_DMA -#define musb_dma_cppi41(musb) (musb->io.quirks & MUSB_DMA_CPPI41) +#define musb_dma_cppi41(musb) (musb->ops->quirks & MUSB_DMA_CPPI41) #else #define musb_dma_cppi41(musb) 0 #endif #ifdef CONFIG_USB_TI_CPPI_DMA -#define musb_dma_cppi(musb) (musb->io.quirks & MUSB_DMA_CPPI) +#define musb_dma_cppi(musb) (musb->ops->quirks & MUSB_DMA_CPPI) #else #define musb_dma_cppi(musb) 0 #endif #ifdef CONFIG_USB_TUSB_OMAP_DMA -#define tusb_dma_omap(musb) (musb->io.quirks & MUSB_DMA_TUSB_OMAP) +#define tusb_dma_omap(musb) (musb->ops->quirks & MUSB_DMA_TUSB_OMAP) #else #define tusb_dma_omap(musb) 0 #endif #ifdef CONFIG_USB_INVENTRA_DMA -#define musb_dma_inventra(musb) (musb->io.quirks & MUSB_DMA_INVENTRA) +#define musb_dma_inventra(musb) (musb->ops->quirks & MUSB_DMA_INVENTRA) #else #define musb_dma_inventra(musb) 0 #endif diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 6a60bc0490c5..fb871eabcc10 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -183,7 +183,7 @@ static void dsps_musb_enable(struct musb *musb) musb_writel(reg_base, wrp->coreintr_set, coremask); /* start polling for ID change in dual-role idle mode */ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && - musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) + musb->port_mode == MUSB_OTG) dsps_mod_timer(glue, -1); } @@ -231,7 +231,7 @@ static int dsps_check_status(struct musb *musb, void *unused) break; case OTG_STATE_A_WAIT_BCON: /* keep VBUS on for host-only mode */ - if (musb->port_mode == MUSB_PORT_MODE_HOST) { + if (musb->port_mode == MUSB_HOST) { dsps_mod_timer_optional(glue); break; } @@ -360,13 +360,11 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); - musb->xceiv->otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; dsps_mod_timer_optional(glue); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); - musb->xceiv->otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; } @@ -401,24 +399,17 @@ out: static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue *glue) { struct dentry *root; - struct dentry *file; char buf[128]; sprintf(buf, "%s.dsps", dev_name(musb->controller)); root = debugfs_create_dir(buf, NULL); - if (!root) - return -ENOMEM; glue->dbgfs_root = root; glue->regset.regs = dsps_musb_regs; glue->regset.nregs = ARRAY_SIZE(dsps_musb_regs); glue->regset.base = musb->ctrl_base; - file = debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset); - if (!file) { - debugfs_remove_recursive(root); - return -ENOMEM; - } + debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset); return 0; } @@ -729,25 +720,6 @@ static int get_int_prop(struct device_node *dn, const char *s) return val; } -static int get_musb_port_mode(struct device *dev) -{ - enum usb_dr_mode mode; - - mode = usb_get_dr_mode(dev); - switch (mode) { - case USB_DR_MODE_HOST: - return MUSB_PORT_MODE_HOST; - - case USB_DR_MODE_PERIPHERAL: - return MUSB_PORT_MODE_GADGET; - - case USB_DR_MODE_UNKNOWN: - case USB_DR_MODE_OTG: - default: - return MUSB_PORT_MODE_DUAL_ROLE; - } -} - static int dsps_create_musb_pdev(struct dsps_glue *glue, struct platform_device *parent) { @@ -786,6 +758,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, musb->dev.parent = dev; musb->dev.dma_mask = &musb_dmamask; musb->dev.coherent_dma_mask = musb_dmamask; + device_set_of_node_from_dev(&musb->dev, &parent->dev); glue->musb = musb; @@ -807,7 +780,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, config->num_eps = get_int_prop(dn, "mentor,num-eps"); config->ram_bits = get_int_prop(dn, "mentor,ram-bits"); config->host_port_deassert_reset_at_resume = 1; - pdata.mode = get_musb_port_mode(dev); + pdata.mode = musb_get_mode(dev); /* DT keeps this entry in mA, musb expects it as per USB spec */ pdata.power = get_int_prop(dn, "mentor,power") / 2; @@ -1047,7 +1020,7 @@ static int dsps_resume(struct device *dev) musb_writel(mbase, wrp->tx_mode, glue->context.tx_mode); musb_writel(mbase, wrp->rx_mode, glue->context.rx_mode); if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && - musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) + musb->port_mode == MUSB_OTG) dsps_mod_timer(glue, -1); pm_runtime_put(dev); diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 71c5835ea9cd..eae8b1b1b45b 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1794,16 +1794,12 @@ int musb_gadget_setup(struct musb *musb) musb->g.speed = USB_SPEED_UNKNOWN; MUSB_DEV_MODE(musb); - musb->xceiv->otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; /* this "gadget" abstracts/virtualizes the controller */ musb->g.name = musb_driver_name; -#if IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE) - musb->g.is_otg = 1; -#elif IS_ENABLED(CONFIG_USB_MUSB_GADGET) + /* don't support otg protocols */ musb->g.is_otg = 0; -#endif INIT_DELAYED_WORK(&musb->gadget_work, musb_gadget_work); musb_g_init_endpoints(musb); @@ -1823,7 +1819,7 @@ err: void musb_gadget_cleanup(struct musb *musb) { - if (musb->port_mode == MUSB_PORT_MODE_HOST) + if (musb->port_mode == MUSB_HOST) return; cancel_delayed_work_sync(&musb->gadget_work); diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h index 9c34aca06db6..d02663660813 100644 --- a/drivers/usb/musb/musb_gadget.h +++ b/drivers/usb/musb/musb_gadget.h @@ -60,10 +60,7 @@ struct musb_request { enum buffer_map_state map_state; }; -static inline struct musb_request *to_musb_request(struct usb_request *req) -{ - return req ? container_of(req, struct musb_request, request) : NULL; -} +#define to_musb_request(r) container_of((r), struct musb_request, request) extern struct usb_request * musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags); @@ -99,10 +96,7 @@ struct musb_ep { u8 hb_mult; }; -static inline struct musb_ep *to_musb_ep(struct usb_ep *ep) -{ - return ep ? container_of(ep, struct musb_ep, end_point) : NULL; -} +#define to_musb_ep(ep) container_of((ep), struct musb_ep, end_point) static inline struct musb_request *next_request(struct musb_ep *ep) { diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 15a42cee0a9c..8000c7c02f79 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2735,7 +2735,7 @@ int musb_host_alloc(struct musb *musb) void musb_host_cleanup(struct musb *musb) { - if (musb->port_mode == MUSB_PORT_MODE_GADGET) + if (musb->port_mode == MUSB_PERIPHERAL) return; usb_remove_hcd(musb->hcd); } @@ -2750,13 +2750,13 @@ int musb_host_setup(struct musb *musb, int power_budget) int ret; struct usb_hcd *hcd = musb->hcd; - if (musb->port_mode == MUSB_PORT_MODE_HOST) { + if (musb->port_mode == MUSB_HOST) { MUSB_HST_MODE(musb); - musb->xceiv->otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_IDLE; } otg_set_host(musb->xceiv->otg, &hcd->self); - hcd->self.otg_port = 1; + /* don't support otg protocols */ + hcd->self.otg_port = 0; musb->xceiv->otg->host = &hcd->self; hcd->power_budget = 2 * (power_budget ? : 250); hcd->skip_phy_initialization = 1; diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h index b7025b2e6e00..8058a58092cf 100644 --- a/drivers/usb/musb/musb_io.h +++ b/drivers/usb/musb/musb_io.h @@ -16,7 +16,6 @@ /** * struct musb_io - IO functions for MUSB - * @quirks: platform specific flags * @ep_offset: platform specific function to get end point offset * @ep_select: platform specific function to select end point * @fifo_offset: platform specific function to get fifo offset @@ -25,7 +24,6 @@ * @busctl_offset: platform specific function to get busctl offset */ struct musb_io { - u32 quirks; u32 (*ep_offset)(u8 epnum, u16 offset); void (*ep_select)(void __iomem *mbase, u8 epnum); u32 (*fifo_offset)(u8 epnum); @@ -39,7 +37,7 @@ extern u8 (*musb_readb)(const void __iomem *addr, unsigned offset); extern void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data); extern u16 (*musb_readw)(const void __iomem *addr, unsigned offset); extern void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data); -extern u32 (*musb_readl)(const void __iomem *addr, unsigned offset); -extern void (*musb_writel)(void __iomem *addr, unsigned offset, u32 data); +extern u32 musb_readl(const void __iomem *addr, unsigned offset); +extern void musb_writel(void __iomem *addr, unsigned offset, u32 data); #endif diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 88466622c89f..5cd7264fc2cb 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -273,67 +273,12 @@ #define MUSB_RXHUBADDR 0x06 #define MUSB_RXHUBPORT 0x07 -static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size) -{ - musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); -} - -static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off) -{ - musb_writew(mbase, MUSB_TXFIFOADD, c_off); -} - -static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size) -{ - musb_writeb(mbase, MUSB_RXFIFOSZ, c_size); -} - -static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) -{ - musb_writew(mbase, MUSB_RXFIFOADD, c_off); -} - -static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val) -{ - musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val); -} - -static inline u8 musb_read_txfifosz(void __iomem *mbase) -{ - return musb_readb(mbase, MUSB_TXFIFOSZ); -} - -static inline u16 musb_read_txfifoadd(void __iomem *mbase) -{ - return musb_readw(mbase, MUSB_TXFIFOADD); -} - -static inline u8 musb_read_rxfifosz(void __iomem *mbase) -{ - return musb_readb(mbase, MUSB_RXFIFOSZ); -} - -static inline u16 musb_read_rxfifoadd(void __iomem *mbase) -{ - return musb_readw(mbase, MUSB_RXFIFOADD); -} - -static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase) -{ - return musb_readb(mbase, MUSB_ULPI_BUSCONTROL); -} - static inline u8 musb_read_configdata(void __iomem *mbase) { musb_writeb(mbase, MUSB_INDEX, 0); return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA); } -static inline u16 musb_read_hwvers(void __iomem *mbase) -{ - return musb_readw(mbase, MUSB_HWVERS); -} - static inline void musb_write_rxfunaddr(struct musb *musb, u8 epnum, u8 qh_addr_reg) { diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index 2f8dd9826e94..a84ec27c4c12 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -254,7 +254,7 @@ static int musb_has_gadget(struct musb *musb) #ifdef CONFIG_USB_MUSB_HOST return 1; #else - return musb->port_mode == MUSB_PORT_MODE_HOST; + return musb->port_mode == MUSB_HOST; #endif } diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 4389fc3422bd..a688f7f87829 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -10,7 +10,71 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include "musb_core.h" -#include "musbhsdma.h" + +#define MUSB_HSDMA_BASE 0x200 +#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) +#define MUSB_HSDMA_CONTROL 0x4 +#define MUSB_HSDMA_ADDRESS 0x8 +#define MUSB_HSDMA_COUNT 0xc + +#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \ + (MUSB_HSDMA_BASE + (_bchannel << 4) + _offset) + +#define musb_read_hsdma_addr(mbase, bchannel) \ + musb_readl(mbase, \ + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS)) + +#define musb_write_hsdma_addr(mbase, bchannel, addr) \ + musb_writel(mbase, \ + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), \ + addr) + +#define musb_read_hsdma_count(mbase, bchannel) \ + musb_readl(mbase, \ + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT)) + +#define musb_write_hsdma_count(mbase, bchannel, len) \ + musb_writel(mbase, \ + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \ + len) +/* control register (16-bit): */ +#define MUSB_HSDMA_ENABLE_SHIFT 0 +#define MUSB_HSDMA_TRANSMIT_SHIFT 1 +#define MUSB_HSDMA_MODE1_SHIFT 2 +#define MUSB_HSDMA_IRQENABLE_SHIFT 3 +#define MUSB_HSDMA_ENDPOINT_SHIFT 4 +#define MUSB_HSDMA_BUSERROR_SHIFT 8 +#define MUSB_HSDMA_BURSTMODE_SHIFT 9 +#define MUSB_HSDMA_BURSTMODE (3 << MUSB_HSDMA_BURSTMODE_SHIFT) +#define MUSB_HSDMA_BURSTMODE_UNSPEC 0 +#define MUSB_HSDMA_BURSTMODE_INCR4 1 +#define MUSB_HSDMA_BURSTMODE_INCR8 2 +#define MUSB_HSDMA_BURSTMODE_INCR16 3 + +#define MUSB_HSDMA_CHANNELS 8 + +struct musb_dma_controller; + +struct musb_dma_channel { + struct dma_channel channel; + struct musb_dma_controller *controller; + u32 start_addr; + u32 len; + u16 max_packet_sz; + u8 idx; + u8 epnum; + u8 transmit; +}; + +struct musb_dma_controller { + struct dma_controller controller; + struct musb_dma_channel channel[MUSB_HSDMA_CHANNELS]; + void *private_data; + void __iomem *base; + u8 channel_count; + u8 used_channels; + int irq; +}; static void dma_channel_release(struct dma_channel *channel); @@ -135,14 +199,6 @@ static int dma_channel_program(struct dma_channel *channel, BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || channel->status == MUSB_DMA_STATUS_BUSY); - /* Let targets check/tweak the arguments */ - if (musb->ops->adjust_channel_params) { - int ret = musb->ops->adjust_channel_params(channel, - packet_sz, &mode, &dma_addr, &len); - if (ret) - return ret; - } - /* * The DMA engine in RTL1.8 and above cannot handle * DMA addresses that are not aligned to a 4 byte boundary. diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h deleted file mode 100644 index 93665135aff1..000000000000 --- a/drivers/usb/musb/musbhsdma.h +++ /dev/null @@ -1,72 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * MUSB OTG driver - support for Mentor's DMA controller - * - * Copyright 2005 Mentor Graphics Corporation - * Copyright (C) 2005-2007 by Texas Instruments - */ - -#define MUSB_HSDMA_BASE 0x200 -#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) -#define MUSB_HSDMA_CONTROL 0x4 -#define MUSB_HSDMA_ADDRESS 0x8 -#define MUSB_HSDMA_COUNT 0xc - -#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \ - (MUSB_HSDMA_BASE + (_bchannel << 4) + _offset) - -#define musb_read_hsdma_addr(mbase, bchannel) \ - musb_readl(mbase, \ - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS)) - -#define musb_write_hsdma_addr(mbase, bchannel, addr) \ - musb_writel(mbase, \ - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), \ - addr) - -#define musb_read_hsdma_count(mbase, bchannel) \ - musb_readl(mbase, \ - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT)) - -#define musb_write_hsdma_count(mbase, bchannel, len) \ - musb_writel(mbase, \ - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \ - len) -/* control register (16-bit): */ -#define MUSB_HSDMA_ENABLE_SHIFT 0 -#define MUSB_HSDMA_TRANSMIT_SHIFT 1 -#define MUSB_HSDMA_MODE1_SHIFT 2 -#define MUSB_HSDMA_IRQENABLE_SHIFT 3 -#define MUSB_HSDMA_ENDPOINT_SHIFT 4 -#define MUSB_HSDMA_BUSERROR_SHIFT 8 -#define MUSB_HSDMA_BURSTMODE_SHIFT 9 -#define MUSB_HSDMA_BURSTMODE (3 << MUSB_HSDMA_BURSTMODE_SHIFT) -#define MUSB_HSDMA_BURSTMODE_UNSPEC 0 -#define MUSB_HSDMA_BURSTMODE_INCR4 1 -#define MUSB_HSDMA_BURSTMODE_INCR8 2 -#define MUSB_HSDMA_BURSTMODE_INCR16 3 - -#define MUSB_HSDMA_CHANNELS 8 - -struct musb_dma_controller; - -struct musb_dma_channel { - struct dma_channel channel; - struct musb_dma_controller *controller; - u32 start_addr; - u32 len; - u16 max_packet_sz; - u8 idx; - u8 epnum; - u8 transmit; -}; - -struct musb_dma_controller { - struct dma_controller controller; - struct musb_dma_channel channel[MUSB_HSDMA_CHANNELS]; - void *private_data; - void __iomem *base; - u8 channel_count; - u8 used_channels; - int irq; -}; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 5d705930ef47..b1dd81fb5f55 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -77,7 +77,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) otg_set_vbus(otg, 1); } else { musb->is_active = 1; - otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; devctl |= MUSB_DEVCTL_SESSION; MUSB_HST_MODE(musb); @@ -89,7 +88,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) * jumping right to B_IDLE... */ - otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; devctl &= ~MUSB_DEVCTL_SESSION; @@ -148,14 +146,12 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) struct musb_hdrc_platform_data *pdata = dev_get_platdata(musb->controller); struct omap_musb_board_data *data = pdata->board_data; - struct usb_otg *otg = musb->xceiv->otg; pm_runtime_get_sync(musb->controller); switch (glue->status) { case MUSB_ID_GROUND: dev_dbg(musb->controller, "ID GND\n"); - otg->default_a = true; musb->xceiv->otg->state = OTG_STATE_A_IDLE; musb->xceiv->last_event = USB_EVENT_ID; if (musb->gadget_driver) { @@ -168,7 +164,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) case MUSB_VBUS_VALID: dev_dbg(musb->controller, "VBUS Connect\n"); - otg->default_a = false; musb->xceiv->otg->state = OTG_STATE_B_IDLE; musb->xceiv->last_event = USB_EVENT_VBUS; omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); @@ -239,21 +234,15 @@ static int omap2430_musb_init(struct musb *musb) * up through ULPI. TWL4030-family PMICs include one, * which needs a driver, drivers aren't always needed. */ - if (dev->parent->of_node) { - musb->phy = devm_phy_get(dev->parent, "usb2-phy"); - - /* We can't totally remove musb->xceiv as of now because - * musb core uses xceiv.state and xceiv.otg. Once we have - * a separate state machine to handle otg, these can be moved - * out of xceiv and then we can start using the generic PHY - * framework - */ - musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, - "usb-phy", 0); - } else { - musb->xceiv = devm_usb_get_phy_dev(dev, 0); - musb->phy = devm_phy_get(dev, "usb"); - } + musb->phy = devm_phy_get(dev->parent, "usb2-phy"); + + /* We can't totally remove musb->xceiv as of now because + * musb core uses xceiv.state and xceiv.otg. Once we have + * a separate state machine to handle otg, these can be moved + * out of xceiv and then we can start using the generic PHY + * framework + */ + musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0); if (IS_ERR(musb->xceiv)) { status = PTR_ERR(musb->xceiv); @@ -391,8 +380,13 @@ static int omap2430_probe(struct platform_device *pdev) struct omap2430_glue *glue; struct device_node *np = pdev->dev.of_node; struct musb_hdrc_config *config; + struct device_node *control_node; + struct platform_device *control_pdev; int ret = -ENOMEM, val; + if (!np) + return -ENODEV; + glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) goto err0; @@ -412,47 +406,43 @@ static int omap2430_probe(struct platform_device *pdev) glue->status = MUSB_UNKNOWN; glue->control_otghs = ERR_PTR(-ENODEV); - if (np) { - struct device_node *control_node; - struct platform_device *control_pdev; + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + goto err2; - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - goto err2; + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + goto err2; - data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); - if (!data) - goto err2; + config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); + if (!config) + goto err2; - config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); - if (!config) + of_property_read_u32(np, "mode", (u32 *)&pdata->mode); + of_property_read_u32(np, "interface-type", + (u32 *)&data->interface_type); + of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); + of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); + of_property_read_u32(np, "power", (u32 *)&pdata->power); + + ret = of_property_read_u32(np, "multipoint", &val); + if (!ret && val) + config->multipoint = true; + + pdata->board_data = data; + pdata->config = config; + + control_node = of_parse_phandle(np, "ctrl-module", 0); + if (control_node) { + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + ret = -EINVAL; goto err2; - - of_property_read_u32(np, "mode", (u32 *)&pdata->mode); - of_property_read_u32(np, "interface-type", - (u32 *)&data->interface_type); - of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); - of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); - of_property_read_u32(np, "power", (u32 *)&pdata->power); - - ret = of_property_read_u32(np, "multipoint", &val); - if (!ret && val) - config->multipoint = true; - - pdata->board_data = data; - pdata->config = config; - - control_node = of_parse_phandle(np, "ctrl-module", 0); - if (control_node) { - control_pdev = of_find_device_by_node(control_node); - if (!control_pdev) { - dev_err(&pdev->dev, "Failed to get control device\n"); - ret = -EINVAL; - goto err2; - } - glue->control_otghs = &control_pdev->dev; } + glue->control_otghs = &control_pdev->dev; } + pdata->platform_ops = &omap2430_ops; platform_set_drvdata(pdev, glue); diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index 2d201219ecff..832a41f9ee7d 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -105,13 +105,11 @@ static void sunxi_musb_work(struct work_struct *work) devctl = readb(musb->mregs + SUNXI_MUSB_DEVCTL); if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) { set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); - musb->xceiv->otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; MUSB_HST_MODE(musb); devctl |= MUSB_DEVCTL_SESSION; } else { clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); - musb->xceiv->otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; MUSB_DEV_MODE(musb); devctl &= ~MUSB_DEVCTL_SESSION; @@ -347,7 +345,7 @@ static int sunxi_musb_set_mode(struct musb *musb, u8 mode) if (glue->phy_mode == new_mode) return 0; - if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE) { + if (musb->port_mode != MUSB_OTG) { dev_err(musb->controller->parent, "Error changing modes is only supported in dual role mode\n"); return -EINVAL; @@ -651,10 +649,8 @@ static const struct musb_hdrc_config sunxi_musb_hdrc_config = { .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg), .multipoint = true, .dyn_fifo = true, - .soft_con = true, .num_eps = SUNXI_MUSB_MAX_EP_NUM, .ram_bits = SUNXI_MUSB_RAM_BITS, - .dma = 0, }; static struct musb_hdrc_config sunxi_musb_hdrc_config_h3 = { @@ -662,10 +658,8 @@ static struct musb_hdrc_config sunxi_musb_hdrc_config_h3 = { .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg_h3), .multipoint = true, .dyn_fifo = true, - .soft_con = true, .num_eps = SUNXI_MUSB_MAX_EP_NUM_H3, .ram_bits = SUNXI_MUSB_RAM_BITS, - .dma = 0, }; @@ -690,19 +684,19 @@ static int sunxi_musb_probe(struct platform_device *pdev) switch (usb_get_dr_mode(&pdev->dev)) { #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST case USB_DR_MODE_HOST: - pdata.mode = MUSB_PORT_MODE_HOST; + pdata.mode = MUSB_HOST; glue->phy_mode = PHY_MODE_USB_HOST; break; #endif #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET case USB_DR_MODE_PERIPHERAL: - pdata.mode = MUSB_PORT_MODE_GADGET; + pdata.mode = MUSB_PERIPHERAL; glue->phy_mode = PHY_MODE_USB_DEVICE; break; #endif #ifdef CONFIG_USB_MUSB_DUAL_ROLE case USB_DR_MODE_OTG: - pdata.mode = MUSB_PORT_MODE_DUAL_ROLE; + pdata.mode = MUSB_OTG; glue->phy_mode = PHY_MODE_USB_OTG; break; #endif diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index 27b4a77a9e23..73538d1d0524 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -62,7 +62,6 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on) } else { musb->is_active = 1; - musb->xceiv->otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; devctl |= MUSB_DEVCTL_SESSION; MUSB_HST_MODE(musb); @@ -73,7 +72,6 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on) /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and jumping * right to B_IDLE... */ - musb->xceiv->otg->default_a = 0; devctl &= ~MUSB_DEVCTL_SESSION; MUSB_DEV_MODE(musb); } diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 0f8ab981d572..d7312eed6088 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -159,6 +159,16 @@ config USB_MXS_PHY MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. +config USB_TEGRA_PHY + tristate "NVIDIA Tegra USB PHY Driver" + depends on ARCH_TEGRA + select USB_COMMON + select USB_PHY + select USB_ULPI + help + This driver provides PHY support for the USB controllers found + on NVIDIA Tegra SoC's. + config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM || ARM64 diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 25e579fb92b8..df1d99010079 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o -obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o +obj-$(CONFIG_USB_TEGRA_PHY) += phy-tegra-usb.o obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c index b36fa8b953d0..27bdb7222527 100644 --- a/drivers/usb/phy/phy-am335x.c +++ b/drivers/usb/phy/phy-am335x.c @@ -96,8 +96,7 @@ static int am335x_phy_remove(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int am335x_phy_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct am335x_phy *am_phy = platform_get_drvdata(pdev); + struct am335x_phy *am_phy = dev_get_drvdata(dev); /* * Enable phy wakeup only if dev->power.can_wakeup is true. @@ -117,8 +116,7 @@ static int am335x_phy_suspend(struct device *dev) static int am335x_phy_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct am335x_phy *am_phy = platform_get_drvdata(pdev); + struct am335x_phy *am_phy = dev_get_drvdata(dev); phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, true); diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index 0e8d23e51732..ea7ef1dc0b42 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -236,13 +236,83 @@ static void set_phcd(struct tegra_usb_phy *phy, bool enable) static int utmip_pad_open(struct tegra_usb_phy *phy) { + int ret; + phy->pad_clk = devm_clk_get(phy->u_phy.dev, "utmi-pads"); if (IS_ERR(phy->pad_clk)) { - pr_err("%s: can't get utmip pad clock\n", __func__); - return PTR_ERR(phy->pad_clk); + ret = PTR_ERR(phy->pad_clk); + dev_err(phy->u_phy.dev, + "Failed to get UTMIP pad clock: %d\n", ret); + return ret; } - return 0; + phy->pad_rst = devm_reset_control_get_optional_shared( + phy->u_phy.dev, "utmi-pads"); + if (IS_ERR(phy->pad_rst)) { + ret = PTR_ERR(phy->pad_rst); + dev_err(phy->u_phy.dev, + "Failed to get UTMI-pads reset: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(phy->pad_clk); + if (ret) { + dev_err(phy->u_phy.dev, + "Failed to enable UTMI-pads clock: %d\n", ret); + return ret; + } + + spin_lock(&utmip_pad_lock); + + ret = reset_control_deassert(phy->pad_rst); + if (ret) { + dev_err(phy->u_phy.dev, + "Failed to initialize UTMI-pads reset: %d\n", ret); + goto unlock; + } + + ret = reset_control_assert(phy->pad_rst); + if (ret) { + dev_err(phy->u_phy.dev, + "Failed to assert UTMI-pads reset: %d\n", ret); + goto unlock; + } + + udelay(1); + + ret = reset_control_deassert(phy->pad_rst); + if (ret) + dev_err(phy->u_phy.dev, + "Failed to deassert UTMI-pads reset: %d\n", ret); +unlock: + spin_unlock(&utmip_pad_lock); + + clk_disable_unprepare(phy->pad_clk); + + return ret; +} + +static int utmip_pad_close(struct tegra_usb_phy *phy) +{ + int ret; + + ret = clk_prepare_enable(phy->pad_clk); + if (ret) { + dev_err(phy->u_phy.dev, + "Failed to enable UTMI-pads clock: %d\n", ret); + return ret; + } + + ret = reset_control_assert(phy->pad_rst); + if (ret) + dev_err(phy->u_phy.dev, + "Failed to assert UTMI-pads reset: %d\n", ret); + + udelay(1); + + clk_disable_unprepare(phy->pad_clk); + + return ret; } static void utmip_pad_power_on(struct tegra_usb_phy *phy) @@ -282,7 +352,7 @@ static int utmip_pad_power_off(struct tegra_usb_phy *phy) void __iomem *base = phy->pad_regs; if (!utmip_pad_count) { - pr_err("%s: utmip pad already powered off\n", __func__); + dev_err(phy->u_phy.dev, "UTMIP pad already powered off\n"); return -EINVAL; } @@ -338,7 +408,8 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) set_phcd(phy, true); if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) - pr_err("%s: timeout waiting for phy to stabilize\n", __func__); + dev_err(phy->u_phy.dev, + "Timeout waiting for PHY to stabilize on disable\n"); } static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) @@ -370,7 +441,8 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, USB_PHY_CLK_VALID)) - pr_err("%s: timeout waiting for phy to stabilize\n", __func__); + dev_err(phy->u_phy.dev, + "Timeout waiting for PHY to stabilize on enable\n"); } static int utmi_phy_power_on(struct tegra_usb_phy *phy) @@ -617,15 +689,15 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) ret = gpio_direction_output(phy->reset_gpio, 0); if (ret < 0) { - dev_err(phy->u_phy.dev, "gpio %d not set to 0\n", - phy->reset_gpio); + dev_err(phy->u_phy.dev, "GPIO %d not set to 0: %d\n", + phy->reset_gpio, ret); return ret; } msleep(5); ret = gpio_direction_output(phy->reset_gpio, 1); if (ret < 0) { - dev_err(phy->u_phy.dev, "gpio %d not set to 1\n", - phy->reset_gpio); + dev_err(phy->u_phy.dev, "GPIO %d not set to 1: %d\n", + phy->reset_gpio, ret); return ret; } @@ -661,13 +733,13 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) /* Fix VbusInvalid due to floating VBUS */ ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); if (ret) { - pr_err("%s: ulpi write failed\n", __func__); + dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", ret); return ret; } ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); if (ret) { - pr_err("%s: ulpi write failed\n", __func__); + dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", ret); return ret; } @@ -694,6 +766,9 @@ static void tegra_usb_phy_close(struct tegra_usb_phy *phy) if (!IS_ERR(phy->vbus)) regulator_disable(phy->vbus); + if (!phy->is_ulpi_phy) + utmip_pad_close(phy); + clk_disable_unprepare(phy->pll_u); } @@ -728,28 +803,30 @@ static int ulpi_open(struct tegra_usb_phy *phy) phy->clk = devm_clk_get(phy->u_phy.dev, "ulpi-link"); if (IS_ERR(phy->clk)) { - pr_err("%s: can't get ulpi clock\n", __func__); - return PTR_ERR(phy->clk); + err = PTR_ERR(phy->clk); + dev_err(phy->u_phy.dev, "Failed to get ULPI clock: %d\n", err); + return err; } err = devm_gpio_request(phy->u_phy.dev, phy->reset_gpio, "ulpi_phy_reset_b"); if (err < 0) { - dev_err(phy->u_phy.dev, "request failed for gpio: %d\n", - phy->reset_gpio); + dev_err(phy->u_phy.dev, "Request failed for GPIO %d: %d\n", + phy->reset_gpio, err); return err; } err = gpio_direction_output(phy->reset_gpio, 0); if (err < 0) { - dev_err(phy->u_phy.dev, "gpio %d direction not set to output\n", - phy->reset_gpio); + dev_err(phy->u_phy.dev, + "GPIO %d direction not set to output: %d\n", + phy->reset_gpio, err); return err; } phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); if (!phy->ulpi) { - dev_err(phy->u_phy.dev, "otg_ulpi_create returned NULL\n"); + dev_err(phy->u_phy.dev, "Failed to create ULPI OTG\n"); err = -ENOMEM; return err; } @@ -766,8 +843,10 @@ static int tegra_usb_phy_init(struct tegra_usb_phy *phy) phy->pll_u = devm_clk_get(phy->u_phy.dev, "pll_u"); if (IS_ERR(phy->pll_u)) { - pr_err("Can't get pll_u clock\n"); - return PTR_ERR(phy->pll_u); + err = PTR_ERR(phy->pll_u); + dev_err(phy->u_phy.dev, + "Failed to get pll_u clock: %d\n", err); + return err; } err = clk_prepare_enable(phy->pll_u); @@ -782,7 +861,8 @@ static int tegra_usb_phy_init(struct tegra_usb_phy *phy) } } if (!phy->freq) { - pr_err("invalid pll_u parent rate %ld\n", parent_rate); + dev_err(phy->u_phy.dev, "Invalid pll_u parent rate %ld\n", + parent_rate); err = -EINVAL; goto fail; } @@ -791,7 +871,7 @@ static int tegra_usb_phy_init(struct tegra_usb_phy *phy) err = regulator_enable(phy->vbus); if (err) { dev_err(phy->u_phy.dev, - "failed to enable usb vbus regulator: %d\n", + "Failed to enable USB VBUS regulator: %d\n", err); goto fail; } @@ -855,7 +935,8 @@ static int read_utmi_param(struct platform_device *pdev, const char *param, int err = of_property_read_u32(pdev->dev.of_node, param, &value); *dest = (u8)value; if (err < 0) - dev_err(&pdev->dev, "Failed to read USB UTMI parameter %s: %d\n", + dev_err(&pdev->dev, + "Failed to read USB UTMI parameter %s: %d\n", param, err); return err; } @@ -871,14 +952,14 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!res) { - dev_err(&pdev->dev, "Failed to get UTMI Pad regs\n"); + dev_err(&pdev->dev, "Failed to get UTMI pad regs\n"); return -ENXIO; } tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!tegra_phy->pad_regs) { - dev_err(&pdev->dev, "Failed to remap UTMI Pad regs\n"); + dev_err(&pdev->dev, "Failed to remap UTMI pad regs\n"); return -ENOMEM; } @@ -1020,15 +1101,16 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) tegra_phy->reset_gpio = of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0); if (!gpio_is_valid(tegra_phy->reset_gpio)) { - dev_err(&pdev->dev, "invalid gpio: %d\n", - tegra_phy->reset_gpio); + dev_err(&pdev->dev, + "Invalid GPIO: %d\n", tegra_phy->reset_gpio); return tegra_phy->reset_gpio; } tegra_phy->config = NULL; break; default: - dev_err(&pdev->dev, "phy_type is invalid or unsupported\n"); + dev_err(&pdev->dev, "phy_type %u is invalid or unsupported\n", + phy_type); return -EINVAL; } diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index bceb2c9988dd..0277f62739a2 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -27,7 +27,6 @@ #define DEFAULT_ACA_CUR_MAX 5000 static LIST_HEAD(phy_list); -static LIST_HEAD(phy_bind_list); static DEFINE_SPINLOCK(phy_lock); struct phy_devm { @@ -50,24 +49,6 @@ static struct usb_phy *__usb_find_phy(struct list_head *list, return ERR_PTR(-ENODEV); } -static struct usb_phy *__usb_find_phy_dev(struct device *dev, - struct list_head *list, u8 index) -{ - struct usb_phy_bind *phy_bind = NULL; - - list_for_each_entry(phy_bind, list, list) { - if (!(strcmp(phy_bind->dev_name, dev_name(dev))) && - phy_bind->index == index) { - if (phy_bind->phy) - return phy_bind->phy; - else - return ERR_PTR(-EPROBE_DEFER); - } - } - - return ERR_PTR(-ENODEV); -} - static struct usb_phy *__of_usb_find_phy(struct device_node *node) { struct usb_phy *phy; @@ -585,72 +566,6 @@ struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_phandle); /** - * usb_get_phy_dev - find the USB PHY - * @dev - device that requests this phy - * @index - the index of the phy - * - * Returns the phy driver, after getting a refcount to it; or - * -ENODEV if there is no such phy. The caller is responsible for - * calling usb_put_phy() to release that count. - * - * For use by USB host and peripheral drivers. - */ -struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index) -{ - struct usb_phy *phy = NULL; - unsigned long flags; - - spin_lock_irqsave(&phy_lock, flags); - - phy = __usb_find_phy_dev(dev, &phy_bind_list, index); - if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { - dev_dbg(dev, "unable to find transceiver\n"); - if (!IS_ERR(phy)) - phy = ERR_PTR(-ENODEV); - - goto err0; - } - - get_device(phy->dev); - -err0: - spin_unlock_irqrestore(&phy_lock, flags); - - return phy; -} -EXPORT_SYMBOL_GPL(usb_get_phy_dev); - -/** - * devm_usb_get_phy_dev - find the USB PHY using device ptr and index - * @dev - device that requests this phy - * @index - the index of the phy - * - * Gets the phy using usb_get_phy_dev(), and associates a device with it using - * devres. On driver detach, release function is invoked on the devres data, - * then, devres data is freed. - * - * For use by USB host and peripheral drivers. - */ -struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index) -{ - struct usb_phy **ptr, *phy; - - ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL); - if (!ptr) - return NULL; - - phy = usb_get_phy_dev(dev, index); - if (!IS_ERR(phy)) { - *ptr = phy; - devres_add(dev, ptr); - } else - devres_free(ptr); - - return phy; -} -EXPORT_SYMBOL_GPL(devm_usb_get_phy_dev); - -/** * devm_usb_put_phy - release the USB PHY * @dev - device that wants to release this phy * @phy - the phy returned by devm_usb_get_phy() @@ -745,7 +660,6 @@ EXPORT_SYMBOL_GPL(usb_add_phy); */ int usb_add_phy_dev(struct usb_phy *x) { - struct usb_phy_bind *phy_bind; unsigned long flags; int ret; @@ -762,13 +676,9 @@ int usb_add_phy_dev(struct usb_phy *x) ATOMIC_INIT_NOTIFIER_HEAD(&x->notifier); spin_lock_irqsave(&phy_lock, flags); - list_for_each_entry(phy_bind, &phy_bind_list, list) - if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev)))) - phy_bind->phy = x; - list_add_tail(&x->head, &phy_list); - spin_unlock_irqrestore(&phy_lock, flags); + return 0; } EXPORT_SYMBOL_GPL(usb_add_phy_dev); @@ -782,54 +692,15 @@ EXPORT_SYMBOL_GPL(usb_add_phy_dev); void usb_remove_phy(struct usb_phy *x) { unsigned long flags; - struct usb_phy_bind *phy_bind; spin_lock_irqsave(&phy_lock, flags); - if (x) { - list_for_each_entry(phy_bind, &phy_bind_list, list) - if (phy_bind->phy == x) - phy_bind->phy = NULL; + if (x) list_del(&x->head); - } spin_unlock_irqrestore(&phy_lock, flags); } EXPORT_SYMBOL_GPL(usb_remove_phy); /** - * usb_bind_phy - bind the phy and the controller that uses the phy - * @dev_name: the device name of the device that will bind to the phy - * @index: index to specify the port number - * @phy_dev_name: the device name of the phy - * - * Fills the phy_bind structure with the dev_name and phy_dev_name. This will - * be used when the phy driver registers the phy and when the controller - * requests this phy. - * - * To be used by platform specific initialization code. - */ -int usb_bind_phy(const char *dev_name, u8 index, - const char *phy_dev_name) -{ - struct usb_phy_bind *phy_bind; - unsigned long flags; - - phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL); - if (!phy_bind) - return -ENOMEM; - - phy_bind->dev_name = dev_name; - phy_bind->phy_dev_name = phy_dev_name; - phy_bind->index = index; - - spin_lock_irqsave(&phy_lock, flags); - list_add_tail(&phy_bind->list, &phy_bind_list); - spin_unlock_irqrestore(&phy_lock, flags); - - return 0; -} -EXPORT_SYMBOL_GPL(usb_bind_phy); - -/** * usb_phy_set_event - set event to phy event * @x: the phy returned by usb_get_phy(); * diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index f619afeae2b8..6137f7942c05 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -276,7 +276,6 @@ struct usbhs_priv { */ struct usbhs_fifo_info fifo_info; - struct usb_phy *usb_phy; struct phy *phy; }; diff --git a/drivers/usb/renesas_usbhs/rcar2.c b/drivers/usb/renesas_usbhs/rcar2.c index 85a0e0933917..0027092b1118 100644 --- a/drivers/usb/renesas_usbhs/rcar2.c +++ b/drivers/usb/renesas_usbhs/rcar2.c @@ -8,7 +8,6 @@ #include <linux/gpio.h> #include <linux/of_gpio.h> #include <linux/phy/phy.h> -#include <linux/usb/phy.h> #include "common.h" #include "rcar2.h" @@ -26,16 +25,6 @@ static int usbhs_rcar2_hardware_init(struct platform_device *pdev) return 0; } - if (IS_ENABLED(CONFIG_USB_PHY)) { - struct usb_phy *usb_phy = usb_get_phy_dev(&pdev->dev, 0); - - if (IS_ERR(usb_phy)) - return PTR_ERR(usb_phy); - - priv->usb_phy = usb_phy; - return 0; - } - return -ENXIO; } @@ -48,11 +37,6 @@ static int usbhs_rcar2_hardware_exit(struct platform_device *pdev) priv->phy = NULL; } - if (priv->usb_phy) { - usb_put_phy(priv->usb_phy); - priv->usb_phy = NULL; - } - return 0; } @@ -75,19 +59,6 @@ static int usbhs_rcar2_power_ctrl(struct platform_device *pdev, } } - if (priv->usb_phy) { - if (enable) { - retval = usb_phy_init(priv->usb_phy); - - if (!retval) - retval = usb_phy_set_suspend(priv->usb_phy, 0); - } else { - usb_phy_set_suspend(priv->usb_phy, 1); - usb_phy_shutdown(priv->usb_phy); - retval = 0; - } - } - return retval; } diff --git a/drivers/usb/roles/intel-xhci-usb-role-switch.c b/drivers/usb/roles/intel-xhci-usb-role-switch.c index de72eedb762e..1fb3dd0f1dfa 100644 --- a/drivers/usb/roles/intel-xhci-usb-role-switch.c +++ b/drivers/usb/roles/intel-xhci-usb-role-switch.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/usb/role.h> /* register definition */ @@ -38,20 +39,6 @@ struct intel_xhci_usb_data { void __iomem *base; }; -struct intel_xhci_acpi_match { - const char *hid; - int hrv; -}; - -/* - * ACPI IDs for PMICs which do not support separate data and power role - * detection (USB ACA detection for micro USB OTG), we allow userspace to - * change the role manually on these. - */ -static const struct intel_xhci_acpi_match allow_userspace_ctrl_ids[] = { - { "INT33F4", 3 }, /* X-Powers AXP288 PMIC */ -}; - static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role) { struct intel_xhci_usb_data *data = dev_get_drvdata(dev); @@ -70,6 +57,8 @@ static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role) return -EIO; } + pm_runtime_get_sync(dev); + /* Set idpin value as requested */ val = readl(data->base + DUAL_ROLE_CFG0); switch (role) { @@ -98,13 +87,17 @@ static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role) /* Polling on CFG1 register to confirm mode switch.*/ do { val = readl(data->base + DUAL_ROLE_CFG1); - if (!!(val & HOST_MODE) == (role == USB_ROLE_HOST)) + if (!!(val & HOST_MODE) == (role == USB_ROLE_HOST)) { + pm_runtime_put(dev); return 0; + } /* Interval for polling is set to about 5 - 10 ms */ usleep_range(5000, 10000); } while (time_before(jiffies, timeout)); + pm_runtime_put(dev); + dev_warn(dev, "Timeout waiting for role-switch\n"); return -ETIMEDOUT; } @@ -115,7 +108,9 @@ static enum usb_role intel_xhci_usb_get_role(struct device *dev) enum usb_role role; u32 val; + pm_runtime_get_sync(dev); val = readl(data->base + DUAL_ROLE_CFG0); + pm_runtime_put(dev); if (!(val & SW_IDPIN)) role = USB_ROLE_HOST; @@ -127,9 +122,10 @@ static enum usb_role intel_xhci_usb_get_role(struct device *dev) return role; } -static struct usb_role_switch_desc sw_desc = { +static const struct usb_role_switch_desc sw_desc = { .set = intel_xhci_usb_set_role, .get = intel_xhci_usb_get_role, + .allow_userspace_control = true, }; static int intel_xhci_usb_probe(struct platform_device *pdev) @@ -137,28 +133,27 @@ static int intel_xhci_usb_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct intel_xhci_usb_data *data; struct resource *res; - int i; data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; data->base = devm_ioremap_nocache(dev, res->start, resource_size(res)); if (!data->base) return -ENOMEM; - for (i = 0; i < ARRAY_SIZE(allow_userspace_ctrl_ids); i++) - if (acpi_dev_present(allow_userspace_ctrl_ids[i].hid, "1", - allow_userspace_ctrl_ids[i].hrv)) - sw_desc.allow_userspace_control = true; - platform_set_drvdata(pdev, data); data->role_sw = usb_role_switch_register(dev, &sw_desc); if (IS_ERR(data->role_sw)) return PTR_ERR(data->role_sw); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + return 0; } diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 9e265eb92611..eb0195cf37dd 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -60,7 +60,8 @@ static int usb_serial_device_probe(struct device *dev) } minor = port->minor; - tty_dev = tty_register_device(usb_serial_tty_driver, minor, dev); + tty_dev = tty_port_register_device(&port->port, usb_serial_tty_driver, + minor, dev); if (IS_ERR(tty_dev)) { retval = PTR_ERR(tty_dev); goto err_port_remove; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7ea221d42dba..b5cef322826f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -54,15 +54,14 @@ struct ftdi_private { int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */ - __u16 last_set_data_urb_value ; - /* the last data state set - needed for doing - * a break - */ + u16 last_set_data_value; /* the last data state set - needed for doing + * a break + */ int flags; /* some ASYNC_xxxx flags are supported */ unsigned long last_dtr_rts; /* saved modem control outputs */ char prev_status; /* Used for TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ - __u16 interface; /* FT2232C, FT2232H or FT4232H port interface + u16 interface; /* FT2232C, FT2232H or FT4232H port interface (0 for FT232/245) */ speed_t force_baud; /* if non-zero, force the baud rate to @@ -1063,10 +1062,10 @@ static int ftdi_get_modem_status(struct usb_serial_port *port, static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); static unsigned short int ftdi_232am_baud_to_divisor(int baud); -static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base); -static __u32 ftdi_232bm_baud_to_divisor(int baud); -static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base); -static __u32 ftdi_2232h_baud_to_divisor(int baud); +static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base); +static u32 ftdi_232bm_baud_to_divisor(int baud); +static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base); +static u32 ftdi_2232h_baud_to_divisor(int baud); static struct usb_serial_driver ftdi_sio_device = { .driver = { @@ -1136,14 +1135,14 @@ static unsigned short int ftdi_232am_baud_to_divisor(int baud) return ftdi_232am_baud_base_to_divisor(baud, 48000000); } -static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) +static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) { static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; - __u32 divisor; + u32 divisor; /* divisor shifted 3 bits to the left */ int divisor3 = base / 2 / baud; divisor = divisor3 >> 3; - divisor |= (__u32)divfrac[divisor3 & 0x7] << 14; + divisor |= (u32)divfrac[divisor3 & 0x7] << 14; /* Deal with special cases for highest baud rates. */ if (divisor == 1) divisor = 0; @@ -1152,22 +1151,22 @@ static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) return divisor; } -static __u32 ftdi_232bm_baud_to_divisor(int baud) +static u32 ftdi_232bm_baud_to_divisor(int baud) { return ftdi_232bm_baud_base_to_divisor(baud, 48000000); } -static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) +static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) { static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; - __u32 divisor; + u32 divisor; int divisor3; /* hi-speed baud rate is 10-bit sampling instead of 16-bit */ divisor3 = base * 8 / (baud * 10); divisor = divisor3 >> 3; - divisor |= (__u32)divfrac[divisor3 & 0x7] << 14; + divisor |= (u32)divfrac[divisor3 & 0x7] << 14; /* Deal with special cases for highest baud rates. */ if (divisor == 1) divisor = 0; @@ -1182,7 +1181,7 @@ static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) return divisor; } -static __u32 ftdi_2232h_baud_to_divisor(int baud) +static u32 ftdi_2232h_baud_to_divisor(int baud) { return ftdi_2232h_baud_base_to_divisor(baud, 120000000); } @@ -1195,7 +1194,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, { struct ftdi_private *priv = usb_get_serial_port_data(port); struct device *dev = &port->dev; - unsigned urb_value; + unsigned value; int rv; if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { @@ -1204,20 +1203,20 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, } clear &= ~set; /* 'set' takes precedence over 'clear' */ - urb_value = 0; + value = 0; if (clear & TIOCM_DTR) - urb_value |= FTDI_SIO_SET_DTR_LOW; + value |= FTDI_SIO_SET_DTR_LOW; if (clear & TIOCM_RTS) - urb_value |= FTDI_SIO_SET_RTS_LOW; + value |= FTDI_SIO_SET_RTS_LOW; if (set & TIOCM_DTR) - urb_value |= FTDI_SIO_SET_DTR_HIGH; + value |= FTDI_SIO_SET_DTR_HIGH; if (set & TIOCM_RTS) - urb_value |= FTDI_SIO_SET_RTS_HIGH; + value |= FTDI_SIO_SET_RTS_HIGH; rv = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_MODEM_CTRL_REQUEST, FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, - urb_value, priv->interface, + value, priv->interface, NULL, 0, WDR_TIMEOUT); if (rv < 0) { dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n", @@ -1236,12 +1235,12 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, } -static __u32 get_ftdi_divisor(struct tty_struct *tty, +static u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); struct device *dev = &port->dev; - __u32 div_value = 0; + u32 div_value = 0; int div_okay = 1; int baud; @@ -1299,7 +1298,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, case FT232RL: /* FT232RL chip */ case FTX: /* FT-X series */ if (baud <= 3000000) { - __u16 product_id = le16_to_cpu( + u16 product_id = le16_to_cpu( port->serial->dev->descriptor.idProduct); if (((product_id == FTDI_NDI_HUC_PID) || (product_id == FTDI_NDI_SPECTRA_SCU_PID) || @@ -1346,26 +1345,26 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - __u16 urb_value; - __u16 urb_index; - __u32 urb_index_value; + u16 value; + u16 index; + u32 index_value; int rv; - urb_index_value = get_ftdi_divisor(tty, port); - urb_value = (__u16)urb_index_value; - urb_index = (__u16)(urb_index_value >> 16); + index_value = get_ftdi_divisor(tty, port); + value = (u16)index_value; + index = (u16)(index_value >> 16); if ((priv->chip_type == FT2232C) || (priv->chip_type == FT2232H) || (priv->chip_type == FT4232H) || (priv->chip_type == FT232H)) { /* Probably the BM type needs the MSB of the encoded fractional * divider also moved like for the chips above. Any infos? */ - urb_index = (__u16)((urb_index << 8) | priv->interface); + index = (u16)((index << 8) | priv->interface); } rv = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_BAUDRATE_REQUEST, FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, - urb_value, urb_index, + value, index, NULL, 0, WDR_SHORT_TIMEOUT); return rv; } @@ -2140,29 +2139,29 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); - __u16 urb_value; + u16 value; /* break_state = -1 to turn on break, and 0 to turn off break */ /* see drivers/char/tty_io.c to see it used */ - /* last_set_data_urb_value NEVER has the break bit set in it */ + /* last_set_data_value NEVER has the break bit set in it */ if (break_state) - urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK; + value = priv->last_set_data_value | FTDI_SIO_SET_BREAK; else - urb_value = priv->last_set_data_urb_value; + value = priv->last_set_data_value; if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, - urb_value , priv->interface, + value , priv->interface, NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "%s FAILED to enable/disable break state (state was %d)\n", __func__, break_state); } dev_dbg(&port->dev, "%s break state is %d - urb is %d\n", __func__, - break_state, urb_value); + break_state, value); } @@ -2192,12 +2191,8 @@ static void ftdi_set_termios(struct tty_struct *tty, struct ftdi_private *priv = usb_get_serial_port_data(port); struct ktermios *termios = &tty->termios; unsigned int cflag = termios->c_cflag; - __u16 urb_value; /* will hold the new flags */ - - /* Added for xon/xoff support */ - unsigned int iflag = termios->c_iflag; - unsigned char vstop; - unsigned char vstart; + u16 value, index; + int ret; /* Force baud rate if this device requires it, unless it is set to B0. */ @@ -2258,44 +2253,44 @@ static void ftdi_set_termios(struct tty_struct *tty, no_skip: /* Set number of data bits, parity, stop bits */ - urb_value = 0; - urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : - FTDI_SIO_SET_DATA_STOP_BITS_1); + value = 0; + value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : + FTDI_SIO_SET_DATA_STOP_BITS_1); if (cflag & PARENB) { if (cflag & CMSPAR) - urb_value |= cflag & PARODD ? - FTDI_SIO_SET_DATA_PARITY_MARK : - FTDI_SIO_SET_DATA_PARITY_SPACE; + value |= cflag & PARODD ? + FTDI_SIO_SET_DATA_PARITY_MARK : + FTDI_SIO_SET_DATA_PARITY_SPACE; else - urb_value |= cflag & PARODD ? - FTDI_SIO_SET_DATA_PARITY_ODD : - FTDI_SIO_SET_DATA_PARITY_EVEN; + value |= cflag & PARODD ? + FTDI_SIO_SET_DATA_PARITY_ODD : + FTDI_SIO_SET_DATA_PARITY_EVEN; } else { - urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE; + value |= FTDI_SIO_SET_DATA_PARITY_NONE; } switch (cflag & CSIZE) { case CS5: dev_dbg(ddev, "Setting CS5 quirk\n"); break; case CS7: - urb_value |= 7; + value |= 7; dev_dbg(ddev, "Setting CS7\n"); break; default: case CS8: - urb_value |= 8; + value |= 8; dev_dbg(ddev, "Setting CS8\n"); break; } /* This is needed by the break command since it uses the same command - but is or'ed with this value */ - priv->last_set_data_urb_value = urb_value; + priv->last_set_data_value = value; if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, - urb_value , priv->interface, + value , priv->interface, NULL, 0, WDR_SHORT_TIMEOUT) < 0) { dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n", __func__); @@ -2326,65 +2321,30 @@ no_data_parity_stop_changes: set_mctrl(port, TIOCM_DTR | TIOCM_RTS); } - /* Set flow control */ - /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ no_c_cflag_changes: - if (cflag & CRTSCTS) { - dev_dbg(ddev, "%s Setting to CRTSCTS flow control\n", __func__); - if (usb_control_msg(dev, - usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, - FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), - NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(ddev, "urb failed to set to rts/cts flow control\n"); - } + /* Set hardware-assisted flow control */ + value = 0; + + if (C_CRTSCTS(tty)) { + dev_dbg(&port->dev, "enabling rts/cts flow control\n"); + index = FTDI_SIO_RTS_CTS_HS; + } else if (I_IXON(tty)) { + dev_dbg(&port->dev, "enabling xon/xoff flow control\n"); + index = FTDI_SIO_XON_XOFF_HS; + value = STOP_CHAR(tty) << 8 | START_CHAR(tty); } else { - /* - * Xon/Xoff code - * - * Check the IXOFF status in the iflag component of the - * termios structure. If IXOFF is not set, the pre-xon/xoff - * code is executed. - */ - if (iflag & IXOFF) { - dev_dbg(ddev, "%s request to enable xonxoff iflag=%04x\n", - __func__, iflag); - /* Try to enable the XON/XOFF on the ftdi_sio - * Set the vstart and vstop -- could have been done up - * above where a lot of other dereferencing is done but - * that would be very inefficient as vstart and vstop - * are not always needed. - */ - vstart = termios->c_cc[VSTART]; - vstop = termios->c_cc[VSTOP]; - urb_value = (vstop << 8) | (vstart); - - if (usb_control_msg(dev, - usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, - FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - urb_value , (FTDI_SIO_XON_XOFF_HS - | priv->interface), - NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(&port->dev, "urb failed to set to " - "xon/xoff flow control\n"); - } - } else { - /* else clause to only run if cflag ! CRTSCTS and iflag - * ! XOFF. CHECKME Assuming XON/XOFF handled by tty - * stack - not by device */ - dev_dbg(ddev, "%s Turning off hardware flow control\n", __func__); - if (usb_control_msg(dev, - usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, - FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, - NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(ddev, "urb failed to clear flow control\n"); - } - } + dev_dbg(&port->dev, "disabling flow control\n"); + index = FTDI_SIO_DISABLE_FLOW_CTRL; } + + index |= priv->interface; + + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + value, index, NULL, 0, WDR_TIMEOUT); + if (ret < 0) + dev_err(&port->dev, "failed to set flow control: %d\n", ret); } /* diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2058852a87fa..664e61f16b6a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1916,7 +1916,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) }, /* D-Link DWM-156 (variant) */ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) }, { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d03, 0xff) }, - { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) }, /* D-Link DWM-158 */ + { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff), /* D-Link DWM-158 */ + .driver_info = RSVD(4) | RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d0e, 0xff) }, /* D-Link DWM-157 C1 */ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff), /* D-Link DWM-221 B1 */ .driver_info = RSVD(4) }, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 46dd09da2434..5d1a1931967e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -533,6 +533,17 @@ static int pl2303_set_line_request(struct usb_serial_port *port, return 0; } +static bool pl2303_termios_change(const struct ktermios *a, const struct ktermios *b) +{ + bool ixon_change; + + ixon_change = ((a->c_iflag ^ b->c_iflag) & (IXON | IXANY)) || + a->c_cc[VSTART] != b->c_cc[VSTART] || + a->c_cc[VSTOP] != b->c_cc[VSTOP]; + + return tty_termios_hw_change(a, b) || ixon_change; +} + static void pl2303_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { @@ -544,7 +555,7 @@ static void pl2303_set_termios(struct tty_struct *tty, int ret; u8 control; - if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !pl2303_termios_change(&tty->termios, old_termios)) return; buf = kzalloc(7, GFP_KERNEL); @@ -662,6 +673,9 @@ static void pl2303_set_termios(struct tty_struct *tty, pl2303_vendor_write(serial, 0x0, 0x41); else pl2303_vendor_write(serial, 0x0, 0x61); + } else if (I_IXON(tty) && !I_IXANY(tty) && START_CHAR(tty) == 0x11 && + STOP_CHAR(tty) == 0x13) { + pl2303_vendor_write(serial, 0x0, 0xc0); } else { pl2303_vendor_write(serial, 0x0, 0x0); } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 268ffa6b51d2..f7aaa7f079e1 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -192,7 +192,7 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty) if (retval) goto error_get_interface; - retval = tty_port_install(&port->port, driver, tty); + retval = tty_standard_install(driver, tty); if (retval) goto error_init_termios; diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index ec4d92c92762..4f542df37a44 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -464,7 +464,7 @@ static int init_freecom(struct us_data *us) usb_stor_dbg(us, "result from activate reset is %d\n", result); /* wait 250ms */ - mdelay(250); + msleep(250); /* clear reset */ result = usb_stor_control_msg(us, us->send_ctrl_pipe, @@ -472,7 +472,7 @@ static int init_freecom(struct us_data *us) usb_stor_dbg(us, "result from clear reset is %d\n", result); /* wait 3 seconds */ - mdelay(3 * 1000); + msleep(3 * 1000); return USB_STOR_TRANSPORT_GOOD; } diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 6034c39b67d1..9e9de5452860 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -836,6 +836,12 @@ static int uas_slave_configure(struct scsi_device *sdev) if (devinfo->flags & US_FL_BROKEN_FUA) sdev->broken_fua = 1; + /* UAS also needs to support FL_ALWAYS_SYNC */ + if (devinfo->flags & US_FL_ALWAYS_SYNC) { + sdev->skip_ms_page_3f = 1; + sdev->skip_ms_page_8 = 1; + sdev->wce_default_on = 1; + } scsi_change_queue_depth(sdev, devinfo->qdepth - 2); return 0; } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 747d3a9596d9..22fcfccf453a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2321,6 +2321,15 @@ UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, "Micro Mini 1GB", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), +/* "G-DRIVE" external HDD hangs on write without these. + * Patch submitted by Alexander Kappner <agk@godking.net> + */ +UNUSUAL_DEV(0x4971, 0x8024, 0x0000, 0x9999, + "SimpleTech", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_ALWAYS_SYNC), + /* * Nick Bowler <nbowler@elliptictech.com> * SCSI stack spams (otherwise harmless) error messages. diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 38434d88954a..d0bdebd87ce3 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -107,3 +107,12 @@ UNUSUAL_DEV(0x4971, 0x8017, 0x0000, 0x9999, "External HDD", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_REPORT_OPCODES), + +/* "G-DRIVE" external HDD hangs on write without these. + * Patch submitted by Alexander Kappner <agk@godking.net> + */ +UNUSUAL_DEV(0x4971, 0x8024, 0x0000, 0x9999, + "SimpleTech", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_ALWAYS_SYNC), diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig index 030f88cb0c3f..2c8eab11a493 100644 --- a/drivers/usb/typec/Kconfig +++ b/drivers/usb/typec/Kconfig @@ -49,6 +49,7 @@ config TYPEC_TCPM tristate "USB Type-C Port Controller Manager" depends on USB select USB_ROLE_SWITCH + select POWER_SUPPLY help The Type-C Port Controller Manager provides a USB PD and USB Type-C state machine for use with Type-C Port Controllers. diff --git a/drivers/usb/typec/fusb302/Kconfig b/drivers/usb/typec/fusb302/Kconfig index 48a4f2fcee03..fce099ff39fe 100644 --- a/drivers/usb/typec/fusb302/Kconfig +++ b/drivers/usb/typec/fusb302/Kconfig @@ -1,6 +1,6 @@ config TYPEC_FUSB302 tristate "Fairchild FUSB302 Type-C chip driver" - depends on I2C && POWER_SUPPLY + depends on I2C help The Fairchild FUSB302 Type-C chip driver that works with Type-C Port Controller Manager to provide USB PD and USB diff --git a/drivers/usb/typec/fusb302/fusb302.c b/drivers/usb/typec/fusb302/fusb302.c index 703617129067..1e68da10bf17 100644 --- a/drivers/usb/typec/fusb302/fusb302.c +++ b/drivers/usb/typec/fusb302/fusb302.c @@ -18,7 +18,6 @@ #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/pinctrl/consumer.h> -#include <linux/power_supply.h> #include <linux/proc_fs.h> #include <linux/regulator/consumer.h> #include <linux/sched/clock.h> @@ -99,11 +98,6 @@ struct fusb302_chip { /* lock for sharing chip states */ struct mutex lock; - /* psy + psy status */ - struct power_supply *psy; - u32 current_limit; - u32 supply_voltage; - /* chip status */ enum toggling_mode toggling_mode; enum src_current_status src_current_status; @@ -120,6 +114,7 @@ struct fusb302_chip { enum typec_cc_polarity cc_polarity; enum typec_cc_status cc1; enum typec_cc_status cc2; + u32 snk_pdo[PDO_MAX_OBJECTS]; #ifdef CONFIG_DEBUG_FS struct dentry *dentry; @@ -220,32 +215,28 @@ DEFINE_SHOW_ATTRIBUTE(fusb302_debug); static struct dentry *rootdir; -static int fusb302_debugfs_init(struct fusb302_chip *chip) +static void fusb302_debugfs_init(struct fusb302_chip *chip) { mutex_init(&chip->logbuffer_lock); - if (!rootdir) { + if (!rootdir) rootdir = debugfs_create_dir("fusb302", NULL); - if (!rootdir) - return -ENOMEM; - } chip->dentry = debugfs_create_file(dev_name(chip->dev), S_IFREG | 0444, rootdir, chip, &fusb302_debug_fops); - - return 0; } static void fusb302_debugfs_exit(struct fusb302_chip *chip) { debugfs_remove(chip->dentry); + debugfs_remove(rootdir); } #else static void fusb302_log(const struct fusb302_chip *chip, const char *fmt, ...) { } -static int fusb302_debugfs_init(const struct fusb302_chip *chip) { return 0; } +static void fusb302_debugfs_init(const struct fusb302_chip *chip) { } static void fusb302_debugfs_exit(const struct fusb302_chip *chip) { } #endif @@ -861,13 +852,11 @@ static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge) chip->vbus_on = on; fusb302_log(chip, "vbus := %s", on ? "On" : "Off"); } - if (chip->charge_on == charge) { + if (chip->charge_on == charge) fusb302_log(chip, "charge is already %s", charge ? "On" : "Off"); - } else { + else chip->charge_on = charge; - power_supply_changed(chip->psy); - } done: mutex_unlock(&chip->lock); @@ -883,11 +872,6 @@ static int tcpm_set_current_limit(struct tcpc_dev *dev, u32 max_ma, u32 mv) fusb302_log(chip, "current limit: %d ma, %d mv (not implemented)", max_ma, mv); - chip->supply_voltage = mv; - chip->current_limit = max_ma; - - power_supply_changed(chip->psy); - return 0; } @@ -1212,11 +1196,6 @@ static const u32 snk_pdo[] = { static const struct tcpc_config fusb302_tcpc_config = { .src_pdo = src_pdo, .nr_src_pdo = ARRAY_SIZE(src_pdo), - .snk_pdo = snk_pdo, - .nr_snk_pdo = ARRAY_SIZE(snk_pdo), - .max_snk_mv = 5000, - .max_snk_ma = 3000, - .max_snk_mw = 15000, .operating_snk_mw = 2500, .type = TYPEC_PORT_DRP, .data = TYPEC_PORT_DRD, @@ -1686,43 +1665,6 @@ done: return IRQ_HANDLED; } -static int fusb302_psy_get_property(struct power_supply *psy, - enum power_supply_property psp, - union power_supply_propval *val) -{ - struct fusb302_chip *chip = power_supply_get_drvdata(psy); - - switch (psp) { - case POWER_SUPPLY_PROP_ONLINE: - val->intval = chip->charge_on; - break; - case POWER_SUPPLY_PROP_VOLTAGE_NOW: - val->intval = chip->supply_voltage * 1000; /* mV -> µV */ - break; - case POWER_SUPPLY_PROP_CURRENT_MAX: - val->intval = chip->current_limit * 1000; /* mA -> µA */ - break; - default: - return -ENODATA; - } - - return 0; -} - -static enum power_supply_property fusb302_psy_properties[] = { - POWER_SUPPLY_PROP_ONLINE, - POWER_SUPPLY_PROP_VOLTAGE_NOW, - POWER_SUPPLY_PROP_CURRENT_MAX, -}; - -static const struct power_supply_desc fusb302_psy_desc = { - .name = "fusb302-typec-source", - .type = POWER_SUPPLY_TYPE_USB_TYPE_C, - .properties = fusb302_psy_properties, - .num_properties = ARRAY_SIZE(fusb302_psy_properties), - .get_property = fusb302_psy_get_property, -}; - static int init_gpio(struct fusb302_chip *chip) { struct device_node *node; @@ -1756,13 +1698,35 @@ static int init_gpio(struct fusb302_chip *chip) return 0; } +static int fusb302_composite_snk_pdo_array(struct fusb302_chip *chip) +{ + struct device *dev = chip->dev; + u32 max_uv, max_ua; + + chip->snk_pdo[0] = PDO_FIXED(5000, 400, PDO_FIXED_FLAGS); + + /* + * As max_snk_ma/mv/mw is not needed for tcpc_config, + * those settings should be passed in via sink PDO, so + * "fcs, max-sink-*" properties will be deprecated, to + * perserve compatibility with existing users of them, + * we read those properties to convert them to be a var + * PDO. + */ + if (device_property_read_u32(dev, "fcs,max-sink-microvolt", &max_uv) || + device_property_read_u32(dev, "fcs,max-sink-microamp", &max_ua)) + return 1; + + chip->snk_pdo[1] = PDO_VAR(5000, max_uv / 1000, max_ua / 1000); + return 2; +} + static int fusb302_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct fusb302_chip *chip; struct i2c_adapter *adapter; struct device *dev = &client->dev; - struct power_supply_config cfg = {}; const char *name; int ret = 0; u32 v; @@ -1784,18 +1748,13 @@ static int fusb302_probe(struct i2c_client *client, chip->tcpc_dev.config = &chip->tcpc_config; mutex_init(&chip->lock); - if (!device_property_read_u32(dev, "fcs,max-sink-microvolt", &v)) - chip->tcpc_config.max_snk_mv = v / 1000; - - if (!device_property_read_u32(dev, "fcs,max-sink-microamp", &v)) - chip->tcpc_config.max_snk_ma = v / 1000; - - if (!device_property_read_u32(dev, "fcs,max-sink-microwatt", &v)) - chip->tcpc_config.max_snk_mw = v / 1000; - if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v)) chip->tcpc_config.operating_snk_mw = v / 1000; + /* Composite sink PDO */ + chip->tcpc_config.nr_snk_pdo = fusb302_composite_snk_pdo_array(chip); + chip->tcpc_config.snk_pdo = chip->snk_pdo; + /* * Devicetree platforms should get extcon via phandle (not yet * supported). On ACPI platforms, we get the name from a device prop. @@ -1809,17 +1768,7 @@ static int fusb302_probe(struct i2c_client *client, return -EPROBE_DEFER; } - cfg.drv_data = chip; - chip->psy = devm_power_supply_register(dev, &fusb302_psy_desc, &cfg); - if (IS_ERR(chip->psy)) { - ret = PTR_ERR(chip->psy); - dev_err(chip->dev, "Error registering power-supply: %d\n", ret); - return ret; - } - - ret = fusb302_debugfs_init(chip); - if (ret < 0) - return ret; + fusb302_debugfs_init(chip); chip->wq = create_singlethread_workqueue(dev_name(chip->dev)); if (!chip->wq) { diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c index f89093bd7185..9d8330e9c431 100644 --- a/drivers/usb/typec/mux.c +++ b/drivers/usb/typec/mux.c @@ -178,7 +178,7 @@ EXPORT_SYMBOL_GPL(typec_mux_register); /** * typec_mux_unregister - Unregister Multiplexer Switch - * @sw: USB Type-C Connector Multiplexer/DeMultiplexer + * @mux: USB Type-C Connector Multiplexer/DeMultiplexer * * Unregister mux that was registered with typec_mux_register(). */ diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c index ded49e3bf2b0..8a201dd53d36 100644 --- a/drivers/usb/typec/tcpm.c +++ b/drivers/usb/typec/tcpm.c @@ -12,13 +12,17 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/power_supply.h> #include <linux/proc_fs.h> +#include <linux/property.h> #include <linux/sched/clock.h> #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/usb/pd.h> +#include <linux/usb/pd_ado.h> #include <linux/usb/pd_bdo.h> +#include <linux/usb/pd_ext_sdb.h> #include <linux/usb/pd_vdo.h> #include <linux/usb/role.h> #include <linux/usb/tcpm.h> @@ -48,6 +52,7 @@ S(SNK_DISCOVERY_DEBOUNCE_DONE), \ S(SNK_WAIT_CAPABILITIES), \ S(SNK_NEGOTIATE_CAPABILITIES), \ + S(SNK_NEGOTIATE_PPS_CAPABILITIES), \ S(SNK_TRANSITION_SINK), \ S(SNK_TRANSITION_SINK_VBUS), \ S(SNK_READY), \ @@ -112,6 +117,11 @@ S(SNK_TRYWAIT_VBUS), \ S(BIST_RX), \ \ + S(GET_STATUS_SEND), \ + S(GET_STATUS_SEND_TIMEOUT), \ + S(GET_PPS_STATUS_SEND), \ + S(GET_PPS_STATUS_SEND_TIMEOUT), \ + \ S(ERROR_RECOVERY), \ S(PORT_RESET), \ S(PORT_RESET_WAIT_OFF) @@ -142,6 +152,7 @@ enum pd_msg_request { PD_MSG_NONE = 0, PD_MSG_CTRL_REJECT, PD_MSG_CTRL_WAIT, + PD_MSG_CTRL_NOT_SUPP, PD_MSG_DATA_SINK_CAP, PD_MSG_DATA_SOURCE_CAP, }; @@ -167,6 +178,16 @@ struct pd_mode_data { struct typec_altmode_desc altmode_desc[SVID_DISCOVERY_MAX]; }; +struct pd_pps_data { + u32 min_volt; + u32 max_volt; + u32 max_curr; + u32 out_volt; + u32 op_curr; + bool supported; + bool active; +}; + struct tcpm_port { struct device *dev; @@ -235,6 +256,7 @@ struct tcpm_port { struct completion swap_complete; int swap_status; + unsigned int negotiated_rev; unsigned int message_id; unsigned int caps_count; unsigned int hard_reset_count; @@ -257,15 +279,18 @@ struct tcpm_port { u32 snk_vdo[VDO_MAX_OBJECTS]; unsigned int nr_snk_vdo; - unsigned int max_snk_mv; - unsigned int max_snk_ma; - unsigned int max_snk_mw; unsigned int operating_snk_mw; + bool update_sink_caps; /* Requested current / voltage */ u32 current_limit; u32 supply_voltage; + /* Used to export TA voltage and current */ + struct power_supply *psy; + struct power_supply_desc psy_desc; + enum power_supply_usb_type usb_type; + u32 bist_request; /* PD state for Vendor Defined Messages */ @@ -277,8 +302,13 @@ struct tcpm_port { /* VDO to retry if UFP responder replied busy */ u32 vdo_retry; - /* Alternate mode data */ + /* PPS */ + struct pd_pps_data pps_data; + struct completion pps_complete; + bool pps_pending; + int pps_status; + /* Alternate mode data */ struct pd_mode_data mode_data; struct typec_altmode *partner_altmode[SVID_DISCOVERY_MAX]; struct typec_altmode *port_altmode[SVID_DISCOVERY_MAX]; @@ -496,6 +526,16 @@ static void tcpm_log_source_caps(struct tcpm_port *port) pdo_max_voltage(pdo), pdo_max_power(pdo)); break; + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) == APDO_TYPE_PPS) + scnprintf(msg, sizeof(msg), + "%u-%u mV, %u mA", + pdo_pps_apdo_min_voltage(pdo), + pdo_pps_apdo_max_voltage(pdo), + pdo_pps_apdo_max_current(pdo)); + else + strcpy(msg, "undefined APDO"); + break; default: strcpy(msg, "undefined"); break; @@ -526,21 +566,16 @@ DEFINE_SHOW_ATTRIBUTE(tcpm_debug); static struct dentry *rootdir; -static int tcpm_debugfs_init(struct tcpm_port *port) +static void tcpm_debugfs_init(struct tcpm_port *port) { mutex_init(&port->logbuffer_lock); /* /sys/kernel/debug/tcpm/usbcX */ - if (!rootdir) { + if (!rootdir) rootdir = debugfs_create_dir("tcpm", NULL); - if (!rootdir) - return -ENOMEM; - } port->dentry = debugfs_create_file(dev_name(port->dev), S_IFREG | 0444, rootdir, port, &tcpm_debug_fops); - - return 0; } static void tcpm_debugfs_exit(struct tcpm_port *port) @@ -555,7 +590,7 @@ static void tcpm_log(const struct tcpm_port *port, const char *fmt, ...) { } __printf(2, 3) static void tcpm_log_force(struct tcpm_port *port, const char *fmt, ...) { } static void tcpm_log_source_caps(struct tcpm_port *port) { } -static int tcpm_debugfs_init(const struct tcpm_port *port) { return 0; } +static void tcpm_debugfs_init(const struct tcpm_port *port) { } static void tcpm_debugfs_exit(const struct tcpm_port *port) { } #endif @@ -793,11 +828,13 @@ static int tcpm_pd_send_source_caps(struct tcpm_port *port) msg.header = PD_HEADER_LE(PD_CTRL_REJECT, port->pwr_role, port->data_role, + port->negotiated_rev, port->message_id, 0); } else { msg.header = PD_HEADER_LE(PD_DATA_SOURCE_CAP, port->pwr_role, port->data_role, + port->negotiated_rev, port->message_id, port->nr_src_pdo); } @@ -818,11 +855,13 @@ static int tcpm_pd_send_sink_caps(struct tcpm_port *port) msg.header = PD_HEADER_LE(PD_CTRL_REJECT, port->pwr_role, port->data_role, + port->negotiated_rev, port->message_id, 0); } else { msg.header = PD_HEADER_LE(PD_DATA_SINK_CAP, port->pwr_role, port->data_role, + port->negotiated_rev, port->message_id, port->nr_snk_pdo); } @@ -1189,6 +1228,7 @@ static void vdm_run_state_machine(struct tcpm_port *port) msg.header = PD_HEADER_LE(PD_DATA_VENDOR_DEF, port->pwr_role, port->data_role, + port->negotiated_rev, port->message_id, port->vdo_count); for (i = 0; i < port->vdo_count; i++) msg.payload[i] = cpu_to_le32(port->vdo_data[i]); @@ -1260,6 +1300,8 @@ enum pdo_err { PDO_ERR_FIXED_NOT_SORTED, PDO_ERR_VARIABLE_BATT_NOT_SORTED, PDO_ERR_DUPE_PDO, + PDO_ERR_PPS_APDO_NOT_SORTED, + PDO_ERR_DUPE_PPS_APDO, }; static const char * const pdo_err_msg[] = { @@ -1275,6 +1317,10 @@ static const char * const pdo_err_msg[] = { " err: Variable/Battery supply pdos should be in increasing order of their minimum voltage", [PDO_ERR_DUPE_PDO] = " err: Variable/Batt supply pdos cannot have same min/max voltage", + [PDO_ERR_PPS_APDO_NOT_SORTED] = + " err: Programmable power supply apdos should be in increasing order of their maximum voltage", + [PDO_ERR_DUPE_PPS_APDO] = + " err: Programmable power supply apdos cannot have same min/max voltage and max current", }; static enum pdo_err tcpm_caps_err(struct tcpm_port *port, const u32 *pdo, @@ -1324,6 +1370,26 @@ static enum pdo_err tcpm_caps_err(struct tcpm_port *port, const u32 *pdo, pdo_min_voltage(pdo[i - 1]))) return PDO_ERR_DUPE_PDO; break; + /* + * The Programmable Power Supply APDOs, if present, + * shall be sent in Maximum Voltage order; + * lowest to highest. + */ + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo[i]) != APDO_TYPE_PPS) + break; + + if (pdo_pps_apdo_max_current(pdo[i]) < + pdo_pps_apdo_max_current(pdo[i - 1])) + return PDO_ERR_PPS_APDO_NOT_SORTED; + else if (pdo_pps_apdo_min_voltage(pdo[i]) == + pdo_pps_apdo_min_voltage(pdo[i - 1]) && + pdo_pps_apdo_max_voltage(pdo[i]) == + pdo_pps_apdo_max_voltage(pdo[i - 1]) && + pdo_pps_apdo_max_current(pdo[i]) == + pdo_pps_apdo_max_current(pdo[i - 1])) + return PDO_ERR_DUPE_PPS_APDO; + break; default: tcpm_log_force(port, " Unknown pdo type"); } @@ -1349,11 +1415,48 @@ static int tcpm_validate_caps(struct tcpm_port *port, const u32 *pdo, /* * PD (data, control) command handling functions */ +static inline enum tcpm_state ready_state(struct tcpm_port *port) +{ + if (port->pwr_role == TYPEC_SOURCE) + return SRC_READY; + else + return SNK_READY; +} + +static int tcpm_pd_send_control(struct tcpm_port *port, + enum pd_ctrl_msg_type type); + +static void tcpm_handle_alert(struct tcpm_port *port, const __le32 *payload, + int cnt) +{ + u32 p0 = le32_to_cpu(payload[0]); + unsigned int type = usb_pd_ado_type(p0); + + if (!type) { + tcpm_log(port, "Alert message received with no type"); + return; + } + + /* Just handling non-battery alerts for now */ + if (!(type & USB_PD_ADO_TYPE_BATT_STATUS_CHANGE)) { + switch (port->state) { + case SRC_READY: + case SNK_READY: + tcpm_set_state(port, GET_STATUS_SEND, 0); + break; + default: + tcpm_queue_message(port, PD_MSG_CTRL_WAIT); + break; + } + } +} + static void tcpm_pd_data_request(struct tcpm_port *port, const struct pd_message *msg) { enum pd_data_msg_type type = pd_header_type_le(msg->header); unsigned int cnt = pd_header_cnt_le(msg->header); + unsigned int rev = pd_header_rev_le(msg->header); unsigned int i; switch (type) { @@ -1372,6 +1475,17 @@ static void tcpm_pd_data_request(struct tcpm_port *port, port->nr_source_caps); /* + * Adjust revision in subsequent message headers, as required, + * to comply with 6.2.1.1.5 of the USB PD 3.0 spec. We don't + * support Rev 1.0 so just do nothing in that scenario. + */ + if (rev == PD_REV10) + break; + + if (rev < PD_MAX_REV) + port->negotiated_rev = rev; + + /* * This message may be received even if VBUS is not * present. This is quite unexpected; see USB PD * specification, sections 8.3.3.6.3.1 and 8.3.3.6.3.2. @@ -1392,6 +1506,20 @@ static void tcpm_pd_data_request(struct tcpm_port *port, tcpm_queue_message(port, PD_MSG_CTRL_REJECT); break; } + + /* + * Adjust revision in subsequent message headers, as required, + * to comply with 6.2.1.1.5 of the USB PD 3.0 spec. We don't + * support Rev 1.0 so just reject in that scenario. + */ + if (rev == PD_REV10) { + tcpm_queue_message(port, PD_MSG_CTRL_REJECT); + break; + } + + if (rev < PD_MAX_REV) + port->negotiated_rev = rev; + port->sink_request = le32_to_cpu(msg->payload[0]); tcpm_set_state(port, SRC_NEGOTIATE_CAPABILITIES, 0); break; @@ -1410,12 +1538,29 @@ static void tcpm_pd_data_request(struct tcpm_port *port, tcpm_set_state(port, BIST_RX, 0); } break; + case PD_DATA_ALERT: + tcpm_handle_alert(port, msg->payload, cnt); + break; + case PD_DATA_BATT_STATUS: + case PD_DATA_GET_COUNTRY_INFO: + /* Currently unsupported */ + tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP); + break; default: tcpm_log(port, "Unhandled data message type %#x", type); break; } } +static void tcpm_pps_complete(struct tcpm_port *port, int result) +{ + if (port->pps_pending) { + port->pps_status = result; + port->pps_pending = false; + complete(&port->pps_complete); + } +} + static void tcpm_pd_ctrl_request(struct tcpm_port *port, const struct pd_message *msg) { @@ -1483,6 +1628,7 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, break; case PD_CTRL_REJECT: case PD_CTRL_WAIT: + case PD_CTRL_NOT_SUPP: switch (port->state) { case SNK_NEGOTIATE_CAPABILITIES: /* USB PD specification, Figure 8-43 */ @@ -1492,6 +1638,14 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, next_state = SNK_WAIT_CAPABILITIES; tcpm_set_state(port, next_state, 0); break; + case SNK_NEGOTIATE_PPS_CAPABILITIES: + /* Revert data back from any requested PPS updates */ + port->pps_data.out_volt = port->supply_voltage; + port->pps_data.op_curr = port->current_limit; + port->pps_status = (type == PD_CTRL_WAIT ? + -EAGAIN : -EOPNOTSUPP); + tcpm_set_state(port, SNK_READY, 0); + break; case DR_SWAP_SEND: port->swap_status = (type == PD_CTRL_WAIT ? -EAGAIN : -EOPNOTSUPP); @@ -1514,6 +1668,13 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, case PD_CTRL_ACCEPT: switch (port->state) { case SNK_NEGOTIATE_CAPABILITIES: + port->pps_data.active = false; + tcpm_set_state(port, SNK_TRANSITION_SINK, 0); + break; + case SNK_NEGOTIATE_PPS_CAPABILITIES: + port->pps_data.active = true; + port->supply_voltage = port->pps_data.out_volt; + port->current_limit = port->pps_data.op_curr; tcpm_set_state(port, SNK_TRANSITION_SINK, 0); break; case SOFT_RESET_SEND: @@ -1587,12 +1748,75 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, break; } break; + case PD_CTRL_GET_SOURCE_CAP_EXT: + case PD_CTRL_GET_STATUS: + case PD_CTRL_FR_SWAP: + case PD_CTRL_GET_PPS_STATUS: + case PD_CTRL_GET_COUNTRY_CODES: + /* Currently not supported */ + tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP); + break; default: tcpm_log(port, "Unhandled ctrl message type %#x", type); break; } } +static void tcpm_pd_ext_msg_request(struct tcpm_port *port, + const struct pd_message *msg) +{ + enum pd_ext_msg_type type = pd_header_type_le(msg->header); + unsigned int data_size = pd_ext_header_data_size_le(msg->ext_msg.header); + + if (!(msg->ext_msg.header & PD_EXT_HDR_CHUNKED)) { + tcpm_log(port, "Unchunked extended messages unsupported"); + return; + } + + if (data_size > PD_EXT_MAX_CHUNK_DATA) { + tcpm_log(port, "Chunk handling not yet supported"); + return; + } + + switch (type) { + case PD_EXT_STATUS: + /* + * If PPS related events raised then get PPS status to clear + * (see USB PD 3.0 Spec, 6.5.2.4) + */ + if (msg->ext_msg.data[USB_PD_EXT_SDB_EVENT_FLAGS] & + USB_PD_EXT_SDB_PPS_EVENTS) + tcpm_set_state(port, GET_PPS_STATUS_SEND, 0); + else + tcpm_set_state(port, ready_state(port), 0); + break; + case PD_EXT_PPS_STATUS: + /* + * For now the PPS status message is used to clear events + * and nothing more. + */ + tcpm_set_state(port, ready_state(port), 0); + break; + case PD_EXT_SOURCE_CAP_EXT: + case PD_EXT_GET_BATT_CAP: + case PD_EXT_GET_BATT_STATUS: + case PD_EXT_BATT_CAP: + case PD_EXT_GET_MANUFACTURER_INFO: + case PD_EXT_MANUFACTURER_INFO: + case PD_EXT_SECURITY_REQUEST: + case PD_EXT_SECURITY_RESPONSE: + case PD_EXT_FW_UPDATE_REQUEST: + case PD_EXT_FW_UPDATE_RESPONSE: + case PD_EXT_COUNTRY_INFO: + case PD_EXT_COUNTRY_CODES: + tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP); + break; + default: + tcpm_log(port, "Unhandled extended message type %#x", type); + break; + } +} + static void tcpm_pd_rx_handler(struct work_struct *work) { struct pd_rx_event *event = container_of(work, @@ -1633,7 +1857,9 @@ static void tcpm_pd_rx_handler(struct work_struct *work) "Data role mismatch, initiating error recovery"); tcpm_set_state(port, ERROR_RECOVERY, 0); } else { - if (cnt) + if (msg->header & PD_HEADER_EXT_HDR) + tcpm_pd_ext_msg_request(port, msg); + else if (cnt) tcpm_pd_data_request(port, msg); else tcpm_pd_ctrl_request(port, msg); @@ -1668,6 +1894,7 @@ static int tcpm_pd_send_control(struct tcpm_port *port, memset(&msg, 0, sizeof(msg)); msg.header = PD_HEADER_LE(type, port->pwr_role, port->data_role, + port->negotiated_rev, port->message_id, 0); return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); @@ -1693,6 +1920,9 @@ static bool tcpm_send_queued_message(struct tcpm_port *port) case PD_MSG_CTRL_REJECT: tcpm_pd_send_control(port, PD_CTRL_REJECT); break; + case PD_MSG_CTRL_NOT_SUPP: + tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP); + break; case PD_MSG_DATA_SINK_CAP: tcpm_pd_send_sink_caps(port); break; @@ -1772,84 +2002,254 @@ static int tcpm_pd_check_request(struct tcpm_port *port) return 0; } -static int tcpm_pd_select_pdo(struct tcpm_port *port) +#define min_power(x, y) min(pdo_max_power(x), pdo_max_power(y)) +#define min_current(x, y) min(pdo_max_current(x), pdo_max_current(y)) + +static int tcpm_pd_select_pdo(struct tcpm_port *port, int *sink_pdo, + int *src_pdo) { - unsigned int i, max_mw = 0, max_mv = 0; + unsigned int i, j, max_src_mv = 0, min_src_mv = 0, max_mw = 0, + max_mv = 0, src_mw = 0, src_ma = 0, max_snk_mv = 0, + min_snk_mv = 0; int ret = -EINVAL; + port->pps_data.supported = false; + port->usb_type = POWER_SUPPLY_USB_TYPE_PD; + /* - * Select the source PDO providing the most power while staying within - * the board's voltage limits. Prefer PDO providing exp + * Select the source PDO providing the most power which has a + * matchig sink cap. */ for (i = 0; i < port->nr_source_caps; i++) { u32 pdo = port->source_caps[i]; enum pd_pdo_type type = pdo_type(pdo); - unsigned int mv, ma, mw; - if (type == PDO_TYPE_FIXED) - mv = pdo_fixed_voltage(pdo); - else - mv = pdo_min_voltage(pdo); + switch (type) { + case PDO_TYPE_FIXED: + max_src_mv = pdo_fixed_voltage(pdo); + min_src_mv = max_src_mv; + break; + case PDO_TYPE_BATT: + case PDO_TYPE_VAR: + max_src_mv = pdo_max_voltage(pdo); + min_src_mv = pdo_min_voltage(pdo); + break; + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) == APDO_TYPE_PPS) { + port->pps_data.supported = true; + port->usb_type = + POWER_SUPPLY_USB_TYPE_PD_PPS; + } + continue; + default: + tcpm_log(port, "Invalid source PDO type, ignoring"); + continue; + } - if (type == PDO_TYPE_BATT) { - mw = pdo_max_power(pdo); - } else { - ma = min(pdo_max_current(pdo), - port->max_snk_ma); - mw = ma * mv / 1000; + switch (type) { + case PDO_TYPE_FIXED: + case PDO_TYPE_VAR: + src_ma = pdo_max_current(pdo); + src_mw = src_ma * min_src_mv / 1000; + break; + case PDO_TYPE_BATT: + src_mw = pdo_max_power(pdo); + break; + case PDO_TYPE_APDO: + continue; + default: + tcpm_log(port, "Invalid source PDO type, ignoring"); + continue; } - /* Perfer higher voltages if available */ - if ((mw > max_mw || (mw == max_mw && mv > max_mv)) && - mv <= port->max_snk_mv) { - ret = i; - max_mw = mw; - max_mv = mv; + for (j = 0; j < port->nr_snk_pdo; j++) { + pdo = port->snk_pdo[j]; + + switch (pdo_type(pdo)) { + case PDO_TYPE_FIXED: + max_snk_mv = pdo_fixed_voltage(pdo); + min_snk_mv = max_snk_mv; + break; + case PDO_TYPE_BATT: + case PDO_TYPE_VAR: + max_snk_mv = pdo_max_voltage(pdo); + min_snk_mv = pdo_min_voltage(pdo); + break; + case PDO_TYPE_APDO: + continue; + default: + tcpm_log(port, "Invalid sink PDO type, ignoring"); + continue; + } + + if (max_src_mv <= max_snk_mv && + min_src_mv >= min_snk_mv) { + /* Prefer higher voltages if available */ + if ((src_mw == max_mw && min_src_mv > max_mv) || + src_mw > max_mw) { + *src_pdo = i; + *sink_pdo = j; + max_mw = src_mw; + max_mv = min_src_mv; + ret = 0; + } + } } } return ret; } +#define min_pps_apdo_current(x, y) \ + min(pdo_pps_apdo_max_current(x), pdo_pps_apdo_max_current(y)) + +static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) +{ + unsigned int i, j, max_mw = 0, max_mv = 0; + unsigned int min_src_mv, max_src_mv, src_ma, src_mw; + unsigned int min_snk_mv, max_snk_mv, snk_ma; + u32 pdo; + unsigned int src_pdo = 0, snk_pdo = 0; + + /* + * Select the source PPS APDO providing the most power while staying + * within the board's limits. We skip the first PDO as this is always + * 5V 3A. + */ + for (i = 1; i < port->nr_source_caps; ++i) { + pdo = port->source_caps[i]; + + switch (pdo_type(pdo)) { + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) != APDO_TYPE_PPS) { + tcpm_log(port, "Not PPS APDO (source), ignoring"); + continue; + } + + min_src_mv = pdo_pps_apdo_min_voltage(pdo); + max_src_mv = pdo_pps_apdo_max_voltage(pdo); + src_ma = pdo_pps_apdo_max_current(pdo); + src_mw = (src_ma * max_src_mv) / 1000; + + /* + * Now search through the sink PDOs to find a matching + * PPS APDO. Again skip the first sink PDO as this will + * always be 5V 3A. + */ + for (j = i; j < port->nr_snk_pdo; j++) { + pdo = port->snk_pdo[j]; + + switch (pdo_type(pdo)) { + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) != APDO_TYPE_PPS) { + tcpm_log(port, + "Not PPS APDO (sink), ignoring"); + continue; + } + + min_snk_mv = + pdo_pps_apdo_min_voltage(pdo); + max_snk_mv = + pdo_pps_apdo_max_voltage(pdo); + snk_ma = + pdo_pps_apdo_max_current(pdo); + break; + default: + tcpm_log(port, + "Not APDO type (sink), ignoring"); + continue; + } + + if (max_src_mv <= max_snk_mv && + min_src_mv >= min_snk_mv) { + /* Prefer higher voltages if available */ + if ((src_mw == max_mw && + min_src_mv > max_mv) || + src_mw > max_mw) { + src_pdo = i; + snk_pdo = j; + max_mw = src_mw; + max_mv = max_src_mv; + } + } + } + + break; + default: + tcpm_log(port, "Not APDO type (source), ignoring"); + continue; + } + } + + if (src_pdo) { + pdo = port->source_caps[src_pdo]; + + port->pps_data.min_volt = pdo_pps_apdo_min_voltage(pdo); + port->pps_data.max_volt = pdo_pps_apdo_max_voltage(pdo); + port->pps_data.max_curr = + min_pps_apdo_current(pdo, port->snk_pdo[snk_pdo]); + port->pps_data.out_volt = + min(pdo_pps_apdo_max_voltage(pdo), port->pps_data.out_volt); + port->pps_data.op_curr = + min(port->pps_data.max_curr, port->pps_data.op_curr); + } + + return src_pdo; +} + static int tcpm_pd_build_request(struct tcpm_port *port, u32 *rdo) { unsigned int mv, ma, mw, flags; unsigned int max_ma, max_mw; enum pd_pdo_type type; - int index; - u32 pdo; + u32 pdo, matching_snk_pdo; + int src_pdo_index = 0; + int snk_pdo_index = 0; + int ret; - index = tcpm_pd_select_pdo(port); - if (index < 0) - return -EINVAL; - pdo = port->source_caps[index]; + ret = tcpm_pd_select_pdo(port, &snk_pdo_index, &src_pdo_index); + if (ret < 0) + return ret; + + pdo = port->source_caps[src_pdo_index]; + matching_snk_pdo = port->snk_pdo[snk_pdo_index]; type = pdo_type(pdo); - if (type == PDO_TYPE_FIXED) + switch (type) { + case PDO_TYPE_FIXED: mv = pdo_fixed_voltage(pdo); - else + break; + case PDO_TYPE_BATT: + case PDO_TYPE_VAR: mv = pdo_min_voltage(pdo); + break; + default: + tcpm_log(port, "Invalid PDO selected!"); + return -EINVAL; + } - /* Select maximum available current within the board's power limit */ + /* Select maximum available current within the sink pdo's limit */ if (type == PDO_TYPE_BATT) { - mw = pdo_max_power(pdo); - ma = 1000 * min(mw, port->max_snk_mw) / mv; + mw = min_power(pdo, matching_snk_pdo); + ma = 1000 * mw / mv; } else { - ma = min(pdo_max_current(pdo), - 1000 * port->max_snk_mw / mv); + ma = min_current(pdo, matching_snk_pdo); + mw = ma * mv / 1000; } - ma = min(ma, port->max_snk_ma); flags = RDO_USB_COMM | RDO_NO_SUSPEND; /* Set mismatch bit if offered power is less than operating power */ - mw = ma * mv / 1000; max_ma = ma; max_mw = mw; if (mw < port->operating_snk_mw) { flags |= RDO_CAP_MISMATCH; - max_mw = port->operating_snk_mw; - max_ma = max_mw * 1000 / mv; + if (type == PDO_TYPE_BATT && + (pdo_max_power(matching_snk_pdo) > pdo_max_power(pdo))) + max_mw = pdo_max_power(matching_snk_pdo); + else if (pdo_max_current(matching_snk_pdo) > + pdo_max_current(pdo)) + max_ma = pdo_max_current(matching_snk_pdo); } tcpm_log(port, "cc=%d cc1=%d cc2=%d vbus=%d vconn=%s polarity=%d", @@ -1858,16 +2258,16 @@ static int tcpm_pd_build_request(struct tcpm_port *port, u32 *rdo) port->polarity); if (type == PDO_TYPE_BATT) { - *rdo = RDO_BATT(index + 1, mw, max_mw, flags); + *rdo = RDO_BATT(src_pdo_index + 1, mw, max_mw, flags); tcpm_log(port, "Requesting PDO %d: %u mV, %u mW%s", - index, mv, mw, + src_pdo_index, mv, mw, flags & RDO_CAP_MISMATCH ? " [mismatch]" : ""); } else { - *rdo = RDO_FIXED(index + 1, ma, max_ma, flags); + *rdo = RDO_FIXED(src_pdo_index + 1, ma, max_ma, flags); tcpm_log(port, "Requesting PDO %d: %u mV, %u mA%s", - index, mv, ma, + src_pdo_index, mv, ma, flags & RDO_CAP_MISMATCH ? " [mismatch]" : ""); } @@ -1891,6 +2291,105 @@ static int tcpm_pd_send_request(struct tcpm_port *port) msg.header = PD_HEADER_LE(PD_DATA_REQUEST, port->pwr_role, port->data_role, + port->negotiated_rev, + port->message_id, 1); + msg.payload[0] = cpu_to_le32(rdo); + + return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); +} + +static int tcpm_pd_build_pps_request(struct tcpm_port *port, u32 *rdo) +{ + unsigned int out_mv, op_ma, op_mw, min_mv, max_mv, max_ma, flags; + enum pd_pdo_type type; + unsigned int src_pdo_index; + u32 pdo; + + src_pdo_index = tcpm_pd_select_pps_apdo(port); + if (!src_pdo_index) + return -EOPNOTSUPP; + + pdo = port->source_caps[src_pdo_index]; + type = pdo_type(pdo); + + switch (type) { + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) != APDO_TYPE_PPS) { + tcpm_log(port, "Invalid APDO selected!"); + return -EINVAL; + } + min_mv = port->pps_data.min_volt; + max_mv = port->pps_data.max_volt; + max_ma = port->pps_data.max_curr; + out_mv = port->pps_data.out_volt; + op_ma = port->pps_data.op_curr; + break; + default: + tcpm_log(port, "Invalid PDO selected!"); + return -EINVAL; + } + + flags = RDO_USB_COMM | RDO_NO_SUSPEND; + + op_mw = (op_ma * out_mv) / 1000; + if (op_mw < port->operating_snk_mw) { + /* + * Try raising current to meet power needs. If that's not enough + * then try upping the voltage. If that's still not enough + * then we've obviously chosen a PPS APDO which really isn't + * suitable so abandon ship. + */ + op_ma = (port->operating_snk_mw * 1000) / out_mv; + if ((port->operating_snk_mw * 1000) % out_mv) + ++op_ma; + op_ma += RDO_PROG_CURR_MA_STEP - (op_ma % RDO_PROG_CURR_MA_STEP); + + if (op_ma > max_ma) { + op_ma = max_ma; + out_mv = (port->operating_snk_mw * 1000) / op_ma; + if ((port->operating_snk_mw * 1000) % op_ma) + ++out_mv; + out_mv += RDO_PROG_VOLT_MV_STEP - + (out_mv % RDO_PROG_VOLT_MV_STEP); + + if (out_mv > max_mv) { + tcpm_log(port, "Invalid PPS APDO selected!"); + return -EINVAL; + } + } + } + + tcpm_log(port, "cc=%d cc1=%d cc2=%d vbus=%d vconn=%s polarity=%d", + port->cc_req, port->cc1, port->cc2, port->vbus_source, + port->vconn_role == TYPEC_SOURCE ? "source" : "sink", + port->polarity); + + *rdo = RDO_PROG(src_pdo_index + 1, out_mv, op_ma, flags); + + tcpm_log(port, "Requesting APDO %d: %u mV, %u mA", + src_pdo_index, out_mv, op_ma); + + port->pps_data.op_curr = op_ma; + port->pps_data.out_volt = out_mv; + + return 0; +} + +static int tcpm_pd_send_pps_request(struct tcpm_port *port) +{ + struct pd_message msg; + int ret; + u32 rdo; + + ret = tcpm_pd_build_pps_request(port, &rdo); + if (ret < 0) + return ret; + + memset(&msg, 0, sizeof(msg)); + msg.header = PD_HEADER_LE(PD_DATA_REQUEST, + port->pwr_role, + port->data_role, + port->negotiated_rev, port->message_id, 1); msg.payload[0] = cpu_to_le32(rdo); @@ -2077,6 +2576,7 @@ static void tcpm_reset_port(struct tcpm_port *port) tcpm_typec_disconnect(port); port->attached = false; port->pd_capable = false; + port->pps_data.supported = false; /* * First Rx ID should be 0; set this to a sentinel of -1 so that @@ -2094,6 +2594,11 @@ static void tcpm_reset_port(struct tcpm_port *port) tcpm_set_attached_state(port, false); port->try_src_count = 0; port->try_snk_count = 0; + port->supply_voltage = 0; + port->current_limit = 0; + port->usb_type = POWER_SUPPLY_USB_TYPE_C; + + power_supply_changed(port->psy); } static void tcpm_detach(struct tcpm_port *port) @@ -2181,14 +2686,6 @@ static inline enum tcpm_state hard_reset_state(struct tcpm_port *port) return SNK_UNATTACHED; } -static inline enum tcpm_state ready_state(struct tcpm_port *port) -{ - if (port->pwr_role == TYPEC_SOURCE) - return SRC_READY; - else - return SNK_READY; -} - static inline enum tcpm_state unattached_state(struct tcpm_port *port) { if (port->port_type == TYPEC_PORT_DRP) { @@ -2338,6 +2835,7 @@ static void run_state_machine(struct tcpm_port *port) typec_set_pwr_opmode(port->typec_port, opmode); port->pwr_opmode = TYPEC_PWR_MODE_USB; port->caps_count = 0; + port->negotiated_rev = PD_MAX_REV; port->message_id = 0; port->rx_msgid = -1; port->explicit_contract = false; @@ -2398,6 +2896,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_swap_complete(port, 0); tcpm_typec_connect(port); + tcpm_check_send_discover(port); /* * 6.3.5 @@ -2421,6 +2920,7 @@ static void run_state_machine(struct tcpm_port *port) case SNK_UNATTACHED: if (!port->non_pd_role_swap) tcpm_swap_complete(port, -ENOTCONN); + tcpm_pps_complete(port, -ENOTCONN); tcpm_snk_detach(port); if (tcpm_start_drp_toggling(port)) { tcpm_set_state(port, DRP_TOGGLING, 0); @@ -2510,6 +3010,7 @@ static void run_state_machine(struct tcpm_port *port) port->cc2 : port->cc1); typec_set_pwr_opmode(port->typec_port, opmode); port->pwr_opmode = TYPEC_PWR_MODE_USB; + port->negotiated_rev = PD_MAX_REV; port->message_id = 0; port->rx_msgid = -1; port->explicit_contract = false; @@ -2580,6 +3081,24 @@ static void run_state_machine(struct tcpm_port *port) PD_T_SENDER_RESPONSE); } break; + case SNK_NEGOTIATE_PPS_CAPABILITIES: + ret = tcpm_pd_send_pps_request(port); + if (ret < 0) { + port->pps_status = ret; + /* + * If this was called due to updates to sink + * capabilities, and pps is no longer valid, we should + * safely fall back to a standard PDO. + */ + if (port->update_sink_caps) + tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); + else + tcpm_set_state(port, SNK_READY, 0); + } else { + tcpm_set_state_cond(port, hard_reset_state(port), + PD_T_SENDER_RESPONSE); + } + break; case SNK_TRANSITION_SINK: case SNK_TRANSITION_SINK_VBUS: tcpm_set_state(port, hard_reset_state(port), @@ -2587,6 +3106,7 @@ static void run_state_machine(struct tcpm_port *port) break; case SNK_READY: port->try_snk_count = 0; + port->update_sink_caps = false; if (port->explicit_contract) { typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_PD); @@ -2596,6 +3116,10 @@ static void run_state_machine(struct tcpm_port *port) tcpm_swap_complete(port, 0); tcpm_typec_connect(port); tcpm_check_send_discover(port); + tcpm_pps_complete(port, port->pps_status); + + power_supply_changed(port->psy); + break; /* Accessory states */ @@ -2642,6 +3166,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON); break; case SNK_HARD_RESET_SINK_OFF: + memset(&port->pps_data, 0, sizeof(port->pps_data)); tcpm_set_vconn(port, false); tcpm_set_charge(port, false); tcpm_set_roles(port, false, TYPEC_SINK, TYPEC_DEVICE); @@ -2860,8 +3385,25 @@ static void run_state_machine(struct tcpm_port *port) /* Always switch to unattached state */ tcpm_set_state(port, unattached_state(port), 0); break; + case GET_STATUS_SEND: + tcpm_pd_send_control(port, PD_CTRL_GET_STATUS); + tcpm_set_state(port, GET_STATUS_SEND_TIMEOUT, + PD_T_SENDER_RESPONSE); + break; + case GET_STATUS_SEND_TIMEOUT: + tcpm_set_state(port, ready_state(port), 0); + break; + case GET_PPS_STATUS_SEND: + tcpm_pd_send_control(port, PD_CTRL_GET_PPS_STATUS); + tcpm_set_state(port, GET_PPS_STATUS_SEND_TIMEOUT, + PD_T_SENDER_RESPONSE); + break; + case GET_PPS_STATUS_SEND_TIMEOUT: + tcpm_set_state(port, ready_state(port), 0); + break; case ERROR_RECOVERY: tcpm_swap_complete(port, -EPROTO); + tcpm_pps_complete(port, -EPROTO); tcpm_set_state(port, PORT_RESET, 0); break; case PORT_RESET: @@ -3444,6 +3986,162 @@ static int tcpm_try_role(const struct typec_capability *cap, int role) return ret; } +static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr) +{ + unsigned int target_mw; + int ret; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (!port->pps_data.active) { + ret = -EOPNOTSUPP; + goto port_unlock; + } + + if (port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + if (op_curr > port->pps_data.max_curr) { + ret = -EINVAL; + goto port_unlock; + } + + target_mw = (op_curr * port->pps_data.out_volt) / 1000; + if (target_mw < port->operating_snk_mw) { + ret = -EINVAL; + goto port_unlock; + } + + reinit_completion(&port->pps_complete); + port->pps_data.op_curr = op_curr; + port->pps_status = 0; + port->pps_pending = true; + tcpm_set_state(port, SNK_NEGOTIATE_PPS_CAPABILITIES, 0); + mutex_unlock(&port->lock); + + if (!wait_for_completion_timeout(&port->pps_complete, + msecs_to_jiffies(PD_PPS_CTRL_TIMEOUT))) + ret = -ETIMEDOUT; + else + ret = port->pps_status; + + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + + return ret; +} + +static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt) +{ + unsigned int target_mw; + int ret; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (!port->pps_data.active) { + ret = -EOPNOTSUPP; + goto port_unlock; + } + + if (port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + if (out_volt < port->pps_data.min_volt || + out_volt > port->pps_data.max_volt) { + ret = -EINVAL; + goto port_unlock; + } + + target_mw = (port->pps_data.op_curr * out_volt) / 1000; + if (target_mw < port->operating_snk_mw) { + ret = -EINVAL; + goto port_unlock; + } + + reinit_completion(&port->pps_complete); + port->pps_data.out_volt = out_volt; + port->pps_status = 0; + port->pps_pending = true; + tcpm_set_state(port, SNK_NEGOTIATE_PPS_CAPABILITIES, 0); + mutex_unlock(&port->lock); + + if (!wait_for_completion_timeout(&port->pps_complete, + msecs_to_jiffies(PD_PPS_CTRL_TIMEOUT))) + ret = -ETIMEDOUT; + else + ret = port->pps_status; + + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + + return ret; +} + +static int tcpm_pps_activate(struct tcpm_port *port, bool activate) +{ + int ret = 0; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (!port->pps_data.supported) { + ret = -EOPNOTSUPP; + goto port_unlock; + } + + /* Trying to deactivate PPS when already deactivated so just bail */ + if (!port->pps_data.active && !activate) + goto port_unlock; + + if (port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + reinit_completion(&port->pps_complete); + port->pps_status = 0; + port->pps_pending = true; + + /* Trigger PPS request or move back to standard PDO contract */ + if (activate) { + port->pps_data.out_volt = port->supply_voltage; + port->pps_data.op_curr = port->current_limit; + tcpm_set_state(port, SNK_NEGOTIATE_PPS_CAPABILITIES, 0); + } else { + tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); + } + mutex_unlock(&port->lock); + + if (!wait_for_completion_timeout(&port->pps_complete, + msecs_to_jiffies(PD_PPS_CTRL_TIMEOUT))) + ret = -ETIMEDOUT; + else + ret = port->pps_status; + + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + + return ret; +} + static void tcpm_init(struct tcpm_port *port) { enum typec_cc_status cc1, cc2; @@ -3569,9 +4267,6 @@ EXPORT_SYMBOL_GPL(tcpm_update_source_capabilities); int tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo, unsigned int nr_pdo, - unsigned int max_snk_mv, - unsigned int max_snk_ma, - unsigned int max_snk_mw, unsigned int operating_snk_mw) { if (tcpm_validate_caps(port, pdo, nr_pdo)) @@ -3579,17 +4274,19 @@ int tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo, mutex_lock(&port->lock); port->nr_snk_pdo = tcpm_copy_pdos(port->snk_pdo, pdo, nr_pdo); - port->max_snk_mv = max_snk_mv; - port->max_snk_ma = max_snk_ma; - port->max_snk_mw = max_snk_mw; port->operating_snk_mw = operating_snk_mw; + port->update_sink_caps = true; switch (port->state) { case SNK_NEGOTIATE_CAPABILITIES: + case SNK_NEGOTIATE_PPS_CAPABILITIES: case SNK_READY: case SNK_TRANSITION_SINK: case SNK_TRANSITION_SINK_VBUS: - tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); + if (port->pps_data.active) + tcpm_set_state(port, SNK_NEGOTIATE_PPS_CAPABILITIES, 0); + else + tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); break; default: break; @@ -3599,6 +4296,231 @@ int tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo, } EXPORT_SYMBOL_GPL(tcpm_update_sink_capabilities); +/* Power Supply access to expose source power information */ +enum tcpm_psy_online_states { + TCPM_PSY_OFFLINE = 0, + TCPM_PSY_FIXED_ONLINE, + TCPM_PSY_PROG_ONLINE, +}; + +static enum power_supply_property tcpm_psy_props[] = { + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_MIN, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static int tcpm_psy_get_online(struct tcpm_port *port, + union power_supply_propval *val) +{ + if (port->vbus_charge) { + if (port->pps_data.active) + val->intval = TCPM_PSY_PROG_ONLINE; + else + val->intval = TCPM_PSY_FIXED_ONLINE; + } else { + val->intval = TCPM_PSY_OFFLINE; + } + + return 0; +} + +static int tcpm_psy_get_voltage_min(struct tcpm_port *port, + union power_supply_propval *val) +{ + if (port->pps_data.active) + val->intval = port->pps_data.min_volt * 1000; + else + val->intval = port->supply_voltage * 1000; + + return 0; +} + +static int tcpm_psy_get_voltage_max(struct tcpm_port *port, + union power_supply_propval *val) +{ + if (port->pps_data.active) + val->intval = port->pps_data.max_volt * 1000; + else + val->intval = port->supply_voltage * 1000; + + return 0; +} + +static int tcpm_psy_get_voltage_now(struct tcpm_port *port, + union power_supply_propval *val) +{ + val->intval = port->supply_voltage * 1000; + + return 0; +} + +static int tcpm_psy_get_current_max(struct tcpm_port *port, + union power_supply_propval *val) +{ + if (port->pps_data.active) + val->intval = port->pps_data.max_curr * 1000; + else + val->intval = port->current_limit * 1000; + + return 0; +} + +static int tcpm_psy_get_current_now(struct tcpm_port *port, + union power_supply_propval *val) +{ + val->intval = port->current_limit * 1000; + + return 0; +} + +static int tcpm_psy_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct tcpm_port *port = power_supply_get_drvdata(psy); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_USB_TYPE: + val->intval = port->usb_type; + break; + case POWER_SUPPLY_PROP_ONLINE: + ret = tcpm_psy_get_online(port, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN: + ret = tcpm_psy_get_voltage_min(port, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + ret = tcpm_psy_get_voltage_max(port, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = tcpm_psy_get_voltage_now(port, val); + break; + case POWER_SUPPLY_PROP_CURRENT_MAX: + ret = tcpm_psy_get_current_max(port, val); + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = tcpm_psy_get_current_now(port, val); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int tcpm_psy_set_online(struct tcpm_port *port, + const union power_supply_propval *val) +{ + int ret; + + switch (val->intval) { + case TCPM_PSY_FIXED_ONLINE: + ret = tcpm_pps_activate(port, false); + break; + case TCPM_PSY_PROG_ONLINE: + ret = tcpm_pps_activate(port, true); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int tcpm_psy_set_prop(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct tcpm_port *port = power_supply_get_drvdata(psy); + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + ret = tcpm_psy_set_online(port, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (val->intval < port->pps_data.min_volt * 1000 || + val->intval > port->pps_data.max_volt * 1000) + ret = -EINVAL; + else + ret = tcpm_pps_set_out_volt(port, val->intval / 1000); + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (val->intval > port->pps_data.max_curr * 1000) + ret = -EINVAL; + else + ret = tcpm_pps_set_op_curr(port, val->intval / 1000); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int tcpm_psy_prop_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + case POWER_SUPPLY_PROP_CURRENT_NOW: + return 1; + default: + return 0; + } +} + +static enum power_supply_usb_type tcpm_psy_usb_types[] = { + POWER_SUPPLY_USB_TYPE_C, + POWER_SUPPLY_USB_TYPE_PD, + POWER_SUPPLY_USB_TYPE_PD_PPS, +}; + +static const char *tcpm_psy_name_prefix = "tcpm-source-psy-"; + +static int devm_tcpm_psy_register(struct tcpm_port *port) +{ + struct power_supply_config psy_cfg = {}; + const char *port_dev_name = dev_name(port->dev); + size_t psy_name_len = strlen(tcpm_psy_name_prefix) + + strlen(port_dev_name) + 1; + char *psy_name; + + psy_cfg.drv_data = port; + psy_cfg.fwnode = dev_fwnode(port->dev); + psy_name = devm_kzalloc(port->dev, psy_name_len, GFP_KERNEL); + if (!psy_name) + return -ENOMEM; + + snprintf(psy_name, psy_name_len, "%s%s", tcpm_psy_name_prefix, + port_dev_name); + port->psy_desc.name = psy_name; + port->psy_desc.type = POWER_SUPPLY_TYPE_USB, + port->psy_desc.usb_types = tcpm_psy_usb_types; + port->psy_desc.num_usb_types = ARRAY_SIZE(tcpm_psy_usb_types); + port->psy_desc.properties = tcpm_psy_props, + port->psy_desc.num_properties = ARRAY_SIZE(tcpm_psy_props), + port->psy_desc.get_property = tcpm_psy_get_prop, + port->psy_desc.set_property = tcpm_psy_set_prop, + port->psy_desc.property_is_writeable = tcpm_psy_prop_writeable, + + port->usb_type = POWER_SUPPLY_USB_TYPE_C; + + port->psy = devm_power_supply_register(port->dev, &port->psy_desc, + &psy_cfg); + + return PTR_ERR_OR_ZERO(port->psy); +} + struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) { struct tcpm_port *port; @@ -3631,6 +4553,7 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) init_completion(&port->tx_complete); init_completion(&port->swap_complete); + init_completion(&port->pps_complete); tcpm_debugfs_init(port); if (tcpm_validate_caps(port, tcpc->config->src_pdo, @@ -3647,9 +4570,6 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) port->nr_snk_vdo = tcpm_copy_vdos(port->snk_vdo, tcpc->config->snk_vdo, tcpc->config->nr_snk_vdo); - port->max_snk_mv = tcpc->config->max_snk_mv; - port->max_snk_ma = tcpc->config->max_snk_ma; - port->max_snk_mw = tcpc->config->max_snk_mw; port->operating_snk_mw = tcpc->config->operating_snk_mw; if (!tcpc->config->try_role_hw) port->try_role = tcpc->config->default_role; @@ -3660,7 +4580,7 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) port->typec_caps.type = tcpc->config->type; port->typec_caps.data = tcpc->config->data; port->typec_caps.revision = 0x0120; /* Type-C spec release 1.2 */ - port->typec_caps.pd_revision = 0x0200; /* USB-PD spec release 2.0 */ + port->typec_caps.pd_revision = 0x0300; /* USB-PD spec release 3.0 */ port->typec_caps.dr_set = tcpm_dr_set; port->typec_caps.pr_set = tcpm_pr_set; port->typec_caps.vconn_set = tcpm_vconn_set; @@ -3676,6 +4596,10 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) goto out_destroy_wq; } + err = devm_tcpm_psy_register(port); + if (err) + goto out_destroy_wq; + port->typec_port = typec_register_port(port->dev, &port->typec_caps); if (IS_ERR(port->typec_port)) { err = PTR_ERR(port->typec_port); diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb/typec/typec_wcove.c index 19cca7f1b2c5..423208e19383 100644 --- a/drivers/usb/typec/typec_wcove.c +++ b/drivers/usb/typec/typec_wcove.c @@ -202,6 +202,10 @@ static int wcove_init(struct tcpc_dev *tcpc) struct wcove_typec *wcove = tcpc_to_wcove(tcpc); int ret; + ret = regmap_write(wcove->regmap, USBC_CONTROL1, 0); + if (ret) + return ret; + /* Unmask everything */ ret = regmap_write(wcove->regmap, USBC_IRQMASK1, 0); if (ret) @@ -285,8 +289,30 @@ static int wcove_get_cc(struct tcpc_dev *tcpc, enum typec_cc_status *cc1, static int wcove_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc) { - /* XXX: Relying on the HW FSM to configure things correctly for now */ - return 0; + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + unsigned int ctrl; + + switch (cc) { + case TYPEC_CC_RD: + ctrl = USBC_CONTROL1_MODE_SNK; + break; + case TYPEC_CC_RP_DEF: + ctrl = USBC_CONTROL1_CURSRC_UA_80 | USBC_CONTROL1_MODE_SRC; + break; + case TYPEC_CC_RP_1_5: + ctrl = USBC_CONTROL1_CURSRC_UA_180 | USBC_CONTROL1_MODE_SRC; + break; + case TYPEC_CC_RP_3_0: + ctrl = USBC_CONTROL1_CURSRC_UA_330 | USBC_CONTROL1_MODE_SRC; + break; + case TYPEC_CC_OPEN: + ctrl = 0; + break; + default: + return -EINVAL; + } + + return regmap_write(wcove->regmap, USBC_CONTROL1, ctrl); } static int wcove_set_polarity(struct tcpc_dev *tcpc, enum typec_cc_polarity pol) @@ -558,6 +584,7 @@ static const u32 src_pdo[] = { static const u32 snk_pdo[] = { PDO_FIXED(5000, 500, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM), + PDO_VAR(5000, 12000, 3000), }; static struct tcpc_config wcove_typec_config = { @@ -566,9 +593,6 @@ static struct tcpc_config wcove_typec_config = { .snk_pdo = snk_pdo, .nr_snk_pdo = ARRAY_SIZE(snk_pdo), - .max_snk_mv = 12000, - .max_snk_ma = 3000, - .max_snk_mw = 36000, .operating_snk_mw = 15000, .type = TYPEC_PORT_DRP, diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c index 48808388ec33..be37aec250c2 100644 --- a/drivers/usb/usbip/vhci_sysfs.c +++ b/drivers/usb/usbip/vhci_sysfs.c @@ -10,6 +10,9 @@ #include <linux/platform_device.h> #include <linux/slab.h> +/* Hardening for Spectre-v1 */ +#include <linux/nospec.h> + #include "usbip_common.h" #include "vhci.h" @@ -205,16 +208,20 @@ static int vhci_port_disconnect(struct vhci_hcd *vhci_hcd, __u32 rhport) return 0; } -static int valid_port(__u32 pdev_nr, __u32 rhport) +static int valid_port(__u32 *pdev_nr, __u32 *rhport) { - if (pdev_nr >= vhci_num_controllers) { - pr_err("pdev %u\n", pdev_nr); + if (*pdev_nr >= vhci_num_controllers) { + pr_err("pdev %u\n", *pdev_nr); return 0; } - if (rhport >= VHCI_HC_PORTS) { - pr_err("rhport %u\n", rhport); + *pdev_nr = array_index_nospec(*pdev_nr, vhci_num_controllers); + + if (*rhport >= VHCI_HC_PORTS) { + pr_err("rhport %u\n", *rhport); return 0; } + *rhport = array_index_nospec(*rhport, VHCI_HC_PORTS); + return 1; } @@ -232,7 +239,7 @@ static ssize_t detach_store(struct device *dev, struct device_attribute *attr, pdev_nr = port_to_pdev_nr(port); rhport = port_to_rhport(port); - if (!valid_port(pdev_nr, rhport)) + if (!valid_port(&pdev_nr, &rhport)) return -EINVAL; hcd = platform_get_drvdata(vhcis[pdev_nr].pdev); @@ -258,7 +265,8 @@ static ssize_t detach_store(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR_WO(detach); -static int valid_args(__u32 pdev_nr, __u32 rhport, enum usb_device_speed speed) +static int valid_args(__u32 *pdev_nr, __u32 *rhport, + enum usb_device_speed speed) { if (!valid_port(pdev_nr, rhport)) { return 0; @@ -322,7 +330,7 @@ static ssize_t attach_store(struct device *dev, struct device_attribute *attr, sockfd, devid, speed); /* check received parameters */ - if (!valid_args(pdev_nr, rhport, speed)) + if (!valid_args(&pdev_nr, &rhport, speed)) return -EINVAL; hcd = platform_get_drvdata(vhcis[pdev_nr].pdev); |