Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c-core: Some style cleanups
  i2c-piix4: Add support for the Broadcom HT1100 chipset
  i2c-piix4: Add support to SB800 SMBus changes
  i2c-pca-platform: Use defaults if no platform_data given
  i2c-algo-pca: Use timeout for checking the state machine
  i2c-algo-pca: Rework waiting for a free bus
  i2c-algo-pca: Add PCA9665 support
  i2c: Adapt debug macros for KERN_* constants
  i2c-davinci: Fix timeout handling
  i2c: Adapter timeout is in jiffies
  i2c: Set a default timeout value for all adapters
  i2c: Add missing KERN_* constants to printks
  i2c-algo-pcf: Handle timeout correctly
  i2c-algo-pcf: Style cleanups
  eeprom/at24: Remove EXPERIMENTAL
  i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79
  i2c: Clarify which clients are auto-removed
  i2c: Let checkpatch shout on users of the legacy model
  i2c: Document the different ways to instantiate i2c devices

17 files changed, 515 insertions, 262 deletions

diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index eb8f72ca02f4..d420cc5f5633 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -604,9 +604,7 @@ static int i2c_bit_prepare_bus(struct i2c_adapter *adap)
 
 	/* register new adapter to i2c module... */
 	adap->algo = &i2c_bit_algo;
-
-	adap->timeout = 100;	/* default values, should	*/
-	adap->retries = 3;	/* be replaced by defines	*/
+	adap->retries = 3;
 
 	return 0;
 }
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index d50b329a3c94..f68e5f8e23ee 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -22,14 +22,18 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/delay.h>
+#include <linux/jiffies.h>
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-pca.h>
 
-#define DEB1(fmt, args...) do { if (i2c_debug>=1) printk(fmt, ## args); } while(0)
-#define DEB2(fmt, args...) do { if (i2c_debug>=2) printk(fmt, ## args); } while(0)
-#define DEB3(fmt, args...) do { if (i2c_debug>=3) printk(fmt, ## args); } while(0)
+#define DEB1(fmt, args...) do { if (i2c_debug >= 1)			\
+				 printk(KERN_DEBUG fmt, ## args); } while (0)
+#define DEB2(fmt, args...) do { if (i2c_debug >= 2)			\
+				 printk(KERN_DEBUG fmt, ## args); } while (0)
+#define DEB3(fmt, args...) do { if (i2c_debug >= 3)			\
+				 printk(KERN_DEBUG fmt, ## args); } while (0)
 
 static int i2c_debug;
 
@@ -43,19 +47,27 @@ static int i2c_debug;
 #define pca_wait(adap) adap->wait_for_completion(adap->data)
 #define pca_reset(adap) adap->reset_chip(adap->data)
 
+static void pca9665_reset(void *pd)
+{
+	struct i2c_algo_pca_data *adap = pd;
+	pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET);
+	pca_outw(adap, I2C_PCA_IND, 0xA5);
+	pca_outw(adap, I2C_PCA_IND, 0x5A);
+}
+
 /*
  * Generate a start condition on the i2c bus.
  *
  * returns after the start condition has occurred
  */
-static void pca_start(struct i2c_algo_pca_data *adap)
+static int pca_start(struct i2c_algo_pca_data *adap)
 {
 	int sta = pca_get_con(adap);
 	DEB2("=== START\n");
 	sta |= I2C_PCA_CON_STA;
 	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_SI);
 	pca_set_con(adap, sta);
-	pca_wait(adap);
+	return pca_wait(adap);
 }
 
 /*
@@ -63,14 +75,14 @@ static void pca_start(struct i2c_algo_pca_data *adap)
  *
  * return after the repeated start condition has occurred
  */
-static void pca_repeated_start(struct i2c_algo_pca_data *adap)
+static int pca_repeated_start(struct i2c_algo_pca_data *adap)
 {
 	int sta = pca_get_con(adap);
 	DEB2("=== REPEATED START\n");
 	sta |= I2C_PCA_CON_STA;
 	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_SI);
 	pca_set_con(adap, sta);
-	pca_wait(adap);
+	return pca_wait(adap);
 }
 
 /*
@@ -96,7 +108,7 @@ static void pca_stop(struct i2c_algo_pca_data *adap)
  *
  * returns after the address has been sent
  */
-static void pca_address(struct i2c_algo_pca_data *adap,
+static int pca_address(struct i2c_algo_pca_data *adap,
 			struct i2c_msg *msg)
 {
 	int sta = pca_get_con(adap);
@@ -113,7 +125,7 @@ static void pca_address(struct i2c_algo_pca_data *adap,
 	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI);
 	pca_set_con(adap, sta);
 
-	pca_wait(adap);
+	return pca_wait(adap);
 }
 
 /*
@@ -121,7 +133,7 @@ static void pca_address(struct i2c_algo_pca_data *adap,
  *
  * Returns after the byte has been transmitted
  */
-static void pca_tx_byte(struct i2c_algo_pca_data *adap,
+static int pca_tx_byte(struct i2c_algo_pca_data *adap,
 			__u8 b)
 {
 	int sta = pca_get_con(adap);
@@ -131,7 +143,7 @@ static void pca_tx_byte(struct i2c_algo_pca_data *adap,
 	sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI);
 	pca_set_con(adap, sta);
 
-	pca_wait(adap);
+	return pca_wait(adap);
 }
 
 /*
@@ -151,7 +163,7 @@ static void pca_rx_byte(struct i2c_algo_pca_data *adap,
  *
  * Returns after next byte has arrived.
  */
-static void pca_rx_ack(struct i2c_algo_pca_data *adap,
+static int pca_rx_ack(struct i2c_algo_pca_data *adap,
 		       int ack)
 {
 	int sta = pca_get_con(adap);
@@ -162,7 +174,7 @@ static void pca_rx_ack(struct i2c_algo_pca_data *adap,
 		sta |= I2C_PCA_CON_AA;
 
 	pca_set_con(adap, sta);
-	pca_wait(adap);
+	return pca_wait(adap);
 }
 
 static int pca_xfer(struct i2c_adapter *i2c_adap,
@@ -175,14 +187,17 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 	int numbytes = 0;
 	int state;
 	int ret;
-	int timeout = i2c_adap->timeout;
-
-	while ((state = pca_status(adap)) != 0xf8 && timeout--) {
-		msleep(10);
-	}
-	if (state != 0xf8) {
-		dev_dbg(&i2c_adap->dev, "bus is not idle. status is %#04x\n", state);
-		return -EAGAIN;
+	int completed = 1;
+	unsigned long timeout = jiffies + i2c_adap->timeout;
+
+	while (pca_status(adap) != 0xf8) {
+		if (time_before(jiffies, timeout)) {
+			msleep(10);
+		} else {
+			dev_dbg(&i2c_adap->dev, "bus is not idle. status is "
+				"%#04x\n", state);
+			return -EAGAIN;
+		}
 	}
 
 	DEB1("{{{ XFER %d messages\n", num);
@@ -218,18 +233,19 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 
 		switch (state) {
 		case 0xf8: /* On reset or stop the bus is idle */
-			pca_start(adap);
+			completed = pca_start(adap);
 			break;
 
 		case 0x08: /* A START condition has been transmitted */
 		case 0x10: /* A repeated start condition has been transmitted */
-			pca_address(adap, msg);
+			completed = pca_address(adap, msg);
 			break;
 
 		case 0x18: /* SLA+W has been transmitted; ACK has been received */
 		case 0x28: /* Data byte in I2CDAT has been transmitted; ACK has been received */
 			if (numbytes < msg->len) {
-				pca_tx_byte(adap, msg->buf[numbytes]);
+				completed = pca_tx_byte(adap,
+							msg->buf[numbytes]);
 				numbytes++;
 				break;
 			}
@@ -237,7 +253,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 			if (curmsg == num)
 				pca_stop(adap);
 			else
-				pca_repeated_start(adap);
+				completed = pca_repeated_start(adap);
 			break;
 
 		case 0x20: /* SLA+W has been transmitted; NOT ACK has been received */
@@ -246,21 +262,22 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 			goto out;
 
 		case 0x40: /* SLA+R has been transmitted; ACK has been received */
-			pca_rx_ack(adap, msg->len > 1);
+			completed = pca_rx_ack(adap, msg->len > 1);
 			break;
 
 		case 0x50: /* Data bytes has been received; ACK has been returned */
 			if (numbytes < msg->len) {
 				pca_rx_byte(adap, &msg->buf[numbytes], 1);
 				numbytes++;
-				pca_rx_ack(adap, numbytes < msg->len - 1);
+				completed = pca_rx_ack(adap,
+						       numbytes < msg->len - 1);
 				break;
 			}
 			curmsg++; numbytes = 0;
 			if (curmsg == num)
 				pca_stop(adap);
 			else
-				pca_repeated_start(adap);
+				completed = pca_repeated_start(adap);
 			break;
 
 		case 0x48: /* SLA+R has been transmitted; NOT ACK has been received */
@@ -283,7 +300,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 				if (curmsg == num)
 					pca_stop(adap);
 				else
-					pca_repeated_start(adap);
+					completed = pca_repeated_start(adap);
 			} else {
 				DEB2("NOT ACK sent after data byte received. "
 				     "Not final byte. numbytes %d. len %d\n",
@@ -309,11 +326,13 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 			break;
 		}
 
+		if (!completed)
+			goto out;
 	}
 
 	ret = curmsg;
  out:
-	DEB1(KERN_CRIT "}}} transfered %d/%d messages. "
+	DEB1("}}} transfered %d/%d messages. "
 	     "status is %#04x. control is %#04x\n",
 	     curmsg, num, pca_status(adap),
 	     pca_get_con(adap));
@@ -330,26 +349,171 @@ static const struct i2c_algorithm pca_algo = {
 	.functionality	= pca_func,
 };
 
-static int pca_init(struct i2c_adapter *adap)
+static unsigned int pca_probe_chip(struct i2c_adapter *adap)
 {
-	static int freqs[] = {330,288,217,146,88,59,44,36};
-	int clock;
 	struct i2c_algo_pca_data *pca_data = adap->algo_data;
-
-	if (pca_data->i2c_clock > 7) {
-		printk(KERN_WARNING "%s: Invalid I2C clock speed selected. Trying default.\n",
-			adap->name);
-		pca_data->i2c_clock = I2C_PCA_CON_59kHz;
+	/* The trick here is to check if there is an indirect register
+	 * available. If there is one, we will read the value we first
+	 * wrote on I2C_PCA_IADR. Otherwise, we will read the last value
+	 * we wrote on I2C_PCA_ADR
+	 */
+	pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IADR);
+	pca_outw(pca_data, I2C_PCA_IND, 0xAA);
+	pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ITO);
+	pca_outw(pca_data, I2C_PCA_IND, 0x00);
+	pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IADR);
+	if (pca_inw(pca_data, I2C_PCA_IND) == 0xAA) {
+		printk(KERN_INFO "%s: PCA9665 detected.\n", adap->name);
+		return I2C_PCA_CHIP_9665;
+	} else {
+		printk(KERN_INFO "%s: PCA9564 detected.\n", adap->name);
+		return I2C_PCA_CHIP_9564;
 	}
+}
+
+static int pca_init(struct i2c_adapter *adap)
+{
+	struct i2c_algo_pca_data *pca_data = adap->algo_data;
 
 	adap->algo = &pca_algo;
 
-	pca_reset(pca_data);
+	if (pca_probe_chip(adap) == I2C_PCA_CHIP_9564) {
+		static int freqs[] = {330, 288, 217, 146, 88, 59, 44, 36};
+		int clock;
+
+		if (pca_data->i2c_clock > 7) {
+			switch (pca_data->i2c_clock) {
+			case 330000:
+				pca_data->i2c_clock = I2C_PCA_CON_330kHz;
+				break;
+			case 288000:
+				pca_data->i2c_clock = I2C_PCA_CON_288kHz;
+				break;
+			case 217000:
+				pca_data->i2c_clock = I2C_PCA_CON_217kHz;
+				break;
+			case 146000:
+				pca_data->i2c_clock = I2C_PCA_CON_146kHz;
+				break;
+			case 88000:
+				pca_data->i2c_clock = I2C_PCA_CON_88kHz;
+				break;
+			case 59000:
+				pca_data->i2c_clock = I2C_PCA_CON_59kHz;
+				break;
+			case 44000:
+				pca_data->i2c_clock = I2C_PCA_CON_44kHz;
+				break;
+			case 36000:
+				pca_data->i2c_clock = I2C_PCA_CON_36kHz;
+				break;
+			default:
+				printk(KERN_WARNING
+					"%s: Invalid I2C clock speed selected."
+					" Using default 59kHz.\n", adap->name);
+			pca_data->i2c_clock = I2C_PCA_CON_59kHz;
+			}
+		} else {
+			printk(KERN_WARNING "%s: "
+				"Choosing the clock frequency based on "
+				"index is deprecated."
+				" Use the nominal frequency.\n", adap->name);
+		}
+
+		pca_reset(pca_data);
+
+		clock = pca_clock(pca_data);
+		printk(KERN_INFO "%s: Clock frequency is %dkHz\n",
+		     adap->name, freqs[clock]);
+
+		pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock);
+	} else {
+		int clock;
+		int mode;
+		int tlow, thi;
+		/* Values can be found on PCA9665 datasheet section 7.3.2.6 */
+		int min_tlow, min_thi;
+		/* These values are the maximum raise and fall values allowed
+		 * by the I2C operation mode (Standard, Fast or Fast+)
+		 * They are used (added) below to calculate the clock dividers
+		 * of PCA9665. Note that they are slightly different of the
+		 * real maximum, to allow the change on mode exactly on the
+		 * maximum clock rate for each mode
+		 */
+		int raise_fall_time;
+
+		struct i2c_algo_pca_data *pca_data = adap->algo_data;
+
+		/* Ignore the reset function from the module,
+		 * we can use the parallel bus reset
+		 */
+		pca_data->reset_chip = pca9665_reset;
+
+		if (pca_data->i2c_clock > 1265800) {
+			printk(KERN_WARNING "%s: I2C clock speed too high."
+				" Using 1265.8kHz.\n", adap->name);
+			pca_data->i2c_clock = 1265800;
+		}
+
+		if (pca_data->i2c_clock < 60300) {
+			printk(KERN_WARNING "%s: I2C clock speed too low."
+				" Using 60.3kHz.\n", adap->name);
+			pca_data->i2c_clock = 60300;
+		}
 
-	clock = pca_clock(pca_data);
-	DEB1(KERN_INFO "%s: Clock frequency is %dkHz\n", adap->name, freqs[clock]);
+		/* To avoid integer overflow, use clock/100 for calculations */
+		clock = pca_clock(pca_data) / 100;
+
+		if (pca_data->i2c_clock > 10000) {
+			mode = I2C_PCA_MODE_TURBO;
+			min_tlow = 14;
+			min_thi  = 5;
+			raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
+		} else if (pca_data->i2c_clock > 4000) {
+			mode = I2C_PCA_MODE_FASTP;
+			min_tlow = 17;
+			min_thi  = 9;
+			raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
+		} else if (pca_data->i2c_clock > 1000) {
+			mode = I2C_PCA_MODE_FAST;
+			min_tlow = 44;
+			min_thi  = 20;
+			raise_fall_time = 58; /* Raise 29e-8s, Fall 29e-8s */
+		} else {
+			mode = I2C_PCA_MODE_STD;
+			min_tlow = 157;
+			min_thi  = 134;
+			raise_fall_time = 127; /* Raise 29e-8s, Fall 98e-8s */
+		}
+
+		/* The minimum clock that respects the thi/tlow = 134/157 is
+		 * 64800 Hz. Below that, we have to fix the tlow to 255 and
+		 * calculate the thi factor.
+		 */
+		if (clock < 648) {
+			tlow = 255;
+			thi = 1000000 - clock * raise_fall_time;
+			thi /= (I2C_PCA_OSC_PER * clock) - tlow;
+		} else {
+			tlow = (1000000 - clock * raise_fall_time) * min_tlow;
+			tlow /= I2C_PCA_OSC_PER * clock * (min_thi + min_tlow);
+			thi = tlow * min_thi / min_tlow;
+		}
 
-	pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock);
+		pca_reset(pca_data);
+
+		printk(KERN_INFO
+		     "%s: Clock frequency is %dHz\n", adap->name, clock * 100);
+
+		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IMODE);
+		pca_outw(pca_data, I2C_PCA_IND, mode);
+		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
+		pca_outw(pca_data, I2C_PCA_IND, tlow);
+		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
+		pca_outw(pca_data, I2C_PCA_IND, thi);
+
+		pca_set_con(pca_data, I2C_PCA_CON_ENSIO);
+	}
 	udelay(500); /* 500 us for oscilator to stabilise */
 
 	return 0;
@@ -384,7 +548,7 @@ EXPORT_SYMBOL(i2c_pca_add_numbered_bus);
 
 MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>, "
 	"Wolfram Sang <w.sang@pengutronix.de>");
-MODULE_DESCRIPTION("I2C-Bus PCA9564 algorithm");
+MODULE_DESCRIPTION("I2C-Bus PCA9564/PCA9665 algorithm");
 MODULE_LICENSE("GPL");
 
 module_param(i2c_debug, int, 0);
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 3e01992230b8..7ce75775ec73 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -1,31 +1,30 @@
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-pcf.c i2c driver algorithms for PCF8584 adapters		     */
-/* ------------------------------------------------------------------------- */
-/*   Copyright (C) 1995-1997 Simon G. Vogl
-                   1998-2000 Hans Berglund
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
-   Frodo Looijaard <frodol@dds.nl> ,and also from Martin Bailey
-   <mbailey@littlefeet-inc.com> */
-
-/* Partially rewriten by Oleg I. Vdovikin <vdovikin@jscc.ru> to handle multiple
-   messages, proper stop/repstart signaling during receive,
-   added detect code */
+/*
+ * i2c-algo-pcf.c i2c driver algorithms for PCF8584 adapters
+ *
+ *   Copyright (C) 1995-1997 Simon G. Vogl
+ *		   1998-2000 Hans Berglund
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
+ * Frodo Looijaard <frodol@dds.nl>, and also from Martin Bailey
+ * <mbailey@littlefeet-inc.com>
+ *
+ * Partially rewriten by Oleg I. Vdovikin <vdovikin@jscc.ru> to handle multiple
+ * messages, proper stop/repstart signaling during receive, added detect code
+ */
 
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -38,17 +37,18 @@
 #include "i2c-algo-pcf.h"
 
 
-#define DEB2(x) if (i2c_debug>=2) x
-#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/
-#define DEBPROTO(x) if (i2c_debug>=9) x;
- 	/* debug the protocol by showing transferred bits */
+#define DEB2(x) if (i2c_debug >= 2) x
+#define DEB3(x) if (i2c_debug >= 3) x /* print several statistical values */
+#define DEBPROTO(x) if (i2c_debug >= 9) x;
+	/* debug the protocol by showing transferred bits */
 #define DEF_TIMEOUT 16
 
-/* module parameters:
+/*
+ * module parameters:
  */
 static int i2c_debug;
 
-/* --- setting states on the bus with the right timing: ---------------	*/
+/* setting states on the bus with the right timing: */
 
 #define set_pcf(adap, ctl, val) adap->setpcf(adap->data, ctl, val)
 #define get_pcf(adap, ctl) adap->getpcf(adap->data, ctl)
@@ -57,22 +57,21 @@ static int i2c_debug;
 #define i2c_outb(adap, val) adap->setpcf(adap->data, 0, val)
 #define i2c_inb(adap) adap->getpcf(adap->data, 0)
 
-/* --- other auxiliary functions --------------------------------------	*/
+/* other auxiliary functions */
 
-static void i2c_start(struct i2c_algo_pcf_data *adap) 
+static void i2c_start(struct i2c_algo_pcf_data *adap)
 {
-	DEBPROTO(printk("S "));
+	DEBPROTO(printk(KERN_DEBUG "S "));
 	set_pcf(adap, 1, I2C_PCF_START);
 }
 
-static void i2c_repstart(struct i2c_algo_pcf_data *adap) 
+static void i2c_repstart(struct i2c_algo_pcf_data *adap)
 {
 	DEBPROTO(printk(" Sr "));
 	set_pcf(adap, 1, I2C_PCF_REPSTART);
 }
 
-
-static void i2c_stop(struct i2c_algo_pcf_data *adap) 
+static void i2c_stop(struct i2c_algo_pcf_data *adap)
 {
 	DEBPROTO(printk("P\n"));
 	set_pcf(adap, 1, I2C_PCF_STOP);
@@ -82,17 +81,17 @@ static void handle_lab(struct i2c_algo_pcf_data *adap, const int *status)
 {
 	DEB2(printk(KERN_INFO
 		"i2c-algo-pcf.o: lost arbitration (CSR 0x%02x)\n",
-		 *status));
-
-	/* Cleanup from LAB -- reset and enable ESO.
+		*status));
+	/*
+	 * Cleanup from LAB -- reset and enable ESO.
 	 * This resets the PCF8584; since we've lost the bus, no
 	 * further attempts should be made by callers to clean up
 	 * (no i2c_stop() etc.)
 	 */
 	set_pcf(adap, 1, I2C_PCF_PIN);
 	set_pcf(adap, 1, I2C_PCF_ESO);
-
-	/* We pause for a time period sufficient for any running
+	/*
+	 * We pause for a time period sufficient for any running
 	 * I2C transaction to complete -- the arbitration logic won't
 	 * work properly until the next START is seen.
 	 * It is assumed the bus driver or client has set a proper value.
@@ -108,48 +107,50 @@ static void handle_lab(struct i2c_algo_pcf_data *adap, const int *status)
 		get_pcf(adap, 1)));
 }
 
-static int wait_for_bb(struct i2c_algo_pcf_data *adap) {
+static int wait_for_bb(struct i2c_algo_pcf_data *adap)
+{
 
 	int timeout = DEF_TIMEOUT;
 	int status;
 
 	status = get_pcf(adap, 1);
-#ifndef STUB_I2C
-	while (timeout-- && !(status & I2C_PCF_BB)) {
+
+	while (!(status & I2C_PCF_BB) && --timeout) {
 		udelay(100); /* wait for 100 us */
 		status = get_pcf(adap, 1);
 	}
-#endif
-	if (timeout <= 0) {
+
+	if (timeout == 0) {
 		printk(KERN_ERR "Timeout waiting for Bus Busy\n");
+		return -ETIMEDOUT;
 	}
-	
-	return (timeout<=0);
-}
 
+	return 0;
+}
 
-static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) {
+static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status)
+{
 
 	int timeout = DEF_TIMEOUT;
 
 	*status = get_pcf(adap, 1);
-#ifndef STUB_I2C
-	while (timeout-- && (*status & I2C_PCF_PIN)) {
+
+	while ((*status & I2C_PCF_PIN) && --timeout) {
 		adap->waitforpin(adap->data);
 		*status = get_pcf(adap, 1);
 	}
 	if (*status & I2C_PCF_LAB) {
 		handle_lab(adap, status);
-		return(-EINTR);
+		return -EINTR;
 	}
-#endif
-	if (timeout <= 0)
-		return(-1);
-	else
-		return(0);
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	return 0;
 }
 
-/* 
+/*
  * This should perform the 'PCF8584 initialization sequence' as described
  * in the Philips IC12 data book (1995, Aug 29).
  * There should be a 30 clock cycle wait after reset, I assume this
@@ -164,18 +165,21 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 {
 	unsigned char temp;
 
-	DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: PCF state 0x%02x\n", get_pcf(adap, 1)));
+	DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: PCF state 0x%02x\n",
+				get_pcf(adap, 1)));
 
 	/* S1=0x80: S0 selected, serial interface off */
 	set_pcf(adap, 1, I2C_PCF_PIN);
-	/* check to see S1 now used as R/W ctrl -
-	   PCF8584 does that when ESO is zero */
+	/*
+	 * check to see S1 now used as R/W ctrl -
+	 * PCF8584 does that when ESO is zero
+	 */
 	if (((temp = get_pcf(adap, 1)) & 0x7f) != (0)) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp));
 		return -ENXIO; /* definetly not PCF8584 */
 	}
 
-	/* load own address in S0, effective address is (own << 1)	*/
+	/* load own address in S0, effective address is (own << 1) */
 	i2c_outb(adap, get_own(adap));
 	/* check it's really written */
 	if ((temp = i2c_inb(adap)) != get_own(adap)) {
@@ -183,7 +187,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 		return -ENXIO;
 	}
 
-	/* S1=0xA0, next byte in S2					*/
+	/* S1=0xA0, next byte in S2 */
 	set_pcf(adap, 1, I2C_PCF_PIN | I2C_PCF_ES1);
 	/* check to see S2 now selected */
 	if (((temp = get_pcf(adap, 1)) & 0x7f) != I2C_PCF_ES1) {
@@ -191,7 +195,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 		return -ENXIO;
 	}
 
-	/* load clock register S2					*/
+	/* load clock register S2 */
 	i2c_outb(adap, get_clock(adap));
 	/* check it's really written, the only 5 lowest bits does matter */
 	if (((temp = i2c_inb(adap)) & 0x1f) != get_clock(adap)) {
@@ -199,7 +203,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 		return -ENXIO;
 	}
 
-	/* Enable serial interface, idle, S0 selected			*/
+	/* Enable serial interface, idle, S0 selected */
 	set_pcf(adap, 1, I2C_PCF_IDLE);
 
 	/* check to see PCF is really idled and we can access status register */
@@ -207,57 +211,47 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S1` (0x%02x).\n", temp));
 		return -ENXIO;
 	}
-	
+
 	printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n");
 
 	return 0;
 }
 
-
-/* ----- Utility functions
- */
-
 static int pcf_sendbytes(struct i2c_adapter *i2c_adap, const char *buf,
-                         int count, int last)
+			 int count, int last)
 {
 	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
 	int wrcount, status, timeout;
-    
+
 	for (wrcount=0; wrcount<count; ++wrcount) {
 		DEB2(dev_dbg(&i2c_adap->dev, "i2c_write: writing %2.2X\n",
-				buf[wrcount]&0xff));
+				buf[wrcount] & 0xff));
 		i2c_outb(adap, buf[wrcount]);
 		timeout = wait_for_pin(adap, &status);
 		if (timeout) {
-			if (timeout == -EINTR) {
-				/* arbitration lost */
-				return -EINTR;
-			}
+			if (timeout == -EINTR)
+				return -EINTR; /* arbitration lost */
+
 			i2c_stop(adap);
 			dev_err(&i2c_adap->dev, "i2c_write: error - timeout.\n");
 			return -EREMOTEIO; /* got a better one ?? */
 		}
-#ifndef STUB_I2C
 		if (status & I2C_PCF_LRB) {
 			i2c_stop(adap);
 			dev_err(&i2c_adap->dev, "i2c_write: error - no ack.\n");
 			return -EREMOTEIO; /* got a better one ?? */
 		}
-#endif
 	}
-	if (last) {
+	if (last)
 		i2c_stop(adap);
-	}
-	else {
+	else
 		i2c_repstart(adap);
-	}
 
-	return (wrcount);
+	return wrcount;
 }
 
-
 static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
-                         int count, int last)
+			 int count, int last)
 {
 	int i, status;
 	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
@@ -267,42 +261,36 @@ static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
 	for (i = 0; i <= count; i++) {
 
 		if ((wfp = wait_for_pin(adap, &status))) {
-			if (wfp == -EINTR) {
-				/* arbitration lost */
-				return -EINTR;
-			}
+			if (wfp == -EINTR)
+				return -EINTR; /* arbitration lost */
+
 			i2c_stop(adap);
 			dev_err(&i2c_adap->dev, "pcf_readbytes timed out.\n");
-			return (-1);
+			return -1;
 		}
 
-#ifndef STUB_I2C
 		if ((status & I2C_PCF_LRB) && (i != count)) {
 			i2c_stop(adap);
 			dev_err(&i2c_adap->dev, "i2c_read: i2c_inb, No ack.\n");
-			return (-1);
+			return -1;
 		}
-#endif
-		
+
 		if (i == count - 1) {
 			set_pcf(adap, 1, I2C_PCF_ESO);
-		} else 
-		if (i == count) {
-			if (last) {
+		} else if (i == count) {
+			if (last)
 				i2c_stop(adap);
-			} else {
+			else
 				i2c_repstart(adap);
-			}
-		};
+		}
 
-		if (i) {
+		if (i)
 			buf[i - 1] = i2c_inb(adap);
-		} else {
+		else
 			i2c_inb(adap); /* dummy read */
-		}
 	}
 
-	return (i - 1);
+	return i - 1;
 }
 
 
@@ -323,14 +311,14 @@ static int pcf_doAddress(struct i2c_algo_pcf_data *adap,
 }
 
 static int pcf_xfer(struct i2c_adapter *i2c_adap,
-		    struct i2c_msg *msgs, 
+		    struct i2c_msg *msgs,
 		    int num)
 {
 	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
 	struct i2c_msg *pmsg;
 	int i;
 	int ret=0, timeout, status;
-    
+
 	if (adap->xfer_begin)
 		adap->xfer_begin(adap->data);
 
@@ -338,25 +326,24 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 	timeout = wait_for_bb(adap);
 	if (timeout) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: "
-		            "Timeout waiting for BB in pcf_xfer\n");)
+			    "Timeout waiting for BB in pcf_xfer\n");)
 		i = -EIO;
 		goto out;
 	}
-	
+
 	for (i = 0;ret >= 0 && i < num; i++) {
 		pmsg = &msgs[i];
 
 		DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: Doing %s %d bytes to 0x%02x - %d of %d messages\n",
 		     pmsg->flags & I2C_M_RD ? "read" : "write",
-                     pmsg->len, pmsg->addr, i + 1, num);)
-    
+		     pmsg->len, pmsg->addr, i + 1, num);)
+
 		ret = pcf_doAddress(adap, pmsg);
 
 		/* Send START */
-		if (i == 0) {
-			i2c_start(adap); 
-		}
-    
+		if (i == 0)
+			i2c_start(adap);
+
 		/* Wait for PIN (pending interrupt NOT) */
 		timeout = wait_for_pin(adap, &status);
 		if (timeout) {
@@ -371,8 +358,7 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 			i = -EREMOTEIO;
 			goto out;
 		}
-    
-#ifndef STUB_I2C
+
 		/* Check LRB (last rcvd bit - slave ack) */
 		if (status & I2C_PCF_LRB) {
 			i2c_stop(adap);
@@ -380,27 +366,24 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 			i = -EREMOTEIO;
 			goto out;
 		}
-#endif
-    
+
 		DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: Msg %d, addr=0x%x, flags=0x%x, len=%d\n",
 			    i, msgs[i].addr, msgs[i].flags, msgs[i].len);)
-    
-		/* Read */
+
 		if (pmsg->flags & I2C_M_RD) {
-			/* read bytes into buffer*/
 			ret = pcf_readbytes(i2c_adap, pmsg->buf, pmsg->len,
-                                            (i + 1 == num));
-        
+					    (i + 1 == num));
+
 			if (ret != pmsg->len) {
 				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: "
 					    "only read %d bytes.\n",ret));
 			} else {
 				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: read %d bytes.\n",ret));
 			}
-		} else { /* Write */
+		} else {
 			ret = pcf_sendbytes(i2c_adap, pmsg->buf, pmsg->len,
-                                            (i + 1 == num));
-        
+					    (i + 1 == num));
+
 			if (ret != pmsg->len) {
 				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: "
 					    "only wrote %d bytes.\n",ret));
@@ -413,24 +396,23 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 out:
 	if (adap->xfer_end)
 		adap->xfer_end(adap->data);
-	return (i);
+	return i;
 }
 
 static u32 pcf_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | 
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
 	       I2C_FUNC_PROTOCOL_MANGLING;
 }
 
-/* -----exported algorithm data: -------------------------------------	*/
-
+/* exported algorithm data: */
 static const struct i2c_algorithm pcf_algo = {
 	.master_xfer	= pcf_xfer,
 	.functionality	= pcf_func,
 };
 
-/* 
- * registering functions to load algorithms at runtime 
+/*
+ * registering functions to load algorithms at runtime
  */
 int i2c_pcf_add_bus(struct i2c_adapter *adap)
 {
@@ -441,7 +423,6 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap)
 
 	/* register new adapter to i2c module... */
 	adap->algo = &pcf_algo;
-	adap->timeout = 100;
 
 	if ((rval = pcf_init_8584(pcf_adap)))
 		return rval;
@@ -458,4 +439,4 @@ MODULE_LICENSE("GPL");
 
 module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(i2c_debug,
-        "debug level - 0 off; 1 normal; 2,3 more verbose; 9 pcf-protocol");
+	"debug level - 0 off; 1 normal; 2,3 more verbose; 9 pcf-protocol");
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 7f95905bbb9d..da809ad0996a 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -132,6 +132,7 @@ config I2C_PIIX4
 	    Serverworks CSB5
 	    Serverworks CSB6
 	    Serverworks HT-1000
+	    Serverworks HT-1100
 	    SMSC Victory66
 
 	  This driver can also be built as a module.  If so, the module
@@ -617,12 +618,12 @@ config I2C_ELEKTOR
 	  will be called i2c-elektor.
 
 config I2C_PCA_ISA
-	tristate "PCA9564 on an ISA bus"
+	tristate "PCA9564/PCA9665 on an ISA bus"
 	depends on ISA
 	select I2C_ALGOPCA
 	default n
 	help
-	  This driver supports ISA boards using the Philips PCA9564
+	  This driver supports ISA boards using the Philips PCA9564/PCA9665
 	  parallel bus to I2C bus controller.
 
 	  This driver can also be built as a module.  If so, the module
@@ -634,11 +635,11 @@ config I2C_PCA_ISA
 	  time).  If unsure, say N.
 
 config I2C_PCA_PLATFORM
-	tristate "PCA9564 as platform device"
+	tristate "PCA9564/PCA9665 as platform device"
 	select I2C_ALGOPCA
 	default n
 	help
-	  This driver supports a memory mapped Philips PCA9564
+	  This driver supports a memory mapped Philips PCA9564/PCA9665
 	  parallel bus to I2C bus controller.
 
 	  This driver can also be built as a module.  If so, the module
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 5d7789834b95..3fae3a91ce5b 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -216,7 +216,7 @@ static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev,
 {
 	unsigned long timeout;
 
-	timeout = jiffies + DAVINCI_I2C_TIMEOUT;
+	timeout = jiffies + dev->adapter.timeout;
 	while (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG)
 	       & DAVINCI_I2C_STR_BB) {
 		if (time_after(jiffies, timeout)) {
@@ -289,7 +289,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
 
 	r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
-						      DAVINCI_I2C_TIMEOUT);
+						      dev->adapter.timeout);
 	if (r == 0) {
 		dev_err(dev->dev, "controller timed out\n");
 		i2c_davinci_init(dev);
@@ -546,9 +546,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name));
 	adap->algo = &i2c_davinci_algo;
 	adap->dev.parent = &pdev->dev;
-
-	/* FIXME */
-	adap->timeout = 1;
+	adap->timeout = DAVINCI_I2C_TIMEOUT;
 
 	adap->nr = pdev->id;
 	r = i2c_add_numbered_adapter(adap);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 88f0db73b364..8b92a4666e02 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -415,7 +415,7 @@ static int iic_wait_for_tc(struct ibm_iic_private* dev){
 	if (dev->irq >= 0){
 		/* Interrupt mode */
 		ret = wait_event_interruptible_timeout(dev->wq,
-			!(in_8(&iic->sts) & STS_PT), dev->adap.timeout * HZ);
+			!(in_8(&iic->sts) & STS_PT), dev->adap.timeout);
 
 		if (unlikely(ret < 0))
 			DBG("%d: wait interrupted\n", dev->idx);
@@ -426,7 +426,7 @@ static int iic_wait_for_tc(struct ibm_iic_private* dev){
 	}
 	else {
 		/* Polling mode */
-		unsigned long x = jiffies + dev->adap.timeout * HZ;
+		unsigned long x = jiffies + dev->adap.timeout;
 
 		while (in_8(&iic->sts) & STS_PT){
 			if (unlikely(time_after(jiffies, x))){
@@ -748,7 +748,7 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	i2c_set_adapdata(adap, dev);
 	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->algo = &iic_algo;
-	adap->timeout = 1;
+	adap->timeout = HZ;
 
 	ret = i2c_add_adapter(adap);
 	if (ret  < 0) {
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 3190690c26ce..a75c75e77b92 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -488,7 +488,7 @@ iop3xx_i2c_probe(struct platform_device *pdev)
 	/*
 	 * Default values...should these come in from board code?
 	 */
-	new_adapter->timeout = 100;	
+	new_adapter->timeout = HZ;
 	new_adapter->algo = &iop3xx_i2c_algo;
 
 	init_waitqueue_head(&adapter_data->waitq);
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index aedbbe6618db..2b847d875946 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -116,7 +116,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
 	} else {
 		/* Interrupt mode */
 		result = wait_event_interruptible_timeout(i2c->queue,
-			(i2c->interrupt & CSR_MIF), timeout * HZ);
+			(i2c->interrupt & CSR_MIF), timeout);
 
 		if (unlikely(result < 0)) {
 			pr_debug("I2C: wait interrupted\n");
@@ -311,7 +311,7 @@ static struct i2c_adapter mpc_ops = {
 	.owner = THIS_MODULE,
 	.name = "MPC adapter",
 	.algo = &mpc_algo,
-	.timeout = 1,
+	.timeout = HZ,
 };
 
 static int __devinit fsl_i2c_probe(struct of_device *op, const struct of_device_id *match)
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 7f186bbcb99d..5a4945d1dba4 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -358,7 +358,7 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
 	char		abort = 0;
 
 	time_left = wait_event_interruptible_timeout(drv_data->waitq,
-		!drv_data->block, msecs_to_jiffies(drv_data->adapter.timeout));
+		!drv_data->block, drv_data->adapter.timeout);
 
 	spin_lock_irqsave(&drv_data->lock, flags);
 	if (!time_left) { /* Timed out */
@@ -374,8 +374,7 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
 		spin_unlock_irqrestore(&drv_data->lock, flags);
 
 		time_left = wait_event_timeout(drv_data->waitq,
-			!drv_data->block,
-			msecs_to_jiffies(drv_data->adapter.timeout));
+			!drv_data->block, drv_data->adapter.timeout);
 
 		if ((time_left <= 0) && drv_data->block) {
 			drv_data->state = MV64XXX_I2C_STATE_IDLE;
@@ -530,7 +529,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 	drv_data->adapter.algo = &mv64xxx_i2c_algo;
 	drv_data->adapter.owner = THIS_MODULE;
 	drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-	drv_data->adapter.timeout = pdata->timeout;
+	drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
 	drv_data->adapter.nr = pd->id;
 	platform_set_drvdata(pd, drv_data);
 	i2c_set_adapdata(&drv_data->adapter, drv_data);
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 05af6cd7f270..2ff4683703a8 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -31,10 +31,14 @@
     nForce3 250Gb MCP		00E4
     nForce4 MCP			0052
     nForce4 MCP-04		0034
-    nForce4 MCP51		0264
-    nForce4 MCP55		0368
+    nForce MCP51		0264
+    nForce MCP55		0368
     nForce MCP61		03EB
     nForce MCP65		0446
+    nForce MCP67		0542
+    nForce MCP73		07D8
+    nForce MCP78S		0752
+    nForce MCP79		0AA2
 
     This driver supports the 2 SMBuses that are included in the MCP of the
     nForce2/3/4/5xx chipsets.
@@ -315,6 +319,10 @@ static struct pci_device_id nforce2_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS) },
 	{ 0 }
 };
 
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 4aa8138cb0a9..0ed68e2ccd22 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -23,6 +23,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/delay.h>
+#include <linux/jiffies.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
@@ -41,15 +42,17 @@ static int irq = -1;
 
 /* Data sheet recommends 59kHz for 100kHz operation due to variation
  * in the actual clock rate */
-static int clock  = I2C_PCA_CON_59kHz;
+static int clock  = 59000;
 
+static struct i2c_adapter pca_isa_ops;
 static wait_queue_head_t pca_wait;
 
 static void pca_isa_writebyte(void *pd, int reg, int val)
 {
 #ifdef DEBUG_IO
 	static char *names[] = { "T/O", "DAT", "ADR", "CON" };
-	printk("*** write %s at %#lx <= %#04x\n", names[reg], base+reg, val);
+	printk(KERN_DEBUG "*** write %s at %#lx <= %#04x\n", names[reg],
+	       base+reg, val);
 #endif
 	outb(val, base+reg);
 }
@@ -60,7 +63,7 @@ static int pca_isa_readbyte(void *pd, int reg)
 #ifdef DEBUG_IO
 	{
 		static char *names[] = { "STA", "DAT", "ADR", "CON" };
-		printk("*** read  %s => %#04x\n", names[reg], res);
+		printk(KERN_DEBUG "*** read  %s => %#04x\n", names[reg], res);
 	}
 #endif
 	return res;
@@ -68,16 +71,22 @@ static int pca_isa_readbyte(void *pd, int reg)
 
 static int pca_isa_waitforcompletion(void *pd)
 {
-	int ret = 0;
+	long ret = ~0;
+	unsigned long timeout;
 
 	if (irq > -1) {
-		ret = wait_event_interruptible(pca_wait,
-					       pca_isa_readbyte(pd, I2C_PCA_CON) & I2C_PCA_CON_SI);
+		ret = wait_event_interruptible_timeout(pca_wait,
+				pca_isa_readbyte(pd, I2C_PCA_CON)
+				& I2C_PCA_CON_SI, pca_isa_ops.timeout);
 	} else {
-		while ((pca_isa_readbyte(pd, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
+		/* Do polling */
+		timeout = jiffies + pca_isa_ops.timeout;
+		while (((pca_isa_readbyte(pd, I2C_PCA_CON)
+				& I2C_PCA_CON_SI) == 0)
+				&& (ret = time_before(jiffies, timeout)))
 			udelay(100);
 	}
-	return ret;
+	return ret > 0;
 }
 
 static void pca_isa_resetchip(void *pd)
@@ -102,8 +111,8 @@ static struct i2c_algo_pca_data pca_isa_data = {
 static struct i2c_adapter pca_isa_ops = {
 	.owner          = THIS_MODULE,
 	.algo_data	= &pca_isa_data,
-	.name		= "PCA9564 ISA Adapter",
-	.timeout	= 100,
+	.name		= "PCA9564/PCA9665 ISA Adapter",
+	.timeout	= HZ,
 };
 
 static int __devinit pca_isa_match(struct device *dev, unsigned int id)
@@ -195,7 +204,7 @@ static void __exit pca_isa_exit(void)
 }
 
 MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
-MODULE_DESCRIPTION("ISA base PCA9564 driver");
+MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver");
 MODULE_LICENSE("GPL");
 
 module_param(base, ulong, 0);
@@ -204,7 +213,13 @@ MODULE_PARM_DESC(base, "I/O base address");
 module_param(irq, int, 0);
 MODULE_PARM_DESC(irq, "IRQ");
 module_param(clock, int, 0);
-MODULE_PARM_DESC(clock, "Clock rate as described in table 1 of PCA9564 datasheet");
+MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t"
+		"For PCA9564: 330000,288000,217000,146000,"
+		"88000,59000,44000,36000\n"
+		"\t\tFor PCA9665:\tStandard: 60300 - 100099\n"
+		"\t\t\t\tFast: 100100 - 400099\n"
+		"\t\t\t\tFast+: 400100 - 10000099\n"
+		"\t\t\t\tTurbo: Up to 1265800");
 
 module_init(pca_isa_init);
 module_exit(pca_isa_exit);
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 6bb15ad0a6b6..7b23891b7d59 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/jiffies.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
@@ -81,24 +82,23 @@ static void i2c_pca_pf_writebyte32(void *pd, int reg, int val)
 static int i2c_pca_pf_waitforcompletion(void *pd)
 {
 	struct i2c_pca_pf_data *i2c = pd;
-	int ret = 0;
+	long ret = ~0;
+	unsigned long timeout;
 
 	if (i2c->irq) {
-		ret = wait_event_interruptible(i2c->wait,
+		ret = wait_event_interruptible_timeout(i2c->wait,
 			i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
-			& I2C_PCA_CON_SI);
+			& I2C_PCA_CON_SI, i2c->adap.timeout);
 	} else {
-		/*
-		 * Do polling...
-		 * XXX: Could get stuck in extreme cases!
-		 *      Maybe add timeout, but using irqs is preferred anyhow.
-		 */
-		while ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
+		/* Do polling */
+		timeout = jiffies + i2c->adap.timeout;
+		while (((i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
 				& I2C_PCA_CON_SI) == 0)
+				&& (ret = time_before(jiffies, timeout)))
 			udelay(100);
 	}
 
-	return ret;
+	return ret > 0;
 }
 
 static void i2c_pca_pf_dummyreset(void *pd)
@@ -172,14 +172,25 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev)
 
 	i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0;
 	i2c->adap.owner = THIS_MODULE;
-	snprintf(i2c->adap.name, sizeof(i2c->adap.name), "PCA9564 at 0x%08lx",
-		(unsigned long) res->start);
+	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+		 "PCA9564/PCA9665 at 0x%08lx",
+		 (unsigned long) res->start);
 	i2c->adap.algo_data = &i2c->algo_data;
 	i2c->adap.dev.parent = &pdev->dev;
-	i2c->adap.timeout = platform_data->timeout;
 
-	i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed;
+	if (platform_data) {
+		i2c->adap.timeout = platform_data->timeout;
+		i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed;
+		i2c->gpio = platform_data->gpio;
+	} else {
+		i2c->adap.timeout = HZ;
+		i2c->algo_data.i2c_clock = 59000;
+		i2c->gpio = -1;
+	}
+
 	i2c->algo_data.data = i2c;
+	i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion;
+	i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset;
 
 	switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
 	case IORESOURCE_MEM_32BIT:
@@ -197,11 +208,6 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev)
 		break;
 	}
 
-	i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion;
-
-	i2c->gpio = platform_data->gpio;
-	i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset;
-
 	/* Use gpio_is_valid() when in mainline */
 	if (i2c->gpio > -1) {
 		ret = gpio_request(i2c->gpio, i2c->adap.name);
@@ -246,7 +252,7 @@ e_remap:
 e_alloc:
 	release_mem_region(res->start, res_len(res));
 e_print:
-	printk(KERN_ERR "Registering PCA9564 FAILED! (%d)\n", ret);
+	printk(KERN_ERR "Registering PCA9564/PCA9665 FAILED! (%d)\n", ret);
 	return ret;
 }
 
@@ -290,7 +296,7 @@ static void __exit i2c_pca_pf_exit(void)
 }
 
 MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
-MODULE_DESCRIPTION("I2C-PCA9564 platform driver");
+MODULE_DESCRIPTION("I2C-PCA9564/PCA9665 platform driver");
 MODULE_LICENSE("GPL");
 
 module_init(i2c_pca_pf_init);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 761f9dd53620..0249a7d762b9 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -20,7 +20,7 @@
 /*
    Supports:
 	Intel PIIX4, 440MX
-	Serverworks OSB4, CSB5, CSB6, HT-1000
+	Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
 	ATI IXP200, IXP300, IXP400, SB600, SB700, SB800
 	SMSC Victory66
 
@@ -226,6 +226,70 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 	return 0;
 }
 
+static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev,
+				const struct pci_device_id *id)
+{
+	unsigned short smba_idx = 0xcd6;
+	u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c;
+
+	/* SB800 SMBus does not support forcing address */
+	if (force || force_addr) {
+		dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support "
+			"forcing address!\n");
+		return -EINVAL;
+	}
+
+	/* Determine the address of the SMBus areas */
+	if (!request_region(smba_idx, 2, "smba_idx")) {
+		dev_err(&PIIX4_dev->dev, "SMBus base address index region "
+			"0x%x already in use!\n", smba_idx);
+		return -EBUSY;
+	}
+	outb_p(smb_en, smba_idx);
+	smba_en_lo = inb_p(smba_idx + 1);
+	outb_p(smb_en + 1, smba_idx);
+	smba_en_hi = inb_p(smba_idx + 1);
+	release_region(smba_idx, 2);
+
+	if ((smba_en_lo & 1) == 0) {
+		dev_err(&PIIX4_dev->dev,
+			"Host SMBus controller not enabled!\n");
+		return -ENODEV;
+	}
+
+	piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
+	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
+		return -EBUSY;
+
+	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
+		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
+			piix4_smba);
+		return -EBUSY;
+	}
+
+	/* Request the SMBus I2C bus config region */
+	if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) {
+		dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region "
+			"0x%x already in use!\n", piix4_smba + i2ccfg_offset);
+		release_region(piix4_smba, SMBIOSIZE);
+		piix4_smba = 0;
+		return -EBUSY;
+	}
+	i2ccfg = inb_p(piix4_smba + i2ccfg_offset);
+	release_region(piix4_smba + i2ccfg_offset, 1);
+
+	if (i2ccfg & 1)
+		dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus.\n");
+	else
+		dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus.\n");
+
+	dev_info(&PIIX4_dev->dev,
+		 "SMBus Host Controller at 0x%x, revision %d\n",
+		 piix4_smba, i2ccfg >> 4);
+
+	return 0;
+}
+
 static int piix4_transaction(void)
 {
 	int temp;
@@ -423,6 +487,8 @@ static struct pci_device_id piix4_ids[] = {
 		     PCI_DEVICE_ID_SERVERWORKS_CSB6) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
 		     PCI_DEVICE_ID_SERVERWORKS_HT1000SB) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+		     PCI_DEVICE_ID_SERVERWORKS_HT1100LD) },
 	{ 0, }
 };
 
@@ -433,7 +499,14 @@ static int __devinit piix4_probe(struct pci_dev *dev,
 {
 	int retval;
 
-	retval = piix4_setup(dev, id);
+	if ((dev->vendor == PCI_VENDOR_ID_ATI) &&
+	    (dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) &&
+	    (dev->revision >= 0x40))
+		/* base address location etc changed in SB800 */
+		retval = piix4_setup_sb800(dev, id);
+	else
+		retval = piix4_setup(dev, id);
+
 	if (retval)
 		return retval;
 
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 60ca91745e55..3c9d71f60187 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -191,7 +191,8 @@ static int __devexit i2c_powermac_remove(struct platform_device *dev)
 	i2c_set_adapdata(adapter, NULL);
 	/* We aren't that prepared to deal with this... */
 	if (rc)
-		printk("i2c-powermac.c: Failed to remove bus %s !\n",
+		printk(KERN_WARNING
+		       "i2c-powermac.c: Failed to remove bus %s !\n",
 		       adapter->name);
 	platform_set_drvdata(dev, NULL);
 	kfree(adapter);
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index bdb1f7510e91..c1405c8f6ba5 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -210,11 +210,12 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id);
 static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
 {
 	unsigned int i;
-	printk("i2c: error: %s\n", why);
-	printk("i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n",
+	printk(KERN_ERR "i2c: error: %s\n", why);
+	printk(KERN_ERR "i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n",
 		i2c->msg_num, i2c->msg_idx, i2c->msg_ptr);
-	printk("i2c: ICR: %08x ISR: %08x\n"
-	       "i2c: log: ", readl(_ICR(i2c)), readl(_ISR(i2c)));
+	printk(KERN_ERR "i2c: ICR: %08x ISR: %08x\n",
+	       readl(_ICR(i2c)), readl(_ISR(i2c)));
+	printk(KERN_DEBUG "i2c: log: ");
 	for (i = 0; i < i2c->irqlogidx; i++)
 		printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]);
 	printk("\n");
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index fbb9030b68a5..b6f3a0de6ca2 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -152,7 +152,7 @@ static void i2c_device_shutdown(struct device *dev)
 		driver->shutdown(to_i2c_client(dev));
 }
 
-static int i2c_device_suspend(struct device * dev, pm_message_t mesg)
+static int i2c_device_suspend(struct device *dev, pm_message_t mesg)
 {
 	struct i2c_driver *driver;
 
@@ -164,7 +164,7 @@ static int i2c_device_suspend(struct device * dev, pm_message_t mesg)
 	return driver->suspend(to_i2c_client(dev), mesg);
 }
 
-static int i2c_device_resume(struct device * dev)
+static int i2c_device_resume(struct device *dev)
 {
 	struct i2c_driver *driver;
 
@@ -187,13 +187,15 @@ static void i2c_client_dev_release(struct device *dev)
 	kfree(to_i2c_client(dev));
 }
 
-static ssize_t show_client_name(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t
+show_client_name(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	return sprintf(buf, "%s\n", client->name);
 }
 
-static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t
+show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
@@ -365,8 +367,7 @@ static struct i2c_driver dummy_driver = {
  * This returns the new i2c client, which should be saved for later use with
  * i2c_unregister_device(); or NULL to indicate an error.
  */
-struct i2c_client *
-i2c_new_dummy(struct i2c_adapter *adapter, u16 address)
+struct i2c_client *i2c_new_dummy(struct i2c_adapter *adapter, u16 address)
 {
 	struct i2c_board_info info = {
 		I2C_BOARD_INFO("dummy", address),
@@ -413,8 +414,8 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
 		if (devinfo->busnum == adapter->nr
 				&& !i2c_new_device(adapter,
 						&devinfo->board_info))
-			printk(KERN_ERR "i2c-core: can't create i2c%d-%04x\n",
-				i2c_adapter_id(adapter),
+			dev_err(&adapter->dev,
+				"Can't create device at 0x%02x\n",
 				devinfo->board_info.addr);
 	}
 	mutex_unlock(&__i2c_board_lock);
@@ -459,6 +460,11 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 		pr_debug("I2C adapter driver [%s] forgot to specify "
 			 "physical device\n", adap->name);
 	}
+
+	/* Set default timeout to 1 second if not already set */
+	if (adap->timeout == 0)
+		adap->timeout = HZ;
+
 	dev_set_name(&adap->dev, "i2c-%d", adap->nr);
 	adap->dev.release = &i2c_adapter_dev_release;
 	adap->dev.class = &i2c_adapter_class;
@@ -581,7 +587,8 @@ static int i2c_do_del_adapter(struct device_driver *d, void *data)
 	struct i2c_client *client, *_n;
 	int res;
 
-	/* Remove the devices we created ourselves */
+	/* Remove the devices we created ourselves as the result of hardware
+	 * probing (using a driver's detect method) */
 	list_for_each_entry_safe(client, _n, &driver->clients, detected) {
 		if (client->adapter == adapter) {
 			dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
@@ -749,6 +756,8 @@ static int __detach_adapter(struct device *dev, void *data)
 	struct i2c_driver *driver = data;
 	struct i2c_client *client, *_n;
 
+	/* Remove the devices we created ourselves as the result of hardware
+	 * probing (using a driver's detect method) */
 	list_for_each_entry_safe(client, _n, &driver->clients, detected) {
 		dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
 			client->name, client->addr);
@@ -1012,7 +1021,7 @@ module_exit(i2c_exit);
  * Note that there is no requirement that each message be sent to
  * the same slave address, although that is the most common model.
  */
-int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num)
+int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 {
 	int ret;
 
@@ -1519,8 +1528,7 @@ EXPORT_SYMBOL(i2c_put_adapter);
 /* The SMBus parts */
 
 #define POLY    (0x1070U << 3)
-static u8
-crc8(u16 data)
+static u8 crc8(u16 data)
 {
 	int i;
 
@@ -1984,9 +1992,9 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
  * This executes an SMBus protocol operation, and returns a negative
  * errno code else zero on success.
  */
-s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
+s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
 		   char read_write, u8 command, int protocol,
-                   union i2c_smbus_data * data)
+		   union i2c_smbus_data *data)
 {
 	s32 res;
 
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index c76df8cda5ef..89fec052f3b4 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -2,7 +2,7 @@ menu "EEPROM support"
 
 config EEPROM_AT24
 	tristate "I2C EEPROMs from most vendors"
-	depends on I2C && SYSFS && EXPERIMENTAL
+	depends on I2C && SYSFS
 	help
 	  Enable this driver to get read/write support to most I2C EEPROMs,
 	  after you configure the driver to know about each EEPROM on