diff options
| author |   Grygorii Strashko <grygorii.strashko@ti.com> | 2019-10-23 17:48:45 +0300 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2019-10-25 19:24:47 -0700 |
| commit | 5a7f08c2abb0efc9d17aff2fc75d6d3b85e622e4 (patch) | |
| tree | a81f092fe973235e2afc6e959ca0f77a182927e6 /drivers | |
| parent | net: sch_generic: Use pfifo_fast as fallback scheduler for CAN hardware (diff) | |
| download | linux-dev-5a7f08c2abb0efc9d17aff2fc75d6d3b85e622e4.tar.xz linux-dev-5a7f08c2abb0efc9d17aff2fc75d6d3b85e622e4.zip | |
net: phy: dp83867: enable robust auto-mdix
The link detection timeouts can be observed (or link might not be detected
at all) when dp83867 PHY is configured in manual mode (speed/duplex).
CFG3[9] Robust Auto-MDIX option allows to significantly improve link detection
in case dp83867 is configured in manual mode and reduce link detection
time.
As per DM: "If link partners are configured to operational modes that are
not supported by normal Auto MDI/MDIX mode (like Auto-Neg versus Force
100Base-TX or Force 100Base-TX versus Force 100Base-TX), this Robust Auto
MDI/MDIX mode allows MDI/MDIX resolution and prevents deadlock."
Hence, enable this option by default as there are no known reasons
not to do so.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/phy/dp83867.c | 15 |
1 files changed, 10 insertions, 5 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 37fceaf9fa10..cf4455bbf888 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -95,6 +95,10 @@ #define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK (0x1f << 8) #define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8 +/* CFG3 bits */ +#define DP83867_CFG3_INT_OE BIT(7) +#define DP83867_CFG3_ROBUST_AUTO_MDIX BIT(9) + /* CFG4 bits */ #define DP83867_CFG4_PORT_MIRROR_EN BIT(0) @@ -410,12 +414,13 @@ static int dp83867_config_init(struct phy_device *phydev) phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL, val); } + val = phy_read(phydev, DP83867_CFG3); /* Enable Interrupt output INT_OE in CFG3 register */ - if (phy_interrupt_is_valid(phydev)) { - val = phy_read(phydev, DP83867_CFG3); - val |= BIT(7); - phy_write(phydev, DP83867_CFG3, val); - } + if (phy_interrupt_is_valid(phydev)) + val |= DP83867_CFG3_INT_OE; + + val |= DP83867_CFG3_ROBUST_AUTO_MDIX; + phy_write(phydev, DP83867_CFG3, val); if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP) dp83867_config_port_mirroring(phydev); |