Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (dme1737) Minor cleanups
  hwmon: (dme1737) Add support for in7 for SCH5127
  hwmon: (emc1403) Add EMC1423 support
  hwmon: (w83627hf) Document W83627THF voltage pin mapping
  hwmon: (w83793) Drop useless mutex
  hwmon: (fschmd) Drop useless mutex
  hwmon: (w83781d) Use pr_fmt and pr_<level>
  hwmon: (pc87427) Use pr_fmt and pr_<level>
  hwmon: (pc87360) Use pr_fmt and pr_<level>
  hwmon: (lm78) Use pr_fmt and pr_<level>
  hwmon: (it87) Use pr_fmt and pr_<level>
  hwmon: Schedule the removal of the old intrusion detection interfaces
  hwmon: (w83793) Implement the standard intrusion detection interface
  hwmon: (w83792d) Implement the standard intrusion detection interface
  hwmon: (adm9240) Implement the standard intrusion detection interface
  hwmon: (via686a) Initialize fan_div values
  hwmon: (w83795) Silent false warning from gcc
  hwmon: (ads7828) Update email contact details

15 files changed, 328 insertions, 174 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index bdc13d28b1ea..35f00dae3676 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -809,10 +809,10 @@ config SENSORS_DME1737
 	  will be called dme1737.
 
 config SENSORS_EMC1403
-	tristate "SMSC EMC1403 thermal sensor"
+	tristate "SMSC EMC1403/23 thermal sensor"
 	depends on I2C
 	help
-	  If you say yes here you get support for the SMSC EMC1403
+	  If you say yes here you get support for the SMSC EMC1403/23
 	  temperature monitoring chip.
 
 	  Threshold values can be configured using sysfs.
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 0727ad250793..9e234b981b83 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -20,7 +20,7 @@
  * Alarms	16-bit map of active alarms
  * Analog Out	0..1250 mV output
  *
- * Chassis Intrusion: clear CI latch with 'echo 1 > chassis_clear'
+ * Chassis Intrusion: clear CI latch with 'echo 0 > intrusion0_alarm'
  *
  * Test hardware: Intel SE440BX-2 desktop motherboard --Grant
  *
@@ -476,13 +476,16 @@ static ssize_t set_aout(struct device *dev,
 static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
 
 /* chassis_clear */
-static ssize_t chassis_clear(struct device *dev,
+static ssize_t chassis_clear_legacy(struct device *dev,
 		struct device_attribute *attr,
 		const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	unsigned long val = simple_strtol(buf, NULL, 10);
 
+	dev_warn(dev, "Attribute chassis_clear is deprecated, "
+		 "use intrusion0_alarm instead\n");
+
 	if (val == 1) {
 		i2c_smbus_write_byte_data(client,
 				ADM9240_REG_CHASSIS_CLEAR, 0x80);
@@ -490,7 +493,29 @@ static ssize_t chassis_clear(struct device *dev,
 	}
 	return count;
 }
-static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear);
+static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear_legacy);
+
+static ssize_t chassis_clear(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm9240_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) || val != 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	i2c_smbus_write_byte_data(client, ADM9240_REG_CHASSIS_CLEAR, 0x80);
+	data->valid = 0;		/* Force cache refresh */
+	mutex_unlock(&data->update_lock);
+	dev_dbg(&client->dev, "chassis intrusion latch cleared\n");
+
+	return count;
+}
+static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR, show_alarm,
+		chassis_clear, 12);
 
 static struct attribute *adm9240_attributes[] = {
 	&sensor_dev_attr_in0_input.dev_attr.attr,
@@ -532,6 +557,7 @@ static struct attribute *adm9240_attributes[] = {
 	&dev_attr_alarms.attr,
 	&dev_attr_aout_output.attr,
 	&dev_attr_chassis_clear.attr,
+	&sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
 	&dev_attr_cpu0_vid.attr,
 	NULL
 };
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index aac85f3aed50..c42c5a69a664 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -4,7 +4,7 @@
 
 	This driver is based on the lm75 and other lm_sensors/hwmon drivers
 
-	Written by Steve Hardy <steve@linuxrealtime.co.uk>
+	Written by Steve Hardy <shardy@redhat.com>
 
 	Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads7828.pdf
 
@@ -271,7 +271,7 @@ static void __exit sensors_ads7828_exit(void)
 	i2c_del_driver(&ads7828_driver);
 }
 
-MODULE_AUTHOR("Steve Hardy <steve@linuxrealtime.co.uk>");
+MODULE_AUTHOR("Steve Hardy <shardy@redhat.com>");
 MODULE_DESCRIPTION("ADS7828 driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index e9a610bfd0cc..d9c592713919 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -77,12 +77,14 @@ enum chips { dme1737, sch5027, sch311x, sch5127 };
  * in4   +12V
  * in5   VTR   (+3.3V stby)
  * in6   Vbat
+ * in7   Vtrip (sch5127 only)
  *
  * --------------------------------------------------------------------- */
 
-/* Voltages (in) numbered 0-6 (ix) */
-#define	DME1737_REG_IN(ix)		((ix) < 5 ? 0x20 + (ix) \
-						  : 0x94 + (ix))
+/* Voltages (in) numbered 0-7 (ix) */
+#define	DME1737_REG_IN(ix)		((ix) < 5 ? 0x20 + (ix) : \
+					 (ix) < 7 ? 0x94 + (ix) : \
+						    0x1f)
 #define	DME1737_REG_IN_MIN(ix)		((ix) < 5 ? 0x44 + (ix) * 2 \
 						  : 0x91 + (ix) * 2)
 #define	DME1737_REG_IN_MAX(ix)		((ix) < 5 ? 0x45 + (ix) * 2 \
@@ -101,10 +103,11 @@ enum chips { dme1737, sch5027, sch311x, sch5127 };
  *    IN_TEMP_LSB(1) = [temp3, temp1]
  *    IN_TEMP_LSB(2) = [in4, temp2]
  *    IN_TEMP_LSB(3) = [in3, in0]
- *    IN_TEMP_LSB(4) = [in2, in1] */
+ *    IN_TEMP_LSB(4) = [in2, in1]
+ *    IN_TEMP_LSB(5) = [res, in7] */
 #define DME1737_REG_IN_TEMP_LSB(ix)	(0x84 + (ix))
-static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0};
-static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4};
+static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0, 5};
+static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4, 4};
 static const u8 DME1737_REG_TEMP_LSB[] = {1, 2, 1};
 static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0};
 
@@ -145,7 +148,7 @@ static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0};
 #define DME1737_REG_ALARM1		0x41
 #define DME1737_REG_ALARM2		0x42
 #define DME1737_REG_ALARM3		0x83
-static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17};
+static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17, 18};
 static const u8 DME1737_BIT_ALARM_TEMP[] = {4, 5, 6};
 static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
 
@@ -190,6 +193,7 @@ static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
 #define HAS_PWM_MIN		(1 << 4)		/* bit 4 */
 #define HAS_FAN(ix)		(1 << ((ix) + 5))	/* bits 5-10 */
 #define HAS_PWM(ix)		(1 << ((ix) + 11))	/* bits 11-16 */
+#define HAS_IN7			(1 << 17)		/* bit 17 */
 
 /* ---------------------------------------------------------------------
  * Data structures and manipulation thereof
@@ -213,9 +217,9 @@ struct dme1737_data {
 	u32 has_features;
 
 	/* Register values */
-	u16 in[7];
-	u8  in_min[7];
-	u8  in_max[7];
+	u16 in[8];
+	u8  in_min[8];
+	u8  in_max[8];
 	s16 temp[3];
 	s8  temp_min[3];
 	s8  temp_max[3];
@@ -247,7 +251,7 @@ static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300,
 static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300,
 					 3300};
 static const int IN_NOMINAL_SCH5127[] = {2500, 2250, 3300, 1125, 1125, 3300,
-					 3300};
+					 3300, 1500};
 #define IN_NOMINAL(type)	((type) == sch311x ? IN_NOMINAL_SCH311x : \
 				 (type) == sch5027 ? IN_NOMINAL_SCH5027 : \
 				 (type) == sch5127 ? IN_NOMINAL_SCH5127 : \
@@ -580,7 +584,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 {
 	struct dme1737_data *data = dev_get_drvdata(dev);
 	int ix;
-	u8 lsb[5];
+	u8 lsb[6];
 
 	mutex_lock(&data->update_lock);
 
@@ -603,6 +607,9 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 			/* Voltage inputs are stored as 16 bit values even
 			 * though they have only 12 bits resolution. This is
 			 * to make it consistent with the temp inputs. */
+			if (ix == 7 && !(data->has_features & HAS_IN7)) {
+				continue;
+			}
 			data->in[ix] = dme1737_read(data,
 					DME1737_REG_IN(ix)) << 8;
 			data->in_min[ix] = dme1737_read(data,
@@ -635,10 +642,16 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 		 * which the registers are read (MSB first, then LSB) is
 		 * important! */
 		for (ix = 0; ix < ARRAY_SIZE(lsb); ix++) {
+			if (ix == 5 && !(data->has_features & HAS_IN7)) {
+				continue;
+			}
 			lsb[ix] = dme1737_read(data,
 					DME1737_REG_IN_TEMP_LSB(ix));
 		}
 		for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
+			if (ix == 7 && !(data->has_features & HAS_IN7)) {
+				continue;
+			}
 			data->in[ix] |= (lsb[DME1737_REG_IN_LSB[ix]] <<
 					DME1737_REG_IN_LSB_SHL[ix]) & 0xf0;
 		}
@@ -762,7 +775,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 
 /* ---------------------------------------------------------------------
  * Voltage sysfs attributes
- * ix = [0-5]
+ * ix = [0-7]
  * --------------------------------------------------------------------- */
 
 #define SYS_IN_INPUT	0
@@ -1439,7 +1452,7 @@ static ssize_t show_name(struct device *dev, struct device_attribute *attr,
  * Sysfs device attribute defines and structs
  * --------------------------------------------------------------------- */
 
-/* Voltages 0-6 */
+/* Voltages 0-7 */
 
 #define SENSOR_DEVICE_ATTR_IN(ix) \
 static SENSOR_DEVICE_ATTR_2(in##ix##_input, S_IRUGO, \
@@ -1458,6 +1471,7 @@ SENSOR_DEVICE_ATTR_IN(3);
 SENSOR_DEVICE_ATTR_IN(4);
 SENSOR_DEVICE_ATTR_IN(5);
 SENSOR_DEVICE_ATTR_IN(6);
+SENSOR_DEVICE_ATTR_IN(7);
 
 /* Temperatures 1-3 */
 
@@ -1576,7 +1590,7 @@ static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);   /* for ISA devices */
  * created unconditionally. The attributes that need modification of their
  * permissions are created read-only and write permissions are added or removed
  * on the fly when required */
-static struct attribute *dme1737_attr[] ={
+static struct attribute *dme1737_attr[] = {
 	/* Voltages */
 	&sensor_dev_attr_in0_input.dev_attr.attr,
 	&sensor_dev_attr_in0_min.dev_attr.attr,
@@ -1681,7 +1695,7 @@ static const struct attribute_group dme1737_zone3_group = {
 };
 
 
-/* The following struct holds temp zone hysteresis  related attributes, which
+/* The following struct holds temp zone hysteresis related attributes, which
  * are not available in all chips. The following chips support them:
  * DME1737, SCH311x */
 static struct attribute *dme1737_zone_hyst_attr[] = {
@@ -1695,6 +1709,21 @@ static const struct attribute_group dme1737_zone_hyst_group = {
 	.attrs = dme1737_zone_hyst_attr,
 };
 
+/* The following struct holds voltage in7 related attributes, which
+ * are not available in all chips. The following chips support them:
+ * SCH5127 */
+static struct attribute *dme1737_in7_attr[] = {
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in7_min.dev_attr.attr,
+	&sensor_dev_attr_in7_max.dev_attr.attr,
+	&sensor_dev_attr_in7_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_in7_group = {
+	.attrs = dme1737_in7_attr,
+};
+
 /* The following structs hold the PWM attributes, some of which are optional.
  * Their creation depends on the chip configuration which is determined during
  * module load. */
@@ -1986,6 +2015,9 @@ static void dme1737_remove_files(struct device *dev)
 	if (data->has_features & HAS_ZONE_HYST) {
 		sysfs_remove_group(&dev->kobj, &dme1737_zone_hyst_group);
 	}
+	if (data->has_features & HAS_IN7) {
+		sysfs_remove_group(&dev->kobj, &dme1737_in7_group);
+	}
 	sysfs_remove_group(&dev->kobj, &dme1737_group);
 
 	if (!data->client) {
@@ -1999,43 +2031,58 @@ static int dme1737_create_files(struct device *dev)
 	int err, ix;
 
 	/* Create a name attribute for ISA devices */
-	if (!data->client &&
-	    (err = sysfs_create_file(&dev->kobj, &dev_attr_name.attr))) {
-		goto exit;
+	if (!data->client) {
+		err = sysfs_create_file(&dev->kobj, &dev_attr_name.attr);
+		if (err) {
+			goto exit;
+		}
 	}
 
 	/* Create standard sysfs attributes */
-	if ((err = sysfs_create_group(&dev->kobj, &dme1737_group))) {
+	err = sysfs_create_group(&dev->kobj, &dme1737_group);
+	if (err) {
 		goto exit_remove;
 	}
 
 	/* Create chip-dependent sysfs attributes */
-	if ((data->has_features & HAS_TEMP_OFFSET) &&
-	    (err = sysfs_create_group(&dev->kobj,
-				      &dme1737_temp_offset_group))) {
-		goto exit_remove;
+	if (data->has_features & HAS_TEMP_OFFSET) {
+		err = sysfs_create_group(&dev->kobj,
+					 &dme1737_temp_offset_group);
+		if (err) {
+			goto exit_remove;
+		}
 	}
-	if ((data->has_features & HAS_VID) &&
-	    (err = sysfs_create_group(&dev->kobj,
-				      &dme1737_vid_group))) {
-		goto exit_remove;
+	if (data->has_features & HAS_VID) {
+		err = sysfs_create_group(&dev->kobj, &dme1737_vid_group);
+		if (err) {
+			goto exit_remove;
+		}
 	}
-	if ((data->has_features & HAS_ZONE3) &&
-	    (err = sysfs_create_group(&dev->kobj,
-				      &dme1737_zone3_group))) {
-		goto exit_remove;
+	if (data->has_features & HAS_ZONE3) {
+		err = sysfs_create_group(&dev->kobj, &dme1737_zone3_group);
+		if (err) {
+			goto exit_remove;
+		}
 	}
-	if ((data->has_features & HAS_ZONE_HYST) &&
-	    (err = sysfs_create_group(&dev->kobj,
-				      &dme1737_zone_hyst_group))) {
-		goto exit_remove;
+	if (data->has_features & HAS_ZONE_HYST) {
+		err = sysfs_create_group(&dev->kobj, &dme1737_zone_hyst_group);
+		if (err) {
+			goto exit_remove;
+		}
+	}
+	if (data->has_features & HAS_IN7) {
+		err = sysfs_create_group(&dev->kobj, &dme1737_in7_group);
+		if (err) {
+			goto exit_remove;
+		}
 	}
 
 	/* Create fan sysfs attributes */
 	for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
 		if (data->has_features & HAS_FAN(ix)) {
-			if ((err = sysfs_create_group(&dev->kobj,
-						&dme1737_fan_group[ix]))) {
+			err = sysfs_create_group(&dev->kobj,
+						 &dme1737_fan_group[ix]);
+			if (err) {
 				goto exit_remove;
 			}
 		}
@@ -2044,14 +2091,17 @@ static int dme1737_create_files(struct device *dev)
 	/* Create PWM sysfs attributes */
 	for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
 		if (data->has_features & HAS_PWM(ix)) {
-			if ((err = sysfs_create_group(&dev->kobj,
-						&dme1737_pwm_group[ix]))) {
+			err = sysfs_create_group(&dev->kobj,
+						 &dme1737_pwm_group[ix]);
+			if (err) {
 				goto exit_remove;
 			}
-			if ((data->has_features & HAS_PWM_MIN) && ix < 3 &&
-			    (err = sysfs_create_file(&dev->kobj,
-					dme1737_auto_pwm_min_attr[ix]))) {
-				goto exit_remove;
+			if ((data->has_features & HAS_PWM_MIN) && (ix < 3)) {
+				err = sysfs_create_file(&dev->kobj,
+						dme1737_auto_pwm_min_attr[ix]);
+				if (err) {
+					goto exit_remove;
+				}
 			}
 		}
 	}
@@ -2188,7 +2238,7 @@ static int dme1737_init_device(struct device *dev)
 		data->has_features |= HAS_ZONE3;
 		break;
 	case sch5127:
-		data->has_features |= HAS_FAN(2) | HAS_PWM(2);
+		data->has_features |= HAS_FAN(2) | HAS_PWM(2) | HAS_IN7;
 		break;
 	default:
 		break;
@@ -2281,8 +2331,9 @@ static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data)
 	dme1737_sio_outb(sio_cip, 0x07, 0x0a);
 
 	/* Get the base address of the runtime registers */
-	if (!(addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
-		      dme1737_sio_inb(sio_cip, 0x61))) {
+	addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
+		dme1737_sio_inb(sio_cip, 0x61);
+	if (!addr) {
 		err = -ENODEV;
 		goto exit;
 	}
@@ -2363,13 +2414,15 @@ static int dme1737_i2c_probe(struct i2c_client *client,
 	mutex_init(&data->update_lock);
 
 	/* Initialize the DME1737 chip */
-	if ((err = dme1737_init_device(dev))) {
+	err = dme1737_init_device(dev);
+	if (err) {
 		dev_err(dev, "Failed to initialize device.\n");
 		goto exit_kfree;
 	}
 
 	/* Create sysfs files */
-	if ((err = dme1737_create_files(dev))) {
+	err = dme1737_create_files(dev);
+	if (err) {
 		dev_err(dev, "Failed to create sysfs files.\n");
 		goto exit_kfree;
 	}
@@ -2446,8 +2499,9 @@ static int __init dme1737_isa_detect(int sio_cip, unsigned short *addr)
 	dme1737_sio_outb(sio_cip, 0x07, 0x0a);
 
 	/* Get the base address of the runtime registers */
-	if (!(base_addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
-			   dme1737_sio_inb(sio_cip, 0x61))) {
+	base_addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
+		     dme1737_sio_inb(sio_cip, 0x61);
+	if (!base_addr) {
 		pr_err("Base address not set\n");
 		err = -ENODEV;
 		goto exit;
@@ -2476,18 +2530,21 @@ static int __init dme1737_isa_device_add(unsigned short addr)
 	if (err)
 		goto exit;
 
-	if (!(pdev = platform_device_alloc("dme1737", addr))) {
+	pdev = platform_device_alloc("dme1737", addr);
+	if (!pdev) {
 		pr_err("Failed to allocate device\n");
 		err = -ENOMEM;
 		goto exit;
 	}
 
-	if ((err = platform_device_add_resources(pdev, &res, 1))) {
+	err = platform_device_add_resources(pdev, &res, 1);
+	if (err) {
 		pr_err("Failed to add device resource (err = %d)\n", err);
 		goto exit_device_put;
 	}
 
-	if ((err = platform_device_add(pdev))) {
+	err = platform_device_add(pdev);
+	if (err) {
 		pr_err("Failed to add device (err = %d)\n", err);
 		goto exit_device_put;
 	}
@@ -2514,11 +2571,12 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev)
 		dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
 			(unsigned short)res->start,
 			(unsigned short)res->start + DME1737_EXTENT - 1);
-                err = -EBUSY;
-                goto exit;
-        }
+		err = -EBUSY;
+		goto exit;
+	}
 
-	if (!(data = kzalloc(sizeof(struct dme1737_data), GFP_KERNEL))) {
+	data = kzalloc(sizeof(struct dme1737_data), GFP_KERNEL);
+	if (!data) {
 		err = -ENOMEM;
 		goto exit_release_region;
 	}
@@ -2565,13 +2623,15 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev)
 		 data->type == sch5127 ? "SCH5127" : "SCH311x", data->addr);
 
 	/* Initialize the chip */
-	if ((err = dme1737_init_device(dev))) {
+	err = dme1737_init_device(dev);
+	if (err) {
 		dev_err(dev, "Failed to initialize device.\n");
 		goto exit_kfree;
 	}
 
 	/* Create sysfs files */
-	if ((err = dme1737_create_files(dev))) {
+	err = dme1737_create_files(dev);
+	if (err) {
 		dev_err(dev, "Failed to create sysfs files.\n");
 		goto exit_kfree;
 	}
@@ -2628,7 +2688,8 @@ static int __init dme1737_init(void)
 	int err;
 	unsigned short addr;
 
-	if ((err = i2c_add_driver(&dme1737_i2c_driver))) {
+	err = i2c_add_driver(&dme1737_i2c_driver);
+	if (err) {
 		goto exit;
 	}
 
@@ -2641,12 +2702,14 @@ static int __init dme1737_init(void)
 		return 0;
 	}
 
-	if ((err = platform_driver_register(&dme1737_isa_driver))) {
+	err = platform_driver_register(&dme1737_isa_driver);
+	if (err) {
 		goto exit_del_i2c_driver;
 	}
 
 	/* Sets global pdev as a side effect */
-	if ((err = dme1737_isa_device_add(addr))) {
+	err = dme1737_isa_device_add(addr);
+	if (err) {
 		goto exit_del_isa_driver;
 	}
 
diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
index 8dee3f38fdfb..5dea9faa1656 100644
--- a/drivers/hwmon/emc1403.c
+++ b/drivers/hwmon/emc1403.c
@@ -269,23 +269,30 @@ static int emc1403_detect(struct i2c_client *client,
 			struct i2c_board_info *info)
 {
 	int id;
-	/* Check if thermal chip is SMSC and EMC1403 */
+	/* Check if thermal chip is SMSC and EMC1403 or EMC1423 */
 
 	id = i2c_smbus_read_byte_data(client, THERMAL_SMSC_ID_REG);
 	if (id != 0x5d)
 		return -ENODEV;
 
+	id = i2c_smbus_read_byte_data(client, THERMAL_PID_REG);
+	switch (id) {
+	case 0x21:
+		strlcpy(info->type, "emc1403", I2C_NAME_SIZE);
+		break;
+	case 0x23:
+		strlcpy(info->type, "emc1423", I2C_NAME_SIZE);
+		break;
 	/* Note: 0x25 is the 1404 which is very similar and this
 	   driver could be extended */
-	id = i2c_smbus_read_byte_data(client, THERMAL_PID_REG);
-	if (id != 0x21)
+	default:
 		return -ENODEV;
+	}
 
 	id = i2c_smbus_read_byte_data(client, THERMAL_REVISION_REG);
 	if (id != 0x01)
 		return -ENODEV;
 
-	strlcpy(info->type, "emc1403", I2C_NAME_SIZE);
 	return 0;
 }
 
@@ -342,6 +349,7 @@ static const unsigned short emc1403_address_list[] = {
 
 static const struct i2c_device_id emc1403_idtable[] = {
 	{ "emc1403", 0 },
+	{ "emc1423", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, emc1403_idtable);
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index d4d4ca65d371..aa6d8b686f82 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -49,7 +49,6 @@
 #include <linux/kref.h>
 
 /* Addresses to scan */
-static DEFINE_MUTEX(watchdog_mutex);
 static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
 
 /* Insmod parameters */
@@ -850,7 +849,7 @@ static ssize_t watchdog_write(struct file *filp, const char __user *buf,
 
 static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
-	static struct watchdog_info ident = {
+	struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
 				WDIOF_CARDRESET,
 		.identity = "FSC watchdog"
@@ -858,7 +857,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long ar
 	int i, ret = 0;
 	struct fschmd_data *data = filp->private_data;
 
-	mutex_lock(&watchdog_mutex);
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		ident.firmware_version = data->revision;
@@ -915,7 +913,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long ar
 	default:
 		ret = -ENOTTY;
 	}
-	mutex_unlock(&watchdog_mutex);
 	return ret;
 }
 
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index a428a9264195..316b64823f7b 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -38,6 +38,8 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -1570,26 +1572,25 @@ static int __init it87_find(unsigned short *address,
 	case 0xffff:	/* No device at all */
 		goto exit;
 	default:
-		pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n",
-			 chip_type);
+		pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type);
 		goto exit;
 	}
 
 	superio_select(PME);
 	if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
-		pr_info("it87: Device not activated, skipping\n");
+		pr_info("Device not activated, skipping\n");
 		goto exit;
 	}
 
 	*address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
 	if (*address == 0) {
-		pr_info("it87: Base address not set, skipping\n");
+		pr_info("Base address not set, skipping\n");
 		goto exit;
 	}
 
 	err = 0;
 	sio_data->revision = superio_inb(DEVREV) & 0x0f;
-	pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
+	pr_info("Found IT%04xF chip at 0x%x, revision %d\n",
 		chip_type, *address, sio_data->revision);
 
 	/* in8 (Vbat) is always internal */
@@ -1615,7 +1616,7 @@ static int __init it87_find(unsigned short *address,
 		} else {
 			/* We need at least 4 VID pins */
 			if (reg & 0x0f) {
-				pr_info("it87: VID is disabled (pins used for GPIO)\n");
+				pr_info("VID is disabled (pins used for GPIO)\n");
 				sio_data->skip_vid = 1;
 			}
 		}
@@ -1651,7 +1652,7 @@ static int __init it87_find(unsigned short *address,
 		if (sio_data->type == it8720 && !(reg & (1 << 1))) {
 			reg |= (1 << 1);
 			superio_outb(IT87_SIO_PINX2_REG, reg);
-			pr_notice("it87: Routing internal VCCH to in7\n");
+			pr_notice("Routing internal VCCH to in7\n");
 		}
 		if (reg & (1 << 0))
 			sio_data->internal |= (1 << 0);
@@ -1661,7 +1662,7 @@ static int __init it87_find(unsigned short *address,
 		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	}
 	if (sio_data->beep_pin)
-		pr_info("it87: Beeping is supported\n");
+		pr_info("Beeping is supported\n");
 
 	/* Disable specific features based on DMI strings */
 	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
@@ -1675,8 +1676,7 @@ static int __init it87_find(unsigned short *address,
 			   the PWM2 duty cycle, so we disable it.
 			   I use the board name string as the trigger in case
 			   the same board is ever used in other systems. */
-			pr_info("it87: Disabling pwm2 due to "
-				"hardware constraints\n");
+			pr_info("Disabling pwm2 due to hardware constraints\n");
 			sio_data->skip_pwm = (1 << 1);
 		}
 	}
@@ -2189,28 +2189,26 @@ static int __init it87_device_add(unsigned short address,
 	pdev = platform_device_alloc(DRVNAME, address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add_data(pdev, sio_data,
 				       sizeof(struct it87_sio_data));
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+		pr_err("Platform data allocation failed\n");
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index 72ff2c4e757d..4cb24eafe318 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -19,6 +19,8 @@
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -858,7 +860,7 @@ static int __init lm78_isa_found(unsigned short address)
 	 * individually for the probing phase. */
 	for (port = address; port < address + LM78_EXTENT; port++) {
 		if (!request_region(port, 1, "lm78")) {
-			pr_debug("lm78: Failed to request port 0x%x\n", port);
+			pr_debug("Failed to request port 0x%x\n", port);
 			goto release;
 		}
 	}
@@ -920,7 +922,7 @@ static int __init lm78_isa_found(unsigned short address)
 		found = 1;
 
 	if (found)
-		pr_info("lm78: Found an %s chip at %#x\n",
+		pr_info("Found an %s chip at %#x\n",
 			val & 0x80 ? "LM79" : "LM78", (int)address);
 
  release:
@@ -942,21 +944,19 @@ static int __init lm78_isa_device_add(unsigned short address)
 	pdev = platform_device_alloc("lm78", address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR "lm78: Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR "lm78: Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR "lm78: Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 68e69a49633c..3d99b8854d7c 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -33,6 +33,8 @@
  *  the standard Super-I/O addresses is used (0x2E/0x2F or 0x4E/0x4F).
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -1031,16 +1033,15 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
 
 		val = superio_inb(sioaddr, ACT);
 		if (!(val & 0x01)) {
-			printk(KERN_INFO "pc87360: Device 0x%02x not "
-			       "activated\n", logdev[i]);
+			pr_info("Device 0x%02x not activated\n", logdev[i]);
 			continue;
 		}
 
 		val = (superio_inb(sioaddr, BASE) << 8)
 		    | superio_inb(sioaddr, BASE + 1);
 		if (!val) {
-			printk(KERN_INFO "pc87360: Base address not set for "
-			       "device 0x%02x\n", logdev[i]);
+			pr_info("Base address not set for device 0x%02x\n",
+				logdev[i]);
 			continue;
 		}
 
@@ -1050,17 +1051,15 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
 			confreg[0] = superio_inb(sioaddr, 0xF0);
 			confreg[1] = superio_inb(sioaddr, 0xF1);
 
-#ifdef DEBUG
-			printk(KERN_DEBUG "pc87360: Fan 1: mon=%d "
-			       "ctrl=%d inv=%d\n", (confreg[0]>>2)&1,
-			       (confreg[0]>>3)&1, (confreg[0]>>4)&1);
-			printk(KERN_DEBUG "pc87360: Fan 2: mon=%d "
-			       "ctrl=%d inv=%d\n", (confreg[0]>>5)&1,
-			       (confreg[0]>>6)&1, (confreg[0]>>7)&1);
-			printk(KERN_DEBUG "pc87360: Fan 3: mon=%d "
-			       "ctrl=%d inv=%d\n", confreg[1]&1,
-			       (confreg[1]>>1)&1, (confreg[1]>>2)&1);
-#endif
+			pr_debug("Fan %d: mon=%d ctrl=%d inv=%d\n", 1,
+				 (confreg[0] >> 2) & 1, (confreg[0] >> 3) & 1,
+				 (confreg[0] >> 4) & 1);
+			pr_debug("Fan %d: mon=%d ctrl=%d inv=%d\n", 2,
+				 (confreg[0] >> 5) & 1, (confreg[0] >> 6) & 1,
+				 (confreg[0] >> 7) & 1);
+			pr_debug("Fan %d: mon=%d ctrl=%d inv=%d\n", 3,
+				 confreg[1] & 1, (confreg[1] >> 1) & 1,
+				 (confreg[1] >> 2) & 1);
 		} else if (i==1) { /* Voltages */
 			/* Are we using thermistors? */
 			if (*devid == 0xE9) { /* PC87366 */
@@ -1071,14 +1070,12 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
 				confreg[3] = superio_inb(sioaddr, 0x25);
 
 				if (confreg[2] & 0x40) {
-					printk(KERN_INFO "pc87360: Using "
-					       "thermistors for temperature "
-					       "monitoring\n");
+					pr_info("Using thermistors for "
+						"temperature monitoring\n");
 				}
 				if (confreg[3] & 0xE0) {
-					printk(KERN_INFO "pc87360: VID "
-					       "inputs routed (mode %u)\n",
-					       confreg[3] >> 5);
+					pr_info("VID inputs routed (mode %u)\n",
+						confreg[3] >> 5);
 				}
 			}
 		}
@@ -1616,7 +1613,7 @@ static int __init pc87360_device_add(unsigned short address)
 	pdev = platform_device_alloc("pc87360", address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR "pc87360: Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
@@ -1639,15 +1636,13 @@ static int __init pc87360_device_add(unsigned short address)
 
 	err = platform_device_add_resources(pdev, res, res_count);
 	if (err) {
-		printk(KERN_ERR "pc87360: Device resources addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resources addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR "pc87360: Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
@@ -1666,8 +1661,7 @@ static int __init pc87360_init(void)
 
 	if (pc87360_find(0x2e, &devid, extra_isa)
 	 && pc87360_find(0x4e, &devid, extra_isa)) {
-		printk(KERN_WARNING "pc87360: PC8736x not detected, "
-		       "module not inserted.\n");
+		pr_warn("PC8736x not detected, module not inserted\n");
 		return -ENODEV;
 	}
 
@@ -1680,8 +1674,7 @@ static int __init pc87360_init(void)
 	}
 
 	if (address == 0x0000) {
-		printk(KERN_WARNING "pc87360: No active logical device, "
-		       "module not inserted.\n");
+		pr_warn("No active logical device, module not inserted\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c
index 9ec4daaf6ca6..8da2181630b1 100644
--- a/drivers/hwmon/pc87427.c
+++ b/drivers/hwmon/pc87427.c
@@ -22,6 +22,8 @@
  *  mode, and voltages aren't supported at all.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -1077,7 +1079,7 @@ static int __devinit pc87427_probe(struct platform_device *pdev)
 	data = kzalloc(sizeof(struct pc87427_data), GFP_KERNEL);
 	if (!data) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Out of memory\n");
+		pr_err("Out of memory\n");
 		goto exit;
 	}
 
@@ -1196,28 +1198,26 @@ static int __init pc87427_device_add(const struct pc87427_sio_data *sio_data)
 	pdev = platform_device_alloc(DRVNAME, res[0].start);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, res, res_count);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add_data(pdev, sio_data,
 				       sizeof(struct pc87427_sio_data));
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+		pr_err("Platform data allocation failed\n");
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
@@ -1249,23 +1249,23 @@ static int __init pc87427_find(int sioaddr, struct pc87427_sio_data *sio_data)
 
 		val = superio_inb(sioaddr, SIOREG_ACT);
 		if (!(val & 0x01)) {
-			printk(KERN_INFO DRVNAME ": Logical device 0x%02x "
-			       "not activated\n", logdev[i]);
+			pr_info("Logical device 0x%02x not activated\n",
+				logdev[i]);
 			continue;
 		}
 
 		val = superio_inb(sioaddr, SIOREG_MAP);
 		if (val & 0x01) {
-			printk(KERN_WARNING DRVNAME ": Logical device 0x%02x "
-			       "is memory-mapped, can't use\n", logdev[i]);
+			pr_warn("Logical device 0x%02x is memory-mapped, "
+				"can't use\n", logdev[i]);
 			continue;
 		}
 
 		val = (superio_inb(sioaddr, SIOREG_IOBASE) << 8)
 		    | superio_inb(sioaddr, SIOREG_IOBASE + 1);
 		if (!val) {
-			printk(KERN_INFO DRVNAME ": I/O base address not set "
-			       "for logical device 0x%02x\n", logdev[i]);
+			pr_info("I/O base address not set for logical device "
+				"0x%02x\n", logdev[i]);
 			continue;
 		}
 		sio_data->address[i] = val;
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 13e8d218e495..25e91665a0a2 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -689,6 +689,13 @@ static int __devexit via686a_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void via686a_update_fan_div(struct via686a_data *data)
+{
+	int reg = via686a_read_value(data, VIA686A_REG_FANDIV);
+	data->fan_div[0] = (reg >> 4) & 0x03;
+	data->fan_div[1] = reg >> 6;
+}
+
 static void __devinit via686a_init_device(struct via686a_data *data)
 {
 	u8 reg;
@@ -702,6 +709,9 @@ static void __devinit via686a_init_device(struct via686a_data *data)
 	via686a_write_value(data, VIA686A_REG_TEMP_MODE,
 			    (reg & ~VIA686A_TEMP_MODE_MASK)
 			    | VIA686A_TEMP_MODE_CONTINUOUS);
+
+	/* Pre-read fan clock divisor values */
+	via686a_update_fan_div(data);
 }
 
 static struct via686a_data *via686a_update_device(struct device *dev)
@@ -753,9 +763,7 @@ static struct via686a_data *via686a_update_device(struct device *dev)
 		    (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
 		     0xc0) >> 6;
 
-		i = via686a_read_value(data, VIA686A_REG_FANDIV);
-		data->fan_div[0] = (i >> 4) & 0x03;
-		data->fan_div[1] = i >> 6;
+		via686a_update_fan_div(data);
 		data->alarms =
 		    via686a_read_value(data,
 				       VIA686A_REG_ALARM1) |
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index c84b9b4e6960..eed43a008be1 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -33,6 +33,8 @@
 
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -1798,8 +1800,7 @@ w83781d_isa_found(unsigned short address)
 	 * individually for the probing phase. */
 	for (port = address; port < address + W83781D_EXTENT; port++) {
 		if (!request_region(port, 1, "w83781d")) {
-			pr_debug("w83781d: Failed to request port 0x%x\n",
-				 port);
+			pr_debug("Failed to request port 0x%x\n", port);
 			goto release;
 		}
 	}
@@ -1811,7 +1812,7 @@ w83781d_isa_found(unsigned short address)
 	if (inb_p(address + 2) != val
 	 || inb_p(address + 3) != val
 	 || inb_p(address + 7) != val) {
-		pr_debug("w83781d: Detection failed at step 1\n");
+		pr_debug("Detection failed at step %d\n", 1);
 		goto release;
 	}
 #undef REALLY_SLOW_IO
@@ -1820,14 +1821,14 @@ w83781d_isa_found(unsigned short address)
 	   MSB (busy flag) should be clear initially, set after the write. */
 	save = inb_p(address + W83781D_ADDR_REG_OFFSET);
 	if (save & 0x80) {
-		pr_debug("w83781d: Detection failed at step 2\n");
+		pr_debug("Detection failed at step %d\n", 2);
 		goto release;
 	}
 	val = ~save & 0x7f;
 	outb_p(val, address + W83781D_ADDR_REG_OFFSET);
 	if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
 		outb_p(save, address + W83781D_ADDR_REG_OFFSET);
-		pr_debug("w83781d: Detection failed at step 3\n");
+		pr_debug("Detection failed at step %d\n", 3);
 		goto release;
 	}
 
@@ -1835,7 +1836,7 @@ w83781d_isa_found(unsigned short address)
 	outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
 	val = inb_p(address + W83781D_DATA_REG_OFFSET);
 	if (val & 0x80) {
-		pr_debug("w83781d: Detection failed at step 4\n");
+		pr_debug("Detection failed at step %d\n", 4);
 		goto release;
 	}
 	outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
@@ -1844,19 +1845,19 @@ w83781d_isa_found(unsigned short address)
 	val = inb_p(address + W83781D_DATA_REG_OFFSET);
 	if ((!(save & 0x80) && (val != 0xa3))
 	 || ((save & 0x80) && (val != 0x5c))) {
-		pr_debug("w83781d: Detection failed at step 5\n");
+		pr_debug("Detection failed at step %d\n", 5);
 		goto release;
 	}
 	outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
 	val = inb_p(address + W83781D_DATA_REG_OFFSET);
 	if (val < 0x03 || val > 0x77) {	/* Not a valid I2C address */
-		pr_debug("w83781d: Detection failed at step 6\n");
+		pr_debug("Detection failed at step %d\n", 6);
 		goto release;
 	}
 
 	/* The busy flag should be clear again */
 	if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
-		pr_debug("w83781d: Detection failed at step 7\n");
+		pr_debug("Detection failed at step %d\n", 7);
 		goto release;
 	}
 
@@ -1871,7 +1872,7 @@ w83781d_isa_found(unsigned short address)
 		found = 1;
 
 	if (found)
-		pr_info("w83781d: Found a %s chip at %#x\n",
+		pr_info("Found a %s chip at %#x\n",
 			val == 0x30 ? "W83782D" : "W83781D", (int)address);
 
  release:
@@ -1894,21 +1895,19 @@ w83781d_isa_device_add(unsigned short address)
 	pdev = platform_device_alloc("w83781d", address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR "w83781d: Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR "w83781d: Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR "w83781d: Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 679718e6b017..63841f8cec07 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -691,7 +691,7 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr,
 }
 
 static ssize_t
-show_regs_chassis(struct device *dev, struct device_attribute *attr,
+show_chassis(struct device *dev, struct device_attribute *attr,
 			char *buf)
 {
 	struct w83792d_data *data = w83792d_update_device(dev);
@@ -699,6 +699,16 @@ show_regs_chassis(struct device *dev, struct device_attribute *attr,
 }
 
 static ssize_t
+show_regs_chassis(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	dev_warn(dev,
+		 "Attribute %s is deprecated, use intrusion0_alarm instead\n",
+		 "chassis");
+	return show_chassis(dev, attr, buf);
+}
+
+static ssize_t
 show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct w83792d_data *data = w83792d_update_device(dev);
@@ -706,7 +716,7 @@ show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf)
 }
 
 static ssize_t
-store_chassis_clear(struct device *dev, struct device_attribute *attr,
+store_chassis_clear_legacy(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -714,6 +724,10 @@ store_chassis_clear(struct device *dev, struct device_attribute *attr,
 	u32 val;
 	u8 temp1 = 0, temp2 = 0;
 
+	dev_warn(dev,
+		 "Attribute %s is deprecated, use intrusion0_alarm instead\n",
+		 "chassis_clear");
+
 	val = simple_strtoul(buf, NULL, 10);
 	mutex_lock(&data->update_lock);
 	data->chassis_clear = SENSORS_LIMIT(val, 0 ,1);
@@ -726,6 +740,27 @@ store_chassis_clear(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
+static ssize_t
+store_chassis_clear(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83792d_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	u8 reg;
+
+	if (strict_strtoul(buf, 10, &val) || val != 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	reg = w83792d_read_value(client, W83792D_REG_CHASSIS_CLR);
+	w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, reg | 0x80);
+	data->valid = 0;		/* Force cache refresh */
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
 /* For Smart Fan I / Thermal Cruise */
 static ssize_t
 show_thermal_cruise(struct device *dev, struct device_attribute *attr,
@@ -1012,7 +1047,9 @@ static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22);
 static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 23);
 static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL);
 static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR,
-			show_chassis_clear, store_chassis_clear);
+			show_chassis_clear, store_chassis_clear_legacy);
+static DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
+			show_chassis, store_chassis_clear);
 static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0);
 static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
 static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2);
@@ -1214,6 +1251,7 @@ static struct attribute *w83792d_attributes[] = {
 	&dev_attr_alarms.attr,
 	&dev_attr_chassis.attr,
 	&dev_attr_chassis_clear.attr,
+	&dev_attr_intrusion0_alarm.attr,
 	&sensor_dev_attr_tolerance1.dev_attr.attr,
 	&sensor_dev_attr_thermal_cruise1.dev_attr.attr,
 	&sensor_dev_attr_tolerance2.dev_attr.attr,
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index 8e540ada47d2..e3bdedfb5347 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -51,7 +51,6 @@
 #define WATCHDOG_TIMEOUT 2	/* 2 minute default timeout */
 
 /* Addresses to scan */
-static DEFINE_MUTEX(watchdog_mutex);
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
 						I2C_CLIENT_END };
 
@@ -421,14 +420,17 @@ store_beep_enable(struct device *dev, struct device_attribute *attr,
 
 /* Write any value to clear chassis alarm */
 static ssize_t
-store_chassis_clear(struct device *dev,
-		    struct device_attribute *attr, const char *buf,
-		    size_t count)
+store_chassis_clear_legacy(struct device *dev,
+			   struct device_attribute *attr, const char *buf,
+			   size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct w83793_data *data = i2c_get_clientdata(client);
 	u8 val;
 
+	dev_warn(dev, "Attribute chassis is deprecated, "
+		 "use intrusion0_alarm instead\n");
+
 	mutex_lock(&data->update_lock);
 	val = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
 	val |= 0x80;
@@ -437,6 +439,28 @@ store_chassis_clear(struct device *dev,
 	return count;
 }
 
+/* Write 0 to clear chassis alarm */
+static ssize_t
+store_chassis_clear(struct device *dev,
+		    struct device_attribute *attr, const char *buf,
+		    size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	u8 reg;
+
+	if (strict_strtoul(buf, 10, &val) || val != 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	reg = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
+	w83793_write_value(client, W83793_REG_CLR_CHASSIS, reg | 0x80);
+	data->valid = 0;		/* Force cache refresh */
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
 #define FAN_INPUT			0
 #define FAN_MIN				1
 static ssize_t
@@ -1102,6 +1126,8 @@ static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm);
 
 static struct sensor_device_attribute_2 sda_single_files[] = {
 	SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_chassis_clear_legacy, ALARM_STATUS, 30),
+	SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
 		      store_chassis_clear, ALARM_STATUS, 30),
 	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
 		      store_beep_enable, NOT_USED, NOT_USED),
@@ -1323,7 +1349,7 @@ static ssize_t watchdog_write(struct file *filp, const char __user *buf,
 static long watchdog_ioctl(struct file *filp, unsigned int cmd,
 			   unsigned long arg)
 {
-	static struct watchdog_info ident = {
+	struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING |
 			   WDIOF_SETTIMEOUT |
 			   WDIOF_CARDRESET,
@@ -1333,7 +1359,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd,
 	int val, ret = 0;
 	struct w83793_data *data = filp->private_data;
 
-	mutex_lock(&watchdog_mutex);
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		if (!nowayout)
@@ -1387,7 +1412,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd,
 	default:
 		ret = -ENOTTY;
 	}
-	mutex_unlock(&watchdog_mutex);
 	return ret;
 }
 
diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index cdbc7448491e..845232d7f611 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -458,6 +458,7 @@ static void w83795_update_limits(struct i2c_client *client)
 {
 	struct w83795_data *data = i2c_get_clientdata(client);
 	int i, limit;
+	u8 lsb;
 
 	/* Read the voltage limits */
 	for (i = 0; i < ARRAY_SIZE(data->in); i++) {
@@ -479,9 +480,8 @@ static void w83795_update_limits(struct i2c_client *client)
 	}
 
 	/* Read the fan limits */
+	lsb = 0; /* Silent false gcc warning */
 	for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
-		u8 lsb;
-
 		/* Each register contains LSB for 2 fans, but we want to
 		 * read it only once to save time */
 		if ((i & 1) == 0 && (data->has_fan & (3 << i)))